Home > PLUMBING > KITCHEN & BATH > FIXTURES > LAUNDRY/UTILITY TUBS
Sort By:
1
Carlon E940D-CTN Standard Conduit Coupling Carlon E943D-CTN Terminal Adapter Carlon E940E-CTN/CAR Standard Conduit Coupling
Safe, non-conductive. Schedule 40 non-metallic socket type coupling for joining Schedule 40 non-metallic conduit. Will not rust or corrode. RoHS Compliance, UL Listed. Safe, non-conductive. For adapting schedule 40 non-metallic conduit to boxes, threaded fittings, metallic systems. Male threads on one end, socket end on the other. Will not rust or corrode. UL Listed, RoHS Compliance. Safe, non-conductive. Schedule 40 non-metallic socket type coupling for joining Schedule 40 non-metallic conduit. Will not rust or corrode. RoHS Compliance, UL Listed.
Carlon E942DR-CTN Conduit Adapter Halex 71205B 2-Hole Conduit Strap Carlon E942ER-CTN Conduit Adapter
Safe, non-conductive. For adapting Schedule 40 non-metallic conduit to boxes, threaded fittings, metallic systems. Female threads one end, socket end on the other. Will not rust or corrode. Indoor or outdoor applications. Use to secure PVC conduit to wood, masonry or similar surface. Bulk packed. Safe, non-conductive. For adapting Schedule 40 non-metallic conduit to boxes, threaded fittings, metallic systems. Female threads one end, socket end on the other. Will not rust or corrode.
Carlon E940FR-CTN Standard Conduit Coupling Carlon E943E-CTN Terminal Adapter Halex 61612B 2-Hole Snap-On Conduit Strap
Safe, non-conductive. Schedule 40 non-metallic socket type coupling for joining Schedule 40 non-metallic conduit. Will not rust or corrode. RoHS Compliance, UL Listed. Safe, non-conductive. For adapting schedule 40 non-metallic conduit to boxes, threaded fittings, metallic systems. Male threads on one end, socket end on the other. Will not rust or corrode. UL Listed, RoHS Compliance. To support EMT conduit where greater load bearing is required. Indoor or outdoor applications.
Carlon E943FR-CTN Terminal Adapter Halex 71210B 2-Hole Conduit Strap Halex 71212B 2-Hole Conduit Strap
Safe, non-conductive. For adapting schedule 40 non-metallic conduit to boxes, threaded fittings, metallic systems. Male threads on one end, socket end on the other. Will not rust or corrode. UL Listed, RoHS Compliance. Indoor or outdoor applications. Use to secure PVC conduit to wood, masonry or similar surface. Bulk packed. Indoor or outdoor applications. Use to secure PVC conduit to wood, masonry or similar surface. Bulk packed.
Halex 96163 2-Hole Snap-On Conduit Strap Carlon E996DR-CTN Conduit Box Adapter Carlon Snap Strap E978DC-CAR 1-Hole Single Conduit Strap
To support EMT conduit where greater load bearing is required. Indoor or outdoor applications. For PVC enclosures. cULus Listed. Safe, non-conductive. To be used in accordance with NEC, Article 347.8 conduit spacing requirements. For use with Schedule 40/80 non-metallic solvent weld fittings.
Carlon E940GR-CTN Standard Conduit Coupling Halex 71215B 2-Hole Conduit Strap Carlon E942FR-CTN Conduit Adapter
Safe, non-conductive. Schedule 40 non-metallic socket type coupling for joining Schedule 40 non-metallic conduit. Will not rust or corrode. RoHS Compliance, UL Listed. Indoor or outdoor applications. Use to secure PVC conduit to wood, masonry or similar surface. Bulk packed. Safe, non-conductive. For adapting Schedule 40 non-metallic conduit to boxes, threaded fittings, metallic systems. Female threads one end, socket end on the other. Will not rust or corrode.
Carlon UA9ADB-CTN Standard Radius Rigid Conduit Elbow Carlon E996ER-CTN Conduit Box Adapter Carlon Snap Strap E978EC-CAR 1-Hole Single Conduit Strap
For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant. Schedule 40. UL 651 Listed to the NEC by the ETL, UL Listed. For PVC enclosures. cULus Listed. Safe, non-conductive. To be used in accordance with NEC, Article 347.8 conduit spacing requirements. For use with Schedule 40/80 non-metallic solvent weld fittings.
Halex 90440 Screw-In Connector Carlon UA9ADR-CTN Standard Radius Conduit Elbow Carlon E940HR-CTN Standard Conduit Coupling
Zinc die cast. Use to connect flexible metallic conduit (Greenfield) to steel outlet box, load center or other metal enclosure. Fits 1/2" knock outs. For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant. Safe, non-conductive. Schedule 40 non-metallic socket type coupling for joining Schedule 40 non-metallic conduit. Will not rust or corrode. RoHS Compliance, UL Listed.
Carlon E943GR-CTN Terminal Adapter Carlon UA7ADB-CTN Standard Radius Conduit Elbow Carlon UA9AER-CTN Standard Radius Conduit Elbow
Safe, non-conductive. For adapting schedule 40 non-metallic conduit to boxes, threaded fittings, metallic systems. Male threads on one end, socket end on the other. Will not rust or corrode. UL Listed, RoHS Compliance. For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant. UL Listed E35297. For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant.
Halex 96111 1-Hole Conduit Strap Halex 61220B 2-Hole Conduit Strap Halex 90441 Screw-In Connector
Indoor or outdoor applications. Use to secure Rigid or I.M.C. conduit to wood, masonry or similar surfaces. Indoor or outdoor use. Use to secure Rigid or IMC conduit to wood, masonry or similar surfaces where greater load bearing is required. UL Listed, CSA Approved. Zinc die cast. Use to connect flexible metallic conduit (Greenfield) to steel outlet box, load center or other metal enclosure. Fits 1/2" knock outs.
Carlon UA7ADR-CAR Standard Radius Conduit Elbow Carlon E943HR-CTN Terminal Adapter Halex 90451 Screw-In Coupling
For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant. UL Listed E35297. Safe, non-conductive. For adapting schedule 40 non-metallic conduit to boxes, threaded fittings, metallic systems. Male threads on one end, socket end on the other. Will not rust or corrode. UL Listed, RoHS Compliance. Zinc die cast. Use to join two pieces of flexible metallic conduit (Greenfield) together.
Carlon UA9AEB-CTN Standard Radius Rigid Conduit Elbow Carlon E942GR-CTN Conduit Adapter Thomas & Betts E950ED-CTN Reducing Bushing
For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant. Schedule 40. UL 651 Listed to the NEC by the ETL, UL Listed. Safe, non-conductive. For adapting Schedule 40 non-metallic conduit to boxes, threaded fittings, metallic systems. Female threads one end, socket end on the other. Will not rust or corrode. For connecting different sizes of conduit. Socket both ends, for reducing male Schedule 40/80 conduit runs or fittings to female. Non-conductive. Will not rust or corrode.
Halex 71220B 2-Hole Conduit Strap Carlon Snap Strap E978FC-CAR 1-Hole Single Conduit Strap Carlon UA7AER-CAR Standard Radius Conduit Elbow
Indoor or outdoor applications. Use to secure PVC conduit to wood, masonry or similar surface. Bulk packed. Safe, non-conductive. To be used in accordance with NEC, Article 347.8 conduit spacing requirements. For use with Schedule 40/80 non-metallic solvent weld fittings. For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant. UL Listed E35297.
Halex 96121 2-Hole Conduit Strap Carlon E940JR-CTN Standard Conduit Coupling Carlon E942HR Conduit Adapter
Indoor or outdoor use. Use to secure Rigid or IMC conduit to wood, masonry or similar surfaces where greater load bearing is required. UL Listed, CSA Approved. Safe, non-conductive. Schedule 40 non-metallic socket type coupling for joining Schedule 40 non-metallic conduit. Will not rust or corrode. RoHS Compliance, UL Listed. Safe, non-conductive. For adapting Schedule 40 non-metallic conduit to boxes, threaded fittings, metallic systems. Female threads one end, socket end on the other. Will not rust or corrode.
Thomas & Betts E977DC-CTN 2-Hole Conduit Clamp Halex 90580 Cable Connector Halex 96151 1-Hole Snap-On Conduit Strap
Offers same chemical resistance as Carlon nonmetallic conduit for a complete, corrosion resistant system. UV resistant for use in direct sunlight. Use in accordance with conduit spacing requirements per NEC. Each clamp requires 2 screws, 2 nuts, and 2 washers. Gray clamps for standard conduit. Zinc die cast. In a dry location, use to connect BX cable to a steel outlet box or other metal enclosure. 3/8" size fits 1/2" knock outs. UL Approved. Indoor or outdoor applications. To support EMT conduit.
Carlon UA7AEB-CTN Standard Radius Conduit Elbow Halex 96780 Conduit Hanger Halex 96161 2-Hole Snap-On Conduit Strap
For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant. UL Listed E35297. Use to secure and suspend conduit from overhead supports. Comes with a nut and bolt. To support EMT conduit where greater load bearing is required. Indoor or outdoor applications.
Halex 96112 1-Hole Conduit Strap Halex 90481 Concrete Tight Set Screw Connector Halex 96213 1-Hole Cable Strap
Indoor or outdoor applications. Use to secure Rigid or I.M.C. conduit to wood, masonry or similar surfaces. Zinc die cast. In a dry location, use to connect flexible metallic conduit (Greenfield or BX) to a steel outlet box or other metal enclosure. UL Approved. Steel, use to secure BX cable to wood, masonry or similar surface.
Halex 96781 Conduit Hanger Carlon UA9AFR-CTN Standard Radius Conduit Elbow Thomas & Betts E977EC-CTN 2-Hole Conduit Clamp
Use to secure and suspend conduit from overhead supports. Comes with a nut and bolt. For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant. Offers same chemical resistance as Carlon nonmetallic conduit for a complete, corrosion resistant system. UV resistant for use in direct sunlight. Use in accordance with conduit spacing requirements per NEC. Each clamp requires 2 screws, 2 nuts, and 2 washers. Gray clamps for standard conduit.
Carlon E943JRR Terminal Adapter Halex 96122 2-Hole Conduit Strap Halex 90570 Combination Clamp Connector
Safe, non-conductive. For adapting schedule 40 non-metallic conduit to boxes, threaded fittings, metallic systems. Male threads on one end, socket end on the other. Will not rust or corrode. UL Listed, RoHS Compliance. Indoor or outdoor use. Use to secure Rigid or IMC conduit to wood, masonry or similar surfaces where greater load bearing is required. UL Listed, CSA Approved. Zinc die cast. In a dry location, use to connect flexible metallic conduit (Greenfield, BX, NM or Metal Clad) to a steel outlet box or other metal enclosure. 3/8" size fits 1/2" knock outs. UL Approved.
Carlon E942JR Conduit Adapter Carlon UA7AFR-CAR Standard Radius Conduit Elbow Carlon UA9AFB-CTN Standard Radius Conduit Elbow
Safe, non-conductive. For adapting Schedule 40 non-metallic conduit to boxes, threaded fittings, metallic systems. Female threads one end, socket end on the other. Will not rust or corrode. For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant. UL Listed E35297. For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant. Schedule 40. UL 651 Listed to the NEC by the ETL, UL Listed.
Halex 96162 2-Hole Snap-On Conduit Strap Halex 90442 Screw-In Connector Halex 91100 Conduit Elbow
To support EMT conduit where greater load bearing is required. Indoor or outdoor applications. Zinc die cast. Use to connect flexible metallic conduit (Greenfield) to steel outlet box, load center or other metal enclosure. Fits 1/2" knock outs. Zinc die cast. In a dry location, use to connect flexible metallic conduit (Greenfield or BX) to a steel outlet box or other metal enclosure.
Halex 90420 Squeeze Connector Halex 65705B Snap-In Cable Connector STRAP CBL 1HOLE SRVC ENT
Zinc die cast. In a dry location, use to connect flexible metallic conduit (Greenfield or BX) to steel outlet box, load center or other metal enclosure. Fits 1/2" knock outs. UL Approved. In a dry location, use to connect aluminum or steel AC, aluminum MC, and steel flexible metal conduit. Suitable for: aluminum and steel armored cable with 14/2 - 10/2 wire, steel flexible metal conduit, .45 diameter aluminum interlocked MC cable. Features snap-in installation, no locknut, insulating bushing included. Indoors or outdoors. Steel, use to secure service entrance cable (SEU, SER) to wood, masonry or similar surface.
Halex 96152 1-Hole Snap-On Conduit Strap Carlon UA7AFB-CTN Standard Radius Conduit Elbow Thomas & Betts E994DR-CTN Conduit Offset
Indoor or outdoor applications. To support EMT conduit. For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant. UL Listed E35297. Non-conductive. Will not rust or corrode.
Halex 26155 1-Hole Snap-On Conduit Strap Halex 90421 Squeeze Connector Carlon E950FD-CAR Reducing Conduit Bushing
Indoor or outdoor applications. To support EMT conduit. Zinc die cast. In a dry location, use to connect flexible metallic conduit (Greenfield or BX) to steel outlet box, load center or other metal enclosure. Fits 1/2" knock outs. UL Approved. For connecting different sizes of conduit. Socket both ends, for reducing male Schedule 40/80 conduit runs or fittings to female. Non-conductive. Will not rust or corrode.
Halex 26211 1-Hole Conduit Strap Halex 75403 Anti-Short Conduit Bushing Carlon UA9AGR-CTN Standard Radius Conduit Elbow
Steel, use to secure BX cable to wood, masonry or similar surface. High dielectric plastic. Use to protect wire within flexible metallic conduit (Greenfield, BX). Insert one bushing at each end of conduit. UL Approved. No. 75400 - Fits cable range: 14/2, 14/3, 12/2 No. 75401 - Fits cable range: 14/4, 12/3, 6/1, 4/1. No. 75402 - Fits cable range: 12/4, 10/2, 10/3, 2/1. No. 75403 - Fits cable range: 10/4, 8/2, 8/3, 1/1. No. 75404 - Fits cable range: 8/4, 6/2, 6/3, 4/2, 4/3, 6/4. For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant.
Halex 61225 2-Hole Conduit Strap Carlon UA7AGR-CAR Standard Radius Conduit Elbow Carlon E940K-CTN Conduit Coupling
To support EMT conduit where greater load bearing is required. Indoor or outdoor applications. For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant. UL Listed E35297. Safe, non-conductive. Schedule 40 non-metallic socket type coupling for joining Schedule 40 non-metallic conduit. Will not rust or corrode. RoHS Compliance, UL Listed.
Halex 26210 1-Hole Service Entrance Strap CONNECTOR DPLX FLX N-MTL 3/8IN Halex 16010B Ground Clamp
Indoors or outdoors. Steel, use to secure service entrance cable (SEU, SER) to wood, masonry or similar surface. In a dry location, use to connect two pieces of flexible armored cable (Greenfield or BX) to a steel outlet box or other metal enclosure, when using only one knock-out opening. UL Approved. Indoor or outdoor applications. Use to secure the grounding wire to a 1/2" through 1" pipe. UL Listed. Wire size fits #10 - #2 AWG.
Halex 26165 2-Hole Snap-On Conduit Strap Halex 91531 Combination Coupling Halex 90422 Squeeze Connector
To support EMT conduit where greater load bearing is required. Indoor or outdoor applications. Zinc die cast. Use to join EMT conduit to flexible metal conduit. Indoor use only. With UPC. UL Approved. Zinc die cast. In a dry location, use to connect flexible metallic conduit (Greenfield or BX) to steel outlet box, load center or other metal enclosure. Fits 1/2" knock outs. UL Approved.
Halex 26153 1-Hole Snap-On Conduit Strap Halex 91101 Conduit Elbow Halex 26125 2-Hole Conduit Strap
Indoor or outdoor applications. To support EMT conduit. Zinc die cast. In a dry location, use to connect flexible metallic conduit (Greenfield or BX) to a steel outlet box or other metal enclosure. Indoor or outdoor use. Use to secure Rigid or IMC conduit to wood, masonry or similar surfaces where greater load bearing is required. UL Listed, CSA Approved.
Thomas & Betts E950FE-CTN Reducing Bushing Carlon E943K-CTN Terminal Adapter Carlon UA7AGB-CAR Standard Radius Conduit Elbow
For connecting different sizes of conduit. Socket both ends, for reducing male Schedule 40/80 conduit runs or fittings to female. Non-conductive. Will not rust or corrode. Safe, non-conductive. For adapting schedule 40 non-metallic conduit to boxes, threaded fittings, metallic systems. Male threads on one end, socket end on the other. Will not rust or corrode. UL Listed, RoHS Compliance. For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant. UL Listed E35297.
Gardner Bender GGS-1512R Ground Screw Carlon LN43DA-CTN Liquidtight Straight Angle Conduit Connector Carlon E977LC-CAR Conduit Clamp
Green round washer head screw for switch and outlet boxes. For flexible conduit. Non-metallic/non-conductive, corrosion resistant plastic. Offers same chemical resistance as Carlon nonmetallic conduit for a complete, corrosion resistant system. UV resistant for use in direct sunlight. Use in accordance with conduit spacing requirements per NEC. Each clamp requires 2 screws, 2 nuts, and 2 washers. Gray clamps for standard conduit.
Thomas & Betts E994ER-CTN Conduit Offset Halex 26163 2-Hole Snap-On Conduit Strap Thomas & Betts E977FC-CTN 2-Hole Conduit Clamp
Non-conductive. Will not rust or corrode. To support EMT conduit where greater load bearing is required. Indoor or outdoor applications. Offers same chemical resistance as Carlon nonmetallic conduit for a complete, corrosion resistant system. UV resistant for use in direct sunlight. Use in accordance with conduit spacing requirements per NEC. Each clamp requires 2 screws, 2 nuts, and 2 washers. Gray clamps for standard conduit.
Halex 26126 2-Hole Conduit Strap Halex 75400 Anti-Short Conduit Bushing Carlon UA9AH-CAR Standard Radius Conduit Elbow
Indoor or outdoor use. Use to secure Rigid or IMC conduit to wood, masonry or similar surfaces where greater load bearing is required. UL Listed, CSA Approved. High dielectric plastic. Use to protect wire within flexible metallic conduit (Greenfield, BX). Insert one bushing at each end of conduit. UL Approved. No. 75400 - Fits cable range: 14/2, 14/3, 12/2 No. 75401 - Fits cable range: 14/4, 12/3, 6/1, 4/1. No. 75402 - Fits cable range: 12/4, 10/2, 10/3, 2/1. No. 75403 - Fits cable range: 10/4, 8/2, 8/3, 1/1. No. 75404 - Fits cable range: 8/4, 6/2, 6/3, 4/2, 4/3, 6/4. For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant.
Carlon UA7AHR-CTN Standard Radius Conduit Elbow Carlon E985D-CTN Rigid Conduit Body Carlon E984D-CTN Rigid Conduit Body
For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant. UL Listed E35297. For easy access and pulling of wires through conduit run. Textured lid, foam-in-place gasket. For use with Schedule 40/80 non-metallic solvent weld fittings. Will not rust or corrode. For easy access and pulling of wires through conduit run. For use with Schedule 40/80 non-metallic solvent weld fittings. Will not rust or corrode.
STRAP CBL 1HOLE OVAL SRVC ENT Eritech CP58 Acorn Standard Duty Ground Clamp Carlon UB9AD-CAR Standard Radius Conduit Elbow
Indoors or outdoors. Steel, use to secure service entrance cable (SEU, SER) to wood, masonry or similar surface. Connects grounding wire to the grounding rod. UL and CSA Listed for 1/2" and 5/8" ground rods and number 4 rebar and accept a conductor range from number 10 solid to number 2 stranded. For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant.
Thomas & Betts E986D-CTN Type LB Rigid/IMC Conduit Body Gardner Bender GCC-310 2-Hole Conduit Strap Halex 26154 1-Hole Snap-On Conduit Strap
Rigid non-metallic Type LB conduit body. For easy access and pulling of wires through conduit run. For use with Schedule 40 non-metallic solvent weld fittings. Will not rust or corrode. With textured lid and foam-in-place gasket. Hubs are not threaded. UL Listed, RoHS Compliance. Heavy-duty polyethylene, resists deterioration from UV rays and breakage from extreme cold. Enables secure fastening of plastic electrical conduit, schedule 40 PVC, copper tubing. Indoor or outdoor applications. To support EMT conduit.
Halex 90452 Screw-In Coupling Carlon E940LR/CTN Conduit Coupling Halex 11005B Conduit Elbow
Zinc die cast. Use to join two pieces of flexible metallic conduit (Greenfield) together. Safe, non-conductive. Schedule 40 non-metallic socket type coupling for joining Schedule 40 non-metallic conduit. Will not rust or corrode. RoHS Compliance, UL Listed. Zinc die cast. In a dry location, use to connect flexible metallic conduit (Greenfield or BX) to a steel outlet box or other metal enclosure.
Halex 93591 Ground Clamp Halex 67860 Conduit Hanger Carlon E950GE-CAR Reducing Conduit Bushing
Connects grounding wire to the grounding rod. Use to secure and suspend conduit from overhead supports. Comes with a nut and bolt. For connecting different sizes of conduit. Socket both ends, for reducing male Schedule 40/80 conduit runs or fittings to female. Non-conductive. Will not rust or corrode.
Halex 26156 1-Hole Snap-On Conduit Strap Gardner Bender GGC-1508 Ground Clip Halex 26166 2-Hole Snap-On Conduit Strap
Indoor or outdoor applications. To support EMT conduit. For aluminum or copper grounding wire zinc plated. To support EMT conduit where greater load bearing is required. Indoor or outdoor applications.
Eritech ZWP1J Grounding Pipe Clamp Carlon LN43EA-CTN Liquidtight Straight Angle Conduit Connector Thomas & Betts E950GF-CTN Reducing Bushing
Bolted water pipe clamps made of zinc die-cast. Wire range 8 sol. - 2 str. UL Listed. Connects grounding wire to the grounding rod. For flexible conduit. Non-metallic/non-conductive, corrosion resistant plastic. For connecting different sizes of conduit. Socket both ends, for reducing male Schedule 40/80 conduit runs or fittings to female. Non-conductive. Will not rust or corrode.
Carlon UA9AGB-CTN Standard Radius Conduit Elbow Carlon E987D-CTN Rigid Conduit Body Thomas & Betts E977GC-CTN 2-Hole Conduit Clamp
For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant. Schedule 40. UL 651 Listed to the NEC by the ETL, UL Listed. For easy access and pulling of wires through conduit run. For use with Schedule 40/80 non-metallic solvent weld fittings. Will not rust or corrode. UL Listed. Offers same chemical resistance as Carlon nonmetallic conduit for a complete, corrosion resistant system. UV resistant for use in direct sunlight. Use in accordance with conduit spacing requirements per NEC. Each clamp requires 2 screws, 2 nuts, and 2 washers. Gray clamps for standard conduit.
Halex 20581 Cable Connector Carlon UA7AHB-CAR Standard Radius Conduit Elbow Carlon E983D-CTN Rigid IMC Conduit Body
In a dry location, use to connect AC (BX) cable to a steel outlet box or other metal enclosure. Suitable for #14-2 steel armored cable. For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant. UL Listed E35297. For easy access and pulling of wires through conduit run. For use with Schedule 40/80 non-metallic solvent weld fittings. Will not rust or corrode.
Halex 61230 2-Hole Conduit Strap Thomas & Betts E950HGR Reducing Bushing Gardner Bender GGP-1502 Grounding Pigtail
Indoor or outdoor use. Use to secure Rigid or IMC conduit to wood, masonry or similar surfaces where greater load bearing is required. UL Listed, CSA Approved. For connecting different sizes of conduit. Socket both ends, for reducing male Schedule 40/80 conduit runs or fittings to female. Non-conductive. Will not rust or corrode. AWG solid number 12 wire. 8" long with captured screw, other end bare fork terminal.
Halex 75401 Anti-Short Conduit Bushing Halex 26164 2-Hole Snap-On Conduit Strap Carlon Carflex LN20DA-CTN Liquidtight Conduit Elbow
High dielectric plastic. Use to protect wire within flexible metallic conduit (Greenfield, BX). Insert one bushing at each end of conduit. UL Approved. No. 75400 - Fits cable range: 14/2, 14/3, 12/2 No. 75401 - Fits cable range: 14/4, 12/3, 6/1, 4/1. No. 75402 - Fits cable range: 12/4, 10/2, 10/3, 2/1. No. 75403 - Fits cable range: 10/4, 8/2, 8/3, 1/1. No. 75404 - Fits cable range: 8/4, 6/2, 6/3, 4/2, 4/3, 6/4. To support EMT conduit where greater load bearing is required. Indoor or outdoor applications. For flexible conduit. Non-metallic, Non-conductive, corrosion resistant plastic.
Gardner Bender GCC-410 2-Hole Conduit Strap Halex 91102 Pull Conduit Elbow Carlon UA9AHB-CTN Standard Radius Rigid Conduit Elbow
Heavy-duty polyethylene, resists deterioration from UV rays and breakage from extreme cold. Enables secure fastening of plastic electrical conduit, schedule 40 PVC, copper tubing. Zinc die cast. In a dry location, use to connect flexible metallic conduit (Greenfield or BX) to a steel outlet box or other metal enclosure. For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant. Schedule 40. UL 651 Listed to the NEC by the ETL, UL Listed.
Halex Straight Liquid Tight Connector Carlon E942K-CAR Conduit Adapter Carlon E943L-CAR Terminal Adapter
Fitting will not rust or corrode. No disassembly required. Reusable, hand tightened nut. Use to connect type B non-metallic liquid-tight conduit to a weatherproof outlet box, pool/spa equipment motor, central air conditioning unit or various other electrical enclosures or hubs. UL Approved. Safe, non-conductive. For adapting Schedule 40 non-metallic conduit to boxes, threaded fittings, metallic systems. Female threads one end, socket end on the other. Will not rust or corrode. Safe, non-conductive. For adapting schedule 40 non-metallic conduit to boxes, threaded fittings, metallic systems. Male threads on one end, socket end on the other. Will not rust or corrode. UL Listed, RoHS Compliance.
Carlon UB9AE-CAR Standard Radius Conduit Elbow Carlon E950JHR Reducing Conduit Bushing Halex 91625 Multi-Piece Liquid Tight Compression Connector
For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant. For connecting different sizes of conduit. Socket both ends, for reducing male Schedule 40/80 conduit runs or fittings to female. Non-conductive. Will not rust or corrode. Zinc die cast. Use to connect liquid-tight conduit to a steel outlet box, metal enclosure or hub. UL Approved.
Gardner Bender 14-GRC Ground Clamp Thomas & Betts E977HC-CTN 2-Hole Conduit Clamp Halex 75402 Anti-Short Conduit Bushing
Connects grounding wire to the grounding rod. Offers same chemical resistance as Carlon nonmetallic conduit for a complete, corrosion resistant system. UV resistant for use in direct sunlight. Use in accordance with conduit spacing requirements per NEC. Each clamp requires 2 screws, 2 nuts, and 2 washers. Gray clamps for standard conduit. High dielectric plastic. Use to protect wire within flexible metallic conduit (Greenfield, BX). Insert one bushing at each end of conduit. UL Approved. No. 75400 - Fits cable range: 14/2, 14/3, 12/2 No. 75401 - Fits cable range: 14/4, 12/3, 6/1, 4/1. No. 75402 - Fits cable range: 12/4, 10/2, 10/3, 2/1. No. 75403 - Fits cable range: 10/4, 8/2, 8/3, 1/1. No. 75404 - Fits cable range: 8/4, 6/2, 6/3, 4/2, 4/3, 6/4.
Fishock GRC-FS Ground Clamp Gardner Bender GCC-120 2-Hole Conduit Strap Halex 16205B Multi-Piece Liquid Tight Conduit Connector
Helps to make a superior connection of ground wire to ground rod. Heavy duty construction for long usage. Heavy-duty polyethylene, resists deterioration from UV rays and breakage from extreme cold. Enables secure fastening of plastic electrical conduit, schedule 40 PVC, copper tubing. Multi-piece. Zinc die cast. Use to connect liquid-tight conduit to a steel outlet box or other metal enclosure or hub. UL Listed. Bulk packed.
Gardner Bender GCC-510 2-Hole Conduit Strap Gardner Bender GCC-220 2-Hole Conduit Strap Halex 27621 Multi-Piece Liquid Tight Straight Conduit Connector
Heavy-duty polyethylene, resists deterioration from UV rays and breakage from extreme cold. Enables secure fastening of plastic electrical conduit, schedule 40 PVC, copper tubing. Heavy-duty polyethylene, resists deterioration from UV rays and breakage from extreme cold. Enables secure fastening of plastic electrical conduit, schedule 40 PVC, copper tubing. Fitting will not rust or corrode. No disassembly required. Reusable, hand tightened nut. Use to connect type B non-metallic liquid-tight conduit to a weatherproof outlet box, pool/spa equipment motor, central air conditioning unit or various other electrical enclosures or hubs. UL Approved.
Halex 36010 Ground Clamp Carlon Carflex LN20EA-CTN Liquidtight Conduit Elbow Carlon E983E-CTN Rigid IMC Conduit Body
Indoor or outdoor applications. Use to secure the grounding wire to a 1/2" through 1" pipe. UL Listed. Wire size fits #10 - #2 AWG. For flexible conduit. Non-metallic, Non-conductive, corrosion resistant plastic. For easy access and pulling of wires through conduit run. For use with Schedule 40/80 non-metallic solvent weld fittings. Will not rust or corrode.
Carlon UB9AF-CAR Standard Radius Conduit Elbow Thomas & Betts E986E-CTN Type LB Rigid/IMC Conduit Body Carlon E985E-CTN Rigid Conduit Body
For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant. Rigid non-metallic Type LB conduit body. For easy access and pulling of wires through conduit run. For use with Schedule 40 non-metallic solvent weld fittings. Will not rust or corrode. With textured lid and foam-in-place gasket. Hubs are not threaded. UL Listed, RoHS Compliance. For easy access and pulling of wires through conduit run. Textured lid, foam-in-place gasket. For use with Schedule 40/80 non-metallic solvent weld fittings. Will not rust or corrode.
Carlon E984E-CTN Rigid Conduit Body Thomas & Betts E986F-CTN Type LB Rigid/IMC Conduit Body Thomas & Betts E977JCR-CTN 2-Hole Conduit Clamp
For easy access and pulling of wires through conduit run. For use with Schedule 40/80 non-metallic solvent weld fittings. Will not rust or corrode. Rigid non-metallic Type LB conduit body. For easy access and pulling of wires through conduit run. For use with Schedule 40 non-metallic solvent weld fittings. Will not rust or corrode. With textured lid and foam-in-place gasket. Hubs are not threaded. UL Listed, RoHS Compliance. Offers same chemical resistance as Carlon nonmetallic conduit for a complete, corrosion resistant system. UV resistant for use in direct sunlight. Use in accordance with conduit spacing requirements per NEC. Each clamp requires 2 screws, 2 nuts, and 2 washers. Gray clamps for standard conduit.
Carlon UA7AJ-CAR Standard Radius Conduit Elbow Carlon E983FR-CTN Rigid IMC Conduit Body Carlon E987E-CTN Rigid Conduit Body
For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant. UL Listed E35297. For easy access and pulling of wires through conduit run. For use with Schedule 40/80 non-metallic solvent weld fittings. Will not rust or corrode. For easy access and pulling of wires through conduit run. For use with Schedule 40/80 non-metallic solvent weld fittings. Will not rust or corrode. UL Listed.
Carlon UA7AJB-CAR Standard Radius Conduit Elbow Carlon E942L-CAR Conduit Adapter Eritech CWP1J Grounding Pipe Clamp
For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant. UL Listed E35297. Safe, non-conductive. For adapting Schedule 40 non-metallic conduit to boxes, threaded fittings, metallic systems. Female threads one end, socket end on the other. Will not rust or corrode. Bolted water pipe grounding clamp. UL listed. Made of corrosion-resistant copper alloy.
Carlon E990DR-CAR Access Pull Standard Radius Conduit Elbow Gardner Bender GCC-610 2-Hole Conduit Strap Carlon UA9AJ-CAR Standard Radius Conduit Elbow
Access pull point for cable in tight radius. Allows conduit changes in direction. Won't rust or corrode. Gasket included. Heavy-duty polyethylene, resists deterioration from UV rays and breakage from extreme cold. Enables secure fastening of plastic electrical conduit, schedule 40 PVC, copper tubing. For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant.
Carlon UA9AJB-CAR Standard Radius Conduit Elbow Carlon E987F-CAR Rigid Conduit Body Halex 27622 Multi-Piece Liquid Tight Straight Conduit Connector
For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant. Schedule 40. UL 651 Listed to the NEC by the ETL, UL Listed. For easy access and pulling of wires through conduit run. For use with Schedule 40/80 non-metallic solvent weld fittings. Will not rust or corrode. UL Listed. Fitting will not rust or corrode. No disassembly required. Reusable, hand tightened nut. Use to connect type B non-metallic liquid-tight conduit to a weatherproof outlet box, pool/spa equipment motor, central air conditioning unit or various other electrical enclosures or hubs. UL Approved.
Carlon E990ER-CAR Access Pull Standard Radius Conduit Elbow Halex 93592 Ground Clamp Halex 26141 Flat Drive Strap
Access pull point for cable in tight radius. Allows conduit changes in direction. Won't rust or corrode. Gasket included. Connects grounding wire to the grounding rod. Indoors or outdoors. To secure EMT conduit to a wood or masonry surface.
Halex 26151 1-Hole Snap-On Conduit Strap Carlon UB9AG-CAR Standard Radius Conduit Elbow Halex 61130 1-Hole Conduit Strap
Indoor or outdoor applications. To support EMT conduit. For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant. Steel, indoor or outdoor. Use to secure Rigid or IMC conduit to wood, masonry or similar surfaces where greater load bearing is required. Tray boxed.
Thomas & Betts E986GR Type LB Rigid/IMC Conduit Body Halex Liquid Tight Connector Halex 27691 Liquid Tight Conduit Elbow
Rigid non-metallic Type LB conduit body. For easy access and pulling of wires through conduit run. For use with Schedule 40 non-metallic solvent weld fittings. Will not rust or corrode. With textured lid and foam-in-place gasket. Hubs are not threaded. UL Listed, RoHS Compliance. Indoors or outdoors, fitting will not rust or corrode. No disassembly required, just hand-tighten nut. Reusable. Use to connect type B non-metallic liquid-tight conduit to a weatherproof outlet box, pool/spa equipment motor, central air conditioning unit or various other electrical enclosures or hubs. UL Approved. Indoors or outdoors, fitting will not rust or corrode. No disassembly required, just hand-tighten nut. Reusable. Use to connect type B non-metallic liquid-tight conduit to a weatherproof outlet box, pool/spa equipment motor, central air conditioning unit or various other electrical enclosures or hubs. UL Approved.
Halex 20491 Combination Coupling Halex 16207B Multi-Piece Liquid Tight Conduit Connector Halex 26152 1-Hole Snap-On Conduit Strap
Use to joint EMT conduit to flexible metal conduit. Die cast zinc. UL Approved, CSA Certified. Multi-piece. Zinc die cast. Use to connect liquid-tight conduit to a steel outlet box or other metal enclosure or hub. UL Listed. Bulk packed. Indoor or outdoor applications. To support EMT conduit.
Halex 26161 2-Hole Snap-On Conduit Strap Carlon E990DER-CAR Pull Elbow With Reducer Bushing Halex 91627 Multi-Piece Liquid Tight Conduit Connector
To support EMT conduit where greater load bearing is required. Indoor or outdoor applications. Access pull point for cable in tight radius. Allows conduit changes in direction. Won't rust or corrode. Gasket included. Zinc die cast. Use to connect liquid-tight conduit to a steel outlet box, metal enclosure or hub. UL Approved.
Halex 26250 Concrete Tight Rain Tight Compression Connector Halex 26162 2-Hole Snap-On Conduit Strap Halex 26571 Flexible MC Snap-In Connector
Concrete-tight and rain-tight. Use to connect EMT conduit to steel outlet box, load center, or other metal enclosure in a wet location. To support EMT conduit where greater load bearing is required. Indoor or outdoor applications. Halex MC Snap-In Connector, Flexible, 3/8 in Nominal, Steel, Includes: Insulating Bushing, CSA Certified, UL Listed, For use to connect aluminum or steel ac, aluminum mc, and steel flexible metal conduit, indoor use only
Halex 36019 Ground Clamp Carlon UAFAD Flexible Conduit Elbow Carlon Carflex LN43FA-CAR 1-Piece Straight Conduit Connector
Indoor or outdoor applications. Use to secure the grounding wire to a 1/2" through 1" pipe. UL Listed. Wire size fits #10 - #2 AWG. Made of a highly durable plastic (PVC) compound making the product nonmetallic and safe to install. Elbow is non-corrosive, rustproof, and easily pliable. Good for those applications that requires change of direction. UL listed. For flexible conduit. Non-metallic/non-conductive, corrosion resistant plastic.
Halex 16905B Multi-Piece Liquid Tight Conduit Elbow Carlon E983GR-CAR Rigid IMC Conduit Body Thomas & Betts E986HR Type LB Rigid/IMC Conduit Body
Multi-piece, zinc die cast. Use to connect liquid-tight conduit to a steel outlet box or other metal enclosure or hub. UL Listed. For easy access and pulling of wires through conduit run. For use with Schedule 40/80 non-metallic solvent weld fittings. Will not rust or corrode. Rigid non-metallic Type LB conduit body. For easy access and pulling of wires through conduit run. For use with Schedule 40 non-metallic solvent weld fittings. Will not rust or corrode. With textured lid and foam-in-place gasket. Hubs are not threaded. UL Listed, RoHS Compliance.
Halex 26142 Flat Drive Strap Eritech CWP1JU Grounding Pipe Clamp Halex 04212 Squeeze Connector
Indoors or outdoors. To secure EMT conduit to a wood or masonry surface. Bolted water pipe clamps made from high-strength corrosion-resistant copper alloy. Connects grounding wire to the grounding rod. Range 10 solid - 2 stranded. UL Listed. Zinc die cast. In a dry location, use to connect flexible metallic conduit (Greenfield or BX) to steel outlet box, load center or other metal enclosure. Fits 1/2" knock outs. UL Approved.
Carlon E977DC25-UPC Conduit Clamp Thomas & Betts E977NDC-CTN 1-Piece Conduit Clamp Thomas & Betts E977NEC-CTN 1-Piece Conduit Clamp
Offers same chemical resistance as Carlon nonmetallic conduit for a complete, corrosion resistant system. UV resistant for use in direct sunlight. Use in accordance with conduit spacing requirements per NEC. Each clamp requires 2 screws, 2 nuts, and 2 washers. Gray clamps for standard conduit. Drill  5/16'' hole with masonry bit and tap in with hammer. Drill  5/16'' hole with masonry bit and tap in with hammer.
Carlon UB9AH-CAR Standard Radius Conduit Elbow Halex 91695 Multi-Piece Liquid Tight Conduit Elbow Carlon E977EC20-UPC Conduit Clamp
For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant. Multi-piece, zinc die cast. Use to connect liquid-tight conduit to a steel outlet box or other metal enclosure or hub. UL Listed. Offers same chemical resistance as Carlon nonmetallic conduit for a complete, corrosion resistant system. UV resistant for use in direct sunlight. Use in accordance with conduit spacing requirements per NEC. Each clamp requires 2 screws, 2 nuts, and 2 washers. Gray clamps for standard conduit.
Halex 27692 Liquid Tight Conduit Elbow Carlon UAFAE Flexible Conduit Elbow Carlon UA9AK-CAR Standard Radius Conduit Elbow
Indoors or outdoors, fitting will not rust or corrode. No disassembly required, just hand-tighten nut. Reusable. Use to connect type B non-metallic liquid-tight conduit to a weatherproof outlet box, pool/spa equipment motor, central air conditioning unit or various other electrical enclosures or hubs. UL Approved. Made of a highly durable plastic (PVC) compound making the product nonmetallic and safe to install. Elbow is non-corrosive, rustproof, and easily pliable. Good for those applications that requires change of direction. UL listed. For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant.
Carlon E987G-CAR Rigid Conduit Body Halex 63299 Ground Screw Carlon E970CD-CTN Rigid Round Conduit Body with Cover
For easy access and pulling of wires through conduit run. For use with Schedule 40/80 non-metallic solvent weld fittings. Will not rust or corrode. UL Listed. Indoor or outdoor applications. Use to ground a wiring device to a steel outlet box. Green color. Four knock-out type socket openings, 90 degree spacing. Includes separate mounting feet, cover and gasket. Non-conductive. Will not rust or corrode.
Carlon E987H-CAR Rigid Conduit Body Carlon E970CE-CTN Rigid Round Conduit Body with Cover Halex 61212B 2-Hole Conduit Strap
For easy access and pulling of wires through conduit run. For use with Schedule 40/80 non-metallic solvent weld fittings. Will not rust or corrode. UL Listed. Four knock-out type socket openings, 90 degree spacing. Includes separate mounting feet, cover and gasket. Non-conductive. Will not rust or corrode. Indoor or outdoor use. Use to secure Rigid or IMC conduit to wood, masonry or similar surfaces where greater load bearing is required. UL Listed, CSA Approved.
Carlon E983H-CAR Rigid IMC Conduit Body Eritech 811260UPC Grounding Rod Eritech EK17 Direct Burial Perpendicular Ground Clamp
For easy access and pulling of wires through conduit run. For use with Schedule 40/80 non-metallic solvent weld fittings. Will not rust or corrode. Zinc-coated exteriors are hot-dip galvanized for solid protection against corrosion in accordance with ASTM specification A153-78. Surfaces are rigidly inspected to eliminate seams, slivers and other defects. Meet EEI-NEMA TDJ-30 and are REA listed. 15 year service life in most soils. Galvanized plated steel. Bronze alloy grounding clamp with bronze screws. Used for rebar, ground rods, water pipes and direct-burial water pipe. Lay-in feature cuts installation time. Approved for direct burial in earth and concrete. Pipe range from 1/2" (12.7 mm) to 1" (25.4 mm). Rebar range from #4 (10 mm) to #8 (25 mm). Ground rod range from 1/2" (12.7 mm) to 1" (25.4 mm). Conductor range from #10 (5.5 mm sq) to #2 (25 mm sq). UL listed.
Eritech EK16 Direct Burial Ground Clamp Halex 20492 Combination Coupling Carlon UB9AJ-CAR Standard Radius Conduit Elbow
Bronze alloy grounding clamp with bronze screws. Used for rebar, ground rods, water pipes and direct-burial water pipe. Lay-in feature cuts installation time. Approved for direct burial in earth and concrete. Pipe range from 1/2" (12.7 mm) to 1" (25.4 mm). Rebar range from #4 (10 mm) to #8 (25 mm). Ground rod range from 1/2" (12.7 mm) to 1" (25.4 mm). Conductor range from #10 (5.5 mm sq) to #2 (25 mm sq). UL listed. Use to joint EMT conduit to flexible metal conduit. Die cast zinc. UL Approved, CSA Certified. For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant.
Halex 61205B 2-Hole Conduit Strap Halex 36020 Ground Clamp Thomas & Betts E970CDE-CTN Rigid/Non-Metallic Junction Box
Indoor or outdoor use. Use to secure Rigid or IMC conduit to wood, masonry or similar surfaces where greater load bearing is required. UL Listed, CSA Approved. Wire size fits #10 - #2 AWG. Use to secure the grounding wire to a 1-1/4" - 2" or 2-1/2" - 4" pipe. Bronze. UL Listed. Four knock-out type socket openings, 90 degree spacing. Includes separate mounting feet, cover and gasket. Non-conductive. Will not rust or corrode.
Carlon UA7AKB-CAR Standard Radius Conduit Elbow Halex 61615B 2-Hole Snap-On Conduit Strap Halex 16210B Multi-Piece Liquid Tight Conduit Connector