Home > PLUMBING > ROUGH PLUMBING SUPPLIES > WATER COOLERS > ICE MAKER KITS & ACCESSORIES
Choose a sub category:
BLACK MERCHANT COUPLING BLACK MERCHANT COUPLING COPPER ADAPTERS-FEMALE
COPPER ADAPTERS-FEMALE BLACK STANDARD PIPE NIPPLE BLACK STANDARD PIPE NIPPLE
COPPER ADAPTERS-MALE COPPER ADAPTERS-MALE BLACK LONG PIPE NIPPLE
BLACK LONG PIPE NIPPLE COPPER REDUCING ADAPTERS-FEM COPPER REDUCING ADAPTERS-FEM
COPPER REDUCING ADAPTERS-MALE COPPER REDUCING ADAPTERS-MALE COPPER FITTING ADAPTERS
COPPER FITTING ADAPTERS COPPER UNIONS COPPER UNIONS
COPPER COUPLINGS COPPER COUPLINGS COPPER FLUSH BUSHINGS
COPPER FLUSH BUSHINGS COPPER FITTING REDUCERS COPPER FITTING REDUCERS
COPPER TUBE CAPS COPPER TUBE CAPS COPPER TEES-WROT
COPPER TEES-WROT COPPER TEES-CAST COPPER TEES-CAST
COPPER 90 DEGREE ELBOWS-WROT COPPER 90 DEGREE ELBOWS-WROT COPPER 45 DEGREE ELBOWS-WROT
COPPER 45 DEGREE ELBOWS-WROT COPPER 90 DEGREE ELBOWS-CAST COPPER 90 DEGREE ELBOWS-CAST
COPPER STUB OUT AIR CHAMBER COPPER STUB OUT AIR CHAMBER
Sort By:
1
Genova 300 Pipe Nipple Genova 300 Pipe Nipple Genova 300 Pipe Nipple
Gray fittings used for sprinkler systems where an extension is needed for the sprinkler head to be above ground level. Also may be used to prevent damage to the sprinkler head. Teflon thread tape is recommended for threaded joints. Gray fittings used for sprinkler systems where an extension is needed for the sprinkler head to be above ground level. Also may be used to prevent damage to the sprinkler head. Teflon thread tape is recommended for threaded joints. Gray fittings used for sprinkler systems where an extension is needed for the sprinkler head to be above ground level. Also may be used to prevent damage to the sprinkler head. Teflon thread tape is recommended for threaded joints.
Genova 300 Pipe Nipple Genova 300 Pipe Nipple Genova 300 Pipe Nipple
Gray fittings used for sprinkler systems where an extension is needed for the sprinkler head to be above ground level. Also may be used to prevent damage to the sprinkler head. Teflon thread tape is recommended for threaded joints. Gray fittings used for sprinkler systems where an extension is needed for the sprinkler head to be above ground level. Also may be used to prevent damage to the sprinkler head. Teflon thread tape is recommended for threaded joints. Gray fittings used for sprinkler systems where an extension is needed for the sprinkler head to be above ground level. Also may be used to prevent damage to the sprinkler head. Teflon thread tape is recommended for threaded joints.
Genova 300 Pipe Nipple Genova 300 Pipe Nipple Genova 300 Pipe Nipple
Gray fittings used for sprinkler systems where an extension is needed for the sprinkler head to be above ground level. Also may be used to prevent damage to the sprinkler head. Teflon thread tape is recommended for threaded joints. Gray fittings used for sprinkler systems where an extension is needed for the sprinkler head to be above ground level. Also may be used to prevent damage to the sprinkler head. Teflon thread tape is recommended for threaded joints. Gray fittings used for sprinkler systems where an extension is needed for the sprinkler head to be above ground level. Also may be used to prevent damage to the sprinkler head. Teflon thread tape is recommended for threaded joints.
Genova 300 Pipe Nipple Genova 300 Pipe Nipple Genova 300 Pipe Nipple
Gray fittings used for sprinkler systems where an extension is needed for the sprinkler head to be above ground level. Also may be used to prevent damage to the sprinkler head. Teflon thread tape is recommended for threaded joints. Gray fittings used for sprinkler systems where an extension is needed for the sprinkler head to be above ground level. Also may be used to prevent damage to the sprinkler head. Teflon thread tape is recommended for threaded joints. Gray fittings used for sprinkler systems where an extension is needed for the sprinkler head to be above ground level. Also may be used to prevent damage to the sprinkler head. Teflon thread tape is recommended for threaded joints.
Genova 700 Dwv Pipe Reducing Bushing Genova 300 Pipe Nipple Genova 300 Pipe Nipple
Inserts into fitting hub to reduce to smaller pipe size in drain-waste-vent applications. Gray fittings used for sprinkler systems where an extension is needed for the sprinkler head to be above ground level. Also may be used to prevent damage to the sprinkler head. Teflon thread tape is recommended for threaded joints. Gray fittings used for sprinkler systems where an extension is needed for the sprinkler head to be above ground level. Also may be used to prevent damage to the sprinkler head. Teflon thread tape is recommended for threaded joints.
Genova 300 Pipe Nipple Genova 300 Pipe Nipple Genova 300 Pipe Nipple
Gray fittings used for sprinkler systems where an extension is needed for the sprinkler head to be above ground level. Also may be used to prevent damage to the sprinkler head. Teflon thread tape is recommended for threaded joints. Gray fittings used for sprinkler systems where an extension is needed for the sprinkler head to be above ground level. Also may be used to prevent damage to the sprinkler head. Teflon thread tape is recommended for threaded joints. Gray fittings used for sprinkler systems where an extension is needed for the sprinkler head to be above ground level. Also may be used to prevent damage to the sprinkler head. Teflon thread tape is recommended for threaded joints.
Genova 300 Pipe Nipple Genova 300 Pipe Nipple Genova 300 Pipe Nipple
Gray fittings used for sprinkler systems where an extension is needed for the sprinkler head to be above ground level. Also may be used to prevent damage to the sprinkler head. Teflon thread tape is recommended for threaded joints. Gray fittings used for sprinkler systems where an extension is needed for the sprinkler head to be above ground level. Also may be used to prevent damage to the sprinkler head. Teflon thread tape is recommended for threaded joints. Gray fittings used for sprinkler systems where an extension is needed for the sprinkler head to be above ground level. Also may be used to prevent damage to the sprinkler head. Teflon thread tape is recommended for threaded joints.
Genova 300 Pipe Nipple Genova Products 71115 PVC-DWV Sanitary Tee Genova 300 Pipe Nipple
Gray fittings used for sprinkler systems where an extension is needed for the sprinkler head to be above ground level. Also may be used to prevent damage to the sprinkler head. Teflon thread tape is recommended for threaded joints. Used when connecting a branch line into vertical drain pipe (stack). Gray fittings used for sprinkler systems where an extension is needed for the sprinkler head to be above ground level. Also may be used to prevent damage to the sprinkler head. Teflon thread tape is recommended for threaded joints.
Genova 300 Pipe Nipple Genova 300 Pipe Nipple Genova 300 Pipe Nipple
Gray fittings used for sprinkler systems where an extension is needed for the sprinkler head to be above ground level. Also may be used to prevent damage to the sprinkler head. Teflon thread tape is recommended for threaded joints. Gray fittings used for sprinkler systems where an extension is needed for the sprinkler head to be above ground level. Also may be used to prevent damage to the sprinkler head. Teflon thread tape is recommended for threaded joints. Gray fittings used for sprinkler systems where an extension is needed for the sprinkler head to be above ground level. Also may be used to prevent damage to the sprinkler head. Teflon thread tape is recommended for threaded joints.
World Wide Sourcing B300 10 Black Pipe Malleable Cap Worldwide Sourcing 18-1/2B Black Pipe Malleable Cap Genova 300 Pipe Nipple
Flat banded, right hand threads. Flat banded, right hand threads. Gray fittings used for sprinkler systems where an extension is needed for the sprinkler head to be above ground level. Also may be used to prevent damage to the sprinkler head. Teflon thread tape is recommended for threaded joints.
Genova 300 Pipe Nipple World Wide Sourcing B300 8 Black Pipe Malleable Cap Genova 300 Pipe Nipple
Gray fittings used for sprinkler systems where an extension is needed for the sprinkler head to be above ground level. Also may be used to prevent damage to the sprinkler head. Teflon thread tape is recommended for threaded joints. Flat banded, right hand threads. Gray fittings used for sprinkler systems where an extension is needed for the sprinkler head to be above ground level. Also may be used to prevent damage to the sprinkler head. Teflon thread tape is recommended for threaded joints.
Genova 300 Pipe Nipple Genova 300 Pipe Nipple Genova 300 Pipe Nipple
Gray fittings used for sprinkler systems where an extension is needed for the sprinkler head to be above ground level. Also may be used to prevent damage to the sprinkler head. Teflon thread tape is recommended for threaded joints. Gray fittings used for sprinkler systems where an extension is needed for the sprinkler head to be above ground level. Also may be used to prevent damage to the sprinkler head. Teflon thread tape is recommended for threaded joints. Gray fittings used for sprinkler systems where an extension is needed for the sprinkler head to be above ground level. Also may be used to prevent damage to the sprinkler head. Teflon thread tape is recommended for threaded joints.
Genova 300 Pipe Nipple Worldwide Sourcing 18-3/4B Black Pipe Cap World Wide Sourcing B300 6 Black Pipe Fitting
Gray fittings used for sprinkler systems where an extension is needed for the sprinkler head to be above ground level. Also may be used to prevent damage to the sprinkler head. Teflon thread tape is recommended for threaded joints. Flat banded, right hand threads. Flat banded, right hand threads.
Genova 300 Pipe Nipple Genova Products 71120 PVC-DWV Sanitary Tee World Wide Sourcing 4-1/2B Black Pipe  Malleable 45 Degree Elbow
Gray fittings used for sprinkler systems where an extension is needed for the sprinkler head to be above ground level. Also may be used to prevent damage to the sprinkler head. Teflon thread tape is recommended for threaded joints. Used when connecting a branch line into vertical drain pipe (stack). Standard screwed, for steam and water working pressure up to 150 pounds. Flat banded, right hand threads.
Genova 300 Pipe Nipple Genova 300 Pipe Nipple Genova 300 Pipe Nipple
Gray fittings used for sprinkler systems where an extension is needed for the sprinkler head to be above ground level. Also may be used to prevent damage to the sprinkler head. Teflon thread tape is recommended for threaded joints. Gray fittings used for sprinkler systems where an extension is needed for the sprinkler head to be above ground level. Also may be used to prevent damage to the sprinkler head. Teflon thread tape is recommended for threaded joints. Gray fittings used for sprinkler systems where an extension is needed for the sprinkler head to be above ground level. Also may be used to prevent damage to the sprinkler head. Teflon thread tape is recommended for threaded joints.
Genova Products 71121 PVC-DWV Sanitary Tee Genova 300 Pipe Nipple World Wide Sourcing BSC 6 Black Pipe Mercfhant Coupling 1/8 In
Used when connecting a branch line into a vertical drain pipe (stack). Gray fittings used for sprinkler systems where an extension is needed for the sprinkler head to be above ground level. Also may be used to prevent damage to the sprinkler head. Teflon thread tape is recommended for threaded joints. WORLDWIDE SOURCING Pipe Merchant Coupling, 1/8 in Nominal Size, Threaded, Steel, Black Oxide
Genova 71123 PVC-DWV Fitting Genova 300 Pipe Nipple Genova 300 Pipe Nipple
Used when connecting a branch line into a vertical drain pipe (stack). Gray fittings used for sprinkler systems where an extension is needed for the sprinkler head to be above ground level. Also may be used to prevent damage to the sprinkler head. Teflon thread tape is recommended for threaded joints. Gray fittings used for sprinkler systems where an extension is needed for the sprinkler head to be above ground level. Also may be used to prevent damage to the sprinkler head. Teflon thread tape is recommended for threaded joints.
World Wide Sourcing BSC 8 Black Pipe Merchant Coupling Genova 300 Pipe Nipple Genova 300 Pipe Nipple
WORLDWIDE SOURCING Pipe Merchant Coupling, 1/4 in Nominal Size, Threaded, Steel, Black Oxide Gray fittings used for sprinkler systems where an extension is needed for the sprinkler head to be above ground level. Also may be used to prevent damage to the sprinkler head. Teflon thread tape is recommended for threaded joints. Gray fittings used for sprinkler systems where an extension is needed for the sprinkler head to be above ground level. Also may be used to prevent damage to the sprinkler head. Teflon thread tape is recommended for threaded joints.
Genova 300 Pipe Nipple World Wide Sourcing BSC 10 Black Pipe Merchant Coupling World Wide Sourcing BSC 15 Black Pipe Merchant Coupling
Gray fittings used for sprinkler systems where an extension is needed for the sprinkler head to be above ground level. Also may be used to prevent damage to the sprinkler head. Teflon thread tape is recommended for threaded joints. WORLDWIDE SOURCING Pipe Merchant Coupling, 3/8 in Nominal Size, Threaded, Steel, Black Oxide WORLDWIDE SOURCING Pipe Merchant Coupling, 1/2 in Nominal Size, Threaded, Steel, Black Oxide
World Wide Sourcing 4-3/4B Black Pipe Malleable 45 Degree Elbow World Wide Sourcing 18-1B Black Pipe Malleable Cap Genova 300 Pipe Nipple
Standard screwed, for steam and water working pressure up to 150 pounds. Flat banded, right hand threads. Flat banded, right hand threads. Gray fittings used for sprinkler systems where an extension is needed for the sprinkler head to be above ground level. Also may be used to prevent damage to the sprinkler head. Teflon thread tape is recommended for threaded joints.
Genova 300 Pipe Nipple BUSHING SPXHUB 1-1/2X1-1/4IN  Genova 700 Dwv Pipe Cap
Gray fittings used for sprinkler systems where an extension is needed for the sprinkler head to be above ground level. Also may be used to prevent damage to the sprinkler head. Teflon thread tape is recommended for threaded joints. Inserts into fitting hub to reduce to smaller pipe size in drain-waste-vent applications. Used for permanently or temporarily capping pipe in drain-waste-vent applications.
Genova 300 Pipe Nipple Genova 300 Pipe Nipple Genova 300 Pipe Nipple
Gray fittings used for sprinkler systems where an extension is needed for the sprinkler head to be above ground level. Also may be used to prevent damage to the sprinkler head. Teflon thread tape is recommended for threaded joints. Gray fittings used for sprinkler systems where an extension is needed for the sprinkler head to be above ground level. Also may be used to prevent damage to the sprinkler head. Teflon thread tape is recommended for threaded joints. Gray fittings used for sprinkler systems where an extension is needed for the sprinkler head to be above ground level. Also may be used to prevent damage to the sprinkler head. Teflon thread tape is recommended for threaded joints.
Genova 700 Solvent Weld Dwv Pipe Wye Genova 700 Solvent Weld Dwv Pipe Wye Genova 300 Pipe Nipple
Used when connecting a branch line into a horizontal drain pipe. Also can be used in conjunction with a Twist-Lok plug to provide a cleanout in a drain pipe. Used when connecting a branch line into a horizontal drain pipe. Also can be used in conjunction with a Twist-Lok plug to provide a cleanout in a drain pipe. Gray fittings used for sprinkler systems where an extension is needed for the sprinkler head to be above ground level. Also may be used to prevent damage to the sprinkler head. Teflon thread tape is recommended for threaded joints.
Genova 700 Dwv Pipe Reducing Bushing Genova 300 Pipe Nipple World Wide Sourcing BSC 20 Black Pipe Merchant Coupling
Inserts into fitting hub to reduce to smaller pipe size in drain-waste-vent applications. Gray fittings used for sprinkler systems where an extension is needed for the sprinkler head to be above ground level. Also may be used to prevent damage to the sprinkler head. Teflon thread tape is recommended for threaded joints. WORLDWIDE SOURCING Pipe Merchant Coupling, 3/4 in Nominal Size, Threaded, Steel, Black Oxide
Genova 300 Pipe Nipple Genova 300 Pipe Nipple Genova 71416 PVC-DWV Fitting
Gray fittings used for sprinkler systems where an extension is needed for the sprinkler head to be above ground level. Also may be used to prevent damage to the sprinkler head. Teflon thread tape is recommended for threaded joints. Gray fittings used for sprinkler systems where an extension is needed for the sprinkler head to be above ground level. Also may be used to prevent damage to the sprinkler head. Teflon thread tape is recommended for threaded joints. Used in conjunction with a threaded plug to provide a cleanout opening. Teflon thread tape is recommended for threaded joints.
Genova 300 Pipe Nipple Genova 300 Pipe Nipple Genova 300 Pipe Nipple
Gray fittings used for sprinkler systems where an extension is needed for the sprinkler head to be above ground level. Also may be used to prevent damage to the sprinkler head. Teflon thread tape is recommended for threaded joints. Gray fittings used for sprinkler systems where an extension is needed for the sprinkler head to be above ground level. Also may be used to prevent damage to the sprinkler head. Teflon thread tape is recommended for threaded joints. Gray fittings used for sprinkler systems where an extension is needed for the sprinkler head to be above ground level. Also may be used to prevent damage to the sprinkler head. Teflon thread tape is recommended for threaded joints.
Genova 300 Pipe Nipple Genova 73515 PVC-DWV Fitting Genova 700 Dwv Pipe Cap
Gray fittings used for sprinkler systems where an extension is needed for the sprinkler head to be above ground level. Also may be used to prevent damage to the sprinkler head. Teflon thread tape is recommended for threaded joints. Used to bring two branch lines into a vertical drain pipe (stack). Used for permanently or temporarily capping pipe in drain-waste-vent applications.
Genova 71421 PVC-DWV Fitting World Wide Sourcing B300 32 Black Pipe Malleable Cap World Wide Sourcing 4-1B Black Pipe  Malleable 45 Degree Elbow
Used in conjunction with a threaded plug to provide a cleanout opening. Teflon thread tape is recommended for threaded joints. Flat banded, right hand threads. Standard screwed, for steam and water working pressure up to 150 pounds. Flat banded, right hand threads.
Genova 700 Solvent Weld Dwv Pipe Reducing Wye Genova 71122 PVC-DWV Fitting Genova 300 Pipe Nipple
Used when connecting a reducing branch line into a horizontal drain pipe. Also, can be used in conjunction with a Twist-Lok plug to provide a cleanout in a drain pipe. Used when connecting a branch line into a vertical drain pipe (stack). Gray fittings used for sprinkler systems where an extension is needed for the sprinkler head to be above ground level. Also may be used to prevent damage to the sprinkler head. Teflon thread tape is recommended for threaded joints.
Genova 700 Combination Solvent Weld Pipe Tee-Wye World Wide Sourcing B300 40 Black Pipe Malleable Cap Genova 700 Combination Solvent Weld Pipe Tee-Wye
Required in some plumbing code areas to connect branch line into a vertical drain pipe instead of conventional tee fitting. Also used to connect horizontal branch pipe approaching a horizontal drain pipe on the perpendicular. (Can be made from a wye and street eighth bend.) Flat banded, right hand threads. Required in some plumbing code areas to connect branch line into a vertical drain pipe instead of conventional tee fitting. Also used to connect horizontal branch pipe approaching a horizontal drain pipe on the perpendicular. (Can be made from a wye and street eighth bend.)
Genova 700 Dwv Pipe Reducing Bushing Genova 700 Dwv Pipe Reducing Bushing NDS U-0750-T PVC Fittings
Inserts into fitting hub to reduce to smaller pipe size in drain-waste-vent applications. Inserts into fitting hub to reduce to smaller pipe size in drain-waste-vent applications. Full port design, used in joining 2 pipes together where a serviceable connection is desired. Acme threads on body and nut eliminate cross threading and prevent nut from creeping under pressure. Rugged Hi-Impact gray PVC Type II construction with EPDM o-ring. Meets ASTM schedule 80 socket standards. Complies with all applicable ASTM and ANSI standards. NSF Listed, IAPMO approved.
NDS U-0750-S PVC Union Genova 300 Pipe Nipple Genova Products 71130 PVC-DWV Sanitary Tee
Full port design, used in joining 2 pipes together where a serviceable connection is desired. Acme threads on body and nut eliminate cross threading and prevent nut from creeping under pressure. Rugged Hi-Impact gray PVC Type II construction with EPDM o-ring. Meets ASTM schedule 80 socket standards. Complies with all applicable ASTM and ANSI standards. NSF Listed, IAPMO approved. Gray fittings used for sprinkler systems where an extension is needed for the sprinkler head to be above ground level. Also may be used to prevent damage to the sprinkler head. Teflon thread tape is recommended for threaded joints. Used when connecting a branch line into vertical drain pipe (stack).
World Wide Sourcing BSC 25 Black Pipe Merchant Coupling Elkhart 30136 Copper Fitting Elkhart 30124 Copper Fitting
WORLDWIDE SOURCING Pipe Merchant Coupling, 1 in Nominal Size, Threaded, Steel, Black Oxide EPC Pipe Reducing Adapter, 1/2 x 3/8 in Nominal Size, Copper x FNPT, Wrot Copper EPC Pipe Reducing Adapter, 1/2 x 3/8 in Nominal Size, Copper x FNPT, Wrot Copper
Genova Products 71131 PVC-DWV Sanitary Tee Genova 700 Dwv Reducing Double Sanitary Tee Genova 300 Pipe Nipple
Used when connecting a branch line into a vertical drain pipe (stack). Used to bring two reducing branch lines into a vertical drain pipe (stack). Gray fittings used for sprinkler systems where an extension is needed for the sprinkler head to be above ground level. Also may be used to prevent damage to the sprinkler head. Teflon thread tape is recommended for threaded joints.
Genova Products 71132 PVC-DWV Sanitary Tee NDS U-0500-T PVC Fittings NDS U-0500-S PVC Fittings
Used when connecting a branch line into a vertical drain pipe (stack). Full port design, used in joining 2 pipes together where a serviceable connection is desired. Acme threads on body and nut eliminate cross threading and prevent nut from creeping under pressure. Rugged Hi-Impact gray PVC Type II construction with EPDM o-ring. Meets ASTM schedule 80 socket standards. Complies with all applicable ASTM and ANSI standards. NSF Listed, IAPMO approved. Full port design, used in joining 2 pipes together where a serviceable connection is desired. Acme threads on body and nut eliminate cross threading and prevent nut from creeping under pressure. Rugged Hi-Impact gray PVC Type II construction with EPDM o-ring. Meets ASTM schedule 80 socket standards. Complies with all applicable ASTM and ANSI standards. NSF Listed, IAPMO approved.
World Wide Sourcing BSC 32 Black Pipe Merchant Coupling Genova 600 Dwv Pipe Adapter Genova 700 Dwv Pipe Cap
WORLDWIDE SOURCING Pipe Merchant Coupling, 1-1/4 in Nominal Size, Threaded, Steel, Black Oxide Flush sleeve adapts a Schedule 40 IPS fitting hub to Schedule 30 pipe size. Bagged. Used for permanently or temporarily capping pipe in drain-waste-vent applications.
Genova 700 Dwv Double Sanitary Tee Genova 700 Solvent Weld Dwv Pipe Reducing Wye Genova 300 Pipe Nipple
Used to bring two branch lines into a vertical drain pipe (stack). Used when connecting a reducing branch line into a horizontal drain pipe. Also, can be used in conjunction with a Twist-Lok plug to provide a cleanout in a drain pipe. Gray fittings used for sprinkler systems where an extension is needed for the sprinkler head to be above ground level. Also may be used to prevent damage to the sprinkler head. Teflon thread tape is recommended for threaded joints.
Genova 300 Pipe Nipple World Wide Sourcing BSC 40 Black Pipe Merchant Coupling NDS U-1000-T PVC Fitting
Gray fittings used for sprinkler systems where an extension is needed for the sprinkler head to be above ground level. Also may be used to prevent damage to the sprinkler head. Teflon thread tape is recommended for threaded joints. WORLDWIDE SOURCING Pipe Merchant Coupling, 1-1/2 in Nominal Size, Threaded, Steel, Black Oxide Full port design, used in joining 2 pipes together where a serviceable connection is desired. Acme threads on body and nut eliminate cross threading and prevent nut from creeping under pressure. Rugged Hi-Impact gray PVC Type II construction with EPDM o-ring. Meets ASTM schedule 80 socket standards. Complies with all applicable ASTM and ANSI standards. NSF Listed, IAPMO approved.
NDS U-1000-S PVC Union Genova 700 Solvent Weld Dwv Pipe Wye Genova 700 Solvent Weld Dwv Pipe Reducing Wye
Full port design, used in joining 2 pipes together where a serviceable connection is desired. Acme threads on body and nut eliminate cross threading and prevent nut from creeping under pressure. Rugged Hi-Impact gray PVC Type II construction with EPDM o-ring. Meets ASTM schedule 80 socket standards. Complies with all applicable ASTM and ANSI standards. NSF Listed, IAPMO approved. Used when connecting a branch line into a horizontal drain pipe. Also can be used in conjunction with a Twist-Lok plug to provide a cleanout in a drain pipe. Used when connecting a reducing branch line into a horizontal drain pipe. Also, can be used in conjunction with a Twist-Lok plug to provide a cleanout in a drain pipe.
Genova 700 Solvent Weld Dwv Pipe Double Wye Genova 300 Pipe Nipple Genova 71431 PVC-DWV Fitting
Used to bring two branch lines into a horizontal drain pipe in drain-waste-vent applications. Gray fittings used for sprinkler systems where an extension is needed for the sprinkler head to be above ground level. Also may be used to prevent damage to the sprinkler head. Teflon thread tape is recommended for threaded joints. Used in conjunction with a threaded plug to provide a cleanout opening. Teflon thread tape is recommended for threaded joints.
Elkhart 30156 Copper Fitting World Wide Sourcing 18-2B Black Pipe Malleable Cap Genova 700 Combination Solvent Weld Pipe Reducing Tee/Wye
EPC Pipe Reducing Adapter, 3/4 x 1/2 in Nominal Size, Copper x FNPT, Wrot Copper Flat banded, right hand threads. Required in some plumbing code areas to connect a branch line into a vertical drain pipe (stack) instead of a conventional tee fitting. Also used to connect a horizontal branch pipe approaching a horizontal drain pipe on the perpendicular.
Mueller ProLine 2-Piece Gas Ball Valve NDS U-1250-T PVC Fittings NDS U-1250-S PVC Union
Two-piece body.Multi-directional flow, chrome-plated brass bal, CSA-ANSI Z21-15 (1/2 Psig), ANSI/ASME 316.44 (5G), UL lised. Threaded ends comply with ANSI B1.20.1. -20 to 300 DegF temperature range. quartert turn lever handle for positive on/off operation, coated aluminum handle for corrosion and solvent resistance. Full port design, used in joining 2 pipes together where a serviceable connection is desired. Acme threads on body and nut eliminate cross threading and prevent nut from creeping under pressure. Rugged Hi-Impact gray PVC Type II construction with EPDM o-ring. Meets ASTM schedule 80 socket standards. Complies with all applicable ASTM and ANSI standards. NSF Listed, IAPMO approved. Full port design, used in joining 2 pipes together where a serviceable connection is desired. Acme threads on body and nut eliminate cross threading and prevent nut from creeping under pressure. Rugged Hi-Impact gray PVC Type II construction with EPDM o-ring. Meets ASTM schedule 80 socket standards. Complies with all applicable ASTM and ANSI standards. NSF Listed, IAPMO approved.
Genova 700 Dwv Pipe Reducing Bushing Genova 700 Solvent Weld Dwv Pipe Double Wye World Wide Sourcing 4-1-1/2B Black Pipe 45 Deg Elbow
Inserts into fitting hub to reduce to smaller pipe size in drain-waste-vent applications. Used to bring two branch lines into a horizontal drain pipe in drain-waste-vent applications. Standard screwed, for steam and water working pressure up to 150 pounds. Flat banded, right hand threads.
Elkhart Products 30134 Copper Fittings World Wide Sourcing 4-1-1/4B Black Pipe 45 Deg Elbow World Wide Sourcing BSC 50 Black Pipe Malleable Steel Merchant Coupling
EPC Pipe Reducing Adapter, 1/2 X 3/4 in Nominal Size, Copper x FNPT, Wrot Copper Standard screwed, for steam and water working pressure up to 150 pounds. Flat banded, right hand threads. WORLDWIDE SOURCING Pipe Merchant Coupling, 2 in Nominal Size, Threaded, Steel, Black Oxide
Genova 700 Dwv Reducing Double Sanitary Tee VALVE 1/2IN FIP X FIP         World Wide Sourcing 34B-1/4G Galvanized Malleable 150 Union
Used to bring two reducing branch lines into a vertical drain pipe (stack). Yellow handle. 1/2 PSI maximum working pressure. For steam and water working pressure up to 150 pounds. Brass to iron ball joint seat. Male end of seat made with radius to insure perfect contact if piles are out of line. Recommended for all ordinary plumbing and steam fitting jobs. Scientifically designed to reduce weight without sacrificing strength.
Genova Products 71140 PVC-DWV Sanitary Tee Brass Craft PSBV503-8 Quarter Turn Gas Ball Valve Genova 700 Dwv Pipe Cap
Used when connecting a branch line into vertical drain pipe (stack). Gas appliance connector with lever handle. AGA Design Certified. Used for permanently or temporarily capping pipe in drain-waste-vent applications.
Genova 700 Solvent Weld Dwv Pipe Reducing Wye Genova 73532 PVC-DWV Fitting Worldwide Sourcing 34B-1/2G Galvanized Pipe Union
Used when connecting a reducing branch line into a horizontal drain pipe. Also, can be used in conjunction with a Twist-Lok plug to provide a cleanout in a drain pipe. Used to bring two reducing branch lines into a vertical drain pipe (stack). For steam and water working pressure up to 150 pounds. Brass to iron ball joint seat. Male end of seat made with radius to insure perfect contact if piles are out of line. Recommended for all ordinary plumbing and steam fitting jobs. Scientifically designed to reduce weight without sacrificing strength.
Genova 79230 Dwv Floor Strainer World Wide Sourcing 1309 Galvanized Malleable 150 Union Brass Craft PSSL-12 Gas Ball Valves
Prevents debris from entering a drain opening on the floor. Fits flush into any fitting hub flush to the floor. For steam and water working pressure up to 150 pounds. Brass to iron ball joint seat. Male end of seat made with radius to insure perfect contact if piles are out of line. Recommended for all ordinary plumbing and steam fitting jobs. Scientifically designed to reduce weight without sacrificing strength. Recommended for appliance connections. Corrosion resistant brass construction with yellow painted aluminum handles. Threads conform to all applicable standards. CSA design Certified and meets ANSI Z21-15.
Genova 700 Combination Solvent Weld Pipe Tee-Wye Brass Craft PSSD-41 Quarter Turn Gas Ball Valve VALVE 3/8IN FIP X FIP
Required in some plumbing code areas to connect a branch line into vertical drain pipe instead of conventional tee fitting. Also used to connect a horizontal branch pipe approaching a horizontal drain pipe on the perpendicular. (Can be made from a wye and a street eighth bend.) Recommended for appliance connections. Corrosion resistant brass construction with yellow painted aluminum handles. Threads conform to all applicable standards. CSA design Certified and meets ANSI Z21-15. Yellow handle. 1/2 PSI maximum working pressure.
Genova 71141 PVC-DWV Fitting World Wide Sourcing PPG342-6 Galvanized Malleable 150 Union Mueller ProLine 1-Piece Gas Ball Valve
Used when connecting a branch line into a vertical drain pipe (stack). For steam and water working pressure up to 150 pounds. Brass to iron ball joint seat. Male end of seat made with radius to insure perfect contact if piles are out of line. Recommended for all ordinary plumbing and steam fitting jobs. Scientifically designed to reduce weight without sacrificing strength. Heavy forged brass construction. One piece body. Non-displaceable chrome plated forged brass ball. Coated aluminum handle, for use with natural manufactured, mixed liquefied petroleum and LP gas/air mixtures. Approved by the American Gas Association, Underwriters Laboratories and the Canadian Gas Association. Special rubber seals conform to ASTM D471. Threaded ends comply with ANSI B1.20.1. UPC coded. Bulk handy carton. UL listed.
VALVE 1/2IN FIP X FIP 1 PIECE VALVE 3/4IN FIP X FIP         Genova 700 Solvent Weld Dwv Pipe Reducing Wye
Yellow handle. 1/2 PSI maximum working pressure. Yellow handle. 1/2 PSI maximum working pressure. Used when connecting a reducing branch line into a horizontal drain pipe. Also, can be used in conjunction with a Twist-Lok plug to provide a cleanout in a drain pipe.
Worldwide Sourcing 34B-3/4G Galvanized Pipe Union Brass Craft TBV6F-8 Quarter Turn Gas Ball Valve Genova 700 Combination Solvent Weld Pipe Reducing Tee/Wye
For steam and water working pressure up to 150 pounds. Brass to iron ball joint seat. Male end of seat made with radius to insure perfect contact if piles are out of line. Recommended for all ordinary plumbing and steam fitting jobs. Scientifically designed to reduce weight without sacrificing strength. Forged brass body eliminates pinhole leaks commonly associated with cast products. Specially designed seat rings are made of pure PTFE to assure longer life. Quarter-turn design for easy on/off operation. 100% leak tested. Blow-out proof stem is assembled from the inside with double O-rings to ensure safe, reliable performance. Large octagonal wrench flats for easy installation. CSA design-certified. Also design-certified and manufactured in accordance with ANSI Z21.15 CSA 9.1, ANSI/ASME B16.33, ANSI/ASME B16.44, CSA-US/C 3-88, CSA-US/C CR91-002, and CSA 3.16 Required in some plumbing code areas to connect a branch line into a vertical drain pipe (stack) instead of a conventional tee fitting. Also used to connect a horizontal branch pipe approaching a horizontal drain pipe on the perpendicular.
Brass Craft TBVF8 Quarter Turn Gas Ball Valve Genova Products 71142 PVC-DWV Reducing Sanitary Tee World Wide Sourcing 4-2B Black Pipe  Malleable 45 Degree Elbow
Forged brass body eliminates pinhole leaks commonly associated with cast products. Specially designed seat rings are made of pure PTFE to assure longer life. Quarter-turn design for easy on/off operation. 100% leak tested. Blow-out proof stem is assembled from the inside with double O-rings to ensure safe, reliable performance. Large octagonal wrench flats for easy installation. CSA design-certified. Also design-certified and manufactured in accordance with ANSI Z21.15 CSA 9.1, ANSI/ASME B16.33, ANSI/ASME B16.44, CSA-US/C 3-88, CSA-US/C CR91-002, and CSA 3.16 Used when connecting a branch line into a vertical drain pipe (stack). Standard screwed, for steam and water working pressure up to 150 pounds. Flat banded, right hand threads.
Elkhart 30166 Copper Fitting NDS U-1500-T PVC Fitting NDS U-1500-S PVC Union
EPC Pipe Reducing Adapter, 1 x 3/4 in Nominal Size, Copper x FNPT, Wrot Copper Full port design, used in joining 2 pipes together where a serviceable connection is desired. Acme threads on body and nut eliminate cross threading and prevent nut from creeping under pressure. Rugged Hi-Impact gray PVC Type II construction with EPDM o-ring. Meets ASTM schedule 80 socket standards. Complies with all applicable ASTM and ANSI standards. NSF Listed, IAPMO approved. Full port design, used in joining 2 pipes together where a serviceable connection is desired. Acme threads on body and nut eliminate cross threading and prevent nut from creeping under pressure. Rugged Hi-Impact gray PVC Type II construction with EPDM o-ring. Meets ASTM schedule 80 socket standards. Complies with all applicable ASTM and ANSI standards. NSF Listed, IAPMO approved.
Genova 700 Solvent Weld Dwv Pipe Wye Worldwide Sourcing 34B-1G Galvanized Pipe Union VALVE 3/4IN FIP X FIP 1 PIECE
Used when connecting a branch line into a horizontal drain pipe. Also can be used in conjunction with a Twist-Lok plug to provide a cleanout in a drain pipe. For steam and water working pressure up to 150 pounds. Brass to iron ball joint seat. Male end of seat made with radius to insure perfect contact if piles are out of line. Recommended for all ordinary plumbing and steam fitting jobs. Scientifically designed to reduce weight without sacrificing strength. Yellow handle. 1/2 PSI maximum working pressure.
Mueller ProLine 2-Piece Gas Ball Valve Mueller ProLine 1-Piece Gas Ball Valve Elkhart 30154 Copper Fitting
Two-piece body.Multi-directional flow, chrome-plated brass bal, CSA-ANSI Z21-15 (1/2 Psig), ANSI/ASME 316.44 (5G), UL lised. Threaded ends comply with ANSI B1.20.1. -20 to 300 DegF temperature range. quartert turn lever handle for positive on/off operation, coated aluminum handle for corrosion and solvent resistance. Heavy forged brass construction. One piece body. Non-displaceable chrome plated forged brass ball. Coated aluminum handle, for use with natural manufactured, mixed liquefied petroleum and LP gas/air mixtures. Approved by the American Gas Association, Underwriters Laboratories and the Canadian Gas Association. Special rubber seals conform to ASTM D471. Threaded ends comply with ANSI B1.20.1. UPC coded. Bulk handy carton. UL listed. EPC Pipe Reducing Adapter, 1 x 3/4 in Nominal Size, Copper x FNPT, Wrot Copper
Genova Products 71143 PVC-DWV Reducing Sanitary Tee Genova 71441 PVC-DWV Fitting Worldwide Sourcing 34B-1-1/4G Galvanized Pipe Union
Used when connecting a branch line into a vertical drain pipe (stack). Used in conjunction with a threaded plug to provide a cleanout opening. Teflon thread tape is recommended for threaded joints. For steam and water working pressure up to 150 pounds. Brass to iron ball joint seat. Male end of seat made with radius to insure perfect contact if piles are out of line. Recommended for all ordinary plumbing and steam fitting jobs. Scientifically designed to reduce weight without sacrificing strength.
B K Industries 117-592 Gas Ball Valves Mueller ProLine 1-Piece Quarter Turn Gas Ball Valve Genova 79240 Dwv Floor Strainer
Forged brass 1-piece body. Chrome plated forged brass ball. Coated aluminum handle. 9/16''-24 fine thread flare for 3/8'' tube. Threaded ends comply with ANSI B1.20.1. CSA Certified, CSA- 3-88 (2 PSIG) Certified. Threaded flare ends comply with SAE F513. UPC coded bulk. -20 to 300 degrees F. temperature range, sure-off tamper-resistant handle, quarter, push-to-turn operation prevents unintentional opening of valve, coated aluminum handle, multi-directional flow, one-piece body, chrome-plated brass ball. CSA-ANSI Z21.15 (1/2 PSIG), ANSI/ASME B16.44(5G),UL listed, threaded ends comply with ANSI B1.20.1 Prevents debris from entering a drain opening on the floor. Fits flush into any fitting hub flush to the floor.
Worldwide Sourcing PMB-270-3LF3L Ice Maker Installation Kits Mueller ProLine 1-Piece Gas Ball Valve Brass Craft PSBV503-12 Quarter Turn Gas Ball Valve
Ice maker installation kit, 1/4" outlet. Dimension: 13.31 x 21.26 x 25.58 in. Heavy forged brass construction. One piece body. Non-displaceable chrome plated forged brass ball. Coated aluminum handle, for use with natural manufactured, mixed liquefied petroleum and LP gas/air mixtures. Approved by the American Gas Association, Underwriters Laboratories and the Canadian Gas Association. Special rubber seals conform to ASTM D471. Threaded ends comply with ANSI B1.20.1. UPC coded. Bulk handy carton. UL listed. Gas appliance connector with lever handle. AGA Design Certified.
AMC Hei-1Sp Ice Maker Kit Plumb Pak PP855-20LF Ice Maker Kit Genova 700 Dwv Double Sanitary Tee
AMC Hei-1Sp Ice Maker Kit
Our Price: $11.75
Hook up water supply to existing ice maker in freezer. 25' Polyethylene tubing. (1) 104SCSD self-tapping saddle valve. (1) 62 1/4 compression union. (3) 60P 1/4 delrin sleeve. (3) 61P-1/4 brass insert. Bagged. Includes: 25' poly tubing. All necessary fittings. Shut off valve and saddle valve. Used to bring two branch lines into a vertical drain pipe (stack).
VALVE1/2IN FIP X 15/16IN FLARE NDS U-2000-S PVC Union NDS U-2000-T PVC Fittings
Yellow handle. 1/2 PSI maximum working pressure. Full port design, used in joining 2 pipes together where a serviceable connection is desired. Acme threads on body and nut eliminate cross threading and prevent nut from creeping under pressure. Rugged Hi-Impact gray PVC Type II construction with EPDM o-ring. Meets ASTM schedule 80 socket standards. Complies with all applicable ASTM and ANSI standards. NSF Listed, IAPMO approved. Full port design, used in joining 2 pipes together where a serviceable connection is desired. Acme threads on body and nut eliminate cross threading and prevent nut from creeping under pressure. Rugged Hi-Impact gray PVC Type II construction with EPDM o-ring. Meets ASTM schedule 80 socket standards. Complies with all applicable ASTM and ANSI standards. NSF Listed, IAPMO approved.
Genova 700 Solvent Weld Dwv Pipe Double Wye B and K Industries 115-503 Gas Ball Valve Genova 700 Combination Solvent Weld Pipe Reducing Tee/Wye
Used to bring two branch lines into a horizontal drain pipe in drain-waste-vent applications. Forged brass 1-piece body with chrome-plated forged brass ball and coated aluminum handle. Threaded flare ends comply to SAE F513. For natural gas, also approved for use with water up to 175 PSI. Threaded ends comply with ANSI B1.20.1. CSA Certified, CSA- 3-88 (2 PSIG) Certified. UPC coded bulk. Required in some plumbing code areas to connect a branch line into a vertical drain pipe (stack) instead of a conventional tee fitting. Also used to connect a horizontal branch pipe approaching a horizontal drain pipe on the perpendicular.
Genova 700 Combination Solvent Weld Pipe Reducing Tee/Wye VALVE 3/4IN FIP X 15/16 FLARE Genova Products 71633 PVC-DWV Cleanout Tee
Required in some plumbing code areas to connect a branch line into a vertical drain pipe (stack) instead of a conventional tee fitting. Also used to connect a horizontal branch pipe approaching a horizontal drain pipe on the perpendicular. Yellow handle. 1/2 PSI maximum working pressure. Used with a vertical pipe stack to provide for above ground level access to piping.
VALVE 3/4IN FIP X 5/8IN FLARE Brass Craft PSSC-61 Gas Ball Valves Brass Craft PSSC-60 Quarter Turn Gas Ball Valve
Yellow handle. 1/2 PSI maximum working pressure. Non-replaceable rotor. 6.9"L x 4.9"W x 1.9"D Recommended for appliance connections. Corrosion resistant brass construction with yellow painted aluminum handles. Threads conform to all applicable standards. CSA design Certified and meets ANSI Z21-15.
Mueller ProLine 1-Piece Gas Ball Valve Genova 700 Combination Solvent Weld Pipe Tee/Wye Genova 700 Solvent Weld Dwv Pipe Reducing Wye
1-piece body, chrome-plated forged brass ball, coated aluminum handle. Threaded ends comply with ANSI B1.20.1. CSA Certified. Threaded flare ends comply to SEA J513. CSA Z21 (PSIG) certified. Required in some plumbing code areas to connect a branch line into vertical drain pipe instead of conventional tee fitting. Also used to connect a horizontal branch pipe approaching a horizontal drain pipe on the perpendicular. (Can be made from a wye and a street eighth bend.) Used when connecting a reducing branch line into a horizontal drain pipe. Also, can be used in conjunction with a Twist-Lok plug to provide a cleanout in a drain pipe.
B and K Industries 110-225/110-125 Gas Ball Valve Genova 77031 PVC-DWV Fitting Worldwide Sourcing 34B-1-1/2G Galvanized Pipe Union
-20 Deg. F ? 300 Deg. F temperature range, quarter-turn lever handle for positive on/off operation, coated aluminum handle for corrosion and solvent resistance, multi-directional flow, two-piece body design, chrome-plated brass ball, CSA - ANSI Z21.15, (1/2 PSIG), ANSI/ASME B16.44 (5G), UL listed, threaded ends comply with ANSI B1.20.1. Rated for 200 PSI Provides for the connection of 1-1/2" or 2" vent or branch waste piping to a vertical pipe as well as receiving the discharge of a water closet. The inlets are constructed to accept a 2" fitting hub over their outside diameter or an 1-1/2" pipe into their inside diameter. For steam and water working pressure up to 150 pounds. Brass to iron ball joint seat. Male end of seat made with radius to insure perfect contact if piles are out of line. Recommended for all ordinary plumbing and steam fitting jobs. Scientifically designed to reduce weight without sacrificing strength.
Mueller ProLine 1-Piece Quarter Turn Gas Ball Valve VALVE 1IN FIPX1IN FIP TEE HNDL Genova 700 Dwv Pipe Reducing Bushing
-20 to 300 degrees F. temperature range, sure-off tamper-resistant handle, quarter, push-to-turn operation prevents unintentional opening of valve, coated aluminum handle, multi-directional flow, one-piece body, chrome-plated brass ball. CSA-ANSI Z21.15 (1/2 PSIG), ANSI/ASME B16.44(5G),UL listed, threaded ends comply with ANSI B1.20.1 Yellow handle. 1/2 PSI maximum working pressure. Inserts into fitting hub to reduce to smaller pipe size in drain-waste-vent applications.
Eastman 60237 Round Mini Ice Maker Outlet Box Mueller ProLine 1-Piece Quarter Turn Gas Ball Valve Eastman 60238 Round Mini Ice Maker Outlet Box
Pre-loaded nails provide strong rigid mount. Nails are reversible and box can be mounted to left or right stud. Trim ring accommodates up to 1" sheet rock. UPC, Lead Free. -20 to 300 degrees F. temperature range, sure-off tamper-resistant handle, quarter, push-to-turn operation prevents unintentional opening of valve, coated aluminum handle, multi-directional flow, one-piece body, chrome-plated brass ball. CSA-ANSI Z21.15 (1/2 PSIG), ANSI/ASME B16.44(5G),UL listed, threaded ends comply with ANSI B1.20.1 Pre-loaded nails provide strong rigid mount. Nails are reversible and box can be mounted to left or right stud. Trim ring accommodates up to 1" sheet rock. UPC, Lead Free.
Genova 700 Dwv Pipe Cap VALVE 1/2IN MIP X CSST DIRECT Genova Products 71644 PVC-DWV Cleanout Tee
Used for permanently or temporarily capping pipe in drain-waste-vent applications. Yellow handle. 1/2 PSI maximum working pressure. Used with a vertical pipe stack to provide for above ground level access to piping.
Eastman 60234/39165 Ice Maker Outlet Box Genova 73542 PVC-DWV Fitting Genova 700 Dwv Double Sanitary Tee
1/2 CPVC Used to bring two reducing branch lines into a vertical drain pipe (stack). Used to bring two branch lines into a vertical drain pipe (stack).
Genova 73440 PVC-DWV Fitting Worldwide Sourcing 34B-2G Galvanized Pipe Union Oatey I2K 39130/39134 Ice Maker Outlet Box
Used to bring two branch lines into a horizontal drain pipe in drain-waste-vent applications. For steam and water working pressure up to 150 pounds. Brass to iron ball joint seat. Male end of seat made with radius to insure perfect contact if piles are out of line. Recommended for all ordinary plumbing and steam fitting jobs. Scientifically designed to reduce weight without sacrificing strength. 12K quarter-turn copper sweat. can be used in commercial or residential applications which require supply valves recessed into the wall. Nails preloaded- no support bracket needed, right or left hand installation, high impact polystyrene box, valves comply with requirements of NSL 61, sec. 9. Snap-on faceplate frame.