Home > PLUMBING > KITCHEN & BATH > FIXTURES > KITCHEN SINKS
Sort By:
1
Halex 71205B 2-Hole Conduit Strap Halex 61612B 2-Hole Snap-On Conduit Strap Halex 71210B 2-Hole Conduit Strap
Indoor or outdoor applications. Use to secure PVC conduit to wood, masonry or similar surface. Bulk packed. To support EMT conduit where greater load bearing is required. Indoor or outdoor applications. Indoor or outdoor applications. Use to secure PVC conduit to wood, masonry or similar surface. Bulk packed.
Halex 71212B 2-Hole Conduit Strap Halex 96163 2-Hole Snap-On Conduit Strap Carlon Snap Strap E978DC-CAR 1-Hole Single Conduit Strap
Indoor or outdoor applications. Use to secure PVC conduit to wood, masonry or similar surface. Bulk packed. To support EMT conduit where greater load bearing is required. Indoor or outdoor applications. Safe, non-conductive. To be used in accordance with NEC, Article 347.8 conduit spacing requirements. For use with Schedule 40/80 non-metallic solvent weld fittings.
Halex 71215B 2-Hole Conduit Strap Carlon Snap Strap E978EC-CAR 1-Hole Single Conduit Strap Halex 96111 1-Hole Conduit Strap
Indoor or outdoor applications. Use to secure PVC conduit to wood, masonry or similar surface. Bulk packed. Safe, non-conductive. To be used in accordance with NEC, Article 347.8 conduit spacing requirements. For use with Schedule 40/80 non-metallic solvent weld fittings. Indoor or outdoor applications. Use to secure Rigid or I.M.C. conduit to wood, masonry or similar surfaces.
Halex 61220B 2-Hole Conduit Strap Halex 96560 Beam Clamp Halex 71220B 2-Hole Conduit Strap
Indoor or outdoor use. Use to secure Rigid or IMC conduit to wood, masonry or similar surfaces where greater load bearing is required. UL Listed, CSA Approved. Use to secure conduit to a metal beam. Clamps on beam, girder or similar structure to provide a mounting base for attachment of a conduit hanger, either directly or by means of a threaded rod. Eliminates need to drill hole through beam. Indoor or outdoor applications. Use to secure PVC conduit to wood, masonry or similar surface. Bulk packed.
Carlon Snap Strap E978FC-CAR 1-Hole Single Conduit Strap Halex 96121 2-Hole Conduit Strap Thomas & Betts E977DC-CTN 2-Hole Conduit Clamp
Safe, non-conductive. To be used in accordance with NEC, Article 347.8 conduit spacing requirements. For use with Schedule 40/80 non-metallic solvent weld fittings. Indoor or outdoor use. Use to secure Rigid or IMC conduit to wood, masonry or similar surfaces where greater load bearing is required. UL Listed, CSA Approved. Offers same chemical resistance as Carlon nonmetallic conduit for a complete, corrosion resistant system. UV resistant for use in direct sunlight. Use in accordance with conduit spacing requirements per NEC. Each clamp requires 2 screws, 2 nuts, and 2 washers. Gray clamps for standard conduit.
Halex 96151 1-Hole Snap-On Conduit Strap Halex 96780 Conduit Hanger Halex 96161 2-Hole Snap-On Conduit Strap
Indoor or outdoor applications. To support EMT conduit. Use to secure and suspend conduit from overhead supports. Comes with a nut and bolt. To support EMT conduit where greater load bearing is required. Indoor or outdoor applications.
Halex 96112 1-Hole Conduit Strap Halex 96213 1-Hole Cable Strap Halex 96781 Conduit Hanger
Indoor or outdoor applications. Use to secure Rigid or I.M.C. conduit to wood, masonry or similar surfaces. Steel, use to secure BX cable to wood, masonry or similar surface. Use to secure and suspend conduit from overhead supports. Comes with a nut and bolt.
Thomas & Betts E977EC-CTN 2-Hole Conduit Clamp Halex 96122 2-Hole Conduit Strap Halex 96162 2-Hole Snap-On Conduit Strap
Offers same chemical resistance as Carlon nonmetallic conduit for a complete, corrosion resistant system. UV resistant for use in direct sunlight. Use in accordance with conduit spacing requirements per NEC. Each clamp requires 2 screws, 2 nuts, and 2 washers. Gray clamps for standard conduit. Indoor or outdoor use. Use to secure Rigid or IMC conduit to wood, masonry or similar surfaces where greater load bearing is required. UL Listed, CSA Approved. To support EMT conduit where greater load bearing is required. Indoor or outdoor applications.
STRAP CBL 1HOLE SRVC ENT      Halex 96152 1-Hole Snap-On Conduit Strap Thomas And Betts Z703 1/2-25 Superstrut
Indoors or outdoors. Steel, use to secure service entrance cable (SEU, SER) to wood, masonry or similar surface. Indoor or outdoor applications. To support EMT conduit. Pipe straps hold conduit and pipes in channel. They are inserted along the slot side of the channel and twisted into place. Pre-assembled with locking slot / hex head bolt. Gold-galvanized corrosion free finish.
Halex 26155 1-Hole Snap-On Conduit Strap Halex 26211 1-Hole Conduit Strap Halex 61225 2-Hole Conduit Strap
Indoor or outdoor applications. To support EMT conduit. Steel, use to secure BX cable to wood, masonry or similar surface. To support EMT conduit where greater load bearing is required. Indoor or outdoor applications.
Halex 26210 1-Hole Service Entrance Strap CordMate Legrand C Wireway Outside Elbow CordMate Legrand C Wireway Inside Elbow
Indoors or outdoors. Steel, use to secure service entrance cable (SEU, SER) to wood, masonry or similar surface. Hides and organizes loose cords and wires. Hides and organizes loose cords and wires.
CordMate Legrand C Wireway Flat Elbow Halex 16010B Ground Clamp Halex 26165 2-Hole Snap-On Conduit Strap
Hides and organizes loose cords and wire. Indoor or outdoor applications. Use to secure the grounding wire to a 1/2" through 1" pipe. UL Listed. Wire size fits #10 - #2 AWG. To support EMT conduit where greater load bearing is required. Indoor or outdoor applications.
CordMate Legrand C19 Channel Coupling Superstrut 200 Series Angle Bracket Fitting Thomas And Betts Z703 3/4-25 Superstrut
Joins channels that hide and organize loose cords and wires. UL Listed. For use in metal framing applications. Manufactured from hot rolled carbon steel. Pipe straps hold conduit and pipes in channel. They are inserted along the slot side of the channel and twisted into place. Pre-assembled with locking slot / hex head bolt. Gold-galvanized corrosion free finish.
Halex 26153 1-Hole Snap-On Conduit Strap CordMate II Legrand C Wireway Flat Elbow Halex 26125 2-Hole Conduit Strap
Indoor or outdoor applications. To support EMT conduit. Hides and organizes loose cords and wire. Indoor or outdoor use. Use to secure Rigid or IMC conduit to wood, masonry or similar surfaces where greater load bearing is required. UL Listed, CSA Approved.
CordMate II Legrand C Wireway Inside Elbow CordMate II Legrand C Wireway Outside Elbow CordMate II Legrand C59 Joint Cover Channel Coupling
For making a 90 degree turn around an inside corner from wall-to-wall or wall-to-ceiling. For making a 90 degree turn around an outside corner. Joins channels that hide and organize loose cords and wires. UL Listed.
CordMate II Legrand C 3-Way Standard T-Fitting Thomas And Betts Z703 1 1/4-10 Superstrut Superstrut 200 Flat Straight Bracket Splice Plate 7-1/4 in L
For installation requiring 3-way branching including 90-degree angle. Pipe straps hold conduit and pipes in channel. They are inserted along the slot side of the channel and twisted into place. Pre-assembled with locking slot / hex head bolt. Gold-galvanized corrosion free finish. Splices and supports conduit.
Gardner Bender GGS-1512R Ground Screw Thomas And Betts Z703 1-25 Carlon LN43DA-CTN Liquidtight Straight Angle Conduit Connector
Green round washer head screw for switch and outlet boxes. Pipe straps hold conduit and pipes in channel. They are inserted along the slot side of the channel and twisted into place. Pre-assembled with locking slot / hex head bolt. Gold-galvanized corrosion free finish. For flexible conduit. Non-metallic/non-conductive, corrosion resistant plastic.
Carlon E977LC-CAR Conduit Clamp Thomas And Betts Z702 21/2EG-10 Superstrut Pipe Clamp Halex 26163 2-Hole Snap-On Conduit Strap
Offers same chemical resistance as Carlon nonmetallic conduit for a complete, corrosion resistant system. UV resistant for use in direct sunlight. Use in accordance with conduit spacing requirements per NEC. Each clamp requires 2 screws, 2 nuts, and 2 washers. Gray clamps for standard conduit. Pipe straps hold conduit and pipes in channel. They are inserted along the slot side of the channel and twisted into place. Pre-assembled with locking slot / hex head bolt. To support EMT conduit where greater load bearing is required. Indoor or outdoor applications.
Thomas & Betts E977FC-CTN 2-Hole Conduit Clamp Halex 26126 2-Hole Conduit Strap Thomas And Betts Z500-25 Superstrut Beam Clamp
Offers same chemical resistance as Carlon nonmetallic conduit for a complete, corrosion resistant system. UV resistant for use in direct sunlight. Use in accordance with conduit spacing requirements per NEC. Each clamp requires 2 screws, 2 nuts, and 2 washers. Gray clamps for standard conduit. Indoor or outdoor use. Use to secure Rigid or IMC conduit to wood, masonry or similar surfaces where greater load bearing is required. UL Listed, CSA Approved. For hanging rod, silver electroplated finish.
Superstrut 200 Series Angle Bracket Fitting Thomas And Betts Z703 1 1/2-10 Superstrut STRAP CBL 1HOLE OVAL SRVC ENT
For use in metal framing applications. Manufactured from hot rolled carbon steel. Pipe straps hold conduit and pipes in channel. They are inserted along the slot side of the channel and twisted into place. Pre-assembled with locking slot / hex head bolt. Gold-galvanized corrosion free finish. Indoors or outdoors. Steel, use to secure service entrance cable (SEU, SER) to wood, masonry or similar surface.
Eritech CP58 Acorn Standard Duty Ground Clamp Gardner Bender GCC-310 2-Hole Conduit Strap Halex 26154 1-Hole Snap-On Conduit Strap
Connects grounding wire to the grounding rod. UL and CSA Listed for 1/2" and 5/8" ground rods and number 4 rebar and accept a conductor range from number 10 solid to number 2 stranded. Heavy-duty polyethylene, resists deterioration from UV rays and breakage from extreme cold. Enables secure fastening of plastic electrical conduit, schedule 40 PVC, copper tubing. Indoor or outdoor applications. To support EMT conduit.
Thomas And Betts Z702 3EG-10 Superstrut Halex 93591 Ground Clamp Halex 67860 Conduit Hanger
Pipe straps hold conduit and pipes in channel. They are inserted along the slot side of the channel and twisted into place. Pre-assembled with locking slot / hex head bolt. Connects grounding wire to the grounding rod. Use to secure and suspend conduit from overhead supports. Comes with a nut and bolt.
Halex 26156 1-Hole Snap-On Conduit Strap Gardner Bender GGC-1508 Ground Clip Halex 26166 2-Hole Snap-On Conduit Strap
Indoor or outdoor applications. To support EMT conduit. For aluminum or copper grounding wire zinc plated. To support EMT conduit where greater load bearing is required. Indoor or outdoor applications.
Eritech ZWP1J Grounding Pipe Clamp Carlon LN43EA-CTN Liquidtight Straight Angle Conduit Connector Thomas & Betts E977GC-CTN 2-Hole Conduit Clamp
Bolted water pipe clamps made of zinc die-cast. Wire range 8 sol. - 2 str. UL Listed. Connects grounding wire to the grounding rod. For flexible conduit. Non-metallic/non-conductive, corrosion resistant plastic. Offers same chemical resistance as Carlon nonmetallic conduit for a complete, corrosion resistant system. UV resistant for use in direct sunlight. Use in accordance with conduit spacing requirements per NEC. Each clamp requires 2 screws, 2 nuts, and 2 washers. Gray clamps for standard conduit.
Halex 61230 2-Hole Conduit Strap Gardner Bender GGP-1502 Grounding Pigtail Halex 26164 2-Hole Snap-On Conduit Strap
Indoor or outdoor use. Use to secure Rigid or IMC conduit to wood, masonry or similar surfaces where greater load bearing is required. UL Listed, CSA Approved. AWG solid number 12 wire. 8" long with captured screw, other end bare fork terminal. To support EMT conduit where greater load bearing is required. Indoor or outdoor applications.
Carlon Carflex LN20DA-CTN Liquidtight Conduit Elbow Gardner Bender GCC-410 2-Hole Conduit Strap Halex Straight Liquid Tight Connector
For flexible conduit. Non-metallic, Non-conductive, corrosion resistant plastic. Heavy-duty polyethylene, resists deterioration from UV rays and breakage from extreme cold. Enables secure fastening of plastic electrical conduit, schedule 40 PVC, copper tubing. Fitting will not rust or corrode. No disassembly required. Reusable, hand tightened nut. Use to connect type B non-metallic liquid-tight conduit to a weatherproof outlet box, pool/spa equipment motor, central air conditioning unit or various other electrical enclosures or hubs. UL Approved.
Superstrut 200 Flat Right Angle Bracket Corner Plate Legrand NM7 Nonmetallic Raceway Inside Elbow Legrand NM8 Nonmetallic Raceway Outside Elbow
Splices and supports conduit. For making a 90 degree inside turn around a corner from wall-to-wall or wall-to-ceiling. For making a 90 degree outside turn around a corner.
Wiremold NM910 Connection Cover CordMate Legrand NM Raceway Wireway Inside Elbow Legrand NMW910 Raceway Accessory Pack
Mounting components for NMI wire channel, including screws and anchors, wire clips and joint cover. For making a 90 degree inside turn around a corner from wall-to-wall or wall-to-ceiling. Mounting components for NMI wire channel, including screws and anchors, wire clips and joint cover.
CordMate Legrand NM Raceway Wireway Outside Elbow Halex 91625 Multi-Piece Liquid Tight Compression Connector Superstrut 200 Series Flat Straight Bracket
For making a 90 degree outside turn around a corner. Zinc die cast. Use to connect liquid-tight conduit to a steel outlet box, metal enclosure or hub. UL Approved. Splices and supports conduit.
Gardner Bender 14-GRC Ground Clamp Thomas & Betts E977HC-CTN 2-Hole Conduit Clamp Fishock GRC-FS Ground Clamp
Connects grounding wire to the grounding rod. Offers same chemical resistance as Carlon nonmetallic conduit for a complete, corrosion resistant system. UV resistant for use in direct sunlight. Use in accordance with conduit spacing requirements per NEC. Each clamp requires 2 screws, 2 nuts, and 2 washers. Gray clamps for standard conduit. Helps to make a superior connection of ground wire to ground rod. Heavy duty construction for long usage.
Gardner Bender GCC-120 2-Hole Conduit Strap Halex 16205B Multi-Piece Liquid Tight Conduit Connector Gardner Bender GCC-510 2-Hole Conduit Strap
Heavy-duty polyethylene, resists deterioration from UV rays and breakage from extreme cold. Enables secure fastening of plastic electrical conduit, schedule 40 PVC, copper tubing. Multi-piece. Zinc die cast. Use to connect liquid-tight conduit to a steel outlet box or other metal enclosure or hub. UL Listed. Bulk packed. Heavy-duty polyethylene, resists deterioration from UV rays and breakage from extreme cold. Enables secure fastening of plastic electrical conduit, schedule 40 PVC, copper tubing.
Gardner Bender GCC-220 2-Hole Conduit Strap Halex 27621 Multi-Piece Liquid Tight Straight Conduit Connector Halex 36010 Ground Clamp
Heavy-duty polyethylene, resists deterioration from UV rays and breakage from extreme cold. Enables secure fastening of plastic electrical conduit, schedule 40 PVC, copper tubing. Fitting will not rust or corrode. No disassembly required. Reusable, hand tightened nut. Use to connect type B non-metallic liquid-tight conduit to a weatherproof outlet box, pool/spa equipment motor, central air conditioning unit or various other electrical enclosures or hubs. UL Approved. Indoor or outdoor applications. Use to secure the grounding wire to a 1/2" through 1" pipe. UL Listed. Wire size fits #10 - #2 AWG.
Carlon Carflex LN20EA-CTN Liquidtight Conduit Elbow Thomas & Betts E977JCR-CTN 2-Hole Conduit Clamp Superstrut ZCM1001/4-10 Cone Nut
For flexible conduit. Non-metallic, Non-conductive, corrosion resistant plastic. Offers same chemical resistance as Carlon nonmetallic conduit for a complete, corrosion resistant system. UV resistant for use in direct sunlight. Use in accordance with conduit spacing requirements per NEC. Each clamp requires 2 screws, 2 nuts, and 2 washers. Gray clamps for standard conduit. Superstrut Cone Nut, 1/4 in Nominal, Nylon Cone, Steel Nut, Galvanized, Gold, For Superstrut Metal Framing and Hanger System
Hubbell 5320-0 Outlet Box Bell Raco 5320-1 Weatherproof Box Carlon Z703 2 Pipe Clamp
For use in wet, damp or dry locations. Three 1/2" threaded outlets. 2" deep with lugs. May be used as a weatherproof junction box, or as a housing for receptacles, switches, and GFCIs. Powder coat finish. Eight box mounting options with detachable lugs provided. Includes two closure plugs. Ground screw installed. Multi-lingual instructions. Internal threads and hubs comply with NEMA requirements. Hubs accept all threaded fittings and threaded conduit. Die cast aluminum construction. 18.3 cubic inch capacity. 2" depth x 4-1/2" length x 2-3/4" width. UL Listed. NEMA 3R rated. For use in wet, damp or dry locations. Three 1/2" threaded outlets. 2" deep with lugs. May be used as a weatherproof junction box, or as a housing for receptacles, switches, and GFCIs. Powder coat finish. Eight box mounting options with detachable lugs provided. Includes two closure plugs. Ground screw installed. Multi-lingual instructions. Internal threads and hubs comply with NEMA requirements. Hubs accept all threaded fittings and threaded conduit. Die cast aluminum construction. 18.3 cubic inch capacity. 2" depth x 4-1/2" length x 2-3/4" width. UL Listed. NEMA 3R rated. Pipe straps hold conduit and pipes in channel. They are inserted along the slot side of the channel and twisted into place. Pre-assembled with locking slot / hex head bolt. Gold-galvanized corrosion free finish.
Legrand NM11 T-Fitting CordMate Legrand NMW11 3-Way T-Fitting Eritech CWP1J Grounding Pipe Clamp
For branching wire channel in two directions at 90 degree angles. For branching wire channel in two directions at 90 degree angles. Bolted water pipe grounding clamp. UL listed. Made of corrosion-resistant copper alloy.
Gardner Bender GCC-610 2-Hole Conduit Strap Legrand NM6 Nonmetallic Raceway Flat Elbow CordMate Legrand NM Raceway Wireway Flat Elbow
Heavy-duty polyethylene, resists deterioration from UV rays and breakage from extreme cold. Enables secure fastening of plastic electrical conduit, schedule 40 PVC, copper tubing. For making 90 degree right or left turns on a flat surface. For making 90 degree right or left turns on a flat surface.
Hubbell 5320-6 Outlet Box Halex 27622 Multi-Piece Liquid Tight Straight Conduit Connector Bell Raco 5406-0 Weatherproof Extension Box
For use in wet, damp or dry locations. Three 1/2" threaded outlets. 2" deep with lugs. May be used as a weatherproof junction box, or as a housing for receptacles, switches, and GFCIs. Powder coat finish. Eight box mounting options with detachable lugs provided. Includes two closure plugs. Ground screw installed. Multi-lingual instructions. Internal threads and hubs comply with NEMA requirements. Hubs accept all threaded fittings and threaded conduit. Die cast aluminum construction. 18.3 cubic inch capacity. 2" depth x 4-1/2" length x 2-3/4" width. UL Listed. NEMA 3R rated. Fitting will not rust or corrode. No disassembly required. Reusable, hand tightened nut. Use to connect type B non-metallic liquid-tight conduit to a weatherproof outlet box, pool/spa equipment motor, central air conditioning unit or various other electrical enclosures or hubs. UL Approved. Used to provide additional capacity. Die cast aluminum construction. Installation hardware, gasket, and ground screw provided. 9.5 cubic inch capacity. 4-1/2" x 2-3/4" x 1" deep. UL Listed, CSA, NEMA 3R Rated.
Legrand B-8 Metal Raceway Outside Elbow Thomas And Betts ZA1001/4EG-10 Superstrut Bell Raco 5320-2 Weatherproof Box
Used to make a 90 degree outside turn around a corner. For use with 'A' and 'C' series channel and inserts. For use in wet, damp or dry locations. Three 1/2" threaded outlets. 2" deep with lugs. May be used as a weatherproof junction box, or as a housing for receptacles, switches, and GFCIs. Powder coat finish. Eight box mounting options with detachable lugs provided. Includes two closure plugs. Ground screw installed. Multi-lingual instructions. Internal threads and hubs comply with NEMA requirements. Hubs accept all threaded fittings and threaded conduit. Die cast aluminum construction. 18.3 cubic inch capacity. 2" depth x 4-1/2" length x 2-3/4" width. UL Listed. NEMA 3R rated.
Thomas And Betts Z502-10 Superstrut Beam Clamp Halex 93592 Ground Clamp Halex 26141 Flat Drive Strap
For hanging rod, silver electroplated finish. Connects grounding wire to the grounding rod. Indoors or outdoors. To secure EMT conduit to a wood or masonry surface.
Halex 26151 1-Hole Snap-On Conduit Strap Thomas And Betts ZA1003/8EG-10 Superstrut Halex 61130 1-Hole Conduit Strap
Indoor or outdoor applications. To support EMT conduit. For use with 'A' and 'C' series channel and inserts. Steel, indoor or outdoor. Use to secure Rigid or IMC conduit to wood, masonry or similar surfaces where greater load bearing is required. Tray boxed.
Legrand B-6 Metal Raceway Flat Elbow Legrand B-7 Metal Raceway Inside Elbow Halex Liquid Tight Connector
Used to make a 90 degree right or left turn on a flat surface. Used to make a 90 degree inside turn around a corner, from wall-to-wall or wall-to-ceiling. Indoors or outdoors, fitting will not rust or corrode. No disassembly required, just hand-tighten nut. Reusable. Use to connect type B non-metallic liquid-tight conduit to a weatherproof outlet box, pool/spa equipment motor, central air conditioning unit or various other electrical enclosures or hubs. UL Approved.
Halex 27691 Liquid Tight Conduit Elbow Halex 16207B Multi-Piece Liquid Tight Conduit Connector Thomas And Betts ZU501-10 Superstrut Beam Clamp
Indoors or outdoors, fitting will not rust or corrode. No disassembly required, just hand-tighten nut. Reusable. Use to connect type B non-metallic liquid-tight conduit to a weatherproof outlet box, pool/spa equipment motor, central air conditioning unit or various other electrical enclosures or hubs. UL Approved. Multi-piece. Zinc die cast. Use to connect liquid-tight conduit to a steel outlet box or other metal enclosure or hub. UL Listed. Bulk packed. For channel. 3-1/16".
Halex 26152 1-Hole Snap-On Conduit Strap Hubbell 5324-0 Outlet Box Halex 26161 2-Hole Snap-On Conduit Strap
Indoor or outdoor applications. To support EMT conduit. With lugs. Die cast aluminum. For use in branch circuit wiring in wet, damp, or dry locations. May be used as a weatherproof junction box, or as housing for receptacles, switches, and GFCI's. Eight box mounting options with detachable lugs provided. Three threaded 3/4" outlets. Powder coat finish. 18.3 cubic inch capacity. Two closure plugs included. Ground screws installed. Internal threads and hubs comply with NEMA requirements. Hubs accept all threaded fittings and threaded conduit. 2" depth x 4-1/2" length x 2-3/4" width. UL Listed. To support EMT conduit where greater load bearing is required. Indoor or outdoor applications.
Thomas And Betts ZA1001/2EG-10 Superstrut Halex 91627 Multi-Piece Liquid Tight Conduit Connector Hubbell 5321-0 Outlet Box
For use with 'A' and 'C' series channel and inserts. Zinc die cast. Use to connect liquid-tight conduit to a steel outlet box, metal enclosure or hub. UL Approved. Constructed of die-cast aluminum. For use in branch circuit wiring in wet, damp or dry locations. May be used as a weatherproof junction box or as a housing for receptacles, switches, and GFCIs. Reinforced connector outlets. Powder coat finish. Eight box mounting options with detachable lugs provided. Two closure plugs included. Ground screw installed. Four 1/2" threaded outlets. Complies with NEMA requirements. Hubs accept all threaded fittings and threaded conduit. Multi-lingual instructions. 2" depth. 18.3 cubic inch capacity. 4-1/2" length x 2-3/4" width. UL Listed. NEMA 3R rated.
Halex 26250 Concrete Tight Rain Tight Compression Connector Steel City ZCK535-10 Armored Cable Hanger Clip Bell Raco 5320-7 Weatherproof Outlet Box
Concrete-tight and rain-tight. Use to connect EMT conduit to steel outlet box, load center, or other metal enclosure in a wet location. Flexible conduit hanger from drop wire, #8-#12 wire, .433-.535 O.D. cable. For use in wet, damp or dry locations. Three 1/2" threaded outlets. 2" deep with lugs. May be used as a weatherproof junction box, or as a housing for receptacles, switches, and GFCIs. Powder coat finish. Eight box mounting options with detachable lugs provided. Includes two closure plugs. Ground screw installed. Multi-lingual instructions. Internal threads and hubs comply with NEMA requirements. Hubs accept all threaded fittings and threaded conduit. Die cast aluminum construction. 18.3 cubic inch capacity. 2" depth x 4-1/2" length x 2-3/4" width. UL Listed. NEMA 3R rated.
Bell Raco 5320-5 Outlet Box Halex 26162 2-Hole Snap-On Conduit Strap CordMate Legrand C10 Wire Channel
For use in wet, damp or dry locations. Three 1/2" threaded outlets. 2" deep with lugs. May be used as a weatherproof junction box, or as a housing for receptacles, switches, and GFCIs. Powder coat finish. Eight box mounting options with detachable lugs provided. Includes two closure plugs. Ground screw installed. Multi-lingual instructions. Internal threads and hubs comply with NEMA requirements. Hubs accept all threaded fittings and threaded conduit. Die cast aluminum construction. 18.3 cubic inch capacity. 2" depth x 4-1/2" length x 2-3/4" width. UL Listed. NEMA 3R rated. To support EMT conduit where greater load bearing is required. Indoor or outdoor applications. Hides and organizes low voltage loose cords and wires. UL Listed. 1/2" height x 3/8" width x 5' length.
Superstrut 200 Series Square Conduit Washer Halex 36019 Ground Clamp Superstrut 200 Series Square Conduit Washer
GoldGalv finish. Indoor or outdoor applications. Use to secure the grounding wire to a 1/2" through 1" pipe. UL Listed. Wire size fits #10 - #2 AWG. GoldGalv finish.
Steel City R Threaded Rod Carlon Carflex LN43FA-CAR 1-Piece Straight Conduit Connector Bell Raco 5321-2 Weatherproof Box
Framing and hanging applications. Free-running, corrosion resistant, burr-free. For flexible conduit. Non-metallic/non-conductive, corrosion resistant plastic. Constructed of die-cast aluminum. For use in branch circuit wiring in wet, damp or dry locations. May be used as a weatherproof junction box or as a housing for receptacles, switches, and GFCIs. Reinforced connector outlets. Powder coat finish. Eight box mounting options with detachable lugs provided. Two closure plugs included. Ground screw installed. Four 1/2" threaded outlets. Complies with NEMA requirements. Hubs accept all threaded fittings and threaded conduit. Multi-lingual instructions. 2" depth. 18.3 cubic inch capacity. 4-1/2" length x 2-3/4" width. UL Listed. NEMA 3R rated.
Halex 16905B Multi-Piece Liquid Tight Conduit Elbow Bell Raco 5321-1 Weatherproof Box Halex 26142 Flat Drive Strap
Multi-piece, zinc die cast. Use to connect liquid-tight conduit to a steel outlet box or other metal enclosure or hub. UL Listed. Constructed of die-cast aluminum. For use in branch circuit wiring in wet, damp or dry locations. May be used as a weatherproof junction box or as a housing for receptacles, switches, and GFCIs. Reinforced connector outlets. Powder coat finish. Eight box mounting options with detachable lugs provided. Two closure plugs included. Ground screw installed. Four 1/2" threaded outlets. Complies with NEMA requirements. Hubs accept all threaded fittings and threaded conduit. Multi-lingual instructions. 2" depth. 18.3 cubic inch capacity. 4-1/2" length x 2-3/4" width. UL Listed. NEMA 3R rated. Indoors or outdoors. To secure EMT conduit to a wood or masonry surface.
Eritech CWP1JU Grounding Pipe Clamp Legrand NMW17 Raceway Conduit Connector Wiremold Raceway On-Wall Mount Conduit Connector
Bolted water pipe clamps made from high-strength corrosion-resistant copper alloy. Connects grounding wire to the grounding rod. Range 10 solid - 2 stranded. UL Listed. For transitioning from nonmetallic raceway to conduit. Hides and organizes loose cords and wires. For transitioning from nonmetallic raceway to conduit. Hides and organizes loose cords and wires.
Carlon E977DC25-UPC Conduit Clamp Bell Raco 5322-0 Weatherproof Box Thomas & Betts E977NDC-CTN 1-Piece Conduit Clamp
Offers same chemical resistance as Carlon nonmetallic conduit for a complete, corrosion resistant system. UV resistant for use in direct sunlight. Use in accordance with conduit spacing requirements per NEC. Each clamp requires 2 screws, 2 nuts, and 2 washers. Gray clamps for standard conduit. Weatherproof box, with lugs. Five 1/2" threaded outlets. For use in branch circuit wiring in wet, damp or dry locations. May be used as a weatherproof junction box or as a housing for receptacles, switches and GFCIs. Die cast aluminum construction. Reinforced connector outlets. Powder coat finish. Eight box mounting options with detachable lugs provided. Two closure plugs included. Ground screw installed. Internal threads and hubs comply with NEMA requirements. Hubs accept all threaded fittings and threaded conduit. Multi-lingual instructions. 2" depth x 4-1/2" length x 2-3/4" width. 18.3 cubic inch capacity. UL Listed. CSA 22.2 No. 18 NEMA 3R Rated. Drill  5/16'' hole with masonry bit and tap in with hammer.
Bell Raco 5321-5 Weatherproof Outlet Box Hubbell 5361-0 Splice Box Spot-Gro 5330-0 Weatherproof Box
Constructed of die-cast aluminum. For use in branch circuit wiring in wet, damp or dry locations. May be used as a weatherproof junction box or as a housing for receptacles, switches, and GFCIs. Reinforced connector outlets. Powder coat finish. Eight box mounting options with detachable lugs provided. Two closure plugs included. Ground screw installed. Four 1/2" threaded outlets. Complies with NEMA requirements. Hubs accept all threaded fittings and threaded conduit. Multi-lingual instructions. 2" depth. 18.3 cubic inch capacity. 4-1/2" length x 2-3/4" width. UL Listed. NEMA 3R rated. For use in branch circuit wiring in wet, damp, or dry locations. Designed for use as a weatherproof junction box, and used with Bell round cluster covers and round lampholder combinations. Die cast aluminum construction. Powder coat finish. Reinforced connector outlets. Cast-in mounting lugs, four closure plugs included, and installed ground screw. 16.1 cubic inch capacity. Six 10-24 tapped holes. 4" diameter x 1-1/2" depth. UL Listed. With lugs. Die cast aluminum. For use in branch circuit wiring in wet, damp, or dry locations. May be used as a weatherproof junction box, or as housing for receptacles, switches, and GFCI's. Eight box mounting options with detachable lugs provided. Powder coat finish. 16.5 cubic inch capacity. Two closure plugs included. Ground screw installed. Internal threads and hubs comply with NEMA requirements. Hubs accept all threaded fittings and threaded conduit. 2" depth x 4-1/2" length x 2-3/4" width. UL Listed. Shrink wrapped.
Bell Raco 5324-5 Outlet Box Thomas & Betts E977NEC-CTN 1-Piece Conduit Clamp Superstrut ZCM1003/8-10 Cone Nut
With lugs. Die cast aluminum. For use in branch circuit wiring in wet, damp, or dry locations. May be used as a weatherproof junction box, or as housing for receptacles, switches, and GFCI's. Eight box mounting options with detachable lugs provided. Three threaded 3/4" outlets. Powder coat finish. 18.3 cubic inch capacity. Two closure plugs included. Ground screws installed. Internal threads and hubs comply with NEMA requirements. Hubs accept all threaded fittings and threaded conduit. 2" depth x 4-1/2" length x 2-3/4" width. UL Listed. Drill  5/16'' hole with masonry bit and tap in with hammer. Superstrut Cone Nut, 3/8 in Nominal, Nylon Cone, Steel Nut, Galvanized, Gold, For Superstrut Metal Framing and Hanger System
Thomas And Betts Z503-5 Superstrut Beam Clamp Thomas & Betts E381DR Type T Weatherproof Switch Box Legrand B-1 Wire Channel
For hanging rod, silver electroplated finish. Weatherproof, for use with nonmetalic wiring systems. Nonconductive, noncorrosive, and impact resistant for a safe, long, service-free life in exposed applications. Install in accordance with NEC and local codes. Three 1/2" threaded ports, one on each end and one in the back. UL Listed. Metal surface mount, for wall or ceiling use. 5' length x 3/4" height x 17/32" width. Use to protect cords.
Superstrut ZCM1001/2-10 Cone Nut Hubbell 5361-6 Splice Box Halex 91695 Multi-Piece Liquid Tight Conduit Elbow
Superstrut Cone Nut, 1/2 in Nominal, Nylon Cone, Steel Nut, Galvanized, Gold, For Superstrut Metal Framing and Hanger System For use in branch circuit wiring in wet, damp, or dry locations. Designed for use as a weatherproof junction box, and used with Bell round cluster covers and round lampholder combinations. Die cast aluminum construction. Powder coat finish. Reinforced connector outlets. Cast-in mounting lugs, four closure plugs included, and installed ground screw. 16.1 cubic inch capacity. Six 10-24 tapped holes. 4" diameter x 1-1/2" depth. UL Listed. Multi-piece, zinc die cast. Use to connect liquid-tight conduit to a steel outlet box or other metal enclosure or hub. UL Listed.
Legrand NM Outlet Box Carlon E977EC20-UPC Conduit Clamp Wiremold NMW2 Starter Box
Fits over existing single gang outlet to feed power as the starting point for your system. 1" deep. Offers same chemical resistance as Carlon nonmetallic conduit for a complete, corrosion resistant system. UV resistant for use in direct sunlight. Use in accordance with conduit spacing requirements per NEC. Each clamp requires 2 screws, 2 nuts, and 2 washers. Gray clamps for standard conduit. Fits over existing single gang outlet to feed power as the starting point for your system. 1" deep.
Wiremold B81 Metal Raceway Box Connector Halex 27692 Liquid Tight Conduit Elbow Legrand B-16 T-Fitting
For connecting raceway to conduit boxes with 1/2" knockout. Indoors or outdoors, fitting will not rust or corrode. No disassembly required, just hand-tighten nut. Reusable. Use to connect type B non-metallic liquid-tight conduit to a weatherproof outlet box, pool/spa equipment motor, central air conditioning unit or various other electrical enclosures or hubs. UL Approved. Hides and organizes loose cords and wires.
Bell Raco 5331-0 Weatherproof Box Legrand CordMate II C53 Datacom Box Halex 63299 Ground Screw
With lugs. Die cast aluminum. For use in branch circuit wiring in wet, damp, or dry locations. May be used as a weatherproof junction box, or as housing for receptacles, switches, and GFCI's. Eight box mounting options with detachable lugs provided. Five 3/4" threaded outlets. Powder coat finish. 18.3 cubic inch capacity. Two closure plugs included. Ground screws installed. Internal threads and hubs comply with NEMA requirements. Hubs accept all threaded fittings and threaded conduit. 2" depth x 4-1/2" length x 2-3/4" width. UL Listed, CSA Approved and NEMA 3R Rated. For mounting phone, fax, cable and audio connections (not for power). Paintable with a latex base paint. Simple to use, just peel off self-adhesive backing. Indoor or outdoor applications. Use to ground a wiring device to a steel outlet box. Green color.
Legrand NM Deep Outlet Box Wiremold NMW3 Outlet Box Steel City R Threaded Rod
For installing dimmer switches as well as standard size switches and outlets. 1-7/16" length x 1-3/8" depth. For installing dimmer switches as well as standard size switches and outlets. 1-7/16" length x 1-3/8" depth. Framing and hanging applications. Free-running, corrosion resistant, burr-free.
Hubbell 5323-0 Outlet Box Legrand NMW Extra Deep Outlet Box Legrand NM Extra Deep Outlet Box
With lugs. Die cast aluminum. For use in branch circuit wiring in wet, damp, or dry locations. May be used as a weatherproof junction box, or as housing for receptacles, switches, and GFCIs. 5 reinforced 1/2" threaded connector outlets. Powder coat finish. Two closure plugs included. Ground screws installed. Internal threads and hubs comply with NEMA requirements. 2" depth x 4-1/2" length x 2-3/4" width. 18.3 cubic inch capacity. UL Listed. For installing speed controls for ceiling fans dimmer switches, standard switches and outlets. 1-3/4" deep. For installing speed controls for ceiling fans dimmer switches, standard switches and outlets. 1-3/4" deep.
Halex 61212B 2-Hole Conduit Strap Bell Raco 5361-2 Splice Box Bell Raco 5361-1 Single Ended Splice Box
Indoor or outdoor use. Use to secure Rigid or IMC conduit to wood, masonry or similar surfaces where greater load bearing is required. UL Listed, CSA Approved. For use in branch circuit wiring in wet, damp, or dry locations. Designed for use as a weatherproof junction box, and used with Bell round cluster covers and round lampholder combinations. Die cast aluminum construction. Powder coat finish. Reinforced connector outlets. Cast-in mounting lugs, four closure plugs included, and installed ground screw. 16.1 cubic inch capacity. Six 10-24 tapped holes. 4" diameter x 1-1/2" depth. UL Listed. For use in branch circuit wiring in wet, damp, or dry locations. Designed for use as a weatherproof junction box, and used with Bell round cluster covers and round lampholder combinations. Die cast aluminum construction. Powder coat finish. Reinforced connector outlets. Cast-in mounting lugs, four closure plugs included, and installed ground screw. 16.1 cubic inch capacity. Six 10-24 tapped holes. 4" diameter x 1-1/2" depth. UL Listed.
Eritech 811260UPC Grounding Rod Bell Raco 5361-7 Splice Box Raco 5372-0 Weatherproof Splice Box
Zinc-coated exteriors are hot-dip galvanized for solid protection against corrosion in accordance with ASTM specification A153-78. Surfaces are rigidly inspected to eliminate seams, slivers and other defects. Meet EEI-NEMA TDJ-30 and are REA listed. 15 year service life in most soils. Galvanized plated steel. For use in branch circuit wiring in wet, damp, or dry locations. Designed for use as a weatherproof junction box, and used with Bell round cluster covers and round lampholder combinations. Die cast aluminum construction. Powder coat finish. Reinforced connector outlets. Cast-in mounting lugs, four closure plugs included, and installed ground screw. 16.1 cubic inch capacity. Six 10-24 tapped holes. 4" diameter x 1-1/2" depth. UL Listed. For use in branch circuit wiring in wet, damp, or dry locations. Designed for use as a weatherproof junction box, and used with Bell round cluster covers and round lampholder combinations. Die cast aluminum construction. Powder coat finish. Reinforced connector outlets. Cast-in mounting lugs, four closure plugs included, and installed ground screw. 4" diameter x 1-1/2" depth. UL Listed. NEMA 3R Rated.
Hubbell 5361-5 Splice Box Legrand B5 Starter Box Wiremold B-17 Raceway Combination Connector
For use in branch circuit wiring in wet, damp, or dry locations. Designed for use as a weatherproof junction box, and used with Bell round cluster covers and round lampholder combinations. Die cast aluminum construction. Powder coat finish. Reinforced connector outlets. Cast-in mounting lugs, four closure plugs included, and installed ground screw. 16.1 cubic inch capacity. Six 10-24 tapped holes. 4" diameter x 1-1/2" depth. UL Listed. For installing speed controls for ceiling fans dimmer switches, standard switches and outlets. 1" deep. Metal raceway. For transitioning from metal raceway to 1/2" conduit or from any steel box with 1/2" knockout.
Eritech EK17 Direct Burial Perpendicular Ground Clamp Eritech EK16 Direct Burial Ground Clamp Wiremold B-9-10-11 Wire Channel Accessories
Bronze alloy grounding clamp with bronze screws. Used for rebar, ground rods, water pipes and direct-burial water pipe. Lay-in feature cuts installation time. Approved for direct burial in earth and concrete. Pipe range from 1/2" (12.7 mm) to 1" (25.4 mm). Rebar range from #4 (10 mm) to #8 (25 mm). Ground rod range from 1/2" (12.7 mm) to 1" (25.4 mm). Conductor range from #10 (5.5 mm sq) to #2 (25 mm sq). UL listed. Bronze alloy grounding clamp with bronze screws. Used for rebar, ground rods, water pipes and direct-burial water pipe. Lay-in feature cuts installation time. Approved for direct burial in earth and concrete. Pipe range from 1/2" (12.7 mm) to 1" (25.4 mm). Rebar range from #4 (10 mm) to #8 (25 mm). Ground rod range from 1/2" (12.7 mm) to 1" (25.4 mm). Conductor range from #10 (5.5 mm sq) to #2 (25 mm sq). UL listed. Use to provide easy access to connections.
Legrand NMW2S Switch Kit Wiremold NMW2D Outlet Box Duplex Switch Halex 61205B 2-Hole Conduit Strap
For most residential wiring. For most residential wiring. Indoor or outdoor use. Use to secure Rigid or IMC conduit to wood, masonry or similar surfaces where greater load bearing is required. UL Listed, CSA Approved.
Halex 36020 Ground Clamp Legrand B2 Deep Outlet Box Legrand NMW1 Raceway Wire Channel
Wire size fits #10 - #2 AWG. Use to secure the grounding wire to a 1-1/4" - 2" or 2-1/2" - 4" pipe. Bronze. UL Listed. For most residential wiring devices. For installing a shallow switch or outlet. 1" deep. Carries wire from starter box to downstream outlet boxes, switches and fixtures. 5' length x 1-5/16" width x 7/16" height.
Halex 61615B 2-Hole Snap-On Conduit Strap Legrand NM1 Nonmetallic Raceway Wire Channel Thomas & Betts E365DR Type T Switch Box
To support EMT conduit where greater load bearing is required. Indoor or outdoor applications. Carries wire from starter box to downstream outlet boxes, switches and fixtures. 5' length x 1-5/16" width x 7/16" height. Nonmetallic threaded switch box with five 1/2" threaded holes, for exposed applications with nonmetallic wiring systems only. Mounting feet included. 4" diameter. 13.5 cubic inch capacity.
Bell 5400-0 Extension Adapter Energizer NH15BP-2 Rechargeable Battery Energizer NH12BP-2 Rechargeable Battery
Used to provide additional capacity needed for NEC box fill requirements. Die cast aluminum construction. 6 threaded 1/2" outlets. Installation hardware gasket and 1/2" closure plugs included. Ground screw is provided. Internal threads and hubs comply with NEMA requirements. Hubs accept all threaded 1/2" fittings and threaded conduit. 5-1/4" length x 3-1/2" width x 1-1/2" depth. UL Listed. NEMA 3R Rated. Plastic label jacket, 1.2 volt. For high drain devices such as digital cameras, CD players, toys and games. High energy, comes charged from the factory, ready to use. Recharges up to 700 times. Carded. Plastic label jacket, 1.2 volt. For high drain devices such as digital cameras, CD players, toys and games. High energy, comes charged from the factory, ready to use. Recharges up to 700 times. Carded.
Halex 16210B Multi-Piece Liquid Tight Conduit Connector Legrand B3 Deep Outlet Box Legrand B2S Switch Kit
Multi-piece. Zinc die cast. Use to connect liquid-tight conduit to a steel outlet box or other metal enclosure or hub. UL Listed. Bulk packed. For installing a deep-dimensioned box for dimmers, speed control switches and other devices. 1-3/8" deep. For most residential wiring.
Wiremold B2D Outlet Box Duplex Switch Erico 815860UPC Grounding Rods Legrand B35 Extra Deep Outlet Box
For most residential wiring. Zinc-coated exteriors are hot-dip galvanized for solid protection against corrosion in accordance with ASTM specification A153-78. Surfaces are rigidly inspected to eliminate seams, slivers and other defects. Meet EEI-NEMA TDJ-30 and are REA listed. 15 year service life in most soils. Galvanized plated steel. For oversized wiring devices such as fan speed controls, dimmer switches and GFCIs. 1-3/4" deep.
Halex 16907B Multi-Piece Liquid Tight Conduit Elbow Eritech 615840UPC Grounding Rod Halex 91697 Multi-Piece Liquid Tight Conduit Elbow
Multi-piece, zinc die cast. Use to connect liquid-tight conduit to a steel outlet box or other metal enclosure or hub. UL Listed. Copperbonded, resists corrosion better than galvanized rods, allowing for a 30-year service life in most soils. Uniform plating thickness, average tensile strength of 80,000 psi and straightness tolerance of .010" per linear foot. Exceeds the requirements of ANSI/UL 467-1984, CSA, and ANSI/NEMA GR-1. Indoors or outdoors. Multi-piece, use to connect flexible metallic or type B non-metallic liquid-tight conduit to a steel outlet box, metal enclosure or hub.
Halex 61505B 1-Hole Snap-On Cable Strap Legrand NM Outlet Box Halex 61215B 2-Hole Conduit Strap
Indoor or outdoor applications. To support EMT conduit. Expanded capacity for extra outlets or outlet/switch combinations. 4-3/4" x 4-7/8 x 1-3/8" deep. Indoor or outdoor use. Use to secure Rigid or IMC conduit to wood, masonry or similar surfaces where greater load bearing is required. UL Listed, CSA Approved.
CornerMate Legrand C40 Wire Channel Legrand B13-14 Metal Raceway Twist Elbow Duracell 66158 Rechargeable Battery
Hides home audio/home theater cords that typically run in corners. Easy peel and press installation. Reversible cover for concave or convex profile. Paintable to match wall colors. For making a 90 degree turn around an outside corner while changing channel orientation. Precharged, staycharged, rechargeable batteries. Rechargeable up to 400 times.
Duracell 66153 Rechargeable Battery Arrow Hart 1113-SP 3-Hole Weatherproof Outlet Box Halex 61605B 2-Hole Snap-On Conduit Strap
Precharged, staycharged, rechargeable batteries. Rechargeable up to 400 times. Electrostatically painted with a baked, weather-resistant powder finish. Accept single gang weatherproof covers and standard FS covers. Mounting lugs provide strength and durability on any mounting surface. Raised knockout studs on back of box provide alternative means for wall mounting. Strike desired studs with sharp hammer blow for clean mounting holes. Ground screw hole located inside back wall of box. Threaded outlets for conduit and connectors. Two closure plugs and mounting lugs furnished. Three holes, one at each end and one on the back. 2" depth x 2.812" width x 4.562" length. UL Listed. Carded. To support EMT conduit where greater load bearing is required. Indoor or outdoor applications.
Carlon Carflex LT43G Liquid Tight Straight Conduit Connector Thomas & Betts E382DE Type T Threaded Switch Box Carlon LN20FA-CAR 1-Piece Liquid Tight Conduit Elbow