Home > PLUMBING > ROUGH PLUMBING SUPPLIES > PIPE REPAIR > PIPE GUARDS
Choose a sub category:
PVC FITTINGS - COUPLINGS PVC FITTINGS - COUPLINGS PVC FITTINGS - UNIONS
PVC FITTINGS - UNIONS PVC FITTINGS - CAPS PVC FITTINGS - CAPS
PVC FITTINGS - ADAPTERS PVC FITTINGS - ADAPTERS PVC FITTINGS - BUSHINGS
PVC FITTINGS - BUSHINGS PVC FITTINGS - ELBOWS PVC FITTINGS - ELBOWS
PVC FITTINGS - TEES & CROSSES PVC FITTINGS - TEES & CROSSES PVC FITTINGS - PLUGS
PVC FITTINGS - PLUGS
Sort By:
1
Genova Products 30705 PVC 90 Degree Elbow Genova Products 33905 PVC 90 Degree Elbow Genova Products 30707 PVC 90 Degree Elbow
Used to change direction in piping. Conforms to ASTM D2466. Adapts from solvent welded line to standard male pipe threads. Teflon thread tape is recommended for threaded joints. Conforms to ASTM D2466. Used to change direction in piping. Conforms to ASTM D2466.
B&K G85-300HC Stud Guard Genova Products 34175 PVC 90 Degree Elbow Genova Products 30605 PVC 45 Degree Elbow
Protects pipes and wiring installation. Used to change direction in piping and reduce size. Adapts from solvent welded line to standard male pipe threads. Teflon thread tape is recommended for threaded joints. Conforms to ASTM D2466. Used to change direction in piping. Conforms to ASTM D2466.
Genova Products 33907 PVC 90 Degree Elbow Genova 30775 PVC Fitting Genova 32805 PVC Fitting
Adapts from solvent welded line to standard male pipe threads. Teflon thread tape is recommended for threaded joints. Conforms to ASTM D2466. Used to change direction in piping. Fitting reduces to smaller pipe size. Conforms to ASTM D2466. Adapts to standard female pipe threads. Teflon thread tape is recommended for threaded joints. Conforms to ASTM D2466.
Genova 300 Solvent Weld Pipe Plug B&K G85-500HC Stud Guard Genova Products 32807 PVC 90 Degree Street Elbow
Solvent welds directly into fitting socket to form permanent closure. Conforms to ASTM D2466. Protects pipes and wiring installation. Adapts to standard female pipe threads. Teflon thread tape is recommended for threaded joints. Conforms to ASTM D2466.
Genova 300 Solvent Weld Pipe Plug Genova 33910 PVC Fitting Genova 300 Solvent Weld Pipe Plug
Solvent welds directly into fitting socket to form permanent closure. Conforms to ASTM D2466. Adapts from solvent welded line to standard male pipe threads. Teflon thread tape is recommended for threaded joints. Conforms to ASTM D2466. Adapts to standard female pipe threads. Teflon thread tape is recommended for threaded joints. Conforms to ASTM D2466.
Genova 33705 PVC Fitting Genova Products 30710 PVC 90 Degree Elbow Genova 32905 PVC Fitting
Used to change direction in piping. Adapts to standard male pipe threads. Teflon thread tape is recommended for threaded joints. Conforms to ASTM D2466. Used to change direction in piping. Conforms to ASTM D2466. Used to change direction in piping. Conforms to ASTM D2466.
Genova Products 30607 PVC 45 Degree Elbow WASHER WATER HEATER SUPPLY    Genova Products 30610 PVC 45 Degree Elbow
Used to change direction in piping. Conforms to ASTM D2466. Designed to be used with a 3/4" diameter supply connector to seal the connection. 13/16 x 1" Used to change direction in piping. Conforms to ASTM D2466.
B&K G85-900HC Stud Guard Genova 32705 PVC Fitting Genova 32907 PVC Fitting
Protects pipes and wiring installation. Used to change direction in piping. Adapts to standard male pipe threads. Teflon thread tape is recommended for threaded joints. Meets ASTM D2466. NSF listed. Used to change direction in piping. Conforms to ASTM D2466.
Genova 300 Solvent Weld Pipe Plug Genova 34115 PVC Fitting Genova 300 Solvent Weld Pipe Plug
Adapts to standard female pipe threads. Teflon thread tape is recommended for threaded joints. Conforms to ASTM D2466. Used to change direction in piping and reduce size. Adapts from solvent welded line to standard male pipe threads. Teflon thread tape is recommended for threaded joints. Conforms to ASTM D2466. Solvent welds directly into fitting socket to form permanent closure. Conforms to ASTM D2466.
Genova 30716 PVC Fitting Genova Products 30614 PVC 45 Degree Elbow Genova 32707 PVC Fitting
Used to change direction in piping. Fitting reduces to smaller pipe size. Conforms to ASTM D2466. Used to change direction in piping. Conforms to ASTM D2466. Used to change direction in piping. Adapts to standard male pipe threads. Teflon thread tape is recommended for threaded joints. Meets ASTM D2466. NSF listed.
Genova 30717 PVC Fitting Genova 300 Solvent Weld Pipe Plug Genova 33707 PVC Fitting
Used to change direction in piping. Fitting reduces to smaller pipe size. Conforms to ASTM D2466. Solvent welds directly into fitting socket to form permanent closure. Conforms to ASTM D2466. Used to change direction in piping. Adapts to standard male pipe threads. Teflon thread tape is recommended for threaded joints. Conforms to ASTM D2466.
Genova 33914 PVC Fitting Genova 32810 PVC Fitting Genova Products 30714 PVC 90 Degree Elbow
Adapts from solvent welded line to standard male pipe threads. Teflon thread tape is recommended for threaded joints. Conforms to ASTM D2466. Adapts to standard female pipe threads. Teflon thread tape is recommended for threaded joints. Conforms to ASTM D2466. Used to change direction in piping. Conforms to ASTM D2466.
Genova 300 Solvent Weld Pipe Plug Genova 33915 PVC Fitting Genova M32705 PVC Fitting
Solvent welds directly into fitting socket to form permanent closure. Conforms to ASTM D2466. Adapts from solvent welded line to standard male pipe threads. Teflon thread tape is recommended for threaded joints. Conforms to ASTM D2466. Used to change direction in piping. Adapts to standard male pipe threads. Teflon thread tape is recommended for threaded joints. Meets ASTM D2466. NSF listed.
Genova 34117 PVC Fitting Genova 300 Solvent Weld Pipe Plug Genova Products 30615 PVC 45 Degree Elbow
Used to change direction in piping and reduce size. Adapts from solvent welded line to standard male pipe threads. Teflon thread tape is recommended for threaded joints. Conforms to ASTM D2466. Adapts to standard female pipe threads. Teflon thread tape is recommended for threaded joints. Conforms to ASTM D2466. Used to change direction in piping. Conforms to ASTM D2466.
Genova 300 Solvent Weld Pipe Plug Genova 300 Solvent Weld Pipe Plug Genova Products 30715 PVC 90 Degree Elbow
Adapts to standard female pipe threads. Teflon thread tape is recommended for threaded joints. Conforms to ASTM D2466. Adapts to standard female pipe threads. Teflon thread tape is recommended for threaded joints. Conforms to ASTM D2466. Used to change direction in piping. Conforms to ASTM D2466.
Genova 300 Solvent Weld Pipe Plug B&K G86-800HC Stud Plate Genova 32814 PVC Fitting
Adapts to standard female pipe threads. Teflon thread tape is recommended for threaded joints. Conforms to ASTM D2466. Protects pipes and wiring installation. Adapts to standard female pipe threads. Teflon thread tape is recommended for threaded joints. Conforms to ASTM D2466.
Genova 32910 PVC Fitting Genova Products 30620 PVC 45 Degree Elbow Danco 88493 Water Heater Washer
Used to change direction in piping. Conforms to ASTM D2466. Used to change direction in piping. Conforms to ASTM D2466. Water heater supply line washer.
Genova 33175 PVC Fitting Genova 33105 PVC Fitting Genova 300 Solvent Weld Pipe Plug
Used to connect threaded sprinkler risers to underground systems. Adapts to standard male pipe threads. Teflon thread tape is recommended for threaded joints. Conforms to ASTM D2466. Used to connect threaded sprinkler risers to underground systems. Adapts to standard male pipe threads. Teflon thread tape is recommended for threaded joints. Conforms to ASTM D2466. Solvent welds directly into fitting socket to form permanent closure. Conforms to ASTM D2466.
Genova 32914 PVC Fitting Genova Products 30705CP PVC 90 Degree Elbow Genova 32815 PVC Fitting
Used to change direction in piping. Conforms to ASTM D2466. Used to change direction in piping. Conforms to ASTM D2466. Adapts to standard female pipe threads. Teflon thread tape is recommended for threaded joints. Conforms to ASTM D2466.
Genova 30707CP PVC Fitting Genova 32915 PVC Fitting Genova Products 30720 PVC 90 Degree Elbow
Used to change direction in piping. Conforms to ASTM D2466. Used to change direction in piping. Conforms to ASTM D2466. Used to change direction in piping. Conforms to ASTM D2466.
Genova 37205 PVC Fitting PVC UNION FIPXFIP 1/2IN       Genova 33176 PVC Fitting
PVC UNION FIPXFIP 1/2IN
Our Price: $2.86
Union solvent welds directly to PVC pipe and provides a method for future disassembly of piping without cutting. Working pressure: 150 PSI at 73 Deg. Joins to male threaded pipe and provides a method for future disassembly of piping without cutting. PTFE thread tape is recommended for threaded joints. Working pressure: 150 PSI at 73 Deg. Used to connect threaded sprinkler risers to underground systems. Adapts to standard male pipe threads. Teflon thread tape is recommended for threaded joints. Conforms to ASTM D2466.
Camco 11523 Drain Valves Genova 37207 PVC Fitting PVC UNION FIPXFIP 3/4IN
PVC UNION FIPXFIP 3/4IN
Our Price: $3.17
Permanent installation, fits directly into water heater for easy draining. 2-1/2" length. Union solvent welds directly to PVC pipe and provides a method for future disassembly of piping without cutting. Working pressure: 150 PSI at 73 Deg. Joins to male threaded pipe and provides a method for future disassembly of piping without cutting. PTFE thread tape is recommended for threaded joints. Working pressure: 150 PSI at 73 Deg.
Genova 33710 PVC Fitting PVC UNION SXS 1IN             PVC UNION FIPXFIP 1IN
PVC UNION SXS 1IN
Our Price: $3.56
PVC UNION FIPXFIP 1IN
Our Price: $3.72
Used to change direction in piping. Adapts to standard male pipe threads. Teflon thread tape is recommended for threaded joints. Conforms to ASTM D2466. Union solvent welds directly to PVC pipe and provides a method for future disassembly of piping without cutting. Working pressure: 150 PSI at 73 Deg. Joins to male threaded pipe and provides a method for future disassembly of piping without cutting. PTFE thread tape is recommended for threaded joints. Working pressure: 150 PSI at 73 Deg.
Camco Mfg 11061 Dip Tube Camco 07133 Element Gasket Kit NDS U-0750-T PVC Fittings
Anti-siphon hole breaks damaging siphon action. Can be cut to desired length. Made of PEX. With gasket. Everything needed to install flat, screw-in and universal flange elements. Contains:  (1) screw-in gasket, (1) universal flange gasket, (1) four hole gasket and (4) 1/4" - 20 x 3/4" hex bolts. Full port design, used in joining 2 pipes together where a serviceable connection is desired. Acme threads on body and nut eliminate cross threading and prevent nut from creeping under pressure. Rugged Hi-Impact gray PVC Type II construction with EPDM o-ring. Meets ASTM schedule 80 socket standards. Complies with all applicable ASTM and ANSI standards. NSF Listed, IAPMO approved.
NDS U-0750-S PVC Union Genova 33920 PVC Fitting B and K 168-003NL Dielectric Unions
Full port design, used in joining 2 pipes together where a serviceable connection is desired. Acme threads on body and nut eliminate cross threading and prevent nut from creeping under pressure. Rugged Hi-Impact gray PVC Type II construction with EPDM o-ring. Meets ASTM schedule 80 socket standards. Complies with all applicable ASTM and ANSI standards. NSF Listed, IAPMO approved. Adapts from solvent welded line to standard male pipe threads. Teflon thread tape is recommended for threaded joints. Conforms to ASTM D2466. Rated for 250 PSI at 180DegF. Threaded ends comply with ANSI B1.20.1. Solder ends comply to ANSI 16.18.
NDS U-0500-T PVC Fittings NDS U-0500-S PVC Fittings PVC UNION SXS 1-1/4IN
PVC UNION SXS 1-1/4IN
Our Price: $4.90
Full port design, used in joining 2 pipes together where a serviceable connection is desired. Acme threads on body and nut eliminate cross threading and prevent nut from creeping under pressure. Rugged Hi-Impact gray PVC Type II construction with EPDM o-ring. Meets ASTM schedule 80 socket standards. Complies with all applicable ASTM and ANSI standards. NSF Listed, IAPMO approved. Full port design, used in joining 2 pipes together where a serviceable connection is desired. Acme threads on body and nut eliminate cross threading and prevent nut from creeping under pressure. Rugged Hi-Impact gray PVC Type II construction with EPDM o-ring. Meets ASTM schedule 80 socket standards. Complies with all applicable ASTM and ANSI standards. NSF Listed, IAPMO approved. Union solvent welds directly to PVC pipe and provides a method for future disassembly of piping without cutting. Working pressure: 150 PSI at 73 Deg.
Genova 30710CP PVC Fitting NDS U-1000-T PVC Fitting NDS U-1000-S PVC Union
Used to change direction in piping. Conforms to ASTM D2466. Full port design, used in joining 2 pipes together where a serviceable connection is desired. Acme threads on body and nut eliminate cross threading and prevent nut from creeping under pressure. Rugged Hi-Impact gray PVC Type II construction with EPDM o-ring. Meets ASTM schedule 80 socket standards. Complies with all applicable ASTM and ANSI standards. NSF Listed, IAPMO approved. Full port design, used in joining 2 pipes together where a serviceable connection is desired. Acme threads on body and nut eliminate cross threading and prevent nut from creeping under pressure. Rugged Hi-Impact gray PVC Type II construction with EPDM o-ring. Meets ASTM schedule 80 socket standards. Complies with all applicable ASTM and ANSI standards. NSF Listed, IAPMO approved.
Genova Products 32920 PVC 90 Degree Straight Elbow PVC UNION FIPXFIP 1-1/4IN     B K Industries 168-004NL Dielectric Unions
Used to change direction in piping. Conforms to ASTM D2466. Joins to male threaded pipe and provides a method for future disassembly of piping without cutting. PTFE thread tape is recommended for threaded joints. Working pressure: 150 PSI at 73 Deg. Rated for 250 PSI at 180DegF. Threaded ends comply with ANSI B1.20.1. Solder ends comply to ANSI 16.18.
Camco 10623 Dielectric Nipple Camco 2143 High Watt Density Water Heater Element Genova 30790 PVC Fitting
For water heater inlet and outlet hook-ups and other uses where dissimilar metals occur in piping and plumbing systems. Thermoplastic lining prevents corrosion. 2-1/2" length. UL Listed, gasket included. Used to change direction in piping. Conforms to ASTM D2466.
NDS U-1250-T PVC Fittings NDS U-1250-S PVC Union Genova 32820 PVC Fitting
Full port design, used in joining 2 pipes together where a serviceable connection is desired. Acme threads on body and nut eliminate cross threading and prevent nut from creeping under pressure. Rugged Hi-Impact gray PVC Type II construction with EPDM o-ring. Meets ASTM schedule 80 socket standards. Complies with all applicable ASTM and ANSI standards. NSF Listed, IAPMO approved. Full port design, used in joining 2 pipes together where a serviceable connection is desired. Acme threads on body and nut eliminate cross threading and prevent nut from creeping under pressure. Rugged Hi-Impact gray PVC Type II construction with EPDM o-ring. Meets ASTM schedule 80 socket standards. Complies with all applicable ASTM and ANSI standards. NSF Listed, IAPMO approved. Adapts to standard female pipe threads. Teflon thread tape is recommended for threaded joints. Conforms to ASTM D2466.
PVC UNION FIPXFIP 1-1/2IN     PVC UNION SXS 1-1/2IN         B and K 167-004NL Dielectric Unions
PVC UNION SXS 1-1/2IN
Our Price: $6.47
Joins to male threaded pipe and provides a method for future disassembly of piping without cutting. PTFE thread tape is recommended for threaded joints. Working pressure: 150 PSI at 73 Deg. Union solvent welds directly to PVC pipe and provides a method for future disassembly of piping without cutting. Working pressure: 150 PSI at 73 Deg. Rated for 250 PSI at 180DegF. Threaded ends comply with ANSI B1.20.1. Solder ends comply to ANSI 16.18.
Genova Products 30730 PVC 90 Degree Elbow B and K 102-816 Water Heater Drain Valves WaterFlex 0437012 Corrugated Flexible Water Heater Connector
Used to change direction in piping. Conforms to ASTM D2466. 1-1/4" shank length. Heavy brass construction. Neoprene seal disc. 3/4" hose threaded outlet. Plated steel canopy handle. Pipe threads comply with ANSI B1.20.01. Hose threads comply with ANSI B1.20.7. Connector with nickel plated brass nuts and nitrile rubber sealing washer. Complies with no-lead laws. 3/4" FIP x 3/4" FIP.
Camco 07223 Adapter Kit B and K Industries 168-005NL Dielectric Unions Camco 2343 High Watt Density Water Heater Element
Contains: (1) 2-1/2" 4-bolt, (1) screw-in gasket adapt-a-flange, (1) thermostat bracket, (1) four hole gasket and (4) 5/16" - [no. 18] 5/8" hex bolt-washers. Use a standard screw-in element to replace a flat, universal or round flange element using the element conversion kit. Rated for 250 PSI at 180DegF. Threaded ends comply with ANSI B1.20.1. Solder ends comply to ANSI 16.18. UL Listed, gasket included.
CopperFlex WB034-24N Corrugated Water Heater Connector Camco 11260 Drain Pan With 1 in PVC Fitting Camco 9973 Quick Change Element Tool
Internal dielectric sleeve effectively separates dissimilar metals within the waterway to prevent galvanic and electrolytic corrosion. Nitrile rubber washer is more resilient than PEX and easier to install on rough nipple surfaces. A greater number of thread to thread contact provides a better seal to lined nipples. Specially engineered brass adapter allows direct connection to PEX pipe.  Design-certified and manufactured in accordance with ANSI/ASME A112.18.6, ANSI /NSF-61 (Section 9), CSA B125, UL Laboratories MH25826 report, and NES NER-615 report. For electric water heaters only. Heavy duty polypropylene. Dual size 1 inch to 1.5 inch PVC drain fitting with gaskets included. Sides are 2.5 inches deep. Pre-cut side opening for drain fitting. Turn off electric change you element without draining your water heater, by turning off water at the water heater to create a vacuum. Remove wires from element put quick change tool on neoprene nub behind element add bucket or basin, have new element handy take out and replace you should not lose more then 2" of water.
WaterFlex 0437018 Corrugated Flexible Water Heater Connector Camco 7723 Dual Element Lower Water Heater Thermostat Therm-O-Disc 8123 Dual Element Lower Water Heater Thermostat
Connector with nickel plated brass nuts and nitrile rubber sealing washer. Complies with no-lead laws. 3/4" FIP x 3/4" FIP. UL listed. Meets original specification length for State, Reliance, Kenmore, Bradford White. Energy efficient range setting, built-in safety switch to prevent overheating. UL Listed. Meets original specifications length for Rheem, Ruud, Richmond, A.O.Smith, American and GSW. Energy efficient range setting, built-in safety switch to prevent overheating.
Camco 2203 High Watt Density Water Heater Element Camco Mfg 10473 Pressure Relief Valve 3/4 In PVC UNION FIPXFIP 2IN
PVC UNION FIPXFIP 2IN
Our Price: $9.60
UL Listed, gasket included. 3/4" temperature and pressure relief valve with 4" probe. All brass body, stainless steel spring,  factory set at 150 PS, crafted with no gaskets and epoxy-coated probes to prevent corrosion buildup. ANS Z21.22 design, AGA certified, furnished with test lever. Joins to male threaded pipe and provides a method for future disassembly of piping without cutting. PTFE thread tape is recommended for threaded joints. Working pressure: 150 PSI at 73 Deg.
Camco 4363 High Watt Density Water Heater Element Genova 30630 PVC Fitting Camco 2243 High Watt Density Water Heater Element
UL Listed, gasket included. Used to change direction in piping. Conforms to ASTM D2466. UL Listed, gasket included.
Camco 11460 Drain Pan With 1 in PVC Fitting PVC UNION SXS 2IN             Camco 10023 Water Heater Continuity Tester With Battery
PVC UNION SXS 2IN
Our Price: $9.91
For electric water heaters only. Heavy duty polypropylene. Dual size 1 inch to 1.5 inch PVC drain fitting with gaskets included. Sides are 2.5 inches deep. Pre-cut side opening for drain fitting. Union solvent welds directly to PVC pipe and provides a method for future disassembly of piping without cutting. Working pressure: 150 PSI at 73 Deg. Test your elements and thermostats while still in the water heater. 1 piece.
CopperFlex WB00-12N Water Heater Connector NDS U-1500-T PVC Fitting NDS U-1500-S PVC Union
Internal dielectric sleeve effectively separates dissimilar metals within the waterway to prevent galvanic and electrolytic corrosion. Nitrile rubber washer is more resilient than PEX and easier to install on rough nipple surfaces. A greater number of thread to thread contact provides a better seal to lined nipples. Specially engineered brass adapter allows direct connection to PEX pipe.  Design-certified and manufactured in accordance with ANSI/ASME A112.18.6, ANSI /NSF-61 (Section 9), CSA B125, UL Laboratories MH25826 report, and NES NER-615 report. Full port design, used in joining 2 pipes together where a serviceable connection is desired. Acme threads on body and nut eliminate cross threading and prevent nut from creeping under pressure. Rugged Hi-Impact gray PVC Type II construction with EPDM o-ring. Meets ASTM schedule 80 socket standards. Complies with all applicable ASTM and ANSI standards. NSF Listed, IAPMO approved. Full port design, used in joining 2 pipes together where a serviceable connection is desired. Acme threads on body and nut eliminate cross threading and prevent nut from creeping under pressure. Rugged Hi-Impact gray PVC Type II construction with EPDM o-ring. Meets ASTM schedule 80 socket standards. Complies with all applicable ASTM and ANSI standards. NSF Listed, IAPMO approved.
Camco 2293 High Watt Density Water Heater Element Camco 2283 High Watt Density Water Heater Element Camco 2263 High Watt Density Water Heater Element
UL Listed, gasket included. UL Listed, gasket included. UL Listed, gasket included.
Camco 11360 Drain Pan With 1 in PVC Fitting Camco 4383 High Watt Density Water Heater Element Camco 4603 High Watt Density Water Heater Element
For electric water heaters only. Heavy duty polypropylene. Dual size 1 inch to 1.5 inch PVC drain fitting with gaskets included. Sides are 2.5 inches deep. Pre-cut side opening for drain fitting. High watt density elements, (150 plus watts per square inch). Gasket and detailed instructions included. 240 volts. UL listed. High watt density elements, (150 plus watts per square inch). Gasket and detailed instructions included. 240 volts. UL listed.
Camco 3943 High Watt Density Water Heater Element Camco 2223 High Watt Density Water Heater Element Camco 01023 Flapper Style Dielectric Heat Trap
UL Listed, gasket included. UL Listed, gasket included. Prevents heat escape through the inlet and outlet when flow stops. Color coded cold inlet and hot outlet. Meets AGA requirements. Self-cleaning fittings prevent corrosion. Dielectric insert thermoplastic lining. 3/4" MPT x 3/4" MPT x 3" length MIP.
Genova 30740 PVC Fitting Camco 11400 Drain Pan With 1 in PVC Fitting WaterFlex 0437024 Corrugated Flexible Water Heater Connector
Used to change direction in piping. Conforms to ASTM D2466. For electric water heaters only. Heavy duty polypropylene. Dual size 1 inch to 1.5 inch PVC drain fitting with gaskets included. Sides are 2.5 inches deep. Pre-cut side opening for drain fitting. Connector with nickel plated brass nuts and nitrile rubber sealing washer. Complies with no-lead laws. 3/4" FIP x 3/4" FIP.
CopperFlex WB00-15N Water Heater Connector Camco 4503 High Watt Density Water Heater Element Camco 10063 Water Heater Connector
Internal dielectric sleeve effectively separates dissimilar metals within the waterway to prevent galvanic and electrolytic corrosion. Nitrile rubber washer is more resilient than PEX and easier to install on rough nipple surfaces. A greater number of thread to thread contact provides a better seal to lined nipples. Specially engineered brass adapter allows direct connection to PEX pipe.  Design-certified and manufactured in accordance with ANSI/ASME A112.18.6, ANSI /NSF-61 (Section 9), CSA B125, UL Laboratories MH25826 report, and NES NER-615 report. High watt density elements, (150 plus watts per square inch). Gasket and detailed instructions included. 240 volts. UL listed. Seamless corrugated 18" flexible copper water connectors. 125 PSI maximum.
Camco 4483 High Watt Density Water Heater Element Camco 2583 Low Watt Density Water Heater Element Camco 2163 High Watt Density Water Heater Element
High watt density elements, (150 plus watts per square inch). Gasket and detailed instructions included. 240 volts. UL listed. UL & CSA listed, gasket included. UL Listed, gasket included.
Camco 4523 High Watt Density Water Heater Element CopperFlex WB00-18N Water Heater Connector Watts 100XL Temperature and Pressure Relief Valve
UL Listed, gasket included. Internal dielectric sleeve effectively separates dissimilar metals within the waterway to prevent galvanic and electrolytic corrosion. Nitrile rubber washer is more resilient than PEX and easier to install on rough nipple surfaces. A greater number of thread to thread contact provides a better seal to lined nipples. Specially engineered brass adapter allows direct connection to PEX pipe.  Design-certified and manufactured in accordance with ANSI/ASME A112.18.6, ANSI /NSF-61 (Section 9), CSA B125, UL Laboratories MH25826 report, and NES NER-615 report. Used in water heater and hot water storage tank applications to provide automatic temperature and pressure protection to hot water supply tanks and hot water heaters up to 105,000 BTU/hr. Features a bronze body with NPT male inlet and NPT female outlet connections, unique thermostat with special thermo-bonded coating, and a test lever. ASME rated and CSA listed. Temperature Relief: 210 degrees F (99 degrees C), Pressure Relief Range: 75 to 150psi (5.2 to 10.3 bar).
Watts LL100XL-150/210 Temperature/Pressure Relief Valve NDS U-2000-S PVC Union NDS U-2000-T PVC Fittings
Used in water heater and hot water storage tank applications to provide automatic temperature and pressure protection to hot water supply tanks and hot water heaters up to 105,000 BTU/hr. Features a bronze body with NPT male inlet and NPT female outlet connections, unique thermostat with special thermo-bonded coating, and a test lever. ASME rated and CSA listed. Temperature Relief: 210 degrees F (99 degrees C), Pressure Relief Range: 75 to 150psi (5.2 to 10.3 bar). Full port design, used in joining 2 pipes together where a serviceable connection is desired. Acme threads on body and nut eliminate cross threading and prevent nut from creeping under pressure. Rugged Hi-Impact gray PVC Type II construction with EPDM o-ring. Meets ASTM schedule 80 socket standards. Complies with all applicable ASTM and ANSI standards. NSF Listed, IAPMO approved. Full port design, used in joining 2 pipes together where a serviceable connection is desired. Acme threads on body and nut eliminate cross threading and prevent nut from creeping under pressure. Rugged Hi-Impact gray PVC Type II construction with EPDM o-ring. Meets ASTM schedule 80 socket standards. Complies with all applicable ASTM and ANSI standards. NSF Listed, IAPMO approved.
Watts 100XL Temperature and Pressure Relief Valve Camco 4703 Low Watt Density Water Heater Element Camco 2363 High Watt Density Water Heater Element
Used in water heater and hot water storage tank applications to provide automatic temperature and pressure protection to hot water supply tanks and hot water heaters up to 105,000 BTU/hr. Features a bronze body with NPT male inlet and NPT female outlet connections, unique thermostat with special thermo-bonded coating, and a test lever. ASME rated and CSA listed. Temperature Relief: 210 degrees F (99 degrees C), Pressure Relief Range: 75 to 150psi (5.2 to 10.3 bar). UL Listed, gasket included. UL Listed, gasket included.
Fluidmaster B1H12 Water Heater Connector Camco 9953 Professional Element Socket Camco 4803 High Watt Density Water Heater Element
Each foot of No-Burst contains 250 feet of stainless steel wire. Non toxic polymer core resists chlorine and chloramines. Tightly sealed cone washers. Easy to grip, exceptionally flexible nickel plated brass hex nuts. Exceeds all plumbing code requirements. Meets agency standards. IAPMO Standard, PS74-95, CSA, SBCCI, FDA, NSF-61, A112.18.6 and UPC. 10 year warranty. Fits standard 1/2" socket drive to replace screw-in water heater elements. High watt density elements, (150 plus watts per square inch). Gasket and detailed instructions included. 240 volts. UL listed.
Oatey 38707 Pipe Guards Oatey 38708 Pipe Guards Plumb Pak PP888-10LF Water Heater Connector
Made of polyethylene. Protects copper and plastic in concrete. For non code installations. Will not attack plastic pipe. Polyethylene Sleeving is 4 Mils thick. Fits 1/2", 3/4" and 1" pipes. Boxed. Made of polyethylene. Protects copper and plastic in concrete. For non code installations. Will not attack plastic pipe. Polyethylene Sleeving is 4 Mils thick. Fits 1/2", 3/4" and 1" pipes. Boxed. Plumb Pak Water Heater Connector, 3/4 in Nominal, FIP X MIP Connection, 12 in Length, Stainless Steel
CopperFlex WB00-24N Water Heater Connector Camco 23503 Dielectric Union Watts 100XL-8-150 Temperature and Pressure Relief Valve
Internal dielectric sleeve effectively separates dissimilar metals within the waterway to prevent galvanic and electrolytic corrosion. Nitrile rubber washer is more resilient than PEX and easier to install on rough nipple surfaces. A greater number of thread to thread contact provides a better seal to lined nipples. Specially engineered brass adapter allows direct connection to PEX pipe.  Design-certified and manufactured in accordance with ANSI/ASME A112.18.6, ANSI /NSF-61 (Section 9), CSA B125, UL Laboratories MH25826 report, and NES NER-615 report. Use wherever dissimilar metals occur in piping and plumbing systems. Use in water heaters that are pressure rated to 350 PSI, water storage tanks, gas piping, air conditioning, water conditioners, oil piping, water pumps, steam lines. Used in water heater and hot water storage tank applications to provide automatic temperature and pressure protection to hot water supply tanks and hot water heaters up to 105,000 BTU/hr. Features a bronze body with NPT male inlet and NPT female outlet connections, unique thermostat with special thermo-bonded coating, and a test lever. ASME rated and CSA listed. Temperature Relief: 210 degrees F (99 degrees C), Pressure Relief Range: 75 to 150psi (5.2 to 10.3 bar).
Fluidmaster B4H18 Water Heater Connector Fluidmaster B3H18 Water Heater Connector Fluidmaster B1H18 Water Heater Connector
Each foot of No-Burst contains 250 feet of stainless steel wire. Non toxic polymer core resists chlorine and chloramines. Tightly sealed cone washers. Easy to grip, exceptionally flexible nickel plated brass hex nuts. Exceeds all plumbing code requirements. Meets agency standards. IAPMO Standard, PS74-95, CSA, SBCCI, FDA, NSF-61, A112.18.6 and UPC. 10 year warranty. Each foot of No-Burst contains 250 feet of stainless steel wire. Non toxic polymer core resists chlorine and chloramines. Tightly sealed cone washers. Easy to grip, exceptionally flexible nickel plated brass hex nuts. Exceeds all plumbing code requirements. Meets agency standards. IAPMO Standard, PS74-95, CSA, SBCCI, FDA, NSF-61, A112.18.6 and UPC. 10 year warranty. Each foot of No-Burst contains 250 feet of stainless steel wire. Non toxic polymer core resists chlorine and chloramines. Tightly sealed cone washers. Easy to grip, exceptionally flexible nickel plated brass hex nuts. Exceeds all plumbing code requirements. Meets agency standards. IAPMO Standard, PS74-95, CSA, SBCCI, FDA, NSF-61, A112.18.6 and UPC. 10 year warranty.
Fluidmaster B2H18 Water Heater Connector Camco 4643 High Watt Density Water Heater Element Plumb Pak PP888-1LF Water Heater Connector
Each foot of No-Burst contains 250 feet of stainless steel wire. Non toxic polymer core resists chlorine and chloramines. Tightly sealed cone washers. Easy to grip, exceptionally flexible nickel plated brass hex nuts. Exceeds all plumbing code requirements. Meets agency standards. IAPMO Standard, PS74-95, CSA, SBCCI, FDA, NSF-61, A112.18.6 and UPC. 10 year warranty. High watt density elements, (150 plus watts per square inch). Gasket and detailed instructions included. 240 volts. UL listed. Plumb Pak Water Heater Connector, 3/4 in Nominal, FIP Connection, 12 in Length, Stainless Steel
Camco 20800 Drain Pan With 1 in PVC Fitting Genova 30640 PVC Fitting Cash Acme U3088FLEX12LF Braided Flexible Water Heater Connector
For gas or electric water heaters. Dual size 1 inch to 1.5 inch PVC drain fitting with gaskets included. Sides are 2.5 inches deep. Pre-cut side opening for drain fitting. Used to change direction in piping. Conforms to ASTM D2466. Used in residential and commercial applications to connect the hot and cold supply lines to the water heater. Connections are 3/4" FIP x 3/4" SharkBite. Connects to copper, PEX, and CPVC tubing.
Camco 08143 Replacement Single Element Water Heater Thermostat Fluidmaster B1H24 Water Heater Connector Camco 11572 Anode Rod
UL Listed. Meets original specifications length for Rheem, Ruud, Richmond, A.O.Smith, American and GSW. Energy efficient range setting, built-in safety switch to prevent overheating. Each foot of No-Burst contains 250 feet of stainless steel wire. Non toxic polymer core resists chlorine and chloramines. Tightly sealed cone washers. Easy to grip, exceptionally flexible nickel plated brass hex nuts. Exceeds all plumbing code requirements. Meets agency standards. IAPMO Standard, PS74-95, CSA, SBCCI, FDA, NSF-61, A112.18.6 and UPC. 10 year warranty. Preserve the life of the water heater by corroding themselves so the water heater doesn't. Easy to install. Replace the drain plug with the product to protect the tank. 5/8" outside diameter. 42" long.
Cash Acme U3088FLEX15LF Braided Flexible Water Heater Connector Camco 20840 Drain Pan With 1 in PVC Fitting Cash Acme U3088FLEX18LF Braided Flexible Water Heater Connector
Used in residential and commercial applications to connect the hot and cold supply lines to the water heater. Connections are 3/4" FIP x 3/4" SharkBite. Connects to copper, PEX, and CPVC tubing. For gas or electric water heaters. Dual size 1 inch to 1.5 inch PVC drain fitting with gaskets included. Sides are 2.5 inches deep. Pre-cut side opening for drain fitting. Used in residential and commercial applications to connect the hot and cold supply lines to the water heater. Connections are 3/4" FIP x 3/4" SharkBite. Connects to copper, PEX, and CPVC tubing.
Plumb Pak PP888-3LF Water Heater Connector Camco 7863 Dual Element Upper Water Heater Thermostat With HLC Camco 08163 Adjustable Water Heater Upper Thermostat
Plumb Pak Water Heater Connector, 3/4 in Nominal, FIP Connection, 18 in Length, Stainless Steel UL listed. Meets original specification length for State, Reliance, Kenmore, Bradford White. Energy efficient range setting, built-in safety switch to prevent overheating. UL Listed. Meets original specifications length for Rheem, Ruud, Richmond, A.O.Smith, American and GSW. Energy efficient range setting, built-in safety switch to prevent overheating.
Camco 7843 Single Element Water Heater Thermostat With HLC Camco 09423 Replacement Gasket Kit Camco 10493 Temperature and Pressure Relief Valves
UL listed. Meets original specification length for State, Reliance, Kenmore, Bradford White. Energy efficient range setting, built-in safety switch to prevent overheating. Fits Richmond, Rheem, Ruud, Vanguard and General Electric brand water heaters. Kits contain burner access door gasket, #20 Torx-head tool, four torx-head screws, and four J-style clip-on nuts. Setting: of 150 PSI / 210 Deg F., stainless steel spring, all brass body, ANS Z21.22 design, AGA certified, epoxy coated extension probe.
Watts 100XL-8-125 Temperature and Pressure Relief Valve Camco 20830 Drain Pan With 1 in PVC Fitting Rheem / Richmond RP20063 Water Heater Gasket Kit
Used in water heater and hot water storage tank applications to provide automatic temperature and pressure protection to hot water supply tanks and hot water heaters up to 105,000 BTU/hr. Features a bronze body with NPT male inlet and NPT female outlet connections, unique thermostat with special thermo-bonded coating, and a test lever. ASME rated and CSA listed. Temperature Relief: 210 degrees F (99 degrees C), Pressure Relief Range: 75 to 150psi (5.2 to 10.3 bar). For gas or electric water heaters. Dual size 1 inch to 1.5 inch PVC drain fitting with gaskets included. Sides are 2.5 inches deep. Pre-cut side opening for drain fitting. Contains everything that you need to replace the thermocouple and burner gasket on your Richmond FVIR gas water heater. The kit is required anytime the burner door is removed from the unit so that the gasket can be replaced. Kit ensures safe and reliable operation. Kit includes: Burner door gasket, tinnerman clips, screws, torx head driver and instructions. For use on Richmond, Rheem, Ruud and GE FVIR water heaters. Genuine OEM replacement part.
Camco 20810 Drain Pan With 1 in PVC Fitting Plumb Pak PP888-11LF Water Heater Connector WaterFlex 0437118 Corrugated Flexible Water Heater Connector
For gas or electric water heaters. Dual size 1 inch to 1.5 inch PVC drain fitting with gaskets included. Sides are 2.5 inches deep. Pre-cut side opening for drain fitting. Plumb Pak Water Heater Connector, 3/4 in Nominal, FIP X MIP Connection, 18 in Length, Stainless Steel Red and blue epoxy coated connectors with nickel plated brass nuts and nitrile rubber sealing washers. Complies with no-lead laws. 3/4" FIP x 3/4" FIP.
Rheem / Richmond RP20064 Thermocoupler-Gasket Kits Cash Acme 22441LF Sharkbite Plumb Pak PP888-4LF Water Heater Connector
Contains everything that you need to replace the thermocouple and burner gasket on your Richmond FVIR gas water heater. The kit is required anytime the burner door is removed from the unit so that the gasket can be replaced. Kit ensures safe and reliable operation. Kit includes: 24" thermocouple, burner door gasket, tinnerman clips, screws, torx head driver and instructions. For use on Richmond, Rheem, Ruud and GE FVIR water heaters. Genuine OEM replacement part. Features push-fit fittings that allow for instant push-fit connection for increased ease-of-use - no soldering required. Fittings are certified to 200 PSI and 200 degrees F. (93 degrees C.). Fits OD controlled copper, CPVC, or PEX pipe. Includes disconnecting clip that disassembles quickly in case of installation error. Contains an integral tube support liner that is effective in supporting PEX tubing to ensure secure, reliable connection. Compact, robust DZR brass body. No loose components, integrated design.  Design certified to IGC 188. Listed by IAPMO and are certified for potable and hydronic heating water distribution. Certified for underground applications and as a manufactured joint without access panels. Meets UPC, IPC, and cUPC requirements. Certified to ANSI/NSF-61 product standard for use in potable water systems. Includes FNPT Push-Fit Fitting and demount clip. Plumb Pak Water Heater Connector, 3/4 in Nominal, FIP Connection, 24 in Length, Stainless Steel
Cash Acme 22604LF Sharkbite Water Heater Installation Kit VALVE T/P 3/4IN 3-5/16LS150PSI Camco 2923 Ultra Low Watt Density Water Heater Element
Features push-fit fittings that allow for instant push-fit connection for increased ease-of-use - no soldering required. Fittings are certified to 200 PSI and 200 degrees F. (93 degrees C.). Fits OD controlled copper, CPVC, or PEX pipe. Includes disconnecting clip that disassembles quickly in case of installation error. Contains an integral tube support liner that is effective in supporting PEX tubing to ensure secure, reliable connection. Compact, robust DZR brass body. No loose components, integrated design.  Design certified to IGC 188. Listed by IAPMO and are certified for potable and hydronic heating water distribution. Certified for underground applications and as a manufactured joint without access panels. Meets UPC, IPC, and cUPC requirements. Certified to ANSI/NSF-61 product standard for use in potable water systems. Includes FNPT Push-Fit Fitting and demount clip. Temperature and pressure relief valve. Relieves pressure up to 150 psi/210F. 3/4 inlet/outlet, copper alloy body, 3-5/16" shank. UL & CSA listed. Gasket included. Best when water has high mineral content, withstands dry firing, heats in lime and sand buildup that would burn out ordinary elements, highest grade nickel and chromium incoloy,
Thermwell SP57/11C Insulation Blanket Camco 2853 Ultra Low Watt Density Water Heater Element M-D 04663 Water Heater Insulation Blanket
3" x 48" x 75" vinyl faced fiberglass water heater insulation blanket, R value 10.0, fits up to 60 gallon tank, plastic tape. For gas, oil or electric water heaters. UL Listed, gasket included. White vinyl backed fiberglass blanket. Designed for gas, oil or electric heaters. Fits up to 60 gallons. Includes adhesive tape for easy installation. Bagged.
Camco 2903 Ultra Low Watt Density Water Heater Element Cash Acme U3088FLEX24LF Braided Flexible Water Heater Connector Camco 10193 Water Heater Connector Kit
UL Listed, gasket included. Used in residential and commercial applications to connect the hot and cold supply lines to the water heater. Connections are 3/4" FIP x 3/4" SharkBite. Connects to copper, PEX, and CPVC tubing. Contains: (2) 3/4" x 2" dielectric nipples, (2) 3/4" x 15" flexible water connector, (1) roll teflon tape.
Plumb Pak PP888-12LF Water Heater Connector Quick R B5-69 Water Heater Insulation Jacket WaterFlex 0437124 Corrugated Flexible Water Heater Connector
Plumb Pak Water Heater Connector, 3/4 in Nominal, FIP X MIP Connection, 24 in Length, Stainless Steel Reduces heat loss from water tank. R value equals 6.7. Will insulate up to a 60 gallon tank. 2" x 48" x 75" blanket per bag. Red and blue epoxy coated connectors with nickel plated brass nuts and nitrile rubber sealing washers. Complies with no-lead laws. 3/4" FIP x 3/4" FIP.
Camco 4943 Ultra Low Watt Density Water Heater Element Camco 20860 Drain Pan With 1 in PVC Fitting Camco 2723 Low Watt Density Water Heater Element
Best when water has high mineral content. Withstands dry firing. Heats in lime and sand buildup that would burn out ordinary elements. Highest grade nickel and chromium incoloy alloy. Ultra low-watt density (50 watts per square inch). UL & CSA listed. For gas or electric water heaters. Dual size 1 inch to 1.5 inch PVC drain fitting with gaskets included. Sides are 2.5 inches deep. Pre-cut side opening for drain fitting. 4500W 240V screw in element LWD Lime Life Ripple Foldback (Does Not Fit A Duron tank, threads are 1").
Watts 374A Boiler Pressure Relief Valve DRAIN PAN W/H 32IN ID ALUMINUM Eastman 60022/DET-5 Thermal Expansion Tank
Used in hot water boiler applications to protect against excessive pressure on all type of hot water heating boiler equipment. Iron body construction with forged bronze inlet connections, non-metallic disc-to-metal seating, stainless steel spring and test lever. Standard pressure setting: 30 psi, pressure range: rated up to 550,000 BTU/hr at 30 psi (2 bar) setting only. Aluminum pan for gas or electric water heaters, 32" internal diameter, will not rust or crack, PVC fitting included. Used on gas, oil, or electric, direct-fired, residential water heater and hot water storage tank applications to absorb the increased volume of water created by thermal expansion. It also maintains balanced pressure throughout the water supply system by keeping system pressure below the T&P relief valve setting. It is a pre-pressurized, field-adjustable steel tank with an FDA-approved Butyl rubber diaphragm, and brass 3/4 in. (20mm) inlet connection. An expansion membrane prevents air-to-water contact in the tank ensuring a long system life. IAMPO listed and ANSI/NSF 61 certified. Maximum Pressure: 150psi (10 bar).
Plumer's Pack 07013 Thermodisc Contractor Pack Camco 10183 Water Heater Connector Kit Plumer's Pack 07023 Thermostat Contractor
Contains:  (2) High Watt Density Elements #02342  4500w 240v  (1) TOD lower thermostat #08122  (1) TOD upper thermostat #08162. Contains (2) 3/4" NPT  x 2" dielectric nipples, (2) 3/4" x 15" flexible water connector, (1) roll Teflon tape, (2 )3/4" NPT compression adapters, (1) 1/2" x 24" stainless steel gas connector. Contains:  (2) High Watt Density Elements #02342  4500w 240v  (1) Apcom style lower thermostat w/protector #07722  (1) Apcom style upper thermostat w/protector #07862.
Cash Acme U3068FLEX18BVLF Braided Flexible Water Heater Connector Camco 2953 Ultra Low Watt Density Water Heater Element DRAIN PAN TANKLESS W/PVC FITNG
Used in residential and commercial applications to connect the hot and cold supply lines to the water heater. Connects to copper, PEX, and CPVC tubing. 4500W 240V screw in element LWD Lime Life Ripple Foldback (Does Not Fit A Duron tank, threads are 1"). Includes 1" and 1-1/2" dual size PVC drain fitting. Injection molded for superior strength. Will not rust or corrode. Fits most tankless water heaters with a maximum depth of 13" and width of 20-1/2".Protect finished areas from water damage.
Cash Acme U3088FLEX18BVLF Braided Flexible Water Heater Connector Camco 11231 Water Heater Stand Kit DRAIN PAN TANKLESS ALUM W/PVC
Used in residential and commercial applications to connect the hot and cold supply lines to the water heater. Connects to copper, PEX, and CPVC tubing. Stand for gas water heaters from 30 to 50 gallons, constructed of galvanized steel, minimal assembly required, for use with all residential water heaters.  21" x 21" x 18" For gas or electric water heaters, aluminum will not rust, corrode, or crack. Fits most tankless water heaters with a maximum depth of 13" and width of 20-1/2". Protect finished areas from water damage.