Home > PLUMBING > KITCHEN & BATH > BATHROOM HARDWARE > TOWEL RINGS
Sort By:
1
Halex 97521 Insulated Conduit Bushing Halex 97522 Insulated Conduit Bushing Halex 97525 Insulated Conduit Bushing
High impact thermoplastic. Flame retardant to 105 degrees C. Use with locknut to terminate threaded Rigid or IMC conduit to an outlet box. The rounded surface of the bushing prevents damage to wire insulation. Required by the NEC. UL Listed, CSA Approved. High impact thermoplastic. Flame retardant to 105 degrees C. Use with locknut to terminate threaded Rigid or IMC conduit to an outlet box. The rounded surface of the bushing prevents damage to wire insulation. Required by the NEC. UL Listed, CSA Approved. High impact thermoplastic. Flame retardant to 105 degrees C. Use with locknut to terminate threaded Rigid or IMC conduit to an outlet box. The rounded surface of the bushing prevents damage to wire insulation. Required by the NEC. UL Listed, CSA Approved.
Halex 96191 Rigid IMC Conduit Locknut Halex 97523 Insulated Conduit Bushing Halex 96071 Knock Out Seals
Steel with zinc plating. Indoor or outdoor applications. Use to secure Rigid or IMC conduit or various threaded fittings to a steel outlet box or other metal enclosure. High impact thermoplastic. Flame retardant to 105 degrees C. Use with locknut to terminate threaded Rigid or IMC conduit to an outlet box. The rounded surface of the bushing prevents damage to wire insulation. Required by the NEC. UL Listed, CSA Approved. Use to cover exposed knock-out holes in steel outlet boxes and other metal enclosures.
Halex 96072 Knock Out Seals Halex 96192 Rigid IMC Conduit Locknut Halex 26190 Conduit Locknut
Use to cover exposed knock-out holes in steel outlet boxes and other metal enclosures. Steel with zinc plating. Indoor or outdoor applications. Use to secure Rigid or IMC conduit or various threaded fittings to a steel outlet box or other metal enclosure. Halex Conduit Locknut, 1/2 in Nominal, Steel, Zinc Plated, CSA Certified, UL Listed, For use to secure rigid, imc conduit or various threaded fittings to a steel outlet box or other metal enclosure, indoor/outdoor
Halex 97524 Insulated Conduit Bushing Halex 96193 Rigid Conduit Locknut Halex 96194 Rigid IMC Conduit Locknut
High impact thermoplastic. Flame retardant to 105 degrees C. Use with locknut to terminate threaded Rigid or IMC conduit to an outlet box. The rounded surface of the bushing prevents damage to wire insulation. Required by the NEC. UL Listed, CSA Approved. Steel with zinc plating. Indoor or outdoor applications. Use to secure Rigid or IMC conduit or various threaded fittings to a steel outlet box or other metal enclosure. Steel with zinc plating. Indoor or outdoor applications. Use to secure Rigid or IMC conduit or various threaded fittings to a steel outlet box or other metal enclosure.
Halex 96195 Rigid Conduit Locknut WireGard 19-AWC Assortment Wire Connector Kit WireGard 19-001 Twist-On Wire Connector
Steel with zinc plating. Indoor or outdoor applications. Use to secure Rigid or IMC conduit or various threaded fittings to a steel outlet box or other metal enclosure. Tight, square-wire spring threads directly onto conductors for fast connections with no slip. Tightens without ratcheting, easily removed for repeat usage on same size combination or larger. Fluted shell surface permits a firm grip for easy finger-tight connections. Thermoplastic shell shields against environmental extremes. Flame-retardant properties resist heat distortion up to 221 degrees Fahrenheit. Superior flash-over protection. High-dielectric shell features deep skirt design to prevent exposure of bare wire. Buttress threads screw into wire insulation. For copper to copper connections only. Tight, square-wire spring threads directly onto conductors for fast connections with no slip. Tightens without ratcheting, easily removed for repeat usage on same size combination or larger. Fluted shell surface permits a firm grip for easy finger-tight connections. Thermoplastic shell shields against environmental extremes. Flame-retardant properties resist heat distortion up to 221 degrees Fahrenheit. Superior flash-over protection. High-dielectric shell features deep skirt design to prevent exposure of bare wire. Buttress threads screw into wire insulation. For copper to copper connections only.
WireGard 19-002 Twist-On Wire Connector WireGard 19-003 Twist-On Wire Connector WireGard 19-004 Twist-On Wire Connector
Tight, square-wire spring threads directly onto conductors for fast connections with no slip. Tightens without ratcheting, easily removed for repeat usage on same size combination or larger. Fluted shell surface permits a firm grip for easy finger-tight connections. Thermoplastic shell shields against environmental extremes. Flame-retardant properties resist heat distortion up to 221 degrees Fahrenheit. Superior flash-over protection. High-dielectric shell features deep skirt design to prevent exposure of bare wire. Buttress threads screw into wire insulation. For copper to copper connections only. Tight, square-wire spring threads directly onto conductors for fast connections with no slip. Tightens without ratcheting, easily removed for repeat usage on same size combination or larger. Fluted shell surface permits a firm grip for easy finger-tight connections. Thermoplastic shell shields against environmental extremes. Flame-retardant properties resist heat distortion up to 221 degrees Fahrenheit. Superior flash-over protection. High-dielectric shell features deep skirt design to prevent exposure of bare wire. Buttress threads screw into wire insulation. For copper to copper connections only. Tight, square-wire spring threads directly onto conductors for fast connections with no slip. Tightens without ratcheting, easily removed for repeat usage on same size combination or larger. Fluted shell surface permits a firm grip for easy finger-tight connections. Thermoplastic shell shields against environmental extremes. Flame-retardant properties resist heat distortion up to 221 degrees Fahrenheit. Superior flash-over protection. High-dielectric shell features deep skirt design to prevent exposure of bare wire. Buttress threads screw into wire insulation. For copper to copper connections only.
WireGard 19-006 Twist-On Wire Connector WingGard 19-084 Twist-On Wire Connector WingGard 19-086 Twist-On Wire Connector
Tight, square-wire spring threads directly onto conductors for fast connections with no slip. Tightens without ratcheting, easily removed for repeat usage on same size combination or larger. Fluted shell surface permits a firm grip for easy finger-tight connections. Thermoplastic shell shields against environmental extremes. Flame-retardant properties resist heat distortion up to 221 degrees Fahrenheit. Superior flash-over protection. High-dielectric shell features deep skirt design to prevent exposure of bare wire. Buttress threads screw into wire insulation. For copper to copper connections only. Easy-on, easy-off without tools. Wings are knurled for a surer grip and offset from the centerline for greater twisting leverage. Easily removed for repeat usage on same size combination or larger. Expandable square-wire plated spring instantly adjusts to the shape and size of the splice for a vibration-resistant connection. Tough thermoplastic shell shields against environmental extremes. Flame-retardant, non-porous and non-corrosive shell resists surface cracking and chemical action. Temperature rating: 221 degrees F. Superior flash-over protection. High-dielectric shell features deep skirt design to prevent exposure of bare wire. Buttress threads screw into wire insulation. Copper to copper connections only. cULus Listed. Easy-on, easy-off without tools. Wings are knurled for a surer grip and offset from the centerline for greater twisting leverage. Easily removed for repeat usage on same size combination or larger. Expandable square-wire plated spring instantly adjusts to the shape and size of the splice for a vibration-resistant connection. Tough thermoplastic shell shields against environmental extremes. Flame-retardant, non-porous and non-corrosive shell resists surface cracking and chemical action. Temperature rating: 221 degrees F. Superior flash-over protection. High-dielectric shell features deep skirt design to prevent exposure of bare wire. Buttress threads screw into wire insulation. Copper to copper connections only. cULus Listed.
Hex-Lok 19-2H2 Hex Lock Wire Connector WingGard 19-089 Twist-On Wire Connector GreenGard 19-095 Grounding Wire Connector
Easy-on, easy-off without tools. Wings are knurled for a surer grip and offset from the centerline for greater twisting leverage. Easily removed for repeat usage on same size combination or larger. Expandable square-wire plated spring instantly adjusts to the shape and size of the splice for a vibration-resistant connection. Tough thermoplastic shell shields against environmental extremes. Flame-retardant, non-porous and non-corrosive shell resists surface cracking and chemical action. Temperature rating: 221 degrees F. Superior flash-over protection. High-dielectric shell features deep skirt design to prevent exposure of bare wire. Buttress threads screw into wire insulation. Copper to copper connections only. cULus Listed. Easy-on, easy-off without tools. Wings are knurled for a surer grip and offset from the centerline for greater twisting leverage. Easily removed for repeat usage on same size combination or larger. Expandable square-wire plated spring instantly adjusts to the shape and size of the splice for a vibration-resistant connection. Tough thermoplastic shell shields against environmental extremes. Flame-retardant, non-porous and non-corrosive shell resists surface cracking and chemical action. Temperature rating: 221 degrees F. Superior flash-over protection. High-dielectric shell features deep skirt design to prevent exposure of bare wire. Buttress threads screw into wire insulation. Copper to copper connections only. cULus Listed. Specifically designed for making positive ground connections. Connectors feature the same live-action as WingGard connectors with the added plating protection for corrosion resistance in grounding applications. Contoured, offset wings enable firm ground connections with the twist of a hand. Flame retardant, themoplastic shell resists punctures, cuts, abrasion and corrosion. Connectors have a hole in the tip for ground wire. Solid copper to copper connections only. Nos. 15-095; 19-095 and 25-095: minimum 2 #14, maximum 4 #12 wire connections.
Halex 26071 Knock Out Seals Halex 97526 Insulated Conduit Bushing Cooper RKRD-W-BP Replacement Knob
Use to cover exposed knock-out holes in steel outlet boxes and other metal enclosures. High impact thermoplastic. Flame retardant to 105 degrees C. Use with locknut to terminate threaded Rigid or IMC conduit to an outlet box. The rounded surface of the bushing prevents damage to wire insulation. Required by the NEC. UL Listed, CSA Approved. CULus Listed, NOM certified.
Cooper RKRD-V-BP Replacement Knob Lutron Preset/Slide-to-Off Standard Replacement Knob Lutron Replacement Knob
CULus Listed, NOM certified. Replacement knob for Skylark dimmers. Replacement knob for Skylark dimmers.
Halex 96196 Rigid IMC Conduit Locknut Jandorf 61423 Cord Protector Jandorf 61424 Cord Protector
Steel with zinc plating. Indoor or outdoor applications. Use to secure Rigid or IMC conduit or various threaded fittings to a steel outlet box or other metal enclosure. Jandorf Cord Protector, Nylon, Black, UL Listed, For Indoor and Outdoor Use Jandorf Cord Protector, Nylon, Black, UL Listed, For Indoor and Outdoor Use
Jandorf 60935 Closed End Connector 22 - 18 AWG Calterm 73438 Heat Shrink Tubing Assortment Gardner Bender 20-410 Crimp Sleeve Connector
Jandorf Closed End Connector Series: 60935, 22 - 18 AWG Conductor, Fully Insulated Insulation, Vinyl Insulation, Clear, Tin Plated Copper, UL Listed Used to repair and cover torn wire insulation or to protect and insulate objects such as rope ends, plier handles or terminal connections. Wire identification by color. Shrinks up to half of its original diameter and is temperature rated to 221 degrees Fahrenheit and 600 volt maximum, Underwriters Recognized specification UL 224. Zinc plated steel.
Calterm 61470 Assortment Wire Cap Set Jandorf 61415 Cord Protector Jandorf 61416 Cord Protector
Suitable for solid or stranded copper wire. Jandorf Cord Protector, Nylon, Black, UL Listed, For Indoor and Outdoor Use Jandorf Cord Protector, Nylon, Black, UL Listed, For Indoor and Outdoor Use
WireGard 25-002 Twist-On Wire Connector Halex 75225 Insulated Conduit Bushing Jandorf 61417 Cord Protector
Tight, square-wire spring threads directly onto conductors for fast connections with no slip. Tightens without ratcheting, easily removed for repeat usage on same size combination or larger. Fluted shell surface permits a firm grip for easy finger-tight connections. Thermoplastic shell shields against environmental extremes. Flame-retardant properties resist heat distortion up to 221 degrees Fahrenheit. Superior flash-over protection. High-dielectric shell features deep skirt design to prevent exposure of bare wire. Buttress threads screw into wire insulation. For copper to copper connections only. High impact thermoplastic. Flame retardant to 105 degrees C. Use with locknut to terminate threaded Rigid or IMC conduit to an outlet box. The rounded surface of the bushing prevents damage to wire insulation. Required by the NEC. UL Listed, CSA Approved. Jandorf Cord Protector, Nylon, Black, UL Listed, For Indoor and Outdoor Use
WireGard 25-001 Twist-On Wire Connector Calterm 61606 Terminal Lug Halex 01925B IMC Conduit Locknut
Tight, square-wire spring threads directly onto conductors for fast connections with no slip. Tightens without ratcheting, easily removed for repeat usage on same size combination or larger. Fluted shell surface permits a firm grip for easy finger-tight connections. Thermoplastic shell shields against environmental extremes. Flame-retardant properties resist heat distortion up to 221 degrees Fahrenheit. Superior flash-over protection. High-dielectric shell features deep skirt design to prevent exposure of bare wire. Buttress threads screw into wire insulation. For copper to copper connections only. Dimensions: 3/8" stud x 2-3/8" length. Use to secure Rigid or IMC conduit or various threaded fittings to a steel outlet box or other metal enclosure. Bulk packed.
Hex-Lok 19-1H1 Hex Lock Wire Connector Lutron Electronics RK-WH Replacement Knobs Lutron RK-IV Standard Replacement Knob
Multi-range copper to copper connections only. Allows automatic or manual installation without stress whitening or distortion. Use 5/16" socket for H1. Square wire spring grabs and holds wires for secure connections. Long skirt covers stripped wires. Rated at 600 volt maximum and at 1000 volt maximum in lighting fixtures, luminaries and signs. Replacement knob for Rotary dimmers. Replacement knob for Rotary dimmers.
Jandorf 61422 Cord Protector Gardner Bender FLX-5007 Corrugated Spilt Flexible Tube Calterm 73457 Flexible Tube
Jandorf Cord Protector, Nylon, Black Protects hoses, wire and cables from cuts, abrasions and UV wear. Corrugated for added flexibility. Split down the center for wire breakout where needed. Black. Quickly installed over entire length of wire run. Excellent for under hood and trailer wiring.
Gardner Bender 20-411 Crimp Sleeve Connector WireGard 25-003 Twist-On Wire Connector Gardner Bender 20-089 Closed End Crimp Pigtail Connector
Crimp connectors for strong, vibration-resistant permanent connections in branch circuits and fixture wiring. UL Listed. Tight, square-wire spring threads directly onto conductors for fast connections with no slip. Tightens without ratcheting, easily removed for repeat usage on same size combination or larger. Fluted shell surface permits a firm grip for easy finger-tight connections. Thermoplastic shell shields against environmental extremes. Flame-retardant properties resist heat distortion up to 221 degrees Fahrenheit. Superior flash-over protection. High-dielectric shell features deep skirt design to prevent exposure of bare wire. Buttress threads screw into wire insulation. For copper to copper connections only. Tin-plated seamless copper closed-end crimp connector for use with solid or stranded wire. Vibration resistant, corrosion and chemical resistant. UL listed.
Gardner Bender 20-090 Closed End Crimp Pigtail Connector Gardner Bender GTA-2 Mechanical Lug Halex 75230 Insulated Conduit Bushing
Tin-plated seamless copper closed-end crimp connector for use with solid or stranded wire. Vibration resistant, corrosion and chemical resistant. UL listed. Single conductor, features high-strength, low-resistance aluminum construction. Accepts wire from number 14 to number 10 gauge AWG stranded, and number 14 to number 2 gauge AWG solid. UL Listed. Card of 2. High impact thermoplastic. Flame retardant to 105 degrees C. Use with locknut to terminate threaded Rigid or IMC conduit to an outlet box. The rounded surface of the bushing prevents damage to wire insulation. Required by the NEC. UL Listed, CSA Approved.
Calterm 73458 Flexible Tube GB-Gardner Bender HST-187R Heat Shrink Tubes GB-Gardner Bender HST-250R Heat Shrink Tubes
Quickly installed over entire length of wire run. Excellent for under hood and trailer wiring. For cable insulation, marking and bundling, with superior mechanical, abrasion and moisture protection. Flame retardant, meets UL 224 VW-1. Resists common fluids and solvents. 2:1 shrink ratio. 3 inches long. For cable insulation, marking and bundling, with superior mechanical, abrasion and moisture protection. Flame retardant, meets UL 224 VW-1. Resists common fluids and solvents. 2:1 shrink ratio. 3 inches long.
GB-Gardner Bender HST-375R Heat Shrink Tubes GB-Gardner Bender HST-500R Heat Shrink Tubes GB-Gardner Bender HST-187W Heat Shrink Tubes
For cable insulation, marking and bundling, with superior mechanical, abrasion and moisture protection. Flame retardant, meets UL 224 VW-1. Resists common fluids and solvents. 2:1 shrink ratio. 3 inches long. For cable insulation, marking and bundling, with superior mechanical, abrasion and moisture protection. Flame retardant, meets UL 224 VW-1. Resists common fluids and solvents. 2:1 shrink ratio. 3 inches long. For cable insulation, marking and bundling, with superior mechanical, abrasion and moisture protection. Flame retardant, meets UL 224 VW-1. Resists common fluids and solvents. 2:1 shrink ratio. 3 inches long.
GB-Gardner Bender HST-250W Heat Shrink Tubes GB-Gardner Bender HST-375W Heat Shrink Tubes GB-Gardner Bender HST-500W Heat Shrink Tubes
For cable insulation, marking and bundling, with superior mechanical, abrasion and moisture protection. Flame retardant, meets UL 224 VW-1. Resists common fluids and solvents. 2:1 shrink ratio. 3 inches long. For cable insulation, marking and bundling, with superior mechanical, abrasion and moisture protection. Flame retardant, meets UL 224 VW-1. Resists common fluids and solvents. 2:1 shrink ratio. 3 inches long. For cable insulation, marking and bundling, with superior mechanical, abrasion and moisture protection. Flame retardant, meets UL 224 VW-1. Resists common fluids and solvents. 2:1 shrink ratio. 3 inches long.
TUBING HEAT SHRINK 3IN        Jandorf 61414 Cord Protector GB-Gardner Bender HST-125W Heat Shrink Tubes
TUBING HEAT SHRINK 3IN
Our Price: $2.77
Ideal for cable insulation, marking and bundling, with superior mechanical, abrasion and moisture protection. Flame retardant, meets UL 224 VW-1. Resists common fluids and solvents. Material is Polyolefin. Meets UL 224, 125?C, CSA C22.2 No. 198.1, 125?C; MIL-DTL-23053/5, Class 1 & 1, AMS 3636 & 3637; DEF Stan 59-79, Issue 3 Type 2a. Continuous operating temperature: -40? (40?F) - 125?C (257?F). Shrink temperature: 125?C (257?F) - 250?C (480?F). 600 V/Mil Dielectric strength. 2:1 shrink ratio. Jandorf Cord Protector, Nylon, Black, UL Listed, For Indoor and Outdoor Use For cable insulation, marking and bundling, with superior mechanical, abrasion and moisture protection. Flame retardant, meets UL 224 VW-1. Resists common fluids and solvents. 2:1 shrink ratio. 3 inches long.
TUBING H SHRK 3/32-3/64X3 WHT Halex 26073 Knock Out Seals Jandorf 60820 Closed End Connector 12 - 10 AWG
For cable insulation, marking and bundling, with superior mechanical, abrasion and moisture protection. Flame retardant, meets UL 224 VW-1. Resists common fluids and solvents. 2:1 shrink ratio. 3 inches long. Use to cover exposed knock-out holes in steel outlet boxes and other metal enclosures. Jandorf Closed End Connector Series: 60820, 12 - 10 AWG Conductor, Insulated Insulation, Nylon Insulation, Clear, Tin Plated Copper, UL Listed
PushGard 19-PC2 2-Port Push-In Connector Calterm 61607 Terminal Lug Gardner Bender HST-750 Thin Wall Heat Shrink Tubing
Easy and fast, strip and push conductors into connectors to make reliable, secure connections. Simplified insertion and compact size helps in tight locations. Clear polycarbonate housings have color-coded side panels for connection verification and identification. Corrosion-resistant stainless steel springs restrict wire pullout, yet corrections are possible with a simple left-right twist and pull. Continuity test point for easy voltage checks. Rated at 600 volt maximum in building wire and at 1000 volt maximum in lighting fixtures and luminaries. Copper-to-copper connections only. Dimensions: 3/8" stud x 2-3/8" length. Tubing shrinks under heat application to insulate wiring up to half its diameter (finished). Also useful for repairing cords and covering tool handles. Flame retardant. Resists common fluids and solvents. Shrink temperature: 250 degrees F. 2 to 1 shrink ratio. 4" length. UL Listed, meets CSA requirements.
Gardner Bender FLX-3810 Corrugated Spilt Flexible Tube Gardner Bender HST-093 Thin Wall Heat Shrink Tubing Gardner Bender HST-125 Thin Wall Heat Shrink Tubing
Protects hoses, wire and cables from cuts, abrasions and UV wear. Corrugated for added flexibility. Split down the center for wire breakout where needed. Black. Tubing shrinks under heat application to insulate wiring up to half its diameter (finished). Also useful for repairing cords and covering tool handles. Flame retardant. Resists common fluids and solvents. Shrink temperature: 250 degrees F. 2 to 1 shrink ratio. 4" length. UL Listed, meets CSA requirements. Tubing shrinks under heat application to insulate wiring up to half its diameter (finished). Also useful for repairing cords and covering tool handles. Flame retardant. Resists common fluids and solvents. Shrink temperature: 250 degrees F. 2 to 1 shrink ratio. 4" length. UL Listed, meets CSA requirements.
Gardner Bender HST-187 Thin Wall Heat Shrink Tubing Gardner Bender HST-250 Thin Wall Heat Shrink Tubing Gardner Bender HST-375 Thin Wall Heat Shrink Tubing
Tubing shrinks under heat application to insulate wiring up to half its diameter (finished). Also useful for repairing cords and covering tool handles. Flame retardant. Resists common fluids and solvents. Shrink temperature: 250 degrees F. 2 to 1 shrink ratio. 4" length. UL Listed, meets CSA requirements. Tubing shrinks under heat application to insulate wiring up to half its diameter (finished). Also useful for repairing cords and covering tool handles. Flame retardant. Resists common fluids and solvents. Shrink temperature: 250 degrees F. 2 to 1 shrink ratio. 4" length. UL Listed, meets CSA requirements. Tubing shrinks under heat application to insulate wiring up to half its diameter (finished). Also useful for repairing cords and covering tool handles. Flame retardant. Resists common fluids and solvents. Shrink temperature: 250 degrees F. 2 to 1 shrink ratio. 4" length. UL Listed, meets CSA requirements.
Gardner Bender HST-500 Thin Wall Heat Shrink Tubing Gardner Bender HST-999 Thin Wall Heat Shrink Tubing Gardner Bender HST-AST Thin Wall Heat Shrink Tubing Assortment
Tubing shrinks under heat application to insulate wiring up to half its diameter (finished). Also useful for repairing cords and covering tool handles. Flame retardant. Resists common fluids and solvents. Shrink temperature: 250 degrees F. 2 to 1 shrink ratio. 4" length. UL Listed, meets CSA requirements. Tubing shrinks under heat application to insulate wiring up to half its diameter (finished). Also useful for repairing cords and covering tool handles. Flame retardant. Resists common fluids and solvents. Shrink temperature: 250 degrees F. 2 to 1 shrink ratio. 4" length. UL Listed, meets CSA requirements. Used to repair and cover torn wire insulation or to protect and insulate objects. Includes total of 8 pieces in sizes of 1/8", 3/16" and 1/4" inside diameter before shrinking.
PushGard 19-PC3 3-Port Push-In Connector Halex 64405 Conduit Elbow WingGard 25-084 Twist-On Wire Connector
Easy and fast, strip and push conductors into connectors to make reliable, secure connections. Simplified insertion and compact size helps in tight locations. Clear polycarbonate housings have color-coded side panels for connection verification and identification. Corrosion-resistant stainless steel springs restrict wire pullout, yet corrections are possible with a simple left-right twist and pull. Continuity test point for easy voltage checks. Rated at 600 volt maximum in building wire and at 1000 volt maximum in lighting fixtures and luminaries. Copper-to-copper connections only. To connect EMT conduit together to allow for 90 degree bends. UL Approved. Easy-on, easy-off without tools. Wings are knurled for a surer grip and offset from the centerline for greater twisting leverage. Easily removed for repeat usage on same size combination or larger. Expandable square-wire plated spring instantly adjusts to the shape and size of the splice for a vibration-resistant connection. Tough thermoplastic shell shields against environmental extremes. Flame-retardant, non-porous and non-corrosive shell resists surface cracking and chemical action. Temperature rating: 221 degrees F. Superior flash-over protection. High-dielectric shell features deep skirt design to prevent exposure of bare wire. Buttress threads screw into wire insulation. Copper to copper connections only. cULus Listed.
PushGard 19-PC4 4-Port Push-In Connector WireGard 25-004 Twist-On Wire Connector LOCK NUT SEALER 1/2IN
LOCK NUT SEALER 1/2IN
Our Price: $3.36
Easy and fast, strip and push conductors into connectors to make reliable, secure connections. Simplified insertion and compact size helps in tight locations. Clear polycarbonate housings have color-coded side panels for connection verification and identification. Corrosion-resistant stainless steel springs restrict wire pullout, yet corrections are possible with a simple left-right twist and pull. Continuity test point for easy voltage checks. Rated at 600 volt maximum in building wire and at 1000 volt maximum in lighting fixtures and luminaries. Copper-to-copper connections only. Tight, square-wire spring threads directly onto conductors for fast connections with no slip. Tightens without ratcheting, easily removed for repeat usage on same size combination or larger. Fluted shell surface permits a firm grip for easy finger-tight connections. Thermoplastic shell shields against environmental extremes. Flame-retardant properties resist heat distortion up to 221 degrees Fahrenheit. Superior flash-over protection. High-dielectric shell features deep skirt design to prevent exposure of bare wire. Buttress threads screw into wire insulation. For copper to copper connections only. Secures rigid or IMC conduit, or threaded fittings to steel outlet boxes or other steel boxes where moisture proofing is needed. Steel with zinc plating, pre-molded seal on one side.
Gardner Bender GSLU-35 Single Hole Mechanical Lug Halex 26074 Knock Out Seals Gardner Bender 73421 Spiral Wrap
Rated for 600 volt copper only. Single hole lugs, easy to install with screwdriver, wrench or pliers. 3/8" bolt size. Use to cover exposed knock-out holes in steel outlet boxes and other metal enclosures. Spiral wrap cord organizer, up to 3-1/2' or 6 cords for computers, stereos and home theaters. 3/8" x 3-1/2' of black spiral wrap. Carded.
Gardner Bender TK-32 Assortment Wire Connector Kit Cooper 410W Feed-Through Cord Switch Cooper 410B Feed-Through Cord Switch
Slide card kit with 32 assorted wire connectors: 10 GB #1 - minimum 3 #22 maximum 2 #16, 8 GB #2 - minimum 3 #22 maximum 3 #18 w/2 #20 6 GB #3 - minimum 3 #20 maximum 2 #14, 2 GB #4 - minimum 1 #14 maximum 4 #12, 4 crimp connector #1035 - 1 #20 w/1 #12 - 2 #14, 2 crimp connector #1034 - 4 #22 - 2 #16. In-line ON/OFF switch. Insulation displacement terminals eliminate need for stripping insulation from cord conductors. Meets all UL 20 requirements. 6 amp/125 volt AC; 3 amp/250 volt AC; 3 amp/125  volt AC "T". For #18 SPT-1. In-line ON/OFF switch. Insulation displacement terminals eliminate need for stripping insulation from cord conductors. Meets all UL 20 requirements. 6 amp/125 volt AC; 3 amp/250 volt AC; 3 amp/125  volt AC "T". For #18 SPT-1.
Cooper 410 Feed-Through General Duty Cord Switch GB-Gardner Bender FSP-AST2 Spiral Wrap Cooper 735B-BOX Toggle Switch
In-line ON/OFF switch. Insulation displacement terminals eliminate need for stripping insulation from cord conductors. Meets all UL 20 requirements. 6 amp/125 volt AC; 3 amp/250 volt AC; 3 amp/125  volt AC "T". For #18 SPT-1. Manages wire and cable neatly and allows for cable to break out at desired locations. Made from flexible polyethylene. Protects cables from cuts, abrasions and UV wear. Set of 2 in each package. Surface mount, side wire, feed-through heavy duty plastic construction switch for SPT cord, 10 Amp-125 Volt,  5 Amp-250 Volt.
Jandorf 88920 In-Line Switch Calterm 73461 Flexible Tube WingGard 25-086 Twist-On Wire Connector
ON/OFF switch. CSA Listed. Quickly installed over entire length of wire run. Excellent for under hood and trailer wiring. Easy-on, easy-off without tools. Wings are knurled for a surer grip and offset from the centerline for greater twisting leverage. Easily removed for repeat usage on same size combination or larger. Expandable square-wire plated spring instantly adjusts to the shape and size of the splice for a vibration-resistant connection. Tough thermoplastic shell shields against environmental extremes. Flame-retardant, non-porous and non-corrosive shell resists surface cracking and chemical action. Temperature rating: 221 degrees F. Superior flash-over protection. High-dielectric shell features deep skirt design to prevent exposure of bare wire. Buttress threads screw into wire insulation. Copper to copper connections only. cULus Listed.
Jandorf 60180 In-Line Switch Halex 26075 Knock Out Seals LUG CU HD 6AWG 5/16IN STUD SZ
ON/OFF switch. CSA Listed. Use to cover exposed knock-out holes in steel outlet boxes and other metal enclosures. Heavy-duty lugs made from pure copper for maximum current flow. Tinned for corrosion resistance. Seamless barrel for maximum strength. Closed ends seal out moisture.
LUG CU HD 6AWG 3/8IN STUD SZ  DryConn 20101 Low Voltage Wire Connector DryConn 62210 Safety Sealed Waterproof Wire Connector
Heavy-duty lugs made from pure copper for maximum current flow. Tinned for corrosion resistance. Seamless barrel for maximum strength. Closed ends seal out moisture. Suitable for all low voltage applications. For use in lighting, irrigation, and underground wiring. No junction box required. Filled with petroleum based sealant. 30 volt/10 amps maximum. 13/16" x 19/16". Suitable for all wire splices, especially those exposed to condensation, water vapors or dust. UL Listed.
DryConn 62110 Safety Sealed Waterproof Wire Connector DryConn 62310 Safety Sealed Waterproof Wire Connector Halex 64505 Conduit Elbow
Suitable for all wire splices, especially those exposed to condensation, water vapors or dust. UL Listed. Suitable for all wire splices, especially those exposed to condensation, water vapors or dust. UL Listed. To connect EMT conduit together to allow for 45 degree bends.
Halex 64507 Conduit Elbow Cooper BP458NP-SP Canopy Switch With Bell End Mintcraft CP-323L Wire Cap Set
To connect EMT conduit together to allow for 45 degree bends. UL Listed, (file no.E18704). Meets all CSA requirements, C22.2 no.111. For use in fixtures, appliances, and equipment. Shank is threaded 15/32" - 32 x 15/32" long. Keyed shank, hex nut and finishing nut furnished. 6 wire lead terminals, number 18, stripped 3/4". With end bell. Thirty two piece, for AWG #24 to AWG #10 solid or standard copper wire. Contains: 10 pc wire joint 22-16  300 volt, 2/#22 - 2/#16. 8 piece wire joint 22-14 300 volt 3/#22 - 3/#16. 6 pc wire joint 22-14 600 volt 2/#18 - 4/#16. 2 piece wire joint 18-12 600 volt 1/#18 + #14 - 1 and 2/#14 + 3/#16. 4 piece closed end pigtail 16-14 2/#22 - 2/#14. 2 piece closed end pigtail 12-10 2/#18 - 2/#10.
CONNCTOR WIRE IND/OTD AQUA/ORG CONNCTOR WIRE IND/OTD AQUA/RED Halex 61820B IMC Sealer Locknut
Aqua/Orange. No. 12 to No. 22 awg wire range, 600/1000 volts. Suitable for all wire splices, especially those exposed to condensation, water vapors or dust. UL listed. Aqua/Blue. No 8 to No. 22 awg wire range, 600/1000 volts. Suitable for all wire splices, especially those exposed to condensation, water vapors or dust. UL listed. Secures rigid or IMC conduit, or threaded fittings to steel outlet boxes or other steel boxes where moisture proofing is needed. Steel with zinc plating, pre-molded seal on one side.
Gardner Bender GSLU-25 Single Hole Mechanical Lug DryConn 10600 Twist-On Underground Wire Connector WireGard 25-AWC Assortment Wire Connector Kit
Rated for 600 volt copper only. Single hole lugs, easy to install with screwdriver, wrench or pliers. 3/8" bolt size. Rated for all underground direct bury applications. Use on all lighting, irrigation, and underground wiring. Additional sealant for long term service. No junction box needed. 600 volt maximum with building wire, 1000 volt in fixtures and signs. #8 to #22 wire range. UL Listed. Tight, square-wire spring threads directly onto conductors for fast connections with no slip. Tightens without ratcheting, easily removed for repeat usage on same size combination or larger. Fluted shell surface permits a firm grip for easy finger-tight connections. Thermoplastic shell shields against environmental extremes. Flame-retardant properties resist heat distortion up to 221 degrees Fahrenheit. Superior flash-over protection. High-dielectric shell features deep skirt design to prevent exposure of bare wire. Buttress threads screw into wire insulation. For copper to copper connections only.
WireGard 25-006 Twist-On Wire Connector PushGard 19-PC8 8-Port Push-In Connector Jandorf 60766 Lug Terminal
Tight, square-wire spring threads directly onto conductors for fast connections with no slip. Tightens without ratcheting, easily removed for repeat usage on same size combination or larger. Fluted shell surface permits a firm grip for easy finger-tight connections. Thermoplastic shell shields against environmental extremes. Flame-retardant properties resist heat distortion up to 221 degrees Fahrenheit. Superior flash-over protection. High-dielectric shell features deep skirt design to prevent exposure of bare wire. Buttress threads screw into wire insulation. For copper to copper connections only. Easy and fast, strip and push conductors into connectors to make reliable, secure connections. Simplified insertion and compact size helps in tight locations. Clear polycarbonate housings have color-coded side panels for connection verification and identification. Corrosion-resistant stainless steel springs restrict wire pullout, yet corrections are possible with a simple left-right twist and pull. Continuity test point for easy voltage checks. Rated at 600 volt maximum in building wire and at 1000 volt maximum in lighting fixtures and luminaries. Copper-to-copper connections only. Jandorf Lug Terminal, Series: 60766, 2 AWG Conductor, 1/2 in Stud, Non-Insulated Insulation, Tin Plated Copper, UL Listed
Jandorf 60767 Lug Terminal Jandorf 60772 Lug Terminal Jandorf 60773 Lug Terminal
Jandorf Lug Terminal, Series: 60767, 2 AWG Conductor, 3/8 in Stud, Non-Insulated Insulation, Tin Plated Copper, UL Listed Jandorf Lug Terminal, Series: 60772, 1/0 AWG Conductor, 1/2 in Stud, Non-Insulated Insulation, Brown, Copper, UL Listed Jandorf Lug Terminal, Series: 60773, 1/0 AWG Conductor, 3/8 in Stud, Non-Insulated Insulation, Brown, Copper, UL Listed
Gardner Bender GSW Standard Toggle Switch Gardner Bender GSW Standard Toggle Switch Cooper 933V Feed-Through Carded Cord Switch
Medium-duty bat handle-screw type terminal. 6" wire leads. Smaller toggle switch for limited space applications. Frame and support are steel with zinc chromate. On/off sequence, has an on/off faceplate. Heavy-duty terminal. On-Off operation. Motor rated. 20 amp at 125 volts AC, 10 amp at 277 volts AC. 1/2" mounting hole. UL Listed. Feed-through In-line on/off cord switch, single pole, screw terminals. 3 Amp, 120 volt AC. For flat or round cords, 18/2 spt-1, spt-2, hpn, 16/2 spt-1, spt-2, hpn, round cords, type svt, maximum diameter 9/32". Temperature rating of -40 to 65 degrees C. UL Listed, Meets all CSA requirements.
Cooper 933B Feed-Through Carded Cord Switch Halex 64407 Conduit Elbow Jandorf 61420 Cord Protector
Feed-through In-line on/off cord switch, single pole, screw terminals. 3 Amp, 120 volt AC. For flat or round cords, 18/2 spt-1, spt-2, hpn, 16/2 spt-1, spt-2, hpn, round cords, type svt, maximum diameter 9/32". Temperature rating of -40 to 65 degrees C. UL Listed, Meets all CSA requirements. To connect EMT conduit together to allow for 90 degree bends. UL Approved. Jandorf Cord Protector, Nylon, Black, For Indoor and Outdoor Use
Gardner Bender GSW-31 Pull Chain Switch LUG CU HD 4AWG 5/16IN STUD SZ Cooper 933 Feed-Through Cord Switch
Mounts in 13/32" diameter hole. Two position, 2 wire. (GSW-35 mounts in 1/2" diameter hole). number 18 AWG, 6" stripped wire leads. Heavy-duty lugs made from pure copper for maximum current flow. Tinned for corrosion resistance. Seamless barrel for maximum strength. Closed ends seal out moisture. Feed-through In-line on/off cord switch, single pole, screw terminals. 3 Amp, 120 volt AC. For flat or round cords, 18/2 spt-1, spt-2, hpn, 16/2 spt-1, spt-2, hpn, round cords, type svt, maximum diameter 9/32". Temperature rating of -40 to 65 degrees C. UL Listed, Meets all CSA requirements.
Jandorf 60771 Lug Terminal WireGard 10-001 Twist-On Wire Connector Hopkins 39035 Convoluted Flexible Tube
Jandorf Lug Terminal, Series: 60771, 8 AWG Conductor, 5/16 in Stud, Non-Insulated Insulation, Tin Plated Copper, UL Listed Tight, square-wire spring threads directly onto conductors for fast connections with no slip. Tightens without ratcheting, easily removed for repeat usage on same size combination or larger. Fluted shell surface permits a firm grip for easy finger-tight connections. Thermoplastic shell shields against environmental extremes. Flame-retardant properties resist heat distortion up to 221 degrees Fahrenheit. Superior flash-over protection. High-dielectric shell features deep skirt design to prevent exposure of bare wire. Buttress threads screw into wire insulation. For copper to copper connections only. Convoluted plastic tubing to protect wiring. Split down the middle for ease of application. Clamshell packaging.
Halex 26076 Knock Out Seals Jandorf 61155 Toggle Switch Nut Jandorf 60770 Lug Terminal
Use to cover exposed knock-out holes in steel outlet boxes and other metal enclosures. Thread size M12x1-6H. Thickness 2.5mm O.D. 14mm. Jandorf Lug Terminal, Series: 60770, 6 AWG Conductor, 3/8 in Stud, Non-Insulated Insulation, Tin Plated Copper, UL Listed
TUBING HEAT SHRINK ASST 127PC Jandorf 60768 Lug Terminal Gardner Bender GSW-12 Toggle Switch
Provides an insulated and flame retardant covering & shrinks up to half of its original diameter for a snug fit. Assortment includes a neatly organized & divided PVC storage case with a chart inside the box lid for easy selection. Jandorf Lug Terminal, Series: 60768, 4 AWG Conductor, 1/2 in Stud, Non-Insulated Insulation, Tin Plated Copper, UL Listed Heavy-duty screw type terminal. Brass terminals, frame and support are steel with zinc chromate, case is black phenolic plastic, external parts are brass/bright nickel. Motor rated.
Gardner Bender GSW-120 Toggle Switch GB-Gardner Bender GSW-20 Toggle Switch Covers GreenGard 25-095 Grounding Wire Connector
Heavy-duty spade type terminal. Versatile toggle switch family with multiple position configurations. Ideal for industrial equipment, automotive or emergency lighting. 1/2" mounting hole required. All switches must be installed with a hex nut (provided) behind panel to prevent damage during installation. Tough EDPM rubber covers protects switches from moisture, dust and dirt. Built-in hex nut base screws onto all GB toggle switches. Specifically designed for making positive ground connections. Connectors feature the same live-action as WingGard connectors with the added plating protection for corrosion resistance in grounding applications. Contoured, offset wings enable firm ground connections with the twist of a hand. Flame retardant, themoplastic shell resists punctures, cuts, abrasion and corrosion. Connectors have a hole in the tip for ground wire. Solid copper to copper connections only. Nos. 15-095; 19-095 and 25-095: minimum 2 #14, maximum 4 #12 wire connections.
Jandorf 60774 Lug Terminal Jandorf 60775 Lug Terminal WireGard 10-002 Twist-On Wire Connector
Jandorf Lug Terminal, Series: 60774, 2/0 AWG Conductor, 1/2 in Stud, Non-Insulated Insulation, Brown, Copper, UL Listed Jandorf Lug Terminal, Series: 60775, 2/0 AWG Conductor, 3/8 in Stud, Non-Insulated Insulation, Brown, Copper, UL Listed Tight, square-wire spring threads directly onto conductors for fast connections with no slip. Tightens without ratcheting, easily removed for repeat usage on same size combination or larger. Fluted shell surface permits a firm grip for easy finger-tight connections. Thermoplastic shell shields against environmental extremes. Flame-retardant properties resist heat distortion up to 221 degrees Fahrenheit. Superior flash-over protection. High-dielectric shell features deep skirt design to prevent exposure of bare wire. Buttress threads screw into wire insulation. For copper to copper connections only.
Hex-Lok 25-2H2 Hex Lock Wire Connector Hex-Lok 25-1H1 Hex Lock Wire Connector Jandorf 61157 Toggle Switch Plate
Easy-on, easy-off without tools. Wings are knurled for a surer grip and offset from the centerline for greater twisting leverage. Easily removed for repeat usage on same size combination or larger. Expandable square-wire plated spring instantly adjusts to the shape and size of the splice for a vibration-resistant connection. Tough thermoplastic shell shields against environmental extremes. Flame-retardant, non-porous and non-corrosive shell resists surface cracking and chemical action. Temperature rating: 221 degrees F. Superior flash-over protection. High-dielectric shell features deep skirt design to prevent exposure of bare wire. Buttress threads screw into wire insulation. Copper to copper connections only. cULus Listed. Multi-range copper to copper connections only. Allows automatic or manual installation without stress whitening or distortion. Use 5/16" socket for H1. Square wire spring grabs and holds wires for secure connections. Long skirt covers stripped wires. Rated at 600 volt maximum and at 1000 volt maximum in lighting fixtures, luminaries and signs. On/off markings.
Gardner Bender GSW Toggle Switch LUG CU HD 4AWG 3/8IN STUD SZ  Jandorf 61418 Cord Protector
Heavy-duty, screw type terminal. Double insulated for moisture protection in all environments. Internal "O" ring design for moisture and dust resistance. Perfect for marine/recreational equipment and weather resistant applications. Heavy-duty lugs made from pure copper for maximum current flow. Tinned for corrosion resistance. Seamless barrel for maximum strength. Closed ends seal out moisture. Jandorf Cord Protector, Nylon, Black, UL Listed, For Indoor and Outdoor Use
CONNECTOR WIRE ASSORTMNT 158PC GB-Gardner Bender HWT-0722 Heat Shrink Tubes Gardner Bender GSW Toggle Switch
Cone shaped springs pull wire into the connectors for a firm & secure grip. Pretwisting wires is not required. Maximum rated voltage: Grey, blue, & orange: 300 Volts; Yellow & red: 600 Volts. Neatly organized PVC storage case. High impact, abrasion and corrosion resistant. Submersible and great for direct burial installations. Inner adhesive bonds to plastics, rubber, neoprene, steel and polyethylene. Continuous operating temperature: -55 degrees C (-67 degrees F) - 125 degrees C (257 degrees F). Shrink temperature: 120 degrees C (250 degrees F). 6 inch length. Medium-duty bat handle-screw type terminal. S.P.S.T. smaller constructed toggle switches for limited space applications. Frame and support are steel with zinc chromate. Brass terminals. On/Off sequence also has an On/Off faceplate.
Cooper Wiring 735V-BOX Toggle Switch Diva D-600RH-DK Turn-To-On Rotary Dimmer Gardner Bender GSLU-70 Single Hole Mechanical Lug
Cooper Wiring Toggle Switch, 125/250 V, 10 A, 1 Poles, Side Wired Terminal, Wall Mounting, 2.03 in Overall Length, 1.39 in Overall Width, Plastic, Ivory, UL Listed, CSA Certified, For Commercial/Industrial and Residential Applications Includes 2 changeable control knobs, one ivory and one white to match either color wall plate, (wall plate sold separately). Rotate to select light level, rotary on/off. Rated at 120 volt, 60Hz, works with 120 volt incandescents and halogens. 600 watt maximum capacity. UL/CSA Listed. Rated for 600 volt copper only. Single hole lugs, easy to install with screwdriver, wrench or pliers. 3/8" bolt size.
Gardner Bender GSW Toggle Switch Diva Traditional D-600PH-DK Push-On Rotary Dimmer 3M DBO/B-6 Underground Splice Kit
Heavy-duty terminal. On-Off operation. Motor rated. 20 amp at 125 volts AC, 10 amp at 277 volts AC. 1/2" mounting hole. UL Listed. Includes 2 changeable control knobs, one ivory and one white to match either color wall plate, (wall plate sold separately). Rotate to select light level, push on/off. 3-way dimmers require 3-way switches. Rated at 120 volt AC, 60Hz, works with 120 volt incandescents and halogens. 600 watt maximum capacity. UL and CSA Listed. Designed to connect and moisture seal electrical connection for direct bury applications, 18-10 AWG, rated up to 600 volts. Combines the quick, reliable connection of a spring connector O/B with the moisture resistance of a high-impact, UV-resistant tube prefilled with moisture-resistant grease. For use with irrigation systems on golf courses, around business and for outdoor lighting systems. Application temperature range 32 - 120 degrees Fahrenheit. EU RoHS Compliant. Flame retardant. UL listed for direct bury.
Cooper 933 Feed-Through Cord Switch Halex 95212B Insulated Metallic Grounding Conduit Bushing with Lug WingGard 25-089 Twist-On Wire Connector
Feed-through In-line on/off cord switch, single pole, screw terminals. 3 Amp, 120 volt AC. For flat or round cords, 18/2 spt-1, spt-2, hpn, 16/2 spt-1, spt-2, hpn, round cords, type svt, maximum diameter 9/32". Temperature rating of -40 to 65 degrees C. UL Listed, Meets all CSA requirements. Zinc die cast. Rounded surface prevents damage to insulation. Thermoplastic liner rated at 150 degree F. Indoor or outdoor use. Use with locknut to terminate service conduit to a cabinet. Lug provided for bonding jumper to a neutral bus bar. UL Listed, CSA Approved. Easy-on, easy-off without tools. Wings are knurled for a surer grip and offset from the centerline for greater twisting leverage. Easily removed for repeat usage on same size combination or larger. Expandable square-wire plated spring instantly adjusts to the shape and size of the splice for a vibration-resistant connection. Tough thermoplastic shell shields against environmental extremes. Flame-retardant, non-porous and non-corrosive shell resists surface cracking and chemical action. Temperature rating: 221 degrees F. Superior flash-over protection. High-dielectric shell features deep skirt design to prevent exposure of bare wire. Buttress threads screw into wire insulation. Copper to copper connections only. cULus Listed.
Gardner Bender GSW Canopy Toggle Switch Mintcraft L760-26-03 Freedom Collection Towel Ring Jandorf 60776 Lug Terminal
Plastic case and switch. Heavy-duty spade type terminal. Double insulated for moisture protection in all environments, internal "O" ring design for moisture and dust resistance. Momentary contact in either direction. Use for marine/recreational equipment or any weather-resistant application. UL/CSA Rated. Zinc alloy, with aluminum ring. Bagged. Jandorf Lug Terminal, Series: 60776, 3/0 AWG Conductor, 1/2 in Stud, Non-Insulated Insulation, Brown, Copper, UL Listed
Jandorf 60777 Lug Terminal Jandorf 61149 Double Circuit Toggle Switch WingGard 17-084 Twist-On Wire Connector
Jandorf Lug Terminal, Series: 60777, 3/0 AWG Conductor, 3/8 in Stud, Non-Insulated Insulation, Brown, Copper, UL Listed Jandorf Toggle Switch, Double Circuit, Series: 61149, 120 V, 10 A, On/Off, Contact Configuration: SPST, 1 Poles, 2-Screw Terminal, UL Listed Easy-on, easy-off without tools. Wings are knurled for a surer grip and offset from the centerline for greater twisting leverage. Easily removed for repeat usage on same size combination or larger. Expandable square-wire plated spring instantly adjusts to the shape and size of the splice for a vibration-resistant connection. Tough thermoplastic shell shields against environmental extremes. Flame-retardant, non-porous and non-corrosive shell resists surface cracking and chemical action. Temperature rating: 221 degrees F. Superior flash-over protection. High-dielectric shell features deep skirt design to prevent exposure of bare wire. Buttress threads screw into wire insulation. Copper to copper connections only. cULus Listed.
WireGard 10-003 Twist-On Wire Connector LUG CU HD 2AWG 3/8IN STUD SZ  TUBING MARIN HT SHRK ASST 42PC
Tight, square-wire spring threads directly onto conductors for fast connections with no slip. Tightens without ratcheting, easily removed for repeat usage on same size combination or larger. Fluted shell surface permits a firm grip for easy finger-tight connections. Thermoplastic shell shields against environmental extremes. Flame-retardant properties resist heat distortion up to 221 degrees Fahrenheit. Superior flash-over protection. High-dielectric shell features deep skirt design to prevent exposure of bare wire. Buttress threads screw into wire insulation. For copper to copper connections only. Heavy-duty lugs made from pure copper for maximum current flow. Tinned for corrosion resistance. Seamless barrel for maximum strength. Closed ends seal out moisture.
Gardner Bender Professional GSW-14 Toggle Switch TAP CUBE 1-OUTLET W/ON-OFF SW Halex 64410 Conduit Elbow
Heavy-duty screw type terminal. Versatile toggle switch family with multiple position configurations. Ideal for industrial equipment, automotive or emergency lighting. 1/2" mounting hole required. All switches must be installed with a hex nut (provided) behind panel to prevent damage during installation. Energy saver power tap kills all residual energy. Illuminated on/off switch indicates when power is on. Green indicator light. Size: 2.5" D X 4.6" W X 4.6" H. To connect EMT conduit together to allow for 90 degree bends. UL Approved.
Jandorf 60769 Lug Terminal Jandorf 61166 Single Circuit Toggle Switch BUSHING GRND MTL INSUL 1-1/4IN
Jandorf Lug Terminal, Series: 60769, 4 AWG Conductor, 3/8 in Stud, Non-Insulated Insulation, Tin Plated Copper, UL Listed Jandorf Toggle Switch, Single Circuit, Series: 61166, 125 V, 10 A, On/Off/On, Contact Configuration: SPDT, 1 Poles, 3-Screw Terminal, UL Listed Zinc die cast. Rounded surface prevents damage to insulation. Thermoplastic liner rated at 150 degree F. Indoor or outdoor use. Use with locknut to terminate service conduit to a cabinet. Lug provided for bonding jumper to a neutral bus bar. UL Listed, CSA Approved.
Core React RI061-VW-K2 Non-Preset Rotary Dimmer Jandorf 60778 Lug Terminal Jandorf 60779 Lug Terminal
For both residential and commercial use. Stylized knob provides dimming, on/off control and indication of light level setting. 6" prestripped wire leads. Ground lead provided. Wraparound heat sink dissipates heat and does not require de-rating. 120 volt AC, 60 Hz. UL Listed. Jandorf Lug Terminal, Series: 60778, 4/0 AWG Conductor, 1/2 in Stud, Non-Insulated Insulation, Brown, Copper, UL Listed Jandorf Lug Terminal, Series: 60779, 4/0 AWG Conductor, 3/8 in Stud, Non-Insulated Insulation, Brown, Copper, UL Listed
Gardner Bender Professional GSW-16 Toggle Switch WingGard 17-086 Twist-On Wire Connector Gardner Bender GSW Toggle Switch
Heavy-duty screw type terminal. Versatile toggle switch family with multiple position configurations. Ideal for industrial equipment, automotive or emergency lighting. 1/2" mounting hole required. All switches must be installed with a hex nut (provided) behind panel to prevent damage during installation. Easy-on, easy-off without tools. Wings are knurled for a surer grip and offset from the centerline for greater twisting leverage. Easily removed for repeat usage on same size combination or larger. Expandable square-wire plated spring instantly adjusts to the shape and size of the splice for a vibration-resistant connection. Tough thermoplastic shell shields against environmental extremes. Flame-retardant, non-porous and non-corrosive shell resists surface cracking and chemical action. Temperature rating: 221 degrees F. Superior flash-over protection. High-dielectric shell features deep skirt design to prevent exposure of bare wire. Buttress threads screw into wire insulation. Copper to copper connections only. cULus Listed. Heavy-duty screw type terminal. Versatile toggle switch family with multiple position configurations. Ideal for industrial equipment, automotive or emergency lighting. 1/2" mounting hole required. All switches must be installed with a hex nut (provided) behind panel to prevent damage during installation.
Jandorf 61132 Double Circuit Toggle Switch Halex 99526 Insulated Metallic Grounding Conduit Bushing with Lug Cooper BP4404V Polarized Plug-In Switch
Jandorf Toggle Switch, Double Circuit, Series: 61132, 125 V, 10 A, On/Off, Contact Configuration: SPST, 1 Poles, 2-Screw Terminal, UL Listed Zinc die cast. Rounded surface prevents damage to insulation. Thermoplastic liner rated at 150 degree F. Indoor or outdoor use. Use with locknut to terminate service conduit to a cabinet. Lug provided for bonding jumper to a neutral bus bar. UL Listed, CSA Approved. Polarized indoor plug-in switch for lamps, appliances, Christmas lights and other hard to reach applications. 120 volt AC, 15 amp, 1800 watts maximum. On-off - carded. UL Listed.
Cooper BP4404W Polarized Plug-In Switch CONNECTOR ELEC ASSORTMNT 308PC WireGard 16-003 Twist-On Wire Connector
Polarized indoor plug-in switch for lamps, appliances, Christmas lights and other hard to reach applications. 120 volt AC, 15 amp, 1800 watts maximum. On-off - carded. UL Listed. Tin plated copper constructed terminals & connectors provide a secure connection between two wires without soldering. Nylon cable clamps can be used for securing & organizing cables, wires, tubings, & rods. UL Listed 100% polyolefin constructed heat-shrink tubings provide an insulated and flame retardant covering for wrapping wire harnesses. Tight, square-wire spring threads directly onto conductors for fast connections with no slip. Tightens without ratcheting, easily removed for repeat usage on same size combination or larger. Fluted shell surface permits a firm grip for easy finger-tight connections. Thermoplastic shell shields against environmental extremes. Flame-retardant properties resist heat distortion up to 221 degrees Fahrenheit. Superior flash-over protection. High-dielectric shell features deep skirt design to prevent exposure of bare wire. Buttress threads screw into wire insulation. For copper to copper connections only.
Mintcraft 3660-07-SOU Towel Ring Jandorf 61156 Toggle Switch Plate Jandorf 61140 Single Circuit Toggle Switch
Mintcraft Towel Ring, Brushed Nickel On/off markings. Jandorf Toggle Switch, Single Circuit, Series: 61140, 125 V, 15 A, On/Off/On, Contact Configuration: SPDT, 1 Poles, 3-Tab Terminal, UL Listed
Mintcraft 3660-35-07-SOU Towel Ring Jandorf 61018 Snap-In Toggle Switch Gardner Bender GSLU-125 Single Hole Mechanical Lug
Mintcraft Towel Ring, Venetian Bronze Jandorf Toggle Switch, Snap-In, Series: 61018, 125 V, 10 A, On/Off, Contact Configuration: SPST, 1 Poles, 2 Positions, 2-Screw Terminal, White, UL Listed Rated for 600 volt copper only. Single hole lugs, easy to install with screwdriver, wrench or pliers. 3/8" bolt size.
Jandorf 61148 Double Circuit Toggle Switch WingGard 10-084 Twist-On Wire Connector Jandorf 61135 Double Circuit Toggle Switch
Jandorf Toggle Switch, Series: 61148, 125 V, 10 A, On/Off, Contact Configuration: SPST, 1 Poles, 2-Tab Terminal, Double Insulation, UL Listed Easy-on, easy-off without tools. Wings are knurled for a surer grip and offset from the centerline for greater twisting leverage. Easily removed for repeat usage on same size combination or larger. Expandable square-wire plated spring instantly adjusts to the shape and size of the splice for a vibration-resistant connection. Tough thermoplastic shell shields against environmental extremes. Flame-retardant, non-porous and non-corrosive shell resists surface cracking and chemical action. Temperature rating: 221 degrees F. Superior flash-over protection. High-dielectric shell features deep skirt design to prevent exposure of bare wire. Buttress threads screw into wire insulation. Copper to copper connections only. cULus Listed. Jandorf Toggle Switch, Double Circuit, Series: 61135, 125 V, 4 A, On/Off, Contact Configuration: SPST, 1 Poles, 2-Wire Terminal, UL Listed
Jandorf 61541 Cord Protector Mintcraft L3660-51-07 Manhattan WireGard 10-004 Twist-On Wire Connector
Fits 16/2 wire, 5/16" ID, card of 2. Mintcraft Towel Ring, Series: Manhattan Collection, Concealed Screw Mounting, Aluminum, White Coral Tight, square-wire spring threads directly onto conductors for fast connections with no slip. Tightens without ratcheting, easily removed for repeat usage on same size combination or larger. Fluted shell surface permits a firm grip for easy finger-tight connections. Thermoplastic shell shields against environmental extremes. Flame-retardant properties resist heat distortion up to 221 degrees Fahrenheit. Superior flash-over protection. High-dielectric shell features deep skirt design to prevent exposure of bare wire. Buttress threads screw into wire insulation. For copper to copper connections only.
GB-Gardner Bender HWT-1138 Heat Shrink Tubes Halex 95215B Insulated Metallic Grounding Conduit Bushing with Lug Halex 64412 Conduit Elbow
High impact, abrasion and corrosion resistant. Submersible and great for direct burial installations. Inner adhesive bonds to plastics, rubber, neoprene, steel and polyethylene. Continuous operating temperature: -55 degrees C (-67 degrees F) - 125 degrees C (257 degrees F). Shrink temperature: 120 degrees C (250 degrees F). 6 inch length. Zinc die cast. Rounded surface prevents damage to insulation. Thermoplastic liner rated at 150 degree F. Indoor or outdoor use. Use with locknut to terminate service conduit to a cabinet. Lug provided for bonding jumper to a neutral bus bar. UL Listed, CSA Approved. To connect EMT conduit together to allow for 90 degree bends. UL Approved.
Gardner Bender HST-102 Heat Shrink Tubing Gardner Bender HST-101 Heat Shrink Tubing Gardner Bender HST-100 Heat Shrink Tubing
Colored heat-shrink tubing for general-purpose applications, such as repairing and covering torn wire insulation. 8' color coded tubes. Continuous operating temperature of -22 to 220 degrees F, Shrink temperature of 230 degrees F. Flame retardant. Meets UL 224, CSA C22.2. Carded. Colored heat-shrink tubing for general-purpose applications, such as repairing and covering torn wire insulation. 8' color coded tubes. Continuous operating temperature of -22 to 220 degrees F, Shrink temperature of 230 degrees F. Flame retardant. Meets UL 224, CSA C22.2. Carded. Colored heat-shrink tubing for general-purpose applications, such as repairing and covering torn wire insulation. 8' color coded tubes. Continuous operating temperature of -22 to 220 degrees F, Shrink temperature of 230 degrees F. Flame retardant. Meets UL 224, CSA C22.2. Carded.
Lutron D-603PH-DK Push-On/Off Rotary Dimmer Jandorf 61112 Double Circuit Toggle Switch Jandorf 61118 Toggle Switch