Home > PLUMBING > ROUGH PLUMBING SUPPLIES > VALVES > GAS VALVES
Sort By:
1
Genova 700 Dwv Pipe Reducing Bushing Genova Products 71115 PVC-DWV Sanitary Tee Genova Products 71121 PVC-DWV Sanitary Tee
Inserts into fitting hub to reduce to smaller pipe size in drain-waste-vent applications. Used when connecting a branch line into vertical drain pipe (stack). Used when connecting a branch line into a vertical drain pipe (stack).
Genova 400 Solvent Weld Sewer and Drain Pipe Coupling Genova Products 71120 PVC-DWV Sanitary Tee Genova 71123 PVC-DWV Fitting
Used to join straight lengths of pipe for sewer lines, septic tank and seepage systems. 3" meets or exceeds ASTM D2949 or exceeds ASTM D2729; 4" and 6" meet ASTM D3034. Used when connecting a branch line into vertical drain pipe (stack). Used when connecting a branch line into a vertical drain pipe (stack).
Genova 400 Solvent Weld Sewer and Drain Pipe Coupling BUSHING SPXHUB 1-1/2X1-1/4IN  Mueller ProLine Quarter Turn Solvent Ball Valve
Used to join straight lengths of pipe for sewer lines, septic tank and seepage systems. 3" meets or exceeds ASTM D2949 or exceeds ASTM D2729; 4" and 6" meet ASTM D3034. Inserts into fitting hub to reduce to smaller pipe size in drain-waste-vent applications. For use with cold-water applications, TPV seats, NBR O-rings, fits both schedule 40 and 80 pipes, solvent ends comply with ASTM D2466, certified to NSF 61-G.
Mueller ProLine Quarter Turn Ball Valve Genova 700 Solvent Weld Dwv Pipe Wye Genova 700 Solvent Weld Dwv Pipe Wye
For used with cold water applications,TPV seats NBR O-rings, fits both schedule 40 and 80 pipes, threaded ends comply with ANSI B1.20.1, certified to NSF 61-G. Used when connecting a branch line into a horizontal drain pipe. Also can be used in conjunction with a Twist-Lok plug to provide a cleanout in a drain pipe. Used when connecting a branch line into a horizontal drain pipe. Also can be used in conjunction with a Twist-Lok plug to provide a cleanout in a drain pipe.
Genova 700 Dwv Pipe Reducing Bushing Genova 73515 PVC-DWV Fitting NDS EBV-0500-S 1-Piece Economy Full Port In-Line Ball Valve
Inserts into fitting hub to reduce to smaller pipe size in drain-waste-vent applications. Used to bring two branch lines into a vertical drain pipe (stack). Low profile and compact economy design. PVC construction. 150 PSI rated at 730. (Not for use with compressed air). Solid Teflon seats. Large flow opening. White color. NSF standard listed.
NDS EBV-0500-T 1-Piece Economy Full Port In-Line Ball Valve Genova 700 Solvent Weld Dwv Pipe Reducing Wye Genova 71122 PVC-DWV Fitting
Low profile and compact economy design. PVC construction. 150 PSI rated at 730. (Not for use with compressed air). Solid Teflon seats. Large flow opening. White color. NSF standard listed. Used when connecting a reducing branch line into a horizontal drain pipe. Also, can be used in conjunction with a Twist-Lok plug to provide a cleanout in a drain pipe. Used when connecting a branch line into a vertical drain pipe (stack).
NDS SCP-0500-S Stop Valve Genova 700 Combination Solvent Weld Pipe Tee-Wye NDS SCP-0750-S Stop Valve
PVC construction. For use in hot or cold fluid systems up to 140 degrees Fahrenheit. White color body with red wheel handle. Santoprene seal for chemical resistance. Complies with all applicable ASTM and ANSI standards. Required in some plumbing code areas to connect branch line into a vertical drain pipe instead of conventional tee fitting. Also used to connect horizontal branch pipe approaching a horizontal drain pipe on the perpendicular. (Can be made from a wye and street eighth bend.) PVC construction. For use in hot or cold fluid systems up to 140 degrees Fahrenheit. White color body with red wheel handle. Santoprene seal for chemical resistance. Complies with all applicable ASTM and ANSI standards.
NDS EBV-0750-S 1-Piece Economy Full Port In-Line Ball Valve NDS EBV-0750-T 1-Piece Economy Full Port In-Line Ball Valve Mueller 107-634 Quarter Turn Solvent Ball Valve
Low profile and compact economy design. PVC construction. 150 PSI rated at 730. (Not for use with compressed air). Solid Teflon seats. Large flow opening. White color. NSF standard listed. Low profile and compact economy design. PVC construction. 150 PSI rated at 730. (Not for use with compressed air). Solid Teflon seats. Large flow opening. White color. NSF standard listed. For use with cold-water applications, TPV seats, NBR O-rings, fits both schedule 40 and 80 pipes, solvent ends comply with ASTM D2466, certified to NSF 61-G.
Mueller ProLine Quarter Turn Ball Valve Mueller ProLine Quarter Turn Ball Valve Genova 700 Dwv Pipe Reducing Bushing
For used with cold water applications,TPV seats NBR O-rings, fits both schedule 40 and 80 pipes, threaded ends comply with ANSI B1.20.1, certified to NSF 61-G. For use with hot or cold water applications, PTFE seats, EPDM O-rings, solvent ends comply with ASTM D2466, certified to NSF 61-G. Inserts into fitting hub to reduce to smaller pipe size in drain-waste-vent applications.
Genova 700 Combination Solvent Weld Pipe Tee-Wye Genova 700 Dwv Pipe Reducing Bushing Genova Products 71130 PVC-DWV Sanitary Tee
Required in some plumbing code areas to connect branch line into a vertical drain pipe instead of conventional tee fitting. Also used to connect horizontal branch pipe approaching a horizontal drain pipe on the perpendicular. (Can be made from a wye and street eighth bend.) Inserts into fitting hub to reduce to smaller pipe size in drain-waste-vent applications. Used when connecting a branch line into vertical drain pipe (stack).
Genova 40143 PVC Sewer and Drain Fitting Genova Products 71131 PVC-DWV Sanitary Tee Mueller ProLine Quarter Turn Ball Valve
Used to increase or reduce pipe sizes. Used when connecting a branch line into a vertical drain pipe (stack). Rated for 150 PSI at 73 Deg. F., for use with cold-water applications, gray color, PTFE seats, EPDM O-rings. Threaded ends comply with ANSI B1.20.1. Certified to NSF 61-G. Lead-free compliant.
NDS SCL-0500-T Stop Valve Genova 700 Dwv Reducing Double Sanitary Tee Genova Products 71132 PVC-DWV Sanitary Tee
Acetal copolymer construction for use in hot or cold fluid systems up to 180 degrees Fahrenheit. Use with water and approved chemicals. Bronze color body with red wheel handle. Santoprene seal for chemical resistance. Complies with all applicable ASTM and ANSI standards. Used to bring two reducing branch lines into a vertical drain pipe (stack). Used when connecting a branch line into a vertical drain pipe (stack).
Genova 600 Dwv Pipe Adapter Genova 71416 PVC-DWV Fitting NDS SCL-0750-T Stop Valve
Flush sleeve adapts a Schedule 40 IPS fitting hub to Schedule 30 pipe size. Bagged. Used in conjunction with a threaded plug to provide a cleanout opening. Teflon thread tape is recommended for threaded joints. Acetal copolymer construction for use in hot or cold fluid systems up to 180 degrees Fahrenheit. Use with water and approved chemicals. Bronze color body with red wheel handle. Santoprene seal for chemical resistance. Complies with all applicable ASTM and ANSI standards.
Genova 700 Solvent Weld Dwv Pipe Reducing Wye Genova 700 Dwv Double Sanitary Tee Mueller 107-342NL Full Port Ball Valve
Used when connecting a reducing branch line into a horizontal drain pipe. Also, can be used in conjunction with a Twist-Lok plug to provide a cleanout in a drain pipe. Used to bring two branch lines into a vertical drain pipe (stack). 400 PSI WOG, 160 PSI at 73DegF, full port, packing gland, PTFE seat and packing, chrome-plated brass ball and stem, ideal for use in potable water and radiant heating applications, PEX connections comply with ASTM F-1807, IAPMO listd to cUPC, certified to NSF 61-G.
Plumb Pak PP20062LF 1/4 Turn Straight Shut-Off Valve Genova 400 Solvent Weld Sewer and Drain Pipe Adapter Coupling Plumb Pak PP20050LF 1/4 Turn Angle Shut-Off Valve
Plumb Pak Straight Shut-Off Valve, 1/4 Turn, 1/2 X 3/8 in Nominal, Copper Sweat X OD End, Brass Body, Chrome Plated Used to join straight lengths of pipe for sewer lines, septic tank and seepage systems. Chrome.
Plumb Pak PP20052LF Quarter Turn Straight Stop Valve Genova 700 Solvent Weld Dwv Pipe Reducing Wye Genova 700 Solvent Weld Dwv Pipe Wye
Chrome. Used when connecting a reducing branch line into a horizontal drain pipe. Also, can be used in conjunction with a Twist-Lok plug to provide a cleanout in a drain pipe. Used when connecting a branch line into a horizontal drain pipe. Also can be used in conjunction with a Twist-Lok plug to provide a cleanout in a drain pipe.
Mueller ProLine Quarter Turn Ball Valve Plumb Pak PP20060LF Quarter Turn Angle Stop Valve Plumb Pak PP20051LF 1/4 Turn Angle Shut-Off Valve
For use with hot or cold water applications, PTFE seats, EPDM O-rings, solvent ends comply with ASTM D2466, certified to NSF 61-G. Chrome Chrome.
NDS EBV-1000-T 1-Piece Economy Full Port In-Line Ball Valve NDS EBV-1000-S 1-Piece Economy Full Port In-Line Ball Valve Genova 700 Solvent Weld Dwv Pipe Double Wye
Low profile and compact economy design. PVC construction. 150 PSI rated at 730. (Not for use with compressed air). Solid Teflon seats. Large flow opening. White color. NSF standard listed. Low profile and compact economy design. PVC construction. 150 PSI rated at 730. (Not for use with compressed air). Solid Teflon seats. Large flow opening. White color. NSF standard listed. Used to bring two branch lines into a horizontal drain pipe in drain-waste-vent applications.
Plumb Pak PP20053LF 1/4 Turn Straight Shut-Off Valve Genova 71421 PVC-DWV Fitting B and K 191-432HC Water Supply Line Valves
Chrome. Used in conjunction with a threaded plug to provide a cleanout opening. Teflon thread tape is recommended for threaded joints. B & K Industries Supply Line Valve, Straight, 1/2 x 3/8 in Nominal, Sweat x Compression End, 125 psi, Media: Water, Chrome-Plated Lead-Free Brass Body
B and K 191-222HC Water Supply Line Valves B&K Proline 1/4 Turn Angle Stop Valve Plumb Pak PP20063LF 1/4 Turn Straight Shut-Off Valve
B & K Industries Supply Line Valve, Straight, 3/8 in Nominal, FIP x Compression End, 125 psi, Media: Water, Chrome-Plated Lead-Free Brass Body B&K Angle Stop Valve, 1/4 Turn, Series: Proline, 1/2 X 3/8 in Nominal, Sweat X Compression End, 125 psi, Media: Water, Brass Body, 180 deg F, NSF Approved, cUPC Compliant, Chrome Plated, For Use With Water Supply shut-off Application 5/8" O.D. (1/2" Nom. Copper) x 3/8" O.D. Chrome.
B&K Proline 1/4 Turn Angle Angle Supply Line Valve Watts LF PBQTR-615 1/4 Turn Straight Stop Valve Mueller ProLine Quarter Turn Solvent Ball Valve
B&K Angle Supply Line Valve, 1/4 Turn, Angle, Series: Proline, 1/2 X 3/8 in Nominal, FIP X Compression End, 125 psi, Media: Water, Brass Body Connects to existing valves. Solid ball valve design allows full open or close with a quarter turn and eliminates sticking problems. Brass stem. 1/4 turn on, 1/4 turn off. Chrome plated. For use with cold-water applications, TPV seats, NBR O-rings, fits both schedule 40 and 80 pipes, solvent ends comply with ASTM D2466, certified to NSF 61-G.
Mueller ProLine Quarter Turn Ball Valve Plumb Pak PP20321LF 1/4 Turn Transitional Angle Supply Line Valve B K Industries 191-232HC Water Supply Line Valves
For used with cold water applications,TPV seats NBR O-rings, fits both schedule 40 and 80 pipes, threaded ends comply with ANSI B1.20.1, certified to NSF 61-G. Angle. Chrome B & K Industries Supply Line Valve, Straight, 1/2 x 3/8 in Nominal, FIP x Compression End, 125 psi, Media: Water, Chrome-Plated Lead-Free Brass Body
Genova 700 Combination Solvent Weld Pipe Reducing Tee/Wye Plumb Pak PP20322LF 1/4 Turn Transitional Straight Supply Line Valve Plumb Pak PP20061LF 1/4 Turn Angle Shut-Off Valve
Required in some plumbing code areas to connect a branch line into a vertical drain pipe (stack) instead of a conventional tee fitting. Also used to connect a horizontal branch pipe approaching a horizontal drain pipe on the perpendicular. Straight, chrome. Plumb Pak Angle Shut-Off Valve, 1/4 Turn, 5/8 X 3/8 in Nominal, OD X OD End, Brass Body, Chrome Plated
Mueller ProLine Quarter Turn Ball Valve Genova 700 Dwv Pipe Reducing Bushing Mueller ProLine 2-Piece Gas Ball Valve
Rated for 150 PSI at 73 Deg. F., for use with cold-water applications, gray color, PTFE seats, EPDM O-rings. Threaded ends comply with ANSI B1.20.1. Certified to NSF 61-G. Lead-free compliant. Inserts into fitting hub to reduce to smaller pipe size in drain-waste-vent applications. Two-piece body.Multi-directional flow, chrome-plated brass bal, CSA-ANSI Z21-15 (1/2 Psig), ANSI/ASME 316.44 (5G), UL lised. Threaded ends comply with ANSI B1.20.1. -20 to 300 DegF temperature range. quartert turn lever handle for positive on/off operation, coated aluminum handle for corrosion and solvent resistance.
Watts LF PBQT-090 1/4 Turn Angle Stop Valve Watt P-672 Push Fit Straight Stop Valve Watt P-675 Push Fit Angle Stop Valve
Solid ball valve design. Brass stem. Water supply valve, 1/4 turn on and 1/4 turn off. Chrome. Bagged. Works with copper, CPVC, Pex, LPDE, MPDE, HDPE and polybutylene tubing in hot and cold water applications. Incorporates stainless steel gripping teeth in the collets, allowing the connectors to interconnect with multiple materials without special tools or tube inserts. Exclusive O-ring guide insures zero-leak connections. Tube orientation can be changed by a simple twist, reducing the amount of tubing required to plumb a water system. Reusable, approved for use behind walls and underground. Works with copper, CPVC, Pex, LPDE, MPDE, HDPE and polybutylene tubing in hot and cold water applications. Incorporates stainless steel gripping teeth in the collets, allowing the connectors to interconnect with multiple materials without special tools or tube inserts. Exclusive O-ring guide insures zero-leak connections. Tube orientation can be changed by a simple twist, reducing the amount of tubing required to plumb a water system. Reusable, approved for use behind walls and underground.
Apollo Valves APXVS1238C 1/4 Turn Straight Stop Valve Genova 700 Solvent Weld Dwv Pipe Double Wye Apollo Valves APXVA1238C 1/4 Turn Angle Stop Valve
Apollo Valves Straight Stop Valve, 1/4 Turn, 1/2 X 3/8 in Nominal, Pex Barb X Comp End, Brass Body, 180 deg F, ASTM F1807, NSF Approved, For Use With Apollo Pex Pipe Used to bring two branch lines into a horizontal drain pipe in drain-waste-vent applications. Apollo Valves Angle Stop Valve, 1/4 Turn, 1/2 X 3/8 in Nominal, Pex Barb X Comp End, Brass Body, 180 deg F, ASTM F1807, NSF Approved, For Use With Apollo Pex Pipe
Watts LF PBQT-290 1/4 Turn Angle Stop Valve B&K Proline 1/4 Turn Angle Angle Supply Line Valve Watt P-676 Push Fit Angle Stop Valve
Solid ball valve design. Brass stem. Water supply valve, 1/4 turn on and 1/4 turn off. Chrome plated. Bagged. B&K Angle Supply Line Valve, 1/4 Turn, Angle, Series: Proline, 5/8 X 3/8 in Nominal, Compression End, 125 psi, Media: Water, Brass Body, 180 deg F, NSF Approved, cUPC Compliant, Chrome Plated Works with copper, CPVC, Pex, LPDE, MPDE, HDPE and polybutylene tubing in hot and cold water applications. Incorporates stainless steel gripping teeth in the collets, allowing the connectors to interconnect with multiple materials without special tools or tube inserts. Exclusive O-ring guide insures zero-leak connections. Tube orientation can be changed by a simple twist, reducing the amount of tubing required to plumb a water system. Reusable, approved for use behind walls and underground.
Watts P-673 Quick Connect Straight Stop Valve Mueller ProLine Full Port Ball Valve VALVE 1/2IN FIP X FIP
Quick Connect connectors are designed and manufactured for many years of trouble free service. Produced of off-white Polysulfone, a high performance thermal plastic material, the design allows for quick and easy connections without the use of installation tools. NSF-61, NSF-14, CSA B137.5, ASTM F877, UPC, and ASSE 1061 approved. Polybagged. 400 PSI WOG, 160 PSI at 73DegF, full port, packing gland, PTFE seat and packing, chrome-plated brass ball and stem, ideal for use in potable water and radiant heating applications, PEX connections comply with ASTM F-1807, IAPMO listd to cUPC, certified to NSF 61-G. Yellow handle. 1/2 PSI maximum working pressure.
VALVE GARDHOSE 1/2PEX X 3/4MH Mueller ProLine Quarter Turn Solvent Ball Valve Mueller ProLine Quarter Turn Ball Valve
For use with cold-water applications, TPV seats, NBR O-rings, fits both schedule 40 and 80 pipes, solvent ends comply with ASTM D2466, certified to NSF 61-G. For used with cold water applications,TPV seats NBR O-rings, fits both schedule 40 and 80 pipes, threaded ends comply with ANSI B1.20.1, certified to NSF 61-G.
B and K Industries 191-032HC Water Valve Watts P-671 Quick Connect Straight Stop Valve Plumb Pak PP20064LF Quarter Turn Straight Stop Valve
B & K Industries Supply Line Valve, Straight, 5/8 x 3/8 in Nominal, Compression End, 125 psi, Media: Water, Chrome-Plated Lead-Free Brass Body Works with copper, CPVC, PEX, LPDE, MPDE, HDPE and polybutylene tubing in hot and cold water applications. Incorporates stainless steel gripping teeth in the collets, allowing the connectors to interconnect with multiple materials without special tools or tube inserts. Exclusive O-ring guide insures zero-leak connections. Tube orientation can be changed by a simple twist, reducing the amount of tubing required to plumb a water system. Reusable, approved for use behind walls and underground. 1/2" x 1/4" OD. Chrome plated.
Genova 700 Dwv Reducing Double Sanitary Tee Mueller ProLine Full Port Ball Valve Watt P-677 Push Fit Angle Stop Valve
Used to bring two reducing branch lines into a vertical drain pipe (stack). -20 to 300 degrees F temperature range, full port, packing gland, PTFE seat and packing, chrome-plated ball and stem, CSA certified to ASME B16.33 (5G) and B16.44 (125G), CR91-002 (1/2, 2, & 5 psig), UL gas shutoff valve (YRPV), UL manual valves (MHKZ), UL compressed gas shutoff valve (YQNZ), UL flammable liquid shutoff valve (YRBX), UL LP-gas shutoff valve (YSDT), FM approved, threaded ends comply with ANSI B1.20.1, IAMPO listed to cUPC, certified to NSF 61-G. Quick Connect connectors are designed and manufactured for many years of trouble free service. Produced of off-white Polysulfone, a high performance thermal plastic material, the design allows for quick and easy connections without the use of installation tools. NSF-61, NSF-14, CSA B137.5, ASTM F877, UPC, and ASSE 1061 approved. Polybagged.
Mueller ProLine Full Port Ball Valve Genova Products 71140 PVC-DWV Sanitary Tee Genova 700 Solvent Weld Dwv Pipe Reducing Wye
-20 to 300 degrees F temperature range, full port, packing gland, PTFE seat and packing, chrome-plated ball and stem, CSA certified to ASME B16.33 (5G) and B16.44 (125G), CR91-002 (1/2, 2, & 5 psig), UL gas shutoff valve (YRPV), UL manual valves (MHKZ), UL compressed gas shutoff valve (YQNZ), UL flammable liquid shutoff valve (YRBX), UL LP-gas shutoff valve (YSDT), FM approved, threaded ends comply with ANSI B1.20.1, IAMPO listed to cUPC, certified to NSF 61-G. Used when connecting a branch line into vertical drain pipe (stack). Used when connecting a reducing branch line into a horizontal drain pipe. Also, can be used in conjunction with a Twist-Lok plug to provide a cleanout in a drain pipe.
Mueller ProLine Quarter Turn Ball Valve Plumb Pak PP60PCLF Quarter Turn Angle Stop Valve Mueller ProLine Quarter Turn Solvent Ball Valve
For used with cold water applications,TPV seats NBR O-rings, fits both schedule 40 and 80 pipes, threaded ends comply with ANSI B1.20.1, certified to NSF 61-G. Chrome For use with cold-water applications, TPV seats, NBR O-rings, fits both schedule 40 and 80 pipes, solvent ends comply with ASTM D2466, certified to NSF 61-G.
VALVE 3/8IN FIP X FIP         Genova 73532 PVC-DWV Fitting Plumb Pak PP51PCLF 1/4 Turn Angle Shut-Off Valve
Yellow handle. 1/2 PSI maximum working pressure. Used to bring two reducing branch lines into a vertical drain pipe (stack). Quarter turn angle shut off valve. Chrome.
Plumb Pak PP50PCLF 1/4 Turn Angle Shut-Off Valve Plumb Pak PP46PCLF 1/4 Turn Angle Stop Valve Watt P-683 Push Fit Angle Stop Valve
Chrome. Carded. Quick Connect connectors are designed and manufactured for many years of trouble free service. Produced of off-white Polysulfone, a high performance thermal plastic material, the design allows for quick and easy connections without the use of installation tools. NSF-61, NSF-14, CSA B137.5, ASTM F877, UPC, and ASSE 1061 approved. Polybagged.
Mueller ProLine Full Port Ball Valve Brass Craft PSBV503-8 Quarter Turn Gas Ball Valve Plumb Pak PP53PCLF 1/4 Turn Straight Shut-Off Valve
-40 to 194 degrees F temperature range, full port, packing gland, PTFE seat and packing, chrome-plated brass ball and stem, solder ends comply with ANSI B16.18, IAMPO IGC 157 certified, IAPMO listed to cUPC, certified to NSF 61-G. Gas appliance connector with lever handle. AGA Design Certified. Chrome.
Mueller ProLine Quarter Turn Ball Valve Watt P-678 Push Fit Angle Stop Valve Genova 400 Solvent Weld Sewer and Drain Pipe Adapter Coupling
For use with hot or cold water applications, PTFE seats, EPDM O-rings, solvent ends comply with ASTM D2466, certified to NSF 61-G. Quick Connect connectors are designed and manufactured for many years of trouble free service. Produced of off-white Polysulfone, a high performance thermal plastic material, the design allows for quick and easy connections without the use of installation tools. NSF-61, NSF-14, CSA B137.5, ASTM F877, UPC, and ASSE 1061 approved. Polybagged. Used to join straight lengths of pipe for sewer lines, septic tank and seepage systems.
Plumb Pak PP63PCLF 1/4 Turn Straight Shut-Off Valve VLV QTR TURN ANG 1/2X1/4IN    VLV QTR TURN STR 1/2X1/4
5/8" O.D. (1/2" Nom. Copper) x 3/8" O.D. Chrome.
Plumb Pak PP61PCLF 1/4 Turn Angle Shut-Off Valve VALVE 1/2IN FIP X FIP 1 PIECE Plumb Pak PP52PCLF 1/4 Turn Straight Shut-Off Valve
Plumb Pak Angle Shut-Off Valve, 1/4 Turn, 1/2 X 3/8 in Nominal, Nominal Compression X OD End, Brass Body, Chrome Plated Yellow handle. 1/2 PSI maximum working pressure. Chrome.
Mueller ProLine Full Port Ball Valve VALVE 3/4IN FIP X FIP         Watts LF PBQTP-250 1/4 Turn Angle Stop Valve
-20 to 300 degrees F temperature range, full port, packing gland, PTFE seat and packing, chrome-plated brass ball and stem, solder ends comply with ANSI B16.18, IAPMO listed to cUPC, certified to NSF 61-G. Yellow handle. 1/2 PSI maximum working pressure. Solid ball valve design allows full open or close with a quarter turn and eliminates sticking problems. Brass stem. 1/4 turn on, 1/4 turn off. Chrome plated.
Watts LF PBQT-118 1/4 Turn 3-Way Angle Stop Valve Plumb Pak PP123PCLF 1/4 Turn Angle Shut-Off Valve Apollo APXV1212 Quarter Turn Ball Valve
Solid ball valve design allows full open or close with a quarter turn and eliminates sticking problems. Brass stem. 1/4 turn on, 1/4 turn off. Chrome plated. Angle, chrome Apollo Ball Valve, Quarter Turn, Series: APXV1212, 1/2 in, 32 - 180 deg F, Crimpex End Connection, Brass Body, NSF Approved, ASTM F1807
Plumb Pak PP62PCLF 1/4 Turn Straight Shut-Off Valve PEX VALVE STOP COMPRSN 1/2X3/8 Plumb Pak PP53-1PCLF 1/4 Turn Straight Shut-Off Valve
Plumb Pak Straight Shut-Off Valve, 1/4 Turn, 1/2 X 3/8 in Nominal, Copper Sweat X OD End, Brass Body, Chrome Plated Made of PPSU (polysulfone). Works on all Brands of PEX Pipe. Install with pliers remove with screwdriver. No special crimp tool needed. cNSF-14,?cNSF-61, CSA compliant. Fittings and rings included in each bag. Temperature approvals 180 Deg. F at 100 P.S.I. Approved for behind the wall and underground applications. Patent Pending. Plumb Pak Straight Shut-Off Valve, 1/4 Turn, 1/2 X 1/2 in Nominal, FIP X OD End, Brass Body, Chrome Plated
Genova 71141 PVC-DWV Fitting Watts LF PBQT-113 1/4 Turn 3-Way Angle Stop Valve Watts LF PBQT-213 1/4 Turn 3-Way Angle Stop Valve
Used when connecting a branch line into a vertical drain pipe (stack). Solid ball valve design allows full open or close with a quarter turn and eliminates sticking problems. Brass stem. 1/4 turn on, 1/4 turn off. Chrome plated. Solid ball valve design allows full open or close with a quarter turn and eliminates sticking problems. Brass stem. 1/4 turn on, 1/4 turn off. Chrome plated.
Genova 53067 Washer Hose Valve Watts LF PBQT-218 1/4 Turn 3-Way Angle Stop Valve Brass Craft PSSL-12 Gas Ball Valves
Solvent welds directly to 1/2" CPVC tubing and adapts to female hose couplings. Most often used in conjunction with No.53056/530561 wing elbow to supply water to automatic washing machines. Bulk. Solid ball valve design allows full open or close with a quarter turn and eliminates sticking problems. Brass stem. 1/4 turn on, 1/4 turn off. Chrome plated. Recommended for appliance connections. Corrosion resistant brass construction with yellow painted aluminum handles. Threads conform to all applicable standards. CSA design Certified and meets ANSI Z21-15.
Mueller ProLine Quarter Turn Ball Valve Pro Bite 190-932HC/LF953AR Water Valve Brass Craft PSSD-41 Quarter Turn Gas Ball Valve
Rated for 150 PSI at 73 Deg. F., for use with cold-water applications, gray color, PTFE seats, EPDM O-rings. Threaded ends comply with ANSI B1.20.1. Certified to NSF 61-G. Lead-free compliant. Connects to copper, PEX or CPVC, no glue, soldering, crimping or special tools, approved for in-wall and underground burial, approved for potable water, radiant and hydronic heating, easily repositioned or removed. Recommended for appliance connections. Corrosion resistant brass construction with yellow painted aluminum handles. Threads conform to all applicable standards. CSA design Certified and meets ANSI Z21-15.
Plumb Pak PP62-1PCLF 1/4 Turn Angle Shut-Off Valve Plumb Pak PP51-1PCLF 1/4 Turn Angle Shut-Off Valve Mueller ProLine 1-Piece Gas Ball Valve
5/8" O.D. (1/2" Nom. Copper) x 1/2" O.D. Quarter turn angle shut off valve. Chrome. Heavy forged brass construction. One piece body. Non-displaceable chrome plated forged brass ball. Coated aluminum handle, for use with natural manufactured, mixed liquefied petroleum and LP gas/air mixtures. Approved by the American Gas Association, Underwriters Laboratories and the Canadian Gas Association. Special rubber seals conform to ASTM D471. Threaded ends comply with ANSI B1.20.1. UPC coded. Bulk handy carton. UL listed.
Plumb Pak PP67PCLF 1/4 Turn Angle Shut-Off Valve Plumb Pak PP2068POLF Quarter Turn Straight Stop Valve Plumb Pak PP2071LF Quarter Turn Straight Stop Valve
5/8" O.D. (1/2" NOM. Copper) x 7/16" O.D. - 1/2" O.D. Carded. 5/8" O.D. Comp. X 3/8" O.D. Valve pushes on to PEX, CPVC or Copper, Double O-ring seal, safety clip, Use for tight spots, a shorter stub out, or finished wall/floor. Chrome plated.
Genova 700 Solvent Weld Dwv Pipe Reducing Wye Plumb Pak PP2622POLF 1/4 Turn Push-Fit Quick Lock Angle Stop Valve NDS EBV-1250-S 1-Piece Economy Full Port In-Line Ball Valve
Used when connecting a reducing branch line into a horizontal drain pipe. Also, can be used in conjunction with a Twist-Lok plug to provide a cleanout in a drain pipe. 1/2. X 3/8" O.D. Valve pushes on to PEX, CPVC or Copper, Double O-ring seal, safety clip, Use for tight spots, a shorter stub out, or finished wall/floor. Low profile and compact economy design. PVC construction. 150 PSI rated at 730. (Not for use with compressed air). Solid Teflon seats. Large flow opening. White color. NSF standard listed.
NDS EBV-1250-T 1-Piece Economy Full Port In-Line Ball Valve Mueller ProLine Full Port Ball Valve Pro Bite 191-932HC/LF953SR Water Supply Line Valves
Low profile and compact economy design. PVC construction. 150 PSI rated at 730. (Not for use with compressed air). Solid Teflon seats. Large flow opening. White color. NSF standard listed. Nickel finish, full port, PTFE disc and seat, frost-proof stainless steel ball design, CSA ANSI Z 21.15 (1/2 PSIG), CSA certified to ASME B 16.33 (5G), CSA certified to ASME B16.44 (125G), UL gas shutoff valve (YRPV), UL manual valves (MHKZ), UL compressed gas shutoff valve (YQNZ), UL flammable liquid shutoff valve (YRBX), UL LP-Gas shutoff valve (YSDT), FM approved, comforms to MSS-SP-110, meets fed spec WW-V-35, Type II, Class A Style 3, threaded ends comply with ANSI B1.20.1, certified to NSF 61-G. Mueller Push Fit Valve, Straight Pattern, 1/2 x 3/8 in Nominal, Push-Fit x Compression End, 200 psi, Media: Water, Brass Body, 200 Deg F, Standards: CSA Certified, NSF and cUPC Approved, Chrome Plated Finish, For Plumbing Applications
Mueller ProLine Full Port Ball Valve Genova 400 Solvent Weld Sewer and Drain Pipe Coupling Plumb Pak PP61-1PCLF 1/4 Turn Straight Shut-Off Valve
-40 to 194 degrees F temperature range, full port, packing gland, PTFE seat and packing, chrome-plated brass ball and stem, CSA certified to 1/2 psig, CSA certified to ASME B16.33(5G), B16.44 (125G), threaded ends comply with ANSI B1.20.1, IAMPO IGC 157 certified, IAPMO listed cUPC, certified to NSF 61. Used to join straight lengths of pipe for sewer lines, septic tank and seepage systems. 3" meets or exceeds ASTM D2949 or exceeds ASTM D2729; 4" and 6" meet ASTM D3034. Plumb Pak Straight Shut-Off Valve, 1/4 Turn, 1/2 X 1/2 in Nominal, Copper Sweat X OD End, Brass Body, Chrome Plated
BrassCraft G2CR19X CD 1/4 Turn Angle Stop Valve Genova 700 Combination Solvent Weld Pipe Reducing Tee/Wye Genova 71431 PVC-DWV Fitting
BrassCraft Angle Stop Valve, 1/4 Turn, 1/2 X 3/8 in Nominal, Compression End, 125 psi, Media: Potable Water, Brass Body, Santoprene Stem Barrel, Glass-Filled Polypropylene Stem Shaft Trim, Rubber O-Ring Softgoods, Corrosion Resistant, Chrome Plated Zinc Die-Cast Handle, 40 - 140 deg F, Chrome Plated, ASME A112.18.1/CSA B125.1, IAPMO Certified Required in some plumbing code areas to connect a branch line into a vertical drain pipe (stack) instead of a conventional tee fitting. Also used to connect a horizontal branch pipe approaching a horizontal drain pipe on the perpendicular. Used in conjunction with a threaded plug to provide a cleanout opening. Teflon thread tape is recommended for threaded joints.
Watt P-681 Push Fit Supply Line Valve Genova 700 Combination Solvent Weld Pipe Tee-Wye Genova Products 71142 PVC-DWV Reducing Sanitary Tee
Quick Connect connectors are designed and manufactured for many years of trouble free service. Produced of off-white Polysulfone, a high performance thermal plastic material, the design allows for quick and easy connections without the use of installation tools. NSF-61, NSF-14, CSA B137.5, ASTM F877, UPC, and ASSE 1061 approved. Required in some plumbing code areas to connect a branch line into vertical drain pipe instead of conventional tee fitting. Also used to connect a horizontal branch pipe approaching a horizontal drain pipe on the perpendicular. (Can be made from a wye and a street eighth bend.) Used when connecting a branch line into a vertical drain pipe (stack).
Mueller ProLine Full Port Ball Valve VALVE 3/4IN FIP X FIP 1 PIECE BrassCraft G2CR14X CD 1/4 Turn Straight Stop Valve
-20 to 300 degrees F temperature range, full port, packing gland, PTFE seat and packing, chrome-plated ball and stem, CSA certified to ASME B16.33 (5G) and B16.44 (125G), CR91-002 (1/2, 2, & 5 psig), UL gas shutoff valve (YRPV), UL manual valves (MHKZ), UL compressed gas shutoff valve (YQNZ), UL flammable liquid shutoff valve (YRBX), UL LP-gas shutoff valve (YSDT), FM approved, threaded ends comply with ANSI B1.20.1, IAMPO listed to cUPC, certified to NSF 61-G. Yellow handle. 1/2 PSI maximum working pressure. BrassCraft Straight Stop Valve, 1/4 Turn, 1/2 X 3/8 in Nominal, Compression End, 125 psi, Media: Potable Water, Brass Body, Santoprene Stem Barrel, Glass-Filled Polypropylene Stem Shaft Trim, Rubber O-Ring Softgoods, Corrosion Resistant, Chrome Plated Zinc Die-Cast Handle, 40 - 140 deg F, Chrome Plated, Carded
Mueller ProLine Full Port Ball Valve Brass Craft TBV6F-8 Quarter Turn Gas Ball Valve BrassCraft G2R10X CD 1/4 Turn Straight Stop Valve
Full port, PTFE seat and packing, padking gland, chrome-plated brass ball and stem, PEX to copper threaded connection, pipe threads comply with ANSI B1.20.1, PEX connections comply with ASTM F-1807, IAPMO listed to cUPC, certified to NSF 61-G. Forged brass body eliminates pinhole leaks commonly associated with cast products. Specially designed seat rings are made of pure PTFE to assure longer life. Quarter-turn design for easy on/off operation. 100% leak tested. Blow-out proof stem is assembled from the inside with double O-rings to ensure safe, reliable performance. Large octagonal wrench flats for easy installation. CSA design-certified. Also design-certified and manufactured in accordance with ANSI Z21.15 CSA 9.1, ANSI/ASME B16.33, ANSI/ASME B16.44, CSA-US/C 3-88, CSA-US/C CR91-002, and CSA 3.16 Chrome plated brass.
Brass Craft TBVF8 Quarter Turn Gas Ball Valve Genova 700 Solvent Weld Dwv Pipe Wye Plumb Pak PP60-1PCLF Quarter Turn Angle Stop Valve
Forged brass body eliminates pinhole leaks commonly associated with cast products. Specially designed seat rings are made of pure PTFE to assure longer life. Quarter-turn design for easy on/off operation. 100% leak tested. Blow-out proof stem is assembled from the inside with double O-rings to ensure safe, reliable performance. Large octagonal wrench flats for easy installation. CSA design-certified. Also design-certified and manufactured in accordance with ANSI Z21.15 CSA 9.1, ANSI/ASME B16.33, ANSI/ASME B16.44, CSA-US/C 3-88, CSA-US/C CR91-002, and CSA 3.16 Used when connecting a branch line into a horizontal drain pipe. Also can be used in conjunction with a Twist-Lok plug to provide a cleanout in a drain pipe. Plumb Pak Angle Stop Valve, Quarter Turn, 1/2 X 1/2 in Nominal, Copper Sweat X Compression End, Media: Water, Brass Body, Chrome Plated, For Hot and Cold Water Applications
Mueller ProLine Full Port Ball Valve Mueller ProLine 1-Piece Gas Ball Valve Plumb Pak K2622PCPOLF 1/4 Turn Quick Lock Angle Supply Line Valve
400 PSI WOG, 160 PSI at 73DegF, full port, packing gland, PTFE seat and packing, chrome-plated brass ball and stem, ideal for use in potable water and radiant heating applications, PEX connections comply with ASTM F-1807, IAPMO listd to cUPC, certified to NSF 61-G. Heavy forged brass construction. One piece body. Non-displaceable chrome plated forged brass ball. Coated aluminum handle, for use with natural manufactured, mixed liquefied petroleum and LP gas/air mixtures. Approved by the American Gas Association, Underwriters Laboratories and the Canadian Gas Association. Special rubber seals conform to ASTM D471. Threaded ends comply with ANSI B1.20.1. UPC coded. Bulk handy carton. UL listed. 1/2. X 3/8" O.D. Valve pushes on to PEX, CPVC or Copper, Double O-ring seal, safety clip, Use for tight spots, a shorter stub out, or finished wall/floor.
B K Industries 117-592 Gas Ball Valves BrassCraft G2R15X CD 1/4 Turn Angle Stop Valve Flair-It 16892 Water Supply Line Valve
Forged brass 1-piece body. Chrome plated forged brass ball. Coated aluminum handle. 9/16''-24 fine thread flare for 3/8'' tube. Threaded ends comply with ANSI B1.20.1. CSA Certified, CSA- 3-88 (2 PSIG) Certified. Threaded flare ends comply with SAE F513. UPC coded bulk. Chrome plated brass. 1/2" x 3/8" compression. Connects 1/2" pex or polybutylene and 3/8" compression. No special tools required.
Mueller ProLine Full Port Ball Valve BrassCraft G2R12X CD 1/4 Turn Straight Stop Valve Genova Products 71143 PVC-DWV Reducing Sanitary Tee
-40 to 194 degrees F temperature range, full port, packing gland, PTFE seat and packing, chrome-plated brass ball and stem, CSA certified to 1/2 psig, CSA certified to ASME B16.33(5G), B16.44 (125G), threaded ends comply with ANSI B1.20.1, IAMPO IGC 157 certified, IAPMO listed cUPC, certified to NSF 61. BrassCraft Straight Stop Valve, 1/4 Turn, 3/8 in Nominal, FIP X Compression End, 125 psi, Media: Potable Water, C36000 Brass Body, Santoprene Stem Barrel, Glass-Filled Polypropylene Stem Shaft Trim, EPDM Stem O-Ring Softgoods, Corrosion Resistant, Chrome Plated Zinc Die-Cast Handle, 40 - 140 deg F, Chrome Plated Used when connecting a branch line into a vertical drain pipe (stack).
BrassCraft G2R17X CD 1/4 Turn Angle Stop Valve Mueller ProLine 2-Piece Gas Ball Valve Mueller ProLine Quarter Turn Solvent Ball Valve
BrassCraft Angle Stop Valve, 1/4 Turn, 1/2 X 3/8 in Nominal, FIP X Compression End, 125 psi, Media: Potable Water, Compliant Brass Body, Santoprene Stem Barrel, Glass-Filled Polypropylene Stem Shaft Trim, EPDM O-Ring Softgoods, Corrosion Resistant, Chrome Plated Zinc Die-Cast Handle, 40 - 140 deg F, Chrome Plated, Carded Two-piece body.Multi-directional flow, chrome-plated brass bal, CSA-ANSI Z21-15 (1/2 Psig), ANSI/ASME 316.44 (5G), UL lised. Threaded ends comply with ANSI B1.20.1. -20 to 300 DegF temperature range. quartert turn lever handle for positive on/off operation, coated aluminum handle for corrosion and solvent resistance. For use with cold-water applications, TPV seats, NBR O-rings, fits both schedule 40 and 80 pipes, solvent ends comply with ASTM D2466, certified to NSF 61-G.
PEX VALVE ANGLE COMP 1/2X3/8IN Plumb Pak PP2659PCLF Quarter Turn Angle Stop Valve VALVE1/2IN FIP X 15/16IN FLARE
Use to install shutoff in supply line. Made of PPSU (polysulfone). Works on all Brands of PEX Pipe. Install with pliers remove with screwdriver. No special crimp tool needed. cNSF-14,?cNSF-61, CSA compliant. Fittings and rings included in each bag. Temperature approvals 180 Deg. F at 100 P.S.I. Approved for behind the wall and underground applications. Patent Pending. Chrome Yellow handle. 1/2 PSI maximum working pressure.
Apollo APXV3434 Quarter Turn Ball Valve Mueller ProLine 1-Piece Quarter Turn Gas Ball Valve Plumb Pak PP2103LF Quarter Turn Straight Stop Valve
Apollo Ball Valve, Quarter Turn, Series: APXV3434, 3/4 in, 32 - 180 deg F, Crimpex End Connection, Brass Body, NSF Approved, ASTM F1807 -20 to 300 degrees F. temperature range, sure-off tamper-resistant handle, quarter, push-to-turn operation prevents unintentional opening of valve, coated aluminum handle, multi-directional flow, one-piece body, chrome-plated brass ball. CSA-ANSI Z21.15 (1/2 PSIG), ANSI/ASME B16.44(5G),UL listed, threaded ends comply with ANSI B1.20.1 Connects to existing valves. Solid chrome plated brass ball. Brass forged body and solid brass stem. Teflon seats - melting point of 621 degrees Fahrenheit. Captured nut. Compression connection. 100% pressure leak tested. Carded.
BrassCraft G2PS14X CD 1/4 Turn Straight Stop Valve Mueller ProLine 1-Piece Gas Ball Valve Mueller ProLine Quarter Turn Ball Valve
Quarter turn. Compatible with copper, PEX and CPVC. 1/2" Nom Push Connect x 3/8" OD Comp Heavy forged brass construction. One piece body. Non-displaceable chrome plated forged brass ball. Coated aluminum handle, for use with natural manufactured, mixed liquefied petroleum and LP gas/air mixtures. Approved by the American Gas Association, Underwriters Laboratories and the Canadian Gas Association. Special rubber seals conform to ASTM D471. Threaded ends comply with ANSI B1.20.1. UPC coded. Bulk handy carton. UL listed. For used with cold water applications,TPV seats NBR O-rings, fits both schedule 40 and 80 pipes, threaded ends comply with ANSI B1.20.1, certified to NSF 61-G.
Watts KwikStop 1/4 Turn Quick Connect Straight Stop Valve Flair-It 16893 Stop Valve VALVE BALL 1-1/2IN S80 SOLVENT
Works with copper, CPVC, Pex, LPDE, MPDE, HDPE and polybutylene tubing in hot and cold water applications. Incorporates stainless steel gripping teeth in the collets, allowing the connectors to interconnect with multiple materials without special tools or tube inserts. Exclusive O-ring guide insures zero-leak connections. Tube orientation can be changed by a simple twist, reducing the amount of tubing required to plumb a water system. Reusable, approved for use behind walls and underground. 1/2" CTS x 3/8" ODC. 1/2" x 3/8" compression. Connects 1/2" pex or polybutylene and 3/8" compression. Rated for 150 PSI at 73 Deg. F. For use with cold water applications, certified to NSF61-G, PTFE seats, EPDM O-rings.
Mueller ProLine Full Port Ball Valve Apollo Valves APXPV1238A 1/4 Turn Angle Stop Valve Genova 700 Dwv Double Sanitary Tee
Full port, packing gland, PTFE seat and packing, chrome-plated brass ball and stem, 316 stainless steel grip ring, complies with ASSE 1061, certified to NSF 61-G, IAMPO listed to cUPC, PEX stiffeners included. Apollo Valves Angle Stop Valve, 1/4 Turn, 1/2 X 3/8 in Nominal, Push-Fit X Compression End, Brass Body, 180 deg F, ASTM F1807, NSF Approved, For Use With Apollo Pex Pipe Used to bring two branch lines into a vertical drain pipe (stack).
Watts KwikStop 1/4 Turn Quick Connect Angle Stop Valve Apollo Valves APXPV1238S 1/4 Turn Straight Stop Valve Brass Craft PSBV503-12 Quarter Turn Gas Ball Valve
Works with copper, CPVC, Pex, LPDE, MPDE, HDPE and polybutylene tubing in hot and cold water applications. Incorporates stainless steel gripping teeth in the collets, allowing the connectors to interconnect with multiple materials without special tools or tube inserts. Exclusive O-ring guide insures zero-leak connections. Tube orientation can be changed by a simple twist, reducing the amount of tubing required to plumb a water system. Reusable, approved for use behind walls and underground. Apollo Valves Straight Stop Valve, 1/4 Turn, 1/2 X 3/8 in Nominal, Push-Fit X Compression End, Brass Body, 180 deg F, ASTM F1807, NSF Approved, For Use With Apollo Pex Pipe Gas appliance connector with lever handle. AGA Design Certified.
Mueller ProLine Full Port Ball Valve Mueller ProLine Full Port Ball Valve VALVE 3/4IN FIP X 15/16 FLARE
200 PSI WOG, -20 to 300 degrees F temperature range, full port, PTFE seat and packing, chrome plated brass ball and stem, suitable for vacuum use up to 7 PSIA, IAPMO listed to CUPC,  certified to NSF 61-G. -40 to 194 degrees F temperature range, full port, packing gland, PTFE seat and packing, chrome-plated brass ball and stem, solder ends comply with ANSI B16.18, IAMPO IGC 157 certified, IAPMO listed to cUPC, certified to NSF 61-G. Yellow handle. 1/2 PSI maximum working pressure.
VALVE 3/4IN FIP X 5/8IN FLARE BrassCraft G2CR34X CD 1/4 Turn Straight Stop Valve Plumb Pak PP32-1PCLF 1/4 Turn Transitional Angle Supply Line Valve
Yellow handle. 1/2 PSI maximum working pressure. Chrome 1/4 turn straight stop. 1/2" nominal compression inlet x 1/2" O.D. compression outlet. Carded. Angle. Chrome
Plumb Pak PP32-2PCLF 1/4 Turn Transitional Straight Supply Line Valve NDS EBV-1500-S 1-Piece Economy Full Port In-Line Ball Valve NDS EBV-1500-T 1-Piece Economy Full Port In-Line Ball Valve
Straight, chrome. Low profile and compact economy design. PVC construction. 150 PSI rated at 730. (Not for use with compressed air). Solid Teflon seats. Large flow opening. White color. NSF standard listed. Low profile and compact economy design. PVC construction. 150 PSI rated at 730. (Not for use with compressed air). Solid Teflon seats. Large flow opening. White color. NSF standard listed.
Mueller ProLine Full Port Ball Valve Plumb Pak PP2901VLF 3-Way Stop Valve VLV QTR TRN INLN 1/2X1/2X1/4IN
-20 to 300 degrees F temperature range, full port, packing gland, PTFE seat and packing, chrome-plated brass ball and stem, solder ends comply with ANSI B16.18, IAPMO listed to cUPC, certified to NSF 61-G. Chrome plated.
VLV QTR TRN INLN 1/2X1/2X3/8IN QRTR TURN ANG VLV 5/8OD       Sharkbite 23036-0000LF 1/4 Turn Angle Stop Valve
Push Fit application valve fits 1/2" CTS, PEX, CPVC. The SharkBite Connection System is an instant push-fit connection that connects copper tubing, CTS CPVC and PEX pipe in an combination - no soldering, clamps, unions or glue required. Certified to 200 PSI and 200DegF. Compact, robust DZR brass body. Foundation of a strong, corrosion resistant, durable fitting. Design certified to ANSI/NSF-61 and ASSE 1061 product standard for use in potable water and hydronic heating water distribution.Approved to be used underground and behind walls without access panels. Lead Free Complaint.
Sharkbite 23037-0000LF 1/4 Turn Straight Stop Valve Sharkbite 23048-0000LF 1/4 Turn Angle Stop Valve