Home > PLUMBING > KITCHEN & BATH > FAUCETS > UTILITY FAUCETS
Sort By:
1
Halex 90510 Twin Screw Clamp Connector Halex 91530 Combination Coupling Halex 96510 2-Piece Butterfly Clamp Connector
Fits 1/2" knockout, non-metallic cable numbers 14/2, 12/2, 12/3 AWG or 2 number 14/2 AWG or flex cord .300 to .560 inches diameter. In a dry location, use to connect nonmetallic sheathed cable to a steel outlet box or other metal enclosure. UL, Listed, meets CSA requirements. Zinc die cast. Use to join EMT conduit to non-metallic sheathed cable. #14/2, #12/3 or 2 #14/2. Indoor use only. With UPC. UL Approved. Zinc die cast. In a dry location, use to secure #14 - #10 non-metallic sheathed cable to steel outlet box or other metal enclosure. No locknut required.
Halex 90512 Twin Screw Clamp Connector Halex 27511 Hit Lock Cable Connectors Halex 20511 Twin Screw Clamp Connector
Fits non metallic cable, such as Romex, number 14/2 round, number 12/3-8/3 AWG or flex cord .460 to .720 inches diameter. In a dry location, use to connect nonmetallic sheathed cable to a steel outlet box or other metal enclosure. UL Listed, meets CSA requirements. Fits NM Cable: #14/2, #14/3, #12/2, #10/2, #10/3. Snap-In, no screws or locknuts required. In a dry location, use to connect non-metallic sheathed cable to a steel outlet box or other metal enclosure. Design allows for two-step installation. Push into box and insert cable. UL Approved, CSA certified. Fits 1/2" knockout, non-metallic cable numbers 14/2, 12/2, 12/3 AWG or 2 number 14/2 AWG or flex cord .300 to .560 inches diameter. In a dry location, use to connect nonmetallic sheathed cable to a steel outlet box or other metal enclosure. UL, Listed, meets CSA requirements.
Halex 90513 Twin Screw Clamp Connector Halex 90514 Twin Screw Clamp Connector Halex 27519 Hit Lock Cable Connectors
Fits non metallic cable number 14/2 to number 6/3 AWG or number 3/10/3 AWG or flex cord .450 to .730 inches diameter. With a 1/2" knockout. In a dry location, use to connect nonmetallic sheathed cable to a steel outlet box or other metal enclosure. UL Listed, meets CSA requirements. Fits non metallic cable number 6/3 to number 2/3 AWG flex cord .800 to 1.350 inches diameter or SE cable 3 conductor or 3 number 1/0 minimum; 3 conductor or 3 number 2/0 maximum. With 1/2" knockout. In a dry location, use to connect nonmetallic sheathed cable to a steel outlet box or other metal enclosure. UL Listed, meets CSA requirements. Fits NM Cable: #14/2, #14/3, #12/2, #10/2, #10/3. Snap-In, no screws or locknuts required. In a dry location, use to connect non-metallic sheathed cable to a steel outlet box or other metal enclosure. Design allows for two-step installation. Push into box and insert cable. UL Approved, CSA certified.
Halex 05115 Twin Screw Clamp Connector Halex 27512 Hit Lock Cable Connectors Halex 26512 2-Piece Butterfly Clamp Connector
Fits non metallic cable, flex cords, multi flex cords; fitting range .834 - 1.520 inches diameter SE cables 2 conductor 4/0. With 1/2" knockout. In a dry location, use to connect nonmetallic sheathed cable to a steel outlet box or other metal enclosure. UL Listed, meets CSA requirements. Tray boxed. Fits NM Cable: #14/2, #14/3, #12/2, #10/2, #10/3. Snap-In, no screws or locknuts required. In a dry location, use to connect non-metallic sheathed cable to a steel outlet box or other metal enclosure. Design allows for two-step installation. Push into box and insert cable. UL Approved, CSA certified. Zinc die cast. In a dry location, use to secure #14 - #10 non-metallic sheathed cable to steel outlet box or other metal enclosure. No locknut required.
Halex 20510 Twin Screw Clamp Connector Halex 20512 Twin Screw Clamp Connector Halex 05120 Twin Screw Clamp Connector
Fits 1/2" knockout, non-metallic cable numbers 14/2, 12/2, 12/3 AWG or 2 number 14/2 AWG or flex cord .300 to .560 inches diameter. In a dry location, use to connect nonmetallic sheathed cable to a steel outlet box or other metal enclosure. UL, Listed, meets CSA requirements. Fits non metallic cable, such as Romex, number 14/2 round, number 12/3-8/3 AWG or flex cord .460 to .720 inches diameter. In a dry location, use to connect nonmetallic sheathed cable to a steel outlet box or other metal enclosure. UL Listed, meets CSA requirements. Fits non metallic cable, flex cords, multi flex cords fitting range 1.085 - 1.520 inches diameter. With 1/2" knockout. In a dry location, use to connect nonmetallic sheathed cable to a steel outlet box or other metal enclosure. UL Listed, meets CSA requirements. Tray boxed.
Southwire 55082415 Armored Cable Halex 75105B Hit Lock Cable Connectors Halex 27515 Cable Connectors
Wire whip, 14/3 AWG. Fits NM Cable: #14/2, #14/3, #12/2, #10/2, #10/3. Snap-In, no screws or locknuts required. In a dry location, use to connect non-metallic sheathed cable to a steel outlet box or other metal enclosure. Design allows for two-step installation. Push into box and insert cable. UL Approved, CSA certified. Push-in style with captive locking wedge. Rigid PVC. Superior strain relief and insulation. In a dry location, use to secure #14 - #10 non-metallic sheathed cable to steel outlet box or other metal enclosure. Fits NM cable #14/2 - #10/3. Fits 1/2" knock outs. UL, CSA Listed.
Armorlite 68580021 Type MC Armored Cable Armorlite 68579221 Type MC Armored Cable Duraclad 55278321 Type MC Armored Cable
Pre-installed conductors within an overall protective metallic interlocked armor. 45 percent lighter than steel MC cable. Cable reverse wound for ease of pulling and installation. Conductors - solid bare annealed copper per ASTM B-3, stranded copper stranding per ASTM B-8 for conductor. Conductor insulation rated 90 degree Celsius dry, 75 degrees Celsius wet at 600 volt. Conductor insulation is flame retardant, heat resistant PVC with flame, oil and gasoline resistant nylon jacket. General applications: branch, feeder, and service power distribution in commercial, industrial, institutional, and multi-residential construction/facilities, power, lighting, control, and signal circuits, concealed or exposed installations, installed in raceway/conduit, fished or embedded in plaster, installed in cable tray, and as aerial cable on a messenger. UL Classified 1, 2 and 3 hour through penetration firestop systems: W-L-3110, W-L-3113, W-L-31120, W-L-3121, C-A-J-3115, C-A-J-3140, C-A-J-3142, C-A-J-3202, C-A-J-4065, and C-A-J-4066. UL Listed. Pre-installed conductors within an overall protective metallic interlocked armor. 45 percent lighter than steel MC cable. Cable reverse wound for ease of pulling and installation. Conductors - solid bare annealed copper per ASTM B-3, stranded copper stranding per ASTM B-8 for conductor. Conductor insulation rated 90 degree Celsius dry, 75 degrees Celsius wet at 600 volt. Conductor insulation is flame retardant, heat resistant PVC with flame, oil and gasoline resistant nylon jacket. General applications: branch, feeder, and service power distribution in commercial, industrial, institutional, and multi-residential construction/facilities, power, lighting, control, and signal circuits, concealed or exposed installations, installed in raceway/conduit, fished or embedded in plaster, installed in cable tray, and as aerial cable on a messenger. UL Classified 1, 2 and 3 hour through penetration firestop systems: W-L-3110, W-L-3113, W-L-31120, W-L-3121, C-A-J-3115, C-A-J-3140, C-A-J-3142, C-A-J-3202, C-A-J-4065, and C-A-J-4066. UL Listed. Constructed with soft-drawn copper, type THHN insulated conductors which are individually wrapped with a moisture-resistant, flame-retardant paper covering. Interlocking steel armor is applied over the assembly. A 16 AWG aluminum bond wire is placed inside the armor, runs longitudinally and is in intimate contact with the armor for its entire length. General applications: Dry locations only, branch, feeder, and service power distribution in commercial, industrial, institutional, and multi-residential buildings, power, lighting, control and signal circuits, concealed or exposed installations, installed in cable tray and approved raceways, environmental air-handling spaces per NEC and under raised floors for information technology equipment conductors and cables per NEC 645.5(D) & 645.5(D)(2). 300.22(C), fished or embedded in plaster. Meets or exceeds the requirements of UL Standard 4 for Armored Cable, UL Standard 83, Federal Specification A-A59544 (formerly J-C-30B), and the National Electrical Code. Listed for use in UL 1, 2, and 3 hour through-penetration firestop systems.
Duraclad 55274921 Type MC Armored Cable Halex 05103B Twin Screw Clamp Connector Halex 05112B Twin Screw Clamp Connector
Constructed with soft-drawn copper, type THHN insulated conductors which are individually wrapped with a moisture-resistant, flame-retardant paper covering. Interlocking steel armor is applied over the assembly. A 16 AWG aluminum bond wire is placed inside the armor, runs longitudinally and is in intimate contact with the armor for its entire length. General applications: Dry locations only, branch, feeder, and service power distribution in commercial, industrial, institutional, and multi-residential buildings, power, lighting, control and signal circuits, concealed or exposed installations, installed in cable tray and approved raceways, environmental air-handling spaces per NEC and under raised floors for information technology equipment conductors and cables per NEC 645.5(D) & 645.5(D)(2). 300.22(C), fished or embedded in plaster. Meets or exceeds the requirements of UL Standard 4 for Armored Cable, UL Standard 83, Federal Specification A-A59544 (formerly J-C-30B), and the National Electrical Code. Listed for use in UL 1, 2, and 3 hour through-penetration firestop systems. Fits 1/2" knockout, non-metallic cable numbers 14/2, 12/2, 12/3 AWG or 2 number 14/2 AWG or flex cord .300 to .560 inches diameter. In a dry location, use to connect nonmetallic sheathed cable to a steel outlet box or other metal enclosure. UL, Listed, meets CSA requirements. Fits non metallic cable number 6/3 to number 2/3 AWG flex cord .800 to 1.350 inches diameter or SE cable 3 conductor or 3 number 1/0 minimum; 3 conductor or 3 number 2/0 maximum. With 1/2" knockout. In a dry location, use to connect nonmetallic sheathed cable to a steel outlet box or other metal enclosure. UL Listed, meets CSA requirements.
Mintcraft LB61 Lavatory Faucets Armorlite 68579222 Type MC Armored Cable Halex 05110B Twin Screw Clamp Connector
Replaceable seat, stem and index buttons. 1/2" IPS inlets. Chrome plated brass. Boxed. Pre-installed conductors within an overall protective metallic interlocked armor. 45 percent lighter than steel MC cable. Cable reverse wound for ease of pulling and installation. Conductors - solid bare annealed copper per ASTM B-3, stranded copper stranding per ASTM B-8 for conductor. Conductor insulation rated 90 degree Celsius dry, 75 degrees Celsius wet at 600 volt. Conductor insulation is flame retardant, heat resistant PVC with flame, oil and gasoline resistant nylon jacket. General applications: branch, feeder, and service power distribution in commercial, industrial, institutional, and multi-residential construction/facilities, power, lighting, control, and signal circuits, concealed or exposed installations, installed in raceway/conduit, fished or embedded in plaster, installed in cable tray, and as aerial cable on a messenger. UL Classified 1, 2 and 3 hour through penetration firestop systems: W-L-3110, W-L-3113, W-L-31120, W-L-3121, C-A-J-3115, C-A-J-3140, C-A-J-3142, C-A-J-3202, C-A-J-4065, and C-A-J-4066. UL Listed. Fits non metallic cable number 14/2 to number 6/3 AWG or number 3/10/3 AWG or flex cord .450 to .730 inches diameter. With a 1/2" knockout. In a dry location, use to connect nonmetallic sheathed cable to a steel outlet box or other metal enclosure. UL Listed, meets CSA requirements.
Armorlite 68583421 Type MC Armored Cable Halex 05107B Twin Screw Clamp Connector Duraclad 55274922 Type MC Armored Cable
Pre-installed conductors within an overall protective metallic interlocked armor. 45 percent lighter than steel MC cable. Cable reverse wound for ease of pulling and installation. Conductors - solid bare annealed copper per ASTM B-3, stranded copper stranding per ASTM B-8 for conductor. Conductor insulation rated 90 degree Celsius dry, 75 degrees Celsius wet at 600 volt. Conductor insulation is flame retardant, heat resistant PVC with flame, oil and gasoline resistant nylon jacket. General applications: branch, feeder, and service power distribution in commercial, industrial, institutional, and multi-residential construction/facilities, power, lighting, control, and signal circuits, concealed or exposed installations, installed in raceway/conduit, fished or embedded in plaster, installed in cable tray, and as aerial cable on a messenger. UL Classified 1, 2 and 3 hour through penetration firestop systems: W-L-3110, W-L-3113, W-L-31120, W-L-3121, C-A-J-3115, C-A-J-3140, C-A-J-3142, C-A-J-3202, C-A-J-4065, and C-A-J-4066. UL Listed. Fits non metallic cable, such as Romex, number 14/2 round, number 12/3-8/3 AWG or flex cord .460 to .720 inches diameter. In a dry location, use to connect nonmetallic sheathed cable to a steel outlet box or other metal enclosure. UL Listed, meets CSA requirements. Constructed with soft-drawn copper, type THHN insulated conductors which are individually wrapped with a moisture-resistant, flame-retardant paper covering. Interlocking steel armor is applied over the assembly. A 16 AWG aluminum bond wire is placed inside the armor, runs longitudinally and is in intimate contact with the armor for its entire length. General applications: Dry locations only, branch, feeder, and service power distribution in commercial, industrial, institutional, and multi-residential buildings, power, lighting, control and signal circuits, concealed or exposed installations, installed in cable tray and approved raceways, environmental air-handling spaces per NEC and under raised floors for information technology equipment conductors and cables per NEC 645.5(D) & 645.5(D)(2). 300.22(C), fished or embedded in plaster. Meets or exceeds the requirements of UL Standard 4 for Armored Cable, UL Standard 83, Federal Specification A-A59544 (formerly J-C-30B), and the National Electrical Code. Listed for use in UL 1, 2, and 3 hour through-penetration firestop systems.
Duraclad 55278521 Type MC Armored Cable Duraclad 55275021 Type MC Armored Cable Armolite 68580022 Solid Metal Clad Cable
Constructed with soft-drawn copper, type THHN insulated conductors which are individually wrapped with a moisture-resistant, flame-retardant paper covering. Interlocking steel armor is applied over the assembly. A 16 AWG aluminum bond wire is placed inside the armor, runs longitudinally and is in intimate contact with the armor for its entire length. General applications: Dry locations only, branch, feeder, and service power distribution in commercial, industrial, institutional, and multi-residential buildings, power, lighting, control and signal circuits, concealed or exposed installations, installed in cable tray and approved raceways, environmental air-handling spaces per NEC and under raised floors for information technology equipment conductors and cables per NEC 645.5(D) & 645.5(D)(2). 300.22(C), fished or embedded in plaster. Meets or exceeds the requirements of UL Standard 4 for Armored Cable, UL Standard 83, Federal Specification A-A59544 (formerly J-C-30B), and the National Electrical Code. Listed for use in UL 1, 2, and 3 hour through-penetration firestop systems. Constructed with soft-drawn copper, type THHN insulated conductors which are individually wrapped with a moisture-resistant, flame-retardant paper covering. Interlocking steel armor is applied over the assembly. A 16 AWG aluminum bond wire is placed inside the armor, runs longitudinally and is in intimate contact with the armor for its entire length. General applications: Dry locations only, branch, feeder, and service power distribution in commercial, industrial, institutional, and multi-residential buildings, power, lighting, control and signal circuits, concealed or exposed installations, installed in cable tray and approved raceways, environmental air-handling spaces per NEC and under raised floors for information technology equipment conductors and cables per NEC 645.5(D) & 645.5(D)(2). 300.22(C), fished or embedded in plaster. Meets or exceeds the requirements of UL Standard 4 for Armored Cable, UL Standard 83, Federal Specification A-A59544 (formerly J-C-30B), and the National Electrical Code. Listed for use in UL 1, 2, and 3 hour through-penetration firestop systems. Pre-installed conductors within an overall protective metallic interlocked armor. 45 percent lighter than steel MC cable. Cable reverse wound for ease of pulling and installation. Conductors - solid bare annealed copper per ASTM B-3, stranded copper stranding per ASTM B-8 for conductor. Conductor insulation rated 90 degree Celsius dry, 75 degrees Celsius wet at 600 volt. Conductor insulation is flame retardant, heat resistant PVC with flame, oil and gasoline resistant nylon jacket. General applications: branch, feeder, and service power distribution in commercial, industrial, institutional, and multi-residential construction/facilities, power, lighting, control, and signal circuits, concealed or exposed installations, installed in raceway/conduit, fished or embedded in plaster, installed in cable tray, and as aerial cable on a messenger. UL Classified 1, 2 and 3 hour through penetration firestop systems: W-L-3110, W-L-3113, W-L-31120, W-L-3121, C-A-J-3115, C-A-J-3140, C-A-J-3142, C-A-J-3202, C-A-J-4065, and C-A-J-4066. UL Listed.
Halex 05703B Combination Clamp Connector Duraclad 55278322 Type MC Armored Cable Armolite 68583422 Solid Metal Clad Cable
Zinc die cast. In a dry location, use to connect flexible metallic conduit (Greenfield, BX, NM or Metal Clad) to a steel outlet box or other metal enclosure. 3/8" size fits 1/2" knock outs. UL Approved. Constructed with soft-drawn copper, type THHN insulated conductors which are individually wrapped with a moisture-resistant, flame-retardant paper covering. Interlocking steel armor is applied over the assembly. A 16 AWG aluminum bond wire is placed inside the armor, runs longitudinally and is in intimate contact with the armor for its entire length. General applications: Dry locations only, branch, feeder, and service power distribution in commercial, industrial, institutional, and multi-residential buildings, power, lighting, control and signal circuits, concealed or exposed installations, installed in cable tray and approved raceways, environmental air-handling spaces per NEC and under raised floors for information technology equipment conductors and cables per NEC 645.5(D) & 645.5(D)(2). 300.22(C), fished or embedded in plaster. Meets or exceeds the requirements of UL Standard 4 for Armored Cable, UL Standard 83, Federal Specification A-A59544 (formerly J-C-30B), and the National Electrical Code. Listed for use in UL 1, 2, and 3 hour through-penetration firestop systems. Pre-installed conductors within an overall protective metallic interlocked armor. 45 percent lighter than steel MC cable. Cable reverse wound for ease of pulling and installation. Conductors - solid bare annealed copper per ASTM B-3, stranded copper stranding per ASTM B-8 for conductor. Conductor insulation rated 90 degree Celsius dry, 75 degrees Celsius wet at 600 volt. Conductor insulation is flame retardant, heat resistant PVC with flame, oil and gasoline resistant nylon jacket. General applications: branch, feeder, and service power distribution in commercial, industrial, institutional, and multi-residential construction/facilities, power, lighting, control, and signal circuits, concealed or exposed installations, installed in raceway/conduit, fished or embedded in plaster, installed in cable tray, and as aerial cable on a messenger. UL Classified 1, 2 and 3 hour through penetration firestop systems: W-L-3110, W-L-3113, W-L-31120, W-L-3121, C-A-J-3115, C-A-J-3140, C-A-J-3142, C-A-J-3202, C-A-J-4065, and C-A-J-4066. UL Listed.
Armolite 68580023 Solid Metal Clad Cable Duraclad 55278323 Type MC Armored Cable Duraclad 55274923 Type MC Armored Cable
Pre-installed conductors within an overall protective metallic interlocked armor. 45 percent lighter than steel MC cable. Cable reverse wound for ease of pulling and installation. Conductors - solid bare annealed copper per ASTM B-3, stranded copper stranding per ASTM B-8 for conductor. Conductor insulation rated 90 degree Celsius dry, 75 degrees Celsius wet at 600 volt. Conductor insulation is flame retardant, heat resistant PVC with flame, oil and gasoline resistant nylon jacket. General applications: branch, feeder, and service power distribution in commercial, industrial, institutional, and multi-residential construction/facilities, power, lighting, control, and signal circuits, concealed or exposed installations, installed in raceway/conduit, fished or embedded in plaster, installed in cable tray, and as aerial cable on a messenger. UL Classified 1, 2 and 3 hour through penetration firestop systems: W-L-3110, W-L-3113, W-L-31120, W-L-3121, C-A-J-3115, C-A-J-3140, C-A-J-3142, C-A-J-3202, C-A-J-4065, and C-A-J-4066. UL Listed. Constructed with soft-drawn copper, type THHN insulated conductors which are individually wrapped with a moisture-resistant, flame-retardant paper covering. Interlocking steel armor is applied over the assembly. A 16 AWG aluminum bond wire is placed inside the armor, runs longitudinally and is in intimate contact with the armor for its entire length. General applications: Dry locations only, branch, feeder, and service power distribution in commercial, industrial, institutional, and multi-residential buildings, power, lighting, control and signal circuits, concealed or exposed installations, installed in cable tray and approved raceways, environmental air-handling spaces per NEC and under raised floors for information technology equipment conductors and cables per NEC 645.5(D) & 645.5(D)(2). 300.22(C), fished or embedded in plaster. Meets or exceeds the requirements of UL Standard 4 for Armored Cable, UL Standard 83, Federal Specification A-A59544 (formerly J-C-30B), and the National Electrical Code. Listed for use in UL 1, 2, and 3 hour through-penetration firestop systems. Constructed with soft-drawn copper, type THHN insulated conductors which are individually wrapped with a moisture-resistant, flame-retardant paper covering. Interlocking steel armor is applied over the assembly. A 16 AWG aluminum bond wire is placed inside the armor, runs longitudinally and is in intimate contact with the armor for its entire length. General applications: Dry locations only, branch, feeder, and service power distribution in commercial, industrial, institutional, and multi-residential buildings, power, lighting, control and signal circuits, concealed or exposed installations, installed in cable tray and approved raceways, environmental air-handling spaces per NEC and under raised floors for information technology equipment conductors and cables per NEC 645.5(D) & 645.5(D)(2). 300.22(C), fished or embedded in plaster. Meets or exceeds the requirements of UL Standard 4 for Armored Cable, UL Standard 83, Federal Specification A-A59544 (formerly J-C-30B), and the National Electrical Code. Listed for use in UL 1, 2, and 3 hour through-penetration firestop systems.
Sunco Randolph VS1816RT Double Door Bathroom Vanity Sunco Randolph VS1816YT Double Door Bathroom Vanity Armolite 68583423 Solid Metal Clad Cable
Cam-Lock joinery system for easy assembly. All wood box construction on all plywood box. Brushed nickel knobs included. 1/2" framed back panel. Natural maple interior cabinet finish. Raised panel door, 1/2" traditional overlay. Cam-Lock joinery system for easy assembly. All wood box construction with white finish on all plywood box. Brushed nickel knobs included. 1/2" framed back panel. White interior cabinet finish. Raised panel door, 1/2" traditional overlay, Pre-installed conductors within an overall protective metallic interlocked armor. 45 percent lighter than steel MC cable. Cable reverse wound for ease of pulling and installation. Conductors - solid bare annealed copper per ASTM B-3, stranded copper stranding per ASTM B-8 for conductor. Conductor insulation rated 90 degree Celsius dry, 75 degrees Celsius wet at 600 volt. Conductor insulation is flame retardant, heat resistant PVC with flame, oil and gasoline resistant nylon jacket. General applications: branch, feeder, and service power distribution in commercial, industrial, institutional, and multi-residential construction/facilities, power, lighting, control, and signal circuits, concealed or exposed installations, installed in raceway/conduit, fished or embedded in plaster, installed in cable tray, and as aerial cable on a messenger. UL Classified 1, 2 and 3 hour through penetration firestop systems: W-L-3110, W-L-3113, W-L-31120, W-L-3121, C-A-J-3115, C-A-J-3140, C-A-J-3142, C-A-J-3202, C-A-J-4065, and C-A-J-4066. UL Listed.
Foremost Heartland HEO1816 Traditional Bathroom Vanity Foremost Heartland HEW1816 Traditional Bathroom Vanity Duraclad 55278301 Type MC Armored Cable
BATHROOM VANITY OAK 18X16
Our Price: $96.64
Genuine oak finish. Strong, durable plywood box construction. Traditional decorative arch doors. Rigid face frame construction. Full overlay doors and apron. Brass knobs. Easy to clean,  solid white cultured marble top with overflow and soap dish. Pre-drilled 4" center accommodates most faucets. No-drip countertop edge prevents water run-off. Premium white finish. Strong, durable plywood box construction. Traditional decorative arch doors. Rigid face frame construction. Full overlay doors and apron. Brass knobs. Easy to clean, solid white cultured marble top with overflow and soap dish. Pre-drilled 4" center accommodates most faucets. No-drip countertop edge prevents water run-off. Constructed with soft-drawn copper, type THHN insulated conductors which are individually wrapped with a moisture-resistant, flame-retardant paper covering. Interlocking steel armor is applied over the assembly. A 16 AWG aluminum bond wire is placed inside the armor, runs longitudinally and is in intimate contact with the armor for its entire length. General applications: Dry locations only, branch, feeder, and service power distribution in commercial, industrial, institutional, and multi-residential buildings, power, lighting, control and signal circuits, concealed or exposed installations, installed in cable tray and approved raceways, environmental air-handling spaces per NEC and under raised floors for information technology equipment conductors and cables per NEC 645.5(D) & 645.5(D)(2). 300.22(C), fished or embedded in plaster. Meets or exceeds the requirements of UL Standard 4 for Armored Cable, UL Standard 83, Federal Specification A-A59544 (formerly J-C-30B), and the National Electrical Code. Listed for use in UL 1, 2, and 3 hour through-penetration firestop systems.
Duraclad 55274901 Type MC Armored Cable Armorlite 68580001 Type MC Armored Cable Sunco Randolph VS2418RT Double Door Bathroom Vanity
Constructed with soft-drawn copper, type THHN insulated conductors which are individually wrapped with a moisture-resistant, flame-retardant paper covering. Interlocking steel armor is applied over the assembly. A 16 AWG aluminum bond wire is placed inside the armor, runs longitudinally and is in intimate contact with the armor for its entire length. General applications: Dry locations only, branch, feeder, and service power distribution in commercial, industrial, institutional, and multi-residential buildings, power, lighting, control and signal circuits, concealed or exposed installations, installed in cable tray and approved raceways, environmental air-handling spaces per NEC and under raised floors for information technology equipment conductors and cables per NEC 645.5(D) & 645.5(D)(2). 300.22(C), fished or embedded in plaster. Meets or exceeds the requirements of UL Standard 4 for Armored Cable, UL Standard 83, Federal Specification A-A59544 (formerly J-C-30B), and the National Electrical Code. Listed for use in UL 1, 2, and 3 hour through-penetration firestop systems. Constructed with soft-drawn copper, type THHN insulated conductors which are individually wrapped with a moisture-resistant, flame-retardant paper covering. Interlocking steel armor is applied over the assembly. A 16 AWG aluminum bond wire is placed inside the armor, runs longitudinally and is in intimate contact with the armor for its entire length. General applications: Dry locations only, branch, feeder, and service power distribution in commercial, industrial, institutional, and multi-residential buildings, power, lighting, control and signal circuits, concealed or exposed installations, installed in cable tray and approved raceways, environmental air-handling spaces per NEC and under raised floors for information technology equipment conductors and cables per NEC 645.5(D) & 645.5(D)(2). 300.22(C), fished or embedded in plaster. Meets or exceeds the requirements of UL Standard 4 for Armored Cable, UL Standard 83, Federal Specification A-A59544 (formerly J-C-30B), and the National Electrical Code. Listed for use in UL 1, 2, and 3 hour through-penetration firestop systems. Cam-Lock joinery system for easy assembly. All wood box construction on all plywood box. Brushed nickel knobs included. 1/2" framed back panel. Natural maple interior cabinet finish. Raised panel door, 1/2" traditional overlay.
Sunco Randolph VS2418YT Double Door Bathroom Vanity Coleman 600006621 SPT-1 Lamp Cord Coleman 600006619 SPT-1 Lamp Cord
Cam-Lock joinery system for easy assembly. All wood box construction with white finish on all plywood box. Brushed nickel knobs included. 1/2" framed back panel. White interior cabinet finish. Raised panel door, 1/2" traditional overlay, Thermoplastic PVC jacket, not for hard usage in accordance with NEC. Used for lamps, small appliances and radios. Soft annealed stranded copper per ASTM B3-90 conductor. 300 volt maximum. PVC insulation and UL62, UL1581 Listed. Spool. Thermoplastic PVC jacket, not for hard usage in accordance with NEC. Used for lamps, small appliances and radios. Soft annealed stranded copper per ASTM B3-90 conductor. 300 volt maximum. PVC insulation and UL62, UL1581 Listed. Spool.
Coleman 600006607 SPT-1 Lamp Cord Coleman 600006608 SPT-1 Lamp Cord Coleman 600006618 SPT-1 Lamp Cord
Thermoplastic PVC jacket, not for hard usage in accordance with NEC. Used for lamps, small appliances and radios. Soft annealed stranded copper per ASTM B3-90 conductor. 300 volt maximum. PVC insulation and UL62, UL1581 Listed. Spool. Thermoplastic PVC jacket, not for hard usage in accordance with NEC. Used for lamps, small appliances and radios. Soft annealed stranded copper per ASTM B3-90 conductor. 300 volt maximum. PVC insulation and UL62, UL1581 Listed. Spool. Thermoplastic PVC jacket, not for hard usage in accordance with NEC. Used for lamps, small appliances and radios. Soft annealed stranded copper per ASTM B3-90 conductor. 300 volt maximum. PVC insulation and UL62, UL1581 Listed. Spool.
Coleman 600006601 SPT-1 Lamp Cord Foremost Heartland HEW2418 Traditional Bathroom Vanity Foremost Heartland HEO2418 Traditional Bathroom Vanity
Thermoplastic PVC jacket, not for hard usage in accordance with NEC. Used for lamps, small appliances and radios. Soft annealed stranded copper per ASTM B3-90 conductor. 300 volt maximum. PVC insulation and UL62, UL1581 Listed. Spool. Premium white finish. Strong, durable plywood box construction. Traditional decorative arch doors. Rigid face frame construction. Full overlay doors and apron. Brass knobs. Easy to clean, solid white cultured marble top with overflow and soap dish. Pre-drilled 4" center accommodates most faucets. No-drip countertop edge prevents water run-off. Genuine oak finish. Strong, durable plywood box construction. Traditional decorative arch doors. Rigid face frame construction. Full overlay doors and apron. Brass knobs. Easy to clean,  solid white cultured marble top with overflow and soap dish. Pre-drilled 4" center accommodates most faucets. No-drip countertop edge prevents water run-off.
Sunco Randolph VS3018RT Double Door Bathroom Vanity Sunco Randolph VS3018YT Double Door Bathroom Vanity Foremost Columbia COEAT2418 Bathroom Vanity
Cam-Lock joinery system for easy assembly. All wood box construction on all plywood box. Brushed nickel knobs included. 1/2" framed back panel. Natural maple interior cabinet finish. Raised panel door, 1/2" traditional overlay. Cam-Lock joinery system for easy assembly. All wood box construction with white finish on all plywood box. Brushed nickel knobs included. 1/2" framed back panel. White interior cabinet finish. Raised panel door, 1/2" traditional overlay, 24"w x 18"d x 32"h. 4" faucet center drillings,cultured solid white cultured marble top included. 2 door.
Foremost Columbia COWAT2418 Bathroom Vanity Sunco Randolph VS3021YT Double Door Bathroom Vanity Sunco Randolph VS3021RT Double Door Bathroom Vanity
24"w x 18"d x 32"h. 4" faucet center drillings,cultured solid white cultured marble top included. 2 door. Cam-Lock joinery system for easy assembly. All wood box construction with white finish on all plywood box. Brushed nickel knobs included. 1/2" framed back panel. White interior cabinet finish. Raised panel door, 1/2" traditional overlay, Cam-Lock joinery system for easy assembly. All wood box construction on all plywood box. Brushed nickel knobs included. 1/2" framed back panel. Natural maple interior cabinet finish. Raised panel door, 1/2" traditional overlay.
Foremost Columbia COCAT2418 Bathroom Vanity Coleman 601266607 SPT-2 Lamp Cord Coleman 601266608 SPT-2 Lamp Cord
24"w x 18"d x 32"h. 4" faucet center drillings,cultured solid white cultured marble top included. 2 door. Thermoplastic PVC jacket, not for hard usage in accordance with NEC. Used for lamps, small appliances and radios. Soft annealed stranded copper per ASTM B3-90 conductor. 300 volt maximum. PVC insulation and UL62, UL1581 Listed. Spool. Thermoplastic PVC jacket, not for hard usage in accordance with NEC. Used for lamps, small appliances and radios. Soft annealed stranded copper per ASTM B3-90 conductor. 300 volt maximum. PVC insulation and UL62, UL1581 Listed. Spool.
Coleman 601266601 SPT-2 Lamp Cord Sunco Randolph VDR3018RRT Single Door Bathroom Vanity Sunco Randolph VDR3018RYT Single Door Bathroom Vanity
Thermoplastic PVC jacket, not for hard usage in accordance with NEC. Used for lamps, small appliances and radios. Soft annealed stranded copper per ASTM B3-90 conductor. 300 volt maximum. PVC insulation and UL62, UL1581 Listed. Spool. Cam-Lock joinery system for easy assembly. All wood box construction with real wood veneer finish on all plywood box. Brushed nickel knobs included. 1/2" framed back panel. Natural maple interior cabinet finish. Raised panel door, 1/2" traditional overlay, Cam-Lock joinery system for easy assembly. All wood box construction with white veneer finish on all plywood box. Brushed nickel knobs included. 1/2" framed back panel. White interior cabinet finish. Raised panel door, 1/2" traditional overlay.
Foremost Heartland HEW2418-PP Traditional Bathroom Vanity Foremost Heartland Pro Pack Traditional Bathroom Vanity Foremost Heartland HEO3018 Traditional Bathroom Vanity
BATHROOM VANITY OAK 24X18
Our Price: $159.51
Premium white finish. Strong, durable plywood box construction. Traditional decorative arch doors. Rigid face frame construction. Full overlay doors and apron. Brass knobs. Easy to clean, solid white cultured marble top with overflow and soap dish. No-drip countertop edge prevents water run-off. Includes FT-1010 washerless two handle chrome faucet with pop-up and VK-101-SS flexible supply lines. Genuine oak finish. Strong, durable plywood box construction. Traditional decorative arch doors. Rigid face frame construction. Full overlay doors and apron. Brass knobs. Easy to clean, solid white cultured marble top with overflow and soap dish. No-drip countertop edge prevents water run-off. Includes FT-1010 washerless two handle chrome faucet with pop-up and VK-101-SS flexible supply lines. Genuine oak finish. Strong, durable plywood box construction. Traditional decorative arch doors. Rigid face frame construction. Full overlay doors and apron. Brass knobs. Easy to clean,  solid white cultured marble top with overflow and soap dish. Pre-drilled 4" center accommodates most faucets. No-drip countertop edge prevents water run-off.
Foremost Heartland HEW3018 Traditional Bathroom Vanity Sunco Randolph VDR3021RRT Single Door Bathroom Vanity Sunco Randolph VDR3021RYT Single Door Bathroom Vanity
Premium white finish. Strong, durable plywood box construction. Traditional decorative arch doors. Rigid face frame construction. Full overlay doors and apron. Brass knobs. Easy to clean, solid white cultured marble top with overflow and soap dish. Pre-drilled 4" center accommodates most faucets. No-drip countertop edge prevents water run-off. Cam-Lock joinery system for easy assembly. All wood box construction with real wood veneer finish on all plywood box. Brushed nickel knobs included. 1/2" framed back panel. Natural maple interior cabinet finish. Raised panel door, 1/2" traditional overlay, Cam-Lock joinery system for easy assembly. All wood box construction with white veneer finish on all plywood box. Brushed nickel knobs included. 1/2" framed back panel. White interior cabinet finish. Raised panel door, 1/2" traditional overlay.
Armorlite 68583401 Type MC Armored Cable Sunco Randolph VDR3618RRT Double Door Bathroom Vanity Sunco Randolph VDR3618RYT Double Door Bathroom Vanity
Pre-installed conductors within an overall protective metallic interlocked armor. 45 percent lighter than steel MC cable. Cable reverse wound for ease of pulling and installation. Conductors - solid bare annealed copper per ASTM B-3, stranded copper stranding per ASTM B-8 for conductor. Conductor insulation rated 90 degree Celsius dry, 75 degrees Celsius wet at 600 volt. Conductor insulation is flame retardant, heat resistant PVC with flame, oil and gasoline resistant nylon jacket. General applications: branch, feeder, and service power distribution in commercial, industrial, institutional, and multi-residential construction/facilities, power, lighting, control, and signal circuits, concealed or exposed installations, installed in raceway/conduit, fished or embedded in plaster, installed in cable tray, and as aerial cable on a messenger. UL Classified 1, 2 and 3 hour through penetration firestop systems: W-L-3110, W-L-3113, W-L-31120, W-L-3121, C-A-J-3115, C-A-J-3140, C-A-J-3142, C-A-J-3202, C-A-J-4065, and C-A-J-4066. UL Listed. Cam-Lock joinery system for easy assembly. All wood box construction with real wood veneer finish on all plywood box. Brushed nickel knobs included. 1/2" framed back panel. Natural maple interior cabinet finish. Raised panel door, 1/2" traditional overlay, Cam-Lock joinery system for easy assembly. All wood box construction with white veneer finish on all plywood box. Brushed nickel knobs included. 1/2" framed back panel. White interior cabinet finish. Raised panel door, 1/2" traditional overlay.
VANITY 30X21 1DR/2DRAWER WHITE VANITY 30X21 1DR/2DRAWER OAK  Sunco Randolph VDR3621RRT Double Door Bathroom Vanity
Transitional style. 34" tall, chrome exterior hardware 21.625" D.TOP NOT INCLUDED Transitional style. 34" tall, chrome exterior hardware 21.625" D.TOP NOT INCLUDED Cam-Lock joinery system for easy assembly. All wood box construction with real wood veneer finish on all plywood box. Brushed nickel knobs included. 1/2" framed back panel. Natural maple interior cabinet finish. Raised panel door, 1/2" traditional overlay,
Sunco Randolph VDR3621RYT Double Door Bathroom Vanity Foremost Columbia COEAT3018 Bathroom Vanity Foremost Columbia COWA2135 Bathroom Vanity
Cam-Lock joinery system for easy assembly. All wood box construction with white veneer finish on all plywood box. Brushed nickel knobs included. 1/2" framed back panel. White interior cabinet finish. Raised panel door, 1/2" traditional overlay. Espresso finish, 4" faucet center drillings, brushed nickel hardware. 1/2" plywood box construction, 2 door. 30"w X 18" d X 32" h. 3-hole 4" centerset. Solid white cultured marble top included. 4" faucet center drillings, white vitreous china top included. Euro-styling, 2 door. 22-1/4"W x 17-1/2"Dx36-1/2"H
Foremost Columbia COEA2135 Bathroom Vanity Foremost Columbia COCA2135 Bathroom Vanity VANITY 36X21 2DR/2DRAWER WHITE
22-1/4"W x 17-1/2"Dx36-1/2"H faucet center drillings, brushed nickel hardware, white vitreous china top. 1/2" plywood box construction, 2 door. 4" faucet center drillings, white vitreous china top included. Euro-styling, 2 door. 22-1/4"W x 17-1/2"Dx36-1/2"H Transitional style. 34" tall, chrome exterior hardware 21.625" D.TOP NOT INCLUDED
VANITY 36X21 2DR/2DRAWER OAK  Sunco Randolph VDR4821/4RT Double Door Bathroom Vanity Sunco Randolph VDR4821/4YT Double Door Bathroom Vanity
Transitional style. 34" tall, chrome exterior hardware 21.625" D.TOP NOT INCLUDED Cam-Lock joinery system for easy assembly. All wood box construction with real wood veneer finish on all plywood box. Brushed nickel knobs included. 1/2" framed back panel. Natural maple interior cabinet finish. Raised panel door, 1/2" traditional overlay, Cam-Lock joinery system for easy assembly. All wood box construction with white veneer finish on all plywood box. Brushed nickel knobs included. 1/2" framed back panel. White interior cabinet finish. Raised panel door, 1/2" traditional overlay.
VANITY COMBO GREY CORSICANA   VANITY 34X48 2DR/4DRAWER WHITE VANITY 48X21 2DR/4DRAWER OAK
Traditional vanity with 2 raised panel doors and 1 interior adjustable shelf. Antique Black oval knobs. White vitreous china European basin, pre-drilled for a 4" faucet. Vanity arrives pre-assembled, except for knobs. Vanity and sink are packed together but not pre-attached (some assembly required. Our wood products are compliant with California Air Resource Board (CARB) standards, the highest health-based air quality standards in the industry. Faucet and accessories not included. Transitional style. 34" tall, chrome exterior hardware 21.625" D.TOP NOT INCLUDED Transitional style. 34" tall, chrome exterior hardware 21.625" D.TOP NOT INCLUDED
Foremost Palermo PAEA2534 Bathroom Vanity Foremost Berkshire BECA2421D Bathroom Vanity Foremost Berkshire BECA3021D Bathroom Vanity
Vitreous china, euro-style sink top. Inset wood doors. Antique brass hardware. Shaker vanity. Features unique divided bottom drawer with quality construction and premium finish. Oil rubbed knobs, 2 doors. Shaker vanity. Solid construction. Lower drawer is a convenient addition that is capable of fully extending. Durable oil-rubbed knobs. 2 doors/1 divided drawer.
Foremost Hawthorne HANA3021D Bathroom Vanity Foremost Berkshire BECA3621D Bathroom Vanity Foremost Hawthorne HANA3621D Traditional Bathroom Vanity
Dark walnut finish, 1 door, 2 full extension solid wood drawers, antique brass knobs. Assembled, vanity top and faucet not included. 30"w x 21-3/4"d x 34"h. Shaker vanity. Features decorative oil-rubbed knobs and ample storage space. 2 doors/2 drawer. Dark walnut finish, 2 door, 2 full extension solid wood drawers, antique brass knobs. Assembled, vanity top and faucet not included. 36"w x 21-3/4"d x 34"h.
Foremost Wingate WIA3021 Bathroom Vanity Foremost Berkshire BECA4821D Bathroom Vanity Foremost Hawthorne HANA4821D Traditional Bathroom Vanity
Fully assembled cherry vanity with china top, 1 door, 1 adjustable inner shelf, vitreous china top with 8" faucet drilling included. Antiqued Drop Pulls Espresso finish, Shaker style, 4 doors, 2 lower solid wood dovetail drawers, oil rubbed knobs, raised from the floor by four wood legs, comfortable vanity height of 34", assembled. Vanity top and faucet not included. 48"w x 21-3/4"d x 34"h. Dark walnut finish, 2 door, 6 full extension solid wood drawers, antique brass knobs. Assembled, vanity top and faucet not included. 48"w x 21-3/4"d x 34"h.
Foremost Bellani BLWVT3021 Transitional Bathroom Vanity
Vanity is pre-assembled with top and sink pre-attached. 30" vanity with 2 doors, 4" backsplash, constructed from solid wood, natural wood veneers and low-emission engineered wood, rounded front design. 30"w x 21-5/8"d x 33"h.
   
 
1