Home > PLUMBING > ROUGH PLUMBING SUPPLIES > PIPE REPAIR
Choose a sub category:
RUBBER FLEX FITTINGS HOSE CLAMPS PIPE REPAIR CLAMPS
PIPE REPAIR KITS PIPE REPAIR COUPLINGS PVC COMPRESSION FITTINGS
SADDLE TEES TEST CAPS & PLUGS PIPE/TUBING STRAPS & HANGERS
PIPE GUARDS
Sort By:
1
Oatey 39100/33460 Test Caps Oatey 39101/33461 Test Caps Oatey 39102/33462 Test Caps
Inexpensive, disposable test caps for pressure testing ABS or PVC with up to 10 pounds pressure. Cap is solvent welded inside open pipe end. After test the center is knocked out and thrown away. Made of ABS. Inexpensive, disposable test caps for pressure testing ABS or PVC with up to 10 pounds pressure. Cap is solvent welded inside open pipe end. After test the center is knocked out and thrown away. Made of ABS. Inexpensive, disposable test caps for pressure testing ABS or PVC with up to 10 pounds pressure. Cap is solvent welded inside open pipe end. After test the center is knocked out and thrown away. Made of ABS.
Oatey 39103/33463 Test Caps Elkhart 32414 2-Hole Tube Strap B&K G85-300HC Stud Guard
Inexpensive, disposable test caps for pressure testing ABS or PVC with up to 10 pounds pressure. Cap is solvent welded inside open pipe end. After test the center is knocked out and thrown away. Made of ABS. Contractor Pack - Bagged Protects pipes and wiring installation.
B and K Industries P01-050HC Baby J-Hook B and K Industries P01-075HC Baby J-Hook B&K G85-500HC Stud Guard
ABS plastic J-hook to be used for hanging pipe from joists, rafters, or studs.  Includes nails for secure fit. ABS plastic J-hook to be used for hanging pipe from joists, rafters, or studs.  Includes nails for secure fit. Protects pipes and wiring installation.
B&K G13-100HC 2-Hole Pipe Strap B and K P28-050HC Pipe Clamps B and K Industries P01-100HC Baby J-Hook
Galvanized steel two-hole strap to secure pipe.  Two holes for use with nails or screws to ensure stable fit. Durable polypropylene standard clamp.  Split, ribbed design to allow for expansion and contraction after installation.  Flanged with holes for secure installation. ABS plastic J-hook to be used for hanging pipe from joists, rafters, or studs.  Includes nails for secure fit.
B&K G13-038HC 2-Hole Pipe Strap B&K C13-100HC 2-Hole Pipe Strap B&K G85-900HC Stud Guard
Galvanized steel two-hole strap to secure pipe.  Two holes for use with nails or screws to ensure stable fit. Copper plated two-hole strap to secure pipe.  Corrosion resistant, for indoor & outdoor use. Protects pipes and wiring installation.
B and K P28-075HC Pipe Clamps B and K Industries G65-050HC Clevis Hanger B&K G13-125HC 2-Hole Pipe Strap
Durable polypropylene standard clamp.  Split, ribbed design to allow for expansion and contraction after installation.  Flanged with holes for secure installation. Galvanized steel for IPS pipe.  For use with all thread rod up to 3/8".  Works as a suspension style hanger. Galvanized steel two-hole strap to secure pipe.  Two holes for use with nails or screws to ensure stable fit.
B&K C13-125HC 2-Hole Pipe Strap B&K G13-050HC 2-Hole Pipe Strap B&K C15-125HC Nail
Copper plated two-hole strap to secure pipe.  Corrosion resistant, for indoor & outdoor use. Galvanized steel two-hole strap to secure pipe.  Two holes for use with nails or screws to ensure stable fit. B&K Nail, 1-1/4 in, Copper, Plated Steel
B&K C13-150HC 2-Hole Pipe Strap B&K P20-100HC Perforated Hanger Tape B and K Industries P25-050HC Pipe Clamp
Copper plated two-hole strap to secure pipe.  Corrosion resistant, for indoor & outdoor use. Plastic strapping with perforated holes to be used for securing any size pipe.  Allows custom straps to be fabricated.  Easy to cut and lightweight. Durable polypropylene full clamp provides an easy and efficient way to secure pipes.  Clamp grips, insulates, and isolates the pipe from the mounting surface.  Preloaded barbed nails allow pipe to secured in any direction.
B&K G20-124HC Pipe Strap B&K C13-050HC 2-Hole Pipe Strap B and K P25-075HC Pipe Clamps
Galvanized steel 24 gauge strapping with perforated holes to be used for securing any size pipe.  Allows custom straps to be fabricated. Copper plated two-hole strap to secure pipe.  Corrosion resistant, for indoor & outdoor use. Durable polypropylene full clamp provides an easy and efficient way to secure pipes.  Clamp grips, insulates, and isolates the pipe from the mounting surface.  Preloaded barbed nails allow pipe to secured in any direction.
Elkhart 32428 2-Hole Tube Strap B&K G80-038HC Plate Connector 3/8 in B and K Industries P24-050HC Pipe Clamps
Contractor Pack - Bagged Galvanized malleable iron top plate connector used to connect split ring hangers with a 3/8" all thread rod. Durable polypropylene half clamp provides an easy and efficient way to secure pipes.  Clamp snaps around pipe and preloaded barbed nails allow pipe to secured in any direction.
B&K G20-128HC Pipe Strap B&K C13-075HC 2-Hole Pipe Strap Plumb Pak PP20552 Extension Tube
Galvanized steel 28 gauge strapping with perforated holes to be used for securing any size pipe.  Allows custom straps to be fabricated. Lightweight steel. Copper plated two-hole strap to secure pipe.  Corrosion resistant, for indoor & outdoor use. Plumb Pak Extension Tube, 1-1/2 in Dia X 6 in Length, Slip Joint, PVC, White
Elkhart 32424 2-Hole Tube Strap B and K P24-075HC Pipe Clamps TAILPIECE FLANGE 1-1/2ODX4 WHT
Contractor Pack - Bagged Durable polypropylene half clamp provides an easy and efficient way to secure pipes.  Clamp snaps around pipe and preloaded barbed nails allow pipe to secured in any direction. Fits slip joint or direct connect tubes. Includes tailpiece with two nuts and washers.
Elkhart 32426 2-Hole Tube Strap B and K G72-050HC Split Ring Hangers B and K G72-075HC Split Ring Hangers
Contractor Pack - Bagged B & K Ring Hanger, Split, 1/2 in Opening, Malleable Iron, Galvanized B & K Ring Hanger, Split, 3/4 in Opening, Malleable Iron, Galvanized
B&K G60-038HC Beam Clamp Plumb Pak PP20999 Drain Pipe Adapter B & K Industries P27-075HC Pipe Insulator
Galvanized malleable iron universal beam clamp used to attach hanger rod to top or bottom of a beam or joist. Plumb Pak Drain Pipe Adapter, 1-1/2 in Nominal, Solvent Weld X Compression End, Plastic, White Durable polypropylene pipe insulator.  V-shaped notch to easily snap onto pipe.  Flanged with holes for secure installation.  Eliminates noise and vibration.
Plumb Pak PP20944 Extension Tube B & K Industries P27-050HC Pipe Insulator B&K G13-150HC 2-Hole Pipe Strap
Plumb Pak Extension Tube, 1-1/4 in Dia X 6 in Length, Slip Joint, PVC, White Durable polypropylene pipe insulator.  V-shaped notch to easily snap onto pipe.  Flanged with holes for secure installation.  Eliminates noise and vibration. Galvanized steel two-hole strap to secure pipe.  Two holes for use with nails or screws to ensure stable fit.
Plumb Pak PP20554 Sink Drain Coupling B&K G13-075HC 2-Hole Pipe Strap B and K Industries C23-050HC J-Hook
With 1-1/2" x 1-1/4" reducing washers. Galvanized steel two-hole strap to secure pipe.  Two holes for use with nails or screws to ensure stable fit. Provides quick nail support.
B&K C13-200HC 2-Hole Pipe Strap TAILPIECE FLANGE 1-1/2ODX6 WHT Worldwide Sourcing TWC0534-3L Hanger Iron
Copper plated two-hole strap to secure pipe.  Corrosion resistant, for indoor & outdoor use. Fits slip joint or direct connect tubes. Includes tailpiece with two nuts and washers. Galvanized finish. 3/4" x 10'
B and K P24-100HC Pipe Clamps Oatey 43561 Snap-In Floor Drain B and K G72-100HC Split Ring Hangers
Durable polypropylene half clamp provides an easy and efficient way to secure pipes.  Clamp snaps around pipe and preloaded barbed nails allow pipe to secured in any direction. Designed for drainage in areas where waterproofing membrane is not required.  Plastic Snap-In Drain can be solvent welded or inserted into Sch. 40 DWV pipe.  One piece design does not allow for removal of the cover. B & K Ring Hanger, Split, 1 in Opening, Malleable Iron, Galvanized
B&K G13-200HC 2-Hole Pipe Strap B&K G60-050HC Beam Clamp B and K Industries P28-100HC Pipe Clamp
Galvanized steel two-hole strap to secure pipe.  Two holes for use with nails or screws to ensure stable fit. Galvanized malleable iron universal beam clamp used to attach hanger rod to top or bottom of a beam or joist. Durable polypropylene standard clamp.  Split, ribbed design to allow for expansion and contraction after installation.  Flanged with holes for secure installation.
B and K Industries G65-075HC Clevis Hanger B and K V30-150HC Pipe Hangers B&K G86-800HC Stud Plate
Galvanized steel for IPS pipe.  For use with all thread rod up to 3/8".  Works as a suspension style hanger. Vinyl coated galvanized steel DWV pipe hanger.  Locking screw keeps pipe secure.  Keyhole design provides faster installation.  Perforated holes allow for several hanging lengths. Protects pipes and wiring installation.
B and K Industries G65-100HC Clevis Hanger B and K Industries G10-050HC Pipe Hook B&K G18-050HC 1-Hole Pipe Strap
Galvanized steel for IPS pipe.  For use with all thread rod up to 3/8".  Works as a suspension style hanger. Galvanized steel water pipe supply hook.  Nail point ends for easy drive-in use. Vinyl coated. Galvanized steel one-hole strap to secure pipe.  One hole for use with nails or screws to ensure stable fit in tight areas.
B and K Industries G65-150HC Clevis Hanger Plumb Pak PP205512 Extension Tube B and K Industries G10-075HC Pipe Hook
Galvanized steel for IPS pipe.  For use with all thread rod up to 3/8".  Works as a suspension style hanger. Plumb Pak Extension Tube, 1-1/2 in Dia X 12 in Length, Slip Joint, Plastic, White Galvanized steel water pipe supply hook.  Nail point ends for easy drive-in use. Vinyl coated.
Elkhart 83003 2-Hole Tube Strap Plumb Pak PP20668 Master End Outlet Tee and Tailpiece With Baffle B and K Industries P25-100HC Pipe Clamp
Contractor Pack - Bagged Plumb Pak Master End Outlet Tee and Tailpiece, 1-1/2 in Nominal, Slip/Direct End, Plastic, White Durable polypropylene full clamp provides an easy and efficient way to secure pipes.  Clamp grips, insulates, and isolates the pipe from the mounting surface.  Preloaded barbed nails allow pipe to secured in any direction.
B&K C22-075HC J-Nail Pipe Strap B and K V30-200HC Pipe Hangers Plumb Pak PP20664 Master Dishwasher Tailpiece
Provides quick nail support. Vinyl coated galvanized steel DWV pipe hanger.  Locking screw keeps pipe secure.  Keyhole design provides faster installation.  Perforated holes allow for several hanging lengths. For use with hose or clamp.
B&K P20-250HC Perforated Hanger Tape TUBE EXTEN SLIP 1-1/2X6IN WHT Plumb Pak PP20945 Extension Tube
Plastic strapping with perforated holes to be used for securing any size pipe.  Allows custom straps to be fabricated.  Easy to cut and lightweight. For kitchen and bathroom sink drains. Connects to either plastic or metal inlets. Plumb Pak Extension Tube, 1-1/4 in Dia X 12 in Length, Slip Joint, PVC, White
B&K G18-075HC 1-Hole Pipe Strap Oatey 43560 Snap-In Drain TEE CENTER OUTLET 1-1/2IN WHT
Galvanized steel one-hole strap to secure pipe.  One hole for use with nails or screws to ensure stable fit in tight areas. Designed for drainage in areas where waterproofing membrane is not required.  Plastic Snap-In Drain can be solvent welded or inserted into Sch. 40 DWV pipe.  One piece design does not allow for removal of the cover. Fits slip joint tubes. Includes center outlet with two nuts and washers. 1-1/2" diameter.
B and K Industries G10-100HC Pipe Hook Plumb Pak PP20905 Sink Tailpiece American Valve P600U 1/2 PVC Fitting
Galvanized steel water pipe supply hook.  Nail point ends for easy drive-in use. Vinyl coated. Plumb Pak Sink Tailpiece, 1-1/2 in Dia X 6 in Length, Flanged, PVC, White For use in general piping applications,for Sch 40 metal and plastic pipe. Easy to operate for instant emergency piping. Piping must be restrained.
B and K Industries G65-200HC Clevis Hanger Plumb Pak PP905W Sink Tailpiece TRAP ADAPTER 1-1/2IN WHITE
Galvanized steel for IPS pipe.  For use with all thread rod up to 3/8".  Works as a suspension style hanger. Plumb Pak Sink Tailpiece, 1-1/2 in Dia X 6 in Length, Flanged, PVC, White, For Kitchen Use Fits slip joint tubes. Includes trap adapter with on nut and washer. 1-1/2" diameter.
P-TRAP SLIP JOINT 1-1/2IN WHT B and K Industries C10-050HC Pipe Hook B and K Industries V30-300HC Pipe Hanger
For kitchen and bathroom sink drains. Includes P-trap with two nuts. Copper plated water pipe supply hook.  Corrosion resistant, for indoor & outdoor use.  Nail point ends for easy drive-in use. Vinyl coated galvanized steel DWV pipe hanger.  Locking screw keeps pipe secure.  Keyhole design provides faster installation.  Perforated holes allow for several hanging lengths.
B&K C13-038HC 2-Hole Pipe Strap B and K C10-075HC Pipe Hooks American Valve P600CTS 1/2 CPVC Fitting
Copper plated two-hole strap to secure pipe.  Corrosion resistant, for indoor & outdoor use. Copper plated water pipe supply hook.  Corrosion resistant, for indoor & outdoor use.  Nail point ends for easy drive-in use. For use in general piping applications,using copper tube sized pipe. Easy to operate for instant emergency piping. Piping must be restrained
Oatey 42757 Condensate P-Trap Cobra Zip-It 00400 Drain Clean Tool Plumb Pak PP20558 Reducer Coupling
One-piece design. Made from 3/4" PVC Schedule 40 DWV pipe. Clears clogged and slow running sinks, showers and tub drains. 1-1/2" slip joint x 1-1/4" solvent weld.
Oatey 42021 Replacement Round Snap-Tite Strainer Plumb Pak PP20946 J-Bend TAILPIECE FLANG 1-1/2ODX12 WHT
6-3/4" white plastic replacement strainer. Screws included.Carded. For P or S traps. Fits slip joint or direct connect tubes. Includes tailpiece with two nuts and washers.
WALL BEND PLASTIC 1-1/4X8 WHT Elkhart 83005 2-Hole Tube Strap B and K Industries C10-100HC Pipe Hook
For use in tubular sink drain applications. Contractor Pack - Bagged Copper plated water pipe supply hook.  Corrosion resistant, for indoor & outdoor use.  Nail point ends for easy drive-in use.
B and K V30-400HC Pipe Hangers HOOK J 10PK 1/2IN             Plumb Pak PP20555 Sink Drain Pipe Elbow With Reducing Washer
HOOK J 10PK 1/2IN
Our Price: $2.77
Vinyl coated galvanized steel DWV pipe hanger.  Locking screw keeps pipe secure.  Keyhole design provides faster installation.  Perforated holes allow for several hanging lengths. 1-1/2" x 1-1/2" with 1-1/2" x 1-1/4" reducing washer.
J-BEND TRAP SLIP 1-1/2IN WHIT TUBE ELBOW 1-1/2IN 90DEG WHT  Oatey 42758 Condensate Running Trap
For kitchen and bathroom sink drains. 1-1/2"  or 1-1/4" inlet. 90 degree. Provides a liquid seal between the home and sewer gasses. Includes elbow tube with two nuts and washers. 1-1/2" OD. One-piece design. Made from 3/4" PVC Schedule 40 DWV pipe
B and K G72-125HC Split Ring Hangers Plumb Pak PP20661 J-Bend American Valve P600U 3/4 PVC Fitting
B & K Ring Hanger, Split, 1-1/4 in Opening, Malleable Iron, Galvanized For P or S traps. For use in general piping applications,for Sch 40 metal and plastic pipe. Easy to operate for instant emergency piping. Piping must be restrained.
KBI SNX Snap-Fix Pipe Repair Coupling WALL TUBE PLASTC 1-1/2X7-3/4IN Worldwide Sourcing TC-15 Flexible Test Caps
NSF Standard 61 listed. Compact design. Unique positive snapping lock assures strong seal without the need to hold product in place. (Strong, fast and permanent). Meets/exceeds ASTM and ANSI standards. Made with high-impact PVC Type II Cell Class 15344-C. Carded. For use in tubular sink drain applications. For capping pipe ends. Convex face allows the cap to withstand greater pressure for testing purposes and minimizes ballooning. For temporary or permanent use. Can be use with any material. Suitable for underground use. Not for use on pressurized plumbing systems. Meets ASTM C-1173, C-1277, C1460, CISPI 310, IAPMO PS 109, PS90, & CSA B602.
B and K G72-150HC Split Ring Hangers Plumb Pak PP20557 Drain Pipe Elbow With Reducing Washer Plumb Pak PP20949 Wall Tube
B & K Ring Hanger, Split, 1-1/2 in Opening, Malleable Iron, Galvanized 1-1/2" x 1-1/2" with 1-1/2" x 1-1/4" reducing washer. Plumb Pak Wall Tube, 1-1/2 in Nominal, Plastic, White
TUBE EXTEN SLIP 1-1/2X12IN WHT Plumb Pak PP845-12 Drain Opener/Cleaner Oatey 43565 Snap-In Floor Drain
For kitchen and bathroom sink drains. Connects to either plastic or metal inlets. Unclogs sinks, showers and bathtub drains, built in cutting edge, round design to maneuver easily around obstacles, extra large hook for removal of gunk. Designed for drainage in areas where waterproofing membrane is not required.  Plastic Snap-In Drain can be solvent welded or inserted into Sch. 40 DWV pipe.  One piece design does not allow for removal of the cover.
GT Water DKMS Mini-Snake Drain Auger COUPLING SLIP JOINT 1-1/2 WHT HOOK J 10PK 3/4IN
HOOK J 10PK 3/4IN
Our Price: $3.12
Mini snake drain cleaner. Unclogs sinks, showers, bath drains, and urinals. Safe and easy-to-use. No chemicals and no need to remove drain covers. Insert mini snake in drain, rotate, then pull out debris. 2.50" W. (handle) x 0.25" D. x 26" L. (auger) Fits 1-1/2"  or 1-1/4" diameter inlet. Includes coupling with two nuts and washers.
Elkhart 83006 2-Hole Tube Strap P-TRAP SWIVEL SLIP 1-1/2 WHITE B and K Industries 160-203HC CPVC Fitting
Contractor Pack - Bagged For kitchen and bathroom sink drains. 1-1/2" diameter. Includes swivel P-trap with two nuts. CPVC body, nut, rubber gaskets, rated at 100 PSI up to 180 deg F. Pipe must be restrained after installation, Use in piping or repairs on copper or plastic pipe. NSF approved.
KBI SNX Snap-Fix Pipe Repair Coupling Oatey 43569 Snap-In Floor Drain B and K G72-200HC Split Ring Hangers
NSF Standard 61 listed. Compact design. Unique positive snapping lock assures strong seal without the need to hold product in place. (Strong, fast and permanent). Meets/exceeds ASTM and ANSI standards. Made with high-impact PVC Type II Cell Class 15344-C. Carded. Designed for drainage in areas where waterproofing membrane is not required.  Plastic Snap-In Drain can be solvent welded or inserted into Sch. 40 DWV pipe.  One piece design does not allow for removal of the cover. B & K Ring Hanger, Split, 2 in Opening, Malleable Iron, Galvanized
Plumb Pak PP905B Sink Tailpiece P-TRAP SLIP JOINT 1-1/4IN WHT PlumbPak PP20941 P-Trap
Plumb Pak Sink Tailpiece, 1-1/2 in Dia X 6 in Length, Flanged, PVC, Black For kitchen and bathroom sink drains. Includes P-trap with two nuts. For lavatory.
Fernco PQC-101 Qwik Caps Plumb Pak Flex N Fix PP21205 Flexible Extension Tube Plumb Pak PP40-8W Extension Tube
Easy way to cap pipe ends, clean-outs and open test pipes. Made of flexible PVC, they're suitable for above ground or underground use, on cast iron, steel, copper or plastic piping. Designed to fit all drain, waste, and vent pipe materials in a given nominal size. The convex face allows the cap to withstand greater pressure for testing purposes and minimizes ballooning. To install, simply place over open end of pipe and tighten to 60" pounds torque. Complies with ASTM D5926. Plumb Pak, Flex N Fix Extension Tube, Flexible, 1-1/4 in Dia X 9 in Length, Slip Joint, Plastic Plumb Pak Extension Tube, 1-1/2 in Dia X 8 in Length, Slip Joint, Plastic, White
WASTE ARM SLIP 1-1/2ODX7IN WHT Plumb Pak PP40-8B Extension Tube TEE END SLIPOUTLET 1-1/2IN WHT
Fits slip joint tubes. Includes waste arm with two nuts and washers. Plumb Pak Extension Tube, 1-1/2 in Dia X 8 in Length, Slip Joint, Plastic, Black Fits slip joint or direct connect tubes. Includes end outlet with three nuts and washers. 1-1/2" diameter.
Worldwide Sourcing NHC-150 No Hub Couplings Plumb Pak PP20906 Sink Tailpiece Plumb Pak PP855-8 Pipe Strap
Connects no-hub drain pipes of similar material. Can be used on cast iron, plastic and steel drain pipes. Suitable for use underground. Neoprene gasket. Meets ASTM C-1173, C1460-2000, C1277-97. Gasket meets ASTM C-0564. Plumb Pak Sink Tailpiece, 1-1/2 in Dia X 12 in Length, Flanged, PVC, White 3/4'" x 10'. For hanging pipes, fastening faucets and valves, repair jobs and more.
TUBE EXT SLIP-JOINT 1-1/4X12IN Genova 500 Tubing Strap Genova 500 Tubing Strap
For kitchen and bathroom sink drains. Connects to either plastic or metal inlets. Incorporates a special design which allows for pipe expansion, straps can be used on copper, CPVC and polybutylene tubing. Nails are not included. Incorporates a special design which allows for pipe expansion, straps can be used on copper, CPVC and polybutylene tubing. Nails are not included.
Plumb Pak PP10-4B Sink Tailpiece TAILPIECE DISHWASHR 1-1/2OD X8 Plumb Pak PP55-2W Extension Tube
Plumb Pak Sink Tailpiece, 1-1/2 in Dia X 4 in Length, Flanged, PVC, Black Fits direct connect tubes. 1-1/2" diameter x 8" length. Plumb Pak Extension Tube, 1-1/2 in Dia X 6 in Length, Slip Joint, Plastic, White
TAILPIECE DISHWASHER 1-1/2X8IN P-TRAP 1-1/2X1-1/2IN          Plumb Pak PP21250 Flex N Fix J-Bend
P-TRAP 1-1/2X1-1/2IN
Our Price: $3.53
Fits slip joint tubes. 1-1/2" diameter x 8" length. White polypropylene P- trap for kitchen. 1 1/2" inlet and outlet. Includes marvel connector for connection to SCH.40 stub out. All necessary nuts and washers are included. Adjustable Size: 1-1/2'' x 1-1/2'' or 1-1/2'' x 1-1/4''.
Worldwide Sourcing TC-2 Flexible Test Caps Plumb Pak PP20662 Sink Trap J-Bend Plumb Pak PP55-4W Straight Extension Sink Drain Coupling
For capping pipe ends. Convex face allows the cap to withstand greater pressure for testing purposes and minimizes ballooning. For temporary or permanent use. Can be use with any material. Suitable for underground use. Not for use on pressurized plumbing systems. Meets ASTM C-1173, C-1277, C1460, CISPI 310, IAPMO PS 109, PS90, & CSA B602. Outlet connects to 1-1/2" IPS cast elbow. Supplied with 1-1/2" and 1- 1/4" poly washers. With 1-1/2" x 1-1/4" reducing washers.
Plumb Pak PP66-13W Wall Tube Plumb Pak PP10-4W Sink Tailpiece TEE SLIP JOINT 1-1/2IN WHITE
Plumb Pak Wall Tube, 1-1/2 in Nominal, Plastic, White, For Kitchen Sink Plumb Pak Sink Tailpiece, 1-1/2 in Dia X 4 in Length, Flanged, PVC, White Fits 1-1/2"  or 1-1/4" diameter inlet. Includes tee with three nuts and washers.
Worldwide Sourcing FC56-1515 Flexible Couplings American Valve P230 1/2 PVC Fitting Flo Control QUIK-FIX Expansion Pipe Repair Coupling
Flexible pipe couplings are designed to replace standard SWV fittings. Suitable for use with cast iron, plastic, copper or steel. Suitable for use underground.  Not for use on pressurized plumbing systems. Meets ASTM C-1173, C-1277, C1460, CISPI 310, IAPMO PS 109, PS90, & CSA B602. AMERICAN Valve Pipe Tee, 1/2 in Nominal Size, Compression x Compression x NPT, 0.83 in Inside Dia, 1.85 in Outside Dia, 5 in Length, SCH 40, 150 psi at 73 deg F Working, PVC, 140 deg F Made of high-impact PVC Type II material in 1-piece cylinder to avoid leaks - no solvent weld necessary. Internal, high-quality, self-lubricating EDPM o-ring for long life and smooth movement. 150-psi pressure rated in all positions. Complies with all applicable ASTM and ANSI standards, NSF Approved.
PlumbPak PP20940 P-Trap Worldwide Sourcing NHC-22 No Hub Couplings KBI Flo Control ProGuard Tube To Pipe Adapter
For lavatory or kitchen connection to wall. Supplied with 1-1/2" and 1-1/4" poly washers. Connects no-hub drain pipes of similar material. Can be used on cast iron, plastic and steel drain pipes. Suitable for use underground. Neoprene gasket. Meets ASTM C-1173, C1460-2000, C1277-97. Gasket meets ASTM C-0564. KBI Tube To Pipe Adapter, Series: Flo Control, ProGuard, 1/2 in Nominal, Compression X MIPT End, SCH 40 Wall Thickness, 150 psi Working, PVC, Gray, 73 deg F, 1-1/2 in Length X 1-1/2 in Width X 5 in Height, IAPMO Certified, NSF Approved, UPC Compliant, For Irrigation, Pool and Spa Industries
Plumb Pak PP20556 3-Way Drain Coupling Tee With Reducing Washer Plumb Pak PP20669 Masterwaste Drain Tube Plumb Pak PP104AB Waste Arm
1-1/2" x 1-1/2" with 1-1/2" x 1-1/4" reducing washer. For use with end or center outlet tee. Plumb Pak Waste Arm, 1-1/2 in Dia X 15 in Length, Direct Connect, Plastic, Black
WASTE ARM SLIP 1-1/2ODX15INWHT PlumbPak PP20960 S-Trap Plumb Pak PP10-8W Sink Tailpiece
Fits slip joint tubes. Includes waste arm with two nuts and washers. For kitchen or lavatory. Supplied with 1-1/2" and 1-1/4" polywashers. 1-1/2" outlet connects to 1-1/4"O.D. or 1-1/2"O.D. tube size. Plumb Pak Sink Tailpiece, 1-1/2 in Dia X 8 in Length, Flanged, PVC, White
Flo Control QUIK-FIX Expansion Pipe Repair Coupling Plumb Pak PP906W Sink Tailpiece Plumb Pak PP55-2B Straight Extension Tube
Made of high-impact PVC Type II material in 1-piece cylinder to avoid leaks - no solvent weld necessary. Internal, high-quality, self-lubricating EDPM o-ring for long life and smooth movement. 150-psi pressure rated in all positions. Complies with all applicable ASTM and ANSI standards, NSF Approved. Plumb Pak Sink Tailpiece, 1-1/2 in Dia X 12 in Length, Flanged, PVC, White Plumb Pak Extension Tube, Straight, 1-1/2 in Dia X 6 in Length, Slip Joint, Plastic, Black
Plumb Pak PP20942 Wall Tube Plumb Pak PP10-8B Sink Tailpiece Plumb Pak PP66-1B J-Bend
Plumb Pak Wall Tube, 1-1/4 in Nominal, Plastic, White Plumb Pak Sink Tailpiece, 1-1/2 in Dia X 8 in Length, Flanged, PVC, Black For P or S traps.
Fernco PNH-150 Flexible Pipe Coupling Plumb Pak PP66-1W J-Bend Worldwide Sourcing TC-150 Drain Pipe Connectors
The No-Hub Coupling has a patented shield design that provides maximum transfer of pressure from the clamps to the gasket and pipe. Engineered to connect no-hub cast iron pipe in applications, replacing the less-efficient hub and spigot. Patented bi-directional shield design, specially beaded gasket, interlocking clamp design, and floating eyelet design. For P or S traps. Used to extend, alter or repair any combination of 1-1/4" or 1-1/2"  brass or plastic drain pipes. For above ground use only.
Plumb Pak PP855-68WH Dishwasher Air Gap Cap Worldwide Sourcing FC56-22 Flexible Couplings Plumb Pak PP20667 Center Outlet Tee and Tailpiece With Baffle
Plumb Pak Dishwasher Air Gap Cap, Plastic, White Flexible pipe couplings are designed to replace standard SWV fittings. Suitable for use with cast iron, plastic, copper or steel. Suitable for use underground.  Not for use on pressurized plumbing systems. Meets ASTM C-1173, C-1277, C1460, CISPI 310, IAPMO PS 109, PS90, & CSA B602. Plumb Pak Center Outlet Tee and Tailpiece, 1-1/2 in Nominal, Plastic, White
Fernco PQC-102 Qwik Caps Plumb Pak PP55-8W Reducer Coupling Plumb Pak PP55-5W Sink Drain Pipe Elbow With Reducing Washer
Easy way to cap pipe ends, clean-outs and open test pipes. Made of flexible PVC, they're suitable for above ground or underground use, on cast iron, steel, copper or plastic piping. Designed to fit all drain, waste, and vent pipe materials in a given nominal size. The convex face allows the cap to withstand greater pressure for testing purposes and minimizes ballooning. To install, simply place over open end of pipe and tighten to 60" pounds torque. Complies with ASTM D5926. 1-1/2" slip joint x 1-1/4" solvent weld. 1-1/2" x 1-1/2" with 1-1/2" x 1-1/4" reducing washer.
Plumb Pak PP101AW Waste Arm Plumb Pak PP55-11 Sink Drain Pipe Elbow With Captured Nut Plumb Pak PP42-8W Extension Tube
Plumb Pak Waste Arm, 1-1/2 in Dia X 7 in Length, Direct Connect, Plastic, White 1-1/2" for solvent weld connection with captured nut. Plumb Pak Extension Tube, 1-1/4 in Dia X 8 in Length, Slip Joint, Plastic, White
Plumb Pak PP999W Drain Pipe Adapter Plumb Pak PP66-15W Wall Tube Plumb Pak PP11-16W Sink Tailpiece
Plumb Pak Drain Pipe Adapter, 1-1/2 in Nominal, Solvent Weld X Compression End, Plastic Plumb Pak Wall Tube, 1-1/4 in Nominal, Plastic, White Plumb Pak Sink Tailpiece, 1-1/2 in Dia X 16 in Length, Double Flanged, Plastic, White
B&K P20-500HC Perforated Hanger Tape Oatey 33400 Mechanical Test Plug American Valve P600CTS 3/4 CPVC Fitting
Plastic strapping with perforated holes to be used for securing any size pipe.  Allows custom straps to be fabricated.  Easy to cut and lightweight. Plastic mechanical plug designed to hold higher pressures.  Used for plugging open ended piping as protection from dirt, dust, or debris. Maximum allowed air is 5 PSIG For use in general piping applications,using copper tube sized pipe. Easy to operate for instant emergency piping. Piping must be restrained
Plumb Pak PP906B Sink Tailpiece Plumb Pak PP855-68 Dishwasher Air Gap Cap B and K Industries 160-204HC CPVC Fitting
Plumb Pak Sink Tailpiece, 1-1/2 in Dia X 12 in Length, Flanged, PVC, Black Plumb Pak Dishwasher Air Gap Cap, Plastic, Chrome Plated CPVC body, nut, rubber gaskets, rated at 100 PSI up to 180 deg F. Pipe must be restrained after installation, Use in piping or repairs on copper or plastic pipe. NSF approved.
Plumb Pak PP104B Waste Arm Worldwide Sourcing NHC-33 No Hub Couplings Plumb Pak PP55-12W Extension Tube
Plumb Pak Waste Arm, 1-1/2 in Dia X 15 in Length, Slip Joint, Plastic, Black Connects no-hub drain pipes of similar material. Can be used on cast iron, plastic and steel drain pipes. Suitable for use underground. Neoprene gasket. Meets ASTM C-1173, C1460-2000, C1277-97. Gasket meets ASTM C-0564. Plumb Pak Extension Tube, 1-1/2 in Dia X 12 in Length, Slip Joint, Plastic, White
Fernco PNH-215 Pipe Reducing Coupling Plumb Pak PP55-7W Drain Pipe Elbow With Reducing Washer Plumb Pak PP910W Extension Tube
The No-Hub Coupling has a patented shield design that provides maximum transfer of pressure from the clamps to the gasket and pipe. Engineered to connect no-hub cast iron pipe in applications, replacing the less-efficient hub and spigot. Patented bi-directional shield design, specially beaded gasket, interlocking clamp design, and floating eyelet design. 1-1/2" x 1-1/2" with 1-1/2" x 1-1/4" reducing washer. Hang tag.
American Valve P230 3/4 PVC Fitting KBI SNX Snap-Fix Pipe Repair Coupling B and K 160-603 Pipe Repair Clamps
AMERICAN Valve Pipe Tee, 3/4 in Nominal Size, Compression x Compression x NPT, 1.04 in Inside Dia, 2.05 in Outside Dia, 5.2 in Length, SCH 40, 150 psi at 73 deg F Working, PVC, 140 deg F NSF Standard 61 listed. Compact design. Unique positive snapping lock assures strong seal without the need to hold product in place. (Strong, fast and permanent). Meets/exceeds ASTM and ANSI standards. Made with high-impact PVC Type II Cell Class 15344-C. Carded. Provides positive seal on leaking pipes, type 430 stainless steel, max operating temperature  - 167 degrees F. Rated up to 150 PSI.
KBI Flo Control ProGuard Tube To Pipe Adapter B and K Industries 160-602 Pipe Repair Clamp Worldwide Sourcing TC-3 Flexible TestCaps
KBI Tube To Pipe Adapter, Series: Flo Control, ProGuard, 3/4 in Nominal, Compression X MIPT End, SCH 40 Wall Thickness, 150 psi Working, PVC, Gray, 73 deg F, 2-1/2 in Length X 2-1/2 in Width X 5 in Height, IAPMO Certified, NSF Approved, UPC Compliant, For Irrigation, Pool and Spa Industries Provides positive seal on leaking pipes, type 430 stainless steel, max operating temperature  - 167 degrees F. Rated up to 150 PSI. For capping pipe ends. Convex face allows the cap to withstand greater pressure for testing purposes and minimizes ballooning. For temporary or permanent use. Can be use with any material. Suitable for underground use. Not for use on pressurized plumbing systems. Meets ASTM C-1173, C-1277, C1460, CISPI 310, IAPMO PS 109, PS90, & CSA B602.
Plumb Pak Flex N Fix PP21201 Flexible Sink Tailpiece Plumb Pak PP946W J-Bend Plumb Pak PP66-7W Center Outlet Tee and Tailpiece With Baffle
Plumb Pak, Flex N Fix Sink Tailpiece, Flexible, 1-1/2 in Dia X 12 in Length, Direct Connect, Plastic For P or S traps. Plumb Pak Center Outlet Tee and Tailpiece, 1-1/2 in Nominal, Plastic, White
Plumb Pak PP15-6W Sink Strainer Tailpiece With Captured Nut PlumbPak PP940W P-Trap Plumb Pak PP66-4W Dishwasher Branch Tailpiece
Plumb Pak Sink Strainer Tailpiece, 1-1/2 in Dia X 6 in Length, Threaded, Plastic For lavatory or kitchen connection to wall. Supplied with 1-1/2" and 1-1/4" poly washers. For use with hose or clamp.
Worldwide Sourcing FC56-215 Flexible Coupling American Valve P600U 1 PVC Fitting Genova 52105 Tube Hanger
Flexible pipe couplings are designed to replace standard SWV fittings. Suitable for use with cast iron, plastic, copper or steel. Suitable for use underground.  Not for use on pressurized plumbing systems. Meets ASTM C-1173, C-1277, C1460, CISPI 310, IAPMO PS 109, PS90, & CSA B602. For use in general piping applications,for Sch 40 metal and plastic pipe. Easy to operate for instant emergency piping. Piping must be restrained. Incorporates a special design which allows for pipe expansion. Can be used on copper as well as CPVC. Recommends using #6x1" screws which do not require a pre-drilling.
Genova 52107 Tube Hanger Worldwide Sourcing KJ-020 No Hub Coupling B&K C20-124HC Pipe Strap
Incorporates a special design which allows for pipe expansion. Can be used on copper as well as CPVC. Recommends using #6x1" screws which do not require a pre-drilling. Connects no-hub drain pipes of similar material. Can be used on cast iron, plastic and steel drain pipes. Suitable for use underground. Neoprene gasket. Meets ASTM C-1173, C1460-2000, C1277-97. Gasket meets ASTM C-0564. Copper plated 24 gauge strapping with perforated holes to be used for securing any size pipe.  Corrosion resistant, for indoor & outdoor use. Allows custom straps to be fabricated.
Plumb Pak PP66-7B Center Outlet Tee and Tailpiece With Baffle Plumb Pak PP21215 Double Sink Drain Coupling Plumb Pak PP101W Waste Arm
Plumb Pak Center Outlet Tee and Tailpiece, 1-1/2 in Nominal, Slip/Direct End, Plastic, Black, For Use With 1-1/2 X 8 In Hose and Clamp 1-1/2 x 1-1/2 or 1-1/4 x 1-1/4 Plumb Pak Waste Arm, 1-1/2 in Dia X 7 in Length, Slip Joint, Plastic, White
Plumb Pak PP944W Extension Tube Fernco PTC-150 Flexible Tube Coupling Plumb Pak PP55-12B Extension Tube