Home > PLUMBING > KITCHEN & BATH > FIXTURES > BATHTUB WALL KITS
Sort By:
1
Halex 97521 Insulated Conduit Bushing Halex 97522 Insulated Conduit Bushing Halex 97525 Insulated Conduit Bushing
High impact thermoplastic. Flame retardant to 105 degrees C. Use with locknut to terminate threaded Rigid or IMC conduit to an outlet box. The rounded surface of the bushing prevents damage to wire insulation. Required by the NEC. UL Listed, CSA Approved. High impact thermoplastic. Flame retardant to 105 degrees C. Use with locknut to terminate threaded Rigid or IMC conduit to an outlet box. The rounded surface of the bushing prevents damage to wire insulation. Required by the NEC. UL Listed, CSA Approved. High impact thermoplastic. Flame retardant to 105 degrees C. Use with locknut to terminate threaded Rigid or IMC conduit to an outlet box. The rounded surface of the bushing prevents damage to wire insulation. Required by the NEC. UL Listed, CSA Approved.
Halex 96191 Rigid IMC Conduit Locknut Halex 96821 Rigid Reducing Conduit Washer Halex 97523 Insulated Conduit Bushing
Steel with zinc plating. Indoor or outdoor applications. Use to secure Rigid or IMC conduit or various threaded fittings to a steel outlet box or other metal enclosure. Use to reduce the size of the conduit hole knockout opening in a steel outlet box or other metal enclosure. Must use one inside the enclosure opening and one on the outside. UL Listed, CSA Approved. High impact thermoplastic. Flame retardant to 105 degrees C. Use with locknut to terminate threaded Rigid or IMC conduit to an outlet box. The rounded surface of the bushing prevents damage to wire insulation. Required by the NEC. UL Listed, CSA Approved.
Halex 96071 Knock Out Seals Halex 96831 Rigid Reducing Conduit Washer Halex 96832 Rigid Reducing Conduit Washer
Use to cover exposed knock-out holes in steel outlet boxes and other metal enclosures. Use to reduce the size of the conduit hole knockout opening in a steel outlet box or other metal enclosure. Must use one inside the enclosure opening and one on the outside. UL Listed, CSA Approved. Use to reduce the size of the conduit hole knockout opening in a steel outlet box or other metal enclosure. Must use one inside the enclosure opening and one on the outside. UL Listed, CSA Approved.
Halex 96072 Knock Out Seals Halex 96192 Rigid IMC Conduit Locknut Halex 26190 Conduit Locknut
Use to cover exposed knock-out holes in steel outlet boxes and other metal enclosures. Steel with zinc plating. Indoor or outdoor applications. Use to secure Rigid or IMC conduit or various threaded fittings to a steel outlet box or other metal enclosure. Halex Conduit Locknut, 1/2 in Nominal, Steel, Zinc Plated, CSA Certified, UL Listed, For use to secure rigid, imc conduit or various threaded fittings to a steel outlet box or other metal enclosure, indoor/outdoor
Halex 97524 Insulated Conduit Bushing Halex 96193 Rigid Conduit Locknut Halex 96843 Rigid Reducing Conduit Washer
High impact thermoplastic. Flame retardant to 105 degrees C. Use with locknut to terminate threaded Rigid or IMC conduit to an outlet box. The rounded surface of the bushing prevents damage to wire insulation. Required by the NEC. UL Listed, CSA Approved. Steel with zinc plating. Indoor or outdoor applications. Use to secure Rigid or IMC conduit or various threaded fittings to a steel outlet box or other metal enclosure. Use to reduce the size of the conduit hole knockout opening in a steel outlet box or other metal enclosure. Must use one inside the enclosure opening and one on the outside. UL Listed, CSA Approved.
WASHER RDUCNG RGD 1-1/4X1/2IN WASHER RDUCNG RGD 1-1/4X3/4IN Halex 96194 Rigid IMC Conduit Locknut
Use to reduce the size of the conduit hole knockout opening in a steel outlet box or other metal enclosure. Must use one inside the enclosure opening and one on the outside. UL Listed, CSA Approved. Use to reduce the size of the conduit hole knockout opening in a steel outlet box or other metal enclosure. Must use one inside the enclosure opening and one on the outside. UL Listed, CSA Approved. Steel with zinc plating. Indoor or outdoor applications. Use to secure Rigid or IMC conduit or various threaded fittings to a steel outlet box or other metal enclosure.
WASHER RDUCNG RGD 1-1/2X1/2IN WASHER RDUCING RGD 1-1/2X3/4IN Halex 96195 Rigid Conduit Locknut
Use to reduce the size of the conduit hole knockout opening in a steel outlet box or other metal enclosure. Must use one inside the enclosure opening and one on the outside. UL Listed, CSA Approved. Use to reduce the size of the conduit hole knockout opening in a steel outlet box or other metal enclosure. Must use one inside the enclosure opening and one on the outside. UL Listed, CSA Approved. Steel with zinc plating. Indoor or outdoor applications. Use to secure Rigid or IMC conduit or various threaded fittings to a steel outlet box or other metal enclosure.
Bell Raco 5173-2 Blank Weatherproof Device Cover Bell Raco 5173-1 Blank Weatherproof Device Cover Halex 26071 Knock Out Seals
Outdoor use, rugged metallic construction. Powder coat finish. Scratch resistant. Includes installation hardware, gasket, and multi-lingual instructions. C/UL/US UL Listed. NEMA 3R rated. Outdoor use, rugged metallic construction. Powder coat finish. Scratch resistant. Includes installation hardware, gasket, and multi-lingual instructions. C/UL/US UL Listed. NEMA 3R rated. Use to cover exposed knock-out holes in steel outlet boxes and other metal enclosures.
Halex 97526 Insulated Conduit Bushing Bell Raco 5173-7 Blank Weatherproof Device Cover Hubbell 5173-5 Blank Weatherproof Cover
High impact thermoplastic. Flame retardant to 105 degrees C. Use with locknut to terminate threaded Rigid or IMC conduit to an outlet box. The rounded surface of the bushing prevents damage to wire insulation. Required by the NEC. UL Listed, CSA Approved. Outdoor use, rugged metallic construction. Powder coat finish. Scratch resistant. Includes installation hardware, gasket, and multi-lingual instructions. C/UL/US UL Listed. NEMA 3R rated. Outdoor use, rugged metallic construction. Powder coat finish. Scratch resistant. Includes installation hardware, gasket, and multi-lingual instructions. C/UL/US UL Listed. NEMA 3R rated.
Hubbell 5173-6 Blank Weatherproof Cover Bell 5019-0 Replacement Rectangular Multipurpose Gasket Halex 96196 Rigid IMC Conduit Locknut
Outdoor use, rugged metallic construction. Powder coat finish. Scratch resistant. Includes installation hardware, gasket, and multi-lingual instructions. C/UL/US UL Listed. NEMA 3R rated. Rectangular replacement gaskets for weatherproof covers and lamp holders. Each gasket has cut outs for a toggle switch, duplex receptacle and 1.406" diameter round receptacle. Remove the cut outs for the duplex and round receptacles for a GFCI receptacle opening. Steel with zinc plating. Indoor or outdoor applications. Use to secure Rigid or IMC conduit or various threaded fittings to a steel outlet box or other metal enclosure.
Halex 75225 Insulated Conduit Bushing Halex 01925B IMC Conduit Locknut Hubbell 5374-0 Blank Round Flat Weatherproof Cover
High impact thermoplastic. Flame retardant to 105 degrees C. Use with locknut to terminate threaded Rigid or IMC conduit to an outlet box. The rounded surface of the bushing prevents damage to wire insulation. Required by the NEC. UL Listed, CSA Approved. Use to secure Rigid or IMC conduit or various threaded fittings to a steel outlet box or other metal enclosure. Bulk packed. For use with 4" round splice boxes. Installation hardware, and gasket included. 4" diameter, shrink wrapped. UL Listed.
Halex 90661 Standard Water-Tight Connector Bell Raco 5175-1 Blank Weatherproof Device Cover Halex 75230 Insulated Conduit Bushing
Die cast of high strength zinc alloy. Use to secure SE/SEU cable to a metal enclosure. Use to connect UF cable to a waterproof box with a threaded hub. For use whenever weatherproof protection is required for a weatherproof box. Rugged die cast construction. Powder coat finish provides scratch resistance. Includes gasket and mounting hardware. Multi-lingual instructions in each package. UL Listed, NEMA 3R Rated. 4-1/2" x 4-1/2". High impact thermoplastic. Flame retardant to 105 degrees C. Use with locknut to terminate threaded Rigid or IMC conduit to an outlet box. The rounded surface of the bushing prevents damage to wire insulation. Required by the NEC. UL Listed, CSA Approved.
Halex 90662 Standard Water-Tight Connector Halex 26073 Knock Out Seals Arrow Hart S2962 Weatherproof Cover
Die cast of high strength zinc alloy. Use to secure SE/SEU cable to a metal enclosure. Use to connect UF cable to a waterproof box with a threaded hub. Use to cover exposed knock-out holes in steel outlet boxes and other metal enclosures. Tough plastic construction, resistant to high impact and sunlight. Non-corrosive and non-conductive. Gasket provided seals both device openings and edges. Self closing cover. Vertical only. UL Listed for wet locations with cover closed.
Hubbell 5175-5 Blank Weatherproof Cover Hubbell 5180-0 Weatherproof Device Cover Halex 64405 Conduit Elbow
For use whenever weatherproof protection is required for a weatherproof box. Rugged die cast construction. Powder coat finish provides scratch resistance. Includes gasket and mounting hardware. Multi-lingual instructions in each package. UL Listed, NEMA 3R Rated. 4-1/2" x 4-1/2". Horizontal device mount. Weatherproof covers for protection of outdoor receptacles. State-of-the-art powder coat finish provides maximum weatherability and scratch resistance. Self-closing lids assure weatherproof protection when the receptacle is not in use. Includes installation hardware, gasket, and multi-lingual instructions. Size: 4-1/2" x 2-3/4". UL 514-A listed, File E195978 CSA C22.2 No. 18 NEMA 3R Rated. To connect EMT conduit together to allow for 90 degree bends. UL Approved.
Hubbell 5180-6 Weatherproof Device Cover LOCK NUT SEALER 1/2IN         Bell Raco 5175-0 Blank Weatherproof Device Cover
LOCK NUT SEALER 1/2IN
Our Price: $3.36
Horizontal device mount. Weatherproof covers for protection of outdoor receptacles. State-of-the-art powder coat finish provides maximum weatherability and scratch resistance. Self-closing lids assure weatherproof protection when the receptacle is not in use. Includes installation hardware, gasket, and multi-lingual instructions. Size: 4-1/2" x 2-3/4". UL 514-A listed, File E195978 CSA C22.2 No. 18 NEMA 3R Rated. Secures rigid or IMC conduit, or threaded fittings to steel outlet boxes or other steel boxes where moisture proofing is needed. Steel with zinc plating, pre-molded seal on one side. For use whenever weatherproof protection is required for a weatherproof box. Rugged die cast construction. Powder coat finish provides scratch resistance. Includes gasket and mounting hardware. Multi-lingual instructions in each package. UL Listed, NEMA 3R Rated. 4-1/2" x 4-1/2".
Halex 26074 Knock Out Seals WASHER REDUCING 2X1IN         WASHER REDUCING 2X1-1/4IN
WASHER REDUCING 2X1IN
Our Price: $3.60
Use to cover exposed knock-out holes in steel outlet boxes and other metal enclosures. Use to reduce the size of the conduit hole knockout opening in a steel outlet box or other metal enclosure. Must use one inside the enclosure opening and one on the outside. UL Listed, CSA Approved. Use to reduce the size of the conduit hole knockout opening in a steel outlet box or other metal enclosure. Must use one inside the enclosure opening and one on the outside. UL Listed, CSA Approved.
Halex 07310 Compression Standard Water-Tight Connector Bell Raco 5180-1 2-Hole Weatherproof Device Cover Bell Raco 5180-2 2-Hole Weatherproof Device Cover
Die cast of high strength zinc alloy. Use to secure SE/SEU cable to a metal enclosure. Use to connect UF cable to a waterproof box with a threaded hub. Horizontal device mount. Weatherproof covers for protection of outdoor receptacles. State-of-the-art powder coat finish provides maximum weatherability and scratch resistance. Self-closing lids assure weatherproof protection when the receptacle is not in use. Includes installation hardware, gasket, and multi-lingual instructions. Size: 4-1/2" x 2-3/4". UL 514-A listed, File E195978 CSA C22.2 No. 18 NEMA 3R Rated. Horizontal device mount. Weatherproof covers for protection of outdoor receptacles. State-of-the-art powder coat finish provides maximum weatherability and scratch resistance. Self-closing lids assure weatherproof protection when the receptacle is not in use. Includes installation hardware, gasket, and multi-lingual instructions. Size: 4-1/2" x 2-3/4". UL 514-A listed, File E195978 CSA C22.2 No. 18 NEMA 3R Rated.
Hubbell 5180-5 Weatherproof Device Cover Bell Raco 5180-7 2-Hole Weatherproof Device Cover Halex 26075 Knock Out Seals
Horizontal device mount. Weatherproof covers for protection of outdoor receptacles. State-of-the-art powder coat finish provides maximum weatherability and scratch resistance. Self-closing lids assure weatherproof protection when the receptacle is not in use. Includes installation hardware, gasket, and multi-lingual instructions. Size: 4-1/2" x 2-3/4". UL 514-A listed, File E195978 CSA C22.2 No. 18 NEMA 3R Rated. Horizontal device mount. Weatherproof covers for protection of outdoor receptacles. State-of-the-art powder coat finish provides maximum weatherability and scratch resistance. Self-closing lids assure weatherproof protection when the receptacle is not in use. Includes installation hardware, gasket, and multi-lingual instructions. Size: 4-1/2" x 2-3/4". UL 514-A listed, File E195978 CSA C22.2 No. 18 NEMA 3R Rated. Use to cover exposed knock-out holes in steel outlet boxes and other metal enclosures.
Bell Raco 5152-0 Weatherproof Device Cover Halex 64505 Conduit Elbow Hubbell 5155-5 Single Device Cover
State-of-the-art powder coat finish provides maximum weatherability and scratch resistance. Self-closing lids assure weatherproof protection when the receptacle is not in use. Installation hardware, gasket, multi-lingual instructions included. For single 1.406" diameter receptacle. UL Listed for wet location with cover closed. To connect EMT conduit together to allow for 45 degree bends. With powder coat finish for weatherability and scratch resistance. For use whenever weatherproof protection is required for an outdoor receptacle. Self-closing lid for weatherproof protection when the receptacle is not in use. Includes installation hardware, gasket, and multi-lingual instructions. Size: 4-1/2" length x 2-3/4" width x 1.406" depth. UL Listed, Meets Standard 514A, C22.2 No. 18, (5103 series) NEMA 3R rated.
Halex 64507 Conduit Elbow Bell Raco 5155-6 Round Opening Weatherproof Device Cover Halex 58005 Standard Weatherhead Service Entrance Cap
To connect EMT conduit together to allow for 45 degree bends. With powder coat finish for weatherability and scratch resistance. For use whenever weatherproof protection is required for an outdoor receptacle. Self-closing lid for weatherproof protection when the receptacle is not in use. Includes installation hardware, gasket, and multi-lingual instructions. Size: 4-1/2" length x 2-3/4" width x 1.406" depth. UL Listed, Meets Standard 514A, C22.2 No. 18, (5103 series) NEMA 3R rated. Aluminum die cast. Indoor or outdoor applications. Use in an overhead service entrance. Mounts on top of EMT, Rigid or IMC conduit. Serves as a connecting point for the service entrance wires. UL Listed meets CSA requirements. Tray boxed.
Arrow Hart S1962W-SP Weatherproof Cover Arrow Hart S1961 Weatherproof Cover Arrow Hart S1962 Utility Halogen Low Profile Weatherproof Cover
Tough plastic construction, resistant to high impact and sunlight. Non-metallic, non-corrosive and non-conductive. Gasket provided seals both device openings and edges. UL Listed for damp locations. Stay open lids. Size 2-3/4" x 4-1/2". Resistant to high impact and sunlight. Non-metallic, non-corrosive and non-conductive. Gasket provided seals both device openings and edges. Lid stays open in use. UL Listed for damp locations. Tough plastic construction, resistant to high impact and sunlight. Non-metallic, non-corrosive and non-conductive. Gasket provided seals both device openings and edges. UL Listed for damp locations. Stay open lids. Size 2-3/4" x 4-1/2".
Halex 61820B IMC Sealer Locknut Arrow Hart S1961W-SP Weatherproof Cover Carlon E995GR Meter Offset
Secures rigid or IMC conduit, or threaded fittings to steel outlet boxes or other steel boxes where moisture proofing is needed. Steel with zinc plating, pre-molded seal on one side. Resistant to high impact and sunlight. Non-metallic, non-corrosive and non-conductive. Gasket provided seals both device openings and edges. Lid stays open in use. UL Listed for damp locations. For installation from Schedule 40/80 non-metallic conduit runs into meter box. Will not rust or corrode.
Gardner Bender RTL-108 Replacement Medium Test Lead Halex 58007 Clamp On Weatherhead Service Entrance Cap Carlon E998E-CAR Service Entrance Cap
Replacement leads for Gardner Bender meters GMT-12A, GMT-18A. UL recognized. Tough ABS Plastic. Flexible cords for easy use. Aluminum die cast. Indoor or outdoor applications. Use in an overhead service entrance. Mounts on top of EMT, Rigid or IMC conduit. Serves as a connecting point for the service entrance wires. UL Listed meets CSA requirements. Tray boxed. Safe, non-conductive. To bring overhead wiring from outside into conduit run. Will not rust or corrode. For use with Schedule 40/80 non-metallic solvent weld fittings.
Carlon E995J-CTN Meter Offset Halex 64407 Conduit Elbow Halex 60416 Light Duty Wire Holder
For installation from Schedule 40/80 non-metallic conduit runs into meter box. Will not rust or corrode. To connect EMT conduit together to allow for 90 degree bends. UL Approved. Used indoors or outdoors to secure incoming service entrance wires. Reinforced. Porcelain and steel. Tray box.
Bell Raco 5103-0 1-Hole Weatherproof Device Cover Bell Raco 5103-1 1-Hole Weatherproof Device Cover Bell Raco 5103-2 1-Hole Weatherproof Device Cover
GFCI VERT 1G COVER GRAY
Our Price: $4.88
Includes installation hardware, gasket, and multi-lingual instructions. Weatherproof protection for outdoor receptacle. Powder coat finish for weather. Scratch resistance. Self-closing lid protects receptacle when not in use. C/UL/US NEMA 3R rated. Shrink wrapped. Includes installation hardware, gasket, and multi-lingual instructions. Weatherproof protection for outdoor receptacle. Powder coat finish for weather. Scratch resistance. Self-closing lid protects receptacle when not in use. C/UL/US NEMA 3R rated. Shrink wrapped. Includes installation hardware, gasket, and multi-lingual instructions. Weatherproof protection for outdoor receptacle. Powder coat finish for weather. Scratch resistance. Self-closing lid protects receptacle when not in use. C/UL/US NEMA 3R rated. Shrink wrapped.
Carlon E98TSCN-CAR Weatherproof Device Cover Bell Raco 5146-0 1-Hole Weatherproof Device Cover Halex 26076 Knock Out Seals
Weatherproof cover for single toggle switch applications. Vertical mount. UV resistant, suitable for outdoor use. Nonmetallic/noncorrosive, won't rust or fade, paintable. UL Marine Listed, CSA Certified. Waterproof protection for outside receptacle. Metallic construction, powder coat finish. Scratch resistant. Self-closing lid when not in use. Includes installation hardware, gasket, and multi-lingual instructions.  4-1/2" length x 2-3/4" width. C/UL/US UL 514-A listed, File E195978 (5132-5146) CSA C22.2 No. 18 (5132-5146) NEMA 3R rated. Use to cover exposed knock-out holes in steel outlet boxes and other metal enclosures.
Carlon E998F-CAR Standard Weatherhead Service Entrance Cap Halex 08212B Compression Standard Water-Tight Connector Carlon E98DHGN-CAR Weatherproof Cover
Safe, non-conductive. To bring overhead wiring from outside into conduit run. Will not rust or corrode. For use with Schedule 40/80 non-metallic solvent weld fittings. Die cast of high strength zinc alloy. Use to secure SE/SEU cable to a metal enclosure. Use to connect UF cable to a waterproof box with a threaded hub. Non-conductive, corrosion resistant, and paintable for safe installation and operation in wet or damp locations. NEMA 3R rated and UL Listed.
Hubbell 5101-6 Weatherproof Device Cover Hubbell 5121-5 Weatherproof Device Cover Carlon E998G-CAR Service Entrance Cap
For outdoor horizontal use. Powder coat finish. Scratch resistant. Self-closing lid assures protection when receptacle is not in use. Includes installation hardware, gasket, and multi-lingual instructions. UL 514-A listed, File E 195978 C/UL CSA C22.2 No. 18  NEMA 3R rated. For use whenever weatherproof protection is required for an "on/off" type switch. Powder coat finish. Supplied with a switch unassembled to the cover - no need to purchase separate components. Includes installation hardware and multi-lingual instructions. Size 4-1/2" length x 2-3/4" width. UL Listed, CSA, NEMA 3R Rated. Safe, non-conductive. To bring overhead wiring from outside into conduit run. Will not rust or corrode. For use with Schedule 40/80 non-metallic solvent weld fittings.
Bell Raco 5146-5 Weatherproof Device Cover Halex 95212B Insulated Metallic Grounding Conduit Bushing with Lug Bell Raco 5101-2 1-Hole Weatherproof Device Cover
Waterproof protection for outside receptacle. Metallic construction, powder coat finish. Scratch resistant. Self-closing lid when not in use. Includes installation hardware, gasket, and multi-lingual instructions.  4-1/2" length x 2-3/4" width. C/UL/US UL 514-A listed, File E195978 (5132-5146) CSA C22.2 No. 18 (5132-5146) NEMA 3R rated. Zinc die cast. Rounded surface prevents damage to insulation. Thermoplastic liner rated at 150 degree F. Indoor or outdoor use. Use with locknut to terminate service conduit to a cabinet. Lug provided for bonding jumper to a neutral bus bar. UL Listed, CSA Approved. For outdoor horizontal use. Powder coat finish. Scratch resistant. Self-closing lid assures protection when receptacle is not in use. Includes installation hardware, gasket, and multi-lingual instructions. UL 514-A listed, File E 195978 C/UL CSA C22.2 No. 18  NEMA 3R rated.
Bell Raco 5101-1 1-Hole Weatherproof Device Cover Bell Raco 5101-0 1-Hole Weatherproof Device Cover Bell Raco 5121-1 Weatherproof Switch Cover
For outdoor horizontal use. Powder coat finish. Scratch resistant. Self-closing lid assures protection when receptacle is not in use. Includes installation hardware, gasket, and multi-lingual instructions. UL 514-A listed, File E 195978 C/UL CSA C22.2 No. 18  NEMA 3R rated. For outdoor horizontal use. Powder coat finish. Scratch resistant. Self-closing lid assures protection when receptacle is not in use. Includes installation hardware, gasket, and multi-lingual instructions. UL 514-A listed, File E 195978 C/UL CSA C22.2 No. 18  NEMA 3R rated. For use whenever weatherproof protection is required for an "on/off" type switch. Powder coat finish. Supplied with a switch unassembled to the cover - no need to purchase separate components. Includes installation hardware and multi-lingual instructions. Size 4-1/2" length x 2-3/4" width. UL Listed, CSA, NEMA 3R Rated.
Hubbell 5101-5 Weatherproof Device Cover Bell Raco 5101-7 1-Hole Weatherproof Device Cover Carlon E98GFCN-CAR Weatherproof Device Cover
For outdoor horizontal use. Powder coat finish. Scratch resistant. Self-closing lid assures protection when receptacle is not in use. Includes installation hardware, gasket, and multi-lingual instructions. UL 514-A listed, File E 195978 C/UL CSA C22.2 No. 18  NEMA 3R rated. For outdoor horizontal use. Powder coat finish. Scratch resistant. Self-closing lid assures protection when receptacle is not in use. Includes installation hardware, gasket, and multi-lingual instructions. UL 514-A listed, File E 195978 C/UL CSA C22.2 No. 18  NEMA 3R rated. Non-conductive, corrosion resistant, and paintable for safe installation and operation in wet or damp locations. NEMA 3R rated and UL Listed. 2.63" high x 1.31" wide opening.
Carlon E98SSCN-CAR Weatherproof Cover Carlon E98GDRN-CAR Weatherproof Device Cover Carlon E98G5FN-CAR Weatherproof Cover
Non-conductive. Suitable for wet locations. Gaskets and screws included. UL Listed. Non-conductive, corrosion resistant, and paintable for safe installation and operation in wet or damp locations. NEMA 3R rated and UL Listed. For 50 amp twist lock single receptacles under 2.250" diameter. For exposed applications. Will not rust or corrode. Gaskets and screws included. UL Listed.
Wire-Aide 79-006N Non-Toxic Wire Pulling Lubricant Halex 58010 Clamp On Weatherhead Service Entrance Cap Arrow Hart S3966W-SP Decorative Weatherproof Cover
Heavy cream-like paste. Slides on smoothly and clings throughout the pull. Excellent abrasion protection and cling ability, repels water to some extent. Modified wax base formula dries to a slippery film. Greaseless, non-toxic, will not stain skin, clothing or construction trim; cleans up with soap and hot water. Withstands normal temperature extremes and will not dry out in the container. Remains stable with 3 freeze-thaw cycles. Non-combustible, non-conductive and non-corrosive. Will not damage conduit or insulation. Suitable for fiber-optic wire. Yellow color. In a squeeze bottle. UL Listed. Aluminum die cast. Indoor or outdoor applications. Use in an overhead service entrance. Mounts on top of EMT, Rigid or IMC conduit. Serves as a connecting point for the service entrance wires. UL Listed meets CSA requirements. Tray boxed. For GFCI/Decorator receptacle used in wet locations. Gaskets provided to seal cover edges as well as device openings. Stainless steel mounting screws included. Horizontal flush or surface mount. UL Listed.
Halex 64410 Conduit Elbow Arrow Hart S2966W-SP Decorative Weatherproof Cover Arrow Hart S2966 Decorative Weatherproof Cover
To connect EMT conduit together to allow for 90 degree bends. UL Approved. Plastic, impact and sunlight resistant. Gaskets provided to seal cover edges as well as device openings. Self closing cover. Stainless steel mounting screws furnished. Vertical, flush or surface mount. UL Listed. Plastic, impact and sunlight resistant. Gaskets provided to seal cover edges as well as device openings. Self closing cover. Stainless steel mounting screws furnished. Vertical, flush or surface mount. UL Listed.
Arrow Hart S3966 Decorative Weatherproof Cover RECPTCL/CVR DPLX HRZ WP GRY 1G Carlon E98SRCN-CAR Weatherproof Cover
For GFCI/Decorator receptacle used in wet locations. Gaskets provided to seal cover edges as well as device openings. Stainless steel mounting screws included. Horizontal flush or surface mount. UL Listed. Used where weatherproof protection is required for an outdoor receptacle. Self-closing lids. Powder coat finish. Size 4-1/2" width x 2-3/4" length. Includes gasket and mounting hardware. UL Listed, NEMA 3R Rated. For 15 amp or other single receptacles under 1.375" diameter. Non-conductive, corrosion resistant, and paintable for safe installation and operation in wet or damp locations. NEMA 3R rated and UL Listed.
BUSHING GRND MTL INSUL 1-1/4IN Bell Raco 5141-0 Weatherproof Switch Cover Carlon E998H-CAR Standard Weatherhead Service Entrance Cap
Zinc die cast. Rounded surface prevents damage to insulation. Thermoplastic liner rated at 150 degree F. Indoor or outdoor use. Use with locknut to terminate service conduit to a cabinet. Lug provided for bonding jumper to a neutral bus bar. UL Listed, CSA Approved. Weatherproof protection for an "on-off" type switch. Vertical, mounted to device. Rugged die cast construction, powder coat finish. Self-closing lid assures weatherproof protection when not in use. Supplied with a switch - no need to purchase separate components. Switch is unassembled to the cover. UL, CSA and NEMA 3R rated. Shrink wrapped. Safe, non-conductive. To bring overhead wiring from outside into conduit run. Will not rust or corrode. For use with Schedule 40/80 non-metallic solvent weld fittings.
GE TC100P Rainproof Conduit Hub GE TC125P Rainproof Conduit Hub GE TC150P Rainproof Conduit Hub
For outdoor enclosures with removable closing caps. For outdoor enclosures with removable closing caps. For outdoor enclosures with removable closing caps.
GE TC200P Rainproof Conduit Hub Siemens EC38599 Type RX Conduit Hub Siemens EC38597 Type RX Conduit Hub
For outdoor enclosures with removable closing caps. For use on all Siemans and Murry single position meter sockets. For use on all Siemans and Murry single position meter sockets.
Siemens EC38598 Type RX Conduit Hub Halex 58012 Clamp On Weatherhead Service Entrance Cap Halex 99526 Insulated Metallic Grounding Conduit Bushing with Lug
For use on all Siemans and Murry single position meter sockets. Aluminum die cast. Indoor or outdoor applications. Use in an overhead service entrance. Mounts on top of EMT, Rigid or IMC conduit. Serves as a connecting point for the service entrance wires. UL Listed meets CSA requirements. Tray boxed. Zinc die cast. Rounded surface prevents damage to insulation. Thermoplastic liner rated at 150 degree F. Indoor or outdoor use. Use with locknut to terminate service conduit to a cabinet. Lug provided for bonding jumper to a neutral bus bar. UL Listed, CSA Approved.
Arrow Hart S992 Weatherproof Cover Halex 57499 Oval Standard Service Cable Cap IMC Bell Raco 5141-5 3-Way Weatherproof Cover
For single devices, take either single receptacle or switch. Corrosion resistant materials suitable for exposure to weather. Gaskets provided to seal cover edges and openings. Mount on flush or surface single gang boxes. Gray color. UL Listed. Polybagged. Copper-free aluminum die cast. Indoor or outdoor applications. Use in overhead services that utilize SEU cable. Tray boxed. For use whenever weatherproof protection is required for an "on/off" type switch. Powder coat finish. Supplied with a switch unassembled to the cover - no need to purchase separate components. Includes installation hardware and multi-lingual instructions. Size 4-1/2" length x 2-3/4" width. UL Listed, CSA, NEMA 3R Rated.
GB-Gardner Bender SK-632T Electrician Screw Kits Carlon E9G2SSNR Weatherproof Cover Carlon Code Keeper Red Dot CKNM-NG Weatherproof Cover
Contains assorted sizes and lengths of commonly used electrical screws. Screws are #6 - 32, ranging from 3/4" to 3" in length. Weather resistant cover for double toggle switch applications. Vertical mount. UV resistant, suitable for outdoor use. Nonmetallic/noncorrosive, won't rust or fade, paintable. UL Marine Listed, CSA Certified. Accepts GFCI, duplex, switch and up to 1-3/8" round devices. Nonconductive, noncorrosive, and impact resistant. Won't rust or fade. Scratch resistant. For use in wet/damp locations. Keyhole mounts, loosen the existing device screws and slide the cover over. Comes with adapter plates and pre-adhered gaskets. Wasp guard included to keep out unwanted pests. Lockable for security. UL Listed.
Arrow Hart S989-SP Weatherproof Cover GB SK-832T Electrician's Screw Kit Halex 60222 Wire Holder
Corrosion resistant materials suitable for exposure to weather. Gaskets provided to seal cover edges and openings. Corrosion resistant mounting screws included. Mount on flush or surface single gang boxes. UL Listed. GB Screw Kit, Electrician's, 120 Pieces, Includes: (20) 2/3 in, (20) 7/8 in, (20) 1 in, (20) 1-1/4 in, (20) 1-5/8 in and  (20) 2 in  Phillips Head Screws, NO 8-32 Phillips Round Head, For Switches, Receptacles and Outlet Applications Used indoors or outdoors to secure incoming service entrance wires. Reinforced. Porcelain and steel. Tray box.
Halex 95215B Insulated Metallic Grounding Conduit Bushing with Lug Halex 64412 Conduit Elbow Bell Rayntite 5034-0 Weatherproof Device Cover
Zinc die cast. Rounded surface prevents damage to insulation. Thermoplastic liner rated at 150 degree F. Indoor or outdoor use. Use with locknut to terminate service conduit to a cabinet. Lug provided for bonding jumper to a neutral bus bar. UL Listed, CSA Approved. To connect EMT conduit together to allow for 90 degree bends. UL Approved. For weatherproof 30-50 amp receptacles and wet locations. 2.625" diameter. Die cast aluminum construction, powder coat finish. Scratch resistant. Self-closing lid assures protection when the receptacle is not in use. Padlockable. May be mounted to box or device. Includes installation hardware, gasket, and multi-lingual instructions. UL listed 514-A , File E 195978 CSA C22.2 No. 18 NEMA 3R rated. Shrink wrapped.
Halex 95220B Insulated Metallic Grounding Conduit Bushing with Lug Siemens ECHS125 Type HS Conduit Hub LOCK NUT SEALER 2IN
LOCK NUT SEALER 2IN
Our Price: $8.40
Zinc die cast. Rounded surface prevents damage to insulation. Thermoplastic liner rated at 150 degree F. Indoor or outdoor use. Use with locknut to terminate service conduit to a cabinet. Lug provided for bonding jumper to a neutral bus bar. UL Listed, CSA Approved. For use on all Siemens loadcenters, main lug, main breaker and meter socket; plus enclosed circuit breakers Nos. WB2225, WB3225. Secures rigid or IMC conduit, or threaded fittings to steel outlet boxes or other steel boxes where moisture proofing is needed. Steel with zinc plating, pre-molded seal on one side.
Siemens ECHS150 Type HS Conduit Hub HUB METER SKT TYPE RX 2-1/2IN Eaton DS125H1P Rainproof Conduit Hub
For use on all Siemens loadcenters, main lug, main breaker and meter socket; plus enclosed circuit breakers Nos. WB2225, WB3225. For use on all Siemans and Murry single position meter sockets. For use with MLO and MCB loadcenters and circuit breaker enclosures.
Eaton DS150H1P Rainproof Conduit Hub Hubbell 5148-5 Weatherproof Device Cover Eaton ARP00004CH12 Type A Hub Closure Plate
For use with MLO and MCB loadcenters and circuit breaker enclosures. Waterproof protection for outside receptacle. Self-closing lids. Installation hardware, gasket, and multi-lingual instructions included. Size: 4-1/2" width x 4-1/2" length. C/UL/US UL 514-A listed, CSA and NEMA 3R rated. For use on Cutler Hammer meter sockets.
Eaton ARP00005CH15 Type A Hub Closure Plate Halex 58015 Clamp On Weatherhead Service Entrance Cap Halex 29523 Insulated Metallic Grounding Conduit Bushing with Lug
For use on Cutler Hammer meter sockets. Aluminum die cast. Indoor or outdoor applications. Use in an overhead service entrance. Mounts on top of EMT, Rigid or IMC conduit. Serves as a connecting point for the service entrance wires. UL Listed meets CSA requirements. Tray boxed. Zinc die cast. Rounded surface prevents damage to insulation. Thermoplastic liner rated at 150 degree F. Indoor or outdoor use. Use with locknut to terminate service conduit to a cabinet. Lug provided for bonding jumper to a neutral bus bar. UL Listed, CSA Approved.
Bell Rayntite 5030-0 Weatherproof Cover Smart 3002 Bulb Changer Kit Bell Raco 5148-0 Weatherproof Device Cover
For 30-50 amp receptacles, 2.150" diameter. Die cast aluminum construction, powder coat finish. Scratch resistant. Self-closing lid assures protection when not in use. Padlockable. May be mounted to box or device. Includes installation hardware, gasket, and multi-lingual instructions. UL listed NEMA 3R rated. Smart bulb changers attach to an extension pole and allow the user to remove and replace bulbs quickly and easily, while standing safely on the ground. Suction cups hold bulbs for easy changing. Quick release design breaks the suction on the bulb quickly and easily. Standard 3/4" acme threads to fit most extension poles, pole not included. Made in the USA. Waterproof protection for outside receptacle. Self-closing lids. Installation hardware, gasket, and multi-lingual instructions included. Size: 4-1/2" width x 4-1/2" length. C/UL/US UL 514-A listed, CSA and NEMA 3R rated.
Rayntite 5028-5 Weatherproof Device Cover Bell Rayntite 5028-6 Weatherproof Weatherproof Device Cover Carlon E9G2DSN-CAR Weatherproof Device Cover
For outdoor GFCI receptacles and wet locations. Die cast aluminum construction, powder coat finish. Scratch resistant. Self-closing lid assures protection when not in use. Padlockable. May be mounted to box or device. Includes installation hardware, gasket, and multi-lingual instructions. 4-1/2" length x 2-3/4" width. UL listed 514-A , File E 195978 CSA C22.2 No. 18 NEMA 3R rated. For outdoor GFCI receptacles and wet locations. Die cast aluminum construction, powder coat finish. Scratch resistant. Self-closing lid assures protection when not in use. Padlockable. May be mounted to box or device. Includes installation hardware, gasket, and multi-lingual instructions. 4-1/2" length x 2-3/4" width. UL listed 514-A , File E 195978 CSA C22.2 No. 18 NEMA 3R rated. For two gang duplex receptacles and weatherproof toggle switch applications.
Bell 5145-0 Weatherproof Cover 4-1/2 in L x 4-9/16 in W Eaton DS900AP Rainproof Type DS Hub Adapter Kit Carlon E998J-CAR Service Entrance Cap
Cast cover for use whenever weatherproof protection is required for an outdoor receptacle. Heavy duty metallic construction will last the life of the installation. Self closing lids assure weatherproof protection when the receptacle is not in use. Comes with installation instructions, gasket and hardware. UL, CSA Compliant. Small hub to large opening. Permits installation of group 1 hubs on 200 Amp type general-duty, heavy-duty and double throw switches. NEMA 3R. Safe, non-conductive. To bring overhead wiring from outside into conduit run. Will not rust or corrode. For use with Schedule 40/80 non-metallic solvent weld fittings.
Bussmann Fuses BP/FP-2 Fuse Pullers Halex 09215 Compression Standard Water-Tight Connector Smart 3001 Bulb Changer Kit
Heavy-duty tool for safely removing cartridge fuses from their blocks. Die cast of high strength zinc alloy. Use to secure SE/SEU cable to a metal enclosure. Use to connect UF cable to a waterproof box with a threaded hub. Smart bulb changers attach to an extension pole and allow the user to remove and replace bulbs quickly and easily, while standing safely on the ground. Suction cups hold bulbs for easy changing. Quick release design breaks the suction on the bulb quickly and easily. Standard 3/4" acme threads to fit most extension poles, pole not included. Made in the USA.
Halex 10220 Standard Water-Tight Connector Bell Raco 5157-0 Round Weatherproof Device Cover Halex 77920 Service Entrance Cap
Die cast of high strength zinc alloy. Use to secure SE/SEU cable to a metal enclosure. Use to connect UF cable to a waterproof box with a threaded hub. Powder coat finish and scratch resistant. Weatherproof protection for outdoor receptacles. Self-closing lids assure weatherproof protection when the receptacle is not in use. Includes installation hardware, gasket, and multi-lingual instructions. 2 single, 1.406" diameter receptacle openings. C/UL/US UL 514-A listed, CSA C22.2 No. 18, NEMA 3R Rated. Shrink pack. Indoor or outdoor applications. Use in an overhead service entrance. Cap mounts on top of PVC, Rigid or IMC conduit. Serves as a connecting point for the service entrance wires. Bulk packed.
Carlon Code Keeper Red Dot CKNM-NGD Clip-On Weatherproof Cover Eaton ARP00006CH2 Type A Hub Closure Plate Eaton RH150P Rainproof Type H Conduit Hub
Accepts GFCI, duplex, switch and up to 1-3/8" round devices. Nonconductive, noncorrosive, and impact resistant. Won't rust or fade. Scratch resistant. For use in wet/damp locations. Keyhole mounts, loosen the existing device screws and slide the cover over. Comes with adapter plates and pre-adhered gaskets. Wasp guard included to keep out unwanted pests. Lockable for security. UL Listed. For use on Cutler Hammer meter sockets. For load centers No. PL0724R and Challenger No, S3100RN; commonly used on WNB breakers.
Gardner Bender GKC-100A  Pvc Cutter Halex 64415 Conduit Elbow Halex 60525 Adjustable Wire Holder
Design makes fast, clean cuts. Cuts flexible, water-tight flexible, and PVC conduit 1/2" to 1". Reversible cutting blade, lightweight nylon handles, compact 8" tool fits neatly in pocket or tool pouch. To connect EMT conduit together to allow for 90 degree bends. UL Approved. Porcelain and steel. Used to secure the incoming service entrance wires. Mounts below the overhead service entrance cap. Tray boxed.
Siemens ECHS200 Type HS Conduit Hub COVR W/INLT WP GRY 1G 15A 125V Halex 77121 Weatherproof Cover
For use on all Siemens loadcenters, main lug, main breaker and meter socket; plus enclosed circuit breakers Nos. WB2225, WB3225. Weatherproof 1-gang plastic cover with motor base inlet. UL Listed for wet locations with cover closed. Meets 2014 NEC 404.4. Ready for outdoor installation. Gasket seals both openings and edges. Horizontal mounting. 15A/125VAC, NEMA 5-15P. 4.75" x 2.95" x .75". cULus Listed. Corrosion resistant for installation and operation in wet or damp locations. UL Listed.
SNAKE MINI CABLE 15FT         Eaton DS200H2P Rainproof Conduit Hub Halex 10420B Compression Standard Water-Tight Connector
SNAKE MINI CABLE 15FT
Our Price: $11.79
Innovative, ultra-compact fish tape. Feed under carpets, over drop ceilings and down walls. Ideal for short runs, installing speakers, home networks, cable and other common electrical uses. Durable, high-impact housing resists breaking. Low memory tape does not curl during extension; ideal for non-conduit situations. Compact, rugged design can be stored in tool box or belt. Weighs 0.5 lbs. For use with MLO and MCB loadcenters and circuit breaker enclosures. Die cast of high strength zinc alloy. Use to secure SE/SEU cable to a metal enclosure. Use to connect UF cable to a waterproof box with a threaded hub.
CONNECTOR WATER TITE 2IN      Halex 58020 Clamp On Weatherhead Service Entrance Cap Square D B150 Rainproof Bolt On Type B Conduit Hub
CONNECTOR WATER TITE 2IN
Our Price: $12.16
Die cast of high strength zinc alloy. Use to secure SE/SEU cable to a metal enclosure. Use to connect UF cable to a waterproof box with a threaded hub. Aluminum die cast. Indoor or outdoor applications. Use in an overhead service entrance. Mounts on top of EMT, Rigid or IMC conduit. Serves as a connecting point for the service entrance wires. UL Listed meets CSA requirements. Tray boxed. Aluminum, for use on NEMA 3R (outdoor) enclosures. Off-center conduit threaded opening and elongated mounting holes reduce the need for conduit offsets and bends while allowing for adjustments. Type B size and is UL and CSA safety listed.
Square D B100 Rainproof Bolt On Type B Conduit Hub Square D B125 Rainproof Bolt On Type B Conduit Hub GB-Gardner Bender LNW-KIT Locknut Wrenches
Aluminum, for use on NEMA 3R (outdoor) enclosures. Off-center conduit threaded opening and elongated mounting holes reduce the need for conduit offsets and bends while allowing for adjustments. Type B size and is UL and CSA safety listed. Aluminum, for use on NEMA 3R (outdoor) enclosures. Off-center conduit threaded opening and elongated mounting holes reduce the need for conduit offsets and bends while allowing for adjustments. Type B size and is UL and CSA safety listed. Fits the majority of UL locknuts. Etched markings allow for easy identification, clearly marked tighten and loosen ends. Thin design allows easy maneuvering in tight locations. Durable steel construction. Hooked tip latches onto locknut and maximizes turning leverage.
Gardner Bender KF-200 2-In-1 Electricians Knife Eaton RH200P Rainproof Type H Conduit Hub Gardner Bender SCE-3262 Insulated Screwdriver Set
Tempered carbon steel blade and screwdriver. For load centers No. PL0724R and Challenger No, S3100RN; commonly used on WNB breakers. Ergonomic high leverage grips for maximum torque, molded and insulated shaft rated to 1000 volts for protection when working with electricity. Hardened chrome vanadium steel, with magnetic tips. 2 piece set, SCE-3252 - No. 2 Phillips tip and SCE-3256 - 3/16" slotted tip. Carded.
Square D B200 Rainproof Bolt On Type B Conduit Hub Carlon Code Keeper Red Dot 2CKNM-NG Weatherproof Device Cover Smart 4003 Bulb Changer Kit
Aluminum, for use on NEMA 3R (outdoor) enclosures. Off-center conduit threaded opening and elongated mounting holes reduce the need for conduit offsets and bends while allowing for adjustments. Type B size and is UL and CSA safety listed. Accepts GFCI, duplex, switch and up to 1-3/8" round devices. Nonconductive, noncorrosive, and impact resistant. Won't rust or fade. Scratch resistant. For use in wet/damp locations. Keyhole mounts, loosen the existing device screws and slide the cover over. Comes with adapter plates and pre-adhered gaskets. Wasp guard included to keep out unwanted pests. Lockable for security. UL Listed. Flexible fingers slide over and grasp bulbs for easy changing. Fits incandescent and many other bulbs including most compact fluorescent, LED, sodium, metal halide, standard and mogul base lamps. Standard 3/4" acme threads to fit most extension poles, pole not included. Made in the USA.
WRENCH KIT LOCKNUT 3PC        RECEPTACLE/CVR DPLX KIT GRY 1G RECEPTACLE/CVR DPLX KIT BRZ 1G
WRENCH KIT LOCKNUT 3PC
Our Price: $13.74
Easily tighten and loosen locknuts in tight spaces. Thin tools fit a majority of UL locknuts. Etched markings allow for easy identification; clearly marked tighten and loosen ends make usage a breeze. Hooked tips latch onto locknuts and maximize turning leverage. Durable lightweight tools fit easily in a pocket. Includes: (1) 1/2" wrench, (1) 3/4" wrench and (1) 1" wrench. Length: 5" - 6-1/4". For use in wet, damp or dry locations. Die cast aluminum construction. Powder coat finish. Self-closing lids assure weatherproof protection when the receptacle is not in use. One each 125 volt, 15 amp receptacle, single-gang box, installation hardware, cover and gasket included. 2.656" depth x 4.563" height x 2.813" width. cULus Listed, NEMA 3R. Boxed. For use in wet, damp or dry locations. Die cast aluminum construction. Powder coat finish. Self-closing lids assure weatherproof protection when the receptacle is not in use. One each 125 volt, 15 amp receptacle, single-gang box, installation hardware, cover and gasket included. 2.656" depth x 4.563" height x 2.813" width. cULus Listed, NEMA 3R. Boxed.
RECEPTACLE/CVR DPLX KIT WHT 1G DOORBELL WIRED CHIME WHITE    CHIME W/BUTTON B/O WIRELESS
For use in wet, damp or dry locations. Die cast aluminum construction. Powder coat finish. Self-closing lids assure weatherproof protection when the receptacle is not in use. One each 125 volt, 15 amp receptacle, single-gang box, installation hardware, cover and gasket included. 2.656" depth x 4.563" height x 2.813" width. cULus Listed, NEMA 3R. Boxed. With two sound options, Ding-Dong and Ding. Wireless doorbell kit. Off-white cover. Battery operated chime. 75 decibel maximum. Requires alkaline batteries, not included. Push button with battery included.
DOORBELL CHM 2BTN W/TRNSFMR   Arrow Hart WIU-1 Self-Closing Weatherproof Cover Halex 29525 Insulated Metallic Grounding Conduit Bushing with Lug
Includes chime, lighted push button, unlighted push button and cULus Listed transformer. 2 sound options, Ding-Dong and Ding. 95 decibel maximum. 7.25" w x 2" d x 4" h. UV resistant polycarbonate back, see-through self closing cover and pre-mounted gasket protect against rain, sleet and snow without cracking or breaking. Non-corrosive and non-conductive. Snap-in inserts for flexibility. Moveable hinges mount either horizontally or vertically in vinyl, brick, stucco or concrete. Meets and exceeds UL outdoor low voltage landscape lighting requirements. Meets 1999 NEC Article 210-60 (b) for hotels and motels requiring covered receptacles behind beds, and 2002 NEC Article 406.8 (B) (1) for receptacles in damp or wet locations. Comes standard with three inserts (for a total of 16 different configurations): duplex, decorator and a toggle/five receptacle opening. Receptacle sizes are: 1.25" (31.75mm), 1.375" (34.925mm), 1.625" (41.275mm), 1.75" (44.45mm), and 2.125" (54.00mm). 3.25" deep x 6.085" x 4.446". UL and cUL listed, meets NEMA 3R requirements. Zinc die cast. Rounded surface prevents damage to insulation. Thermoplastic liner rated at 150 degree F. Indoor or outdoor use. Use with locknut to terminate service conduit to a cabinet. Lug provided for bonding jumper to a neutral bus bar. UL Listed, CSA Approved.
LANTERN USB RECHARGEABLE 100L Halex 57699 Oval Standard Service Cable Cap Halex 75212B Insulated Conduit Bushing
Features a unique design that is both IPX7 waterproof and impact resistant. Three light modes include high, medium and low. The lantern runs for 4 hours on high and easily recharges via built in USB cable. The USB cable also doubles as a versatile hanger. Comes in assorted colors. Uses 1000 Mah Li-ion battery. Battery included. Copper-free aluminum die cast. Indoor or outdoor applications. Use in overhead services that utilize SEU cable. Tray boxed. High impact thermoplastic. Flame retardant to 105 degrees C. Use with locknut to terminate threaded Rigid or IMC conduit to an outlet box. The rounded surface of the bushing prevents damage to wire insulation. Required by the NEC. UL Listed, CSA Approved.
Murray ECHA075 Interchangeable Type HA Conduit Hub Raco Rayntite 5775-0 Multi Directional Weatherproof Cover CHIME W/BUTTON CVR PLUG-IN WHT
Hubs suitable for 3R switches. High-impact polycarbonate construction, virtually indestructible, will not rust or corrode. 2-3/4 inch depth, 2 gang, pre-configured for GFCI with patented Knockout technology for alternate devices. 55 in 1 multiple combinations of duplex, GFCI, switch, and rounds: 1-1/4", 1-3/8", 1-9/16", 1-5/8", 1-11/16", 1-3/4, 2-1/8", 2-1/4", 2-7/16". Clear lid. Lockable design prevents tampering and accidental disconnects. Tri-lingual instructions. Includes attached gasket and mounting hardware. 5.54" x 5.43". Meets NEC requirements, UL Listed. NEMA 3R Rated. Shrink wrapped. Wireless doorbell kit, white cover. Chime plugs into any standard wall socket. 75 decibel maximum. UL/cUL, FCC and IC Certified.
COVER 2G 2-TOGGLE WP 15A GRAY BOOK REFERENCE ELECTRICAL     Halex 33520 Conduit Support
BOOK REFERENCE ELECTRICAL
Our Price: $16.52
For use whenever weatherproof protection is required for an "on/off" type switch. Powder coat finish. Supplied with a switch unassembled to the cover - no need to purchase separate components. Includes installation hardware and multi-lingual instructions. UL Listed, CSA, NEMA 3R Rated. Reference books that outline safe wiring recommendations based on the National Electrical Code. Ugly's Electrical References is a 2017 revised edition. A quick, on-the-job reference guide for the most commonly required information in an easy-to-read format. Malleable iron. Use to secure service entrance conduit to the surface of a building. With 10" bolt, nut and washer. Tray boxed.
Halex 64420 Conduit Elbow HEADLIGHT RECHARGABLE USB 120L DOORBELL WIRED CHIME WHITE
To connect EMT conduit together to allow for 90 degree bends. UL Approved. Features both area and spot modes, allowing you to light a wide area or a specific tight area, increasing versatility and usefulness. Its hands free motion sensor allows the light to be turned on and off with the wave of your hand. This is especially useful if you?re wearing gloves or have oily or wet hands. The light is weather and impact resistant and includes an adjustable head strap and clip for increased wearing comfort. With 120 lumens of power and 8 hours of run time on high, you won?t have to recharge often. But when it?s time to recharge, simply use the included USB charge cable and six hours later you will have a full charge. This headlight is lightweight and comfortable to wear, but powerful enough to light up your task, whether you?re working after dark, hiking, or camping. This is also a great light to keep on hand in case of power outage or emergency. Uses 1200 Mah Li-ion Battery. With two sound options, Ding-Dong and Ding.
Halex 75215B Insulated Conduit Bushing DOORBELL WIRELESS PLUGIN      Halex 33525 Conduit Support Kit
DOORBELL WIRELESS PLUGIN
Our Price: $17.89
High impact thermoplastic. Flame retardant to 105 degrees C. Use with locknut to terminate threaded Rigid or IMC conduit to an outlet box. The rounded surface of the bushing prevents damage to wire insulation. Required by the NEC. UL Listed, CSA Approved. Wireless doorbell kit, white cover. Chime plugs into any standard wall socket. 75 decibel maximum. UL/cUL, FCC and IC Certified. Malleable iron. Use to secure service entrance conduit to the surface of a building. With 10" bolt, nut and washer. Tray boxed.
Klein Tools 2100-7 Electrician Scissor Halex 61930 Rigid IMC Conduit Locknut LED FLSHLT EMERGNCY 4000K 120V
For telecom and electrical applications. Strong, tough tempered steel with nickel-plated finish. Upper blade has notches for stripping 19 AWG and 23 AWG wire. Scraper and file on outside of both blades. Serrated lower blade reduces slippage. 5-1/4'' length, .20 pounds. Steel with zinc plating. Indoor or outdoor applications. Use to secure Rigid or IMC conduit or various threaded fittings to a steel outlet box or other metal enclosure.
Halex 75205B Insulated Conduit Bushing Gardner Bender EFT-50B Economy Fish Tape LANTERN USB RCHGBL W/PWR BANK
High impact thermoplastic. Flame retardant to 105 degrees C. Use with locknut to terminate threaded Rigid or IMC conduit to an outlet box. The rounded surface of the bushing prevents damage to wire insulation. Required by the NEC. UL Listed, CSA Approved. Standard steel tape. View port in reel to view amount of tape used. Reel diameter 7". 50' x 1/8 x .045". Built in battery power indicator, built in USB charge cable. Other features include dimmable lantern light, a magnetic base for hands free use, Velcro strap for hanging, and water and impact resistance. A USB rechargeable battery is also included. Assorted colors.
GE TC250P Rainproof Conduit Hub Sunco Randolph FS330RT Wall Filler CHIME DOOR WIRELESS
CHIME DOOR WIRELESS
Our Price: $21.67
For outdoor enclosures with removable closing caps. 3/4" thick comprised of a wood veneer in matching species and finish over a wood substrate. Wireless doorbell kit. Off-white cover. Battery operated chime. 75 decibel maximum. Requires alkaline batteries, not included. Push button with battery included.
BigBen BH-75 Conduit Bender Handle Halex 61925 Rigid IMC Conduit Locknut GB BigBen Hand Bender Head
Pre-threaded for easy assembly and labeled with an informative guide for efficient conduit bending. Fits aluminum bender numbers 910, 911, 930, 931, 940, 941; iron bender numbers 920, and 921. Steel with zinc plating. Indoor or outdoor applications. Use to secure Rigid or IMC conduit or various threaded fittings to a steel outlet box or other metal enclosure. GB Hand Bender Head, Series: BigBen, 10, 22, 30, 45, 60 and 90 deg Bend, 3.69 in Bend Radius, Aluminum Body, Suitable For Use With Gardner Bender BH-75 Hand Bender Handle, For 1/2 in EMT Conduit
Arrow Hart WIU-2 Self-Closing Weatherproof Cover Halex 57925 Mast Head Service Entrance Cap TORCH BUTANE POCKET W/REFILL