|
|
|
|
|
|
|
|
|
|
|
Used to change direction in piping. Conforms to ASTM D2466.
|
Adapts from solvent welded line to standard male pipe threads. Teflon thread tape is recommended for threaded joints. Conforms to ASTM D2466.
|
Used to change direction in piping. Conforms to ASTM D2466.
|
|
|
|
|
|
|
|
|
|
|
|
|
Gray fittings used for sprinkler systems where an extension is needed for the sprinkler head to be above ground level. Also may be used to prevent damage to the sprinkler head. Teflon thread tape is recommended for threaded joints.
|
Gray fittings used for sprinkler systems where an extension is needed for the sprinkler head to be above ground level. Also may be used to prevent damage to the sprinkler head. Teflon thread tape is recommended for threaded joints.
|
Used to change direction in piping and reduce size. Adapts from solvent welded line to standard male pipe threads. Teflon thread tape is recommended for threaded joints. Conforms to ASTM D2466.
|
|
|
|
|
|
|
|
|
|
|
|
|
Used to change direction in piping. Conforms to ASTM D2466.
|
Gray fittings used for sprinkler systems where an extension is needed for the sprinkler head to be above ground level. Also may be used to prevent damage to the sprinkler head. Teflon thread tape is recommended for threaded joints.
|
Gray fittings used for sprinkler systems where an extension is needed for the sprinkler head to be above ground level. Also may be used to prevent damage to the sprinkler head. Teflon thread tape is recommended for threaded joints.
|
|
|
|
|
|
|
|
|
|
|
|
|
Gray fittings used for sprinkler systems where an extension is needed for the sprinkler head to be above ground level. Also may be used to prevent damage to the sprinkler head. Teflon thread tape is recommended for threaded joints.
|
Adapts from solvent welded line to standard male pipe threads. Teflon thread tape is recommended for threaded joints. Conforms to ASTM D2466.
|
Used to change direction in piping. Fitting reduces to smaller pipe size. Conforms to ASTM D2466.
|
|
|
|
|
|
|
|
|
|
|
|
|
Adapts to standard female pipe threads. Teflon thread tape is recommended for threaded joints. Conforms to ASTM D2466.
|
Solvent welds directly into fitting socket to form permanent closure. Conforms to ASTM D2466.
|
Gray fittings used for sprinkler systems where an extension is needed for the sprinkler head to be above ground level. Also may be used to prevent damage to the sprinkler head. Teflon thread tape is recommended for threaded joints.
|
|
|
|
|
|
|
|
|
|
|
|
|
Gray fittings used for sprinkler systems where an extension is needed for the sprinkler head to be above ground level. Also may be used to prevent damage to the sprinkler head. Teflon thread tape is recommended for threaded joints.
|
Gray fittings used for sprinkler systems where an extension is needed for the sprinkler head to be above ground level. Also may be used to prevent damage to the sprinkler head. Teflon thread tape is recommended for threaded joints.
|
Adapts to standard female pipe threads. Teflon thread tape is recommended for threaded joints. Conforms to ASTM D2466.
|
|
|
|
|
|
|
|
|
|
|
|
|
Solvent welds directly into fitting socket to form permanent closure. Conforms to ASTM D2466.
|
Gray fittings used for sprinkler systems where an extension is needed for the sprinkler head to be above ground level. Also may be used to prevent damage to the sprinkler head. Teflon thread tape is recommended for threaded joints.
|
Gray fittings used for sprinkler systems where an extension is needed for the sprinkler head to be above ground level. Also may be used to prevent damage to the sprinkler head. Teflon thread tape is recommended for threaded joints.
|
|
|
|
|
|
|
|
|
|
|
|
|
Gray fittings used for sprinkler systems where an extension is needed for the sprinkler head to be above ground level. Also may be used to prevent damage to the sprinkler head. Teflon thread tape is recommended for threaded joints.
|
Gray fittings used for sprinkler systems where an extension is needed for the sprinkler head to be above ground level. Also may be used to prevent damage to the sprinkler head. Teflon thread tape is recommended for threaded joints.
|
Inserts into fitting hub to reduce to smaller pipe size in drain-waste-vent applications.
|
|
|
|
|
|
|
|
|
|
|
|
|
Adapts from solvent welded line to standard male pipe threads. Teflon thread tape is recommended for threaded joints. Conforms to ASTM D2466.
|
Gray fittings used for sprinkler systems where an extension is needed for the sprinkler head to be above ground level. Also may be used to prevent damage to the sprinkler head. Teflon thread tape is recommended for threaded joints.
|
Adapts to standard female pipe threads. Teflon thread tape is recommended for threaded joints. Conforms to ASTM D2466.
|
|
|
|
|
|
|
|
|
|
|
|
|
Used to change direction in piping. Adapts to standard male pipe threads. Teflon thread tape is recommended for threaded joints. Conforms to ASTM D2466.
|
Used to change direction in piping. Conforms to ASTM D2466.
|
Used to change direction in piping. Conforms to ASTM D2466.
|
|
|
|
|
|
|
|
|
|
|
|
|
Used to change direction in piping. Conforms to ASTM D2466.
|
Gray fittings used for sprinkler systems where an extension is needed for the sprinkler head to be above ground level. Also may be used to prevent damage to the sprinkler head. Teflon thread tape is recommended for threaded joints.
|
Used to change direction in piping. Conforms to ASTM D2466.
|
|
|
|
|
|
|
|
|
|
|
|
|
Gray fittings used for sprinkler systems where an extension is needed for the sprinkler head to be above ground level. Also may be used to prevent damage to the sprinkler head. Teflon thread tape is recommended for threaded joints.
|
Gray fittings used for sprinkler systems where an extension is needed for the sprinkler head to be above ground level. Also may be used to prevent damage to the sprinkler head. Teflon thread tape is recommended for threaded joints.
|
Used to change direction in piping. Adapts to standard male pipe threads. Teflon thread tape is recommended for threaded joints. Meets ASTM D2466. NSF listed.
|
|
|
|
|
|
|
|
|
|
|
|
|
Used to change direction in piping. Conforms to ASTM D2466.
|
Adapts to standard female pipe threads. Teflon thread tape is recommended for threaded joints. Conforms to ASTM D2466.
|
Gray fittings used for sprinkler systems where an extension is needed for the sprinkler head to be above ground level. Also may be used to prevent damage to the sprinkler head. Teflon thread tape is recommended for threaded joints.
|
|
|
|
|
|
|
|
|
|
|
|
|
Gray fittings used for sprinkler systems where an extension is needed for the sprinkler head to be above ground level. Also may be used to prevent damage to the sprinkler head. Teflon thread tape is recommended for threaded joints.
|
Gray fittings used for sprinkler systems where an extension is needed for the sprinkler head to be above ground level. Also may be used to prevent damage to the sprinkler head. Teflon thread tape is recommended for threaded joints.
|
Gray fittings used for sprinkler systems where an extension is needed for the sprinkler head to be above ground level. Also may be used to prevent damage to the sprinkler head. Teflon thread tape is recommended for threaded joints.
|
|
|
|
|
|
|
|
|
|
|
|
|
Gray fittings used for sprinkler systems where an extension is needed for the sprinkler head to be above ground level. Also may be used to prevent damage to the sprinkler head. Teflon thread tape is recommended for threaded joints.
|
Used to change direction in piping and reduce size. Adapts from solvent welded line to standard male pipe threads. Teflon thread tape is recommended for threaded joints. Conforms to ASTM D2466.
|
Solvent welds directly into fitting socket to form permanent closure. Conforms to ASTM D2466.
|
|
|
|
|
|
|
|
|
|
|
|
|
Used to change direction in piping. Fitting reduces to smaller pipe size. Conforms to ASTM D2466.
|
Used to change direction in piping. Conforms to ASTM D2466.
|
Gray fittings used for sprinkler systems where an extension is needed for the sprinkler head to be above ground level. Also may be used to prevent damage to the sprinkler head. Teflon thread tape is recommended for threaded joints.
|
|
|
|
|
|
|
|
|
|
|
|
|
Gray fittings used for sprinkler systems where an extension is needed for the sprinkler head to be above ground level. Also may be used to prevent damage to the sprinkler head. Teflon thread tape is recommended for threaded joints.
|
Gray fittings used for sprinkler systems where an extension is needed for the sprinkler head to be above ground level. Also may be used to prevent damage to the sprinkler head. Teflon thread tape is recommended for threaded joints.
|
Used to change direction in piping. Adapts to standard male pipe threads. Teflon thread tape is recommended for threaded joints. Meets ASTM D2466. NSF listed.
|
|
|
|
|
|
|
|
|
|
|
|
|
Used to change direction in piping. Fitting reduces to smaller pipe size. Conforms to ASTM D2466.
|
Gray fittings used for sprinkler systems where an extension is needed for the sprinkler head to be above ground level. Also may be used to prevent damage to the sprinkler head. Teflon thread tape is recommended for threaded joints.
|
Solvent welds directly into fitting socket to form permanent closure. Conforms to ASTM D2466.
|
|
|
|
|
|
|
|
|
|
|
|
|
Used to change direction in piping. Adapts to standard male pipe threads. Teflon thread tape is recommended for threaded joints. Conforms to ASTM D2466.
|
Specially made to be used inside a 2" x 4" stud wall construction. Use in drain-waste-vent applications to join straight lengths of pipe.
|
Adapts from solvent welded line to standard male pipe threads. Teflon thread tape is recommended for threaded joints. Conforms to ASTM D2466.
|
|
|
|
|
|
|
|
|
|
|
|
|
Adapts to standard female pipe threads. Teflon thread tape is recommended for threaded joints. Conforms to ASTM D2466.
|
Gray fittings used for sprinkler systems where an extension is needed for the sprinkler head to be above ground level. Also may be used to prevent damage to the sprinkler head. Teflon thread tape is recommended for threaded joints.
|
Used to change direction in piping. Conforms to ASTM D2466.
|
|
|
|
|
|
|
|
|
|
|
|
|
Gray fittings used for sprinkler systems where an extension is needed for the sprinkler head to be above ground level. Also may be used to prevent damage to the sprinkler head. Teflon thread tape is recommended for threaded joints.
|
Solvent welds directly into fitting socket to form permanent closure. Conforms to ASTM D2466.
|
Adapts from solvent welded line to standard male pipe threads. Teflon thread tape is recommended for threaded joints. Conforms to ASTM D2466.
|
|
|
|
|
|
|
|
|
|
|
|
|
Gray fittings used for sprinkler systems where an extension is needed for the sprinkler head to be above ground level. Also may be used to prevent damage to the sprinkler head. Teflon thread tape is recommended for threaded joints.
|
Used to change direction in piping. Adapts to standard male pipe threads. Teflon thread tape is recommended for threaded joints. Meets ASTM D2466. NSF listed.
|
Gray fittings used for sprinkler systems where an extension is needed for the sprinkler head to be above ground level. Also may be used to prevent damage to the sprinkler head. Teflon thread tape is recommended for threaded joints.
|
|
|
|
|
|
|
|
|
|
|
|
|
Gray fittings used for sprinkler systems where an extension is needed for the sprinkler head to be above ground level. Also may be used to prevent damage to the sprinkler head. Teflon thread tape is recommended for threaded joints.
|
Used to change direction in piping and reduce size. Adapts from solvent welded line to standard male pipe threads. Teflon thread tape is recommended for threaded joints. Conforms to ASTM D2466.
|
Gray fittings used for sprinkler systems where an extension is needed for the sprinkler head to be above ground level. Also may be used to prevent damage to the sprinkler head. Teflon thread tape is recommended for threaded joints.
|
|
|
|
|
|
|
|
|
|
|
|
|
Gray fittings used for sprinkler systems where an extension is needed for the sprinkler head to be above ground level. Also may be used to prevent damage to the sprinkler head. Teflon thread tape is recommended for threaded joints.
|
Adapts to standard female pipe threads. Teflon thread tape is recommended for threaded joints. Conforms to ASTM D2466.
|
Used to change direction in piping. Conforms to ASTM D2466.
|
|
|
|
|
|
|
|
|
|
|
|
|
Adapts to standard female pipe threads. Teflon thread tape is recommended for threaded joints. Conforms to ASTM D2466.
|
Adapts to standard female pipe threads. Teflon thread tape is recommended for threaded joints. Conforms to ASTM D2466.
|
Used to change direction in piping. Conforms to ASTM D2466.
|
|
|
|
|
|
|
|
|
|
|
|
|
Gray fittings used for sprinkler systems where an extension is needed for the sprinkler head to be above ground level. Also may be used to prevent damage to the sprinkler head. Teflon thread tape is recommended for threaded joints.
|
Adapts to standard female pipe threads. Teflon thread tape is recommended for threaded joints. Conforms to ASTM D2466.
|
Gray fittings used for sprinkler systems where an extension is needed for the sprinkler head to be above ground level. Also may be used to prevent damage to the sprinkler head. Teflon thread tape is recommended for threaded joints.
|
|
|
|
|
|
|
|
|
|
|
|
|
Gray fittings used for sprinkler systems where an extension is needed for the sprinkler head to be above ground level. Also may be used to prevent damage to the sprinkler head. Teflon thread tape is recommended for threaded joints.
|
Gray fittings used for sprinkler systems where an extension is needed for the sprinkler head to be above ground level. Also may be used to prevent damage to the sprinkler head. Teflon thread tape is recommended for threaded joints.
|
Gray fittings used for sprinkler systems where an extension is needed for the sprinkler head to be above ground level. Also may be used to prevent damage to the sprinkler head. Teflon thread tape is recommended for threaded joints.
|
|
|
|
|
|
|
|
|
|
|
|
|
Adapts to standard female pipe threads. Teflon thread tape is recommended for threaded joints. Conforms to ASTM D2466.
|
Used to change direction in piping. Conforms to ASTM D2466.
|
Used to change direction in piping. Conforms to ASTM D2466.
|
|
|
|
|
|
|
|
|
|
|
|
|
Cross-linked, high-density polyethylene tubing for use in hot and cold potable water distribution systems.
|
Used to connect threaded sprinkler risers to underground systems. Adapts to standard male pipe threads. Teflon thread tape is recommended for threaded joints. Conforms to ASTM D2466.
|
Used to connect threaded sprinkler risers to underground systems. Adapts to standard male pipe threads. Teflon thread tape is recommended for threaded joints. Conforms to ASTM D2466.
|
|
|
|
|
|
|
|
|
|
|
|
|
Gray fittings used for sprinkler systems where an extension is needed for the sprinkler head to be above ground level. Also may be used to prevent damage to the sprinkler head. Teflon thread tape is recommended for threaded joints.
|
Gray fittings used for sprinkler systems where an extension is needed for the sprinkler head to be above ground level. Also may be used to prevent damage to the sprinkler head. Teflon thread tape is recommended for threaded joints.
|
Solvent welds directly into fitting socket to form permanent closure. Conforms to ASTM D2466.
|
|
|
|
|
|
|
|
|
|
|
|
|
Used to change direction in piping. Conforms to ASTM D2466.
|
Used to change direction in piping. Conforms to ASTM D2466.
|
Gray fittings used for sprinkler systems where an extension is needed for the sprinkler head to be above ground level. Also may be used to prevent damage to the sprinkler head. Teflon thread tape is recommended for threaded joints.
|
|
|
|
|
|
|
|
|
|
|
|
|
Gray fittings used for sprinkler systems where an extension is needed for the sprinkler head to be above ground level. Also may be used to prevent damage to the sprinkler head. Teflon thread tape is recommended for threaded joints.
|
Gray fittings used for sprinkler systems where an extension is needed for the sprinkler head to be above ground level. Also may be used to prevent damage to the sprinkler head. Teflon thread tape is recommended for threaded joints.
|
Adapts to standard female pipe threads. Teflon thread tape is recommended for threaded joints. Conforms to ASTM D2466.
|
|
|
|
|
|
|
|
|
|
|
|
|
Gray fittings used for sprinkler systems where an extension is needed for the sprinkler head to be above ground level. Also may be used to prevent damage to the sprinkler head. Teflon thread tape is recommended for threaded joints.
|
Gray fittings used for sprinkler systems where an extension is needed for the sprinkler head to be above ground level. Also may be used to prevent damage to the sprinkler head. Teflon thread tape is recommended for threaded joints.
|
Inserts into fitting hub to reduce to smaller pipe size in drain-waste-vent applications.
|
|
|
|
|
|
|
|
|
|
|
|
|
Used for permanently or temporarily capping pipe in drain-waste-vent applications.
|
Used to change direction in piping. Conforms to ASTM D2466.
|
Gray fittings used for sprinkler systems where an extension is needed for the sprinkler head to be above ground level. Also may be used to prevent damage to the sprinkler head. Teflon thread tape is recommended for threaded joints.
|
|
|
|
|
|
|
|
|
|
|
|
|
Used to change direction in piping. Conforms to ASTM D2466.
|
Gray fittings used for sprinkler systems where an extension is needed for the sprinkler head to be above ground level. Also may be used to prevent damage to the sprinkler head. Teflon thread tape is recommended for threaded joints.
|
Gray fittings used for sprinkler systems where an extension is needed for the sprinkler head to be above ground level. Also may be used to prevent damage to the sprinkler head. Teflon thread tape is recommended for threaded joints.
|
|
|
|
|
|
|
|
|
|
|
|
|
Gray fittings used for sprinkler systems where an extension is needed for the sprinkler head to be above ground level. Also may be used to prevent damage to the sprinkler head. Teflon thread tape is recommended for threaded joints.
|
Inserts into fitting hub to reduce to smaller pipe size in drain-waste-vent applications.
|
Gray fittings used for sprinkler systems where an extension is needed for the sprinkler head to be above ground level. Also may be used to prevent damage to the sprinkler head. Teflon thread tape is recommended for threaded joints.
|
|
|
|
|
|
|
|
|
|
|
|
|
Gray fittings used for sprinkler systems where an extension is needed for the sprinkler head to be above ground level. Also may be used to prevent damage to the sprinkler head. Teflon thread tape is recommended for threaded joints.
|
Gray fittings used for sprinkler systems where an extension is needed for the sprinkler head to be above ground level. Also may be used to prevent damage to the sprinkler head. Teflon thread tape is recommended for threaded joints.
|
Used to change direction in piping. Conforms to ASTM D2466.
|
|
|
|
|
|
|
|
|
|
|
|
|
Used to change direction in piping inside a 2" x 4" stud wall construction for drain-waste-vent applications. Sometimes called an eighth bend.
|
Used to connect threaded sprinkler risers to underground systems. Adapts to standard male pipe threads. Teflon thread tape is recommended for threaded joints. Conforms to ASTM D2466.
|
Gray fittings used for sprinkler systems where an extension is needed for the sprinkler head to be above ground level. Also may be used to prevent damage to the sprinkler head. Teflon thread tape is recommended for threaded joints.
|
|
|
|
|
|
|
|
|
|
|
|
|
Gray fittings used for sprinkler systems where an extension is needed for the sprinkler head to be above ground level. Also may be used to prevent damage to the sprinkler head. Teflon thread tape is recommended for threaded joints.
|
Gray fittings used for sprinkler systems where an extension is needed for the sprinkler head to be above ground level. Also may be used to prevent damage to the sprinkler head. Teflon thread tape is recommended for threaded joints.
|
Gray fittings used for sprinkler systems where an extension is needed for the sprinkler head to be above ground level. Also may be used to prevent damage to the sprinkler head. Teflon thread tape is recommended for threaded joints.
|
|
|
|
|
|
|
|
|
|
|
|
|
Used to change direction in piping. Adapts to standard male pipe threads. Teflon thread tape is recommended for threaded joints. Conforms to ASTM D2466.
|
Used for permanently or temporarily capping pipe in drain-waste-vent applications.
|
Inserts into fitting hub to reduce to smaller pipe size. For use inside a 2" x 4" stud wall construction in drain-waste-vent applications.
|
|
|
|
|
|
|
|
|
|
|
|
|
Gray fittings used for sprinkler systems where an extension is needed for the sprinkler head to be above ground level. Also may be used to prevent damage to the sprinkler head. Teflon thread tape is recommended for threaded joints.
|
Cross-linked, high-density polyethylene tubing for use in hot and cold potable water distribution systems.
|
Cross-linked, high-density polyethylene tubing for use in hot and cold potable water distribution systems.
|
|
|
|
|
|
|
|
|
|
|
|
|
Inserts into fitting hub to reduce to smaller pipe size in drain-waste-vent applications.
|
Inserts into fitting hub to reduce to smaller pipe size in drain-waste-vent applications.
|
Gray fittings used for sprinkler systems where an extension is needed for the sprinkler head to be above ground level. Also may be used to prevent damage to the sprinkler head. Teflon thread tape is recommended for threaded joints.
|
|
|
|
|
|
|
|
|
|
|
|
|
Gray fittings used for sprinkler systems where an extension is needed for the sprinkler head to be above ground level. Also may be used to prevent damage to the sprinkler head. Teflon thread tape is recommended for threaded joints.
|
Adapts from solvent welded line to standard male pipe threads. Teflon thread tape is recommended for threaded joints. Conforms to ASTM D2466.
|
Used for permanently or temporarily capping pipe inside a 2" x 4" stud wall construction in drain-waste-vent applications.
|
|
|
|
|
|
|
|
|
|
|
|
|
Flush sleeve adapts a Schedule 40 IPS fitting hub to Schedule 30 pipe size. Bagged.
|
Used for permanently or temporarily capping pipe in drain-waste-vent applications.
|
Cross-link polyethylene tubing rated SDR9 PEX-a B137.5 Potable. NSF Listed. ASTM F876/F877. 160 PSI at 73.4 degrees Fahrenheit, 100 PSI at 180 degrees, 80 PSI at 200 degrees. With blue markings. Bar coded.
|
|
|
|
|
|
|
|
|
|
|
|
|
Cross-link polyethylene tubing rated SDR9 PEX-a B137.5 Potable. NSF Listed. ASTM F876/F877. 160 PSI at 73.4 degrees Fahrenheit, 100 PSI at 180 degrees, 80 PSI at 200 degrees. With blue markings. Bar coded.
|
Gray fittings used for sprinkler systems where an extension is needed for the sprinkler head to be above ground level. Also may be used to prevent damage to the sprinkler head. Teflon thread tape is recommended for threaded joints.
|
Gray fittings used for sprinkler systems where an extension is needed for the sprinkler head to be above ground level. Also may be used to prevent damage to the sprinkler head. Teflon thread tape is recommended for threaded joints.
|
|
|
|
|
|
|
|
|
|
|
|
|
Used to change direction in piping. Conforms to ASTM D2466.
|
Used to change direction in piping. Conforms to ASTM D2466.
|
Gray fittings used for sprinkler systems where an extension is needed for the sprinkler head to be above ground level. Also may be used to prevent damage to the sprinkler head. Teflon thread tape is recommended for threaded joints.
|
|
|
|
|
|
|
|
|
|
|
|
|
Cross-linked, high-density polyethylene tubing for use in hot and cold potable water distribution systems.
|
Used when connecting a branch line into a horizontal drain pipe. Also, used in conjunction with a Twist-Lok plug to provide a cleanout in a drain pipe.
|
Used to change direction in piping. Conforms to ASTM D2466.
|
|
|
|
|
|
|
|
|
|
|
|
|
Cross-linked, high-density polyethylene tubing for use in hot and cold potable water distribution systems.
|
Inserts into fitting hub to reduce to smaller pipe size in drain-waste-vent applications.
|
Adapts to standard female pipe threads. Teflon thread tape is recommended for threaded joints. Conforms to ASTM D2466.
|
|
|
|
|
|
|
|
|
|
|
|
|
Used to change direction in piping. Sometimes call a "quarter bend".
|
Used when connecting a branch line into a horizontal drain pipe. Also, used in conjunction with a Twist-Lok plug to provide a cleanout in a drain pipe.
|
Inserts into fitting hub to reduce to smaller pipe size. For use inside a 2" x 4" stud wall construction in drain-waste-vent applications.
|
|
|
|
|
|
|
|
|
|
|
|
|
Used to change direction in piping. Conforms to ASTM D2466.
|
Cross-link polyethylene tubing rated SDR9 PEX-a B137.5 Potable. NSF Listed. ASTM F876/F877. 160 PSI at 73.4 degrees Fahrenheit, 100 PSI at 180 degrees, 80 PSI at 200 degrees. With blue markings. Bar coded.
|
Used for permanently or temporarily capping pipe in drain-waste-vent applications.
|
|
|
|
|
|
|
|
|
|
|
|
|
For use with compression fittings. Made from non-toxic, odorless, tasteless ingredients that meet FDA requirements. Natural in color, light weight, and resistant to stress cracking, it forms a solid barrier to gases, vapor, and moisture.
|
For electric water heaters only. Heavy duty polypropylene. Dual size 1 inch to 1.5 inch PVC drain fitting with gaskets included. Sides are 2.5 inches deep. Pre-cut side opening for drain fitting.
|
Turn off electric change you element without draining your water heater, by turning off water at the water heater to create a vacuum. Remove wires from element put quick change tool on neoprene nub behind element add bucket or basin, have new element handy take out and replace you should not lose more then 2" of water.
|
|
|
|
|
|
|
|
|
|
|
|
|
1/4" x 25' poly tubing.
|
Cross-linked, high-density polyethylene tubing for use in hot and cold potable water distribution systems.
|
Cross-linked, high-density polyethylene tubing for use in hot and cold potable water distribution systems.
|
|
|
|
|
|
|
|
|
|
|
|
|
Used to change direction in piping. Conforms to ASTM D2466.
|
For electric water heaters only. Heavy duty polypropylene. Dual size 1 inch to 1.5 inch PVC drain fitting with gaskets included. Sides are 2.5 inches deep. Pre-cut side opening for drain fitting.
|
Test your elements and thermostats while still in the water heater. 1 piece.
|
|
|
|
|
|
|
|
|
|
|
|
|
For electric water heaters only. Heavy duty polypropylene. Dual size 1 inch to 1.5 inch PVC drain fitting with gaskets included. Sides are 2.5 inches deep. Pre-cut side opening for drain fitting.
|
Adapts 3" Schedule 30 pipe to 4" sewer pipe inside a 2" x 4" stud wall construction in drain-waste-vent applications.
|
Used to change direction in piping. Conforms to ASTM D2466.
|
|
|
|
|
|
|
|
|
|
|
|
|
For electric water heaters only. Heavy duty polypropylene. Dual size 1 inch to 1.5 inch PVC drain fitting with gaskets included. Sides are 2.5 inches deep. Pre-cut side opening for drain fitting.
|
Designed to prevent diffusion of oxygen into hydronic radiant heating systems. A layer of polymer is laminated to the outside surface which is highly resistant to the passage of oxygen. Oxygen Barrier PEX tubing is good for hydronic radiant heating, cooling, and snow melting systems using water or water/glycol mix. The tubing may be installed in concrete, gypsum based lightweight concrete, sand, asphalt, in or under wood flooring, or behind wallboard or plaster. Oxygen Barrier PEX tubing may also be used as transfer lines for baseboard heating systems with a maximum operating temperature of 200 Deg F at 80 psi.
|
Fits standard 1/2" socket drive to replace screw-in water heater elements.
|
|
|
|
|
|
|
|
|
|
|
|
|
Cross-linked, high-density polyethylene tubing for use in hot and cold potable water distribution systems.
|
Cross-linked, high-density polyethylene tubing for use in hot and cold potable water distribution systems.
|
For gas or electric water heaters. Dual size 1 inch to 1.5 inch PVC drain fitting with gaskets included. Sides are 2.5 inches deep. Pre-cut side opening for drain fitting.
|
|
|
|
|
|
|
|
|
|
|
|
|
Used to change direction in piping. Conforms to ASTM D2466.
|
Lightweight, low pressure, manufactured from selected resins and designed specifically for non-critical applications such as open-end drain line. Use for farm/ranch water systems, electrical or cable TV conduit, construction, city service lines, sprinkler systems, skating rinks, air conditioning, submersible pumps, etc. NOT TO BE exposed to direct sunlight for extended periods. NOT FOR USE For Compressed Air Systems. Use with insert fittings and stainless steel clamps. Working pressures based on PSI at 73.4 degrees Fahrenheit. At higher temperatures working pressure is less.
|
Inserts into fitting hub to reduce to smaller pipe size in drain-waste-vent applications.
|
|
|
|
|
|
|
|
|
|
|
|
|
For gas or electric water heaters. Dual size 1 inch to 1.5 inch PVC drain fitting with gaskets included. Sides are 2.5 inches deep. Pre-cut side opening for drain fitting.
|
Used for permanently or temporarily capping pipe in drain-waste-vent applications.
|
For use with compression fittings. Made from non-toxic, odorless, tasteless ingredients that meet FDA requirements. Natural in color, light weight, and resistant to stress cracking, it forms a solid barrier to gases, vapor, and moisture.
|
|
|
|
|
|
|
|
|
|
|
|
|
For gas or electric water heaters. Dual size 1 inch to 1.5 inch PVC drain fitting with gaskets included. Sides are 2.5 inches deep. Pre-cut side opening for drain fitting.
|
Contains everything that you need to replace the thermocouple and burner gasket on your Richmond FVIR gas water heater. The kit is required anytime the burner door is removed from the unit so that the gasket can be replaced. Kit ensures safe and reliable operation. Kit includes: Burner door gasket, tinnerman clips, screws, torx head driver and instructions. For use on Richmond, Rheem, Ruud and GE FVIR water heaters. Genuine OEM replacement part.
|
For gas or electric water heaters. Dual size 1 inch to 1.5 inch PVC drain fitting with gaskets included. Sides are 2.5 inches deep. Pre-cut side opening for drain fitting.
|
|
|
|
|
|
|
|
|
|
|
|
|
Contains everything that you need to replace the thermocouple and burner gasket on your Richmond FVIR gas water heater. The kit is required anytime the burner door is removed from the unit so that the gasket can be replaced. Kit ensures safe and reliable operation. Kit includes: 24" thermocouple, burner door gasket, tinnerman clips, screws, torx head driver and instructions. For use on Richmond, Rheem, Ruud and GE FVIR water heaters. Genuine OEM replacement part.
|
3" x 48" x 75" vinyl faced fiberglass water heater insulation blanket, R value 10.0, fits up to 60 gallon tank, plastic tape. For gas, oil or electric water heaters.
|
White vinyl backed fiberglass blanket. Designed for gas, oil or electric heaters. Fits up to 60 gallons. Includes adhesive tape for easy installation. Bagged.
|
|
|
|
|
|
|
|
|
|
|
|
|
Lightweight, low pressure, manufactured from selected resins and designed specifically for non-critical applications such as open-end drain line. Use for farm/ranch water systems, electrical or cable TV conduit, construction, city service lines, sprinkler systems, skating rinks, air conditioning, submersible pumps, etc. NOT TO BE exposed to direct sunlight for extended periods. NOT FOR USE For Compressed Air Systems. Use with insert fittings and stainless steel clamps. Working pressures based on PSI at 73.4 degrees Fahrenheit. At higher temperatures working pressure is less.
|
PE4710 high-density, manufactured from selected resins. Use for farm/ranch water systems, electrical or cable TV conduit, construction and excavations, city service lines, mine and industrial drainage, sprinkler systems, irrigation, skating rinks, air conditioning, submersible pumps, etc. NOT TO BE exposed to direct sunlight for extended periods. NOT FOR USE For Compressed Air Systems. Use with insert fittings and stainless steel clamps. Meets or exceeds ASTM-D2239. NSF Approved for drinking water use. Working pressures based on PSI at 73.4 degrees Fahrenheit. At higher temperature working pressure is less.
|
Reduces heat loss from water tank. R value equals 6.7. Will insulate up to a 60 gallon tank. 2" x 48" x 75" blanket per bag.
|
|
|
|
|
|
|
|
|
|
|
|
|
Cross-linked, high-density polyethylene tubing for use in hot and cold potable water distribution systems.
|
PE4710 high-density, manufactured from selected resins. Use for farm/ranch water systems, electrical or cable TV conduit, construction and excavations, city service lines, mine and industrial drainage, sprinkler systems, irrigation, skating rinks, air conditioning, submersible pumps, etc. NOT TO BE exposed to direct sunlight for extended periods. NOT FOR USE For Compressed Air Systems. Use with insert fittings and stainless steel clamps. Meets or exceeds ASTM-D2239. NSF Approved for drinking water use. Working pressures based on PSI at 73.4 degrees Fahrenheit. At higher temperature working pressure is less.
|
PE4710 high-density, manufactured from selected resins. Use for farm/ranch water systems, electrical or cable TV conduit, construction and excavations, city service lines, mine and industrial drainage, sprinkler systems, irrigation, skating rinks, air conditioning, submersible pumps, etc. NOT TO BE exposed to direct sunlight for extended periods. NOT FOR USE For Compressed Air Systems. Use with insert fittings and stainless steel clamps. Meets or exceeds ASTM-D2239. NSF Approved for drinking water use. Working pressures based on PSI at 73.4 degrees Fahrenheit. At higher temperature working pressure is less.
|
|
|
|
|
|
|
|
|
|
|
|
|
For gas or electric water heaters. Dual size 1 inch to 1.5 inch PVC drain fitting with gaskets included. Sides are 2.5 inches deep. Pre-cut side opening for drain fitting.
|
PE4710 high-density, manufactured from selected resins. Use for farm/ranch water systems, electrical or cable TV conduit, construction and excavations, city service lines, mine and industrial drainage, sprinkler systems, irrigation, skating rinks, air conditioning, submersible pumps, etc. NOT TO BE exposed to direct sunlight for extended periods. NOT FOR USE For Compressed Air Systems. Use with insert fittings and stainless steel clamps. Meets or exceeds ASTM-D2239. NSF Approved for drinking water use. Working pressures based on PSI at 73.4 degrees Fahrenheit. At higher temperature working pressure is less.
|
For use with potable water. 250 psi. CTS polyethylene pipe. PE 4710 high density, manufactured from select resins. NOT TO BE exposed to direct sunlight for extended periods. NOT FOR USE for compressed air systems. Use with compression fittings. Meets or exceeds ASTM D-2737. NSF approved for drinking water use. Working pressure based on PSI at 73.4 degrees Fahrenheit. At higher temperature working pressure is less.AWWA C-901
|
|
|
|
|
|
|
|
|
|
|
|
|
For use with compression fittings. Made from non-toxic, odorless, tasteless ingredients that meet FDA requirements. Natural in color, light weight, and resistant to stress cracking, it forms a solid barrier to gases, vapor, and moisture.
|
Lightweight, low pressure, manufactured from selected resins and designed specifically for non-critical applications such as open-end drain line. Use for farm/ranch water systems, electrical or cable TV conduit, construction, city service lines, sprinkler systems, skating rinks, air conditioning, submersible pumps, etc. NOT TO BE exposed to direct sunlight for extended periods. NOT FOR USE For Compressed Air Systems. Use with insert fittings and stainless steel clamps. Working pressures based on PSI at 73.4 degrees Fahrenheit. At higher temperatures working pressure is less.
|
Aluminum pan for gas or electric water heaters, 32" internal diameter, will not rust or crack, PVC fitting included.
|
|
|
|
|
|
|
|
|
|
|
|
|
Used on gas, oil, or electric, direct-fired, residential water heater and hot water storage tank applications to absorb the increased volume of water created by thermal expansion. It also maintains balanced pressure throughout the water supply system by keeping system pressure below the T&P relief valve setting. It is a pre-pressurized, field-adjustable steel tank with an FDA-approved Butyl rubber diaphragm, and brass 3/4 in. (20mm) inlet connection. An expansion membrane prevents air-to-water contact in the tank ensuring a long system life. IAMPO listed and ANSI/NSF 61 certified. Maximum Pressure: 150psi (10 bar).
|
Cross-linked, high-density polyethylene tubing for use in hot and cold potable water distribution systems.
|
Cross-linked, high-density polyethylene tubing for use in hot and cold potable water distribution systems.
|
|
|
|
|
|
|
|
|
|
|
|
|
Cross-linked, high-density polyethylene tubing for use in hot and cold potable water distribution systems.
|
For use with compression fittings. Made from non-toxic, odorless, tasteless ingredients that meet FDA requirements. Natural in color, light weight, and resistant to stress cracking, it forms a solid barrier to gases, vapor, and moisture.
|
Cross-linked, high-density polyethylene tubing for use in hot and cold potable water distribution systems.
|
|
|
|
|
|
|
|
|
|
|
|
|
Cross-linked, high-density polyethylene tubing for use in hot and cold potable water distribution systems.
|
Includes 1" and 1-1/2" dual size PVC drain fitting. Injection molded for superior strength. Will not rust or corrode. Fits most tankless water heaters with a maximum depth of 13" and width of 20-1/2".Protect finished areas from water damage.
|
PE4710 high-density, manufactured from selected resins. Use for farm/ranch water systems, electrical or cable TV conduit, construction and excavations, city service lines, mine and industrial drainage, sprinkler systems, irrigation, skating rinks, air conditioning, submersible pumps, etc. NOT TO BE exposed to direct sunlight for extended periods. NOT FOR USE For Compressed Air Systems. Use with insert fittings and stainless steel clamps. Meets or exceeds ASTM-D2239. NSF Approved for drinking water use. Working pressures based on PSI at 73.4 degrees Fahrenheit. At higher temperature working pressure is less.
|
|
|
|
|
|
|
|
|
|
|
|
|
PE4710 high-density, manufactured from selected resins. Use for farm/ranch water systems, electrical or cable TV conduit, construction and excavations, city service lines, mine and industrial drainage, sprinkler systems, irrigation, skating rinks, air conditioning, submersible pumps, etc. NOT TO BE exposed to direct sunlight for extended periods. NOT FOR USE For Compressed Air Systems. Use with insert fittings and stainless steel clamps. Meets or exceeds ASTM-D2239. NSF Approved for drinking water use. Working pressures based on PSI at 73.4 degrees Fahrenheit. At higher temperature working pressure is less.
|
PE4710 high-density, manufactured from selected resins. Use for farm/ranch water systems, electrical or cable TV conduit, construction and excavations, city service lines, mine and industrial drainage, sprinkler systems, irrigation, skating rinks, air conditioning, submersible pumps, etc. NOT TO BE exposed to direct sunlight for extended periods. NOT FOR USE For Compressed Air Systems. Use with insert fittings and stainless steel clamps. Meets or exceeds ASTM-D2239. NSF Approved for drinking water use. Working pressures based on PSI at 73.4 degrees Fahrenheit. At higher temperature working pressure is less.
|
For use with potable water. 250 psi. CTS polyethylene pipe. PE 4710 high density, manufactured from select resins. NOT TO BE exposed to direct sunlight for extended periods. NOT FOR USE for compressed air systems. Use with compression fittings. Meets or exceeds ASTM D-2737. NSF approved for drinking water use. Working pressure based on PSI at 73.4 degrees Fahrenheit. At higher temperature working pressure is less.AWWA C-901
|
|
|
|
|
|
|
|
|
|
|
|
|
PE4710 high-density, manufactured from selected resins. Use for farm/ranch water systems, electrical or cable TV conduit, construction and excavations, city service lines, mine and industrial drainage, sprinkler systems, irrigation, skating rinks, air conditioning, submersible pumps, etc. NOT TO BE exposed to direct sunlight for extended periods. NOT FOR USE For Compressed Air Systems. Use with insert fittings and stainless steel clamps. Meets or exceeds ASTM-D2239. NSF Approved for drinking water use. Working pressures based on PSI at 73.4 degrees Fahrenheit. At higher temperature working pressure is less.
|
Stand for gas water heaters from 30 to 50 gallons, constructed of galvanized steel, minimal assembly required, for use with all residential water heaters. 21" x 21" x 18"
|
PE4710 high-density, manufactured from selected resins. Use for farm/ranch water systems, electrical or cable TV conduit, construction and excavations, city service lines, mine and industrial drainage, sprinkler systems, irrigation, skating rinks, air conditioning, submersible pumps, etc. NOT TO BE exposed to direct sunlight for extended periods. NOT FOR USE For Compressed Air Systems. Use with insert fittings and stainless steel clamps. Meets or exceeds ASTM-D2239. NSF Approved for drinking water use. Working pressures based on PSI at 73.4 degrees Fahrenheit. At higher temperature working pressure is less.
|
|
|
|
|
|
|
|
|
|
|
|
|
Lightweight, low pressure, manufactured from selected resins and designed specifically for non-critical applications such as open-end drain line. Use for farm/ranch water systems, electrical or cable TV conduit, construction, city service lines, sprinkler systems, skating rinks, air conditioning, submersible pumps, etc. NOT TO BE exposed to direct sunlight for extended periods. NOT FOR USE For Compressed Air Systems. Use with insert fittings and stainless steel clamps. Working pressures based on PSI at 73.4 degrees Fahrenheit. At higher temperatures working pressure is less.
|
For gas or electric water heaters, aluminum will not rust, corrode, or crack. Fits most tankless water heaters with a maximum depth of 13" and width of 20-1/2". Protect finished areas from water damage.
|
Used on gas, oil, or electric, direct-fired, residential water heater and hot water storage tank applications to absorb the increased volume of water created by thermal expansion. It also maintains balanced pressure throughout the water supply system by keeping system pressure below the T&P relief valve setting. It is a pre-pressurized, field-adjustable steel tank with an FDA-approved Butyl rubber diaphragm, and brass 3/4 in. (20mm) inlet connection. An expansion membrane prevents air-to-water contact in the tank ensuring a long system life. IAMPO listed and ANSI/NSF 61 certified. Maximum Pressure: 150psi (10 bar).
|
|
|
|
|
|
|
|
|
|
|
|
|
Lightweight, low pressure, manufactured from selected resins and designed specifically for non-critical applications such as open-end drain line. Use for farm/ranch water systems, electrical or cable TV conduit, construction, city service lines, sprinkler systems, skating rinks, air conditioning, submersible pumps, etc. NOT TO BE exposed to direct sunlight for extended periods. NOT FOR USE For Compressed Air Systems. Use with insert fittings and stainless steel clamps. Working pressures based on PSI at 73.4 degrees Fahrenheit. At higher temperatures working pressure is less.
|
PE4710 high-density, manufactured from selected resins. Use for farm/ranch water systems, electrical or cable TV conduit, construction and excavations, city service lines, mine and industrial drainage, sprinkler systems, irrigation, skating rinks, air conditioning, submersible pumps, etc. NOT TO BE exposed to direct sunlight for extended periods. NOT FOR USE For Compressed Air Systems. Use with insert fittings and stainless steel clamps. Meets or exceeds ASTM-D2239. NSF Approved for drinking water use. Working pressures based on PSI at 73.4 degrees Fahrenheit. At higher temperature working pressure is less.
|
PE4710 high-density, manufactured from selected resins. Use for farm/ranch water systems, electrical or cable TV conduit, construction and excavations, city service lines, mine and industrial drainage, sprinkler systems, irrigation, skating rinks, air conditioning, submersible pumps, etc. NOT TO BE exposed to direct sunlight for extended periods. NOT FOR USE For Compressed Air Systems. Use with insert fittings and stainless steel clamps. Meets or exceeds ASTM-D2239. NSF Approved for drinking water use. Working pressures based on PSI at 73.4 degrees Fahrenheit. At higher temperature working pressure is less.
|
|
|
|
|
|
|
|
|
|
|
|
|
FDA Grade, suitable for use with air and water lines, use as pneumatic control line, for use with compression style fittings.
|
Cross-linked, high-density polyethylene tubing for use in hot and cold potable water distribution systems.
|
Cross-linked, high-density polyethylene tubing for use in hot and cold potable water distribution systems.
|
|
|
|
|
 |