Home > PLUMBING > ROUGH PLUMBING SUPPLIES > PIPE INSULATION > INSULATION LENGTHS
Sort By:
1
Genova Products 80221 ABS-DWV Reducing Bushing Thermwell P10XB/6 Frost King Thermwell P11XB/6 Frost King
Inserts into fitting hub to reduce to smaller pipe size in drain-waste-vent applications. Conforms to ASTM D2661 and NSF-DWV. Accepted by FHA. Pre-slit to snap on quickly and easily. Black tubular polyethylene foam pipe insulation. Fits both copper and iron pipes. 3/8" Wall Thickness. Pre-slit to snap on quickly and easily. Black tubular polyethylene foam pipe insulation. Fits both copper and iron pipes. 3/8" Wall Thickness.
Plumb Pak PP20552 Extension Tube World Wide Sourcing B220 8 Black Pipe Malleable Coupling Plumb Pak PP20999 Drain Pipe Adapter
Plumb Pak Extension Tube, 1-1/2 in Dia X 6 in Length, Slip Joint, PVC, White WORLDWIDE SOURCING Pipe Coupling, 1/4 in Nominal Size, Threaded, Malleable Iron, Black Oxide Plumb Pak Drain Pipe Adapter, 1-1/2 in Nominal, Solvent Weld X Compression End, Plastic, White
Plumb Pak PP20944 Extension Tube World Wide Sourcing 18-1/4G Galvanized Malleable Cap World Wide Sourcing 18-3/8G Galvanized Malleable Cap
Plumb Pak Extension Tube, 1-1/4 in Dia X 6 in Length, Slip Joint, PVC, White Flat banded, right hand threads. Flat banded, right hand threads.
Worldwide Sourcing 21-1/2B Black Pipe Malleable Coupling World Wide Sourcing B220 10 Black Pipe  Malleable Coupling Worldwide Sourcing 18-1/2G Galvanized Pipe Malleable Cap
WORLDWIDE SOURCING Pipe Coupling, 1/2 in Nominal Size, Threaded, Malleable Iron, Black Oxide WORLDWIDE SOURCING Pipe Coupling, 3/8 in Nominal Size, Threaded, Malleable Iron, Black Oxide Flat banded, right hand threads.
Plumb Pak PP20554 Sink Drain Coupling TAILPIECE FLANGE 1-1/2ODX4 WHT World Wide Sourcing B220 6 Black Pipe Fitting
With 1-1/2" x 1-1/4" reducing washers. Fits slip joint or direct connect tubes. Includes tailpiece with two nuts and washers. WORLDWIDE SOURCING Pipe Coupling, 1/8 in Nominal Size, Threaded, Malleable Iron, Black Oxide
Worldwide Sourcing 21-1/2G Galvanized Pipe Malleable Coupling Worldwide Sourcing 21-1/4G Galvanized Pipe Malleable Coupling Worldwide Sourcing 2A-1/2G Galvanized Pipe 90 Degree Elbow
WORLDWIDE SOURCING Pipe Coupling, 1/2 in Nominal Size, Threaded, Malleable Iron, Galvanized WORLDWIDE SOURCING Pipe Coupling, 1/4 in Nominal Size, Threaded, Malleable Iron, Galvanized WORLDWIDE SOURCING Pipe Elbow, 1/2 in Nominal Size, Threaded, 90 deg, Malleable Iron, Galvanized
World Wide Sourcing 18-1/8G Galvanized  Malleable Cap Oatey 43561 Snap-In Floor Drain World Wide Sourcing 21-1/8G Galvanized Malleable Coupling
Flat banded, right hand threads. Designed for drainage in areas where waterproofing membrane is not required.  Plastic Snap-In Drain can be solvent welded or inserted into Sch. 40 DWV pipe.  One piece design does not allow for removal of the cover. WORLDWIDE SOURCING Pipe Coupling, 1/8 in Nominal Size, Threaded, Malleable Iron, Galvanized
TAILPIECE FLANGE 1-1/2ODX6 WHT World Wide Sourcing 3/8GM Galvanized Malleable Coupling Plumb Pak PP205512 Extension Tube
Fits slip joint or direct connect tubes. Includes tailpiece with two nuts and washers. WORLDWIDE SOURCING Pipe Coupling, 3/8 in Nominal Size, Threaded, Malleable Iron, Galvanized Plumb Pak Extension Tube, 1-1/2 in Dia X 12 in Length, Slip Joint, Plastic, White
Worldwide Sourcing 21-3/4B Black Pipe Malleable Coupling Tundra Plus PR38138UW Pipe Insulation Plumb Pak PP20668 Master End Outlet Tee and Tailpiece With Baffle
WORLDWIDE SOURCING Pipe Coupling, 3/4 in Nominal Size, Threaded, Malleable Iron, Black Oxide Closed cell polyethylene foam. More thermally efficient. Cuts heat loss and stops pipe sweating. Helps stop freeze-ups. Contains flame retardants. Cut with scissors. Plumb Pak Master End Outlet Tee and Tailpiece, 1-1/2 in Nominal, Slip/Direct End, Plastic, White
Worldwide Sourcing 18-3/4G Galvanized Pipe Malleable Cap Plumb Pak PP20664 Master Dishwasher Tailpiece M-D Building Products 50162 Tube Pipe Insulation
Flat banded, right hand threads. For use with hose or clamp. Blocks heat loss or gain to save energy. Use on hot or cold pipes. Stops condensation on cold pipes to prevent water damage. Pre-cut, self sealing slits for easy application
Plumb Pak PP20945 Extension Tube Oatey 43560 Snap-In Drain Worldwide Sourcing 21-3/4G Galvanized Pipe Malleable Coupling
Plumb Pak Extension Tube, 1-1/4 in Dia X 12 in Length, Slip Joint, PVC, White Designed for drainage in areas where waterproofing membrane is not required.  Plastic Snap-In Drain can be solvent welded or inserted into Sch. 40 DWV pipe.  One piece design does not allow for removal of the cover. WORLDWIDE SOURCING Pipe Coupling, 3/4 in Nominal Size, Threaded, Malleable Iron, Galvanized
World Wide Sourcing 2A-1/4G Galvanized 90 Deg Elbow World Wide Sourcing 2A-3/8G Galvanized 90 Deg Elbow Plumb Pak PP20905 Sink Tailpiece
WORLDWIDE SOURCING Pipe Elbow, 1/4 in Nominal Size, Threaded, 90 deg, Malleable Iron, Galvanized WORLDWIDE SOURCING Pipe Elbow, 3/8 in Nominal Size, Threaded, 90 deg, Malleable Iron, Galvanized Plumb Pak Sink Tailpiece, 1-1/2 in Dia X 6 in Length, Flanged, PVC, White
TUBE EXTEN SLIP 1-1/2X6IN WHT P-TRAP SLIP JOINT 1-1/2IN WHT TEE CENTER OUTLET 1-1/2IN WHT
For kitchen and bathroom sink drains. Connects to either plastic or metal inlets. For kitchen and bathroom sink drains. Includes P-trap with two nuts. Fits slip joint tubes. Includes center outlet with two nuts and washers. 1-1/2" diameter.
Oatey 42757 Condensate P-Trap Genova 80232 ABS-DWV Fitting TRAP ADAPTER 1-1/2IN WHITE
One-piece design. Made from 3/4" PVC Schedule 40 DWV pipe. Inserts into fitting hub to reduce to smaller pipe size in drain-waste-vent applications. Conforms to ASTM D2661 and NSF-DWV. Accepted by FHA. Fits slip joint tubes. Includes trap adapter with on nut and washer. 1-1/2" diameter.
Plumb Pak PP905W Sink Tailpiece Worldwide Sourcing 6-1/4G Galvanized Pipe 90 Degree Elbow Worldwide Sourcing 6-1/2G Galvanized Pipe 90 Degree Elbow
Plumb Pak Sink Tailpiece, 1-1/2 in Dia X 6 in Length, Flanged, PVC, White, For Kitchen Use WORLDWIDE SOURCING Pipe Street Elbow, 1/4 in Nominal Size, Threaded, 90 deg, Malleable Iron, Galvanized WORLDWIDE SOURCING Pipe Street Elbow, 1/2 in Nominal Size, Threaded, 90 deg, Malleable Iron, Galvanized
Worldwide Sourcing 2A-3/4G Galvanized Pipe 90 Degree Elbow Plumb Pak PP20558 Reducer Coupling Oatey 42021 Replacement Round Snap-Tite Strainer
WORLDWIDE SOURCING Pipe Elbow, 3/4 in Nominal Size, Threaded, 90 deg, Malleable Iron, Galvanized 1-1/2" slip joint x 1-1/4" solvent weld. 6-3/4" white plastic replacement strainer. Screws included.Carded.
Plumb Pak PP20946 J-Bend WALL BEND PLASTIC 1-1/4X8 WHT World Wide Sourcing 18-1G Galv. Pipe Fitting
For P or S traps. For use in tubular sink drain applications. Flat banded, right hand threads.
Plumb Pak PP20555 Sink Drain Pipe Elbow With Reducing Washer J-BEND TRAP SLIP 1-1/2IN WHIT Oatey 42758 Condensate Running Trap
1-1/2" x 1-1/2" with 1-1/2" x 1-1/4" reducing washer. For kitchen and bathroom sink drains. 1-1/2"  or 1-1/4" inlet. One-piece design. Made from 3/4" PVC Schedule 40 DWV pipe
TAILPIECE FLANG 1-1/2ODX12 WHT World Wide Sourcing 6-3/8G Galvanized 90 Deg St Elbow Plumb Pak PP20661 J-Bend
Fits slip joint or direct connect tubes. Includes tailpiece with two nuts and washers. WORLDWIDE SOURCING Pipe Street Elbow, 3/8 in Nominal Size, Threaded, 90 deg, Malleable Iron, Galvanized For P or S traps.
World Wide Sourcing 1 BM Black Pipe Malleable Coupling WALL TUBE PLASTC 1-1/2X7-3/4IN TUBE ELBOW 1-1/2IN 90DEG WHT
WORLDWIDE SOURCING Pipe Coupling, 1 in Nominal Size, Threaded, Malleable Iron, Black Oxide For use in tubular sink drain applications. 90 degree. Provides a liquid seal between the home and sewer gasses. Includes elbow tube with two nuts and washers. 1-1/2" OD.
World Wide Sourcing 2A-1/8G Galvanized 90 Deg Elbow Plumb Pak PP20557 Drain Pipe Elbow With Reducing Washer Plumb Pak PP20949 Wall Tube
WORLDWIDE SOURCING Pipe Elbow, 1/8 in Nominal Size, Threaded, 90 deg, Malleable Iron, Galvanized 1-1/2" x 1-1/2" with 1-1/2" x 1-1/4" reducing washer. Plumb Pak Wall Tube, 1-1/2 in Nominal, Plastic, White
Genova 80231 ABS-DWV Fitting Plumb Pak PP845-12 Drain Opener/Cleaner Oatey 43565 Snap-In Floor Drain
Inserts into fitting hub to reduce to smaller pipe size in drain-waste-vent applications. Conforms to ASTM D2661 and NSF-DWV. Accepted by FHA. Unclogs sinks, showers and bathtub drains, built in cutting edge, round design to maneuver easily around obstacles, extra large hook for removal of gunk. Designed for drainage in areas where waterproofing membrane is not required.  Plastic Snap-In Drain can be solvent welded or inserted into Sch. 40 DWV pipe.  One piece design does not allow for removal of the cover.
GT Water DKMS Mini-Snake Drain Auger P-TRAP SWIVEL SLIP 1-1/2 WHITE Oatey 43569 Snap-In Floor Drain
Mini snake drain cleaner. Unclogs sinks, showers, bath drains, and urinals. Safe and easy-to-use. No chemicals and no need to remove drain covers. Insert mini snake in drain, rotate, then pull out debris. 2.50" W. (handle) x 0.25" D. x 26" L. (auger) For kitchen and bathroom sink drains. 1-1/2" diameter. Includes swivel P-trap with two nuts. Designed for drainage in areas where waterproofing membrane is not required.  Plastic Snap-In Drain can be solvent welded or inserted into Sch. 40 DWV pipe.  One piece design does not allow for removal of the cover.
Plumb Pak PP905B Sink Tailpiece TUBE EXTEN SLIP 1-1/2X12IN WHT Worldwide Sourcing 6-3/4G Galvanized Pipe 90 Degree Elbow
Plumb Pak Sink Tailpiece, 1-1/2 in Dia X 6 in Length, Flanged, PVC, Black For kitchen and bathroom sink drains. Connects to either plastic or metal inlets. WORLDWIDE SOURCING Pipe Street Elbow, 3/4 in Nominal Size, Threaded, 90 deg, Malleable Iron, Galvanized
P-TRAP SLIP JOINT 1-1/4IN WHT PlumbPak PP20941 P-Trap COUPLING SLIP JOINT 1-1/2 WHT
For kitchen and bathroom sink drains. Includes P-trap with two nuts. For lavatory. Fits 1-1/2"  or 1-1/4" diameter inlet. Includes coupling with two nuts and washers.
Plumb Pak PP40-8W Extension Tube Plumb Pak PP40-8B Extension Tube Worldwide Sourcing NHC-150 No Hub Couplings
Plumb Pak Extension Tube, 1-1/2 in Dia X 8 in Length, Slip Joint, Plastic, White Plumb Pak Extension Tube, 1-1/2 in Dia X 8 in Length, Slip Joint, Plastic, Black Connects no-hub drain pipes of similar material. Can be used on cast iron, plastic and steel drain pipes. Suitable for use underground. Neoprene gasket. Meets ASTM C-1173, C1460-2000, C1277-97. Gasket meets ASTM C-0564.
Plumb Pak PP20906 Sink Tailpiece World Wide Sourcing 6-1/8G Galvanized 90 Deg St Elbow Plumb Pak PP10-4B Sink Tailpiece
Plumb Pak Sink Tailpiece, 1-1/2 in Dia X 12 in Length, Flanged, PVC, White WORLDWIDE SOURCING Pipe Street Elbow, 1/8 in Nominal Size, Threaded, 90 deg, Malleable Iron, Galvanized Plumb Pak Sink Tailpiece, 1-1/2 in Dia X 4 in Length, Flanged, PVC, Black
Plumb Pak PP55-2W Extension Tube P-TRAP 1-1/2X1-1/2IN          World Wide Sourcing PPG130R-15X10 Galv. Pipe Fitting
P-TRAP 1-1/2X1-1/2IN
Our Price: $3.53
Plumb Pak Extension Tube, 1-1/2 in Dia X 6 in Length, Slip Joint, Plastic, White White polypropylene P- trap for kitchen. 1 1/2" inlet and outlet. Includes marvel connector for connection to SCH.40 stub out. All necessary nuts and washers are included. Flat banded, right hand threads.
Plumb Pak PP20662 Sink Trap J-Bend Plumb Pak PP55-4W Straight Extension Sink Drain Coupling Plumb Pak PP66-13W Wall Tube
Outlet connects to 1-1/2" IPS cast elbow. Supplied with 1-1/2" and 1- 1/4" poly washers. With 1-1/2" x 1-1/4" reducing washers. Plumb Pak Wall Tube, 1-1/2 in Nominal, Plastic, White, For Kitchen Sink
Plumb Pak PP10-4W Sink Tailpiece Worldwide Sourcing FC56-1515 Flexible Couplings WASTE ARM SLIP 1-1/2ODX7IN WHT
Plumb Pak Sink Tailpiece, 1-1/2 in Dia X 4 in Length, Flanged, PVC, White Flexible pipe couplings are designed to replace standard SWV fittings. Suitable for use with cast iron, plastic, copper or steel. Suitable for use underground.  Not for use on pressurized plumbing systems. Meets ASTM C-1173, C-1277, C1460, CISPI 310, IAPMO PS 109, PS90, & CSA B602. Fits slip joint tubes. Includes waste arm with two nuts and washers.
TEE END SLIPOUTLET 1-1/2IN WHT PlumbPak PP20940 P-Trap Worldwide Sourcing NHC-22 No Hub Couplings
Fits slip joint or direct connect tubes. Includes end outlet with three nuts and washers. 1-1/2" diameter. For lavatory or kitchen connection to wall. Supplied with 1-1/2" and 1-1/4" poly washers. Connects no-hub drain pipes of similar material. Can be used on cast iron, plastic and steel drain pipes. Suitable for use underground. Neoprene gasket. Meets ASTM C-1173, C1460-2000, C1277-97. Gasket meets ASTM C-0564.
TUBE EXT SLIP-JOINT 1-1/4X12IN Plumb Pak PP20556 3-Way Drain Coupling Tee With Reducing Washer Plumb Pak PP20669 Masterwaste Drain Tube
For kitchen and bathroom sink drains. Connects to either plastic or metal inlets. 1-1/2" x 1-1/2" with 1-1/2" x 1-1/4" reducing washer. For use with end or center outlet tee.
TAILPIECE DISHWASHR 1-1/2OD X8 Plumb Pak PP104AB Waste Arm Plumb Pak Flex N Fix PP21205 Flexible Extension Tube
Fits direct connect tubes. 1-1/2" diameter x 8" length. Plumb Pak Waste Arm, 1-1/2 in Dia X 15 in Length, Direct Connect, Plastic, Black Plumb Pak, Flex N Fix Extension Tube, Flexible, 1-1/4 in Dia X 9 in Length, Slip Joint, Plastic
PlumbPak PP20960 S-Trap M-D 50140 Pipe Insulation TAILPIECE DISHWASHER 1-1/2X8IN
For kitchen or lavatory. Supplied with 1-1/2" and 1-1/4" polywashers. 1-1/2" outlet connects to 1-1/4"O.D. or 1-1/2"O.D. tube size. Blocks heat loss or gain to save energy. Use on hot or cold pipes. Stops condensation on cold pipes to prevent water damage. Size is listed for copper pipe. Subtract appropriate amount for Iron or PVC usage (1/8"-1/4"). Fits slip joint tubes. 1-1/2" diameter x 8" length.
Plumb Pak PP10-8W Sink Tailpiece Worldwide Sourcing 2A-1G Galvanized Pipe 90 Degree Elbow Plumb Pak PP906W Sink Tailpiece
Plumb Pak Sink Tailpiece, 1-1/2 in Dia X 8 in Length, Flanged, PVC, White WORLDWIDE SOURCING Pipe Elbow, 1 in Nominal Size, Threaded, 90 deg, Malleable Iron, Galvanized Plumb Pak Sink Tailpiece, 1-1/2 in Dia X 12 in Length, Flanged, PVC, White
World Wide Sourcing 11A3/4X3/4X1/2G Galvanized Tee Plumb Pak PP55-2B Straight Extension Tube Plumb Pak PP20942 Wall Tube
Flat banded, right hand threads. Plumb Pak Extension Tube, Straight, 1-1/2 in Dia X 6 in Length, Slip Joint, Plastic, Black Plumb Pak Wall Tube, 1-1/4 in Nominal, Plastic, White
Plumb Pak PP10-8B Sink Tailpiece TEE SLIP JOINT 1-1/2IN WHITE  Plumb Pak PP66-1B J-Bend
Plumb Pak Sink Tailpiece, 1-1/2 in Dia X 8 in Length, Flanged, PVC, Black Fits 1-1/2"  or 1-1/4" diameter inlet. Includes tee with three nuts and washers. For P or S traps.
Fernco PNH-150 Flexible Pipe Coupling Plumb Pak PP66-1W J-Bend World Wide Sourcing 21-1G Galv. Pipe Fitting
The No-Hub Coupling has a patented shield design that provides maximum transfer of pressure from the clamps to the gasket and pipe. Engineered to connect no-hub cast iron pipe in applications, replacing the less-efficient hub and spigot. Patented bi-directional shield design, specially beaded gasket, interlocking clamp design, and floating eyelet design. For P or S traps. WORLDWIDE SOURCING Pipe Coupling, 1 in Nominal Size, Threaded, Malleable Iron, Galvanized
World Wide Sourcing PPG130R-20X15X15 Galv Pipe Fitting World Wide Sourcing PPG130R-20X15X20 Galv Pipe Fitting Worldwide Sourcing TC-150 Drain Pipe Connectors
Flat banded, right hand threads. Flat banded, right hand threads. Used to extend, alter or repair any combination of 1-1/4" or 1-1/2"  brass or plastic drain pipes. For above ground use only.
World Wide Sourcing 18-1-1/4G Galvanized  Malleable Cap Plumb Pak PP855-68WH Dishwasher Air Gap Cap Worldwide Sourcing FC56-22 Flexible Couplings
Flat banded, right hand threads. Plumb Pak Dishwasher Air Gap Cap, Plastic, White Flexible pipe couplings are designed to replace standard SWV fittings. Suitable for use with cast iron, plastic, copper or steel. Suitable for use underground.  Not for use on pressurized plumbing systems. Meets ASTM C-1173, C-1277, C1460, CISPI 310, IAPMO PS 109, PS90, & CSA B602.
Plumb Pak PP20667 Center Outlet Tee and Tailpiece With Baffle Plumb Pak PP55-8W Reducer Coupling Plumb Pak PP55-5W Sink Drain Pipe Elbow With Reducing Washer
Plumb Pak Center Outlet Tee and Tailpiece, 1-1/2 in Nominal, Plastic, White 1-1/2" slip joint x 1-1/4" solvent weld. 1-1/2" x 1-1/2" with 1-1/2" x 1-1/4" reducing washer.
Plumb Pak PP101AW Waste Arm Plumb Pak PP55-11 Sink Drain Pipe Elbow With Captured Nut Plumb Pak PP21250 Flex N Fix J-Bend
Plumb Pak Waste Arm, 1-1/2 in Dia X 7 in Length, Direct Connect, Plastic, White 1-1/2" for solvent weld connection with captured nut. Adjustable Size: 1-1/2'' x 1-1/2'' or 1-1/2'' x 1-1/4''.
Plumb Pak PP42-8W Extension Tube Plumb Pak PP999W Drain Pipe Adapter Plumb Pak PP66-15W Wall Tube
Plumb Pak Extension Tube, 1-1/4 in Dia X 8 in Length, Slip Joint, Plastic, White Plumb Pak Drain Pipe Adapter, 1-1/2 in Nominal, Solvent Weld X Compression End, Plastic Plumb Pak Wall Tube, 1-1/4 in Nominal, Plastic, White
Plumb Pak PP11-16W Sink Tailpiece WASTE ARM SLIP 1-1/2ODX15INWHT Plumb Pak PP906B Sink Tailpiece
Plumb Pak Sink Tailpiece, 1-1/2 in Dia X 16 in Length, Double Flanged, Plastic, White Fits slip joint tubes. Includes waste arm with two nuts and washers. Plumb Pak Sink Tailpiece, 1-1/2 in Dia X 12 in Length, Flanged, PVC, Black
Plumb Pak PP855-68 Dishwasher Air Gap Cap Plumb Pak PP104B Waste Arm Worldwide Sourcing NHC-33 No Hub Couplings
Plumb Pak Dishwasher Air Gap Cap, Plastic, Chrome Plated Plumb Pak Waste Arm, 1-1/2 in Dia X 15 in Length, Slip Joint, Plastic, Black Connects no-hub drain pipes of similar material. Can be used on cast iron, plastic and steel drain pipes. Suitable for use underground. Neoprene gasket. Meets ASTM C-1173, C1460-2000, C1277-97. Gasket meets ASTM C-0564.
Plumb Pak PP55-12W Extension Tube Fernco PNH-215 Pipe Reducing Coupling Plumb Pak PP55-7W Drain Pipe Elbow With Reducing Washer
Plumb Pak Extension Tube, 1-1/2 in Dia X 12 in Length, Slip Joint, Plastic, White The No-Hub Coupling has a patented shield design that provides maximum transfer of pressure from the clamps to the gasket and pipe. Engineered to connect no-hub cast iron pipe in applications, replacing the less-efficient hub and spigot. Patented bi-directional shield design, specially beaded gasket, interlocking clamp design, and floating eyelet design. 1-1/2" x 1-1/2" with 1-1/2" x 1-1/4" reducing washer.
Plumb Pak PP910W Extension Tube M-D 50142 Pipe Insulation Fernco PTC-150 Flexible Tube Coupling
Hang tag. Blocks heat loss or gain to save energy. Use on hot or cold pipes. Stops condensation on cold pipes to prevent water damage. Size is listed for copper pipe. Subtract appropriate amount for Iron or PVC usage (1/8"-1/4"). Quick, easy way to extend, alter or repair any combination of 1-1/2" or 1-1/4" brass or plastic drain pipe. Whether connecting brass or plastic, the PVC material is is formulated to provide a reliable connection that can be installedin minutes. Carded.
World Wide Sourcing B220 32 Black  Malleable Coupling Plumb Pak PP946W J-Bend Plumb Pak PP66-7W Center Outlet Tee and Tailpiece With Baffle
WORLDWIDE SOURCING Pipe Coupling, 1-1/4 in Nominal Size, Threaded, Malleable Iron, Black Oxide For P or S traps. Plumb Pak Center Outlet Tee and Tailpiece, 1-1/2 in Nominal, Plastic, White
PlumbPak PP940W P-Trap Plumb Pak PP66-4W Dishwasher Branch Tailpiece Worldwide Sourcing FC56-215 Flexible Coupling
For lavatory or kitchen connection to wall. Supplied with 1-1/2" and 1-1/4" poly washers. For use with hose or clamp. Flexible pipe couplings are designed to replace standard SWV fittings. Suitable for use with cast iron, plastic, copper or steel. Suitable for use underground.  Not for use on pressurized plumbing systems. Meets ASTM C-1173, C-1277, C1460, CISPI 310, IAPMO PS 109, PS90, & CSA B602.
Plumb Pak PP15-6W Sink Strainer Tailpiece With Captured Nut Worldwide Sourcing KJ-020 No Hub Coupling Plumb Pak PP101W Waste Arm
Plumb Pak Sink Strainer Tailpiece, 1-1/2 in Dia X 6 in Length, Threaded, Plastic Connects no-hub drain pipes of similar material. Can be used on cast iron, plastic and steel drain pipes. Suitable for use underground. Neoprene gasket. Meets ASTM C-1173, C1460-2000, C1277-97. Gasket meets ASTM C-0564. Plumb Pak Waste Arm, 1-1/2 in Dia X 7 in Length, Slip Joint, Plastic, White
Plumb Pak PP944W Extension Tube Plumb Pak PP55-12B Extension Tube Plumb Pak PP66-2W Sink Trap J-Bend
Plumb Pak Extension Tube, 1-1/4 in Dia X 6 in Length, Slip Joint, Plastic, White Plumb Pak Extension Tube, 1-1/2 in Dia X 12 in Length, Slip Joint, Plastic, Black Outlet connects to 1-1/2" IPS cast elbow. Supplied with 1-1/2" and 1- 1/4" poly washers.
Cobra Zip-It 00400 Drain Clean Tool Worldwide Sourcing FC56-15125 Flexible Couplings Fernco PNH-33 Flexible Pipe Coupling
Clears clogged and slow running sinks, showers and tub drains. Flexible pipe couplings are designed to replace standard SWV fittings. Suitable for use with cast iron, plastic, copper or steel. Suitable for use underground.  Not for use on pressurized plumbing systems. Meets ASTM C-1173, C-1277, C1460, CISPI 310, IAPMO PS 109, PS90, & CSA B602. The No-Hub Coupling has a patented shield design that provides maximum transfer of pressure from the clamps to the gasket and pipe. Engineered to connect no-hub cast iron pipe in applications, replacing the less-efficient hub and spigot. Patented bi-directional shield design, specially beaded gasket, interlocking clamp design, and floating eyelet design.
PlumbPak PP20943 S-Trap Worldwide Sourcing 6-1G Galvanized Pipe 90 Degree Elbow Fernco PDTC150 Drain and Trap Connectors
For lavatory. WORLDWIDE SOURCING Pipe Street Elbow, 1 in Nominal Size, Threaded, 90 deg, Malleable Iron, Galvanized Connects to 1-1/2" or 1-1/4" tubular traps to all common drain piping. UsePDTCF-150 for 2" copper. Easy installation. Rustproof clamps. Carded. Fits cast iron, plastic, copper, steel or lead pipe. Extra length for tee connections. NOTE: Not recommended for underground connections. For drain waste and vent use only.  Do not use in pressure applications. Adapts to other pipe sizes with Qwik Bushings.
Plumb Pak PP20930 Center Waste Outlet With Baffle Tee World Wide Sourcing 21-1 1/4G Galv. Pipe Fitting Worldwide Sourcing NHC-44 No Hub Couplings
C to C with baffle tee. WORLDWIDE SOURCING Pipe Coupling, 1-1/4 in Nominal Size, Threaded, Malleable Iron, Galvanized Connects no-hub drain pipes of similar material. Can be used on cast iron, plastic and steel drain pipes. Suitable for use underground. Neoprene gasket. Meets ASTM C-1173, C1460-2000, C1277-97. Gasket meets ASTM C-0564.
Plumb Pak Flex N Fix PP21201 Flexible Sink Tailpiece Plumb Pak PP911W Extension Tube World Wide Sourcing 18-1-1/2G Galv. Pipe Fitting
Plumb Pak, Flex N Fix Sink Tailpiece, Flexible, 1-1/2 in Dia X 12 in Length, Direct Connect, Plastic Hang tag. Flat banded, right hand threads.
Plumb Pak PP41-16W Extension Tube PlumbPak PP20950 S-Trap Fernco PNH-22 Flexible Pipe Coupling
Hang tag. Solvent weld connects to 1-1/2" schedule 40 outlet for kitchen or lavatory. The No-Hub Coupling has a patented shield design that provides maximum transfer of pressure from the clamps to the gasket and pipe. Engineered to connect no-hub cast iron pipe in applications, replacing the less-efficient hub and spigot. Patented bi-directional shield design, specially beaded gasket, interlocking clamp design, and floating eyelet design.
M-D Building 50144 Pipe Insulation Fernco 1056 Flexible Pipe Stock Coupling PlumbPak PP941W P-Trap
Blocks heat loss or gain to save energy. Use on hot or cold pipes. Stops condensation on cold pipes to prevent water damage. Size is listed for copper pipe. Subtract appropriate amount for Iron or PVC usage (1/8"-1/4"). Series 1056 designed for cast iron, plastic, copper, steel, or lead to cast iron, plastic, copper, steel, or lead For lavatory.
Plumb Pak PP66-8W Master End Outlet Tee and Tailpiece With Baffle TAILPIECE EXT FLEX 1-1/2X12IN TAILPIECE EXT FLEX 1-1/4 X 9IN
Plumb Pak Master End Outlet Tee and Tailpiece, 1-1/2 in Nominal, Slip/Direct End, Plastic, White For kitchen and bathroom sinks drains. Connects to either plastic or metal inlets:Includes tailpiece extension with high-line captured nut. Flexibility allows for offset connections up to 2 inches. For kitchen and bathroom sinks drains. Connects to either plastic or metal inlets:Includes tailpiece extension with high-line captured nut. Flexibility allows for offset connections up to 2 inches.
Plumb Pak PP21215 Double Sink Drain Coupling Worldwide Sourcing 22U-205 Flexible Donut Plumb Pak PP66-10W Drain Pipe Elbow
1-1/2 x 1-1/2 or 1-1/4 x 1-1/4 Pipe hub donuts for compression sealing of sewer pipe joints and DWV connections such as sockets, bells, hubs and spigots. Not for use on pressurized plumbing systems. Meets ASTM C-1173, C-1277, C1460, CISPI 310, IAPMO PS 109, PS90, & CSA B602. 1-1/2" I.P.S. threaded outlet elbow. For use with washing machine drain connection or J bend. Carded.
Worldwide Sourcing 22U-139 Flexible Donut Fernco PDTC215 Drain and Trap Connectors Fernco P22U-139 Compression Reducing Donut
Pipe hub donuts for compression sealing of sewer pipe joints and DWV connections such as sockets, bells, hubs and spigots. Not for use on pressurized plumbing systems. Meets ASTM C-1173, C-1277, C1460, CISPI 310, IAPMO PS 109, PS90, & CSA B602. Connects to 1-1/2" or 1-1/4" tubular traps to all common drain piping. UsePDTCF-150 for 2" copper. Easy installation. Rustproof clamps. Carded. Fits cast iron, plastic, copper, steel or lead pipe. Extra length for tee connections. NOTE: Not recommended for underground connections. For drain waste and vent use only.  Do not use in pressure applications. Adapts to other pipe sizes with Qwik Bushings. Seal against infiltration and exfiltration. Approved by SBCCI, BOCA and UPC. Conforms to applicable parts of ASTM C443, C425, C564, and D1869. Connects SV CI Hub to Sch. 40 DWV plastic.
Worldwide Sourcing KJ-005 No Hub Couplings Plumb Pak PP66-14W Master Dishwasher Tailpiece Worldwide Sourcing KJ-009 No Hub Couplings
Connects no-hub drain pipes on any combination of plastic, steel or extra-heavy cast iron pipes. Series 300 stainless steel shield and neoprene gasket. Not recommended for underground use. Meets ASTM C-1173, C1460-2000, C1277-97. Gasket meets ASTM C-0564. For use with hose or clamp. Connects no-hub drain pipes on any combination of plastic, steel or extra-heavy cast iron pipes. Series 300 stainless steel shield and neoprene gasket. Not recommended for underground use. Meets ASTM C-1173, C1460-2000, C1277-97. Gasket meets ASTM C-0564.
Fernco PNH-44 Flexible Pipe Coupling Plumb Pak PP55-6W 3-Way Drain Coupling Tee With Reducing Washer Oatey 43579 Straight Floor Drain
The No-Hub Coupling has a patented shield design that provides maximum transfer of pressure from the clamps to the gasket and pipe. Engineered to connect no-hub cast iron pipe in applications, replacing the less-efficient hub and spigot. Patented bi-directional shield design, specially beaded gasket, interlocking clamp design, and floating eyelet design. 1-1/2" x 1-1/2" with 1-1/2" x 1-1/4" reducing washer. Oatey Floor Drain, General Purpose, Straight, PVC, Oatey, 2 X 3 in Connection, Solvent Weld Connection, Suitable For Use With: Over 2 in or Inside 3 in SCH 40 DWV Pipe, 4 in Strainer, Stainless Steel Strainer, 2.685 in Overall Height, 4.3 in Overall Width, White, Includes: Screw-Tite Strainer, IAPMO Listed, NES 653, ISO 9001 Certified
P-TRAP PVC 1-1/2X1-1/2IN      Fernco 1056 Flexible Pipe Stock Coupling TAILPIECE EXT FLEX1-1/2X11-1/2
White PVC P Trap with 1-1/2"inlet and outlet. Compression or solvent weld connection using supplied marvel connector to sch 40. Series 1056 designed for cast iron, plastic, copper, steel, or lead to cast iron, plastic, copper, steel, or lead For kitchen and bathroom sinks drains. Connects to either plastic or metal inlets:Includes tailpiece extension with high-line captured nut. Flexibility allows for offset connections up to 2 inches.
PlumbPak PP21240 Adjustable P-Trap Plumb Pak PP66-14B Dishwasher Branch Tailpiece Plumb Pak PP945W Extension Tube
For kitchen or lavatory. 1-1/2" x 1-1/2" or 1-1/2" x 1-1/4". For use with hose or clamp. Plumb Pak Extension Tube, 1-1/4 in Dia X 12 in Length, Slip Joint, Plastic, White
Plumb Pak PP66-9W Masterwaste Drain Tube Worldwide Sourcing 27-1/2G Galvanized Pipe Malleable Floor Flange Worldwide Sourcing DTC-150 Drain Pipe Connectors
For use with end or center outlet tee. Countersunk screw holes, not faced. Flat banded, right hand threads. Connects 1-1/4" or 1-1/2" common drain traps to plastic, steel, cast iron or copper drain pipe. For above ground use only.
Superior Tool 03819 Drainstick Drain Stick Plumb Pak PP66-11B Waste Arm Worldwide Sourcing FT-150 Flexible Trap
Quickly and easily removes hair and "goop" between drain and end of trap. Rust resistant nylon construction is tough and rinses easily. Angled head negotiates turns. Use over and over. No dangerous chemicals. Plumb Pak Waste Arm, 1-1/2 in Dia X 7 in Length, Slip Joint, Plastic, Black Replaces 1-1/4" or 1-1/2" plastic or metal drain traps. For above ground use only.
World Wide Sourcing PPG130R-25X20X20 Galvanized Red Tee World Wide Sourcing PPG130R-25X15 Galvanized Red Tee World Wide Sourcing PPG130R-25X20 Galvanized Red Tee
Flat banded, right hand threads. Flat banded, right hand threads. Flat banded, right hand threads.
COUPLE FLEX SLIP JOINT 1-1/2IN DRAIN PIPE WASTE CO 1-1/2X16IN Worldwide Sourcing FC56-33 Flexible Couplings
For kitchen and bathroom sinks drains. Connects to either plastic or metal inlets:Includes tailpiece extension with high-line captured nut. Flexibility allows for offset connections up to 2 inches. Slip-joint Center outlet waste pipe is designed for use in tubular sink drain applications. It is constructed from durable plastic that will endure the rigors of everyday use. The slip joint connection makes it easy and quick to install. Flexible pipe couplings are designed to replace standard SWV fittings. Suitable for use with cast iron, plastic, copper or steel. Suitable for use underground.  Not for use on pressurized plumbing systems. Meets ASTM C-1173, C-1277, C1460, CISPI 310, IAPMO PS 109, PS90, & CSA B602.
PlumbPak PP950W S-Trap Fernco 1059 Flexible Pipe Coupling PlumbPak PP20663 S-Trap
Solvent weld connects to 1-1/2" schedule 40 outlet for kitchen or lavatory. Series 1059 desgined for socket-to-socket and socket-to-pipe connections. Repair or alter plastic pipe joints without replacing perfectly good fittings. Makes socket-to-pipe connections easy and reliable. Can also be used with plastic traps. Made of elastometric PVC. Premium Series 300 stainless steel bands included. For kitchen or lavatory connection to floor. Supplied with 1-1/2" and 1-1/4" poly washers.
Fernco 1056 Flexible Pipe Stock Coupling World Wide Sourcing 2A-1-1/4G Galv. Pipe Fitting World Wide Sourcing B220 40 Black Pipe  Malleable Coupling
Series 1056 designed for cast iron, plastic, copper, steel, or lead to cast iron, plastic, copper, steel, or lead WORLDWIDE SOURCING Pipe Elbow, 1-1/4 in Nominal Size, Threaded, 90 deg, Malleable Iron, Galvanized WORLDWIDE SOURCING Pipe Coupling, 1-1/2 in Nominal Size, Threaded, Malleable Iron, Black Oxide
World Wide Sourcing 21-1 1/2G Galv. Pipe Fitting Oatey 43582 Floor Drain With 5 in Stainless Steel Screw-Tite Strainer Plumb Pak PP20925 End Waste Outlet With Baffle Tee
WORLDWIDE SOURCING Pipe Coupling, 1-1/2 in Nominal Size, Threaded, Malleable Iron, Galvanized Oatey Floor Drain, General Purpose, 3 in or 4 in, 4.95 in Flange, 2.685 in Overall Height, 5.19 in Overall Width, ABS, ISO:9001 Certified C to E with baffle tee.
Worldwide Sourcing 33U-305 Flexible Donut PlumbPak PP960W S-Trap CLAMP HOSE STL ASSORTMENT 40PC
Pipe hub donuts for compression sealing of sewer pipe joints and DWV connections such as sockets, bells, hubs and spigots. Not for use on pressurized plumbing systems. Meets ASTM C-1173, C-1277, C1460, CISPI 310, IAPMO PS 109, PS90, & CSA B602. For kitchen or lavatory. Supplied with 1-1/2" and 1-1/4" polywashers. 1-1/2" outlet connects to 1-1/4"O.D. or 1-1/2"O.D. tube size. All the popular sizes in one convenient kit for use in securing hoses around pipes and for automotive uses, Worm gear type, Zinc-plated to resist rust and corrosion, Comes in a re-sealable divided PVC storage case.
Worldwide Sourcing FC56-44 Flexible Couplings Worldwide Sourcing FC56-32 Flexible Couplings Worldwide Sourcing KJ-021 Flexible Coupling
Flexible pipe couplings are designed to replace standard SWV fittings. Suitable for use with cast iron, plastic, copper or steel. Suitable for use underground.  Not for use on pressurized plumbing systems. Meets ASTM C-1173, C-1277, C1460, CISPI 310, IAPMO PS 109, PS90, & CSA B602. Flexible pipe couplings are designed to replace standard SWV fittings. Suitable for use with cast iron, plastic, copper or steel. Suitable for use underground.  Not for use on pressurized plumbing systems. Meets ASTM C-1173, C-1277, C1460, CISPI 310, IAPMO PS 109, PS90, & CSA B602. For connecting pipes made of unlike materials such as clay to cast iron.  Suitable for underground use. Not for use on pressurized plumbing systems. Meets ASTM C-1173, C-1277, C1460, CISPI 310, IAPMO PS 109, PS90, & CSA B602.
J-TRAP FLEX SLIP JOINT 1-1/2IN Worldwide Sourcing FC56-315 Flexible Couplings Fernco P33U-305 Compression Red Donuts
Designed for use in tubular sink drain applications. Crafted from durable plastic that resists clogging and will not pit or rust. The flexibility allows for offset connections up to 2". Connects to either plastic or metal inlets: 1-1/2"  or 1-1/4". Slip joint connection assembly to tailpiece or directly connect to strainers. Includes sink trap with cast elbow adapter. Flexible pipe couplings are designed to replace standard SWV fittings. Suitable for use with cast iron, plastic, copper or steel. Suitable for use underground.  Not for use on pressurized plumbing systems. Meets ASTM C-1173, C-1277, C1460, CISPI 310, IAPMO PS 109, PS90, & CSA B602. Seal against infiltration and exfiltration. Approved by SBCCI, BOCA and UPC. Conforms to applicable parts of ASTM C443, C425, C564, and D1869. Connects SV CI Hub to Sch. 40 DWV plastic.
Worldwide Sourcing KJ-018 Flexible Couplings Worldwide Sourcing DTC-215 Drain Pipe Connectors Fernco 1056 Flexible Pipe Reducing Stock Coupling
For connecting pipes made of unlike materials such as clay to cast iron.  Suitable for underground use. Not for use on pressurized plumbing systems. Meets ASTM C-1173, C-1277, C1460, CISPI 310, IAPMO PS 109, PS90, & CSA B602. Connects 1-1/4" or 1-1/2" common drain traps to plastic, steel, cast iron or copper drain pipe. For above ground use only. Series 1056 designed for cast iron, plastic, copper, steel, or lead to cast iron, plastic, copper, steel, or lead
Worldwide Sourcing 44U-405 Flexible Donuts Fernco P22U-205 Compression RedDonuts