Home > PLUMBING > ROUGH PLUMBING SUPPLIES > PIPE REPAIR > HOSE CLAMPS
Sort By:
1
Genova 300 Dome Shaped Top Pipe Cap Genova 300 Dome Shaped Top Pipe Cap Genova 300 Dome Shaped Top Pipe Cap
Used to cap pipe. Conforms to ASTM D2466. Used to cap pipe. Conforms to ASTM D2466. Used to cap pipe. Conforms to ASTM D2466.
Genova 300 Dome Shaped Top Pipe Cap Pro Bite 636-003HC/PB711R Push Fit Demount Clip Genova 300 Dome Shaped Top Pipe Cap
Used to cap threaded pipe. Adapts to standard male pipe threads. Teflon tape is recommended for threaded joints. Conforms to ASTM D2466. Removal tool. Used to cap pipe. Conforms to ASTM D2466.
Genova 300 Dome Shaped Top Pipe Cap Genova 300 Dome Shaped Top Pipe Cap Pro Bite 636-004HC/PB721R Push Fit Demount Clip
Used to cap pipe. Conforms to ASTM D2466. Used to cap threaded pipe. Adapts to standard male pipe threads. Teflon tape is recommended for threaded joints. Conforms to ASTM D2466. Removal tool.
Genova 300 Dome Shaped Top Pipe Cap Genova 300 Dome Shaped Top Pipe Cap Genova 300 Dome Shaped Top Pipe Cap
Used to cap threaded pipe. Adapts to standard male pipe threads. Teflon tape is recommended for threaded joints. Conforms to ASTM D2466. Used to cap threaded pipe. Adapts to standard male pipe threads. Teflon tape is recommended for threaded joints. Conforms to ASTM D2466. Used to cap threaded pipe. Adapts to standard male pipe threads. Teflon tape is recommended for threaded joints. Conforms to ASTM D2466.
Genova 300 Dome Shaped Top Pipe Cap Oatey 43561 Snap-In Floor Drain Cash Acme U712A Disconnect Clip
Used to cap pipe. Conforms to ASTM D2466. Designed for drainage in areas where waterproofing membrane is not required.  Plastic Snap-In Drain can be solvent welded or inserted into Sch. 40 DWV pipe.  One piece design does not allow for removal of the cover. For quick and easy disassembly of the SharkBite Push-Fit Fittings.
Cash Acme U710A Disconnect Clip Cash Acme U714A Disconnect Clip Genova 300 Dome Shaped Top Pipe Cap
For quick and easy disassembly of the SharkBite Push-Fit Fittings. For quick and easy disassembly of the SharkBite Push-Fit Fittings. Used to cap threaded pipe. Adapts to standard male pipe threads. Teflon tape is recommended for threaded joints. Conforms to ASTM D2466.
Cash Acme U708A Disconnect Clip Cash Acme U706A Disconnect Clip Oatey 43560 Snap-In Drain
For quick and easy disassembly of the SharkBite Push-Fit Fittings. For quick and easy disassembly of the SharkBite Push-Fit Fittings. Designed for drainage in areas where waterproofing membrane is not required.  Plastic Snap-In Drain can be solvent welded or inserted into Sch. 40 DWV pipe.  One piece design does not allow for removal of the cover.
World Wide Sourcing PPG90R-10X8 Galv Pipe Fitting Oatey 42757 Condensate P-Trap STEM MALE 1/2IN CTS X1/2IN MPT
WORLDWIDE SOURCING Pipe Reducing Elbow, 3/8 x 1/4 in Nominal Size, Threaded, 90 deg, Malleable Iron, Galvanized One-piece design. Made from 3/4" PVC Schedule 40 DWV pipe. Plastic male stem fitting for point of use low pressure applications. It is designed and manufactured for many years of trouble free service. Produced of off-white polypropylene, a high performance thermoplastic material, the design allows for quick and easy connections without the use of installation tools.
Oatey 42021 Replacement Round Snap-Tite Strainer World Wide Sourcing 2B-1/2X3/8G Galvanized 90 Degree Elbow CLIP DISCONNECT W/GAUGE 1/2PVC
6-3/4" white plastic replacement strainer. Screws included.Carded. WORLDWIDE SOURCING Pipe Elbow, 1/2 x 3/8 in Nominal Size, Threaded, 90 deg, Malleable Iron, Galvanized The SharkBite PVC IPS (Iron Pipe Size) disconnect clip can be used the release a SharkBite PVC IPS Fitting from Sch. 40, 80, 120 PVC Pipe. The PVC Disconnect Clip will release the fitting on the white collar of the fitting. The PVC Disconnect Clip also serves as a safe seal depth gauge to mark the PVC Pipe to ensure the fitting has been inserted to the proper depth.
CLIP DISCONNECT W/GAUGE 3/4PVC CLIP DISCONNECT W/GAUGE 1 PVC Oatey 42758 Condensate Running Trap
The SharkBite PVC IPS (Iron Pipe Size) disconnect clip can be used the release a SharkBite PVC IPS Fitting from Sch. 40, 80, 120 PVC Pipe. The PVC Disconnect Clip will release the fitting on the white collar of the fitting. The PVC Disconnect Clip also serves as a safe seal depth gauge to mark the PVC Pipe to ensure the fitting has been inserted to the proper depth. The SharkBite PVC IPS (Iron Pipe Size) disconnect clip can be used the release a SharkBite PVC IPS Fitting from Sch. 40, 80, 120 PVC Pipe. The PVC Disconnect Clip will release the fitting on the white collar of the fitting. The PVC Disconnect Clip also serves as a safe seal depth gauge to mark the PVC Pipe to ensure the fitting has been inserted to the proper depth. One-piece design. Made from 3/4" PVC Schedule 40 DWV pipe
World Wide Sourcing PPG90R-20X10 Galv Pipe Fitting Elkhart CopperLoc Push-Fit Tube Adapter STEM FEMALE 1/2CTS X 1/2FPT
WORLDWIDE SOURCING Pipe Reducing Elbow, 3/4 x 3/8 in Nominal Size, Threaded, 90 deg, Malleable Iron, Galvanized Copper and copper alloy push connect fittings provide plumbing system design flexibility by allowing you to join copper, CPVC, or PEX lines with just one fitting. Push fit, tool free, permanent fitting. pre-lubed for quick installation, approved for underground installations. Bagged. Plastic female stem fitting is ASSE 1061 certified for domestic plumbing service. It is designed and manufactured for many years of trouble free service. Produced of off-white Polysulfone, a high performance thermal plastic material, the design allows for quick and easy connections without the use of installation tools.
Oatey 43565 Snap-In Floor Drain World Wide Sourcing 2B-3/4X1/2G Galvanized 90 Degree Elbow Watts P-670 End Cap
Designed for drainage in areas where waterproofing membrane is not required.  Plastic Snap-In Drain can be solvent welded or inserted into Sch. 40 DWV pipe.  One piece design does not allow for removal of the cover. WORLDWIDE SOURCING Pipe Reducing Elbow, 3/4 x 1/2 in Nominal Size, Threaded, 90 deg, Malleable Iron, Galvanized Works with copper, CPVC, Pex, LPDE, MPDE, HDPE and polybutylene tubing in hot and cold water applications. Incorporates stainless steel gripping teeth in the collets, allowing the connectors to interconnect with multiple materials without special tools or tube inserts. Exclusive O-ring guide insures zero-leak connections. Tube orientation can be changed by a simple twist, reducing the amount of tubing required to plumb a water system. Reusable, approved for use behind walls and underground.
Oatey 43569 Snap-In Floor Drain Watts P-606 Push Connect Fittings Elkhart CopperLoc Push-Fit Tube Adapter
Designed for drainage in areas where waterproofing membrane is not required.  Plastic Snap-In Drain can be solvent welded or inserted into Sch. 40 DWV pipe.  One piece design does not allow for removal of the cover. Works with copper, CPVC, PEX, LPDE, MPDE, HDPE and polybutylene tubing in hot and cold water applications. Incorporates stainless steel gripping teeth in the collets, allowing the connectors to interconnect with multiple materials without special tools or tube inserts. Exclusive O-ring guide insures zero-leak connections. Tube orientation can be changed by a simple twist, reducing the amount of tubing required to plumb a water system. Reusable, approved for use behind walls and underground. Polybagged Copper and copper alloy push connect fittings provide plumbing system design flexibility by allowing you to join copper, CPVC, or PEX lines with just one fitting. Push fit, tool free, permanent fitting. pre-lubed for quick installation, approved for underground installations.
Genova 300 Dome Shaped Top Pipe Cap Watts P-412 Push-Fit Tube To Pipe Adapter Watts P-1019 Push Connect Fitting
Used to cap pipe. Conforms to ASTM D2466. Works with copper, CPVC, PEX, LPDE, MPDE, HDPE and polybutylene tubing in hot and cold water applications. Incorporates stainless steel gripping teeth in the collets, allowing the connectors to interconnect with multiple materials without special tools or tube inserts. Exclusive O-ring guide insures zero-leak connections. Tube orientation can be changed by a simple twist, reducing the amount of tubing required to plumb a water system. Reusable, approved for use behind walls and underground. Polybagged. Works with copper, CPVC, PEX, LPDE, MPDE, HDPE and polybutylene tubing in hot and cold water applications. Incorporates stainless steel gripping teeth in the collets, allowing the connectors to interconnect with multiple materials without special tools or tube inserts. Exclusive O-ring guide insures zero-leak connections. Tube orientation can be changed by a simple twist, reducing the amount of tubing required to plumb a water system. Reusable, approved for use behind walls and underground. Polybagged
CONNECTOR 1/4OD X 1/4FP       American Valve P230 1/2 PVC Fitting KBI Flo Control ProGuard Tube To Pipe Adapter
Incorporates stainless steel gripping teeth in the collets. These corrosion resistant teeth allow the connectors to interconnect with multiple materials without the need for special tools or tube inserts. It works with copper, CPVC, pex, LPDE, MPDE, HDPE and polybutylene tubing. AMERICAN Valve Pipe Tee, 1/2 in Nominal Size, Compression x Compression x NPT, 0.83 in Inside Dia, 1.85 in Outside Dia, 5 in Length, SCH 40, 150 psi at 73 deg F Working, PVC, 140 deg F KBI Tube To Pipe Adapter, Series: Flo Control, ProGuard, 1/2 in Nominal, Compression X MIPT End, SCH 40 Wall Thickness, 150 psi Working, PVC, Gray, 73 deg F, 1-1/2 in Length X 1-1/2 in Width X 5 in Height, IAPMO Certified, NSF Approved, UPC Compliant, For Irrigation, Pool and Spa Industries
CopperLoc 10170885 Tube Cap Watts PL-3006 Push-Fit Tube To Pipe Adapter Watts P-610 Push-Fit Tube To Pipe Adapter
Copper and copper alloy push connect fitting. Push fit, tool free, permanent fitting. pre-lubed for quick installation, approved for underground installations. Plastic quick connect fittings are made from polysulfone, a high performance thermal plastic material. Design allows for quick and easy connections to pipe without installation tool. Use on copper, pex, CPVC and polybutylene pipe. Product meets all National Plumbing Codes. Works with copper, CPVC, PEX, LPDE, MPDE, HDPE and polybutylene tubing in hot and cold water applications. Incorporates stainless steel gripping teeth in the collets, allowing the connectors to interconnect with multiple materials without special tools or tube inserts. Exclusive O-ring guide insures zero-leak connections. Tube orientation can be changed by a simple twist, reducing the amount of tubing required to plumb a water system. Reusable, approved for use behind walls and underground. Polybagged.
Watts P-806 Push Connect Fittings CopperLoc 900 Non-Removable Push-Fit Tube Coupling With Stop Watts P Stackable Tube Elbow
Works with copper, CPVC, PEX, LPDE, MPDE, HDPE and polybutylene tubing in hot and cold water applications. Incorporates stainless steel gripping teeth in the collets, allowing the connectors to interconnect with multiple materials without special tools or tube inserts. Exclusive O-ring guide insures zero-leak connections. Tube orientation can be changed by a simple twist, reducing the amount of tubing required to plumb a water system. Reusable, approved for use behind walls and underground. Polybagged Copper and copper alloy push connect fittings provide plumbing system design flexibility by allowing you to join copper, CPVC, or PEX lines with just one fitting. Push fit, tool free, permanent fitting. pre-lubed for quick installation, approved for underground installations. Bagged. Works with copper, CPVC, Pex, LPDE, MPDE, HDPE and polybutylene tubing in hot and cold water applications. Incorporates stainless steel gripping teeth in the collets, allowing the connectors to interconnect with multiple materials without special tools or tube inserts. Exclusive O-ring guide insures zero-leak connections. Tube orientation can be changed by a simple twist, reducing the amount of tubing required to plumb a water system. Reusable, approved for use behind walls and underground.
Watts PL-3024 Push-Fit Tube To Pipe Adapter CopperLoc 907 Non-Removable Tube Elbow CopperLoc 906 Non-Removable Tube Elbow
Plastic quick connect fittings are made from polysulfone, a high performance thermal plastic material. Design allows for quick and easy connections to pipe without installation tool. Use on copper, pex, CPVC and polybutylene pipe. Product meets all National Plumbing Codes. Copper and copper alloy push connect fittings provide plumbing system design flexibility by allowing you to join copper, CPVC, or PEX lines with just one fitting. Push fit, tool free, permanent fitting. pre-lubed for quick installation, approved for underground installations. Copper and copper alloy push connect fittings provide plumbing system design flexibility by allowing you to join copper, CPVC, or PEX lines with just one fitting. Push fit, tool free, permanent fitting. pre-lubed for quick installation, approved for underground installations. Bagged.
Watts P Tube Elbow Watt PL-3015 Coupling Union American Valve P230 3/4 PVC Fitting
Works with copper, CPVC, Pex, LPDE, MPDE, HDPE and polybutylene tubing in hot and cold water applications. Incorporates stainless steel gripping teeth in the collets, allowing the connectors to interconnect with multiple materials without special tools or tube inserts. Exclusive O-ring guide insures zero-leak connections. Tube orientation can be changed by a simple twist, reducing the amount of tubing required to plumb a water system. Reusable, approved for use behind walls and underground. 1/2" CTS x 1/2" NPT. Plastic quick connect fittings are made from polysulfone, a high performance thermal plastic material. Design allows for quick and easy connections to pipe without installation tool. Use on copper, pex, CPVC and polybutylene pipe. Product meets all National Plumbing Codes. AMERICAN Valve Pipe Tee, 3/4 in Nominal Size, Compression x Compression x NPT, 1.04 in Inside Dia, 2.05 in Outside Dia, 5.2 in Length, SCH 40, 150 psi at 73 deg F Working, PVC, 140 deg F
Watts PL-3005 Push-Fit Tube To Pipe Adapter Watts PL-3004 Push-Fit Tube To Pipe Adapter Watts PL Tube Elbow
Plastic quick connect fittings are made from polysulfone, a high performance thermal plastic material. Design allows for quick and easy connections to pipe without installation tool. Use on copper, pex, CPVC and polybutylene pipe. Product meets all National Plumbing Codes. Plastic quick connect fittings are made from polysulfone, a high performance thermal plastic material. Design allows for quick and easy connections to pipe without installation tool. Use on copper, pex, CPVC and polybutylene pipe. Product meets all National Plumbing Codes. Plastic quick connect fittings are made from polysulfone, a high performance thermal plastic material. Design allows for quick and easy connections to pipe without installation tool. Use on copper, pex, CPVC and polybutylene pipe. Product meets all National Plumbing Codes.
Watts PL Tube Elbow Watts PL-3026 Push-Fit Tube To Pipe Adapter Watts PL-3025 Push-Fit Tube To Pipe Adapter
Plastic quick connect fittings are made from polysulfone, a high performance thermal plastic material. Design allows for quick and easy connections to pipe without installation tool. Use on copper, pex, CPVC and polybutylene pipe. Product meets all National Plumbing Codes. Plastic quick connect fittings are made from polysulfone, a high performance thermal plastic material. Design allows for quick and easy connections to pipe without installation tool. Use on copper, pex, CPVC and polybutylene pipe. Product meets all National Plumbing Codes. Plastic quick connect fittings are made from polysulfone, a high performance thermal plastic material. Design allows for quick and easy connections to pipe without installation tool. Use on copper, pex, CPVC and polybutylene pipe. Product meets all National Plumbing Codes.
Watts PL-3027 Push-Fit Tube To Pipe Adapter KBI Flo Control ProGuard Tube To Pipe Adapter Watts PL Tube Elbow
Plastic quick connect fittings are made from polysulfone, a high performance thermal plastic material. Design allows for quick and easy connections to pipe without installation tool. Use on copper, pex, CPVC and polybutylene pipe. Product meets all National Plumbing Codes. KBI Tube To Pipe Adapter, Series: Flo Control, ProGuard, 3/4 in Nominal, Compression X MIPT End, SCH 40 Wall Thickness, 150 psi Working, PVC, Gray, 73 deg F, 2-1/2 in Length X 2-1/2 in Width X 5 in Height, IAPMO Certified, NSF Approved, UPC Compliant, For Irrigation, Pool and Spa Industries Plastic quick connect fittings are made from polysulfone, a high performance thermal plastic material. Design allows for quick and easy connections to pipe without installation tool. Use on copper, pex, CPVC and polybutylene pipe. Product meets all National Plumbing Codes.
Watt PL-3000 Quick Connect Coupling Union Watts PL-3007 Push-Fit Tube To Pipe Adapter Watts PL Tube Elbow
Plastic quick connect fittings are made from polysulfone, a high performance thermal plastic material. Design allows for quick and easy connections to pipe without installation tool. Use on copper, pex, CPVC and polybutylene pipe. Product meets all National Plumbing Codes. Plastic quick connect fittings are made from polysulfone, a high performance thermal plastic material. Design allows for quick and easy connections to pipe without installation tool. Use on copper, pex, CPVC and polybutylene pipe. Product meets all National Plumbing Codes. Plastic quick connect fittings are made from polysulfone, a high performance thermal plastic material. Design allows for quick and easy connections to pipe without installation tool. Use on copper, pex, CPVC and polybutylene pipe. Product meets all National Plumbing Codes.
Watts PL Tube Elbow END STOP 1/4IN OD             B and K Industries 510-803HN Galv Pipe
Plastic quick connect fittings are made from polysulfone, a high performance thermal plastic material. Design allows for quick and easy connections to pipe without installation tool. Use on copper, pex, CPVC and polybutylene pipe. Product meets all National Plumbing Codes. Connects to copper, CPVC, PEX, LPDE, MPDE, HDPE and polybutylene tubing. Meets the following specifications: Material: ANSI/ASTM A-197, Dimensions: ANSI/ASME B.16.3, Threads: ANSI B1.20.1.
Pro Bite 633-003HC/LF816R End Cap CONNECT 1/2CTS X 3/4MGHT      CopperLoc 900 Non-Removable Push-Fit Tube Coupling With Stop
Connects to copper, PEX or CPVC, no glue, soldering, crimping or special tools, approved for in-wall and underground burial, approved for potable water, radiant and hydronic heating, easily repositioned or removed. Incorporates stainless steel gripping teeth in the collets. These corrosion resistant teeth allow the connectors to interconnect with multiple materials without the need for special tools or tube inserts. It works with copper, CPVC, pex, LPDE, MPDE, HDPE and polybutylene tubing. Copper and copper alloy push connect fittings provide plumbing system design flexibility by allowing you to join copper, CPVC, or PEX lines with just one fitting. Push fit, tool free, permanent fitting. pre-lubed for quick installation, approved for underground installations. Bagged.
Watts P-613 Push-Fit Tube To Pipe Adapter Elkhart CopperLoc Push-Fit Tube Adapter Elkhart CopperLoc Push-Fit Tube Adapter
Works with copper, CPVC, PEX, LPDE, MPDE, HDPE and polybutylene tubing in hot and cold water applications. Incorporates stainless steel gripping teeth in the collets, allowing the connectors to interconnect with multiple materials without special tools or tube inserts. Exclusive O-ring guide insures zero-leak connections. Tube orientation can be changed by a simple twist, reducing the amount of tubing required to plumb a water system. Reusable, approved for use behind walls and underground. Polybagged. Copper and copper alloy push connect fittings provide plumbing system design flexibility by allowing you to join copper, CPVC, or PEX lines with just one fitting. Push fit, tool free, permanent fitting. pre-lubed for quick installation, approved for underground installations. Copper and copper alloy push connect fittings provide plumbing system design flexibility by allowing you to join copper, CPVC, or PEX lines with just one fitting. Push fit, tool free, permanent fitting. pre-lubed for quick installation, approved for underground installations. Bagged.
CopperLoc 907-4 Non-Removable Tube Elbow Watts PL Tube Elbow World Wide Sourcing PPG90R-25X15 Galv Pipe Fitting
Copper and copper alloy push connect fitting. Push fit, tool free, permanent fitting. pre-lubed for quick installation, approved for underground installations. Plastic quick connect fittings are made from polysulfone, a high performance thermal plastic material. Design allows for quick and easy connections to pipe without installation tool. Use on copper, pex, CPVC and polybutylene pipe. Product meets all National Plumbing Codes. WORLDWIDE SOURCING Pipe Reducing Elbow, 1 x 1/2 in Nominal Size, Threaded, 90 deg, Malleable Iron, Galvanized
World Wide Sourcing 2B1X3/4G Galvanized 90 Deg Elbow Watts P Tube Elbow Watts PL-3036 Push-Fit Tube To Pipe Adapter
WORLDWIDE SOURCING Pipe Reducing Elbow, 1 x 3/4 in Nominal Size, Threaded, 90 deg, Malleable Iron, Galvanized Works with copper, CPVC, PEX, LPDE, MPDE, HDPE and polybutylene tubing in hot and cold water applications. Incorporates stainless steel gripping teeth in the collets, allowing the connectors to interconnect with multiple materials without special tools or tube inserts. Exclusive O-ring guide insures zero-leak connections. Tube orientation can be changed by a simple twist, reducing the amount of tubing required to plumb a water system. Reusable, approved for use behind walls and underground. Polybagged. Plastic quick connect fittings are made from polysulfone, a high performance thermal plastic material. Design allows for quick and easy connections to pipe without installation tool. Use on copper, pex, CPVC and polybutylene pipe. Product meets all National Plumbing Codes.
Watts PL-3035 Push-Fit Tube To Pipe Adapter Watts PL Tube Elbow Watts P-400 Tube Coupling
Plastic quick connect fittings are made from polysulfone, a high performance thermal plastic material. Design allows for quick and easy connections to pipe without installation tool. Use on copper, pex, CPVC and polybutylene pipe. Product meets all National Plumbing Codes. Plastic quick connect fittings are made from polysulfone, a high performance thermal plastic material. Design allows for quick and easy connections to pipe without installation tool. Use on copper, pex, CPVC and polybutylene pipe. Product meets all National Plumbing Codes. Works with copper, CPVC, PEX, LPDE, MPDE, HDPE and polybutylene tubing in hot and cold water applications. Incorporates stainless steel gripping teeth in the collets, allowing the connectors to interconnect with multiple materials without special tools or tube inserts. Exclusive O-ring guide insures zero-leak connections. Tube orientation can be changed by a simple twist, reducing the amount of tubing required to plumb a water system. Reusable, approved for use behind walls and underground. Polybagged.
Watts P-870 End Cap Watts P-602 Tube Reducing Coupling Pro Bite 630-103HC/LF812MR Straight Tube To Pipe Adapter
Works with copper, CPVC, Pex, LPDE, MPDE, HDPE and polybutylene tubing in hot and cold water applications. Incorporates stainless steel gripping teeth in the collets, allowing the connectors to interconnect with multiple materials without special tools or tube inserts. Exclusive O-ring guide insures zero-leak connections. Tube orientation can be changed by a simple twist, reducing the amount of tubing required to plumb a water system. Reusable, approved for use behind walls and underground. Works with copper, CPVC, PEX, LPDE, MPDE, HDPE and polybutylene tubing in hot and cold water applications. Incorporates stainless steel gripping teeth in the collets, allowing the connectors to interconnect with multiple materials without special tools or tube inserts. Exclusive O-ring guide insures zero-leak connections. Tube orientation can be changed by a simple twist, reducing the amount of tubing required to plumb a water system. Reusable, approved for use behind walls and underground. Polybagged. Connects to copper, PEX or CPVC, no glue, soldering, crimping or special tools, approved for in-wall and underground burial, approved for potable water, radiant and hydronic heating, easily repositioned or removed.
CONNECTOR 3/8OD X 1/4FP       Watts P-615 Push-Fit Tube To Pipe Adapter Watt PL-3031 Reducing Coupling Union
Incorporates stainless steel gripping teeth in the collets. These corrosion resistant teeth allow the connectors to interconnect with multiple materials without the need for special tools or tube inserts. It works with copper, CPVC, pex, LPDE, MPDE, HDPE and polybutylene tubing. Works with copper, CPVC, Pex, LPDE, MPDE, HDPE and polybutylene tubing in hot and cold water applications. Incorporates stainless steel gripping teeth in the collets, allowing the connectors to interconnect with multiple materials without special tools or tube inserts. Exclusive O-ring guide insures zero-leak connections. Tube orientation can be changed by a simple twist, reducing the amount of tubing required to plumb a water system. Reusable, approved for use behind walls and underground. Plastic quick connect fittings are made from polysulfone, a high performance thermal plastic material. Design allows for quick and easy connections to pipe without installation tool. Use on copper, pex, CPVC and polybutylene pipe. Product meets all National Plumbing Codes.
CopperLoc 907 Non-Removable Tube Elbow Watts P Tube Elbow NDS CPT-0500-S PVC Compression Run Tees
Copper and copper alloy push connect fittings provide plumbing system design flexibility by allowing you to join copper, CPVC, or PEX lines with just one fitting. Push fit, tool free, permanent fitting. pre-lubed for quick installation, approved for underground installations. Works with copper, CPVC, PEX, LPDE, MPDE, HDPE and polybutylene tubing in hot and cold water applications. Incorporates stainless steel gripping teeth in the collets, allowing the connectors to interconnect with multiple materials without special tools or tube inserts. Exclusive O-ring guide insures zero-leak connections. Tube orientation can be changed by a simple twist, reducing the amount of tubing required to plumb a water system. Reusable, approved for use behind walls and underground. Polybagged. Working temperature max., 140 degrees F. at 66 PSI. Working pressure 150 PSI at 70 degrees F. Complies with all applicable ASTM and ANSI standards.
KBI Flo Control ProGuard Tube To Pipe Adapter Watt PL-3030 Coupling Union Septic-Pak ZSTP2 Septic Tank Cleaner
KBI Tube To Pipe Adapter, Series: Flo Control, ProGuard, 1 in Nominal, Compression X MIPT End, SCH 40 Wall Thickness, 150 psi Working, PVC, Gray, 73 deg F, 5-1/2 in Length X 5-1/2 in Width X 3 in Height, IAPMO Certified, NSF Approved, UPC Compliant, For Irrigation, Pool and Spa Industries Plastic quick connect fittings are made from polysulfone, a high performance thermal plastic material. Design allows for quick and easy connections to pipe without installation tool. Use on copper, pex, CPVC and polybutylene pipe. Product meets all National Plumbing Codes. Pre-measured treatment packs, easy periodic treatments keep systems flowing, helps prevent septic backups.
NDS CPT-0500-T PVC Compression Run Tees Watts PL-3003 Tube Tee Watts PL Tube Elbow
NDS Pipe Tee, 1/2 in Nominal Size, Compression x Threaded, 0.86 in Inside Dia, 1.81 in Outside Dia, 5 in Length, SCH 40, 150 psi at 72 deg F Working, PVC, White, NSF Listed, ANSI Specified Plastic quick connect fittings are made from polysulfone, a high performance thermal plastic material. Design allows for quick and easy connections to pipe without installation tool. Use on copper, pex, CPVC and polybutylene pipe. Product meets all National Plumbing Codes. Plastic quick connect fittings are made from polysulfone, a high performance thermal plastic material. Design allows for quick and easy connections to pipe without installation tool. Use on copper, pex, CPVC and polybutylene pipe. Product meets all National Plumbing Codes.
Watts PL Tube Elbow Watt PL-3021 Reducing Coupling Union Watt PL-3020 Coupling Union
Plastic quick connect fittings are made from polysulfone, a high performance thermal plastic material. Design allows for quick and easy connections to pipe without installation tool. Use on copper, pex, CPVC and polybutylene pipe. Product meets all National Plumbing Codes. Plastic quick connect fittings are made from polysulfone, a high performance thermal plastic material. Design allows for quick and easy connections to pipe without installation tool. Use on copper, pex, CPVC and polybutylene pipe. Product meets all National Plumbing Codes. Plastic quick connect fittings are made from polysulfone, a high performance thermal plastic material. Design allows for quick and easy connections to pipe without installation tool. Use on copper, pex, CPVC and polybutylene pipe. Product meets all National Plumbing Codes.
Watt P-600 Quick Connect Coupling Union Watts P-810 Push-Fit Tube To Pipe Adapter Watts P Tube Elbow
Works with copper, CPVC, PEX, LPDE, MPDE, HDPE and polybutylene tubing in hot and cold water applications. Incorporates stainless steel gripping teeth in the collets, allowing the connectors to interconnect with multiple materials without special tools or tube inserts. Exclusive O-ring guide insures zero-leak connections. Tube orientation can be changed by a simple twist, reducing the amount of tubing required to plumb a water system. Reusable, approved for use behind walls and underground. Polybagged. Works with copper, CPVC, PEX, LPDE, MPDE, HDPE and polybutylene tubing in hot and cold water applications. Incorporates stainless steel gripping teeth in the collets, allowing the connectors to interconnect with multiple materials without special tools or tube inserts. Exclusive O-ring guide insures zero-leak connections. Tube orientation can be changed by a simple twist, reducing the amount of tubing required to plumb a water system. Reusable, approved for use behind walls and underground. Polybagged. Works with copper, CPVC, PEX, LPDE, MPDE, HDPE and polybutylene tubing in hot and cold water applications. Incorporates stainless steel gripping teeth in the collets, allowing the connectors to interconnect with multiple materials without special tools or tube inserts. Exclusive O-ring guide insures zero-leak connections. Tube orientation can be changed by a simple twist, reducing the amount of tubing required to plumb a water system. Reusable, approved for use behind walls and underground. Polybagged.
Watts P Tube Elbow Cash Acme U3537LFA Sharkbite Oatey 43579 Straight Floor Drain
Works with copper, CPVC, Pex, LPDE, MPDE, HDPE and polybutylene tubing in hot and cold water applications. Incorporates stainless steel gripping teeth in the collets, allowing the connectors to interconnect with multiple materials without special tools or tube inserts. Exclusive O-ring guide insures zero-leak connections. Tube orientation can be changed by a simple twist, reducing the amount of tubing required to plumb a water system. Reusable, approved for use behind walls and underground. The SharkBite Connection System is an instant push-fit connection that connects copper tubing, CTS CPVC and PEX pipe in an combination - no soldering, clamps, unions or glue required. Certified to 200 PSI and 200DegF. Compact, robust DZR brass body. Foundation of a strong, corrosion resistant, durable fitting. Design certified to ANSI/NSF-61 and ASSE 1061 product standard for use in potable water and hydronic heating water distribution.Approved to be used underground and behind walls without access panels. Lead Free Complaint. Oatey Floor Drain, General Purpose, Straight, PVC, Oatey, 2 X 3 in Connection, Solvent Weld Connection, Suitable For Use With: Over 2 in or Inside 3 in SCH 40 DWV Pipe, 4 in Strainer, Stainless Steel Strainer, 2.685 in Overall Height, 4.3 in Overall Width, White, Includes: Screw-Tite Strainer, IAPMO Listed, NES 653, ISO 9001 Certified
CopperLoc 9707-3-5 Drop Ear Non-Removable Tube Elbow CopperLoc 901-R Non-Removable Push-Fit Tube Reducing Coupling Elkhart Tectite 911 CopperLoc Non-Removable Push-Fit Tube Tee
Copper and copper alloy push connect fittings provide plumbing system design flexibility by allowing you to join copper, CPVC, or PEX lines with just one fitting. Push fit, tool free, permanent fitting. pre-lubed for quick installation, approved for underground installations. Bagged. Copper and copper alloy push connect fittings provide plumbing system design flexibility by allowing you to join copper, CPVC, or PEX lines with just one fitting. Push fit, tool free, permanent fitting. pre-lubed for quick installation, approved for underground installations. Bagged. Copper and copper alloy push connect fittings provide plumbing system design flexibility by allowing you to join copper, CPVC, or PEX lines with just one fitting. Push fit, tool free, permanent fitting. pre-lubed for quick installation, approved for underground installations. Bagged.
Quick Connect P-648 Tube Stackable Tee Watts P Tube Elbow Pro Bite 630-203HC/LF812FR Straight Tube To Pipe Adapter
Works with copper, CPVC, Pex, LPDE, MPDE, HDPE and polybutylene tubing in hot and cold water applications. Incorporates stainless steel gripping teeth in the collets, allowing the connectors to interconnect with multiple materials without special tools or tube inserts. Exclusive O-ring guide insures zero-leak connections. Tube orientation can be changed by a simple twist, reducing the amount of tubing required to plumb a water system. Reusable, approved for use behind walls and underground. Works with copper, CPVC, Pex, LPDE, MPDE, HDPE and polybutylene tubing in hot and cold water applications. Incorporates stainless steel gripping teeth in the collets, allowing the connectors to interconnect with multiple materials without special tools or tube inserts. Exclusive O-ring guide insures zero-leak connections. Tube orientation can be changed by a simple twist, reducing the amount of tubing required to plumb a water system. Reusable, approved for use behind walls and underground. Connects to copper, PEX or CPVC, no glue, soldering, crimping or special tools, approved for in-wall and underground burial, approved for potable water, radiant and hydronic heating, easily repositioned or removed.
B and K 510-804HN Galvanized Pipe Fittings Pro Bite 633-004HC/LF826R End Cap CopperLoc 10170890 Tube Cap
Meets the following specifications: Material: ANSI/ASTM A-197, Dimensions: ANSI/ASME B.16.3, Threads: ANSI B1.20.1. Connects to copper, PEX or CPVC, no glue, soldering, crimping or special tools, approved for in-wall and underground burial, approved for potable water, radiant and hydronic heating, easily repositioned or removed. Copper and copper alloy push connect fitting. Push fit, tool free, permanent fitting. pre-lubed for quick installation, approved for underground installations.
Mueller ProLine Standard Tube Coupling Watts P Tube Elbow Watts P Tube Elbow
Connects to copper, PEX or CPVC, no glue, soldering, crimping or special tools, approved for in-wall and underground burial, approved for potable water, radiant and hydronic heating, easily repositioned or removed. Quick Connect connectors are designed and manufactured for many years of trouble free service. Produced of off-white Polysulfone, a high performance thermal plastic material, the design allows for quick and easy connections without the use of installation tools. NSF-61, NSF-14, CSA B137.5, ASTM F877, UPC, and ASSE 1061 approved. Polybagged. Works with copper, CPVC, PEX, LPDE, MPDE, HDPE and polybutylene tubing in hot and cold water applications. Incorporates stainless steel gripping teeth in the collets, allowing the connectors to interconnect with multiple materials without special tools or tube inserts. Exclusive O-ring guide insures zero-leak connections. Tube orientation can be changed by a simple twist, reducing the amount of tubing required to plumb a water system. Reusable, approved for use behind walls and underground. Polybagged.
Cash Acme U3523LFA Push Fit Tube Adapter Watts P Stackable Tube Elbow Watts P-440 Tube Union Tee
1/4" X 9/16"-24 UNEF thread. Works with copper, CPVC, Pex, LPDE, MPDE, HDPE and polybutylene tubing in hot and cold water applications. Incorporates stainless steel gripping teeth in the collets, allowing the connectors to interconnect with multiple materials without special tools or tube inserts. Exclusive O-ring guide insures zero-leak connections. Tube orientation can be changed by a simple twist, reducing the amount of tubing required to plumb a water system. Reusable, approved for use behind walls and underground. Works with copper, CPVC, PEX, LPDE, MPDE, HDPE and polybutylene tubing in hot and cold water applications. Incorporates stainless steel gripping teeth in the collets, allowing the connectors to interconnect with multiple materials without special tools or tube inserts. Exclusive O-ring guide insures zero-leak connections. Tube orientation can be changed by a simple twist, reducing the amount of tubing required to plumb a water system. Reusable, approved for use behind walls and underground. Polybagged.
Watts P-601 Push-Fit Tube Reducing Union Pro Bite 630-204HC/LF822FR Straight Tube To Pipe Adapter World Wide Sourcing PPG90R-32X20 Mall. Reducing 90 Degree Elbow
Works with copper, CPVC, Pex, LPDE, MPDE, HDPE and polybutylene tubing in hot and cold water applications. Incorporates stainless steel gripping teeth in the collets, allowing the connectors to interconnect with multiple materials without special tools or tube inserts. Exclusive O-ring guide insures zero-leak connections. Tube orientation can be changed by a simple twist, reducing the amount of tubing required to plumb a water system. Reusable, approved for use behind walls and underground. 1/2" CTS x 1/4" OD Connects to copper, PEX or CPVC, no glue, soldering, crimping or special tools, approved for in-wall and underground burial, approved for potable water, radiant and hydronic heating, easily repositioned or removed. WORLDWIDE SOURCING Pipe Reducing Elbow, 1-1/4 x 3/4 in Nominal Size, Threaded, 90 deg, Malleable Iron, Galvanized
World Wide Sourcing PPG90R-32X25 Galv Pipe Fitting Oatey 43582 Floor Drain With 5 in Stainless Steel Screw-Tite Strainer Pro Bite 630-104HC/LF822MR Straight Tube To Pipe Adapter
WORLDWIDE SOURCING Pipe Reducing Elbow, 1-1/4 x 1 in Nominal Size, Threaded, 90 deg, Malleable Iron, Galvanized Oatey Floor Drain, General Purpose, 3 in or 4 in, 4.95 in Flange, 2.685 in Overall Height, 5.19 in Overall Width, ABS, ISO:9001 Certified Connects to copper, PEX or CPVC, no glue, soldering, crimping or special tools, approved for in-wall and underground burial, approved for potable water, radiant and hydronic heating, easily repositioned or removed.
CLAMP HOSE STL ASSORTMENT 40PC Cash Acme U3525LFA Push Fit Pipe to Tube Adapter Cash Acme U3531LFA Push Fit Tube Adapter
All the popular sizes in one convenient kit for use in securing hoses around pipes and for automotive uses, Worm gear type, Zinc-plated to resist rust and corrosion, Comes in a re-sealable divided PVC storage case. The SharkBite Connection System is an instant push-fit connection that connects copper tubing, CTS CPVC and PEX pipe in an combination - no soldering, clamps, unions or glue required. Certified to 200 PSI and 200degF. Compact, robust DZR brass body. Foundation of a strong, corrosion resistant, durable fitting. Design certified to ANSI/NSF-61 and ASSE 1061 product standard for use in potable water and hydronic heating water distribution.Approved to be used underground and behind walls without access panels. Lead Free Complaint. The SharkBite Connection System is an instant push-fit connection that connects copper tubing, CTS CPVC and PEX pipe in an combination - no soldering, clamps, unions or glue required. Certified to 200 PSI and 200DegF. Compact, robust DZR brass body. Foundation of a strong, corrosion resistant, durable fitting. Design certified to ANSI/NSF-61 and ASSE 1061 product standard for use in potable water and hydronic heating water distribution.Approved to be used underground and behind walls without access panels. Lead Free Complaint.
Oatey 42732 Snap-In Strainer Watts P-801 Push-Fit Tube Reducing Union NDS CPT-0750-S PVC Compression Run Tees
Fits inside Schedule 40 DWV pipe. Carded. Works with copper, CPVC, PEX, LPDE, MPDE, HDPE and polybutylene tubing in hot and cold water applications. Incorporates stainless steel gripping teeth in the collets, allowing the connectors to interconnect with multiple materials without special tools or tube inserts. Exclusive O-ring guide insures zero-leak connections. Tube orientation can be changed by a simple twist, reducing the amount of tubing required to plumb a water system. Reusable, approved for use behind walls and underground. Polybagged. Working temperature max., 140 degrees F. at 66 PSI. Working pressure 150 PSI at 70 degrees F. Complies with all applicable ASTM and ANSI standards.
NDS CPT-0750-T PVC Compression Run Tees Sharkbite U244LFA Tube Elbow Elkhart Tectite 911 CopperLoc Non-Removable Push-Fit Tube Tee
NDS Pipe Tee, 3/4 in Nominal Size, Compression x Threaded, 1.09 in Inside Dia, 2.01 in Outside Dia, 5-3/8 in Length, SCH 40, 150 psi at 72 deg F Working, PVC, White, NSF Listed, ANSI Specified The SharkBite Connection System is an instant push-fit connection that connects copper tubing, CTS CPVC and PEX pipe in an combination - no soldering, clamps, unions or glue required. Certified to 200 PSI and 200DegF. Compact, robust DZR brass body. Foundation of a strong, corrosion resistant, durable fitting. Design certified to ANSI/NSF-61 and ASSE 1061 product standard for use in potable water and hydronic heating water distribution. Approved to be used underground and behind walls without access panels. Lead Free Complaint. Copper and copper alloy push connect fittings provide plumbing system design flexibility by allowing you to join copper, CPVC, or PEX lines with just one fitting. Push fit, tool free, permanent fitting. pre-lubed for quick installation, approved for underground installations. Bagged.
Watts P-640 Tube Union Tee Sharkbite U110LFA Pipe Reducing Adapter Sharkbite U066LFA Pipe Reducing Adapter
Works with copper, CPVC, PEX, LPDE, MPDE, HDPE and polybutylene tubing in hot and cold water applications. Incorporates stainless steel gripping teeth in the collets, allowing the connectors to interconnect with multiple materials without special tools or tube inserts. Exclusive O-ring guide insures zero-leak connections. Tube orientation can be changed by a simple twist, reducing the amount of tubing required to plumb a water system. Reusable, approved for use behind walls and underground. Polybagged. The SharkBite Connection System is an instant push-fit connection that connects copper tubing, CTS CPVC and PEX pipe in an combination - no soldering, clamps, unions or glue required. Certified to 200 PSI and 200DegF. Compact, robust DZR brass body. Foundation of a strong, corrosion resistant, durable fitting. Design certified to ANSI/NSF-61 and ASSE 1061 product standard for use in potable water and hydronic heating water distribution.Approved to be used underground and behind walls without access panels. Lead Free Complaint. The SharkBite Connection System is an instant push-fit connection that connects copper tubing, CTS CPVC and PEX pipe in an combination - no soldering, clamps, unions or glue required. Certified to 200 PSI and 200DegF. Compact, robust DZR brass body. Foundation of a strong, corrosion resistant, durable fitting. Design certified to ANSI/NSF-61 and ASSE 1061 product standard for use in potable water and hydronic heating water distribution. Approved to be used underground and behind walls without access panels. Lead Free Complaint.
Pro Bite 631-003HC Tube Elbow Elkhart Tectite 911R CopperLoc Non-Removable Push-Fit Reducing Tee Watts P Drop Ear Tube Elbow
Connects to copper, PEX or CPVC, no glue, soldering, crimping or special tools, approved for in-wall and underground burial, approved for potable water, radiant and hydronic heating, easily repositioned or removed. Copper and copper alloy push connect fittings provide plumbing system design flexibility by allowing you to join copper, CPVC, or PEX lines with just one fitting. Push fit, tool free, permanent fitting. pre-lubed for quick installation, approved for underground installations. Bagged. Works with copper, CPVC, Pex, LPDE, MPDE, HDPE and polybutylene tubing in hot and cold water applications. Incorporates stainless steel gripping teeth in the collets, allowing the connectors to interconnect with multiple materials without special tools or tube inserts. Exclusive O-ring guide insures zero-leak connections. Tube orientation can be changed by a simple twist, reducing the amount of tubing required to plumb a water system. Reusable, approved for use behind walls and underground.
Sharkbite U120LFA Straight Pipe Adapter Watts P Tube Elbow American Valve P230 1 PVC Fitting
The SharkBite Connection System is an instant push-fit connection that connects copper tubing, CTS CPVC and PEX pipe in an combination - no soldering, clamps, unions or glue required. Certified to 200 PSI and 200DegF. Compact, robust DZR brass body. Foundation of a strong, corrosion resistant, durable fitting. Design certified to ANSI/NSF-61 and ASSE 1061 product standard for use in potable water and hydronic heating water distribution. Approved to be used underground and behind walls without access panels. Lead Free Complaint. Works with copper, CPVC, PEX, LPDE, MPDE, HDPE and polybutylene tubing in hot and cold water applications. Incorporates stainless steel gripping teeth in the collets, allowing the connectors to interconnect with multiple materials without special tools or tube inserts. Exclusive O-ring guide insures zero-leak connections. Tube orientation can be changed by a simple twist, reducing the amount of tubing required to plumb a water system. Reusable, approved for use behind walls and underground. Polybagged. AMERICAN Valve Pipe Tee, 1 in Nominal Size, Compression x Compression x NPT, 1.31 in Inside Dia, 2.4 in Outside Dia, 5.65 in Length, SCH 40, 150 psi at 73 deg F Working, PVC, 140 deg F
Watts P-800 Push-Fit Tube Union Sharkbite U514LFA End Cap Sharkbite U072LFA Pipe Reducing Adapter
Works with copper, CPVC, Pex, LPDE, MPDE, HDPE and polybutylene tubing in hot and cold water applications. Incorporates stainless steel gripping teeth in the collets, allowing the connectors to interconnect with multiple materials without special tools or tube inserts. Exclusive O-ring guide insures zero-leak connections. Tube orientation can be changed by a simple twist, reducing the amount of tubing required to plumb a water system. Reusable, approved for use behind walls and underground. The SharkBite Connection System is an instant push-fit connection that connects copper tubing, CTS CPVC and PEX pipe in an combination - no soldering, clamps, unions or glue required. Certified to 200 PSI and 200DegF. Compact, robust DZR brass body. Foundation of a strong, corrosion resistant, durable fitting. Design certified to ANSI/NSF-61 and ASSE 1061 product standard for use in potable water and hydronic heating water distribution.Approved to be used underground and behind walls without access panels. Lead Free Complaint. The SharkBite Connection System is an instant push-fit connection that connects copper tubing, CTS CPVC and PEX pipe in an combination - no soldering, clamps, unions or glue required. Certified to 200 PSI and 200DegF. Compact, robust DZR brass body. Foundation of a strong, corrosion resistant, durable fitting. Design certified to ANSI/NSF-61 and ASSE 1061 product standard for use in potable water and hydronic heating water distribution. Approved to be used underground and behind walls without access panels. Lead Free Complaint.
Mueller ProLine Standard Tube Coupling Sharkbite U004LFA Straight Tube Coupling Watts PL-3023 Tube Tee
Connects to copper, PEX or CPVC, no glue, soldering, crimping or special tools, approved for in-wall and underground burial, approved for potable water, radiant and hydronic heating, easily repositioned or removed. The SharkBite Connection System is an instant push-fit connection that connects copper tubing, CTS, CPVC and PEX  pipe in any combination - no soldering, clamps, unions or glue required. Certified to 200 PSI and 200DegF. Compact, robust DZR brass body. Foundation of a strong, corrosion resistant, durable fitting. Design certified to ANSI/NSF-61 and ASSE 1061 product standard for use in potable water and hydronic heating water distribution.Approved to be used underground and behind walls without access panels. Lead Free Complaint. Plastic quick connect fittings are made from polysulfone, a high performance thermal plastic material. Design allows for quick and easy connections to pipe without installation tool. Use on copper, pex, CPVC and polybutylene pipe. Product meets all National Plumbing Codes.
Mueller ProLine Tube Reducing Coupling Genova 300 Dome Shaped Top Pipe Cap NDS CPT-1000-S PVC Compression Run Tees
Connects to copper, PEX or CPVC, no glue, soldering, crimping or special tools, approved for in-wall and underground burial, approved for potable water, radiant and hydronic heating, easily repositioned or removed. Used to cap pipe. Conforms to ASTM D2466. Working temperature max., 140 degrees F. at 66 PSI. Working pressure 150 PSI at 70 degrees F. Complies with all applicable ASTM and ANSI standards.
NDS CPT-1000-T PVC Compression Run Tees Oatey 43583 Straight Floor Drain Watts PL-3033 Tube Tee
NDS Pipe Tee, 1 in Nominal Size, Compression x Threaded, 1.31 in Inside Dia, 2.27 in Outside Dia, 5-5/8 in Length, SCH 40, 150 psi at 72 deg F Working, PVC, White, NSF Listed, ANSI Specified Oatey Floor Drain, General Purpose, Straight, PVC, Oatey, 3 X 4 in Connection, Solvent Weld Connection, Suitable For Use With: Over 3 in or Inside 4 in SCH 40 DWV PVC Pipe, 5 in Strainer, Stainless Steel Strainer, 2.685 in Overall Height, 5-1/4 in Overall Width, White, Includes: Screw-Tite Strainer, IAPMO Listed, NES 653, ISO 9001 Certified Plastic quick connect fittings are made from polysulfone, a high performance thermal plastic material. Design allows for quick and easy connections to pipe without installation tool. Use on copper, pex, CPVC and polybutylene pipe. Product meets all National Plumbing Codes.
Sharkbite U276LFA Dishwasher Tube To Pipe Elbow Pro Bite 631-103HC Drop Ear Tube To Pipe Elbow Sharkbite U512LFA End Cap
The SharkBite Connection System is an instant push-fit connection that connects copper tubing, CTS CPVC and PEX pipe in an combination - no soldering, clamps, unions or glue required. Certified to 200 PSI and 200DegF. Compact, robust DZR brass body. Foundation of a strong, corrosion resistant, durable fitting. Design certified to ANSI/NSF-61 and ASSE 1061 product standard for use in potable water and hydronic heating water distribution.Approved to be used underground and behind walls without access panels. Lead Free Complaint. Connects to copper, PEX or CPVC, no glue, soldering, crimping or special tools, approved for in-wall and underground burial, approved for potable water, radiant and hydronic heating, easily repositioned or removed. The SharkBite Connection System is an instant push-fit connection that connects copper tubing, CTS CPVC and PEX pipe in an combination - no soldering, clamps, unions or glue required. Certified to 200 PSI and 200DegF. Compact, robust DZR brass body. Foundation of a strong, corrosion resistant, durable fitting. Design certified to ANSI/NSF-61 and ASSE 1061 product standard for use in potable water and hydronic heating water distribution.Approved to be used underground and behind walls without access panels. Lead Free Complaint.
Sharkbite U008LFA Straight Tube Coupling Watt PL-3016 Quick Connect Reducing Coupling Union Mintcraft HCMAN06 Hose Clamps
The SharkBite Connection System is an instant push-fit connection that connects copper tubing, CTS, CPVC and PEX  pipe in any combination - no soldering, clamps, unions or glue required. Certified to 200 PSI and 200DegF. Compact, robust DZR brass body. Foundation of a strong, corrosion resistant, durable fitting. Design certified to ANSI/NSF-61 and ASSE 1061 product standard for use in potable water and hydronic heating water distribution.Approved to be used underground and behind walls without access panels. Lead Free Complaint. Plastic quick connect fittings are made from polysulfone, a high performance thermal plastic material. Design allows for quick and easy connections to pipe without installation tool. Use on copper, pex, CPVC and polybutylene pipe. Product meets all National Plumbing Codes. 1-piece stainless steel housing and band in precision engineered, interlocked construction.
Mintcraft HCMAN04 Hose Clamps World Wide Sourcing PPG90R-40X32 Galv Pipe Fitting World Wide Sourcing PPG90R-40X25 Galv Pipe Fitting
1-piece stainless steel housing and band in precision engineered, interlocked construction. WORLDWIDE SOURCING Pipe Reducing Elbow, 1-1/2 x 1-1/4 in Nominal Size, Threaded, 90 deg, Malleable Iron, Galvanized WORLDWIDE SOURCING Pipe Reducing Elbow, 1-1/2 x 1 in Nominal Size, Threaded, 90 deg, Malleable Iron, Galvanized
Watts P-616 Push-Fit Closet Tube Adapter TONG DISCONNECT 3/4IN         TONG DISCONNECT 1IN
TONG DISCONNECT 3/4IN
Our Price: $8.07
TONG DISCONNECT 1IN
Our Price: $8.07
Works with copper, CPVC, Pex, LPDE, MPDE, HDPE and polybutylene tubing in hot and cold water applications. Incorporates stainless steel gripping teeth in the collets, allowing the connectors to interconnect with multiple materials without special tools or tube inserts. Exclusive O-ring guide insures zero-leak connections. Tube orientation can be changed by a simple twist, reducing the amount of tubing required to plumb a water system. Reusable, approved for use behind walls and underground.
Sharkbite U088LFA Pipe Reducing Adapter Sharkbite U068LFA Pipe Reducing Adapter Sharkbite U116LFA Pipe Reducing Adapter
The SharkBite Connection System is an instant push-fit connection that connects copper tubing, CTS CPVC and PEX pipe in an combination - no soldering, clamps, unions or glue required. Certified to 200 PSI and 200DegF. Compact, robust DZR brass body. Foundation of a strong, corrosion resistant, durable fitting. Design certified to ANSI/NSF-61 and ASSE 1061 product standard for use in potable water and hydronic heating water distribution. Approved to be used underground and behind walls without access panels. Lead Free Complaint. The SharkBite Connection System is an instant push-fit connection that connects copper tubing, CTS CPVC and PEX pipe in an combination - no soldering, clamps, unions or glue required. Certified to 200 PSI and 200DegF. Compact, robust DZR brass body. Foundation of a strong, corrosion resistant, durable fitting. Design certified to ANSI/NSF-61 and ASSE 1061 product standard for use in potable water and hydronic heating water distribution. Approved to be used underground and behind walls without access panels. Lead Free Complaint. The SharkBite Connection System is an instant push-fit connection that connects copper tubing, CTS CPVC and PEX pipe in an combination - no soldering, clamps, unions or glue required. Certified to 200 PSI and 200DegF. Compact, robust DZR brass body. Foundation of a strong, corrosion resistant, durable fitting. Design certified to ANSI/NSF-61 and ASSE 1061 product standard for use in potable water and hydronic heating water distribution. Approved to be used underground and behind walls without access panels. Lead Free Complaint.
Sharkbite U134LFA Straight Pipe Adapter Watts P-617 Push-Fit Tube To Pipe Adapter END STOP 1 INCH
The SharkBite Connection System is an instant push-fit connection that connects copper tubing, CTS CPVC and PEX pipe in an combination - no soldering, clamps, unions or glue required. Certified to 200 PSI and 200DegF. Compact, robust DZR brass body. Foundation of a strong, corrosion resistant, durable fitting. Design certified to ANSI/NSF-61 and ASSE 1061 product standard for use in potable water and hydronic heating water distribution. Approved to be used underground and behind walls without access panels. Lead Free Complaint. Works with copper, CPVC, Pex, LPDE, MPDE, HDPE and polybutylene tubing in hot and cold water applications. Incorporates stainless steel gripping teeth in the collets, allowing the connectors to interconnect with multiple materials without special tools or tube inserts. Exclusive O-ring guide insures zero-leak connections. Tube orientation can be changed by a simple twist, reducing the amount of tubing required to plumb a water system. Reusable, approved for use behind walls and underground. Connects to copper, CPVC, PEX, LPDE, MPDE, HDPE and polybutylene tubing.
B K Industries 160-003HC Compression Couplings Ideal Tridon Micro-Gear 62M Worm Gear Hose Clamp 1IN CTS ELBOW
Hydroformed steel body, rubber compression gasket, and metal friction ring, rated up to 125 PSI at 210 degrees F., iron pipe size for piping or repairs on galvanized pipe. Tiny, tough, precision engineered clamps provide tenacious connections on small diameter hose and tubing. Slim-line construction eases installation in confined areas. 5/16" wide band, 1/4" hex- head screw, 5/16" wide housing. Watts Pipe Elbow, 1 in Nominal, CTS x CTS End, 90 Deg, 100 Psi At 180 Deg F, 250 Psi At 75 Deg F Working, Plastic, Standards: FDA, ANSI/NSF-61, NSF-14, CSA B1375, ASTM F877, NSF-UP and IAPMO ASSE 1061-2006, For New Installations or Plumbing Repair Applications
Sharkbite U009LFA Tube Reducing Coupling Sharkbite U006LFA Straight Tube Coupling KBI Flo Control ProGuard Tube To Pipe Adapter
The SharkBite Connection System is an instant push-fit connection that connects copper tubing, CTS, CPVC and PEX  pipe in any combination - no soldering, clamps, unions or glue required. Certified to 200 PSI and 200DegF. Compact, robust DZR brass body. Foundation of a strong, corrosion resistant, durable fitting. Design certified to ANSI/NSF-61 and ASSE 1061 product standard for use in potable water and hydronic heating water distribution.Approved to be used underground and behind walls without access panels. Lead Free Complaint. The SharkBite Connection System is an instant push-fit connection that connects copper tubing, CTS, CPVC and PEX  pipe in any combination - no soldering, clamps, unions or glue required. Certified to 200 PSI and 200DegF. Compact, robust DZR brass body. Foundation of a strong, corrosion resistant, durable fitting. Design certified to ANSI/NSF-61 and ASSE 1061 product standard for use in potable water and hydronic heating water distribution.Approved to be used underground and behind walls without access panels. Lead Free Complaint. KBI Tube To Pipe Adapter, Series: Flo Control, ProGuard, 1-1/2 in Nominal, Compression X MIPT End, SCH 40 Wall Thickness, 150 psi Working, PVC, Gray, 73 deg F, 3 in Length X 1-3/4 in Width X 5-1/2 in Height, IAPMO Certified, NSF Approved, UPC Compliant, For Irrigation, Pool and Spa Industries
Watts P-815 Push-Fit Tube To Pipe Adapter Quick Connect P-848 Tube Reducing Tee Sharkbite U248LFA Tube Elbow
Works with copper, CPVC, Pex, LPDE, MPDE, HDPE and polybutylene tubing in hot and cold water applications. Incorporates stainless steel gripping teeth in the collets, allowing the connectors to interconnect with multiple materials without special tools or tube inserts. Exclusive O-ring guide insures zero-leak connections. Tube orientation can be changed by a simple twist, reducing the amount of tubing required to plumb a water system. Reusable, approved for use behind walls and underground. Works with copper, CPVC, Pex, LPDE, MPDE, HDPE and polybutylene tubing in hot and cold water applications. Incorporates stainless steel gripping teeth in the collets, allowing the connectors to interconnect with multiple materials without special tools or tube inserts. Exclusive O-ring guide insures zero-leak connections. Tube orientation can be changed by a simple twist, reducing the amount of tubing required to plumb a water system. Reusable, approved for use behind walls and underground. The SharkBite Connection System is an instant push-fit connection that connects copper tubing, CTS CPVC and PEX pipe in an combination - no soldering, clamps, unions or glue required. Certified to 200 PSI and 200DegF. Compact, robust DZR brass body. Foundation of a strong, corrosion resistant, durable fitting. Design certified to ANSI/NSF-61 and ASSE 1061 product standard for use in potable water and hydronic heating water distribution. Approved to be used underground and behind walls without access panels. Lead Free Complaint.
CONNECTOR MALE 1IN CTSX1IN MIP Sharkbite U308LFA Tube To Pipe Elbow Sharkbite U518LFA End Cap
Incorporates stainless steel gripping teeth in the collets. These corrosion resistant teeth allow the connectors to interconnect with multiple materials without the need for special tools or tube inserts. It works with copper, CPVC, pex, LPDE, MPDE, HDPE and polybutylene tubing. The SharkBite Connection System is an instant push-fit connection that connects copper tubing, CTS CPVC and PEX pipe in an combination - no soldering, clamps, unions or glue required. Certified to 200 PSI and 200DegF. Compact, robust DZR brass body. Foundation of a strong, corrosion resistant, durable fitting. Design certified to ANSI/NSF-61 and ASSE 1061 product standard for use in potable water and hydronic heating water distribution. Approved to be used underground and behind walls without access panels. Lead Free Complaint. The SharkBite Connection System is an instant push-fit connection that connects copper tubing, CTS CPVC and PEX pipe in an combination - no soldering, clamps, unions or glue required. Certified to 200 PSI and 200DegF. Compact, robust DZR brass body. Foundation of a strong, corrosion resistant, durable fitting. Design certified to ANSI/NSF-61 and ASSE 1061 product standard for use in potable water and hydronic heating water distribution.Approved to be used underground and behind walls without access panels. Lead Free Complaint.
Sharkbite U280LFA Tube To Pipe Elbow Sharkbite U334LFA Drop Ear Tube To Pipe Elbow SGP K-87 Septic Tank Cleaner
The SharkBite Connection System is an instant push-fit connection that connects copper tubing, CTS CPVC and PEX pipe in an combination - no soldering, clamps, unions or glue required. Certified to 200 PSI and 200DegF. Compact, robust DZR brass body. Foundation of a strong, corrosion resistant, durable fitting. Design certified to ANSI/NSF-61 and ASSE 1061 product standard for use in potable water and hydronic heating water distribution. Approved to be used underground and behind walls without access panels. Lead Free Complaint. The SharkBite Connection System is an instant push-fit connection that connects copper tubing, CTS CPVC and PEX pipe in an combination - no soldering, clamps, unions or glue required. Certified to 200 PSI and 200DegF. Compact, robust DZR brass body. Foundation of a strong, corrosion resistant, durable fitting. Design certified to ANSI/NSF-61 and ASSE 1061 product standard for use in potable water and hydronic heating water distribution.Approved to be used underground and behind walls without access panels. Lead Free Complaint. Contains specialized bacteria to digest and degrade soaps and detergents, proteins, starches, fats and grease in drywells, septic systems and cesspools. Non-volatile, non-corrosive and non-flammable. Safe and easy to use. Harmless to the environment. Use 1 quart for each 500 gallon capacity twice a year.
Sharkbite U050LFA Tube Reducing Coupling Oatey 43637 Bell Trap Drain Pro Bite 631-004HC Tube Elbow
The SharkBite Connection System is an instant push-fit connection that connects copper tubing, CTS, CPVC and PEX  pipe in any combination - no soldering, clamps, unions or glue required. Certified to 200 PSI and 200DegF. Compact, robust DZR brass body. Foundation of a strong, corrosion resistant, durable fitting. Design certified to ANSI/NSF-61 and ASSE 1061 product standard for use in potable water and hydronic heating water distribution.Approved to be used underground and behind walls without access panels. Lead Free Complaint. Molded-in bell in lid. Strainers are hinged to body. 1-1/2" or 2" fit over 1-1/2" Sch. 40 DWV pipe or into 2" coupling. 3" or 4" fit over 3" or inside of 4" Sch. 40 DWV pipe. Connects to copper, PEX or CPVC, no glue, soldering, crimping or special tools, approved for in-wall and underground burial, approved for potable water, radiant and hydronic heating, easily repositioned or removed.
DISCONECT W/GAUGE1/2-3/4-1 3PK Pro Bite 632-003HC/LF814R Tube Tee CONNECT FEMALE 1IN CTSX1IN FIP
The SharkBite PVC IPS (Iron Pipe Size) disconnect clip can be used the release a SharkBite PVC IPS Fitting from Sch. 40, 80, 120 PVC Pipe. The PVC disconnect clip will release the fitting on the white collar of the fitting. The PVC Disconnect Clip also serves as a safe seal depth gauge to mark the PVC Pipe to ensure the fitting has been inserted to the proper depth. Connects to copper, PEX or CPVC, no glue, soldering, crimping or special tools, approved for in-wall and underground burial, approved for potable water, radiant and hydronic heating, easily repositioned or removed. Incorporates stainless steel gripping teeth in the collets. These corrosion resistant teeth allow the connectors to interconnect with multiple materials without the need for special tools or tube inserts. It works with copper, CPVC, pex, LPDE, MPDE, HDPE and polybutylene tubing.
Sharkbite U4008LFA Tube Conversion Coupling B and K 160-303NL Compression Couplings RID-X 1920080306 Septic Tank Cleaner
Used to transition existing polybutylene pipe to copper, CPVC or PEX tubing. 200 psi maximum pressure. Brass body and nut, rubber gaskets. Rated up to 125 PSI at 210 DegF. Contains millions of bacteria and enzymes to help prevent septic backup by breaking down solid organic waste. Digests paper, fats, oils, grease, protein, and starches. 100% natural active ingredients safe for all pipes and plumbing. One dose, two-dose powders or three-dose gel-pac.
Sharkbite U016LFA Straight Tube Coupling CONNECTOR FEMALE 3/4CTS X 1FPT Roebic K-47 Cesspool Bacteria Treatment
The SharkBite Connection System is an instant push-fit connection that connects copper tubing, CTS, CPVC and PEX  pipe in any combination - no soldering, clamps, unions or glue required. Certified to 200 PSI and 200DegF. Compact, robust DZR brass body. Foundation of a strong, corrosion resistant, durable fitting. Design certified to ANSI/NSF-61 and ASSE 1061 product standard for use in potable water and hydronic heating water distribution.Approved to be used underground and behind walls without access panels. Lead Free Complaint. Incorporates stainless steel gripping teeth in the collets. These corrosion resistant teeth allow the connectors to interconnect with multiple materials without the need for special