Home > ELECTRICAL > SPECIALTY ELECTRICAL > COMPUTER ACCESSORIES
Choose a sub category:
DATA CABLE/WIRE & ACCESSORIES WALL CHANNEL- WIREMOLD
Sort By:
1
Halex 96560 Beam Clamp Thomas And Betts Z703 1/2-25 Superstrut Superstrut 200 Series Angle Bracket Fitting
Use to secure conduit to a metal beam. Clamps on beam, girder or similar structure to provide a mounting base for attachment of a conduit hanger, either directly or by means of a threaded rod. Eliminates need to drill hole through beam. Pipe straps hold conduit and pipes in channel. They are inserted along the slot side of the channel and twisted into place. Pre-assembled with locking slot / hex head bolt. Gold-galvanized corrosion free finish. For use in metal framing applications. Manufactured from hot rolled carbon steel.
Thomas And Betts Z703 3/4-25 Superstrut Thomas And Betts Z703 1 1/4-10 Superstrut Superstrut 200 Flat Straight Bracket Splice Plate 7-1/4 in L
Pipe straps hold conduit and pipes in channel. They are inserted along the slot side of the channel and twisted into place. Pre-assembled with locking slot / hex head bolt. Gold-galvanized corrosion free finish. Pipe straps hold conduit and pipes in channel. They are inserted along the slot side of the channel and twisted into place. Pre-assembled with locking slot / hex head bolt. Gold-galvanized corrosion free finish. Splices and supports conduit.
Thomas And Betts Z703 1-25 Thomas And Betts Z702 21/2EG-10 Superstrut Pipe Clamp Thomas And Betts Z500-25 Superstrut Beam Clamp
Pipe straps hold conduit and pipes in channel. They are inserted along the slot side of the channel and twisted into place. Pre-assembled with locking slot / hex head bolt. Gold-galvanized corrosion free finish. Pipe straps hold conduit and pipes in channel. They are inserted along the slot side of the channel and twisted into place. Pre-assembled with locking slot / hex head bolt. For hanging rod, silver electroplated finish.
Superstrut 200 Series Angle Bracket Fitting Thomas And Betts Z703 1 1/2-10 Superstrut Thomas And Betts Z702 3EG-10 Superstrut
For use in metal framing applications. Manufactured from hot rolled carbon steel. Pipe straps hold conduit and pipes in channel. They are inserted along the slot side of the channel and twisted into place. Pre-assembled with locking slot / hex head bolt. Gold-galvanized corrosion free finish. Pipe straps hold conduit and pipes in channel. They are inserted along the slot side of the channel and twisted into place. Pre-assembled with locking slot / hex head bolt.
Gardner Bender GMC-88M5 Modular Electrical Plug Superstrut 200 Flat Right Angle Bracket Corner Plate Superstrut 200 Series Flat Straight Bracket
Use with network/twisted pair cable CAT-5E, 8-position, 8-contact, rounded cable, solid wire. Splices and supports conduit. Splices and supports conduit.
Superstrut ZCM1001/4-10 Cone Nut Carlon Z703 2 Pipe Clamp RECEPTACLE SGL LT ALMOND 125V
Superstrut Cone Nut, 1/4 in Nominal, Nylon Cone, Steel Nut, Galvanized, Gold, For Superstrut Metal Framing and Hanger System Pipe straps hold conduit and pipes in channel. They are inserted along the slot side of the channel and twisted into place. Pre-assembled with locking slot / hex head bolt. Gold-galvanized corrosion free finish. Meets all UL 498 requirements. Triple wire line contacts provide excellent long-term plug retention. Arc-resistant thermostat face. Side wire terminals accept up to #10 solid or stranded wire. Terminal screws backed out. Tamper resistant receptacles have a UL Listed shutter system. 20 amp, 125 volt.
Arrow Hart 1877  Single Receptacle Arrow Hart 1877  Single Receptacle Arrow Hart 1877W  Single Receptacle
Meets all UL 498 requirements. Triple wire line contacts provide excellent long-term plug retention. Arc-resistant thermostat face. Side wire terminals accept up to #10 solid or stranded wire. Terminal screws backed out. Tamper resistant receptacles have a UL Listed shutter system. 20 amp, 125 volt. Meets all UL 498 requirements. Triple wire line contacts provide excellent long-term plug retention. Arc-resistant thermostat face. Side wire terminals accept up to #10 solid or stranded wire. Terminal screws backed out. Tamper resistant receptacles have a UL Listed shutter system. 20 amp, 125 volt. Meets all UL 498 requirements. Triple wire line contacts provide excellent long-term plug retention. Arc-resistant thermostat face. Side wire terminals accept up to #10 solid or stranded wire. Terminal screws backed out. Tamper resistant receptacles have a UL Listed shutter system. 20 amp, 125 volt.
Cooper 7500-Box Decorative Standard Rocker Switch Cooper 7500-Box Decorative Standard Rocker Switch Thomas And Betts ZA1001/4EG-10 Superstrut
Ultrasonic welding and integrated construction of the strap and body. Backwire clamps on the side terminals for installation of #12 and #14 wire. Thermoplastic rocker, top and backbody are virtually unbreakable. Screws accept slotted, Phillips and Robertson head tools for installation in both the U.S. and Canada. Longer, wider strap provides 40 percent more contact area to wall board. Virtually eliminates floating installations. Built-in wire stripper for #12 and #14 wire. Stippled ground screw standard. 15 amp, 120/277 volt AC rating for fluorescent lighting fixtures typical in commercial applications. Push in terminals accept #14 solid wire only. Temperature rating of -20 to 60 degrees C. Meets flammability requirements per UL 94, 6504, V2 rated, VO rated. UL and cUL Listed, Meets all UL20 requirements. Ultrasonic welding and integrated construction of the strap and body. Backwire clamps on the side terminals for installation of #12 and #14 wire. Thermoplastic rocker, top and backbody are virtually unbreakable. Screws accept slotted, Phillips and Robertson head tools for installation in both the U.S. and Canada. Longer, wider strap provides 40 percent more contact area to wall board. Virtually eliminates floating installations. Built-in wire stripper for #12 and #14 wire. Stippled ground screw standard. 15 amp, 120/277 volt AC rating for fluorescent lighting fixtures typical in commercial applications. Push in terminals accept #14 solid wire only. Temperature rating of -20 to 60 degrees C. Meets flammability requirements per UL 94, 6504, V2 rated, VO rated. UL and cUL Listed, Meets all UL20 requirements. For use with 'A' and 'C' series channel and inserts.
Thomas And Betts Z502-10 Superstrut Beam Clamp Gardner Bender GMC-88C6 Modular Electrical Plug Jandorf 61014 Single Electrical Receptacle
For hanging rod, silver electroplated finish. Use with network/twisted pair cable CAT-6, 8-position, 8-contact, rounded cable, solid wire. Jandorf Electrical Receptacle, Single, 2 Poles, 2 Wires, 15 A, 125 V, Black, CSA Certified, For Indoor Use
Jandorf 61015 Single Electrical Receptacle Thomas And Betts ZA1003/8EG-10 Superstrut Arrow Hart 817  Single Receptacle
Jandorf Electrical Receptacle, Single, 2 Poles, 2 Wires, 15 A, 125 V, White, CSA Certified, For Indoor Use For use with 'A' and 'C' series channel and inserts. Meets all UL 498 requirements. Triple wire line contacts provide excellent long-term plug retention. Arc-resistant thermostat face. Side wire terminals accept up to #10 solid or stranded wire. Terminal screws backed out. Tamper resistant receptacles have a UL Listed shutter system. cULus Listed. 15 amp, 125 volt.
Arrow Hart 817W  Single Receptacle Arrow Hart 816  Single Receptacle Arrow Hart 816  Single Receptacle
Meets all UL 498 requirements. Triple wire line contacts provide excellent long-term plug retention. Arc-resistant thermostat face. Side wire terminals accept up to #10 solid or stranded wire. Terminal screws backed out. Tamper resistant receptacles have a UL Listed shutter system. cULus Listed. 15 amp, 125 volt. Meets all UL 498 requirements. Triple wire line contacts provide excellent long-term plug retention. Arc-resistant thermostat face. Side wire terminals accept up to #10 solid or stranded wire. Terminal screws backed out. 15 amp, 250 volt. Meets all UL 498 requirements. Triple wire line contacts provide excellent long-term plug retention. Arc-resistant thermostat face. Side wire terminals accept up to #10 solid or stranded wire. Terminal screws backed out. 15 amp, 250 volt.
Thomas And Betts ZU501-10 Superstrut Beam Clamp Cooper C1303-7V Framed Grounded Toggle Switch Cooper 1301-7 Framed Grounded Toggle Switch
For channel. 3-1/16". Longer, wider strap provides 40 percent more contact area to wall board. Virtually eliminates floating installations. Unbreakable top and bottom housing. Industrial design cam action mechanism insures quiet switch action. Built-in wire stripper for number 14 and number 12 wire. Built-in wire looper for pre-looping. Double riveted switch. Three way switches feature additional push-in common termination for feed-through tapping. Push-in terminals accept number 14 solid wire only. Side wire terminals accept up to number 10 solid or stranded wire. Combination slot/Phillips and Robertson-head terminal screws. 15 amp, 120 volt. Meets all UL 20 requirements. UL Listed. Longer, wider strap provides 40 percent more contact area to wall board. Virtually eliminates floating installations. Unbreakable top and bottom housing. Industrial design cam action mechanism insures quiet switch action. Built-in wire stripper for number 14 and number 12 wire. Built-in wire looper for pre-looping. Double riveted switch. Three way switches feature additional push-in common termination for feed-through tapping. Push-in terminals accept number 14 solid wire only. Side wire terminals accept up to number 10 solid or stranded wire. Combination slot/Phillips and Robertson-head terminal screws. 15 amp, 120 volt. Meets all UL 20 requirements. UL Listed.
Thomas And Betts ZA1001/2EG-10 Superstrut Steel City ZCK535-10 Armored Cable Hanger Clip Steel City R Threaded Rod
For use with 'A' and 'C' series channel and inserts. Flexible conduit hanger from drop wire, #8-#12 wire, .433-.535 O.D. cable. Framing and hanging applications. Free-running, corrosion resistant, burr-free.
Superstrut 200 Series Square Conduit Washer Jandorf 61016 Single Electrical Receptacle Jandorf 61017 Single Electrical Receptacle
GoldGalv finish. Jandorf Electrical Receptacle, Single, 3 Poles, 3 Wires, 15 A, 125 V, Black, CSA Certified, For Indoor Use Jandorf Electrical Receptacle, Single, 3 Poles, 3 Wires, 15 A, 125 V, White, CSA Certified, For Indoor Use
Superstrut 200 Series Square Conduit Washer RECEPTACLE SGL LT ALMOND 250V AmerTac Zenith PN10075EB CAT5E Network Cable
GoldGalv finish. Straight blade receptacle. Meets all UL and CSA specifications. Triple wire line contacts provide excellent long-term plug retention. High impact and chemical-resistant nylon face. Side wire terminals accept up to #10 solid or stranded wire. Terminal screws backed out. 20 amp, 250 volt. Connects computer to hub or RJ45 wall jack. Black cable.
Arrow Hart Eagle CS Lighted Toggle Switch Arrow Hart 1876  Single Receptacle Arrow Hart 1876  Single Receptacle
Side wire terminals accept up to number 10 solid or stranded wire. Rated for fluorescent lighting fixtures typical in commercial applications. .050" thick steel mounting strap zinc-plated for corrosion resistance. Ground screw terminal standard. 20 amp, 120/277 volt. Meets all UL 20 requirements, Federal Specifications WS 896. Straight blade receptacle. Meets all UL and CSA specifications. Triple wire line contacts provide excellent long-term plug retention. High impact and chemical-resistant nylon face. Side wire terminals accept up to #10 solid or stranded wire. Terminal screws backed out. 20 amp, 250 volt. Straight blade receptacle. Meets all UL and CSA specifications. Triple wire line contacts provide excellent long-term plug retention. High impact and chemical-resistant nylon face. Side wire terminals accept up to #10 solid or stranded wire. Terminal screws backed out. 20 amp, 250 volt.
Arrow Hart 1876W Grounded  Single Receptacle Arrow Hart CSB GRD Pro Toggle Switch Arrow Hart CSB GRD Pro Toggle Switch
Straight blade receptacle. Meets all UL and CSA specifications. Triple wire line contacts provide excellent long-term plug retention. High impact and chemical-resistant nylon face. Side wire terminals accept up to #10 solid or stranded wire. Terminal screws backed out. 20 amp, 250 volt. Small toggle switch blends with standard grade toggles. Larger contacts, backwire clamps on the side terminals. Side wire terminals accept up to number 10 solid wire. Back wire terminal accepts 12 or 14 gauge wire. Heavy duty cam action mechanism. Long, broad steel mounting strap, zinc-plated for corrosion resistance. Built-in wire stripper for number 12 and number 14 wire. Ground screw terminal, stippled line and ground contacts standard. Tri-Combo head mounting and terminal screws. 15 amp, 120/277 volt. cULus Listed, NOM certified. Small toggle switch blends with standard grade toggles. Larger contacts, backwire clamps on the side terminals. Side wire terminals accept up to number 10 solid wire. Back wire terminal accepts 12 or 14 gauge wire. Heavy duty cam action mechanism. Long, broad steel mounting strap, zinc-plated for corrosion resistance. Built-in wire stripper for number 12 and number 14 wire. Ground screw terminal, stippled line and ground contacts standard. Tri-Combo head mounting and terminal screws. 15 amp, 120/277 volt. cULus Listed, NOM certified.
Cooper TR817W-BOX Tamper Resistant Single Receptacle Cooper TR817V-BOX Tamper Resistant Single Receptacle Superstrut ZCM1003/8-10 Cone Nut
Meets all UL 498 requirements. Triple wire line contacts provide excellent long-term plug retention. Arc-resistant thermostat face. Side wire terminals accept up to #10 solid or stranded wire. Terminal screws backed out. Tamper resistant receptacles have a UL Listed shutter system. cULus Listed. 15 amp, 125 volt. Meets all UL 498 requirements. Triple wire line contacts provide excellent long-term plug retention. Arc-resistant thermostat face. Side wire terminals accept up to #10 solid or stranded wire. Terminal screws backed out. Tamper resistant receptacles have a UL Listed shutter system. cULus Listed. 15 amp, 125 volt. Superstrut Cone Nut, 3/8 in Nominal, Nylon Cone, Steel Nut, Galvanized, Gold, For Superstrut Metal Framing and Hanger System
Arrow Hart 32B Non-Grounded  Electrical Receptacle Arrow Hart 38B Non-Grounded  Electrical Receptacle Thomas And Betts Z503-5 Superstrut Beam Clamp
Flush mount, range and dryer. Meets all UL 498 requirements. Heavy gauge steel mounting strap, zinc plated for corrosion resistance. For use with copper or aluminum wire, 75 degrees Celsius rated terminals. Fits one or two gang enclosures. NEMA 10-50. Flush mount, range and dryer. Meets all UL 498 requirements. Heavy gauge steel mounting strap, zinc plated for corrosion resistance. For use with copper or aluminum wire, 75 degrees Celsius rated terminals. Fits one or two gang enclosures. NEMA 10-30. For hanging rod, silver electroplated finish.
Cooper TR1877W-BXSP Tamper Resistant Single Receptacle Cooper TR1877V-BXSP Tamper Resistant Single Receptacle Legrand Despard ACD3I Special Purpose Toggle Switch
Meets all UL 498 requirements. Triple wire line contacts provide excellent long-term plug retention. Arc-resistant thermostat face. Side wire terminals accept up to #10 solid or stranded wire. Terminal screws backed out. Tamper resistant receptacles have a UL Listed shutter system. 20 amp, 125 volt. Meets all UL 498 requirements. Triple wire line contacts provide excellent long-term plug retention. Arc-resistant thermostat face. Side wire terminals accept up to #10 solid or stranded wire. Terminal screws backed out. Tamper resistant receptacles have a UL Listed shutter system. 20 amp, 125 volt. Older style device with a rounded shape that is slightly flattened top and bottom. Flexible, smaller than a standard device, fits in a smaller opening. Used in locations with limited space or restricted options. UL Listed, conforms to NEMA specifications.
Superstrut ZCM1001/2-10 Cone Nut Arrow Hart CS Compact Toggle Switch Arrow Hart CS Grounded Compact Toggle Switch
Superstrut Cone Nut, 1/2 in Nominal, Nylon Cone, Steel Nut, Galvanized, Gold, For Superstrut Metal Framing and Hanger System Side wire terminals accept up to number 10 solid or stranded wire. Rated for fluorescent lighting fixtures typical in commercial applications. 0.050" thick steel mounting strap zinc-plated for corrosion resistance. Ground screw terminal standard. Meets all UL 20 requirements, Federal specifications WS896. Side wire terminals accept up to number 10 solid or stranded wire. Rated for fluorescent lighting fixtures typical in commercial applications. 0.050" thick steel mounting strap zinc-plated for corrosion resistance. Ground screw terminal standard. Meets all UL 20 requirements, Federal specifications WS896.
Arrow Hart CS Grounded Compact Toggle Switch AmerTac Zenith PN10145EB CAT5E Network Cable Steel City R Threaded Rod
Side wire terminals accept up to number 10 solid or stranded wire. Rated for fluorescent lighting fixtures typical in commercial applications. 0.050" thick steel mounting strap zinc-plated for corrosion resistance. Ground screw terminal standard. Meets all UL 20 requirements, Federal specifications WS896. Connects computer to hub or RJ45 wall jack. Black cable. Framing and hanging applications. Free-running, corrosion resistant, burr-free.
Core Aspire 9503DS Rocker Switch Core Aspire 9503SG Rocker Switch Core Aspire 9503WS Rocker Switch
Curved profile rocker, accented by the color and texture of its surrounding frame, with two-tone elegance. Virtually unbreakable, ultrasonically welded top and backbody; extra-long, extra-wide mounting straps; #14 push-in terminals; backwire clamps on side terminals; easy-access ground screws and built-in wire strippers. 15 amp, 120/277 volt. Curved profile rocker, accented by the color and texture of its surrounding frame, with two-tone elegance. Virtually unbreakable, ultrasonically welded top and backbody; extra-long, extra-wide mounting straps; #14 push-in terminals; backwire clamps on side terminals; easy-access ground screws and built-in wire strippers. 15 amp, 120/277 volt. Curved profile rocker, accented by the color and texture of its surrounding frame, with two-tone elegance. Virtually unbreakable, ultrasonically welded top and backbody; extra-long, extra-wide mounting straps; #14 push-in terminals; backwire clamps on side terminals; easy-access ground screws and built-in wire strippers. 15 amp, 120/277 volt.
Arrow Hart Eagle CS Toggle Switch Arrow Hart Eagle CS Lighted Toggle Switch Arrow Hart Eagle CS Toggle Switch
Side wire terminals accept up to number 10 solid or stranded wire. Rated for fluorescent lighting fixtures typical in commercial applications. .050" thick steel mounting strap zinc-plated for corrosion resistance. Ground screw terminal standard. 20 amp, 120/277 volt. Meets all UL 20 requirements, Federal Specifications WS 896. Side wire terminals accept up to number 10 solid or stranded wire. Rated for fluorescent lighting fixtures typical in commercial applications. .050" thick steel mounting strap zinc-plated for corrosion resistance. Ground screw terminal standard. 20 amp, 120/277 volt. Meets all UL 20 requirements, Federal Specifications WS 896. Side wire terminals accept up to number 10 solid or stranded wire. Rated for fluorescent lighting fixtures typical in commercial applications. .050" thick steel mounting strap zinc-plated for corrosion resistance. Ground screw terminal standard. 20 amp, 120/277 volt. Meets all UL 20 requirements, Federal Specifications WS 896.
Arrow Hart CS Compact Toggle Switch Arrow Hart CS Compact Toggle Switch Cooper 125 Dryer Electrical Receptacle
Side wire terminals accept up to number 10 solid or stranded wire. Rated for fluorescent lighting fixtures typical in commercial applications. .050" thick steel mounting strap zinc-plated for corrosion resistance. Ground screw terminal standard. 20 amp, 120/277 volt. Meets all UL 20 requirements, Federal Specifications WS 896. Side wire terminals accept up to number 10 solid or stranded wire. Rated for fluorescent lighting fixtures typical in commercial applications. .050" thick steel mounting strap zinc-plated for corrosion resistance. Ground screw terminal standard. 20 amp, 120/277 volt. Meets all UL 20 requirements, Federal Specifications WS 896. Surface mount, range and dryer. Meets all UL 498 requirements. For use with copper or aluminum wire, 75 degrees Celsius rated terminals. Lay-in terminals accept up to number 4 wire. 3/4" and 1" knockouts and adjustable cord clamp allow for wiring from bottom or back. Size: 2-1/32" x 2-1/2" x 4-3/4". NEMA 10-30.
Cooper 112 Range Electrical Receptacle Cooper 5223-7 Grounded Standard Toggle Switch Cooper 5223-7 Standard Toggle Switch
Surface mount, range and dryer. Meets all UL 498 requirements. For use with copper or aluminum wire, 75 degrees Celsius rated terminals. Lay-in terminals accept up to number 4 wire. 3/4" and 1" knockouts and adjustable cord clamp allow for wiring from bottom or back. Size: 2-1/32" x 2-1/2" x 4-3/4". NEMA 10-50. Meets all UL 20 requirements. For direct connection to aluminum or copper wire. Longer, wider strap provides 40 percent more contact area to wall board. Virtually eliminates floating installations. Industrial design cam action mechanism insures quiet switch action. Side wire terminals accept up to #10 solid or stranded wire. Terminal screws are backed out-ready for wiring. Combination slot/Phillips head mounting and terminal screws. 15 amp, 120 volt. UL Listed. Meets all UL 20 requirements. For direct connection to aluminum or copper wire. Longer, wider strap provides 40 percent more contact area to wall board. Virtually eliminates floating installations. Industrial design cam action mechanism insures quiet switch action. Side wire terminals accept up to #10 solid or stranded wire. Terminal screws are backed out-ready for wiring. Combination slot/Phillips head mounting and terminal screws. 15 amp, 120 volt. UL Listed.
Arrow Hart TR274 Duplex Combination Switch/Receptacle Cooper 1303-7LT Lighted Grounded Toggle Switch Gardner Bender GMC-88C5 Modular Electrical Plug
Shutter designed to prevent the insertion of foreign objects. Neon pilot light which is on when switch is on. Switch is horsepower rated for motor loads per UL 20. Thermoplastic toggle, top and backbody. Ultrasonic welding and integrated construction of the strap and body. Tri-combo screw heads. Backwire clamps on side terminals for installation of #12 and #14 AWG wire. Single pole - 15 amp switch, 2-pole, 3-wire tamper resistant receptacle. UL listed, NEMA 5-15. Meets all UL 20 requirements. Longer, wider strap provides 40 percent more contact area to wall board. Virtually eliminates floating installations. Industrial design cam action mechanism insures quiet switch action. Built-in wire stripper for number 14  wire. Built-in wire looper for pre-looping. Double riveted switch. Three way switches feature additional push-in common termination for feed-through tapping. Push-in terminals accept number 14 solid wire only. Side wire terminals accept up to number 10 solid or stranded wire. Combination slot/Phillips head mounting and terminal screws. Use with network/twisted pair cable CAT-5E, 8-position, 8-contact, rounded cable, solid wire.
Steel City R Threaded Rod Cooper C1303-7LTV-L Lighted Grounding Toggle Switch Cooper C1303-7LTW-L Lighted Grounding Toggle Switch
Framing and hanging applications. Free-running, corrosion resistant, burr-free. Meets all UL 20 requirements. Longer, wider strap provides 40 percent more contact area to wall board. Virtually eliminates floating installations. Industrial design cam action mechanism insures quiet switch action. Built-in wire stripper for number 14  wire. Built-in wire looper for pre-looping. Double riveted switch. Three way switches feature additional push-in common termination for feed-through tapping. Push-in terminals accept number 14 solid wire only. Side wire terminals accept up to number 10 solid or stranded wire. Combination slot/Phillips head mounting and terminal screws. Meets all UL 20 requirements. Longer, wider strap provides 40 percent more contact area to wall board. Virtually eliminates floating installations. Industrial design cam action mechanism insures quiet switch action. Built-in wire stripper for number 14  wire. Built-in wire looper for pre-looping. Double riveted switch. Three way switches feature additional push-in common termination for feed-through tapping. Push-in terminals accept number 14 solid wire only. Side wire terminals accept up to number 10 solid or stranded wire. Combination slot/Phillips head mounting and terminal screws.
Cooper TR274V Duplex Cooper TR274W Duplex RECEPTACLE/SWITCH COMBO LA
Shutter designed to prevent the insertion of foreign objects. Neon pilot light which is on when switch is on. Switch is horsepower rated for motor loads per UL 20. Thermoplastic toggle, top and backbody. Ultrasonic welding and integrated construction of the strap and body. Tri-combo screw heads. Backwire clamps on side terminals for installation of #12 and #14 AWG wire. Single pole - 15 amp switch, 2-pole, 3-wire tamper resistant receptacle. UL listed, NEMA 5-15. Shutter designed to prevent the insertion of foreign objects. Neon pilot light which is on when switch is on. Switch is horsepower rated for motor loads per UL 20. Thermoplastic toggle, top and backbody. Ultrasonic welding and integrated construction of the strap and body. Tri-combo screw heads. Backwire clamps on side terminals for installation of #12 and #14 AWG wire. Single pole - 15 amp switch, 2-pole, 3-wire tamper resistant receptacle. UL listed, NEMA 5-15. Shutter designed to prevent the insertion of foreign objects. Neon pilot light which is on when switch is on. Switch is horsepower rated for motor loads per UL 20. Thermoplastic toggle, top and backbody. Ultrasonic welding and integrated construction of the strap and body. Tri-combo screw heads. Backwire clamps on side terminals for installation of #12 and #14 AWG wire. Single pole - 15 amp switch, 2-pole, 3-wire tamper resistant receptacle. UL listed, NEMA 5-15.
AmerTac Zenith PN10255EB CAT5E Network Cable Cooper C7503W-SP-L Decorative Standard Rocker Switch Cooper C7503V-SP Decorative Standard Rocker Switch
Connects computer to hub or RJ45 wall jack. Black cable. Ultrasonic welding and integrated construction of the strap and body. Backwire clamps on the side terminals for installation of #12 and #14 wire. Redesigned paddle. Built-in wire stripper for #12 and #14 wire. Stippled ground screw standard. 120/277 volt AC rating for fluorescent lighting fixtures typical in commercial applications. Push in terminals accept #14 solid wire only. Temperature rating of -20 to 60 degrees C. Meets flammability requirements per UL 94, 6504, V2 rated, VO rated. UL and cUL Listed, Meets all UL20 requirements, file # E18704. Carded. Ultrasonic welding and integrated construction of the strap and body. Backwire clamps on the side terminals for installation of #12 and #14 wire. Redesigned paddle. Built-in wire stripper for #12 and #14 wire. Stippled ground screw standard. 120/277 volt AC rating for fluorescent lighting fixtures typical in commercial applications. Push in terminals accept #14 solid wire only. Temperature rating of -20 to 60 degrees C. Meets flammability requirements per UL 94, 6504, V2 rated, VO rated. UL and cUL Listed, Meets all UL20 requirements, file # E18704. Carded.
AmerTac Zenith PU1010ABB Type A/B 2.0 USB Cable Arrow Hart CRL530R  Locking Twist Electrical Receptacle Arrow Hart 1234-BOX  Grounded Power Receptacle
Type A to type B USB 2.0 cable. Connects USB compliant devices. Transfer speeds up to 480 Mbps. Rugged nylon face and body. Clearly marked rating, NEMA configuration and approval listings on receptacle face. One piece brass contacts for performance and minimum heat rise. Back wire terminal clamps for secure wiring. Combination head screws standard - slot/Phillips. Flush mount, range and dryer. Meets all UL 498 requirements. For use with copper or aluminum wire. 75 degrees Celsius rated terminals. Fits one or two gang enclosures, not included. NEMA 6-30.
Arrow Hart 1263-BOX  Power Receptacle Arrow Hart 1257-SP Grounded  Electrical Receptacle Arrow Hart 1258-SP Grounded  Electrical Receptacle
Flush receptacle, travel trailer. Heavy gauge galvanized steel mounting strap for corrosion resistance. For use with copper or aluminum wire. Meets all UL 498 requirements. Used with 83-box travel trailer 3 wire plug, SKU 698.2383. NEMA TT-30. Flush mount, range and dryer. Meets all UL 498 requirements. Heavy gauge steel mounting strap, zinc plated for corrosion resistance. For use with copper or aluminum wire, 75 degrees Celsius rated terminals. Fits one or two gang enclosures. NEMA 14-30. Flush mount, range and dryer. Meets all UL 498 requirements. Heavy gauge steel mounting strap, zinc plated for corrosion resistance. For use with copper or aluminum wire, 75 degrees Celsius rated terminals. Fits one or two gang enclosures. NEMA 14-50.
AmerTac Zenith VH1003HD High Speed HDMI Cable Lutron FS-5FH-DK Rotary Control Switch AmerTac Zenith PU1005KTB USB Cable Kit
Transfers audio/video signals between components with resolutions up to 1080p. Connects HD component to HDTV. Includes 2 changeable control knobs, one ivory and one white to match either color wall plate, (wall plate sold separately). 3-speed control is for use with one ceiling paddle fan. Rotate to select one of three fan speeds: low, medium, or high, or rotary on/off. Variable speed control can be used with 1 or more ceiling paddle fans or exhaust fans (do not mix fan types on control). Rotate to select fan speed, rotary on/off. Includes Mini 4 and 5, B, Micro and A. Connects any USB compliant device. Transfer speeds up to 480Mbps.
Arrow Hart 805  Non-Grounded Single Receptacle Arrow Hart RhinoBox L520R Locking Electrical Receptacle Cooper C7513W-SP Decorative Lighted Standard Rocker Switch
Flush mount. Meets all UL 498 requirements. Heavy gauge steel mounting strap, zinc plated for corrosion resistance. For use with copper or aluminum wire, 75 degrees Celsius rated terminals. Flush receptacles fit one or two gang enclosures. 10-20R NEMA configuration. Rugged nylon face and body. Clearly marked rating, NEMA configuration and approval listings on receptacle face. One piece brass contacts for performance and minimum heat rise. Back wire terminal clamps for secure wiring. Combination head screws standard - slot/Phillips. Ultrasonic welding and integrated construction of the strap and body. Backwire clamps on the side terminals for installation of #12 and #14 wire. Redesigned paddle. Built-in wire stripper for #12 and #14 wire. Stippled ground screw standard. 120/277 volt AC rating for fluorescent lighting fixtures typical in commercial applications. Push in terminals accept #14 solid wire only. Temperature rating of -20 to 60 degrees C. Meets flammability requirements per UL 94, 6504, V2 rated, VO rated. UL and cUL Listed, Meets all UL20 requirements, file # E18704. Carded.
Hardlock CWL620R Ground Lock Single Electrical Receptacle Arrow Hart TR7730V Decorator Combination Switch/Receptacle Arrow Hart TR7730W Decorator Combination Switch/Receptacle
High impact resistant nylon face and body. Combination head terminal and mounting screws. One piece, wrap around mounting strap. Back wire terminal clamps for easy, secure wiring. One piece brass contacts offer superior design and minimum heat rise. UL Listed. Shutter designed to prevent the insertion of foreign objects. Switch is horsepower rated for motor loads per UL 20. Thermoplastic toggle, top and backbody. Ultrasonic welding and integrated construction of the strap and body. Tri-combo screw heads. Backwire clamps on side terminals for installation of #12 and #14 AWG wire. 15 amp 120V/AC switch, 15 amp 125V/AC TR receptacle. UL listed. Shutter designed to prevent the insertion of foreign objects. Switch is horsepower rated for motor loads per UL 20. Thermoplastic toggle, top and backbody. Ultrasonic welding and integrated construction of the strap and body. Tri-combo screw heads. Backwire clamps on side terminals for installation of #12 and #14 AWG wire. 15 amp 120V/AC switch, 15 amp 125V/AC TR receptacle. UL listed.
Arrow Hart CRL1420R  Locking Twist Electrical Receptacle Arrow Hart 1254-BOX  Grounded Power Receptacle Arrow Hart CRL630R  Locking Twist Electrical Receptacle
High impact-resistant nylon face and body. One piece wraparound mounting strap for added strength and durability. Color-coded body to identify amperage. Flush mount, range and dryer. Heavy gauge steel mounting strap, zinc-plated for corrosion resistance. Meets all UL 498 requirements. For use with copper or aluminum wire, 75 degrees Celsius rated terminals. Fits one or two gang enclosures. NEMA 6-50. High impact resistant nylon face and body. Combination head terminal and mounting screws. One piece, wrap around mounting strap. Back wire terminal clamps for easy, secure wiring. One piece brass contacts offer superior design and minimum heat rise. UL Listed.
React RFS5-W-K Fully Variable Non-Preset Rotary Control Switch React RFS5-V-K Fully Variable Non-Preset Rotary Control Switch Cooper 7513W-BOX Decorative Lighted Standard Rocker Switch
Use to moderate air flow and room temperature anywhere. Replaces any standard wall switch. Rated at 5 amp to allow several fans to operate simultaneously. Designed to operate ceiling fans using shaded pole or split capacitor motors only. UL Listed. Use to moderate air flow and room temperature anywhere. Replaces any standard wall switch. Rated at 5 amp to allow several fans to operate simultaneously. Designed to operate ceiling fans using shaded pole or split capacitor motors only. UL Listed. Ultrasonic welding and integrated construction of the strap and body. Backwire clamps on the side terminals for installation of #12 and #14 wire. Thermoplastic rocker, top and backbody are virtually unbreakable. Screws accept slotted, Phillips and Robertson head tools for installation in both the U.S. and Canada. Longer, wider strap provides 40 percent more contact area to wall board. Virtually eliminates floating installations. Built-in wire stripper for #12 and #14 wire. Stippled ground screw standard. 15 amp, 120/277 volt AC rating for fluorescent lighting fixtures typical in commercial applications. Push in terminals accept #14 solid wire only. Temperature rating of -20 to 60 degrees C. Meets flammability requirements per UL 94, 6504, V2 rated, VO rated. UL and cUL Listed, Meets all UL20 requirements.
Cooper 7513V-BOX Decorative Lighted Standard Rocker Switch Lutron FSQ-2FH-DK Rotary Control Switch Cooper 1303-7 Framed Grounded Toggle Switch
Ultrasonic welding and integrated construction of the strap and body. Backwire clamps on the side terminals for installation of #12 and #14 wire. Thermoplastic rocker, top and backbody are virtually unbreakable. Screws accept slotted, Phillips and Robertson head tools for installation in both the U.S. and Canada. Longer, wider strap provides 40 percent more contact area to wall board. Virtually eliminates floating installations. Built-in wire stripper for #12 and #14 wire. Stippled ground screw standard. 15 amp, 120/277 volt AC rating for fluorescent lighting fixtures typical in commercial applications. Push in terminals accept #14 solid wire only. Temperature rating of -20 to 60 degrees C. Meets flammability requirements per UL 94, 6504, V2 rated, VO rated. UL and cUL Listed, Meets all UL20 requirements. Includes 2 changeable control knobs, one ivory and one white to match either color wall plate, (wall plate sold separately). 3-speed control is for use with one ceiling paddle fan. Rotate to select one of three fan speeds: low, medium, or high, or rotary on/off. Variable speed control can be used with 1 or more ceiling paddle fans or exhaust fans (do not mix fan types on control). Rotate to select fan speed, rotary on/off. Longer, wider strap provides 40 percent more contact area to wall board. Virtually eliminates floating installations. Unbreakable top and bottom housing. Industrial design cam action mechanism insures quiet switch action. Built-in wire stripper for number 14 and number 12 wire. Built-in wire looper for pre-looping. Double riveted switch. Three way switches feature additional push-in common termination for feed-through tapping. Push-in terminals accept number 14 solid wire only. Side wire terminals accept up to number 10 solid or stranded wire. Combination slot/Phillips and Robertson-head terminal screws. 15 amp, 120 volt. Meets all UL 20 requirements. UL Listed.
Cooper 1303-7 Framed Grounded Toggle Switch Cooper 1303-7 Framed Grounded Toggle Switch Arrow Hart 1212 Grounded Electrical Receptacle
Longer, wider strap provides 40 percent more contact area to wall board. Virtually eliminates floating installations. Unbreakable top and bottom housing. Industrial design cam action mechanism insures quiet switch action. Built-in wire stripper for number 14 and number 12 wire. Built-in wire looper for pre-looping. Double riveted switch. Three way switches feature additional push-in common termination for feed-through tapping. Push-in terminals accept number 14 solid wire only. Side wire terminals accept up to number 10 solid or stranded wire. Combination slot/Phillips and Robertson-head terminal screws. 15 amp, 120 volt. Meets all UL 20 requirements. UL Listed. Longer, wider strap provides 40 percent more contact area to wall board. Virtually eliminates floating installations. Unbreakable top and bottom housing. Industrial design cam action mechanism insures quiet switch action. Built-in wire stripper for number 14 and number 12 wire. Built-in wire looper for pre-looping. Double riveted switch. Three way switches feature additional push-in common termination for feed-through tapping. Push-in terminals accept number 14 solid wire only. Side wire terminals accept up to number 10 solid or stranded wire. Combination slot/Phillips and Robertson-head terminal screws. 15 amp, 120 volt. Meets all UL 20 requirements. UL Listed. Surface mount, range and dryer. Meets all UL 498 requirements. For use with copper or aluminum wire, 75 degrees Celsius rated terminals. Lay-in terminals accept up to #4 wire. 3/4" and 1" knockouts and adjustable cord clamp allow for wiring from bottom or back. Size: 2-3/32" x 2-1/2" x 4-3/4". NEMA 14-50.
Arrow Hart 1225 Grounded Electrical Receptacle AmerTac Zenith VH1006HD High Speed HDMI Cable Cooper 1303V Framed Non-Grounded Toggle Switch
Surface mount, range and dryer. Meets all UL 498 requirements. For use with copper or aluminum wire, 75 degrees Celsius rated terminals. Lay-in terminals accept up to number 4 wire. 3/4" and 1" knockouts and adjustable cord clamp allow for wiring from bottom or back. Size: 2-3/32" x 2-1/2" x 4-3/4". NEMA 14-30. Transfers audio/video signals between components with resolutions up to 1080p. Connects HD component to HDTV. Longer, wider strap provides 40 percent more contact area to wall board. Virtually eliminates floating installations. Industrial design cam action mechanism. Built-in wire stripper for number 14 and number 12 wire. Built-in wire looper. Double riveted switch. Push-in terminals accept number 12 or number 14 solid wire only. Side wire terminals accept up to number 10 solid or stranded wire. Combination slot/Phillips head mounting and terminal screws. 15 amp, 120 volt. Meets all UL 20 requirements.
Arrow Hart 1252  Commercial Power Receptacle Eagle 1303 Non-Grounded Toggle Switch Cooper 1303B Framed Non-Grounded Toggle Switch
Surface mount, range and dryer. Meets all UL 498 requirements. For use with copper or aluminum wire, 75 degrees Celsius rated terminals. Lay-in terminals accept up to  number 4 wire. 3/4" and 1" concentric knockouts and adjustable cord clamp allow for wiring from bottom or back. Size: 2-1/2" x 4-3/4" x 2-3/32". NEMA 6-50. Plug for this receptacle - Orgill sku (640.9478). Longer, wider strap provides 40 percent more contact area to wall board. Virtually eliminates floating installations. Industrial design cam action mechanism. Built-in wire stripper for number 14 and number 12 wire. Built-in wire looper. Double riveted switch. Push-in terminals accept number 12 or number 14 solid wire only. Side wire terminals accept up to number 10 solid or stranded wire. Combination slot/Phillips head mounting and terminal screws. 15 amp, 120 volt. Meets all UL 20 requirements. Longer, wider strap provides 40 percent more contact area to wall board. Virtually eliminates floating installations. Industrial design cam action mechanism. Built-in wire stripper for number 14 and number 12 wire. Built-in wire looper. Double riveted switch. Push-in terminals accept number 12 or number 14 solid wire only. Side wire terminals accept up to number 10 solid or stranded wire. Combination slot/Phillips head mounting and terminal screws. 15 amp, 120 volt. Meets all UL 20 requirements.
AmerTac Zenith PN10505EB CAT5E Network Cable Arrow Hart Hart-Lock CWL515R Single Locking Electrical Receptacle Arrow Hart WD1232-BOX  Commercial Power Receptacle
Connects computer to hub or RJ45 wall jack. Black cable. Single locking receptacle. Glass reinforced nylon body and face. One piece brass contacts. Back and side wire terminal clamps. 15 amp - 125 volt. CSA certified. . Surface mount, range and dryer. Meets all UL 498 requirements. For use with copper or aluminum wire, 75 degrees Celsius rated terminals. Lay-in terminals accept up to number 4 wire. 3/4" and 1" concentric knockouts and adjustable cord clamp allow for wiring from bottom or back. Size: 2-1/2" x 4-3/4" x 2- 3/32". NEMA 6-30.
Arrow Hart 3032 Lighted Toggle Switch Thomas And Betts ZB1400HS 10 Superstrut Conduit Channel Strut Thomas And Betts ZA1200HS 4 Superstrut Conduit Channel Strut
Industrial design cam action mechanism insures quiet switch action. Color-coded faces identify amperage: blue-15 amp, red-20 amp, green-30 amp. Automatic grounding system eliminates need for bonding jumper in grounded metal enclosure. Back and side wire terminals accept up to number 10 solid or stranded wire. Ground screw terminal standard. 0.050" thick steel mounting strap zinc-plated for corrosion resistance. 30 amp, 120/277 volt rating for fluorescent lighting fixtures. Combination slot/Phillips head mounting and terminal screws. Meets all UL 20 requirements, Federal specifications WS 896. Steel half slot strut, gold galvanized. For support and framing applications. Steel half slot strut, gold galvanized. For support and framing applications.
Cooper 1303-7W Framed Grounding Toggle Switch Zenith VA3001HDEX Foldable HDMI Cable Extender American Tack and Hdwe VA3001HDFA HDMI Cable Adapter/Connectors
Longer, wider strap provides 40 percent more contact area to wall board. Virtually eliminates floating installations. Unbreakable top and bottom housing. Industrial design cam action mechanism insures quiet switch action. Built-in wire stripper for number 14 and number 12 wire. Built-in wire looper for pre-looping. Double riveted switch. Three way switches feature additional push-in common termination for feed-through tapping. Push-in terminals accept number 14 solid wire only. Side wire terminals accept up to number 10 solid or stranded wire. Combination slot/Phillips and Robertson-head terminal screws. 15 amp, 120 volt. Meets all UL 20 requirements. UL Listed. Combines two HDMI cables to extend new or existing hookup. Adjusts up to a 90 degree angle to connect in hard to reach places. 2.25" height x .87" width x .5" depth. Adjusts up to a 90 degree angle to connect a HDMI cable to a wall mounted HDTV or other device  in tight, hard to reach places. Meets current HDMI specifications and can support HDTV resolution. 2.25" height x .87" width x .5" depth.
Cooper Wiring RDC15-V-K Fan/Light Controls Cooper RDC15-W-K Combination Switch Cooper 1303-7B Framed Grounding Toggle Switch
Adjust lights and fans together. For overhead light/fan combination fixtures. Rated for 300 watt light. Designed to operate ceiling fans using shaded pole or split capacitor motors only. 4 speed with wire leads. UL Listed. Adjust lights and fans together. For overhead light/fan combination fixtures. Rated for 300 watt light. Designed to operate ceiling fans using shaded pole or split capacitor motors only. 4 speed with wire leads. UL Listed. Longer, wider strap provides 40 percent more contact area to wall board. Virtually eliminates floating installations. Unbreakable top and bottom housing. Industrial design cam action mechanism insures quiet switch action. Built-in wire stripper for number 14 and number 12 wire. Built-in wire looper for pre-looping. Double riveted switch. Three way switches feature additional push-in common termination for feed-through tapping. Push-in terminals accept number 14 solid wire only. Side wire terminals accept up to number 10 solid or stranded wire. Combination slot/Phillips and Robertson-head terminal screws. 15 amp, 120 volt. Meets all UL 20 requirements. UL Listed.
Cooper 1303-7V Framed Grounding Toggle Switch Arrow Hart CRL1430R  Locking Electrical Receptacle Cooper CWL1020R Ground Lock Single Receptacle
Longer, wider strap provides 40 percent more contact area to wall board. Virtually eliminates floating installations. Unbreakable top and bottom housing. Industrial design cam action mechanism insures quiet switch action. Built-in wire stripper for number 14 and number 12 wire. Built-in wire looper for pre-looping. Double riveted switch. Three way switches feature additional push-in common termination for feed-through tapping. Push-in terminals accept number 14 solid wire only. Side wire terminals accept up to number 10 solid or stranded wire. Combination slot/Phillips and Robertson-head terminal screws. 15 amp, 120 volt. Meets all UL 20 requirements. UL Listed. High impact-resistant nylon face and body. One piece wraparound mounting strap for added strength and durability. Color-coded body to identify amperage. High impact-resistant nylon face and body. One piece wraparound mounting strap for added strength and durability. Color-coded body to identify amperage. NEMA L10-20.
Lutron Electronics SFSQ-LFH-WH Fan/Light Controls SWITCH TGLE 3W GRD LA 15A 120V Gardner Bender GMC-88M6 Modular Electrical Plug
Rocker switch turns light on/off. Single pole, 1.5 amp 3 speed fan control with light switch. Wallplate not included. Longer, wider strap provides 40 percent more contact area to wall board. Virtually eliminates floating installations. Unbreakable top and bottom housing. Industrial design cam action mechanism insures quiet switch action. Built-in wire stripper for number 14 and number 12 wire. Built-in wire looper for pre-looping. Double riveted switch. Three way switches feature additional push-in common termination for feed-through tapping. Push-in terminals accept number 14 solid wire only. Side wire terminals accept up to number 10 solid or stranded wire. Combination slot/Phillips and Robertson-head terminal screws. 15 amp, 120 volt. Meets all UL 20 requirements. UL Listed. Use with network/twisted pair cable CAT-6, 8-position, 8-contact, rounded cable, solid wire.
Thomas And Betts ZA1200HS 10 Superstrut Conduit Channel Strut Cooper 1303B-BOX Framed Non-Grounded Toggle Switch Cooper 1303V-BOX Framed Non-Grounded Toggle Switch
Steel half slot strut, gold galvanized. For support and framing applications. Longer, wider strap provides 40 percent more contact area to wall board. Virtually eliminates floating installations. Industrial design cam action mechanism. Built-in wire stripper for number 14 and number 12 wire. Built-in wire looper. Double riveted switch. Push-in terminals accept number 12 or number 14 solid wire only. Side wire terminals accept up to number 10 solid or stranded wire. Combination slot/Phillips head mounting and terminal screws. 15 amp, 120 volt. Meets all UL 20 requirements. Longer, wider strap provides 40 percent more contact area to wall board. Virtually eliminates floating installations. Industrial design cam action mechanism. Built-in wire stripper for number 14 and number 12 wire. Built-in wire looper. Double riveted switch. Push-in terminals accept number 12 or number 14 solid wire only. Side wire terminals accept up to number 10 solid or stranded wire. Combination slot/Phillips head mounting and terminal screws. 15 amp, 120 volt. Meets all UL 20 requirements.
Cooper 1303 Framed Non-Grounded Toggle Switch Lutron Electronics SFSQ-FH-WH Skylark Fan Controls AmerTac Zenith VH3003HDMN High Speed Mini HDMI Cable
Longer, wider strap provides 40 percent more contact area to wall board. Virtually eliminates floating installations. Industrial design cam action mechanism. Built-in wire stripper for number 14 and number 12 wire. Built-in wire looper. Double riveted switch. Push-in terminals accept number 12 or number 14 solid wire only. Side wire terminals accept up to number 10 solid or stranded wire. Combination slot/Phillips head mounting and terminal screws. 15 amp, 120 volt. Meets all UL 20 requirements. Controls one ceiling paddle fan. Fan capacity 1.5 amp maximum. Quiet, will not cause fan motor hum. High/Medium/Low/Off. Wallplate not included. 120 volt, 60 Hz. UL Listed. Male 19 pin HDMI type A connector to male 19 pin mini HDMI type C connector. Gold plated connectors.
Thomas And Betts ZA1200HS 6 Superstrut Conduit Channel Strut American Tack and Hdwe VH1006HDKIT HDMI Cable Kits Lutron Electronics S2-LFSQH-WH Skylark Fan/Light Controls
Steel half slot strut, gold galvanized. For support and framing applications. Transfers audio/video signals between components with resolutions up to 1080p. Connects HD component to HDTV. Contains two 6' cables and a connector to make a 12' cable if needed. Dual dimmer and fan controls. For use with one ceiling paddle fan with full range light dimmer. Rated for 1.5 amp fan and up to 300 watt incandescent/halogen light. 120 volt, 60 Hz. UL Listed.
SWITCH DEC 3W 15A 120/277V ORB SWITCH DEC 3WY 15A 120/277V SG Maestro Eco-Timer MA-T530GH-WH Countdown Timer
Ultrasonic welding and integrated construction of the strap and body. Backwire clamps on the side terminals for installation of #12 and #14 wire. Thermoplastic rocker, top and backbody are virtually unbreakable. Screws accept slotted, Phillips and Robertson head tools for installation in both the U.S. and Canada. Longer, wider strap provides 40 percent more contact area to wall board. Virtually eliminates floating installations. Built-in wire stripper for #12 and #14 wire. Stippled ground screw standard. 15 amp, 120/277 volt AC rating for fluorescent lighting fixtures typical in commercial applications. Push in terminals accept #14 solid wire only. Temperature rating of -20 to 60 degrees C. Meets flammability requirements per UL 94, 6504, V2 rated, VO rated. UL and cUL Listed, Meets all UL20 requirements. Ultrasonic welding and integrated construction of the strap and body. Backwire clamps on the side terminals for installation of #12 and #14 wire. Thermoplastic rocker, top and backbody are virtually unbreakable. Screws accept slotted, Phillips and Robertson head tools for installation in both the U.S. and Canada. Longer, wider strap provides 40 percent more contact area to wall board. Virtually eliminates floating installations. Built-in wire stripper for #12 and #14 wire. Stippled ground screw standard. 15 amp, 120/277 volt AC rating for fluorescent lighting fixtures typical in commercial applications. Push in terminals accept #14 solid wire only. Temperature rating of -20 to 60 degrees C. Meets flammability requirements per UL 94, 6504, V2 rated, VO rated. UL and cUL Listed, Meets all UL20 requirements. Use with exhaust fans to reduce moisture, mold, and mildew. Use with lighting to ensure lights are never left on for a long period of time. Tap on to start timer; touch rocker to adjust countdown timer in five minute increments, up to 30 minutes. Softly lit orange LEDs indicate the time remaining before a one-minute warning signals when the fan or lights are about to turn off. Controls a 3 amp fan or up to 600 W/VA (5 amps) of incandescent/halogen or magnetic low-voltage lighting. No neutral wire required. UL listed.
CONTROL FAN/LIGHT F/LED WHITE SWITCH/ROCKER 3W LA           Arrow Hart 817  Single Receptacle
SWITCH/ROCKER 3W LA
Our Price: $40.40
Single pole fan/light control. For adding a wall control to switch any light kit and change fan speed without pull chains. Switch for all bulb types including LED, CFL, incandescent and halogen. 120W, 1A LED / CFL, 240W, 2A Incandescent / halogen. 1.5A, 3-speed with off fan speed. For indoor use only. Ultrasonic welding and integrated construction of the strap and body. Backwire clamps on the side terminals for installation of #12 and #14 wire. Thermoplastic rocker, top and backbody are virtually unbreakable. Screws accept slotted, Phillips and Robertson head tools for installation in both the U.S. and Canada. Longer, wider strap provides 40 percent more contact area to wall board. Virtually eliminates floating installations. Built-in wire stripper for #12 and #14 wire. Stippled ground screw standard. 15 amp, 120/277 volt AC rating for fluorescent lighting fixtures typical in commercial applications. Push in terminals accept #14 solid wire only. Temperature rating of -20 to 60 degrees C. Meets flammability requirements per UL 94, 6504, V2 rated, VO rated. UL and cUL Listed, Meets all UL20 requirements. Meets all UL 498 requirements. Triple wire line contacts provide excellent long-term plug retention. Arc-resistant thermostat face. Side wire terminals accept up to #10 solid or stranded wire. Terminal screws backed out. Tamper resistant receptacles have a UL Listed shutter system. cULus Listed. 15 amp, 125 volt.
DIMMER PLUG-IN RETAIL KIT     SWITCH NEUTRAL 5A             DIMMER IN-WALL
DIMMER PLUG-IN RETAIL KIT
Our Price: $52.79
SWITCH NEUTRAL 5A
Our Price: $52.89
DIMMER IN-WALL
Our Price: $54.29
For plug-in lamps offers smart lighting control without the Smart Bridge. Plug the dimmers into a standard outlet. The dimmer can control up to two lamps. Includes plug-in lamp dimmer, Pico remote and Installation Information. Provides switching of multiple load types. Turns lights or fan on and off, for added convenience, control with a 2-button pico remote (pj2-2b-gwh-l01 sold separately). Works with incandescent, halogen, ELV and MLV, LED, fluorescent and fans. Neutral wire required. Coordinating wall plate sold separately. Works with your voice assistant or smart phone via the free Lutron app for IOS and Android (Smart Bridge required) Connects with more leading smart home brands (including Amazon Alexa, Apple HomeKit, the Google Assistant, Nest, Serena shades and Sonos) than any other leading smart lighting control brand (Smart Bridge required). For wall and ceiling lights. Replaces an existing switch and Installs in 3 Steps and about 15 minutes and are ideal for older homes as they don?t require a neutral wire. Can control up to 17 bulbs (based on 8.5W LED bulb, 60 W incandescent equivalent). Works with up to 150 W dimmable LED/CFL OR 600 W incandescent/ halogen bulbs. (Wallplate sold separately). Use Pico remote for multi-location (2 or more switches controlling a set of lights. (Wall mount kit sold separately). Works with your voice assistant or smart phone via the FREE Lutron App. (Smart Bridge sold separately).
CONTROL FAN/LIGHT F/DMMR WHITE DIMMER INWL EXPNSN RETAIL KIT DIMMER INWALL WIRELESS WH
DIMMER INWALL WIRELESS WH
Our Price: $58.82
Single pole, dual dimmer and fan controller. Tap on to preset light level / fan speed; tap off. Tap twice for full on. Touch rocker to adjust light level / fan speed. Four fan speeds plus off. Indicator lights display light level and fan speed. No canopy module required. Requires separate wires for fan and light. No neutral wire required. Front accessible service switch for fixture bulb replacement. Prevents tripping of AFCI breakers. Fault detection / indication. Light pull chain off detection. Lamp failure detection. Short circuit detection / protection. Capable of controlling up to 75W dimmable CFL / LED or 250W incandescent / halogen lighting loads. Capable of controlling up to 1.5A paddle-type ceiling fan loads. UL Listed to US and Canadian safety requirements. For indoor use only. For hardwired wall and ceiling lights offers smart lighting control without the Smart Bridge. Replaces one wired switch and takes three steps and about 15 minutes to install. The kit can control up to 17 bulbs. Includes In-wall light dimmer, Lutron Claro wallplate, Pico remote and Installation Information. Turns standard lights into smart lights. Designed to connect to the Halo Home Bluetooth Mesh network with no hub or internet connection required. Can occupy any position in a multi-gang junction box, while the other positions of the junction box can be occupied by switches or other dimmers. Can be configured to work with the HALO Home In-wall Accessory dimmer to enable three-way lighting control within a space.
DIMMER INWALL ALL-LD ACCS     Despard 1433 Special Purpose Single Receptacle Southwire 57557901 CAT5E Data Cable
DIMMER INWALL ALL-LD ACCS
Our Price: $58.82
Controls your HALO Home lighting devices from a central location. Designed to connect to the HALO Home Bluetooth Mesh network with no hub or internet connection required. Can occupy any position in a multi-gang junction box, while the other positions of the junction box can be occupied by switches or other dimmers. Can operate HALO Home lighting fixtures with single, 3-way or multi-switch controls. For standard lights, the Accessory Dimmer can be used for multi-switch control when paired with HALO Home In-wall Smart Dimmer. Older style device with a rounded shape that is slightly flattened top and bottom. Flexible, smaller than a standard device, fits in a smaller opening. Used in locations with limited space or restricted options. With ground lead. Buy American Act compliant. UL Listed. Conforms to NEMA specifications. 15 amp, 250 volt. Thermoplastic insulation. May be run in plenums or may be used in the place of CMR, CMG, CM, CMX cables. 24 AWG, 4 pair cables made with soft annealed copper conductors. FEP insulation, PVC jacket. Pair 1 - white, blue, pair 2 - white, orange, pair 3 - white, green, pair 4 - white, brown. 22 pounds per 1,000 feet. UL Listed. Meets 2011 National Electrical Code, NFPA 262 and RoHS Compliant.
SWITCH DIMMER SMART KIT       Southwire 56917749 CAT5E Plenum Cable INTERNET BRDG GEN1 WH 4.0
SWITCH DIMMER SMART KIT
Our Price: $98.74
INTERNET BRDG GEN1 WH 4.0
Our Price: $200.84
For hardwired lights gives you smart lighting control in one room. It is easy to use, simple to set up, and gives you a smart system that you can expand at your own pace. Replaces one wired switch. Includes Smart bridge, dimmer, Pico remote. Wallplate. For use in computer networking and internet connection applications. May be used in the place of CMP, CMR, CMG, CM and CMX cables. 24-gauge wire with 4 cable pairings (white/blue, white/orange, white/green and white/brown). Soft annealed copper conductors. PVC jacket. 1000'.
Southwire 57795503 CAT5E RG6 Coax Data Cable Southwire 57642901 CAT5E Data Cable Coleman 96263M606 CAT5 Multiline Data Cable
RG6/U quad shield coaxial with category 5E cable. 2 x category 5E, 2 x RG6/U quad shield, individually jacketed. 18 AWG 2C + 24AWG. Overall PVC jacket, nominal outside diameter of 0.670". Rating 300 volt, 75 degrees C. CM Rated. Made in USA. UL Listed. Reel. Multimedia. For outdoor and direct burial. PVC jacket. For use in computer networking and internet connection applications. May be used in the place of CMP, CMR, CMG, CM and CMX cables. 24-gauge wire with 4 cable pairings (white/blue, white/orange, white/green and white/brown). Soft annealed copper conductors. Category 5E enhanced data cable with 24 AWG bare copper conductors, polyethylene (non-plenum) insulation and PVC (non-plenum) jacket. Use for gigabit ethernet, bi-directional transmissions, 100 BaseT, 1000 BaseT, broad band video, fast ethernet, 155 Mbs ATM, TI, ISDN, 622 Mbps ATM. UL1666, tested to 350 MHz., C(ETL) listed CMG FT4, ETL Verified to TIA/EIA 568-C.2 and meets or exceeds TIA/EIA 568-C.2.
   
 
1