Home > PLUMBING > ROUGH PLUMBING SUPPLIES > PIPE > STEEL PIPE-BLACK
Sort By:
1
Worldwide Sourcing 70490-3L Toilet Bolt Sets World Wide Sourcing PMB-475-3L Toilet Bolt Caps Worldwide Sourcing 24448-3L Toilet Screw Sets
Brass plated. 2 per bag. Includes 2 each: 2-1/4"OD x 2-1/2" brass screws and washers.
Worldwide Sourcing 7040-3L Toilet Bolt Set FLOAT BALL TOILET UNIV BLACK  BOLT CAP TOILET UNIV ALMOND
Includes 2-1/4"OD x 2-1/4" bolts, washers, and nuts. For use with most toilets, molded in one piece. Black finish. Plastic constructin, two caps with washers. White finish.
FLAPPER UNIV CHAIN/HOOK/RING  Harvey 061095 Toilet Flange Screw Set CAP TOILET BOWL ROUND WHITE
Includes chain, hook and ring. Steel construction. Contains: 2 brass toilet flange screws, 2 closed-end acorn nuts and 2 heavy plated washers.  Polybagged. Plastic construction. Three caps with washers. White finish.
Worldwide Sourcing PMB-229 Toilet Bolt Sets WASHER TOILET TANK BOLT 5/16IN World Wide Sourcing PMB-197 Toilet Tank Ball Lift Wire
Brass plated. 1? x 1/4? x 1/8?. For 5/16 bolts. Installs between the china of the toilet tank and the bolts that connect the tank to the bowl. Includes 4 washers. Assembly set including 5" lift wire and chain.
World Wide Sourcing PMB-476 Toilet Bolt Caps Genova 400 Sewer and Drain Pipe Cap Plumb Pak PP23516 Toilet Bolt Set
Worldwide Sourcing Toilet Bolt Cap, Oval, 2-Piece, Plastic, White Used to permanently or temporarily cap pipe. Meets ASTM D2852. Includes two brass-plated bolts, two washers and two nickel-plated nuts.
BOLT TANK TO BOWL 5/16X2-1/2IN Worldwide Sourcing PMB-480 Toilet Bolt Set Plumb Pak PP836-51 Toilet Tank Bolt Washer
Brass construction, 1/4" x 3-1/2" bolts. Includes two bolts washers and nuts. Brass plated. 2-  5/16" washers per card.
Worldwide Sourcing PMB-482-3L Toilet Bolt-Screw Set Fluidmaster 7110 Toilet Bolt SCREWS TOILET 1/4 X 2-1/2IN
Includes two 1/4" x 2-1/4" bolts, and two 1/4" x 2-1/2" screws. Secures toilet bowl to floor flange, Includes 2 bolts, 2 plastic retainer washers, 2 washers and 2 nuts. Steel construction, secures toilet to floor, includes (2) 1/4" x 2-1/2" screws, washers.
World Wide Sourcing PMB-477 Toilet Lift Wire & Rod Set Plumb Pak PP23515 Toilet Screw Set Worldwide Sourcing 24458-3L Toilet Flush Levers
Brass wires with aluminum rod. Nuts and washers included. 2 per pack. Worldwide Sourcing Toilet Flush Lever, Chrome
Genova 50025 CPVC Tubing Plumb Pak PP835-33 Flapper Lift Chain With Hook and Ring Plumb Pak PP835-30 Round Fit Toilet Bolt Cap
High-temperature domestic water supply used in hot and cold water pressure applications, from water main to fixtures. For hot water distribution systems up to 180 degrees Fahrenheit at 100 PSI. Sizing equals copper pipe size. Plumb Pak Flapper Lift Chain, Universal, 9 in Length White push on type. Covers exposed toilet bolts.
Plumb Pak PP23517 Toilet Bolt Set FLOAT ROD TOILET 10IN ADJUST  Plumb Pak PP835-31 Oval Toilet Bolt Cap
Includes two brass-plated bolts, two washers and two nickel-plated nuts. Steel construction. Universal design. White push on type snaps in place.
Worldwide Sourcing 8045 Toilet Bolt Sets Harvey 051100 Toilet Bolt Set TOILET LIFT WIRE 4-1/2IN UNIV
Includes 2-1/4"OD x 2-1/4" bolts, washers, and nuts. Includes 2 each: toilet flange bolts, open acorn hex nuts, heavy plated washers and plastic retainers washers. Excess bolt snaps off, no need to saw off longer bolts. Polybagged. Brass construction. Includes 4-1/2" lift wire and beaded chain.
BOLT TANK/BOWL 5/16IN X3-1/4IN Danco 88877 Twister Toilet Bolt Cap BOLT CLOSET 1/4X2-1/4IN BRASS
Brass construction, 1/4" x 3-1/2" bolts. Includes two bolts washers and nuts. Plastic construction. White screw-on toilet caps. Eliminates loose cap. Fastens toilet bowl to floor. Includes two bolts, washer and nuts.
Plumb Pak PP835-16 Toilet Bolt Set BOLT CAP CLOSET OVAL WHITE    Plumb Pak PP834-5 Toilet Tank Wing Nut
Includes two brass-plated bolts, two washers and two nickel-plated nuts. Two caps with washers. Plastic construction. White finish. Wing nuts for tank-to-bowl bolts.
FLOAT ROD TOILET 8IN ADJUSTBLE BOLT CAP CLOSET ROUND WHITE   Plumb Pak PP9906-1 Toilet Tank Float Ball
Steel construction. Universal design. 8? float rod with extra long threads. Two brass plated bolts with washers and nuts, two caps with washers. 1/4" x 2-1/4" bolts. White finish. Plumb Pak Toilet Tank Float Ball, Plastic, Black
BOLT/NUT CLOSET 5/16X2-1/4 BRS Plumb Pak PP835-19 Toilet Bolt Set With Open Cap Nut World Wide Sourcing PMB-206 Toilet Flush Levers
Fastens toilet bowl to floor. Includes two bolts, washer and nuts. 2 plastic closet bolts with open cap nuts. Chrome plated handle, white plastic arm.
World Wide Sourcing PMB-211 Toilet Flush Lever Worldwide Sourcing 192265 Toilet Tank-To-Bowl Bolts Plumb Pak PP23506 Front Mount Toilet Flush Lever
Chrome plated handle, white plastic arm. Includes 2 each: 5/16"OD x 3-1/8" solid brass bolts, 4 rubber washers, and 4 steel washers. 8" aluminum rod. Plastic nut and spud.
Harvey 051150 Toilet Bolt Set Plumb Pak PP23514 Toilet Bolt Set Plumb Pak PP835-12 Flexible Fill Valve Refill Tube With Clip
Includes 2 each: toilet flange bolts, open acorn hex nuts, heavy plated washers and plastic retainers washers. Excess bolt snaps off, no need to saw off longer bolts. Polybagged. 2 toilet bolts with nuts and washers. Plumb Pak Fill Valve Refill Tube, Flexible, 1/4 in OD X 9 in Length, Plastic
World Wide Sourcing PMB-207 Toilet Flush Lever BOLT/NUT CLOSET 3-1/2IN STEEL Genova FlowGuard Water Pipe
For Mansfield #35 and #51 tanks. Chrome plated handle and blue plastic arm. Brass construction, 1/4" x 3-1/2" bolts. Includes two bolts washers and nuts. Highly resistant to corrosion and energy efficient. Offers reduced condensation, quiet operation, and no scale build-up. Meets ANSI/NSF 61 requirements regardless of the pH of the water.
Plumb Pak PP23519 Toilet Bolt Set With Open Cap Nut BOLT TANK/BOWL 5/16IN X 3IN   HANDLE 4IN CHROME A-STD/ELJER
2 plastic closet bolts with open cap nuts. Brass construction, 1/4" x 3-1/2" bolts. Includes two bolts washers and nuts. Plastic handle and arm construction. 4" maximum flush arm length. Chrome finish.
HANDLE TOILET UNIV 8IN CHROME TOILET HANDLE TRIM/FIT CHROME Plumb Pak PP835-14 Toilet Bolt Set
5/16" x 3-1/2" Trim-to-Fit toilet handle features a universal design that can be easily cut to the desired length to fit your toilet. The 10 in. length can be trimmed to 8", 6" or 4" for convenient installation. 2 toilet bolts with nuts and washers.
FLUSH LEVER UNIVERSAL 9IN CHR Plumb Pak PP835-13 Adjustable Tank Ball Guide Arm Plumb Pak PP835-30WHL Decorative Round Fit Toilet Bolt Cap
Fits front, side, and angle mount toilets. Plastic bendable arm, Carded. Plumb Pak Toilet Bolt Cap, Decorative, Round, Universal Fit, White
BOLT/SCREW CLOSET SET         World Wide Sourcing 24375 Toilet Flush Levers Plumb Pak PP835-17 Toilet Bolt Set
Designed to secure toilet to floor. Galvanized steel construction, includes  two 1/4" x 2-1/2" bolts, two 1/4" x 2-1/2" screws, nuts and washers. Worldwide Sourcing Toilet Flush Lever, Polished Brass Includes two brass-plated bolts, two washers and two nickel-plated nuts.
TOILET HANDLE TRIM/FIT WHITE  Plumb Pak PP835-151 Toilet Screw Set Plumb Pak PP835-165 Closet Screw and Bolt Set
Trim-to-Fit toilet handle features a universal design that can be easily cut to the desired length to fit your toilet. The 10 in. length can be trimmed to 8", 6" or 4" for convenient installation. Nuts and washers included. 2 per pack. Tank to floor bolt/screw set - brass plated - includes 1/4" x  2-1/2" screws and 1/4" x 2-1/4" bolts - 2 per pack.
HANDLE TOILET UNIV 8IN CHROME LIFT WIRE TOILET UNIV 9 INCH  Plumb Pak PP835-61 Overflow Tube
Plastic handle with 8" metal arm. Brass construction, universal design. Includes 9? lift wire and 4-1/2? tank bulb stem. 1" or 1-1/8" x 10".
HANDLE TOILET UNIV 8IN CHROME Plumb Pak PP835-150 Toilet Bolt Set TOILET HNDL 9IN CHROME MANSFLD
Metal arm with plastic shank and nut. 8? maximum flush arm length. Universal design. 2 toilet bolts with nuts and washers. Plastic construction, front mount, 9" maximum flush arm length. Blue arm handle, chrome handle finish. Use with WaterSaver flush valves no. 208 and 209.
TOILET HANDLE 6IN WHT AMERICAN Plumb Pak PP835-170 Toilet Bolt Set Plumb Pak PP835-18 Toilet Tank Bolt
Plastic handle and arm construction. Designed to fit Plebe and Tilche models. 6" arm. White finish. Includes two brass-plated bolts, two washers and two nickel-plated nuts. Brass plated 5/16in-18 x 3in tank to bowl bolts. Wing nuts, hex nuts and washers included. 2 per package.
FLUSH LEVER UNIVERSAL 9IN WHT World Wide Sourcing PMB-205-3L Toilet Flush Levers World Wide Sourcing PMB-208-3L Toilet Flush Levers
Fits front, side, and angle mount toilets. Plastic bendable arm, Chrome plated handle and white plastic arm. Trim to 4", 6", or 8" arm. Plastic white handle and black arm.
TOILET HNDL 9IN CHROME MANSFLD Worldwide Sourcing PMB-483-3L Toilet Tank-To-Bowl Bolts Plumb Pak PP830-49 Snap-Off Toilet Bolt Set
Plastic construction. 9" maximum flush arm length, front/left mount. Designed to use with watersaver flush valves 208 and 209. Chrome finish with white lever handle. Two 5/16" x 3" brass plated bolts. 1 set per card.
Plumb Pak PP836-16 Front Mount Toilet Flush Lever Genova 50035 CPVC Tubing Fluidmaster 681 Triangular
Front mount, 8" arm. Chrome plated handle. High-temperature domestic water supply used in hot and cold water pressure applications, from water main to fixtures. For hot water distribution systems up to 180 degrees Fahrenheit at 100 PSI. Sizing equals copper pipe size. Trims/bends to fit most front, side and angle-mount tanks. Fits American Standard, Eljer, Kohler Wellworth and more. No pre-measuring required. Self-tightening lock-nut will not loosen over time.
Plumb Pak PP835-76 Cut to Fit Front Mount Toilet Flush Lever CLOSET BOLT 1/4X2-1/4IN       Fluidmaster 6101 Tank To Bowl Bolt
8" arm, white handle. Combo for 4", 6", or 8" American Standard. Carded. Includes extra heavy nuts and nickel-plated brass washers. 1 pair. Durable solid-brass bolts with washers and nuts.
Plumb Pak PP23559 Front Mount Toilet Flush Lever Plumb Pak PP835-60 Front Mount Toilet Flush Lever Plumb Pak PP836-25 Front Mount Toilet Flush Lever
White handle, plastic nut, spud, and arm. 8" arm. White plastic handle. Front mount, 4" arm.
Plumb Pak PP23518 Toilet Tank Bolt LINE SUPPLY ICE MAKER 12IN    Plumb Pak PP835-70 Toilet Tank Float Rod
Brass plated 5/16in-18 x 3in tank to bowl bolts. Wing nuts, hex nuts and washers included. 2 per package. Plumb Pak Toilet Tank Float Rod, Suitable For Use With: 2 in Flush Valve Assembly, 1/4 in Diameter X 10 in Length, Brass
Johni-Bolts 90124 Toilet Bolt Plumb Pak PP835-6 Front Mount Toilet Flush Lever Plumb Pak PP835-11 Flapper Lift Chain
Solid brass closet bolt with time saving snap-off slot and captive washer. A pair of pliers easily snaps off the top of the bolt. Captive washer keeps bolt upright and prevents it from falling through the flange. Oversized solid brass acorn nuts and stainless steel washers. Packaged in pairs (two bolts with captive washer, two washers, two brass acorn nuts per package). Specially designed head fits into every flange and slides easily into position. 8" aluminum rod. Plastic nut and spud. Flapper lift wire and chain.
Sure-Fit 680 Standard Toilet Tank Lever SCREW CLOSET TOILET 1/4 X3-1/2 Plumb Pak PP23632 Front Mount Toilet Flush Lever
Trims/bends to fit most front, side and angle-mount tanks. Fits American Standard, Eljer, Kohler Wellworth and more. No pre-measuring required. Self-tightening lock-nut will not loosen over time. Galvanized steel, Includes two 1/4" x 3-1/2" screws. Stainless steel finish. Complete with head and washer. For Mansfield with Mansfield flapper flush valve #35 and 51 tanks. Chrome plated handle.
Plumb Pak PP835-5 Toilet Float Rod and Lift Wire Plumb Pak PP836-35 Toilet Flush Lever Plumb Pak PP830-56 Snap-Off Toilet Bolt Set
1 upper wire and 1 lower wire. Flush arm for Kohler. 14-1/2" H x 3-1/2" W. 1 set per card.
Plumb Pak PP835-62 Front Mount Toilet Flush Lever TOILET HANDLE 6IN 45DEG CHROME Genova FlowGuard Water Pipe
6" ARM Plastic handle and arm construction.Designed to fit Cadet models. 6" maximum flush arm that angles at 45 degrees. Highly resistant to corrosion and energy efficient. Offers reduced condensation, quiet operation, and no scale build-up. Meets ANSI/NSF 61 requirements regardless of the pH of the water.
Plumb Pak PP836-26 Cut to Fit Front Mount Toilet Flush Lever Plumb Pak PP835-181 Tank-To-Bowl Toilet Bolt Set DRAIN PIPE PERF FLEX 4INX8FT
Front mount. 8" arm. Chrome handle. Combo for 4", 6", or 8". Plumb Pak Toilet Bolt Set, Tank-To-Bowl Exceeds ASTM standards and is made with no-break copolymers for professional grade strength and integrity, Proprietary peak and valley design offers greater surface area and a 30 percent higher load-bearing rating than standard corrugated pipe, Perforated pipe with sock is ideal for French drain application in fine soil, Fittings available to adapt to 3 or 4 in. corrugated pipe and 4 in. PVC, Perfect for tight spaces and curvy places, Taping joints is not necessary. This pipe has spaced slits, so water drains in stages.  It's also perfect for applications such as French drains or dispersing water from flower beds, but works even better in locations where surrounding soil or sand is fine and requires filtration or where debris is considerable.
DRAIN PIPE SOLID FLEX 4INX8FT Danco 88884 Twister Toilet Bolt BOLT CLOSET 5/16IN X 2-1/4IN
Great for diverting water from one place to another, Water will not seep out until it reaches the end of the pipe. White screw-on toilet caps. Brass bolts with break-off feature. Includes extra heavy nuts and nickel-plated brass washers. 1 pair.
HANDLE TOILET UNIV 8IN CHROME Danco 40602B Tank Bolt Washer Plumb Pak PP23630 Front Mount Toilet Flush Lever
Metal handle and arm, 8? maximum flush arm length, fits most toilets, single action. Chrome finish. Danco Tank Bolt Washer, Suitable For Use With: 5/16 in Bolt, NO 7, 1/4 in ID X 1 in OD X 1/8 in Thickness, Rubber Mansfield tank lever for Universal flapper valve. Chrome Plated handle
Genova Products 80011F ABS-DWV Foam Core Pipe Danco 88883 Toilet Bolt With Plastic Screw-On Cap TOILET HNDL 6-1/4 CHROME A/STD
High-impact resistant, lightweight composite foam core for easy 1-step solvent cementing installation. Use with all Genova ABS-DWV fittings. Does not rot, rust, or corrode to keep surface smooth for easy flow. Resists chemicals commonly used in bathrooms and kitchens, unaffected by commonly used household chemicals including drain and bowl cleaners. Conforms to ASTM F 6208-01, NSF Approved. White screw-on toilet caps. Brass bolts with break-off feature. Plastic construction. 6-1/4" maximum flush arm length.
TOILET HANDLE 6IN 28DEG CHROME TOILET HANDLE 6IN 28DEG WHITE BOLT CLOSET 5/16X3-1/2IN BRASS
Plastic. Designed to fit Cadet models. 6" maximum arm length, angled at 28 degrees. Plastic. Designed to fit Cadet models. 6" maximum arm length, angled at 28 degrees. Fastens toilet bowl to floor, 5/16" x 3-1/2". Includes two bolts, washers and nuts.
Plumb Pak PP835-77 Cut to Fit Toilet Flush Lever Plumb Pak PP836-74 Toilet Flush Lever Fluidmaster 6105 Tank To Bowl Bolt
Neo angle 28 degree 8" arm. Chrome plated handle. Combo for 4", 6" or 8" applications. Carded.. Manfield tank lever. Polished brass handle. Durable solid-brass bolts with washers and nuts.
Hancor 04020010H Drain Pipe TOILET TANK REPAIR KIT        Plumb Pak PP836-30 Front Mount Toilet Flush Lever
Perforated 3-hole. 120 degree. CSA approved. The Korky 2" EasyFix Flush Valve Repair Kit is designed to repair corrosion or deposits on plastic and brass flush valve seats. The kit includes a Korky Plus flapper, a plastic flush valve seat and silicone sealant to repair corroded flush valve seats without removing your toilet tank. The engineered materials resists chlorine, bacteria, city water treatment, hard water, and well water. Silicone seals within 15 minutes. Made of flexible rubber for a tight seal and easy to install, the 2003 includes: (1) Premium Flapper, (1) Stainless Steel Chain, (1) Plastic Flush Valve Seat and (1) Tube of Silicone Sealant. Mansfield tank lever for Universal flapper valve. Chrome Plated handle
Plumb Pak PP836-32 Front Mount Toilet Flush Lever HANDLE TOILET UNIV 8IN WHITE  Hancor HY-PF1-04-0010 Perforated Single Wall Pipe
For Mansfield with Mansfield flapper flush valve #35 and 51 tanks. Chrome plated handle. Durable plastic handle and arm construction. Fits side, front or angle mount toilet tanks. Easy to install. Hancor heavy duty pipe for use in non-pressure drainage applications. Made of high density polyethylene. CSA approved.
Hancor 04540010H Solid Single Wall Pipe LINE SUPPLY ICE MKR 5FT PVC   HANDLE 9IN POLISHED BRASS UNIV
Hancor heavy duty pipe for use in non-pressure drainage applications. Made of high density polyethylene. CSA approved. Metal handle and arm construction. 8" maximum flush arm length. Single action. Fits most toilets.
TOILET HANDL SIDE 8-1/2IN CHRM TOILET HANDLE UNIV DLX CHROME LEVER TOILET TANK WHITE
LEVER TOILET TANK WHITE
Our Price: $8.19
Plastic arm. 8-1/2" maximum flush arm length. Chrome finish. Metal arm construction, front mount, 8" maximum flush arm length. Includes lever and handle. The Perfect Fit lever is our newest addition to our tank lever product line. The simple yet innovative design to adjusts to any toilet tank, including right handed tanks. Simply rotate the arm for the perfect fit.
Sure-Fit Euro 683 Curved Toilet Tank Lever FLUSH LEVER UNIVERSAL 9IN WHT TANK LEVER PREMIUM NICKLE
Bends/trims to fit most front, side, and angle mount tanks. Easy to install. Self-tightening lock nut won't loosen over time. Fits most American Standard, Eljer, Kohler Wellworth, Mansfield brand toilets and more. Carded. Fit-all toilet tank lever. front mount, plastic handle, nut and spud. cuttable/bendable brass 8" arm with holes for 4", 6", and 8". Replacement tank lever with bendable brass arm and brushed nickel handle. Fits front, side or angle mount toilet tanks. Arm length adjustable from 5" to 8".
Sure-Fit Euro Curved HANDLE TOILET 10IN CHR MANSFLD Genova Products 80021F ABS-DWV Foam Core Pipe
Trims/bends to fit most front, side and angle mount tanks, self-tightening locknut won't loosen over time, fits American Standard, Eljer, Kohler Wellworth, Mansfield brand toilets and more. Plastic handle with 10"  maximum length metal arm. High-impact resistant, lightweight composite foam core for easy 1-step solvent cementing installation. Use with all Genova ABS-DWV fittings. Does not rot, rust, or corrode to keep surface smooth for easy flow. Resists chemicals commonly used in bathrooms and kitchens, unaffected by commonly used household chemicals including drain and bowl cleaners. Conforms to ASTM F 6208-01, NSF Approved.
Plumb Pak PP835-58 Front Mount Toilet Flush Lever Plumb Pak PP835-63PB Front Mount Toilet Flush Lever Plumb Pak PP836-28 Toilet Flush Lever
Metal nut and spud. 8" brass rod. Plastic nut and spud with metal rod.  Carded. Neo angle 45 degree 6" arm. Chrome handle. For Hamilton, Cadet II and Cadet III American Standard.
Danco 10031 Toilet Flush Lever With Microban Protection LEVER TOILET TANK CHROME      FLUSH LEVER UNIVERSAL 9IN BRS
Chrome, curved flush lever. The Perfect Fit lever is our newest addition to our tank lever product line. The simple yet innovative design to adjusts to any toilet tank, including right handed tanks. Simply rotate the arm for the perfect fit. Fit-all toilet tank lever. front mount, plastic handle, nut and spud. cuttable/bendable brass 8" arm with holes for 4", 6", and 8".
TOILET HNDL SIDE 9-1/4IN CHRM LEVER TOILET TANK BRUSH NICKEL World Wide Sourcing 24451-3L Toilet Tank Repair Kit
Metal construction, 9" maximum flush arm length. Chrome finish. 9-1/2". The Perfect Fit lever is our newest addition to our tank lever product line. The simple yet innovative design to adjusts to any toilet tank, including right handed tanks. Simply rotate the arm for the perfect fit. 8-1/2" height. Contains ballcock, tube, float rod, float, and flapper ball.
Plumb Pak PP835-64 Front Mount Toilet Flush Lever Plumb Pak PP23004 Economy Toilet Tank Repair Kit LINE SUPPLY ICE MKR 10FT PVC
Plastic nut and spud with metal rod.  Carded. Economy kit for 8-1/2" tanks. Includes float, 8" ballcock, flapper and float rod.
Plumb Pak K831-1 Toilet Tank Repair Kit TOILET BOLTS AND CAPS         TOILET BOLT ZERO CUT
Includes metal refill tube clip, rubber cone washer, rubber refill tube, plastic lock nut, plastic washer, flapper with chain hook. Features low profile design, twist knob adjustment for water level control, quiet operation. Fits standard 2-piece toilets. Low profile bolt caps are easy to clean and won't pop off. Locking flange nut won't spin or tip over during installation. Top down installation means no cutting is necessary, Adjustable height bolts - extension of up to three inches for just the right height ? no cutting required. Works for any toilet installation - if flange is above, below or flush with the floor. Sliding adapters tighten the bolts and attach the low-profile bolt caps. No tools or cutting required.
Plumb Pak PP835-66 Front Mount Toilet Flush Lever Fluidmaster 687 Toilet Tank Lever Sure-Fit Euro 686 Toilet Tank Lever
Front mount, 4-1/2" brass arm. Oil-rubbed bronze tank lever. Fits most toilet tanks. Carded. Trims/bends to fit most front, side and angle mount tanks, self-tightening locknut won't loosen over time, fits American Standard, Eljer, Kohler Wellworth, Mansfield brand toilets and more.
TOILET TANK REPAIR UNIVERSAL  Danco 10071 Dual Flush Toilet Flush Lever Plumb Pak PP835-85 Front Mount Toilet Flush Lever
Contains universal flapper with adapter, spring, float with rod, and ballcock with fill tube. For single-flush applications, durable plastic construction. Universal dual flush toilet handle. Chrome. Flush lever for universal rundle. Chrome plated handle.
Plumb Pak PP835-74 Side Mount Toilet Flush Lever Korky QuietFill 818BP Fill Valve and Flapper Plumb Pak PP836-31 Front Mount Toilet Flush Lever
Flush lever for Eljer side mount. Chrome plated handle. Designed to fix no/slow refilling, running, and noisy toilets, the Korky QuietFILL Toilet Fill Valve is quieter than other fill valves. It has a universal design to fit all brands and features a wide range of adjustability to fit most 2-piece and 1-piece toilets. The QuietFill Fill Valve is very easy to install and adjust; no tools are required. Simply remove your old fill valve or ballcock, insert your new Korky fill valve, and adjust. The innovative twist-lock adjustment makes installation easy. Designed to fit more toilets, the QuietFill toilet fill valve adjusts from 7-3/4 inch to 13-1/2 inch.  Also included is the longest lasting Korky Plus 2 In. Toilet Tank Flapper. Easy to install, the 818 includes: (1) 528 Fill Valve, (1) 2001 Flapper, (1) Refill Tube, (1) Metal Refill Tube Clip, (1) Mounting Nut, (1) Cone Washer, (1) Coupling Nut, (1) Tamper Proof Key and (1) Instructions. Mansfield tank lever. Old style #42. Chrome plated handle.
Plumb Pak PP830-4 Economy Toilet Tank Repair Kit Fluidmaster 400C Toilet Tank Repair Kit Eastman 41042 Braided Dishwasher Hose
Economy kit for 8-1/2" tanks. Includes float, 8" ballcock, flapper and float rod. Corrosion resistant material. Alerts you to water waste, automatically signals if tank leak should develop. Fits most toilet tanks. Anti-siphon design prevents contamination of fresh water supply. Valve height and water level adjusts for correct fit and most efficient flush level. The Bulls Eye Flappers corrosion free plastic seat assures complete shut-off, no more handle jiggling. Simplified design eliminates old brackets, lift wires and assures positive alignment. Chlorine-resistant for harsh water regions. Meets anti-siphon codes. Carded. Hose with nickel plated brass nuts. Complies with no-lead laws. 3/8" Comp x 3/4" Female Hose Thread.
Plumb Pak PP835-65 Push Button Side Mount Fit Toilet Flush Lever Genova Products 560010 CPVC Pipe Plumb Pak PP25523 Ice Maker Supply Lines
Side mount push button. Chrome handle. 8" arm. High-temperature domestic water supply used in hot and cold water pressure applications, from water main to fixtures. For hot water distribution systems up to 180 degrees Fahrenheit at 100 PSI. Sizing equals copper pipe size. Bulk with flag label.
LEVER TANK CLASSIC WHITE      TANK REPAIR KIT ANTI-SIPHON   Eastman 41045 Braided Dishwasher Hose
Designed to fit the majority of toilets, the Korky StrongARM Handle & Lever easily adjusts to fit all tank positions including: front, side, angle and down. Optimized for use with both 2" & 3" flappers and canister.style flush valves, the engineer grade material performs as well as brass and aluminum levers. Reinforced in common stress areas, the StrongARM lever is adjustable to eliminate the need to bend for fit. Fits most popular brands, including American Standard, Kohler, TOTO & all others. Easy to install, the 6060 includes: (1) White Handle, (1) Tank Lever Arm, (2) Locking Clips and (1) Stainless Steel Lanyard Hook. Includes: universal flapper with adapter, float with rod and ballcock with refill tube. Fill valve is designed for municipalities requiring anti-siphon valving. For single-flush applications. Plastic construction. Fits all dishwasher connections. Includes both hose thread elbow and compression elbow for all models of dishwasher.
Genova 500052 Solid Cut Pipe Eastman 41043 Braided Dishwasher Hose Plumb Pak PP836-36 Side Mount Toilet Flush Lever
Used within buildings for potable hot and cold water distribution from the water meter to fixtures. Meets ASTM D2846. NSF listed. Hose with nickel plated brass nuts. Complies with no-lead laws. 3/8" Comp x 3/4" Female Hose Thread. Chrome handle.
World Wide Sourcing 24449 Toilet Tank Repair Kits LEVER TANK CLASSIC CHROME     Fluidmaster 6W48 Braided Dishwasher Connector
Contains ballcock, tube, float rod, ball, tank lever, lift wire, and guide holder. Designed to fit the majority of toilets, the Korky StrongARM Handle & Lever easily adjusts to fit all tank positions including: front, side, angle and down. Optimized for use with both 2" & 3" flappers and canister.style flush valves, the engineer grade material performs as well as brass and aluminum levers. Reinforced in common stress areas, the StrongARM lever is adjustable to eliminate the need to bend for fit. Fits most popular brands, including American Standard, Kohler, TOTO & all others. Easy to install, the 6060 includes: (1) White Handle, (1) Tank Lever Arm, (2) Locking Clips and (1) Stainless Steel Lanyard Hook. High Bursting strength, each foot of No-Burst contains 220 feet of stainless steel wire. Stainless ferrules are extra-long with added crimps for added security. Non toxic polymer core resists chlorine and chloramines. Captive cone washers seal tightly. Exceptionally flexible for fast easy installation. Won't kink or crease in the tightest of spaces. Easy to grip, nickel plated brass hex nuts. Exceeds all pluming code requirements. Meets agency standards. IAPMO Standard, PS74-95, CSA, SBCCI, FDA, NSF-61, A112.18.6 and UPC.
Plumb Pak PP830-8 Adjustable Floatless Toilet Repair Kit Plumb Pak PP830-2 Toilet Tank Repair Kit LEVER TANK FAUCET CHROME
Kit with flapper. Adjustable and floatless. Adjusts from 9-1/2" to 13-1/2". Eliminates float ball and rod. Kit for 8-1/2" tanks. Includes: tank ball, float lift wires, float rod, tank lever, guide holder, and 8" ballcock. Carded. Designed to fit the majority of toilets, the Korky StrongARM Handle & Lever easily adjusts to fit all tank positions including: front, side, angle and down. Optimized for use with both 2" & 3" flappers and canister.style flush valves, the engineer grade material performs as well as brass and aluminum levers. Reinforced in common stress areas, the StrongARM lever is adjustable to eliminate the need to bend for fit. Fits most popular brands, including American Standard, Kohler, TOTO & all others. Easy to install, the 6060 includes: (1) White Handle, (1) Tank Lever Arm, (2) Locking Clips and (1) Stainless Steel Lanyard Hook.
Plumb Pak Stylewise PP836-74BNL Fit Toilet Flush Lever Namasco BLACK-1/2 Pipe Plumb Pak Stylewise PP836-74CPL Fit Toilet Flush Lever
Front, angle, or side mount - plastic nut & spud - metal handle with cuttable/bendable brass 8" arm with holes for 4", 6", and 8" applications. Standard weight, coupled and threaded for ordinary uses in steam, water, gas and air lines. Not for drinking water use.  Ordered by the length only. Front, angle, or side mount - plastic nut & spud - metal handle with cuttable/bendable brass 8" arm with holes for 4", 6", and 8" applications.
TANK LEVER BRUSHED NICKLE     Korky WaterWise 818Z Anti-Siphon Fill Valve and Flapper FILL VALVE/FLAPPER KIT PLATNUM
TANK LEVER BRUSHED NICKLE
Our Price: $15.16
Designed to minimize costly water loss, the WaterWI$E Fill Valve is the only dual shut-off fill valve that detects flapper leaks and hang-ups. Saves water due to leaks by not refilling the tank during a slow flapper leak and automatically shuts off if flapper is stuck open. Designed to fit more toilets, this toilet fill valve adjusts from 7-3/4" to 13-1/2", fitting large and small tanks. The WaterWI$E Fill Valve is quieter than other fill valves. Included in the kit is the Korky Plus 2 in. toilet tank flapper. The universal flapper is constructed from durable rubber and offers chlorine resistance. Easy to install, the 818Z includes: (1) 528Z Fill Valve, (1) 2001 Flapper, (1) Refill Tube, (1) Metal Refill Tube Clip, (1) Mounting Nut, (1) Cone Washer, (1) Coupling Nut, (1) Tamper Proof Key and (1) Instructions. Complete with a high performance fill valve designed to fit 99% of toilets and an adjustable, longest lasting 2? flapper, the Korky QuietFILL Platinum Fill Valve and 2" Flapper Kit is designed to fix the two most commonly replaced parts in a toilet. Easy to install, the fill valve is designed to fix no/slow refilling, running, and noisy toilets. Quieter than other fill valves, the QuietFILL Platinum Valve is ideal for toilets since 1994 (1.6 GPF or less). It is fully adjustable to prevent water waste in all toilets. The refill adjuster delivers the right amount of water to the bowl to maintain original performance. This toilet fill valve is easy to install and adjust; no tools are required. Designed to fit more toilets, the Korky toilet fill valve adjusts from 7.3/4 inch to 13.1/2 inch. The 818MP includes: (1) 528MP Fill Valve, (1) 100BP 2" Flapper, (1) Refill Tube, (1) Metal Refill Tube Clip, (1) Mounting Nut, (1) Cone Washer, (1) Coupling Nut, (1) Tamper Proof Key and (1) Instructions.
LINE SUPPLY ICE MKR 20FT PVC  Plumb Pak Stylewise PP836-71BNL Fit Toilet Flush Lever TOILET TANK REPAIR KIT
Fit all toilet tank lever - decorative toilet tank lever - faucet handle style - front, angle, or side mount - plastic nut & spud - metal handle with cuttable/bendable brass 8" arm with holes for 4", 6", and 8" application Includes float, flapper and tank lever. 12" height when installed. Plastic construction.
Plumb Pak Stylewise PP836-71CPL Fit Toilet Flush Lever Fluidmaster 1W48CU Braided Dishwasher Connector Fluidmaster 6W60 Braided Dishwasher Connector
Fit all toilet tank lever - decorative toilet tank lever - faucet handle style - front, angle, or side mount - plastic nut & spud - metal handle with cuttable/bendable brass 8" arm with holes for 4", 6", and 8" application High Bursting strength, each foot of No-Burst contains 250 feet of stainless steel wire. Stainless ferrules are extra-long with added crimps for added security. Non toxic polymer core resists chlorine and chloramines. Captive cone washers seal tightly. Exceptionally flexible for fast easy installation. Won't kink or crease in the tightest of spaces. Easy to grip, nickel plated brass hex nuts. Exceeds all pluming code requirements. Meets agency standards. IAPMO Standard, PS74-95, CSA, SBCCI, FDA, NSF-61, A112.18.6 and UPC. Fits-All connector fits four shut-off valve sizes: 3/8", 7/16", 1/2" male compression and 1/2" male iron pipe. Carded. High Bursting strength, each foot of No-Burst contains 220 feet of stainless steel wire. Stainless ferrules are extra-long with added crimps for added security. Non toxic polymer core resists chlorine and chloramines. Captive cone washers seal tightly. Exceptionally flexible for fast easy installation. Won't kink or crease in the tightest of spaces. Easy to grip, nickel plated brass hex nuts. Exceeds all pluming code requirements. Meets agency standards. IAPMO Standard, PS74-95, CSA, SBCCI, FDA, NSF-61, A112.18.6 and UPC.
Plumb Pak PP23836 Dishwasher Connector TOILET REPAIR KIT NO REMOVAL  Fluidmaster 12IM72 Braided Flexible Icemaker Connector
Bulk With Flag Label Works with all 2" toilets. adjustable for maximum performance and water savings, chlorine and hard water resistant. High Bursting strength, each foot of No-Burst contains 250 feet of stainless steel wire. Stainless ferrules are extra-long with added crimps for added security. Non toxic polymer core resists chlorine and chloramines. Captive cone washers seal tightly. Exceptionally flexible for fast easy installation. Won't kink or crease in the tightest of spaces. Easy to grip, nickel plated brass hex nuts. Exceeds all pluming code requirements. Meets agency standards. IAPMO Standard, PS74-95, CSA, SBCCI, FDA, NSF-61, A112.18.6 and UPC.
Danco 89448 Fit Toilet Flush Lever Danco 89450 Toilet Flush Lever Plumb Pak PP23833 Dishwasher Connector
9" arm. Fits most toilets. 9" arm. Fits most toilets. Bulk With Flag Label
Plumb Pak PP25529 Ice Maker Supply Lines Namasco .25X10B Steel Pipe HydroFix HFX120 Toilet Tank Repair Kit
Bulk with flag label. Standard weight, coupled and threaded for ordinary uses in steam, water, gas and air lines. Not for drinking water use.  Ordered by the length only. Includes the HydroClean 660 toilet fill valve, HydroForce flapper, and J-tube. Easy to install. Cleans tank and detects leaks. Fits all toilet brands.
Plumb Pak PP830-3 Anti-Siphon Toilet Tank Repair Kit DRAIN PIPE PERF FLEX 4INX25FT DRAIN PIPE SOLID FLEX 4INX25FT
For 12" or higher tanks. Carded. Exceeds ASTM standards and is made with no-break copolymers for professional grade strength and integrity, Proprietary peak and valley design offers greater surface area and a 30 percent higher load-bearing rating than standard corrugated pipe, Perforated pipe with sock is ideal for French drain application in fine soil, Fittings available to adapt to 3 or 4 in. corrugated pipe and 4 in. PVC, Perfect for tight spaces and curvy places, Taping joints is not necessary. This pipe has spaced slits, so water drains in stages.  It's also perfect for applications such as French drains or dispersing water from flower beds, but works even better in locations where surrounding soil or sand is fine and requires filtration or where debris is considerable. Great for diverting water from one place to another, Water will not seep out until it reaches the end of the pipe.
Genova Products 80031F ABS-DWV Foam Core Pipe HOSE FILL DISHWASHER RED 5FT  Plumb Pak Stylewise PP836-71VBL Fit Toilet Flush Lever
High-impact resistant, lightweight composite foam core for easy 1-step solvent cementing installation. Use with all Genova ABS-DWV fittings. Does not rot, rust, or corrode to keep surface smooth for easy flow. Resists chemicals commonly used in bathrooms and kitchens, unaffected by commonly used household chemicals including drain and bowl cleaners. Conforms to ASTM F 6208-01, NSF Approved. Fit all toilet tank lever - decorative toilet tank lever - faucet handle style - front, angle, or side mount - plastic nut & spud - metal handle with cuttable/bendable brass 8" arm with holes for 4", 6", and 8" application
Fluidmaster 1W60CU Braided Dishwasher Connector Danco 89447A Fit Toilet Flush Lever Plumb Pak PP835-30PCL Round Fit Toilet Bolt Cap
High Bursting strength, each foot of No-Burst contains 250 feet of stainless steel wire. Stainless ferrules are extra-long with added crimps for added security. Non toxic polymer core resists chlorine and chloramines. Captive cone washers seal tightly. Exceptionally flexible for fast easy installation. Won't kink or crease in the tightest of spaces. Easy to grip, nickel plated brass hex nuts. Exceeds all pluming code requirements. Meets agency standards. IAPMO Standard, PS74-95, CSA, SBCCI, FDA, NSF-61, A112.18.6 and UPC. Fits-All connector fits four shut-off valve sizes: 3/8", 7/16", 1/2" male compression and 1/2" male iron pipe. Carded. 9" arm. Fits most toilets. Plumb Pak Toilet Bolt Cap, Round, Universal Fit, Polished Chrome
Plumb Pak K830-16BX Adjustable Floatless Toilet Tank Repair Kit Fluidmaster 6W72 Braided Dishwasher Connector VALVE TOILET/ 3IN FLAPPER ADJ
Fill Valve: Anti-siphon design, adjustable from 9 1/2" to 13 1/2", push-button water level adjustment, safety ring height adjustment,refill tube and clip. Flush Valve: Adjustable from 7-1/2"  to 11-1/2", no cut overflow tube, timing cone, water saver flapper with chain and hook. Tank to Bowl Kit: For 2 or 3 bolt toilets. Includes bolts, nuts washers and sponge gasket. High Bursting strength, each foot of No-Burst contains 220 feet of stainless steel wire. Stainless ferrules are extra-long with added crimps for added security. Non toxic polymer core resists chlorine and chloramines. Captive cone washers seal tightly. Exceptionally flexible for fast easy installation. Won't kink or crease in the tightest of spaces. Easy to grip, nickel plated brass hex nuts. Exceeds all pluming code requirements. Meets agency standards. IAPMO Standard, PS74-95, CSA, SBCCI, FDA, NSF-61, A112.18.6 and UPC. Features ultra quite fill, 3" adjustable flapper. Silicone seal,
Plumb Pak Stylewise PP836-74VBL Fit Toilet Flush Lever FILL VALVE W/ 3IN FLAPPER KIT HOSE FILL DSHWSHR UNIV 5FT
Front, angle, or side mount - plastic nut & spud - metal handle with cuttable/bendable brass 8" arm with holes for 4", 6", and 8" applications. Complete with a high performance fill valve designed to fit 99% of toilets and an adjustable, longest lasting 3? flapper, the Korky QuietFILL Platinum Fill Valve and 3" Flapper Kit is designed to fix the two most commonly replaced parts in a toilet. Easy to install, the fill valve is designed to fix no/slow refilling, running, and noisy toilets. Quieter than other fill valves, the QuietFILL Platinum Valve is ideal for toilets since 1994 (1.6 GPF or less). It is fully adjustable to prevent water waste in all toilets. The refill adjuster delivers the right amount of water to the bowl to maintain original performance. This toilet fill valve is easy to install and adjust; no tools are required. It has a universal design and will fit oversized 3" flush valves found in newer 1.6 and 1.28 gpf toilets since the year 2005. The exclusive longest lasting red rubber resists chlorine, bacteria, city water treatment, hard water, and well water. The kit is designed to fit Kohler, TOTO, American Standard and all other brands. The 830MP includes: (1) 528MP Fill Valve, (1) 3060BP 3" Flapper, (1) Refill Tube, (1) Metal Refill Tube Clip, (1) Mounting Nut, (1) Cone Washer, (1) Coupling Nut, (1) Tamper Proof Key and (1) Instructions.
LINE SUPPLY ICE MAKER 20FT SS Namasco BLACK-3/4 Pipe TOILET HNDL 8-3/4 CHROME KOHLR
Standard weight, coupled and threaded for ordinary uses in steam, water, gas and air lines. Not for drinking water use.  Ordered by the length only. Brass construction, 8-3/4" maximum flush arm length.
Fluidmaster 400AK/R Toilet Tank Repair Kit Fluidmaster 1W72CU Braided Dishwasher Connector Fluidmaster 12IM120 Braided Flexible Icemaker Connector