Home > PLUMBING > ROUGH PLUMBING SUPPLIES > VALVES > GATE VALVES
Choose a sub category:
STYRENE-S&D CAPS STYRENE-S&D CAPS STYRENE-S&D CAPS
STYRENE-S&D ADAPTERS STYRENE-S&D ADAPTERS STYRENE-S&D ADAPTERS
STYRENE-S&D ELBOWS STYRENE-S&D ELBOWS STYRENE-S&D ELBOWS
STYRENE-S&D TEES & WYES STYRENE-S&D TEES & WYES STYRENE-S&D TEES & WYES
STYRENE-S&D CLEANOUTS & PLUGS STYRENE-S&D CLEANOUTS & PLUGS STYRENE-S&D CLEANOUTS & PLUGS
STYRENE-S&D STRAINERS STYRENE-S&D STRAINERS STYRENE-S&D STRAINERS
Sort By:
1
World Wide Sourcing PMB-042 Sillcock Handle Danco 80416 Square Broach Valve Wheel Handle Danco 80417 Round Broach Valve Wheel Handle
WORLDWIDE SOURCING Sillcock Wheel Handle, Suitable For Use With: 13/32 in Round 12 Point Stem, Zinc, 1-3/4 in Dia Danco Valve Wheel Handle, Square Broach, Suitable For Use With: Hose Bibb Faucets, Sillcocks, Stopcocks and Valves, Metal, Stainless Steel Danco Valve Wheel Handle, Round Broach, Suitable For Use With: Hose Bibb Faucets, Sillcocks, Stopcocks and Valves, Metal, Stainless Steel
Genova 400 Sewer and Drain Pipe Cap Plumb Pak PP28601 Square Stem Wheel Sillcock Faucet Handle World Wide Sourcing PMB-441 Hose Bibb Handle
Used to permanently or temporarily cap pipe for sewer lines, septic tank and seepage systems. Meets ASTM D3034. Plumb Pak Sillcock Faucet Handle, Square Stem, Wheel, 1-3/4 in Width WORLDWIDE SOURCING Hose Bibb Handle, For T-Handle Lawn Faucet
Plumb Pak PP806-1 Sillcock Faucet Wheel Handle Plumb Pak PP806-11 Sillcock Faucet Handle Plumb Pak PP10-8SN Coin Air Valve
Plumb Pak Sillcock Faucet Wheel Handle, Suitable For Use With: 1/4 in Square Stems 12 point Valve is operate by a coin or screwdriver.
Plumb Pak PP806-10 Sillcock Faucet Handle KBI DF-0750-T Chemical Resistant Drum Faucet BREAKER VACUUM BRASS 3/4INCH
16 point 3/4"MPT polyethylene drum faucet. Low friction bearing surface allows for easy open and close. Bulk. SharkBite Vacuum Breaker, 3/4 in, Female x Male End Connection, Brass Body, 180 Deg F, Use On Homes, Schools, Laboratories or Any Commercial Building
B&K 108-904RP Backflow Preventer Vacuum Breaker Hancor 0499TW Hdpe Sewer And Drain Fitting Plumb Pak PP806-15 Tee Valve Faucet Handle
Fits any 3/4'' hose thread outlet. Prevents back siphoning of contaminated water, protection for portable hoses connected to hose thread faucets. Break-off attachment screw for permanent installation with no plumbing changes. Hose threads comply with ANSI B1.20.7; ASSE 1019 approved, UPC, Canadian UPC approved. CSA approved. Plumb Pak Tee Valve Faucet Handle, Suitable For Use With: Lawn Faucet or Valves, 12/16 Point
Arrowhead PK1250 Sillcock Wheel Handle NDS 107 Standard Round Valve Box With Overlapping ICV Cover Arrowhead PK1290 Oval Sillcock Wheel Handle
Green wheel handle and stainless steel screw. Fits all models. Durable plastic construction with snap-in green plastic lid. No. RVB-1 - Top 7", Bottom 8". No. RVB-2 - Top 10", Bottom 13-1/8". CSA approved. Green wheel handle and stainless steel screw. Fits all models.
B&K 108-904 Silcock Vacuum Breaker Plumb Pak PP827-9 Loose Key Air Valve Danco 10006 Faucet Handle with Adapter
Fits any 3/4'' hose thread outlet. Prevents back siphoning of contaminated water, protection for portable hoses connected to hose thread faucets. Break-off attachment screw for permanent installation with no plumbing changes. Hose threads comply with ANSI B1.20.7; ASSE 1019 approved, UPC, Canadian UPC approved. 1/8 x 27 NPT. Fits most steam radiators. Includes one vent and one key. Chrome plated. Fits all outdoor faucets. Larger, ergonomic handle is easier to turn on/off. Durable construction (heavier gauge zinc). Includes universal adapter and screws.
Mueller ProLine Compact Pattern Standard Port Gate Valve Genova 69230 Dwv Floor Strainer Mueller ProLine Compact Pattern Standard Port Gate Valve
Standard port, non-rising stem, six-point cast-iron handle, brass wedge disk, solder ends comply with ANSI B16.18, certified to NSF 61. Prevents debris from entering a drain opening on the floor. Fits flush into any fitting hub. Standard port, non-rising stem, six-point cast-iron handle, brass wedge disk, threaded ends comply with ANSI B1.20.1, certified to NSF 61.
B&K 109-204 Self-Closing Drum and Barrel Faucet Mueller ProLine Full Port Gate Valve Arrowhead Brass PK1430 Air Vent Assembly Kit
Zamac construction. Convenient holes to lock handle closed position. For use with all petroleum products, except trichlorethylene. Not for use with detergents or water. 3/4" male pipe thread inlet. Threaded inlets comply with ANSI B1.20.01. Full port, non-rising stem, six-point cast-iron handle, brass wedge disk, threaded ends comply with ANSI B1.20.1, certified to NSF 61. Includes vacuum breaker cap, underbody, o-ring, and plunger. Air vent assembly for Arrowhead frost free hydrants, 420 & 455BFP series.
Mueller ProLine Compact Pattern Standard Port Gate Valve Mueller ProLine Compact Pattern Standard Port Gate Valve Genova 400 Sewer and Drain Pipe Cap
Standard port, non-rising stem, six-point cast-iron handle, brass wedge disk, threaded ends comply with ANSI B1.20.1, certified to NSF 61. Standard port, non-rising stem, six-point cast-iron handle, brass wedge disk, solder ends comply with ANSI B16.18, certified to NSF 61. Used to permanently or temporarily cap pipe for sewer lines, septic tank and seepage systems. Meets ASTM D3034.
Mueller ProLine Full Port Gate Valve NDS ProGuard Gate Valve NDS ProGuard Gate Valve
Full port, non-rising stem, screw over bonnet, five-point cast-iron handle, solid wedge disk, meets MSS SP-80, type1, class 150 lb. specification, solder ends comply with ANSI B16.18, certified to NSF 61-G. PVC construction. Gray color body with red handle. EPDM O-rings. Complies with all applicable ASTM and ANSI standards. PVC construction. Gray color body with red handle. EPDM O-rings. Complies with all applicable ASTM and ANSI standards.
NDS ProGuard Gate Valve NDS ProGuard Gate Valve Mueller ProLine Full Port Gate Valve
PVC construction. Gray color body with red handle. EPDM O-rings. Complies with all applicable ASTM and ANSI standards. PVC construction. Gray color body with red handle. EPDM O-rings. Complies with all applicable ASTM and ANSI standards. Full port, non-rising stem, screw over bonnet, five-point cast-iron handle, solid wedge disk, meets MSS SP-80, type 1, class 150 lb. specifications, threaded ends comply with ANSI B1.20.1, certified to NSF 61.
Mueller ProLine Compact Pattern Standard Port Gate Valve NDS 111BC Standard Round Valve Box With Overlapping ICV Cover Genova 400 Pipe Reducing Bushing
Standard port, non-rising stem, six-point cast-iron handle, brass wedge disk, threaded ends comply with ANSI B1.20.1, certified to NSF 61. Durable plastic construction with snap-in green plastic lid. No. RVB-1 - Top 7", Bottom 8". No. RVB-2 - Top 10", Bottom 13-1/8". CSA approved. Inserts into fitting hub to reduce to smaller pipe size. Meets ASTM D3034.
Mueller ProLine Standard Port Gate Valve Mueller ProLine Full Port Gate Valve NDS ProGuard Gate Valve
Non-rising stem, six-point cast-iron handle, compression ends for solderless connection to copper tubing, certified to NSF 61. Full port, non-rising stem, screw over bonnet, five-point cast-iron handle, solid wedge disk, meets MSS SP-80, type1, class 150 lb. specification, solder ends comply with ANSI B16.18, certified to NSF 61-G. PVC construction. Gray color body with red handle. EPDM O-rings. Complies with all applicable ASTM and ANSI standards.
NDS ProGuard Gate Valve Mueller ProLine Full Port Gate Valve SHOCK ABSORBR SUPPLY MIP 1/2IN
PVC construction. Gray color body with red handle. EPDM O-rings. Complies with all applicable ASTM and ANSI standards. Full port, non-rising stem, screw over bonnet, five-point cast-iron handle, solid wedge disk, meets MSS SP-80, type 1, class 150 lb. specifications, threaded ends comply with ANSI B1.20.1, certified to NSF 61. Oatey quiet pipes water hammer absorbers are designed to reduce water pipe banging noise caused by quick-closing valves and protect plumbing appliances and fixtures from the effects of water hammer.  Quiet pipes absorbers contain a piston that uses a triple O-ring to maintain 60 psi charge in the tube. When the water valve is shutoff, it sends a shock through the system and the piston compresses.  This absorbs a shock that would normally rattle and shake the pipe.
Mueller ProLine Compact Pattern Standard Port Gate Valve NDS ProGuard Gate Valve NDS ProGuard Gate Valve
Standard port, non-rising stem, six-point cast-iron handle, brass wedge disk, threaded ends comply with ANSI B1.20.1, certified to NSF 61. PVC construction. Gray color body with red handle. EPDM O-rings. Complies with all applicable ASTM and ANSI standards. PVC construction. Gray color body with red handle. EPDM O-rings. Complies with all applicable ASTM and ANSI standards.
NDS Standard Rectangular Valve Box With Overlapping ICV Cover Anderson Metals 59540-0612 Oil Drum and Tank Valve Arrowhead PK1390 Replacement Self-Draining Vacuum Breaker
ICV valve box with overlapping cover, Black/Green.14 In. x 19 In. 3/4" mip x 3/8" flare. Replacement self-draining vacuum breaker for Arrowhead frost free hydrant. Fits all models with BFPSD after part number (backflow preventer, self draining) and 485BFP and 486BFP models. Nickel plated.
Mueller ProLine Standard Port Gate Valve Mueller ProLine Compact Pattern Standard Port Gate Valve Mueller ProLine Full Port Gate Valve
Non-rising stem, six-point cast-iron handle, compression ends for solderless connection to copper tubing, certified to NSF 61. Standard port, non-rising stem, six-point cast-iron handle, brass wedge disk, threaded ends comply with ANSI B1.20.1, certified to NSF 61. Full port, non-rising stem, screw over bonnet, five-point cast-iron handle, solid wedge disk, meets MSS SP-80, type 1, class 150 lb. specifications, threaded ends comply with ANSI B1.20.1, certified to NSF 61.
NDS ProGuard Gate Valve NDS ProGuard Gate Valve B&K 109-224 Drum and Barrel Faucet
PVC construction. Gray color body with red handle. EPDM O-rings. Complies with all applicable ASTM and ANSI standards. PVC construction. Gray color body with red handle. EPDM O-rings. Complies with all applicable ASTM and ANSI standards. Heavy bronze construction. Quarter turn operation. Lockable handle. Pipe threads comply with ANSI B1.20.1. Hose threads comply with ANSI B1.20.7.
Mueller ProLine Full Port Gate Valve Mueller ProLine Compact Pattern Standard Port Gate Valve NDS ProGuard Gate Valve
Full port, non-rising stem, screw over bonnet, five-point cast-iron handle, solid wedge disk, meets MSS SP-80, type 1, class 150 lb. specifications, threaded ends comply with ANSI B1.20.1, certified to NSF 61. Standard port, non-rising stem, six-point cast-iron handle, brass wedge disk, threaded ends comply with ANSI B1.20.1, certified to NSF 61. PVC construction. Gray color body with red handle. EPDM O-rings. Complies with all applicable ASTM and ANSI standards.
NDS ProGuard Gate Valve Mueller ProLine Full Port Gate Valve
PVC construction. Gray color body with red handle. EPDM O-rings. Complies with all applicable ASTM and ANSI standards. Full port, non-rising stem, screw over bonnet, five-point cast-iron handle, solid wedge disk, meets MSS SP-80, type 1, class 150 lb. specifications, threaded ends comply with ANSI B1.20.1, certified to NSF 61.
   
 
1