Home > PLUMBING > ROUGH PLUMBING SUPPLIES > PIPE FITTINGS > BRASS FLARE FITTINGS
Choose a sub category:
BRASS FLARE - PLUGS PVC SCH80 FITTINGS - UNIONS BRASS FLARE - CAPS
PVC SCH80 FITTINGS - TEES & CR BRASS FLARE - UNIONS PVC SCH80 PIPE NIPPLES
BRASS FLARE - NUTS BRASS FLARE - SWIVEL CONNECTOR BRASS FLARE - ADAPTERS
BRASS FLARE - MALE CONNECTORS BRASS FLARE - FEMALE CONNECTOR BRASS FLARE - ELBOWS
BRASS FLARE - TEES
Sort By:
1
Genova Products 70115 PVC-DWV Coupling Genova 300 Pipe Nipple Genova 300 Pipe Nipple
Used in drain-waste-vent applications to join straight lengths of pipe. Gray fittings used for sprinkler systems where an extension is needed for the sprinkler head to be above ground level. Also may be used to prevent damage to the sprinkler head. Teflon thread tape is recommended for threaded joints. Gray fittings used for sprinkler systems where an extension is needed for the sprinkler head to be above ground level. Also may be used to prevent damage to the sprinkler head. Teflon thread tape is recommended for threaded joints.
Genova Products 70120 PVC-DWV Coupling Genova 300 Pipe Nipple Genova 300 Pipe Nipple
Used in drain-waste-vent applications to join straight lengths of pipe. Gray fittings used for sprinkler systems where an extension is needed for the sprinkler head to be above ground level. Also may be used to prevent damage to the sprinkler head. Teflon thread tape is recommended for threaded joints. Gray fittings used for sprinkler systems where an extension is needed for the sprinkler head to be above ground level. Also may be used to prevent damage to the sprinkler head. Teflon thread tape is recommended for threaded joints.
Genova 300 Pipe Nipple Genova Products 72815 PVC-DWV 90 Deg Sanitary Elbow Genova 300 Pipe Nipple
Gray fittings used for sprinkler systems where an extension is needed for the sprinkler head to be above ground level. Also may be used to prevent damage to the sprinkler head. Teflon thread tape is recommended for threaded joints. Used to change direction in piping in drain-waste-vent applications. Sometimes called a quarter bend. Gray fittings used for sprinkler systems where an extension is needed for the sprinkler head to be above ground level. Also may be used to prevent damage to the sprinkler head. Teflon thread tape is recommended for threaded joints.
Genova 300 Pipe Nipple Genova 300 Pipe Nipple Genova 300 Pipe Nipple
Gray fittings used for sprinkler systems where an extension is needed for the sprinkler head to be above ground level. Also may be used to prevent damage to the sprinkler head. Teflon thread tape is recommended for threaded joints. Gray fittings used for sprinkler systems where an extension is needed for the sprinkler head to be above ground level. Also may be used to prevent damage to the sprinkler head. Teflon thread tape is recommended for threaded joints. Gray fittings used for sprinkler systems where an extension is needed for the sprinkler head to be above ground level. Also may be used to prevent damage to the sprinkler head. Teflon thread tape is recommended for threaded joints.
Genova 300 Pipe Nipple Genova 300 Pipe Nipple Genova 300 Pipe Nipple
Gray fittings used for sprinkler systems where an extension is needed for the sprinkler head to be above ground level. Also may be used to prevent damage to the sprinkler head. Teflon thread tape is recommended for threaded joints. Gray fittings used for sprinkler systems where an extension is needed for the sprinkler head to be above ground level. Also may be used to prevent damage to the sprinkler head. Teflon thread tape is recommended for threaded joints. Gray fittings used for sprinkler systems where an extension is needed for the sprinkler head to be above ground level. Also may be used to prevent damage to the sprinkler head. Teflon thread tape is recommended for threaded joints.
Genova Products 70615 PVC-DWV 45 Degree Elbow Genova Products 73615 PVC-DWV 45 Degree Sanitary Elbow Genova 300 Pipe Nipple
Used to change direction in piping in drain-waste-vent applications. Sometimes called an eighth bend. Used to change direction in piping in drain-waste-vent applications. Sometimes called an eighth bend. Gray fittings used for sprinkler systems where an extension is needed for the sprinkler head to be above ground level. Also may be used to prevent damage to the sprinkler head. Teflon thread tape is recommended for threaded joints.
Genova Products 72820 PVC-DWV 90 Degree Sanitary Elbow Genova Products 72715 PVC-DWV 45 Degree Street Elbow Genova 300 Pipe Nipple
Used to change direction in piping in drain-waste-vent applications. Sometimes called a quarter bend. Used to change direction from a fitting hub to a pipe in drain-waste-vent applications. Sometimes called a street eighth bend. Gray fittings used for sprinkler systems where an extension is needed for the sprinkler head to be above ground level. Also may be used to prevent damage to the sprinkler head. Teflon thread tape is recommended for threaded joints.
Genova Products 73620 PVC-DWV 45 Degree Sanitary Elbow Genova 300 Pipe Nipple Genova 300 Pipe Nipple
Used to change direction in piping in drain-waste-vent applications. Sometimes called an eighth bend. Gray fittings used for sprinkler systems where an extension is needed for the sprinkler head to be above ground level. Also may be used to prevent damage to the sprinkler head. Teflon thread tape is recommended for threaded joints. Gray fittings used for sprinkler systems where an extension is needed for the sprinkler head to be above ground level. Also may be used to prevent damage to the sprinkler head. Teflon thread tape is recommended for threaded joints.
Genova Products 70620 PVC-DWV 45 Degree Elbow Genova 300 Pipe Nipple Genova 300 Pipe Nipple
Used to change direction in piping in drain-waste-vent applications. Sometimes called an eighth bend. Gray fittings used for sprinkler systems where an extension is needed for the sprinkler head to be above ground level. Also may be used to prevent damage to the sprinkler head. Teflon thread tape is recommended for threaded joints. Gray fittings used for sprinkler systems where an extension is needed for the sprinkler head to be above ground level. Also may be used to prevent damage to the sprinkler head. Teflon thread tape is recommended for threaded joints.
Genova 300 Pipe Nipple Genova Products 72720 PVC-DWV 45 Degree Street Elbow Genova 300 Pipe Nipple
Gray fittings used for sprinkler systems where an extension is needed for the sprinkler head to be above ground level. Also may be used to prevent damage to the sprinkler head. Teflon thread tape is recommended for threaded joints. Used to change direction from a fitting hub to a pipe in drain-waste-vent applications. Sometimes called a street eighth bend. Gray fittings used for sprinkler systems where an extension is needed for the sprinkler head to be above ground level. Also may be used to prevent damage to the sprinkler head. Teflon thread tape is recommended for threaded joints.
Genova 300 Pipe Nipple Genova 72716 PVC-DWV Fitting Genova Products 70121 PVC-DWV Reducer Coupling
Gray fittings used for sprinkler systems where an extension is needed for the sprinkler head to be above ground level. Also may be used to prevent damage to the sprinkler head. Teflon thread tape is recommended for threaded joints. Used to change direction from a fitting hub to a pipe in drain-waste-vent applications. Sometimes called a street eighth bend. Used in drain-waste-vent applications to reduce or increase pipe sizes.
Genova 300 Pipe Nipple Genova 300 Pipe Nipple Genova 300 Pipe Nipple
Gray fittings used for sprinkler systems where an extension is needed for the sprinkler head to be above ground level. Also may be used to prevent damage to the sprinkler head. Teflon thread tape is recommended for threaded joints. Gray fittings used for sprinkler systems where an extension is needed for the sprinkler head to be above ground level. Also may be used to prevent damage to the sprinkler head. Teflon thread tape is recommended for threaded joints. Gray fittings used for sprinkler systems where an extension is needed for the sprinkler head to be above ground level. Also may be used to prevent damage to the sprinkler head. Teflon thread tape is recommended for threaded joints.
Genova 300 Pipe Nipple Genova 70116 PVC-DWV Fitting Genova Products 72916 PVC-DWV 90 Degree Sanitary Elbow
Gray fittings used for sprinkler systems where an extension is needed for the sprinkler head to be above ground level. Also may be used to prevent damage to the sprinkler head. Teflon thread tape is recommended for threaded joints. Furnished without center stop so that stationary lengths of pipe can be spliced together. Used in drain waste vent applications. Used to change direction in piping in drain-waste-vent applications. Sometimes called a street quarter bend.
Genova 300 Pipe Nipple Genova Products 70130 PVC-DWV Coupling Genova 300 Pipe Nipple
Gray fittings used for sprinkler systems where an extension is needed for the sprinkler head to be above ground level. Also may be used to prevent damage to the sprinkler head. Teflon thread tape is recommended for threaded joints. Used in drain-waste-vent applications to join straight lengths of pipe. Gray fittings used for sprinkler systems where an extension is needed for the sprinkler head to be above ground level. Also may be used to prevent damage to the sprinkler head. Teflon thread tape is recommended for threaded joints.
Genova Products 70815 PVC-DWV 22-1/2 Degree Elbow Genova 300 Pipe Nipple Genova 300 Pipe Nipple
Used to change direction in piping in drain-waste-vent applications. Sometimes called a sixteenth bend. Gray fittings used for sprinkler systems where an extension is needed for the sprinkler head to be above ground level. Also may be used to prevent damage to the sprinkler head. Teflon thread tape is recommended for threaded joints. Gray fittings used for sprinkler systems where an extension is needed for the sprinkler head to be above ground level. Also may be used to prevent damage to the sprinkler head. Teflon thread tape is recommended for threaded joints.
Genova 300 Pipe Nipple Genova 300 Pipe Nipple Genova 300 Pipe Nipple
Gray fittings used for sprinkler systems where an extension is needed for the sprinkler head to be above ground level. Also may be used to prevent damage to the sprinkler head. Teflon thread tape is recommended for threaded joints. Gray fittings used for sprinkler systems where an extension is needed for the sprinkler head to be above ground level. Also may be used to prevent damage to the sprinkler head. Teflon thread tape is recommended for threaded joints. Gray fittings used for sprinkler systems where an extension is needed for the sprinkler head to be above ground level. Also may be used to prevent damage to the sprinkler head. Teflon thread tape is recommended for threaded joints.
Genova 70122 PVC-DWV Fitting Genova Products 70715 PVC-DWV 90 Degree Elbow Genova 300 Pipe Nipple
Furnished without center stop so that stationary lengths of pipe can be spliced together. Used in drain waste vent applications. Used to change direction in the dry portion of vent piping where water flow is not a consideration. Sometimes called a short turn quarter bend. Gray fittings used for sprinkler systems where an extension is needed for the sprinkler head to be above ground level. Also may be used to prevent damage to the sprinkler head. Teflon thread tape is recommended for threaded joints.
Mintcraft 8317-B Plungers Genova 300 Pipe Nipple Genova 300 Pipe Nipple
Force black rubber cup, 9" wood handle. Gray fittings used for sprinkler systems where an extension is needed for the sprinkler head to be above ground level. Also may be used to prevent damage to the sprinkler head. Teflon thread tape is recommended for threaded joints. Gray fittings used for sprinkler systems where an extension is needed for the sprinkler head to be above ground level. Also may be used to prevent damage to the sprinkler head. Teflon thread tape is recommended for threaded joints.
Genova 300 Pipe Nipple Genova 300 Pipe Nipple Genova Products 72926 PVC-DWV  90 Deg Street Elbow
Gray fittings used for sprinkler systems where an extension is needed for the sprinkler head to be above ground level. Also may be used to prevent damage to the sprinkler head. Teflon thread tape is recommended for threaded joints. Gray fittings used for sprinkler systems where an extension is needed for the sprinkler head to be above ground level. Also may be used to prevent damage to the sprinkler head. Teflon thread tape is recommended for threaded joints. Used to change direction in piping in drain-waste-vent applications. Sometimes called a street quarter bend.
Anderson Metal 754014-06 Brass Flare Fittings Genova 70915 PVC-DWV Fitting Genova 72920 PVC-DWV Fitting
UPC individually bagged. Used to change direction in piping in drain-waste-vent applications. Sometimes called a sixth bend. Used to change direction in dry portion of vent piping where water flow is not a consideration. Also called a "short turn street quarter bend".
Anderson Metal 754042-05 Brass Flare Union Genova 300 Pipe Nipple Genova 300 Pipe Nipple
UPC individually bagged. Gray fittings used for sprinkler systems where an extension is needed for the sprinkler head to be above ground level. Also may be used to prevent damage to the sprinkler head. Teflon thread tape is recommended for threaded joints. Gray fittings used for sprinkler systems where an extension is needed for the sprinkler head to be above ground level. Also may be used to prevent damage to the sprinkler head. Teflon thread tape is recommended for threaded joints.
Genova Products 70820 PVC-DWV 22-1/2 Degree Elbow Genova 300 Pipe Nipple Genova 300 Pipe Nipple
Used to change direction in piping in drain-waste-vent applications. Sometimes called a sixteenth bend. Gray fittings used for sprinkler systems where an extension is needed for the sprinkler head to be above ground level. Also may be used to prevent damage to the sprinkler head. Teflon thread tape is recommended for threaded joints. Gray fittings used for sprinkler systems where an extension is needed for the sprinkler head to be above ground level. Also may be used to prevent damage to the sprinkler head. Teflon thread tape is recommended for threaded joints.
Genova 300 Pipe Nipple Genova 300 Pipe Nipple Genova 300 Pipe Nipple
Gray fittings used for sprinkler systems where an extension is needed for the sprinkler head to be above ground level. Also may be used to prevent damage to the sprinkler head. Teflon thread tape is recommended for threaded joints. Gray fittings used for sprinkler systems where an extension is needed for the sprinkler head to be above ground level. Also may be used to prevent damage to the sprinkler head. Teflon thread tape is recommended for threaded joints. Gray fittings used for sprinkler systems where an extension is needed for the sprinkler head to be above ground level. Also may be used to prevent damage to the sprinkler head. Teflon thread tape is recommended for threaded joints.
Genova Products 70720 PVC-DWV 90 Degree Elbow Genova 700 Dwv Pipe Cap Genova 300 Pipe Nipple
Used to change direction in the dry portion of vent piping where water flow is not a consideration. Sometimes called a short turn quarter bend. Used for permanently or temporarily capping pipe in drain-waste-vent applications. Gray fittings used for sprinkler systems where an extension is needed for the sprinkler head to be above ground level. Also may be used to prevent damage to the sprinkler head. Teflon thread tape is recommended for threaded joints.
Genova Products 70140 PVC-DWV Coupling Genova 300 Pipe Nipple Genova 300 Pipe Nipple
Used in drain-waste-vent applications to join straight lengths of pipe. Gray fittings used for sprinkler systems where an extension is needed for the sprinkler head to be above ground level. Also may be used to prevent damage to the sprinkler head. Teflon thread tape is recommended for threaded joints. Gray fittings used for sprinkler systems where an extension is needed for the sprinkler head to be above ground level. Also may be used to prevent damage to the sprinkler head. Teflon thread tape is recommended for threaded joints.
Genova 300 Pipe Nipple Genova 300 Pipe Nipple Genova 300 Pipe Nipple
Gray fittings used for sprinkler systems where an extension is needed for the sprinkler head to be above ground level. Also may be used to prevent damage to the sprinkler head. Teflon thread tape is recommended for threaded joints. Gray fittings used for sprinkler systems where an extension is needed for the sprinkler head to be above ground level. Also may be used to prevent damage to the sprinkler head. Teflon thread tape is recommended for threaded joints. Gray fittings used for sprinkler systems where an extension is needed for the sprinkler head to be above ground level. Also may be used to prevent damage to the sprinkler head. Teflon thread tape is recommended for threaded joints.
Genova 300 Pipe Nipple Genova Products 73815 PVC-DWV 90 Deg Long Sweep Elbow Genova Products 73820 PVC-DWV 90 Deg Long Sweep Elbow
Gray fittings used for sprinkler systems where an extension is needed for the sprinkler head to be above ground level. Also may be used to prevent damage to the sprinkler head. Teflon thread tape is recommended for threaded joints. Used to change direction in piping in drain-waste-vent applications. Sometimes called a long turn quarter bend. Used to change direction in piping in drain-waste-vent applications. Sometimes called a long turn quarter bend.
Genova 70920 PVC-DWV Fitting Genova Products 72830 PVC-DWV 90 Degree Sanitary Elbow Genova Products 70630 PVC-DWV 45 Degree Elbow
Used to change direction in piping in drain-waste-vent applications. Sometimes called a sixth bend. Used to change direction in piping in drain-waste-vent applications. Sometimes called a quarter bend. Used to change direction in piping in drain-waste-vent applications. Sometimes called an eighth bend.
Genova 300 Pipe Nipple Genova 300 Pipe Nipple Genova 300 Pipe Nipple
Gray fittings used for sprinkler systems where an extension is needed for the sprinkler head to be above ground level. Also may be used to prevent damage to the sprinkler head. Teflon thread tape is recommended for threaded joints. Gray fittings used for sprinkler systems where an extension is needed for the sprinkler head to be above ground level. Also may be used to prevent damage to the sprinkler head. Teflon thread tape is recommended for threaded joints. Gray fittings used for sprinkler systems where an extension is needed for the sprinkler head to be above ground level. Also may be used to prevent damage to the sprinkler head. Teflon thread tape is recommended for threaded joints.
Genova Products 72730 PVC-DWV 45 Degree Street Elbow Genova 300 Pipe Nipple Mintcraft 8318-B Toilet Plungers
Used to change direction from a fitting hub to a pipe in drain-waste-vent applications. Sometimes called a street eighth bend. Gray fittings used for sprinkler systems where an extension is needed for the sprinkler head to be above ground level. Also may be used to prevent damage to the sprinkler head. Teflon thread tape is recommended for threaded joints. Force black cup, 21" wood handle.
Genova 700 Dwv Pipe Cap Anderson Metal 754046-0502 Brass Flare Coupling Anderson Metal 754822-0606 Brass Flare Fitting
Used for permanently or temporarily capping pipe in drain-waste-vent applications. UPC individually bagged. Anderson Tube Adapter, 3/8 in Nominal Size, Flared x Compression, Brass
Genova Products 70132 PVC-DWV Reducing Coupling Anderson Metal 54802-06 Brass Flare Fittings Genova 300 Pipe Nipple
Used in drain-waste-vent applications to reduce or increase pipe sizes. Two piece construction - nut and body. Use with copper, brass, aluminum, or steel tubing. -65 degrees F. to +250 degrees F. temperature range. Resists mechanical pullout. Easy to disassemble and can be re-assembled many times with no effect on the seal. No flaring tool required. Primary uses fuel equipment, plumbing, gases refrigeration, and vacuum. UPC individually bagged. Gray fittings used for sprinkler systems where an extension is needed for the sprinkler head to be above ground level. Also may be used to prevent damage to the sprinkler head. Teflon thread tape is recommended for threaded joints.
Genova 75815 PVC-DWV Fitting Genova 300 Pipe Nipple Genova Products 70131 PVC-DWV Reducer Coupling
Used to change direction in piping. Also called a street sixteenth bend. Gray fittings used for sprinkler systems where an extension is needed for the sprinkler head to be above ground level. Also may be used to prevent damage to the sprinkler head. Teflon thread tape is recommended for threaded joints. Used in drain-waste-vent applications to reduce or increase pipe sizes.
Genova 300 Pipe Nipple Genova 75820 PVC-DWV Fitting Genova 700 Dwv Pipe Cap
Gray fittings used for sprinkler systems where an extension is needed for the sprinkler head to be above ground level. Also may be used to prevent damage to the sprinkler head. Teflon thread tape is recommended for threaded joints. Used to change direction in piping. Also called a street sixteenth bend. Used for permanently or temporarily capping pipe in drain-waste-vent applications.
Anderson 754055-06 2-Way Tube Elbow Genova 300 Pipe Nipple Genova 300 Pipe Nipple
UPC individually bagged. Gray fittings used for sprinkler systems where an extension is needed for the sprinkler head to be above ground level. Also may be used to prevent damage to the sprinkler head. Teflon thread tape is recommended for threaded joints. Gray fittings used for sprinkler systems where an extension is needed for the sprinkler head to be above ground level. Also may be used to prevent damage to the sprinkler head. Teflon thread tape is recommended for threaded joints.
Genova Products 70640 PVC-DWV 45 Degree Elbow Genova Products 70830 PVC-DWV 22-1/2 Degree Elbow Master Plunger MPS4 Sink and Tub Plunger
Used to change direction in piping in drain-waste-vent applications. Sometimes called an eighth bend. Used to change direction in piping in drain-waste-vent applications. Sometimes called a sixteenth bend. Small for sinks, showers, and floors drains. Moves 3 times more displacement and holds a better seal than the standard rubber cup plunger.
Genova Products 72840 PVC-DWV  90 Deg Sanitary Elbow Genova 700 Solvent Weld Sewer Pipe Adapter Coupling Genova Products 72936 PVC-DWV  90 Deg Street Elbow
Used to change direction in piping in drain-waste-vent applications. Sometimes called a quarter bend. Adapts Schedule 40 IPS pipe to 4" sewer pipe. Used to change direction in piping in drain-waste-vent applications. Sometimes called a street quarter bend.
Genova Products 72834 PVC-DWV Closet Bend Anderson Metal 754042-10 Brass Flare Union Genova Products 70133 PVC-DWV Repair Coupling
Used to change direction in piping as well as size. Usually utilized to convert from 3" horizontal pipe to 4" vertical pipe directly under the toilet. UPC individually bagged. Furnished without center stop so that stationary lengths of pipe can be spliced together. Used in drain waste vent applications.
Genova 300 Pipe Nipple Genova Products 72740 PVC-DWV 45 Degree Street Elbow Mintcraft TP6063L Toilet Plungers
Gray fittings used for sprinkler systems where an extension is needed for the sprinkler head to be above ground level. Also may be used to prevent damage to the sprinkler head. Teflon thread tape is recommended for threaded joints. Used to change direction from a fitting hub to a pipe in drain-waste-vent applications. Sometimes called a street eighth bend. Blue cup,19" plastic handle.
Mintcraft 8324-B-D3L Plunger Genova 700 Solvent Weld Sewer Pipe Adapter Coupling Genova Products 73830 PVC-DWV 90 Deg Long Sweep Elbow
Black rubber cup, 21" wood handle. Adapts Schedule 40 IPS pipe to 4" sewer pipe. Used to change direction in piping in drain-waste-vent applications. Sometimes called a long turn quarter bend.
Anderson 754050-0806 Tube Elbow Genova Products 70142 PVC-DWV Reducing Coupling Tank Master 090300 Power Plunger
UPC individually bagged. Used in drain-waste-vent applications to reduce or increase pipe sizes. Flexible black rubber cup with 21" yellow wood handle. Works at all angles to clean clogged toilets in a hurry.
Genova Products 70143 PVC-DWV Reducing Coupling Genova Products 70144 PVC-DWV Repair Coupling Genova Products 70730 PVC-DWV 90 Degree Elbow
Used in drain-waste-vent applications to reduce or increase pipe sizes. Furnished without center stop so that stationary lengths of pipe can be spliced together. Used in drain waste vent applications. Used to change direction in the dry portion of vent piping where water flow is not a consideration. Sometimes called a short turn quarter bend.
Genova Products 70930 PVC-DWV 60 Degree Elbow Master Plunger MP100-1 Drain Plunger Genova Products 70840 PVC-DWV 22-1/2 Degree Elbow
Used to change direction in piping in drain-waste-vent applications. Sometimes called a sixth bend. Unique bellows delivers more plunge power per push. Nose funnel directs plunge blast down the drain - not out the side of plunger. Pommel top handle you can really get a grip on. Super-strong polyethylene construction. Fits all toilet bowls. Used to change direction in piping in drain-waste-vent applications. Sometimes called a sixteenth bend.
Genova 700 Dwv Pipe Cap Master Plunger MP1600 Toilet Plunger Genova 79230 Dwv Floor Strainer
Used for permanently or temporarily capping pipe in drain-waste-vent applications. Designed for low-volume 1.6-gallon toilets. Extended funnel nose design ensures a perfect seal and prevents unwanted slippage and splash back. 83 cubic inch displacement takes care of the toughest clogs, fast. Prevents debris from entering a drain opening on the floor. Fits flush into any fitting hub flush to the floor.
Genova 73131 PVC-DWV Fitting Genova 75830 PVC-DWV Fitting Master Plunger MP500-B4 Plunger
Used to connect a branch line or vent at a change of direction in a larger vertical or horizontal pipe. The inlet is constructed to accept a 2" fitting over its outside diameter or an 1?" pipe into its inside diameter. Used to change direction in piping. Also called a street sixteenth bend. All-purpose residential plunger designed to fit all drains even hard-to-reach bathroom sink drains. Streamline design can easily flex under the waterspout to clear drains. Storage bucket included.
Genova 70940 PVC-DWV Fitting Genova Products 72946 PVC-DWV  90 Deg Street Elbow Genova Products 70160 PVC-DWV Coupling
Used to change direction in piping in drain-waste-vent applications. Sometimes called a sixth bend. Used to change direction in piping in drain-waste-vent applications. Sometimes called a street quarter bend. Used in drain-waste-vent applications to join straight lengths of pipe.
Genova 79240 Dwv Floor Strainer Anderson Metal 754040-08 Brass Flare Cap Cobra Plunge-It 00300 Air Powered Plunger
Prevents debris from entering a drain opening on the floor. Fits flush into any fitting hub flush to the floor. UPC individually bagged. Clears clogged toilets, sinks, shower and tub drains.
Genova 72934 PVC-DWV Fitting Genova 73032 PVC-DWV Fitting Anderson Metals 754039-06 Flare plug
Used to change direction in piping and size of pipe directly into fitting hub; usually a closet flange directly under a toilet. Works well in tight space applications on second floors. Used to connect a branch line or vent at a change of direction in a larger vertical or horizontal pipe. UPC individually bagged.
Genova Products 73840 PVC-DWV 90 Deg Long Sweep Elbow Quickie 360MB Plunger and Caddy With Microban Anderson Metal 754040-04 Brass Flare Cap
Used to change direction in piping in drain-waste-vent applications. Sometimes called a long turn quarter bend. Treated with Microban Antimicrobial Product Protection. Fights odor-causing bacteria, mold and mildew. Soft rubber plunger head with extension flange for extra suction. Ergonomic soft-grip handle. Fashion-forward taupe color. High gloss designer caddy ensures vertical storage. UPC individually bagged.
Genova 75840 PVC-DWV Fitting Anderson Metals 754039-04 Flare plug Anderson Metal 754014-04 Brass Flare Nut
Used to change direction in piping. Also called a street sixteenth bend. UPC individually bagged. UPC individually bagged.
Korky 99-4A Toilet Plunger Anderson Metal 754014-08 Brass Flare Fittings Anderson Metal 754048-0608 Brass Flare Fittings
Proudly designed and made in the United States, the BEEHIVE Max Toilet Plunger is the first plunger designed to fit both old and new high efficiency toilets (HET). Toilet bowl drains have changed from round to oblong shaped outlets and standard plungers on the market cannot achieve a seal to effectively plunge. The t.handle and flexible, beehive shape head design, allow for an optimum grip and effective plunge in any toilet. Recommended by Kohler, the BEEHIVE Max Plunger fits Kohler, TOTO, American Standard, Mansfield and all other brands. As seen in This Old House? . Top 100 Best New Home Products of 2014. The 99.4 includes: (1) T.Handle and (1) Plunger Head. UPC individually bagged. UPC individually bagged.
Anderson Metal 754014-10 Brass Flare Fittings Anderson Metal 754046-0806 Brass Flare Coupling Anderson Metal 754048-0806 Brass Flare Connector
UPC individually bagged. UPC individually bagged. UPC individually bagged.
Anderson Metals 754039-08 Flare plug Genova 700 Dwv Pipe Cap Anderson Metal 754018-04 Brass Flare Fitting
UPC individually bagged. Used for permanently or temporarily capping pipe in drain-waste-vent applications. UPC individually bagged.
Anderson Metal 754046-0608 Brass Flare Fitting Anderson Metal 754014-05 Brass Flare Nut Anderson Metal 754042-04 Brass Flare Union
UPC individually bagged. UPC individually bagged. UPC individually bagged.
Anderson Metal 754048-0402 Brass Flare Connectors Anderson Metal 754040-10 Brass Flare Cap Genova 70660 PVC-DWV Fitting
UPC individually bagged. UPC individually bagged. Used to change direction in piping in drain-waste-vent applications. Sometimes called an eighth bend.
Anderson Metal 754056-0604 Brass Flare Fitting Genova 72915 PVC-DWV Fitting Anderson Metal 754048-0808 Brass Flare Fittings
UPC individually bagged. Used to change direction in dry portion of vent piping where water flow is not a consideration. Also called a "short turn street quarter bend". UPC individually bagged.
Anderson Metal 754044-04 Brass Flare Tee TOILET PLUNGER W/HOLDER       Anderson Metal 754042-08 Brass Flare Fittings
UPC individually bagged. Proudly designed and made in the United States, the BEEHIVE Max Toilet Plunger is the first plunger designed to fit both old and new high efficiency toilets (HET). Toilet bowl drains have changed from round to oblong shaped outlets and standard plungers on the market cannot achieve a seal to effectively plunge. The t.handle and flexible, beehive shape head design, allow for an optimum grip and effective plunge in any toilet. Recommended by Kohler, the BEEHIVE Max Plunger fits Kohler, TOTO, American Standard, Mansfield and all other brands. As seen in This Old House? . Top 100 Best New Home Products of 2014. The plunger holder offers concealed storage and for a drip free carry. The 99.4 includes: (1) T.Handle, (1) Plunger Head and (1) Plunger Holder. UPC individually bagged.
Anderson Metals 754039-10 Flare plug Anderson Metal 754020-0806 Brass Flare Nut Genova Products 72860 PVC-DWV  90 Deg Sanitary Elbow
UPC individually bagged. UPC individually bagged. Used to change direction in piping in drain-waste-vent applications. Sometimes called a quarter bend.
Foremost WW19R Right Hand Sidesplash Foremost WW19L Left Hand Sidesplash Foremost WW-22L Left Hand Sidesplash
Dimensions: 3-1/2"h x 3/4"d. Dimensions: 3-1/2"h x 3/4"d. Dimensions: 3-1/2"h x 3/4"d.
Foremost WS22R Right Hand Sidesplash Foremost WS22L Left Hand Sidesplash Foremost WS19L Left Hand Sidesplash
Dimensions: 3-1/2"h x 3/4"d. Dimensions: 3-1/2"h x 3/4"d. Dimensions: 3-1/2"h x 3/4"d.
Foremost WS19R Right Hand Sidesplash Foremost WW-22R Right Hand Sidesplash Anderson Metal 754040-06 Brass Flare Fitting
Dimensions: 3-1/2"h x 3/4"d. Dimensions: 3-1/2"h x 3/4"d. UPC individually bagged.
Anderson Metal 754046-0808 Brass Flare Fitting Anderson Metal 754048-1008 Brass Flare Fittings Anderson Metal 754048-0804 Brass Flare Fitting
UPC individually bagged. UPC individually bagged. UPC individually bagged.
Anderson Metals 754070-04 Swivel Tube to Hose Adapter Zenith X311 Swing Door Medicine Cabinet Anderson Metal 754018-10 Brass Flare Nut
UPC individually bagged. Plastic body with three fixed plastic shelves, stainless steel frame,  left or right door opening, magnet closure mechanism, fully assembled. Assembled dimensions:  16.13"W x 20.13"H x 3.25"D. Rough wall opening: 17.5"h x 13.5"w. Body dimensions:18.88"H x 14.88"W x  3?D. Recess depth: 2.5". UPC individually bagged.
Anderson Metal 754046-0402 Brass Flare Coupling Anderson Metals 754070-06 Swivel Tube to Hose Adapter Anderson Metal 754046-0612 Brass Flare Coupling
UPC individually bagged. UPC individually bagged. UPC individually bagged.
Anderson Metal 754020-0604 Brass Flare Reducing Nut Anderson Metal 754056-0806 Brass Flare Fitting Anderson Metal 754048-0404 Brass Flare Connectors
UPC individually bagged. UPC individually bagged. UPC individually bagged.
Genova 72760 PVC-DWV Fitting Anderson 754049-0608 Tube Elbow Anderson Metal 754048-0612 Brass Flare Connectors
Used to change direction from a fitting hub to a pipe in drain-waste-vent applications. Sometimes called a street eighth bend. UPC individually bagged. UPC individually bagged.
Anderson Metal 754046-0404 Brass Flare Coupling Anderson Metal 754046-1008 Brass Flare Coupling Anderson Metal 754018-06 Brass Flare Fitting
UPC individually bagged. UPC individually bagged. UPC individually bagged.
Anderson Metal 754048-0812 Brass Flare Connectors Anderson 754049-0402 Tube Elbow Anderson Metal 754046-0604 Brass Flare Coupling
UPC individually bagged. UPC individually bagged. UPC individually bagged.
Anderson Metal 754044-06 Brass Flare Tee Anderson Metal 754044-05 Brass Flare Fitting Anderson Metal 754048-1012 Brass Flare Connectors
UPC individually bagged. UPC individually bagged. UPC individually bagged.
Anderson Metal 754046-1012 Brass Flare Coupling Anderson Metal 754056-1008 Brass Flare Reducing Union Anderson 754049-0404 Tube Elbow
UPC individually bagged. UPC individually bagged. UPC individually bagged.
Anderson 754049-0808 Tube Elbow Anderson 754049-0806 Tube Elbow Anderson 754055-08 2-Way Tube Elbow
UPC individually bagged. UPC individually bagged. UPC individually bagged.
Anderson Metal 754048-0604 Brass Flare Fitting Anderson 754050-0808 Tube Elbow Anderson Metal 754046-0606 Brass Flare Coupling
UPC individually bagged. UPC individually bagged. UPC individually bagged.
Anderson Metals 754070-08 Swivel Tube to Hose Adapter Anderson Metal 754048-0606 Brass Flare Fittings Zenith 105 Swing Door Medicine Cabinet
UPC individually bagged. UPC individually bagged. 2 adjustable shelves, poly body, surface or recess mount, 16.13"W x 26.13"H x 4-1/2"D. Rough wall opening: 13" x 23".
Anderson Metal 754044-08 Brass Flare Tee Korky 98-4A Decorative Plunger Anderson 754049-0604 Reducing Tube Elbow
UPC individually bagged. The Decorative Gray Plunger with White Plastic Handle is constructed of a non.marking rubber and offers a T.handle that allows for an optimum grip and effective plunge. The 98.4 includes: (1) T.Handle and (1) 6" Gray Plunger Cup. UPC individually bagged.
Anderson Metals 754070-10 Swivel Tube to Hose Adapter Anderson Metal 754042-06 Brass Flare Fittings Anderson Metal 754046-0812 Brass Flare Coupling
UPC individually bagged. UPC individually bagged. UPC individually bagged.
Anderson Metal 754018-08 Brass Flare Fittings Anderson 754050-0812 Tube Elbow Zenith X314 Swing Door Medicine Cabinet
UPC individually bagged. UPC individually bagged. White metal frame, stainless steel body, two adjustable clear plastic shelves, left or right door opening, magnet closure mechanism, fully assembled. Assembled dimensions: 22.13"H X 16.13"W X 4.5"D. Rough wall opening:17.5"h x 13.25"w. Body dimensions: 19.5"h x 15.25"w x 4.25"d. Recess depth: 3.5".
Zenith MP109 Beveled Mirrored Frameless Swing Door Medicine Cabinet Zenith W231 Medicine Cabinet With Baskets Anderson 754049-1008 Reducing Tube Elbow