Home > PLUMBING > KITCHEN & BATH > FAUCETS > SOAP DISPENSERS
Sort By:
1
Carlon E940D-CTN Standard Conduit Coupling Carlon E943D-CTN Terminal Adapter Carlon E940E-CTN/CAR Standard Conduit Coupling
Safe, non-conductive. Schedule 40 non-metallic socket type coupling for joining Schedule 40 non-metallic conduit. Will not rust or corrode. RoHS Compliance, UL Listed. Safe, non-conductive. For adapting schedule 40 non-metallic conduit to boxes, threaded fittings, metallic systems. Male threads on one end, socket end on the other. Will not rust or corrode. UL Listed, RoHS Compliance. Safe, non-conductive. Schedule 40 non-metallic socket type coupling for joining Schedule 40 non-metallic conduit. Will not rust or corrode. RoHS Compliance, UL Listed.
Carlon E942DR-CTN Conduit Adapter Carlon E942ER-CTN Conduit Adapter Carlon E940FR-CTN Standard Conduit Coupling
Safe, non-conductive. For adapting Schedule 40 non-metallic conduit to boxes, threaded fittings, metallic systems. Female threads one end, socket end on the other. Will not rust or corrode. Safe, non-conductive. For adapting Schedule 40 non-metallic conduit to boxes, threaded fittings, metallic systems. Female threads one end, socket end on the other. Will not rust or corrode. Safe, non-conductive. Schedule 40 non-metallic socket type coupling for joining Schedule 40 non-metallic conduit. Will not rust or corrode. RoHS Compliance, UL Listed.
Carlon E943E-CTN Terminal Adapter Carlon E943FR-CTN Terminal Adapter Carlon E996DR-CTN Conduit Box Adapter
Safe, non-conductive. For adapting schedule 40 non-metallic conduit to boxes, threaded fittings, metallic systems. Male threads on one end, socket end on the other. Will not rust or corrode. UL Listed, RoHS Compliance. Safe, non-conductive. For adapting schedule 40 non-metallic conduit to boxes, threaded fittings, metallic systems. Male threads on one end, socket end on the other. Will not rust or corrode. UL Listed, RoHS Compliance. For PVC enclosures. cULus Listed.
Carlon E940GR-CTN Standard Conduit Coupling Carlon E942FR-CTN Conduit Adapter Carlon UA9ADB-CTN Standard Radius Rigid Conduit Elbow
Safe, non-conductive. Schedule 40 non-metallic socket type coupling for joining Schedule 40 non-metallic conduit. Will not rust or corrode. RoHS Compliance, UL Listed. Safe, non-conductive. For adapting Schedule 40 non-metallic conduit to boxes, threaded fittings, metallic systems. Female threads one end, socket end on the other. Will not rust or corrode. For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant. Schedule 40. UL 651 Listed to the NEC by the ETL, UL Listed.
Carlon E996ER-CTN Conduit Box Adapter Halex 90440 Screw-In Connector Carlon UA9ADR-CTN Standard Radius Conduit Elbow
For PVC enclosures. cULus Listed. Zinc die cast. Use to connect flexible metallic conduit (Greenfield) to steel outlet box, load center or other metal enclosure. Fits 1/2" knock outs. For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant.
Carlon E940HR-CTN Standard Conduit Coupling Carlon E943GR-CTN Terminal Adapter Carlon UA7ADB-CTN Standard Radius Conduit Elbow
Safe, non-conductive. Schedule 40 non-metallic socket type coupling for joining Schedule 40 non-metallic conduit. Will not rust or corrode. RoHS Compliance, UL Listed. Safe, non-conductive. For adapting schedule 40 non-metallic conduit to boxes, threaded fittings, metallic systems. Male threads on one end, socket end on the other. Will not rust or corrode. UL Listed, RoHS Compliance. For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant. UL Listed E35297.
Carlon UA9AER-CTN Standard Radius Conduit Elbow Halex 90441 Screw-In Connector Carlon UA7ADR-CAR Standard Radius Conduit Elbow
For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant. Zinc die cast. Use to connect flexible metallic conduit (Greenfield) to steel outlet box, load center or other metal enclosure. Fits 1/2" knock outs. For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant. UL Listed E35297.
Carlon E943HR-CTN Terminal Adapter Halex 90451 Screw-In Coupling Carlon UA9AEB-CTN Standard Radius Rigid Conduit Elbow
Safe, non-conductive. For adapting schedule 40 non-metallic conduit to boxes, threaded fittings, metallic systems. Male threads on one end, socket end on the other. Will not rust or corrode. UL Listed, RoHS Compliance. Zinc die cast. Use to join two pieces of flexible metallic conduit (Greenfield) together. For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant. Schedule 40. UL 651 Listed to the NEC by the ETL, UL Listed.
Carlon E942GR-CTN Conduit Adapter Thomas & Betts E950ED-CTN Reducing Bushing Carlon UA7AER-CAR Standard Radius Conduit Elbow
Safe, non-conductive. For adapting Schedule 40 non-metallic conduit to boxes, threaded fittings, metallic systems. Female threads one end, socket end on the other. Will not rust or corrode. For connecting different sizes of conduit. Socket both ends, for reducing male Schedule 40/80 conduit runs or fittings to female. Non-conductive. Will not rust or corrode. For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant. UL Listed E35297.
Carlon E940JR-CTN Standard Conduit Coupling Carlon E942HR Conduit Adapter Halex 90580 Cable Connector
Safe, non-conductive. Schedule 40 non-metallic socket type coupling for joining Schedule 40 non-metallic conduit. Will not rust or corrode. RoHS Compliance, UL Listed. Safe, non-conductive. For adapting Schedule 40 non-metallic conduit to boxes, threaded fittings, metallic systems. Female threads one end, socket end on the other. Will not rust or corrode. Zinc die cast. In a dry location, use to connect BX cable to a steel outlet box or other metal enclosure. 3/8" size fits 1/2" knock outs. UL Approved.
Carlon UA7AEB-CTN Standard Radius Conduit Elbow Halex 90481 Concrete Tight Set Screw Connector Carlon UA9AFR-CTN Standard Radius Conduit Elbow
For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant. UL Listed E35297. Zinc die cast. In a dry location, use to connect flexible metallic conduit (Greenfield or BX) to a steel outlet box or other metal enclosure. UL Approved. For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant.
Carlon E943JRR Terminal Adapter Halex 90211 Compression Connector Halex 90570 Combination Clamp Connector
Safe, non-conductive. For adapting schedule 40 non-metallic conduit to boxes, threaded fittings, metallic systems. Male threads on one end, socket end on the other. Will not rust or corrode. UL Listed, RoHS Compliance. Zinc die cast. Use to connect EMT conduit to steel outlet box, load center or other metal enclosure. UL Approved. Zinc die cast. In a dry location, use to connect flexible metallic conduit (Greenfield, BX, NM or Metal Clad) to a steel outlet box or other metal enclosure. 3/8" size fits 1/2" knock outs. UL Approved.
Carlon E942JR Conduit Adapter Carlon UA7AFR-CAR Standard Radius Conduit Elbow Carlon UA9AFB-CTN Standard Radius Conduit Elbow
Safe, non-conductive. For adapting Schedule 40 non-metallic conduit to boxes, threaded fittings, metallic systems. Female threads one end, socket end on the other. Will not rust or corrode. For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant. UL Listed E35297. For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant. Schedule 40. UL 651 Listed to the NEC by the ETL, UL Listed.
Halex 90442 Screw-In Connector Halex 91100 Conduit Elbow Halex 90420 Squeeze Connector
Zinc die cast. Use to connect flexible metallic conduit (Greenfield) to steel outlet box, load center or other metal enclosure. Fits 1/2" knock outs. Zinc die cast. In a dry location, use to connect flexible metallic conduit (Greenfield or BX) to a steel outlet box or other metal enclosure. Zinc die cast. In a dry location, use to connect flexible metallic conduit (Greenfield or BX) to steel outlet box, load center or other metal enclosure. Fits 1/2" knock outs. UL Approved.
Halex 65705B Snap-In Cable Connector Carlon UA7AFB-CTN Standard Radius Conduit Elbow Thomas & Betts E994DR-CTN Conduit Offset
In a dry location, use to connect aluminum or steel AC, aluminum MC, and steel flexible metal conduit. Suitable for: aluminum and steel armored cable with 14/2 - 10/2 wire, steel flexible metal conduit, .45 diameter aluminum interlocked MC cable. Features snap-in installation, no locknut, insulating bushing included. For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant. UL Listed E35297. Non-conductive. Will not rust or corrode.
Halex 90421 Squeeze Connector Halex 90221 Concrete Tight Compression Coupling Carlon E950FD-CAR Reducing Conduit Bushing
Zinc die cast. In a dry location, use to connect flexible metallic conduit (Greenfield or BX) to steel outlet box, load center or other metal enclosure. Fits 1/2" knock outs. UL Approved. Use to join two lengths of EMT conduit together. Zinc. UL, CSA Approved. For connecting different sizes of conduit. Socket both ends, for reducing male Schedule 40/80 conduit runs or fittings to female. Non-conductive. Will not rust or corrode.
Halex 75403 Anti-Short Conduit Bushing Halex 90212 Concrete Tight Rain Tight Compression Connector Carlon UA9AGR-CTN Standard Radius Conduit Elbow
High dielectric plastic. Use to protect wire within flexible metallic conduit (Greenfield, BX). Insert one bushing at each end of conduit. UL Approved. No. 75400 - Fits cable range: 14/2, 14/3, 12/2 No. 75401 - Fits cable range: 14/4, 12/3, 6/1, 4/1. No. 75402 - Fits cable range: 12/4, 10/2, 10/3, 2/1. No. 75403 - Fits cable range: 10/4, 8/2, 8/3, 1/1. No. 75404 - Fits cable range: 8/4, 6/2, 6/3, 4/2, 4/3, 6/4. Zinc die cast. Use to connect EMT conduit to steel outlet box, load center or other metal enclosure. UL Approved. For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant.
Carlon UA7AGR-CAR Standard Radius Conduit Elbow Carlon E940K-CTN Conduit Coupling CONNECTOR DPLX FLX N-MTL 3/8IN
For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant. UL Listed E35297. Safe, non-conductive. Schedule 40 non-metallic socket type coupling for joining Schedule 40 non-metallic conduit. Will not rust or corrode. RoHS Compliance, UL Listed. In a dry location, use to connect two pieces of flexible armored cable (Greenfield or BX) to a steel outlet box or other metal enclosure, when using only one knock-out opening. UL Approved.
Halex 91531 Combination Coupling Halex 90422 Squeeze Connector Halex 90222 Concrete Tight Compression Coupling
Zinc die cast. Use to join EMT conduit to flexible metal conduit. Indoor use only. With UPC. UL Approved. Zinc die cast. In a dry location, use to connect flexible metallic conduit (Greenfield or BX) to steel outlet box, load center or other metal enclosure. Fits 1/2" knock outs. UL Approved. Use to join two lengths of EMT conduit together. Zinc. UL, CSA Approved.
Halex 91101 Conduit Elbow Thomas & Betts E950FE-CTN Reducing Bushing Carlon E943K-CTN Terminal Adapter
Zinc die cast. In a dry location, use to connect flexible metallic conduit (Greenfield or BX) to a steel outlet box or other metal enclosure. For connecting different sizes of conduit. Socket both ends, for reducing male Schedule 40/80 conduit runs or fittings to female. Non-conductive. Will not rust or corrode. Safe, non-conductive. For adapting schedule 40 non-metallic conduit to boxes, threaded fittings, metallic systems. Male threads on one end, socket end on the other. Will not rust or corrode. UL Listed, RoHS Compliance.
Carlon UA7AGB-CAR Standard Radius Conduit Elbow Carlon LN43DA-CTN Liquidtight Straight Angle Conduit Connector Thomas & Betts E994ER-CTN Conduit Offset
For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant. UL Listed E35297. For flexible conduit. Non-metallic/non-conductive, corrosion resistant plastic. Non-conductive. Will not rust or corrode.
Halex 75400 Anti-Short Conduit Bushing Carlon UA9AH-CAR Standard Radius Conduit Elbow Carlon UA7AHR-CTN Standard Radius Conduit Elbow
High dielectric plastic. Use to protect wire within flexible metallic conduit (Greenfield, BX). Insert one bushing at each end of conduit. UL Approved. No. 75400 - Fits cable range: 14/2, 14/3, 12/2 No. 75401 - Fits cable range: 14/4, 12/3, 6/1, 4/1. No. 75402 - Fits cable range: 12/4, 10/2, 10/3, 2/1. No. 75403 - Fits cable range: 10/4, 8/2, 8/3, 1/1. No. 75404 - Fits cable range: 8/4, 6/2, 6/3, 4/2, 4/3, 6/4. For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant. For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant. UL Listed E35297.
Carlon E985D-CTN Rigid Conduit Body Carlon E984D-CTN Rigid Conduit Body Halex 02110 Compression Connector
For easy access and pulling of wires through conduit run. Textured lid, foam-in-place gasket. For use with Schedule 40/80 non-metallic solvent weld fittings. Will not rust or corrode. For easy access and pulling of wires through conduit run. For use with Schedule 40/80 non-metallic solvent weld fittings. Will not rust or corrode. Zinc die cast. Use to connect EMT conduit to steel outlet box, load center or other metal enclosure. UL Approved.
Halex 90401 Offset Nipple Carlon UB9AD-CAR Standard Radius Conduit Elbow Thomas & Betts E986D-CTN Type LB Rigid/IMC Conduit Body
Zinc die cast. Use as an offset connector between two enclosures. Offsets the axis of the raceway 3/4". UL Approved. For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant. Rigid non-metallic Type LB conduit body. For easy access and pulling of wires through conduit run. For use with Schedule 40 non-metallic solvent weld fittings. Will not rust or corrode. With textured lid and foam-in-place gasket. Hubs are not threaded. UL Listed, RoHS Compliance.
Halex 90452 Screw-In Coupling Carlon E940LR/CTN Conduit Coupling Halex 11005B Conduit Elbow
Zinc die cast. Use to join two pieces of flexible metallic conduit (Greenfield) together. Safe, non-conductive. Schedule 40 non-metallic socket type coupling for joining Schedule 40 non-metallic conduit. Will not rust or corrode. RoHS Compliance, UL Listed. Zinc die cast. In a dry location, use to connect flexible metallic conduit (Greenfield or BX) to a steel outlet box or other metal enclosure.
Carlon E950GE-CAR Reducing Conduit Bushing Carlon LN43EA-CTN Liquidtight Straight Angle Conduit Connector Thomas & Betts E950GF-CTN Reducing Bushing
For connecting different sizes of conduit. Socket both ends, for reducing male Schedule 40/80 conduit runs or fittings to female. Non-conductive. Will not rust or corrode. For flexible conduit. Non-metallic/non-conductive, corrosion resistant plastic. For connecting different sizes of conduit. Socket both ends, for reducing male Schedule 40/80 conduit runs or fittings to female. Non-conductive. Will not rust or corrode.
Carlon UA9AGB-CTN Standard Radius Conduit Elbow Carlon E987D-CTN Rigid Conduit Body Halex 02210 Concrete Tight Compression Coupling
For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant. Schedule 40. UL 651 Listed to the NEC by the ETL, UL Listed. For easy access and pulling of wires through conduit run. For use with Schedule 40/80 non-metallic solvent weld fittings. Will not rust or corrode. UL Listed. Use to join two lengths of EMT conduit together. Zinc. UL, CSA Approved.
Halex 20581 Cable Connector Carlon UA7AHB-CAR Standard Radius Conduit Elbow Carlon E983D-CTN Rigid IMC Conduit Body
In a dry location, use to connect AC (BX) cable to a steel outlet box or other metal enclosure. Suitable for #14-2 steel armored cable. For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant. UL Listed E35297. For easy access and pulling of wires through conduit run. For use with Schedule 40/80 non-metallic solvent weld fittings. Will not rust or corrode.
Thomas & Betts E950HGR Reducing Bushing Halex 75401 Anti-Short Conduit Bushing Carlon Carflex LN20DA-CTN Liquidtight Conduit Elbow
For connecting different sizes of conduit. Socket both ends, for reducing male Schedule 40/80 conduit runs or fittings to female. Non-conductive. Will not rust or corrode. High dielectric plastic. Use to protect wire within flexible metallic conduit (Greenfield, BX). Insert one bushing at each end of conduit. UL Approved. No. 75400 - Fits cable range: 14/2, 14/3, 12/2 No. 75401 - Fits cable range: 14/4, 12/3, 6/1, 4/1. No. 75402 - Fits cable range: 12/4, 10/2, 10/3, 2/1. No. 75403 - Fits cable range: 10/4, 8/2, 8/3, 1/1. No. 75404 - Fits cable range: 8/4, 6/2, 6/3, 4/2, 4/3, 6/4. For flexible conduit. Non-metallic, Non-conductive, corrosion resistant plastic.
Halex 91102 Pull Conduit Elbow Carlon UA9AHB-CTN Standard Radius Rigid Conduit Elbow Halex Straight Liquid Tight Connector
Zinc die cast. In a dry location, use to connect flexible metallic conduit (Greenfield or BX) to a steel outlet box or other metal enclosure. For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant. Schedule 40. UL 651 Listed to the NEC by the ETL, UL Listed. Fitting will not rust or corrode. No disassembly required. Reusable, hand tightened nut. Use to connect type B non-metallic liquid-tight conduit to a weatherproof outlet box, pool/spa equipment motor, central air conditioning unit or various other electrical enclosures or hubs. UL Approved.
Carlon E942K-CAR Conduit Adapter Carlon E943L-CAR Terminal Adapter Carlon UB9AE-CAR Standard Radius Conduit Elbow
Safe, non-conductive. For adapting Schedule 40 non-metallic conduit to boxes, threaded fittings, metallic systems. Female threads one end, socket end on the other. Will not rust or corrode. Safe, non-conductive. For adapting schedule 40 non-metallic conduit to boxes, threaded fittings, metallic systems. Male threads on one end, socket end on the other. Will not rust or corrode. UL Listed, RoHS Compliance. For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant.
Carlon E950JHR Reducing Conduit Bushing Halex 91625 Multi-Piece Liquid Tight Compression Connector Halex 02905B Compression Conduit Elbow
For connecting different sizes of conduit. Socket both ends, for reducing male Schedule 40/80 conduit runs or fittings to female. Non-conductive. Will not rust or corrode. Zinc die cast. Use to connect liquid-tight conduit to a steel outlet box, metal enclosure or hub. UL Approved. Zinc die cast. Concrete-tight. Indoor or outdoor applications. Use to connect EMT conduit to a metal outlet box or enclosure where a 90 degree bend is required and a pipe bending tool is not used. UL, CSA Listed.
Halex 75402 Anti-Short Conduit Bushing Halex 16205B Multi-Piece Liquid Tight Conduit Connector Halex 27621 Multi-Piece Liquid Tight Straight Conduit Connector
High dielectric plastic. Use to protect wire within flexible metallic conduit (Greenfield, BX). Insert one bushing at each end of conduit. UL Approved. No. 75400 - Fits cable range: 14/2, 14/3, 12/2 No. 75401 - Fits cable range: 14/4, 12/3, 6/1, 4/1. No. 75402 - Fits cable range: 12/4, 10/2, 10/3, 2/1. No. 75403 - Fits cable range: 10/4, 8/2, 8/3, 1/1. No. 75404 - Fits cable range: 8/4, 6/2, 6/3, 4/2, 4/3, 6/4. Multi-piece. Zinc die cast. Use to connect liquid-tight conduit to a steel outlet box or other metal enclosure or hub. UL Listed. Bulk packed. Fitting will not rust or corrode. No disassembly required. Reusable, hand tightened nut. Use to connect type B non-metallic liquid-tight conduit to a weatherproof outlet box, pool/spa equipment motor, central air conditioning unit or various other electrical enclosures or hubs. UL Approved.
Halex 90402 Offset Nipple Carlon Carflex LN20EA-CTN Liquidtight Conduit Elbow Carlon E983E-CTN Rigid IMC Conduit Body
Zinc die cast. Use as an offset connector between two enclosures. Offsets the axis of the raceway 3/4". UL Approved. For flexible conduit. Non-metallic, Non-conductive, corrosion resistant plastic. For easy access and pulling of wires through conduit run. For use with Schedule 40/80 non-metallic solvent weld fittings. Will not rust or corrode.
Carlon UB9AF-CAR Standard Radius Conduit Elbow Thomas & Betts E986E-CTN Type LB Rigid/IMC Conduit Body Carlon E985E-CTN Rigid Conduit Body
For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant. Rigid non-metallic Type LB conduit body. For easy access and pulling of wires through conduit run. For use with Schedule 40 non-metallic solvent weld fittings. Will not rust or corrode. With textured lid and foam-in-place gasket. Hubs are not threaded. UL Listed, RoHS Compliance. For easy access and pulling of wires through conduit run. Textured lid, foam-in-place gasket. For use with Schedule 40/80 non-metallic solvent weld fittings. Will not rust or corrode.
Carlon E984E-CTN Rigid Conduit Body Thomas & Betts E986F-CTN Type LB Rigid/IMC Conduit Body Carlon UA7AJ-CAR Standard Radius Conduit Elbow
For easy access and pulling of wires through conduit run. For use with Schedule 40/80 non-metallic solvent weld fittings. Will not rust or corrode. Rigid non-metallic Type LB conduit body. For easy access and pulling of wires through conduit run. For use with Schedule 40 non-metallic solvent weld fittings. Will not rust or corrode. With textured lid and foam-in-place gasket. Hubs are not threaded. UL Listed, RoHS Compliance. For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant. UL Listed E35297.
Halex 02112 Compression Connector Carlon E983FR-CTN Rigid IMC Conduit Body Carlon E987E-CTN Rigid Conduit Body
Zinc die cast. Use to connect EMT conduit to steel outlet box, load center or other metal enclosure. UL Approved. For easy access and pulling of wires through conduit run. For use with Schedule 40/80 non-metallic solvent weld fittings. Will not rust or corrode. For easy access and pulling of wires through conduit run. For use with Schedule 40/80 non-metallic solvent weld fittings. Will not rust or corrode. UL Listed.
Carlon UA7AJB-CAR Standard Radius Conduit Elbow Halex 90292 Concrete Tight Compression Short Radius Conduit Elbow Halex 90291 Concrete Tight Compression Short Radius Conduit Elbow
For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant. UL Listed E35297. Zinc die cast. Concrete-tight. Indoor or outdoor applications. Use to connect EMT conduit to a metal outlet box or enclosure where a 90 degree bend is required and a pipe bending tool is not used. UL, CSA Listed. Zinc die cast. Concrete-tight. Indoor or outdoor applications. Use to connect EMT conduit to a metal outlet box or enclosure where a 90 degree bend is required and a pipe bending tool is not used. UL, CSA Listed.
Carlon E942L-CAR Conduit Adapter Carlon E990DR-CAR Access Pull Standard Radius Conduit Elbow Carlon UA9AJ-CAR Standard Radius Conduit Elbow
Safe, non-conductive. For adapting Schedule 40 non-metallic conduit to boxes, threaded fittings, metallic systems. Female threads one end, socket end on the other. Will not rust or corrode. Access pull point for cable in tight radius. Allows conduit changes in direction. Won't rust or corrode. Gasket included. For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant.
Carlon UA9AJB-CAR Standard Radius Conduit Elbow Halex 02212 Concrete Tight Compression Coupling Carlon E987F-CAR Rigid Conduit Body
For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant. Schedule 40. UL 651 Listed to the NEC by the ETL, UL Listed. Use to join two lengths of EMT conduit together. Zinc. UL, CSA Approved. For easy access and pulling of wires through conduit run. For use with Schedule 40/80 non-metallic solvent weld fittings. Will not rust or corrode. UL Listed.
Halex 27622 Multi-Piece Liquid Tight Straight Conduit Connector Carlon E990ER-CAR Access Pull Standard Radius Conduit Elbow Carlon UB9AG-CAR Standard Radius Conduit Elbow
Fitting will not rust or corrode. No disassembly required. Reusable, hand tightened nut. Use to connect type B non-metallic liquid-tight conduit to a weatherproof outlet box, pool/spa equipment motor, central air conditioning unit or various other electrical enclosures or hubs. UL Approved. Access pull point for cable in tight radius. Allows conduit changes in direction. Won't rust or corrode. Gasket included. For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant.
Thomas & Betts E986GR Type LB Rigid/IMC Conduit Body Halex Liquid Tight Connector Halex 27691 Liquid Tight Conduit Elbow
Rigid non-metallic Type LB conduit body. For easy access and pulling of wires through conduit run. For use with Schedule 40 non-metallic solvent weld fittings. Will not rust or corrode. With textured lid and foam-in-place gasket. Hubs are not threaded. UL Listed, RoHS Compliance. Indoors or outdoors, fitting will not rust or corrode. No disassembly required, just hand-tighten nut. Reusable. Use to connect type B non-metallic liquid-tight conduit to a weatherproof outlet box, pool/spa equipment motor, central air conditioning unit or various other electrical enclosures or hubs. UL Approved. Indoors or outdoors, fitting will not rust or corrode. No disassembly required, just hand-tighten nut. Reusable. Use to connect type B non-metallic liquid-tight conduit to a weatherproof outlet box, pool/spa equipment motor, central air conditioning unit or various other electrical enclosures or hubs. UL Approved.
Halex 20491 Combination Coupling Halex 16207B Multi-Piece Liquid Tight Conduit Connector Carlon E990DER-CAR Pull Elbow With Reducer Bushing
Use to joint EMT conduit to flexible metal conduit. Die cast zinc. UL Approved, CSA Certified. Multi-piece. Zinc die cast. Use to connect liquid-tight conduit to a steel outlet box or other metal enclosure or hub. UL Listed. Bulk packed. Access pull point for cable in tight radius. Allows conduit changes in direction. Won't rust or corrode. Gasket included.
Halex 02115 Compression Connector Halex 91627 Multi-Piece Liquid Tight Conduit Connector Halex 20210 Concrete Tight Compression Connector
Zinc die cast. Use to connect EMT conduit to steel outlet box, load center or other metal enclosure. UL Approved. Zinc die cast. Use to connect liquid-tight conduit to a steel outlet box, metal enclosure or hub. UL Approved. Zinc die cast. Use to connect EMT conduit to steel outlet box, load center or other metal enclosure. UL Approved.
Halex 26250 Concrete Tight Rain Tight Compression Connector Halex 26571 Flexible MC Snap-In Connector Carlon UAFAD Flexible Conduit Elbow
Concrete-tight and rain-tight. Use to connect EMT conduit to steel outlet box, load center, or other metal enclosure in a wet location. Halex MC Snap-In Connector, Flexible, 3/8 in Nominal, Steel, Includes: Insulating Bushing, CSA Certified, UL Listed, For use to connect aluminum or steel ac, aluminum mc, and steel flexible metal conduit, indoor use only Made of a highly durable plastic (PVC) compound making the product nonmetallic and safe to install. Elbow is non-corrosive, rustproof, and easily pliable. Good for those applications that requires change of direction. UL listed.
Carlon Carflex LN43FA-CAR 1-Piece Straight Conduit Connector Halex 16905B Multi-Piece Liquid Tight Conduit Elbow Carlon E983GR-CAR Rigid IMC Conduit Body
For flexible conduit. Non-metallic/non-conductive, corrosion resistant plastic. Multi-piece, zinc die cast. Use to connect liquid-tight conduit to a steel outlet box or other metal enclosure or hub. UL Listed. For easy access and pulling of wires through conduit run. For use with Schedule 40/80 non-metallic solvent weld fittings. Will not rust or corrode.
Thomas & Betts E986HR Type LB Rigid/IMC Conduit Body Halex 04212 Squeeze Connector Halex 02120 Compression Connector
Rigid non-metallic Type LB conduit body. For easy access and pulling of wires through conduit run. For use with Schedule 40 non-metallic solvent weld fittings. Will not rust or corrode. With textured lid and foam-in-place gasket. Hubs are not threaded. UL Listed, RoHS Compliance. Zinc die cast. In a dry location, use to connect flexible metallic conduit (Greenfield or BX) to steel outlet box, load center or other metal enclosure. Fits 1/2" knock outs. UL Approved. Zinc die cast. Use to connect EMT conduit to steel outlet box, load center or other metal enclosure. UL Approved.
Halex 02215 Concrete Tight Compression Coupling Carlon UB9AH-CAR Standard Radius Conduit Elbow Halex 91695 Multi-Piece Liquid Tight Conduit Elbow
Use to join two lengths of EMT conduit together. Zinc. UL, CSA Approved. For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant. Multi-piece, zinc die cast. Use to connect liquid-tight conduit to a steel outlet box or other metal enclosure or hub. UL Listed.
Halex 20221 Concrete Tight Compression Coupling Halex 27692 Liquid Tight Conduit Elbow Carlon UAFAE Flexible Conduit Elbow
Use to join two lengths of EMT conduit together. Zinc. UL, CSA Approved. Indoors or outdoors, fitting will not rust or corrode. No disassembly required, just hand-tighten nut. Reusable. Use to connect type B non-metallic liquid-tight conduit to a weatherproof outlet box, pool/spa equipment motor, central air conditioning unit or various other electrical enclosures or hubs. UL Approved. Made of a highly durable plastic (PVC) compound making the product nonmetallic and safe to install. Elbow is non-corrosive, rustproof, and easily pliable. Good for those applications that requires change of direction. UL listed.
Carlon UA9AK-CAR Standard Radius Conduit Elbow Halex 20212 Concrete Tight Compression Connector Carlon E987G-CAR Rigid Conduit Body
For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant. Zinc die cast. Use to connect EMT conduit to steel outlet box, load center or other metal enclosure. UL Approved. For easy access and pulling of wires through conduit run. For use with Schedule 40/80 non-metallic solvent weld fittings. Will not rust or corrode. UL Listed.
Halex 02220 Concrete Tight Compression Coupling Carlon E970CD-CTN Rigid Round Conduit Body with Cover Carlon E987H-CAR Rigid Conduit Body
Use to join two lengths of EMT conduit together. Zinc. UL, CSA Approved. Four knock-out type socket openings, 90 degree spacing. Includes separate mounting feet, cover and gasket. Non-conductive. Will not rust or corrode. For easy access and pulling of wires through conduit run. For use with Schedule 40/80 non-metallic solvent weld fittings. Will not rust or corrode. UL Listed.
Carlon E970CE-CTN Rigid Round Conduit Body with Cover Carlon E983H-CAR Rigid IMC Conduit Body Halex 20492 Combination Coupling
Four knock-out type socket openings, 90 degree spacing. Includes separate mounting feet, cover and gasket. Non-conductive. Will not rust or corrode. For easy access and pulling of wires through conduit run. For use with Schedule 40/80 non-metallic solvent weld fittings. Will not rust or corrode. Use to joint EMT conduit to flexible metal conduit. Die cast zinc. UL Approved, CSA Certified.
Carlon UB9AJ-CAR Standard Radius Conduit Elbow Halex 20222 Concrete Tight Compression Coupling Thomas & Betts E970CDE-CTN Rigid/Non-Metallic Junction Box
For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant. Use to join two lengths of EMT conduit together. Zinc. UL, CSA Approved. Four knock-out type socket openings, 90 degree spacing. Includes separate mounting feet, cover and gasket. Non-conductive. Will not rust or corrode.
Carlon UA7AKB-CAR Standard Radius Conduit Elbow Halex 16210B Multi-Piece Liquid Tight Conduit Connector Thomas & Betts E986J-CTN Type LB Rigid/IMC Conduit Body
For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant. UL Listed E35297. Multi-piece. Zinc die cast. Use to connect liquid-tight conduit to a steel outlet box or other metal enclosure or hub. UL Listed. Bulk packed. Rigid non-metallic Type LB conduit body. For easy access and pulling of wires through conduit run. For use with Schedule 40 non-metallic solvent weld fittings. Will not rust or corrode. With textured lid and foam-in-place gasket. Hubs are not threaded. UL Listed, RoHS Compliance.
Carlon E950LJ-CAR Reducing Conduit Bushing Carlon E950KJ-CAR Reducing Conduit Bushing Halex 16907B Multi-Piece Liquid Tight Conduit Elbow
For connecting different sizes of conduit. Socket both ends, for reducing male Schedule 40/80 conduit runs or fittings to female. Non-conductive. Will not rust or corrode. For connecting different sizes of conduit. Socket both ends, for reducing male Schedule 40/80 conduit runs or fittings to female. Non-conductive. Will not rust or corrode. Multi-piece, zinc die cast. Use to connect liquid-tight conduit to a steel outlet box or other metal enclosure or hub. UL Listed.
Carlon UAFAF Conduit Elbow Halex 91697 Multi-Piece Liquid Tight Conduit Elbow Carlon UA9AKB-CAR Standard Radius Conduit Elbow
Made of a highly durable plastic (PVC) compound making the product nonmetallic and safe to install. Elbow is non-corrosive, rustproof, and easily pliable. Good for those applications that requires change of direction. UL listed. Indoors or outdoors. Multi-piece, use to connect flexible metallic or type B non-metallic liquid-tight conduit to a steel outlet box, metal enclosure or hub. For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant. Schedule 40. UL 651 Listed to the NEC by the ETL, UL Listed.
Carlon UA7AK-CAR Standard Radius Conduit Elbow Carlon Carflex LT43G Liquid Tight Straight Conduit Connector Carlon LN20FA-CAR 1-Piece Liquid Tight Conduit Elbow
For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant. UL Listed E35297. For flexible conduit. Non-metallic/non-conductive, corrosion resistant plastic. For flexible conduit. Non-metallic, Non-conductive, corrosion resistant plastic.
Halex 16210 Multi-Piece Liquid Tight Compression Connector Carlon UA9AL-CAR Standard Radius Conduit Elbow Carlon UA9DJ Large Radius Conduit Elbow
Multi-piece. Zinc die cast. Use to connect liquid-tight conduit to a steel outlet box or other metal enclosure or hub. UL Listed. Bulk packed. For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant. For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant. Manufactured to NEMA TC-2, Federal specification WC1O94A and UL 651 specifications. UL 651 Listed to the NEC by the ETL, UL Listed.
Carlon E983J-CAR Rigid IMC Conduit Body Legrand CDG5 1-Channel Cord Protector Carlon UA9DJB-UPC Large Radius Conduit Elbow
For easy access and pulling of wires through conduit run. For use with Schedule 40/80 non-metallic solvent weld fittings. Will not rust or corrode. Use to protect cords and reduce tripping hazard while keeping floor areas clean and safe. Durable, 14/32" height, low-profile, and flexible to conform to any floor surface. Easy to install, cuts to length. 1/2" opening hides many power and data cords. For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant. Manufactured to NEMA TC-2, Federal specification WC1O94A and UL 651 specifications. UL 651 Listed to the NEC by the ETL, UL Listed.
Carlon E987J-CAR Rigid Conduit Body Carlon UA7AL-CAR Standard Radius Conduit Elbow Carlon E945D-CAR Expansion Joint
For easy access and pulling of wires through conduit run. For use with Schedule 40/80 non-metallic solvent weld fittings. Will not rust or corrode. UL Listed. For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant. UL Listed E35297. Designed to compensate for length changes due to temperature variations in exposed conduit runs. 6'' maximum.
Carlon E945E-CAR Expansion Joint Legrand CDB-005 Overfloor Cord Protector Legrand CDI5 1-Channel Cord Protector
Designed to compensate for length changes due to temperature variations in exposed conduit runs. 6'' maximum. Use to protect cords and reduce tripping hazard while keeping floor areas clean and safe. Durable, 14/32" height, low-profile, and flexible to conform to any floor surface. Easy to install, cuts to length. 1/2" opening hides many power and data cords. Use to protect cords and reduce tripping hazard while keeping floor areas clean and safe. Durable, 14/32" height, low-profile, and flexible to conform to any floor surface. Easy to install, cuts to length. 1/2" opening hides many power and data cords.
Carlon UA9DK Large Radius Conduit Elbow Halex 16910 Multi-Piece Liquid Tight Conduit Elbow Halex 16212B Multi-Piece Liquid Tight Conduit Connector
For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant. Manufactured to NEMA TC-2, Federal specification WC1O94A and UL 651 specifications. UL 651 Listed to the NEC by the ETL, UL Listed. Multi-piece, zinc die cast. Use to connect liquid-tight conduit to a steel outlet box or other metal enclosure or hub. UL Listed. Multi-piece. Zinc die cast. Use to connect liquid-tight conduit to a steel outlet box or other metal enclosure or hub. UL Listed. Bulk packed.
Carlon UA9DKB-UPC Large Radius Conduit Elbow Carlon UA9ALB-CAR Standard Radius Conduit Elbow Carlon UB9AL-CAR Standard Radius Conduit Elbow
For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant. Manufactured to NEMA TC-2, Federal specification WC1O94A and UL 651 specifications. UL 651 Listed to the NEC by the ETL, UL Listed. For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant. Schedule 40. UL 651 Listed to the NEC by the ETL, UL Listed. For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant.
Carlon E945F-CAR Expansion Joint Carlon E945G Expansion Joint Carlon UA9DL Large Radius Conduit Elbow
Designed to compensate for length changes due to temperature variations in exposed conduit runs. 6'' maximum. Designed to compensate for length changes due to temperature variations in exposed conduit runs. 6'' maximum. For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant. Manufactured to NEMA TC-2, Federal specification WC1O94A and UL 651 specifications. UL 651 Listed to the NEC by the ETL, UL Listed.
Carlon UA9FJ-UPC Large Radius Conduit Elbow Halex 16215B Multi-Piece Liquid Tight Conduit Connector Carlon UB9AK-CAR Standard Radius Conduit Elbow
For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant. Manufactured to NEMA TC-2, Federal specification WC1O94A and UL 651 specifications. UL 651 Listed to the NEC by the ETL, UL Listed. Multi-piece. Zinc die cast. Use to connect liquid-tight conduit to a steel outlet box or other metal enclosure or hub. UL Listed. Bulk packed. For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant.
Foremost WW19R Right Hand Sidesplash Foremost WW19L Left Hand Sidesplash Foremost WW-22L Left Hand Sidesplash
Dimensions: 3-1/2"h x 3/4"d. Dimensions: 3-1/2"h x 3/4"d. Dimensions: 3-1/2"h x 3/4"d.
Foremost WS22R Right Hand Sidesplash Foremost WS22L Left Hand Sidesplash Foremost WS19L Left Hand Sidesplash
Dimensions: 3-1/2"h x 3/4"d. Dimensions: 3-1/2"h x 3/4"d. Dimensions: 3-1/2"h x 3/4"d.
Foremost WS19R Right Hand Sidesplash Foremost WW-22R Right Hand Sidesplash Carlon UB9DJ-CAR Standard Radius Conduit Elbow
Dimensions: 3-1/2"h x 3/4"d. Dimensions: 3-1/2"h x 3/4"d. For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant. Manufactured to NEMA TC-2, Federal specification WC1O94A and UL 651 specifications. UL 651 Listed to the NEC by the ETL, UL Listed.
EXPANSION JOINT 1-1/2 INCH    Carlon E945J-CAR Expansion Coupling CONNECTOR 90DEG 3/8IN 35/CTN
Designed to compensate for length changes due to temperature variations in exposed conduit runs. 6'' maximum. Designed to compensate for length changes due to temperature variations in exposed conduit runs. 6'' maximum. Zinc die cast. In a dry location, use to connect flexible metallic conduit (Greenfield or BX) to a steel outlet box or other metal enclosure.
Halex 26262 Concrete Tight Rain Tight Compression Connector Halex 04210 Squeeze Connector Carlon UB9FJ Large Radius Conduit Elbow
Concrete-tight and rain-tight. Use to connect two lengths of EMT conduit together in a wet location. Zinc die cast. In a dry location, use to connect flexible metallic conduit (Greenfield or BX) to steel outlet box, load center or other metal enclosure. Fits 1/2" knock outs. UL Approved. For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant. Manufactured to NEMA TC-2, Federal specification WC1O94A and UL 651 specifications. UL 651 Listed to the NEC by the ETL, UL Listed.
World Wide Sourcing 62100 Soap Dispenser Halex 16220B Multi-Piece Liquid Tight Conduit Connector Halex 05803B Snap-In Cable Connector
Use for soap and/or other liquids. Quick and easy refills. Installs in/under kitchen sink or counter. Multi-piece. Zinc die cast. Use to connect liquid-tight conduit to a steel outlet box or other metal enclosure or hub. UL Listed. Bulk packed. Zinc die cast. In a dry location, use to connect BX cable to a steel outlet box or other metal enclosure. 3/8" size fits 1/2" knock outs. UL Approved.
PlumbPak PP4801 Soap/Lotion Dispenser Halex 15803B Duplex Connector Carlon E945K-CAR Expansion Coupling
Fast, easy refill from top of dispenser. In a dry location, use to connect two pieces of flexible armored cable (Greenfield or BX) to a steel outlet box or other metal enclosure, when using only one knock-out opening. UL Approved. Designed to compensate for length changes due to temperature variations in exposed conduit runs. 6'' maximum.
PlumbPak PP4801W Soap/Lotion Dispenser Danco 10037 Soap Dispenser with 48 in Hose Carlon UA9FK-UPC Large Radius Conduit Elbow
Fast, easy refill from top of dispenser. Straight spout.  Long shank fits any counter top, For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant. Manufactured to NEMA TC-2, Federal specification WC1O94A and UL 651 specifications. UL 651 Listed to the NEC by the ETL, UL Listed.
Keeney K612VB Soap/Lotion Dispenser Halex 02207B Concrete Tight Compression Coupling Carlon E945L-CAR Expansion Coupling
Premium clear plastic reservoir bottle. Metal fill rod. Use to join two lengths of EMT conduit together. Zinc. UL, CSA Approved. Designed to compensate for length changes due to temperature variations in exposed conduit runs. 6'' maximum.