Home > PLUMBING > ROUGH PLUMBING SUPPLIES > VALVES > HOSE BIBBS
Sort By:
1
Genova Products 71115 PVC-DWV Sanitary Tee Genova 400 Solvent Weld Sewer and Drain Pipe Coupling Genova Products 71120 PVC-DWV Sanitary Tee
Used when connecting a branch line into vertical drain pipe (stack). Used to join straight lengths of pipe for sewer lines, septic tank and seepage systems. 3" meets or exceeds ASTM D2949 or exceeds ASTM D2729; 4" and 6" meet ASTM D3034. Used when connecting a branch line into vertical drain pipe (stack).
Genova Products 71121 PVC-DWV Sanitary Tee Genova 71123 PVC-DWV Fitting Genova 400 Solvent Weld Sewer and Drain Pipe Coupling
Used when connecting a branch line into a vertical drain pipe (stack). Used when connecting a branch line into a vertical drain pipe (stack). Used to join straight lengths of pipe for sewer lines, septic tank and seepage systems. 3" meets or exceeds ASTM D2949 or exceeds ASTM D2729; 4" and 6" meet ASTM D3034.
Mueller ProLine Quarter Turn Solvent Ball Valve Mueller ProLine Quarter Turn Ball Valve Mueller ProLine In-Line Check Valve
For use with cold-water applications, TPV seats, NBR O-rings, fits both schedule 40 and 80 pipes, solvent ends comply with ASTM D2466, certified to NSF 61-G. For used with cold water applications,TPV seats NBR O-rings, fits both schedule 40 and 80 pipes, threaded ends comply with ANSI B1.20.1, certified to NSF 61-G. Fits both schedule 40 and 80 pipes, spring-loaded poppet, stainless steel spring, O-ring seal, solvent ends comply with ASTM D2466. Not for use with compressed air.
Mueller ProLine In-Line Check Valve Genova 700 Solvent Weld Dwv Pipe Wye Genova 700 Solvent Weld Dwv Pipe Wye
Fits both schedule 40 and 80 pipes, spring-loaded poppet, stainless steel spring, O-ring seal, solvent ends comply with ASTM D2466. Not for use with compressed air. Used when connecting a branch line into a horizontal drain pipe. Also can be used in conjunction with a Twist-Lok plug to provide a cleanout in a drain pipe. Used when connecting a branch line into a horizontal drain pipe. Also can be used in conjunction with a Twist-Lok plug to provide a cleanout in a drain pipe.
Genova 71416 PVC-DWV Fitting Genova 400 Pipe Elbow NDS EBV-0500-S 1-Piece Economy Full Port In-Line Ball Valve
Used in conjunction with a threaded plug to provide a cleanout opening. Teflon thread tape is recommended for threaded joints. Used to change direction in piping for sewer lines, septic tank and seepage systems. Sometimes called an eighth bend. Meets ASTM D3034. Low profile and compact economy design. PVC construction. 150 PSI rated at 730. (Not for use with compressed air). Solid Teflon seats. Large flow opening. White color. NSF standard listed.
NDS EBV-0500-T 1-Piece Economy Full Port In-Line Ball Valve Genova 73515 PVC-DWV Fitting Genova 400 Pipe Elbow
Low profile and compact economy design. PVC construction. 150 PSI rated at 730. (Not for use with compressed air). Solid Teflon seats. Large flow opening. White color. NSF standard listed. Used to bring two branch lines into a vertical drain pipe (stack). Used to change direction in piping for sewer lines, septic tank and seepage systems. Sometimes called an eighth bend. Meets ASTM D3034.
Genova 71421 PVC-DWV Fitting NDS EBV-0750-S 1-Piece Economy Full Port In-Line Ball Valve NDS EBV-0750-T 1-Piece Economy Full Port In-Line Ball Valve
Used in conjunction with a threaded plug to provide a cleanout opening. Teflon thread tape is recommended for threaded joints. Low profile and compact economy design. PVC construction. 150 PSI rated at 730. (Not for use with compressed air). Solid Teflon seats. Large flow opening. White color. NSF standard listed. Low profile and compact economy design. PVC construction. 150 PSI rated at 730. (Not for use with compressed air). Solid Teflon seats. Large flow opening. White color. NSF standard listed.
Genova 700 Solvent Weld Dwv Pipe Reducing Wye Mueller 107-634 Quarter Turn Solvent Ball Valve Mueller ProLine Quarter Turn Ball Valve
Used when connecting a reducing branch line into a horizontal drain pipe. Also, can be used in conjunction with a Twist-Lok plug to provide a cleanout in a drain pipe. For use with cold-water applications, TPV seats, NBR O-rings, fits both schedule 40 and 80 pipes, solvent ends comply with ASTM D2466, certified to NSF 61-G. For used with cold water applications,TPV seats NBR O-rings, fits both schedule 40 and 80 pipes, threaded ends comply with ANSI B1.20.1, certified to NSF 61-G.
Genova 71122 PVC-DWV Fitting Mueller ProLine Quarter Turn Ball Valve Genova 700 Combination Solvent Weld Pipe Tee-Wye
Used when connecting a branch line into a vertical drain pipe (stack). For use with hot or cold water applications, PTFE seats, EPDM O-rings, solvent ends comply with ASTM D2466, certified to NSF 61-G. Required in some plumbing code areas to connect branch line into a vertical drain pipe instead of conventional tee fitting. Also used to connect horizontal branch pipe approaching a horizontal drain pipe on the perpendicular. (Can be made from a wye and street eighth bend.)
Genova 420 Street Pipe Elbow Genova Products 45234 PVC Sewer and Drain Fittings Genova 700 Combination Solvent Weld Pipe Tee-Wye
Used to change direction in piping for sewer lines, septic tank and seepage systems. Sometimes called a street eighth bend. 3" meets ASTM D2949 or exceeds ASTM D2729; 4" and 6" meet ASTM D3034. Used to connect rain gutter downspouts to underground sewer piping. Required in some plumbing code areas to connect branch line into a vertical drain pipe instead of conventional tee fitting. Also used to connect horizontal branch pipe approaching a horizontal drain pipe on the perpendicular. (Can be made from a wye and street eighth bend.)
Mueller ProLine Quarter Turn Ball Valve Celcon SFT-0500-T Hose Bibb Genova Products 75340 PVC Sewer and Drain Adapter Bushings
Rated for 150 PSI at 73 Deg. F., for use with cold-water applications, gray color, PTFE seats, EPDM O-rings. Threaded ends comply with ANSI B1.20.1. Certified to NSF 61-G. Lead-free compliant. Bronze colored body with black t-handle. Santoprene seal for chemical resistance. For use in hot or cold fluid systems up to 180 degrees Fahrenheit. Complies with all applicable ASTM and ANSI standards. Adapts 4" S&D to 4" DWV. Conforms to ASTM D-1784.
Genova Products 71130 PVC-DWV Sanitary Tee Celcon SFT-0750-T Hose Bibb Genova 40143 PVC Sewer and Drain Fitting
Used when connecting a branch line into vertical drain pipe (stack). Bronze colored body with black t-handle. Santoprene seal for chemical resistance. For use in hot or cold fluid systems up to 180 degrees Fahrenheit. Complies with all applicable ASTM and ANSI standards. Used to increase or reduce pipe sizes.
Genova Products 71131 PVC-DWV Sanitary Tee Genova 700 Dwv Reducing Double Sanitary Tee Genova Products 71132 PVC-DWV Sanitary Tee
Used when connecting a branch line into a vertical drain pipe (stack). Used to bring two reducing branch lines into a vertical drain pipe (stack). Used when connecting a branch line into a vertical drain pipe (stack).
Genova 400 Pipe Elbow Genova 420 Sanitary Pipe Elbow Genova 420 Street Pipe Elbow
Used to change direction in piping for sewer lines, septic tank and seepage systems. Sometimes called a sixteenth bend. 3" meets ASTM D2949 or exceeds ASTM D2729. Used to change direction in piping for sewer lines, septic tank and seepage systems. Sometimes called a quarter bend. 3" meets ASTM D2949 or exceeds ASTM D2729; 4" and 6" meet ASTM D3034. Used to change direction in piping for sewer lines, septic tank and seepage systems. Sometimes called a street eighth bend. 3" meets ASTM D2949 or exceeds ASTM D2729; 4" and 6" meet ASTM D3034.
Mueller ProLine In-Line Check Valve Mueller 107-342NL Full Port Ball Valve Genova 420 Sanitary Pipe Elbow
Fits both schedule 40 and 80 pipes, spring-loaded poppet, stainless steel spring, O-ring seal, solvent ends comply with ASTM D2466. Not for use with compressed air. 400 PSI WOG, 160 PSI at 73DegF, full port, packing gland, PTFE seat and packing, chrome-plated brass ball and stem, ideal for use in potable water and radiant heating applications, PEX connections comply with ASTM F-1807, IAPMO listd to cUPC, certified to NSF 61-G. Used to change direction in piping for sewer lines, septic tank and seepage systems. Sometimes called a quarter bend. 3" meets ASTM D2949 or exceeds ASTM D2729; 4" and 6" meet ASTM D3034.
Genova 700 Dwv Double Sanitary Tee Genova 700 Solvent Weld Dwv Pipe Reducing Wye Genova 400 Solvent Weld Sewer and Drain Pipe Adapter Coupling
Used to bring two branch lines into a vertical drain pipe (stack). Used when connecting a reducing branch line into a horizontal drain pipe. Also, can be used in conjunction with a Twist-Lok plug to provide a cleanout in a drain pipe. Used to join straight lengths of pipe for sewer lines, septic tank and seepage systems.
Mueller ProLine Quarter Turn Ball Valve NDS EBV-1000-T 1-Piece Economy Full Port In-Line Ball Valve NDS EBV-1000-S 1-Piece Economy Full Port In-Line Ball Valve
For use with hot or cold water applications, PTFE seats, EPDM O-rings, solvent ends comply with ASTM D2466, certified to NSF 61-G. Low profile and compact economy design. PVC construction. 150 PSI rated at 730. (Not for use with compressed air). Solid Teflon seats. Large flow opening. White color. NSF standard listed. Low profile and compact economy design. PVC construction. 150 PSI rated at 730. (Not for use with compressed air). Solid Teflon seats. Large flow opening. White color. NSF standard listed.
Genova 700 Solvent Weld Dwv Pipe Wye Genova 700 Solvent Weld Dwv Pipe Reducing Wye Genova 420 Sanitary Street Pipe Elbow
Used when connecting a branch line into a horizontal drain pipe. Also can be used in conjunction with a Twist-Lok plug to provide a cleanout in a drain pipe. Used when connecting a reducing branch line into a horizontal drain pipe. Also, can be used in conjunction with a Twist-Lok plug to provide a cleanout in a drain pipe. Used to change direction in piping for sewer lines, septic tank and seepage systems. Sometimes called a street quarter bend. 3" meets ASTM D2949 or exceeds ASTM D2729; 4" meets ASTM D3034.
Genova 700 Solvent Weld Dwv Pipe Double Wye Genova 420 Sanitary Street Pipe Elbow Mueller ProLine Quarter Turn Solvent Ball Valve
Used to bring two branch lines into a horizontal drain pipe in drain-waste-vent applications. Used to change direction in piping for sewer lines, septic tank and seepage systems. Sometimes called a street quarter bend. 3" meets ASTM D2949 or exceeds ASTM D2729; 4" meets ASTM D3034. For use with cold-water applications, TPV seats, NBR O-rings, fits both schedule 40 and 80 pipes, solvent ends comply with ASTM D2466, certified to NSF 61-G.
Mueller ProLine Quarter Turn Ball Valve Genova 71431 PVC-DWV Fitting SC125B Sump Check Valve
For used with cold water applications,TPV seats NBR O-rings, fits both schedule 40 and 80 pipes, threaded ends comply with ANSI B1.20.1, certified to NSF 61-G. Used in conjunction with a threaded plug to provide a cleanout opening. Teflon thread tape is recommended for threaded joints. Durable sonic welded thermo-plastic body.
B & K 102-303 No-Kink Hose Bibb Mueller ProLine Quarter Turn Ball Valve Genova 400 Pipe Elbow
For use with water or oil. multi-turn operation, 3/4" hose thread outlet, large flow area, threaded ends comply with ANSI B1.20.1, hose threads comply with ANSI B1.20.7. Rated for 150 PSI at 73 Deg. F., for use with cold-water applications, gray color, PTFE seats, EPDM O-rings. Threaded ends comply with ANSI B1.20.1. Certified to NSF 61-G. Lead-free compliant. Used to change direction in piping for sewer lines, septic tank and seepage systems. Sometimes called a sixteenth bend. 3" meets ASTM D2949 or exceeds ASTM D2729.
B & K 102-403 No-Kink Hose Bibb B & K 102-304 No-Kink Hose Bibb Genova 700 Combination Solvent Weld Pipe Reducing Tee/Wye
For use with water or oil, multi-turn operation, 3/4" hose thread outlet, threaded ends comply with ANSI B1.20.1, hose threads comply with ANSI B1.20.7 For use with water or oil. multi-turn operation, 3/4" hose thread outlet, large flow area, threaded ends comply with ANSI B1.20.1, hose threads comply with ANSI B1.20.7. Required in some plumbing code areas to connect a branch line into a vertical drain pipe (stack) instead of a conventional tee fitting. Also used to connect a horizontal branch pipe approaching a horizontal drain pipe on the perpendicular.
B & K QuarterMaster No-Kink Hose Bibb Genova 400 Short Turn Pipe Elbow B & K 103-003 Hose Bibb
Easy quarter turn on/off operation regulates water flow from a trickle to wide open. Compact, low-lead compliant, operates easily for long life. Large flow rate for use as any general-purpose hose connection outlet for external water service. 60% copper alloy brass construction with chrome-plated brass ball, Teflon seats, and rust-resistant handle. 125 PSI max working pressure. 3/4" hose thread outlet. IAPMO ANSI/NSF 61 Approved. Pipe threads comply with ANSI B1.20.1; hose threads comply with ANSI B1.20.7. Handy carton: bin box display packaging; each valve has a data tag with installation instructions and is bar-coded for easy identification. Carton Used to change direction in piping for sewer lines, septic tank and seepage systems. Sometimes called a short turn quarter bend. 4" and 6" meet ASTM D3034. 3/4" hose thread outlet, threaded  ends comply with ANSI B1.20.1, hose threads comply with ANSI B1.20.7
Mueller ProLine Full Port Ball Valve Genova 700 Solvent Weld Dwv Pipe Double Wye Mueller ProLine Quarter Turn Solvent Ball Valve
400 PSI WOG, 160 PSI at 73DegF, full port, packing gland, PTFE seat and packing, chrome-plated brass ball and stem, ideal for use in potable water and radiant heating applications, PEX connections comply with ASTM F-1807, IAPMO listd to cUPC, certified to NSF 61-G. Used to bring two branch lines into a horizontal drain pipe in drain-waste-vent applications. For use with cold-water applications, TPV seats, NBR O-rings, fits both schedule 40 and 80 pipes, solvent ends comply with ASTM D2466, certified to NSF 61-G.
Mueller ProLine Quarter Turn Ball Valve B & K 103-003 Hose Bibb B & K 102-404 No-Kink Hose Bibb
For used with cold water applications,TPV seats NBR O-rings, fits both schedule 40 and 80 pipes, threaded ends comply with ANSI B1.20.1, certified to NSF 61-G. 3/4" hose thread outlet, threaded  ends comply with ANSI B1.20.1, hose threads comply with ANSI B1.20.7 For use with water or oil, multi-turn operation, 3/4" hose thread outlet, threaded ends comply with ANSI B1.20.1, hose threads comply with ANSI B1.20.7
Genova 400 Drain Pipe Adapter B & K QuarterMaster No-Kink Hose Bibb Mueller ProLine Full Port Ball Valve
Adapts sewer pipe to standard male pipe threads for sewer lines, septic tank and seepage systems. Meets ASTM D3034. Easy quarter turn on/off operation regulates water flow from a trickle to wide open. Compact, low-lead compliant, operates easily for long life. Large flow rate for use as any general-purpose hose connection outlet for external water service. 60% copper alloy brass construction with chrome-plated brass ball, Teflon seats, and rust-resistant handle. 125 PSI max working pressure. 3/4" hose thread outlet. IAPMO-ansi/ nsf 61-9 Approved. Pipe threads comply with ANSI B1.20.1; hose threads comply with ANSI B1.20.7. Handy carton: bin box display packaging; each valve has a data tag with installation instructions and is bar-coded for easy identification. Carton -20 to 300 degrees F temperature range, full port, packing gland, PTFE seat and packing, chrome-plated ball and stem, CSA certified to ASME B16.33 (5G) and B16.44 (125G), CR91-002 (1/2, 2, & 5 psig), UL gas shutoff valve (YRPV), UL manual valves (MHKZ), UL compressed gas shutoff valve (YQNZ), UL flammable liquid shutoff valve (YRBX), UL LP-gas shutoff valve (YSDT), FM approved, threaded ends comply with ANSI B1.20.1, IAMPO listed to cUPC, certified to NSF 61-G.
Mueller ProLine Full Port Ball Valve B & K QuarterMaster No-Kink Hose Bibb Mueller ProLine Quarter Turn Ball Valve
-20 to 300 degrees F temperature range, full port, packing gland, PTFE seat and packing, chrome-plated ball and stem, CSA certified to ASME B16.33 (5G) and B16.44 (125G), CR91-002 (1/2, 2, & 5 psig), UL gas shutoff valve (YRPV), UL manual valves (MHKZ), UL compressed gas shutoff valve (YQNZ), UL flammable liquid shutoff valve (YRBX), UL LP-gas shutoff valve (YSDT), FM approved, threaded ends comply with ANSI B1.20.1, IAMPO listed to cUPC, certified to NSF 61-G. Easy quarter turn on/off operation regulates water flow from a trickle to wide open. Compact, low-lead compliant, operates easily for long life. Large flow rate for use as any general-purpose hose connection outlet for external water service. 60% copper alloy brass construction with chrome-plated brass ball, Teflon seats, and rust-resistant handle. 125 PSI max working pressure. 3/4" hose thread outlet. IAPMO ANSI/NSF 61 Approved. Pipe threads comply with ANSI B1.20.1; hose threads comply with ANSI B1.20.7. Handy carton: bin box display packaging; each valve has a data tag with installation instructions and is bar-coded for easy identification. Carton For used with cold water applications,TPV seats NBR O-rings, fits both schedule 40 and 80 pipes, threaded ends comply with ANSI B1.20.1, certified to NSF 61-G.
B & K QuarterMaster No-Kink Hose Bibb Mueller ProLine Quarter Turn Solvent Ball Valve Genova Products 45330 PVC Sewer and Drain Adapter Bushings
Easy quarter turn on/off operation regulates water flow from a trickle to wide open. Compact, low-lead compliant, operates easily for long life. Large flow rate for use as any general-purpose hose connection outlet for external water service. 60% copper alloy brass construction with chrome-plated brass ball, Teflon seats, and rust-resistant handle. 125 PSI max working pressure. 3/4" hose thread outlet. IAPMO-ansi/ nsf 61-9 Approved. Pipe threads comply with ANSI B1.20.1; hose threads comply with ANSI B1.20.7. Handy carton: bin box display packaging; each valve has a data tag with installation instructions and is bar-coded for easy identification. Carton For use with cold-water applications, TPV seats, NBR O-rings, fits both schedule 40 and 80 pipes, solvent ends comply with ASTM D2466, certified to NSF 61-G. Adapts 3" S&D to 3" DWV. Meets or exceeds ASTM D2949 or exceeds ASTM D2729.
VALVE GARDHOSE 1/2PEX X 3/4MH Genova 700 Dwv Reducing Double Sanitary Tee Mueller ProLine Compact Pattern Standard Port Gate Valve
Used to bring two reducing branch lines into a vertical drain pipe (stack). Standard port, non-rising stem, six-point cast-iron handle, brass wedge disk, solder ends comply with ANSI B16.18, certified to NSF 61.
B & K QuarterMaster Hose Bibb Mueller ProLine Full Port Ball Valve Genova Products 71140 PVC-DWV Sanitary Tee
Easy quarter turn on/off operation regulates water flow from a trickle to wide open. Compact, low-lead compliant, operates easily for long life. Large flow rate for use as any general-purpose hose connection outlet for external water service. 60 percent copper alloy brass construction with chrome-plated brass ball, Teflon seats, and rust-resistant handle. 125 PSI max working pressure. 3/4" hose thread outlet. IAPMO NSI/NSF 61 Approved. Pipe threads comply with ANSI B1.20.1; hose threads comply with ANSI B1.20.7. Handy carton: bin box display packaging; each valve has a data tag with installation instructions and is bar-coded for easy identification. Carton. -40 to 194 degrees F temperature range, full port, packing gland, PTFE seat and packing, chrome-plated brass ball and stem, solder ends comply with ANSI B16.18, IAMPO IGC 157 certified, IAPMO listed to cUPC, certified to NSF 61-G. Used when connecting a branch line into vertical drain pipe (stack).
B & K 103-013 Hose Bibb Genova 700 Solvent Weld Dwv Pipe Reducing Wye Mueller ProLine Quarter Turn Ball Valve
Neoprene seal washer, 3/4" hose thread outlet, high flow rate capability, threaded ends comply with ANSI B1.20.1, hose threads comply with ANSI B1.20.7, certified to NSF 61. Used when connecting a reducing branch line into a horizontal drain pipe. Also, can be used in conjunction with a Twist-Lok plug to provide a cleanout in a drain pipe. For use with hot or cold water applications, PTFE seats, EPDM O-rings, solvent ends comply with ASTM D2466, certified to NSF 61-G.
Mueller ProLine Compact Pattern Standard Port Gate Valve Sta-Rite FP0026-6D-P2 Sump Pump Check Valve Genova 73532 PVC-DWV Fitting
Standard port, non-rising stem, six-point cast-iron handle, brass wedge disk, threaded ends comply with ANSI B1.20.1, certified to NSF 61. Double-threaded for use with 1-1/4" or 1-1/2" sump pump discharges, Discharge side designed to allow discharge hose to clamp directly in place, built-in anti-airlock hole. Used to bring two reducing branch lines into a vertical drain pipe (stack).
B & K 103-014 Hose Bibb Genova 400 Pipe Adapter NDS flo Control 1011 Reinforced Poppet Check Valve
Neoprene seal washer, 3/4" hose thread outlet, high flow rate capability, threaded ends comply with ANSI B1.20.1, hose threads comply with ANSI B1.20.7, certified to NSF 61. Can be joined to cast iron with Genova Plastic Lead Seal or hot molten lead for sewer lines, septic tank and seepage systems. Made of High-Impact PVC type II material. 1/2 pound spring gives positive seal with no back pressure. Reinforced Poppet.. Designed for any system where back flow is not desired. Spas, swimming pools, industrial and irrigation. Complies with all applicable ASTM and ANSI standards. KC-1500-S and KC-2000-S are UL recognized spa component.
NDS flo Control 1001 Reinforced Poppet Check Valve Mueller ProLine Full Port Ball Valve Mueller ProLine In-Line Check Valve
Made of High-Impact PVC type II material. 1/2 pound spring gives positive seal with no back  pressure. Reinforced Poppet. Designed for any system where back flow is not desired. Spas, swimming pools, industrial and irrigation. Complies with all applicable ASTM and ANSI standards. -20 to 300 degrees F temperature range, full port, packing gland, PTFE seat and packing, chrome-plated brass ball and stem, solder ends comply with ANSI B16.18, IAPMO listed to cUPC, certified to NSF 61-G. Fits both schedule 40 and 80 pipes, spring-loaded poppet, stainless steel spring, O-ring seal, solvent ends comply with ASTM D2466. Not for use with compressed air.
Genova 79230 Dwv Floor Strainer Genova 400 Solvent Weld Sewer and Drain Pipe Adapter Coupling B & K QuarterMaster Hose Bibb
Prevents debris from entering a drain opening on the floor. Fits flush into any fitting hub flush to the floor. Used to join straight lengths of pipe for sewer lines, septic tank and seepage systems. Easy quarter turn on/off operation regulates water flow from a trickle to wide open. Compact, low-lead compliant, operates easily for long life. Large flow rate for use as any general-purpose hose connection outlet for external water service. 60 percent copper alloy brass construction with chrome-plated brass ball, Teflon seats, and rust-resistant handle. 125 PSI max working pressure. 3/4" hose thread outlet. IAPMO NSI/NSF 61 Approved. Pipe threads comply with ANSI B1.20.1; hose threads comply with ANSI B1.20.7. Handy carton: bin box display packaging; each valve has a data tag with installation instructions and is bar-coded for easy identification. Carton.
Mueller ProLine Quarter Turn Ball Valve Genova 700 Combination Solvent Weld Pipe Tee-Wye Mueller ProLine Swing Check Valve
Rated for 150 PSI at 73 Deg. F., for use with cold-water applications, gray color, PTFE seats, EPDM O-rings. Threaded ends comply with ANSI B1.20.1. Certified to NSF 61-G. Lead-free compliant. Required in some plumbing code areas to connect a branch line into vertical drain pipe instead of conventional tee fitting. Also used to connect a horizontal branch pipe approaching a horizontal drain pipe on the perpendicular. (Can be made from a wye and a street eighth bend.) Certified to NSF 61 requirements.
Apollo APXV1212 Quarter Turn Ball Valve Mueller ProLine Full Port Gate Valve Genova 71141 PVC-DWV Fitting
Apollo Ball Valve, Quarter Turn, Series: APXV1212, 1/2 in, 32 - 180 deg F, Crimpex End Connection, Brass Body, NSF Approved, ASTM F1807 Full port, non-rising stem, six-point cast-iron handle, brass wedge disk, threaded ends comply with ANSI B1.20.1, certified to NSF 61. Used when connecting a branch line into a vertical drain pipe (stack).
NDS EBV-1250-S 1-Piece Economy Full Port In-Line Ball Valve NDS EBV-1250-T 1-Piece Economy Full Port In-Line Ball Valve Mueller ProLine Full Port Ball Valve
Low profile and compact economy design. PVC construction. 150 PSI rated at 730. (Not for use with compressed air). Solid Teflon seats. Large flow opening. White color. NSF standard listed. Low profile and compact economy design. PVC construction. 150 PSI rated at 730. (Not for use with compressed air). Solid Teflon seats. Large flow opening. White color. NSF standard listed. Nickel finish, full port, PTFE disc and seat, frost-proof stainless steel ball design, CSA ANSI Z 21.15 (1/2 PSIG), CSA certified to ASME B 16.33 (5G), CSA certified to ASME B16.44 (125G), UL gas shutoff valve (YRPV), UL manual valves (MHKZ), UL compressed gas shutoff valve (YQNZ), UL flammable liquid shutoff valve (YRBX), UL LP-Gas shutoff valve (YSDT), FM approved, comforms to MSS-SP-110, meets fed spec WW-V-35, Type II, Class A Style 3, threaded ends comply with ANSI B1.20.1, certified to NSF 61-G.
NDS flo Control 1011 Reinforced Poppet Check Valve NDS flo Control 1001 Reinforced Poppet Check Valve Mueller ProLine Full Port Ball Valve
Made of High-Impact PVC type II material. 1/2 pound spring gives positive seal with no back pressure. Reinforced Poppet.. Designed for any system where back flow is not desired. Spas, swimming pools, industrial and irrigation. Complies with all applicable ASTM and ANSI standards. KC-1500-S and KC-2000-S are UL recognized spa component. Made of High-Impact PVC type II material. 1/2 pound spring gives positive seal with no back  pressure. Reinforced Poppet. Designed for any system where back flow is not desired. Spas, swimming pools, industrial and irrigation. Complies with all applicable ASTM and ANSI standards. -40 to 194 degrees F temperature range, full port, packing gland, PTFE seat and packing, chrome-plated brass ball and stem, CSA certified to 1/2 psig, CSA certified to ASME B16.33(5G), B16.44 (125G), threaded ends comply with ANSI B1.20.1, IAMPO IGC 157 certified, IAPMO listed cUPC, certified to NSF 61.
Mueller ProLine Full Port Ball Valve Genova 700 Solvent Weld Dwv Pipe Reducing Wye Mueller ProLine In-Line Check Valve
-20 to 300 degrees F temperature range, full port, packing gland, PTFE seat and packing, chrome-plated ball and stem, CSA certified to ASME B16.33 (5G) and B16.44 (125G), CR91-002 (1/2, 2, & 5 psig), UL gas shutoff valve (YRPV), UL manual valves (MHKZ), UL compressed gas shutoff valve (YQNZ), UL flammable liquid shutoff valve (YRBX), UL LP-gas shutoff valve (YSDT), FM approved, threaded ends comply with ANSI B1.20.1, IAMPO listed to cUPC, certified to NSF 61-G. Used when connecting a reducing branch line into a horizontal drain pipe. Also, can be used in conjunction with a Twist-Lok plug to provide a cleanout in a drain pipe. Fits both schedule 40 and 80 pipes, spring-loaded poppet, stainless steel spring, O-ring seal, solvent ends comply with ASTM D2466. Not for use with compressed air.
Mueller ProLine Full Port Ball Valve Mueller ProLine Compact Pattern Standard Port Gate Valve Genova 400 Solvent Weld Sewer and Drain Pipe Coupling
Full port, PTFE seat and packing, padking gland, chrome-plated brass ball and stem, PEX to copper threaded connection, pipe threads comply with ANSI B1.20.1, PEX connections comply with ASTM F-1807, IAPMO listed to cUPC, certified to NSF 61-G. Standard port, non-rising stem, six-point cast-iron handle, brass wedge disk, threaded ends comply with ANSI B1.20.1, certified to NSF 61. Used to join straight lengths of pipe for sewer lines, septic tank and seepage systems. 3" meets or exceeds ASTM D2949 or exceeds ASTM D2729; 4" and 6" meet ASTM D3034.
Genova 700 Combination Solvent Weld Pipe Reducing Tee/Wye Mueller ProLine Compact Pattern Standard Port Gate Valve Genova Products 71142 PVC-DWV Reducing Sanitary Tee
Required in some plumbing code areas to connect a branch line into a vertical drain pipe (stack) instead of a conventional tee fitting. Also used to connect a horizontal branch pipe approaching a horizontal drain pipe on the perpendicular. Standard port, non-rising stem, six-point cast-iron handle, brass wedge disk, solder ends comply with ANSI B16.18, certified to NSF 61. Used when connecting a branch line into a vertical drain pipe (stack).
Mueller ProLine Full Port Ball Valve VALVE CHCK ABS 1-1/4 RUB BOOT Mueller ProLine Full Port Gate Valve
400 PSI WOG, 160 PSI at 73DegF, full port, packing gland, PTFE seat and packing, chrome-plated brass ball and stem, ideal for use in potable water and radiant heating applications, PEX connections comply with ASTM F-1807, IAPMO listd to cUPC, certified to NSF 61-G. Rubber boot inlet and outlet. Full flow design, weighted flapper valve Full port, non-rising stem, screw over bonnet, five-point cast-iron handle, solid wedge disk, meets MSS SP-80, type1, class 150 lb. specification, solder ends comply with ANSI B16.18, certified to NSF 61-G.
Mueller ProLine Full Port Ball Valve NDS ProGuard Gate Valve NDS ProGuard Gate Valve
-40 to 194 degrees F temperature range, full port, packing gland, PTFE seat and packing, chrome-plated brass ball and stem, CSA certified to 1/2 psig, CSA certified to ASME B16.33(5G), B16.44 (125G), threaded ends comply with ANSI B1.20.1, IAMPO IGC 157 certified, IAPMO listed cUPC, certified to NSF 61. PVC construction. Gray color body with red handle. EPDM O-rings. Complies with all applicable ASTM and ANSI standards. PVC construction. Gray color body with red handle. EPDM O-rings. Complies with all applicable ASTM and ANSI standards.
Genova 700 Solvent Weld Dwv Pipe Wye Mueller ProLine Quarter Turn Solvent Ball Valve VALVE CHCK ABS 1-1/2 RUB BOOT
Used when connecting a branch line into a horizontal drain pipe. Also can be used in conjunction with a Twist-Lok plug to provide a cleanout in a drain pipe. For use with cold-water applications, TPV seats, NBR O-rings, fits both schedule 40 and 80 pipes, solvent ends comply with ASTM D2466, certified to NSF 61-G. Rubber boot inlet and outlet. Full flow design, weighted flapper valve
SC150SRS Sump Check Valve SC125SRS Sump Check Valve Genova Products 71143 PVC-DWV Reducing Sanitary Tee
Durable sonic welded thermo-plastic body. Durable sonic welded thermo-plastic body. Used when connecting a branch line into a vertical drain pipe (stack).
Genova 71441 PVC-DWV Fitting Mueller ProLine Quarter Turn Ball Valve B & K 103-023 Hose Bibb
Used in conjunction with a threaded plug to provide a cleanout opening. Teflon thread tape is recommended for threaded joints. For used with cold water applications,TPV seats NBR O-rings, fits both schedule 40 and 80 pipes, threaded ends comply with ANSI B1.20.1, certified to NSF 61-G. 200 PSI water, oil or gas. 1/4-turn operation. Large flow rate. Chrome plated brass ball. 3/4" hose outlet. Pipe thread complies with ANSI B1.20.1. Hose threads comply with ANSI B1.20.7. UPC coded bulk.
VALVE BALL 1-1/2IN S80 SOLVENT VALVE CHECK UNIV 1-1/4AND1-1/2 Genova 79240 Dwv Floor Strainer
Rated for 150 PSI at 73 Deg. F. For use with cold water applications, certified to NSF61-G, PTFE seats, EPDM O-rings. Includes one universal check valve and two adapters. Made from durable ABS plastic. High quality NItril-Bruna N seal. Fits all: 1-1/4 & 1-1/2 MPT & FPT. Prevents debris from entering a drain opening on the floor. Fits flush into any fitting hub flush to the floor.
Mueller ProLine Full Port Ball Valve Mueller ProLine Swing Check Valve Mueller ProLine Full Port Ball Valve
Full port, packing gland, PTFE seat and packing, chrome-plated brass ball and stem, 316 stainless steel grip ring, complies with ASSE 1061, certified to NSF 61-G, IAMPO listed to cUPC, PEX stiffeners included. Certified to NSF 61 requirements. 200 PSI WOG, -20 to 300 degrees F temperature range, full port, PTFE seat and packing, chrome plated brass ball and stem, suitable for vacuum use up to 7 PSIA, IAPMO listed to CUPC,  certified to NSF 61-G.
Mueller ProLine Full Port Ball Valve Apollo APXV3434 Quarter Turn Ball Valve Genova 700 Dwv Double Sanitary Tee
-40 to 194 degrees F temperature range, full port, packing gland, PTFE seat and packing, chrome-plated brass ball and stem, solder ends comply with ANSI B16.18, IAMPO IGC 157 certified, IAPMO listed to cUPC, certified to NSF 61-G. Apollo Ball Valve, Quarter Turn, Series: APXV3434, 3/4 in, 32 - 180 deg F, Crimpex End Connection, Brass Body, NSF Approved, ASTM F1807 Used to bring two branch lines into a vertical drain pipe (stack).
NDS flo Control 1011 Reinforced Poppet Check Valve NDS flo Control 1001 Reinforced Poppet Check Valve NDS ProGuard Gate Valve
Made of High-Impact PVC type II material. 1/2 pound spring gives positive seal with no back pressure. Reinforced Poppet.. Designed for any system where back flow is not desired. Spas, swimming pools, industrial and irrigation. Complies with all applicable ASTM and ANSI standards. KC-1500-S and KC-2000-S are UL recognized spa component. Made of High-Impact PVC type II material. 1/2 pound spring gives positive seal with no back  pressure. Reinforced Poppet. Designed for any system where back flow is not desired. Spas, swimming pools, industrial and irrigation. Complies with all applicable ASTM and ANSI standards. PVC construction. Gray color body with red handle. EPDM O-rings. Complies with all applicable ASTM and ANSI standards.
NDS ProGuard Gate Valve NDS EBV-1500-S 1-Piece Economy Full Port In-Line Ball Valve NDS EBV-1500-T 1-Piece Economy Full Port In-Line Ball Valve
PVC construction. Gray color body with red handle. EPDM O-rings. Complies with all applicable ASTM and ANSI standards. Low profile and compact economy design. PVC construction. 150 PSI rated at 730. (Not for use with compressed air). Solid Teflon seats. Large flow opening. White color. NSF standard listed. Low profile and compact economy design. PVC construction. 150 PSI rated at 730. (Not for use with compressed air). Solid Teflon seats. Large flow opening. White color. NSF standard listed.
Mueller ProLine Full Port Gate Valve Mueller ProLine Full Port Ball Valve Wayne 66005-WYN Check Valve
Full port, non-rising stem, screw over bonnet, five-point cast-iron handle, solid wedge disk, meets MSS SP-80, type 1, class 150 lb. specifications, threaded ends comply with ANSI B1.20.1, certified to NSF 61. -20 to 300 degrees F temperature range, full port, packing gland, PTFE seat and packing, chrome-plated brass ball and stem, solder ends comply with ANSI B16.18, IAPMO listed to cUPC, certified to NSF 61-G. 1-1/2" pump thread with 1-1/4" or 1-1/2" pipe connection.
Mueller ProLine Compact Pattern Standard Port Gate Valve Arrowhead 301 Standard Hose Bibb Arrowhead 253 No-Kink Hose Bibb
Standard port, non-rising stem, six-point cast-iron handle, brass wedge disk, threaded ends comply with ANSI B1.20.1, certified to NSF 61. Features heavy pattern rough brass, 1-piece O-ring bonnet, and coated tee handle. Straight short shank. Features heavy pattern rough brass, 1-piece O-ring bonnet, and coated tee handle.
Arrowhead 302 Standard Hose Bibb Arrowhead 353 No-Kink Hose Bibb Arrowhead 351 No-Kink Hose Bibb
Features heavy pattern rough brass, 1-piece O-ring bonnet, and coated tee handle. Straight short shank. Features heavy pattern rough brass, 1-piece O-ring bonnet, and coated tee handle. Features heavy pattern rough brass, 1-piece O-ring bonnet, and coated tee handle.
Mueller ProLine Full Port Ball Valve Genova 700 Solvent Weld Dwv Pipe Double Wye Mueller ProLine In-Line Check Valve
400 PSI WOG, 160 PSI at 73DegF, full port, packing gland, PTFE seat and packing, chrome-plated brass ball and stem, ideal for use in potable water and radiant heating applications, PEX connections comply with ASTM F-1807, IAPMO listd to cUPC, certified to NSF 61-G. Used to bring two branch lines into a horizontal drain pipe in drain-waste-vent applications. Fits both schedule 40 and 80 pipes, spring-loaded poppet, stainless steel spring, O-ring seal, solvent ends comply with ASTM D2466. Not for use with compressed air.
Genova 700 Combination Solvent Weld Pipe Reducing Tee/Wye Genova 700 Combination Solvent Weld Pipe Reducing Tee/Wye Genova Products 71633 PVC-DWV Cleanout Tee
Required in some plumbing code areas to connect a branch line into a vertical drain pipe (stack) instead of a conventional tee fitting. Also used to connect a horizontal branch pipe approaching a horizontal drain pipe on the perpendicular. Required in some plumbing code areas to connect a branch line into a vertical drain pipe (stack) instead of a conventional tee fitting. Also used to connect a horizontal branch pipe approaching a horizontal drain pipe on the perpendicular. Used with a vertical pipe stack to provide for above ground level access to piping.
Mueller ProLine Full Port Ball Valve Genova 41540 PVC Sewer & Drain Fitting Genova 700 Combination Solvent Weld Pipe Tee/Wye
-20 to 300 degrees F temperature range, full port, packing gland, PTFE seat and packing, chrome-plated ball and stem, CSA certified to ASME B16.33 (5G) and B16.44 (125G), CR91-002 (1/2, 2, & 5 psig), UL gas shutoff valve (YRPV), UL manual valves (MHKZ), UL compressed gas shutoff valve (YQNZ), UL flammable liquid shutoff valve (YRBX), UL LP-gas shutoff valve (YSDT), FM approved, threaded ends comply with ANSI B1.20.1, IAMPO listed to cUPC, certified to NSF 61-G. Used to increase or reduce pipe sizes. Required in some plumbing code areas to connect a branch line into vertical drain pipe instead of conventional tee fitting. Also used to connect a horizontal branch pipe approaching a horizontal drain pipe on the perpendicular. (Can be made from a wye and a street eighth bend.)
B & K 103-024 Hose Bibb Sta-Rite Industries FP0026-10 Flotec Genova 700 Solvent Weld Dwv Pipe Reducing Wye
200 PSI water, oil or gas. 1/4-turn operation. Large flow rate. Chrome plated brass ball. 3/4" hose outlet. Pipe thread complies with ANSI B1.20.1. Hose threads comply with ANSI B1.20.7. UPC coded bulk. Prevents water backflow into sump basin.  Accept 1-1/4" or 1-1/2" discharge lines.  Corrosion-resistant construction.  Non-threaded, in-line check valve with rubber sleeve and hose clamps. Used when connecting a reducing branch line into a horizontal drain pipe. Also, can be used in conjunction with a Twist-Lok plug to provide a cleanout in a drain pipe.
Mueller ProLine Standard Port Gate Valve Mueller ProLine Full Port Gate Valve Genova 77031 PVC-DWV Fitting
Non-rising stem, six-point cast-iron handle, compression ends for solderless connection to copper tubing, certified to NSF 61. Full port, non-rising stem, screw over bonnet, five-point cast-iron handle, solid wedge disk, meets MSS SP-80, type1, class 150 lb. specification, solder ends comply with ANSI B16.18, certified to NSF 61-G. Provides for the connection of 1-1/2" or 2" vent or branch waste piping to a vertical pipe as well as receiving the discharge of a water closet. The inlets are constructed to accept a 2" fitting hub over their outside diameter or an 1-1/2" pipe into their inside diameter.
NDS ProGuard Gate Valve NDS flo Control 1011 Reinforced Poppet Check Valve NDS flo Control 1001 Reinforced Poppet Check Valve
PVC construction. Gray color body with red handle. EPDM O-rings. Complies with all applicable ASTM and ANSI standards. Made of High-Impact PVC type II material. 1/2 pound spring gives positive seal with no back pressure. Reinforced Poppet.. Designed for any system where back flow is not desired. Spas, swimming pools, industrial and irrigation. Complies with all applicable ASTM and ANSI standards. KC-1500-S and KC-2000-S are UL recognized spa component. Made of High-Impact PVC type II material. 1/2 pound spring gives positive seal with no back  pressure. Reinforced Poppet. Designed for any system where back flow is not desired. Spas, swimming pools, industrial and irrigation. Complies with all applicable ASTM and ANSI standards.
NDS ProGuard Gate Valve Wayne 57028-001 Check Valve Kit With Rubber Boot and Metal Collars Genova 420 Street Pipe Elbow
PVC construction. Gray color body with red handle. EPDM O-rings. Complies with all applicable ASTM and ANSI standards. Includes: Two convertible fittings and four hose clamps. Durable thermoplastic valve body and poppet designed to resist corrosion and to stop noise. Handles either 1-1/4" or 1-1/2" OD pipe. Used to change direction in piping for sewer lines, septic tank and seepage systems. Sometimes called a street eighth bend. 3" meets ASTM D2949 or exceeds ASTM D2729; 4" and 6" meet ASTM D3034.
Genova 400 Pipe Elbow Mueller ProLine Swing Check Valve Genova 400 Pipe Elbow
Used to change direction in piping for sewer lines, septic tank and seepage systems. Sometimes called an eighth bend. Meets ASTM D3034. Certified to NSF 61 requirements. Used to change direction in piping for sewer lines, septic tank and seepage systems. Sometimes called a sixteenth bend. 3" meets ASTM D2949 or exceeds ASTM D2729.
Mueller ProLine Full Port Ball Valve Arrowhead 201 Shank-On Thread Hose Bibb Mueller ProLine Full Port Gate Valve
-40 to 194 degrees F temperature range, full port, packing gland, PTFE seat and packing, chrome-plated brass ball and stem, solder ends comply with ANSI B16.18, IAMPO IGC 157 certified, IAPMO listed to cUPC, certified to NSF 61-G. Features heavy pattern rough brass, 1-piece O-ring bonnet, and coated tee handle. Straight on taper. Full port, non-rising stem, screw over bonnet, five-point cast-iron handle, solid wedge disk, meets MSS SP-80, type 1, class 150 lb. specifications, threaded ends comply with ANSI B1.20.1, certified to NSF 61.
Mueller ProLine Full Port Ball Valve Arrowhead 202 Shank-On Thread Standard Hose Bibb NDS flo Control 1011 Reinforced Poppet Check Valve
Full port, packing gland, PTFE seat and packing, chrome-plated brass ball and stem, 316 stainless steel grip ring, complies with ASSE 1061, certified to NSF 61-G, IAMPO listed to cUPC, PEX stiffeners included. Features heavy pattern rough brass, 1-piece O-ring bonnet, and coated tee handle. Straight on taper. Made of High-Impact PVC type II material. 1/2 pound spring gives positive seal with no back pressure. Reinforced Poppet.. Designed for any system where back flow is not desired. Spas, swimming pools, industrial and irrigation. Complies with all applicable ASTM and ANSI standards. KC-1500-S and KC-2000-S are UL recognized spa component.
NDS flo Control 1001 Reinforced Poppet Check Valve NDS EBV-2000-S 1-Piece Economy Full Port In-Line Ball Valve NDS EBV-2000-T 1-Piece Economy Full Port In-Line Ball Valve
Made of High-Impact PVC type II material. 1/2 pound spring gives positive seal with no back  pressure. Reinforced Poppet. Designed for any system where back flow is not desired. Spas, swimming pools, industrial and irrigation. Complies with all applicable ASTM and ANSI standards. Low profile and compact economy design. PVC construction. 150 PSI rated at 730. (Not for use with compressed air). Solid Teflon seats. Large flow opening. White color. NSF standard listed. Low profile and compact economy design. PVC construction. 150 PSI rated at 730. (Not for use with compressed air). Solid Teflon seats. Large flow opening. White color. NSF standard listed.
Genova 400 Solvent Weld Sewer and Drain Pipe Adapter Coupling SharkBite 22222-0000LF 1-Piece Full Port In-Line Ball Valve VALVE BALL SHARKBITE BRS 1/2IN
Used to join straight lengths of pipe for sewer lines, septic tank and seepage systems. High quality forged brass ball valve with SharkBite connections. The SharkBite connections allow the user to connect the ball valves to copper tubing, CPVC, and PEX in seconds. Convenient single lever control makes it easy to use and encourages shut-off of water supply. Instant push-fit connections for increased ease of use - no soldering, clamps, unions, or glue required. Maximum Pressure: 200 PSI. Maximum Temperature: 200 degrees F (water). High quality forged brass ball valve with SharkBite connections. The SharkBite connections allow the user to connect the ball valves to copper tubing, CPVC, and PEX in seconds. Convenient single lever control makes it easy to use and encourages shut-off of water supply. Instant push-fit connections for increased ease of use - no soldering, clamps, unions, or glue required. Maximum Pressure: 200 PSI. Maximum Temperature: 200 degrees F (water).
Mueller ProLine Full Port Ball Valve Mueller ProLine Compact Pattern Standard Port Gate Valve NDS WSU-1520-S Full Port Pool Diverter Single Union Ball Valve
-20 to 300 degrees F temperature range, full port, packing gland, PTFE seat and packing, chrome-plated brass ball and stem, solder ends comply with ANSI B16.18, IAPMO listed to cUPC, certified to NSF 61-G. Standard port, non-rising stem, six-point cast-iron handle, brass wedge disk, threaded ends comply with ANSI B1.20.1, certified to NSF 61. Full port design, preset at 5 psi or 12 feet of head and can be adjusted to 14 psi or 32 feet of head, combination of 1-1/2" socket and 2" spigot on each end can be used on both sizes of pipe, single union design for easy serviceability, EPDM o-ring, meets/exceeds ASTM & Ansi STANDARDS. Bulk.
Genova Products 71644 PVC-DWV Cleanout Tee Genova 400 Short Turn Pipe Elbow Sharkbite U2008-0000LFA Straight Check Valve
Used with a vertical pipe stack to provide for above ground level access to piping. Used to change direction in piping for sewer lines, septic tank and seepage systems. Sometimes called a short turn quarter bend. 4" and 6" meet ASTM D3034. General purpose spring check valve that prevents the reverse flow of water. Can be installed horizontally and vertically and can be connected in seconds to copper tubing, CTS, CPVC, and Pex. Instant push-fit connections for increase ease of use - no soldering, clamps, unions, or glue required. Maximum Pressure: 200 PSI. Maximum Temperature: 150 degrees F (65 degrees C) (water).
Genova 73542 PVC-DWV Fitting Genova 700 Dwv Double Sanitary Tee NDS ProGuard Gate Valve
Used to bring two reducing branch lines into a vertical drain pipe (stack). Used to bring two branch lines into a vertical drain pipe (stack). PVC construction. Gray color body with red handle. EPDM O-rings. Complies with all applicable ASTM and ANSI standards.
NDS ProGuard Gate Valve Mueller ProLine Full Port Ball Valve Genova 400 Drain Pipe Adapter
PVC construction. Gray color body with red handle. EPDM O-rings. Complies with all applicable ASTM and ANSI standards. 200 PSI WOG, -20 to 300 degrees F temperature range, full port, PTFE seat and packing, chrome plated brass ball and stem, suitable for vacuum use up to 7 PSIA, IAPMO listed to CUPC,  certified to NSF 61-G. Adapts sewer pipe to standard male pipe threads for sewer lines, septic tank and seepage systems. Meets ASTM D3034.