Home > PLUMBING > ROUGH PLUMBING SUPPLIES > VALVES > NEEDLE VALVES
Choose a sub category:
PVC-S&D COUPLINGS PVC-S&D CAPS PVC-S&D ADAPTERS
PVC-S&D BUSHINGS PVC-S&D ELBOWS PVC-S&D TEES & WYES
PVC-S&D CLEANOUTS & PLUGS PVC-S&D STRAINERS
Sort By:
1
Genova Products 72815 PVC-DWV 90 Deg Sanitary Elbow Genova Products 73615 PVC-DWV 45 Degree Sanitary Elbow Genova Products 70615 PVC-DWV 45 Degree Elbow
Used to change direction in piping in drain-waste-vent applications. Sometimes called a quarter bend. Used to change direction in piping in drain-waste-vent applications. Sometimes called an eighth bend. Used to change direction in piping in drain-waste-vent applications. Sometimes called an eighth bend.
Genova 700 Solvent Weld Dwv Pipe Plug Genova Products 72820 PVC-DWV 90 Degree Sanitary Elbow Genova Products 73620 PVC-DWV 45 Degree Sanitary Elbow
Used to form a removable closure. These threaded plugs offer a corrosion proof alternative to metal plugs. Teflon thread tape is recommended for threaded joints. Used to change direction in piping in drain-waste-vent applications. Sometimes called a quarter bend. Used to change direction in piping in drain-waste-vent applications. Sometimes called an eighth bend.
Genova Products 72715 PVC-DWV 45 Degree Street Elbow Genova 700 Solvent Weld Dwv Pipe Plug Genova Products 70620 PVC-DWV 45 Degree Elbow
Used to change direction from a fitting hub to a pipe in drain-waste-vent applications. Sometimes called a street eighth bend. Used to form a removable closure. These threaded plugs offer a corrosion proof alternative to metal plugs. Teflon thread tape is recommended for threaded joints. Used to change direction in piping in drain-waste-vent applications. Sometimes called an eighth bend.
Genova Products 72720 PVC-DWV 45 Degree Street Elbow Genova 72716 PVC-DWV Fitting Genova Products 71614 PVC-DWV Cleanout Adapter
Used to change direction from a fitting hub to a pipe in drain-waste-vent applications. Sometimes called a street eighth bend. Used to change direction from a fitting hub to a pipe in drain-waste-vent applications. Sometimes called a street eighth bend. Solvent welds into fitting hub and adapts to male threaded plug. Component part of Fitting Cleanout with Threaded Plug. Teflon thread tape is recommended for threaded joints.
Genova Products 72916 PVC-DWV 90 Degree Sanitary Elbow Genova Products 70815 PVC-DWV 22-1/2 Degree Elbow Genova 71619 PVC-DWV Fitting
Used to change direction in piping in drain-waste-vent applications. Sometimes called a street quarter bend. Used to change direction in piping in drain-waste-vent applications. Sometimes called a sixteenth bend. Solvent welds into fitting hub and adapts to male threaded plug. Component part of Fitting Cleanout with Threaded Plug. Teflon thread tape is recommended for threaded joints.
Genova Products 70715 PVC-DWV 90 Degree Elbow Genova Products 72926 PVC-DWV  90 Deg Street Elbow Genova 700 Solvent Weld Dwv Pipe Plug
Used to change direction in the dry portion of vent piping where water flow is not a consideration. Sometimes called a short turn quarter bend. Used to change direction in piping in drain-waste-vent applications. Sometimes called a street quarter bend. Used to form a removable closure. These threaded plugs offer a corrosion proof alternative to metal plugs. Teflon thread tape is recommended for threaded joints.
Genova 70915 PVC-DWV Fitting Genova Products 71615 PVC-DWV Cleanout Body Genova 72920 PVC-DWV Fitting
Used to change direction in piping in drain-waste-vent applications. Sometimes called a sixth bend. Solvent welds into fitting hub to provide access to piping. Teflon thread tape is recommended for threaded joints. Used to change direction in dry portion of vent piping where water flow is not a consideration. Also called a "short turn street quarter bend".
Genova Products 70820 PVC-DWV 22-1/2 Degree Elbow Genova Products 70720 PVC-DWV 90 Degree Elbow Mueller ProLine Quarter Turn Solvent Ball Valve
Used to change direction in piping in drain-waste-vent applications. Sometimes called a sixteenth bend. Used to change direction in the dry portion of vent piping where water flow is not a consideration. Sometimes called a short turn quarter bend. For use with cold-water applications, TPV seats, NBR O-rings, fits both schedule 40 and 80 pipes, solvent ends comply with ASTM D2466, certified to NSF 61-G.
Mueller ProLine Quarter Turn Ball Valve Genova Products 73815 PVC-DWV 90 Deg Long Sweep Elbow Genova Products 73820 PVC-DWV 90 Deg Long Sweep Elbow
For used with cold water applications,TPV seats NBR O-rings, fits both schedule 40 and 80 pipes, threaded ends comply with ANSI B1.20.1, certified to NSF 61-G. Used to change direction in piping in drain-waste-vent applications. Sometimes called a long turn quarter bend. Used to change direction in piping in drain-waste-vent applications. Sometimes called a long turn quarter bend.
Genova 70920 PVC-DWV Fitting Genova Products 71620 PVC-DWV Cleanout Body with Plug Genova Products 70630 PVC-DWV 45 Degree Elbow
Used to change direction in piping in drain-waste-vent applications. Sometimes called a sixth bend. Solvent welds into fitting hub to provide access to piping. Teflon thread tape is recommended for threaded joints. Used to change direction in piping in drain-waste-vent applications. Sometimes called an eighth bend.
Genova Products 72830 PVC-DWV 90 Degree Sanitary Elbow Genova 700 Solvent Weld Dwv Pipe Plug Genova Products 72730 PVC-DWV 45 Degree Street Elbow
Used to change direction in piping in drain-waste-vent applications. Sometimes called a quarter bend. Used to form a removable closure. These threaded plugs offer a corrosion proof alternative to metal plugs. Teflon thread tape is recommended for threaded joints. Used to change direction from a fitting hub to a pipe in drain-waste-vent applications. Sometimes called a street eighth bend.
NDS EBV-0500-S 1-Piece Economy Full Port In-Line Ball Valve NDS EBV-0500-T 1-Piece Economy Full Port In-Line Ball Valve Genova 700 Solvent Weld Toe Saver Floor Plug
Low profile and compact economy design. PVC construction. 150 PSI rated at 730. (Not for use with compressed air). Solid Teflon seats. Large flow opening. White color. NSF standard listed. Low profile and compact economy design. PVC construction. 150 PSI rated at 730. (Not for use with compressed air). Solid Teflon seats. Large flow opening. White color. NSF standard listed. For basement floor installation to eliminate tripping hazard posed by conventional raise head plugs. Interchanges with brass or plastic plugs. Teflon thread tape is recommended for threaded joints.
NDS EBV-0750-S 1-Piece Economy Full Port In-Line Ball Valve NDS EBV-0750-T 1-Piece Economy Full Port In-Line Ball Valve Mueller 107-634 Quarter Turn Solvent Ball Valve
Low profile and compact economy design. PVC construction. 150 PSI rated at 730. (Not for use with compressed air). Solid Teflon seats. Large flow opening. White color. NSF standard listed. Low profile and compact economy design. PVC construction. 150 PSI rated at 730. (Not for use with compressed air). Solid Teflon seats. Large flow opening. White color. NSF standard listed. For use with cold-water applications, TPV seats, NBR O-rings, fits both schedule 40 and 80 pipes, solvent ends comply with ASTM D2466, certified to NSF 61-G.
Mueller ProLine Quarter Turn Ball Valve Mueller ProLine Quarter Turn Ball Valve Genova 75815 PVC-DWV Fitting
For used with cold water applications,TPV seats NBR O-rings, fits both schedule 40 and 80 pipes, threaded ends comply with ANSI B1.20.1, certified to NSF 61-G. For use with hot or cold water applications, PTFE seats, EPDM O-rings, solvent ends comply with ASTM D2466, certified to NSF 61-G. Used to change direction in piping. Also called a street sixteenth bend.
Genova 700 Solvent Weld Toe Saver Floor Plug Mueller ProLine Quarter Turn Ball Valve Genova Products 71629 PVC-DWV Cleanout Adapter
For basement floor installation to eliminate tripping hazard posed by conventional raise head plugs. Interchanges with brass or plastic plugs. Teflon thread tape is recommended for threaded joints. Rated for 150 PSI at 73 Deg. F., for use with cold-water applications, gray color, PTFE seats, EPDM O-rings. Threaded ends comply with ANSI B1.20.1. Certified to NSF 61-G. Lead-free compliant. Solvent welds into fitting hub and adapts to male threaded plug. Component part of Fitting Cleanout with Threaded Plug. Teflon thread tape is recommended for threaded joints.
Genova Twist-Lok 700 Solvent Weld Dwv Pipe Plug Genova 75820 PVC-DWV Fitting Mueller 107-342NL Full Port Ball Valve
Genova system feature that provides an easily removable closure at a Genova fitting hub. Used to change direction in piping. Also called a street sixteenth bend. 400 PSI WOG, 160 PSI at 73DegF, full port, packing gland, PTFE seat and packing, chrome-plated brass ball and stem, ideal for use in potable water and radiant heating applications, PEX connections comply with ASTM F-1807, IAPMO listd to cUPC, certified to NSF 61-G.
Plumb Pak PP20062LF 1/4 Turn Straight Shut-Off Valve Genova Products 70640 PVC-DWV 45 Degree Elbow Genova Products 70830 PVC-DWV 22-1/2 Degree Elbow
Plumb Pak Straight Shut-Off Valve, 1/4 Turn, 1/2 X 3/8 in Nominal, Copper Sweat X OD End, Brass Body, Chrome Plated Used to change direction in piping in drain-waste-vent applications. Sometimes called an eighth bend. Used to change direction in piping in drain-waste-vent applications. Sometimes called a sixteenth bend.
Genova Products 72840 PVC-DWV  90 Deg Sanitary Elbow Plumb Pak PP20050LF 1/4 Turn Angle Shut-Off Valve Plumb Pak PP20052LF Quarter Turn Straight Stop Valve
Used to change direction in piping in drain-waste-vent applications. Sometimes called a quarter bend. Chrome. Chrome.
Genova Products 72834 PVC-DWV Closet Bend Genova Products 71630 PVC-DWV Cleanout Body with Plug Genova Products 72936 PVC-DWV  90 Deg Street Elbow
Used to change direction in piping as well as size. Usually utilized to convert from 3" horizontal pipe to 4" vertical pipe directly under the toilet. Solvent welds into fitting hub to provide access to piping. Teflon thread tape is recommended for threaded joints. Used to change direction in piping in drain-waste-vent applications. Sometimes called a street quarter bend.
Mueller ProLine Quarter Turn Ball Valve Plumb Pak PP20060LF Quarter Turn Angle Stop Valve Plumb Pak PP20051LF 1/4 Turn Angle Shut-Off Valve
For use with hot or cold water applications, PTFE seats, EPDM O-rings, solvent ends comply with ASTM D2466, certified to NSF 61-G. Chrome Chrome.
NDS EBV-1000-T 1-Piece Economy Full Port In-Line Ball Valve NDS EBV-1000-S 1-Piece Economy Full Port In-Line Ball Valve Plumb Pak PP20053LF 1/4 Turn Straight Shut-Off Valve
Low profile and compact economy design. PVC construction. 150 PSI rated at 730. (Not for use with compressed air). Solid Teflon seats. Large flow opening. White color. NSF standard listed. Low profile and compact economy design. PVC construction. 150 PSI rated at 730. (Not for use with compressed air). Solid Teflon seats. Large flow opening. White color. NSF standard listed. Chrome.
Genova Twist-Lok 700 Solvent Weld Dwv Pipe Plug B and K 191-432HC Water Supply Line Valves B and K 191-222HC Water Supply Line Valves
Genova system feature that provides an easily removable closure at a Genova fitting hub. B & K Industries Supply Line Valve, Straight, 1/2 x 3/8 in Nominal, Sweat x Compression End, 125 psi, Media: Water, Chrome-Plated Lead-Free Brass Body B & K Industries Supply Line Valve, Straight, 3/8 in Nominal, FIP x Compression End, 125 psi, Media: Water, Chrome-Plated Lead-Free Brass Body
Genova Products 71639 PVC-DWV Cleanout Adapter Genova Products 72740 PVC-DWV 45 Degree Street Elbow B&K Proline 1/4 Turn Angle Stop Valve
Solvent welds into fitting hub and adapts to male threaded plug. Component part of Fitting Cleanout with Threaded Plug. Teflon thread tape is recommended for threaded joints. Used to change direction from a fitting hub to a pipe in drain-waste-vent applications. Sometimes called a street eighth bend. B&K Angle Stop Valve, 1/4 Turn, Series: Proline, 1/2 X 3/8 in Nominal, Sweat X Compression End, 125 psi, Media: Water, Brass Body, 180 deg F, NSF Approved, cUPC Compliant, Chrome Plated, For Use With Water Supply shut-off Application
Plumb Pak PP20063LF 1/4 Turn Straight Shut-Off Valve B&K Proline 1/4 Turn Angle Angle Supply Line Valve Watts LF PBQTR-615 1/4 Turn Straight Stop Valve
5/8" O.D. (1/2" Nom. Copper) x 3/8" O.D. Chrome. B&K Angle Supply Line Valve, 1/4 Turn, Angle, Series: Proline, 1/2 X 3/8 in Nominal, FIP X Compression End, 125 psi, Media: Water, Brass Body Connects to existing valves. Solid ball valve design allows full open or close with a quarter turn and eliminates sticking problems. Brass stem. 1/4 turn on, 1/4 turn off. Chrome plated.
Mueller ProLine Quarter Turn Solvent Ball Valve Genova Products 73830 PVC-DWV 90 Deg Long Sweep Elbow Mueller ProLine Quarter Turn Ball Valve
For use with cold-water applications, TPV seats, NBR O-rings, fits both schedule 40 and 80 pipes, solvent ends comply with ASTM D2466, certified to NSF 61-G. Used to change direction in piping in drain-waste-vent applications. Sometimes called a long turn quarter bend. For used with cold water applications,TPV seats NBR O-rings, fits both schedule 40 and 80 pipes, threaded ends comply with ANSI B1.20.1, certified to NSF 61-G.
Plumb Pak PP20321LF 1/4 Turn Transitional Angle Supply Line Valve B K Industries 191-232HC Water Supply Line Valves Plumb Pak PP20322LF 1/4 Turn Transitional Straight Supply Line Valve
Angle. Chrome B & K Industries Supply Line Valve, Straight, 1/2 x 3/8 in Nominal, FIP x Compression End, 125 psi, Media: Water, Chrome-Plated Lead-Free Brass Body Straight, chrome.
Plumb Pak PP20061LF 1/4 Turn Angle Shut-Off Valve Mueller ProLine Quarter Turn Ball Valve Watts LF PBQT-090 1/4 Turn Angle Stop Valve
Plumb Pak Angle Shut-Off Valve, 1/4 Turn, 5/8 X 3/8 in Nominal, OD X OD End, Brass Body, Chrome Plated Rated for 150 PSI at 73 Deg. F., for use with cold-water applications, gray color, PTFE seats, EPDM O-rings. Threaded ends comply with ANSI B1.20.1. Certified to NSF 61-G. Lead-free compliant. Solid ball valve design. Brass stem. Water supply valve, 1/4 turn on and 1/4 turn off. Chrome. Bagged.
Watt P-672 Push Fit Straight Stop Valve Watt P-675 Push Fit Angle Stop Valve Apollo Valves APXVS1238C 1/4 Turn Straight Stop Valve
Works with copper, CPVC, Pex, LPDE, MPDE, HDPE and polybutylene tubing in hot and cold water applications. Incorporates stainless steel gripping teeth in the collets, allowing the connectors to interconnect with multiple materials without special tools or tube inserts. Exclusive O-ring guide insures zero-leak connections. Tube orientation can be changed by a simple twist, reducing the amount of tubing required to plumb a water system. Reusable, approved for use behind walls and underground. Works with copper, CPVC, Pex, LPDE, MPDE, HDPE and polybutylene tubing in hot and cold water applications. Incorporates stainless steel gripping teeth in the collets, allowing the connectors to interconnect with multiple materials without special tools or tube inserts. Exclusive O-ring guide insures zero-leak connections. Tube orientation can be changed by a simple twist, reducing the amount of tubing required to plumb a water system. Reusable, approved for use behind walls and underground. Apollo Valves Straight Stop Valve, 1/4 Turn, 1/2 X 3/8 in Nominal, Pex Barb X Comp End, Brass Body, 180 deg F, ASTM F1807, NSF Approved, For Use With Apollo Pex Pipe
Genova Products 70730 PVC-DWV 90 Degree Elbow Apollo Valves APXVA1238C 1/4 Turn Angle Stop Valve Watts LF PBQT-290 1/4 Turn Angle Stop Valve
Used to change direction in the dry portion of vent piping where water flow is not a consideration. Sometimes called a short turn quarter bend. Apollo Valves Angle Stop Valve, 1/4 Turn, 1/2 X 3/8 in Nominal, Pex Barb X Comp End, Brass Body, 180 deg F, ASTM F1807, NSF Approved, For Use With Apollo Pex Pipe Solid ball valve design. Brass stem. Water supply valve, 1/4 turn on and 1/4 turn off. Chrome plated. Bagged.
B&K Proline 1/4 Turn Angle Angle Supply Line Valve Watt P-676 Push Fit Angle Stop Valve Watts P-673 Quick Connect Straight Stop Valve
B&K Angle Supply Line Valve, 1/4 Turn, Angle, Series: Proline, 5/8 X 3/8 in Nominal, Compression End, 125 psi, Media: Water, Brass Body, 180 deg F, NSF Approved, cUPC Compliant, Chrome Plated Works with copper, CPVC, Pex, LPDE, MPDE, HDPE and polybutylene tubing in hot and cold water applications. Incorporates stainless steel gripping teeth in the collets, allowing the connectors to interconnect with multiple materials without special tools or tube inserts. Exclusive O-ring guide insures zero-leak connections. Tube orientation can be changed by a simple twist, reducing the amount of tubing required to plumb a water system. Reusable, approved for use behind walls and underground. Quick Connect connectors are designed and manufactured for many years of trouble free service. Produced of off-white Polysulfone, a high performance thermal plastic material, the design allows for quick and easy connections without the use of installation tools. NSF-61, NSF-14, CSA B137.5, ASTM F877, UPC, and ASSE 1061 approved. Polybagged.
Mueller ProLine Full Port Ball Valve VALVE GARDHOSE 1/2PEX X 3/4MH Mueller ProLine Quarter Turn Solvent Ball Valve
400 PSI WOG, 160 PSI at 73DegF, full port, packing gland, PTFE seat and packing, chrome-plated brass ball and stem, ideal for use in potable water and radiant heating applications, PEX connections comply with ASTM F-1807, IAPMO listd to cUPC, certified to NSF 61-G. For use with cold-water applications, TPV seats, NBR O-rings, fits both schedule 40 and 80 pipes, solvent ends comply with ASTM D2466, certified to NSF 61-G.
Mueller ProLine Quarter Turn Ball Valve B and K Industries 191-032HC Water Valve Watts P-671 Quick Connect Straight Stop Valve
For used with cold water applications,TPV seats NBR O-rings, fits both schedule 40 and 80 pipes, threaded ends comply with ANSI B1.20.1, certified to NSF 61-G. B & K Industries Supply Line Valve, Straight, 5/8 x 3/8 in Nominal, Compression End, 125 psi, Media: Water, Chrome-Plated Lead-Free Brass Body Works with copper, CPVC, PEX, LPDE, MPDE, HDPE and polybutylene tubing in hot and cold water applications. Incorporates stainless steel gripping teeth in the collets, allowing the connectors to interconnect with multiple materials without special tools or tube inserts. Exclusive O-ring guide insures zero-leak connections. Tube orientation can be changed by a simple twist, reducing the amount of tubing required to plumb a water system. Reusable, approved for use behind walls and underground. 1/2" x 1/4" OD.
Genova Products 70930 PVC-DWV 60 Degree Elbow Plumb Pak PP20064LF Quarter Turn Straight Stop Valve Genova Twist-Lok 700 Solvent Weld Dwv Pipe Plug
Used to change direction in piping in drain-waste-vent applications. Sometimes called a sixth bend. Chrome plated. Genova system feature that provides an easily removable closure at a Genova fitting hub.
Mueller ProLine Full Port Ball Valve Genova Products 70840 PVC-DWV 22-1/2 Degree Elbow Plumb Pak PP25502LF Saddle Valve
-20 to 300 degrees F temperature range, full port, packing gland, PTFE seat and packing, chrome-plated ball and stem, CSA certified to ASME B16.33 (5G) and B16.44 (125G), CR91-002 (1/2, 2, & 5 psig), UL gas shutoff valve (YRPV), UL manual valves (MHKZ), UL compressed gas shutoff valve (YQNZ), UL flammable liquid shutoff valve (YRBX), UL LP-gas shutoff valve (YSDT), FM approved, threaded ends comply with ANSI B1.20.1, IAMPO listed to cUPC, certified to NSF 61-G. Used to change direction in piping in drain-waste-vent applications. Sometimes called a sixteenth bend. 1/4 O.D. Tube outlet for 3/8''- 3/4'' O.D. tubing or iron pipe.
Watt P-677 Push Fit Angle Stop Valve Mueller ProLine Full Port Ball Valve Mueller ProLine Quarter Turn Ball Valve
Quick Connect connectors are designed and manufactured for many years of trouble free service. Produced of off-white Polysulfone, a high performance thermal plastic material, the design allows for quick and easy connections without the use of installation tools. NSF-61, NSF-14, CSA B137.5, ASTM F877, UPC, and ASSE 1061 approved. Polybagged. -20 to 300 degrees F temperature range, full port, packing gland, PTFE seat and packing, chrome-plated ball and stem, CSA certified to ASME B16.33 (5G) and B16.44 (125G), CR91-002 (1/2, 2, & 5 psig), UL gas shutoff valve (YRPV), UL manual valves (MHKZ), UL compressed gas shutoff valve (YQNZ), UL flammable liquid shutoff valve (YRBX), UL LP-gas shutoff valve (YSDT), FM approved, threaded ends comply with ANSI B1.20.1, IAMPO listed to cUPC, certified to NSF 61-G. For used with cold water applications,TPV seats NBR O-rings, fits both schedule 40 and 80 pipes, threaded ends comply with ANSI B1.20.1, certified to NSF 61-G.
Plumb Pak PP60PCLF Quarter Turn Angle Stop Valve Mueller ProLine Quarter Turn Solvent Ball Valve Mueller ProLine Compact Pattern Standard Port Gate Valve
Chrome For use with cold-water applications, TPV seats, NBR O-rings, fits both schedule 40 and 80 pipes, solvent ends comply with ASTM D2466, certified to NSF 61-G. Standard port, non-rising stem, six-point cast-iron handle, brass wedge disk, solder ends comply with ANSI B16.18, certified to NSF 61.
Genova Products 71640 PVC-DWV Cleanout Body with Plug Genova 700 Solvent Weld Dwv Pipe Plug Plumb Pak PP51PCLF 1/4 Turn Angle Shut-Off Valve
Solvent welds into fitting hub to provide access to piping. Teflon thread tape is recommended for threaded joints. Used to form a removable closure. These threaded plugs offer a corrosion proof alternative to metal plugs. Teflon thread tape is recommended for threaded joints. Quarter turn angle shut off valve. Chrome.
Plumb Pak PP50PCLF 1/4 Turn Angle Shut-Off Valve Plumb Pak PP46PCLF 1/4 Turn Angle Stop Valve Watt P-683 Push Fit Angle Stop Valve
Chrome. Carded. Quick Connect connectors are designed and manufactured for many years of trouble free service. Produced of off-white Polysulfone, a high performance thermal plastic material, the design allows for quick and easy connections without the use of installation tools. NSF-61, NSF-14, CSA B137.5, ASTM F877, UPC, and ASSE 1061 approved. Polybagged.
Mueller ProLine Full Port Ball Valve Plumb Pak PP53PCLF 1/4 Turn Straight Shut-Off Valve Mueller ProLine Quarter Turn Ball Valve
-40 to 194 degrees F temperature range, full port, packing gland, PTFE seat and packing, chrome-plated brass ball and stem, solder ends comply with ANSI B16.18, IAMPO IGC 157 certified, IAPMO listed to cUPC, certified to NSF 61-G. Chrome. For use with hot or cold water applications, PTFE seats, EPDM O-rings, solvent ends comply with ASTM D2466, certified to NSF 61-G.
Watt P-678 Push Fit Angle Stop Valve Plumb Pak PP63PCLF 1/4 Turn Straight Shut-Off Valve Mueller ProLine Compact Pattern Standard Port Gate Valve
Quick Connect connectors are designed and manufactured for many years of trouble free service. Produced of off-white Polysulfone, a high performance thermal plastic material, the design allows for quick and easy connections without the use of installation tools. NSF-61, NSF-14, CSA B137.5, ASTM F877, UPC, and ASSE 1061 approved. Polybagged. 5/8" O.D. (1/2" Nom. Copper) x 3/8" O.D. Chrome. Standard port, non-rising stem, six-point cast-iron handle, brass wedge disk, threaded ends comply with ANSI B1.20.1, certified to NSF 61.
VLV QTR TURN ANG 1/2X1/4IN    VLV QTR TURN STR 1/2X1/4      Plumb Pak PP61PCLF 1/4 Turn Angle Shut-Off Valve
Plumb Pak Angle Shut-Off Valve, 1/4 Turn, 1/2 X 3/8 in Nominal, Nominal Compression X OD End, Brass Body, Chrome Plated
Plumb Pak PP52PCLF 1/4 Turn Straight Shut-Off Valve Mueller ProLine Full Port Ball Valve Plumb Pak PP855-2LF Saddle Valve
Chrome. -20 to 300 degrees F temperature range, full port, packing gland, PTFE seat and packing, chrome-plated brass ball and stem, solder ends comply with ANSI B16.18, IAPMO listed to cUPC, certified to NSF 61-G. 1/4 O.D. Tube outlet for 3/8''- 3/4'' O.D. tubing or iron pipe.
Watts LF PBQTP-250 1/4 Turn Angle Stop Valve Watts LF PBQT-118 1/4 Turn 3-Way Angle Stop Valve Plumb Pak PP123PCLF 1/4 Turn Angle Shut-Off Valve
Solid ball valve design allows full open or close with a quarter turn and eliminates sticking problems. Brass stem. 1/4 turn on, 1/4 turn off. Chrome plated. Solid ball valve design allows full open or close with a quarter turn and eliminates sticking problems. Brass stem. 1/4 turn on, 1/4 turn off. Chrome plated. Angle, chrome
Apollo APXV1212 Quarter Turn Ball Valve Plumb Pak PP62PCLF 1/4 Turn Straight Shut-Off Valve PEX VALVE STOP COMPRSN 1/2X3/8
Apollo Ball Valve, Quarter Turn, Series: APXV1212, 1/2 in, 32 - 180 deg F, Crimpex End Connection, Brass Body, NSF Approved, ASTM F1807 Plumb Pak Straight Shut-Off Valve, 1/4 Turn, 1/2 X 3/8 in Nominal, Copper Sweat X OD End, Brass Body, Chrome Plated Made of PPSU (polysulfone). Works on all Brands of PEX Pipe. Install with pliers remove with screwdriver. No special crimp tool needed. cNSF-14,?cNSF-61, CSA compliant. Fittings and rings included in each bag. Temperature approvals 180 Deg. F at 100 P.S.I. Approved for behind the wall and underground applications. Patent Pending.
Plumb Pak PP53-1PCLF 1/4 Turn Straight Shut-Off Valve Watts LF PBQT-113 1/4 Turn 3-Way Angle Stop Valve Watts LF PBQT-213 1/4 Turn 3-Way Angle Stop Valve
Plumb Pak Straight Shut-Off Valve, 1/4 Turn, 1/2 X 1/2 in Nominal, FIP X OD End, Brass Body, Chrome Plated Solid ball valve design allows full open or close with a quarter turn and eliminates sticking problems. Brass stem. 1/4 turn on, 1/4 turn off. Chrome plated. Solid ball valve design allows full open or close with a quarter turn and eliminates sticking problems. Brass stem. 1/4 turn on, 1/4 turn off. Chrome plated.
Genova 53067 Washer Hose Valve Watts LF PBQT-218 1/4 Turn 3-Way Angle Stop Valve Genova 73131 PVC-DWV Fitting
Solvent welds directly to 1/2" CPVC tubing and adapts to female hose couplings. Most often used in conjunction with No.53056/530561 wing elbow to supply water to automatic washing machines. Bulk. Solid ball valve design allows full open or close with a quarter turn and eliminates sticking problems. Brass stem. 1/4 turn on, 1/4 turn off. Chrome plated. Used to connect a branch line or vent at a change of direction in a larger vertical or horizontal pipe. The inlet is constructed to accept a 2" fitting over its outside diameter or an 1?" pipe into its inside diameter.
Mueller ProLine Quarter Turn Ball Valve Anderson 7104SCSD Self-Tapping Saddle Valve Anderson 759103-0402 Angle Needle Shut-Off Valve
Rated for 150 PSI at 73 Deg. F., for use with cold-water applications, gray color, PTFE seats, EPDM O-rings. Threaded ends comply with ANSI B1.20.1. Certified to NSF 61-G. Lead-free compliant. For use with copper tubing. Can be installed while line is under pressure. Valve has 1/4" compression connection and clamp will fit 3/8" thru 1-3/8" O.D. copper tubing. Includes valve, saddle, nuts, screws and washer. PIERCE PIN SHOWN IN CLOSED POSITION. Bagged. Anderson Needle Shut-Off Valve, Angle, 1/4 X 1/8 in Nominal, Compression X Male Pipe End, Brass Body, Chrome Plated Finish
Pro Bite 190-932HC/LF953AR Water Valve Plumb Pak PP62-1PCLF 1/4 Turn Angle Shut-Off Valve Anderson 759106-04 Straight Needle Shut-Off Valve
Connects to copper, PEX or CPVC, no glue, soldering, crimping or special tools, approved for in-wall and underground burial, approved for potable water, radiant and hydronic heating, easily repositioned or removed. 5/8" O.D. (1/2" Nom. Copper) x 1/2" O.D. Anderson Needle Shut-Off Valve, Straight, 1/4 in Nominal, Compression X Compression End, Brass Body
Genova 75830 PVC-DWV Fitting Plumb Pak PP51-1PCLF 1/4 Turn Angle Shut-Off Valve Mueller ProLine Full Port Gate Valve
Used to change direction in piping. Also called a street sixteenth bend. Quarter turn angle shut off valve. Chrome. Full port, non-rising stem, six-point cast-iron handle, brass wedge disk, threaded ends comply with ANSI B1.20.1, certified to NSF 61.
Plumb Pak PP67PCLF 1/4 Turn Angle Shut-Off Valve Plumb Pak PP2068POLF Quarter Turn Straight Stop Valve Plumb Pak PP2071LF Quarter Turn Straight Stop Valve
5/8" O.D. (1/2" NOM. Copper) x 7/16" O.D. - 1/2" O.D. Carded. 5/8" O.D. Comp. X 3/8" O.D. Valve pushes on to PEX, CPVC or Copper, Double O-ring seal, safety clip, Use for tight spots, a shorter stub out, or finished wall/floor. Chrome plated.
Genova 70940 PVC-DWV Fitting Plumb Pak PP2622POLF 1/4 Turn Push-Fit Quick Lock Angle Stop Valve NDS EBV-1250-S 1-Piece Economy Full Port In-Line Ball Valve
Used to change direction in piping in drain-waste-vent applications. Sometimes called a sixth bend. 1/2. X 3/8" O.D. Valve pushes on to PEX, CPVC or Copper, Double O-ring seal, safety clip, Use for tight spots, a shorter stub out, or finished wall/floor. Low profile and compact economy design. PVC construction. 150 PSI rated at 730. (Not for use with compressed air). Solid Teflon seats. Large flow opening. White color. NSF standard listed.
NDS EBV-1250-T 1-Piece Economy Full Port In-Line Ball Valve Mueller ProLine Full Port Ball Valve Genova Products 72946 PVC-DWV  90 Deg Street Elbow
Low profile and compact economy design. PVC construction. 150 PSI rated at 730. (Not for use with compressed air). Solid Teflon seats. Large flow opening. White color. NSF standard listed. Nickel finish, full port, PTFE disc and seat, frost-proof stainless steel ball design, CSA ANSI Z 21.15 (1/2 PSIG), CSA certified to ASME B 16.33 (5G), CSA certified to ASME B16.44 (125G), UL gas shutoff valve (YRPV), UL manual valves (MHKZ), UL compressed gas shutoff valve (YQNZ), UL flammable liquid shutoff valve (YRBX), UL LP-Gas shutoff valve (YSDT), FM approved, comforms to MSS-SP-110, meets fed spec WW-V-35, Type II, Class A Style 3, threaded ends comply with ANSI B1.20.1, certified to NSF 61-G. Used to change direction in piping in drain-waste-vent applications. Sometimes called a street quarter bend.
Pro Bite 191-932HC/LF953SR Water Supply Line Valves Mueller ProLine Full Port Ball Valve Plumb Pak PP61-1PCLF 1/4 Turn Straight Shut-Off Valve
Mueller Push Fit Valve, Straight Pattern, 1/2 x 3/8 in Nominal, Push-Fit x Compression End, 200 psi, Media: Water, Brass Body, 200 Deg F, Standards: CSA Certified, NSF and cUPC Approved, Chrome Plated Finish, For Plumbing Applications -40 to 194 degrees F temperature range, full port, packing gland, PTFE seat and packing, chrome-plated brass ball and stem, CSA certified to 1/2 psig, CSA certified to ASME B16.33(5G), B16.44 (125G), threaded ends comply with ANSI B1.20.1, IAMPO IGC 157 certified, IAPMO listed cUPC, certified to NSF 61. Plumb Pak Straight Shut-Off Valve, 1/4 Turn, 1/2 X 1/2 in Nominal, Copper Sweat X OD End, Brass Body, Chrome Plated
BrassCraft G2CR19X CD 1/4 Turn Angle Stop Valve Watt P-681 Push Fit Supply Line Valve Mueller ProLine Full Port Ball Valve
BrassCraft Angle Stop Valve, 1/4 Turn, 1/2 X 3/8 in Nominal, Compression End, 125 psi, Media: Potable Water, Brass Body, Santoprene Stem Barrel, Glass-Filled Polypropylene Stem Shaft Trim, Rubber O-Ring Softgoods, Corrosion Resistant, Chrome Plated Zinc Die-Cast Handle, 40 - 140 deg F, Chrome Plated, ASME A112.18.1/CSA B125.1, IAPMO Certified Quick Connect connectors are designed and manufactured for many years of trouble free service. Produced of off-white Polysulfone, a high performance thermal plastic material, the design allows for quick and easy connections without the use of installation tools. NSF-61, NSF-14, CSA B137.5, ASTM F877, UPC, and ASSE 1061 approved. -20 to 300 degrees F temperature range, full port, packing gland, PTFE seat and packing, chrome-plated ball and stem, CSA certified to ASME B16.33 (5G) and B16.44 (125G), CR91-002 (1/2, 2, & 5 psig), UL gas shutoff valve (YRPV), UL manual valves (MHKZ), UL compressed gas shutoff valve (YQNZ), UL flammable liquid shutoff valve (YRBX), UL LP-gas shutoff valve (YSDT), FM approved, threaded ends comply with ANSI B1.20.1, IAMPO listed to cUPC, certified to NSF 61-G.
BrassCraft G2CR14X CD 1/4 Turn Straight Stop Valve Mueller ProLine Full Port Ball Valve Mueller ProLine Compact Pattern Standard Port Gate Valve
BrassCraft Straight Stop Valve, 1/4 Turn, 1/2 X 3/8 in Nominal, Compression End, 125 psi, Media: Potable Water, Brass Body, Santoprene Stem Barrel, Glass-Filled Polypropylene Stem Shaft Trim, Rubber O-Ring Softgoods, Corrosion Resistant, Chrome Plated Zinc Die-Cast Handle, 40 - 140 deg F, Chrome Plated, Carded Full port, PTFE seat and packing, padking gland, chrome-plated brass ball and stem, PEX to copper threaded connection, pipe threads comply with ANSI B1.20.1, PEX connections comply with ASTM F-1807, IAPMO listed to cUPC, certified to NSF 61-G. Standard port, non-rising stem, six-point cast-iron handle, brass wedge disk, threaded ends comply with ANSI B1.20.1, certified to NSF 61.
Mueller ProLine Compact Pattern Standard Port Gate Valve BrassCraft G2R10X CD 1/4 Turn Straight Stop Valve NDS ProGuard Gate Valve
Standard port, non-rising stem, six-point cast-iron handle, brass wedge disk, solder ends comply with ANSI B16.18, certified to NSF 61. Chrome plated brass. PVC construction. Gray color body with red handle. EPDM O-rings. Complies with all applicable ASTM and ANSI standards.
NDS ProGuard Gate Valve Plumb Pak PP60-1PCLF Quarter Turn Angle Stop Valve Mueller ProLine Full Port Ball Valve
PVC construction. Gray color body with red handle. EPDM O-rings. Complies with all applicable ASTM and ANSI standards. Plumb Pak Angle Stop Valve, Quarter Turn, 1/2 X 1/2 in Nominal, Copper Sweat X Compression End, Media: Water, Brass Body, Chrome Plated, For Hot and Cold Water Applications 400 PSI WOG, 160 PSI at 73DegF, full port, packing gland, PTFE seat and packing, chrome-plated brass ball and stem, ideal for use in potable water and radiant heating applications, PEX connections comply with ASTM F-1807, IAPMO listd to cUPC, certified to NSF 61-G.
Plumb Pak K2622PCPOLF 1/4 Turn Quick Lock Angle Supply Line Valve Mueller ProLine Full Port Gate Valve BrassCraft G2R15X CD 1/4 Turn Angle Stop Valve
1/2. X 3/8" O.D. Valve pushes on to PEX, CPVC or Copper, Double O-ring seal, safety clip, Use for tight spots, a shorter stub out, or finished wall/floor. Full port, non-rising stem, screw over bonnet, five-point cast-iron handle, solid wedge disk, meets MSS SP-80, type1, class 150 lb. specification, solder ends comply with ANSI B16.18, certified to NSF 61-G. Chrome plated brass.
Flair-It 16892 Water Supply Line Valve Mueller ProLine Full Port Ball Valve Genova Products 73840 PVC-DWV 90 Deg Long Sweep Elbow
1/2" x 3/8" compression. Connects 1/2" pex or polybutylene and 3/8" compression. No special tools required. -40 to 194 degrees F temperature range, full port, packing gland, PTFE seat and packing, chrome-plated brass ball and stem, CSA certified to 1/2 psig, CSA certified to ASME B16.33(5G), B16.44 (125G), threaded ends comply with ANSI B1.20.1, IAMPO IGC 157 certified, IAPMO listed cUPC, certified to NSF 61. Used to change direction in piping in drain-waste-vent applications. Sometimes called a long turn quarter bend.
BrassCraft G2R12X CD 1/4 Turn Straight Stop Valve BrassCraft G2R17X CD 1/4 Turn Angle Stop Valve Mueller ProLine Quarter Turn Solvent Ball Valve
BrassCraft Straight Stop Valve, 1/4 Turn, 3/8 in Nominal, FIP X Compression End, 125 psi, Media: Potable Water, C36000 Brass Body, Santoprene Stem Barrel, Glass-Filled Polypropylene Stem Shaft Trim, EPDM Stem O-Ring Softgoods, Corrosion Resistant, Chrome Plated Zinc Die-Cast Handle, 40 - 140 deg F, Chrome Plated BrassCraft Angle Stop Valve, 1/4 Turn, 1/2 X 3/8 in Nominal, FIP X Compression End, 125 psi, Media: Potable Water, Compliant Brass Body, Santoprene Stem Barrel, Glass-Filled Polypropylene Stem Shaft Trim, EPDM O-Ring Softgoods, Corrosion Resistant, Chrome Plated Zinc Die-Cast Handle, 40 - 140 deg F, Chrome Plated, Carded For use with cold-water applications, TPV seats, NBR O-rings, fits both schedule 40 and 80 pipes, solvent ends comply with ASTM D2466, certified to NSF 61-G.
PEX VALVE ANGLE COMP 1/2X3/8IN Plumb Pak PP2659PCLF Quarter Turn Angle Stop Valve Anderson 50873-0402 Needle Valve
Use to install shutoff in supply line. Made of PPSU (polysulfone). Works on all Brands of PEX Pipe. Install with pliers remove with screwdriver. No special crimp tool needed. cNSF-14,?cNSF-61, CSA compliant. Fittings and rings included in each bag. Temperature approvals 180 Deg. F at 100 P.S.I. Approved for behind the wall and underground applications. Patent Pending. Chrome Anderson Needle Valve, 1/4 X 1/8 in Nominal, Plastic X Male Pipe End, -65 TO 250 deg F, Brass Body
Apollo APXV3434 Quarter Turn Ball Valve Sharkbite 23036-0000LF 1/4 Turn Angle Stop Valve Sharkbite 23037-0000LF 1/4 Turn Straight Stop Valve
Apollo Ball Valve, Quarter Turn, Series: APXV3434, 3/4 in, 32 - 180 deg F, Crimpex End Connection, Brass Body, NSF Approved, ASTM F1807 The SharkBite Connection System is an instant push-fit connection that connects copper tubing, CTS CPVC and PEX pipe in an combination - no soldering, clamps, unions or glue required. Certified to 200 PSI and 200DegF. Compact, robust DZR brass body. Foundation of a strong, corrosion resistant, durable fitting. Design certified to ANSI/NSF-61 and ASSE 1061 product standard for use in potable water and hydronic heating water distribution.Approved to be used underground and behind walls without access panels. Lead Free Complaint. The SharkBite Connection System is an instant push-fit connection that connects copper tubing, CTS CPVC and PEX pipe in an combination - no soldering, clamps, unions or glue required. Certified to 200 PSI and 200DegF. Compact, robust DZR brass body. Foundation of a strong, corrosion resistant, durable fitting. Design certified to ANSI/NSF-61 and ASSE 1061 product standard for use in potable water and hydronic heating water distribution.Approved to be used underground and behind walls without access panels. Lead Free Complaint.
Sharkbite 23048-0000LF 1/4 Turn Angle Stop Valve VALVE COMP ANG STOP 1/2X1/4IN VALVE STRT STOP COMP 1/2X1/4IN
The SharkBite Connection System is an instant push-fit connection that connects copper tubing, CTS CPVC and PEX pipe in an combination - no soldering, clamps, unions or glue required. Certified to 200 PSI and 200DegF. Compact, robust DZR brass body. Foundation of a strong, corrosion resistant, durable fitting. Design certified to ANSI/NSF-61 and ASSE 1061 product standard for use in potable water and hydronic heating water distribution.Approved to be used underground and behind walls without access panels. Lead Free Complaint. SharkBite is the Push-Fit connection system that is really taking hold. It?s the easiest way to join copper, CPVC, or PEX pipe in any combination with no soldering, clamps, unions, or glue. Just insert the pipe and the stainless steel teeth bite down and grip tight, while a specially formulated O-ring compresses to create a perfect seal. Disassembly is just as fast using the simple disconnect tool so fittings and valves can be easily changed and reused. They can even be rotated after assembly for easier installation in tight spaces. SharkBite is the Push-Fit connection system that is really taking hold. It?s the easiest way to join copper, CPVC, or PEX pipe in any combination with no soldering, clamps, unions, or glue. Just insert the pipe and the stainless steel teeth bite down and grip tight, while a specially formulated O-ring compresses to create a perfect seal. Disassembly is just as fast using the simple disconnect tool so fittings and valves can be easily changed and reused. They can even be rotated after assembly for easier installation in tight spaces.
Plumb Pak PP2103LF Quarter Turn Straight Stop Valve BrassCraft G2PS14X CD 1/4 Turn Straight Stop Valve Mueller ProLine Quarter Turn Ball Valve
Connects to existing valves. Solid chrome plated brass ball. Brass forged body and solid brass stem. Teflon seats - melting point of 621 degrees Fahrenheit. Captured nut. Compression connection. 100% pressure leak tested. Carded. Quarter turn. Compatible with copper, PEX and CPVC. 1/2" Nom Push Connect x 3/8" OD Comp For used with cold water applications,TPV seats NBR O-rings, fits both schedule 40 and 80 pipes, threaded ends comply with ANSI B1.20.1, certified to NSF 61-G.
Watts KwikStop 1/4 Turn Quick Connect Straight Stop Valve Flair-It 16893 Stop Valve VALVE BALL 1-1/2IN S80 SOLVENT
Works with copper, CPVC, Pex, LPDE, MPDE, HDPE and polybutylene tubing in hot and cold water applications. Incorporates stainless steel gripping teeth in the collets, allowing the connectors to interconnect with multiple materials without special tools or tube inserts. Exclusive O-ring guide insures zero-leak connections. Tube orientation can be changed by a simple twist, reducing the amount of tubing required to plumb a water system. Reusable, approved for use behind walls and underground. 1/2" CTS x 3/8" ODC. 1/2" x 3/8" compression. Connects 1/2" pex or polybutylene and 3/8" compression. Rated for 150 PSI at 73 Deg. F. For use with cold water applications, certified to NSF61-G, PTFE seats, EPDM O-rings.
Mueller ProLine Full Port Ball Valve Apollo Valves APXPV1238A 1/4 Turn Angle Stop Valve Watts KwikStop 1/4 Turn Quick Connect Angle Stop Valve
Full port, packing gland, PTFE seat and packing, chrome-plated brass ball and stem, 316 stainless steel grip ring, complies with ASSE 1061, certified to NSF 61-G, IAMPO listed to cUPC, PEX stiffeners included. Apollo Valves Angle Stop Valve, 1/4 Turn, 1/2 X 3/8 in Nominal, Push-Fit X Compression End, Brass Body, 180 deg F, ASTM F1807, NSF Approved, For Use With Apollo Pex Pipe Works with copper, CPVC, Pex, LPDE, MPDE, HDPE and polybutylene tubing in hot and cold water applications. Incorporates stainless steel gripping teeth in the collets, allowing the connectors to interconnect with multiple materials without special tools or tube inserts. Exclusive O-ring guide insures zero-leak connections. Tube orientation can be changed by a simple twist, reducing the amount of tubing required to plumb a water system. Reusable, approved for use behind walls and underground.
Apollo Valves APXPV1238S 1/4 Turn Straight Stop Valve Genova 72934 PVC-DWV Fitting Mueller ProLine Full Port Ball Valve
Apollo Valves Straight Stop Valve, 1/4 Turn, 1/2 X 3/8 in Nominal, Push-Fit X Compression End, Brass Body, 180 deg F, ASTM F1807, NSF Approved, For Use With Apollo Pex Pipe Used to change direction in piping and size of pipe directly into fitting hub; usually a closet flange directly under a toilet. Works well in tight space applications on second floors. 200 PSI WOG, -20 to 300 degrees F temperature range, full port, PTFE seat and packing, chrome plated brass ball and stem, suitable for vacuum use up to 7 PSIA, IAPMO listed to CUPC,  certified to NSF 61-G.
NDS ProGuard Gate Valve NDS ProGuard Gate Valve Genova 73032 PVC-DWV Fitting
PVC construction. Gray color body with red handle. EPDM O-rings. Complies with all applicable ASTM and ANSI standards. PVC construction. Gray color body with red handle. EPDM O-rings. Complies with all applicable ASTM and ANSI standards. Used to connect a branch line or vent at a change of direction in a larger vertical or horizontal pipe.
Sharkbite 23049-0000LF 1/4 Turn Straight Stop Valve Mueller ProLine Full Port Ball Valve BrassCraft G2CR34X CD 1/4 Turn Straight Stop Valve
The SharkBite Connection System is an instant push-fit connection that connects copper tubing, CTS CPVC and PEX pipe in an combination - no soldering, clamps, unions or glue required. Certified to 200 PSI and 200DegF. Compact, robust DZR brass body. Foundation of a strong, corrosion resistant, durable fitting. Design certified to ANSI/NSF-61 and ASSE 1061 product standard for use in potable water and hydronic heating water distribution.Approved to be used underground and behind walls without access panels. Lead Free Complaint. -40 to 194 degrees F temperature range, full port, packing gland, PTFE seat and packing, chrome-plated brass ball and stem, solder ends comply with ANSI B16.18, IAMPO IGC 157 certified, IAPMO listed to cUPC, certified to NSF 61-G. Chrome 1/4 turn straight stop. 1/2" nominal compression inlet x 1/2" O.D. compression outlet. Carded.
Plumb Pak PP32-1PCLF 1/4 Turn Transitional Angle Supply Line Valve Plumb Pak PP32-2PCLF 1/4 Turn Transitional Straight Supply Line Valve