Home > PLUMBING > ROUGH PLUMBING SUPPLIES > PIPE REPAIR > SADDLE TEES
Choose a sub category:
PIPE FITTINGS PIPE FITTINGS PIPE
PIPE PIPE INSULATION PIPE INSULATION
PIPE REPAIR PIPE REPAIR WATER HEATERS
WATER HEATERS WATER COOLERS WATER COOLERS
TUBING TUBING VALVES
VALVES GAS SUPPLY LINES GAS SUPPLY LINES
SOLVENTS & SEALERS SOLVENTS & SEALERS WASHER & DRYER
WASHER & DRYER PUMPS (NON-WELL) PUMPS (NON-WELL)
PUMPS (WELL) PUMPS (WELL) INDUSTRIAL HOSES
INDUSTRIAL HOSES PLUMBING TOOLS PLUMBING TOOLS
Sort By:
1
Genova 300 Dome Shaped Top Pipe Cap Genova 300 Dome Shaped Top Pipe Cap Genova 300 Dome Shaped Top Pipe Cap
Used to cap pipe. Conforms to ASTM D2466. Used to cap pipe. Conforms to ASTM D2466. Used to cap pipe. Conforms to ASTM D2466.
Genova 53056 CPVC Fitting Genova 300 Dome Shaped Top Pipe Cap Genova 300 Dome Shaped Top Pipe Cap
Used to change direction in piping and features lugs for fastening. Often used in conjunction with No.530671 washer hose valve for hooking up to automatic clothes washers and for fabricating water supply piping stub outs for toilet installation. Sometimes called a Drop Ear elbow. Used to cap threaded pipe. Adapts to standard male pipe threads. Teflon tape is recommended for threaded joints. Conforms to ASTM D2466. Used to cap pipe. Conforms to ASTM D2466.
Genova 300 Dome Shaped Top Pipe Cap Genova 50465/TCA-0500 CPVC Fitting Genova 300 Dome Shaped Top Pipe Cap
Used to cap pipe. Conforms to ASTM D2466. Used in conjunction with a brass compression fitting to transition to a CPVC fitting. Replaces the ferrule. Used to cap threaded pipe. Adapts to standard male pipe threads. Teflon tape is recommended for threaded joints. Conforms to ASTM D2466.
Genova Products 53055 CPVC Wing Elbow Genova 300 Dome Shaped Top Pipe Cap Genova 300 Dome Shaped Top Pipe Cap
Adapts from 1/2" CPVC to 1/2" male metal pipe thread and features lugs for fastening. Used on tub and shower faucets to adapt from 1/2" CPVC riser to shower arm. Sometimes called a Drop Ear elbow. Hand tighten only; seals by means of a special elastomeric gasket to ensure leakproof seal, use of joint compound or Teflon tape is neither necessary or recommended. Used to cap threaded pipe. Adapts to standard male pipe threads. Teflon tape is recommended for threaded joints. Conforms to ASTM D2466. Used to cap threaded pipe. Adapts to standard male pipe threads. Teflon tape is recommended for threaded joints. Conforms to ASTM D2466.
Genova 300 Dome Shaped Top Pipe Cap Genova 50467/TCA-0750 CPVC Fitting Genova 300 Dome Shaped Top Pipe Cap
Used to cap threaded pipe. Adapts to standard male pipe threads. Teflon tape is recommended for threaded joints. Conforms to ASTM D2466. Used in conjunction with a brass compression fitting to transition to a CPVC fitting. Replaces the ferrule. Used to cap pipe. Conforms to ASTM D2466.
Genova 50705CP CPVC Fittings Genova 53128 CPVC Fittings Genova 300 Dome Shaped Top Pipe Cap
SLIP X SLIP Used to change direction in piping. Solvent welds directly into 1/2'' CPVC fitting socket and adapts to female hose coupling. Used to cap threaded pipe. Adapts to standard male pipe threads. Teflon tape is recommended for threaded joints. Conforms to ASTM D2466.
Genova 50105CP CPVC Fitting Genova 50107CP CPVC Fittings Epc 50155 Tube Cap
Used to join straight lengths of CPVC tubing. Used to join straight lengths of CPVC tubing. Used to permanently or temporarily cap CPVC. Most often used in conjunction with short lengths of CPVC tubing to fabricate water hammer arrestors (air chambers) in the CPVC system. Bagged.
Genova 51405CP CPVC Fittings Genova 50707CP CPVC Fittings Genova 300 Dome Shaped Top Pipe Cap
Used to provide a branch supply line from a main line. SLIP X SLIP Used to change direction in piping. Used to cap pipe. Conforms to ASTM D2466.
Genova 52905 CPVC Fitting Genova 53010 Genogrip CPVC Fittings Genova Products 50175 CPVC Coupling
Used to change direction in piping from a fitting socket. Also used in conjunction with a conventional CPVC 90 degree elbow to fabricate a change of direction of piping at any angle. Solvent welds directly onto 1/2" CPVC tubing and adapts mechanically to 3/8" O.D. PEX tubing or copper tubing. Most often used to adapt from 1/2" CPVC tubing risers through floor to 3/8" O.D. closet or lavatory riser tubes. Can also be used with metal risers. Used to join straight lengths of CPVC tubing to smaller size tubing.
Genova 50405CP CPVC Fittings Genova 500 Pipe Reducing Bushing KBI TFS Pipe Transition Adapter
Used to adapt to female metal threaded fittings in cold water applications only! Use Teflon tape to seal pipe threads. Do not use other materials or compounds unless specifically approved by manufacturer. Used to reduce from fitting socket to CPVC tubing. Bagged. Unique molded CPVC/Stainless Steel design with internal "knurl" and EPDM O'ring insures reliability and integrity. Large Stainless steel hex for easy connection to IPS sized pipe and fittings. Meets/exceeds ASTM and ANSI standards. Pressure rated to 100 psi at 180 degrees F. Made with EverTUFF CPVC and Type 304 Stainless Steel.
Genova 53070 Genogrip CPVC  Red Street Adapter KBI TMS-0500 Pipe to Tube Adapter Genova 500 Solvent Weld Joints Pipe Union With Metal Bracket
Allows any fitting hub to be reduced to accept PEX, copper or CPVC tubing Unique molded CPVC/Stainless Steel design with internal "knurl" and EPDM O'ring insures reliability and integrity. Large Stainless steel hex for easy connection to IPS sized pipe and fittings. Meets/exceeds ASTM and ANSI standards. Pressure rated to 100 psi at 180 degrees F. Made with EverTUFF CPVC and Type 304 stainless steel. Solvent welds directly to CPVC tubing and provides a method for future disassembly of tubing without cutting.
Genova Products 50705 CPVC 90 Degree Elbow Genova Genogrip 500 Angle Tube Adapter Epc 500 Tube Cap
SLIP X SLIP Used to change direction in piping. Solvent welds directly onto 1/2" CPVC tubing and adapts mechanically to 3/8" OD Pex or copper tubing. Most often used to adapt from 1/2" CPVC tubing risers through the wall to 3/8" OD closet and/or lavatory riser tubes. Can also be used with metal risers. Used to permanently or temporarily cap CPVC. Most often used in conjunction with short lengths of CPVC tubing to fabricate water hammer arrestors (air chambers) in the CPVC system. Bagged.
KBI DE-0500-S Pipe Elbow KBI TFS Pipe Transition Adapter KBI TMS-0750 Pipe to Tube Adapter
90 degree elbow. CPVC/304 stainless steel technology with internal "knurl" and EDM. O'ring insuring reliability and integrity. Meets/exceeds all ASTM and ANSI standards. Made with Ever TUFF CPVC. Unique molded CPVC/Stainless Steel design with internal "knurl" and EPDM O'ring insures reliability and integrity. Large Stainless steel hex for easy connection to IPS sized pipe and fittings. Meets/exceeds ASTM and ANSI standards. Pressure rated to 100 psi at 180 degrees F. Made with EverTUFF CPVC and Type 304 Stainless Steel. Unique molded CPVC/Stainless Steel design with internal "knurl" and EPDM O'ring insures reliability and integrity. Large Stainless steel hex for easy connection to IPS sized pipe and fittings. Meets/exceeds ASTM and ANSI standards. Pressure rated to 100 psi at 180 degrees F. Made with EverTUFF CPVC and Type 304 stainless steel.
Genova Products 50407 CPVC Male Adapter Genova 50407CP CPVC Fittings Genova 500 Solvent Weld Joints Transition Union
Used to adapt to female metal threaded fittings in cold water applications only! Use Teflon tape to seal pipe threads. Do not use other materials or compounds unless specifically approved by manufacturer. Used to adapt to female metal threaded fittings in cold water applications only! Use Teflon tape to seal pipe threads. Do not use other materials or compounds unless specifically approved by manufacturer. Designed to compensate for the difference in coefficients of expansion which exist between CPVC and metal pipe in hot water applications. Solvent welds directly to CPVC tube and adapts to standard male pipe threads. Use Teflon tape to seal pipe threads, do not use other materials or compounds unless approved by manufacturer.
Genova Products 50105 CPVC Coupling Genova Products 50107 CPVC Coupling Genova 53085 Genogrip CPVC Fittings
Used to join straight lengths of CPVC tubing. Used to join straight lengths of CPVC tubing. These patented adapters solvent weld directly into standard fittings and adapt mechanically to both PEX tubing and copper tubing by utilizing a special metal gripper ring supplied with the fitting. These fittings can be used in conjunction with CPVC fittings to create an unlimited range of fittings to connect to any type of water supply tubing.
Genova 530751 Genogrip Genova 51407CP CPVC Fittings Genova 500 Solvent Weld Joints Pipe Union
These patented adapters solvent weld directly into standard fittings and adapt mechanically to both PEX tubing and copper tubing by utilizing a special metal gripper ring supplied with the fitting. These fittings can be used in conjunction with CPVC fittings to create an unlimited range of fittings to connect to any type of water supply tubing. Used to provide a branch supply line from a main line. Solvent welds directly to CPVC tubing and provides a method for future disassembly of tubing without cutting.
Genova 500 Solvent Weld Joints Transition Union Genova Products 50405 CPVC Male Adapter Genova 500 Transition Union
Designed to compensate for the difference in coefficients of expansion which exist between CPVC and metal pipe in hot water applications. Solvent welds directly to CPVC tube and adapts to standard female pipe threads. Use Teflon tape to see pipe threads, do not use other materials or compounds unless approved by the manufacturer. Used to adapt to female metal threaded fittings in cold water applications only! Use Teflon tape to seal pipe threads. Do not use other materials or compounds unless specifically approved by manufacturer. Designed to compensate for the difference in coefficients of expansion which exist between CPVC and metal pipe in hot water applications. Solvent welds directly to CPVC tube and adapts to standard male pipe threads. Use Teflon tape to seal pipe threads, do not use other materials or compounds unless approved by manufacturer.
Genova 52907 CPVC Fitting Genova Products 51405 CPVC Tee Genova 500 Solvent Weld Joints Transition Union
Used to change direction in piping from a fitting socket. Also used in conjunction with a conventional CPVC 90 degree elbow to fabricate a change of direction of piping at any angle. Used to provide a branch supply line from a main line. Used to transition from copper or brass tube to CPVC. Permits easy disassembly of piping system. Remove CPVC component and gasket before making sweat connection.
Genova 300 Dome Shaped Top Pipe Cap Genova Products 50605 CPVC 45 Degree Elbow KBI TPC-0500 Pipe to Tube Adapter
Used to cap pipe. Conforms to ASTM D2466. Used to change direction in piping. Sometimes used in conjunction with a 12"L CPVC tubing on long runs to absorb expansion. Bagged. Molded CPVC/stainless steel design with internal "knurl" and EPDM O-ring insures reliability and integrity. Meets/exceeds ASTM and ANSI standards. Made with EverTUFF CPVC and Type 304 stainless steel. Pressure rated to 100 PSI at 180 degrees F.
Genova 500 Solvent Weld Joints Transition Union KBI TPC-0750 Pipe to Tube Adapter Genova 500 Transition Union
Designed to compensate for the difference in coefficients of expansion which exist between CPVC and metal pipe in hot water applications. Solvent welds directly to CPVC tube and adapts to standard female pipe threads. Use Teflon tape to see pipe threads, do not use other materials or compounds unless approved by the manufacturer. Molded CPVC/stainless steel design with internal "knurl" and EPDM O-ring insures reliability and integrity. Meets/exceeds ASTM and ANSI standards. Made with EverTUFF CPVC and Type 304 stainless steel. Pressure rated to 100 PSI at 180 degrees F. Used to transition from copper or brass tube to CPVC. Permits easy disassembly of piping system. Remove CPVC component and gasket before making sweat connection.
Genova 500 Transition Union Genova 500 Transition Union Genova 500 Solvent Weld Joints Transition Union
Used to transition from metal male pipe threads to CPVC. Permits easy disassembly of piping system. Used to transition from metal female pipe threads to CPVC. Permits easy disassembly of piping. Used to transition from metal female pipe threads to CPVC. Permits easy disassembly of piping.
Genova 61231 Dwv Saddle Tee Genova Products 50475 CPVC Fittings Genova 500 Solvent Weld Joints Transition Union
Solvent welds directly onto the side of a 3" pipe to provide a simple way of connecting a branch into a drain pipe. The inlet is constructed to accept a 2" fitting over its outside diameter or an 1-1/2" pipe into its inside diameter. CAN BE GLUED WITH PVC CEMENT. Used to adapt to metal FIP threaded fittings to smaller pipe size in cold water applications only! Teflon thread tape is recommended for threaded joints. Boxed. Transition from copper or brass tube to CPVC. Permits easy disassembly of piping systems. Uses replaceable brass ferrule. Not for use with PEX tubing.
Epc 50158 Tube Cap Oatey 43789 Dwv Saddle Tee Kit Plumb Pak PP32-10BRLF CPVC Transition Fittings
Used to permanently or temporarily cap CPVC. Most often used in conjunction with short lengths of CPVC tubing to fabricate water hammer arrestors (air chambers) in the CPVC system. Bagged. Complete with tee and U-bolts, nuts and washers. Available in two sizes which provide capability of tapping 1-1/2" or 2" DWV pipe to 3" or 4" existing schedule 40 DWV pipe.  3" x 2" and 4" x 2" spigots accept 1-1/2" schedule 40 DWV inside socket, joins to 2" with 2" couplings. Allows tapping of existing DWV lines without cutting pipe. Fits inside 2" DWV with couplings. Connects CPVC pipe/tubing to threaded pipe. Drilled through, no tube stop.
Genova Products 50707 CPVC 90 Degree Elbow Genova Products 53071Z CPVC Dropear Elbow Genova 50607 CPVC Fittings
SLIP X SLIP Used to change direction in piping. Used to transition from metal male pipe threads to CPVC. Provides for rigid installation by mounting elbow to wall. Usually used for shower arm or washer hose valve installation. Used to change direction in piping. Sometimes used in conjunction with a 12"L CPVC tubing on long runs to absorb expansion. Bagged.
Oatey 43791 Dwv Saddle Tee Kit Plumb Pak PP855-30LF Saddle Tee Genova 500 Pipe Reducing Bushing
Complete with tee and U-bolts, nuts and washers. Available in two sizes which provide capability of tapping 1-1/2" or 2" DWV pipe to 3" or 4" existing schedule 40 DWV pipe.  3" x 2" and 4" x 2" spigots accept 1-1/2" schedule 40 DWV inside socket, joins to 2" with 2" couplings. Allows tapping of existing DWV lines without cutting pipe. Fits inside 2" DWV with couplings. 1/2" F.I.P. outlet for 1/2" I.P.  or 3/4" O.D. Used to reduce from fitting socket to CPVC tubing. Bagged.
Genova 500 Transition Union Genova 500 Solvent Weld Joints Transition Union Oatey 43795 Dwv Saddle Tee Kit
Used to transition from metal female pipe threads to CPVC. Permits easy disassembly of piping. Used to transition from metal male pipe threads to CPVC. Permits easy disassembly of piping system. Complete with tee and U-bolts, nuts and washers. Available in two sizes which provide capability of tapping 1-1/2" or 2" DWV pipe to 3" or 4" existing schedule 40 DWV pipe.  3" x 2" and 4" x 2" spigots accept 1-1/2" schedule 40 DWV inside socket, joins to 2" with 2" couplings. Allows tapping of existing DWV lines without cutting pipe. Fits inside 2" DWV with couplings.
Genova 52705 CPVC Fittings Oatey 43793 Dwv Saddle Tee Kit Genova Products 51471 CPVC Tee
Used on close offsets where very short pieces of CPVC pipe would otherwise have to be used with conventional 45 degree elbows. A principal use is to offset piping over and around existing piping mounted on flat surfaces such as a wall or ceiling. Complete with tee and U-bolts, nuts and washers. Available in two sizes which provide capability of tapping 1-1/2" or 2" DWV pipe to 3" or 4" existing schedule 40 DWV pipe.  3" x 2" and 4" x 2" spigots accept 1-1/2" schedule 40 DWV inside socket, joins to 2" with 2" couplings. Allows tapping of existing DWV lines without cutting pipe. Fits inside 2" DWV with couplings. Used to provide a branch supply line from a main line. Reduces to smaller pipe size.
Genova 51473 CPVC Fittings Genova 50610 CPVC Fitting Genova 50710 CPVC Fittings
Used to provide a branch supply line from a main line. Reduces to smaller pipe size. Used to change direction in piping. Sometimes used in conjunction with a 12"L CPVC tubing on long runs to absorb expansion. Bagged. SLIP X SLIP Used to change direction in piping.
Genova 50110 CPVC Fitting Genova Products 50307 CPVC Female Adapter Genova Products 51407 CPVC Tee
Used to join straight lengths of CPVC tubing. Used to adapt metal MIP threaded fittings to CPVC. Hand tighten only; seals by means of a special elastometric gasket at base of threads to ensure a leakproof seal; use of joint compound or Teflon tape is neither necessary nor recommended. Bagged. Used to provide a branch supply line from a main line.
Genova 52707 CPVC Fittings Genova 500 Solvent Weld Joints Transition Union Genova 50410 CPVC Fittings
Used on close offsets where very short pieces of CPVC pipe would otherwise have to be used with conventional 45 degree elbows. A principal use is to offset piping over and around existing piping mounted on flat surfaces such as a wall or ceiling. Transition from copper or brass tube to CPVC. Permits easy disassembly of piping systems. Uses replaceable brass ferrule. Not for use with PEX tubing. Used to adapt to female metal threaded fittings in cold water applications only! Use Teflon tape to seal pipe threads. Do not use other materials or compounds unless specifically approved by manufacturer.
Genova Products 50305 CPVC Female Adapter Genova 50310 CPVC Fittings Genova 51477 CPVC Fittings
Used to adapt metal MIP threaded fittings to CPVC. Hand tighten only; seals by means of a special elastometric gasket at base of threads to ensure a leakproof seal; use of joint compound or Teflon tape is neither necessary nor recommended. Bagged. Used to adapt metal MIP threaded fittings to CPVC. Hand tighten only; seals by means of a special elastometric gasket at base of threads to ensure a leakproof seal; use of joint compound or Teflon tape is neither necessary nor recommended. Bagged. Used to provide a branch supply line from a main line. Reduces to smaller pipe size.
Genova 51410 CPVC Fitting Genova 51577 Pipe to Tube Coupling Ariston GL Glass Lined Electric Water Heater
Used to provide a branch supply line from a main line. Used in cold water applications only to adapt from CPVC pipe to PVC pipe. Saves space, energy and water with compact longer-lasting design and by providing instant hot water at the tap. Quick, economical recovery and insulation for high efficiency. Lightweight, compact, plugs into standard 110-Volt outlet and mounts on wall or sits on floor. Easily install by tapping cold water line under sink, or for greater volume install inline with larger hot water source such as tankless water heaters or storage tank heaters. Backlit On/Off switch. ABS housing, injected foam insulation. Magnesium anode rod helps protect tank against corrosion. UL Listed. 6 YEAR LIMITED WARRANTY. 1/2" NPT male inlet/outlet connections and 3/4"NPT temperature/pressure relief valve installed. 14"H x 14"W, 10-1/4"D 2.5-gallon effective for 1 sink, 12-1/4"D 4-gallon for 2 sinks. Includes mounting bracket. 65 to 145 degrees Fahrenheit adjustable operating temperatures. 110/120 Volts, 12.5 amps, 1440 watts, single phase, 150 psi operating pressure.
Ariston GL Glass Lined Electric Water Heater Ecosmart POU 3.5 Water Heaters Ecosmart ECO 8 Water Heaters
Saves space, energy and water with compact longer-lasting design and by providing instant hot water at the tap. Quick, economical recovery and insulation for high efficiency. Lightweight, compact, plugs into standard 110-Volt outlet and mounts on wall or sits on floor. Easily install by tapping cold water line under sink, or for greater volume install inline with larger hot water source such as tankless water heaters or storage tank heaters. Backlit On/Off switch. ABS housing, injected foam insulation. Magnesium anode rod helps protect tank against corrosion. UL Listed. 6 YEAR LIMITED WARRANTY. 1/2" NPT male inlet/outlet connections and 3/4"NPT temperature/pressure relief valve installed. 14"H x 14"W, 10-1/4"D 2.5-gallon effective for 1 sink, 12-1/4"D 4-gallon for 2 sinks. Includes mounting bracket. 65 to 145 degrees Fahrenheit adjustable operating temperatures. 110/120 Volts, 12.5 amps, 1440 watts, single phase, 150 psi operating pressure. Designed for under the sink point-of-use applications with a maximum flow rate of .5 gpm.  Amperage draw: 29, required breaker: 30, required wire: 10 AWG, connection fitting: 1/2" MPT. Dimensions: 7" x 11" x 3". For single faucet application. Configured for climates where incoming water temperature is 67 degrees F and above. Well suited for heating up to 2 gpm. Digital temperature control allows you to set temperature in 1 degree increments. Voltage: 240, single phase, 8KW, 33 amps, required breaker: 40DP, required wire 8 AWG, 1/2" NPT pipe fitting. Dimensions: 12" x 9.75" x 3.75".
Ecosmart ECO 11 Water Heaters Richmond 6EP2-1 Electric Water Heater Richmond 6EP6-1 Electric Water Heater
Configured for climates where incoming water temperature is 67 degrees F and above. Well suited for heating up to 2 gpm. Digital temperature control allows you to set temperature in 1 degree increments. Voltage: 240, single phase, 13.6KW, 57 amps, required breaker: 60DP, required wire 2X6 AWG, 1/2" CF pipe fitting. Dimensions: 12" x 9.75" x 3.75". 6-Year limited warranty on tank and parts. Unique side mounted water connections for easier installation, space saving design for installation in tight spaces, UL approved for use in manufactured housing, ideal for retro-fit replacement of electric water heater, single 2000 watt heating element, rigid foam insulation for superior heat retention, factory installed temperature and pressure relief valve, includes extra durable high temperature dip tube to meet the most stringent plumbing codes. Meets or exceeds National Appliance Conservation Act (NAECA) requirements. 6-Year limited warranty on tank and parts. Unique side mounted water connections for easier installation, space saving design for installation in tight spaces, UL approved for use in manufactured housing, ideal for retro-fit replacement of electric water heater, single 2000 watt heating element, rigid foam insulation for superior heat retention, factory installed temperature and pressure relief valve, includes extra durable high temperature dip tube to meet the most stringent plumbing codes. Meets or exceeds National Appliance Conservation Act (NAECA) requirements.
Richmond 6EP10-1 Electric Water Heater Richmond 6EP20-1 Electric Water Heater WATER HEATER ELEC MED 40GAL
6-Year limited warranty on tank and parts. Unique side mounted water connections for easier installation, space saving design for installation in tight spaces, UL approved for use in manufactured housing, ideal for retro-fit replacement of electric water heater, single 2000 watt heating element, rigid foam insulation for superior heat retention, factory installed temperature and pressure relief valve, includes extra durable high temperature dip tube to meet the most stringent plumbing codes. Meets or exceeds National Appliance Conservation Act (NAECA) requirements. 6-Year limited warranty on tank and parts. Unique side mounted water connections for easier installation, space saving design for installation in tight spaces, UL approved for use in manufactured housing, ideal for retro-fit replacement of electric water heater, single 2000 watt heating element, rigid foam insulation for superior heat retention, factory installed temperature and pressure relief valve, includes extra durable high temperature dip tube to meet the most stringent plumbing codes. Meets or exceeds National Appliance Conservation Act (NAECA) requirements. 0.95 Energy factor. Features a mechanical thermostat that automatically keeps water at your desired temperature and meets or exceeds NAECA and UL requirements.
WATER HEATER ELEC TALL 40GAL  WATER HEATER ELEC MED 30GAL   WATER HEATER ELEC SHORT 28GAL
0.95 Energy factor. Features a mechanical thermostat that automatically keeps water at your desired temperature and meets or exceeds NAECA and UL requirements. 0.95 Energy factor. Features a mechanical thermostat that automatically keeps water at your desired temperature and meets or exceeds NAECA and UL requirements. 0.95 Energy factor. Features a mechanical thermostat that automatically keeps water at your desired temperature and meets or exceeds NAECA and UL requirements.
WATER HEATER ELEC TALL 50GAL  WATER HEATER ELEC MED 50GAL   WATER HEATER ELEC SHORT 36GAL
0.95 Energy factor. Features a mechanical thermostat that automatically keeps water at your desired temperature and meets or exceeds NAECA and UL requirements. 0.95 Energy factor. Features a mechanical thermostat that automatically keeps water at your desired temperature and meets or exceeds NAECA and UL requirements. 0.95 Energy factor. Features a mechanical thermostat that automatically keeps water at your desired temperature and meets or exceeds NAECA and UL requirements.
WATER HEATER ELEC TALL 30GAL  Richmond 6EP15-1 Electric Water Heater WATER HEATER M-HOME ELEC 30GAL
0.95 Energy factor. Features a mechanical thermostat that automatically keeps water at your desired temperature and meets or exceeds NAECA and UL requirements. 6-Year limited warranty on tank and parts. Unique side mounted water connections for easier installation, space saving design for installation in tight spaces, UL approved for use in manufactured housing, ideal for retro-fit replacement of electric water heater, single 2000 watt heating element, rigid foam insulation for superior heat retention, factory installed temperature and pressure relief valve, includes extra durable high temperature dip tube to meet the most stringent plumbing codes. Meets or exceeds National Appliance Conservation Act (NAECA) requirements. 0.95 Energy Factor. Heater features unique side mounted water connections for easier installation and the dual 4,500-watt heating elements provide fast recovery.  Made to meet or exceed NAECA requirements, this efficient heater has an automatic thermostat that makes it easy for you to control precisely the temperature of the water.  Meets or exceed NAECA and UL requirements.
Ecosmart ECO 18 Water Heaters WATER HEATER M-HOME ELEC 40GAL WATER HEATER ELEC MED 40GALLON
Configured for climates where incoming water temperature is 62 degrees F and above. Capable of heating over 2.5 gpm. Digital temperature control allows temperature settings in 1 degree increments. Voltage: 240, single phase, 18 kW, amperage draw: 75 amps, required breaker: 2 x 40 DP, required wire: 2x8 AWG, Pipe fittings: 3/4" NPT, Dimensions 18" x 14" x 3.75". 0.95 Energy Factor. Heater features unique side mounted water connections for easier installation and the dual 4,500-watt heating elements provide fast recovery.  Made to meet or exceed NAECA requirements, this efficient heater has an automatic thermostat that makes it easy for you to control precisely the temperature of the water.  Meets or exceed NAECA and UL requirements. .095 Energy Factor. Meets or exceeds NAECA and UL requirements. Medium profile allow this water heater to fit into spaces a taller model won't while increasing ease of installation.
WATER HEATER ELEC MED 50GALLON Ecosmart ECO 27 Water Heaters WATER HEAT 30GAL POU ELEC 240V
.095 Energy Factor. Meets or exceeds NAECA and UL requirements. Medium profile allow this water heater to fit into spaces a taller model won't while increasing ease of installation. Configured for climates where incoming water temperature can reach as low as 37 degrees. Capable of heating nearly 3 gpm. Digital temperature control allows temperature settings in 1 degree increments. Voltage:240, single phase, 24KW, amperage draw: 100 amps, required breaker: 3x40 DP, required wire: 3x8 SWG, Pipe fittings: 3/4"NPT, dimensions: 18" x 17" x 3.75". 0.95 Energy Factor. Point-of-Use water heater has a compact design that can provide an adequate supply of hot water for a single application. The water heater includes a factory installed temperature and pressure relief valve. The heater can be mounted on a wall for convenient installation.
WATER HEAT 30GAL POU ELEC 120V WATER HEATER ELEC SHORT 47GAL Richmond 8TV40-2 Double Element Table Top Electric Water Heater
0.95 Energy Factor. Point-of-Use water heater has a compact design that can provide an adequate supply of hot water for a single application. The water heater includes a factory installed temperature and pressure relief valve. The heater can be mounted on a wall for convenient installation. 0.95 Energy factor. Features a mechanical thermostat that automatically keeps water at your desired temperature and meets or exceeds NAECA and UL requirements. 6-year limited warranty on tank and parts. Dual 4500 watt heating elements for faster recovery, patented resistor design heating elements prolong anode rod and tank life, porcelain enamel top is durable and provides added work area in kitchen installations, compact design permits water heater to fit snugly against wall, factory installed temperature and pressure relief valve, includes extra durable high temperature dip tube to meet the most stringent plumbing codes. Meets or exceeds National Appliance Conservation Act (NAECA) requirements. Dia:25",Ht:36" WtrCnHt:33"
Richmond MR50245 Round and Tall Electric Water Heater Rheem / Richmond RMTGH-95DVLN Water Heater Rheem / Richmond RMTGH-95DVLP Water Heater
Lifetime limited tank warranty, 6-year limited parts warranty. Seamless, blow-molded, polybutene tank ? impervious to rust and corrosion, multiple layers of filament wound fiberglass give the tank unmatched strength, polyurethane insulation helps reduce energy consumption. Pipe wrap energy saving kit included to achieve maximum energy savings, recessed drain valve is out of the way of brooms and scrubbers, tough molded polyethylene outer shell resists dents and scratches, bowl shaped bottom allows complete sediment draining, high temperature polysulfone dip tubes, thermally fused upper element provides protection against "dry-firing", titanium lower element for superior resistance to lime build-up, factory installed conduit between element control boxes, all plastic tank eliminates the need for an anode rod, factory installed temperature and pressure relief valve, factory installed vacuum relief valve. For 3 bathroom homes. 11,000-199,9002 BTU max, 9.5 gal/min at 35 deg rise. 94 percent efficient with stainless steel condensing heat exchanger. Digital (UMC-117) remote control and 20 ft of thermostat wire included. 27-4/2"h x 18-1/2" W x 9-3/4" D. For 3 bathroom homes. 11,000-199,9002 BTU max, 9.5 gal/min at 35 deg rise. 94 percent efficient with stainless steel condensing heat exchanger. Digital (UMC-117) remote control and 20 ft of thermostat wire included. 27-4/2"h x 18-1/2" W x 9-3/4" D.
Rheem / Richmond RMTGH-95XLN Water Heater Rheem / Richmond RMTGH-95XLP Water Heater HEAT PUMP 50GAL 10YR HYBRID
For 3 bathroom homes. 11,000-199,9002 BTU max, 9.5 gal/min at 35 deg rise. 94 percent efficient with stainless steel condensing heat exchanger. Digital (UMC-117) remote control and 20 ft of thermostat wire included. 27-4/2"h x 18-1/2" W x 9-3/4" D. For 3 bathroom homes. 11,000-199,9002 BTU max, 9.5 gal/min at 35 deg rise. 94 percent efficient with stainless steel condensing heat exchanger. Digital (UMC-117) remote control and 20 ft of thermostat wire included. 27-4/2"h x 18-1/2" W x 9-3/4" D. Multiple operation modes: energy saver, heat pump only, high demand, electricd heat only, vacation. Premium grade anode rod with resistor extends the life of the tank. 3/4" hot water inlet and outlet, 3/8" condensate drain connections. Incoloy stainless steel resistor elements, top-mount washable air filter, 2-1/2" non-CFC foam insulation, enhanced flow brass drain valve, Temperature an pressure relief valve included.
HEAT PUMP 80GAL 10YR HYBRID
Multiple operation modes: energy saver, heat pump only, high demand, electricd heat only, vacation. Premium grade anode rod with resistor extends the life of the tank. 3/4" hot water inlet and outlet, 3/8" condensate drain connections. Incoloy stainless steel resistor elements, top-mount washable air filter, 2-1/2" non-CFC foam insulation, enhanced flow brass drain valve, Temperature an pressure relief valve included.
   
 
1