Home > PLUMBING > KITCHEN & BATH > FIXTURES > SHOWER STALLS / KITS
Sort By:
1
Halex 71205B 2-Hole Conduit Strap Halex 61612B 2-Hole Snap-On Conduit Strap Halex 71210B 2-Hole Conduit Strap
Indoor or outdoor applications. Use to secure PVC conduit to wood, masonry or similar surface. Bulk packed. To support EMT conduit where greater load bearing is required. Indoor or outdoor applications. Indoor or outdoor applications. Use to secure PVC conduit to wood, masonry or similar surface. Bulk packed.
Halex 71212B 2-Hole Conduit Strap Halex 96163 2-Hole Snap-On Conduit Strap Carlon Snap Strap E978DC-CAR 1-Hole Single Conduit Strap
Indoor or outdoor applications. Use to secure PVC conduit to wood, masonry or similar surface. Bulk packed. To support EMT conduit where greater load bearing is required. Indoor or outdoor applications. Safe, non-conductive. To be used in accordance with NEC, Article 347.8 conduit spacing requirements. For use with Schedule 40/80 non-metallic solvent weld fittings.
Halex 71215B 2-Hole Conduit Strap Carlon Snap Strap E978EC-CAR 1-Hole Single Conduit Strap Halex 96111 1-Hole Conduit Strap
Indoor or outdoor applications. Use to secure PVC conduit to wood, masonry or similar surface. Bulk packed. Safe, non-conductive. To be used in accordance with NEC, Article 347.8 conduit spacing requirements. For use with Schedule 40/80 non-metallic solvent weld fittings. Indoor or outdoor applications. Use to secure Rigid or I.M.C. conduit to wood, masonry or similar surfaces.
Halex 61220B 2-Hole Conduit Strap Halex 71220B 2-Hole Conduit Strap Carlon Snap Strap E978FC-CAR 1-Hole Single Conduit Strap
Indoor or outdoor use. Use to secure Rigid or IMC conduit to wood, masonry or similar surfaces where greater load bearing is required. UL Listed, CSA Approved. Indoor or outdoor applications. Use to secure PVC conduit to wood, masonry or similar surface. Bulk packed. Safe, non-conductive. To be used in accordance with NEC, Article 347.8 conduit spacing requirements. For use with Schedule 40/80 non-metallic solvent weld fittings.
Halex 96121 2-Hole Conduit Strap Thomas & Betts E977DC-CTN 2-Hole Conduit Clamp Halex 96151 1-Hole Snap-On Conduit Strap
Indoor or outdoor use. Use to secure Rigid or IMC conduit to wood, masonry or similar surfaces where greater load bearing is required. UL Listed, CSA Approved. Offers same chemical resistance as Carlon nonmetallic conduit for a complete, corrosion resistant system. UV resistant for use in direct sunlight. Use in accordance with conduit spacing requirements per NEC. Each clamp requires 2 screws, 2 nuts, and 2 washers. Gray clamps for standard conduit. Indoor or outdoor applications. To support EMT conduit.
Halex 96780 Conduit Hanger Halex 96161 2-Hole Snap-On Conduit Strap Halex 96112 1-Hole Conduit Strap
Use to secure and suspend conduit from overhead supports. Comes with a nut and bolt. To support EMT conduit where greater load bearing is required. Indoor or outdoor applications. Indoor or outdoor applications. Use to secure Rigid or I.M.C. conduit to wood, masonry or similar surfaces.
Halex 96213 1-Hole Cable Strap Halex 96781 Conduit Hanger Thomas & Betts E977EC-CTN 2-Hole Conduit Clamp
Steel, use to secure BX cable to wood, masonry or similar surface. Use to secure and suspend conduit from overhead supports. Comes with a nut and bolt. Offers same chemical resistance as Carlon nonmetallic conduit for a complete, corrosion resistant system. UV resistant for use in direct sunlight. Use in accordance with conduit spacing requirements per NEC. Each clamp requires 2 screws, 2 nuts, and 2 washers. Gray clamps for standard conduit.
Halex 96122 2-Hole Conduit Strap Halex 96162 2-Hole Snap-On Conduit Strap STRAP CBL 1HOLE SRVC ENT
Indoor or outdoor use. Use to secure Rigid or IMC conduit to wood, masonry or similar surfaces where greater load bearing is required. UL Listed, CSA Approved. To support EMT conduit where greater load bearing is required. Indoor or outdoor applications. Indoors or outdoors. Steel, use to secure service entrance cable (SEU, SER) to wood, masonry or similar surface.
Halex 96152 1-Hole Snap-On Conduit Strap Halex 26155 1-Hole Snap-On Conduit Strap Halex 26211 1-Hole Conduit Strap
Indoor or outdoor applications. To support EMT conduit. Indoor or outdoor applications. To support EMT conduit. Steel, use to secure BX cable to wood, masonry or similar surface.
Halex 61225 2-Hole Conduit Strap Halex 26210 1-Hole Service Entrance Strap CordMate Legrand C Wireway Outside Elbow
To support EMT conduit where greater load bearing is required. Indoor or outdoor applications. Indoors or outdoors. Steel, use to secure service entrance cable (SEU, SER) to wood, masonry or similar surface. Hides and organizes loose cords and wires.
CordMate Legrand C Wireway Inside Elbow CordMate Legrand C Wireway Flat Elbow Halex 16010B Ground Clamp
Hides and organizes loose cords and wires. Hides and organizes loose cords and wire. Indoor or outdoor applications. Use to secure the grounding wire to a 1/2" through 1" pipe. UL Listed. Wire size fits #10 - #2 AWG.
Halex 26165 2-Hole Snap-On Conduit Strap CordMate Legrand C19 Channel Coupling Halex 26153 1-Hole Snap-On Conduit Strap
To support EMT conduit where greater load bearing is required. Indoor or outdoor applications. Joins channels that hide and organize loose cords and wires. UL Listed. Indoor or outdoor applications. To support EMT conduit.
CordMate II Legrand C Wireway Flat Elbow Halex 26125 2-Hole Conduit Strap Bell 5269-5 Closure Plug
Hides and organizes loose cords and wire. Indoor or outdoor use. Use to secure Rigid or IMC conduit to wood, masonry or similar surfaces where greater load bearing is required. UL Listed, CSA Approved. For use with weatherproof boxes, extension adapters, cluster covers and round splice boxes to seal off unused outlets.
Bell 5269-7 Closure Plug Bell 5269-6 Closure Plug CordMate II Legrand C Wireway Inside Elbow
For use with weatherproof boxes, extension adapters, cluster covers and round splice boxes to seal off unused outlets. For use with weatherproof boxes, extension adapters, cluster covers and round splice boxes to seal off unused outlets. For making a 90 degree turn around an inside corner from wall-to-wall or wall-to-ceiling.
CordMate II Legrand C Wireway Outside Elbow CordMate II Legrand C59 Joint Cover Channel Coupling CordMate II Legrand C 3-Way Standard T-Fitting
For making a 90 degree turn around an outside corner. Joins channels that hide and organize loose cords and wires. UL Listed. For installation requiring 3-way branching including 90-degree angle.
Gardner Bender GGS-1512R Ground Screw Carlon E977LC-CAR Conduit Clamp FAUCET HANDLE WHEEL ROUND 12PT
Green round washer head screw for switch and outlet boxes. Offers same chemical resistance as Carlon nonmetallic conduit for a complete, corrosion resistant system. UV resistant for use in direct sunlight. Use in accordance with conduit spacing requirements per NEC. Each clamp requires 2 screws, 2 nuts, and 2 washers. Gray clamps for standard conduit. Metal construction. 12pt. round broach. Metallic finish. Designed to fit hose bibb faucets, stopcocks and valves.
Halex 26163 2-Hole Snap-On Conduit Strap Thomas & Betts E977FC-CTN 2-Hole Conduit Clamp Halex 26126 2-Hole Conduit Strap
To support EMT conduit where greater load bearing is required. Indoor or outdoor applications. Offers same chemical resistance as Carlon nonmetallic conduit for a complete, corrosion resistant system. UV resistant for use in direct sunlight. Use in accordance with conduit spacing requirements per NEC. Each clamp requires 2 screws, 2 nuts, and 2 washers. Gray clamps for standard conduit. Indoor or outdoor use. Use to secure Rigid or IMC conduit to wood, masonry or similar surfaces where greater load bearing is required. UL Listed, CSA Approved.
Bell 5269-0 Closure Plug Bell 5270-5 Closure Plug Danco 35646 Assorted Faucet Handle Screw
For use with weatherproof boxes, extension adapters, cluster covers and round splice boxes to seal off unused outlets. For use with weatherproof boxes, extension adapters, cluster covers and round splice boxes to seal off unused outlets. Handle screws for American Standard, Gerber & Price Pfister handles. Includes oval and flat head screws, two No.35639 and two No.35646.
STRAP CBL 1HOLE OVAL SRVC ENT Calterm 61606 Terminal Lug Eritech CP58 Acorn Standard Duty Ground Clamp
Indoors or outdoors. Steel, use to secure service entrance cable (SEU, SER) to wood, masonry or similar surface. Dimensions: 3/8" stud x 2-3/8" length. Connects grounding wire to the grounding rod. UL and CSA Listed for 1/2" and 5/8" ground rods and number 4 rebar and accept a conductor range from number 10 solid to number 2 stranded.
Gardner Bender GCC-310 2-Hole Conduit Strap Halex 26154 1-Hole Snap-On Conduit Strap Danco 88356 Assorted Faucet Handle Screw
Heavy-duty polyethylene, resists deterioration from UV rays and breakage from extreme cold. Enables secure fastening of plastic electrical conduit, schedule 40 PVC, copper tubing. Indoor or outdoor applications. To support EMT conduit. Includes oval and flat head screws, two No.35639, two No.35652, No.35646 No. 35658, and No.35659.
Halex 93591 Ground Clamp Halex 67860 Conduit Hanger Halex 26156 1-Hole Snap-On Conduit Strap
Connects grounding wire to the grounding rod. Use to secure and suspend conduit from overhead supports. Comes with a nut and bolt. Indoor or outdoor applications. To support EMT conduit.
Gardner Bender GGC-1508 Ground Clip Halex 26166 2-Hole Snap-On Conduit Strap Eritech ZWP1J Grounding Pipe Clamp
For aluminum or copper grounding wire zinc plated. To support EMT conduit where greater load bearing is required. Indoor or outdoor applications. Bolted water pipe clamps made of zinc die-cast. Wire range 8 sol. - 2 str. UL Listed. Connects grounding wire to the grounding rod.
Thomas & Betts E977GC-CTN 2-Hole Conduit Clamp Gardner Bender GTA-2 Mechanical Lug Halex 61230 2-Hole Conduit Strap
Offers same chemical resistance as Carlon nonmetallic conduit for a complete, corrosion resistant system. UV resistant for use in direct sunlight. Use in accordance with conduit spacing requirements per NEC. Each clamp requires 2 screws, 2 nuts, and 2 washers. Gray clamps for standard conduit. Single conductor, features high-strength, low-resistance aluminum construction. Accepts wire from number 14 to number 10 gauge AWG stranded, and number 14 to number 2 gauge AWG solid. UL Listed. Card of 2. Indoor or outdoor use. Use to secure Rigid or IMC conduit to wood, masonry or similar surfaces where greater load bearing is required. UL Listed, CSA Approved.
Gardner Bender GGP-1502 Grounding Pigtail Halex 26164 2-Hole Snap-On Conduit Strap Gardner Bender GCC-410 2-Hole Conduit Strap
AWG solid number 12 wire. 8" long with captured screw, other end bare fork terminal. To support EMT conduit where greater load bearing is required. Indoor or outdoor applications. Heavy-duty polyethylene, resists deterioration from UV rays and breakage from extreme cold. Enables secure fastening of plastic electrical conduit, schedule 40 PVC, copper tubing.
Danco 88355 Assorted Faucet Handle Screw Legrand NM7 Nonmetallic Raceway Inside Elbow Legrand NM8 Nonmetallic Raceway Outside Elbow
Handle screws for Central, Sayco and Sterling handles. Includes oval head screws, two No.35636, two No.35657 and No.35141. For making a 90 degree inside turn around a corner from wall-to-wall or wall-to-ceiling. For making a 90 degree outside turn around a corner.
Wiremold NM910 Connection Cover CordMate Legrand NM Raceway Wireway Inside Elbow Legrand NMW910 Raceway Accessory Pack
Mounting components for NMI wire channel, including screws and anchors, wire clips and joint cover. For making a 90 degree inside turn around a corner from wall-to-wall or wall-to-ceiling. Mounting components for NMI wire channel, including screws and anchors, wire clips and joint cover.
CordMate Legrand NM Raceway Wireway Outside Elbow Hubbell 5193-0 3-Hole Cluster Lampholder Cover Bell Raco 5193-1 Round Cluster Cover
For making a 90 degree outside turn around a corner. For wet locations. Gasket, screws and plugs included. 4" cluster cover. Use 75-150 watt maximum, Die cast zinc. One 1/2" NPT hole. UL Listed. For wet locations. Gasket, screws and plugs included. 4" cluster cover. Use 75-150 watt maximum, Die cast zinc. One 1/2" NPT hole. UL Listed.
Danco 80654 Faucet Handle Adapter Calterm 61607 Terminal Lug Gardner Bender 14-GRC Ground Clamp
Specially designed insert with unique three-point contact provides superior locking to all stems, regardless of size, configuration or damaged condition. Includes Allen wrench. Dimensions: 3/8" stud x 2-3/8" length. Connects grounding wire to the grounding rod.
DANCO 10495 Dual Threaded Water Saving Faucet Aerator Thomas & Betts E977HC-CTN 2-Hole Conduit Clamp Fishock GRC-FS Ground Clamp
Dual removable/replaceable insert. Microban. Twisting spray pattern. 1.5 GPM. Offers same chemical resistance as Carlon nonmetallic conduit for a complete, corrosion resistant system. UV resistant for use in direct sunlight. Use in accordance with conduit spacing requirements per NEC. Each clamp requires 2 screws, 2 nuts, and 2 washers. Gray clamps for standard conduit. Helps to make a superior connection of ground wire to ground rod. Heavy duty construction for long usage.
Gardner Bender GCC-120 2-Hole Conduit Strap Gardner Bender GCC-510 2-Hole Conduit Strap Gardner Bender GCC-220 2-Hole Conduit Strap
Heavy-duty polyethylene, resists deterioration from UV rays and breakage from extreme cold. Enables secure fastening of plastic electrical conduit, schedule 40 PVC, copper tubing. Heavy-duty polyethylene, resists deterioration from UV rays and breakage from extreme cold. Enables secure fastening of plastic electrical conduit, schedule 40 PVC, copper tubing. Heavy-duty polyethylene, resists deterioration from UV rays and breakage from extreme cold. Enables secure fastening of plastic electrical conduit, schedule 40 PVC, copper tubing.
Halex 36010 Ground Clamp Hubbell 5186-0 1-Hole Cluster Lampholder Cover Whedon SA1C Dual Thread Faucet Aerator
Indoor or outdoor applications. Use to secure the grounding wire to a 1/2" through 1" pipe. UL Listed. Wire size fits #10 - #2 AWG. For wet locations. Gasket, screws and plugs included. Use 75-150 watt maximum, Par-38 lamps. Die cast zinc, powder coat finish provides maximum weatherability and scratch resistance. Includes installation hardware, gasket, and multi-lingual instructions. One 1/2" NPT hole. Underwriters Recognized Component CSA C22.2 No. 18 NEMA 3R Rated. Standard faucet attachments provide superior stream straightness.  Rated at 2.2 GPM maximum flow at 60 psi, complies with federal codes.  Dual thread brass shell with 15/16ths male and 55/64ths female threads, fits most faucets
Bell Raco 5186 Rectangular Cluster Cover Bell Raco 5186-6 1-Hole Cluster Rectangular Weatherproof Cover Oatey 33444 Faucet Hose Adapter
For wet locations. Gasket, screws and plugs included. Use 75-150 watt maximum, Par-38 lamps. Die cast zinc, powder coat finish provides maximum weatherability and scratch resistance. Includes installation hardware, gasket, and multi-lingual instructions. One 1/2" NPT hole. Underwriters Recognized Component CSA C22.2 No. 18 NEMA 3R Rated. For wet locations. Gasket, screws and plugs included. Use 75-150 watt maximum, Par-38 lamps. Die cast zinc, powder coat finish provides maximum weatherability and scratch resistance. Includes installation hardware, gasket, and multi-lingual instructions. One 1/2" NPT hole. Underwriters Recognized Component CSA C22.2 No. 18 NEMA 3R Rated. Easily connects garden hose to kitchen or bathroom faucet for use with the Clog Buster. Use to unclog drain pipes without chemicals in bathtubs, showers, sinks, main drains and washing machines.
Thomas & Betts E977JCR-CTN 2-Hole Conduit Clamp DANCO 10476 Dual Threaded Water Saving Faucet Aerator Gardner Bender GSLU-35 Single Hole Mechanical Lug
Offers same chemical resistance as Carlon nonmetallic conduit for a complete, corrosion resistant system. UV resistant for use in direct sunlight. Use in accordance with conduit spacing requirements per NEC. Each clamp requires 2 screws, 2 nuts, and 2 washers. Gray clamps for standard conduit. Dual thread, watersense, removable/replaceable insert, twisting spray pattern force. 1.5 gpm. 15/16"-27M x 55/64"-27F Rated for 600 volt copper only. Single hole lugs, easy to install with screwdriver, wrench or pliers. 3/8" bolt size.
AERATOR RUBBER SLIP 2.2GPM WHT Danco 36162B Aerator Screens World Wide Sourcing PMB-057 Faucet Aerators
360 degree motion sprayer, aerated stream and aerated wide spray, dual threads 55/64". Ideal for mobile home kitchen sinks. Use with a regulator/retainer in place of an aerator. Triple chrome plated. Bagged 15/16" MIP x 55/64" FIP.
DANCO 10496 Dual Threaded Water Saving Faucet Aerator DANCO 10497 Dual Threaded Water Saving Faucet Aerator Bell Raco 5193-7 3-Hole Cluster Lamp Holder Cover
Removable/replaceable watersaving inserts, twisting spray pattern. Removable/replaceable watersaving inserts, twisting spray pattern. For wet locations. Gasket, screws and plugs included. 4" cluster cover. Use 75-150 watt maximum, Die cast zinc. One 1/2" NPT hole. UL Listed.
Bell Raco 5193-5 Round Cluster Cover Bell Raco 5193-6 Round Cluster Cover Hubbell 5320-0 Outlet Box
For wet locations. Gasket, screws and plugs included. 4" cluster cover. Use 75-150 watt maximum, Die cast zinc. One 1/2" NPT hole. UL Listed. For wet locations. Gasket, screws and plugs included. 4" cluster cover. Use 75-150 watt maximum, Die cast zinc. One 1/2" NPT hole. UL Listed. For use in wet, damp or dry locations. Three 1/2" threaded outlets. 2" deep with lugs. May be used as a weatherproof junction box, or as a housing for receptacles, switches, and GFCIs. Powder coat finish. Eight box mounting options with detachable lugs provided. Includes two closure plugs. Ground screw installed. Multi-lingual instructions. Internal threads and hubs comply with NEMA requirements. Hubs accept all threaded fittings and threaded conduit. Die cast aluminum construction. 18.3 cubic inch capacity. 2" depth x 4-1/2" length x 2-3/4" width. UL Listed. NEMA 3R rated.
Bell Raco 5320-1 Weatherproof Box Hubbell 5197-0 3-Hole Cluster Lampholder Cover Bell Raco 5197-2 Round Cluster Cover
For use in wet, damp or dry locations. Three 1/2" threaded outlets. 2" deep with lugs. May be used as a weatherproof junction box, or as a housing for receptacles, switches, and GFCIs. Powder coat finish. Eight box mounting options with detachable lugs provided. Includes two closure plugs. Ground screw installed. Multi-lingual instructions. Internal threads and hubs comply with NEMA requirements. Hubs accept all threaded fittings and threaded conduit. Die cast aluminum construction. 18.3 cubic inch capacity. 2" depth x 4-1/2" length x 2-3/4" width. UL Listed. NEMA 3R rated. For wet locations. Gasket, screws and plugs included. 4" cluster cover. Die cast zinc. Three 1/2" NPT holes. UL Listed. For wet locations. Gasket, screws and plugs included. 4" cluster cover. Die cast zinc. Three 1/2" NPT holes. UL Listed.
Bell Raco 5189 Rectangular Cluster Cover Bell Raco 5189 Rectangular Cluster Cover Hubbell 5189-0 3-Hole Cluster Lampholder Cover
Includes installation hardware, gasket, and multi-lingual instructions. 3 hole covers are supplied with two closure plugs. Die cast zinc construction. Three 1/2" NPT holes. UR - Underwrites recognized component CSA C22.2 No. 18 compliant. Includes installation hardware, gasket, and multi-lingual instructions. 3 hole covers are supplied with two closure plugs. Die cast zinc construction. Three 1/2" NPT holes. UR - Underwrites recognized component CSA C22.2 No. 18 compliant. Includes installation hardware, gasket, and multi-lingual instructions. 3 hole covers are supplied with two closure plugs. Die cast zinc construction. Three 1/2" NPT holes. UR - Underwrites recognized component CSA C22.2 No. 18 compliant.
Bell Raco 5197-1 Round Cluster Cover Danco 36190B Aerator Screens Danco 10510 Aerator Adapter
For wet locations. Gasket, screws and plugs included. 4" cluster cover. Die cast zinc. Three 1/2" NPT holes. UL Listed. Use with a regulator/retainer in place of an aerator. Triple chrome plated. Bagged 55/64" - 27M x 13/16" - 24F.
Legrand NM11 T-Fitting CordMate Legrand NMW11 3-Way T-Fitting Eritech CWP1J Grounding Pipe Clamp
For branching wire channel in two directions at 90 degree angles. For branching wire channel in two directions at 90 degree angles. Bolted water pipe grounding clamp. UL listed. Made of corrosion-resistant copper alloy.
Bell Raco 5606 Lampholder Bell Raco 5606 Lampholder Hubbell 5606 Adjustable Weatherproof Lampholder
Die cast zinc with porcelain socket. For wet locations. Use 75-150 watt maximum, Par-38 lamps. Includes gaskets and locknuts. UL Listed. Die cast zinc with porcelain socket. For wet locations. Use 75-150 watt maximum, Par-38 lamps. Includes gaskets and locknuts. UL Listed. Die cast zinc with porcelain socket. For wet locations. Use 75-150 watt maximum, Par-38 lamps. Includes gaskets and locknuts. UL Listed.
Cordmate Flex CM61 Split Flexible Tube PlumbPak PP800-10 Faucet Aerator Gardner Bender GCC-610 2-Hole Conduit Strap
Split flexible tube allows easy cord insert and removal. Peel and press connector. Bridges loose cables running from components to on-wall channels. Easy installation, no tools required. Fits Kohler, Briggs, Barnes, Chicago Indiana Brass and Speakman. 13/16''-27 diameter. 3.88''H x 2.88''W. Heavy-duty polyethylene, resists deterioration from UV rays and breakage from extreme cold. Enables secure fastening of plastic electrical conduit, schedule 40 PVC, copper tubing.
Legrand NM6 Nonmetallic Raceway Flat Elbow CordMate Legrand NM Raceway Wireway Flat Elbow PlumbPak PP800-1 Dual Threaded Slotted Faucet Aerator
For making 90 degree right or left turns on a flat surface. For making 90 degree right or left turns on a flat surface. Male/female, 15/16''-27. Inside threads, slotted. 3.88''Hx 2.88''W.
PlumbPak PP800-2 Dual Threaded Faucet Aerator Bell Raco 5189 Rectangular Cluster Cover Bell Raco 5197-5 Round Cluster Cover
15/16" diameter. 27 outside male threads, 55/64" - 27 inside female threads. Chrome plated. Includes installation hardware, gasket, and multi-lingual instructions. 3 hole covers are supplied with two closure plugs. Die cast zinc construction. Three 1/2" NPT holes. UR - Underwrites recognized component CSA C22.2 No. 18 compliant. For wet locations. Gasket, screws and plugs included. 4" cluster cover. Die cast zinc. Three 1/2" NPT holes. UL Listed.
Hubbell 5189-6 3-Hole Cluster Lampholder Cover Hubbell 5197-6 3-Hole Cluster Lampholder Cover LUG CU HD 6AWG 5/16IN STUD SZ
Includes installation hardware, gasket, and multi-lingual instructions. 3 hole covers are supplied with two closure plugs. Die cast zinc construction. Three 1/2" NPT holes. UR - Underwrites recognized component CSA C22.2 No. 18 compliant. For wet locations. Gasket, screws and plugs included. 4" cluster cover. Die cast zinc. Three 1/2" NPT holes. UL Listed. Heavy-duty lugs made from pure copper for maximum current flow. Tinned for corrosion resistance. Seamless barrel for maximum strength. Closed ends seal out moisture.
LUG CU HD 6AWG 3/8IN STUD SZ  Bell Raco 5197-7 3-Hole Cluster Round Weatherproof Cover Hubbell 5320-6 Outlet Box
Heavy-duty lugs made from pure copper for maximum current flow. Tinned for corrosion resistance. Seamless barrel for maximum strength. Closed ends seal out moisture. For wet locations. Gasket, screws and plugs included. 4" cluster cover. Die cast zinc. Three 1/2" NPT holes. UL Listed. For use in wet, damp or dry locations. Three 1/2" threaded outlets. 2" deep with lugs. May be used as a weatherproof junction box, or as a housing for receptacles, switches, and GFCIs. Powder coat finish. Eight box mounting options with detachable lugs provided. Includes two closure plugs. Ground screw installed. Multi-lingual instructions. Internal threads and hubs comply with NEMA requirements. Hubs accept all threaded fittings and threaded conduit. Die cast aluminum construction. 18.3 cubic inch capacity. 2" depth x 4-1/2" length x 2-3/4" width. UL Listed. NEMA 3R rated.
Danco 80970 Snap-In Faucet Index Button Bell Raco 5606 Adjustable Lampholder Bell Raco 5406-0 Weatherproof Extension Box
Fits single handle shower. Die cast zinc with porcelain socket. For wet locations. Use 75-150 watt maximum, Par-38 lamps. Includes gaskets and locknuts. UL Listed. Used to provide additional capacity. Die cast aluminum construction. Installation hardware, gasket, and ground screw provided. 9.5 cubic inch capacity. 4-1/2" x 2-3/4" x 1" deep. UL Listed, CSA, NEMA 3R Rated.
Legrand B-8 Metal Raceway Outside Elbow Bell Raco 5606 Lampholder Hubbell 5606 Adjustable Weatherproof Lampholder
Used to make a 90 degree outside turn around a corner. Die cast zinc with porcelain socket. For wet locations. Use 75-150 watt maximum, Par-38 lamps. Includes gaskets and locknuts. UL Listed. Die cast zinc with porcelain socket. For wet locations. Use 75-150 watt maximum, Par-38 lamps. Includes gaskets and locknuts. UL Listed.
Bell Raco 5320-2 Weatherproof Box Drain King 99 Faucet Adapter Moen 100429 Handle Adapter Kit
For use in wet, damp or dry locations. Three 1/2" threaded outlets. 2" deep with lugs. May be used as a weatherproof junction box, or as a housing for receptacles, switches, and GFCIs. Powder coat finish. Eight box mounting options with detachable lugs provided. Includes two closure plugs. Ground screw installed. Multi-lingual instructions. Internal threads and hubs comply with NEMA requirements. Hubs accept all threaded fittings and threaded conduit. Die cast aluminum construction. 18.3 cubic inch capacity. 2" depth x 4-1/2" length x 2-3/4" width. UL Listed. NEMA 3R rated. A plastic adapter to allow user to attach a garden hose to an indoor faucet. Threaded both male and female. Bagged.
Halex 93592 Ground Clamp Danco 10487 Faucet Aerators Halex 26141 Flat Drive Strap
Connects grounding wire to the grounding rod. 13/16"-27 male threads, watersense, removable/replaceable insert, twisting spray pattern protection. 1.5 gpm. Indoors or outdoors. To secure EMT conduit to a wood or masonry surface.
Halex 26151 1-Hole Snap-On Conduit Strap Halex 61130 1-Hole Conduit Strap Gardner Bender GSLU-25 Single Hole Mechanical Lug
Indoor or outdoor applications. To support EMT conduit. Steel, indoor or outdoor. Use to secure Rigid or IMC conduit to wood, masonry or similar surfaces where greater load bearing is required. Tray boxed. Rated for 600 volt copper only. Single hole lugs, easy to install with screwdriver, wrench or pliers. 3/8" bolt size.
Legrand B-6 Metal Raceway Flat Elbow Legrand B-7 Metal Raceway Inside Elbow Cordmate II Flex CM62 Split Flexible Tube
Used to make a 90 degree right or left turn on a flat surface. Used to make a 90 degree inside turn around a corner, from wall-to-wall or wall-to-ceiling. Split flexible tube allows easy cord insert and removal. Peel and press connector. Bridges loose cables running from components to on-wall channels. Easy installation, no tools required.
ADAPTER AERATOR DISHWASH CHRM Bell Raco 5611-0 Replacement Outer Gasket Halex 26152 1-Hole Snap-On Conduit Strap
Connects a female aerator to a female faucet. It has male threads on top and bottom. Chrome-plated brass for greater durability. Male 3/8-18 IPS x male 55/64-27. Offers a quick connection. Replacement gasket for Bell lampholders. UL Standard CSA Certified. Indoor or outdoor applications. To support EMT conduit.
Hubbell 5324-0 Outlet Box Jandorf 60766 Lug Terminal Jandorf 60767 Lug Terminal
With lugs. Die cast aluminum. For use in branch circuit wiring in wet, damp, or dry locations. May be used as a weatherproof junction box, or as housing for receptacles, switches, and GFCI's. Eight box mounting options with detachable lugs provided. Three threaded 3/4" outlets. Powder coat finish. 18.3 cubic inch capacity. Two closure plugs included. Ground screws installed. Internal threads and hubs comply with NEMA requirements. Hubs accept all threaded fittings and threaded conduit. 2" depth x 4-1/2" length x 2-3/4" width. UL Listed. Jandorf Lug Terminal, Series: 60766, 2 AWG Conductor, 1/2 in Stud, Non-Insulated Insulation, Tin Plated Copper, UL Listed Jandorf Lug Terminal, Series: 60767, 2 AWG Conductor, 3/8 in Stud, Non-Insulated Insulation, Tin Plated Copper, UL Listed
Jandorf 60772 Lug Terminal Jandorf 60773 Lug Terminal Mintcraft A0205 Faucet Handle Extenders
Jandorf Lug Terminal, Series: 60772, 1/0 AWG Conductor, 1/2 in Stud, Non-Insulated Insulation, Brown, Copper, UL Listed Jandorf Lug Terminal, Series: 60773, 1/0 AWG Conductor, 3/8 in Stud, Non-Insulated Insulation, Brown, Copper, UL Listed Plastic
DANCO 10481 Water Saving Faucet Aerator Halex 26161 2-Hole Snap-On Conduit Strap Danco 36169B Aerator Washers
Female thread, watersense, removable/replaceable insert, twisting spray pattern protection. 1.5 gpm, 55/64"-27F. To support EMT conduit where greater load bearing is required. Indoor or outdoor applications. Used between the end of a spout and an aerator. Bagged.
Hubbell 5321-0 Outlet Box Plumb Pak PP800-62LF Faucet Aerator Adapter PlumbPak PP28002 Dual Threaded Faucet Aerator
Constructed of die-cast aluminum. For use in branch circuit wiring in wet, damp or dry locations. May be used as a weatherproof junction box or as a housing for receptacles, switches, and GFCIs. Reinforced connector outlets. Powder coat finish. Eight box mounting options with detachable lugs provided. Two closure plugs included. Ground screw installed. Four 1/2" threaded outlets. Complies with NEMA requirements. Hubs accept all threaded fittings and threaded conduit. Multi-lingual instructions. 2" depth. 18.3 cubic inch capacity. 4-1/2" length x 2-3/4" width. UL Listed. NEMA 3R rated. Male to hose adapter. 15/16" - 27 inside thread on top, 55/64" - 27 outside thread on bottom. For Delta and American Standard faucets. 15/16" diameter. 27 outside male threads, 55/64" - 27 inside female threads. Chrome plated.
LUG CU HD 4AWG 5/16IN STUD SZ PlumbPak PP800-15 Faucet Aerator Danco 10519 Standard Aerator Adapter
Heavy-duty lugs made from pure copper for maximum current flow. Tinned for corrosion resistance. Seamless barrel for maximum strength. Closed ends seal out moisture. 15/16" Diameter. 3/4" - 27F x 55/64" - 27M. For Kohler and Price Pfister models.
Mintcraft A2014 Faucet Handle DANCO 88271 Dual Threaded Screw-On Faucet Aerator Bell Raco 5320-7 Weatherproof Outlet Box
For single control kitchen and bath faucets. Fits models 4111 and 4111P. Rubber. For use in wet, damp or dry locations. Three 1/2" threaded outlets. 2" deep with lugs. May be used as a weatherproof junction box, or as a housing for receptacles, switches, and GFCIs. Powder coat finish. Eight box mounting options with detachable lugs provided. Includes two closure plugs. Ground screw installed. Multi-lingual instructions. Internal threads and hubs comply with NEMA requirements. Hubs accept all threaded fittings and threaded conduit. Die cast aluminum construction. 18.3 cubic inch capacity. 2" depth x 4-1/2" length x 2-3/4" width. UL Listed. NEMA 3R rated.
Bell Raco 5320-5 Outlet Box Jandorf 60771 Lug Terminal Halex 26162 2-Hole Snap-On Conduit Strap
For use in wet, damp or dry locations. Three 1/2" threaded outlets. 2" deep with lugs. May be used as a weatherproof junction box, or as a housing for receptacles, switches, and GFCIs. Powder coat finish. Eight box mounting options with detachable lugs provided. Includes two closure plugs. Ground screw installed. Multi-lingual instructions. Internal threads and hubs comply with NEMA requirements. Hubs accept all threaded fittings and threaded conduit. Die cast aluminum construction. 18.3 cubic inch capacity. 2" depth x 4-1/2" length x 2-3/4" width. UL Listed. NEMA 3R rated. Jandorf Lug Terminal, Series: 60771, 8 AWG Conductor, 5/16 in Stud, Non-Insulated Insulation, Tin Plated Copper, UL Listed To support EMT conduit where greater load bearing is required. Indoor or outdoor applications.
CordMate Legrand C10 Wire Channel Danco 36108E Dishwasher Faucet Adapter Danco 89133 Aerator Washers
Hides and organizes low voltage loose cords and wires. UL Listed. 1/2" height x 3/8" width x 5' length. 15/16"-27M or 55/64"-27F. Used between the end of a spout and an aerator. Includes 15/16" No.36190 brass screen.
PlumbPak PP800-7 Flexible Faucet Aerator Plumb Pak PP800-61LF Faucet Aerator Adapter Jandorf 60770 Lug Terminal
Flexible rubber spray. Adjusts from spray to stream. Female adapter. 3/4" - 27 inside thread on top, 55/64" - 27 outside thread on bottom. Jandorf Lug Terminal, Series: 60770, 6 AWG Conductor, 3/8 in Stud, Non-Insulated Insulation, Tin Plated Copper, UL Listed
Danco 10525 Aerator Adapter Danco 10526 Aerator Adapter Jandorf 60768 Lug Terminal
55/64" - 27M x 55/64" - 27M 13/16" - 27F x 55/64" - 27M. Jandorf Lug Terminal, Series: 60768, 4 AWG Conductor, 1/2 in Stud, Non-Insulated Insulation, Tin Plated Copper, UL Listed
Halex 36019 Ground Clamp Jandorf 60774 Lug Terminal Jandorf 60775 Lug Terminal
Indoor or outdoor applications. Use to secure the grounding wire to a 1/2" through 1" pipe. UL Listed. Wire size fits #10 - #2 AWG. Jandorf Lug Terminal, Series: 60774, 2/0 AWG Conductor, 1/2 in Stud, Non-Insulated Insulation, Brown, Copper, UL Listed Jandorf Lug Terminal, Series: 60775, 2/0 AWG Conductor, 3/8 in Stud, Non-Insulated Insulation, Brown, Copper, UL Listed
Mintcraft A2045 Faucet Handle DANCO 10483 Water Saving Faucet Aerator Danco 36170B Aerator Washers
For double handle kitchen and bath faucets. Fits models 4631, 7141, 8631, 8631S. 15/16"-27 Male thread, watersense, removable/replaceable insert, twisting spray pattern protection. 1.5 gpm. Used between the end of a spout and an aerator. Bagged.
DANCO 10488 Water Saving Faucet Aerator DANCO 10489 Dual Threaded Water Saving Faucet Aerator DANCO 10512 Garden Hose Adapter
3/4"-27 female threads, watersense, removable/replaceable insert. Twisting spray pattern protection. 1.5 GPM. 15/16"-27M x 55/64"-27F dual thread, watersense. Removable/replaceable insert. Twisting spray pattern, slotted aerator. 1.5 GPM. Microban. 55/64"-27F x 3/4" GHTM low lead, aerator adapter for garden hose.
LUG CU HD 4AWG 3/8IN STUD SZ  DANCO 10477 Dual Threaded Water Saving Faucet Aerator DANCO 10478 Dual Threaded Water Saving Faucet Aerator
Heavy-duty lugs made from pure copper for maximum current flow. Tinned for corrosion resistance. Seamless barrel for maximum strength. Closed ends seal out moisture. Dual thread, watersense, removable/replaceable insert, twisting spray pattern force. 1.5 gpm. 15/16"-27M x 55/64"-27F Dual thread, watersense, removable/replaceable insert, twisting spray pattern force. 1.5 gpm. 15/16"-27M x 55/64"-27F
Bell Raco 5321-2 Weatherproof Box Bell Raco 5321-1 Weatherproof Box Halex 26142 Flat Drive Strap
Constructed of die-cast aluminum. For use in branch circuit wiring in wet, damp or dry locations. May be used as a weatherproof junction box or as a housing for receptacles, switches, and GFCIs. Reinforced connector outlets. Powder coat finish. Eight box mounting options with detachable lugs provided. Two closure plugs included. Ground screw installed. Four 1/2" threaded outlets. Complies with NEMA requirements. Hubs accept all threaded fittings and threaded conduit. Multi-lingual instructions. 2" depth. 18.3 cubic inch capacity. 4-1/2" length x 2-3/4" width. UL Listed. NEMA 3R rated. Constructed of die-cast aluminum. For use in branch circuit wiring in wet, damp or dry locations. May be used as a weatherproof junction box or as a housing for receptacles, switches, and GFCIs. Reinforced connector outlets. Powder coat finish. Eight box mounting options with detachable lugs provided. Two closure plugs included. Ground screw installed. Four 1/2" threaded outlets. Complies with NEMA requirements. Hubs accept all threaded fittings and threaded conduit. Multi-lingual instructions. 2" depth. 18.3 cubic inch capacity. 4-1/2" length x 2-3/4" width. UL Listed. NEMA 3R rated. Indoors or outdoors. To secure EMT conduit to a wood or masonry surface.
Danco 36171B Aerator Washers DANCO 10485 Dual Threaded Extra-Water Saving Faucet Aerator Eritech CWP1JU Grounding Pipe Clamp
Used between the end of a spout and an aerator. Bagged. 15/16"-27M X 55/64"-27F dual thread, watersaving, removable/replaceable insert, twisting spray pattern water force. Bolted water pipe clamps made from high-strength corrosion-resistant copper alloy. Connects grounding wire to the grounding rod. Range 10 solid - 2 stranded. UL Listed.
Legrand NMW17 Raceway Conduit Connector Gardner Bender GSLU-70 Single Hole Mechanical Lug Wiremold Raceway On-Wall Mount Conduit Connector
For transitioning from nonmetallic raceway to conduit. Hides and organizes loose cords and wires. Rated for 600 volt copper only. Single hole lugs, easy to install with screwdriver, wrench or pliers. 3/8" bolt size. For transitioning from nonmetallic raceway to conduit. Hides and organizes loose cords and wires.
Danco 10523 Faucet Aerator Adapter Carlon E977DC25-UPC Conduit Clamp Bell Raco 5322-0 Weatherproof Box
3/4"-27M x 3/4"-27M low lead, aerator adapter. Offers same chemical resistance as Carlon nonmetallic conduit for a complete, corrosion resistant system. UV resistant for use in direct sunlight. Use in accordance with conduit spacing requirements per NEC. Each clamp requires 2 screws, 2 nuts, and 2 washers. Gray clamps for standard conduit. Weatherproof box, with lugs. Five 1/2" threaded outlets. For use in branch circuit wiring in wet, damp or dry locations. May be used as a weatherproof junction box or as a housing for receptacles, switches and GFCIs. Die cast aluminum construction. Reinforced connector outlets. Powder coat finish. Eight box mounting options with detachable lugs provided. Two closure plugs included. Ground screw installed. Internal threads and hubs comply with NEMA requirements. Hubs accept all threaded fittings and threaded conduit. Multi-lingual instructions. 2" depth x 4-1/2" length x 2-3/4" width. 18.3 cubic inch capacity. UL Listed. CSA 22.2 No. 18 NEMA 3R Rated.
Thomas & Betts E977NDC-CTN 1-Piece Conduit Clamp Bell Raco 5321-5 Weatherproof Outlet Box Hubbell 5361-0 Splice Box
Drill  5/16'' hole with masonry bit and tap in with hammer. Constructed of die-cast aluminum. For use in branch circuit wiring in wet, damp or dry locations. May be used as a weatherproof junction box or as a housing for receptacles, switches, and GFCIs. Reinforced connector outlets. Powder coat finish. Eight box mounting options with detachable lugs provided. Two closure plugs included. Ground screw installed. Four 1/2" threaded outlets. Complies with NEMA requirements. Hubs accept all threaded fittings and threaded conduit. Multi-lingual instructions. 2" depth. 18.3 cubic inch capacity. 4-1/2" length x 2-3/4" width. UL Listed. NEMA 3R rated. For use in branch circuit wiring in wet, damp, or dry locations. Designed for use as a weatherproof junction box, and used with Bell round cluster covers and round lampholder combinations. Die cast aluminum construction. Powder coat finish. Reinforced connector outlets. Cast-in mounting lugs, four closure plugs included, and installed ground screw. 16.1 cubic inch capacity. Six 10-24 tapped holes. 4" diameter x 1-1/2" depth. UL Listed.
AERATOR FEMALE CHROME 1.2GPM  AERATOR FEMALE CHROME 1.2GPM  Danco 10520 Faucet Aerator Adapter
55/64? - 27, 1.2 GPM. 1.2 GPM 15/16"-27M x 55/64"-27M low lead aerator adapter.
Spot-Gro 5330-0 Weatherproof Box Bell Raco 5324-5 Outlet Box Thomas & Betts E977NEC-CTN 1-Piece Conduit Clamp
With lugs. Die cast aluminum. For use in branch circuit wiring in wet, damp, or dry locations. May be used as a weatherproof junction box, or as housing for receptacles, switches, and GFCI's. Eight box mounting options with detachable lugs provided. Powder coat finish. 16.5 cubic inch capacity. Two closure plugs included. Ground screw installed. Internal threads and hubs comply with NEMA requirements. Hubs accept all threaded fittings and threaded conduit. 2" depth x 4-1/2" length x 2-3/4" width. UL Listed. Shrink wrapped. With lugs. Die cast aluminum. For use in branch circuit wiring in wet, damp, or dry locations. May be used as a weatherproof junction box, or as housing for receptacles, switches, and GFCI's. Eight box mounting options with detachable lugs provided. Three threaded 3/4" outlets. Powder coat finish. 18.3 cubic inch capacity. Two closure plugs included. Ground screws installed. Internal threads and hubs comply with NEMA requirements. Hubs accept all threaded fittings and threaded conduit. 2" depth x 4-1/2" length x 2-3/4" width. UL Listed. Drill  5/16'' hole with masonry bit and tap in with hammer.
DANCO 10482 Water Saving Faucet Aerator Danco 10508 Aerator Adapter Jandorf 60776 Lug Terminal
Female thread, watersense, removable/replaceable insert, twisting spray pattern protection. 1.5 gpm, 55/64"-27F. 55/64" - 27M x 13/16"-27M. Jandorf Lug Terminal, Series: 60776, 3/0 AWG Conductor, 1/2 in Stud, Non-Insulated Insulation, Brown, Copper, UL Listed
Jandorf 60777 Lug Terminal Thomas & Betts E381DR Type T Weatherproof Switch Box Plumb Pak PP800-16 Faucet Aerator