Home > PLUMBING > ROUGH PLUMBING SUPPLIES > TUBING > FLAIR IT TUBING
Sort By:
1
Genova Products 71115 PVC-DWV Sanitary Tee Genova 60130 PVC-DWV Fitting Genova Products 71120 PVC-DWV Sanitary Tee
Used when connecting a branch line into vertical drain pipe (stack). Specially made to be used inside a 2" x 4" stud wall construction. Use in drain-waste-vent applications to join straight lengths of pipe. Used when connecting a branch line into vertical drain pipe (stack).
Genova Products 71121 PVC-DWV Sanitary Tee Genova 71123 PVC-DWV Fitting Genova 700 Dwv Pipe Cap
Used when connecting a branch line into a vertical drain pipe (stack). Used when connecting a branch line into a vertical drain pipe (stack). Used for permanently or temporarily capping pipe in drain-waste-vent applications.
Genova 700 Solvent Weld Dwv Pipe Wye Genova 700 Solvent Weld Dwv Pipe Wye Genova 71416 PVC-DWV Fitting
Used when connecting a branch line into a horizontal drain pipe. Also can be used in conjunction with a Twist-Lok plug to provide a cleanout in a drain pipe. Used when connecting a branch line into a horizontal drain pipe. Also can be used in conjunction with a Twist-Lok plug to provide a cleanout in a drain pipe. Used in conjunction with a threaded plug to provide a cleanout opening. Teflon thread tape is recommended for threaded joints.
Genova 60630 PVC-DWV Fitting Genova 73515 PVC-DWV Fitting Genova 700 Dwv Pipe Cap
Used to change direction in piping inside a 2" x 4" stud wall construction for drain-waste-vent applications. Sometimes called an eighth bend. Used to bring two branch lines into a vertical drain pipe (stack). Used for permanently or temporarily capping pipe in drain-waste-vent applications.
Genova 71421 PVC-DWV Fitting Genova 600 Solvent Weld Pipe Reducing Bushing NDS BDM-0500-T Boiler Drains
Used in conjunction with a threaded plug to provide a cleanout opening. Teflon thread tape is recommended for threaded joints. Inserts into fitting hub to reduce to smaller pipe size. For use inside a 2" x 4" stud wall construction in drain-waste-vent applications. For hot and cold fluid systems up to 180 degrees Fahrenheit. Non-corroding, heavy-duty Calcon construction for use with corrosive fluids. Bronze color body with red wheel handle. Santoprene seal for chemical resistance. Complies with all applicable ASTM and ANSI standards. IAPMO and NSF Listed.
Genova 700 Solvent Weld Dwv Pipe Reducing Wye Genova 71122 PVC-DWV Fitting Genova 700 Combination Solvent Weld Pipe Tee-Wye
Used when connecting a reducing branch line into a horizontal drain pipe. Also, can be used in conjunction with a Twist-Lok plug to provide a cleanout in a drain pipe. Used when connecting a branch line into a vertical drain pipe (stack). Required in some plumbing code areas to connect branch line into a vertical drain pipe instead of conventional tee fitting. Also used to connect horizontal branch pipe approaching a horizontal drain pipe on the perpendicular. (Can be made from a wye and street eighth bend.)
NDS BDM-0750-T Boiler Drains Genova 700 Combination Solvent Weld Pipe Tee-Wye Celcon SFT-0500-T Hose Bibb
For hot and cold fluid systems up to 180 degrees Fahrenheit. Non-corroding, heavy-duty Calcon construction for use with corrosive fluids. Bronze color body with red wheel handle. Santoprene seal for chemical resistance. Complies with all applicable ASTM and ANSI standards. IAPMO and NSF Listed. Required in some plumbing code areas to connect branch line into a vertical drain pipe instead of conventional tee fitting. Also used to connect horizontal branch pipe approaching a horizontal drain pipe on the perpendicular. (Can be made from a wye and street eighth bend.) Bronze colored body with black t-handle. Santoprene seal for chemical resistance. For use in hot or cold fluid systems up to 180 degrees Fahrenheit. Complies with all applicable ASTM and ANSI standards.
B&K Proline Solvent Stop Valve Genova Products 71130 PVC-DWV Sanitary Tee Celcon SFT-0750-T Hose Bibb
CPVC construction. For use with hot or cold water. Rated for 100 PSI at 180 degrees Fahrenheit. Not for use with compressed air. Solvent connection for use with CPVC tubing size pipe. Solvent ends comply with ASTM 2846. Certified to NSF 61. Used when connecting a branch line into vertical drain pipe (stack). Bronze colored body with black t-handle. Santoprene seal for chemical resistance. For use in hot or cold fluid systems up to 180 degrees Fahrenheit. Complies with all applicable ASTM and ANSI standards.
B&K Proline Solvent Stop Valve Genova Products 71131 PVC-DWV Sanitary Tee Genova 700 Dwv Reducing Double Sanitary Tee
CPVC construction. For use with hot or cold water. Rated for 100 PSI at 180 degrees Fahrenheit. Not for use with compressed air. Solvent connection for use with CPVC tubing size pipe. Solvent ends comply with ASTM 2846. Certified to NSF 61. Used when connecting a branch line into a vertical drain pipe (stack). Used to bring two reducing branch lines into a vertical drain pipe (stack).
Genova Products 71132 PVC-DWV Sanitary Tee Genova 600 Dwv Pipe Cap Genova 700 Dwv Pipe Cap
Used when connecting a branch line into a vertical drain pipe (stack). Used for permanently or temporarily capping pipe inside a 2" x 4" stud wall construction in drain-waste-vent applications. Used for permanently or temporarily capping pipe in drain-waste-vent applications.
Flair-It 16050 Flexpex Pex Tubing Genova 700 Dwv Double Sanitary Tee Genova 700 Solvent Weld Dwv Pipe Reducing Wye
Cross-link polyethylene tubing rated SDR9 PEX-a B137.5 Potable. NSF Listed. ASTM F876/F877. 160 PSI at 73.4 degrees Fahrenheit, 100 PSI at 180 degrees, 80 PSI at 200 degrees. With blue markings. Bar coded. Used to bring two branch lines into a vertical drain pipe (stack). Used when connecting a reducing branch line into a horizontal drain pipe. Also, can be used in conjunction with a Twist-Lok plug to provide a cleanout in a drain pipe.
Flair-It 16051 Flexpex Genova 500 Straight Supply Line Valve Genova 700 Solvent Weld Dwv Pipe Wye
Cross-link polyethylene tubing rated SDR9 PEX-a B137.5 Potable. NSF Listed. ASTM F876/F877. 160 PSI at 73.4 degrees Fahrenheit, 100 PSI at 180 degrees, 80 PSI at 200 degrees. With blue markings. Bar coded. High-temperature thermoplastics designed to be solvent welded to tubing size CPVC piping for hot and cold water. Employs the globe valve principle and the Street/Socket feature which allows use with 1/2", 3/4", and 1" CPVC tubing (Requires couplings for attaching to 3/4" or 1" tubing). Bulk. Used when connecting a branch line into a horizontal drain pipe. Also can be used in conjunction with a Twist-Lok plug to provide a cleanout in a drain pipe.
Genova 700 Solvent Weld Dwv Pipe Reducing Wye B K Industries 102-003 Boiler Drains Genova 700 Solvent Weld Dwv Pipe Double Wye
Used when connecting a reducing branch line into a horizontal drain pipe. Also, can be used in conjunction with a Twist-Lok plug to provide a cleanout in a drain pipe. Rising stem, six-point cast-iron handle, 3/4" hose thread outlet, complies with ASME A112.18.1, threaded ends comply with ANSI B1.20.1. hose threads comply with ANSI B1.20.7, certified to NSF 61. Used to bring two branch lines into a horizontal drain pipe in drain-waste-vent applications.
Genova 71431 PVC-DWV Fitting B K Industries 102-103 Boiler Drains B K Industries 102-004 Boiler Drains
Used in conjunction with a threaded plug to provide a cleanout opening. Teflon thread tape is recommended for threaded joints. Neoprene seal disc. 3/4" male hose thread. Pipe threads comply with ANSI B1.20.1; hose threads comply with ANSI B1.20.7. Rising stem certified to NSF 61. Rising stem, six-point cast-iron handle, 3/4" hose thread outlet, complies with ASME A112.18.1, threaded ends comply with ANSI B1.20.1. hose threads comply with ANSI B1.20.7, certified to NSF 61.
B & K 102-303 No-Kink Hose Bibb Genova 500 Supply Line Valve Kbi/King BDC-0500-S Ever Tuff
For use with water or oil. multi-turn operation, 3/4" hose thread outlet, large flow area, threaded ends comply with ANSI B1.20.1, hose threads comply with ANSI B1.20.7. High-temperature thermoplastics designed to be solvent welded to tubing size CPVC piping for hot and cold water. Employs the globe valve principle and the Street/Socket feature which allows use with 1/2", 3/4", and 1" CPVC tubing (Requires couplings for attaching to 3/4" or 1" tubing). Bulk. High-impact CPVC construction for use in hot or cold fluid systems up to 180 degrees F. Use with water and approved chemicals. 1/2" MHT outlet. Beige color body with red wheel handle. tpe seal for chemical resistance and long life. Polypropylene handle and stem. Tapered valve seat allows precise flow adjustment. Complies with all applicable ASTM and ANSI standards.
B & K 102-403 No-Kink Hose Bibb B & K 102-304 No-Kink Hose Bibb Genova 700 Combination Solvent Weld Pipe Reducing Tee/Wye
For use with water or oil, multi-turn operation, 3/4" hose thread outlet, threaded ends comply with ANSI B1.20.1, hose threads comply with ANSI B1.20.7 For use with water or oil. multi-turn operation, 3/4" hose thread outlet, large flow area, threaded ends comply with ANSI B1.20.1, hose threads comply with ANSI B1.20.7. Required in some plumbing code areas to connect a branch line into a vertical drain pipe (stack) instead of a conventional tee fitting. Also used to connect a horizontal branch pipe approaching a horizontal drain pipe on the perpendicular.
Genova 600 Solvent Weld Dwv Pipe Reducing Wye KBI/King BDC-0750-S Flowguard Gold Boiler Drains B & K QuarterMaster No-Kink Hose Bibb
Used when connecting a branch line into a horizontal drain pipe. Also, used in conjunction with a Twist-Lok plug to provide a cleanout in a drain pipe. High-impact CPVC construction for use in hot or cold fluid systems up to 180 degrees F. Use with water and approved chemicals. 1/2" MHT outlet. Beige color body with red wheel handle. tpe seal for chemical resistance and long life. Polypropylene handle and stem. Tapered valve seat allows precise flow adjustment. Complies with all applicable ASTM and ANSI standards. Easy quarter turn on/off operation regulates water flow from a trickle to wide open. Compact, low-lead compliant, operates easily for long life. Large flow rate for use as any general-purpose hose connection outlet for external water service. 60% copper alloy brass construction with chrome-plated brass ball, Teflon seats, and rust-resistant handle. 125 PSI max working pressure. 3/4" hose thread outlet. IAPMO ANSI/NSF 61 Approved. Pipe threads comply with ANSI B1.20.1; hose threads comply with ANSI B1.20.7. Handy carton: bin box display packaging; each valve has a data tag with installation instructions and is bar-coded for easy identification. Carton
B K Industries 102-104 Boiler Drains B & K 103-003 Hose Bibb Genova 62830 PVC/DWV Fitting
Neoprene seal disc. 3/4" male hose thread. Pipe threads comply with ANSI B1.20.1; hose threads comply with ANSI B1.20.7. Rising stem certified to NSF 61. 3/4" hose thread outlet, threaded  ends comply with ANSI B1.20.1, hose threads comply with ANSI B1.20.7 Used to change direction in piping. Sometimes call a "quarter bend".
Genova 600 Solvent Weld Dwv Pipe Wye Genova 700 Solvent Weld Dwv Pipe Double Wye B & K 103-003 Hose Bibb
Used when connecting a branch line into a horizontal drain pipe. Also, used in conjunction with a Twist-Lok plug to provide a cleanout in a drain pipe. Used to bring two branch lines into a horizontal drain pipe in drain-waste-vent applications. 3/4" hose thread outlet, threaded  ends comply with ANSI B1.20.1, hose threads comply with ANSI B1.20.7
Genova 600 Solvent Weld Pipe Reducing Bushing B & K 102-404 No-Kink Hose Bibb B&K Proline Stop Valve
Inserts into fitting hub to reduce to smaller pipe size. For use inside a 2" x 4" stud wall construction in drain-waste-vent applications. For use with water or oil, multi-turn operation, 3/4" hose thread outlet, threaded ends comply with ANSI B1.20.1, hose threads comply with ANSI B1.20.7 Rising stem, six-point cast-iron handle, solder ends comply with ANSI B16.18, certified to NSF 61-G.
B & K QuarterMaster No-Kink Hose Bibb B and K Industries 102-703HN Boiler Drains B K Industries 102-053HN Quarter Master
Easy quarter turn on/off operation regulates water flow from a trickle to wide open. Compact, low-lead compliant, operates easily for long life. Large flow rate for use as any general-purpose hose connection outlet for external water service. 60% copper alloy brass construction with chrome-plated brass ball, Teflon seats, and rust-resistant handle. 125 PSI max working pressure. 3/4" hose thread outlet. IAPMO-ansi/ nsf 61-9 Approved. Pipe threads comply with ANSI B1.20.1; hose threads comply with ANSI B1.20.7. Handy carton: bin box display packaging; each valve has a data tag with installation instructions and is bar-coded for easy identification. Carton Rising stem, neoprene seal washer, 3/4" hose thread outlet, cast iron handle. Theaded ends comply with ANSI B1.20.1. Hose threads comply with ANSI B1.20.7, colde ends comply with ANSI B16.18. Easy quarter turn on/off operation regulates water flow from a trickle to wide open. Compact, low-lead compliant, operates easily for long life. Large flow rate for use as any general-purpose hose connection outlet for external water service. 60% copper alloy brass construction with chrome-plated brass ball, Teflon seats, and rust-resistant handle. 125 PSI max working pressure. 3/4" hose thread outlet. IAPMO NSI/NSF 61 Approved. Pipe threads comply with ANSI B1.20.1; hose threads comply with ANSI B1.20.7; solder (sweat) ends comply with ANSI-B16.18. Handy carton: bin box display packaging; each valve has a data tag with installation instructions and is bar-coded for easy identification. Carton
Flair-It 16052 Flexpex Pex Tubing B and K 102-803HC Boiler Drains B & K QuarterMaster No-Kink Hose Bibb
Cross-link polyethylene tubing rated SDR9 PEX-a B137.5 Potable. NSF Listed. ASTM F876/F877. 160 PSI at 73.4 degrees Fahrenheit, 100 PSI at 180 degrees, 80 PSI at 200 degrees. With blue markings. Bar coded. Rising stem, six-point cast iron lhandle, 3/4" hose thread ourlet. Threaded ends comply with ANSI B1.20.1. Hose threads comply with ANSI B1.20.7. Easy quarter turn on/off operation regulates water flow from a trickle to wide open. Compact, low-lead compliant, operates easily for long life. Large flow rate for use as any general-purpose hose connection outlet for external water service. 60% copper alloy brass construction with chrome-plated brass ball, Teflon seats, and rust-resistant handle. 125 PSI max working pressure. 3/4" hose thread outlet. IAPMO ANSI/NSF 61 Approved. Pipe threads comply with ANSI B1.20.1; hose threads comply with ANSI B1.20.7. Handy carton: bin box display packaging; each valve has a data tag with installation instructions and is bar-coded for easy identification. Carton
B & K QuarterMaster No-Kink Hose Bibb Genova 700 Dwv Pipe Cap Genova 700 Dwv Reducing Double Sanitary Tee
Easy quarter turn on/off operation regulates water flow from a trickle to wide open. Compact, low-lead compliant, operates easily for long life. Large flow rate for use as any general-purpose hose connection outlet for external water service. 60% copper alloy brass construction with chrome-plated brass ball, Teflon seats, and rust-resistant handle. 125 PSI max working pressure. 3/4" hose thread outlet. IAPMO-ansi/ nsf 61-9 Approved. Pipe threads comply with ANSI B1.20.1; hose threads comply with ANSI B1.20.7. Handy carton: bin box display packaging; each valve has a data tag with installation instructions and is bar-coded for easy identification. Carton Used for permanently or temporarily capping pipe in drain-waste-vent applications. Used to bring two reducing branch lines into a vertical drain pipe (stack).
B & K QuarterMaster Hose Bibb PEX VALVE STRAIGHT STOP 1/2IN B and K Industries 102-704HC Boiler Drains
Easy quarter turn on/off operation regulates water flow from a trickle to wide open. Compact, low-lead compliant, operates easily for long life. Large flow rate for use as any general-purpose hose connection outlet for external water service. 60 percent copper alloy brass construction with chrome-plated brass ball, Teflon seats, and rust-resistant handle. 125 PSI max working pressure. 3/4" hose thread outlet. IAPMO NSI/NSF 61 Approved. Pipe threads comply with ANSI B1.20.1; hose threads comply with ANSI B1.20.7. Handy carton: bin box display packaging; each valve has a data tag with installation instructions and is bar-coded for easy identification. Carton. Use to install shutoff in straight pipe run.  Made of PPSU (polysulfone). Works on all Brands of PEX Pipe. Install with pliers remove with screwdriver. No special crimp tool needed. cNSF-14,?cNSF-61, CSA compliant. Fittings and rings included in each bag. Temperature approvals 180 Deg. F at 100 P.S.I. Patent Pending Rising stem, neoprene seal washer, 3/4" hose thread outlet, cast iron handle. Theaded ends comply with ANSI B1.20.1. Hose threads comply with ANSI B1.20.7, colde ends comply with ANSI B16.18.
Genova Products 71140 PVC-DWV Sanitary Tee B and K Industries 102-054HN Quarter Master B & K 103-013 Hose Bibb
Used when connecting a branch line into vertical drain pipe (stack). Easy quarter turn on/off operation regulates water flow from a trickle to wide open. Compact, low-lead compliant, operates easily for long life. Large flow rate for use as any general-purpose hose connection outlet for external water service. 60% copper alloy brass construction with chrome-plated brass ball, Teflon seats, and rust-resistant handle. 125 PSI max working pressure. 3/4" hose thread outlet. IAPMO NSI/NSF 61 Approved. Pipe threads comply with ANSI B1.20.1; hose threads comply with ANSI B1.20.7; solder (sweat) ends comply with ANSI-B16.18. Handy carton: bin box display packaging; each valve has a data tag with installation instructions and is bar-coded for easy identification. Carton Neoprene seal washer, 3/4" hose thread outlet, high flow rate capability, threaded ends comply with ANSI B1.20.1, hose threads comply with ANSI B1.20.7, certified to NSF 61.
Watts P-450 Quick Connect Straight Stop Valve Genova 700 Solvent Weld Dwv Pipe Reducing Wye B and K 102-804HC Boiler Drains
Works with copper, CPVC, Pex, LPDE, MPDE, HDPE and polybutylene tubing in hot and cold water applications. Incorporates stainless steel gripping teeth in the collets, allowing the connectors to interconnect with multiple materials without special tools or tube inserts. Exclusive O-ring guide insures zero-leak connections. Tube orientation can be changed by a simple twist, reducing the amount of tubing required to plumb a water system. Reusable, approved for use behind walls and underground. Polybagged Used when connecting a reducing branch line into a horizontal drain pipe. Also, can be used in conjunction with a Twist-Lok plug to provide a cleanout in a drain pipe. Rising stem, six-point cast iron lhandle, 3/4" hose thread ourlet. Threaded ends comply with ANSI B1.20.1. Hose threads comply with ANSI B1.20.7.
Watts P-650 Quick Connect Straight Stop Valve Genova 73532 PVC-DWV Fitting B & K 103-014 Hose Bibb
Works with copper, CPVC, Pex, LPDE, MPDE, HDPE and polybutylene tubing in hot and cold water applications. Incorporates stainless steel gripping teeth in the collets, allowing the connectors to interconnect with multiple materials without special tools or tube inserts. Exclusive O-ring guide insures zero-leak connections. Tube orientation can be changed by a simple twist, reducing the amount of tubing required to plumb a water system. Reusable, approved for use behind walls and underground. Polybagged Used to bring two reducing branch lines into a vertical drain pipe (stack). Neoprene seal washer, 3/4" hose thread outlet, high flow rate capability, threaded ends comply with ANSI B1.20.1, hose threads comply with ANSI B1.20.7, certified to NSF 61.
Genova 79230 Dwv Floor Strainer Watts PL-3012 Push-Fit Quick Connect Straight Stop Valve B & K QuarterMaster Hose Bibb
Prevents debris from entering a drain opening on the floor. Fits flush into any fitting hub flush to the floor. Plastic quick connect fittings are made from polysulfone, a high performance thermal plastic material. Design allows for quick and easy connections to pipe without installation tool. Use on copper, pex, CPVC and polybutylene pipe. Product meets all National Plumbing Codes. Easy quarter turn on/off operation regulates water flow from a trickle to wide open. Compact, low-lead compliant, operates easily for long life. Large flow rate for use as any general-purpose hose connection outlet for external water service. 60 percent copper alloy brass construction with chrome-plated brass ball, Teflon seats, and rust-resistant handle. 125 PSI max working pressure. 3/4" hose thread outlet. IAPMO NSI/NSF 61 Approved. Pipe threads comply with ANSI B1.20.1; hose threads comply with ANSI B1.20.7. Handy carton: bin box display packaging; each valve has a data tag with installation instructions and is bar-coded for easy identification. Carton.
Genova 700 Combination Solvent Weld Pipe Tee-Wye B&K Proline Stop Valve B and K 102-033 Boiler Drains
Required in some plumbing code areas to connect a branch line into vertical drain pipe instead of conventional tee fitting. Also used to connect a horizontal branch pipe approaching a horizontal drain pipe on the perpendicular. (Can be made from a wye and a street eighth bend.) Rising stem, six-point cast-iron handle, solder ends comply with ANSI B16.18, certified to NSF 61-G. For 5/8" OD Tubing with stuffing box. Neoprene seal disc, 3/4" hose thread outlet, cast iron handle. Hose threads comply with ANSI B1.20.1, rising stem certified to NSF 61.
Genova 71141 PVC-DWV Fitting Watts PL-3042 Push-Fit Quick Connect Straight Stop Valve B and K 102-013 Boiler Drains
Used when connecting a branch line into a vertical drain pipe (stack). Plastic quick connect fittings are made from polysulfone, a high performance thermal plastic material. Design allows for quick and easy connections to pipe without installation tool. Use on copper, pex, CPVC and polybutylene pipe. Product meets all National Plumbing Codes. 3/4" hose threaded outlet, cast iron handle. Meets NSF/ANSI 61-9. Nose threads comply to ANSI B1.20.7.
B&K Proline Stop Valve Watts PL-3041 Push-Fit Quick Connect Straight Stop Valve Genova 700 Solvent Weld Dwv Pipe Reducing Wye
125 PSI WOG,  Rising stem, six-point cast-iron handle, threaded ends comply with ANSI B1.20.1, CSA certified, certified to NSF 61-G. Plastic quick connect fittings are made from polysulfone, a high performance thermal plastic material. Design allows for quick and easy connections to pipe without installation tool. Use on copper, pex, CPVC and polybutylene pipe. Product meets all National Plumbing Codes.. Used when connecting a reducing branch line into a horizontal drain pipe. Also, can be used in conjunction with a Twist-Lok plug to provide a cleanout in a drain pipe.
B and K 102-014 Boiler Drains Watts PL-3011 Push-Fit Quick Connect Straight Stop Valve Genova 700 Combination Solvent Weld Pipe Reducing Tee/Wye
3/4" hose threaded outlet, cast iron handle. Meets NSF/ANSI 61-9. Nose threads comply to ANSI B1.20.7. Plastic quick connect fittings are made from polysulfone, a high performance thermal plastic material. Design allows for quick and easy connections to pipe without installation tool. Use on copper, pex, CPVC and polybutylene pipe. Product meets all National Plumbing Codes.. Required in some plumbing code areas to connect a branch line into a vertical drain pipe (stack) instead of a conventional tee fitting. Also used to connect a horizontal branch pipe approaching a horizontal drain pipe on the perpendicular.
Genova Products 71142 PVC-DWV Reducing Sanitary Tee Flair-It 16879 Straight Stop Valve PEX VALVE MANIFOLD 1/2IN
Used when connecting a branch line into a vertical drain pipe (stack). For hot or cold water In-line valve with PEX connections on both ends. Bar coded. Made of PPSU (polysulfone). Works on all Brands of PEX Pipe. Install with pliers remove with screwdriver. No special crimp tool needed. cNSF-14,?cNSF-61, CSA compliant. Fittings and rings included in each bag. Temperature approvals 180 Deg. F at 100 P.S.I. Approved for behind the wall and underground applications. Patent Pending.
PEX VALVE MANIFOLD RED 1/2IN  PEX VALVE MANIFOLD BLK 1/2IN  B&K Proline Stop Valve
Made of PPSU (polysulfone). Works on all Brands of PEX Pipe. Install with pliers remove with screwdriver. No special crimp tool needed. cNSF-14,?cNSF-61, CSA compliant. Fittings and rings included in each bag. Temperature approvals 180 Deg. F at 100 P.S.I. Approved for behind the wall and underground applications. Patent Pending. Made of PPSU (polysulfone). Works on all Brands of PEX Pipe. Install with pliers remove with screwdriver. No special crimp tool needed. cNSF-14,?cNSF-61, CSA compliant. Fittings and rings included in each bag. Temperature approvals 180 Deg. F at 100 P.S.I. Approved for behind the wall and underground applications. Patent Pending. 125 PSI WOG,  Rising stem, six-point cast-iron handle, threaded ends comply with ANSI B1.20.1, CSA certified, certified to NSF 61-G.
Genova 700 Solvent Weld Dwv Pipe Wye Genova 600 Reducing DWV Sewer Pipe Adapter Flair-It 16880 Straight Stop Valve
Used when connecting a branch line into a horizontal drain pipe. Also can be used in conjunction with a Twist-Lok plug to provide a cleanout in a drain pipe. Adapts 3" Schedule 30 pipe to 4" sewer pipe inside a 2" x 4" stud wall construction in drain-waste-vent applications. For hot or cold water In-line valve with PEX connections on both ends. Bar coded.
Genova Products 71143 PVC-DWV Reducing Sanitary Tee Genova 71441 PVC-DWV Fitting Watts P-866 Quick Connect Straight Stop Valve
Used when connecting a branch line into a vertical drain pipe (stack). Used in conjunction with a threaded plug to provide a cleanout opening. Teflon thread tape is recommended for threaded joints. Works with copper, CPVC, Pex, LPDE, MPDE, HDPE and polybutylene tubing in hot and cold water applications. Incorporates stainless steel gripping teeth in the collets, allowing the connectors to interconnect with multiple materials without special tools or tube inserts. Exclusive O-ring guide insures zero-leak connections. Tube orientation can be changed by a simple twist, reducing the amount of tubing required to plumb a water system. Reusable, approved for use behind walls and underground. Polybagged
B & K 103-023 Hose Bibb B and K 102-034 Boiler Drains Genova 79240 Dwv Floor Strainer
200 PSI water, oil or gas. 1/4-turn operation. Large flow rate. Chrome plated brass ball. 3/4" hose outlet. Pipe thread complies with ANSI B1.20.1. Hose threads comply with ANSI B1.20.7. UPC coded bulk. For 5/8" OD Tubing with stuffing box. Neoprene seal disc, 3/4" hose thread outlet, cast iron handle. Hose threads comply with ANSI B1.20.1, rising stem certified to NSF 61. Prevents debris from entering a drain opening on the floor. Fits flush into any fitting hub flush to the floor.
B&K Proline 1/4 Turn Straight Stop Valve Genova 700 Dwv Double Sanitary Tee PEX VALVE ANGLE 1/2IN
PEX VALVE ANGLE 1/2IN
Our Price: $12.02
ASGE 1061, PSF 61 approved, cUPC, IAPMO listed, NSF/ANSI 61, AB1953 compliant. Used to bring two branch lines into a vertical drain pipe (stack). Use to install shutoff in supply line. Made of PPSU (polysulfone). Works on all Brands of PEX Pipe. Install with pliers remove with screwdriver. No special crimp tool needed. cNSF-14,?cNSF-61, CSA compliant. Fittings and rings included in each bag. Temperature approvals 180 Deg. F at 100 P.S.I. Patent Pending
PEX VALVE 3W 1/2X1/2X1/2IN    Arrowhead 301 Standard Hose Bibb Arrowhead 253 No-Kink Hose Bibb
Use to bypass flow to water heaters and softeners. Made of PPSU (polysulfone). Works on all Brands of PEX Pipe. Install with pliers remove with screwdriver. No special crimp tool needed. cNSF-14,?cNSF-61, CSA compliant. Fittings and rings included in each bag. Temperature approvals 180 Deg. F at 100 P.S.I. Approved for behind the wall and underground applications. Patent Pending. Features heavy pattern rough brass, 1-piece O-ring bonnet, and coated tee handle. Straight short shank. Features heavy pattern rough brass, 1-piece O-ring bonnet, and coated tee handle.
PEX VALVE BYPASS 1/2IN        PEX VALVE CENTER DRN 3WY 1/2IN PEX BYPASS 1/2X1/2MPTX1/2IN
PEX VALVE BYPASS 1/2IN
Our Price: $12.77
Use to bypass flow for water heaters & softeners. Made of PPSU (polysulfone). Works on all Brands of PEX Pipe. Install with pliers remove with screwdriver. No special crimp tool needed. cNSF-14,?cNSF-61, CSA compliant. Fittings and rings included in each bag. Temperature approvals 180 Deg. F at 100 P.S.I. Patent Pending Made of PPSU (polysulfone). Works on all Brands of PEX Pipe. Install with pliers remove with screwdriver. No special crimp tool needed. cNSF-14,?cNSF-61, CSA compliant. Fittings and rings included in each bag. Temperature approvals 180 Deg. F at 100 P.S.I. Patent Pending Use to bypass flow for water heaters & softeners. Made of PPSU (polysulfone). Works on all Brands of PEX Pipe. Install with pliers remove with screwdriver. No special crimp tool needed. cNSF-14,?cNSF-61, CSA compliant. Fittings and rings included in each bag. Temperature approvals 180 Deg. F at 100 P.S.I. Patent Pending
Arrowhead Brass 221BCLD Boiler Drains Arrowhead 302 Standard Hose Bibb Arrowhead 353 No-Kink Hose Bibb
Features heavy pattern rough brass, 1-piece O-ring bonnet, and coated wheel handle. Features heavy pattern rough brass, 1-piece O-ring bonnet, and coated tee handle. Straight short shank. Features heavy pattern rough brass, 1-piece O-ring bonnet, and coated tee handle.
Arrowhead 351 No-Kink Hose Bibb Genova 700 Solvent Weld Dwv Pipe Double Wye Arrowhead Brass 222BCLD Boiler Drains
Features heavy pattern rough brass, 1-piece O-ring bonnet, and coated tee handle. Used to bring two branch lines into a horizontal drain pipe in drain-waste-vent applications. Features heavy pattern rough brass, 1-piece O-ring bonnet, and coated wheel handle.
Arrowhead Brass 223BCLD Boiler Drains Genova 700 Combination Solvent Weld Pipe Reducing Tee/Wye Genova 700 Combination Solvent Weld Pipe Reducing Tee/Wye
Features heavy pattern rough brass, 1-piece O-ring bonnet, and coated wheel handle. Required in some plumbing code areas to connect a branch line into a vertical drain pipe (stack) instead of a conventional tee fitting. Also used to connect a horizontal branch pipe approaching a horizontal drain pipe on the perpendicular. Required in some plumbing code areas to connect a branch line into a vertical drain pipe (stack) instead of a conventional tee fitting. Also used to connect a horizontal branch pipe approaching a horizontal drain pipe on the perpendicular.
Genova Products 71633 PVC-DWV Cleanout Tee Genova 700 Combination Solvent Weld Pipe Tee/Wye B&K Proline 1/4 Turn Straight Stop Valve
Used with a vertical pipe stack to provide for above ground level access to piping. Required in some plumbing code areas to connect a branch line into vertical drain pipe instead of conventional tee fitting. Also used to connect a horizontal branch pipe approaching a horizontal drain pipe on the perpendicular. (Can be made from a wye and a street eighth bend.) ASGE 1061, PSF 61 approved, cUPC, IAPMO listed, NSF/ANSI 61, AB1953 compliant.
B & K 103-024 Hose Bibb Genova 700 Solvent Weld Dwv Pipe Reducing Wye Genova 77031 PVC-DWV Fitting
200 PSI water, oil or gas. 1/4-turn operation. Large flow rate. Chrome plated brass ball. 3/4" hose outlet. Pipe thread complies with ANSI B1.20.1. Hose threads comply with ANSI B1.20.7. UPC coded bulk. Used when connecting a reducing branch line into a horizontal drain pipe. Also, can be used in conjunction with a Twist-Lok plug to provide a cleanout in a drain pipe. Provides for the connection of 1-1/2" or 2" vent or branch waste piping to a vertical pipe as well as receiving the discharge of a water closet. The inlets are constructed to accept a 2" fitting hub over their outside diameter or an 1-1/2" pipe into their inside diameter.
PEX VALVE STRAIGHT STOP 3/4IN Arrowhead 201 Shank-On Thread Hose Bibb Genova 700 Dwv Pipe Cap
Use to install shutoff in straight pipe run.  Made of PPSU (polysulfone). Works on all Brands of PEX Pipe. Install with pliers remove with screwdriver. No special crimp tool needed. cNSF-14,?cNSF-61, CSA compliant. Fittings and rings included in each bag. Temperature approvals 180 Deg. F at 100 P.S.I. Patent Pending Features heavy pattern rough brass, 1-piece O-ring bonnet, and coated tee handle. Straight on taper. Used for permanently or temporarily capping pipe in drain-waste-vent applications.
Arrowhead 202 Shank-On Thread Standard Hose Bibb Genova Products 71644 PVC-DWV Cleanout Tee Genova 73542 PVC-DWV Fitting
Features heavy pattern rough brass, 1-piece O-ring bonnet, and coated tee handle. Straight on taper. Used with a vertical pipe stack to provide for above ground level access to piping. Used to bring two reducing branch lines into a vertical drain pipe (stack).
Genova 700 Dwv Double Sanitary Tee Genova 73440 PVC-DWV Fitting Genova 77042 PVC-DWV Fitting
Used to bring two branch lines into a vertical drain pipe (stack). Used to bring two branch lines into a horizontal drain pipe in drain-waste-vent applications. Provides for the connection of 1-1/2" or 2" vent or branch waste piping to a vertical pipe as well as receiving the discharge of a water closet.
Genova 700 Solvent Weld Dwv Pipe Wye Genova 71160 PVC-DWV Fitting Genova 77630 Backwater Valve
Used when connecting a branch line into a horizontal drain pipe. Also can be used in conjunction with a Twist-Lok plug to provide a cleanout in a drain pipe. Used when connecting a branch line into vertical drain pipe (stack). Solvent welds directly into PVC-DWV pipe without the need for adapters. Full size cleanout/maintenance port provided. Helps prevent sewage backup during flood conditions.
Genova 77640 Backwater Valve Flair-It 16062 Flexpex Pex Tubing Flair-It 16063 Flexpex Pex Tubing
Solvent welds directly into PVC-DWV pipe without the need for adapters. Full size cleanout/maintenance port provided. Helps prevent sewage backup during flood conditions. Cross-link polyethylene tubing rated SDR9 PEX-a B137.5 Potable. NSF Listed. ASTM F876/F877. 160 PSI at 73.4 degrees Fahrenheit, 100 PSI at 180 degrees, 80 PSI at 200 degrees. With blue markings. Cross-link polyethylene tubing rated SDR9 PEX-a B137.5 Potable. NSF Listed. ASTM F876/F877. 160 PSI at 73.4 degrees Fahrenheit, 100 PSI at 180 degrees, 80 PSI at 200 degrees. With blue markings.
Flair-It 16064 Flexpex
Cross-link polyethylene tubing rated SDR9 PEX-a B137.5 Potable. NSF Listed. ASTM F876/F877. 160 PSI at 73.4 degrees Fahrenheit, 100 PSI at 180 degrees, 80 PSI at 200 degrees. With blue markings.
   
 
1