Home > PLUMBING > KITCHEN & BATH > BATHROOM HARDWARE > TISSUE HOLDERS
Sort By:
1
Carlon E940D-CTN Standard Conduit Coupling Carlon E943D-CTN Terminal Adapter Carlon E940E-CTN/CAR Standard Conduit Coupling
Safe, non-conductive. Schedule 40 non-metallic socket type coupling for joining Schedule 40 non-metallic conduit. Will not rust or corrode. RoHS Compliance, UL Listed. Safe, non-conductive. For adapting schedule 40 non-metallic conduit to boxes, threaded fittings, metallic systems. Male threads on one end, socket end on the other. Will not rust or corrode. UL Listed, RoHS Compliance. Safe, non-conductive. Schedule 40 non-metallic socket type coupling for joining Schedule 40 non-metallic conduit. Will not rust or corrode. RoHS Compliance, UL Listed.
Carlon E942DR-CTN Conduit Adapter Carlon E942ER-CTN Conduit Adapter Carlon E940FR-CTN Standard Conduit Coupling
Safe, non-conductive. For adapting Schedule 40 non-metallic conduit to boxes, threaded fittings, metallic systems. Female threads one end, socket end on the other. Will not rust or corrode. Safe, non-conductive. For adapting Schedule 40 non-metallic conduit to boxes, threaded fittings, metallic systems. Female threads one end, socket end on the other. Will not rust or corrode. Safe, non-conductive. Schedule 40 non-metallic socket type coupling for joining Schedule 40 non-metallic conduit. Will not rust or corrode. RoHS Compliance, UL Listed.
Carlon E943E-CTN Terminal Adapter Carlon E943FR-CTN Terminal Adapter Carlon E996DR-CTN Conduit Box Adapter
Safe, non-conductive. For adapting schedule 40 non-metallic conduit to boxes, threaded fittings, metallic systems. Male threads on one end, socket end on the other. Will not rust or corrode. UL Listed, RoHS Compliance. Safe, non-conductive. For adapting schedule 40 non-metallic conduit to boxes, threaded fittings, metallic systems. Male threads on one end, socket end on the other. Will not rust or corrode. UL Listed, RoHS Compliance. For PVC enclosures. cULus Listed.
Carlon E940GR-CTN Standard Conduit Coupling Carlon E942FR-CTN Conduit Adapter Carlon UA9ADB-CTN Standard Radius Rigid Conduit Elbow
Safe, non-conductive. Schedule 40 non-metallic socket type coupling for joining Schedule 40 non-metallic conduit. Will not rust or corrode. RoHS Compliance, UL Listed. Safe, non-conductive. For adapting Schedule 40 non-metallic conduit to boxes, threaded fittings, metallic systems. Female threads one end, socket end on the other. Will not rust or corrode. For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant. Schedule 40. UL 651 Listed to the NEC by the ETL, UL Listed.
Carlon E996ER-CTN Conduit Box Adapter Carlon UA9ADR-CTN Standard Radius Conduit Elbow Carlon E940HR-CTN Standard Conduit Coupling
For PVC enclosures. cULus Listed. For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant. Safe, non-conductive. Schedule 40 non-metallic socket type coupling for joining Schedule 40 non-metallic conduit. Will not rust or corrode. RoHS Compliance, UL Listed.
Carlon E943GR-CTN Terminal Adapter Carlon UA7ADB-CTN Standard Radius Conduit Elbow Carlon UA9AER-CTN Standard Radius Conduit Elbow
Safe, non-conductive. For adapting schedule 40 non-metallic conduit to boxes, threaded fittings, metallic systems. Male threads on one end, socket end on the other. Will not rust or corrode. UL Listed, RoHS Compliance. For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant. UL Listed E35297. For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant.
Carlon UA7ADR-CAR Standard Radius Conduit Elbow Carlon E943HR-CTN Terminal Adapter Carlon UA9AEB-CTN Standard Radius Rigid Conduit Elbow
For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant. UL Listed E35297. Safe, non-conductive. For adapting schedule 40 non-metallic conduit to boxes, threaded fittings, metallic systems. Male threads on one end, socket end on the other. Will not rust or corrode. UL Listed, RoHS Compliance. For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant. Schedule 40. UL 651 Listed to the NEC by the ETL, UL Listed.
Carlon E942GR-CTN Conduit Adapter Thomas & Betts E950ED-CTN Reducing Bushing Carlon UA7AER-CAR Standard Radius Conduit Elbow
Safe, non-conductive. For adapting Schedule 40 non-metallic conduit to boxes, threaded fittings, metallic systems. Female threads one end, socket end on the other. Will not rust or corrode. For connecting different sizes of conduit. Socket both ends, for reducing male Schedule 40/80 conduit runs or fittings to female. Non-conductive. Will not rust or corrode. For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant. UL Listed E35297.
Carlon E940JR-CTN Standard Conduit Coupling Carlon E942HR Conduit Adapter Carlon UA7AEB-CTN Standard Radius Conduit Elbow
Safe, non-conductive. Schedule 40 non-metallic socket type coupling for joining Schedule 40 non-metallic conduit. Will not rust or corrode. RoHS Compliance, UL Listed. Safe, non-conductive. For adapting Schedule 40 non-metallic conduit to boxes, threaded fittings, metallic systems. Female threads one end, socket end on the other. Will not rust or corrode. For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant. UL Listed E35297.
Carlon UA9AFR-CTN Standard Radius Conduit Elbow Carlon E943JRR Terminal Adapter Carlon E942JR Conduit Adapter
For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant. Safe, non-conductive. For adapting schedule 40 non-metallic conduit to boxes, threaded fittings, metallic systems. Male threads on one end, socket end on the other. Will not rust or corrode. UL Listed, RoHS Compliance. Safe, non-conductive. For adapting Schedule 40 non-metallic conduit to boxes, threaded fittings, metallic systems. Female threads one end, socket end on the other. Will not rust or corrode.
Carlon UA7AFR-CAR Standard Radius Conduit Elbow Carlon UA9AFB-CTN Standard Radius Conduit Elbow Carlon UA7AFB-CTN Standard Radius Conduit Elbow
For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant. UL Listed E35297. For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant. Schedule 40. UL 651 Listed to the NEC by the ETL, UL Listed. For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant. UL Listed E35297.
Thomas & Betts E994DR-CTN Conduit Offset Carlon E950FD-CAR Reducing Conduit Bushing Carlon UA9AGR-CTN Standard Radius Conduit Elbow
Non-conductive. Will not rust or corrode. For connecting different sizes of conduit. Socket both ends, for reducing male Schedule 40/80 conduit runs or fittings to female. Non-conductive. Will not rust or corrode. For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant.
Carlon UA7AGR-CAR Standard Radius Conduit Elbow Carlon E940K-CTN Conduit Coupling Thomas & Betts E950FE-CTN Reducing Bushing
For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant. UL Listed E35297. Safe, non-conductive. Schedule 40 non-metallic socket type coupling for joining Schedule 40 non-metallic conduit. Will not rust or corrode. RoHS Compliance, UL Listed. For connecting different sizes of conduit. Socket both ends, for reducing male Schedule 40/80 conduit runs or fittings to female. Non-conductive. Will not rust or corrode.
Carlon E943K-CTN Terminal Adapter Carlon UA7AGB-CAR Standard Radius Conduit Elbow Worldwide Sourcing PMB-001-3L Tissue Roller
Safe, non-conductive. For adapting schedule 40 non-metallic conduit to boxes, threaded fittings, metallic systems. Male threads on one end, socket end on the other. Will not rust or corrode. UL Listed, RoHS Compliance. For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant. UL Listed E35297. Homebasix Toilet Paper Roller, Plastic, White
ROD HOLDER TOILET PAPER WHITE Thomas & Betts E994ER-CTN Conduit Offset Carlon UA9AH-CAR Standard Radius Conduit Elbow
Spring loaded, fits most toilet brackets, white finish. Non-conductive. Will not rust or corrode. For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant.
Mintcraft LBE02002-51-07 Tissue Rollers Carlon UA7AHR-CTN Standard Radius Conduit Elbow Carlon E985D-CTN Rigid Conduit Body
Mintcraft Toilet Paper Roller, Plastic, White For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant. UL Listed E35297. For easy access and pulling of wires through conduit run. Textured lid, foam-in-place gasket. For use with Schedule 40/80 non-metallic solvent weld fittings. Will not rust or corrode.
Carlon E984D-CTN Rigid Conduit Body Carlon UB9AD-CAR Standard Radius Conduit Elbow Thomas & Betts E986D-CTN Type LB Rigid/IMC Conduit Body
For easy access and pulling of wires through conduit run. For use with Schedule 40/80 non-metallic solvent weld fittings. Will not rust or corrode. For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant. Rigid non-metallic Type LB conduit body. For easy access and pulling of wires through conduit run. For use with Schedule 40 non-metallic solvent weld fittings. Will not rust or corrode. With textured lid and foam-in-place gasket. Hubs are not threaded. UL Listed, RoHS Compliance.
Carlon E940LR/CTN Conduit Coupling Carlon E950GE-CAR Reducing Conduit Bushing Thomas & Betts E950GF-CTN Reducing Bushing
Safe, non-conductive. Schedule 40 non-metallic socket type coupling for joining Schedule 40 non-metallic conduit. Will not rust or corrode. RoHS Compliance, UL Listed. For connecting different sizes of conduit. Socket both ends, for reducing male Schedule 40/80 conduit runs or fittings to female. Non-conductive. Will not rust or corrode. For connecting different sizes of conduit. Socket both ends, for reducing male Schedule 40/80 conduit runs or fittings to female. Non-conductive. Will not rust or corrode.
Carlon UA9AGB-CTN Standard Radius Conduit Elbow Carlon E987D-CTN Rigid Conduit Body Plumb Pak PP23535 Adjustable Toilet Paper Roller
For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant. Schedule 40. UL 651 Listed to the NEC by the ETL, UL Listed. For easy access and pulling of wires through conduit run. For use with Schedule 40/80 non-metallic solvent weld fittings. Will not rust or corrode. UL Listed. 3/8" ends.
Plumb Pak PP835-35 Adjustable Toilet Paper Roller Carlon UA7AHB-CAR Standard Radius Conduit Elbow Carlon E983D-CTN Rigid IMC Conduit Body
3/8" ends. For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant. UL Listed E35297. For easy access and pulling of wires through conduit run. For use with Schedule 40/80 non-metallic solvent weld fittings. Will not rust or corrode.
Thomas & Betts E950HGR Reducing Bushing World Wide Sourcing PMB-003 Shower Rod Holder Carlon UA9AHB-CTN Standard Radius Rigid Conduit Elbow
For connecting different sizes of conduit. Socket both ends, for reducing male Schedule 40/80 conduit runs or fittings to female. Non-conductive. Will not rust or corrode. Fits 1" O.D. For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant. Schedule 40. UL 651 Listed to the NEC by the ETL, UL Listed.
Carlon E942K-CAR Conduit Adapter Carlon E943L-CAR Terminal Adapter Carlon UB9AE-CAR Standard Radius Conduit Elbow
Safe, non-conductive. For adapting Schedule 40 non-metallic conduit to boxes, threaded fittings, metallic systems. Female threads one end, socket end on the other. Will not rust or corrode. Safe, non-conductive. For adapting schedule 40 non-metallic conduit to boxes, threaded fittings, metallic systems. Male threads on one end, socket end on the other. Will not rust or corrode. UL Listed, RoHS Compliance. For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant.
Carlon E950JHR Reducing Conduit Bushing Mintcraft CSC3L003 Tissue Rollers ROD HOLDER TOILET PAPER CHROME
For connecting different sizes of conduit. Socket both ends, for reducing male Schedule 40/80 conduit runs or fittings to female. Non-conductive. Will not rust or corrode. Mintcraft Toilet Paper Roller, Chrome Spring-loaded replacement for toilet paper roller.
Carlon E983E-CTN Rigid IMC Conduit Body Carlon UB9AF-CAR Standard Radius Conduit Elbow Thomas & Betts E986E-CTN Type LB Rigid/IMC Conduit Body
For easy access and pulling of wires through conduit run. For use with Schedule 40/80 non-metallic solvent weld fittings. Will not rust or corrode. For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant. Rigid non-metallic Type LB conduit body. For easy access and pulling of wires through conduit run. For use with Schedule 40 non-metallic solvent weld fittings. Will not rust or corrode. With textured lid and foam-in-place gasket. Hubs are not threaded. UL Listed, RoHS Compliance.
Plumb Pak PP836-44 Adjustable Toilet Paper Roller Carlon E985E-CTN Rigid Conduit Body Carlon E984E-CTN Rigid Conduit Body
Plumb Pak Toilet Paper Roller, Adjustable, Chrome Plated, 3/8 in Roller Ends For easy access and pulling of wires through conduit run. Textured lid, foam-in-place gasket. For use with Schedule 40/80 non-metallic solvent weld fittings. Will not rust or corrode. For easy access and pulling of wires through conduit run. For use with Schedule 40/80 non-metallic solvent weld fittings. Will not rust or corrode.
Thomas & Betts E986F-CTN Type LB Rigid/IMC Conduit Body World Wide Sourcing PMB-004 Shower Rod Holder Decko 38090 Toilet Tissue Holder
Rigid non-metallic Type LB conduit body. For easy access and pulling of wires through conduit run. For use with Schedule 40 non-metallic solvent weld fittings. Will not rust or corrode. With textured lid and foam-in-place gasket. Hubs are not threaded. UL Listed, RoHS Compliance. 1" O.D. ABS. Chrome plated for durability. Scratch and rust resistant. Plastic roller. Easy to install. Hardware included.
Carlon UA7AJ-CAR Standard Radius Conduit Elbow Decko 38890 Toilet Tissue Holder Carlon E983FR-CTN Rigid IMC Conduit Body
For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant. UL Listed E35297. Chrome plated for durability. Scratch and rust resistant. Plastic roller. Easy to install. Hardware included. For easy access and pulling of wires through conduit run. For use with Schedule 40/80 non-metallic solvent weld fittings. Will not rust or corrode.
Carlon E987E-CTN Rigid Conduit Body Carlon UA7AJB-CAR Standard Radius Conduit Elbow Mintcraft BE02006-07-SOU Tissue Roller
For easy access and pulling of wires through conduit run. For use with Schedule 40/80 non-metallic solvent weld fittings. Will not rust or corrode. UL Listed. For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant. UL Listed E35297. Mintcraft Toilet Paper Roller, Brushed Nickel
Carlon E942L-CAR Conduit Adapter Plumb Pak PP825-21 Shower Rod Flange Carlon E990DR-CAR Access Pull Standard Radius Conduit Elbow
Safe, non-conductive. For adapting Schedule 40 non-metallic conduit to boxes, threaded fittings, metallic systems. Female threads one end, socket end on the other. Will not rust or corrode. Fits 1" shower rod, chrome steel. Access pull point for cable in tight radius. Allows conduit changes in direction. Won't rust or corrode. Gasket included.
Carlon UA9AJ-CAR Standard Radius Conduit Elbow Carlon UA9AJB-CAR Standard Radius Conduit Elbow Mintcraft BE02006-35-07-SOU Tissue Roller
For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant. For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant. Schedule 40. UL 651 Listed to the NEC by the ETL, UL Listed. Mintcraft Toilet Paper Roller, Venetian Bronze
Carlon E987F-CAR Rigid Conduit Body ROD HOLDER SHOWER CURTAIN ADJ Gardner Bender GSW-61 Rotary Switch
For easy access and pulling of wires through conduit run. For use with Schedule 40/80 non-metallic solvent weld fittings. Will not rust or corrode. UL Listed. Plastic construction, wall-mounted, adjustable design, pressure-sensitive backing. Brass terminals, #18 AWG, 6" stripped wire leads.
HomeLine HOM140CP Standard Circuit Breaker Carlon E990ER-CAR Access Pull Standard Radius Conduit Elbow Carlon UB9AG-CAR Standard Radius Conduit Elbow
Single-pole 1" circuit breaker features 10,000 AIR and 120/240 VAC. Uses a thermal-magnetic tripping mechanism for overload and short-circuit protection. Compatible with Homeline load centers and CSED devices. ANSI certified and UL Listed. Access pull point for cable in tight radius. Allows conduit changes in direction. Won't rust or corrode. Gasket included. For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant.
HomeLine HOM130CP Standard Circuit Breaker HomeLine HOM115CP Standard Circuit Breaker HomeLine HOM120CP Standard Circuit Breaker
Single-pole 1" circuit breaker features 10,000 AIR and 120/240 VAC. Uses a thermal-magnetic tripping mechanism for overload and short-circuit protection. Compatible with Homeline load centers and CSED devices. ANSI certified and UL Listed. Single-pole 1" circuit breaker features 10,000 AIR and 120/240 VAC. Uses a thermal-magnetic tripping mechanism for overload and short-circuit protection. Compatible with Homeline load centers and CSED devices. ANSI certified and UL Listed. Single-pole 1" circuit breaker features 10,000 AIR and 120/240 VAC. Uses a thermal-magnetic tripping mechanism for overload and short-circuit protection. Compatible with Homeline load centers and CSED devices. ANSI certified and UL Listed.
GB-Gardner Bender GSW-24 Canopy Switches Thomas & Betts E986GR Type LB Rigid/IMC Conduit Body MES Q115 Standard Miniature Circuit Breaker
Maintained contact switch family utilized in applications requiring continuous continuity contacts. Number 18 AWG, 6" stripped wire leads. Mounting nut included. Rigid non-metallic Type LB conduit body. For easy access and pulling of wires through conduit run. For use with Schedule 40 non-metallic solvent weld fittings. Will not rust or corrode. With textured lid and foam-in-place gasket. Hubs are not threaded. UL Listed, RoHS Compliance. Non-interchangeable trip. 120 volt AC; 10,000 AIR. Will replace American Switch, Westinghouse Type BR, Bryant, Challenger, Sylvania, Crouse-Hinds, Murray, Frank Adams, General Electric (Full size only), General Switch, I-TE, Gould, Montgomery Ward and Sears. UL Listed, HACR rated. 15 and 20 amp UL Listed for frequent switching applications, 120 volt AC fluorescent lighting.  1" per pole.
MES MP115 Type MP-T Circuit Breaker MES MP130 Type MP-T Circuit Breaker MES Q120 Standard Miniature Circuit Breaker
One 1" space per pole. Will replace American Switch, Westinghouse Type BR, Bryant, Challenger, Sylvania, Crouse-Hinds, Murray, Frank Adams, General Electric (Full size only), General Switch, I-TE, Gould, Montgomery Ward and Sears. UL Listed, SWD rated. 120 volt AC fluorescent lighting. 120 volt AC; 10,000 AIR. One 1" space per pole. Will replace American Switch, Westinghouse Type BR, Bryant, Challenger, Sylvania, Crouse-Hinds, Murray, Frank Adams, General Electric (Full size only), General Switch, I-TE, Gould, Montgomery Ward and Sears. UL Listed, SWD rated. 120 volt AC fluorescent lighting. 120 volt AC; 10,000 AIR. Non-interchangeable trip. 120 volt AC; 10,000 AIR. Will replace American Switch, Westinghouse Type BR, Bryant, Challenger, Sylvania, Crouse-Hinds, Murray, Frank Adams, General Electric (Full size only), General Switch, I-TE, Gould, Montgomery Ward and Sears. UL Listed, HACR rated. 15 and 20 amp UL Listed for frequent switching applications, 120 volt AC fluorescent lighting.  1" per pole.
MES Q130 Standard Miniature Circuit Breaker MES MP120 Type MP-T Circuit Breaker GE THQL1120 Type THQL Q-Line Standard Circuit Breaker
Non-interchangeable trip. 120 volt AC; 10,000 AIR. Will replace American Switch, Westinghouse Type BR, Bryant, Challenger, Sylvania, Crouse-Hinds, Murray, Frank Adams, General Electric (Full size only), General Switch, I-TE, Gould, Montgomery Ward and Sears. UL Listed, HACR rated. 15 and 20 amp UL Listed for frequent switching applications, 120 volt AC fluorescent lighting.  1" per pole. One 1" space per pole. Will replace American Switch, Westinghouse Type BR, Bryant, Challenger, Sylvania, Crouse-Hinds, Murray, Frank Adams, General Electric (Full size only), General Switch, I-TE, Gould, Montgomery Ward and Sears. UL Listed, SWD rated. 120 volt AC fluorescent lighting. 120 volt AC; 10,000 AIR. Copper-to-copper connections, calibrated for optimum trip performance, heat resistant thermoset cases and covers, cemented calibration screw. Type THQL - 1" per pole. May be used, when marked to accept, with American Switch, Arrow Hart, Bryant, General Switch, GTE, Sylvania, most ITE, Murray, Westinghouse Type BR, Challenger and Crouse-Hinds. 15 to 30 amp 14 - 8 Cu or 12 - 8 Al AWG wire, 35 to 60 amp 8 - 3 Cu or 8 - 2 Al AWG wire. UL Listed, HACR rated. 1" module, 120/240 volt; 10,000 AIR.
GE THQL1130 Type THQL Q-Line Standard Circuit Breaker GE THQL1140 Type THQL Q-Line Standard Circuit Breaker GE THQL1150 Type THQL Q-Line Standard Circuit Breaker
Copper-to-copper connections, calibrated for optimum trip performance, heat resistant thermoset cases and covers, cemented calibration screw. Type THQL - 1" per pole. May be used, when marked to accept, with American Switch, Arrow Hart, Bryant, General Switch, GTE, Sylvania, most ITE, Murray, Westinghouse Type BR, Challenger and Crouse-Hinds. 15 to 30 amp 14 - 8 Cu or 12 - 8 Al AWG wire, 35 to 60 amp 8 - 3 Cu or 8 - 2 Al AWG wire. UL Listed, HACR rated. 1" module, 120/240 volt; 10,000 AIR. Copper-to-copper connections, calibrated for optimum trip performance, heat resistant thermoset cases and covers, cemented calibration screw. Type THQL - 1" per pole. May be used, when marked to accept, with American Switch, Arrow Hart, Bryant, General Switch, GTE, Sylvania, most ITE, Murray, Westinghouse Type BR, Challenger and Crouse-Hinds. 15 to 30 amp 14 - 8 Cu or 12 - 8 Al AWG wire, 35 to 60 amp 8 - 3 Cu or 8 - 2 Al AWG wire. UL Listed, HACR rated. 1" module, 120/240 volt; 10,000 AIR. Copper-to-copper connections, calibrated for optimum trip performance, heat resistant thermoset cases and covers, cemented calibration screw. Type THQL - 1" per pole. May be used, when marked to accept, with American Switch, Arrow Hart, Bryant, General Switch, GTE, Sylvania, most ITE, Murray, Westinghouse Type BR, Challenger and Crouse-Hinds. 15 to 30 amp 14 - 8 Cu or 12 - 8 Al AWG wire, 35 to 60 amp 8 - 3 Cu or 8 - 2 Al AWG wire. UL Listed, HACR rated. 1" module, 120/240 volt; 10,000 AIR.
GE THQL1115 Type THQL Q-Line Standard Circuit Breaker GE THQP150 Type THQP Q-Line Standard Circuit Breaker GE THQP140 Type THQP Q-Line Standard Circuit Breaker
Copper-to-copper connections, calibrated for optimum trip performance, heat resistant thermoset cases and covers, cemented calibration screw. Type THQL - 1" per pole. May be used, when marked to accept, with American Switch, Arrow Hart, Bryant, General Switch, GTE, Sylvania, most ITE, Murray, Westinghouse Type BR, Challenger and Crouse-Hinds. 15 to 30 amp 14 - 8 Cu or 12 - 8 Al AWG wire, 35 to 60 amp 8 - 3 Cu or 8 - 2 Al AWG wire. UL Listed, HACR rated. 1" module, 120/240 volt; 10,000 AIR. Copper-to-copper connections, calibrated for optimum trip performance, heat resistant thermoset cases and covers, cemented calibration screw. Nearly identical to Type THQL with the same design and performance, yet only taking up 1/2 the space,  1/2" per pole. UL Listed, HACR rated. 15 and 20 amp SWD, switching duty rated, suitable for 120 volt fluorescent lighting loads. 15 to 25 amp #14 - 8 Cu or #12 - 8 Al AWG wire, 30 to 50 amp #8 - 4 Cu or #8 - 2 Al AWG wire. 3-9/32" height x 1/2" width x 2-3/8" depth. 120/240 volt; 10,000 AIR. Copper-to-copper connections, calibrated for optimum trip performance, heat resistant thermoset cases and covers, cemented calibration screw. Nearly identical to Type THQL with the same design and performance, yet only taking up 1/2 the space,  1/2" per pole. UL Listed, HACR rated. 15 and 20 amp SWD, switching duty rated, suitable for 120 volt fluorescent lighting loads. 15 to 25 amp #14 - 8 Cu or #12 - 8 Al AWG wire, 30 to 50 amp #8 - 4 Cu or #8 - 2 Al AWG wire. 3-9/32" height x 1/2" width x 2-3/8" depth. 120/240 volt; 10,000 AIR.
GE THQP130 Type THQP Q-Line Standard Circuit Breaker GE THQP120 Type THQP Q-Line Standard Circuit Breaker GE THQP115 Type THQP Q-Line Standard Circuit Breaker
Copper-to-copper connections, calibrated for optimum trip performance, heat resistant thermoset cases and covers, cemented calibration screw. Nearly identical to Type THQL with the same design and performance, yet only taking up 1/2 the space,  1/2" per pole. UL Listed, HACR rated. 15 and 20 amp SWD, switching duty rated, suitable for 120 volt fluorescent lighting loads. 15 to 25 amp #14 - 8 Cu or #12 - 8 Al AWG wire, 30 to 50 amp #8 - 4 Cu or #8 - 2 Al AWG wire. 3-9/32" height x 1/2" width x 2-3/8" depth. 120/240 volt; 10,000 AIR. Copper-to-copper connections, calibrated for optimum trip performance, heat resistant thermoset cases and covers, cemented calibration screw. Nearly identical to Type THQL with the same design and performance, yet only taking up 1/2 the space,  1/2" per pole. UL Listed, HACR rated. 15 and 20 amp SWD, switching duty rated, suitable for 120 volt fluorescent lighting loads. 15 to 25 amp #14 - 8 Cu or #12 - 8 Al AWG wire, 30 to 50 amp #8 - 4 Cu or #8 - 2 Al AWG wire. 3-9/32" height x 1/2" width x 2-3/8" depth. 120/240 volt; 10,000 AIR. Copper-to-copper connections, calibrated for optimum trip performance, heat resistant thermoset cases and covers, cemented calibration screw. Nearly identical to Type THQL with the same design and performance, yet only taking up 1/2 the space,  1/2" per pole. UL Listed, HACR rated. 15 and 20 amp SWD, switching duty rated, suitable for 120 volt fluorescent lighting loads. 15 to 25 amp #14 - 8 Cu or #12 - 8 Al AWG wire, 30 to 50 amp #8 - 4 Cu or #8 - 2 Al AWG wire. 3-9/32" height x 1/2" width x 2-3/8" depth. 120/240 volt; 10,000 AIR.
Gardner Bender GSW Economy Rocker Switch Eaton BR115 Type BR Miniature Circuit Breaker HomeLine HOM115C Miniature Standard Circuit Breaker
Fits standard .550" X 1.125" panel cutouts. Economy spade terminal type. Designed for machinery or appliances. Switching duty rating. Thermal magnetic 40 degrees C. Interchangeable, will replace: Bryant, Westinghouse and Challenger. Type BR. 120/240 volt, 10,000 AIR. 1" per pole. Single-pole 1" circuit breaker features 10,000 AIR and 120/240 VAC. Uses a thermal-magnetic tripping mechanism for overload and short-circuit protection. Compatible with Homeline load centers and CSED devices. ANSI certified and UL Listed.
HomeLine HOM130C Miniature Standard Circuit Breaker HomeLine HOM120C Miniature Standard Circuit Breaker Eaton BR130 Type BR Miniature Circuit Breaker
Single-pole 1" circuit breaker features 10,000 AIR and 120/240 VAC. Uses a thermal-magnetic tripping mechanism for overload and short-circuit protection. Compatible with Homeline load centers and CSED devices. ANSI certified and UL Listed. Single-pole 1" circuit breaker features 10,000 AIR and 120/240 VAC. Uses a thermal-magnetic tripping mechanism for overload and short-circuit protection. Compatible with Homeline load centers and CSED devices. ANSI certified and UL Listed. Switching duty rating. Thermal magnetic 40 degrees C. Interchangeable, will replace: Bryant, Westinghouse and Challenger. Type BR. 120/240 volt, 10,000 AIR. 1" per pole.
Carlon E990DER-CAR Pull Elbow With Reducer Bushing Eaton BR140 Type BR Miniature Circuit Breaker Eaton BR150 Type BR Miniature Circuit Breaker
Access pull point for cable in tight radius. Allows conduit changes in direction. Won't rust or corrode. Gasket included. Switching duty rating. Thermal magnetic 40 degrees C. Interchangeable, will replace: Bryant, Westinghouse and Challenger. Type BR. 120/240 volt, 10,000 AIR. 1" per pole. Switching duty rating. Thermal magnetic 40 degrees C. Interchangeable, will replace: Bryant, Westinghouse and Challenger. Type BR. 120/240 volt, 10,000 AIR. 1" per pole.
GB-Gardner Bender GSW-25 Canopy Switches Eaton BR120 Type BR Miniature Circuit Breaker Gardner Bender GSW-69 Rotary Switch
Maintained contact switch family utilized in applications requiring continuous continuity contacts. Number 18 AWG, 6" stripped wire leads. Mounting nut included. Switching duty rating. Thermal magnetic 40 degrees C. Interchangeable, will replace: Bryant, Westinghouse and Challenger. Type BR. 120/240 volt, 10,000 AIR. 1" per pole. Black plastic, .516",  brass terminals, #18 AWG, 6" stripped wire leads.
Jandorf 61224 Single Circuit Push Button Switch Jandorf 61216 Single Circuit Rotary Switch Jandorf 61217 Single Circuit Rotary Switch
Jandorf Push Button Switch, Single Circuit, Series: 61224, 125 V, 1 A, 1 Poles, Contact Configuration: SPST, On/Off, 2-Wire Terminal, Brass, UL Listed, Brass Canopy Jandorf Rotary Switch, Single Circuit, Series: 61216, 125 V, 1 A, Contact Configuration: SPST, On/Off, 1 Poles, 2-Wire Terminal, Black Hat Canopy, UL Listed Jandorf Rotary Switch, Single Circuit, Series: 61217, 125 V, 1 A, Contact Configuration: SPST, On/Off, 1 Poles, 2-Wire Terminal, White Hat Canopy, UL Listed
Gardner Bender GSW-62 Rotary Switch GB-Gardner Bender GSW-22 Momentary Switches Carlon UAFAD Flexible Conduit Elbow
Brass terminals, #18 AWG, 6" stripped wire leads. .406" mounting hole. CSA Listed. Basic pushbutton screw type terminal switch family utilized in applications requiring intermittent continuity contacts. Mounts in standard 1/2" diameter hole. Mounting nut included. () Indicates momentary action. Made of a highly durable plastic (PVC) compound making the product nonmetallic and safe to install. Elbow is non-corrosive, rustproof, and easily pliable. Good for those applications that requires change of direction. UL listed.
Jandorf 61023 Slide Switch Plumb Pak PP825-20 Adjustable Shower Rod Flange Carlon E983GR-CAR Rigid IMC Conduit Body
Jandorf Slide Switch, 2-Position, 125 V, 3 A, 1 Poles, Contact Configuration: SPST, On-Off, 2 Tab Terminal, Standards: UL Listed Adjustable tension holder for 1" OD rods. No screws, no need to  drill wall tile. Holds rod firmly in place. For easy access and pulling of wires through conduit run. For use with Schedule 40/80 non-metallic solvent weld fittings. Will not rust or corrode.
Thomas & Betts E986HR Type LB Rigid/IMC Conduit Body Jandorf 61220 Single Circuit Rotary Switch GB-Gardner Bender GSW-21 Canopy Switches
Rigid non-metallic Type LB conduit body. For easy access and pulling of wires through conduit run. For use with Schedule 40 non-metallic solvent weld fittings. Will not rust or corrode. With textured lid and foam-in-place gasket. Hubs are not threaded. UL Listed, RoHS Compliance. Jandorf Rotary Switch, Single Circuit, Series: 61220, 125 V, 1 A, Contact Configuration: SPST, On/Off, 1 Poles, 2-Wire Terminal, Brass Knob, UL Listed Maintained pushbutton switch. Push On-Push Off. #18 AWG, 6' stripped wire leads. Mounting nut included.
Gardner Bender GSW-23 Push Button Switch Jandorf 61215 3-Way Double Circuit Rotary Switch Jandorf 61021 Momentary Switch
Basic pushbutton screw type terminal switch family utilized in applications requiring intermittent continuity contacts. Mounts in standard 1/2" diameter hole. Mounting nut included. () Indicates momentary action. Jandorf Rotary Switch, 3-Way Double Circuit, Series: 61215, 125 V, 3 A, Off/On/On/On, 2 Poles, 4 Positions, 3-Wire Terminal, Brass Knob, UL Listed Jandorf Slide Switch, 2-Position, 125 V, 3 A, 1 Poles, Contact Configuration: SPDT, ON/ON, 3 Tab Terminal, Standards: UL Listed
Eaton CL115 Type CL Circuit Breaker Eaton CL130 Type CL Circuit Breaker Eaton CL120 Type CL Circuit Breaker
Wire size range #14-4. Type CL replacement breakers, classified as direct replacements by Underwriters Laboratories for Square D HOMELINE, General Electric, Crouse-Hinds, Thomas & Betts, Murray and ITE/Siemens loadcenters. 120/240 volt AC, 10,000 AIC. Requires one 1-Inch (25.4 mm) space. Wire size range #14-4. Type CL replacement breakers, classified as direct replacements by Underwriters Laboratories for Square D HOMELINE, General Electric, Crouse-Hinds, Thomas & Betts, Murray and ITE/Siemens loadcenters. 120/240 volt AC, 10,000 AIC. Requires one 1-Inch (25.4 mm) space. Wire size range #14-4. Type CL replacement breakers, classified as direct replacements by Underwriters Laboratories for Square D HOMELINE, General Electric, Crouse-Hinds, Thomas & Betts, Murray and ITE/Siemens loadcenters. 120/240 volt AC, 10,000 AIC. Requires one 1-Inch (25.4 mm) space.
Carlon UB9AH-CAR Standard Radius Conduit Elbow Jandorf 61022 Slide Switch Gardner Bender GSW Economy Lighted Rocker Switch
For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant. Jandorf Slide Switch, 2-Position, 125 V, 3 A, 1 Poles, Contact Configuration: SPDT, On-Off, 3 Tab Terminal, Standards: UL Listed Fits standard .550" X 1.125" panel cutouts. Economy spade terminal type. Designed for machinery or appliances.
Jandorf 61020 Slide Switch Carlon UAFAE Flexible Conduit Elbow Carlon UA9AK-CAR Standard Radius Conduit Elbow
Jandorf Slide Switch, 2-Position, 125 V, 3 A, 2 Poles, Contact Configuration: DPDT, ON/ON, 6 Tab Terminal, Standards: UL Listed Made of a highly durable plastic (PVC) compound making the product nonmetallic and safe to install. Elbow is non-corrosive, rustproof, and easily pliable. Good for those applications that requires change of direction. UL listed. For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant.
SWITCH ROCKER SPST 20A ON/OFF Gardner Bender GSW Lighted Standard Rocker Switch Carlon E987G-CAR Rigid Conduit Body
Heavy-duty spade type terminal. Fits .830" x 1.45" panel cut-outs. Heavy-duty spade type terminal. Fits .830" x 1.45" panel cut-outs. For easy access and pulling of wires through conduit run. For use with Schedule 40/80 non-metallic solvent weld fittings. Will not rust or corrode. UL Listed.
Carlon E970CD-CTN Rigid Round Conduit Body with Cover Carlon E987H-CAR Rigid Conduit Body SWITCH LGT ROCK RND SPST O/F
Four knock-out type socket openings, 90 degree spacing. Includes separate mounting feet, cover and gasket. Non-conductive. Will not rust or corrode. For easy access and pulling of wires through conduit run. For use with Schedule 40/80 non-metallic solvent weld fittings. Will not rust or corrode. UL Listed. Square rocker, fits round hole. On-off. 1.1 x 1.1 x 0.9 inches.
Jandorf 61028 Plunger Single Circuit Push Button Switch Carlon E970CE-CTN Rigid Round Conduit Body with Cover SWITCH LGT ROCK SQ SPST O/F
Jandorf Push Button Switch, Plunger Single Circuit, Series: 61028, 125 V, 2 A, 1 Poles, Contact Configuration: SPST, Normally OFF, Momentary Snap Operation, Round Shape, 2-Tab Terminal, UL Listed Four knock-out type socket openings, 90 degree spacing. Includes separate mounting feet, cover and gasket. Non-conductive. Will not rust or corrode. Square rocker, fits round hole. On-off. 1.1 x 1.1 x 0.9 inches.
SWITCH LGT ROCK MINI SPST O/F Carlon E983H-CAR Rigid IMC Conduit Body Cooper 541B-BOX Toggle Switch
Miniature rocker switch that fits .520" X .776" panel cutouts. Lighted. CSA Listed. For easy access and pulling of wires through conduit run. For use with Schedule 40/80 non-metallic solvent weld fittings. Will not rust or corrode. For pole barns.
Jandorf 61212 Single Circuit Push Button Switch Carlon UB9AJ-CAR Standard Radius Conduit Elbow Plumb Pak 1845ALLFBX Shower Curtain Rod
Jandorf Push Button Switch, Single Circuit, Series: 61212, 125 V, 3 A, 1 Poles, Contact Configuration: SPST, On/Off, NIC Operation, 2-Wire Terminal, Nickel Plated, UL Listed For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant. Plumb Pak Shower Curtain Rod, 5 ft Length X 1 in Width, Aluminum, Gray
Area Lighting CPGI-ALR-ACL-11 Photocontrol Thomas & Betts E970CDE-CTN Rigid/Non-Metallic Junction Box Jandorf 61306 Double Circuit Push Button Switch
Converts manually operated interior table lamps to dusk-to-dawn lighting. Plug the control into any interior 120 volt outlet. For incandescent loads only. Four knock-out type socket openings, 90 degree spacing. Includes separate mounting feet, cover and gasket. Non-conductive. Will not rust or corrode. Jandorf Push Button Switch, Double Circuit, Series: 61306, 120 V, 3 A, 1 Poles, Contact Configuration: SPST, Normally Off, Momentary Operation, 2-Screw Terminal, UL Listed, Black Canopy
Carlon UA7AKB-CAR Standard Radius Conduit Elbow AmerTac SLC4CB-4 Dusk to Dawn Light Control Socket AmerTac SLC4CG Self-Tightening Dusk to Dawn Light Control
For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant. UL Listed E35297. Indoor/outdoor dusk to dawn light control for incandescent bulbs. Fixed light shutter. 150 watts maximum. Plastic housing. Screw-in connection. 2.2" x 1.5" x 1.5". AmerTac Dusk to Dawn Light Control, Self-Tightening, 150 W, Screw-In Connection, 2.2 in Overall Height, 1-1/2 in Overall Width, 1-1/2 in Overall Depth, Plastic, Gray, UL Listed, Number of Lights Controllable: 1, For Indoor/Outdoor Applications
Area Lighting CPGI-ALR-PL-120S- Photocontrol Jandorf 61029 Plunger Single Circuit Push Button Switch Homebasix SD-SR36-W3L Shower Curtain Rods
Designed for indoor or outdoor use and has a small profile that fits into most table lamps or outdoor post lanterns. 120 volt with a range of  105-130 volts, 150 watt tungsten load rating. Jandorf Push Button Switch, Plunger Single Circuit, Series: 61029, 125 V, 0.75 A, 1 Poles, Contact Configuration: SPST, Normally On, Momentary Operation, Round Shape, 2-Tab Terminal, UL Listed Heavy duty rod.
Jandorf 61221 Single Circuit Push Button Switch Jandorf 61214 3-Way Double Circuit Rotary Switch Jandorf 61005 Single Circuit Rotary Switch
Jandorf Push Button Switch, Single Circuit, Series: 61221, 125 V, 1.5 A, 1 Poles, Contact Configuration: SPST, Normally Off, Momentary Operation, 2-Wire Terminal, UL Listed, For Industrial Controlling Circuits Jandorf Rotary Switch, 3-Way Double Circuit, Series: 61214, 125 V, 3 A, Off/On/On/On, 2 Poles, 4 Positions, 3-Wire Terminal, Brass Knob, UL Listed Jandorf Rotary Switch, Single Circuit, Series: 61005, 125 V, 6.5 A, Contact Configuration: TPST, Off/On/On/On, 1 Poles, 5-Tab Terminal, Black, UL Listed
Plumb Pak 1847ALLFBX Shower Curtain Rod Homebasix SD-SR36-C3L Shower Curtain Rods Thomas & Betts E986J-CTN Type LB Rigid/IMC Conduit Body
Plumb Pak Shower Curtain Rod, 6 ft Length X 1 in Width, Aluminum, Gray Heavy duty rod. Rigid non-metallic Type LB conduit body. For easy access and pulling of wires through conduit run. For use with Schedule 40 non-metallic solvent weld fittings. Will not rust or corrode. With textured lid and foam-in-place gasket. Hubs are not threaded. UL Listed, RoHS Compliance.
Carlon E950LJ-CAR Reducing Conduit Bushing Carlon E950KJ-CAR Reducing Conduit Bushing Jandorf 61124 Double Circuit Rocker Switch
For connecting different sizes of conduit. Socket both ends, for reducing male Schedule 40/80 conduit runs or fittings to female. Non-conductive. Will not rust or corrode. For connecting different sizes of conduit. Socket both ends, for reducing male Schedule 40/80 conduit runs or fittings to female. Non-conductive. Will not rust or corrode. Toggles On/Off.
AmerTac SLC5BCB-4 Dawn Light Control Area Lighting CPGI-ALR-PL-120S Photocontrol AmerTac SLC5BCW-4 Dusk to Dawn Light Control Socket
AmerTac Dawn Light Control, 150 W, Dusk On - Dawn OFF Timing Range, Screw-In Connection, 3 in Overall Height, 2.2 in Overall Width, 1.7 in Overall Depth, Plastic, Includes: Removable Lens Shield to Block Light Reflection, Reducing Blinking, For Outdoor/Indoor, Driveways, Entrances and Patio Lights Electrical components polycarbonate. Compact screw-in control for up to 150 watt incandescent, CFL, LED and halogen lamps. Outdoor/indoor dusk to dawn light control. Turns compact fluorescent, LED, halogen, and incandescent bulbs on at dusk, off at dawn. Includes removable lens shield to block light reflection, reducing blinking. 150 watts maximum. Plastic housing. Screw-in connection.
Jandorf 61006 Power Indicators Carlon UAFAF Conduit Elbow Jandorf 61032 Illuminated Single Circuit Rocker Switch
Rated 125 volt, .3 watt. Red lens. Made of a highly durable plastic (PVC) compound making the product nonmetallic and safe to install. Elbow is non-corrosive, rustproof, and easily pliable. Good for those applications that requires change of direction. UL listed. Toggles On/Off.
Jandorf 61104 Mini Single Circuit Rocker Switch Square D QO140CP Type QO Standard Circuit Breaker Square D QO150CP Type QO Standard Circuit Breaker
Toggles On/Off. Single-pole 3/4" circuit breaker provides overload and short circuit protection. Features a red Visi-Trip indicator to identify a tripped breaker. Accepts aluminum or copper conductors. Rated for 120/240Vac and at 10,000 Ampre Interrupting Rating (AIR). CSA approved to only install in Canadian Square D loadcentres. Single-pole 3/4" circuit breaker provides overload and short circuit protection. Features a red Visi-Trip indicator to identify a tripped breaker. Accepts aluminum or copper conductors. Rated for 120/240Vac and at 10,000 Ampre Interrupting Rating (AIR). CSA approved to only install in Canadian Square D loadcentres.
Square D QO115CP Type QO Standard Circuit Breaker Square D QO120CP Type QO Standard Circuit Breaker Square D QO130CP Type QO Standard Circuit Breaker
Single-pole 3/4" circuit breaker provides overload and short circuit protection. Features a red Visi-Trip indicator to identify a tripped breaker. Accepts aluminum or copper conductors. Rated for 120/240Vac and at 10,000 Ampre Interrupting Rating (AIR). CSA approved to only install in Canadian Square D loadcentres. Single-pole 3/4" circuit breaker provides overload and short circuit protection. Features a red Visi-Trip indicator to identify a tripped breaker. Accepts aluminum or copper conductors. Rated for 120/240Vac and at 10,000 Ampre Interrupting Rating (AIR). CSA approved to only install in Canadian Square D loadcentres. Single-pole 3/4" circuit breaker provides overload and short circuit protection. Features a red Visi-Trip indicator to identify a tripped breaker. Accepts aluminum or copper conductors. Rated for 120/240Vac and at 10,000 Ampre Interrupting Rating (AIR). CSA approved to only install in Canadian Square D loadcentres.
Square D QO115C Miniature Standard Circuit Breaker Square D QO120C Miniature Standard Circuit Breaker Carlon UA9AKB-CAR Standard Radius Conduit Elbow
Single-pole 3/4" circuit breaker provides overload and short circuit protection. Features a red Visi-Trip indicator to identify a tripped breaker. Accepts aluminum or copper conductors. Rated for 120/240Vac and at 10,000 Ampre Interrupting Rating (AIR). CSA approved to only install in Canadian Square D loadcentres. Single-pole 3/4" circuit breaker provides overload and short circuit protection. Features a red Visi-Trip indicator to identify a tripped breaker. Accepts aluminum or copper conductors. Rated for 120/240Vac and at 10,000 Ampre Interrupting Rating (AIR). CSA approved to only install in Canadian Square D loadcentres. For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant. Schedule 40. UL 651 Listed to the NEC by the ETL, UL Listed.
Jandorf 61004 Rotary Switch Arrow Hart TR274 Duplex Combination Switch/Receptacle Square D QO130C Miniature Standard Circuit Breaker
Jandorf Rotary Switch, Series: 61004, 125 V, 3 A, Contact Configuration: TPST, Off/L1/L2/L3, 3 Poles, 4-Push-In Terminal, Black, UL Listed, 3-Speed Shutter designed to prevent the insertion of foreign objects. Neon pilot light which is on when switch is on. Switch is horsepower rated for motor loads per UL 20. Thermoplastic toggle, top and backbody. Ultrasonic welding and integrated construction of the strap and body. Tri-combo screw heads. Backwire clamps on side terminals for installation of #12 and #14 AWG wire. Single pole - 15 amp switch, 2-pole, 3-wire tamper resistant receptacle. UL listed, NEMA 5-15. Single-pole 3/4" circuit breaker provides overload and short circuit protection. Features a red Visi-Trip indicator to identify a tripped breaker. Accepts aluminum or copper conductors. Rated for 120/240Vac and at 10,000 Ampre Interrupting Rating (AIR). CSA approved to only install in Canadian Square D loadcentres.
Jandorf 61213 Double Circuit Push Button Switch Jandorf 61204 Rotary Switch Jandorf 61125 Curvette Double Circuit Rocker Switch
Jandorf Push Button Switch, Double Circuit, Series: 61213, 125 V, 3 A, 1 Poles, 4 Positions, Contact Configuration: 3-Way, Off/On/On/On, 3-Wire Terminal, Brass, UL Listed, L1/L2/L1-2/Off, For Commercial and Industrial Jandorf Rotary Switch, Series: 61204, 125 V, 6.5 A, Contact Configuration: TPST, Off/L1/L2/L3, 3 Poles, 4-Wire Terminal, Black, UL Listed, 3-Speed Toggles On/Off.
Carlon UA7AK-CAR Standard Radius Conduit Elbow InterDesign Classico Over Tank Tissue Holder Jandorf 61038 Illuminated Single Circuit Rocker Switch
For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant. UL Listed E35297. Chrome finish. Increases bathroom storage options limited by pedestal sinks. Rust-resistant chrome. Over the tank design for installation in seconds. Dispenses one roll and stores a second roll. Toggles On/Off.
Jandorf 61036 Single Circuit Push Button Switch Jandorf 61123 Single Circuit Push Button Switch Mintcraft L752-26-03 Freedom
Jandorf Push Button Switch, Single Circuit, Series: 61036, 125 V, 5 A, 1 Poles, Contact Configuration: SPST, On/Off, 2-Wire Terminal, Nickel Plated, UL Listed Jandorf Push Button Switch, Single Circuit, Series: 61123, 125 V, 10 A, 1 Poles, Contact Configuration: SPST, Normally Off, Momentary Operation, 2-Screw Terminal, UL Listed Zinc alloy with roller. Bagged
Jandorf 61164 Double Circuit Rocker Switch AmerTac OLC5CFLBC-4 Dusk to Dawn Floodlight Control Photocell Jandorf 61169 Mini Single Circuit Rocker Switch
Toggles On/Off. Outdoor dusk to dawn floodlight light control for Halogen/CFL/LED bulbs. Long stem design fits inside most flood lights, spot lights or enclosed exterior fixtures. Turns compact fluorescent, LED, halogen and incandescent bulbs on at dusk, off at dawn. 150 watts maximum. Plastic housing, 4.3" x 3.35" x 3.35". Toggles On/Off.
Cooper TR274V Duplex Cooper TR274W Duplex RECEPTACLE/SWITCH COMBO LA