Home > PLUMBING > ROUGH PLUMBING SUPPLIES > GAS SUPPLY LINES > FLEXIBLE GAS PIPING SYSTEM
Choose a sub category:
CORRUGATED SS TUBING-PROFLEX BRASS FITTINGS/ACCESSO-PROFLEX
Sort By:
1
Harvey's 017072B-500 Pipe Thread Seal Tape Genova Products 80120 ABS-DWV Coupling Mintcraft PMB-445 Pipe Seal Tape
0.4 density, 0.003" thick. Over 50% elongation and chemically inert. Provides a strong tight seal for any threaded joint and permits easy disassembly. Tolerates -400 to + 500 degree Fahrenheit. Suitable for use on oxygen systems. Non-toxic and non-flammable. Meets Federal Specification T-27730A. Used to join straight lengths of pipe in drain-waste-vent applications. Conforms to ASTM D2661 and NSF-DWV. Accepted by FHA. Mintcraft Plumbers Tape, 1/2 in Width, 300 ft Length, PTFE Backing, For Fixes Leaks and Loose Pipes
Genova Products 80115 ABS-DWV Coupling Harvey's 017117B Pipe Thread Seal Tape Genova Products 80415 ABS-DWV Male Adapter
Used to join straight lengths of pipe in drain-waste-vent applications. Conforms to ASTM D2661 and NSF-DWV. Accepted by FHA. 0.4 density, 0.003" thick. Over 50% elongation and chemically inert. Provides a strong tight seal for any threaded joint and permits easy disassembly. Tolerates -400 to + 500 degree Fahrenheit. Suitable for use on oxygen systems. Non-toxic and non-flammable. Meets Federal Specification T-27730A. Adapts to standard female pipe threads in drain-waste-vent applications. Teflon thread tape is recommended for threaded joints. Conforms to ASTM D2661 and NSF-DWV. Accepted by FHA.
Plumb Pak 04151 Pipe Thread Seal Tape Genova Products 83615 ABS-DWV 45 Degree Sanitary Elbow Genova Products 82815 ABS-DWV 90 Degree Sanitary Elbow
Plumb Pak Thread Seal Tape, 1/2 in Width, 520 in Length, PTFE Backing, For Threaded Pipe Used to change direction in piping in drain-waste-vent applications. Sometimes called an eighth bend. Conforms to ASTM D2661 and NSF-DWV. Accepted by FHA. Used to change direction in piping in drain-waste-vent applications. Sometimes called a quarter bend. Conforms to ASTM D2661 and NSF-DWV. Accepted by FHA.
Pro-Flex PFIM-0001 Pro-Flex Installation/Training Guide Genova Products 82715 ABS-DWV 45 Degree Street Elbow Genova Products 80130 ABS-DWV Coupling
All installers must purchase and read the Installation/ Training Guide and return the qualified installer card on the back cover to Pro-Flex, LLC. All installations must be performed by a qualified person recognized by the local jurisdiction as capable of performing such work. Used to change direction from a fitting hub to a pipe in drain-waste-vent applications. Sometimes called a street eighth bend. Conforms to ASTM D2661 and NSF-DWV. Accepted by FHA. Used to join straight lengths of pipe in drain-waste-vent applications. Conforms to ASTM D2661 and NSF-DWV. Accepted by FHA.
Genova Products 80715 ABS-DWV90 Degree Vent Elbow Genova Products 83620 ABS-DWV 45 Degree Sanitary Elbow Genova Products 80315 ABS-DWV Female Adapter
Used to change direction in the dry portion of vent piping where water flow is not a consideration. Sometimes called a short turn quarter bend. Conforms to ASTM D2661 and NSF-DWV. Accepted by FHA. Used to change direction in piping in drain-waste-vent applications. Sometimes called an eighth bend. Conforms to ASTM D2661 and NSF-DWV. Accepted by FHA. Adapts to standard male pipe threads in drain-waste-vent applications. Teflon thread tape is recommended for threaded joints. Conforms to ASTM D2661 and NSF-DWV. Accepted by FHA.
Genova Products 82720 ABS-DWV 45 Degree Street Elbow Sched 40 Genova Products 82820 ABS-DWV 90 Degree Sanitary Elbow Plumb Pak PP20855100 Pipe Thread Seal Tape
Used to change direction from a fitting hub to a pipe in drain-waste-vent applications. Sometimes called a street eighth bend. Conforms to ASTM D2661 and NSF-DWV. Accepted by FHA. Used to change direction in piping in drain-waste-vent applications. Sometimes called a quarter bend. Conforms to ASTM D2661 and NSF-DWV. Accepted by FHA. For use on plumbing threads to prevent leaking.
Harvey's 017209B Pipe Thread Seal Tape Genova 82311 Abs-DWV Fitting Genova Products 82315 ABS-DWV Trap Adapter
0.4 density, 0.003" thick. Over 50% elongation and chemically inert. Provides a strong tight seal for any threaded joint and permits easy disassembly. Tolerates -400 to + 500 degree Fahrenheit. Suitable for use on oxygen systems. Non-toxic and non-flammable. Meets Federal Specification T-27730A. Utilized to adapt ABS fitting hub to tubular traps at wall or floor. Solvent welds into an 1-1/2" DWV fitting hub. Conforms to ASTM D2661 and NSF-DWV. Accepted by FHA. Utilized to adapt ABS fitting hub to tubular traps at wall or floor. Solvent welds into an 1-1/2" DWV fitting hub. Conforms to ASTM D2661 and NSF-DWV. Accepted by FHA.
Genova Products 82916 ABS-DWV 90 Degree Street Elbow Genova 80915 ABS-DWV Fitting Genova Products 82215 ABS-DWV Female Trap Adapter
Used to change direction in piping in drain-waste-vent applications. Sometimes called a street quarter bend. Conforms to ASTM D2661 and NSF-DWV. Accepted by FHA. Used to change direction in piping in drain-waste-vent applications. Sometimes called an sixth bend. Conforms to ASTM D2661 and NSF-DWV. Accepted by FHA. Utilized to adapt ABS pipe to tubular traps at wall or floor. Solvent welds over 1-1/2" DWV pipe. Sometimes called a Marvel. Conforms to ASTM D2661 and NSF-DWV. Accepted by FHA.
Pro-Flex PFSP-0302 Pro-Flex Striker Plate Harvey's 023015-48 Pipe Joint Compound Genova S45233 Downspout Adapter
Protective devices required where tubing passes through structural members. White thread lubricant and sealant. Brushable paste dries slowly, non-hardening, withstands up to 3000 PSI on gases at temps from -50d F to +500d F. Use on water, steam, natural and LP gas, oils, fuels, dilute acids. Apply to metals, PVC, CPVC, ABS, polypropylene and nylon. All-purpose sealant for HEAVY DUTY applications. Warning: Never use any pipe thread sealant paste or stick on halogens or oxygen; use PTFE Pipe Thread Tape. Used to connect rain gutter downspouts to underground sewer piping. Conforms to ASTM D2852.
Genova Products 82211 ABS-DWV Female Trap Adapter Genova Products 80121 ABS-DWV Reducing Coupling Genova Products 80820 ABS-DWV 22-1/2 Degree Elbow
Utilized to adapt ABS pipe to tubular traps at wall or floor. Solvent welds over 1-1/2" DWV pipe. Sometimes called a Marvel. Conforms to ASTM D2661 and NSF-DWV. Accepted by FHA. Used to reduce or increase pipe sizes in drain-waste-vent applications. Conforms to ASTM D2661 and NSF-DWV. Accepted by FHA. Used to change direction in piping in drain-waste-vent applications. Sometimes called a sixteenth bend. Conforms to ASTM D2661 and NSF-DWV. Accepted by FHA.
Genova 80320 Abs-DWV Fitting Harvey 030005-144 Pipe Thread Compound Genova 80420 Abs-DWV Fitting
Adapts to standard male pipe threads in drain-waste-vent applications. Teflon thread tape is recommended for threaded joints. Conforms to ASTM D2661 and NSF-DWV. Accepted by FHA. Pipe thread compound in stick form. Lubricates, seals and prevents rust and corrosion. Use pipe stick on pressures to 2,000 PSI, temperatures to 350 degrees Fahrenheit for metal pipe carrying water, steam, air, ammonia, gasoline, natural gas,  butane, propane, freon, petroleum oil.  DO NOT USE ON OXYGEN SYSTEMS. Adapts to standard female pipe threads in drain-waste-vent applications. Teflon thread tape is recommended for threaded joints. Conforms to ASTM D2661 and NSF-DWV. Accepted by FHA.
Genova Products 82926 ABS-DWV 90 Degree Street Elbow Harvey's 017252-144 Pipe Thread Seal Tape Pro-Flex Floppy-Flex Protective Conduit
Used to change direction in piping in drain-waste-vent applications. Sometimes called a street quarter bend. Conforms to ASTM D2661 and NSF-DWV. Accepted by FHA. 0.4 density, 0.003" thick. Over 50% elongation and chemically inert. Provides a strong tight seal for any threaded joint and permits easy disassembly. Tolerates -400 to + 500 degree Fahrenheit. Suitable for use on oxygen systems. Non-toxic and non-flammable. Meets Federal Specification T-27730A. 12" long floppy-flex galvanized protective conduits for CSST tubing.
Genova Products 83815 ABS-DWV 90 Deg Long Sweep Elbow Genova Products 80720 ABS-DWV 90 Degree Vent Elbow Oatey 31229 Great White
Used to change direction in piping in drain-waste-vent applications. Sometimes called a long turn quarter bend. Conforms to ASTM D2661 and NSF-DWV. Accepted by FHA. Used to change direction in the dry portion of vent piping where water flow is not a consideration. Sometimes called a short turn quarter bend. Conforms to ASTM D2661 and NSF-DWV. Accepted by FHA. Lubricates and seals all threaded joints. White, non-hardening, non-separating, non-toxic paste. Withstands up to 3,000 PSI on gases from -50 to +400 degrees Fahrenheit, and 10,000 PSI on liquids from -50 to +500 degrees Fahrenheit. For use with water, steam, natural and LP gas, oil, caustics or dilute acid lines of PVC, CPVC, ABS, Cycolac, Polypropylene, iron, steel, or copper. NSF and IAPMO listed. Brush included.
Harvey's 017165-144 Pipe Thread Seal Tape Harvey's 039300 Gas Leak Detectors Genova Products 83820 ABS-DWV 90 Degree Long Sweep Elbow
0.4 density, 0.003" thick. Over 50% elongation and chemically inert. Provides a strong tight seal for any threaded joint and permits easy disassembly. Tolerates -400 to + 500 degree Fahrenheit. Suitable for use on oxygen systems. Non-toxic and non-flammable. Meets Federal Specification T-27730A. Detects any gas leak in just a few seconds on all types of tubing, valve, cylinders, pressurized tanks, or any system under air, gas or oxygen pressure. May be used at temperatures between -50 to +160 degrees Fahrenheit. Non-toxic, biodegradable, user friendly, non-corrosive and non-irritating to most skin. Used to change direction in piping in drain-waste-vent applications. Sometimes called a long turn quarter bend. Conforms to ASTM D2661 and NSF-DWV. Accepted by FHA.
Oatey 31403 Gas Line Thread Tape Oatey 31402D Water Line Thread Seal Tape Harvey's 017065 Pipe Thread Seal Tape
Manufactured especially for natural gas, propane, butane, water, oil and chemical lines. Heavier than white tape with density of 1.35 - 1.5 grams/cubic centimeter and 4 Mil thick. Complies with MIL-T-22230A (ASG), UL 31 RO, AGA 3226 and CAN/ULC-S642. Spool - dispenser box. Provides fast positive seal for water lines, sewage lines, and sprinkler systems.  Effective on metal or plastic threads. 3 Mils thick, and density of 1.35 - 1.5 grams/cubic centimeter. Complies with MIL-T-27730A and UL 31 RO. Spool- display carton. Extra heavy, full density tape especially for gas lines. Recommended leakproof sealant for lines carrying natural gas, propane, butane, water, oil and chemical installations. Use on plastic, stainless steel, aluminum and all metals, ceramic, synthetic rubber, monel and carbon pipe, conduit, valves, bolts, anything with a thread. Suitable for use on oxygen systems. Permits easy disassembly. Pressure rating 10,000 PSI; .0035 mil thick, tolerates -450 to +500 degrees Fahrenheit. Meets Federal Specification T-27730A. U.L. Listed.
Harvey's 029035 Pipe Thread Compound Rectorseal 23710 T-Plus 2 Pipe Thread Sealant Genova Products 80140 ABS-DWV Coupling
Gray, non-drip paste for pipe joint threads on lines carrying water, steam, air or natural gas. Prevents corrosion to threads. Never hardens, joints separate easily. Contains no lead, non-toxic. Do not apply to plastic threads. Use Harvey's TFE Paste or PTFE Tape made of TEFLON on plastic threaded joints. Brushtop bottle. Non-setting, multi-purpose compound contains teflon, plus synthetic fibers.  May be pressurized immediately following application.  Recommended for use on threaded galvanized steel, iron, brass, copper, aluminum, stainless steel, polyethylene, fiberglass reinforced, PVC, CPVC, and ABS pipe. Conforms to TT-1732. Used to join straight lengths of pipe in drain-waste-vent applications. Conforms to ASTM D2661 and NSF-DWV. Accepted by FHA.
Pro-Flex PFSP-0307 Pro-Flex Striker Plate Genova 400 Sewer and Drain Bull Nose Tee Plumb Pak PP854-2 Pipe Joint Compound
Protective devices required where tubing passes through structural members. Used primarily in seepage bed piping grids in conjunction with perforated pipe. Used where flow characteristics are not a primarily consideration. Conforms to ASTM D2852. Plumb Pak Pipe Joint Compound, 2 oz, Tube Packing
Pro-Flex Floppy-Flex Protective Conduit Rectorseal 25790 Pipe Thread Sealant Genova Products 80330 ABS-DWV Female Adapter
12" long floppy-flex galvanized protective conduits for CSST tubing. Soft-set, slow drying compound seals, lubricates, protects threaded pipe and fittings.  Can be pressurized immediately for piping up through 2" and 100 psi. Recommended for use on threaded galvanized steel, iron, brass, copper, aluminum, stainless steel, polyethylene, fiberglass reinforced, and PVC pipe.  Conforms to TT-S-1932. Adapts to standard male pipe threads in drain-waste-vent applications. Teflon thread tape is recommended for threaded joints. Conforms to ASTM D2661 and NSF-DWV. Accepted by FHA.
Genova Products 82830 ABS-DWV 90 Degree Sanitary Elbow Genova Products 82936 ABS-DWV 90 Degree Sanitary Straight Elbow Oatey 31230 Great White
Used to change direction in piping in drain-waste-vent applications. Sometimes called a quarter bend. Conforms to ASTM D2661 and NSF-DWV. Accepted by FHA. Used to change direction in piping in drain-waste-vent applications. Sometimes called a street quarter bend. Conforms to ASTM D2661 and NSF-DWV. Accepted by FHA. Lubricates and seals all threaded joints. White, non-hardening, non-separating, non-toxic paste. Withstands up to 3,000 PSI on gases from -50 to +400 degrees Fahrenheit, and 10,000 PSI on liquids from -50 to +500 degrees Fahrenheit. For use with water, steam, natural and LP gas, oil, caustics or dilute acid lines of PVC, CPVC, ABS, Cycolac, Polypropylene, iron, steel, or copper. NSF and IAPMO listed. Brush included.
Duraspout 45344 Downspout Adapter Genova 80132 Abs-DWV Fitting Genova 80430 Abs-DWV Fitting
Used to connect rain gutter downspouts to underground sewer piping. Used to reduce or increase pipe sizes in drain-waste-vent applications. Conforms to ASTM D2661 and NSF-DWV. Accepted by FHA. Adapts to standard female pipe threads in drain-waste-vent applications. Teflon thread tape is recommended for threaded joints. Conforms to ASTM D2661 and NSF-DWV. Accepted by FHA.
Brass Craft PS1087 Seal 'N Check Kit Genova Products 80630 ABS-DWV 45 Degree Elbow Plumb Pak PP854-1 Pipe Thread Sealant
Pipe thread sealant is used to seal male to female pipe threads. The leak detection solution is applied (poured) on the joints of a gas installation to detect unsafe seals in the component-to-component connections (shut-off valve to adapter to gas connector, and gas connector to adapter to appliance regulator). Bubbles in the solution will indicate a leak. The pipe thread sealant is preferred over gas PTFE tape because of its fluidity - it seals up the crevices of the Male to Female thread engagement and provides a better seal. The leak detection solution does not contain soap or detergents, eliminating a false reading. Used to change direction in piping in drain-waste-vent applications. Sometimes called an eighth bend. Conforms to ASTM D2661 and NSF-DWV. Accepted by FHA. Plumb Pak Pipe Thread Sealant, Teflon, 1 oz, Tube Packing
Harvey's 023030 Pipe Joint Compound Harvey's 025020 Pipe Thread Compound Genova 80131 ABS-DWV Fitting
White thread lubricant and sealant. Brushable paste dries slowly, non-hardening, withstands up to 3000 PSI on gases at temps from -50d F to +500d F. Use on water, steam, natural and LP gas, oils, fuels, dilute acids. Apply to metals, PVC, CPVC, ABS, polypropylene and nylon. All-purpose sealant for HEAVY DUTY applications. Warning: Never use any pipe thread sealant paste or stick on halogens or oxygen; use PTFE Pipe Thread Tape. Use on all metals, plastic PVC, CPVC, ABS and nylon threads. Tolerates -50 F to +400 degrees Fahrenheit; gas to 3000 PSI, liquid to 6000 PSI. Soft, slow drying, never seizes, allows easy disassembly. SEALANT for all types of gas lines.  Brushtop bottle. Used to reduce or increase pipe sizes in drain-waste-vent applications. Conforms to ASTM D2661 and NSF-DWV. Accepted by FHA.
Brass Craft PSC1094L Gas Leak Detectors Duraspout 46344 Offset Downspout Adapter Genova Products 83830 ABS-DWV 90 Degree Long Sweep Elbow
Used for natural, LP gas, mixed, manufactured, and LP gas-air mixtures. Used to connect rain gutter downspouts to underground sewer piping. Used to change direction in piping in drain-waste-vent applications. Sometimes called a long turn quarter bend. Conforms to ASTM D2661 and NSF-DWV. Accepted by FHA.
Genova Products 80340 ABS-DWV Female Adapter Rectorseal 31631 Tru-Blu Genova Products 80640 ABS-DWV 45 Degree Elbow
Adapts to standard male pipe threads in drain-waste-vent applications. Teflon thread tape is recommended for threaded joints. Conforms to ASTM D2661 and NSF-DWV. Accepted by FHA. Fast drying, adhesive thread sealant especially suited for high vibration environments such as refrigeration or compressor applications. Stays flexible - designed for areas of high vibration and thermal expansion/contraction. Can also be used as a positive lock and seal on threaded fasteners. Lead free and contains no metal. For use with water (hot or cold). Brushable from 20 degree F to 140 degree F. Excellent as a gasket adhesive on flanges. Low odor, non-separating. Lubricates and protects threads. Easy application - brush top applicator. Meets Federal Specification TT-S-1732. Used to change direction in piping in drain-waste-vent applications. Sometimes called an eighth bend. Conforms to ASTM D2661 and NSF-DWV. Accepted by FHA.
Harvey's 029048 Pipe Thread Compound Pro-Flex PFAP-1210 Pro-Flex Accessory Pack Oatey 15420 Pro Dope
Gray, non-drip paste for pipe joint threads on lines carrying water, steam, air or natural gas. Prevents corrosion to threads. Never hardens, joints separate easily. Contains no lead, non-toxic. Do not apply to plastic threads. Use Harvey's TFE Paste or PTFE Tape made of TEFLON on plastic threaded joints. Brushtop bottle. Includes: 4 retainer rings,  2 each - slide rings, silicone O-rings, high temperature sealing gaskets. Replacement parts for lost or broken components. Standard oil-based thread sealant ensures exceptional leak-proof joints. For use on metal pipe and fittings carrying water, natural gas, air, steam, ammonia, brine, diluted acids, and alkalis. Uniform, smooth consistency provides for an easy application; will not drip or spill out of container. Long shelf life. Non-setting formula will not harden, crack or become brittle. Lubricates as it forms a tight pressure seal. Inhibits rust and corrosion. Wipes clean from hands. Withstands air/steam pressure to 200 psi and liquid pressure to 250 psi at temperatures ranging from 0 deg F to 350 deg F. NOT FOR LP GAS. Not for use on plastic pipe or fittings. Certified to ANSI/NSF Standard 61, safe for drinking water lines. Meets Fed. Spec. TT-S-1732. Gray.
Oatey 15804 Hercules Pipe Thread Sealant Genova 82740 ABS-DWV Fitting Genova Products 82840 ABS-DWV 90 Degree Sanitary Elbow
For use on both plastic and metal pipe and fittings. Grit-free and does not contain PTFE (teflon). Sets soft; no cure time required. Never hardens, cracks or becomes brittle. No odor. Non-separating, non-flammable, and non-hazardous. Leak-proof hydraulic resistance to 12,000 psi. Withstands gas pressure to 2,600 psi. Performs over a temperature range of -50 degrees to 400 degrees F (on steel pipe). For use on all metals, including galvanized steel, black iron, aluminum, copper, brass, stainless steel, and on PVC, ABS, and CPVC plastics (for use on specific brands of CPVC pipe, verify suitability with pipe manufacturer). Not recommended for lines carrying concentrated acids, alkalis, ketones, and oxygen. Certified to ANSI/NSF Standard 61; safe for drinking water lines. UPC listed. Meets CSA requirements 4-90 for gas. Meets Fed. Spec. TT-S-1732. Used to change direction from a fitting hub to a pipe in drain-waste-vent applications. Sometimes called a street eighth bend. Conforms to ASTM D2661 and NSF-DWV. Accepted by FHA. Used to change direction in piping in drain-waste-vent applications. Sometimes called a quarter bend. Conforms to ASTM D2661 and NSF-DWV. Accepted by FHA.
Rectorseal 25631 Pipe Thread Sealant Rectorseal 23631 T-Plus 2 Pro-Flex PFBC-AB Pro-Flex Bonding Clamps
Soft-set, slow drying compound seals, lubricates, protects threaded pipe and fittings.  Can be pressurized immediately for piping up through 2" and 100 psi. Recommended for use on threaded galvanized steel, iron, brass, copper, aluminum, stainless steel, polyethylene, fiberglass reinforced, and PVC pipe.  Conforms to TT-S-1932. Non-setting, multi-purpose compound contains teflon, plus synthetic fibers.  May be pressurized immediately following application.  Recommended for use on threaded galvanized steel, iron, brass, copper, aluminum, stainless steel, polyethylene, fiberglass reinforced, PVC, CPVC, and ABS pipe. Conforms to TT-1732. UL467 bronze bonding clamp. Bonding of the gas system is required with all installations of Pro-Flex CSST.
Harvey's 023045 Pipe Joint Compound Pro-Flex PFAP-3410 Pro-Flex Accessory Pack Genova 80440 Abs-DWV Fitting
White thread lubricant and sealant. Brushable paste dries slowly, non-hardening, withstands up to 3000 PSI on gases at temps from -50d F to +500d F. Use on water, steam, natural and LP gas, oils, fuels, dilute acids. Apply to metals, PVC, CPVC, ABS, polypropylene and nylon. All-purpose sealant for HEAVY DUTY applications. Warning: Never use any pipe thread sealant paste or stick on halogens or oxygen; use PTFE Pipe Thread Tape. Includes: 4 retainer rings,  2 each - slide rings, silicone O-rings, high temperature sealing gaskets. Replacement parts for lost or broken components. Adapts to standard female pipe threads in drain-waste-vent applications. Teflon thread tape is recommended for threaded joints. Conforms to ASTM D2661 and NSF-DWV. Accepted by FHA.
Harvey's 025050 Pipe Thread Compound Pro-Flex PFMF-1212 Tube To Pipe Adapter Genova Products 83840 ABS-DWV 90 Degree Long Sweep Elbow
Use on all metals, plastic PVC, CPVC, ABS and nylon threads. Tolerates -50 F to +400 degrees Fahrenheit; gas to 3000 PSI, liquid to 6000 PSI. Soft, slow drying, never seizes, allows easy disassembly. SEALANT for all types of gas lines.  Brushtop bottle. Includes all components (Retainer Ring, Slide Ring, O-ring, and High Temperature Gasket) required to assemble to Pro-Flex tubing. Used to change direction in piping in drain-waste-vent applications. Sometimes called a long turn quarter bend. Conforms to ASTM D2661 and NSF-DWV. Accepted by FHA.
Oatey 15427 Pro Dope Plumb Pak PP855-1 Pipe Thread Seal Tape Pro-Flex PFFN-1212 Tube To Pipe Adapter
Standard oil-based thread sealant ensures exceptional leak-proof joints. For use on metal pipe and fittings carrying water, natural gas, air, steam, ammonia, brine, diluted acids, and alkalis. Uniform, smooth consistency provides for an easy application; will not drip or spill out of container. Long shelf life. Non-setting formula will not harden, crack or become brittle. Lubricates as it forms a tight pressure seal. Inhibits rust and corrosion. Wipes clean from hands. Withstands air/steam pressure to 200 psi and liquid pressure to 250 psi at temperatures ranging from 0 deg F to 350 deg F. NOT FOR LP GAS. Not for use on plastic pipe or fittings. Certified to ANSI/NSF Standard 61, safe for drinking water lines. Meets Fed. Spec. TT-S-1732. Gray. For use on plumbing threads to prevent leaking. Includes all components (Retainer Ring, Slide Ring, O-ring, and High Temperature Gasket) required to assemble to Pro-Flex tubing.
Oatey 15806 Hercules Pipe Thread Sealant Rectorseal 23551 T-Plus 2 Pipe Thread Sealant Rectorseal 25551 Pipe Thread Sealant
For use on both plastic and metal pipe and fittings. Grit-free and does not contain PTFE (teflon). Sets soft; no cure time required. Never hardens, cracks or becomes brittle. No odor. Non-separating, non-flammable, and non-hazardous. Leak-proof hydraulic resistance to 12,000 psi. Withstands gas pressure to 2,600 psi. Performs over a temperature range of -50 degrees to 400 degrees F (on steel pipe). For use on all metals, including galvanized steel, black iron, aluminum, copper, brass, stainless steel, and on PVC, ABS, and CPVC plastics (for use on specific brands of CPVC pipe, verify suitability with pipe manufacturer). Not recommended for lines carrying concentrated acids, alkalis, ketones, and oxygen. Certified to ANSI/NSF Standard 61; safe for drinking water lines. UPC listed. Meets CSA requirements 4-90 for gas. Meets Fed. Spec. TT-S-1732. Non-setting, multi-purpose compound contains teflon, plus synthetic fibers.  May be pressurized immediately following application.  Recommended for use on threaded galvanized steel, iron, brass, copper, aluminum, stainless steel, polyethylene, fiberglass reinforced, PVC, CPVC, and ABS pipe. Conforms to TT-1732. Soft-set, slow drying compound seals, lubricates, protects threaded pipe and fittings.  Can be pressurized immediately for piping up through 2" and 100 psi. Recommended for use on threaded galvanized steel, iron, brass, copper, aluminum, stainless steel, polyethylene, fiberglass reinforced, and PVC pipe.  Conforms to TT-S-1932.
Genova 400 Pipe Cross Pro-Flex PFMF-3406 Tube To Pipe Adapter Plumb Pak PP855-100 Pipe Thread Seal Tape
Used to connect two branch lines approaching a main sewer pipe from opposing directions. Used primarily in seepage bed grid in conjunction with perforated pipe. Includes all components (Retainer Ring, Slide Ring, O-ring, and High Temperature Gasket) required to assemble to Pro-Flex tubing. For use on plumbing threads to prevent leaking.
Pro-Flex PFFN-3406 Tube To Pipe Adapter Pro-Flex PFBC-CDEA Pro-Flex Bonding Clamps Harvey's 025080 Pipe Thread Compound
Includes all components (Retainer Ring, Slide Ring, O-ring, and High Temperature Gasket) required to assemble to Pro-Flex tubing. UL467 bronze bonding clamp. Bonding of the gas system is required with all installations of Pro-Flex CSST. Use on all metals, plastic PVC, CPVC, ABS and nylon threads. Tolerates -50 F to +400 degrees Fahrenheit; gas to 3000 PSI, liquid to 6000 PSI. Soft, slow drying, never seizes, allows easy disassembly. SEALANT for all types of gas lines.  Brushtop bottle.
Oatey 15808 Hercules Pipe Thread Sealant Rectorseal 25431 Pipe Thread Sealant Rectorseal 23431 T-Plus 2 Pipe Thread Sealant
For use on both plastic and metal pipe and fittings. Grit-free and does not contain PTFE (teflon). Sets soft; no cure time required. Never hardens, cracks or becomes brittle. No odor. Non-separating, non-flammable, and non-hazardous. Leak-proof hydraulic resistance to 12,000 psi. Withstands gas pressure to 2,600 psi. Performs over a temperature range of -50 degrees to 400 degrees F (on steel pipe). For use on all metals, including galvanized steel, black iron, aluminum, copper, brass, stainless steel, and on PVC, ABS, and CPVC plastics (for use on specific brands of CPVC pipe, verify suitability with pipe manufacturer). Not recommended for lines carrying concentrated acids, alkalis, ketones, and oxygen. Certified to ANSI/NSF Standard 61; safe for drinking water lines. UPC listed. Meets CSA requirements 4-90 for gas. Meets Fed. Spec. TT-S-1732. Soft-set, slow drying compound seals, lubricates, protects threaded pipe and fittings.  Can be pressurized immediately for piping up through 2" and 100 psi. Recommended for use on threaded galvanized steel, iron, brass, copper, aluminum, stainless steel, polyethylene, fiberglass reinforced, and PVC pipe.  Conforms to TT-S-1932. Non-setting, multi-purpose compound contains teflon, plus synthetic fibers.  May be pressurized immediately following application.  Recommended for use on threaded galvanized steel, iron, brass, copper, aluminum, stainless steel, polyethylene, fiberglass reinforced, PVC, CPVC, and ABS pipe. Conforms to TT-1732.
Harvey's 028005-144 Pipe Thread Compound Display Oatey 31226 Pipe Joint Compound Pro-Flex PFST-12 Pro-Flex Termination Plates
For sealing and lubricating threaded pipe joints. In smooth paste form. For steam, water, air, and natural gas. Does not contain lead. Wipes clean from hands. Hang tab tube. Fast set non-hardening paste which lubricates and seals threaded joints. Non-toxic; may be used on water, natural gas, steam and air lines. Perfect for applying gaskets to flanges. Not for use on plastic threads. Includes attached fitting complete with all components (Retainer Ring, Slide Ring, O-ring, and High Temperature Gasket) required to assemble to Pro-Flex tubing.
Pro-Flex PFTE-BBB6 Tube Tee Pro-Flex PFMN-CCB 4-Port Pipe Manifold Pro-Flex PFMN-BBB 4-Port Pipe Manifold
Includes all components (Retainer Ring, Slide Ring, O-ring, and High Temperature Gasket) required to assemble each branch to Pro-Flex tubing. Each manifold has 4 1/2" female (FIP) branches. Each manifold has 4 1/2" female (FIP) branches.
Pro-Flex PFST-34 Pro-Flex Termination Plates Pro-Flex PFTE-CCB6 Tube Tee PLUMBERS TAPE 1/2X.004X260IN
Includes attached fitting complete with all components (Retainer Ring, Slide Ring, O-ring, and High Temperature Gasket) required to assemble to Pro-Flex tubing. Includes all components (Retainer Ring, Slide Ring, O-ring, and High Temperature Gasket) required to assemble each branch to Pro-Flex tubing.
Pro-Flex PFCT-1225 Pro-Flex Pro-Flex PFCT-3425 Pro-Flex Pro-Flex PFSAGK-2000 Pro-Flex Gas Appliance Kit
Flexible 304 stainless steel with yellow polyethylene jacketing. All tubing clearly marked with gas pressure rating, EHD (Equivalent Hydraulic Diameter). Tested to the ANSI Standards for Fuel Gas Piping System using Corrugated Stainless Steel Tubing(CSST), ANSI LC-1a-2009, CSA 6.26a-2009, ANSI LC-1-2005 and CSA 6.26-2005. Flexible 304 stainless steel with yellow polyethylene jacketing. All tubing clearly marked with gas pressure rating, EHD (Equivalent Hydraulic Diameter). Tested to the ANSI Standards for Fuel Gas Piping System using Corrugated Stainless Steel Tubing(CSST), ANSI LC-1a-2009, CSA 6.26a-2009, ANSI LC-1-2005 and CSA 6.26-2005. Includes: 25 ft. 1/2"  CSST flexible gas piping, one 1/2"  brass male fitting, one 1/2" special termination plate with male fittings, 1/2" MIP x 1/2" FIP ball valve connector - 24" long, 1/2" flare x 3/8" MIP union fitting, spool of yellow teflon tape, bottle leak detector, bonding clamp, installation/training guide and fitting assembly sheet.
Harvey's 017031-144 Pipe Thread Seal Tape Pro-Flex PFCT-1275 Pro-Flex Harvey's 017209-144 Pipe Thread Seal Tape
0.4 density, 0.003" thick. Over 50% elongation and chemically inert. Provides a strong tight seal for any threaded joint and permits easy disassembly. Tolerates -400 to + 500 degree Fahrenheit. Suitable for use on oxygen systems. Non-toxic and non-flammable. Meets Federal Specification T-27730A. Flexible 304 stainless steel with yellow polyethylene jacketing. All tubing clearly marked with gas pressure rating, EHD (Equivalent Hydraulic Diameter). Tested to the ANSI Standards for Fuel Gas Piping System using Corrugated Stainless Steel Tubing(CSST), ANSI LC-1a-2009, CSA 6.26a-2009, ANSI LC-1-2005 and CSA 6.26-2005. 0.4 density, 0.003" thick. Over 50% elongation and chemically inert. Provides a strong tight seal for any threaded joint and permits easy disassembly. Tolerates -400 to + 500 degree Fahrenheit. Suitable for use on oxygen systems. Non-toxic and non-flammable. Meets Federal Specification T-27730A.
Pro-Flex PFCT-3475 Pro-Flex Pro-Flex PFCT-12225 Pro-Flex Pro-Flex PFCT-34225 Pro-Flex
Flexible 304 stainless steel with yellow polyethylene jacketing. All tubing clearly marked with gas pressure rating, EHD (Equivalent Hydraulic Diameter). Tested to the ANSI Standards for Fuel Gas Piping System using Corrugated Stainless Steel Tubing(CSST), ANSI LC-1a-2009, CSA 6.26a-2009, ANSI LC-1-2005 and CSA 6.26-2005. Flexible 304 stainless steel with yellow polyethylene jacketing. All tubing clearly marked with gas pressure rating, EHD (Equivalent Hydraulic Diameter). Tested to the ANSI Standards for Fuel Gas Piping System using Corrugated Stainless Steel Tubing(CSST), ANSI LC-1a-2009, CSA 6.26a-2009, ANSI LC-1-2005 and CSA 6.26-2005. Flexible 304 stainless steel with yellow polyethylene jacketing. All tubing clearly marked with gas pressure rating, EHD (Equivalent Hydraulic Diameter). Tested to the ANSI Standards for Fuel Gas Piping System using Corrugated Stainless Steel Tubing(CSST), ANSI LC-1a-2009, CSA 6.26a-2009, ANSI LC-1-2005 and CSA 6.26-2005.
   
 
1