Home > HAND TOOLS > STRIKING AND CUTTING TOOLS > RIPPING/CHISELING
Choose a sub category:
WRECKING BARS WRECKING BARS WRECKING BARS
WRECKING BARS WRECKING BARS WRECKING BARS
WRECKING BARS WRECKING BARS WRECKING BARS
PRY BARS AND PULLERS PRY BARS AND PULLERS PRY BARS AND PULLERS
PRY BARS AND PULLERS PRY BARS AND PULLERS PRY BARS AND PULLERS
PRY BARS AND PULLERS PRY BARS AND PULLERS PRY BARS AND PULLERS
PINCH BARS PINCH BARS PINCH BARS
PINCH BARS PINCH BARS PINCH BARS
PINCH BARS PINCH BARS PINCH BARS
NAIL & TACK PULLERS NAIL & TACK PULLERS NAIL & TACK PULLERS
NAIL & TACK PULLERS NAIL & TACK PULLERS NAIL & TACK PULLERS
NAIL & TACK PULLERS NAIL & TACK PULLERS NAIL & TACK PULLERS
NAIL SETS NAIL SETS NAIL SETS
NAIL SETS NAIL SETS NAIL SETS
NAIL SETS NAIL SETS NAIL SETS
COLD CHISELS COLD CHISELS COLD CHISELS
COLD CHISELS COLD CHISELS COLD CHISELS
COLD CHISELS COLD CHISELS COLD CHISELS
PUNCHES & DRIFTS PUNCHES & DRIFTS PUNCHES & DRIFTS
PUNCHES & DRIFTS PUNCHES & DRIFTS PUNCHES & DRIFTS
PUNCHES & DRIFTS PUNCHES & DRIFTS PUNCHES & DRIFTS
COLD CHISEL/PUNCH SETS COLD CHISEL/PUNCH SETS COLD CHISEL/PUNCH SETS
COLD CHISEL/PUNCH SETS COLD CHISEL/PUNCH SETS COLD CHISEL/PUNCH SETS
COLD CHISEL/PUNCH SETS COLD CHISEL/PUNCH SETS COLD CHISEL/PUNCH SETS
HOLE PUNCHES HOLE PUNCHES HOLE PUNCHES
HOLE PUNCHES HOLE PUNCHES HOLE PUNCHES
HOLE PUNCHES HOLE PUNCHES HOLE PUNCHES
AWLS AND BRAD DRIVERS AWLS AND BRAD DRIVERS AWLS AND BRAD DRIVERS
AWLS AND BRAD DRIVERS AWLS AND BRAD DRIVERS AWLS AND BRAD DRIVERS
AWLS AND BRAD DRIVERS AWLS AND BRAD DRIVERS AWLS AND BRAD DRIVERS
Sort By:
1
Stanley 58-111 Nail Set Stanley 58-112 Square Nail Set Stanley 58-113 Square Nail Set
Ideal for setting nails into materials; long length for setting nails in hard-to-reach areas; fully hardened, precision-milled steel for long life; long, beveled tip for easy nail head alignment; square head prevents rolling when set down. Ideal for setting nails into materials; long length for setting nails in hard-to-reach areas; fully hardened, precision-milled steel for long life; long, beveled tip for easy nail head alignment; square head prevents rolling when set down. Ideal for setting nails into materials; long length for setting nails in hard-to-reach areas; fully hardened, precision-milled steel for long life; long, beveled tip for easy nail head alignment; square head prevents rolling when set down.
Mintcraft JL-CSL0143L  Center Punches Stanley 58-912 Square Nail Set Stanley 58-911 Square Nail Set
Made from drop forged, heat treated chrome alloy steel material with baked enamel finish and heavy duty hex shank. Made of fully hardened, precision-milled steel with long, beveled tip for easy nail head alignment, grip is slip-resistant and ribbed to absorb shock, improving precision. Long length enables user to set nails in hard-to-reach areas. Made of fully hardened, precision-milled steel with long, beveled tip for easy nail head alignment, grip is slip-resistant and ribbed to absorb shock, improving precision. Long length enables user to set nails in hard-to-reach areas.
Mintcraft JL-CSL016  Center Punches Stanley 58-913 Square Nail Set Dasco 530-0 Center Punch
Made from drop forged, heat treated chrome alloy steel material with baked enamel finish and heavy duty hex shank. Made of fully hardened, precision-milled steel with long, beveled tip for easy nail head alignment, grip is slip-resistant and ribbed to absorb shock, improving precision. Long length enables user to set nails in hard-to-reach areas. Made of heat treated high carbon American steel. Features precision ground point for marking accurate hole starting easier. Use on metals softer than their point.
Dasco 539-0 Prick Punch Mintcraft JL-CSL0173L  Center Punches Dasco 540-0 Prick Punch
Made of heat treated high carbon tough American steel that's polished and tapered. Used for marking scribe work pieces and layout work, these sharp polished points aid in accuracy. Use on metals softer than their points. Made from drop forged, heat treated chrome alloy steel material with baked enamel finish and heavy duty hex shank. Made of heat treated high carbon tough American steel that's polished and tapered. Used for marking scribe work pieces and layout work, these sharp polished points aid in accuracy. Use on metals softer than their points.
Dasco 402-0 Cold Chisel Dasco 531-0 Center Punch Toolbasix JLO-0323L  Tack Pullers
Made from heat treated, high carbon American steel with a target head that reduces spalling and mushrooming. Used for cutting, shaping and removing metal softer than the cutting edge such as cast iron, wrought iron, steel, bronze and copper. Made of heat treated high carbon American steel. Features precision ground point for marking accurate hole starting easier. Use on metals softer than their point. Made of heat treated carbon steel blade with a square plastic handle.
Mintcraft JL-CSL003  Cold Chisels Dasco 592-0 Pin Punch Dasco 541-0 Prick Punch
Made from chrome alloy steel material that is drop forged and heat treated. Baked enamel finish Heavy duty, hex shank. Machined to exacting standards from heat treated, high carbon American steel. Has a wide variety of uses in driving and removing such things as pins and keys; after initial removal by a machine punch or starter. Use a pin punch one size smaller than the pin being driven to prevent damage to the side walls containing the pin. Made of heat treated high carbon tough American steel that's polished and tapered. Used for marking scribe work pieces and layout work, these sharp polished points aid in accuracy. Use on metals softer than their points.
Dasco 400-0 Cold Chisel Dasco 401-0 Cold Chisel Dasco 405-0 Cold Chisel
Made from heat treated, high carbon American steel with a target head that reduces spalling and mushrooming. Used for cutting, shaping and removing metal softer than the cutting edge such as cast iron, wrought iron, steel, bronze and copper. Made from heat treated, high carbon American steel with a target head that reduces spalling and mushrooming. Used for cutting, shaping and removing metal softer than the cutting edge such as cast iron, wrought iron, steel, bronze and copper. Made from heat treated, high carbon American steel with a target head that reduces spalling and mushrooming. Used for cutting, shaping and removing metal softer than the cutting edge such as cast iron, wrought iron, steel, bronze and copper.
Stanley 16-286 Cold Chisel Wonder Bar II 55-045 Flat Pry Bar Dasco 581-0 Pin Punch
Used to cut  or shape wrought iron, cast Iron, steel, brass, bronze, copper, aluminum, nuts and rivets. Made with tempered steel and heat treated for increased durability. Able to withstand a bending momentum of 310 in-lbs with a high-visibility. Powder coated finish. Machined to exacting standards from heat treated, high carbon American steel. Has a wide variety of uses in driving and removing such things as pins and keys; after initial removal by a machine punch or starter. Use a pin punch one size smaller than the pin being driven to prevent damage to the side walls containing the pin.
Dasco 582-0 Pin Punch Toolbasix JLO-0243L  Scratch Awls Dasco 532-0 Center Punch
Machined to exacting standards from heat treated, high carbon American steel. Has a wide variety of uses in driving and removing such things as pins and keys; after initial removal by a machine punch or starter. Use a pin punch one size smaller than the pin being driven to prevent damage to the side walls containing the pin. Hardened and tempered steel blade with high impact plastic handle. Can be used to start holes in soft wood and scribe or mark wood or other soft metals. Made of heat treated high carbon American steel. Features precision ground point for marking accurate hole starting easier. Use on metals softer than their point.
Stanley 16-287 Cold Chisel Mintcraft JL-CSL0043L  Cold Chisels Dasco 583-0 Pin Punch
Used to cut  or shape wrought iron, cast Iron, steel, brass, bronze, copper, aluminum, nuts and rivets. Made from chrome alloy steel material that is drop forged and heat treated. Baked enamel finish Heavy duty, hex shank. Machined to exacting standards from heat treated, high carbon American steel. Has a wide variety of uses in driving and removing such things as pins and keys; after initial removal by a machine punch or starter. Use a pin punch one size smaller than the pin being driven to prevent damage to the side walls containing the pin.
Dasco 584-0 Pin Punch Stanley 16-288 Cold Chisel General Tools 806 Jiffy Self-Center Punch
Machined to exacting standards from heat treated, high carbon American steel. Has a wide variety of uses in driving and removing such things as pins and keys; after initial removal by a machine punch or starter. Use a pin punch one size smaller than the pin being driven to prevent damage to the side walls containing the pin. Used to cut  or shape wrought iron, cast Iron, steel, brass, bronze, copper, aluminum, nuts and rivets. Hardened steel pin, knurled body provides no slip grip, auto centering, and countersunk end. Used for creating starter screw holes.
Vaughan & Bushnell 222 Double Ended Mini Pry Bar Dasco 406-0 Cold Chisel Mintcraft JL-CSL005  Cold Chisels
High quality tempered steel. Rust-resistant powder coat finish. Rocker head provides additional leverage. Beveled nail slots. Made from heat treated, high carbon American steel with a target head that reduces spalling and mushrooming. Used for cutting, shaping and removing metal softer than the cutting edge such as cast iron, wrought iron, steel, bronze and copper. Made from chrome alloy steel material that is drop forged and heat treated. Baked enamel finish Heavy duty, hex shank.
Dasco 588-0 Pin Punch Dasco 534-0 Center Punch Dasco 589-0 Pin Punch
Machined to exacting standards from heat treated, high carbon American steel. Has a wide variety of uses in driving and removing such things as pins and keys; after initial removal by a machine punch or starter. Use a pin punch one size smaller than the pin being driven to prevent damage to the side walls containing the pin. Made of heat treated high carbon American steel. Features precision ground point for marking accurate hole starting easier. Use on metals softer than their point. Machined to exacting standards from heat treated, high carbon American steel. Has a wide variety of uses in driving and removing such things as pins and keys; after initial removal by a machine punch or starter. Use a pin punch one size smaller than the pin being driven to prevent damage to the side walls containing the pin.
Stanley 58-230 Square Head Nail Set Dasco 590-0 Pin Punch NAIL PUNCH SET 4PC
NAIL PUNCH SET 4PC
Our Price: $5.85
Made of hardened and tempered alloy steel with square head, round knurled body; tips are cupped and chamfered. Square head prevents rolling; 4" inches long. Set contains (1) each: 1/32", 1/16", and 3/32". Machined to exacting standards from heat treated, high carbon American steel. Has a wide variety of uses in driving and removing such things as pins and keys; after initial removal by a machine punch or starter. Use a pin punch one size smaller than the pin being driven to prevent damage to the side walls containing the pin.
Stanley 16-289 Cold Chisel Dasco 408-0 Cold Chisel Stanley 69-122 Scratch Awl
Used to cut  or shape wrought iron, cast Iron, steel, brass, bronze, copper, aluminum, nuts and rivets. Made from heat treated, high carbon American steel with a target head that reduces spalling and mushrooming. Used for cutting, shaping and removing metal softer than the cutting edge such as cast iron, wrought iron, steel, bronze and copper. Heat treated and plated alloy steel blades hold up to repeated use and are corrosion resistance. Chrome plated steel ferrule for added strength. Bright, smooth finish on bar. Machined hardwood handle. Bar diameter 3/16";  length 3-3/8".
Mintcraft JLO-0093L  Pry Bars Dasco 253-0 Roll Pin Punch Dasco 564-0 Solid Punch
Made of dropped forged and heat treated steel with hexagon steel construction for enhanced strength. Single claw tool. Made of heat treated high carbon American steel. Machined specifically for removing spring or roll pins; made with a hardened point, long shaft. Made from heat treated high carbon American steel. Designed for installing pins, keys, rivets and for starting their removal.
Dasco 565-0 Solid Punch Dasco 566-0 Solid Punch Dasco 431-0 Scratch Awl
Made from heat treated high carbon American steel. Designed for installing pins, keys, rivets and for starting their removal. Made from heat treated high carbon American steel. Designed for installing pins, keys, rivets and for starting their removal. One piece forged all American steel design tool features heat treated point for long life. Designed to start holes in soft wood and scribe or mark wood and other soft materials such as cardboard.
Great Neck Saw BD1 Magnetic Brad Nail Driver Dasco 568-0 Solid Punch Dasco 337-0 Utility Chisel
Magnetic brad and nail driver with solid wood handle and spring action shaft. Drives finishing nails up to 1-1 /2" long without marring surface. Downward pressure on handle inserts nail. Made from heat treated high carbon American steel. Designed for installing pins, keys, rivets and for starting their removal. Made from forged high grade American steel and heat treated to meet or exceed ANSI specifications. Larger "Targethead" striking area reduces mushrooming from repeated blows. Can be used for all around masonry for cutting, trimming and wedging.
Dasco 255-0 Roll Pin Punch Dasco 441-0 Long Cold Chisel Stanley 16-290 Cold Chisel
Made of heat treated high carbon American steel. Machined specifically for removing spring or roll pins; made with a hardened point, long shaft. Made from heat treated, high carbon American steel with a "Targethead" that reduces spalling and mushrooming, extra length for easy access.  Used for cutting, shaping and removing metal softer than the cutting edge such as cast iron, wrought iron, steel, bronze and copper. Used to cut  or shape wrought iron, cast Iron, steel, brass, bronze, copper, aluminum, nuts and rivets.
Hyde Tools 45600 Pry Bar/Scrapers 20 16 Crescent FB7 Flat Pry Bar Vulcan 32941 Wrecking Bars
Use to remove molding, open boxes, scrape paint and pull nails. High-carbon steel hardened and tempered, curved ground scraping end with nail slot. Fits easily into tool boxes or pouches. Surfaces ground for precision nail pulling and prying resulting in less material damage, high visibility, durable finish helps prevent loss and makes it easy to find the tool on the job-site; nail slot provides access for improved functionality and nail pulling; precision tips for fast access and reduced damage to salvaged materials; radius design increases durability, strength and better prying leverage; striking pad assists users with penetration and prying. Bar is drop forged and heated for superior strength during prying, digging and tamping with hexagon steel construction for enhanced strength. Gooseneck pattern.
Vaughan & Bushnell BT90 90 deg Double Ended Pry Bar Dasco 258-0 Roll Pin Punch Dasco 413-0 Cold Chisel
Made from forged spring tempered steel with a 90 degree blade. Used for prying, pull nails, molding, and scraping. Made of heat treated high carbon American steel. Machined specifically for removing spring or roll pins; made with a hardened point, long shaft. Made from heat treated, high carbon American steel with a target head that reduces spalling and mushrooming. Used for cutting, shaping and removing metal softer than the cutting edge such as cast iron, wrought iron, steel, bronze and copper.
Stanley 55-818 Ripping Chisel PRY BAR DBL END NAIL PLLR 11IN Wonder Bar 55-515 Flat Pry Bar
Extra wide claw. Beveled nail slot. Made from drop forged and heat treated steel with hexagon steel construction for strength. Use for precision nail pulling and prying. Made from forged, heat treated, high-carbon steel with polished and beveled cutting edges. Contoured bar makes pulling nails, prying, lifting and scraping easier. Beveled nail slot at both ends. High visibility, powder coated finish.
Dasco 417-0 Cold Chisel Stanley 16-291 Cold Chisel Estwing HC-10 Single Ended Handy Claw
Made from heat treated, high carbon American steel with a target head that reduces spalling and mushrooming. Used for cutting, shaping and removing metal softer than the cutting edge such as cast iron, wrought iron, steel, bronze and copper. Used to cut  or shape wrought iron, cast Iron, steel, brass, bronze, copper, aluminum, nuts and rivets. Made from drop forged hard steel with a vinyl grip. Removes imbedded nails.
Dasco 606-0 Drift Punch Dasco 410-0 Long Cold Chisel Dasco 415-0 Long Cold Chisel
Made of heat treated high carbon American steel. Features a long, tapered point to aid in aligning and sizing holes in metal and various materials. Strong points and "Targethead" render long service. Made from heat treated, high carbon American steel with a "Targethead" that reduces spalling and mushrooming, extra length for easy access.  Used for cutting, shaping and removing metal softer than the cutting edge such as cast iron, wrought iron, steel, bronze and copper. Made from heat treated, high carbon American steel with a "Targethead" that reduces spalling and mushrooming, extra length for easy access.  Used for cutting, shaping and removing metal softer than the cutting edge such as cast iron, wrought iron, steel, bronze and copper.
Dasco 91 Pry Bar Kit With Nail Puller Crescent FB13 Flat Pry Bar Mintcraft JL-CSL008  Cold Chisels
Ideal for pulling trim, molding, baseboards, nails, scraping and cleaning flat surfaces; straight and curved blades with nail pullers; made from high carbon U.S.A. steel with full penetration heat treated for superior strength; kit includes (1) of each: 9" pry/trim/scraper bar, 5-1/2" Lil pry bar and 7-1/2" Ultra pry bar. Surfaces ground for precision nail pulling and prying resulting in less material damage, high visibility, durable finish helps prevent loss and makes it easy to find the tool on the job-site; nail slot provides access for improved functionality and nail pulling; precision tips for fast access and reduced damage to salvaged materials; radius design increases durability, strength and better prying leverage; striking pad assists users with penetration and prying. Made from chrome alloy steel material that is drop forged and heat treated. Baked enamel finish Heavy duty, hex shank.
Dasco 419-0 Long Cold Chisel FatMax 55-101 Wrecking Bar Dasco 603-0 Drift Punch
Made from heat treated, high carbon American steel with a "Targethead" that reduces spalling and mushrooming, extra length for easy access.  Used for cutting, shaping and removing metal softer than the cutting edge such as cast iron, wrought iron, steel, bronze and copper. Made of forged, high-carbon steel able to withstand 975 ft-lbs. of bending momentum; with a slotted claw, beveled ends and high-visibility, powder-coated finish. Made of heat treated high carbon American steel. Features a long, tapered point to aid in aligning and sizing holes in metal and various materials. Strong points and "Targethead" render long service.
General Tools 72 Revolving Punch Plier Estwing HB-15 Double Ended Stanley 55-033 Single Ended Nail Claw
Spring tensioned, self opening tool made of plated steel with cushioned vinyl grip with revolving turret that has six hardened steel punches: 5/64", 3/32", 7/64", 1/8", 5/32", and 3/16"; used to make tiny holes in leather, plastic, rubber, canvas, and other lightweight materials. Bar is forged half round, for added strength and less weight with wide, thin blade for easy prying. Heat treated for durability with a special extracting claw and a beveled nail slot.
Dasco 132 Double Ended Nail Claw Bar Dasco 231 Straight Ripping Bar Stanley 16-298 Cold Chisel Set
Forged of heat treated, high carbon American steel with a 90 degree claw and a bevel sharpened ripping blade; features a variety of nail pulling slots, Sharp V bite in the nail shank for easy nail removal. Blue enamel finish. Bar is made of hand forged  hard, USA steel with a wide, heat treated cutting blade. Made of one piece forged chrome vanadium steel. Hardened, quenched and tempered for long life and safety. Powder coat finish for increased visibility. Set contains (1) each:  3/8", 1/2" & 5/8".
Crescent MB8 Pry Bar DeWalt DWHT58503 4-In-1 Vaughan & Bushnell NP12G Single Ended Nail Puller With Grip
Surfaces ground for precision nail pulling and prying resulting in less material damage, high visibility, durable finish helps prevent loss and makes it easy to find the tool on the job-site; nail slot provides access for improved functionality and nail pulling; precision tips for fast access and reduced damage to salvaged materials; radius design increases durability, strength and better prying leverage; striking pad assists users with penetration and prying. Interchangeable tip for convenience; hexagonal head prevents rolling and can be used as a standard drill chuck ? nail set doubles as drill extension; knurled locking collar for easy nail release and reversal; accepts standard screwdriver bits for versatility; long, beveled tip for easy nail head alignment; fully hardened, precision-milled steel for long life. Set includes: (1) each: 1/32?, 2/32?, 3/32? and #2 point Phillips. Made of high carbon steel to extract deeply embedded nails with claws that are hardened and tempered and a cushion grip handle. Blue, rust resistant finish.
Vulcan 32942 Wrecking Bars Stanley 55-113 Double Ended Precision Claw Bar Stanley 55-116 Double Ended
Bar is drop forged and heated for superior strength during prying, digging and tamping with hexagon steel construction for enhanced strength. Gooseneck pattern. Made from tempered, forged, high-carbon alloy steel with a flat striking face and polished, beveled claws for nail pulling and prying. Made from tempered, forged high-carbon alloy steel. Flat surface allows users to pry molding and trim reducing material damage, polished, beveled claws for nail pulling and prying.
Dasco 134-0 Double Ended Nail Claw Bar FatMax 16-332 Handguarded Cold Chisel General Tools 70079 Utility Center Punch
Forged of high carbon heat treated American steel with 30 degree angled end for fast starting, positive grip and a 90 degree end for close leverage; features a variety of nail pulling slots, Sharp V slots bite in the nail shank for easy nail removal. Blue rust resistance finish. Made with offset blade and shorter bite for increased leverage; bi-material hand guard; used for cutting and shaping wrought iron, cast iron, steel, brass, bronze, copper, aluminum, bolts, nuts and rivets. Lightweight aluminum body with alloy steel internal components that provides accurate center punches to prevent drill bits from traveling, one handed operation, no hammer needed.
Dasco 232 90 deg Ripping Bar 17" OFFSET RIPPING CHISEL     Vaughan & Bushnell BC8 Bear Claw Double Ended Bear Claw Nail Puller
Forged of high carbon heat treated American steel with a 90 degree ripping claw that fits in close quarters, a polished thin blade for ripping and 3 nail pullers; features a wide range of prying, ripping and nail pulling. Drop forged heat treated steel construction. Offset, hexagon steel with large capacity extracting claws and combination puller. Used for industrial demolition, ripping out nails, walls, studs and framework. Stock size 2-1/4",  black oxide finish resists rust and corrosion. Made of forged, tempered steel with flat claws that slip easily under nail heads and a rocker head that provides leverage. Black, rust-resistant finish.
Dasco 22 Pin Punch Kit BAR PRY LIGHT DUTY 3PC        Dasco 44 Cold Chisel Kit
BAR PRY LIGHT DUTY 3PC
Our Price: $13.54
Made of heat treated, high carbon American steel. Used for driving and removing pins and keys. Includes (1) each Nos: 562 3/32" x 5-1/2" Starter Punch, 582 1/8" x 5-1/2" Pin Punch, 583 5/32" x 5/1/2" Pin Punch, 584 3/16" x 5-1/2" Pin Punch, 589 1/4" x 6" Pin Punch and 592 1/16" x 4/12" Pin Punch. Three sizes of bars for versatility and multiple applications. Stamped one-piece steel construction for strength & durability. Tear-drop nail pullers for easy nail removal. Lightweight design for easy carrying in tool belt or box. High visibility power-coated finish for easy carrying in tool belt or box. Heat treated, high carbon American steel. "Targethead" design increases striking area reduces spalling and mushrooming. One Each Nos.: 401 5/16" x  5-1/4" Cold chisel, No. 406 5/8" x  6-3/4" Cold chisel and No. 408 3/4" x 7-1/8" Cold chisel; to be used on cast iron, wrought iron, steel, bronze and copper.
Vulcan 32943 Wrecking Bars Stanley 16-226 Pin Punch Set Stanley 55-117 Double Ended
Bar is drop forged and heated for superior strength during prying, digging and tamping with hexagon steel construction for enhanced strength. Gooseneck pattern. Made from one piece forged chrome vanadium steel that is hardened, quenched and tempered for long life. Powder coat finish for increased visibility. 6" long. Includes (1) each: 1/16", 1/8", 5/32", 3/16", 1/4" & 5/16" points. Made from tempered, forged high-carbon alloy steel. Flat surface allows users to pry molding and trim reducing material damage, polished, beveled claws for nail pulling and prying.
Stanley 55-114 Double Ended Precision Claw Bar PUNCH REVOLVING HEAVY DUTY    DeWalt DWHT55518 Double Ended Flat Pry Bar
Made from tempered, forged, high-carbon alloy steel with a flat striking face and polished, beveled claws for nail pulling and prying. For punching round holes in leather, plastic, rubber, canvas, cardboard and similar materials; special compound joint design requires less effort than other punch pliers; spring tension, self-opening revolving punch; six tapered, hollow, hardened steel, non-clogging punches; plastic grips for comfort and control. Punch sizes: 5/64", 3/32", 7/64", 1/8", 5/32" and 3/16". Spring steel for strength and durability; extra wide prying end for leverage and pry surface; pointed beveled end for penetration and nail pulling; multiple nail pullers for flexibility and nail removal.
Superbar B215 Double Ended Pry Bar Crescent FB15 Flat Pry Bar Vaughan & Bushnell MLB Molding Lifter Bar
Made from forged spring tempered steel for heavy duty use with three beveled nail slots; polished, sharp blades for easy insertion. Used for prying molding, scraping and pulling nails. Blue coated finish. Surfaces ground for precision nail pulling and prying resulting in less material damage, high visibility, durable finish helps prevent loss and makes it easy to find the tool on the job-site; nail slot provides access for improved functionality and nail pulling; precision tips for fast access and reduced damage to salvaged materials; radius design increases durability, strength and better prying leverage; striking pad assists users with penetration and prying. Made from forged, tempered steel, with wide, sharp blades that slip easily under molding and baseboard; curved ends for leverage. Chrome plated finish.
Wonder Bar X21 55-526 Flat Pry Bar Super Wonder Bar 55-525 Contoured Pry Bar Vaughan & Bushnell BC9 Bear Claw Double Ended Bear Claw Nail Puller
Made from forged, high-carbon steel, long reach for greater leverage in nail pulling, lifting or prying. High visibility, powder coated finish. Made from forged, heat treated, high-carbon steel  with polished, beveled cutting edges. Arched center gives more swing during nail pulling; tight radius on bend angle aids in positioning bar. Extended tongue improves grip and reach, can be used as a foot levered, hands free panel lift. High visibility, powder coated finish. Made of forged, tempered steel with flat claws that slip easily under nail heads and a rocker head that provides leverage. Black, rust-resistant finish.
General Tools 87 Center Punch FatMax 55-102 Wrecking Bar DeWalt DWHT55129 Double Ended Wrecking Bar
Provides accurate center punches without drill bit traveling, one handed operation, no hammer needed; spring tension impact adjustments for working with lighter materials, replaceable hardened steel point, and black oxide finish preventing rust. Made of forged, high-carbon steel able to withstand 975 ft-lbs. of bending momentum; with a slotted claw, beveled ends and high-visibility, powder-coated finish. Rounded 90 degree prying end for leverage and prying; tri-lobe design for comfort and strength; multiple nail pullers for flexibility and nail removal; pointed beveled ends for penetration and nail pulling.
Vaughan & Bushnell BC10 Bear Claw Double Ended Bear Claw Nail Puller Crescent MB10 Pry Bar Stanley 55-035 Double Ended Nail Puller
Made of forged, tempered steel with flat claws that slip easily under nail heads and a rocker head that provides leverage. Black, rust-resistant finish. Surfaces ground for precision nail pulling and prying resulting in less material damage, high visibility, durable finish helps prevent loss and makes it easy to find the tool on the job-site; nail slot provides access for improved functionality and nail pulling; precision tips for fast access and reduced damage to salvaged materials; radius design increases durability, strength and better prying leverage; striking pad assists users with penetration and prying. Heat treated for durability with a double end, 90 degree and 30 degree, puller and  fully sharpened claw tips.
BAR MOLDING 10IN              Vaughan & Bushnell NP12DE Double Ended Nail Puller BAR CLAW W/DIMPLER 10IN
BAR MOLDING 10IN
Our Price: $16.59
BAR CLAW W/DIMPLER 10IN
Our Price: $16.75
This molding bar is designed to pull and pry nails or to safety remove molding and trim. For removing difficult nails the flat striking face allows the claw to be driven under the nail. Shaft is constructed in an I-beam design for durability and light weight. Made of high carbon steel to extract deeply embedded nails with claws that are hardened and tempered. Blue, rust resistant finish. Nail digger exposes the head of a flush nail so it can be pulled with minimal damage to the wood. I-beam shaft provides strength without adding weight. Extra wide strike surface helps user accurately strike the bar to get under a nail or behind material to pry. Pointed penetration end digs into material to remove embedded nails.
Vulcan 32944 Wrecking Bars Superbar B215L Double Ended Pry Bar DeWalt DWHT55528 Double Ended
Bar is drop forged and heated for superior strength during prying, digging and tamping with hexagon steel construction for enhanced strength. Gooseneck pattern. Made from forged spring tempered steel for heavy duty use with three beveled nail slots; polished, sharp blades for easy insertion. Used for prying molding, scraping and pulling nails. Blue coated finish. Spring steel for strength and durability; extra wide prying end for leverage and pry surface; pointed beveled end for penetration and nail pulling; multiple nail pullers for flexibility and nail removal.
Crescent MB12 Flat Pry Bar Stanley 55-115 Double Ended Precision Claw Bar General Tools 77 Center Punch
Surfaces ground for precision nail pulling and prying resulting in less material damage, high visibility, durable finish helps prevent loss and makes it easy to find the tool on the job-site; nail slot provides access for improved functionality and nail pulling; precision tips for fast access and reduced damage to salvaged materials; radius design increases durability, strength and better prying leverage; striking pad assists users with penetration and prying. Made from tempered, forged, high-carbon alloy steel with a flat striking face and polished, beveled claws for nail pulling and prying. Lightweight aluminum body with alloy steel internal components, provides accurate center punches without drill bit traveling, one handed operation, no hammer needed, spring tension impact adjustments for working with lighter materials.
DeWalt DWHT55131 Double Ended Wrecking Bar Dasco 30 Punch and Chisel Kit Vaughan & Bushnell BC12 Bear Claw Double Ended Bear Claw Nail Puller
Rounded 90 degree prying end for leverage and prying; tri-lobe design for comfort and strength; multiple nail pullers for flexibility and nail removal; pointed beveled ends for penetration and nail pulling. Made of heat treated, high carbon American steel. Set contain (1) each:  Nos.: 402 3/8" x 5-5/8" Cold chisel, 406 5/8" x 6-3/4" Cold chisel, 532 7/16" x 5" Center Punch, 562 5-1/2" Long Starter Punch and 582 1/8" x 5-1/2" Pin Punch. Made of forged, tempered steel with flat claws that slip easily under nail heads and a rocker head that provides leverage. Black, rust-resistant finish.
FatMax 55-104 Wrecking Bar DeWalt DWHT55132 Double Ended Wrecking Bar 42 in L Estwing PB-18 Lightweight Pry Bar 18 in L
Made of forged, high-carbon steel able to withstand 975 ft-lbs. of bending momentum; with a slotted claw, beveled ends and high-visibility, powder-coated finish. Rounded 90 degree prying end for leverage and prying; tri-lobe design for comfort and strength; multiple nail pullers for flexibility and nail removal; pointed beveled ends for penetration and nail pulling. Made from tempered, forged steel; one piece I-Beam construction for strength, lightweight with a rocking head for leverage and a beveled nail slot. Baked enamel finish.
FatMax 55-119 Functional Utility Bar Vaughan & Bushnell BC14 Double Ended Bear Claw Nail Puller General Tools 79 Center Punch
One piece forged steel bar that serves as a 4-in-1 tool for prying, splitting, board bending and striking jobs. Made of tempered steel with a textured grip weighs 2.5 lbs. Made of forged, tempered steel with flat claws that slip easily under nail heads and a rocker head that provides leverage. Black, rust-resistant finish. Provides accurate center punches to prevent drill bits from traveling, handles heavy-duty metals, yet not overbearing when working with wood or thin-walled tubing. One-handed operation, no hammer needed. Spring tension impact adjustments for working with lighter materials. Black oxide finish to prevent rust. Used for punching, marking and staking and hardened steel point is replaceable.
BAR WRECK 8LB 42IN LGTH       Dasco 11 Roll Pin Punch Kit Crescent DB18X Flat Indexing Pry Bar
Bar is drop forged and heated for superior strength during prying, digging and tamping with hexagon steel construction for enhanced strength. Gooseneck pattern. Made of heat treated high carbon American steel. Used for driving and removing pins, keys, etc.; machined from high carbon steel; set contains (1) of each: 1/8", 5/32", 3/16", 7/32", 1/4" and 5/16". Head indexes over 180 degrees and locks into 16 positions for increased access 90 degree flat head offers better access and wider support for prying against surfaces; striking pas assists users with penetration and prying.
Dasco 88 Punch and Chisel Kit Crescent DB16 Adjustable Multi-Functional Pry Bar With Nail Pull Crescent DB30X Flat Indexing Pry Bar
Contains 5/16", 5/8", 3/4" cold chisels; 1/16", 1/8", 5/32", 3/16", 1/4", 5/16" pin punch; 1/4" center punch; 3/8" prick punch and 7" scratch awl; scratch awl is ideal for starting screw holes; cold chisels are used for cutting and shaping metal that is softer than the cutting edge; pin punches are used to remove a pin or key; center punches are used for making accurate hole starting easier and prick punches are used to mark and scribe work pieces. Made of high carbon heat treated American steel. Multi-functional utility bar for both demolition and renovation projects; adjustable jaws for straightening, pulling and prying, crow bar end, nail extractor and striking head; extendable jaws quickly allows you to pull, pry or straighten any board up to 5.5" or increase the access and force of the nail extractor. Head indexes over 180 degrees and locks into 16 positions for increased access 90 degree flat head offers better access and wider support for prying against surfaces; striking pas assists users with penetration and prying.
BAR DEMOLITION 4-IN-1 18IN    BAR PRY MULTI-FUNCTION 40IN   Vulcan 32939 Pinch Point Bars
Made from one piece forged steel bar for increased durability with two tiered jaws for grabbing common dimensional lumber and decking. Beveled nail slot for pulling and prying nails. Textured grip. Renovators, contractors and deck builders will all benefit from the lightweight, durable, multifunctional utility bar. The increased functionality leads to less tools on the jobsite. This bar features a 2x4 grabber, striking surface, 7/8 in. tri-lobe stock and an extra wide pry end with precision ground edges. Drop forged and heat treated for added strength during prying, digging and tamping.
Vulcan 32946 Wrecking Bars Crescent DB24 Adjustable Multi-Functional Pry Bar With Nail Pull Vulcan 32937 San Angelo Bars
Bar is drop forged and heated for superior strength during prying, digging and tamping with hexagon steel construction for enhanced strength. Gooseneck pattern. Multi-functional utility bar for both demolition and renovation projects; adjustable jaws for straightening, pulling and prying, crow bar end, nail extractor and striking head; extendable jaws quickly allows you to pull, pry or straighten any board up to 5.5" or increase the access and force of the nail extractor. Drop forged and heat treated for superior strength during prying, digging and tamping. Hexagon steel construction for enhanced strength, one inch blade width.
Stanley 93-310 Board Bender Deck Tool Fulton TW30WB Double Ended Wrecker Bar Vulcan 32940 Pinch Point Bars
Made of extra heavy duty carbon steel with 5/8" high-carbon steel bar. Use the hook on joists and push handle down to squeeze boards tight, or use to straighten decking or joists. The cushioned handle is designed for kneeling to maintain pressure; frees both hands for nailing. Made of heavy duty hex stock, bar has a push/pull action. Black with polished and clear coated head and chisel. Drop forged and heat treated for added strength during prying, digging and tamping.
Vulcan 32938 Wedge Point Bars Fulton TW36WB Double Ended Wrecker Bar Vaughan & Bushnell 222CS Double Ended Mini Pry Bar
Drop forged and heat treated for superior strength during prying and tamping. Made of heavy duty hex stock, bar has a push/pull action. Black with polished and clear coated head and chisel. High quality tempered steel. Rust-resistant powder coat finish. Rocker head provides additional leverage. Beveled nail slots.
Crescent 56 Nail Puller Fulton TW48WB Rocker Head Wrecker Bar NAIL PULLER 12IN W/DIMPLER
Made from a forged alloy, hardened and tempered jaw, box-joint and 24 inch full extension. Black enamel finish. Conforms to U.S. Fed. Spec. GGG-P-79lb, Type 1, Class-1. A high performance tool for serious do-it-yourselfers, contractors and professionals; unique rocker head for noise power without blocking; wrecks fencing with greater leverage; pry's flooring by pushing and pulling with equal force; double claw for shingles. 8.5 oz solid Titanium bar with open truss design; patented nail removal feature makes a round impression around the nail head to allow the claws to easily slip under the nail head, thereby reducing damage to your material; strike plate outlasts steel bars 3X longer - doesn't spall, crack and mushroom like steel bars; very strong and comfortable trussed bar design.
BAR UTILITY 30 INCH LGTH
Multi-purpose demolition tool made of one piece forged steel with a sledge hammer face, ripping hook and a textured grip. Weighs 8.5 lbs.
   
 
1