Home > PLUMBING > ROUGH PLUMBING SUPPLIES > PIPE REPAIR > PIPE REPAIR COUPLINGS
Choose a sub category:
PIPE FITTINGS PVC COMPRESSION COUPLINGS CPVC COMPRESSION COUPLINGS
PIPE BRASS COMPRESSION COUPLINGS PIPE INSULATION
GALV COMPRESSION COUPLINGS PIPE REPAIR WATER HEATERS
WATER COOLERS TUBING VALVES
GAS SUPPLY LINES SOLVENTS & SEALERS WASHER & DRYER
PUMPS (NON-WELL) PUMPS (WELL) INDUSTRIAL HOSES
PLUMBING TOOLS
Sort By:
1
Genova E30107 Solvent Weld Extended Pipe Coupling Oatey 39100/33460 Test Caps Oatey 39101/33461 Test Caps
Used to join lengths of pipe. Conforms to ASTM D2466. Inexpensive, disposable test caps for pressure testing ABS or PVC with up to 10 pounds pressure. Cap is solvent welded inside open pipe end. After test the center is knocked out and thrown away. Made of ABS. Inexpensive, disposable test caps for pressure testing ABS or PVC with up to 10 pounds pressure. Cap is solvent welded inside open pipe end. After test the center is knocked out and thrown away. Made of ABS.
Genova E30105 Solvent Weld Extended Pipe Coupling Oatey 39102/33462 Test Caps Oatey 39103/33463 Test Caps
Used to join lengths of pipe. Conforms to ASTM D2466. Inexpensive, disposable test caps for pressure testing ABS or PVC with up to 10 pounds pressure. Cap is solvent welded inside open pipe end. After test the center is knocked out and thrown away. Made of ABS. Inexpensive, disposable test caps for pressure testing ABS or PVC with up to 10 pounds pressure. Cap is solvent welded inside open pipe end. After test the center is knocked out and thrown away. Made of ABS.
Genova E30110 Solvent Weld Extended Pipe Coupling Elkhart 32414 2-Hole Tube Strap Genova 300 Solvent Weld Pipe Coupling
Used to join lengths of pipe. Conforms to ASTM D2466. Contractor Pack - Bagged Used for joining sections of threaded pipe and nipples. Teflon thread tape is recommended for threaded joints. Conforms to ASTM D2466.
B and K Industries P01-050HC Baby J-Hook B and K Industries P01-075HC Baby J-Hook Genova 300 Solvent Weld Pipe Reducing Coupling
ABS plastic J-hook to be used for hanging pipe from joists, rafters, or studs.  Includes nails for secure fit. ABS plastic J-hook to be used for hanging pipe from joists, rafters, or studs.  Includes nails for secure fit. Used to reduce or increase pipe size. Conforms to ASTM D2466.
Genova 53056 CPVC Fitting Genova 300 Solvent Weld Extended Pipe Coupling B&K G13-100HC 2-Hole Pipe Strap
Used to change direction in piping and features lugs for fastening. Often used in conjunction with No.530671 washer hose valve for hooking up to automatic clothes washers and for fabricating water supply piping stub outs for toilet installation. Sometimes called a Drop Ear elbow. Used to join lengths of pipe. Conforms to ASTM D2466. Galvanized steel two-hole strap to secure pipe.  Two holes for use with nails or screws to ensure stable fit.
Genova 300 Solvent Weld Extended Pipe Coupling Genova 300 Solvent Weld Pipe Reducing Coupling B and K P28-050HC Pipe Clamps
Used to join lengths of pipe. Conforms to ASTM D2466. Used to reduce or increase pipe size. Conforms to ASTM D2466. Durable polypropylene standard clamp.  Split, ribbed design to allow for expansion and contraction after installation.  Flanged with holes for secure installation.
B and K Industries P01-100HC Baby J-Hook Genova 50465/TCA-0500 CPVC Fitting B&K G13-038HC 2-Hole Pipe Strap
ABS plastic J-hook to be used for hanging pipe from joists, rafters, or studs.  Includes nails for secure fit. Used in conjunction with a brass compression fitting to transition to a CPVC fitting. Replaces the ferrule. Galvanized steel two-hole strap to secure pipe.  Two holes for use with nails or screws to ensure stable fit.
B&K C13-100HC 2-Hole Pipe Strap B and K P28-075HC Pipe Clamps B and K Industries G65-050HC Clevis Hanger
Copper plated two-hole strap to secure pipe.  Corrosion resistant, for indoor & outdoor use. Durable polypropylene standard clamp.  Split, ribbed design to allow for expansion and contraction after installation.  Flanged with holes for secure installation. Galvanized steel for IPS pipe.  For use with all thread rod up to 3/8".  Works as a suspension style hanger.
B&K G13-125HC 2-Hole Pipe Strap B&K C13-125HC 2-Hole Pipe Strap Genova 300 Solvent Weld Pipe Coupling
Galvanized steel two-hole strap to secure pipe.  Two holes for use with nails or screws to ensure stable fit. Copper plated two-hole strap to secure pipe.  Corrosion resistant, for indoor & outdoor use. Used for joining sections of threaded pipe and nipples. Teflon thread tape is recommended for threaded joints. Conforms to ASTM D2466.
B&K G13-050HC 2-Hole Pipe Strap Genova Products 53055 CPVC Wing Elbow B&K C15-125HC Nail
Galvanized steel two-hole strap to secure pipe.  Two holes for use with nails or screws to ensure stable fit. Adapts from 1/2" CPVC to 1/2" male metal pipe thread and features lugs for fastening. Used on tub and shower faucets to adapt from 1/2" CPVC riser to shower arm. Sometimes called a Drop Ear elbow. Hand tighten only; seals by means of a special elastomeric gasket to ensure leakproof seal, use of joint compound or Teflon tape is neither necessary or recommended. B&K Nail, 1-1/4 in, Copper, Plated Steel
Genova 300 Solvent Weld Extended Pipe Coupling B&K C13-150HC 2-Hole Pipe Strap B&K P20-100HC Perforated Hanger Tape
Used to join lengths of pipe. Conforms to ASTM D2466. Copper plated two-hole strap to secure pipe.  Corrosion resistant, for indoor & outdoor use. Plastic strapping with perforated holes to be used for securing any size pipe.  Allows custom straps to be fabricated.  Easy to cut and lightweight.
Genova 300 Solvent Weld Pipe Coupling B and K Industries P25-050HC Pipe Clamp B&K G20-124HC Pipe Strap
Used for joining sections of threaded pipe and nipples. Teflon thread tape is recommended for threaded joints. Conforms to ASTM D2466. Durable polypropylene full clamp provides an easy and efficient way to secure pipes.  Clamp grips, insulates, and isolates the pipe from the mounting surface.  Preloaded barbed nails allow pipe to secured in any direction. Galvanized steel 24 gauge strapping with perforated holes to be used for securing any size pipe.  Allows custom straps to be fabricated.
B&K C13-050HC 2-Hole Pipe Strap B and K P25-075HC Pipe Clamps Elkhart 32428 2-Hole Tube Strap
Copper plated two-hole strap to secure pipe.  Corrosion resistant, for indoor & outdoor use. Durable polypropylene full clamp provides an easy and efficient way to secure pipes.  Clamp grips, insulates, and isolates the pipe from the mounting surface.  Preloaded barbed nails allow pipe to secured in any direction. Contractor Pack - Bagged
B&K G80-038HC Plate Connector 3/8 in B and K Industries P24-050HC Pipe Clamps B&K G20-128HC Pipe Strap
Galvanized malleable iron top plate connector used to connect split ring hangers with a 3/8" all thread rod. Durable polypropylene half clamp provides an easy and efficient way to secure pipes.  Clamp snaps around pipe and preloaded barbed nails allow pipe to secured in any direction. Galvanized steel 28 gauge strapping with perforated holes to be used for securing any size pipe.  Allows custom straps to be fabricated. Lightweight steel.
B&K C13-075HC 2-Hole Pipe Strap Elkhart 32424 2-Hole Tube Strap B and K P24-075HC Pipe Clamps
Copper plated two-hole strap to secure pipe.  Corrosion resistant, for indoor & outdoor use. Contractor Pack - Bagged Durable polypropylene half clamp provides an easy and efficient way to secure pipes.  Clamp snaps around pipe and preloaded barbed nails allow pipe to secured in any direction.
Genova 50467/TCA-0750 CPVC Fitting Elkhart 32426 2-Hole Tube Strap B and K G72-050HC Split Ring Hangers
Used in conjunction with a brass compression fitting to transition to a CPVC fitting. Replaces the ferrule. Contractor Pack - Bagged B & K Ring Hanger, Split, 1/2 in Opening, Malleable Iron, Galvanized
B and K G72-075HC Split Ring Hangers B&K G60-038HC Beam Clamp B & K Industries P27-075HC Pipe Insulator
B & K Ring Hanger, Split, 3/4 in Opening, Malleable Iron, Galvanized Galvanized malleable iron universal beam clamp used to attach hanger rod to top or bottom of a beam or joist. Durable polypropylene pipe insulator.  V-shaped notch to easily snap onto pipe.  Flanged with holes for secure installation.  Eliminates noise and vibration.
B & K Industries P27-050HC Pipe Insulator B&K G13-150HC 2-Hole Pipe Strap B&K G13-075HC 2-Hole Pipe Strap
Durable polypropylene pipe insulator.  V-shaped notch to easily snap onto pipe.  Flanged with holes for secure installation.  Eliminates noise and vibration. Galvanized steel two-hole strap to secure pipe.  Two holes for use with nails or screws to ensure stable fit. Galvanized steel two-hole strap to secure pipe.  Two holes for use with nails or screws to ensure stable fit.
Genova E30105C Solvent Weld Extended Pipe Coupling B and K Industries C23-050HC J-Hook B&K C13-200HC 2-Hole Pipe Strap
Used to join lengths of pipe. Conforms to ASTM D2466. Provides quick nail support. Copper plated two-hole strap to secure pipe.  Corrosion resistant, for indoor & outdoor use.
Worldwide Sourcing TWC0534-3L Hanger Iron B and K P24-100HC Pipe Clamps Mintcraft 8317-B Plungers
Galvanized finish. 3/4" x 10' Durable polypropylene half clamp provides an easy and efficient way to secure pipes.  Clamp snaps around pipe and preloaded barbed nails allow pipe to secured in any direction. Force black rubber cup, 9" wood handle.
B and K G72-100HC Split Ring Hangers B&K G13-200HC 2-Hole Pipe Strap B&K G60-050HC Beam Clamp
B & K Ring Hanger, Split, 1 in Opening, Malleable Iron, Galvanized Galvanized steel two-hole strap to secure pipe.  Two holes for use with nails or screws to ensure stable fit. Galvanized malleable iron universal beam clamp used to attach hanger rod to top or bottom of a beam or joist.
B and K Industries P28-100HC Pipe Clamp B and K Industries G65-075HC Clevis Hanger Genova 50705CP CPVC Fittings
Durable polypropylene standard clamp.  Split, ribbed design to allow for expansion and contraction after installation.  Flanged with holes for secure installation. Galvanized steel for IPS pipe.  For use with all thread rod up to 3/8".  Works as a suspension style hanger. SLIP X SLIP Used to change direction in piping.
B and K V30-150HC Pipe Hangers B and K Industries G65-100HC Clevis Hanger B and K Industries G10-050HC Pipe Hook
Vinyl coated galvanized steel DWV pipe hanger.  Locking screw keeps pipe secure.  Keyhole design provides faster installation.  Perforated holes allow for several hanging lengths. Galvanized steel for IPS pipe.  For use with all thread rod up to 3/8".  Works as a suspension style hanger. Galvanized steel water pipe supply hook.  Nail point ends for easy drive-in use. Vinyl coated.
Genova 53128 CPVC Fittings B&K G18-050HC 1-Hole Pipe Strap B and K Industries G65-150HC Clevis Hanger
Solvent welds directly into 1/2'' CPVC fitting socket and adapts to female hose coupling. Galvanized steel one-hole strap to secure pipe.  One hole for use with nails or screws to ensure stable fit in tight areas. Galvanized steel for IPS pipe.  For use with all thread rod up to 3/8".  Works as a suspension style hanger.
B and K Industries G10-075HC Pipe Hook Elkhart 83003 2-Hole Tube Strap B and K Industries P25-100HC Pipe Clamp
Galvanized steel water pipe supply hook.  Nail point ends for easy drive-in use. Vinyl coated. Contractor Pack - Bagged Durable polypropylene full clamp provides an easy and efficient way to secure pipes.  Clamp grips, insulates, and isolates the pipe from the mounting surface.  Preloaded barbed nails allow pipe to secured in any direction.
B&K C22-075HC J-Nail Pipe Strap B and K V30-200HC Pipe Hangers Genova E30107C Solvent Weld Extended Pipe Coupling
Provides quick nail support. Vinyl coated galvanized steel DWV pipe hanger.  Locking screw keeps pipe secure.  Keyhole design provides faster installation.  Perforated holes allow for several hanging lengths. Used to join lengths of pipe. Conforms to ASTM D2466.
B&K P20-250HC Perforated Hanger Tape B&K G18-075HC 1-Hole Pipe Strap B and K Industries G10-100HC Pipe Hook
Plastic strapping with perforated holes to be used for securing any size pipe.  Allows custom straps to be fabricated.  Easy to cut and lightweight. Galvanized steel one-hole strap to secure pipe.  One hole for use with nails or screws to ensure stable fit in tight areas. Galvanized steel water pipe supply hook.  Nail point ends for easy drive-in use. Vinyl coated.
American Valve P600U 1/2 PVC Fitting B and K Industries G65-200HC Clevis Hanger B and K Industries C10-050HC Pipe Hook
For use in general piping applications,for Sch 40 metal and plastic pipe. Easy to operate for instant emergency piping. Piping must be restrained. Galvanized steel for IPS pipe.  For use with all thread rod up to 3/8".  Works as a suspension style hanger. Copper plated water pipe supply hook.  Corrosion resistant, for indoor & outdoor use.  Nail point ends for easy drive-in use.
B and K Industries V30-300HC Pipe Hanger B&K C13-038HC 2-Hole Pipe Strap Genova 50105CP CPVC Fitting
Vinyl coated galvanized steel DWV pipe hanger.  Locking screw keeps pipe secure.  Keyhole design provides faster installation.  Perforated holes allow for several hanging lengths. Copper plated two-hole strap to secure pipe.  Corrosion resistant, for indoor & outdoor use. Used to join straight lengths of CPVC tubing.
B and K C10-075HC Pipe Hooks American Valve P600CTS 1/2 CPVC Fitting Elkhart 83005 2-Hole Tube Strap
Copper plated water pipe supply hook.  Corrosion resistant, for indoor & outdoor use.  Nail point ends for easy drive-in use. For use in general piping applications,using copper tube sized pipe. Easy to operate for instant emergency piping. Piping must be restrained Contractor Pack - Bagged
B and K Industries C10-100HC Pipe Hook B and K V30-400HC Pipe Hangers HOOK J 10PK 1/2IN
HOOK J 10PK 1/2IN
Our Price: $2.77
Copper plated water pipe supply hook.  Corrosion resistant, for indoor & outdoor use.  Nail point ends for easy drive-in use. Vinyl coated galvanized steel DWV pipe hanger.  Locking screw keeps pipe secure.  Keyhole design provides faster installation.  Perforated holes allow for several hanging lengths.
B and K G72-125HC Split Ring Hangers Genova 50107CP CPVC Fittings American Valve P600U 3/4 PVC Fitting
B & K Ring Hanger, Split, 1-1/4 in Opening, Malleable Iron, Galvanized Used to join straight lengths of CPVC tubing. For use in general piping applications,for Sch 40 metal and plastic pipe. Easy to operate for instant emergency piping. Piping must be restrained.
KBI SNX Snap-Fix Pipe Repair Coupling Worldwide Sourcing TC-15 Flexible Test Caps B and K G72-150HC Split Ring Hangers
NSF Standard 61 listed. Compact design. Unique positive snapping lock assures strong seal without the need to hold product in place. (Strong, fast and permanent). Meets/exceeds ASTM and ANSI standards. Made with high-impact PVC Type II Cell Class 15344-C. Carded. For capping pipe ends. Convex face allows the cap to withstand greater pressure for testing purposes and minimizes ballooning. For temporary or permanent use. Can be use with any material. Suitable for underground use. Not for use on pressurized plumbing systems. Meets ASTM C-1173, C-1277, C1460, CISPI 310, IAPMO PS 109, PS90, & CSA B602. B & K Ring Hanger, Split, 1-1/2 in Opening, Malleable Iron, Galvanized
HOOK J 10PK 3/4IN             Elkhart 83006 2-Hole Tube Strap Genova 300 Solvent Weld Pipe Coupling
HOOK J 10PK 3/4IN
Our Price: $3.12
Contractor Pack - Bagged Used to join lengths of pipe. Conforms to ASTM D2466.
B and K Industries 160-203HC CPVC Fitting KBI SNX Snap-Fix Pipe Repair Coupling Genova 51405CP CPVC Fittings
CPVC body, nut, rubber gaskets, rated at 100 PSI up to 180 deg F. Pipe must be restrained after installation, Use in piping or repairs on copper or plastic pipe. NSF approved. NSF Standard 61 listed. Compact design. Unique positive snapping lock assures strong seal without the need to hold product in place. (Strong, fast and permanent). Meets/exceeds ASTM and ANSI standards. Made with high-impact PVC Type II Cell Class 15344-C. Carded. Used to provide a branch supply line from a main line.
B and K G72-200HC Split Ring Hangers Mintcraft 8318-B Toilet Plungers Fernco PQC-101 Qwik Caps
B & K Ring Hanger, Split, 2 in Opening, Malleable Iron, Galvanized Force black cup, 21" wood handle. Easy way to cap pipe ends, clean-outs and open test pipes. Made of flexible PVC, they're suitable for above ground or underground use, on cast iron, steel, copper or plastic piping. Designed to fit all drain, waste, and vent pipe materials in a given nominal size. The convex face allows the cap to withstand greater pressure for testing purposes and minimizes ballooning. To install, simply place over open end of pipe and tighten to 60" pounds torque. Complies with ASTM D5926.
Epc 50155 Tube Cap Genova 50707CP CPVC Fittings Plumb Pak PP855-8 Pipe Strap
Used to permanently or temporarily cap CPVC. Most often used in conjunction with short lengths of CPVC tubing to fabricate water hammer arrestors (air chambers) in the CPVC system. Bagged. SLIP X SLIP Used to change direction in piping. 3/4'" x 10'. For hanging pipes, fastening faucets and valves, repair jobs and more.
Genova 500 Tubing Strap Genova 500 Tubing Strap Genova 52905 CPVC Fitting
Incorporates a special design which allows for pipe expansion, straps can be used on copper, CPVC and polybutylene tubing. Nails are not included. Incorporates a special design which allows for pipe expansion, straps can be used on copper, CPVC and polybutylene tubing. Nails are not included. Used to change direction in piping from a fitting socket. Also used in conjunction with a conventional CPVC 90 degree elbow to fabricate a change of direction of piping at any angle.
Genova 53010 Genogrip CPVC Fittings Worldwide Sourcing TC-2 Flexible Test Caps Genova Products 50175 CPVC Coupling
Solvent welds directly onto 1/2" CPVC tubing and adapts mechanically to 3/8" O.D. PEX tubing or copper tubing. Most often used to adapt from 1/2" CPVC tubing risers through floor to 3/8" O.D. closet or lavatory riser tubes. Can also be used with metal risers. For capping pipe ends. Convex face allows the cap to withstand greater pressure for testing purposes and minimizes ballooning. For temporary or permanent use. Can be use with any material. Suitable for underground use. Not for use on pressurized plumbing systems. Meets ASTM C-1173, C-1277, C1460, CISPI 310, IAPMO PS 109, PS90, & CSA B602. Used to join straight lengths of CPVC tubing to smaller size tubing.
Flo Control QUIK-FIX Expansion Pipe Repair Coupling Genova 500 Pipe Reducing Bushing Genova 50405CP CPVC Fittings
Made of high-impact PVC Type II material in 1-piece cylinder to avoid leaks - no solvent weld necessary. Internal, high-quality, self-lubricating EDPM o-ring for long life and smooth movement. 150-psi pressure rated in all positions. Complies with all applicable ASTM and ANSI standards, NSF Approved. Used to reduce from fitting socket to CPVC tubing. Bagged. Used to adapt to female metal threaded fittings in cold water applications only! Use Teflon tape to seal pipe threads. Do not use other materials or compounds unless specifically approved by manufacturer.
Flo Control QUIK-FIX Expansion Pipe Repair Coupling KBI TFS Pipe Transition Adapter Genova E30110C Solvent Weld Extended Pipe Coupling
Made of high-impact PVC Type II material in 1-piece cylinder to avoid leaks - no solvent weld necessary. Internal, high-quality, self-lubricating EDPM o-ring for long life and smooth movement. 150-psi pressure rated in all positions. Complies with all applicable ASTM and ANSI standards, NSF Approved. Unique molded CPVC/Stainless Steel design with internal "knurl" and EPDM O'ring insures reliability and integrity. Large Stainless steel hex for easy connection to IPS sized pipe and fittings. Meets/exceeds ASTM and ANSI standards. Pressure rated to 100 psi at 180 degrees F. Made with EverTUFF CPVC and Type 304 Stainless Steel. Used to join lengths of pipe. Conforms to ASTM D2466.
Fernco PQC-102 Qwik Caps B&K P20-500HC Perforated Hanger Tape Oatey 33400 Mechanical Test Plug
Easy way to cap pipe ends, clean-outs and open test pipes. Made of flexible PVC, they're suitable for above ground or underground use, on cast iron, steel, copper or plastic piping. Designed to fit all drain, waste, and vent pipe materials in a given nominal size. The convex face allows the cap to withstand greater pressure for testing purposes and minimizes ballooning. To install, simply place over open end of pipe and tighten to 60" pounds torque. Complies with ASTM D5926. Plastic strapping with perforated holes to be used for securing any size pipe.  Allows custom straps to be fabricated.  Easy to cut and lightweight. Plastic mechanical plug designed to hold higher pressures.  Used for plugging open ended piping as protection from dirt, dust, or debris. Maximum allowed air is 5 PSIG
American Valve P600CTS 3/4 CPVC Fitting B and K Industries 160-204HC CPVC Fitting Drano 116 Drain Opener
For use in general piping applications,using copper tube sized pipe. Easy to operate for instant emergency piping. Piping must be restrained CPVC body, nut, rubber gaskets, rated at 100 PSI up to 180 deg F. Pipe must be restrained after installation, Use in piping or repairs on copper or plastic pipe. NSF approved. Breaks down clogs on contact. Clogs are minimized or dissolved after 15 to 30 minutes. Contains a special ingredient to protect pipes from corrosion. Safe for plastic, PVC, metal pipes, garbage disposals and septic systems.
KBI SNX Snap-Fix Pipe Repair Coupling KBI TMS-0500 Pipe to Tube Adapter Genova 53070 Genogrip CPVC  Red Street Adapter
NSF Standard 61 listed. Compact design. Unique positive snapping lock assures strong seal without the need to hold product in place. (Strong, fast and permanent). Meets/exceeds ASTM and ANSI standards. Made with high-impact PVC Type II Cell Class 15344-C. Carded. Unique molded CPVC/Stainless Steel design with internal "knurl" and EPDM O'ring insures reliability and integrity. Large Stainless steel hex for easy connection to IPS sized pipe and fittings. Meets/exceeds ASTM and ANSI standards. Pressure rated to 100 psi at 180 degrees F. Made with EverTUFF CPVC and Type 304 stainless steel. Allows any fitting hub to be reduced to accept PEX, copper or CPVC tubing
Worldwide Sourcing TC-3 Flexible TestCaps Genova 300 Solvent Weld Pipe Coupling Genova 500 Solvent Weld Joints Pipe Union With Metal Bracket
For capping pipe ends. Convex face allows the cap to withstand greater pressure for testing purposes and minimizes ballooning. For temporary or permanent use. Can be use with any material. Suitable for underground use. Not for use on pressurized plumbing systems. Meets ASTM C-1173, C-1277, C1460, CISPI 310, IAPMO PS 109, PS90, & CSA B602. Used to join lengths of pipe. Conforms to ASTM D2466. Solvent welds directly to CPVC tubing and provides a method for future disassembly of tubing without cutting.
American Valve P600U 1 PVC Fitting Genova Genogrip 500 Angle Tube Adapter Genova 52105 Tube Hanger
For use in general piping applications,for Sch 40 metal and plastic pipe. Easy to operate for instant emergency piping. Piping must be restrained. Solvent welds directly onto 1/2" CPVC tubing and adapts mechanically to 3/8" OD Pex or copper tubing. Most often used to adapt from 1/2" CPVC tubing risers through the wall to 3/8" OD closet and/or lavatory riser tubes. Can also be used with metal risers. Incorporates a special design which allows for pipe expansion. Can be used on copper as well as CPVC. Recommends using #6x1" screws which do not require a pre-drilling.
Genova 52107 Tube Hanger B&K C20-124HC Pipe Strap Genova Products 50705 CPVC 90 Degree Elbow
Incorporates a special design which allows for pipe expansion. Can be used on copper as well as CPVC. Recommends using #6x1" screws which do not require a pre-drilling. Copper plated 24 gauge strapping with perforated holes to be used for securing any size pipe.  Corrosion resistant, for indoor & outdoor use. Allows custom straps to be fabricated. SLIP X SLIP Used to change direction in piping.
Flo Control QUIK-FIX Expansion Pipe Repair Coupling Epc 500 Tube Cap Flo Control CCC-0500 Tube Coupling
Made of high-impact PVC Type II material in 1-piece cylinder to avoid leaks - no solvent weld necessary. Internal, high-quality, self-lubricating EDPM o-ring for long life and smooth movement. 150-psi pressure rated in all positions. Complies with all applicable ASTM and ANSI standards, NSF Approved. Used to permanently or temporarily cap CPVC. Most often used in conjunction with short lengths of CPVC tubing to fabricate water hammer arrestors (air chambers) in the CPVC system. Bagged. Flo Control Tube Coupling, 1/2 in Nominal, Compression End, 4 in Length, 150 psi Working, PVC, ASTM D2846, White, 72 deg F, ANSI/NSF 61+372, IAPMO Certified, UPC Compliant, For Irrigation, Pool and Spa Industries
Fernco PQC-103 Qwik Caps Oatey 33401 Mechanical Test Plug KBI DE-0500-S Pipe Elbow
Easy way to cap pipe ends, clean-outs and open test pipes. Made of flexible PVC, they're suitable for above ground or underground use, on cast iron, steel, copper or plastic piping. Designed to fit all drain, waste, and vent pipe materials in a given nominal size. The convex face allows the cap to withstand greater pressure for testing purposes and minimizes ballooning. To install, simply place over open end of pipe and tighten to 60" pounds torque. Complies with ASTM D5926. Plastic mechanical plug designed to hold higher pressures.  Used for plugging open ended piping as protection from dirt, dust, or debris. Maximum allowed air is 5 PSIG 90 degree elbow. CPVC/304 stainless steel technology with internal "knurl" and EDM. O'ring insuring reliability and integrity. Meets/exceeds all ASTM and ANSI standards. Made with Ever TUFF CPVC.
Master Plunger MPS4 Sink and Tub Plunger KBI TFS Pipe Transition Adapter KBI TMS-0750 Pipe to Tube Adapter
Small for sinks, showers, and floors drains. Moves 3 times more displacement and holds a better seal than the standard rubber cup plunger. Unique molded CPVC/Stainless Steel design with internal "knurl" and EPDM O'ring insures reliability and integrity. Large Stainless steel hex for easy connection to IPS sized pipe and fittings. Meets/exceeds ASTM and ANSI standards. Pressure rated to 100 psi at 180 degrees F. Made with EverTUFF CPVC and Type 304 Stainless Steel. Unique molded CPVC/Stainless Steel design with internal "knurl" and EPDM O'ring insures reliability and integrity. Large Stainless steel hex for easy connection to IPS sized pipe and fittings. Meets/exceeds ASTM and ANSI standards. Pressure rated to 100 psi at 180 degrees F. Made with EverTUFF CPVC and Type 304 stainless steel.
American Valve P600U 1 1/4 PVC Fitting Flo Control CCC-0750 Tube Coupling Worldwide Sourcing TC-4 Flexible Test Caps
For use in general piping applications,for Sch 40 metal and plastic pipe. Easy to operate for instant emergency piping. Piping must be restrained. Flo Control Tube Coupling, 3/4 in Nominal, Compression End, 4 in Length, 150 psi Working, PVC, ASTM D2846, White, 72 deg F, ANSI/NSF 61+372, IAPMO Certified, UPC Compliant, For Irrigation, Pool and Spa Industries For capping pipe ends. Convex face allows the cap to withstand greater pressure for testing purposes and minimizes ballooning. For temporary or permanent use. Can be use with any material. Suitable for underground use. Not for use on pressurized plumbing systems. Meets ASTM C-1173, C-1277, C1460, CISPI 310, IAPMO PS 109, PS90, & CSA B602.
Genova Products 50407 CPVC Male Adapter Fernco PQC-104 Qwik Caps Oatey 33402 Mechanical Test Plug
Used to adapt to female metal threaded fittings in cold water applications only! Use Teflon tape to seal pipe threads. Do not use other materials or compounds unless specifically approved by manufacturer. Easy way to cap pipe ends, clean-outs and open test pipes. Made of flexible PVC, they're suitable for above ground or underground use, on cast iron, steel, copper or plastic piping. Designed to fit all drain, waste, and vent pipe materials in a given nominal size. The convex face allows the cap to withstand greater pressure for testing purposes and minimizes ballooning. To install, simply place over open end of pipe and tighten to 60" pounds torque. Complies with ASTM D5926. Plastic mechanical plug designed to hold higher pressures.  Used for plugging open ended piping as protection from dirt, dust, or debris. Maximum allowed air is 5 PSIG
Genova 50407CP CPVC Fittings Genova Products 50105 CPVC Coupling Genova 500 Solvent Weld Joints Transition Union
Used to adapt to female metal threaded fittings in cold water applications only! Use Teflon tape to seal pipe threads. Do not use other materials or compounds unless specifically approved by manufacturer. Used to join straight lengths of CPVC tubing. Designed to compensate for the difference in coefficients of expansion which exist between CPVC and metal pipe in hot water applications. Solvent welds directly to CPVC tube and adapts to standard male pipe threads. Use Teflon tape to seal pipe threads, do not use other materials or compounds unless approved by manufacturer.
Liquid Plumr Strength-Pro Professional Strength Drain Opener Liquid-Plumr Foaming Pipe Snake 00216 Clog Remover Genova 79716 Pipe Hanger
Works fast to clear fully clogged drains with standing water and slow drains. Gel penetrates and dissolves clogs. Removes hair, gunk, grease, & soap scum. Safe for all pipes (PVC, plastic, copper, old pipes), septic systems and garbage disposals. Two powerful liquids activate on contact to form a deep cleaning foam. Works fast to dissolve hair and gunk. Penetrates deep into pipe to find clog. Safe for all pipes (PVC, plastic, copper, old pipes), septic systems and garbage disposals. Incorporates a special design which allow for pipe expansion and contraction. Saddle rotates 360 degrees. Nails not included.
Blow Out 30-475 Industrial Strength Drain Opener Mintcraft TP6063L Toilet Plungers Mintcraft 8324-B-D3L Plunger
Biodegradeable and environmentally safe, dissolves hair, grease, soap and other organic materials. Blue cup,19" plastic handle. Black rubber cup, 21" wood handle.
Worldwide Sourcing PMB-424 Pipe Straps Genova Products 50107 CPVC Coupling Genova 530751 Genogrip
3/4" x 10'. Used to join straight lengths of CPVC tubing. These patented adapters solvent weld directly into standard fittings and adapt mechanically to both PEX tubing and copper tubing by utilizing a special metal gripper ring supplied with the fitting. These fittings can be used in conjunction with CPVC fittings to create an unlimited range of fittings to connect to any type of water supply tubing.
Genova 53085 Genogrip CPVC Fittings Genova 79721 Pipe Hanger Genova 51407CP CPVC Fittings
These patented adapters solvent weld directly into standard fittings and adapt mechanically to both PEX tubing and copper tubing by utilizing a special metal gripper ring supplied with the fitting. These fittings can be used in conjunction with CPVC fittings to create an unlimited range of fittings to connect to any type of water supply tubing. Incorporates a special design which allow for pipe expansion and contraction. Saddle rotates 360 degrees. Nails not included. Used to provide a branch supply line from a main line.
Drano 22118 Max Clog Remover Tank Master 090300 Power Plunger B&K G20-524HC Pipe Strap
Formulated thick to dissolve the toughest clogs fast. Pours through water straight to the clog. Has a special ingredient to protect pipes from corrosion. Safe for plastic, PVC, metal pipes, garbage disposals, and septic systems. Won't harm pipes when used overnight. Flexible black rubber cup with 21" yellow wood handle. Works at all angles to clean clogged toilets in a hurry. Galvanized steel 24 gauge strapping with perforated holes to be used for securing any size pipe.  Allows custom straps to be fabricated.
Genova 500 Solvent Weld Joints Pipe Union Genova 79731 Pipe Hanger Drano Dual Force 14768 Professional Strength Foamer Clog Remover
Solvent welds directly to CPVC tubing and provides a method for future disassembly of tubing without cutting. Incorporates a special design which allow for pipe expansion and contraction. Saddle rotates 360 degrees. Nails not included. Deep-cleaning foam purges pipe walls of hair and gunk and attacks places ordinary liquids can't reach. It's also safe for all pipes and septic systems.
Genova 500 Solvent Weld Joints Transition Union Liquid Plumr Snake Plus Professional Strength Drain Opener Genova 300 Solvent Weld Pipe Coupling
Designed to compensate for the difference in coefficients of expansion which exist between CPVC and metal pipe in hot water applications. Solvent welds directly to CPVC tube and adapts to standard female pipe threads. Use Teflon tape to see pipe threads, do not use other materials or compounds unless approved by the manufacturer. Combines the strength of Liquid Plumr Gel with convenience of the snake for tough clogs. 18 oz gel. Used to join lengths of pipe. Conforms to ASTM D2466.
Genova Products 50405 CPVC Male Adapter American Valve P600U 1 1/2 PVC Fitting Oatey 33403 Mechanical Test Plug
Used to adapt to female metal threaded fittings in cold water applications only! Use Teflon tape to seal pipe threads. Do not use other materials or compounds unless specifically approved by manufacturer. For use in general piping applications,for Sch 40 metal and plastic pipe. Easy to operate for instant emergency piping. Piping must be restrained. Plastic mechanical plug designed to hold higher pressures.  Used for plugging open ended piping as protection from dirt, dust, or debris. Maximum allowed air is 5 PSIG
Genova 500 Transition Union Genova 52907 CPVC Fitting Genova 79741 Pipe Hanger
Designed to compensate for the difference in coefficients of expansion which exist between CPVC and metal pipe in hot water applications. Solvent welds directly to CPVC tube and adapts to standard male pipe threads. Use Teflon tape to seal pipe threads, do not use other materials or compounds unless approved by manufacturer. Used to change direction in piping from a fitting socket. Also used in conjunction with a conventional CPVC 90 degree elbow to fabricate a change of direction of piping at any angle. Incorporates a special design which allow for pipe expansion and contraction. Saddle rotates 360 degrees. Nails not included.
American Valve P600U 2 PVC Fitting Drano Snake Plus 70241 Drain Cleaner Master Plunger MP100-1 Drain Plunger
For use in general piping applications,for Sch 40 metal and plastic pipe. Easy to operate for instant emergency piping. Piping must be restrained. 18" snake bends safely through your pipes, and the thick clog-busting formula has a special ingredient to protect pipes from corrosion. Safe for plastic, PVC, metal pipes, garbage disposals and septic systems. Unique bellows delivers more plunge power per push. Nose funnel directs plunge blast down the drain - not out the side of plunger. Pommel top handle you can really get a grip on. Super-strong polyethylene construction. Fits all toilet bowls.
Genova Products 50605 CPVC 45 Degree Elbow Genova Products 51405 CPVC Tee Genova 500 Solvent Weld Joints Transition Union
Used to change direction in piping. Sometimes used in conjunction with a 12"L CPVC tubing on long runs to absorb expansion. Bagged. Used to provide a branch supply line from a main line. Used to transition from copper or brass tube to CPVC. Permits easy disassembly of piping system. Remove CPVC component and gasket before making sweat connection.
American Valve P600CTS 1 CPVC Fitting Pure Lye 30-500 Drain Opener Master Plunger MP1600 Toilet Plunger
For use in general piping applications,using copper tube sized pipe. Easy to operate for instant emergency piping. Piping must be restrained Super pure, bead size drain opener. Industrial strength, biodegradable, clears out drains, grease traps, septic systems, roots. Odorless non-acid formula is safe on fine fixtures, chrome trim and plastic pipes. Designed for low-volume 1.6-gallon toilets. Extended funnel nose design ensures a perfect seal and prevents unwanted slippage and splash back. 83 cubic inch displacement takes care of the toughest clogs, fast.
KBI TPC-0500 Pipe to Tube Adapter DRAIN CLEANER GEL 80OZ        Genova 500 Solvent Weld Joints Transition Union
Molded CPVC/stainless steel design with internal "knurl" and EPDM O-ring insures reliability and integrity. Meets/exceeds ASTM and ANSI standards. Made with EverTUFF CPVC and Type 304 stainless steel. Pressure rated to 100 PSI at 180 degrees F. Formulated thick to dissolve the toughest clogs fast. Pours through water straight to the clog. Has a special ingredient to protect pipes from corrosion. Safe for plastic, PVC, metal pipes, garbage disposals, and septic systems. Won't harm pipes when used overnight. Designed to compensate for the difference in coefficients of expansion which exist between CPVC and metal pipe in hot water applications. Solvent welds directly to CPVC tube and adapts to standard female pipe threads. Use Teflon tape to see pipe threads, do not use other materials or compounds unless approved by the manufacturer.
GRANULES KITCHEN 17.64OZ      B K Industries 160-003HC Compression Couplings Crystal Heat ZUCRY2 Drain Opener
Drano Kitchen Granules formula melts grease and is the only product specifically designed for kitchen clogs. It is safe on all pipes. Simply pour it into the drain, follow with hot water and wait 15 minutes. Specifically designed to destroy tough, greasy kitchen clogs Hydroformed steel body, rubber compression gasket, and metal friction ring, rated up to 125 PSI at 210 degrees F., iron pipe size for piping or repairs on galvanized pipe. Works great on grease and other kitchen clogs, won't harm pipes, septic tanks or cesspools.
Drain Care ZDC16 Build-Up Remover Flo Control QUIK-FIX Expansion Pipe Repair Coupling Genova 500 Transition Union
Enzymatic drain cleaner ends slow drains. Safe for all plumbing. Cleans and removes years of build-up from plumbing systems. Made of high-impact PVC Type II material in 1-piece cylinder to avoid leaks - no solvent weld necessary. Internal, high-quality, self-lubricating EDPM o-ring for long life and smooth movement. 150-psi pressure rated in all positions. Complies with all applicable ASTM and ANSI standards, NSF Approved. Used to transition from metal male pipe threads to CPVC. Permits easy disassembly of piping system.
Oatey 43789 Dwv Saddle Tee Kit Master Plunger MP500-B4 Plunger Genova 500 Solvent Weld Joints Transition Union
Complete with tee and U-bolts, nuts and washers. Available in two sizes which provide capability of tapping 1-1/2" or 2" DWV pipe to 3" or 4" existing schedule 40 DWV pipe.  3" x 2" and 4" x 2" spigots accept 1-1/2" schedule 40 DWV inside socket, joins to 2" with 2" couplings. Allows tapping of existing DWV lines without cutting pipe. Fits inside 2" DWV with couplings. All-purpose residential plunger designed to fit all drains even hard-to-reach bathroom sink drains. Streamline design can easily flex under the waterspout to clear drains. Storage bucket included. Used to transition from metal female pipe threads to CPVC. Permits easy disassembly of piping.
B and K 160-303NL Compression Couplings KBI TPC-0750 Pipe to Tube Adapter Genova Products 50475 CPVC Fittings
Brass body and nut, rubber gaskets. Rated up to 125 PSI at 210 DegF. Molded CPVC/stainless steel design with internal "knurl" and EPDM O-ring insures reliability and integrity. Meets/exceeds ASTM and ANSI standards. Made with EverTUFF CPVC and Type 304 stainless steel. Pressure rated to 100 PSI at 180 degrees F. Used to adapt to metal FIP threaded fittings to smaller pipe size in cold water applications only! Teflon thread tape is recommended for threaded joints. Boxed.
Genova 61231 Dwv Saddle Tee Roebic K-67BAG Drain and Trap Cleaner Plumb Pak PP32-10BRLF CPVC Transition Fittings
Solvent welds directly onto the side of a 3" pipe to provide a simple way of connecting a branch into a drain pipe. The inlet is constructed to accept a 2" fitting over its outside diameter or an 1-1/2" pipe into its inside diameter. CAN BE GLUED WITH PVC CEMENT. A concentrated bacterial based product that keeps drains and traps running freely with a regular application.  A powerful non-corrosive and natural drain cleaning product. Will not damage plumbing, pipes, toilets or burn skin. Connects CPVC pipe/tubing to threaded pipe. Drilled through, no tube stop.
Epc 50158 Tube Cap Genova 500 Solvent Weld Joints Transition Union Genova Products 50707 CPVC 90 Degree Elbow