Home > PLUMBING > ROUGH PLUMBING SUPPLIES > PIPE REPAIR > PIPE REPAIR CLAMPS
Sort By:
1
Genova E30107 Solvent Weld Extended Pipe Coupling Genova E30105 Solvent Weld Extended Pipe Coupling Genova 300 Solvent Weld Pipe Adapter
Used to join lengths of pipe. Conforms to ASTM D2466. Used to join lengths of pipe. Conforms to ASTM D2466. Adapts pressure pipe to standard female pipe threads. Teflon thread tape is recommended for threaded joints. Conforms to ASTM D2466.
Genova 300 Solvent Weld Pipe Adapter Genova E30110 Solvent Weld Extended Pipe Coupling Genova 300 Solvent Weld Pipe Coupling
Adapts pressure pipe to standard female pipe threads. Teflon thread tape is recommended for threaded joints. Conforms to ASTM D2466. Used to join lengths of pipe. Conforms to ASTM D2466. Used for joining sections of threaded pipe and nipples. Teflon thread tape is recommended for threaded joints. Conforms to ASTM D2466.
Genova 300 Solvent Weld Pipe Adapter Genova 300 Solvent Weld Pipe Adapter Genova 300 Solvent Weld Pipe Adapter
Adapts pressure pipe to standard male pipe threads. Teflon thread tape is recommended for threaded joints. Conforms to ASTM D2466. Adapts pressure pipe to standard male pipe threads. Teflon thread tape is recommended for threaded joints. Conforms to ASTM D2466. Adapts pressure pipe to standard female pipe threads. Teflon thread tape is recommended for threaded joints. Conforms to ASTM D2466.
Genova 300 Solvent Weld Pipe Reducing Coupling Genova 53056 CPVC Fitting Genova 300 Solvent Weld Pipe Adapter
Used to reduce or increase pipe size. Conforms to ASTM D2466. Used to change direction in piping and features lugs for fastening. Often used in conjunction with No.530671 washer hose valve for hooking up to automatic clothes washers and for fabricating water supply piping stub outs for toilet installation. Sometimes called a Drop Ear elbow. Adapts pressure pipe to standard male pipe threads. Teflon thread tape is recommended for threaded joints. Conforms to ASTM D2466.
Genova 300 Solvent Weld Pipe Reducing Adapter Genova 34505 Riser Extension Genova 300 Solvent Weld Pipe Reducing Adapter
Adapts pressure pipe to standard female pipe threads. Reduces to smaller pipe size. Teflon thread tape is recommended for threaded joints. Conforms to ASTM D2466. Used to extend sprinkler risers. May be used in initial installation or for replacement purposes. PTFE thread tape is recommended for threaded joints. Adapts pressure pipe to standard male pipe threads. Fitting reduces to smaller pipe size. Teflon thread tape is recommended for threaded joints. Conforms to ASTM D2466.
Genova 300 Solvent Weld Extended Pipe Coupling Genova 300 Solvent Weld Extended Pipe Coupling Genova 300 Solvent Weld Pipe Reducing Coupling
Used to join lengths of pipe. Conforms to ASTM D2466. Used to join lengths of pipe. Conforms to ASTM D2466. Used to reduce or increase pipe size. Conforms to ASTM D2466.
Genova 300 Solvent Weld Pipe Reducing Adapter Genova 50465/TCA-0500 CPVC Fitting Genova 300 Solvent Weld Pipe Adapter
Adapts pressure pipe to standard female pipe threads. Reduces to smaller pipe size. Teflon thread tape is recommended for threaded joints. Conforms to ASTM D2466. Used in conjunction with a brass compression fitting to transition to a CPVC fitting. Replaces the ferrule. Adapts pressure pipe to standard female pipe threads. Teflon thread tape is recommended for threaded joints. Conforms to ASTM D2466.
Genova 300 Solvent Weld Pipe Coupling Genova Products 53055 CPVC Wing Elbow Genova 300 Solvent Weld Extended Pipe Coupling
Used for joining sections of threaded pipe and nipples. Teflon thread tape is recommended for threaded joints. Conforms to ASTM D2466. Adapts from 1/2" CPVC to 1/2" male metal pipe thread and features lugs for fastening. Used on tub and shower faucets to adapt from 1/2" CPVC riser to shower arm. Sometimes called a Drop Ear elbow. Hand tighten only; seals by means of a special elastomeric gasket to ensure leakproof seal, use of joint compound or Teflon tape is neither necessary or recommended. Used to join lengths of pipe. Conforms to ASTM D2466.
Worldwide Sourcing 31-1/4G Galvanized Pipe Malleable Plug Genova 300 Solvent Weld Pipe Reducing Adapter Genova 300 Solvent Weld Pipe Reducing Adapter
For steam and water working pressure up to 150 pounds. Squared head, right hand threads. Adapts pressure pipe to standard female pipe threads. Reduces to smaller pipe size. Teflon thread tape is recommended for threaded joints. Conforms to ASTM D2466. Adapts pressure pipe to standard male pipe threads. Fitting reduces to smaller pipe size. Teflon thread tape is recommended for threaded joints. Conforms to ASTM D2466.
Genova 300 Solvent Weld Pipe Reducing Adapter Genova 300 Solvent Weld Pipe Coupling Genova 300 Solvent Weld Pipe Adapter
Adapts pressure pipe to standard male pipe threads. Fitting reduces to smaller pipe size. Teflon thread tape is recommended for threaded joints. Conforms to ASTM D2466. Used for joining sections of threaded pipe and nipples. Teflon thread tape is recommended for threaded joints. Conforms to ASTM D2466. Adapts pressure pipe to standard female pipe threads. Teflon thread tape is recommended for threaded joints. Conforms to ASTM D2466.
Worldwide Sourcing 31-3/8G Galvanized Pipe Malleable Plug Genova 300 Solvent Weld Pipe Adapter Worldwide Sourcing 31-1/2G Galvanized Pipe Malleable Plug
For steam and water working pressure up to 150 pounds. Squared head, right hand threads. Adapts pressure pipe to standard male pipe threads. Teflon thread tape is recommended for threaded joints. Conforms to ASTM D2466. For steam and water working pressure up to 150 pounds. Squared head, right hand threads.
Genova 300 Solvent Weld Pipe Adapter Genova 300 Solvent Weld Pipe Adapter Genova 50467/TCA-0750 CPVC Fitting
Adapts pressure pipe to standard female pipe threads. Teflon thread tape is recommended for threaded joints. Conforms to ASTM D2466. Adapts pressure pipe to standard male pipe threads. Teflon thread tape is recommended for threaded joints. Conforms to ASTM D2466. Used in conjunction with a brass compression fitting to transition to a CPVC fitting. Replaces the ferrule.
World Wide Sourcing 31-1/8G Galvanized Malleable Plug Genova 300 Solvent Weld Pipe Reducing Adapter Genova E30105C Solvent Weld Extended Pipe Coupling
For steam and water working pressure up to 150 pounds. Squared head, right hand threads. Adapts pressure pipe to standard female pipe threads. Reduces to smaller pipe size. Teflon thread tape is recommended for threaded joints. Conforms to ASTM D2466. Used to join lengths of pipe. Conforms to ASTM D2466.
Worldwide Sourcing 31-3/4G Galvanized Pipe Malleable Plug Genova 50705CP CPVC Fittings ROD CLIP POP-UP BATHROOM
For steam and water working pressure up to 150 pounds. Squared head, right hand threads. SLIP X SLIP Used to change direction in piping. Metal construction. Includes one small hole clevis clip and one large clevis clip. Fits most sinks.
Genova 53128 CPVC Fittings Flair-It 16841 Flair-It Pex Polybutylene Adapter World Wide Sourcing 4-1/2G Galvanized 45 Deg Elbow
Solvent welds directly into 1/2'' CPVC fitting socket and adapts to female hose coupling. For hot and cold water. 3/8" and 1/2" fits PEX or Polybutylene tubing only. 3/4" fits PEX tubing only, to use on Polybutylene use a PEX to Polybutylene transition fitting. Bar coded. Standard screwed, for steam and water working pressure up to 150 pounds. Flat banded, right hand threads.
Genova 300 Solvent Weld Pipe Adapter Genova E30107C Solvent Weld Extended Pipe Coupling Worldwide Sourcing 31-1G Galvanized Pipe Malleable Plug
Adapts pressure pipe to standard male pipe threads. Teflon thread tape is recommended for threaded joints. Conforms to ASTM D2466. Used to join lengths of pipe. Conforms to ASTM D2466. For steam and water working pressure up to 150 pounds. Squared head, right hand threads.
Flair-It 16842 Flair-It Flair-It 16860 Tube Cap Genova 50105CP CPVC Fitting
For hot and cold water. 3/8" and 1/2" fits PEX or Polybutylene tubing only. Bar coded. Used for capping off PEX fittings. Bar coded. Used to join straight lengths of CPVC tubing.
World Wide Sourcing 4-1/4G Galvanized 45 Deg Elbow World Wide Sourcing PPG120-10 Galvanized 45 Deg Elbow Genova 300 Solvent Weld Pipe Reducing Adapter
Standard screwed, for steam and water working pressure up to 150 pounds. Flat banded, right hand threads. Standard screwed, for steam and water working pressure up to 150 pounds. Flat banded, right hand threads. Adapts pressure pipe to standard female pipe threads. Reduces to smaller pipe size. Teflon thread tape is recommended for threaded joints. Conforms to ASTM D2466.
Flair-It 16859 Tube Cap Genova 300 Contractor Pack Solvent Weld Pipe Adapter World Wide Sourcing PPG120-6 Galv. Pipe Fitting
Used for capping off PEX fittings. Bar coded. Adapts pressure pipe to standard female pipe threads. Teflon thread tape is recommended for threaded joints. Conforms to ASTM D2466. Standard screwed, for steam and water working pressure up to 150 pounds. Flat banded, right hand threads.
Genova 50107CP CPVC Fittings Flair-It 16855 Flair-It Pex Polybutylene Coupling World Wide Sourcing 4-3/4G Galvanized 45 Deg Elbow
Used to join straight lengths of CPVC tubing. For hot and cold water. 3/8" and 1/2" fits PEX or Polybutylene tubing only. Bar coded. Standard screwed, for steam and water working pressure up to 150 pounds. Flat banded, right hand threads.
World Wide Sourcing PPG121-8 Galvanized 45 Deg Elbow Flair-It 16872 Flair-It Pex Polybutylene Adapter 3/4Comp x 3/4 MPT BSP Flair-It 16870 Flair-It
Standard screwed, for steam and water working pressure up to 150 pounds. Flat banded, right hand threads. For hot and cold water. 3/8" and 1/2" fits PEX or Polybutylene tubing only. 3/4" fits PEX tubing only, to use on Polybutylene use a PEX to Polybutylene transition fitting. Bar coded. For hot and cold water. 3/8" and 1/2" fits PEX or Polybutylene tubing only. Bar coded.
Genova 300 Solvent Weld Pipe Coupling Flair-It 16812 Flair-It Flair-It 16800 Flair-It
Used to join lengths of pipe. Conforms to ASTM D2466. For hot and cold water. 3/8" and 1/2" fits PEX or Polybutylene tubing only. 3/4" fits PEX tubing only, to use on Polybutylene use a PEX to Polybutylene transition fitting. Bar coded. For hot and cold water. 3/8" and 1/2" fits PEX or Polybutylene tubing only. 3/4" fits PEX tubing only, to use on Polybutylene use a PEX to Polybutylene transition fitting. Bar coded.
Genova 51405CP CPVC Fittings World Wide Sourcing PPG121-10 Galvanized 45 Deg Elbow World Wide Sourcing PPG121-15 Galvanized 45 Deg St Elbow
Used to provide a branch supply line from a main line. Standard screwed, for steam and water working pressure up to 150 pounds. Flat banded, right hand threads. Standard screwed, for steam and water working pressure up to 150 pounds. Flat banded, right hand threads.
Flair-It 26790 Flair-It Pex Polybutylene Adapter Genova 300 Contractor Pack Solvent Weld Pipe Adapter Flair-It 16799 Flair-It
For hot and cold water. Inserts into Polybutylene tubing allowing you to use PEX fittings with Polybutylene tubing.  3 Per Bag. Adapts pressure pipe to standard female pipe threads. Teflon thread tape is recommended for threaded joints. Conforms to ASTM D2466. For hot and cold water. 3/8" and 1/2" fits PEX or Polybutylene tubing only. 3/4" fits PEX tubing only, to use on Polybutylene use a PEX to Polybutylene transition fitting. Bar coded.
Epc 50155 Tube Cap Genova 50707CP CPVC Fittings Genova 300 Solvent Weld Pipe Reducing Adapter
Used to permanently or temporarily cap CPVC. Most often used in conjunction with short lengths of CPVC tubing to fabricate water hammer arrestors (air chambers) in the CPVC system. Bagged. SLIP X SLIP Used to change direction in piping. Adapts pressure pipe to standard female pipe threads. Reduces to smaller pipe size. Teflon thread tape is recommended for threaded joints. Conforms to ASTM D2466.
Flair-It 16840 Flair-It Genova 52905 CPVC Fitting Genova 53010 Genogrip CPVC Fittings
For hot and cold water. 3/8" and 1/2" fits PEX or Polybutylene tubing only. Bar coded. Used to change direction in piping from a fitting socket. Also used in conjunction with a conventional CPVC 90 degree elbow to fabricate a change of direction of piping at any angle. Solvent welds directly onto 1/2" CPVC tubing and adapts mechanically to 3/8" O.D. PEX tubing or copper tubing. Most often used to adapt from 1/2" CPVC tubing risers through floor to 3/8" O.D. closet or lavatory riser tubes. Can also be used with metal risers.
World Wide Sourcing 31-1-1/4G Galv. Pipe Fitting Genova Products 50175 CPVC Coupling American Valve P230 1/2 PVC Fitting
For steam and water working pressure up to 150 pounds. Squared head, right hand threads. Used to join straight lengths of CPVC tubing to smaller size tubing. AMERICAN Valve Pipe Tee, 1/2 in Nominal Size, Compression x Compression x NPT, 0.83 in Inside Dia, 1.85 in Outside Dia, 5 in Length, SCH 40, 150 psi at 73 deg F Working, PVC, 140 deg F
Flair-It 16862 Tube Plug Flair-It 16810 Flair-It Flair-It 16852 Flair-It
Used for inserting a plug into the end of a pipe. Bar coded. For hot and cold water. 3/8" and 1/2" fits PEX or Polybutylene tubing only. 3/4" fits PEX tubing only, to use on Polybutylene use a PEX to Polybutylene transition fitting. Bar coded. For hot and cold water. 3/8" and 1/2" fits PEX or Polybutylene tubing only. Bar coded.
Flair-It 16868 Flair-It Pex Polybutylene Adapter Flair-It 16815 Flair-It KBI Flo Control ProGuard Tube To Pipe Adapter
For hot and cold water. 3/8" and 1/2" fits PEX or Polybutylene tubing only. Bar coded. For hot and cold water. 3/8" and 1/2" fits PEX or Polybutylene tubing only. 3/4" fits PEX tubing only, to use on Polybutylene use a PEX to Polybutylene transition fitting. Bar coded. KBI Tube To Pipe Adapter, Series: Flo Control, ProGuard, 1/2 in Nominal, Compression X MIPT End, SCH 40 Wall Thickness, 150 psi Working, PVC, Gray, 73 deg F, 1-1/2 in Length X 1-1/2 in Width X 5 in Height, IAPMO Certified, NSF Approved, UPC Compliant, For Irrigation, Pool and Spa Industries
Genova 500 Pipe Reducing Bushing Genova 300 Contractor Pack Solvent Weld Pipe Adapter Genova 50405CP CPVC Fittings
Used to reduce from fitting socket to CPVC tubing. Bagged. Adapts pressure pipe to standard male pipe threads. Teflon thread tape is recommended for threaded joints. Conforms to ASTM D2466. Used to adapt to female metal threaded fittings in cold water applications only! Use Teflon tape to seal pipe threads. Do not use other materials or compounds unless specifically approved by manufacturer.
Flair-It 16853 Flair-It Flair-It 16847 Flair-It Flair-It 16863 Tube Plug
For hot and cold water. 3/8" and 1/2" fits PEX or Polybutylene tubing only. Bar coded. For hot and cold water. 3/8" and 1/2" fits PEX or Polybutylene tubing only. 3/4" fits PEX tubing only, to use on Polybutylene use a PEX to Polybutylene transition fitting. Bar coded. Used for inserting a plug into the end of a pipe. Bar coded.
Flair-It 16803 Flair-It Pex Polybutylene 90 Degree Elbow KBI TFS Pipe Transition Adapter Genova E30110C Solvent Weld Extended Pipe Coupling
For hot and cold water. 3/8" and 1/2" fits PEX or Polybutylene tubing only. 3/4" fits PEX tubing only, to use on Polybutylene use a PEX to Polybutylene transition fitting. Bar coded. Unique molded CPVC/Stainless Steel design with internal "knurl" and EPDM O'ring insures reliability and integrity. Large Stainless steel hex for easy connection to IPS sized pipe and fittings. Meets/exceeds ASTM and ANSI standards. Pressure rated to 100 psi at 180 degrees F. Made with EverTUFF CPVC and Type 304 Stainless Steel. Used to join lengths of pipe. Conforms to ASTM D2466.
Genova 300 Solvent Weld Pipe Adapter Genova 300 Solvent Weld Pipe Adapter Flair-It 16858 Flair-It Pex Polybutylene Adapter
Adapts pressure pipe to standard male pipe threads. Teflon thread tape is recommended for threaded joints. Conforms to ASTM D2466. Adapts pressure pipe to standard female pipe threads. Teflon thread tape is recommended for threaded joints. Conforms to ASTM D2466. For hot and cold water. 3/8" and 1/2" fits PEX or Polybutylene tubing only. 3/4" fits PEX tubing only, to use on Polybutylene use a PEX to Polybutylene transition fitting. Bar coded.
World Wide Sourcing 31-1-1/2G Galvanized Malleable Plug Flair-It 16850 Flair-It Flair-It 16848 Flair-It Pex Polybutylene Adapter
For steam and water working pressure up to 150 pounds. Squared head, right hand threads. For hot and cold water. 3/8" and 1/2" fits PEX or Polybutylene tubing only. Bar coded. For hot and cold water. 3/8" and 1/2" fits PEX or Polybutylene tubing only. Bar coded.
Plumb Pak PP820-80 Pop-Up Stopper Flair-It 16873 Swivel Nut Coupling American Valve P230 3/4 PVC Fitting
Plumb Pak Pop-Up Stopper, Suitable For Use With: All Plumb Pak Pop-Up Assembly, 1-1/4 X 1-1/4 in, Chrome Plated For hot and cold water. Transition from 3/4" PEX to 3/4" Polybutylene. Bar coded. AMERICAN Valve Pipe Tee, 3/4 in Nominal Size, Compression x Compression x NPT, 1.04 in Inside Dia, 2.05 in Outside Dia, 5.2 in Length, SCH 40, 150 psi at 73 deg F Working, PVC, 140 deg F
Drano 116 Drain Opener Flair-It 16802 Flair-It KBI TMS-0500 Pipe to Tube Adapter
Breaks down clogs on contact. Clogs are minimized or dissolved after 15 to 30 minutes. Contains a special ingredient to protect pipes from corrosion. Safe for plastic, PVC, metal pipes, garbage disposals and septic systems. For hot and cold water. 1/2" fits PEX or Polybutylene tubing only. Bar coded. Unique molded CPVC/Stainless Steel design with internal "knurl" and EPDM O'ring insures reliability and integrity. Large Stainless steel hex for easy connection to IPS sized pipe and fittings. Meets/exceeds ASTM and ANSI standards. Pressure rated to 100 psi at 180 degrees F. Made with EverTUFF CPVC and Type 304 stainless steel.
B and K 160-603 Pipe Repair Clamps Genova 53070 Genogrip CPVC  Red Street Adapter KBI Flo Control ProGuard Tube To Pipe Adapter
Provides positive seal on leaking pipes, type 430 stainless steel, max operating temperature  - 167 degrees F. Rated up to 150 PSI. Allows any fitting hub to be reduced to accept PEX, copper or CPVC tubing KBI Tube To Pipe Adapter, Series: Flo Control, ProGuard, 3/4 in Nominal, Compression X MIPT End, SCH 40 Wall Thickness, 150 psi Working, PVC, Gray, 73 deg F, 2-1/2 in Length X 2-1/2 in Width X 5 in Height, IAPMO Certified, NSF Approved, UPC Compliant, For Irrigation, Pool and Spa Industries
B and K Industries 160-602 Pipe Repair Clamp STOPPER POP-UP UNIV CHROME    Genova 300 Solvent Weld Pipe Coupling
Provides positive seal on leaking pipes, type 430 stainless steel, max operating temperature  - 167 degrees F. Rated up to 150 PSI. Constructed of plastic for long-lasting durability. Universal design replaces most stoppers. Measures 5-3/8"  long with an outside diameter of 1-5/16" at the top. Fits lavatory sinks. Used to join lengths of pipe. Conforms to ASTM D2466.
Genova 500 Solvent Weld Joints Pipe Union With Metal Bracket Flair-It 16820 Flair-It Flair-It 16874 Swivel Nut Coupling
Solvent welds directly to CPVC tubing and provides a method for future disassembly of tubing without cutting. For hot and cold water. 3/8" and 1/2" fits PEX or Polybutylene tubing only. 3/4" fits PEX tubing only, to use on Polybutylene use a PEX to Polybutylene transition fitting. Bar coded. For hot and cold water. Transition from 3/4" PEX to 3/4" Polybutylene. Bar coded.
Flair-It 16861 Tube Cap Flair-It 16845 Flair-It Pex Polybutylene Coupling Flair-It 16816 Flair-It Pex Polybutylene 90 Degree Swivel Elbow
Used for capping off PEX fittings. Bar coded. For hot and cold water. 3/8" and 1/2" fits PEX or Polybutylene tubing only. Bar coded. For hot and cold water. 3/8" and 1/2" fits PEX or Polybutylene tubing only. Bar coded.
World Wide Sourcing PPG121-6 Galvanized 45 Deg Elbow Genova Genogrip 500 Angle Tube Adapter Genova Products 50705 CPVC 90 Degree Elbow
Standard screwed, for steam and water working pressure up to 150 pounds. Flat banded, right hand threads. Solvent welds directly onto 1/2" CPVC tubing and adapts mechanically to 3/8" OD Pex or copper tubing. Most often used to adapt from 1/2" CPVC tubing risers through the wall to 3/8" OD closet and/or lavatory riser tubes. Can also be used with metal risers. SLIP X SLIP Used to change direction in piping.
Plumb Pak PP820-80PB Pop-Up Stopper World Wide Sourcing 4-1G Galvanized 45 Deg Elbow B and K 160-604 Pipe Repair Clamps
Plumb Pak Pop-Up Stopper, Suitable For Use With: All Plumb Pak Pop-Up Assembly, 1-1/4 X 1-1/4 in, Polished Brass Standard screwed, for steam and water working pressure up to 150 pounds. Flat banded, right hand threads. Provides positive seal on leaking pipes, type 430 stainless steel, max operating temperature  - 167 degrees F. Rated up to 150 PSI.
Epc 500 Tube Cap Genova 300 Contractor Pack Solvent Weld Pipe Adapter Flair-It 16846 Flair-It Pex Polybutylene Coupling
Used to permanently or temporarily cap CPVC. Most often used in conjunction with short lengths of CPVC tubing to fabricate water hammer arrestors (air chambers) in the CPVC system. Bagged. Adapts pressure pipe to standard male pipe threads. Teflon thread tape is recommended for threaded joints. Conforms to ASTM D2466. For hot and cold water. 3/8" and 1/2" fits PEX or Polybutylene tubing only. Bar coded.
KBI DE-0500-S Pipe Elbow NDS CPT-0500-S PVC Compression Run Tees KBI Flo Control ProGuard Tube To Pipe Adapter
90 degree elbow. CPVC/304 stainless steel technology with internal "knurl" and EDM. O'ring insuring reliability and integrity. Meets/exceeds all ASTM and ANSI standards. Made with Ever TUFF CPVC. Working temperature max., 140 degrees F. at 66 PSI. Working pressure 150 PSI at 70 degrees F. Complies with all applicable ASTM and ANSI standards. KBI Tube To Pipe Adapter, Series: Flo Control, ProGuard, 1 in Nominal, Compression X MIPT End, SCH 40 Wall Thickness, 150 psi Working, PVC, Gray, 73 deg F, 5-1/2 in Length X 5-1/2 in Width X 3 in Height, IAPMO Certified, NSF Approved, UPC Compliant, For Irrigation, Pool and Spa Industries
NDS CPT-0500-T PVC Compression Run Tees World Wide Sourcing 7-3/4G Galvanized 45 Deg St Elbow Flair-It 16831 Flair-It Pex Polybutylene Tee 3/8 x 3/8 x 3/8 Comp
NDS Pipe Tee, 1/2 in Nominal Size, Compression x Threaded, 0.86 in Inside Dia, 1.81 in Outside Dia, 5 in Length, SCH 40, 150 psi at 72 deg F Working, PVC, White, NSF Listed, ANSI Specified Standard screwed, for steam and water working pressure up to 150 pounds. Flat banded, right hand threads. For hot and cold water. 3/8" and 1/2" fits PEX or Polybutylene tubing only. 3/4" fits PEX tubing only, to use on Polybutylene use a PEX to Polybutylene transition fitting. Bar coded.
KBI TFS Pipe Transition Adapter KBI TMS-0750 Pipe to Tube Adapter Flair-It 16864 Tube Plug
Unique molded CPVC/Stainless Steel design with internal "knurl" and EPDM O'ring insures reliability and integrity. Large Stainless steel hex for easy connection to IPS sized pipe and fittings. Meets/exceeds ASTM and ANSI standards. Pressure rated to 100 psi at 180 degrees F. Made with EverTUFF CPVC and Type 304 Stainless Steel. Unique molded CPVC/Stainless Steel design with internal "knurl" and EPDM O'ring insures reliability and integrity. Large Stainless steel hex for easy connection to IPS sized pipe and fittings. Meets/exceeds ASTM and ANSI standards. Pressure rated to 100 psi at 180 degrees F. Made with EverTUFF CPVC and Type 304 stainless steel. Used for inserting a plug into the end of a pipe. Bar coded.
Flair-It 16844 Transition Coupling Flair-It 16809 Flair-It B and K 160-605 Pipe Repair Clamps
For hot and cold water. Transition from 3/4" PEX to 3/4" Polybutylene. Bar coded. For hot and cold water. 3/8" and 1/2" fits PEX or Polybutylene tubing only. 3/4" fits PEX tubing only, to use on Polybutylene use a PEX to Polybutylene transition fitting. Bar coded. Provides positive seal on leaking pipes, type 430 stainless steel, max operating temperature  - 167 degrees F. Rated up to 150 PSI.
Plumb Pak PP820-71 Pop-Up Plunger Genova Products 50407 CPVC Male Adapter Flair-It 16817 Flair-It Pex Polybutylene 90 Degree Swivel Elbow
Fits Price Pfister pop-up. Used to adapt to female metal threaded fittings in cold water applications only! Use Teflon tape to seal pipe threads. Do not use other materials or compounds unless specifically approved by manufacturer. For hot and cold water. 3/8" and 1/2" fits PEX or Polybutylene tubing only. Bar coded.
Flair-It 16865 Swivel Tube Adapter Genova 50407CP CPVC Fittings World Wide Sourcing 31-2G Galv. Pipe Fitting
Toilet connection to PEX connection. Bar coded. Used to adapt to female metal threaded fittings in cold water applications only! Use Teflon tape to seal pipe threads. Do not use other materials or compounds unless specifically approved by manufacturer. For steam and water working pressure up to 150 pounds. Squared head, right hand threads.
Genova 300 Solvent Weld Pipe Adapter World Wide Sourcing 24313-3L Lavatory Pop-Up Assembly Flair-It 16806 Flair-It Pex Polybutylene 90 Degree Elbow
Adapts pressure pipe to standard male pipe threads. Teflon thread tape is recommended for threaded joints. Conforms to ASTM D2466. Durable plastic body. Chrome plated trim. For hot and cold water. 3/8" and 1/2" fits PEX or Polybutylene tubing only. 3/4" fits PEX tubing only, to use on Polybutylene use a PEX to Polybutylene transition fitting. Bar coded.
Flair-It? 16871 Tube to Pipe Adapter Genova Products 50105 CPVC Coupling Genova 500 Solvent Weld Joints Transition Union
Used for connecting icemaker fittings to PEX or Polybutylene tubing. Bar coded. Used to join straight lengths of CPVC tubing. Designed to compensate for the difference in coefficients of expansion which exist between CPVC and metal pipe in hot water applications. Solvent welds directly to CPVC tube and adapts to standard male pipe threads. Use Teflon tape to seal pipe threads, do not use other materials or compounds unless approved by manufacturer.
STOPPER POP-UP REPLC CHROME   Liquid Plumr Strength-Pro Professional Strength Drain Opener Liquid-Plumr Foaming Pipe Snake 00216 Clog Remover
Plastic construction pop-up drain. Designed for use in Price Pfister lavatory sinks series 41, 43, and 49. 3-5/8 H x 1-1/4? outer diameter. Chrome finish. Works fast to clear fully clogged drains with standing water and slow drains. Gel penetrates and dissolves clogs. Removes hair, gunk, grease, & soap scum. Safe for all pipes (PVC, plastic, copper, old pipes), septic systems and garbage disposals. Two powerful liquids activate on contact to form a deep cleaning foam. Works fast to dissolve hair and gunk. Penetrates deep into pipe to find clog. Safe for all pipes (PVC, plastic, copper, old pipes), septic systems and garbage disposals.
Blow Out 30-475 Industrial Strength Drain Opener World Wide Sourcing PPG121-25 Galvanized 45 Deg St Elbow Flair-It 16826 Flair-It Pex Polybutylene Tee3/4 x 3/4 x 1/2 Comp
Biodegradeable and environmentally safe, dissolves hair, grease, soap and other organic materials. Standard screwed, for steam and water working pressure up to 150 pounds. Flat banded, right hand threads. For hot and cold water. 3/8" and 1/2" fits PEX or Polybutylene tubing only. 3/4" fits PEX tubing only, to use on Polybutylene use a PEX to Polybutylene transition fitting. Bar coded.
Genova Products 50107 CPVC Coupling Genova 530751 Genogrip Genova 53085 Genogrip CPVC Fittings
Used to join straight lengths of CPVC tubing. These patented adapters solvent weld directly into standard fittings and adapt mechanically to both PEX tubing and copper tubing by utilizing a special metal gripper ring supplied with the fitting. These fittings can be used in conjunction with CPVC fittings to create an unlimited range of fittings to connect to any type of water supply tubing. These patented adapters solvent weld directly into standard fittings and adapt mechanically to both PEX tubing and copper tubing by utilizing a special metal gripper ring supplied with the fitting. These fittings can be used in conjunction with CPVC fittings to create an unlimited range of fittings to connect to any type of water supply tubing.
Plumb Pak PP820-73 Pop-Up Center Rod Assembly Genova 300 Solvent Weld Pipe Adapter Genova 51407CP CPVC Fittings
Center rod assembly. For Price Pfister and other pop-ups. Adapts pressure pipe to standard female pipe threads. Teflon thread tape is recommended for threaded joints. Conforms to ASTM D2466. Used to provide a branch supply line from a main line.
POP-UP ROD 10IN ASSEMBLY      Drano 22118 Max Clog Remover Flair-It 16805 Flair-It
10". Fits Price Pfister Lavatory faucets. Replaces Price Pfister Part no. 941-672. Connects to lift rod extension. Does NOT include nut and clip. Formulated thick to dissolve the toughest clogs fast. Pours through water straight to the clog. Has a special ingredient to protect pipes from corrosion. Safe for plastic, PVC, metal pipes, garbage disposals, and septic systems. Won't harm pipes when used overnight. For hot and cold water. 3/8" and 1/2" fits PEX or Polybutylene tubing only. 3/4" fits PEX tubing only, to use on Polybutylene use a PEX to Polybutylene transition fitting. Bar coded.
Genova 500 Solvent Weld Joints Pipe Union Drano Dual Force 14768 Professional Strength Foamer Clog Remover NDS CPT-0750-S PVC Compression Run Tees
Solvent welds directly to CPVC tubing and provides a method for future disassembly of tubing without cutting. Deep-cleaning foam purges pipe walls of hair and gunk and attacks places ordinary liquids can't reach. It's also safe for all pipes and septic systems. Working temperature max., 140 degrees F. at 66 PSI. Working pressure 150 PSI at 70 degrees F. Complies with all applicable ASTM and ANSI standards.
NDS CPT-0750-T PVC Compression Run Tees Genova 500 Solvent Weld Joints Transition Union Liquid Plumr Snake Plus Professional Strength Drain Opener
NDS Pipe Tee, 3/4 in Nominal Size, Compression x Threaded, 1.09 in Inside Dia, 2.01 in Outside Dia, 5-3/8 in Length, SCH 40, 150 psi at 72 deg F Working, PVC, White, NSF Listed, ANSI Specified Designed to compensate for the difference in coefficients of expansion which exist between CPVC and metal pipe in hot water applications. Solvent welds directly to CPVC tube and adapts to standard female pipe threads. Use Teflon tape to see pipe threads, do not use other materials or compounds unless approved by the manufacturer. Combines the strength of Liquid Plumr Gel with convenience of the snake for tough clogs. 18 oz gel.
Genova 300 Solvent Weld Pipe Coupling B and K 160-606 Pipe Repair Clamps Genova Products 50405 CPVC Male Adapter
Used to join lengths of pipe. Conforms to ASTM D2466. Provides positive seal on leaking pipes, type 430 stainless steel, max operating temperature  - 167 degrees F. Rated up to 150 PSI. Used to adapt to female metal threaded fittings in cold water applications only! Use Teflon tape to seal pipe threads. Do not use other materials or compounds unless specifically approved by manufacturer.
Plumb Pak PP840-1 Pipe Repair Clamps Flair-It 16869 Swivel Tube Adapter Genova 500 Transition Union
Adjustable to 3/8"-3/4" I.P.S., 1/2" - 1" copper. Includes nuts, bolts, and gasket. Toilet connection to PEX connection. Bar coded. Designed to compensate for the difference in coefficients of expansion which exist between CPVC and metal pipe in hot water applications. Solvent welds directly to CPVC tube and adapts to standard male pipe threads. Use Teflon tape to seal pipe threads, do not use other materials or compounds unless approved by manufacturer.
World Wide Sourcing 4-1-1/4G Galvanized 45 Deg Elbow B and K 160-608 Pipe Repair Clamps Genova 52907 CPVC Fitting
Standard screwed, for steam and water working pressure up to 150 pounds. Flat banded, right hand threads. Provides positive seal on leaking pipes, type 430 stainless steel, max operating temperature  - 167 degrees F. Rated up to 150 PSI. Used to change direction in piping from a fitting socket. Also used in conjunction with a conventional CPVC 90 degree elbow to fabricate a change of direction of piping at any angle.
American Valve P230 1 PVC Fitting Plumb Pak PP820-72 Pop-Up Rod and Strap Flair-It 16834 Flair-It Pex Polybutylene 1/2 x 1/2 x 1/8 In
AMERICAN Valve Pipe Tee, 1 in Nominal Size, Compression x Compression x NPT, 1.31 in Inside Dia, 2.4 in Outside Dia, 5.65 in Length, SCH 40, 150 psi at 73 deg F Working, PVC, 140 deg F Sink drain rod and strap. Fits most plungers including Price Pfister pop-up. Used to connect icemaker fittings to PEX or Polybutylene tubing. Bar coded.
Flair-It 16343 Transition Coupling B and K 160-607 Pipe Repair Clamps Flair-It 16827 Flair-It Pex Polybutylene Tee 3/4 x 3/4 x 3/4 Comp
Couplings fit copper, PEX, Polybutylene or CPVC. Provides positive seal on leaking pipes, type 430 stainless steel, max operating temperature  - 167 degrees F. Rated up to 150 PSI. For hot and cold water. 3/8" and 1/2" fits PEX or Polybutylene tubing only. 3/4" fits PEX tubing only, to use on Polybutylene use a PEX to Polybutylene transition fitting. Bar coded.
Flair-It 16825 Flair-It Pex Polybutylene Tee 3/4 x 1/2 x 3/4 Comp PULL ROD ASSEMBLY UNIV BATH   STOPPER POP-UP BATH CHROME
For hot and cold water. 3/8" and 1/2" fits PEX or Polybutylene tubing only. 3/4" fits PEX tubing only, to use on Polybutylene use a PEX to Polybutylene transition fitting. Bar coded. Metal construction. Chrome finish. For use with lavatory pop-up assemblies. Includes 12" rod and extension. Plastic. 4-1/2" height, 1-3/8" outside diameter top. Fits lavatory sinks. Pop-up.
NDS CPT-1000-S PVC Compression Run Tees NDS CPT-1000-T PVC Compression Run Tees Drano Snake Plus 70241 Drain Cleaner
Working temperature max., 140 degrees F. at 66 PSI. Working pressure 150 PSI at 70 degrees F. Complies with all applicable ASTM and ANSI standards. NDS Pipe Tee, 1 in Nominal Size, Compression x Threaded, 1.31 in Inside Dia, 2.27 in Outside Dia, 5-5/8 in Length, SCH 40, 150 psi at 72 deg F Working, PVC, White, NSF Listed, ANSI Specified 18" snake bends safely through your pipes, and the thick clog-busting formula has a special ingredient to protect pipes from corrosion. Safe for plastic, PVC, metal pipes, garbage disposals and septic systems.
Genova Products 50605 CPVC 45 Degree Elbow Genova Products 51405 CPVC Tee BALL ROD POP-UP BATH 6IN PFIST
Used to change direction in piping. Sometimes used in conjunction with a 12"L CPVC tubing on long runs to absorb expansion. Bagged. Used to provide a branch supply line from a main line. Metal construction,.6-1/4" length. Replaces PP941-652. Chrome finish. Does NOT include nut and clip.
Genova 500 Solvent Weld Joints Transition Union Flair-It 16824 Flair-It Pex Polybutylene Tee 3/4 x 1/2 x 1/2 Comp Flair-It 16830 Flair-It
Used to transition from copper or brass tube to CPVC. Permits easy disassembly of piping system. Remove CPVC component and gasket before making sweat connection. For hot and cold water. 3/8" and 1/2" fits PEX or Polybutylene tubing only. 3/4" fits PEX tubing only, to use on Polybutylene use a PEX to Polybutylene transition fitting. Bar coded. For hot and cold water. 3/8" and 1/2" fits PEX or Polybutylene tubing only. 3/4" fits PEX tubing only, to use on Polybutylene use a PEX to Polybutylene transition fitting. Bar coded.
Pure Lye 30-500 Drain Opener B and K 160-703 Pipe Repair Clamps KBI TPC-0500 Pipe to Tube Adapter
Super pure, bead size drain opener. Industrial strength, biodegradable, clears out drains, grease traps, septic systems, roots. Odorless non-acid formula is safe on fine fixtures, chrome trim and plastic pipes. Provides positive seal on leaking pipes, type 430 stainless steel, max operating temperature  - 167 degrees F. Rated up to 150 PSI. Molded CPVC/stainless steel design with internal "knurl" and EPDM O-ring insures reliability and integrity. Meets/exceeds ASTM and ANSI standards. Made with EverTUFF CPVC and Type 304 stainless steel. Pressure rated to 100 PSI at 180 degrees F.
STOPPER P-UP BTRM FOR/MOEN CHM B and K 160-704 Pipe Repair Clamps DRAIN CLEANER GEL 80OZ
Plastic construction. Chrome finish. Used with Moen drain components. Provides positive seal on leaking pipes, type 430 stainless steel, max operating temperature  - 167 degrees F. Rated up to 150 PSI. Formulated thick to dissolve the toughest clogs fast. Pours through water straight to the clog. Has a special ingredient to protect pipes from corrosion. Safe for plastic, PVC, metal pipes, garbage disposals, and septic systems. Won't harm pipes when used overnight.
Genova 300 Solvent Weld Pipe Adapter Genova 500 Solvent Weld Joints Transition Union World Wide Sourcing 4-1-1/2G Galvanized 45 Deg Elbow
Adapts pressure pipe to standard female pipe threads. Teflon thread tape is recommended for threaded joints. Conforms to ASTM D2466. Designed to compensate for the difference in coefficients of expansion which exist between CPVC and metal pipe in hot water applications. Solvent welds directly to CPVC tube and adapts to standard female pipe threads. Use Teflon tape to see pipe threads, do not use other materials or compounds unless approved by the manufacturer. Standard screwed, for steam and water working pressure up to 150 pounds. Flat banded, right hand threads.
GRANULES KITCHEN 17.64OZ      B K Industries 160-003HC Compression Couplings Crystal Heat ZUCRY2 Drain Opener
Drano Kitchen Granules formula melts grease and is the only product specifically designed for kitchen clogs. It is safe on all pipes. Simply pour it into the drain, follow with hot water and wait 15 minutes. Specifically designed to destroy tough, greasy kitchen clogs Hydroformed steel body, rubber compression gasket, and metal friction ring, rated up to 125 PSI at 210 degrees F., iron pipe size for piping or repairs on galvanized pipe. Works great on grease and other kitchen clogs, won't harm pipes, septic tanks or cesspools.
KBI Flo Control ProGuard Tube To Pipe Adapter Danco 88532 Ball Rod Assembly Genova 300 Solvent Weld Pipe Adapter
KBI Tube To Pipe Adapter, Series: Flo Control, ProGuard, 1-1/2 in Nominal, Compression X MIPT End, SCH 40 Wall Thickness, 150 psi Working, PVC, Gray, 73 deg F, 3 in Length X 1-3/4 in Width X 5-1/2 in Height, IAPMO Certified, NSF Approved, UPC Compliant, For Irrigation, Pool and Spa Industries 6" brass rod replaces most existing lavatory ball rod assemblies. Includes 1 rod, 3 various-sized balls, and 2 cone washers. Carded. Adapts pressure pipe to standard male pipe threads. Teflon thread tape is recommended for threaded joints. Conforms to ASTM D2466.
STOPPER POP-UP BATH BRSH NIC  Drain Care ZDC16 Build-Up Remover Genova 500 Transition Union
Plastic. 4-1/2" height, 1-3/8" outside diameter top. Fits lavatory sinks. Pop-up. Enzymatic drain cleaner ends slow drains. Safe for all plumbing. Cleans and removes years of build-up from plumbing systems. Used to transition from metal male pipe threads to CPVC. Permits easy disassembly of piping system.
Oatey 43789 Dwv Saddle Tee Kit World Wide Sourcing PPG121-32 Galvanized 45 Deg Elbow Genova 500 Solvent Weld Joints Transition Union
Complete with tee and U-bolts, nuts and washers. Available in two sizes which provide capability of tapping 1-1/2" or 2" DWV pipe to 3" or 4" existing schedule 40 DWV pipe.  3" x 2" and 4" x 2" spigots accept 1-1/2" schedule 40 DWV inside socket, joins to 2" with 2" couplings. Allows tapping of existing DWV lines without cutting pipe. Fits inside 2" DWV with couplings. Standard screwed, for steam and water working pressure up to 150 pounds. Flat banded, right hand threads. Used to transition from metal female pipe threads to CPVC. Permits easy disassembly of piping.
KBI TPC-0750 Pipe to Tube Adapter World Wide Sourcing 20906 Lavatory Pop-Up Assembly Genova Products 50475 CPVC Fittings
Molded CPVC/stainless steel design with internal "knurl" and EPDM O-ring insures reliability and integrity. Meets/exceeds ASTM and ANSI standards. Made with EverTUFF CPVC and Type 304 stainless steel. Pressure rated to 100 PSI at 180 degrees F. Durable plastic body. Brass lift rod. Polished brass trim. Polished brass finish. 1-1/4 Dia. Used to adapt to metal FIP threaded fittings to smaller pipe size in cold water applications only! Teflon thread tape is recommended for threaded joints. Boxed.
Genova 61231 Dwv Saddle Tee