Home > PLUMBING > ROUGH PLUMBING SUPPLIES > VALVES > STOP & WASTE VALVES
Sort By:
1
Elkhart 32048 Copper Fitting Elkhart 32044 Copper Fitting Elkhart 32050 Copper Fitting
EPC Pipe Reducer, 1/2 x 3/8 in Nominal Size, FTG x Copper, Copper EPC Pipe Reducer, 3/8 x 1/4 in Nominal Size, FTG x Copper, Copper EPC Pipe Reducer, 1/2 x 1/4 in Nominal Size, FTG x Copper, Copper
Genova 400 Sewer and Drain Pipe Cap Elkhart 32064 Copper Fitting B and K Industries 888-221RP Bleeder Caps
Used to permanently or temporarily cap pipe. Meets ASTM D2852. EPC Pipe Reducer, 3/4 x 1/2 in Nominal Size, FTG x Copper, Copper Fits most drainable valves. 3 styles of caps with washers included.
Genova 700 Adjustable P-Trap Without Cleanout Genova 700 P-Trap Without Cleanout Elkhart 32072 Copper Fitting
Used to prevent passage of sewer gas from plumbing system into house through plumbing fixture drain. Used to prevent the passage of sewer gas from the plumbing system into the house through the plumbing fixture drain. EPC Pipe Reducer, 1 x 3/4 in Nominal Size, FTG x Copper, Copper
Genova 700 P-Trap Without Cleanout KBI HBF-0500-T Washerless Sillcock and Angle Lawn Faucet KBI HBF-0750-T Washerless Sillcock and Angle Lawn Faucet
Used to prevent the passage of sewer gas from the plumbing system into the house through the plumbing fixture drain. Bronze color body with red wheel handle. For hot and cold fluid systems up to 180 degrees Fahrenheit and 150 lbs. pressure. Complies with all applicable ASTM and ANSI standards. Bronze color body with red wheel handle. For hot and cold fluid systems up to 180 degrees Fahrenheit and 150 lbs. pressure. Complies with all applicable ASTM and ANSI standards.
KBI SWL-0500-T Stop and Waste Valve Elkhart 30136 Copper Fitting Elkhart 30124 Copper Fitting
Acetal copolymer construction for use in hot or cold fluid systems up to 180 degrees Fahrenheit. Use with water and approved chemicals. Bronze color body with red wheel handle. Santoprene seal for chemical resistance. Allows draining of the non-pressure side of valve via 1/8" port. (polypropylene plug included). Complies with all applicable ASTM and ANSI standards. EPC Pipe Reducing Adapter, 1/2 x 3/8 in Nominal Size, Copper x FNPT, Wrot Copper EPC Pipe Reducing Adapter, 1/2 x 3/8 in Nominal Size, Copper x FNPT, Wrot Copper
Worldwide Sourcing 27-1/2B Black Pipe Malleable Floor Flange KBI SWL-0750-T Stop and Waste Valve Genova 400 Sewer and Drain Bull Nose Tee
Countersunk screw holes, not faced. Standard screwed, for steam and water working pressure up to 150 pounds. Flat banded, right hand threads. Acetal copolymer construction for use in hot or cold fluid systems up to 180 degrees Fahrenheit. Use with water and approved chemicals. Bronze color body with red wheel handle. Santoprene seal for chemical resistance. Allows draining of the non-pressure side of valve via 1/8" port. (polypropylene plug included). Complies with all applicable ASTM and ANSI standards. Used primarily in seepage bed piping grids in conjunction with perforated pipe. Used where flow characteristics are not a primary consideration. Meets ASTM D3034.
Hancor 0499TW Hdpe Sewer And Drain Fitting Genova 700 P-Trap With Union and Without Cleanout Elkhart 32076 Copper Fitting
CSA approved. Used to prevent passage of sewer gas from plumbing system into house through plumbing fixture drain. EPC Pipe Reducer, 1 x 1/2 in Nominal Size, FTG x Copper, Copper
Genova 700 P-Trap With Cleanout Genova 700 Los Angeles P-Trap Worldwide Sourcing 27-3/4B Black Pipe Malleable Floor Flange
Used to prevent the passage of sewer gas from the plumbing system into the house through the plumbing fixture drain. Used to prevent the passage of sewer gas from the plumbing system into house through the plumbing fixture drain.  Used when local code doesn't permit the use of slip coupled traps. Countersunk screw holes, not faced. Standard screwed, for steam and water working pressure up to 150 pounds. Flat banded, right hand threads.
Elkhart 30156 Copper Fitting Elkhart 32084 Copper Fitting VENT CAP 3-4INCH MUSHROOM
EPC Pipe Reducing Adapter, 3/4 x 1/2 in Nominal Size, Copper x FNPT, Wrot Copper EPC Pipe Reducer, 1-1/4 x 3/4 in Nominal Size, FTG x Copper, Copper Mushroom vent cap is designed to fit 3"? or 4" vent stacks. Fully assembled and includes 3 hex-head bolts for easy installation.
B&K Proline Economy Sillcock Valve Elkhart Products 10133582 Copper Fittings Elkhart 32082 Copper Fitting
3/4 hose thread outlet. Six-point cast-iron handle, oversized notched flange, threaded ends comply with ANSI B1.20.1, hose threads comply with ANSI B1.20.7, certified to NSF 61. EPC Pipe Union, 3/4 in Nominal Size, Copper, Copper EPC Pipe Reducer, 1-1/4 x 1 in Nominal Size, FTG x Copper, Copper
Genova 400 Sewer and Drain Sanitary Tee Genova 500 Line Valve Genova 400 Solvent Weld Sewer and Drain Pipe Wye
Used to connect vertical branch line into straight sewer line. Also, used with cleanout to provide access to piping. 3" meets ASTM D2949 or exceeds ASTM D2729; 4" and 6" meet  ASTM D3034. High-temperature thermoplastics designed to be solvent welded to tubing size CPVC piping for hot and cold water. Employs the globe valve principle and the Street/Socket feature which allows use with 1/2" and 3/4" CPVC tubing (Requires couplings for attaching to 3/4" tubing). Bulk. Used to connect horizontal branch line into straight sewer line. Also, used with cleanout to provide access to piping. 3" meets ASTM D2949 or exceeds ASTM D2729; 4" and 6" meet ASTM D3034.
World Wide Sourcing 27-1B Black Pipe Fitting Elkhart Products 30134 Copper Fittings Genova 400 Solvent Weld Sewer and Drain Pipe Wye
Countersunk screw holes, not faced. Standard screwed, for steam and water working pressure up to 150 pounds. Flat banded, right hand threads. EPC Pipe Reducing Adapter, 1/2 X 3/4 in Nominal Size, Copper x FNPT, Wrot Copper Used to connect horizontal branch line into straight sewer line. Also, used with cleanout to provide access to piping. 3" meets ASTM D2949 or exceeds ASTM D2729; 4" and 6" meet ASTM D3034.
Genova 400 Sewer and Drain Sanitary Tee B&K Proline Economy Sillcock Valve B&K Proline Stop and Waste Valve
Used to connect vertical branch line into straight sewer line. Also, used with cleanout to provide access to piping. 3" meets ASTM D2949 or exceeds ASTM D2729; 4" and 6" meet  ASTM D3034. 3/4 hose thread outlet. Six-point cast-iron handle, oversized notched flange, threaded ends comply with ANSI B1.20.1, hose threads comply with ANSI B1.20.7, certified to NSF 61. Rising stem, six-point cast-iron handle, plug allows draining of non-pressure side of valve when closed, solder end comply with ANSI B16.18, certified to NSF 61-G.
Elkhart Products 33580 Copper Fittings Raingo 700 Adjustable P-Trap With Union and Without Cleanout Rectorseal 97402 Magic Trap and Tee
EPC Pipe Union, 1/2 in Nominal Size, Copper, Copper Used to prevent the passage of sewer gas from the plumbing system into the house through the plumbing fixture drain. 1-1/2" tubular polypropylene fitting. Replaces any standard 1-1/2" tubular trap. The micro size Magic Vent (SKU #5757364) screws directly onto the tee connection of the fitting. It automatically places the Magic Vent at the required 4" height above the drain pipe which it is connected. The installation time for the vent system is approximately 25 seconds.
Elkhart 32094 Copper Fitting Genova 69230 Dwv Floor Strainer B&K Proline Quarter Master 1/4 Turn Sillcock Valve
EPC Pipe Reducer, 1-1/2 x 3/4 in Nominal Size, FTG x Copper, Copper Prevents debris from entering a drain opening on the floor. Fits flush into any fitting hub. Easy quarter turn on/off operation regulates water flow from a trickle to wide open. Compact, low-lead compliant, operates easily for long life. Large flow rate for use as any general-purpose hose connection outlet for external water service. 60% copper alloy brass construction with chrome-plated brass ball, Teflon seats, and rust-resistant handle. 125 PSI max working pressure. 3/4" hose thread outlet. IAPMO NSF 61.9 Approved, complies to ASME A112.18.1. Pipe threads comply with ANSI B1.20.1; hose threads comply with ANSI B1.20.7. Handy carton: bin box display packaging; each valve has a data tag with installation instructions and is bar-coded for easy identification.
Novavent 740151 Anti-Siphon Vent Valve B&K Proline Economy Solder Sillcock Valve With Coupling Genova 700 P-Trap With Cleanout
Eliminates expensive secondary vent stacks through the roof. Automatically works to prevent loss of trap seal. Made for use with sinks, basins, tubs, showers, vanities and washing machines. Six-point cast-iron handle, oversized notched flange, solder ends comply with ANSI B16.18, hose threads comply with ANSI B1.20.7, certified to NSF 61. 1/2" C inlet or 3/4" solder connection with 3/4" C x C coupling. Used to prevent the passage of sewer gas from the plumbing system into the house through the plumbing fixture drain.
B&K Proline Quarter Master 1/4 Turn Sillcock Valve B&K Proline Stop and Waste Valve B&K Proline Stop and Waste Valve
Easy quarter turn on/off operation regulates water flow from a trickle to wide open. Compact, low-lead compliant, operates easily for long life. Large flow rate for use as any general-purpose hose connection outlet for external water service. 60% copper alloy brass construction with chrome-plated brass ball, Teflon seats, and rust-resistant handle. 125 PSI max working pressure. 3/4" hose thread outlet. IAPMO NSF 61.9 Approved, complies to ASME A112.18.1. Pipe threads comply with ANSI B1.20.1; hose threads comply with ANSI B1.20.7. Handy carton: bin box display packaging; each valve has a data tag with installation instructions and is bar-coded for easy identification. Rising stem, six-point cast-iron handle, plug allows draining of non-pressure side of valve when closed, solder end comply with ANSI B16.18, certified to NSF 61-G. Rising stem, six-point cast-iron handle, plug allows draining of non-pressure side of valve when closed, threaded ends comply with ANSI B1.20.1, certified to NSF 61-G.
World Wide Sourcing 27-11/4B Black Pipe Mall Floor Flange B&K Proline Stop and Waste Valve Elkhart 30166 Copper Fitting
Countersunk screw holes, not faced. Standard screwed, for steam and water working pressure up to 150 pounds. Flat banded, right hand threads. Rising stem, for use with hot or cold water, plug allows draining of non-pressure side of valve when closed, Solvent ends comply with ASTM 2846, certified to NSF 61. EPC Pipe Reducing Adapter, 1 x 3/4 in Nominal Size, Copper x FNPT, Wrot Copper
B&K Proline Stop and Waste Valve B&K Proline Sillcock Valve With Lock Shield B&K Proline Sillcock Valve With Lock Shield
Rising stem, for use with hot or cold water, plug allows draining of non-pressure side of valve when closed, Solvent ends comply with ASTM 2846, certified to NSF 61. 3/4" threaded outlet. Lockshield prevents unwanted use of valve when handle is removed, oversized notched flange, threaded ends comply with ANSI B1.20.1, hose threads comply with ANSI B1.20.7. 3/4" threaded outlet. Lockshield prevents unwanted use of valve when handle is removed, oversized notched flange, threaded ends comply with ANSI B1.20.1, hose threads comply with ANSI B1.20.7.
World Wide Sourcing B321 50 Black Pipe Fitting Mall Floor Flange B&K Proline 7700 Full Port Solder Ball Valve Elkhart 30154 Copper Fitting
Countersunk screw holes, not faced. Standard screwed, for steam and water working pressure up to 150 pounds. Flat banded, right hand threads. -20 to 300 degrees F temperature range, full port, PTFE seat and packing, chrome-plated brass ball and stem, suitable for vacuum use up to 7 PSIA, port allows non-pressure side to drain when closed, solder ends comply with ANSI B16.18, IAPMO listed to cUPC, certified to NSF 61-G. EPC Pipe Reducing Adapter, 1 x 3/4 in Nominal Size, Copper x FNPT, Wrot Copper
World Wide Sourcing 27-11/2B Black Pipe Mall Floor Flange Elkhart 33584 Copper Fitting B&K Proline Stop and Waste Valve
Countersunk screw holes, not faced. Standard screwed, for steam and water working pressure up to 150 pounds. Flat banded, right hand threads. EPC Pipe Union, 1 in Nominal Size, Copper, Copper Rising stem, six-point cast-iron handle, plug allows draining of non-pressure side of valve when closed, threaded ends comply with ANSI B1.20.1, certified to NSF 61-G.
B & K ProLine Foot Valve B&K Proline 7700 Full Port Ball Valve FV441 4-In-1 Foot Valve
Spring-loaded poppet, O-ring seal, threaded ends comply to ANSI B1.20.1. -20 to 300 degrees F temperature range, full port, PTFE seat and packing, chrome-plated brass ball and stem, suitable for vacuum use up to 7 PSIA, port allows non-pressure side to drain when closed, threaded ends comply with ANSI B1.20.1, IAPMO listed to cUPC, certified to NSF 61-G. Nylon Body. Corrosion resistant parts. Fits four pipe sizes, 3/4", 1", 1-1/4" and 1-1/2".
Arrowhead 255LF Solid Flanged Sillcock Valve Genova 400 Pipe Reducing Bushing Arrowhead 255SWLF Solid Flanged Sillcock Valve
Solid flange sillcock features green coated oval handle with stainless steel screw, 1-piece O-ring bonnet (no packing) and is made of heavy pattern rough brass. Inserts into fitting hub to reduce to smaller pipe size. Meets ASTM D3034. 1/2" I.D. or 3/4" O.D. copper sweat x 3/4" hose connection. 1-piece O-ring bonnet, solid flange & coated oval handle
Arrowhead 355LF Solid Flanged Sillcock Valve Arrowhead 255LSLF Loose Key Solid Flanged Sillcock Valve B&K Proline 7700 Full Port Solder Ball Valve
Solid flange sillcock features green coated oval handle with stainless steel screw, 1-piece O-ring bonnet (no packing) and is made of heavy pattern rough brass. Factory installed loose key lockshield. Key not included (Use key Item # 454.5869 -20 to 300 degrees F temperature range, full port, PTFE seat and packing, chrome-plated brass ball and stem, suitable for vacuum use up to 7 PSIA, port allows non-pressure side to drain when closed, solder ends comply with ANSI B16.18, IAPMO listed to cUPC, certified to NSF 61-G.
B & K ProLine Foot Valve Raingo 700 Adjustable P-Trap Without Cleanout Mueller 104-511 ProLine Anti-Siphon Frost Free Sillcock Valve
Spring-loaded poppet, O-ring seal, threaded ends comply to ANSI B1.20.1. Used to prevent passage of sewer gas from the plumbing system into house through the plumbing fixture drain. CSA certified, meets ASSE standard 1019, chrome-plated body and tube, built-in lockshield, heavy-duty six-point cast-iron handle, threaded ends comply with ANSI b1.20.1, ANSI/NSF 61-9 certified, hose threads comply with ANSI B1.20.7, solder ends comply with ANSI B16.18, backflow preventer checks siphoning back into the water supply, automatically drains upon water shut off.
B&K Proline 7700 Full Port Ball Valve Genova 400 Sewer and Drain Bull Nose Tee Mueller 104-403 ProLine Frost Free Sillcock Valve
-20 to 300 degrees F temperature range, full port, PTFE seat and packing, chrome-plated brass ball and stem, suitable for vacuum use up to 7 PSIA, port allows non-pressure side to drain when closed, threaded ends comply with ANSI B1.20.1, IAPMO listed to cUPC, certified to NSF 61-G. Used primarily in seepage bed piping grids in conjunction with perforated pipe. Used where flow characteristics are not a primary consideration. Meets ASTM D3034. 1/2'' MIP x 1/2'' Sweat. Heavy chrome plated brass, silver soldered construction. Notched flange for stable installation. Chrome plated casting and tube, lockshield, 3/4" hose thread outlet, heavy cast iron handle. Pipe threads comply with ANSI B1.20.1, hose threads comply with ANSI B1.20.7, solder connections comply with ANSI B16.18. CSA certified ANSI/NSF 61-9. UPC Coded. Bulk handy carton.
Mueller 104-513 ProLine Anti-Siphon Frost Free Sillcock Valve Oatey Sure-Vent Air Admittance Valve With SCH 40 Adapter Mueller 104-404 ProLine Frost Free Sillcock Valve
CSA certified, meets ASSE standard 1019, chrome-plated body and tube, built-in lockshield, heavy-duty six-point cast-iron handle, threaded ends comply with ANSI b1.20.1, ANSI/NSF 61-9 certified, hose threads comply with ANSI B1.20.7, solder ends comply with ANSI B16.18, backflow preventer checks siphoning back into the water supply, automatically drains upon water shut off. Adapter allows solvent welding to 1-1/2" or 2" schedule 40 PVC pipe or threads into 2" FIP fitting. For use as a secondary vent. Complies with ANSI/ASSE 1051 A&B. 1/2'' MIP x 1/2'' Sweat. Heavy chrome plated brass, silver soldered construction. Notched flange for stable installation. Chrome plated casting and tube, lockshield, 3/4" hose thread outlet, heavy cast iron handle. Pipe threads comply with ANSI B1.20.1, hose threads comply with ANSI B1.20.7, solder connections comply with ANSI B16.18. CSA certified ANSI/NSF 61-9. UPC Coded. Bulk handy carton.
Elkhart 33585 Copper Fitting TEE PVC BULL NOSE 6IN         Mueller 104-519 ProLine Anti-Siphon Frost Free Sillcock Valve
TEE PVC BULL NOSE 6IN
Our Price: $20.11
EPC Pipe Union, 1-1/4 in Nominal Size, Copper, Copper Used primarily in seepage bed piping grids in conjunction with perforated pipe. Used where flow characteristics are not a primary consideration. Meets ASTM D3034. CSA certified, meets ASSE standard 1019, chrome-plated body and tube, built-in lockshield, heavy-duty six-point cast-iron handle, threaded ends comply with ANSI b1.20.1, ANSI/NSF 61-9 certified, hose threads comply with ANSI B1.20.7, solder ends comply with ANSI B16.18, backflow preventer checks siphoning back into the water supply, automatically drains upon water shut off.
Mueller 104-405 ProLine Frost Free Sillcock Valve B & K ProLine Foot Valve B&K Proline 7700 Full Port Ball Valve
1/2'' MIP x 1/2'' Sweat. Heavy chrome plated brass, silver soldered construction. Notched flange for stable installation. Chrome plated casting and tube, lockshield, 3/4" hose thread outlet, heavy cast iron handle. Pipe threads comply with ANSI B1.20.1, hose threads comply with ANSI B1.20.7, solder connections comply with ANSI B16.18. CSA certified ANSI/NSF 61-9. UPC Coded. Bulk handy carton. Spring-loaded poppet, O-ring seal, threaded ends comply to ANSI B1.20.1. -20 to 300 degrees F temperature range, full port, PTFE seat and packing, chrome-plated brass ball and stem, suitable for vacuum use up to 7 PSIA, port allows non-pressure side to drain when closed, threaded ends comply with ANSI B1.20.1, IAPMO listed to cUPC, certified to NSF 61-G.
Mueller 104-515 ProLine Anti-Siphon Frost Free Sillcock Valve B&K Proline 7700 Full Port Solder Ball Valve Elkhart 33586 Copper Fitting
CSA certified, meets ASSE standard 1019, chrome-plated body and tube, built-in lockshield, heavy-duty six-point cast-iron handle, threaded ends comply with ANSI b1.20.1, ANSI/NSF 61-9 certified, hose threads comply with ANSI B1.20.7, solder ends comply with ANSI B16.18, backflow preventer checks siphoning back into the water supply, automatically drains upon water shut off. -20 to 300 degrees F temperature range, full port, PTFE seat and packing, chrome-plated brass ball and stem, suitable for vacuum use up to 7 PSIA, port allows non-pressure side to drain when closed, solder ends comply with ANSI B16.18, IAPMO listed to cUPC, certified to NSF 61-G. EPC Pipe Union, 1-1/2 in Nominal Size, Copper, Copper
Mueller 104-521 ProLine Anti-Siphon Frost Free Sillcock Valve Rectroseal Magic Vent Micro Size Air Admittance Valve With Tape Mueller 104-517 ProLine Anti-Siphon Frost Free Sillcock Valve
CSA certified, meets ASSE standard 1019, chrome-plated body and tube, built-in lockshield, heavy-duty six-point cast-iron handle, threaded ends comply with ANSI b1.20.1, ANSI/NSF 61-9 certified, hose threads comply with ANSI B1.20.7, solder ends comply with ANSI B16.18, backflow preventer checks siphoning back into the water supply, automatically drains upon water shut off. Eliminates roof penetrations. Multiple use applications. Code allowed, easy to install, and durable. Double guide system and positive seal. Light weight membrane and quiet operation. Insect and tamper resistant. Micro size has a 1-1/2" female threaded connection; however, the valve is rated for 1-1/4" to 2" individual or branch vent pipes. Use with Magic Trap PVC-DWV Fitting (SKU # 7970254). CSA certified, meets ASSE standard 1019, chrome-plated body and tube, built-in lockshield, heavy-duty six-point cast-iron handle, threaded ends comply with ANSI b1.20.1, ANSI/NSF 61-9 certified, hose threads comply with ANSI B1.20.7, solder ends comply with ANSI B16.18, backflow preventer checks siphoning back into the water supply, automatically drains upon water shut off.
Mueller 104-823HC ProLine Quarter Master Anti-Siphon Sillcock Valve Mueller 104-841HC ProLine Quarter Master Anti-Siphon Sillcock Valve Mueller 104-825HC ProLine Quarter Master Anti-Siphon Sillcock Valve
1/2" MIP & 1/2" Sweat. Quarter turn ceramic cartridge. Drains automatically upon water shut off, if the hose is removed or open. Built-in backflow preventer checks siphoning back into water supply. Heavy chrome plated for appearance and corrosion protection. Notched flange allows stable installation on siding. Lead-free silver solder construction. 3/4" hose thread outlet. Pipe threads comply with ANSI B1.20.1; Hose threads comply with ANSI B1.20.7; Solder ends comply with ANSI B16.18. ASSE 1019-A approved;UPC, IAPMO, CSA certified. Certified to NSF 61.Handy carton: bin box display packaging; each valve has a data tag with installation instructions and is bar-coded for easy identification. Handy carton. 1/2" MPT and PEX connection. Easy quarter turn operation. IAPMO - ANSI/NSF-61 approved. Maximum 125 PSI working pressure. Chrome plated brass ball. Teflon seats. 60% copper alloy brass construction. 3/4" hose thread outlet. Large flow rate. Rust resistant handle. Pipe threads comply with ANSI B1.20.1. Hose threads comply with ANSI B1.20.7. Certified to NSF61, ASSE 1019-A, IAPMO, CSA. Handy carton. 1/2" MIP & 1/2" Sweat. Quarter turn ceramic cartridge. Drains automatically upon water shut off, if the hose is removed or open. Built-in backflow preventer checks siphoning back into water supply. Heavy chrome plated for appearance and corrosion protection. Notched flange allows stable installation on siding. Lead-free silver solder construction. 3/4" hose thread outlet. Pipe threads comply with ANSI B1.20.1; Hose threads comply with ANSI B1.20.7; Solder ends comply with ANSI B16.18. ASSE 1019-A approved;UPC, IAPMO, CSA certified. Certified to NSF 61.Handy carton: bin box display packaging; each valve has a data tag with installation instructions and is bar-coded for easy identification. Handy carton.
Genova 400 Solvent Weld Sewer and Drain Pipe Wye B&K Proline Ground Key Stop and Drain Valve Mueller 104-827HC ProLine Quarter Master Anti-Siphon Sillcock Valve
Used to connect horizontal branch line into straight sewer line. Also, used with cleanout to provide access to piping. 3" meets ASTM D2949 or exceeds ASTM D2729; 4" and 6" meet ASTM D3034. Bronze construction, cap pattern, plated tee handle. Drains non-pressure side of line automatically when turned off. Tee handle can be removed to use the valve with a 3/8" square key. Threaded ends comply with ANSI B1.20.2. 1/2" MIP & 1/2" Sweat. Quarter turn ceramic cartridge. Drains automatically upon water shut off, if the hose is removed or open. Built-in backflow preventer checks siphoning back into water supply. Heavy chrome plated for appearance and corrosion protection. Notched flange allows stable installation on siding. Lead-free silver solder construction. 3/4" hose thread outlet. Pipe threads comply with ANSI B1.20.1; Hose threads comply with ANSI B1.20.7; Solder ends comply with ANSI B16.18. ASSE 1019-A approved;UPC, IAPMO, CSA certified. Certified to NSF 61.Handy carton: bin box display packaging; each valve has a data tag with installation instructions and is bar-coded for easy identification. Handy carton.
Mueller 104-845HC ProLine Quarter Master Anti-Siphon Sillcock Valve Mueller 104-829HC ProLine Quarter Master Anti-Siphon Sillcock Valve B&K Proline Ground Key Stop and Drain Valve
1/2" MPT and PEX connection. Easy quarter turn operation. IAPMO - ANSI/NSF-61 approved. Maximum 125 PSI working pressure. Chrome plated brass ball. Teflon seats. 60% copper alloy brass construction. 3/4" hose thread outlet. Large flow rate. Rust resistant handle. Pipe threads comply with ANSI B1.20.1. Hose threads comply with ANSI B1.20.7. Certified to NSF61, ASSE 1019-A, IAPMO, CSA. Handy carton. 1/2" MIP & 1/2" Sweat. Quarter turn ceramic cartridge. Drains automatically upon water shut off, if the hose is removed or open. Built-in backflow preventer checks siphoning back into water supply. Heavy chrome plated for appearance and corrosion protection. Notched flange allows stable installation on siding. Lead-free silver solder construction. 3/4" hose thread outlet. Pipe threads comply with ANSI B1.20.1; Hose threads comply with ANSI B1.20.7; Solder ends comply with ANSI B16.18. ASSE 1019-A approved;UPC, IAPMO, CSA certified. Certified to NSF 61.Handy carton: bin box display packaging; each valve has a data tag with installation instructions and is bar-coded for easy identification. Handy carton. Bronze construction, cap pattern, plated tee handle. Drains non-pressure side of line automatically when turned off. Tee handle can be removed to use the valve with a 3/8" square key. Threaded ends comply with ANSI B1.20.2.
Mueller 104-847HC ProLine Quarter Master Anti-Siphon Sillcock Valve Genova 400 Solvent Weld Sewer and Drain Pipe Wye Mueller 104-849HC ProLine Quarter Master Anti-Siphon Sillcock Valve
1/2" MPT and PEX connection. Easy quarter turn operation. IAPMO - ANSI/NSF-61 approved. Maximum 125 PSI working pressure. Chrome plated brass ball. Teflon seats. 60% copper alloy brass construction. 3/4" hose thread outlet. Large flow rate. Rust resistant handle. Pipe threads comply with ANSI B1.20.1. Hose threads comply with ANSI B1.20.7. Certified to NSF61, ASSE 1019-A, IAPMO, CSA. Handy carton. Used to connect horizontal branch line into straight sewer line. Also, used with cleanout to provide access to piping. 3" meets ASTM D2949 or exceeds ASTM D2729; 4" and 6" meet ASTM D3034. 1/2" MPT and PEX connection. Easy quarter turn operation. IAPMO - ANSI/NSF-61 approved. Maximum 125 PSI working pressure. Chrome plated brass ball. Teflon seats. 60% copper alloy brass construction. 3/4" hose thread outlet. Large flow rate. Rust resistant handle. Pipe threads comply with ANSI B1.20.1. Hose threads comply with ANSI B1.20.7. Certified to NSF61, ASSE 1019-A, IAPMO, CSA. Handy carton.
Mueller 104-851HC ProLine Quarter Master Anti-Siphon Sillcock Valve Mueller 104-795HC Frost Free Quarter Turn Sillcock Valve Mueller 104 Anti-Siphon Frost Free Quarter Turn Sillcock Valve
1/2" MPT and PEX connection. Easy quarter turn operation. IAPMO - ANSI/NSF-61 approved. Maximum 125 PSI working pressure. Chrome plated brass ball. Teflon seats. 60% copper alloy brass construction. 3/4" hose thread outlet. Large flow rate. Rust resistant handle. Pipe threads comply with ANSI B1.20.1. Hose threads comply with ANSI B1.20.7. Certified to NSF61, ASSE 1019-A, IAPMO, CSA. Handy carton. Mueller Sillcock Valve, Frost Free Quarter Turn, Series: 104, Push-Fit Inlet, 1/2 in Inlet, GHT Outlet, 1/2 in Outlet, 8 in Length Through Valve, 125 psi, Brass Body, Chrome Plated 1/2" MPT and PEX connection. Easy quarter turn operation. IAPMO - ANSI/NSF-61 approved. Maximum 125 PSI working pressure. Chrome plated brass ball. Teflon seats. 60% copper alloy brass construction. 3/4" hose thread outlet. Large flow rate. Rust resistant handle. Pipe threads comply with ANSI B1.20.1. Hose threads comply with ANSI B1.20.7. Certified to NSF61, ASSE 1019-A, IAPMO, CSA. Handy carton.
Simmons 400SB Foot Valve Mueller 104-797HC Frost Free Quarter Turn Sillcock Valve Arrowhead 456-04LF Standard Frost Free Hydrant
Silicon bronze cast body and poppet contain less than 0.05% Lead. Furnished with Buna-N o-ring, stainless steel perforated strainer, spring and locknut. No.404SB enters 2" pipe. 400 PSI working pressure. Mueller Sillcock Valve, Frost Free Quarter Turn, Series: 104, Push-Fit Inlet, 1/2 in Inlet, GHT Outlet, 1/2 in Outlet, 10 in Length Through Valve, 125 psi, Brass Body, Chrome Plated 1/2" MIP & 1/2" Sweat. Solid flange permits easy anchoring to frame buildings. Constructed of all brass and type L copper, 1-piece O-ring bonnet & rubber coated oval handle.
Arrowhead 455-04LF Frost Free Hydrant Arrowhead 456-06LF Standard Frost Free Hydrant Arrowhead 455-06LF Frost Free Hydrant
Heavy pattern brass construction with satin/nickel weather protection coating. 1-piece O-ring bonnet (no packing nut) and green coated oval handle with stainless steel screw. 1/2" MIP & 1/2" Sweat. Solid flange permits easy anchoring to frame buildings. Constructed of all brass and type L copper, 1-piece O-ring bonnet & rubber coated oval handle. Heavy pattern brass construction with satin/nickel weather protection coating. 1-piece O-ring bonnet (no packing nut) and green coated oval handle with stainless steel screw.
Arrowhead 456-10LF Standard Frost Free Hydrant Arrowhead 455-10LF Frost Free Hydrant Simmons 400SB Foot Valve
1/2" MIP & 1/2" Sweat. Solid flange permits easy anchoring to frame buildings. Constructed of all brass and type L copper, 1-piece O-ring bonnet & rubber coated oval handle. Heavy pattern brass construction with satin/nickel weather protection coating. 1-piece O-ring bonnet (no packing nut) and green coated oval handle with stainless steel screw. Silicon bronze cast body and poppet contain less than 0.05% Lead. Furnished with Buna-N o-ring, stainless steel perforated strainer, spring and locknut. No.404SB enters 2" pipe. 400 PSI working pressure.
Arrowhead 455-08LF Frost Free Hydrant Arrowhead 456-08LF Standard Frost Free Hydrant Arrowhead 455-12LF Frost Free Hydrant
Heavy pattern brass construction with satin/nickel weather protection coating. 1-piece O-ring bonnet (no packing nut) and green coated oval handle with stainless steel screw. 1/2" MIP & 1/2" Sweat. Solid flange permits easy anchoring to frame buildings. Constructed of all brass and type L copper, 1-piece O-ring bonnet & rubber coated oval handle. Heavy pattern brass construction with satin/nickel weather protection coating. 1-piece O-ring bonnet (no packing nut) and green coated oval handle with stainless steel screw.
Arrowhead 456-12LF Standard Frost Free Hydrant Elkhart 33587 Copper Fitting Simmons 400SB Dual Purpose Threaded Foot Valve
1/2" MIP & 1/2" Sweat. Solid flange permits easy anchoring to frame buildings. Constructed of all brass and type L copper, 1-piece O-ring bonnet & rubber coated oval handle. EPC Pipe Union, 2 in Nominal Size, Copper, Copper Silicon bronze cast body and poppet. Stainless steel perforated strainer.
Simmons 400SB Dual Purpose Threaded Foot Valve Simmons 400SB Foot Valve Genova 400 Sewer and Drain Sanitary Tee
Silicon bronze cast body and poppet. Stainless steel perforated strainer. Silicon bronze cast body and poppet contain less than 0.05% Lead. Furnished with Buna-N o-ring, stainless steel perforated strainer, spring and locknut. No.404SB enters 2" pipe. 400 PSI working pressure. Used to connect vertical branch line into straight sewer line. Also, used with cleanout to provide access to piping. 3" meets ASTM D2949 or exceeds ASTM D2729; 4" and 6" meet  ASTM D3034.
Arrowhead 425-08LF Anti-Siphon Frost Free Hydrant Arrowhead 425-10LF Anti-Siphon Frost Free Hydrant Arrowhead 425-12LF Anti-Siphon Frost Free Hydrant
Features integral vacuum breaker with vandal-resistant vented cap. Backflow preventer, rubber coated green oval handle to help battle corrosion with stainless steel screw. 1-piece O-ring bonnet (no more packing). Internal check valve is springless and works with water pressure. ASSE 1019 and IAPMO listed. Features integral vacuum breaker with vandal-resistant vented cap. Backflow preventer, rubber coated green oval handle to help battle corrosion with stainless steel screw. 1-piece O-ring bonnet (no more packing). Internal check valve is springless and works with water pressure. ASSE 1019 and IAPMO listed. Features integral vacuum breaker with vandal-resistant vented cap. Backflow preventer, rubber coated green oval handle to help battle corrosion with stainless steel screw. 1-piece O-ring bonnet (no more packing). Internal check valve is springless and works with water pressure. ASSE 1019 and IAPMO listed.
Simmons 400SB Dual Purpose Threaded Foot Valve Simmons 400SB Foot Valve
Silicon bronze cast body and poppet. Stainless steel perforated strainer. Silicon bronze cast body and poppet contain less than 0.05% Lead. Furnished with Buna-N o-ring, stainless steel perforated strainer, spring and locknut. No.404SB enters 2" pipe. 400 PSI working pressure.
   
 
1