Home > PLUMBING > ROUGH PLUMBING SUPPLIES > VALVES > FOOT VALVES
Sort By:
1
Plumb Pak PP10-8SN Coin Air Valve BREAKER VACUUM BRASS 3/4INCH  KBI DF-0750-T Chemical Resistant Drum Faucet
Valve is operate by a coin or screwdriver. SharkBite Vacuum Breaker, 3/4 in, Female x Male End Connection, Brass Body, 180 Deg F, Use On Homes, Schools, Laboratories or Any Commercial Building 3/4"MPT polyethylene drum faucet. Low friction bearing surface allows for easy open and close. Bulk.
B&K 108-904RP Backflow Preventer Vacuum Breaker Hancor 0499TW Hdpe Sewer And Drain Fitting Genova 400 Sewer and Drain Bull Nose Tee
Fits any 3/4'' hose thread outlet. Prevents back siphoning of contaminated water, protection for portable hoses connected to hose thread faucets. Break-off attachment screw for permanent installation with no plumbing changes. Hose threads comply with ANSI B1.20.7; ASSE 1019 approved, UPC, Canadian UPC approved. CSA approved. Used primarily in seepage bed piping grids in conjunction with perforated pipe. Used where flow characteristics are not a primary consideration. Meets ASTM D3034.
Genova 400 Sewer and Drain Sanitary Tee B&K 108-904 Silcock Vacuum Breaker Plumb Pak PP827-9 Loose Key Air Valve
Used to connect vertical branch line into straight sewer line. Also, used with cleanout to provide access to piping. 3" meets ASTM D2949 or exceeds ASTM D2729; 4" and 6" meet  ASTM D3034. Fits any 3/4'' hose thread outlet. Prevents back siphoning of contaminated water, protection for portable hoses connected to hose thread faucets. Break-off attachment screw for permanent installation with no plumbing changes. Hose threads comply with ANSI B1.20.7; ASSE 1019 approved, UPC, Canadian UPC approved. 1/8 x 27 NPT. Fits most steam radiators. Includes one vent and one key. Chrome plated.
Genova 400 Sewer and Drain Sanitary Tee Genova 400 Solvent Weld Sewer and Drain Pipe Wye Genova 400 Solvent Weld Sewer and Drain Pipe Wye
Used to connect vertical branch line into straight sewer line. Also, used with cleanout to provide access to piping. 3" meets ASTM D2949 or exceeds ASTM D2729; 4" and 6" meet  ASTM D3034. Used to connect horizontal branch line into straight sewer line. Also, used with cleanout to provide access to piping. 3" meets ASTM D2949 or exceeds ASTM D2729; 4" and 6" meet ASTM D3034. Used to connect horizontal branch line into straight sewer line. Also, used with cleanout to provide access to piping. 3" meets ASTM D2949 or exceeds ASTM D2729; 4" and 6" meet ASTM D3034.
B&K 109-204 Self-Closing Drum and Barrel Faucet Arrowhead Brass PK1430 Air Vent Assembly Kit B & K ProLine Foot Valve
Zamac construction. Convenient holes to lock handle closed position. For use with all petroleum products, except trichlorethylene. Not for use with detergents or water. 3/4" male pipe thread inlet. Threaded inlets comply with ANSI B1.20.01. Includes vacuum breaker cap, underbody, o-ring, and plunger. Air vent assembly for Arrowhead frost free hydrants, 420 & 455BFP series. Spring-loaded poppet, O-ring seal, threaded ends comply to ANSI B1.20.1.
FV441 4-In-1 Foot Valve Genova 400 Pipe Reducing Bushing Brass Craft CSSD54-24P Procoat
Nylon Body. Corrosion resistant parts. Fits four pipe sizes, 3/4", 1", 1-1/4" and 1-1/2". Inserts into fitting hub to reduce to smaller pipe size. Meets ASTM D3034. Uniform baked-on polymer coating leaves no gaps to resist corrosion and chemicals and protect against leaks. Manufactured without soldered or brazed joints form type 304 stainless steel. Broader face nuts and fittings with smoother connector ends seal with less torque for easy installation. 3/8'' ID (1/2'' OD) with fittings. CSA IAS design certified for gas appliances indoor and outdoor.
Brass Craft CSSL54-36P Procoat Gas Dryer Connectors Brass Craft CSSL54-24P Procoat Gas Dryer Connectors B & K ProLine Foot Valve
Manufactured without soldered or brazed joints from type 304 stainless steel. Broader face nuts and fittings with smoother connector ends seal with less torque for easy installation. Uniform coating leaves no gaps and protects against corrosion and leaks.  1/4" ID 3/8" OD tube with fittings. Manufactured without soldered or brazed joints from type 304 stainless steel. Broader face nuts and fittings with smoother connector ends seal with less torque for easy installation. Uniform coating leaves no gaps and protects against corrosion and leaks.  1/4" ID 3/8" OD tube with fittings. Spring-loaded poppet, O-ring seal, threaded ends comply to ANSI B1.20.1.
Genova 400 Sewer and Drain Bull Nose Tee Brass Craft CSSD54-48P Procoat SHOCK ABSORBR SUPPLY MIP 1/2IN
Used primarily in seepage bed piping grids in conjunction with perforated pipe. Used where flow characteristics are not a primary consideration. Meets ASTM D3034. Uniform baked-on polymer coating leaves no gaps to resist corrosion and chemicals and protect against leaks. Manufactured without soldered or brazed joints form type 304 stainless steel. Broader face nuts and fittings with smoother connector ends seal with less torque for easy installation. 3/8'' ID (1/2'' OD) with fittings. CSA IAS design certified for gas appliances indoor and outdoor. Oatey quiet pipes water hammer absorbers are designed to reduce water pipe banging noise caused by quick-closing valves and protect plumbing appliances and fixtures from the effects of water hammer.  Quiet pipes absorbers contain a piston that uses a triple O-ring to maintain 60 psi charge in the tube. When the water valve is shutoff, it sends a shock through the system and the piston compresses.  This absorbs a shock that would normally rattle and shake the pipe.
B and K Industries G014YE101136RP Gas Connectors Brass Craft CSSL54-48P Procoat Brass Craft CSSC22-36P Procoat
CSA certified up to .05 PSIG, -40 to 150 degrees operating temperature. Manufactured without soldered or brazed joints from type 304 stainless steel. Broader face nuts and fittings with smoother connector ends seal with less torque for easy installation. Uniform coating leaves no gaps and protects against corrosion and leaks.  1/4" ID 3/8" OD tube with fittings. Manufactured without soldered or brazed joints from type 304 stainless steel. Broader face nuts and fittings with smoother connector ends seal with less torque for easy installation. Uniform coating leaves no gaps and protects against corrosion and leaks.  1/2" ID (5/8" OD) tube with fittings.
Brass Craft CSSD54-36P Procoat Brass Craft CSSC21-36P Procoat Gas Range Connectors Brass Craft CSSC21-48P Procoat Gas Range Connectors
Uniform baked-on polymer coating leaves no gaps to resist corrosion and chemicals and protect against leaks. Manufactured without soldered or brazed joints form type 304 stainless steel. Broader face nuts and fittings with smoother connector ends seal with less torque for easy installation. 3/8'' ID (1/2'' OD) with fittings. CSA IAS design certified for gas appliances indoor and outdoor. Manufactured without soldered or brazed joints from type 304 stainless steel. Broader face nuts and fittings with smoother connector ends seal with less torque for easy installation. Uniform coating leaves no gaps and protects against corrosion and leaks.  1/2" I.D. (5/8" O.D.) tube with fittings. Manufactured without soldered or brazed joints from type 304 stainless steel. Broader face nuts and fittings with smoother connector ends seal with less torque for easy installation. Uniform coating leaves no gaps and protects against corrosion and leaks.  1/2" I.D. (5/8" O.D.) tube with fittings.
TEE PVC BULL NOSE 6IN         Brass Craft CSSC54-36P Procoat Gas Range Connectors Brass Craft CSSC22-48P Procoat
TEE PVC BULL NOSE 6IN
Our Price: $19.09
Used primarily in seepage bed piping grids in conjunction with perforated pipe. Used where flow characteristics are not a primary consideration. Meets ASTM D3034. Manufactured without soldered or brazed joints from type 304 stainless steel. Broader face nuts and fittings with smoother connector ends seal with less torque for easy installation. Uniform coating leaves no gaps and protects against corrosion and leaks.  1/2" I.D. (5/8" O.D.) tube with fittings. Manufactured without soldered or brazed joints from type 304 stainless steel. Broader face nuts and fittings with smoother connector ends seal with less torque for easy installation. Uniform coating leaves no gaps and protects against corrosion and leaks.  1/2" ID (5/8" OD) tube with fittings.
B and K Industries G014YE101148RP Gas Connectors Brass Craft CSSC54-48P Procoat Brass Craft CSSL115E-36P Gas Appliance Connector
CSA certified up to .05 PSIG, -40 to 150 degrees operating temperature. Manufactured without soldered or brazed joints from type 304 stainless steel. Broader face nuts and fittings with smoother connector ends seal with less torque for easy installation. Uniform coating leaves no gaps and protects against corrosion and leaks.  1/2" I.D. (5/8" O.D.) tube with fittings. Coated stainless steel gas connector with excess flow valve. The Safety+Plus flow valve is an automatic safety valve for gas designed to help prevent fires and explosions due to gas line ruptures or disconnects at the appliance. It is equipped with automatic reset and automatic valve activation. The ProCoat polymer-based coating resists corrosion from harsh chemicals found in common household cleaning, plumbing repair, and masonry products. Approved for indoor and outdoor use, the ProCoat coating resists the harsh effects of the UV rays and salt. For use with residential and commercial gas appliances not subject to frequent movement that utilize natural, manufactured, mixed, liquefied-petroleum gases and LP gas-air mixtures: residential kitchen appliances, infrared or blue-flame "hearth-style" heating units, pulse combustion furnaces, manufactured housing (permanent residence mobile homes), laundry/utility appliances, forced air heating units, and rooftop HVAC units. Design-certified (assembled connector) and manufactured in accordance with ANSI Z21.24, ANSI Z21.75, AGAL Contract No. 8204, listed by the New York City Board of Standards and Appeals and by the Commonwealth of Massachusetts Division of Registration. Leak tested.
B & K ProLine Foot Valve Anderson Metals 59540-0612 Oil Drum and Tank Valve Arrowhead PK1390 Replacement Self-Draining Vacuum Breaker
Spring-loaded poppet, O-ring seal, threaded ends comply to ANSI B1.20.1. 3/4" mip x 3/8" flare. Replacement self-draining vacuum breaker for Arrowhead frost free hydrant. Fits all models with BFPSD after part number (backflow preventer, self draining) and 485BFP and 486BFP models. Nickel plated.
Brass Craft CSSD105E-36P Gas Appliance Connector Brass Craft CSSC91E-48P Gas Appliance Connectors Brass Craft CSSD54-60P Procoat
Coated stainless steel gas connector with excess flow valve. The Safety+Plus flow valve is an automatic safety valve for gas designed to help prevent fires and explosions due to gas line ruptures or disconnects at the appliance. It is equipped with automatic reset and automatic valve activation. The ProCoat polymer-based coating resists corrosion from harsh chemicals found in common household cleaning, plumbing repair, and masonry products. Approved for indoor and outdoor use, the ProCoat coating resists the harsh effects of the UV rays and salt. For use with residential and commercial gas appliances not subject to frequent movement that utilize natural, manufactured, mixed, liquefied-petroleum gases and LP gas-air mixtures: residential kitchen appliances, infrared or blue-flame "hearth-style" heating units, pulse combustion furnaces, manufactured housing (permanent residence mobile homes), laundry/utility appliances, forced air heating units, and rooftop HVAC units. Design-certified (assembled connector) and manufactured in accordance with ANSI Z21.24, ANSI Z21.75, AGAL Contract No. 8204, listed by the New York City Board of Standards and Appeals and by the Commonwealth of Massachusetts Division of Registration. Leak tested. Coated stainless steel gas connector with excess flow valve. The Safety+Plus flow valve is an automatic safety valve for gas designed to help prevent fires and explosions due to gas line ruptures or disconnects at the appliance. It is equipped with automatic reset and automatic valve activation. The ProCoat polymer-based coating resists corrosion from harsh chemicals found in common household cleaning, plumbing repair, and masonry products. Approved for indoor and outdoor use, the ProCoat coating resists the harsh effects of the UV rays and salt. For use with residential and commercial gas appliances not subject to frequent movement that utilize natural, manufactured, mixed, liquefied-petroleum gases and LP gas-air mixtures: residential kitchen appliances, infrared or blue-flame "hearth-style" heating units, pulse combustion furnaces, manufactured housing (permanent residence mobile homes), laundry/utility appliances, forced air heating units, and rooftop HVAC units. Design-certified (assembled connector) and manufactured in accordance with ANSI Z21.24, ANSI Z21.75, AGAL Contract No. 8204, listed by the New York City Board of Standards and Appeals and by the Commonwealth of Massachusetts Division of Registration. Leak tested. Uniform baked-on polymer coating leaves no gaps to resist corrosion and chemicals and protect against leaks. Manufactured without soldered or brazed joints form type 304 stainless steel. Broader face nuts and fittings with smoother connector ends seal with less torque for easy installation. 3/8'' ID (1/2'' OD) with fittings. CSA IAS design certified for gas appliances indoor and outdoor.
Brass Craft CSSD105E-48P Gas Appliance Connectors Genova 400 Solvent Weld Sewer and Drain Pipe Wye Brass Craft CSSC91E-48P Gas Appliance Connectors
Coated stainless steel gas connector with excess flow valve. The Safety+Plus flow valve is an automatic safety valve for gas designed to help prevent fires and explosions due to gas line ruptures or disconnects at the appliance. It is equipped with automatic reset and automatic valve activation. The ProCoat polymer-based coating resists corrosion from harsh chemicals found in common household cleaning, plumbing repair, and masonry products. Approved for indoor and outdoor use, the ProCoat coating resists the harsh effects of the UV rays and salt. For use with residential and commercial gas appliances not subject to frequent movement that utilize natural, manufactured, mixed, liquefied-petroleum gases and LP gas-air mixtures: residential kitchen appliances, infrared or blue-flame "hearth-style" heating units, pulse combustion furnaces, manufactured housing (permanent residence mobile homes), laundry/utility appliances, forced air heating units, and rooftop HVAC units. Design-certified (assembled connector) and manufactured in accordance with ANSI Z21.24, ANSI Z21.75, AGAL Contract No. 8204, listed by the New York City Board of Standards and Appeals and by the Commonwealth of Massachusetts Division of Registration. Leak tested. Used to connect horizontal branch line into straight sewer line. Also, used with cleanout to provide access to piping. 3" meets ASTM D2949 or exceeds ASTM D2729; 4" and 6" meet ASTM D3034. Coated stainless steel gas connector with excess flow valve. The Safety+Plus flow valve is an automatic safety valve for gas designed to help prevent fires and explosions due to gas line ruptures or disconnects at the appliance. It is equipped with automatic reset and automatic valve activation. The ProCoat polymer-based coating resists corrosion from harsh chemicals found in common household cleaning, plumbing repair, and masonry products. Approved for indoor and outdoor use, the ProCoat coating resists the harsh effects of the UV rays and salt. For use with residential and commercial gas appliances not subject to frequent movement that utilize natural, manufactured, mixed, liquefied-petroleum gases and LP gas-air mixtures: residential kitchen appliances, infrared or blue-flame "hearth-style" heating units, pulse combustion furnaces, manufactured housing (permanent residence mobile homes), laundry/utility appliances, forced air heating units, and rooftop HVAC units. Design-certified (assembled connector) and manufactured in accordance with ANSI Z21.24, ANSI Z21.75, AGAL Contract No. 8204, listed by the New York City Board of Standards and Appeals and by the Commonwealth of Massachusetts Division of Registration. Leak tested.
Genova 400 Solvent Weld Sewer and Drain Pipe Wye B&K 109-224 Drum and Barrel Faucet Simmons 400SB Foot Valve
Used to connect horizontal branch line into straight sewer line. Also, used with cleanout to provide access to piping. 3" meets ASTM D2949 or exceeds ASTM D2729; 4" and 6" meet ASTM D3034. Heavy bronze construction. Quarter turn operation. Lockable handle. Pipe threads comply with ANSI B1.20.1. Hose threads comply with ANSI B1.20.7. Silicon bronze cast body and poppet contain less than 0.05% Lead. Furnished with Buna-N o-ring, stainless steel perforated strainer, spring and locknut. No.404SB enters 2" pipe. 400 PSI working pressure.
Simmons 400SB Foot Valve Simmons 400SB Dual Purpose Threaded Foot Valve Simmons 400SB Dual Purpose Threaded Foot Valve
Silicon bronze cast body and poppet contain less than 0.05% Lead. Furnished with Buna-N o-ring, stainless steel perforated strainer, spring and locknut. No.404SB enters 2" pipe. 400 PSI working pressure. Silicon bronze cast body and poppet. Stainless steel perforated strainer. Silicon bronze cast body and poppet. Stainless steel perforated strainer.
Genova 400 Sewer and Drain Sanitary Tee Simmons 400SB Foot Valve Simmons 400SB Dual Purpose Threaded Foot Valve
Used to connect vertical branch line into straight sewer line. Also, used with cleanout to provide access to piping. 3" meets ASTM D2949 or exceeds ASTM D2729; 4" and 6" meet  ASTM D3034. Silicon bronze cast body and poppet contain less than 0.05% Lead. Furnished with Buna-N o-ring, stainless steel perforated strainer, spring and locknut. No.404SB enters 2" pipe. 400 PSI working pressure. Silicon bronze cast body and poppet. Stainless steel perforated strainer.
Simmons 400SB Foot Valve
Silicon bronze cast body and poppet contain less than 0.05% Lead. Furnished with Buna-N o-ring, stainless steel perforated strainer, spring and locknut. No.404SB enters 2" pipe. 400 PSI working pressure.
   
 
1