Home > PLUMBING > KITCHEN & BATH > BATHROOM HARDWARE > MISC BATH HARDWARE
Sort By:
1
Halex 96560 Beam Clamp Gardner Bender GSE-15310 Service Entrance Staple Gardner Bender MS-1550T Cable Staple
Use to secure conduit to a metal beam. Clamps on beam, girder or similar structure to provide a mounting base for attachment of a conduit hanger, either directly or by means of a threaded rod. Eliminates need to drill hole through beam. Secures service entrance cable. Pointed offset legs drive in straight, will not split wood. High quality carbon steel for durability and easy nailing. Two-wire staples fasten 2 and 3 conductor non-metallic cable. SIZE: 1/2" x 1" - For 2 conductor (No. 12 and No. 14) NM cable. SIZE: 9/16" x 1-1/4" - For 3 conductor (No. 10 and No. 12) NM, BX, UF and other cable.
Thomas And Betts Z703 1/2-25 Superstrut Gardner Bender MS Cable Staple Superstrut 200 Series Angle Bracket Fitting
Pipe straps hold conduit and pipes in channel. They are inserted along the slot side of the channel and twisted into place. Pre-assembled with locking slot / hex head bolt. Gold-galvanized corrosion free finish. Two-wire staples fasten 2 and 3 conductor non-metallic cable. SIZE: 1/2" x 1" - For 2 conductor (No. 12 and No. 14) NM cable. SIZE: 9/16" x 1-1/4" - For 3 conductor (No. 10 and No. 12) NM, BX, UF and other cable. For use in metal framing applications. Manufactured from hot rolled carbon steel.
Thomas And Betts Z703 3/4-25 Superstrut Gardner Bender MS-1575T Cable Staple Gardner Bender MSI-1525T Insulated Cable Staple
Pipe straps hold conduit and pipes in channel. They are inserted along the slot side of the channel and twisted into place. Pre-assembled with locking slot / hex head bolt. Gold-galvanized corrosion free finish. Two-wire staples fasten 2 and 3 conductor non-metallic cable. SIZE: 1/2" x 1" - For 2 conductor (No. 12 and No. 14) NM cable. SIZE: 9/16" x 1-1/4" - For 3 conductor (No. 10 and No. 12) NM, BX, UF and other cable. Use on NM, BX, UF and other electrical cables. Made from high carbon steel. Cable protected by polyethylene insulation.
Gardner Bender PSG Low Voltage Cable Staple Thomas And Betts Z703 1 1/4-10 Superstrut Gardner Bender MSI-50B Insulated Cable Staple
For metallic and non-metallic cording and cable. Constructed of high-grade injection molded polyethylene cradles and zinc-plated nails. Provides toughness, high dielectric strength and longevity. Smooth saddles hold wire securely while preventing damage. Pipe straps hold conduit and pipes in channel. They are inserted along the slot side of the channel and twisted into place. Pre-assembled with locking slot / hex head bolt. Gold-galvanized corrosion free finish. Use on NM, BX, UF and other electrical cables. Made from high carbon steel. Cable protected by polyethylene insulation.
Superstrut 200 Flat Straight Bracket Splice Plate 7-1/4 in L Gardner Bender PWS Low Voltage Kwik Mount Cable Staple Gardner Bender PSB Cable Staple
Splices and supports conduit. Quick fastening and guiding of wires. Wires easily snap in or out of two usable sides. Use to secure Christmas light sets, sound system wires, etc. Holds category 5 cable for datacom. For securing speaker, telephone, bell and other low-volt wire. Polyethylene saddle won't rust, rot or deteriorate. Zinc-plated nail resists rust and corrosion. 1 nail per staple. Dives in with a hammer. UL Listed.
Gardner Bender MS-1555 Cable Staple Gardner Bender GSE-15410 Service Entrance Staple Gardner Bender GSE-402 Service Entrance Strap
Two-wire staples fasten 2 and 3 conductor non-metallic cable. SIZE: 1/2" x 1" - For 2 conductor (No. 12 and No. 14) NM cable. SIZE: 9/16" x 1-1/4" - For 3 conductor (No. 10 and No. 12) NM, BX, UF and other cable. Secures service entrance cable. Pointed offset legs drive in straight, will not split wood. High quality carbon steel for durability and easy nailing. Plastic insulated straps secure service entrance cable. Electro-zinc plated nails. Cradles constructed of polyethylene. Straps stabilized against UV rays and extreme cold, withstands deterioration and breakage.
Gardner Bender MS Cable Staple Gardner Bender GSE-205 Service Entrance Strap Thomas And Betts Z703 1-25
Two-wire staples fasten 2 and 3 conductor non-metallic cable. SIZE: 1/2" x 1" - For 2 conductor (No. 12 and No. 14) NM cable. SIZE: 9/16" x 1-1/4" - For 3 conductor (No. 10 and No. 12) NM, BX, UF and other cable. Plastic insulated straps secure service entrance cable. Electro-zinc plated nails. Cradles constructed of polyethylene. Straps stabilized against UV rays and extreme cold, withstands deterioration and breakage. Pipe straps hold conduit and pipes in channel. They are inserted along the slot side of the channel and twisted into place. Pre-assembled with locking slot / hex head bolt. Gold-galvanized corrosion free finish.
STAPLE METAL INSULATED 1/2IN  Thomas And Betts Z702 21/2EG-10 Superstrut Pipe Clamp Gardner Bender MSB Insulated Low Voltage Cable Staple
Metal insulated staples secures and protects non-metallic (NM), BX, MC, AC and UF cable. Insulator made from durable polyethylene. Plastic insulator protects cables and helps prevent arc faults. Dimensions: 1/2"W x 1-1/2"L. Silver/red color. Pipe straps hold conduit and pipes in channel. They are inserted along the slot side of the channel and twisted into place. Pre-assembled with locking slot / hex head bolt. U-shaped staple fastens audio speaker and bell wire, insulated cradle protects wire.
Gardner Bender MSW Insulated Cable Staple Gardner Bender GSE-304 Service Entrance Strap Gardner Bender PS-50 Insulated Cable Staple
U-shaped staple fastens audio speaker and bell wire, insulated cradle protects wire. Plastic insulated straps secure service entrance cable. Electro-zinc plated nails. Cradles constructed of polyethylene. Straps stabilized against UV rays and extreme cold, withstands deterioration and breakage. For metallic and non-metallic cording and cable. Easy to install; drive both zinc plated nails together without splitting wood. Recessed nail heads for minimum exposure. Smooth saddle (3/8" width) prevents damage to insulation. High grade, injection molded polypropylene resists rot, rust, deterioration and effects of extreme temperature; non-conductive for safe and secure cable fastening.
Thomas And Betts Z500-25 Superstrut Beam Clamp Superstrut 200 Series Angle Bracket Fitting Thomas And Betts Z703 1 1/2-10 Superstrut
For hanging rod, silver electroplated finish. For use in metal framing applications. Manufactured from hot rolled carbon steel. Pipe straps hold conduit and pipes in channel. They are inserted along the slot side of the channel and twisted into place. Pre-assembled with locking slot / hex head bolt. Gold-galvanized corrosion free finish.
Gardner Bender GSE-105 Service Entrance Strap Gardner Bender PSB Low Voltage Cable Staple Gardner Bender PMB-1525 Low Voltage Cable Strap
Plastic insulated straps secure service entrance cable. Electro-zinc plated nails. Cradles constructed of polyethylene. Straps stabilized against UV rays and extreme cold, withstands deterioration and breakage. For metallic and non-metallic cording and cable. Constructed of high-grade injection molded polyethylene cradles and zinc-plated nails. Provides toughness, high dielectric strength and longevity. Smooth saddles hold wire securely while preventing damage. For securing speaker, telephone, bell and other low-volt wire. Polyethylene saddle won't rust, rot or deteriorate. Zinc-plated nail resists rust and corrosion. 1 nail per staple. Dives in with a hammer. UL Listed.
Gardner Bender MS-1577 Cable Staple Gardner Bender PSW-1650T Cable Staple Gardner Bender PCC Low Voltage Clip-On Cable Staple
Two-wire staples fasten 2 and 3 conductor non-metallic cable. SIZE: 1/2" x 1" - For 2 conductor (No. 12 and No. 14) NM cable. SIZE: 9/16" x 1-1/4" - For 3 conductor (No. 10 and No. 12) NM, BX, UF and other cable. For metallic and non-metallic cording and cable. Constructed of high-grade injection molded polyethylene cradles and zinc-plated nails. Provides toughness, high dielectric strength and longevity. Smooth saddles hold wire securely while preventing damage. Used for indoor and outdoor applications. UV resistant polyethylene saddle. Zinc plated nails. Secures RG-49, RG-59 and RG-6 coaxial cables. With clip-on feature.
GB-Gardner Bender MSI-1575 Cable Staples GB PTP-25T Category 3 and 5 Low Voltage Data Staple Gardner Bender PS-75 Insulated Cable Staple
Use on NM, BX, UF and other electrical cables. Made from high carbon steel. Cable protected by polyethylene insulation. GB Data Staple, Category 3 and 5, Low Voltage, 1/4 in Crown, Polyethylene, Zinc Plated, Blue, Suitable For Use With: RJ-11, RJ-12, RJ-45, Category 3 and Category 5 Wire to Wood, 1/4 in Width, For Mounting to Wood Surfaces For metallic and non-metallic cording and cable. Easy to install; drive both zinc plated nails together without splitting wood. Recessed nail heads for minimum exposure. Smooth saddle (3/8" width) prevents damage to insulation. High grade, injection molded polypropylene resists rot, rust, deterioration and effects of extreme temperature; non-conductive for safe and secure cable fastening.
Thomas And Betts Z702 3EG-10 Superstrut Gardner Bender PS-1550T Insulated Cable Staple Gardner Bender PS-1575T2 Insulated Cable Staple
Pipe straps hold conduit and pipes in channel. They are inserted along the slot side of the channel and twisted into place. Pre-assembled with locking slot / hex head bolt. For metallic and non-metallic cording and cable. Easy to install; drive both zinc plated nails together without splitting wood. Recessed nail heads for minimum exposure. Smooth saddle (3/8" width) prevents damage to insulation. High grade, injection molded polypropylene resists rot, rust, deterioration and effects of extreme temperature; non-conductive for safe and secure cable fastening. For metallic and non-metallic cording and cable. Easy to install; drive both zinc plated nails together without splitting wood. Recessed nail heads for minimum exposure. Smooth saddle (3/8" width) prevents damage to insulation. High grade, injection molded polypropylene resists rot, rust, deterioration and effects of extreme temperature; non-conductive for safe and secure cable fastening.
Gardner Bender MDI Insulated High Impact Cable Staple Gardner Bender PCS-1600T Low Voltage Masonry Staple Superstrut 200 Flat Right Angle Bracket Corner Plate
Insulated staples protect and secure Romex, NM, BX and UF. PVC insulation protects cable from damage due to mis-hit and overdriving, prevents a short circuit if wire insulation is damaged. Highly visible color coded for size and application. Card/40. Hardened nails can penetrate cement block, mortar or plaster surfaces. For cable TV and other hard-surface installation. Plastic cradle provides added protection to cable jackets. Freeze resistant. UV protected. (Black). Secures RG-49, RG-59 and RG-6 coaxial cables. PCS-1600 has clip-on feature. Splices and supports conduit.
Superstrut 200 Series Flat Straight Bracket Gardner Bender PSW Low Voltage Cable Staple Gardner Bender MSI Insulated Cable Staple
Splices and supports conduit. For securing speaker, telephone, bell and other low-volt wire. Polyethylene saddle won't rust, rot or deteriorate. Zinc-plated nail resists rust and corrosion. 1 nail per staple. Dives in with a hammer. UL Listed. Use on NM, BX, UF and other electrical cables. Made from high carbon steel. Cable protected by polyethylene insulation.
Gardner Bender PR Low Voltage Cable Staple Gardner Bender PSW Cable Staple Gardner Bender PSB Low Voltage Cable Staple
For securing speaker, telephone, bell and other low-volt wire. Polyethylene saddle won't rust, rot or deteriorate. Zinc-plated nail resists rust and corrosion. 1 nail per staple. Dives in with a hammer. UL Listed. For metallic and non-metallic cording and cable. Constructed of high-grade injection molded polyethylene cradles and zinc-plated nails. Provides toughness, high dielectric strength and longevity. Smooth saddles hold wire securely while preventing damage. For metallic and non-metallic cording and cable. Constructed of high-grade injection molded polyethylene cradles and zinc-plated nails. Provides toughness, high dielectric strength and longevity. Smooth saddles hold wire securely while preventing damage.
Gardner Bender PDS Low Voltage Cable Staple Gardner Bender PSW Low Voltage Cable Staple AmerTac Zenith VM1020NAW Coaxial Staple
UV resistant polyethylene saddles, zinc plated nails. Used for inside and outside applications. Clip-on feature enables hands-free installation. Secures multiple RG-59, RG-59. For metallic and non-metallic cording and cable. Constructed of high-grade injection molded polyethylene cradles and zinc-plated nails. Provides toughness, high dielectric strength and longevity. Smooth saddles hold wire securely while preventing damage. Attaches coax cable to a wall. .5" height x .25" width x .25" depth.
Superstrut ZCM1001/4-10 Cone Nut Gardner Bender GSE-310 Service Entrance Staple STAPLE PLAS MASONRY CLIP 1/2IN
Superstrut Cone Nut, 1/4 in Nominal, Nylon Cone, Steel Nut, Galvanized, Gold, For Superstrut Metal Framing and Hanger System Secures service entrance cable. Pointed offset legs drive in straight, will not split wood. High quality carbon steel for durability and easy nailing. Secures Romex, UF and other type-NM cable. Hardened nails can penetrate cement block, mortar or plaster surfaces. Smooth saddle prevents damage to cable insulation.
King 70112 Insulated Cable Staple STAPLES LW VOLT GUN 5/32IN WD STAPLES LW VOLT GUN 1/4IN
Made of 12 gauge carbon steel, insulated with high-impact, hot-melt PVC bonded to the top of the staple, tumble deburred and with rust inhibitor applied. Reduces risk of electrical fire and prevents a short circuit if the insulation is cut. Color coded for size and application and highly visible. Used with BX or Romex 3 conductor, #14, #12, and #10 WG or 2 stacked oval Romex #14 and #12 WG. Rated for up to 2500 volt. Dielectric rating per ETL Test 525777. Intended for use with Gardner Bender? low-volt staple gun. Use to secure telephone, alarm, security, doorbell and speaker cable/wire. Use to secure TV, datacom, CAT 5E, CAT 6 and RG-59 cable/wire.
Carlon Z703 2 Pipe Clamp Gardner Bender PMW Low Voltage Cable Staple GB-Gardner Bender MSI-75 Cable Staples
Pipe straps hold conduit and pipes in channel. They are inserted along the slot side of the channel and twisted into place. Pre-assembled with locking slot / hex head bolt. Gold-galvanized corrosion free finish. For securing speaker, telephone, bell and other low-volt wire. Polyethylene saddle won't rust, rot or deteriorate. Zinc-plated nail resists rust and corrosion. 1 nail per staple. Dives in with a hammer. UL Listed. Use on NM, BX, UF and other electrical cables. Made from high carbon steel. Cable protected by polyethylene insulation.
Gardner Bender GSW-61 Rotary Switch HomeLine HOM140CP Standard Circuit Breaker Thomas And Betts ZA1001/4EG-10 Superstrut
Brass terminals, #18 AWG, 6" stripped wire leads. Single-pole 1" circuit breaker features 10,000 AIR and 120/240 VAC. Uses a thermal-magnetic tripping mechanism for overload and short-circuit protection. Compatible with Homeline load centers and CSED devices. ANSI certified and UL Listed. For use with 'A' and 'C' series channel and inserts.
Thomas And Betts Z502-10 Superstrut Beam Clamp Gardner Bender PS-150Z Insulated Cable Staple Thomas And Betts ZA1003/8EG-10 Superstrut
For hanging rod, silver electroplated finish. For metallic and non-metallic cording and cable. Easy to install; drive both zinc plated nails together without splitting wood. Recessed nail heads for minimum exposure. Smooth saddle (3/8" width) prevents damage to insulation. High grade, injection molded polypropylene resists rot, rust, deterioration and effects of extreme temperature; non-conductive for safe and secure cable fastening. For use with 'A' and 'C' series channel and inserts.
HomeLine HOM130CP Standard Circuit Breaker HomeLine HOM115CP Standard Circuit Breaker HomeLine HOM120CP Standard Circuit Breaker
Single-pole 1" circuit breaker features 10,000 AIR and 120/240 VAC. Uses a thermal-magnetic tripping mechanism for overload and short-circuit protection. Compatible with Homeline load centers and CSED devices. ANSI certified and UL Listed. Single-pole 1" circuit breaker features 10,000 AIR and 120/240 VAC. Uses a thermal-magnetic tripping mechanism for overload and short-circuit protection. Compatible with Homeline load centers and CSED devices. ANSI certified and UL Listed. Single-pole 1" circuit breaker features 10,000 AIR and 120/240 VAC. Uses a thermal-magnetic tripping mechanism for overload and short-circuit protection. Compatible with Homeline load centers and CSED devices. ANSI certified and UL Listed.
Gardner Bender PS-150 Insulated Cable Staple GB-Gardner Bender GSW-24 Canopy Switches MES Q115 Standard Miniature Circuit Breaker
For metallic and non-metallic cording and cable. Easy to install; drive both zinc plated nails together without splitting wood. Recessed nail heads for minimum exposure. Smooth saddle (3/8" width) prevents damage to insulation. High grade, injection molded polypropylene resists rot, rust, deterioration and effects of extreme temperature; non-conductive for safe and secure cable fastening. Maintained contact switch family utilized in applications requiring continuous continuity contacts. Number 18 AWG, 6" stripped wire leads. Mounting nut included. Non-interchangeable trip. 120 volt AC; 10,000 AIR. Will replace American Switch, Westinghouse Type BR, Bryant, Challenger, Sylvania, Crouse-Hinds, Murray, Frank Adams, General Electric (Full size only), General Switch, I-TE, Gould, Montgomery Ward and Sears. UL Listed, HACR rated. 15 and 20 amp UL Listed for frequent switching applications, 120 volt AC fluorescent lighting.  1" per pole.
MES MP115 Type MP-T Circuit Breaker MES MP130 Type MP-T Circuit Breaker MES Q120 Standard Miniature Circuit Breaker
One 1" space per pole. Will replace American Switch, Westinghouse Type BR, Bryant, Challenger, Sylvania, Crouse-Hinds, Murray, Frank Adams, General Electric (Full size only), General Switch, I-TE, Gould, Montgomery Ward and Sears. UL Listed, SWD rated. 120 volt AC fluorescent lighting. 120 volt AC; 10,000 AIR. One 1" space per pole. Will replace American Switch, Westinghouse Type BR, Bryant, Challenger, Sylvania, Crouse-Hinds, Murray, Frank Adams, General Electric (Full size only), General Switch, I-TE, Gould, Montgomery Ward and Sears. UL Listed, SWD rated. 120 volt AC fluorescent lighting. 120 volt AC; 10,000 AIR. Non-interchangeable trip. 120 volt AC; 10,000 AIR. Will replace American Switch, Westinghouse Type BR, Bryant, Challenger, Sylvania, Crouse-Hinds, Murray, Frank Adams, General Electric (Full size only), General Switch, I-TE, Gould, Montgomery Ward and Sears. UL Listed, HACR rated. 15 and 20 amp UL Listed for frequent switching applications, 120 volt AC fluorescent lighting.  1" per pole.
MES Q130 Standard Miniature Circuit Breaker MES MP120 Type MP-T Circuit Breaker Gardner Bender GSE-410 Service Entrance Staple
Non-interchangeable trip. 120 volt AC; 10,000 AIR. Will replace American Switch, Westinghouse Type BR, Bryant, Challenger, Sylvania, Crouse-Hinds, Murray, Frank Adams, General Electric (Full size only), General Switch, I-TE, Gould, Montgomery Ward and Sears. UL Listed, HACR rated. 15 and 20 amp UL Listed for frequent switching applications, 120 volt AC fluorescent lighting.  1" per pole. One 1" space per pole. Will replace American Switch, Westinghouse Type BR, Bryant, Challenger, Sylvania, Crouse-Hinds, Murray, Frank Adams, General Electric (Full size only), General Switch, I-TE, Gould, Montgomery Ward and Sears. UL Listed, SWD rated. 120 volt AC fluorescent lighting. 120 volt AC; 10,000 AIR. Secures service entrance cable. Pointed offset legs drive in straight, will not split wood. High quality carbon steel for durability and easy nailing.
GE THQL1120 Type THQL Q-Line Standard Circuit Breaker GE THQL1130 Type THQL Q-Line Standard Circuit Breaker GE THQL1115 Type THQL Q-Line Standard Circuit Breaker
Copper-to-copper connections, calibrated for optimum trip performance, heat resistant thermoset cases and covers, cemented calibration screw. Type THQL - 1" per pole. May be used, when marked to accept, with American Switch, Arrow Hart, Bryant, General Switch, GTE, Sylvania, most ITE, Murray, Westinghouse Type BR, Challenger and Crouse-Hinds. 15 to 30 amp 14 - 8 Cu or 12 - 8 Al AWG wire, 35 to 60 amp 8 - 3 Cu or 8 - 2 Al AWG wire. UL Listed, HACR rated. 1" module, 120/240 volt; 10,000 AIR. Copper-to-copper connections, calibrated for optimum trip performance, heat resistant thermoset cases and covers, cemented calibration screw. Type THQL - 1" per pole. May be used, when marked to accept, with American Switch, Arrow Hart, Bryant, General Switch, GTE, Sylvania, most ITE, Murray, Westinghouse Type BR, Challenger and Crouse-Hinds. 15 to 30 amp 14 - 8 Cu or 12 - 8 Al AWG wire, 35 to 60 amp 8 - 3 Cu or 8 - 2 Al AWG wire. UL Listed, HACR rated. 1" module, 120/240 volt; 10,000 AIR. Copper-to-copper connections, calibrated for optimum trip performance, heat resistant thermoset cases and covers, cemented calibration screw. Type THQL - 1" per pole. May be used, when marked to accept, with American Switch, Arrow Hart, Bryant, General Switch, GTE, Sylvania, most ITE, Murray, Westinghouse Type BR, Challenger and Crouse-Hinds. 15 to 30 amp 14 - 8 Cu or 12 - 8 Al AWG wire, 35 to 60 amp 8 - 3 Cu or 8 - 2 Al AWG wire. UL Listed, HACR rated. 1" module, 120/240 volt; 10,000 AIR.
GE THQP130 Type THQP Q-Line Standard Circuit Breaker GE THQP120 Type THQP Q-Line Standard Circuit Breaker GE THQP115 Type THQP Q-Line Standard Circuit Breaker
Copper-to-copper connections, calibrated for optimum trip performance, heat resistant thermoset cases and covers, cemented calibration screw. Nearly identical to Type THQL with the same design and performance, yet only taking up 1/2 the space,  1/2" per pole. UL Listed, HACR rated. 15 and 20 amp SWD, switching duty rated, suitable for 120 volt fluorescent lighting loads. 15 to 25 amp #14 - 8 Cu or #12 - 8 Al AWG wire, 30 to 50 amp #8 - 4 Cu or #8 - 2 Al AWG wire. 3-9/32" height x 1/2" width x 2-3/8" depth. 120/240 volt; 10,000 AIR. Copper-to-copper connections, calibrated for optimum trip performance, heat resistant thermoset cases and covers, cemented calibration screw. Nearly identical to Type THQL with the same design and performance, yet only taking up 1/2 the space,  1/2" per pole. UL Listed, HACR rated. 15 and 20 amp SWD, switching duty rated, suitable for 120 volt fluorescent lighting loads. 15 to 25 amp #14 - 8 Cu or #12 - 8 Al AWG wire, 30 to 50 amp #8 - 4 Cu or #8 - 2 Al AWG wire. 3-9/32" height x 1/2" width x 2-3/8" depth. 120/240 volt; 10,000 AIR. Copper-to-copper connections, calibrated for optimum trip performance, heat resistant thermoset cases and covers, cemented calibration screw. Nearly identical to Type THQL with the same design and performance, yet only taking up 1/2 the space,  1/2" per pole. UL Listed, HACR rated. 15 and 20 amp SWD, switching duty rated, suitable for 120 volt fluorescent lighting loads. 15 to 25 amp #14 - 8 Cu or #12 - 8 Al AWG wire, 30 to 50 amp #8 - 4 Cu or #8 - 2 Al AWG wire. 3-9/32" height x 1/2" width x 2-3/8" depth. 120/240 volt; 10,000 AIR.
Thomas And Betts ZU501-10 Superstrut Beam Clamp Eaton BR115 Type BR Miniature Circuit Breaker Eaton BR120 Type BR Miniature Circuit Breaker
For channel. 3-1/16". Switching duty rating. Thermal magnetic 40 degrees C. Interchangeable, will replace: Bryant, Westinghouse and Challenger. Type BR. 120/240 volt, 10,000 AIR. 1" per pole. Switching duty rating. Thermal magnetic 40 degrees C. Interchangeable, will replace: Bryant, Westinghouse and Challenger. Type BR. 120/240 volt, 10,000 AIR. 1" per pole.
Gardner Bender PS-175ZN Insulated Cable Staple HomeLine HOM115C Miniature Standard Circuit Breaker HomeLine HOM130C Miniature Standard Circuit Breaker
For metallic and non-metallic cording and cable. Easy to install; drive both zinc plated nails together without splitting wood. Recessed nail heads for minimum exposure. Smooth saddle (3/8" width) prevents damage to insulation. High grade, injection molded polypropylene resists rot, rust, deterioration and effects of extreme temperature; non-conductive for safe and secure cable fastening. Single-pole 1" circuit breaker features 10,000 AIR and 120/240 VAC. Uses a thermal-magnetic tripping mechanism for overload and short-circuit protection. Compatible with Homeline load centers and CSED devices. ANSI certified and UL Listed. Single-pole 1" circuit breaker features 10,000 AIR and 120/240 VAC. Uses a thermal-magnetic tripping mechanism for overload and short-circuit protection. Compatible with Homeline load centers and CSED devices. ANSI certified and UL Listed.
HomeLine HOM120C Miniature Standard Circuit Breaker Eaton BR130 Type BR Miniature Circuit Breaker Eaton BR140 Type BR Miniature Circuit Breaker
Single-pole 1" circuit breaker features 10,000 AIR and 120/240 VAC. Uses a thermal-magnetic tripping mechanism for overload and short-circuit protection. Compatible with Homeline load centers and CSED devices. ANSI certified and UL Listed. Switching duty rating. Thermal magnetic 40 degrees C. Interchangeable, will replace: Bryant, Westinghouse and Challenger. Type BR. 120/240 volt, 10,000 AIR. 1" per pole. Switching duty rating. Thermal magnetic 40 degrees C. Interchangeable, will replace: Bryant, Westinghouse and Challenger. Type BR. 120/240 volt, 10,000 AIR. 1" per pole.
Eaton BR150 Type BR Miniature Circuit Breaker Thomas And Betts ZA1001/2EG-10 Superstrut Steel City ZCK535-10 Armored Cable Hanger Clip
Switching duty rating. Thermal magnetic 40 degrees C. Interchangeable, will replace: Bryant, Westinghouse and Challenger. Type BR. 120/240 volt, 10,000 AIR. 1" per pole. For use with 'A' and 'C' series channel and inserts. Flexible conduit hanger from drop wire, #8-#12 wire, .433-.535 O.D. cable.
GB-Gardner Bender GSW-25 Canopy Switches GB PSW-160 Low Voltage Cable Staple Steel City R Threaded Rod
Maintained contact switch family utilized in applications requiring continuous continuity contacts. Number 18 AWG, 6" stripped wire leads. Mounting nut included. GB Cable Staple, Low Voltage, 3/16 in Crown, Polyethylene, Zinc Plated, White, For Inside and Outside Applications Framing and hanging applications. Free-running, corrosion resistant, burr-free.
Bussmann TL-15 Time Delay Plug Fuse Bussmann TL Time Delay Low Voltage Plug Fuse Bussmann TL Time Delay Low Voltage Plug Fuse
Heat absorbing metal bead on element link for time delay. Passes motor overload starting currents without needlessly opening. 125 volt maximum. Edison base. UL Listed. Heat absorbing metal bead on element link for time delay. Passes motor overload starting currents without needlessly opening. 125 volt maximum. Edison base. UL Listed. Heat absorbing metal bead on element link for time delay. Passes motor overload starting currents without needlessly opening. 125 volt maximum. Edison base. UL Listed.
Bussmann TL Time Delay Low Voltage Plug Fuse GE THQL1140 Type THQL Q-Line Standard Circuit Breaker GE THQL1150 Type THQL Q-Line Standard Circuit Breaker
Heat absorbing metal bead on element link for time delay. Passes motor overload starting currents without needlessly opening. 125 volt maximum. Edison base. UL Listed. Copper-to-copper connections, calibrated for optimum trip performance, heat resistant thermoset cases and covers, cemented calibration screw. Type THQL - 1" per pole. May be used, when marked to accept, with American Switch, Arrow Hart, Bryant, General Switch, GTE, Sylvania, most ITE, Murray, Westinghouse Type BR, Challenger and Crouse-Hinds. 15 to 30 amp 14 - 8 Cu or 12 - 8 Al AWG wire, 35 to 60 amp 8 - 3 Cu or 8 - 2 Al AWG wire. UL Listed, HACR rated. 1" module, 120/240 volt; 10,000 AIR. Copper-to-copper connections, calibrated for optimum trip performance, heat resistant thermoset cases and covers, cemented calibration screw. Type THQL - 1" per pole. May be used, when marked to accept, with American Switch, Arrow Hart, Bryant, General Switch, GTE, Sylvania, most ITE, Murray, Westinghouse Type BR, Challenger and Crouse-Hinds. 15 to 30 amp 14 - 8 Cu or 12 - 8 Al AWG wire, 35 to 60 amp 8 - 3 Cu or 8 - 2 Al AWG wire. UL Listed, HACR rated. 1" module, 120/240 volt; 10,000 AIR.
GE THQP150 Type THQP Q-Line Standard Circuit Breaker GE THQP140 Type THQP Q-Line Standard Circuit Breaker Gardner Bender PSB Low Voltage Cable Staple
Copper-to-copper connections, calibrated for optimum trip performance, heat resistant thermoset cases and covers, cemented calibration screw. Nearly identical to Type THQL with the same design and performance, yet only taking up 1/2 the space,  1/2" per pole. UL Listed, HACR rated. 15 and 20 amp SWD, switching duty rated, suitable for 120 volt fluorescent lighting loads. 15 to 25 amp #14 - 8 Cu or #12 - 8 Al AWG wire, 30 to 50 amp #8 - 4 Cu or #8 - 2 Al AWG wire. 3-9/32" height x 1/2" width x 2-3/8" depth. 120/240 volt; 10,000 AIR. Copper-to-copper connections, calibrated for optimum trip performance, heat resistant thermoset cases and covers, cemented calibration screw. Nearly identical to Type THQL with the same design and performance, yet only taking up 1/2 the space,  1/2" per pole. UL Listed, HACR rated. 15 and 20 amp SWD, switching duty rated, suitable for 120 volt fluorescent lighting loads. 15 to 25 amp #14 - 8 Cu or #12 - 8 Al AWG wire, 30 to 50 amp #8 - 4 Cu or #8 - 2 Al AWG wire. 3-9/32" height x 1/2" width x 2-3/8" depth. 120/240 volt; 10,000 AIR. For metallic and non-metallic cording and cable. Constructed of high-grade injection molded polyethylene cradles and zinc-plated nails. Provides toughness, high dielectric strength and longevity. Smooth saddles hold wire securely while preventing damage.
Gardner Bender GSW-69 Rotary Switch Superstrut 200 Series Square Conduit Washer Jandorf 61224 Single Circuit Push Button Switch
Black plastic, .516",  brass terminals, #18 AWG, 6" stripped wire leads. GoldGalv finish. Jandorf Push Button Switch, Single Circuit, Series: 61224, 125 V, 1 A, 1 Poles, Contact Configuration: SPST, On/Off, 2-Wire Terminal, Brass, UL Listed, Brass Canopy
Jandorf 61216 Single Circuit Rotary Switch Jandorf 61217 Single Circuit Rotary Switch Gardner Bender GSW-62 Rotary Switch
Jandorf Rotary Switch, Single Circuit, Series: 61216, 125 V, 1 A, Contact Configuration: SPST, On/Off, 1 Poles, 2-Wire Terminal, Black Hat Canopy, UL Listed Jandorf Rotary Switch, Single Circuit, Series: 61217, 125 V, 1 A, Contact Configuration: SPST, On/Off, 1 Poles, 2-Wire Terminal, White Hat Canopy, UL Listed Brass terminals, #18 AWG, 6" stripped wire leads. .406" mounting hole. CSA Listed.
Gardner Bender PEC-31525 Coaxial Cable Clamp GB-Gardner Bender GSW-22 Momentary Switches Superstrut 200 Series Square Conduit Washer
Secures RG-59, RG-6 coaxial. Combo screw for safer installs. Screw-in depth of 1/2". Basic pushbutton screw type terminal switch family utilized in applications requiring intermittent continuity contacts. Mounts in standard 1/2" diameter hole. Mounting nut included. () Indicates momentary action. GoldGalv finish.
GB PSR-25 Low Voltage Coaxial Roofing Staple Gardner Bender MS-500J Cable Staple Jandorf 61220 Single Circuit Rotary Switch
GB Coaxial Roofing Staple, Low Voltage, 1/4 in Crown, Plastic, Black, Suitable For Use With: RG-59 and RG-6 Coaxial Cable into Roofing Shingles, For Inside and Outside Applications Two-wire staples fasten 2 and 3 conductor non-metallic cable. SIZE: 1/2" x 1" - For 2 conductor (No. 12 and No. 14) NM cable. SIZE: 9/16" x 1-1/4" - For 3 conductor (No. 10 and No. 12) NM, BX, UF and other cable. Jandorf Rotary Switch, Single Circuit, Series: 61220, 125 V, 1 A, Contact Configuration: SPST, On/Off, 1 Poles, 2-Wire Terminal, Brass Knob, UL Listed
GB-Gardner Bender GSW-21 Canopy Switches Gardner Bender PS-175 Insulated Cable Staple Superstrut ZCM1003/8-10 Cone Nut
Maintained pushbutton switch. Push On-Push Off. #18 AWG, 6' stripped wire leads. Mounting nut included. For metallic and non-metallic cording and cable. Easy to install; drive both zinc plated nails together without splitting wood. Recessed nail heads for minimum exposure. Smooth saddle (3/8" width) prevents damage to insulation. High grade, injection molded polypropylene resists rot, rust, deterioration and effects of extreme temperature; non-conductive for safe and secure cable fastening. Superstrut Cone Nut, 3/8 in Nominal, Nylon Cone, Steel Nut, Galvanized, Gold, For Superstrut Metal Framing and Hanger System
Gardner Bender GSW-23 Push Button Switch Thomas And Betts Z503-5 Superstrut Beam Clamp Bussmann SL Time Delay Plug Fuse
Basic pushbutton screw type terminal switch family utilized in applications requiring intermittent continuity contacts. Mounts in standard 1/2" diameter hole. Mounting nut included. () Indicates momentary action. For hanging rod, silver electroplated finish. Threaded fuse type, porcelain threads. Heat absorbing metal bead on element link for time delay. Passes motor overload starting currents without needlessly opening. Voltage rating of 125 volt maximum. Rejection base. UL Listed.
Bussmann SL Time Delay Plug Fuse Bussmann SL Time Delay Plug Fuse Bussmann SL Time Delay Plug Fuse
Threaded fuse type, porcelain threads. Heat absorbing metal bead on element link for time delay. Passes motor overload starting currents without needlessly opening. Voltage rating of 125 volt maximum. Rejection base. UL Listed. Threaded fuse type, porcelain threads. Heat absorbing metal bead on element link for time delay. Passes motor overload starting currents without needlessly opening. Voltage rating of 125 volt maximum. Rejection base. UL Listed. Threaded fuse type, porcelain threads. Heat absorbing metal bead on element link for time delay. Passes motor overload starting currents without needlessly opening. Voltage rating of 125 volt maximum. Rejection base. UL Listed.
Bussmann TL-15 Time Delay Plug Fuse Bussmann TL-20 Low Voltage Time Delay Plug Fuse Bussmann TL-25 Low Voltage Time Delay Plug Fuse
Heat absorbing metal bead on element link for time delay. Passes motor overload starting currents without needlessly opening. 125 volt maximum. Edison base. UL Listed. Heat absorbing metal bead on element link for time delay. Passes motor overload starting currents without needlessly opening. 125 volt maximum. Edison base. UL Listed. Heat absorbing metal bead on element link for time delay. Passes motor overload starting currents without needlessly opening. 125 volt maximum. Edison base. UL Listed.
Bussmann TL-30 Low Voltage Time Delay Plug Fuse Jandorf 61215 3-Way Double Circuit Rotary Switch Superstrut ZCM1001/2-10 Cone Nut
Heat absorbing metal bead on element link for time delay. Passes motor overload starting currents without needlessly opening. 125 volt maximum. Edison base. UL Listed. Jandorf Rotary Switch, 3-Way Double Circuit, Series: 61215, 125 V, 3 A, Off/On/On/On, 2 Poles, 4 Positions, 3-Wire Terminal, Brass Knob, UL Listed Superstrut Cone Nut, 1/2 in Nominal, Nylon Cone, Steel Nut, Galvanized, Gold, For Superstrut Metal Framing and Hanger System
Eaton CL115 Type CL Circuit Breaker Eaton CL130 Type CL Circuit Breaker Eaton CL120 Type CL Circuit Breaker
Wire size range #14-4. Type CL replacement breakers, classified as direct replacements by Underwriters Laboratories for Square D HOMELINE, General Electric, Crouse-Hinds, Thomas & Betts, Murray and ITE/Siemens loadcenters. 120/240 volt AC, 10,000 AIC. Requires one 1-Inch (25.4 mm) space. Wire size range #14-4. Type CL replacement breakers, classified as direct replacements by Underwriters Laboratories for Square D HOMELINE, General Electric, Crouse-Hinds, Thomas & Betts, Murray and ITE/Siemens loadcenters. 120/240 volt AC, 10,000 AIC. Requires one 1-Inch (25.4 mm) space. Wire size range #14-4. Type CL replacement breakers, classified as direct replacements by Underwriters Laboratories for Square D HOMELINE, General Electric, Crouse-Hinds, Thomas & Betts, Murray and ITE/Siemens loadcenters. 120/240 volt AC, 10,000 AIC. Requires one 1-Inch (25.4 mm) space.
FUSE REJECT BASE PLUG HD 30AMP Bussmann S-15 Low Voltage Tamper Proof Time Delay Plug Fuse Bussmann S-20 Low Voltage Tamper Proof Time Delay Plug Fuse
Heavy duty. Protects critical motor circuits or motors that cycle on/off frequently. Body sizes prevent interchangeability and dangerous over-fusing. Dual element design, industrial/commercial grade, spring loaded to provide short circuit and overload protection. Non-transferring. Will thread into SA adaptors. UL Listed. 125 volt maximum. 10,000 AIR. Heavy duty. Protects critical motor circuits or motors that cycle on/off frequently. Body sizes prevent interchangeability and dangerous over-fusing. Dual element design, industrial/commercial grade, spring loaded to provide short circuit and overload protection. Non-transferring. Will thread into SA adaptors. UL Listed. 125 volt maximum. 10,000 AIR. Heavy duty. Protects critical motor circuits or motors that cycle on/off frequently. Body sizes prevent interchangeability and dangerous over-fusing. Dual element design, industrial/commercial grade, spring loaded to provide short circuit and overload protection. Non-transferring. Will thread into SA adaptors. UL Listed. 125 volt maximum. 10,000 AIR.
FUSE EDISON BASE PLUG HD 15AMP Bussmann SL-15 Low Voltage Time Delay Plug Fuse Bussmann SL-20 Low Voltage Time Delay Plug Fuse
Used for circuits where motors frequently turn on and off. A simple link element for short-circuits and dangerous overloads plus a series connected element which lets the harmless overload starting currents of motors pass without opening. Threaded fuse type, porcelain threads. Heat absorbing metal bead on element link for time delay. Passes motor overload starting currents without needlessly opening. Voltage rating of 125 volt maximum. Rejection base. UL Listed. Threaded fuse type, porcelain threads. Heat absorbing metal bead on element link for time delay. Passes motor overload starting currents without needlessly opening. Voltage rating of 125 volt maximum. Rejection base. UL Listed.
Bussmann SL-25 Time Delay Plug Fuse Bussmann SL-30 Low Voltage Time Delay Plug Fuse Bussmann T-20 Low Voltage Time Delay Plug Fuse
Threaded fuse type, porcelain threads. Heat absorbing metal bead on element link for time delay. Passes motor overload starting currents without needlessly opening. Voltage rating of 125 volt maximum. Rejection base. UL Listed. Threaded fuse type, porcelain threads. Heat absorbing metal bead on element link for time delay. Passes motor overload starting currents without needlessly opening. Voltage rating of 125 volt maximum. Rejection base. UL Listed. Used for circuits where motors frequently turn on and off. A simple link element for short-circuits and dangerous overloads plus a series connected element which lets the harmless overload starting currents of motors pass without opening.
Bussmann T-30 Low Voltage Time Delay Plug Fuse Bussmann T-6-1/4 Low Voltage Time Delay Plug Fuse Steel City R Threaded Rod
Used for circuits where motors frequently turn on and off. A simple link element for short-circuits and dangerous overloads plus a series connected element which lets the harmless overload starting currents of motors pass without opening. Used for circuits where motors frequently turn on and off. A simple link element for short-circuits and dangerous overloads plus a series connected element which lets the harmless overload starting currents of motors pass without opening. Framing and hanging applications. Free-running, corrosion resistant, burr-free.
Jandorf 61028 Plunger Single Circuit Push Button Switch Gardner Bender MCS-20W Multi Cable Cable Spacer Gardner Bender PS-175J Insulated Cable Staple
Jandorf Push Button Switch, Plunger Single Circuit, Series: 61028, 125 V, 2 A, 1 Poles, Contact Configuration: SPST, Normally OFF, Momentary Snap Operation, Round Shape, 2-Tab Terminal, UL Listed Organizes and secures multiple cable runs on a stud. Secures NM/Romex, coaxial and CAT 5 all on the same staple. Snap lock gate quickly and easily secures all cables. Self-centering tab guides perfect placement on the stud. Secures with a nail or staple for wood studs. Cable combinations (8) NM-B Flat 14-2. For metallic and non-metallic cording and cable. Easy to install; drive both zinc plated nails together without splitting wood. Recessed nail heads for minimum exposure. Smooth saddle (3/8" width) prevents damage to insulation. High grade, injection molded polypropylene resists rot, rust, deterioration and effects of extreme temperature; non-conductive for safe and secure cable fastening.
Cable Boss MPS Cable Staple Cable Boss MPS Cable Staple Jandorf 61212 Single Circuit Push Button Switch
Smooth color saddle prevents damage to insulation. Secures round and flat cable. Legs have 2 barbs for holding strength in wood. For use in CableBoss staple gun. Smooth color saddle prevents damage to insulation. Secures round and flat cable. Legs have 2 barbs for holding strength in wood. For use in CableBoss staple gun. Jandorf Push Button Switch, Single Circuit, Series: 61212, 125 V, 3 A, 1 Poles, Contact Configuration: SPST, On/Off, NIC Operation, 2-Wire Terminal, Nickel Plated, UL Listed
Gardner Bender PS-225J Insulated Cable Staple Area Lighting CPGI-ALR-ACL-11 Photocontrol Bussmann S-6-1/4 Low Voltage Time Delay Plug Fuse
For metallic and non-metallic cording and cable. Easy to install; drive both zinc plated nails together without splitting wood. Recessed nail heads for minimum exposure. Smooth saddle (3/8" width) prevents damage to insulation. High grade, injection molded polypropylene resists rot, rust, deterioration and effects of extreme temperature; non-conductive for safe and secure cable fastening. Converts manually operated interior table lamps to dusk-to-dawn lighting. Plug the control into any interior 120 volt outlet. For incandescent loads only. Heavy duty. Protects critical motor circuits or motors that cycle on/off frequently. Body sizes prevent interchangeability and dangerous over-fusing. Dual element design, industrial/commercial grade, spring loaded to provide short circuit and overload protection. Non-transferring. Will thread into SA adaptors. UL Listed. 125 volt maximum. 10,000 AIR.
Bussmann S-8 Low Voltage Tamper Proof Time Delay Plug Fuse Gardner Bender MS-450J Cable Staple Jandorf 61306 Double Circuit Push Button Switch
Heavy duty. Protects critical motor circuits or motors that cycle on/off frequently. Body sizes prevent interchangeability and dangerous over-fusing. Dual element design, industrial/commercial grade, spring loaded to provide short circuit and overload protection. Non-transferring. Will thread into SA adaptors. UL Listed. 125 volt maximum. 10,000 AIR. Two-wire staples fasten 2 and 3 conductor non-metallic cable. SIZE: 1/2" x 1" - For 2 conductor (No. 12 and No. 14) NM cable. SIZE: 9/16" x 1-1/4" - For 3 conductor (No. 10 and No. 12) NM, BX, UF and other cable. Jandorf Push Button Switch, Double Circuit, Series: 61306, 120 V, 3 A, 1 Poles, Contact Configuration: SPST, Normally Off, Momentary Operation, 2-Screw Terminal, UL Listed, Black Canopy
Bussmann Fusetron T-10 Low Voltage Time Delay Plug Fuse Bussmann T Time Delay Plug Fuse AmerTac SLC4CB-4 Dusk to Dawn Light Control Socket
Used for circuits where motors frequently turn on and off. A simple link element for short-circuits and dangerous overloads plus a series connected element which lets the harmless overload starting currents of motors pass without opening. Used for circuits where motors frequently turn on and off. A simple link element for short-circuits and dangerous overloads plus a series connected element which lets the harmless overload starting currents of motors pass without opening. Indoor/outdoor dusk to dawn light control for incandescent bulbs. Fixed light shutter. 150 watts maximum. Plastic housing. Screw-in connection. 2.2" x 1.5" x 1.5".
AmerTac SLC4CG Self-Tightening Dusk to Dawn Light Control Area Lighting CPGI-ALR-PL-120S- Photocontrol Jandorf 61029 Plunger Single Circuit Push Button Switch
AmerTac Dusk to Dawn Light Control, Self-Tightening, 150 W, Screw-In Connection, 2.2 in Overall Height, 1-1/2 in Overall Width, 1-1/2 in Overall Depth, Plastic, Gray, UL Listed, Number of Lights Controllable: 1, For Indoor/Outdoor Applications Designed for indoor or outdoor use and has a small profile that fits into most table lamps or outdoor post lanterns. 120 volt with a range of  105-130 volts, 150 watt tungsten load rating. Jandorf Push Button Switch, Plunger Single Circuit, Series: 61029, 125 V, 0.75 A, 1 Poles, Contact Configuration: SPST, Normally On, Momentary Operation, Round Shape, 2-Tab Terminal, UL Listed
Bussmann S-10 Low Voltage Time Delay Plug Fuse Jandorf 61221 Single Circuit Push Button Switch Jandorf 61214 3-Way Double Circuit Rotary Switch
Heavy duty. Protects critical motor circuits or motors that cycle on/off frequently. Body sizes prevent interchangeability and dangerous over-fusing. Dual element design, industrial/commercial grade, spring loaded to provide short circuit and overload protection. Non-transferring. Will thread into SA adaptors. UL Listed. 125 volt maximum. 10,000 AIR. Jandorf Push Button Switch, Single Circuit, Series: 61221, 125 V, 1.5 A, 1 Poles, Contact Configuration: SPST, Normally Off, Momentary Operation, 2-Wire Terminal, UL Listed, For Industrial Controlling Circuits Jandorf Rotary Switch, 3-Way Double Circuit, Series: 61214, 125 V, 3 A, Off/On/On/On, 2 Poles, 4 Positions, 3-Wire Terminal, Brass Knob, UL Listed
Jandorf 61005 Single Circuit Rotary Switch ADAPTER FUSE PLUG 7-15 AMP    AmerTac SLC5BCB-4 Dawn Light Control
Jandorf Rotary Switch, Single Circuit, Series: 61005, 125 V, 6.5 A, Contact Configuration: TPST, Off/On/On/On, 1 Poles, 5-Tab Terminal, Black, UL Listed Fustat adapters for using S and SL rejection plug fuses in Edison base sockets. Converts Edison base receptacles to accept a rejection base fuse. AmerTac Dawn Light Control, 150 W, Dusk On - Dawn OFF Timing Range, Screw-In Connection, 3 in Overall Height, 2.2 in Overall Width, 1.7 in Overall Depth, Plastic, Includes: Removable Lens Shield to Block Light Reflection, Reducing Blinking, For Outdoor/Indoor, Driveways, Entrances and Patio Lights
Area Lighting CPGI-ALR-PL-120S Photocontrol AmerTac SLC5BCW-4 Dusk to Dawn Light Control Socket Homebasix SS-BK-31-CH Tote Baskets
Electrical components polycarbonate. Compact screw-in control for up to 150 watt incandescent, CFL, LED and halogen lamps. Outdoor/indoor dusk to dawn light control. Turns compact fluorescent, LED, halogen, and incandescent bulbs on at dusk, off at dawn. Includes removable lens shield to block light reflection, reducing blinking. 150 watts maximum. Plastic housing. Screw-in connection. Great for storing and transporting kitchen and bath items. 7-1/2"H x 12"W x 8-7/8"D
Square D QO140CP Type QO Standard Circuit Breaker Square D QO150CP Type QO Standard Circuit Breaker Square D QO115CP Type QO Standard Circuit Breaker
Single-pole 3/4" circuit breaker provides overload and short circuit protection. Features a red Visi-Trip indicator to identify a tripped breaker. Accepts aluminum or copper conductors. Rated for 120/240Vac and at 10,000 Ampre Interrupting Rating (AIR). CSA approved to only install in Canadian Square D loadcentres. Single-pole 3/4" circuit breaker provides overload and short circuit protection. Features a red Visi-Trip indicator to identify a tripped breaker. Accepts aluminum or copper conductors. Rated for 120/240Vac and at 10,000 Ampre Interrupting Rating (AIR). CSA approved to only install in Canadian Square D loadcentres. Single-pole 3/4" circuit breaker provides overload and short circuit protection. Features a red Visi-Trip indicator to identify a tripped breaker. Accepts aluminum or copper conductors. Rated for 120/240Vac and at 10,000 Ampre Interrupting Rating (AIR). CSA approved to only install in Canadian Square D loadcentres.
Square D QO120CP Type QO Standard Circuit Breaker Square D QO130CP Type QO Standard Circuit Breaker Square D QO115C Miniature Standard Circuit Breaker
Single-pole 3/4" circuit breaker provides overload and short circuit protection. Features a red Visi-Trip indicator to identify a tripped breaker. Accepts aluminum or copper conductors. Rated for 120/240Vac and at 10,000 Ampre Interrupting Rating (AIR). CSA approved to only install in Canadian Square D loadcentres. Single-pole 3/4" circuit breaker provides overload and short circuit protection. Features a red Visi-Trip indicator to identify a tripped breaker. Accepts aluminum or copper conductors. Rated for 120/240Vac and at 10,000 Ampre Interrupting Rating (AIR). CSA approved to only install in Canadian Square D loadcentres. Single-pole 3/4" circuit breaker provides overload and short circuit protection. Features a red Visi-Trip indicator to identify a tripped breaker. Accepts aluminum or copper conductors. Rated for 120/240Vac and at 10,000 Ampre Interrupting Rating (AIR). CSA approved to only install in Canadian Square D loadcentres.
Square D QO120C Miniature Standard Circuit Breaker Jandorf 61004 Rotary Switch ADAPTER FUSE PLUG 20 AMP
Single-pole 3/4" circuit breaker provides overload and short circuit protection. Features a red Visi-Trip indicator to identify a tripped breaker. Accepts aluminum or copper conductors. Rated for 120/240Vac and at 10,000 Ampre Interrupting Rating (AIR). CSA approved to only install in Canadian Square D loadcentres. Jandorf Rotary Switch, Series: 61004, 125 V, 3 A, Contact Configuration: TPST, Off/L1/L2/L3, 3 Poles, 4-Push-In Terminal, Black, UL Listed, 3-Speed Fustat adapters for using S and SL rejection plug fuses in Edison base sockets. Converts Edison base receptacles to accept a rejection base fuse.
Square D QO130C Miniature Standard Circuit Breaker Jandorf 61213 Double Circuit Push Button Switch Jandorf 61204 Rotary Switch
Single-pole 3/4" circuit breaker provides overload and short circuit protection. Features a red Visi-Trip indicator to identify a tripped breaker. Accepts aluminum or copper conductors. Rated for 120/240Vac and at 10,000 Ampre Interrupting Rating (AIR). CSA approved to only install in Canadian Square D loadcentres. Jandorf Push Button Switch, Double Circuit, Series: 61213, 125 V, 3 A, 1 Poles, 4 Positions, Contact Configuration: 3-Way, Off/On/On/On, 3-Wire Terminal, Brass, UL Listed, L1/L2/L1-2/Off, For Commercial and Industrial Jandorf Rotary Switch, Series: 61204, 125 V, 6.5 A, Contact Configuration: TPST, Off/L1/L2/L3, 3 Poles, 4-Wire Terminal, Black, UL Listed, 3-Speed
Cable Boss MPS Insulated Cable Staple Jandorf 61036 Single Circuit Push Button Switch Jandorf 61123 Single Circuit Push Button Switch
Smooth color saddle prevents damage to insulation. Secures round and flat cable. Legs have 2 barbs for holding strength in wood. For use in CableBoss staple gun. Jandorf Push Button Switch, Single Circuit, Series: 61036, 125 V, 5 A, 1 Poles, Contact Configuration: SPST, On/Off, 2-Wire Terminal, Nickel Plated, UL Listed Jandorf Push Button Switch, Single Circuit, Series: 61123, 125 V, 10 A, 1 Poles, Contact Configuration: SPST, Normally Off, Momentary Operation, 2-Screw Terminal, UL Listed
Steel City R Threaded Rod Zenith 77WW Bath Mat AmerTac OLC5CFLBC-4 Dusk to Dawn Floodlight Control Photocell
Framing and hanging applications. Free-running, corrosion resistant, burr-free. Bath mats coordinate with any bathroom style and are sized to fit perfectly in any standard tub or shower. Outdoor dusk to dawn floodlight light control for Halogen/CFL/LED bulbs. Long stem design fits inside most flood lights, spot lights or enclosed exterior fixtures. Turns compact fluorescent, LED, halogen and incandescent bulbs on at dusk, off at dawn. 150 watts maximum. Plastic housing, 4.3" x 3.35" x 3.35".
Jandorf 61001 Plunger Single Circuit Push Button Switch Eaton CH115 Type CH Circuit Breaker Eaton CH120 Type CH Circuit Breaker
Jandorf Push Button Switch, Plunger Single Circuit, Series: 61001, 125 V, 0.25 A, 1 Poles, Contact Configuration: SPST, Normally Off, Momentary Operation, 2-Screw Terminal, UL Listed Quick make, quick break switch, inverse time element tripping operation and trip free handle. Thermal-magnetic trip curve. UL Listed, HACR rated, meets NEMA standards and Federal Specifications, CSA certified. 120/240 volt AC. 10,000 AIR. 3/4" per pole. Quick make, quick break switch, inverse time element tripping operation and trip free handle. Thermal-magnetic trip curve. UL Listed, HACR rated, meets NEMA standards and Federal Specifications, CSA certified. 120/240 volt AC. 10,000 AIR. 3/4" per pole.
Eaton CH130 Type CH Miniature Circuit Breaker Eaton CH140 Type CH Circuit Breaker Jandorf 61120 Single Circuit Push Button Switch
Quick make, quick break switch, inverse time element tripping operation and trip free handle. Thermal-magnetic trip curve. UL Listed, HACR rated, meets NEMA standards and Federal Specifications, CSA certified. 120/240 volt AC. 10,000 AIR. 3/4" per pole. Quick make, quick break switch, inverse time element tripping operation and trip free handle. Thermal-magnetic trip curve. UL Listed, HACR rated, meets NEMA standards and Federal Specifications, CSA certified. 120/240 volt AC. 10,000 AIR. 3/4" per pole. Jandorf Push Button Switch, Single Circuit, Series: 61120, 125 V, 10 A, 1 Poles, Contact Configuration: SPST, Normally Off, Momentary Operation, 2-Tab Terminal, UL Listed
Jandorf 61121 Single Circuit Push Button Switch HomeLine HOMT2020CP Tandem Twin Circuit Breaker HomeLine HOMT1515CP Tandem Circuit Breaker
Jandorf Push Button Switch, Single Circuit, Series: 61121, 125 V, 10 A, 1 Poles, Contact Configuration: SPST, Normally On, Momentary Operation, 2-Tab Terminal, UL Listed Tandem 1" single-pole circuit breaker. Offers 2 circuits in the space of 1. Features 10,000 AIR and 120/240 VAC. Thermal-magnetic tripping mechanism for overload and short-circuit protection of the electrical system. Accepts aluminum or copper conductors. CSA approved to only install in Canadian HomeLine loadcentres. Tandem 1" single-pole circuit breaker. Offers 2 circuits in the space of 1. Features 10,000 AIR and 120/240 VAC. Thermal-magnetic tripping mechanism for overload and short-circuit protection of the electrical system. Accepts aluminum or copper conductors. CSA approved to only install in Canadian HomeLine loadcentres.
Jandorf 61206 3-Way Double Circuit Rotary Switch Jandorf 61011 Plunger Single Circuit Push Button Switch Jandorf 61037 Plunger Single Circuit Push Button Switch
Jandorf Rotary Switch, 3-Way Double Circuit, Series: 61206, 125 V, 3 A, Off/L1/L2/L1-2, 2 Poles, 4 Positions, 3-Wire Terminal, Brass Knob, UL Listed, 2-Speed Jandorf Push Button Switch, Plunger Single Circuit, Series: 61011, 125 V, 5 A, 1 Poles, Contact Configuration: SPST, Normally On, Momentary Operation, 5/8 in, Round Shape, 2-Tab Terminal, UL Listed Jandorf Push Button Switch, Plunger Single Circuit, Series: 61037, 125 V, 0.25 A, 1 Poles, Contact Configuration: SPST, Normally On, Momentary Operation, 2-Screw Terminal, UL Listed
Jandorf 61010 Long Plunger Single Circuit Push Button Switch Jandorf 61203 Double Circuit Push Button Switch Jandorf 61031 Long Plunger Single Circuit Push Button Switch
Jandorf Push Button Switch, Long Plunger Single Circuit, Series: 61010, 250 V, 10 A, 1 Poles, Contact Configuration: SPST, Normally On/Off, Momentary Operation, Rectangle Shape, 3-Tab Terminal, UL Listed Jandorf Push Button Switch, Double Circuit, Series: 61203, 125 V, 1 A, 2 Poles, 4 Positions, Contact Configuration: 3-Way, Off/On/On/On, 3-Wire Terminal, Nickel Plated, UL Listed, 2-Speed, For Commercial and Industrial Jandorf Push Button Switch, Long Plunger Single Circuit, Series: 61031, 125 V, 21 A, 1 Poles, Contact Configuration: SPDT, Normally On/Off, Momentary Snap Operation, 3-Tab Terminal, UL Listed
Jandorf 61122 Single Circuit Push Button Switch Jandorf 61027 Plunger Short Push Button Switch