Home > PLUMBING > ROUGH PLUMBING SUPPLIES > VALVES > VALVE BOXES & COVERS
Choose a sub category:
ABS - DWV COUPLINGS ABS - DWV COUPLINGS ABS - DWV COUPLINGS
HDPE-S&D ELBOWS HDPE-S&D ELBOWS ABS - DWV CAPS
ABS - DWV CAPS ABS - DWV CAPS HDPE-S&D TEES & WYES
HDPE-S&D TEES & WYES ABS - DWV ADAPTERS ABS - DWV ADAPTERS
ABS - DWV ADAPTERS ABS - DWV BUSHINGS ABS - DWV BUSHINGS
ABS - DWV BUSHINGS ABS - DWV ELBOWS ABS - DWV ELBOWS
ABS - DWV ELBOWS ABS - DWV TEES & WYES ABS - DWV TEES & WYES
ABS - DWV TEES & WYES ABS - DWV CLEANOUTS & PLUGS ABS - DWV CLEANOUTS & PLUGS
ABS - DWV CLEANOUTS & PLUGS ABS - DWV TRAPS & VENTS ABS - DWV TRAPS & VENTS
ABS - DWV TRAPS & VENTS ABS - DWV BACKWATER VALVE ABS - DWV BACKWATER VALVE
ABS - DWV BACKWATER VALVE
Sort By:
1
Pro-Flex PFIM-0001 Pro-Flex Installation/Training Guide Pro-Flex PFSP-0302 Pro-Flex Striker Plate Genova Products 41840 Styrene Sewer and Drain Fittings
All installers must purchase and read the Installation/ Training Guide and return the qualified installer card on the back cover to Pro-Flex, LLC. All installations must be performed by a qualified person recognized by the local jurisdiction as capable of performing such work. Protective devices required where tubing passes through structural members. Used to form a removable closure for sewer lines, septic tank and seepage systems. Teflon thread tape is recommended for threaded joints. Conforms to ASTM D2852.
Pro-Flex Floppy-Flex Protective Conduit Genova 400 Pipe Plug Genova 400 Sanitary Street Pipe Elbow
12" long floppy-flex galvanized protective conduits for CSST tubing. Used to form a removable closure for sewer lines, septic tank and seepage systems. Teflon thread tape is recommended for threaded joints. Conforms to ASTM D2852. Used to change direction in piping for sewer lines, septic tank and seepage systems. Sometimes called an street eighth bend. Conforms to ASTM D2852.
Genova 400 Short Turn Pipe Elbow Pro-Flex PFSP-0307 Pro-Flex Striker Plate Pro-Flex Floppy-Flex Protective Conduit
Used to change direction in piping. Sometimes called a "short turn quarter bend." Meets ASTM D2852. Protective devices required where tubing passes through structural members. 12" long floppy-flex galvanized protective conduits for CSST tubing.
Hancor 36-1083TW Hdpe Sewer And Drain Fitting NDS 107 Standard Round Valve Box With Overlapping ICV Cover Pro-Flex PFAP-1210 Pro-Flex Accessory Pack
Triple-Wall Pipe Tee-Wye, Series: 3000, 4 in Nominal Size, HDPE, ASTM D3350, For Residential Drainage, Sump Pump Outlet, Curtain Drains, Retaining Walls, Irrigation, Downspout Runoff, Foundation/Footer Drainage, Septic Leach Fields, Agricultural drain Outlets, Parks and Golf Courses Durable plastic construction with snap-in green plastic lid. No. RVB-1 - Top 7", Bottom 8". No. RVB-2 - Top 10", Bottom 13-1/8". CSA approved. Includes: 4 retainer rings,  2 each - slide rings, silicone O-rings, high temperature sealing gaskets. Replacement parts for lost or broken components.
Pro-Flex PFBC-AB Pro-Flex Bonding Clamps Pro-Flex PFAP-3410 Pro-Flex Accessory Pack Pro-Flex PFMF-1212 Tube To Pipe Adapter
UL467 bronze bonding clamp. Bonding of the gas system is required with all installations of Pro-Flex CSST. Includes: 4 retainer rings,  2 each - slide rings, silicone O-rings, high temperature sealing gaskets. Replacement parts for lost or broken components. Includes all components (Retainer Ring, Slide Ring, O-ring, and High Temperature Gasket) required to assemble to Pro-Flex tubing.
Pro-Flex PFFN-1212 Tube To Pipe Adapter Pro-Flex PFMF-3406 Tube To Pipe Adapter NDS 111BC Standard Round Valve Box With Overlapping ICV Cover
Includes all components (Retainer Ring, Slide Ring, O-ring, and High Temperature Gasket) required to assemble to Pro-Flex tubing. Includes all components (Retainer Ring, Slide Ring, O-ring, and High Temperature Gasket) required to assemble to Pro-Flex tubing. Durable plastic construction with snap-in green plastic lid. No. RVB-1 - Top 7", Bottom 8". No. RVB-2 - Top 10", Bottom 13-1/8". CSA approved.
Pro-Flex PFFN-3406 Tube To Pipe Adapter Pro-Flex PFBC-CDEA Pro-Flex Bonding Clamps Pro-Flex PFST-12 Pro-Flex Termination Plates
Includes all components (Retainer Ring, Slide Ring, O-ring, and High Temperature Gasket) required to assemble to Pro-Flex tubing. UL467 bronze bonding clamp. Bonding of the gas system is required with all installations of Pro-Flex CSST. Includes attached fitting complete with all components (Retainer Ring, Slide Ring, O-ring, and High Temperature Gasket) required to assemble to Pro-Flex tubing.
NDS Standard Rectangular Valve Box With Overlapping ICV Cover Pro-Flex PFTE-BBB6 Tube Tee Pro-Flex PFMN-CCB 4-Port Pipe Manifold
ICV valve box with overlapping cover, Black/Green.14 In. x 19 In. Includes all components (Retainer Ring, Slide Ring, O-ring, and High Temperature Gasket) required to assemble each branch to Pro-Flex tubing. Each manifold has 4 1/2" female (FIP) branches.
Pro-Flex PFMN-BBB 4-Port Pipe Manifold Pro-Flex PFST-34 Pro-Flex Termination Plates Pro-Flex PFTE-CCB6 Tube Tee
Each manifold has 4 1/2" female (FIP) branches. Includes attached fitting complete with all components (Retainer Ring, Slide Ring, O-ring, and High Temperature Gasket) required to assemble to Pro-Flex tubing. Includes all components (Retainer Ring, Slide Ring, O-ring, and High Temperature Gasket) required to assemble each branch to Pro-Flex tubing.
Pro-Flex PFCT-1225 Pro-Flex Pro-Flex PFCT-3425 Pro-Flex Pro-Flex PFSAGK-2000 Pro-Flex Gas Appliance Kit
Flexible 304 stainless steel with yellow polyethylene jacketing. All tubing clearly marked with gas pressure rating, EHD (Equivalent Hydraulic Diameter). Tested to the ANSI Standards for Fuel Gas Piping System using Corrugated Stainless Steel Tubing(CSST), ANSI LC-1a-2009, CSA 6.26a-2009, ANSI LC-1-2005 and CSA 6.26-2005. Flexible 304 stainless steel with yellow polyethylene jacketing. All tubing clearly marked with gas pressure rating, EHD (Equivalent Hydraulic Diameter). Tested to the ANSI Standards for Fuel Gas Piping System using Corrugated Stainless Steel Tubing(CSST), ANSI LC-1a-2009, CSA 6.26a-2009, ANSI LC-1-2005 and CSA 6.26-2005. Includes: 25 ft. 1/2"  CSST flexible gas piping, one 1/2"  brass male fitting, one 1/2" special termination plate with male fittings, 1/2" MIP x 1/2" FIP ball valve connector - 24" long, 1/2" flare x 3/8" MIP union fitting, spool of yellow teflon tape, bottle leak detector, bonding clamp, installation/training guide and fitting assembly sheet.
Pro-Flex PFCT-1275 Pro-Flex Pro-Flex PFCT-3475 Pro-Flex Pro-Flex PFCT-12225 Pro-Flex
Flexible 304 stainless steel with yellow polyethylene jacketing. All tubing clearly marked with gas pressure rating, EHD (Equivalent Hydraulic Diameter). Tested to the ANSI Standards for Fuel Gas Piping System using Corrugated Stainless Steel Tubing(CSST), ANSI LC-1a-2009, CSA 6.26a-2009, ANSI LC-1-2005 and CSA 6.26-2005. Flexible 304 stainless steel with yellow polyethylene jacketing. All tubing clearly marked with gas pressure rating, EHD (Equivalent Hydraulic Diameter). Tested to the ANSI Standards for Fuel Gas Piping System using Corrugated Stainless Steel Tubing(CSST), ANSI LC-1a-2009, CSA 6.26a-2009, ANSI LC-1-2005 and CSA 6.26-2005. Flexible 304 stainless steel with yellow polyethylene jacketing. All tubing clearly marked with gas pressure rating, EHD (Equivalent Hydraulic Diameter). Tested to the ANSI Standards for Fuel Gas Piping System using Corrugated Stainless Steel Tubing(CSST), ANSI LC-1a-2009, CSA 6.26a-2009, ANSI LC-1-2005 and CSA 6.26-2005.
Pro-Flex PFCT-34225 Pro-Flex
Flexible 304 stainless steel with yellow polyethylene jacketing. All tubing clearly marked with gas pressure rating, EHD (Equivalent Hydraulic Diameter). Tested to the ANSI Standards for Fuel Gas Piping System using Corrugated Stainless Steel Tubing(CSST), ANSI LC-1a-2009, CSA 6.26a-2009, ANSI LC-1-2005 and CSA 6.26-2005.
   
 
1