Home > PLUMBING > KITCHEN & BATH > FIXTURES > VANITY TOPS
Sort By:
1
Carlon E940D-CTN Standard Conduit Coupling Carlon E943D-CTN Terminal Adapter Carlon E940E-CTN/CAR Standard Conduit Coupling
Safe, non-conductive. Schedule 40 non-metallic socket type coupling for joining Schedule 40 non-metallic conduit. Will not rust or corrode. RoHS Compliance, UL Listed. Safe, non-conductive. For adapting schedule 40 non-metallic conduit to boxes, threaded fittings, metallic systems. Male threads on one end, socket end on the other. Will not rust or corrode. UL Listed, RoHS Compliance. Safe, non-conductive. Schedule 40 non-metallic socket type coupling for joining Schedule 40 non-metallic conduit. Will not rust or corrode. RoHS Compliance, UL Listed.
Carlon E942DR-CTN Conduit Adapter Halex 71205B 2-Hole Conduit Strap Carlon E942ER-CTN Conduit Adapter
Safe, non-conductive. For adapting Schedule 40 non-metallic conduit to boxes, threaded fittings, metallic systems. Female threads one end, socket end on the other. Will not rust or corrode. Indoor or outdoor applications. Use to secure PVC conduit to wood, masonry or similar surface. Bulk packed. Safe, non-conductive. For adapting Schedule 40 non-metallic conduit to boxes, threaded fittings, metallic systems. Female threads one end, socket end on the other. Will not rust or corrode.
Carlon E940FR-CTN Standard Conduit Coupling Carlon E943E-CTN Terminal Adapter Halex 61612B 2-Hole Snap-On Conduit Strap
Safe, non-conductive. Schedule 40 non-metallic socket type coupling for joining Schedule 40 non-metallic conduit. Will not rust or corrode. RoHS Compliance, UL Listed. Safe, non-conductive. For adapting schedule 40 non-metallic conduit to boxes, threaded fittings, metallic systems. Male threads on one end, socket end on the other. Will not rust or corrode. UL Listed, RoHS Compliance. To support EMT conduit where greater load bearing is required. Indoor or outdoor applications.
Carlon E943FR-CTN Terminal Adapter Halex 71210B 2-Hole Conduit Strap Halex 71212B 2-Hole Conduit Strap
Safe, non-conductive. For adapting schedule 40 non-metallic conduit to boxes, threaded fittings, metallic systems. Male threads on one end, socket end on the other. Will not rust or corrode. UL Listed, RoHS Compliance. Indoor or outdoor applications. Use to secure PVC conduit to wood, masonry or similar surface. Bulk packed. Indoor or outdoor applications. Use to secure PVC conduit to wood, masonry or similar surface. Bulk packed.
Halex 96163 2-Hole Snap-On Conduit Strap Carlon E996DR-CTN Conduit Box Adapter Carlon Snap Strap E978DC-CAR 1-Hole Single Conduit Strap
To support EMT conduit where greater load bearing is required. Indoor or outdoor applications. For PVC enclosures. cULus Listed. Safe, non-conductive. To be used in accordance with NEC, Article 347.8 conduit spacing requirements. For use with Schedule 40/80 non-metallic solvent weld fittings.
Carlon E940GR-CTN Standard Conduit Coupling Halex 71215B 2-Hole Conduit Strap Carlon E942FR-CTN Conduit Adapter
Safe, non-conductive. Schedule 40 non-metallic socket type coupling for joining Schedule 40 non-metallic conduit. Will not rust or corrode. RoHS Compliance, UL Listed. Indoor or outdoor applications. Use to secure PVC conduit to wood, masonry or similar surface. Bulk packed. Safe, non-conductive. For adapting Schedule 40 non-metallic conduit to boxes, threaded fittings, metallic systems. Female threads one end, socket end on the other. Will not rust or corrode.
Carlon UA9ADB-CTN Standard Radius Rigid Conduit Elbow Carlon E996ER-CTN Conduit Box Adapter Carlon Snap Strap E978EC-CAR 1-Hole Single Conduit Strap
For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant. Schedule 40. UL 651 Listed to the NEC by the ETL, UL Listed. For PVC enclosures. cULus Listed. Safe, non-conductive. To be used in accordance with NEC, Article 347.8 conduit spacing requirements. For use with Schedule 40/80 non-metallic solvent weld fittings.
Carlon UA9ADR-CTN Standard Radius Conduit Elbow Carlon E940HR-CTN Standard Conduit Coupling Carlon E943GR-CTN Terminal Adapter
For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant. Safe, non-conductive. Schedule 40 non-metallic socket type coupling for joining Schedule 40 non-metallic conduit. Will not rust or corrode. RoHS Compliance, UL Listed. Safe, non-conductive. For adapting schedule 40 non-metallic conduit to boxes, threaded fittings, metallic systems. Male threads on one end, socket end on the other. Will not rust or corrode. UL Listed, RoHS Compliance.
Carlon UA7ADB-CTN Standard Radius Conduit Elbow Carlon UA9AER-CTN Standard Radius Conduit Elbow Halex 96111 1-Hole Conduit Strap
For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant. UL Listed E35297. For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant. Indoor or outdoor applications. Use to secure Rigid or I.M.C. conduit to wood, masonry or similar surfaces.
Halex 61220B 2-Hole Conduit Strap Carlon UA7ADR-CAR Standard Radius Conduit Elbow Carlon E943HR-CTN Terminal Adapter
Indoor or outdoor use. Use to secure Rigid or IMC conduit to wood, masonry or similar surfaces where greater load bearing is required. UL Listed, CSA Approved. For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant. UL Listed E35297. Safe, non-conductive. For adapting schedule 40 non-metallic conduit to boxes, threaded fittings, metallic systems. Male threads on one end, socket end on the other. Will not rust or corrode. UL Listed, RoHS Compliance.
Carlon UA9AEB-CTN Standard Radius Rigid Conduit Elbow Carlon E942GR-CTN Conduit Adapter Thomas & Betts E950ED-CTN Reducing Bushing
For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant. Schedule 40. UL 651 Listed to the NEC by the ETL, UL Listed. Safe, non-conductive. For adapting Schedule 40 non-metallic conduit to boxes, threaded fittings, metallic systems. Female threads one end, socket end on the other. Will not rust or corrode. For connecting different sizes of conduit. Socket both ends, for reducing male Schedule 40/80 conduit runs or fittings to female. Non-conductive. Will not rust or corrode.
Halex 96560 Beam Clamp Halex 71220B 2-Hole Conduit Strap Carlon Snap Strap E978FC-CAR 1-Hole Single Conduit Strap
Use to secure conduit to a metal beam. Clamps on beam, girder or similar structure to provide a mounting base for attachment of a conduit hanger, either directly or by means of a threaded rod. Eliminates need to drill hole through beam. Indoor or outdoor applications. Use to secure PVC conduit to wood, masonry or similar surface. Bulk packed. Safe, non-conductive. To be used in accordance with NEC, Article 347.8 conduit spacing requirements. For use with Schedule 40/80 non-metallic solvent weld fittings.
Carlon UA7AER-CAR Standard Radius Conduit Elbow Halex 96121 2-Hole Conduit Strap Carlon E940JR-CTN Standard Conduit Coupling
For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant. UL Listed E35297. Indoor or outdoor use. Use to secure Rigid or IMC conduit to wood, masonry or similar surfaces where greater load bearing is required. UL Listed, CSA Approved. Safe, non-conductive. Schedule 40 non-metallic socket type coupling for joining Schedule 40 non-metallic conduit. Will not rust or corrode. RoHS Compliance, UL Listed.
Carlon E942HR Conduit Adapter Thomas & Betts E977DC-CTN 2-Hole Conduit Clamp Halex 96151 1-Hole Snap-On Conduit Strap
Safe, non-conductive. For adapting Schedule 40 non-metallic conduit to boxes, threaded fittings, metallic systems. Female threads one end, socket end on the other. Will not rust or corrode. Offers same chemical resistance as Carlon nonmetallic conduit for a complete, corrosion resistant system. UV resistant for use in direct sunlight. Use in accordance with conduit spacing requirements per NEC. Each clamp requires 2 screws, 2 nuts, and 2 washers. Gray clamps for standard conduit. Indoor or outdoor applications. To support EMT conduit.
Carlon UA7AEB-CTN Standard Radius Conduit Elbow Halex 96780 Conduit Hanger Halex 96161 2-Hole Snap-On Conduit Strap
For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant. UL Listed E35297. Use to secure and suspend conduit from overhead supports. Comes with a nut and bolt. To support EMT conduit where greater load bearing is required. Indoor or outdoor applications.
Halex 96112 1-Hole Conduit Strap Halex 96213 1-Hole Cable Strap Halex 96781 Conduit Hanger
Indoor or outdoor applications. Use to secure Rigid or I.M.C. conduit to wood, masonry or similar surfaces. Steel, use to secure BX cable to wood, masonry or similar surface. Use to secure and suspend conduit from overhead supports. Comes with a nut and bolt.
Carlon UA9AFR-CTN Standard Radius Conduit Elbow Thomas & Betts E977EC-CTN 2-Hole Conduit Clamp Carlon E943JRR Terminal Adapter
For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant. Offers same chemical resistance as Carlon nonmetallic conduit for a complete, corrosion resistant system. UV resistant for use in direct sunlight. Use in accordance with conduit spacing requirements per NEC. Each clamp requires 2 screws, 2 nuts, and 2 washers. Gray clamps for standard conduit. Safe, non-conductive. For adapting schedule 40 non-metallic conduit to boxes, threaded fittings, metallic systems. Male threads on one end, socket end on the other. Will not rust or corrode. UL Listed, RoHS Compliance.
Halex 96122 2-Hole Conduit Strap Halex 90211 Compression Connector Carlon E942JR Conduit Adapter
Indoor or outdoor use. Use to secure Rigid or IMC conduit to wood, masonry or similar surfaces where greater load bearing is required. UL Listed, CSA Approved. Zinc die cast. Use to connect EMT conduit to steel outlet box, load center or other metal enclosure. UL Approved. Safe, non-conductive. For adapting Schedule 40 non-metallic conduit to boxes, threaded fittings, metallic systems. Female threads one end, socket end on the other. Will not rust or corrode.
Carlon UA7AFR-CAR Standard Radius Conduit Elbow Carlon UA9AFB-CTN Standard Radius Conduit Elbow Halex 96162 2-Hole Snap-On Conduit Strap
For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant. UL Listed E35297. For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant. Schedule 40. UL 651 Listed to the NEC by the ETL, UL Listed. To support EMT conduit where greater load bearing is required. Indoor or outdoor applications.
STRAP CBL 1HOLE SRVC ENT      Halex 96152 1-Hole Snap-On Conduit Strap Carlon UA7AFB-CTN Standard Radius Conduit Elbow
Indoors or outdoors. Steel, use to secure service entrance cable (SEU, SER) to wood, masonry or similar surface. Indoor or outdoor applications. To support EMT conduit. For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant. UL Listed E35297.
Thomas & Betts E994DR-CTN Conduit Offset Thomas And Betts Z703 1/2-25 Superstrut Halex 26155 1-Hole Snap-On Conduit Strap
Non-conductive. Will not rust or corrode. Pipe straps hold conduit and pipes in channel. They are inserted along the slot side of the channel and twisted into place. Pre-assembled with locking slot / hex head bolt. Gold-galvanized corrosion free finish. Indoor or outdoor applications. To support EMT conduit.
Halex 90221 Concrete Tight Compression Coupling Carlon E950FD-CAR Reducing Conduit Bushing Halex 26211 1-Hole Conduit Strap
Use to join two lengths of EMT conduit together. Zinc. UL, CSA Approved. For connecting different sizes of conduit. Socket both ends, for reducing male Schedule 40/80 conduit runs or fittings to female. Non-conductive. Will not rust or corrode. Steel, use to secure BX cable to wood, masonry or similar surface.
Halex 90212 Concrete Tight Rain Tight Compression Connector Carlon UA9AGR-CTN Standard Radius Conduit Elbow Halex 61225 2-Hole Conduit Strap
Zinc die cast. Use to connect EMT conduit to steel outlet box, load center or other metal enclosure. UL Approved. For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant. To support EMT conduit where greater load bearing is required. Indoor or outdoor applications.
Carlon UA7AGR-CAR Standard Radius Conduit Elbow Carlon E940K-CTN Conduit Coupling Halex 26210 1-Hole Service Entrance Strap
For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant. UL Listed E35297. Safe, non-conductive. Schedule 40 non-metallic socket type coupling for joining Schedule 40 non-metallic conduit. Will not rust or corrode. RoHS Compliance, UL Listed. Indoors or outdoors. Steel, use to secure service entrance cable (SEU, SER) to wood, masonry or similar surface.
CordMate Legrand C Wireway Outside Elbow CordMate Legrand C Wireway Inside Elbow CordMate Legrand C Wireway Flat Elbow
Hides and organizes loose cords and wires. Hides and organizes loose cords and wires. Hides and organizes loose cords and wire.
Halex 16010B Ground Clamp Halex 26165 2-Hole Snap-On Conduit Strap CordMate Legrand C19 Channel Coupling
Indoor or outdoor applications. Use to secure the grounding wire to a 1/2" through 1" pipe. UL Listed. Wire size fits #10 - #2 AWG. To support EMT conduit where greater load bearing is required. Indoor or outdoor applications. Joins channels that hide and organize loose cords and wires. UL Listed.
Superstrut 200 Series Angle Bracket Fitting Thomas And Betts Z703 3/4-25 Superstrut Halex 90222 Concrete Tight Compression Coupling
For use in metal framing applications. Manufactured from hot rolled carbon steel. Pipe straps hold conduit and pipes in channel. They are inserted along the slot side of the channel and twisted into place. Pre-assembled with locking slot / hex head bolt. Gold-galvanized corrosion free finish. Use to join two lengths of EMT conduit together. Zinc. UL, CSA Approved.
Halex 26153 1-Hole Snap-On Conduit Strap Cooper 1465Y-SP Adjustable Lamp Guard CordMate II Legrand C Wireway Flat Elbow
Indoor or outdoor applications. To support EMT conduit. High strength, impact resistant thermoplastic. Easy open guard permits relamping without removing guard. Hides and organizes loose cords and wire.
Halex 26125 2-Hole Conduit Strap Thomas & Betts E950FE-CTN Reducing Bushing CordMate II Legrand C Wireway Inside Elbow
Indoor or outdoor use. Use to secure Rigid or IMC conduit to wood, masonry or similar surfaces where greater load bearing is required. UL Listed, CSA Approved. For connecting different sizes of conduit. Socket both ends, for reducing male Schedule 40/80 conduit runs or fittings to female. Non-conductive. Will not rust or corrode. For making a 90 degree turn around an inside corner from wall-to-wall or wall-to-ceiling.
CordMate II Legrand C Wireway Outside Elbow CordMate II Legrand C59 Joint Cover Channel Coupling CordMate II Legrand C 3-Way Standard T-Fitting
For making a 90 degree turn around an outside corner. Joins channels that hide and organize loose cords and wires. UL Listed. For installation requiring 3-way branching including 90-degree angle.
Carlon E943K-CTN Terminal Adapter Thomas And Betts Z703 1 1/4-10 Superstrut Superstrut 200 Flat Straight Bracket Splice Plate 7-1/4 in L
Safe, non-conductive. For adapting schedule 40 non-metallic conduit to boxes, threaded fittings, metallic systems. Male threads on one end, socket end on the other. Will not rust or corrode. UL Listed, RoHS Compliance. Pipe straps hold conduit and pipes in channel. They are inserted along the slot side of the channel and twisted into place. Pre-assembled with locking slot / hex head bolt. Gold-galvanized corrosion free finish. Splices and supports conduit.
Carlon UA7AGB-CAR Standard Radius Conduit Elbow Gardner Bender GGS-1512R Ground Screw Thomas And Betts Z703 1-25
For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant. UL Listed E35297. Green round washer head screw for switch and outlet boxes. Pipe straps hold conduit and pipes in channel. They are inserted along the slot side of the channel and twisted into place. Pre-assembled with locking slot / hex head bolt. Gold-galvanized corrosion free finish.
Carlon E977LC-CAR Conduit Clamp Thomas And Betts Z702 21/2EG-10 Superstrut Pipe Clamp Thomas & Betts E994ER-CTN Conduit Offset
Offers same chemical resistance as Carlon nonmetallic conduit for a complete, corrosion resistant system. UV resistant for use in direct sunlight. Use in accordance with conduit spacing requirements per NEC. Each clamp requires 2 screws, 2 nuts, and 2 washers. Gray clamps for standard conduit. Pipe straps hold conduit and pipes in channel. They are inserted along the slot side of the channel and twisted into place. Pre-assembled with locking slot / hex head bolt. Non-conductive. Will not rust or corrode.
Halex 26163 2-Hole Snap-On Conduit Strap Thomas & Betts E977FC-CTN 2-Hole Conduit Clamp Halex 26126 2-Hole Conduit Strap
To support EMT conduit where greater load bearing is required. Indoor or outdoor applications. Offers same chemical resistance as Carlon nonmetallic conduit for a complete, corrosion resistant system. UV resistant for use in direct sunlight. Use in accordance with conduit spacing requirements per NEC. Each clamp requires 2 screws, 2 nuts, and 2 washers. Gray clamps for standard conduit. Indoor or outdoor use. Use to secure Rigid or IMC conduit to wood, masonry or similar surfaces where greater load bearing is required. UL Listed, CSA Approved.
Thomas And Betts Z500-25 Superstrut Beam Clamp Carlon UA9AH-CAR Standard Radius Conduit Elbow Superstrut 200 Series Angle Bracket Fitting
For hanging rod, silver electroplated finish. For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant. For use in metal framing applications. Manufactured from hot rolled carbon steel.
Thomas And Betts Z703 1 1/2-10 Superstrut Carlon UA7AHR-CTN Standard Radius Conduit Elbow Carlon E985D-CTN Rigid Conduit Body
Pipe straps hold conduit and pipes in channel. They are inserted along the slot side of the channel and twisted into place. Pre-assembled with locking slot / hex head bolt. Gold-galvanized corrosion free finish. For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant. UL Listed E35297. For easy access and pulling of wires through conduit run. Textured lid, foam-in-place gasket. For use with Schedule 40/80 non-metallic solvent weld fittings. Will not rust or corrode.
Carlon E984D-CTN Rigid Conduit Body Halex 02110 Compression Connector STRAP CBL 1HOLE OVAL SRVC ENT
For easy access and pulling of wires through conduit run. For use with Schedule 40/80 non-metallic solvent weld fittings. Will not rust or corrode. Zinc die cast. Use to connect EMT conduit to steel outlet box, load center or other metal enclosure. UL Approved. Indoors or outdoors. Steel, use to secure service entrance cable (SEU, SER) to wood, masonry or similar surface.
Halex 90401 Offset Nipple Eritech CP58 Acorn Standard Duty Ground Clamp Carlon UB9AD-CAR Standard Radius Conduit Elbow
Zinc die cast. Use as an offset connector between two enclosures. Offsets the axis of the raceway 3/4". UL Approved. Connects grounding wire to the grounding rod. UL and CSA Listed for 1/2" and 5/8" ground rods and number 4 rebar and accept a conductor range from number 10 solid to number 2 stranded. For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant.
Thomas & Betts E986D-CTN Type LB Rigid/IMC Conduit Body Gardner Bender GCC-310 2-Hole Conduit Strap Halex 26154 1-Hole Snap-On Conduit Strap
Rigid non-metallic Type LB conduit body. For easy access and pulling of wires through conduit run. For use with Schedule 40 non-metallic solvent weld fittings. Will not rust or corrode. With textured lid and foam-in-place gasket. Hubs are not threaded. UL Listed, RoHS Compliance. Heavy-duty polyethylene, resists deterioration from UV rays and breakage from extreme cold. Enables secure fastening of plastic electrical conduit, schedule 40 PVC, copper tubing. Indoor or outdoor applications. To support EMT conduit.
Carlon E940LR/CTN Conduit Coupling Thomas And Betts Z702 3EG-10 Superstrut Halex 93591 Ground Clamp
Safe, non-conductive. Schedule 40 non-metallic socket type coupling for joining Schedule 40 non-metallic conduit. Will not rust or corrode. RoHS Compliance, UL Listed. Pipe straps hold conduit and pipes in channel. They are inserted along the slot side of the channel and twisted into place. Pre-assembled with locking slot / hex head bolt. Connects grounding wire to the grounding rod.
Halex 67860 Conduit Hanger Carlon E950GE-CAR Reducing Conduit Bushing Halex 26156 1-Hole Snap-On Conduit Strap
Use to secure and suspend conduit from overhead supports. Comes with a nut and bolt. For connecting different sizes of conduit. Socket both ends, for reducing male Schedule 40/80 conduit runs or fittings to female. Non-conductive. Will not rust or corrode. Indoor or outdoor applications. To support EMT conduit.
Gardner Bender GGC-1508 Ground Clip Halex 26166 2-Hole Snap-On Conduit Strap Eritech ZWP1J Grounding Pipe Clamp
For aluminum or copper grounding wire zinc plated. To support EMT conduit where greater load bearing is required. Indoor or outdoor applications. Bolted water pipe clamps made of zinc die-cast. Wire range 8 sol. - 2 str. UL Listed. Connects grounding wire to the grounding rod.
Thomas & Betts E950GF-CTN Reducing Bushing Carlon UA9AGB-CTN Standard Radius Conduit Elbow Carlon E987D-CTN Rigid Conduit Body
For connecting different sizes of conduit. Socket both ends, for reducing male Schedule 40/80 conduit runs or fittings to female. Non-conductive. Will not rust or corrode. For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant. Schedule 40. UL 651 Listed to the NEC by the ETL, UL Listed. For easy access and pulling of wires through conduit run. For use with Schedule 40/80 non-metallic solvent weld fittings. Will not rust or corrode. UL Listed.
Thomas & Betts E977GC-CTN 2-Hole Conduit Clamp Zero-Mercury A76 Miniature Alkaline Battery Halex 02210 Concrete Tight Compression Coupling
Offers same chemical resistance as Carlon nonmetallic conduit for a complete, corrosion resistant system. UV resistant for use in direct sunlight. Use in accordance with conduit spacing requirements per NEC. Each clamp requires 2 screws, 2 nuts, and 2 washers. Gray clamps for standard conduit. Designed for electronic applications which may require high rate pulses. Replaces AG13, LR1154, EPX76, A76, LR44, SR44SW/W; Duracell LR44, Energizer A76, Panasonic L44, Panasonic LR44, Rayovac 867, Rayovac RW51, and Varta V13GA. 11.6mm diameter x 5.4mm height. 150 MAH to .9 volt. 1.5 volt, carded. Use to join two lengths of EMT conduit together. Zinc. UL, CSA Approved.
Carlon UA7AHB-CAR Standard Radius Conduit Elbow Carlon E983D-CTN Rigid IMC Conduit Body Halex 61230 2-Hole Conduit Strap
For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant. UL Listed E35297. For easy access and pulling of wires through conduit run. For use with Schedule 40/80 non-metallic solvent weld fittings. Will not rust or corrode. Indoor or outdoor use. Use to secure Rigid or IMC conduit to wood, masonry or similar surfaces where greater load bearing is required. UL Listed, CSA Approved.
Thomas & Betts E950HGR Reducing Bushing Gardner Bender GGP-1502 Grounding Pigtail Halex 26164 2-Hole Snap-On Conduit Strap
For connecting different sizes of conduit. Socket both ends, for reducing male Schedule 40/80 conduit runs or fittings to female. Non-conductive. Will not rust or corrode. AWG solid number 12 wire. 8" long with captured screw, other end bare fork terminal. To support EMT conduit where greater load bearing is required. Indoor or outdoor applications.
Gardner Bender GCC-410 2-Hole Conduit Strap Carlon UA9AHB-CTN Standard Radius Rigid Conduit Elbow Carlon E942K-CAR Conduit Adapter
Heavy-duty polyethylene, resists deterioration from UV rays and breakage from extreme cold. Enables secure fastening of plastic electrical conduit, schedule 40 PVC, copper tubing. For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant. Schedule 40. UL 651 Listed to the NEC by the ETL, UL Listed. Safe, non-conductive. For adapting Schedule 40 non-metallic conduit to boxes, threaded fittings, metallic systems. Female threads one end, socket end on the other. Will not rust or corrode.
Carlon E943L-CAR Terminal Adapter Carlon UB9AE-CAR Standard Radius Conduit Elbow Superstrut 200 Flat Right Angle Bracket Corner Plate
Safe, non-conductive. For adapting schedule 40 non-metallic conduit to boxes, threaded fittings, metallic systems. Male threads on one end, socket end on the other. Will not rust or corrode. UL Listed, RoHS Compliance. For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant. Splices and supports conduit.
Legrand NM7 Nonmetallic Raceway Inside Elbow Legrand NM8 Nonmetallic Raceway Outside Elbow Wiremold NM910 Connection Cover
For making a 90 degree inside turn around a corner from wall-to-wall or wall-to-ceiling. For making a 90 degree outside turn around a corner. Mounting components for NMI wire channel, including screws and anchors, wire clips and joint cover.
CordMate Legrand NM Raceway Wireway Inside Elbow Legrand NMW910 Raceway Accessory Pack CordMate Legrand NM Raceway Wireway Outside Elbow
For making a 90 degree inside turn around a corner from wall-to-wall or wall-to-ceiling. Mounting components for NMI wire channel, including screws and anchors, wire clips and joint cover. For making a 90 degree outside turn around a corner.
Carlon E950JHR Reducing Conduit Bushing Superstrut 200 Series Flat Straight Bracket Halex 02905B Compression Conduit Elbow
For connecting different sizes of conduit. Socket both ends, for reducing male Schedule 40/80 conduit runs or fittings to female. Non-conductive. Will not rust or corrode. Splices and supports conduit. Zinc die cast. Concrete-tight. Indoor or outdoor applications. Use to connect EMT conduit to a metal outlet box or enclosure where a 90 degree bend is required and a pipe bending tool is not used. UL, CSA Listed.
Gardner Bender 14-GRC Ground Clamp Thomas & Betts E977HC-CTN 2-Hole Conduit Clamp Fishock GRC-FS Ground Clamp
Connects grounding wire to the grounding rod. Offers same chemical resistance as Carlon nonmetallic conduit for a complete, corrosion resistant system. UV resistant for use in direct sunlight. Use in accordance with conduit spacing requirements per NEC. Each clamp requires 2 screws, 2 nuts, and 2 washers. Gray clamps for standard conduit. Helps to make a superior connection of ground wire to ground rod. Heavy duty construction for long usage.
Gardner Bender GCC-120 2-Hole Conduit Strap Gardner Bender GCC-510 2-Hole Conduit Strap Gardner Bender GCC-220 2-Hole Conduit Strap
Heavy-duty polyethylene, resists deterioration from UV rays and breakage from extreme cold. Enables secure fastening of plastic electrical conduit, schedule 40 PVC, copper tubing. Heavy-duty polyethylene, resists deterioration from UV rays and breakage from extreme cold. Enables secure fastening of plastic electrical conduit, schedule 40 PVC, copper tubing. Heavy-duty polyethylene, resists deterioration from UV rays and breakage from extreme cold. Enables secure fastening of plastic electrical conduit, schedule 40 PVC, copper tubing.
Halex 90402 Offset Nipple Halex 36010 Ground Clamp Carlon E983E-CTN Rigid IMC Conduit Body
Zinc die cast. Use as an offset connector between two enclosures. Offsets the axis of the raceway 3/4". UL Approved. Indoor or outdoor applications. Use to secure the grounding wire to a 1/2" through 1" pipe. UL Listed. Wire size fits #10 - #2 AWG. For easy access and pulling of wires through conduit run. For use with Schedule 40/80 non-metallic solvent weld fittings. Will not rust or corrode.
Carlon UB9AF-CAR Standard Radius Conduit Elbow Thomas & Betts E986E-CTN Type LB Rigid/IMC Conduit Body Carlon E985E-CTN Rigid Conduit Body
For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant. Rigid non-metallic Type LB conduit body. For easy access and pulling of wires through conduit run. For use with Schedule 40 non-metallic solvent weld fittings. Will not rust or corrode. With textured lid and foam-in-place gasket. Hubs are not threaded. UL Listed, RoHS Compliance. For easy access and pulling of wires through conduit run. Textured lid, foam-in-place gasket. For use with Schedule 40/80 non-metallic solvent weld fittings. Will not rust or corrode.
Carlon E984E-CTN Rigid Conduit Body Thomas & Betts E986F-CTN Type LB Rigid/IMC Conduit Body Thomas & Betts E977JCR-CTN 2-Hole Conduit Clamp
For easy access and pulling of wires through conduit run. For use with Schedule 40/80 non-metallic solvent weld fittings. Will not rust or corrode. Rigid non-metallic Type LB conduit body. For easy access and pulling of wires through conduit run. For use with Schedule 40 non-metallic solvent weld fittings. Will not rust or corrode. With textured lid and foam-in-place gasket. Hubs are not threaded. UL Listed, RoHS Compliance. Offers same chemical resistance as Carlon nonmetallic conduit for a complete, corrosion resistant system. UV resistant for use in direct sunlight. Use in accordance with conduit spacing requirements per NEC. Each clamp requires 2 screws, 2 nuts, and 2 washers. Gray clamps for standard conduit.
Carlon UA7AJ-CAR Standard Radius Conduit Elbow Superstrut ZCM1001/4-10 Cone Nut Halex 02112 Compression Connector
For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant. UL Listed E35297. Superstrut Cone Nut, 1/4 in Nominal, Nylon Cone, Steel Nut, Galvanized, Gold, For Superstrut Metal Framing and Hanger System Zinc die cast. Use to connect EMT conduit to steel outlet box, load center or other metal enclosure. UL Approved.
Carlon E983FR-CTN Rigid IMC Conduit Body Carlon E987E-CTN Rigid Conduit Body Carlon UA7AJB-CAR Standard Radius Conduit Elbow
For easy access and pulling of wires through conduit run. For use with Schedule 40/80 non-metallic solvent weld fittings. Will not rust or corrode. For easy access and pulling of wires through conduit run. For use with Schedule 40/80 non-metallic solvent weld fittings. Will not rust or corrode. UL Listed. For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant. UL Listed E35297.
Carlon Z703 2 Pipe Clamp Halex 90292 Concrete Tight Compression Short Radius Conduit Elbow Halex 90291 Concrete Tight Compression Short Radius Conduit Elbow
Pipe straps hold conduit and pipes in channel. They are inserted along the slot side of the channel and twisted into place. Pre-assembled with locking slot / hex head bolt. Gold-galvanized corrosion free finish. Zinc die cast. Concrete-tight. Indoor or outdoor applications. Use to connect EMT conduit to a metal outlet box or enclosure where a 90 degree bend is required and a pipe bending tool is not used. UL, CSA Listed. Zinc die cast. Concrete-tight. Indoor or outdoor applications. Use to connect EMT conduit to a metal outlet box or enclosure where a 90 degree bend is required and a pipe bending tool is not used. UL, CSA Listed.
Legrand NM11 T-Fitting CordMate Legrand NMW11 3-Way T-Fitting Carlon E942L-CAR Conduit Adapter
For branching wire channel in two directions at 90 degree angles. For branching wire channel in two directions at 90 degree angles. Safe, non-conductive. For adapting Schedule 40 non-metallic conduit to boxes, threaded fittings, metallic systems. Female threads one end, socket end on the other. Will not rust or corrode.
Eritech CWP1J Grounding Pipe Clamp Carlon E990DR-CAR Access Pull Standard Radius Conduit Elbow Cordmate Flex CM61 Split Flexible Tube
Bolted water pipe grounding clamp. UL listed. Made of corrosion-resistant copper alloy. Access pull point for cable in tight radius. Allows conduit changes in direction. Won't rust or corrode. Gasket included. Split flexible tube allows easy cord insert and removal. Peel and press connector. Bridges loose cables running from components to on-wall channels. Easy installation, no tools required.
Gardner Bender GCC-610 2-Hole Conduit Strap Carlon UA9AJ-CAR Standard Radius Conduit Elbow Carlon UA9AJB-CAR Standard Radius Conduit Elbow
Heavy-duty polyethylene, resists deterioration from UV rays and breakage from extreme cold. Enables secure fastening of plastic electrical conduit, schedule 40 PVC, copper tubing. For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant. For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant. Schedule 40. UL 651 Listed to the NEC by the ETL, UL Listed.
Energizer ECR1616BP Coin Cell Battery Legrand NM6 Nonmetallic Raceway Flat Elbow CordMate Legrand NM Raceway Wireway Flat Elbow
Replaces all 1616 batteries. 16.0mm diameter x 1.6mm height. Lithium / Manganese Dioxide (Li/MnO2). 55 mAh (to 2.0 volts). Carded. UL Listed: MH12454. For making 90 degree right or left turns on a flat surface. For making 90 degree right or left turns on a flat surface.
Halex 02212 Concrete Tight Compression Coupling Carlon E987F-CAR Rigid Conduit Body Legrand B-8 Metal Raceway Outside Elbow
Use to join two lengths of EMT conduit together. Zinc. UL, CSA Approved. For easy access and pulling of wires through conduit run. For use with Schedule 40/80 non-metallic solvent weld fittings. Will not rust or corrode. UL Listed. Used to make a 90 degree outside turn around a corner.
Thomas And Betts ZA1001/4EG-10 Superstrut Thomas And Betts Z502-10 Superstrut Beam Clamp Carlon E990ER-CAR Access Pull Standard Radius Conduit Elbow
For use with 'A' and 'C' series channel and inserts. For hanging rod, silver electroplated finish. Access pull point for cable in tight radius. Allows conduit changes in direction. Won't rust or corrode. Gasket included.
Halex 93592 Ground Clamp Halex 26141 Flat Drive Strap Halex 26151 1-Hole Snap-On Conduit Strap
Connects grounding wire to the grounding rod. Indoors or outdoors. To secure EMT conduit to a wood or masonry surface. Indoor or outdoor applications. To support EMT conduit.
Carlon UB9AG-CAR Standard Radius Conduit Elbow Thomas And Betts ZA1003/8EG-10 Superstrut Halex 61130 1-Hole Conduit Strap
For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant. For use with 'A' and 'C' series channel and inserts. Steel, indoor or outdoor. Use to secure Rigid or IMC conduit to wood, masonry or similar surfaces where greater load bearing is required. Tray boxed.
Legrand B-6 Metal Raceway Flat Elbow Legrand B-7 Metal Raceway Inside Elbow Thomas & Betts E986GR Type LB Rigid/IMC Conduit Body
Used to make a 90 degree right or left turn on a flat surface. Used to make a 90 degree inside turn around a corner, from wall-to-wall or wall-to-ceiling. Rigid non-metallic Type LB conduit body. For easy access and pulling of wires through conduit run. For use with Schedule 40 non-metallic solvent weld fittings. Will not rust or corrode. With textured lid and foam-in-place gasket. Hubs are not threaded. UL Listed, RoHS Compliance.
Thomas And Betts ZU501-10 Superstrut Beam Clamp Halex 26152 1-Hole Snap-On Conduit Strap Halex 26161 2-Hole Snap-On Conduit Strap
For channel. 3-1/16". Indoor or outdoor applications. To support EMT conduit. To support EMT conduit where greater load bearing is required. Indoor or outdoor applications.
Thomas And Betts ZA1001/2EG-10 Superstrut Carlon E990DER-CAR Pull Elbow With Reducer Bushing Halex 02115 Compression Connector
For use with 'A' and 'C' series channel and inserts. Access pull point for cable in tight radius. Allows conduit changes in direction. Won't rust or corrode. Gasket included. Zinc die cast. Use to connect EMT conduit to steel outlet box, load center or other metal enclosure. UL Approved.
Halex 20210 Concrete Tight Compression Connector Halex 26250 Concrete Tight Rain Tight Compression Connector Steel City ZCK535-10 Armored Cable Hanger Clip
Zinc die cast. Use to connect EMT conduit to steel outlet box, load center or other metal enclosure. UL Approved. Concrete-tight and rain-tight. Use to connect EMT conduit to steel outlet box, load center, or other metal enclosure in a wet location. Flexible conduit hanger from drop wire, #8-#12 wire, .433-.535 O.D. cable.
Halex 26162 2-Hole Snap-On Conduit Strap CordMate Legrand C10 Wire Channel Steel City R Threaded Rod
To support EMT conduit where greater load bearing is required. Indoor or outdoor applications. Hides and organizes low voltage loose cords and wires. UL Listed. 1/2" height x 3/8" width x 5' length. Framing and hanging applications. Free-running, corrosion resistant, burr-free.
Superstrut 200 Series Square Conduit Washer Halex 36019 Ground Clamp Carlon UAFAD Flexible Conduit Elbow
GoldGalv finish. Indoor or outdoor applications. Use to secure the grounding wire to a 1/2" through 1" pipe. UL Listed. Wire size fits #10 - #2 AWG. Made of a highly durable plastic (PVC) compound making the product nonmetallic and safe to install. Elbow is non-corrosive, rustproof, and easily pliable. Good for those applications that requires change of direction. UL listed.
Superstrut 200 Series Square Conduit Washer Energizer ECR1632BP Coin Cell Battery Carlon E983GR-CAR Rigid IMC Conduit Body
GoldGalv finish. For electronics around the house, like keyless entry, electronic books and glucose monitors. Performs in extreme temperatures from -22 to 140 degrees F. Holds power for 8 years when not in use. Replacement for: BR1632, DL1632, ECR1632, KCR1632, KECR1632, KL1632, L1632. UL Listed. For easy access and pulling of wires through conduit run. For use with Schedule 40/80 non-metallic solvent weld fittings. Will not rust or corrode.
Thomas & Betts E986HR Type LB Rigid/IMC Conduit Body Halex 26142 Flat Drive Strap Energizer 2032BP-2 Coin Cell Battery
Rigid non-metallic Type LB conduit body. For easy access and pulling of wires through conduit run. For use with Schedule 40 non-metallic solvent weld fittings. Will not rust or corrode. With textured lid and foam-in-place gasket. Hubs are not threaded. UL Listed, RoHS Compliance. Indoors or outdoors. To secure EMT conduit to a wood or masonry surface. Replaces Duracell DL2032, Energizer ECR2032, Panasonic CR2032, and Rayovac CR2032. 20.0mm diameter x 3.2mm height. Lithium / Manganese Dioxide (Li/MnO2). 240 mAh (to 2.0 volts). Carded. UL Listed: MH12454.
Energizer 2016BP-2 Button Cell Battery Eritech CWP1JU Grounding Pipe Clamp Legrand NMW17 Raceway Conduit Connector