Home > PLUMBING > KITCHEN & BATH > FIXTURES > BATHTUBS
Choose a sub category:
DOORBELLS, CHIMES & INTERCOMS DOORBELLS, CHIMES & INTERCOMS FISH TAPES
CONDUIT BENDERS DOORBELL BUTTONS/ACCESSORIES DOORBELL BUTTONS/ACCESSORIES
DOORBELLS, CHIMES - SMART/WIFI DOORBELLS, CHIMES - SMART/WIFI WIRE STRIPPERS & CRIMPING TOOL
CIRCUIT/VOLTAGE TESTERS FUSE PULLERS LIGHT BULB CHANGERS
ALLIGATOR CLIPS GREENLEE SPECIALTY TOOLS/ACCES MISC TOOLS & ACCESSORIES
Sort By:
1
Carlon E940D-CTN Standard Conduit Coupling Carlon E943D-CTN Terminal Adapter Carlon E940E-CTN/CAR Standard Conduit Coupling
Safe, non-conductive. Schedule 40 non-metallic socket type coupling for joining Schedule 40 non-metallic conduit. Will not rust or corrode. RoHS Compliance, UL Listed. Safe, non-conductive. For adapting schedule 40 non-metallic conduit to boxes, threaded fittings, metallic systems. Male threads on one end, socket end on the other. Will not rust or corrode. UL Listed, RoHS Compliance. Safe, non-conductive. Schedule 40 non-metallic socket type coupling for joining Schedule 40 non-metallic conduit. Will not rust or corrode. RoHS Compliance, UL Listed.
Carlon E942DR-CTN Conduit Adapter Halex 71205B 2-Hole Conduit Strap Carlon E942ER-CTN Conduit Adapter
Safe, non-conductive. For adapting Schedule 40 non-metallic conduit to boxes, threaded fittings, metallic systems. Female threads one end, socket end on the other. Will not rust or corrode. Indoor or outdoor applications. Use to secure PVC conduit to wood, masonry or similar surface. Bulk packed. Safe, non-conductive. For adapting Schedule 40 non-metallic conduit to boxes, threaded fittings, metallic systems. Female threads one end, socket end on the other. Will not rust or corrode.
Carlon E940FR-CTN Standard Conduit Coupling Carlon E943E-CTN Terminal Adapter Halex 61612B 2-Hole Snap-On Conduit Strap
Safe, non-conductive. Schedule 40 non-metallic socket type coupling for joining Schedule 40 non-metallic conduit. Will not rust or corrode. RoHS Compliance, UL Listed. Safe, non-conductive. For adapting schedule 40 non-metallic conduit to boxes, threaded fittings, metallic systems. Male threads on one end, socket end on the other. Will not rust or corrode. UL Listed, RoHS Compliance. To support EMT conduit where greater load bearing is required. Indoor or outdoor applications.
Carlon E943FR-CTN Terminal Adapter Halex 71210B 2-Hole Conduit Strap Halex 71212B 2-Hole Conduit Strap
Safe, non-conductive. For adapting schedule 40 non-metallic conduit to boxes, threaded fittings, metallic systems. Male threads on one end, socket end on the other. Will not rust or corrode. UL Listed, RoHS Compliance. Indoor or outdoor applications. Use to secure PVC conduit to wood, masonry or similar surface. Bulk packed. Indoor or outdoor applications. Use to secure PVC conduit to wood, masonry or similar surface. Bulk packed.
Halex 96163 2-Hole Snap-On Conduit Strap Carlon E996DR-CTN Conduit Box Adapter Carlon Snap Strap E978DC-CAR 1-Hole Single Conduit Strap
To support EMT conduit where greater load bearing is required. Indoor or outdoor applications. For PVC enclosures. cULus Listed. Safe, non-conductive. To be used in accordance with NEC, Article 347.8 conduit spacing requirements. For use with Schedule 40/80 non-metallic solvent weld fittings.
Carlon E940GR-CTN Standard Conduit Coupling Halex 71215B 2-Hole Conduit Strap Carlon E942FR-CTN Conduit Adapter
Safe, non-conductive. Schedule 40 non-metallic socket type coupling for joining Schedule 40 non-metallic conduit. Will not rust or corrode. RoHS Compliance, UL Listed. Indoor or outdoor applications. Use to secure PVC conduit to wood, masonry or similar surface. Bulk packed. Safe, non-conductive. For adapting Schedule 40 non-metallic conduit to boxes, threaded fittings, metallic systems. Female threads one end, socket end on the other. Will not rust or corrode.
Carlon UA9ADB-CTN Standard Radius Rigid Conduit Elbow Carlon E996ER-CTN Conduit Box Adapter Carlon Snap Strap E978EC-CAR 1-Hole Single Conduit Strap
For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant. Schedule 40. UL 651 Listed to the NEC by the ETL, UL Listed. For PVC enclosures. cULus Listed. Safe, non-conductive. To be used in accordance with NEC, Article 347.8 conduit spacing requirements. For use with Schedule 40/80 non-metallic solvent weld fittings.
Carlon UA9ADR-CTN Standard Radius Conduit Elbow Carlon E940HR-CTN Standard Conduit Coupling Carlon E943GR-CTN Terminal Adapter
For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant. Safe, non-conductive. Schedule 40 non-metallic socket type coupling for joining Schedule 40 non-metallic conduit. Will not rust or corrode. RoHS Compliance, UL Listed. Safe, non-conductive. For adapting schedule 40 non-metallic conduit to boxes, threaded fittings, metallic systems. Male threads on one end, socket end on the other. Will not rust or corrode. UL Listed, RoHS Compliance.
Carlon UA7ADB-CTN Standard Radius Conduit Elbow Carlon UA9AER-CTN Standard Radius Conduit Elbow Halex 96111 1-Hole Conduit Strap
For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant. UL Listed E35297. For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant. Indoor or outdoor applications. Use to secure Rigid or I.M.C. conduit to wood, masonry or similar surfaces.
Halex 61220B 2-Hole Conduit Strap Carlon UA7ADR-CAR Standard Radius Conduit Elbow Carlon E943HR-CTN Terminal Adapter
Indoor or outdoor use. Use to secure Rigid or IMC conduit to wood, masonry or similar surfaces where greater load bearing is required. UL Listed, CSA Approved. For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant. UL Listed E35297. Safe, non-conductive. For adapting schedule 40 non-metallic conduit to boxes, threaded fittings, metallic systems. Male threads on one end, socket end on the other. Will not rust or corrode. UL Listed, RoHS Compliance.
Carlon UA9AEB-CTN Standard Radius Rigid Conduit Elbow Carlon E942GR-CTN Conduit Adapter Thomas & Betts E950ED-CTN Reducing Bushing
For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant. Schedule 40. UL 651 Listed to the NEC by the ETL, UL Listed. Safe, non-conductive. For adapting Schedule 40 non-metallic conduit to boxes, threaded fittings, metallic systems. Female threads one end, socket end on the other. Will not rust or corrode. For connecting different sizes of conduit. Socket both ends, for reducing male Schedule 40/80 conduit runs or fittings to female. Non-conductive. Will not rust or corrode.
Halex 96560 Beam Clamp Halex 71220B 2-Hole Conduit Strap Carlon Snap Strap E978FC-CAR 1-Hole Single Conduit Strap
Use to secure conduit to a metal beam. Clamps on beam, girder or similar structure to provide a mounting base for attachment of a conduit hanger, either directly or by means of a threaded rod. Eliminates need to drill hole through beam. Indoor or outdoor applications. Use to secure PVC conduit to wood, masonry or similar surface. Bulk packed. Safe, non-conductive. To be used in accordance with NEC, Article 347.8 conduit spacing requirements. For use with Schedule 40/80 non-metallic solvent weld fittings.
Carlon UA7AER-CAR Standard Radius Conduit Elbow Halex 96121 2-Hole Conduit Strap Carlon E940JR-CTN Standard Conduit Coupling
For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant. UL Listed E35297. Indoor or outdoor use. Use to secure Rigid or IMC conduit to wood, masonry or similar surfaces where greater load bearing is required. UL Listed, CSA Approved. Safe, non-conductive. Schedule 40 non-metallic socket type coupling for joining Schedule 40 non-metallic conduit. Will not rust or corrode. RoHS Compliance, UL Listed.
Carlon E942HR Conduit Adapter Thomas & Betts E977DC-CTN 2-Hole Conduit Clamp Halex 96151 1-Hole Snap-On Conduit Strap
Safe, non-conductive. For adapting Schedule 40 non-metallic conduit to boxes, threaded fittings, metallic systems. Female threads one end, socket end on the other. Will not rust or corrode. Offers same chemical resistance as Carlon nonmetallic conduit for a complete, corrosion resistant system. UV resistant for use in direct sunlight. Use in accordance with conduit spacing requirements per NEC. Each clamp requires 2 screws, 2 nuts, and 2 washers. Gray clamps for standard conduit. Indoor or outdoor applications. To support EMT conduit.
Carlon UA7AEB-CTN Standard Radius Conduit Elbow Halex 96780 Conduit Hanger Halex 96161 2-Hole Snap-On Conduit Strap
For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant. UL Listed E35297. Use to secure and suspend conduit from overhead supports. Comes with a nut and bolt. To support EMT conduit where greater load bearing is required. Indoor or outdoor applications.
Halex 96112 1-Hole Conduit Strap Halex 96213 1-Hole Cable Strap Halex 96781 Conduit Hanger
Indoor or outdoor applications. Use to secure Rigid or I.M.C. conduit to wood, masonry or similar surfaces. Steel, use to secure BX cable to wood, masonry or similar surface. Use to secure and suspend conduit from overhead supports. Comes with a nut and bolt.
Carlon UA9AFR-CTN Standard Radius Conduit Elbow Thomas & Betts E977EC-CTN 2-Hole Conduit Clamp Carlon E943JRR Terminal Adapter
For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant. Offers same chemical resistance as Carlon nonmetallic conduit for a complete, corrosion resistant system. UV resistant for use in direct sunlight. Use in accordance with conduit spacing requirements per NEC. Each clamp requires 2 screws, 2 nuts, and 2 washers. Gray clamps for standard conduit. Safe, non-conductive. For adapting schedule 40 non-metallic conduit to boxes, threaded fittings, metallic systems. Male threads on one end, socket end on the other. Will not rust or corrode. UL Listed, RoHS Compliance.
Halex 96122 2-Hole Conduit Strap Carlon E942JR Conduit Adapter Carlon UA7AFR-CAR Standard Radius Conduit Elbow
Indoor or outdoor use. Use to secure Rigid or IMC conduit to wood, masonry or similar surfaces where greater load bearing is required. UL Listed, CSA Approved. Safe, non-conductive. For adapting Schedule 40 non-metallic conduit to boxes, threaded fittings, metallic systems. Female threads one end, socket end on the other. Will not rust or corrode. For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant. UL Listed E35297.
Carlon UA9AFB-CTN Standard Radius Conduit Elbow Halex 96162 2-Hole Snap-On Conduit Strap STRAP CBL 1HOLE SRVC ENT
For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant. Schedule 40. UL 651 Listed to the NEC by the ETL, UL Listed. To support EMT conduit where greater load bearing is required. Indoor or outdoor applications. Indoors or outdoors. Steel, use to secure service entrance cable (SEU, SER) to wood, masonry or similar surface.
Halex 96152 1-Hole Snap-On Conduit Strap Carlon UA7AFB-CTN Standard Radius Conduit Elbow Thomas & Betts E994DR-CTN Conduit Offset
Indoor or outdoor applications. To support EMT conduit. For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant. UL Listed E35297. Non-conductive. Will not rust or corrode.
Thomas And Betts Z703 1/2-25 Superstrut Halex 26155 1-Hole Snap-On Conduit Strap Carlon E950FD-CAR Reducing Conduit Bushing
Pipe straps hold conduit and pipes in channel. They are inserted along the slot side of the channel and twisted into place. Pre-assembled with locking slot / hex head bolt. Gold-galvanized corrosion free finish. Indoor or outdoor applications. To support EMT conduit. For connecting different sizes of conduit. Socket both ends, for reducing male Schedule 40/80 conduit runs or fittings to female. Non-conductive. Will not rust or corrode.
Halex 26211 1-Hole Conduit Strap Carlon UA9AGR-CTN Standard Radius Conduit Elbow Halex 61225 2-Hole Conduit Strap
Steel, use to secure BX cable to wood, masonry or similar surface. For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant. To support EMT conduit where greater load bearing is required. Indoor or outdoor applications.
Carlon UA7AGR-CAR Standard Radius Conduit Elbow Carlon E940K-CTN Conduit Coupling Halex 26210 1-Hole Service Entrance Strap
For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant. UL Listed E35297. Safe, non-conductive. Schedule 40 non-metallic socket type coupling for joining Schedule 40 non-metallic conduit. Will not rust or corrode. RoHS Compliance, UL Listed. Indoors or outdoors. Steel, use to secure service entrance cable (SEU, SER) to wood, masonry or similar surface.
CordMate Legrand C Wireway Outside Elbow CordMate Legrand C Wireway Inside Elbow CordMate Legrand C Wireway Flat Elbow
Hides and organizes loose cords and wires. Hides and organizes loose cords and wires. Hides and organizes loose cords and wire.
Halex 26165 2-Hole Snap-On Conduit Strap CordMate Legrand C19 Channel Coupling Superstrut 200 Series Angle Bracket Fitting
To support EMT conduit where greater load bearing is required. Indoor or outdoor applications. Joins channels that hide and organize loose cords and wires. UL Listed. For use in metal framing applications. Manufactured from hot rolled carbon steel.
Thomas And Betts Z703 3/4-25 Superstrut Halex 26153 1-Hole Snap-On Conduit Strap CordMate II Legrand C Wireway Flat Elbow
Pipe straps hold conduit and pipes in channel. They are inserted along the slot side of the channel and twisted into place. Pre-assembled with locking slot / hex head bolt. Gold-galvanized corrosion free finish. Indoor or outdoor applications. To support EMT conduit. Hides and organizes loose cords and wire.
Halex 26125 2-Hole Conduit Strap Bell 5269-5 Closure Plug Bell 5269-7 Closure Plug
Indoor or outdoor use. Use to secure Rigid or IMC conduit to wood, masonry or similar surfaces where greater load bearing is required. UL Listed, CSA Approved. For use with weatherproof boxes, extension adapters, cluster covers and round splice boxes to seal off unused outlets. For use with weatherproof boxes, extension adapters, cluster covers and round splice boxes to seal off unused outlets.
Bell 5269-6 Closure Plug Thomas & Betts E950FE-CTN Reducing Bushing CordMate II Legrand C Wireway Inside Elbow
For use with weatherproof boxes, extension adapters, cluster covers and round splice boxes to seal off unused outlets. For connecting different sizes of conduit. Socket both ends, for reducing male Schedule 40/80 conduit runs or fittings to female. Non-conductive. Will not rust or corrode. For making a 90 degree turn around an inside corner from wall-to-wall or wall-to-ceiling.
CordMate II Legrand C Wireway Outside Elbow CordMate II Legrand C59 Joint Cover Channel Coupling CordMate II Legrand C 3-Way Standard T-Fitting
For making a 90 degree turn around an outside corner. Joins channels that hide and organize loose cords and wires. UL Listed. For installation requiring 3-way branching including 90-degree angle.
Carlon E943K-CTN Terminal Adapter Thomas And Betts Z703 1 1/4-10 Superstrut Superstrut 200 Flat Straight Bracket Splice Plate 7-1/4 in L
Safe, non-conductive. For adapting schedule 40 non-metallic conduit to boxes, threaded fittings, metallic systems. Male threads on one end, socket end on the other. Will not rust or corrode. UL Listed, RoHS Compliance. Pipe straps hold conduit and pipes in channel. They are inserted along the slot side of the channel and twisted into place. Pre-assembled with locking slot / hex head bolt. Gold-galvanized corrosion free finish. Splices and supports conduit.
Carlon UA7AGB-CAR Standard Radius Conduit Elbow Thomas And Betts Z703 1-25 Carlon LN43DA-CTN Liquidtight Straight Angle Conduit Connector
For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant. UL Listed E35297. Pipe straps hold conduit and pipes in channel. They are inserted along the slot side of the channel and twisted into place. Pre-assembled with locking slot / hex head bolt. Gold-galvanized corrosion free finish. For flexible conduit. Non-metallic/non-conductive, corrosion resistant plastic.
Carlon E977LC-CAR Conduit Clamp Thomas And Betts Z702 21/2EG-10 Superstrut Pipe Clamp Thomas & Betts E994ER-CTN Conduit Offset
Offers same chemical resistance as Carlon nonmetallic conduit for a complete, corrosion resistant system. UV resistant for use in direct sunlight. Use in accordance with conduit spacing requirements per NEC. Each clamp requires 2 screws, 2 nuts, and 2 washers. Gray clamps for standard conduit. Pipe straps hold conduit and pipes in channel. They are inserted along the slot side of the channel and twisted into place. Pre-assembled with locking slot / hex head bolt. Non-conductive. Will not rust or corrode.
Halex 26163 2-Hole Snap-On Conduit Strap Thomas & Betts E977FC-CTN 2-Hole Conduit Clamp Halex 26126 2-Hole Conduit Strap
To support EMT conduit where greater load bearing is required. Indoor or outdoor applications. Offers same chemical resistance as Carlon nonmetallic conduit for a complete, corrosion resistant system. UV resistant for use in direct sunlight. Use in accordance with conduit spacing requirements per NEC. Each clamp requires 2 screws, 2 nuts, and 2 washers. Gray clamps for standard conduit. Indoor or outdoor use. Use to secure Rigid or IMC conduit to wood, masonry or similar surfaces where greater load bearing is required. UL Listed, CSA Approved.
Bell 5269-0 Closure Plug Thomas And Betts Z500-25 Superstrut Beam Clamp Carlon UA9AH-CAR Standard Radius Conduit Elbow
For use with weatherproof boxes, extension adapters, cluster covers and round splice boxes to seal off unused outlets. For hanging rod, silver electroplated finish. For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant.
Bell 5270-5 Closure Plug Superstrut 200 Series Angle Bracket Fitting Thomas And Betts Z703 1 1/2-10 Superstrut
For use with weatherproof boxes, extension adapters, cluster covers and round splice boxes to seal off unused outlets. For use in metal framing applications. Manufactured from hot rolled carbon steel. Pipe straps hold conduit and pipes in channel. They are inserted along the slot side of the channel and twisted into place. Pre-assembled with locking slot / hex head bolt. Gold-galvanized corrosion free finish.
Carlon UA7AHR-CTN Standard Radius Conduit Elbow Carlon E985D-CTN Rigid Conduit Body Carlon E984D-CTN Rigid Conduit Body
For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant. UL Listed E35297. For easy access and pulling of wires through conduit run. Textured lid, foam-in-place gasket. For use with Schedule 40/80 non-metallic solvent weld fittings. Will not rust or corrode. For easy access and pulling of wires through conduit run. For use with Schedule 40/80 non-metallic solvent weld fittings. Will not rust or corrode.
STRAP CBL 1HOLE OVAL SRVC ENT Carlon UB9AD-CAR Standard Radius Conduit Elbow Thomas & Betts E986D-CTN Type LB Rigid/IMC Conduit Body
Indoors or outdoors. Steel, use to secure service entrance cable (SEU, SER) to wood, masonry or similar surface. For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant. Rigid non-metallic Type LB conduit body. For easy access and pulling of wires through conduit run. For use with Schedule 40 non-metallic solvent weld fittings. Will not rust or corrode. With textured lid and foam-in-place gasket. Hubs are not threaded. UL Listed, RoHS Compliance.
Gardner Bender GCC-310 2-Hole Conduit Strap Halex 26154 1-Hole Snap-On Conduit Strap Carlon E940LR/CTN Conduit Coupling
Heavy-duty polyethylene, resists deterioration from UV rays and breakage from extreme cold. Enables secure fastening of plastic electrical conduit, schedule 40 PVC, copper tubing. Indoor or outdoor applications. To support EMT conduit. Safe, non-conductive. Schedule 40 non-metallic socket type coupling for joining Schedule 40 non-metallic conduit. Will not rust or corrode. RoHS Compliance, UL Listed.
Thomas And Betts Z702 3EG-10 Superstrut Halex 67860 Conduit Hanger Carlon E950GE-CAR Reducing Conduit Bushing
Pipe straps hold conduit and pipes in channel. They are inserted along the slot side of the channel and twisted into place. Pre-assembled with locking slot / hex head bolt. Use to secure and suspend conduit from overhead supports. Comes with a nut and bolt. For connecting different sizes of conduit. Socket both ends, for reducing male Schedule 40/80 conduit runs or fittings to female. Non-conductive. Will not rust or corrode.
Halex 26156 1-Hole Snap-On Conduit Strap Halex 26166 2-Hole Snap-On Conduit Strap Carlon LN43EA-CTN Liquidtight Straight Angle Conduit Connector
Indoor or outdoor applications. To support EMT conduit. To support EMT conduit where greater load bearing is required. Indoor or outdoor applications. For flexible conduit. Non-metallic/non-conductive, corrosion resistant plastic.
Thomas & Betts E950GF-CTN Reducing Bushing Carlon UA9AGB-CTN Standard Radius Conduit Elbow Carlon E987D-CTN Rigid Conduit Body
For connecting different sizes of conduit. Socket both ends, for reducing male Schedule 40/80 conduit runs or fittings to female. Non-conductive. Will not rust or corrode. For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant. Schedule 40. UL 651 Listed to the NEC by the ETL, UL Listed. For easy access and pulling of wires through conduit run. For use with Schedule 40/80 non-metallic solvent weld fittings. Will not rust or corrode. UL Listed.
Thomas & Betts E977GC-CTN 2-Hole Conduit Clamp Carlon UA7AHB-CAR Standard Radius Conduit Elbow Carlon E983D-CTN Rigid IMC Conduit Body
Offers same chemical resistance as Carlon nonmetallic conduit for a complete, corrosion resistant system. UV resistant for use in direct sunlight. Use in accordance with conduit spacing requirements per NEC. Each clamp requires 2 screws, 2 nuts, and 2 washers. Gray clamps for standard conduit. For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant. UL Listed E35297. For easy access and pulling of wires through conduit run. For use with Schedule 40/80 non-metallic solvent weld fittings. Will not rust or corrode.
Halex 61230 2-Hole Conduit Strap Thomas & Betts E950HGR Reducing Bushing Halex 26164 2-Hole Snap-On Conduit Strap
Indoor or outdoor use. Use to secure Rigid or IMC conduit to wood, masonry or similar surfaces where greater load bearing is required. UL Listed, CSA Approved. For connecting different sizes of conduit. Socket both ends, for reducing male Schedule 40/80 conduit runs or fittings to female. Non-conductive. Will not rust or corrode. To support EMT conduit where greater load bearing is required. Indoor or outdoor applications.
Carlon Carflex LN20DA-CTN Liquidtight Conduit Elbow Gardner Bender GCC-410 2-Hole Conduit Strap Carlon UA9AHB-CTN Standard Radius Rigid Conduit Elbow
For flexible conduit. Non-metallic, Non-conductive, corrosion resistant plastic. Heavy-duty polyethylene, resists deterioration from UV rays and breakage from extreme cold. Enables secure fastening of plastic electrical conduit, schedule 40 PVC, copper tubing. For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant. Schedule 40. UL 651 Listed to the NEC by the ETL, UL Listed.
Halex Straight Liquid Tight Connector Carlon E942K-CAR Conduit Adapter Carlon E943L-CAR Terminal Adapter
Fitting will not rust or corrode. No disassembly required. Reusable, hand tightened nut. Use to connect type B non-metallic liquid-tight conduit to a weatherproof outlet box, pool/spa equipment motor, central air conditioning unit or various other electrical enclosures or hubs. UL Approved. Safe, non-conductive. For adapting Schedule 40 non-metallic conduit to boxes, threaded fittings, metallic systems. Female threads one end, socket end on the other. Will not rust or corrode. Safe, non-conductive. For adapting schedule 40 non-metallic conduit to boxes, threaded fittings, metallic systems. Male threads on one end, socket end on the other. Will not rust or corrode. UL Listed, RoHS Compliance.
Carlon UB9AE-CAR Standard Radius Conduit Elbow Superstrut 200 Flat Right Angle Bracket Corner Plate Legrand NM7 Nonmetallic Raceway Inside Elbow
For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant. Splices and supports conduit. For making a 90 degree inside turn around a corner from wall-to-wall or wall-to-ceiling.
Legrand NM8 Nonmetallic Raceway Outside Elbow Wiremold NM910 Connection Cover CordMate Legrand NM Raceway Wireway Inside Elbow
For making a 90 degree outside turn around a corner. Mounting components for NMI wire channel, including screws and anchors, wire clips and joint cover. For making a 90 degree inside turn around a corner from wall-to-wall or wall-to-ceiling.
Legrand NMW910 Raceway Accessory Pack CordMate Legrand NM Raceway Wireway Outside Elbow Carlon E950JHR Reducing Conduit Bushing
Mounting components for NMI wire channel, including screws and anchors, wire clips and joint cover. For making a 90 degree outside turn around a corner. For connecting different sizes of conduit. Socket both ends, for reducing male Schedule 40/80 conduit runs or fittings to female. Non-conductive. Will not rust or corrode.
Hubbell 5193-0 3-Hole Cluster Lampholder Cover Halex 91625 Multi-Piece Liquid Tight Compression Connector Bell Raco 5193-1 Round Cluster Cover
For wet locations. Gasket, screws and plugs included. 4" cluster cover. Use 75-150 watt maximum, Die cast zinc. One 1/2" NPT hole. UL Listed. Zinc die cast. Use to connect liquid-tight conduit to a steel outlet box, metal enclosure or hub. UL Approved. For wet locations. Gasket, screws and plugs included. 4" cluster cover. Use 75-150 watt maximum, Die cast zinc. One 1/2" NPT hole. UL Listed.
Superstrut 200 Series Flat Straight Bracket Thomas & Betts E977HC-CTN 2-Hole Conduit Clamp Gardner Bender GCC-120 2-Hole Conduit Strap
Splices and supports conduit. Offers same chemical resistance as Carlon nonmetallic conduit for a complete, corrosion resistant system. UV resistant for use in direct sunlight. Use in accordance with conduit spacing requirements per NEC. Each clamp requires 2 screws, 2 nuts, and 2 washers. Gray clamps for standard conduit. Heavy-duty polyethylene, resists deterioration from UV rays and breakage from extreme cold. Enables secure fastening of plastic electrical conduit, schedule 40 PVC, copper tubing.
Halex 16205B Multi-Piece Liquid Tight Conduit Connector Gardner Bender GCC-510 2-Hole Conduit Strap Gardner Bender GCC-220 2-Hole Conduit Strap
Multi-piece. Zinc die cast. Use to connect liquid-tight conduit to a steel outlet box or other metal enclosure or hub. UL Listed. Bulk packed. Heavy-duty polyethylene, resists deterioration from UV rays and breakage from extreme cold. Enables secure fastening of plastic electrical conduit, schedule 40 PVC, copper tubing. Heavy-duty polyethylene, resists deterioration from UV rays and breakage from extreme cold. Enables secure fastening of plastic electrical conduit, schedule 40 PVC, copper tubing.
Halex 27621 Multi-Piece Liquid Tight Straight Conduit Connector Carlon Carflex LN20EA-CTN Liquidtight Conduit Elbow Hubbell 5186-0 1-Hole Cluster Lampholder Cover
Fitting will not rust or corrode. No disassembly required. Reusable, hand tightened nut. Use to connect type B non-metallic liquid-tight conduit to a weatherproof outlet box, pool/spa equipment motor, central air conditioning unit or various other electrical enclosures or hubs. UL Approved. For flexible conduit. Non-metallic, Non-conductive, corrosion resistant plastic. For wet locations. Gasket, screws and plugs included. Use 75-150 watt maximum, Par-38 lamps. Die cast zinc, powder coat finish provides maximum weatherability and scratch resistance. Includes installation hardware, gasket, and multi-lingual instructions. One 1/2" NPT hole. Underwriters Recognized Component CSA C22.2 No. 18 NEMA 3R Rated.
Carlon E983E-CTN Rigid IMC Conduit Body Carlon UB9AF-CAR Standard Radius Conduit Elbow Thomas & Betts E986E-CTN Type LB Rigid/IMC Conduit Body
For easy access and pulling of wires through conduit run. For use with Schedule 40/80 non-metallic solvent weld fittings. Will not rust or corrode. For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant. Rigid non-metallic Type LB conduit body. For easy access and pulling of wires through conduit run. For use with Schedule 40 non-metallic solvent weld fittings. Will not rust or corrode. With textured lid and foam-in-place gasket. Hubs are not threaded. UL Listed, RoHS Compliance.
Bell Raco 5186 Rectangular Cluster Cover Bell Raco 5186-6 1-Hole Cluster Rectangular Weatherproof Cover Carlon E985E-CTN Rigid Conduit Body
For wet locations. Gasket, screws and plugs included. Use 75-150 watt maximum, Par-38 lamps. Die cast zinc, powder coat finish provides maximum weatherability and scratch resistance. Includes installation hardware, gasket, and multi-lingual instructions. One 1/2" NPT hole. Underwriters Recognized Component CSA C22.2 No. 18 NEMA 3R Rated. For wet locations. Gasket, screws and plugs included. Use 75-150 watt maximum, Par-38 lamps. Die cast zinc, powder coat finish provides maximum weatherability and scratch resistance. Includes installation hardware, gasket, and multi-lingual instructions. One 1/2" NPT hole. Underwriters Recognized Component CSA C22.2 No. 18 NEMA 3R Rated. For easy access and pulling of wires through conduit run. Textured lid, foam-in-place gasket. For use with Schedule 40/80 non-metallic solvent weld fittings. Will not rust or corrode.
Carlon E984E-CTN Rigid Conduit Body Thomas & Betts E986F-CTN Type LB Rigid/IMC Conduit Body Thomas & Betts E977JCR-CTN 2-Hole Conduit Clamp
For easy access and pulling of wires through conduit run. For use with Schedule 40/80 non-metallic solvent weld fittings. Will not rust or corrode. Rigid non-metallic Type LB conduit body. For easy access and pulling of wires through conduit run. For use with Schedule 40 non-metallic solvent weld fittings. Will not rust or corrode. With textured lid and foam-in-place gasket. Hubs are not threaded. UL Listed, RoHS Compliance. Offers same chemical resistance as Carlon nonmetallic conduit for a complete, corrosion resistant system. UV resistant for use in direct sunlight. Use in accordance with conduit spacing requirements per NEC. Each clamp requires 2 screws, 2 nuts, and 2 washers. Gray clamps for standard conduit.
Carlon UA7AJ-CAR Standard Radius Conduit Elbow Superstrut ZCM1001/4-10 Cone Nut Bell Raco 5193-7 3-Hole Cluster Lamp Holder Cover
For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant. UL Listed E35297. Superstrut Cone Nut, 1/4 in Nominal, Nylon Cone, Steel Nut, Galvanized, Gold, For Superstrut Metal Framing and Hanger System For wet locations. Gasket, screws and plugs included. 4" cluster cover. Use 75-150 watt maximum, Die cast zinc. One 1/2" NPT hole. UL Listed.
Bell Raco 5193-5 Round Cluster Cover Bell Raco 5193-6 Round Cluster Cover Hubbell 5320-0 Outlet Box
For wet locations. Gasket, screws and plugs included. 4" cluster cover. Use 75-150 watt maximum, Die cast zinc. One 1/2" NPT hole. UL Listed. For wet locations. Gasket, screws and plugs included. 4" cluster cover. Use 75-150 watt maximum, Die cast zinc. One 1/2" NPT hole. UL Listed. For use in wet, damp or dry locations. Three 1/2" threaded outlets. 2" deep with lugs. May be used as a weatherproof junction box, or as a housing for receptacles, switches, and GFCIs. Powder coat finish. Eight box mounting options with detachable lugs provided. Includes two closure plugs. Ground screw installed. Multi-lingual instructions. Internal threads and hubs comply with NEMA requirements. Hubs accept all threaded fittings and threaded conduit. Die cast aluminum construction. 18.3 cubic inch capacity. 2" depth x 4-1/2" length x 2-3/4" width. UL Listed. NEMA 3R rated.
Bell Raco 5320-1 Weatherproof Box Carlon E983FR-CTN Rigid IMC Conduit Body Hubbell 5197-0 3-Hole Cluster Lampholder Cover
For use in wet, damp or dry locations. Three 1/2" threaded outlets. 2" deep with lugs. May be used as a weatherproof junction box, or as a housing for receptacles, switches, and GFCIs. Powder coat finish. Eight box mounting options with detachable lugs provided. Includes two closure plugs. Ground screw installed. Multi-lingual instructions. Internal threads and hubs comply with NEMA requirements. Hubs accept all threaded fittings and threaded conduit. Die cast aluminum construction. 18.3 cubic inch capacity. 2" depth x 4-1/2" length x 2-3/4" width. UL Listed. NEMA 3R rated. For easy access and pulling of wires through conduit run. For use with Schedule 40/80 non-metallic solvent weld fittings. Will not rust or corrode. For wet locations. Gasket, screws and plugs included. 4" cluster cover. Die cast zinc. Three 1/2" NPT holes. UL Listed.
Bell Raco 5197-2 Round Cluster Cover Bell Raco 5189 Rectangular Cluster Cover Bell Raco 5189 Rectangular Cluster Cover
For wet locations. Gasket, screws and plugs included. 4" cluster cover. Die cast zinc. Three 1/2" NPT holes. UL Listed. Includes installation hardware, gasket, and multi-lingual instructions. 3 hole covers are supplied with two closure plugs. Die cast zinc construction. Three 1/2" NPT holes. UR - Underwrites recognized component CSA C22.2 No. 18 compliant. Includes installation hardware, gasket, and multi-lingual instructions. 3 hole covers are supplied with two closure plugs. Die cast zinc construction. Three 1/2" NPT holes. UR - Underwrites recognized component CSA C22.2 No. 18 compliant.
Hubbell 5189-0 3-Hole Cluster Lampholder Cover Bell Raco 5197-1 Round Cluster Cover Carlon E987E-CTN Rigid Conduit Body
Includes installation hardware, gasket, and multi-lingual instructions. 3 hole covers are supplied with two closure plugs. Die cast zinc construction. Three 1/2" NPT holes. UR - Underwrites recognized component CSA C22.2 No. 18 compliant. For wet locations. Gasket, screws and plugs included. 4" cluster cover. Die cast zinc. Three 1/2" NPT holes. UL Listed. For easy access and pulling of wires through conduit run. For use with Schedule 40/80 non-metallic solvent weld fittings. Will not rust or corrode. UL Listed.
Carlon UA7AJB-CAR Standard Radius Conduit Elbow Carlon Z703 2 Pipe Clamp Legrand NM11 T-Fitting
For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant. UL Listed E35297. Pipe straps hold conduit and pipes in channel. They are inserted along the slot side of the channel and twisted into place. Pre-assembled with locking slot / hex head bolt. Gold-galvanized corrosion free finish. For branching wire channel in two directions at 90 degree angles.
CordMate Legrand NMW11 3-Way T-Fitting Carlon E942L-CAR Conduit Adapter Carlon E990DR-CAR Access Pull Standard Radius Conduit Elbow
For branching wire channel in two directions at 90 degree angles. Safe, non-conductive. For adapting Schedule 40 non-metallic conduit to boxes, threaded fittings, metallic systems. Female threads one end, socket end on the other. Will not rust or corrode. Access pull point for cable in tight radius. Allows conduit changes in direction. Won't rust or corrode. Gasket included.
Bell Raco 5606 Lampholder Bell Raco 5606 Lampholder Hubbell 5606 Adjustable Weatherproof Lampholder
Die cast zinc with porcelain socket. For wet locations. Use 75-150 watt maximum, Par-38 lamps. Includes gaskets and locknuts. UL Listed. Die cast zinc with porcelain socket. For wet locations. Use 75-150 watt maximum, Par-38 lamps. Includes gaskets and locknuts. UL Listed. Die cast zinc with porcelain socket. For wet locations. Use 75-150 watt maximum, Par-38 lamps. Includes gaskets and locknuts. UL Listed.
Gardner Bender GCC-610 2-Hole Conduit Strap Carlon UA9AJ-CAR Standard Radius Conduit Elbow Carlon UA9AJB-CAR Standard Radius Conduit Elbow
Heavy-duty polyethylene, resists deterioration from UV rays and breakage from extreme cold. Enables secure fastening of plastic electrical conduit, schedule 40 PVC, copper tubing. For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant. For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant. Schedule 40. UL 651 Listed to the NEC by the ETL, UL Listed.
Legrand NM6 Nonmetallic Raceway Flat Elbow CordMate Legrand NM Raceway Wireway Flat Elbow Carlon E987F-CAR Rigid Conduit Body
For making 90 degree right or left turns on a flat surface. For making 90 degree right or left turns on a flat surface. For easy access and pulling of wires through conduit run. For use with Schedule 40/80 non-metallic solvent weld fittings. Will not rust or corrode. UL Listed.
Bell Raco 5189 Rectangular Cluster Cover Bell Raco 5197-5 Round Cluster Cover Hubbell 5189-6 3-Hole Cluster Lampholder Cover
Includes installation hardware, gasket, and multi-lingual instructions. 3 hole covers are supplied with two closure plugs. Die cast zinc construction. Three 1/2" NPT holes. UR - Underwrites recognized component CSA C22.2 No. 18 compliant. For wet locations. Gasket, screws and plugs included. 4" cluster cover. Die cast zinc. Three 1/2" NPT holes. UL Listed. Includes installation hardware, gasket, and multi-lingual instructions. 3 hole covers are supplied with two closure plugs. Die cast zinc construction. Three 1/2" NPT holes. UR - Underwrites recognized component CSA C22.2 No. 18 compliant.
Hubbell 5197-6 3-Hole Cluster Lampholder Cover Bell Raco 5197-7 3-Hole Cluster Round Weatherproof Cover Hubbell 5320-6 Outlet Box
For wet locations. Gasket, screws and plugs included. 4" cluster cover. Die cast zinc. Three 1/2" NPT holes. UL Listed. For wet locations. Gasket, screws and plugs included. 4" cluster cover. Die cast zinc. Three 1/2" NPT holes. UL Listed. For use in wet, damp or dry locations. Three 1/2" threaded outlets. 2" deep with lugs. May be used as a weatherproof junction box, or as a housing for receptacles, switches, and GFCIs. Powder coat finish. Eight box mounting options with detachable lugs provided. Includes two closure plugs. Ground screw installed. Multi-lingual instructions. Internal threads and hubs comply with NEMA requirements. Hubs accept all threaded fittings and threaded conduit. Die cast aluminum construction. 18.3 cubic inch capacity. 2" depth x 4-1/2" length x 2-3/4" width. UL Listed. NEMA 3R rated.
Halex 27622 Multi-Piece Liquid Tight Straight Conduit Connector Bell Raco 5606 Adjustable Lampholder Bell Raco 5406-0 Weatherproof Extension Box
Fitting will not rust or corrode. No disassembly required. Reusable, hand tightened nut. Use to connect type B non-metallic liquid-tight conduit to a weatherproof outlet box, pool/spa equipment motor, central air conditioning unit or various other electrical enclosures or hubs. UL Approved. Die cast zinc with porcelain socket. For wet locations. Use 75-150 watt maximum, Par-38 lamps. Includes gaskets and locknuts. UL Listed. Used to provide additional capacity. Die cast aluminum construction. Installation hardware, gasket, and ground screw provided. 9.5 cubic inch capacity. 4-1/2" x 2-3/4" x 1" deep. UL Listed, CSA, NEMA 3R Rated.
Legrand B-8 Metal Raceway Outside Elbow Bell Raco 5606 Lampholder Hubbell 5606 Adjustable Weatherproof Lampholder
Used to make a 90 degree outside turn around a corner. Die cast zinc with porcelain socket. For wet locations. Use 75-150 watt maximum, Par-38 lamps. Includes gaskets and locknuts. UL Listed. Die cast zinc with porcelain socket. For wet locations. Use 75-150 watt maximum, Par-38 lamps. Includes gaskets and locknuts. UL Listed.
Thomas And Betts ZA1001/4EG-10 Superstrut Bell Raco 5320-2 Weatherproof Box Thomas And Betts Z502-10 Superstrut Beam Clamp
For use with 'A' and 'C' series channel and inserts. For use in wet, damp or dry locations. Three 1/2" threaded outlets. 2" deep with lugs. May be used as a weatherproof junction box, or as a housing for receptacles, switches, and GFCIs. Powder coat finish. Eight box mounting options with detachable lugs provided. Includes two closure plugs. Ground screw installed. Multi-lingual instructions. Internal threads and hubs comply with NEMA requirements. Hubs accept all threaded fittings and threaded conduit. Die cast aluminum construction. 18.3 cubic inch capacity. 2" depth x 4-1/2" length x 2-3/4" width. UL Listed. NEMA 3R rated. For hanging rod, silver electroplated finish.
Carlon E990ER-CAR Access Pull Standard Radius Conduit Elbow Halex 26141 Flat Drive Strap Halex 26151 1-Hole Snap-On Conduit Strap
Access pull point for cable in tight radius. Allows conduit changes in direction. Won't rust or corrode. Gasket included. Indoors or outdoors. To secure EMT conduit to a wood or masonry surface. Indoor or outdoor applications. To support EMT conduit.
Carlon UB9AG-CAR Standard Radius Conduit Elbow Thomas And Betts ZA1003/8EG-10 Superstrut Halex 61130 1-Hole Conduit Strap
For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant. For use with 'A' and 'C' series channel and inserts. Steel, indoor or outdoor. Use to secure Rigid or IMC conduit to wood, masonry or similar surfaces where greater load bearing is required. Tray boxed.
Gardner Bender GET-3100 Voltage Tester Legrand B-6 Metal Raceway Flat Elbow Legrand B-7 Metal Raceway Inside Elbow
Test for presence of voltage in live circuits. Tests AC/DC voltage from 80-250 volts. The neon indicator glows when voltage is present and brightens as voltage increases. Insulated housing and 2 inch test leads. Built in pocket clip. Tests DC motors, switches and outlets. With detailed user instructions. Used to make a 90 degree right or left turn on a flat surface. Used to make a 90 degree inside turn around a corner, from wall-to-wall or wall-to-ceiling.