Home > PLUMBING > ROUGH PLUMBING SUPPLIES > PIPE FITTINGS > PUSH FIT FITTINGS
Choose a sub category:
TOWEL BARS TOWEL RINGS TISSUE HOLDERS
TOOTHBRUSH / TUMBLER HOLDERS SOAP DISHES GARMENT HOOKS
BATH SETS BATH SAFETY MISC BATH HARDWARE
SHOWER RODS & HOLDERS SHOWER CURTAINS & ACCESSORIES
Sort By:
1
Pro Bite 636-003HC/PB711R Push Fit Demount Clip Pro Bite 636-004HC/PB721R Push Fit Demount Clip B&K 510-903HC Lock Nut
Removal tool. Removal tool. Meets the following specifications: Material: ANSI/ASTM A-197, Dimensions: ANSI/ASME B.16.3, Threads: ANSI B1.20.1.
Cash Acme U712A Disconnect Clip Cash Acme U710A Disconnect Clip Cash Acme U714A Disconnect Clip
For quick and easy disassembly of the SharkBite Push-Fit Fittings. For quick and easy disassembly of the SharkBite Push-Fit Fittings. For quick and easy disassembly of the SharkBite Push-Fit Fittings.
Cash Acme U708A Disconnect Clip Cash Acme U706A Disconnect Clip CLIP DISCONNECT W/GAUGE 1/2PVC
For quick and easy disassembly of the SharkBite Push-Fit Fittings. For quick and easy disassembly of the SharkBite Push-Fit Fittings. The SharkBite PVC IPS (Iron Pipe Size) disconnect clip can be used the release a SharkBite PVC IPS Fitting from Sch. 40, 80, 120 PVC Pipe. The PVC Disconnect Clip will release the fitting on the white collar of the fitting. The PVC Disconnect Clip also serves as a safe seal depth gauge to mark the PVC Pipe to ensure the fitting has been inserted to the proper depth.
CLIP DISCONNECT W/GAUGE 3/4PVC CLIP DISCONNECT W/GAUGE 1 PVC STEM MALE 1/2IN CTS X1/2IN MPT
The SharkBite PVC IPS (Iron Pipe Size) disconnect clip can be used the release a SharkBite PVC IPS Fitting from Sch. 40, 80, 120 PVC Pipe. The PVC Disconnect Clip will release the fitting on the white collar of the fitting. The PVC Disconnect Clip also serves as a safe seal depth gauge to mark the PVC Pipe to ensure the fitting has been inserted to the proper depth. The SharkBite PVC IPS (Iron Pipe Size) disconnect clip can be used the release a SharkBite PVC IPS Fitting from Sch. 40, 80, 120 PVC Pipe. The PVC Disconnect Clip will release the fitting on the white collar of the fitting. The PVC Disconnect Clip also serves as a safe seal depth gauge to mark the PVC Pipe to ensure the fitting has been inserted to the proper depth. Plastic male stem fitting for point of use low pressure applications. It is designed and manufactured for many years of trouble free service. Produced of off-white polypropylene, a high performance thermoplastic material, the design allows for quick and easy connections without the use of installation tools.
Gardner Bender GMC-88M5 Modular Electrical Plug STEM FEMALE 1/2CTS X 1/2FPT   Watts P-670 End Cap
Use with network/twisted pair cable CAT-5E, 8-position, 8-contact, rounded cable, solid wire. Plastic female stem fitting is ASSE 1061 certified for domestic plumbing service. It is designed and manufactured for many years of trouble free service. Produced of off-white Polysulfone, a high performance thermal plastic material, the design allows for quick and easy connections without the use of installation tools. Works with copper, CPVC, Pex, LPDE, MPDE, HDPE and polybutylene tubing in hot and cold water applications. Incorporates stainless steel gripping teeth in the collets, allowing the connectors to interconnect with multiple materials without special tools or tube inserts. Exclusive O-ring guide insures zero-leak connections. Tube orientation can be changed by a simple twist, reducing the amount of tubing required to plumb a water system. Reusable, approved for use behind walls and underground.
Watts P-606 Push Connect Fittings Elkhart CopperLoc Push-Fit Tube Adapter Watts P-412 Push-Fit Tube To Pipe Adapter
Works with copper, CPVC, PEX, LPDE, MPDE, HDPE and polybutylene tubing in hot and cold water applications. Incorporates stainless steel gripping teeth in the collets, allowing the connectors to interconnect with multiple materials without special tools or tube inserts. Exclusive O-ring guide insures zero-leak connections. Tube orientation can be changed by a simple twist, reducing the amount of tubing required to plumb a water system. Reusable, approved for use behind walls and underground. Polybagged Copper and copper alloy push connect fittings provide plumbing system design flexibility by allowing you to join copper, CPVC, or PEX lines with just one fitting. Push fit, tool free, permanent fitting. pre-lubed for quick installation, approved for underground installations. Bagged. Works with copper, CPVC, PEX, LPDE, MPDE, HDPE and polybutylene tubing in hot and cold water applications. Incorporates stainless steel gripping teeth in the collets, allowing the connectors to interconnect with multiple materials without special tools or tube inserts. Exclusive O-ring guide insures zero-leak connections. Tube orientation can be changed by a simple twist, reducing the amount of tubing required to plumb a water system. Reusable, approved for use behind walls and underground. Polybagged.
Watts P-1019 Push Connect Fitting CONNECTOR 1/4OD X 1/4FP       World Wide Sourcing PPG130R-15X10 Galv. Pipe Fitting
Works with copper, CPVC, PEX, LPDE, MPDE, HDPE and polybutylene tubing in hot and cold water applications. Incorporates stainless steel gripping teeth in the collets, allowing the connectors to interconnect with multiple materials without special tools or tube inserts. Exclusive O-ring guide insures zero-leak connections. Tube orientation can be changed by a simple twist, reducing the amount of tubing required to plumb a water system. Reusable, approved for use behind walls and underground. Polybagged Incorporates stainless steel gripping teeth in the collets. These corrosion resistant teeth allow the connectors to interconnect with multiple materials without the need for special tools or tube inserts. It works with copper, CPVC, pex, LPDE, MPDE, HDPE and polybutylene tubing. Flat banded, right hand threads.
Watts P-610 Push-Fit Tube To Pipe Adapter Elkhart CopperLoc Push-Fit Tube Adapter Watts P-806 Push Connect Fittings
Works with copper, CPVC, PEX, LPDE, MPDE, HDPE and polybutylene tubing in hot and cold water applications. Incorporates stainless steel gripping teeth in the collets, allowing the connectors to interconnect with multiple materials without special tools or tube inserts. Exclusive O-ring guide insures zero-leak connections. Tube orientation can be changed by a simple twist, reducing the amount of tubing required to plumb a water system. Reusable, approved for use behind walls and underground. Polybagged. Copper and copper alloy push connect fittings provide plumbing system design flexibility by allowing you to join copper, CPVC, or PEX lines with just one fitting. Push fit, tool free, permanent fitting. pre-lubed for quick installation, approved for underground installations. Works with copper, CPVC, PEX, LPDE, MPDE, HDPE and polybutylene tubing in hot and cold water applications. Incorporates stainless steel gripping teeth in the collets, allowing the connectors to interconnect with multiple materials without special tools or tube inserts. Exclusive O-ring guide insures zero-leak connections. Tube orientation can be changed by a simple twist, reducing the amount of tubing required to plumb a water system. Reusable, approved for use behind walls and underground. Polybagged
Watts P Stackable Tube Elbow World Wide Sourcing PPG130R-20X15X15 Galv Pipe Fitting World Wide Sourcing PPG130R-20X15X20 Galv Pipe Fitting
Works with copper, CPVC, Pex, LPDE, MPDE, HDPE and polybutylene tubing in hot and cold water applications. Incorporates stainless steel gripping teeth in the collets, allowing the connectors to interconnect with multiple materials without special tools or tube inserts. Exclusive O-ring guide insures zero-leak connections. Tube orientation can be changed by a simple twist, reducing the amount of tubing required to plumb a water system. Reusable, approved for use behind walls and underground. Flat banded, right hand threads. Flat banded, right hand threads.
World Wide Sourcing 11A3/4X3/4X1/2G Galvanized Tee CopperLoc 10170885 Tube Cap Watts P Tube Elbow
Flat banded, right hand threads. Copper and copper alloy push connect fitting. Push fit, tool free, permanent fitting. pre-lubed for quick installation, approved for underground installations. Works with copper, CPVC, Pex, LPDE, MPDE, HDPE and polybutylene tubing in hot and cold water applications. Incorporates stainless steel gripping teeth in the collets, allowing the connectors to interconnect with multiple materials without special tools or tube inserts. Exclusive O-ring guide insures zero-leak connections. Tube orientation can be changed by a simple twist, reducing the amount of tubing required to plumb a water system. Reusable, approved for use behind walls and underground. 1/2" CTS x 1/2" NPT.
Watts PL-3006 Push-Fit Tube To Pipe Adapter CopperLoc 900 Non-Removable Push-Fit Tube Coupling With Stop END STOP 1/4IN OD
Plastic quick connect fittings are made from polysulfone, a high performance thermal plastic material. Design allows for quick and easy connections to pipe without installation tool. Use on copper, pex, CPVC and polybutylene pipe. Product meets all National Plumbing Codes. Copper and copper alloy push connect fittings provide plumbing system design flexibility by allowing you to join copper, CPVC, or PEX lines with just one fitting. Push fit, tool free, permanent fitting. pre-lubed for quick installation, approved for underground installations. Bagged. Connects to copper, CPVC, PEX, LPDE, MPDE, HDPE and polybutylene tubing.
CONNECT 1/2CTS X 3/4MGHT      Watts P-613 Push-Fit Tube To Pipe Adapter Watts PL-3024 Push-Fit Tube To Pipe Adapter
Incorporates stainless steel gripping teeth in the collets. These corrosion resistant teeth allow the connectors to interconnect with multiple materials without the need for special tools or tube inserts. It works with copper, CPVC, pex, LPDE, MPDE, HDPE and polybutylene tubing. Works with copper, CPVC, PEX, LPDE, MPDE, HDPE and polybutylene tubing in hot and cold water applications. Incorporates stainless steel gripping teeth in the collets, allowing the connectors to interconnect with multiple materials without special tools or tube inserts. Exclusive O-ring guide insures zero-leak connections. Tube orientation can be changed by a simple twist, reducing the amount of tubing required to plumb a water system. Reusable, approved for use behind walls and underground. Polybagged. Plastic quick connect fittings are made from polysulfone, a high performance thermal plastic material. Design allows for quick and easy connections to pipe without installation tool. Use on copper, pex, CPVC and polybutylene pipe. Product meets all National Plumbing Codes.
Watts P Tube Elbow CopperLoc 907 Non-Removable Tube Elbow CopperLoc 906 Non-Removable Tube Elbow
Works with copper, CPVC, PEX, LPDE, MPDE, HDPE and polybutylene tubing in hot and cold water applications. Incorporates stainless steel gripping teeth in the collets, allowing the connectors to interconnect with multiple materials without special tools or tube inserts. Exclusive O-ring guide insures zero-leak connections. Tube orientation can be changed by a simple twist, reducing the amount of tubing required to plumb a water system. Reusable, approved for use behind walls and underground. Polybagged. Copper and copper alloy push connect fittings provide plumbing system design flexibility by allowing you to join copper, CPVC, or PEX lines with just one fitting. Push fit, tool free, permanent fitting. pre-lubed for quick installation, approved for underground installations. Copper and copper alloy push connect fittings provide plumbing system design flexibility by allowing you to join copper, CPVC, or PEX lines with just one fitting. Push fit, tool free, permanent fitting. pre-lubed for quick installation, approved for underground installations. Bagged.
Watt PL-3015 Coupling Union Watts PL-3005 Push-Fit Tube To Pipe Adapter Watts PL-3004 Push-Fit Tube To Pipe Adapter
Plastic quick connect fittings are made from polysulfone, a high performance thermal plastic material. Design allows for quick and easy connections to pipe without installation tool. Use on copper, pex, CPVC and polybutylene pipe. Product meets all National Plumbing Codes. Plastic quick connect fittings are made from polysulfone, a high performance thermal plastic material. Design allows for quick and easy connections to pipe without installation tool. Use on copper, pex, CPVC and polybutylene pipe. Product meets all National Plumbing Codes. Plastic quick connect fittings are made from polysulfone, a high performance thermal plastic material. Design allows for quick and easy connections to pipe without installation tool. Use on copper, pex, CPVC and polybutylene pipe. Product meets all National Plumbing Codes.
Watts PL Tube Elbow Watts PL Tube Elbow Watts PL-3026 Push-Fit Tube To Pipe Adapter
Plastic quick connect fittings are made from polysulfone, a high performance thermal plastic material. Design allows for quick and easy connections to pipe without installation tool. Use on copper, pex, CPVC and polybutylene pipe. Product meets all National Plumbing Codes. Plastic quick connect fittings are made from polysulfone, a high performance thermal plastic material. Design allows for quick and easy connections to pipe without installation tool. Use on copper, pex, CPVC and polybutylene pipe. Product meets all National Plumbing Codes. Plastic quick connect fittings are made from polysulfone, a high performance thermal plastic material. Design allows for quick and easy connections to pipe without installation tool. Use on copper, pex, CPVC and polybutylene pipe. Product meets all National Plumbing Codes.
Watts PL-3025 Push-Fit Tube To Pipe Adapter Watts P-400 Tube Coupling Gardner Bender GMC-88C6 Modular Electrical Plug
Plastic quick connect fittings are made from polysulfone, a high performance thermal plastic material. Design allows for quick and easy connections to pipe without installation tool. Use on copper, pex, CPVC and polybutylene pipe. Product meets all National Plumbing Codes. Works with copper, CPVC, PEX, LPDE, MPDE, HDPE and polybutylene tubing in hot and cold water applications. Incorporates stainless steel gripping teeth in the collets, allowing the connectors to interconnect with multiple materials without special tools or tube inserts. Exclusive O-ring guide insures zero-leak connections. Tube orientation can be changed by a simple twist, reducing the amount of tubing required to plumb a water system. Reusable, approved for use behind walls and underground. Polybagged. Use with network/twisted pair cable CAT-6, 8-position, 8-contact, rounded cable, solid wire.
Watts P-870 End Cap Watts PL-3027 Push-Fit Tube To Pipe Adapter CONNECTOR 3/8OD X 1/4FP
Works with copper, CPVC, Pex, LPDE, MPDE, HDPE and polybutylene tubing in hot and cold water applications. Incorporates stainless steel gripping teeth in the collets, allowing the connectors to interconnect with multiple materials without special tools or tube inserts. Exclusive O-ring guide insures zero-leak connections. Tube orientation can be changed by a simple twist, reducing the amount of tubing required to plumb a water system. Reusable, approved for use behind walls and underground. Plastic quick connect fittings are made from polysulfone, a high performance thermal plastic material. Design allows for quick and easy connections to pipe without installation tool. Use on copper, pex, CPVC and polybutylene pipe. Product meets all National Plumbing Codes. Incorporates stainless steel gripping teeth in the collets. These corrosion resistant teeth allow the connectors to interconnect with multiple materials without the need for special tools or tube inserts. It works with copper, CPVC, pex, LPDE, MPDE, HDPE and polybutylene tubing.
Watts PL Tube Elbow Watt PL-3000 Quick Connect Coupling Union Watts PL-3007 Push-Fit Tube To Pipe Adapter
Plastic quick connect fittings are made from polysulfone, a high performance thermal plastic material. Design allows for quick and easy connections to pipe without installation tool. Use on copper, pex, CPVC and polybutylene pipe. Product meets all National Plumbing Codes. Plastic quick connect fittings are made from polysulfone, a high performance thermal plastic material. Design allows for quick and easy connections to pipe without installation tool. Use on copper, pex, CPVC and polybutylene pipe. Product meets all National Plumbing Codes. Plastic quick connect fittings are made from polysulfone, a high performance thermal plastic material. Design allows for quick and easy connections to pipe without installation tool. Use on copper, pex, CPVC and polybutylene pipe. Product meets all National Plumbing Codes.
Watts P-602 Tube Reducing Coupling Watts PL Tube Elbow Watts PL Tube Elbow
Works with copper, CPVC, PEX, LPDE, MPDE, HDPE and polybutylene tubing in hot and cold water applications. Incorporates stainless steel gripping teeth in the collets, allowing the connectors to interconnect with multiple materials without special tools or tube inserts. Exclusive O-ring guide insures zero-leak connections. Tube orientation can be changed by a simple twist, reducing the amount of tubing required to plumb a water system. Reusable, approved for use behind walls and underground. Polybagged. Plastic quick connect fittings are made from polysulfone, a high performance thermal plastic material. Design allows for quick and easy connections to pipe without installation tool. Use on copper, pex, CPVC and polybutylene pipe. Product meets all National Plumbing Codes. Plastic quick connect fittings are made from polysulfone, a high performance thermal plastic material. Design allows for quick and easy connections to pipe without installation tool. Use on copper, pex, CPVC and polybutylene pipe. Product meets all National Plumbing Codes.
Pro Bite 633-003HC/LF816R End Cap Watts P-615 Push-Fit Tube To Pipe Adapter CopperLoc 900 Non-Removable Push-Fit Tube Coupling With Stop
Connects to copper, PEX or CPVC, no glue, soldering, crimping or special tools, approved for in-wall and underground burial, approved for potable water, radiant and hydronic heating, easily repositioned or removed. Works with copper, CPVC, Pex, LPDE, MPDE, HDPE and polybutylene tubing in hot and cold water applications. Incorporates stainless steel gripping teeth in the collets, allowing the connectors to interconnect with multiple materials without special tools or tube inserts. Exclusive O-ring guide insures zero-leak connections. Tube orientation can be changed by a simple twist, reducing the amount of tubing required to plumb a water system. Reusable, approved for use behind walls and underground. Copper and copper alloy push connect fittings provide plumbing system design flexibility by allowing you to join copper, CPVC, or PEX lines with just one fitting. Push fit, tool free, permanent fitting. pre-lubed for quick installation, approved for underground installations. Bagged.
Watts P Tube Elbow Elkhart CopperLoc Push-Fit Tube Adapter Elkhart CopperLoc Push-Fit Tube Adapter
Works with copper, CPVC, PEX, LPDE, MPDE, HDPE and polybutylene tubing in hot and cold water applications. Incorporates stainless steel gripping teeth in the collets, allowing the connectors to interconnect with multiple materials without special tools or tube inserts. Exclusive O-ring guide insures zero-leak connections. Tube orientation can be changed by a simple twist, reducing the amount of tubing required to plumb a water system. Reusable, approved for use behind walls and underground. Polybagged. Copper and copper alloy push connect fittings provide plumbing system design flexibility by allowing you to join copper, CPVC, or PEX lines with just one fitting. Push fit, tool free, permanent fitting. pre-lubed for quick installation, approved for underground installations. Copper and copper alloy push connect fittings provide plumbing system design flexibility by allowing you to join copper, CPVC, or PEX lines with just one fitting. Push fit, tool free, permanent fitting. pre-lubed for quick installation, approved for underground installations. Bagged.
CopperLoc 907-4 Non-Removable Tube Elbow Watts PL Tube Elbow Watts PL-3036 Push-Fit Tube To Pipe Adapter
Copper and copper alloy push connect fitting. Push fit, tool free, permanent fitting. pre-lubed for quick installation, approved for underground installations. Plastic quick connect fittings are made from polysulfone, a high performance thermal plastic material. Design allows for quick and easy connections to pipe without installation tool. Use on copper, pex, CPVC and polybutylene pipe. Product meets all National Plumbing Codes. Plastic quick connect fittings are made from polysulfone, a high performance thermal plastic material. Design allows for quick and easy connections to pipe without installation tool. Use on copper, pex, CPVC and polybutylene pipe. Product meets all National Plumbing Codes.
Watts PL-3035 Push-Fit Tube To Pipe Adapter Watt P-600 Quick Connect Coupling Union Watts PL Tube Elbow
Plastic quick connect fittings are made from polysulfone, a high performance thermal plastic material. Design allows for quick and easy connections to pipe without installation tool. Use on copper, pex, CPVC and polybutylene pipe. Product meets all National Plumbing Codes. Works with copper, CPVC, PEX, LPDE, MPDE, HDPE and polybutylene tubing in hot and cold water applications. Incorporates stainless steel gripping teeth in the collets, allowing the connectors to interconnect with multiple materials without special tools or tube inserts. Exclusive O-ring guide insures zero-leak connections. Tube orientation can be changed by a simple twist, reducing the amount of tubing required to plumb a water system. Reusable, approved for use behind walls and underground. Polybagged. Plastic quick connect fittings are made from polysulfone, a high performance thermal plastic material. Design allows for quick and easy connections to pipe without installation tool. Use on copper, pex, CPVC and polybutylene pipe. Product meets all National Plumbing Codes.
Watts P-810 Push-Fit Tube To Pipe Adapter Watts P Tube Elbow Watts P Tube Elbow
Works with copper, CPVC, PEX, LPDE, MPDE, HDPE and polybutylene tubing in hot and cold water applications. Incorporates stainless steel gripping teeth in the collets, allowing the connectors to interconnect with multiple materials without special tools or tube inserts. Exclusive O-ring guide insures zero-leak connections. Tube orientation can be changed by a simple twist, reducing the amount of tubing required to plumb a water system. Reusable, approved for use behind walls and underground. Polybagged. Works with copper, CPVC, PEX, LPDE, MPDE, HDPE and polybutylene tubing in hot and cold water applications. Incorporates stainless steel gripping teeth in the collets, allowing the connectors to interconnect with multiple materials without special tools or tube inserts. Exclusive O-ring guide insures zero-leak connections. Tube orientation can be changed by a simple twist, reducing the amount of tubing required to plumb a water system. Reusable, approved for use behind walls and underground. Polybagged. Works with copper, CPVC, Pex, LPDE, MPDE, HDPE and polybutylene tubing in hot and cold water applications. Incorporates stainless steel gripping teeth in the collets, allowing the connectors to interconnect with multiple materials without special tools or tube inserts. Exclusive O-ring guide insures zero-leak connections. Tube orientation can be changed by a simple twist, reducing the amount of tubing required to plumb a water system. Reusable, approved for use behind walls and underground.
Cash Acme U3523LFA Push Fit Tube Adapter Pro Bite 630-103HC/LF812MR Straight Tube To Pipe Adapter AmerTac Zenith PN10075EB CAT5E Network Cable
1/4" X 9/16"-24 UNEF thread. Connects to copper, PEX or CPVC, no glue, soldering, crimping or special tools, approved for in-wall and underground burial, approved for potable water, radiant and hydronic heating, easily repositioned or removed. Connects computer to hub or RJ45 wall jack. Black cable.
Watt PL-3031 Reducing Coupling Union CopperLoc 907 Non-Removable Tube Elbow Quick Connect P-648 Tube Stackable Tee
Plastic quick connect fittings are made from polysulfone, a high performance thermal plastic material. Design allows for quick and easy connections to pipe without installation tool. Use on copper, pex, CPVC and polybutylene pipe. Product meets all National Plumbing Codes. Copper and copper alloy push connect fittings provide plumbing system design flexibility by allowing you to join copper, CPVC, or PEX lines with just one fitting. Push fit, tool free, permanent fitting. pre-lubed for quick installation, approved for underground installations. Works with copper, CPVC, Pex, LPDE, MPDE, HDPE and polybutylene tubing in hot and cold water applications. Incorporates stainless steel gripping teeth in the collets, allowing the connectors to interconnect with multiple materials without special tools or tube inserts. Exclusive O-ring guide insures zero-leak connections. Tube orientation can be changed by a simple twist, reducing the amount of tubing required to plumb a water system. Reusable, approved for use behind walls and underground.
Watts P Tube Elbow Watt PL-3030 Coupling Union Watts PL-3003 Tube Tee
Works with copper, CPVC, Pex, LPDE, MPDE, HDPE and polybutylene tubing in hot and cold water applications. Incorporates stainless steel gripping teeth in the collets, allowing the connectors to interconnect with multiple materials without special tools or tube inserts. Exclusive O-ring guide insures zero-leak connections. Tube orientation can be changed by a simple twist, reducing the amount of tubing required to plumb a water system. Reusable, approved for use behind walls and underground. Plastic quick connect fittings are made from polysulfone, a high performance thermal plastic material. Design allows for quick and easy connections to pipe without installation tool. Use on copper, pex, CPVC and polybutylene pipe. Product meets all National Plumbing Codes. Plastic quick connect fittings are made from polysulfone, a high performance thermal plastic material. Design allows for quick and easy connections to pipe without installation tool. Use on copper, pex, CPVC and polybutylene pipe. Product meets all National Plumbing Codes.
World Wide Sourcing 0745 Galvanized Malleable Cross Watts PL Tube Elbow Watts PL Tube Elbow
Flat banded, right hand threads. Plastic quick connect fittings are made from polysulfone, a high performance thermal plastic material. Design allows for quick and easy connections to pipe without installation tool. Use on copper, pex, CPVC and polybutylene pipe. Product meets all National Plumbing Codes. Plastic quick connect fittings are made from polysulfone, a high performance thermal plastic material. Design allows for quick and easy connections to pipe without installation tool. Use on copper, pex, CPVC and polybutylene pipe. Product meets all National Plumbing Codes.
Watt PL-3021 Reducing Coupling Union Watt PL-3020 Coupling Union Cash Acme U3537LFA Sharkbite
Plastic quick connect fittings are made from polysulfone, a high performance thermal plastic material. Design allows for quick and easy connections to pipe without installation tool. Use on copper, pex, CPVC and polybutylene pipe. Product meets all National Plumbing Codes. Plastic quick connect fittings are made from polysulfone, a high performance thermal plastic material. Design allows for quick and easy connections to pipe without installation tool. Use on copper, pex, CPVC and polybutylene pipe. Product meets all National Plumbing Codes. The SharkBite Connection System is an instant push-fit connection that connects copper tubing, CTS CPVC and PEX pipe in an combination - no soldering, clamps, unions or glue required. Certified to 200 PSI and 200DegF. Compact, robust DZR brass body. Foundation of a strong, corrosion resistant, durable fitting. Design certified to ANSI/NSF-61 and ASSE 1061 product standard for use in potable water and hydronic heating water distribution.Approved to be used underground and behind walls without access panels. Lead Free Complaint.
Cash Acme U3525LFA Push Fit Pipe to Tube Adapter Cash Acme U3531LFA Push Fit Tube Adapter Sharkbite U110LFA Pipe Reducing Adapter
The SharkBite Connection System is an instant push-fit connection that connects copper tubing, CTS CPVC and PEX pipe in an combination - no soldering, clamps, unions or glue required. Certified to 200 PSI and 200degF. Compact, robust DZR brass body. Foundation of a strong, corrosion resistant, durable fitting. Design certified to ANSI/NSF-61 and ASSE 1061 product standard for use in potable water and hydronic heating water distribution.Approved to be used underground and behind walls without access panels. Lead Free Complaint. The SharkBite Connection System is an instant push-fit connection that connects copper tubing, CTS CPVC and PEX pipe in an combination - no soldering, clamps, unions or glue required. Certified to 200 PSI and 200DegF. Compact, robust DZR brass body. Foundation of a strong, corrosion resistant, durable fitting. Design certified to ANSI/NSF-61 and ASSE 1061 product standard for use in potable water and hydronic heating water distribution.Approved to be used underground and behind walls without access panels. Lead Free Complaint. The SharkBite Connection System is an instant push-fit connection that connects copper tubing, CTS CPVC and PEX pipe in an combination - no soldering, clamps, unions or glue required. Certified to 200 PSI and 200DegF. Compact, robust DZR brass body. Foundation of a strong, corrosion resistant, durable fitting. Design certified to ANSI/NSF-61 and ASSE 1061 product standard for use in potable water and hydronic heating water distribution.Approved to be used underground and behind walls without access panels. Lead Free Complaint.
Sharkbite U066LFA Pipe Reducing Adapter Watts P Tube Elbow Watts P Tube Elbow
The SharkBite Connection System is an instant push-fit connection that connects copper tubing, CTS CPVC and PEX pipe in an combination - no soldering, clamps, unions or glue required. Certified to 200 PSI and 200DegF. Compact, robust DZR brass body. Foundation of a strong, corrosion resistant, durable fitting. Design certified to ANSI/NSF-61 and ASSE 1061 product standard for use in potable water and hydronic heating water distribution. Approved to be used underground and behind walls without access panels. Lead Free Complaint. Quick Connect connectors are designed and manufactured for many years of trouble free service. Produced of off-white Polysulfone, a high performance thermal plastic material, the design allows for quick and easy connections without the use of installation tools. NSF-61, NSF-14, CSA B137.5, ASTM F877, UPC, and ASSE 1061 approved. Polybagged. Works with copper, CPVC, PEX, LPDE, MPDE, HDPE and polybutylene tubing in hot and cold water applications. Incorporates stainless steel gripping teeth in the collets, allowing the connectors to interconnect with multiple materials without special tools or tube inserts. Exclusive O-ring guide insures zero-leak connections. Tube orientation can be changed by a simple twist, reducing the amount of tubing required to plumb a water system. Reusable, approved for use behind walls and underground. Polybagged.
CopperLoc 9707-3-5 Drop Ear Non-Removable Tube Elbow Watts P Stackable Tube Elbow CopperLoc 901-R Non-Removable Push-Fit Tube Reducing Coupling
Copper and copper alloy push connect fittings provide plumbing system design flexibility by allowing you to join copper, CPVC, or PEX lines with just one fitting. Push fit, tool free, permanent fitting. pre-lubed for quick installation, approved for underground installations. Bagged. Works with copper, CPVC, Pex, LPDE, MPDE, HDPE and polybutylene tubing in hot and cold water applications. Incorporates stainless steel gripping teeth in the collets, allowing the connectors to interconnect with multiple materials without special tools or tube inserts. Exclusive O-ring guide insures zero-leak connections. Tube orientation can be changed by a simple twist, reducing the amount of tubing required to plumb a water system. Reusable, approved for use behind walls and underground. Copper and copper alloy push connect fittings provide plumbing system design flexibility by allowing you to join copper, CPVC, or PEX lines with just one fitting. Push fit, tool free, permanent fitting. pre-lubed for quick installation, approved for underground installations. Bagged.
Sharkbite U276LFA Dishwasher Tube To Pipe Elbow Elkhart Tectite 911 CopperLoc Non-Removable Push-Fit Tube Tee Watts P-440 Tube Union Tee
The SharkBite Connection System is an instant push-fit connection that connects copper tubing, CTS CPVC and PEX pipe in an combination - no soldering, clamps, unions or glue required. Certified to 200 PSI and 200DegF. Compact, robust DZR brass body. Foundation of a strong, corrosion resistant, durable fitting. Design certified to ANSI/NSF-61 and ASSE 1061 product standard for use in potable water and hydronic heating water distribution.Approved to be used underground and behind walls without access panels. Lead Free Complaint. Copper and copper alloy push connect fittings provide plumbing system design flexibility by allowing you to join copper, CPVC, or PEX lines with just one fitting. Push fit, tool free, permanent fitting. pre-lubed for quick installation, approved for underground installations. Bagged. Works with copper, CPVC, PEX, LPDE, MPDE, HDPE and polybutylene tubing in hot and cold water applications. Incorporates stainless steel gripping teeth in the collets, allowing the connectors to interconnect with multiple materials without special tools or tube inserts. Exclusive O-ring guide insures zero-leak connections. Tube orientation can be changed by a simple twist, reducing the amount of tubing required to plumb a water system. Reusable, approved for use behind walls and underground. Polybagged.
Watts P-601 Push-Fit Tube Reducing Union World Wide Sourcing PPG130R-25X20X20 Galvanized Red Tee World Wide Sourcing PPG130R-25X15 Galvanized Red Tee
Works with copper, CPVC, Pex, LPDE, MPDE, HDPE and polybutylene tubing in hot and cold water applications. Incorporates stainless steel gripping teeth in the collets, allowing the connectors to interconnect with multiple materials without special tools or tube inserts. Exclusive O-ring guide insures zero-leak connections. Tube orientation can be changed by a simple twist, reducing the amount of tubing required to plumb a water system. Reusable, approved for use behind walls and underground. 1/2" CTS x 1/4" OD Flat banded, right hand threads. Flat banded, right hand threads.
World Wide Sourcing PPG130R-25X20 Galvanized Red Tee Pro Bite 630-203HC/LF812FR Straight Tube To Pipe Adapter Pro Bite 633-004HC/LF826R End Cap
Flat banded, right hand threads. Connects to copper, PEX or CPVC, no glue, soldering, crimping or special tools, approved for in-wall and underground burial, approved for potable water, radiant and hydronic heating, easily repositioned or removed. Connects to copper, PEX or CPVC, no glue, soldering, crimping or special tools, approved for in-wall and underground burial, approved for potable water, radiant and hydronic heating, easily repositioned or removed.
CopperLoc 10170890 Tube Cap Watts P-801 Push-Fit Tube Reducing Union Mueller ProLine Standard Tube Coupling
Copper and copper alloy push connect fitting. Push fit, tool free, permanent fitting. pre-lubed for quick installation, approved for underground installations. Works with copper, CPVC, PEX, LPDE, MPDE, HDPE and polybutylene tubing in hot and cold water applications. Incorporates stainless steel gripping teeth in the collets, allowing the connectors to interconnect with multiple materials without special tools or tube inserts. Exclusive O-ring guide insures zero-leak connections. Tube orientation can be changed by a simple twist, reducing the amount of tubing required to plumb a water system. Reusable, approved for use behind walls and underground. Polybagged. Connects to copper, PEX or CPVC, no glue, soldering, crimping or special tools, approved for in-wall and underground burial, approved for potable water, radiant and hydronic heating, easily repositioned or removed.
Watts P-640 Tube Union Tee Watts P Drop Ear Tube Elbow AmerTac Zenith PN10145EB CAT5E Network Cable
Works with copper, CPVC, PEX, LPDE, MPDE, HDPE and polybutylene tubing in hot and cold water applications. Incorporates stainless steel gripping teeth in the collets, allowing the connectors to interconnect with multiple materials without special tools or tube inserts. Exclusive O-ring guide insures zero-leak connections. Tube orientation can be changed by a simple twist, reducing the amount of tubing required to plumb a water system. Reusable, approved for use behind walls and underground. Polybagged. Works with copper, CPVC, Pex, LPDE, MPDE, HDPE and polybutylene tubing in hot and cold water applications. Incorporates stainless steel gripping teeth in the collets, allowing the connectors to interconnect with multiple materials without special tools or tube inserts. Exclusive O-ring guide insures zero-leak connections. Tube orientation can be changed by a simple twist, reducing the amount of tubing required to plumb a water system. Reusable, approved for use behind walls and underground. Connects computer to hub or RJ45 wall jack. Black cable.
Pro Bite 630-204HC/LF822FR Straight Tube To Pipe Adapter Watts P Tube Elbow Sharkbite U244LFA Tube Elbow
Connects to copper, PEX or CPVC, no glue, soldering, crimping or special tools, approved for in-wall and underground burial, approved for potable water, radiant and hydronic heating, easily repositioned or removed. Works with copper, CPVC, PEX, LPDE, MPDE, HDPE and polybutylene tubing in hot and cold water applications. Incorporates stainless steel gripping teeth in the collets, allowing the connectors to interconnect with multiple materials without special tools or tube inserts. Exclusive O-ring guide insures zero-leak connections. Tube orientation can be changed by a simple twist, reducing the amount of tubing required to plumb a water system. Reusable, approved for use behind walls and underground. Polybagged. The SharkBite Connection System is an instant push-fit connection that connects copper tubing, CTS CPVC and PEX pipe in an combination - no soldering, clamps, unions or glue required. Certified to 200 PSI and 200DegF. Compact, robust DZR brass body. Foundation of a strong, corrosion resistant, durable fitting. Design certified to ANSI/NSF-61 and ASSE 1061 product standard for use in potable water and hydronic heating water distribution. Approved to be used underground and behind walls without access panels. Lead Free Complaint.
Sharkbite U004LFA Straight Tube Coupling Pro Bite 630-104HC/LF822MR Straight Tube To Pipe Adapter Watts P-800 Push-Fit Tube Union
The SharkBite Connection System is an instant push-fit connection that connects copper tubing, CTS, CPVC and PEX  pipe in any combination - no soldering, clamps, unions or glue required. Certified to 200 PSI and 200DegF. Compact, robust DZR brass body. Foundation of a strong, corrosion resistant, durable fitting. Design certified to ANSI/NSF-61 and ASSE 1061 product standard for use in potable water and hydronic heating water distribution.Approved to be used underground and behind walls without access panels. Lead Free Complaint. Connects to copper, PEX or CPVC, no glue, soldering, crimping or special tools, approved for in-wall and underground burial, approved for potable water, radiant and hydronic heating, easily repositioned or removed. Works with copper, CPVC, Pex, LPDE, MPDE, HDPE and polybutylene tubing in hot and cold water applications. Incorporates stainless steel gripping teeth in the collets, allowing the connectors to interconnect with multiple materials without special tools or tube inserts. Exclusive O-ring guide insures zero-leak connections. Tube orientation can be changed by a simple twist, reducing the amount of tubing required to plumb a water system. Reusable, approved for use behind walls and underground.
World Wide Sourcing 0747 Galvanized P Malleable Cross CABLE NTWK CAT 6E RJ45 BLK 7FT Elkhart Tectite 911 CopperLoc Non-Removable Push-Fit Tube Tee
Flat banded, right hand threads. Connects computer to hub or RJ45 wall jack. Black cable. Copper and copper alloy push connect fittings provide plumbing system design flexibility by allowing you to join copper, CPVC, or PEX lines with just one fitting. Push fit, tool free, permanent fitting. pre-lubed for quick installation, approved for underground installations. Bagged.
Sharkbite U120LFA Straight Pipe Adapter World Wide Sourcing PPG180-25 Galvanized Malleable Cross Pro Bite 631-003HC Tube Elbow
The SharkBite Connection System is an instant push-fit connection that connects copper tubing, CTS CPVC and PEX pipe in an combination - no soldering, clamps, unions or glue required. Certified to 200 PSI and 200DegF. Compact, robust DZR brass body. Foundation of a strong, corrosion resistant, durable fitting. Design certified to ANSI/NSF-61 and ASSE 1061 product standard for use in potable water and hydronic heating water distribution. Approved to be used underground and behind walls without access panels. Lead Free Complaint. Flat banded, right hand threads. Connects to copper, PEX or CPVC, no glue, soldering, crimping or special tools, approved for in-wall and underground burial, approved for potable water, radiant and hydronic heating, easily repositioned or removed.
Elkhart Tectite 911R CopperLoc Non-Removable Push-Fit Reducing Tee Sharkbite U514LFA End Cap Sharkbite U072LFA Pipe Reducing Adapter
Copper and copper alloy push connect fittings provide plumbing system design flexibility by allowing you to join copper, CPVC, or PEX lines with just one fitting. Push fit, tool free, permanent fitting. pre-lubed for quick installation, approved for underground installations. Bagged. The SharkBite Connection System is an instant push-fit connection that connects copper tubing, CTS CPVC and PEX pipe in an combination - no soldering, clamps, unions or glue required. Certified to 200 PSI and 200DegF. Compact, robust DZR brass body. Foundation of a strong, corrosion resistant, durable fitting. Design certified to ANSI/NSF-61 and ASSE 1061 product standard for use in potable water and hydronic heating water distribution.Approved to be used underground and behind walls without access panels. Lead Free Complaint. The SharkBite Connection System is an instant push-fit connection that connects copper tubing, CTS CPVC and PEX pipe in an combination - no soldering, clamps, unions or glue required. Certified to 200 PSI and 200DegF. Compact, robust DZR brass body. Foundation of a strong, corrosion resistant, durable fitting. Design certified to ANSI/NSF-61 and ASSE 1061 product standard for use in potable water and hydronic heating water distribution. Approved to be used underground and behind walls without access panels. Lead Free Complaint.
Mueller ProLine Standard Tube Coupling DISCONECT W/GAUGE1/2-3/4-1 3PK Watts PL-3023 Tube Tee
Connects to copper, PEX or CPVC, no glue, soldering, crimping or special tools, approved for in-wall and underground burial, approved for potable water, radiant and hydronic heating, easily repositioned or removed. The SharkBite PVC IPS (Iron Pipe Size) disconnect clip can be used the release a SharkBite PVC IPS Fitting from Sch. 40, 80, 120 PVC Pipe. The PVC disconnect clip will release the fitting on the white collar of the fitting. The PVC Disconnect Clip also serves as a safe seal depth gauge to mark the PVC Pipe to ensure the fitting has been inserted to the proper depth. Plastic quick connect fittings are made from polysulfone, a high performance thermal plastic material. Design allows for quick and easy connections to pipe without installation tool. Use on copper, pex, CPVC and polybutylene pipe. Product meets all National Plumbing Codes.
Watts P-616 Push-Fit Closet Tube Adapter Mueller ProLine Tube Reducing Coupling Sharkbite U006LFA Straight Tube Coupling
Works with copper, CPVC, Pex, LPDE, MPDE, HDPE and polybutylene tubing in hot and cold water applications. Incorporates stainless steel gripping teeth in the collets, allowing the connectors to interconnect with multiple materials without special tools or tube inserts. Exclusive O-ring guide insures zero-leak connections. Tube orientation can be changed by a simple twist, reducing the amount of tubing required to plumb a water system. Reusable, approved for use behind walls and underground. Connects to copper, PEX or CPVC, no glue, soldering, crimping or special tools, approved for in-wall and underground burial, approved for potable water, radiant and hydronic heating, easily repositioned or removed. The SharkBite Connection System is an instant push-fit connection that connects copper tubing, CTS, CPVC and PEX  pipe in any combination - no soldering, clamps, unions or glue required. Certified to 200 PSI and 200DegF. Compact, robust DZR brass body. Foundation of a strong, corrosion resistant, durable fitting. Design certified to ANSI/NSF-61 and ASSE 1061 product standard for use in potable water and hydronic heating water distribution.Approved to be used underground and behind walls without access panels. Lead Free Complaint.
Watts P-617 Push-Fit Tube To Pipe Adapter Sharkbite U512LFA End Cap END STOP 1 INCH
Works with copper, CPVC, Pex, LPDE, MPDE, HDPE and polybutylene tubing in hot and cold water applications. Incorporates stainless steel gripping teeth in the collets, allowing the connectors to interconnect with multiple materials without special tools or tube inserts. Exclusive O-ring guide insures zero-leak connections. Tube orientation can be changed by a simple twist, reducing the amount of tubing required to plumb a water system. Reusable, approved for use behind walls and underground. The SharkBite Connection System is an instant push-fit connection that connects copper tubing, CTS CPVC and PEX pipe in an combination - no soldering, clamps, unions or glue required. Certified to 200 PSI and 200DegF. Compact, robust DZR brass body. Foundation of a strong, corrosion resistant, durable fitting. Design certified to ANSI/NSF-61 and ASSE 1061 product standard for use in potable water and hydronic heating water distribution.Approved to be used underground and behind walls without access panels. Lead Free Complaint. Connects to copper, CPVC, PEX, LPDE, MPDE, HDPE and polybutylene tubing.
Watts PL-3033 Tube Tee Sharkbite U009LFA Tube Reducing Coupling 1IN CTS ELBOW
Plastic quick connect fittings are made from polysulfone, a high performance thermal plastic material. Design allows for quick and easy connections to pipe without installation tool. Use on copper, pex, CPVC and polybutylene pipe. Product meets all National Plumbing Codes. The SharkBite Connection System is an instant push-fit connection that connects copper tubing, CTS, CPVC and PEX  pipe in any combination - no soldering, clamps, unions or glue required. Certified to 200 PSI and 200DegF. Compact, robust DZR brass body. Foundation of a strong, corrosion resistant, durable fitting. Design certified to ANSI/NSF-61 and ASSE 1061 product standard for use in potable water and hydronic heating water distribution.Approved to be used underground and behind walls without access panels. Lead Free Complaint. Watts Pipe Elbow, 1 in Nominal, CTS x CTS End, 90 Deg, 100 Psi At 180 Deg F, 250 Psi At 75 Deg F Working, Plastic, Standards: FDA, ANSI/NSF-61, NSF-14, CSA B1375, ASTM F877, NSF-UP and IAPMO ASSE 1061-2006, For New Installations or Plumbing Repair Applications
Pro Bite 631-103HC Drop Ear Tube To Pipe Elbow Sharkbite U116LFA Pipe Reducing Adapter Sharkbite U008LFA Straight Tube Coupling
Connects to copper, PEX or CPVC, no glue, soldering, crimping or special tools, approved for in-wall and underground burial, approved for potable water, radiant and hydronic heating, easily repositioned or removed. The SharkBite Connection System is an instant push-fit connection that connects copper tubing, CTS CPVC and PEX pipe in an combination - no soldering, clamps, unions or glue required. Certified to 200 PSI and 200DegF. Compact, robust DZR brass body. Foundation of a strong, corrosion resistant, durable fitting. Design certified to ANSI/NSF-61 and ASSE 1061 product standard for use in potable water and hydronic heating water distribution. Approved to be used underground and behind walls without access panels. Lead Free Complaint. The SharkBite Connection System is an instant push-fit connection that connects copper tubing, CTS, CPVC and PEX  pipe in any combination - no soldering, clamps, unions or glue required. Certified to 200 PSI and 200DegF. Compact, robust DZR brass body. Foundation of a strong, corrosion resistant, durable fitting. Design certified to ANSI/NSF-61 and ASSE 1061 product standard for use in potable water and hydronic heating water distribution.Approved to be used underground and behind walls without access panels. Lead Free Complaint.
Sharkbite U068LFA Pipe Reducing Adapter Sharkbite U088LFA Pipe Reducing Adapter Watts P-815 Push-Fit Tube To Pipe Adapter
The SharkBite Connection System is an instant push-fit connection that connects copper tubing, CTS CPVC and PEX pipe in an combination - no soldering, clamps, unions or glue required. Certified to 200 PSI and 200DegF. Compact, robust DZR brass body. Foundation of a strong, corrosion resistant, durable fitting. Design certified to ANSI/NSF-61 and ASSE 1061 product standard for use in potable water and hydronic heating water distribution. Approved to be used underground and behind walls without access panels. Lead Free Complaint. The SharkBite Connection System is an instant push-fit connection that connects copper tubing, CTS CPVC and PEX pipe in an combination - no soldering, clamps, unions or glue required. Certified to 200 PSI and 200DegF. Compact, robust DZR brass body. Foundation of a strong, corrosion resistant, durable fitting. Design certified to ANSI/NSF-61 and ASSE 1061 product standard for use in potable water and hydronic heating water distribution. Approved to be used underground and behind walls without access panels. Lead Free Complaint. Works with copper, CPVC, Pex, LPDE, MPDE, HDPE and polybutylene tubing in hot and cold water applications. Incorporates stainless steel gripping teeth in the collets, allowing the connectors to interconnect with multiple materials without special tools or tube inserts. Exclusive O-ring guide insures zero-leak connections. Tube orientation can be changed by a simple twist, reducing the amount of tubing required to plumb a water system. Reusable, approved for use behind walls and underground.
Sharkbite U134LFA Straight Pipe Adapter Quick Connect P-848 Tube Reducing Tee World Wide Sourcing PPG130R-32X20 Galv. Pipe Fitting
The SharkBite Connection System is an instant push-fit connection that connects copper tubing, CTS CPVC and PEX pipe in an combination - no soldering, clamps, unions or glue required. Certified to 200 PSI and 200DegF. Compact, robust DZR brass body. Foundation of a strong, corrosion resistant, durable fitting. Design certified to ANSI/NSF-61 and ASSE 1061 product standard for use in potable water and hydronic heating water distribution. Approved to be used underground and behind walls without access panels. Lead Free Complaint. Works with copper, CPVC, Pex, LPDE, MPDE, HDPE and polybutylene tubing in hot and cold water applications. Incorporates stainless steel gripping teeth in the collets, allowing the connectors to interconnect with multiple materials without special tools or tube inserts. Exclusive O-ring guide insures zero-leak connections. Tube orientation can be changed by a simple twist, reducing the amount of tubing required to plumb a water system. Reusable, approved for use behind walls and underground. Flat banded, right hand threads.
World Wide Sourcing PPG130R-32X25 Galv. Pipe Malleable Reducing Tee CONNECTOR MALE 1IN CTSX1IN MIP Watt PL-3016 Quick Connect Reducing Coupling Union
Flat banded, right hand threads. Incorporates stainless steel gripping teeth in the collets. These corrosion resistant teeth allow the connectors to interconnect with multiple materials without the need for special tools or tube inserts. It works with copper, CPVC, pex, LPDE, MPDE, HDPE and polybutylene tubing. Plastic quick connect fittings are made from polysulfone, a high performance thermal plastic material. Design allows for quick and easy connections to pipe without installation tool. Use on copper, pex, CPVC and polybutylene pipe. Product meets all National Plumbing Codes.
Sharkbite U050LFA Tube Reducing Coupling Sharkbite U281LFA Dishwasher Tube To Pipe Elbow Sharkbite U358LFA Tube Reducing Tee
The SharkBite Connection System is an instant push-fit connection that connects copper tubing, CTS, CPVC and PEX  pipe in any combination - no soldering, clamps, unions or glue required. Certified to 200 PSI and 200DegF. Compact, robust DZR brass body. Foundation of a strong, corrosion resistant, durable fitting. Design certified to ANSI/NSF-61 and ASSE 1061 product standard for use in potable water and hydronic heating water distribution.Approved to be used underground and behind walls without access panels. Lead Free Complaint. The SharkBite Connection System is an instant push-fit connection that connects copper tubing, CTS CPVC and PEX pipe in an combination - no soldering, clamps, unions or glue required. Certified to 200 PSI and 200DegF. Compact, robust DZR brass body. Foundation of a strong, corrosion resistant, durable fitting. Design certified to ANSI/NSF-61 and ASSE 1061 product standard for use in potable water and hydronic heating water distribution.Approved to be used underground and behind walls without access panels. Lead Free Complaint. The SharkBite Connection System is an instant push-fit connection that connects copper tubing, CTS CPVC and PEX pipe in an combination - no soldering, clamps, unions or glue required. Certified to 200 PSI and 200DegF. Compact, robust DZR brass body. Foundation of a strong, corrosion resistant, durable fitting. Design certified to ANSI/NSF-61 and ASSE 1061 product standard for use in potable water and hydronic heating water distribution. Approved to be used underground and behind walls without access panels. Lead Free Complaint.
CONNECT FEMALE 1IN CTSX1IN FIP Sharkbite U248LFA Tube Elbow Sharkbite U334LFA Drop Ear Tube To Pipe Elbow
Incorporates stainless steel gripping teeth in the collets. These corrosion resistant teeth allow the connectors to interconnect with multiple materials without the need for special tools or tube inserts. It works with copper, CPVC, pex, LPDE, MPDE, HDPE and polybutylene tubing. The SharkBite Connection System is an instant push-fit connection that connects copper tubing, CTS CPVC and PEX pipe in an combination - no soldering, clamps, unions or glue required. Certified to 200 PSI and 200DegF. Compact, robust DZR brass body. Foundation of a strong, corrosion resistant, durable fitting. Design certified to ANSI/NSF-61 and ASSE 1061 product standard for use in potable water and hydronic heating water distribution. Approved to be used underground and behind walls without access panels. Lead Free Complaint. The SharkBite Connection System is an instant push-fit connection that connects copper tubing, CTS CPVC and PEX pipe in an combination - no soldering, clamps, unions or glue required. Certified to 200 PSI and 200DegF. Compact, robust DZR brass body. Foundation of a strong, corrosion resistant, durable fitting. Design certified to ANSI/NSF-61 and ASSE 1061 product standard for use in potable water and hydronic heating water distribution.Approved to be used underground and behind walls without access panels. Lead Free Complaint.
CABLE NETWORK CAT-6 14FT      CONNECTOR FEMALE 3/4CTS X 1FPT Sharkbite U518LFA End Cap
Connects video components. Flexible PVC jacket. Incorporates stainless steel gripping teeth in the collets. These corrosion resistant teeth allow the connectors to interconnect with multiple materials without the need for special tools or tube inserts. It works with copper, CPVC, pex, LPDE, MPDE, HDPE and polybutylene tubing. The SharkBite Connection System is an instant push-fit connection that connects copper tubing, CTS CPVC and PEX pipe in an combination - no soldering, clamps, unions or glue required. Certified to 200 PSI and 200DegF. Compact, robust DZR brass body. Foundation of a strong, corrosion resistant, durable fitting. Design certified to ANSI/NSF-61 and ASSE 1061 product standard for use in potable water and hydronic heating water distribution.Approved to be used underground and behind walls without access panels. Lead Free Complaint.
Quick Connect P-841 Tube Reducing Tee Sharkbite U335LFA Hy-Ear Tube To Pipe Elbow Sharkbite U308LFA Tube To Pipe Elbow
Works with copper, CPVC, Pex, LPDE, MPDE, HDPE and polybutylene tubing in hot and cold water applications. Incorporates stainless steel gripping teeth in the collets, allowing the connectors to interconnect with multiple materials without special tools or tube inserts. Exclusive O-ring guide insures zero-leak connections. Tube orientation can be changed by a simple twist, reducing the amount of tubing required to plumb a water system. Reusable, approved for use behind walls and underground. The SharkBite Connection System is an instant push-fit connection that connects copper tubing, CTS CPVC and PEX pipe in an combination - no soldering, clamps, unions or glue required. Certified to 200 PSI and 200DegF. Compact, robust DZR brass body. Foundation of a strong, corrosion resistant, durable fitting. Design certified to ANSI/NSF-61 and ASSE 1061 product standard for use in potable water and hydronic heating water distribution.Approved to be used underground and behind walls without access panels. Lead Free Complaint. The SharkBite Connection System is an instant push-fit connection that connects copper tubing, CTS CPVC and PEX pipe in an combination - no soldering, clamps, unions or glue required. Certified to 200 PSI and 200DegF. Compact, robust DZR brass body. Foundation of a strong, corrosion resistant, durable fitting. Design certified to ANSI/NSF-61 and ASSE 1061 product standard for use in potable water and hydronic heating water distribution. Approved to be used underground and behind walls without access panels. Lead Free Complaint.
AmerTac Zenith PN10255EB CAT5E Network Cable Sharkbite U280LFA Tube To Pipe Elbow CONNECTOR 1/2IN PVCX1/2IN MNPT
Connects computer to hub or RJ45 wall jack. Black cable. The SharkBite Connection System is an instant push-fit connection that connects copper tubing, CTS CPVC and PEX pipe in an combination - no soldering, clamps, unions or glue required. Certified to 200 PSI and 200DegF. Compact, robust DZR brass body. Foundation of a strong, corrosion resistant, durable fitting. Design certified to ANSI/NSF-61 and ASSE 1061 product standard for use in potable water and hydronic heating water distribution. Approved to be used underground and behind walls without access panels. Lead Free Complaint. Use to transition from iron pipe size PVC pipe to copper tube size copper, PEX, or CPVC, or PE-RT
Sharkbite U4008LFA Tube Conversion Coupling AmerTac Zenith PU1010ABB Type A/B 2.0 USB Cable Sharkbite U016LFA Straight Tube Coupling
Used to transition existing polybutylene pipe to copper, CPVC or PEX tubing. 200 psi maximum pressure. Type A to type B USB 2.0 cable. Connects USB compliant devices. Transfer speeds up to 480 Mbps. The SharkBite Connection System is an instant push-fit connection that connects copper tubing, CTS, CPVC and PEX  pipe in any combination - no soldering, clamps, unions or glue required. Certified to 200 PSI and 200DegF. Compact, robust DZR brass body. Foundation of a strong, corrosion resistant, durable fitting. Design certified to ANSI/NSF-61 and ASSE 1061 product standard for use in potable water and hydronic heating water distribution.Approved to be used underground and behind walls without access panels. Lead Free Complaint.
Pro Bite 631-004HC Tube Elbow Gardner Bender GMC-88C5 Modular Electrical Plug Pro Bite 632-003HC/LF814R Tube Tee
Connects to copper, PEX or CPVC, no glue, soldering, crimping or special tools, approved for in-wall and underground burial, approved for potable water, radiant and hydronic heating, easily repositioned or removed. Use with network/twisted pair cable CAT-5E, 8-position, 8-contact, rounded cable, solid wire. Connects to copper, PEX or CPVC, no glue, soldering, crimping or special tools, approved for in-wall and underground burial, approved for potable water, radiant and hydronic heating, easily repositioned or removed.
ELBOW DISHWASHER BRS 1/4X3/4IN Sharkbite U058LFA Tube Reducing Coupling Quick Connect P-641 Tube Reducing Tee
1/4" (3/8"OD) X 3/4" Garden hose nut. SharkBite is the Push-Fit connection system that is really taking hold. It?s the easiest way to join copper, CPVC or PEX pipe in any combination with no soldering, clamps, unions or glue. Just insert the pipe and the stainless steel teeth bite down and grip tight, while a specially formulated O-ring compresses to create a perfect seal. Disassembly is just as fast using the simple disconnect tool so fittings and valves can be easily changed and reused. They can even be rotated after assembly for easier installation in tight spaces. Designed to simplify pipe installation. Instant push-fit connection for increased ease-of-use- no soldering required. Fittings certified to 200 PSI and is an instant push-fit connection that connects copper tubing, CTS CPVC and PEX pipe in an combination - no soldering, clamps, unions or glue required. Certified to 200 PSI and 200DegF. Compact, robust DZR brass body. Foundation of a strong, corrosion resistant, durable fitting. Design certified to ANSI/NSF-61 and ASSE 1061 product standard for use in potable water and hydronic heating water distribution.Approved to be used underground and behind walls without access panels. Lead Free Complaint. 00 degrees F (93 degrees C). Fits OD controlled copper, CPVC, or PEX pipe. Design certified and agency listed. Compact, corrosion resistant, robust DZR brass body. Design certified to ANSI/NSF-61 product standard for use in potable water systems. No loose components, integrated design. Approved to be used underground and behind walls without access panels. Designed for hydronic heating as well as potable water distribution. Designed certified to IGC 188. Listed by IAPMO and are certified for potable and hydronic heating water distribution. Certified for underground applications and as a manufactured joint without access panels and they meet UPC, IPC, and cUPC requirements. Works with copper, CPVC, Pex, LPDE, MPDE, HDPE and polybutylene tubing in hot and cold water applications. Incorporates stainless steel gripping teeth in the collets, allowing the connectors to interconnect with multiple materials without special tools or tube inserts. Exclusive O-ring guide insures zero-leak connections. Tube orientation can be changed by a simple twist, reducing the amount of tubing required to plumb a water system. Reusable, approved for use behind walls and underground.
1/2FIPX3/4 GARDEN HSE VALVE   Watts P Tube Union Elbow Quick Connect P-840 Tube Union Tee
Quick connect design, For Pex, copper, or PVC pipe. Works with copper, CPVC, PEX, LPDE, MPDE, HDPE and polybutylene tubing in hot and cold water applications. Incorporates stainless steel gripping teeth in the collets, allowing the connectors to interconnect with multiple materials without special tools or tube inserts. Exclusive O-ring guide insures zero-leak connections. Tube orientation can be changed by a simple twist, reducing the amount of tubing required to plumb a water system. Reusable, approved for use behind walls and underground. Polybagged. Works with copper, CPVC, Pex, LPDE, MPDE, HDPE and polybutylene tubing in hot and cold water applications. Incorporates stainless steel gripping teeth in the collets, allowing the connectors to interconnect with multiple materials without special tools or tube inserts. Exclusive O-ring guide insures zero-leak connections. Tube orientation can be changed by a simple twist, reducing the amount of tubing required to plumb a water system. Reusable, approved for use behind walls and underground.
COUPLE TRANS 1/2CTS X1/2IN PVC Sharkbite U256LFA Tube Elbow World Wide Sourcing PPG130R-40X20 Galv Pipe Fitting
PVC trransition couplings connect PVC pipe (Sch. 40, 80, and 120) to Copper, PEX, CPVC and PE-RT pipe with no solder, clamps, unions or glue. The SharkBite Connection System is an instant push-fit connection that connects copper tubing, CTS CPVC and PEX pipe in an combination - no soldering, clamps, unions or glue required. Certified to 200 PSI and 200DegF. Compact, robust DZR brass body. Foundation of a strong, corrosion resistant, durable fitting. Design certified to ANSI/NSF-61 and ASSE 1061 product standard for use in potable water and hydronic heating water distribution. Approved to be used underground and behind walls without access panels. Lead Free Complaint. Flat banded, right hand threads.
World Wide Sourcing PPG130R-40X32 Galv. Pipe Fitting UNION 1 INCH CTS              AmerTac Zenith PU1005KTB USB Cable Kit
Flat banded, right hand threads. Incorporates stainless steel gripping teeth in the collets. These corrosion resistant teeth allow the connectors to interconnect with multiple materials without the need for special tools or tube inserts. It works with copper, CPVC, pex, LPDE, MPDE, HDPE and polybutylene tubing. Includes Mini 4 and 5, B, Micro and A. Connects any USB compliant device. Transfer speeds up to 480Mbps.
World Wide Sourcing PPG180-32 Galv. Pipe Fitting Sharkbite U274LFA Tube Reducing Elbow Sharkbite U249LFA Drop Ear Tube Elbow
Flat banded, right hand threads. The SharkBite Connection System is an instant push-fit connection that connects copper tubing, CTS CPVC and PEX pipe in an combination - no soldering, clamps, unions or glue required. Certified to 200 PSI and 200DegF. Compact, robust DZR brass body. Foundation of a strong, corrosion resistant, durable fitting. Design certified to ANSI/NSF-61 and ASSE 1061 product standard for use in potable water and hydronic heating water distribution. Approved to be used underground and behind walls without access panels. Lead Free Complaint. The SharkBite Connection System is an instant push-fit connection that connects copper tubing, CTS CPVC and PEX pipe in an combination - no soldering, clamps, unions or glue required. Certified to 200 PSI and 200DegF. Compact, robust DZR brass body. Foundation of a strong, corrosion resistant, durable fitting. Design certified to ANSI/NSF-61 and ASSE 1061 product standard for use in potable water and hydronic heating water distribution.Approved to be used underground and behind walls without access panels. Lead Free Complaint.
CONNECTOR 3/4IN PVCX3/4IN MNPT ELBOW PBSTAKABL 1IN CTSX1IN OD World Wide Sourcing PPG130R-50X40 Galv. Pipe Malleable Reducing Tee
Use to transition from iron pipe size PVC pipe to copper tube size copper, PEX, or CPVC, or PE-RT Watts Stackable Pipe Elbow, Type 18, Lead-Free, 1 in Nominal, CTS x CTS End, 90 Deg, 1 in Outside Diameter, 3 in Length, 100 Psi At 180 Deg F, 250 Psi At 75 Deg F Working, Polysulfone, White, Standards: NSF-61, NSF-14, CSA B137.5, ASTM F877, UPC, ASSE 1061, FM, USC, For Residential and Commercial Applications Flat banded, right hand threads.
ELBOW MALE PB 1IN CTSX1IN NPT CABLE NETWORK CAT-6 25FT      Watts P Tube Elbow
CABLE NETWORK CAT-6 25FT
Our Price: $10.98
Watts Tube To Pipe Male Elbow, Lead-Free, Type 19, 90 Deg, 1 in Nominal, CTS x NPT End, 100 Psi At 180 Deg F, 250 Psi At 75 Deg F Working, Polysulfone, White, 2-3/4 in Height x 1-3/4 in Height, Standards: NSF-61, NSF-14, CSA B137.5, ASTM F877, UPC, ASSE 1061, FM, USC, For Residential and Commercial Applications Connects video components. Flexible PVC jacket. Works with copper, CPVC, Pex, LPDE, MPDE, HDPE and polybutylene tubing in hot and cold water applications. Incorporates stainless steel gripping teeth in the collets, allowing the connectors to interconnect with multiple materials without special tools or tube inserts. Exclusive O-ring guide insures zero-leak connections. Tube orientation can be changed by a simple twist, reducing the amount of tubing required to plumb a water system. Reusable, approved for use behind walls and underground.
Pro Bite 632-443HC/LF844R Tube Reducing Tee World Wide Sourcing PPG180-40 Galvanized Malleable Cross Sharkbite U142LFA Pipe Reducing Adapter
Connects to copper, PEX or CPVC, no glue, soldering, crimping or special tools, approved for in-wall and underground burial, approved for potable water, radiant and hydronic heating, easily repositioned or removed. Flat banded, right hand threads. The SharkBite Connection System is an instant push-fit connection that connects copper tubing, CT