Home > ELECTRICAL > SPECIALTY ELECTRICAL > AUDIO & VIDEO SUPPLIES > VIDEO ACCESSORIES
Choose a sub category:
WEATHERPROOF BOXES WEATHERPROOF BOXES WIRENUTS / CONNECTORS
WIRENUTS / CONNECTORS TERMINAL LUGS TERMINAL LUGS
WEATHERPROOF COVERS WEATHERPROOF COVERS ELECTRICAL TAPE/DUCT SEAL
ELECTRICAL TAPE/DUCT SEAL WEATHERPROOF LAMPHOLDERS WEATHERPROOF LAMPHOLDERS
BOX/COVER GASKETS BOX/COVER GASKETS WIRE TERMINAL ENDS
WIRE TERMINAL ENDS TUBING & WRAPS TUBING & WRAPS
ANTI-OXIDANTS ANTI-OXIDANTS SPLIT BOLT CONNECTORS
SPLIT BOLT CONNECTORS SPLICER / REDUCERS SPLICER / REDUCERS
CABLE STAPLES CABLE STAPLES CABLE TIES
CABLE TIES WIRE CLAMPS/CLIPS WIRE CLAMPS/CLIPS
GLUES / CEMENTS GLUES / CEMENTS WIRE MANAGEMENT KITS
WIRE MANAGEMENT KITS ELECTRICAL BUSHINGS ELECTRICAL BUSHINGS
ELECTRICAL GROMMETS ELECTRICAL GROMMETS MISC WIRING CONNECTORS
MISC WIRING CONNECTORS
Sort By:
1
Halex 71205B 2-Hole Conduit Strap Halex 61612B 2-Hole Snap-On Conduit Strap Halex 71210B 2-Hole Conduit Strap
Indoor or outdoor applications. Use to secure PVC conduit to wood, masonry or similar surface. Bulk packed. To support EMT conduit where greater load bearing is required. Indoor or outdoor applications. Indoor or outdoor applications. Use to secure PVC conduit to wood, masonry or similar surface. Bulk packed.
Halex 71212B 2-Hole Conduit Strap Halex 96163 2-Hole Snap-On Conduit Strap Carlon Snap Strap E978DC-CAR 1-Hole Single Conduit Strap
Indoor or outdoor applications. Use to secure PVC conduit to wood, masonry or similar surface. Bulk packed. To support EMT conduit where greater load bearing is required. Indoor or outdoor applications. Safe, non-conductive. To be used in accordance with NEC, Article 347.8 conduit spacing requirements. For use with Schedule 40/80 non-metallic solvent weld fittings.
Halex 71215B 2-Hole Conduit Strap Carlon Snap Strap E978EC-CAR 1-Hole Single Conduit Strap Halex 96821 Rigid Reducing Conduit Washer
Indoor or outdoor applications. Use to secure PVC conduit to wood, masonry or similar surface. Bulk packed. Safe, non-conductive. To be used in accordance with NEC, Article 347.8 conduit spacing requirements. For use with Schedule 40/80 non-metallic solvent weld fittings. Use to reduce the size of the conduit hole knockout opening in a steel outlet box or other metal enclosure. Must use one inside the enclosure opening and one on the outside. UL Listed, CSA Approved.
Halex 96831 Rigid Reducing Conduit Washer Halex 96832 Rigid Reducing Conduit Washer Halex 96111 1-Hole Conduit Strap
Use to reduce the size of the conduit hole knockout opening in a steel outlet box or other metal enclosure. Must use one inside the enclosure opening and one on the outside. UL Listed, CSA Approved. Use to reduce the size of the conduit hole knockout opening in a steel outlet box or other metal enclosure. Must use one inside the enclosure opening and one on the outside. UL Listed, CSA Approved. Indoor or outdoor applications. Use to secure Rigid or I.M.C. conduit to wood, masonry or similar surfaces.
Halex 61220B 2-Hole Conduit Strap Halex 71220B 2-Hole Conduit Strap Carlon Snap Strap E978FC-CAR 1-Hole Single Conduit Strap
Indoor or outdoor use. Use to secure Rigid or IMC conduit to wood, masonry or similar surfaces where greater load bearing is required. UL Listed, CSA Approved. Indoor or outdoor applications. Use to secure PVC conduit to wood, masonry or similar surface. Bulk packed. Safe, non-conductive. To be used in accordance with NEC, Article 347.8 conduit spacing requirements. For use with Schedule 40/80 non-metallic solvent weld fittings.
Halex 96843 Rigid Reducing Conduit Washer Halex 96121 2-Hole Conduit Strap Thomas & Betts E977DC-CTN 2-Hole Conduit Clamp
Use to reduce the size of the conduit hole knockout opening in a steel outlet box or other metal enclosure. Must use one inside the enclosure opening and one on the outside. UL Listed, CSA Approved. Indoor or outdoor use. Use to secure Rigid or IMC conduit to wood, masonry or similar surfaces where greater load bearing is required. UL Listed, CSA Approved. Offers same chemical resistance as Carlon nonmetallic conduit for a complete, corrosion resistant system. UV resistant for use in direct sunlight. Use in accordance with conduit spacing requirements per NEC. Each clamp requires 2 screws, 2 nuts, and 2 washers. Gray clamps for standard conduit.
Halex 96151 1-Hole Snap-On Conduit Strap Halex 96780 Conduit Hanger WASHER RDUCNG RGD 1-1/4X1/2IN
Indoor or outdoor applications. To support EMT conduit. Use to secure and suspend conduit from overhead supports. Comes with a nut and bolt. Use to reduce the size of the conduit hole knockout opening in a steel outlet box or other metal enclosure. Must use one inside the enclosure opening and one on the outside. UL Listed, CSA Approved.
WASHER RDUCNG RGD 1-1/4X3/4IN Halex 96161 2-Hole Snap-On Conduit Strap Halex 96112 1-Hole Conduit Strap
Use to reduce the size of the conduit hole knockout opening in a steel outlet box or other metal enclosure. Must use one inside the enclosure opening and one on the outside. UL Listed, CSA Approved. To support EMT conduit where greater load bearing is required. Indoor or outdoor applications. Indoor or outdoor applications. Use to secure Rigid or I.M.C. conduit to wood, masonry or similar surfaces.
Halex 96213 1-Hole Cable Strap Halex 96781 Conduit Hanger Thomas & Betts E977EC-CTN 2-Hole Conduit Clamp
Steel, use to secure BX cable to wood, masonry or similar surface. Use to secure and suspend conduit from overhead supports. Comes with a nut and bolt. Offers same chemical resistance as Carlon nonmetallic conduit for a complete, corrosion resistant system. UV resistant for use in direct sunlight. Use in accordance with conduit spacing requirements per NEC. Each clamp requires 2 screws, 2 nuts, and 2 washers. Gray clamps for standard conduit.
Halex 96122 2-Hole Conduit Strap WASHER RDUCNG RGD 1-1/2X1/2IN WASHER RDUCING RGD 1-1/2X3/4IN
Indoor or outdoor use. Use to secure Rigid or IMC conduit to wood, masonry or similar surfaces where greater load bearing is required. UL Listed, CSA Approved. Use to reduce the size of the conduit hole knockout opening in a steel outlet box or other metal enclosure. Must use one inside the enclosure opening and one on the outside. UL Listed, CSA Approved. Use to reduce the size of the conduit hole knockout opening in a steel outlet box or other metal enclosure. Must use one inside the enclosure opening and one on the outside. UL Listed, CSA Approved.
Halex 96162 2-Hole Snap-On Conduit Strap STRAP CBL 1HOLE SRVC ENT      Halex 96152 1-Hole Snap-On Conduit Strap
To support EMT conduit where greater load bearing is required. Indoor or outdoor applications. Indoors or outdoors. Steel, use to secure service entrance cable (SEU, SER) to wood, masonry or similar surface. Indoor or outdoor applications. To support EMT conduit.
Halex 26155 1-Hole Snap-On Conduit Strap Halex 26211 1-Hole Conduit Strap Halex 61225 2-Hole Conduit Strap
Indoor or outdoor applications. To support EMT conduit. Steel, use to secure BX cable to wood, masonry or similar surface. To support EMT conduit where greater load bearing is required. Indoor or outdoor applications.
Halex 26210 1-Hole Service Entrance Strap Cooper RKRD-W-BP Replacement Knob Cooper RKRD-V-BP Replacement Knob
Indoors or outdoors. Steel, use to secure service entrance cable (SEU, SER) to wood, masonry or similar surface. CULus Listed, NOM certified. CULus Listed, NOM certified.
CordMate Legrand C Wireway Outside Elbow CordMate Legrand C Wireway Inside Elbow CordMate Legrand C Wireway Flat Elbow
Hides and organizes loose cords and wires. Hides and organizes loose cords and wires. Hides and organizes loose cords and wire.
Halex 26165 2-Hole Snap-On Conduit Strap CordMate Legrand C19 Channel Coupling Lutron Preset/Slide-to-Off Standard Replacement Knob
To support EMT conduit where greater load bearing is required. Indoor or outdoor applications. Joins channels that hide and organize loose cords and wires. UL Listed. Replacement knob for Skylark dimmers.
Lutron Replacement Knob Halex 26153 1-Hole Snap-On Conduit Strap CordMate II Legrand C Wireway Flat Elbow
Replacement knob for Skylark dimmers. Indoor or outdoor applications. To support EMT conduit. Hides and organizes loose cords and wire.
Halex 26125 2-Hole Conduit Strap Bell 5269-5 Closure Plug Bell 5269-7 Closure Plug
Indoor or outdoor use. Use to secure Rigid or IMC conduit to wood, masonry or similar surfaces where greater load bearing is required. UL Listed, CSA Approved. For use with weatherproof boxes, extension adapters, cluster covers and round splice boxes to seal off unused outlets. For use with weatherproof boxes, extension adapters, cluster covers and round splice boxes to seal off unused outlets.
Bell 5269-6 Closure Plug CordMate II Legrand C Wireway Inside Elbow CordMate II Legrand C Wireway Outside Elbow
For use with weatherproof boxes, extension adapters, cluster covers and round splice boxes to seal off unused outlets. For making a 90 degree turn around an inside corner from wall-to-wall or wall-to-ceiling. For making a 90 degree turn around an outside corner.
CordMate II Legrand C59 Joint Cover Channel Coupling CordMate II Legrand C 3-Way Standard T-Fitting Carlon E977LC-CAR Conduit Clamp
Joins channels that hide and organize loose cords and wires. UL Listed. For installation requiring 3-way branching including 90-degree angle. Offers same chemical resistance as Carlon nonmetallic conduit for a complete, corrosion resistant system. UV resistant for use in direct sunlight. Use in accordance with conduit spacing requirements per NEC. Each clamp requires 2 screws, 2 nuts, and 2 washers. Gray clamps for standard conduit.
Halex 26163 2-Hole Snap-On Conduit Strap Thomas & Betts E977FC-CTN 2-Hole Conduit Clamp Halex 26126 2-Hole Conduit Strap
To support EMT conduit where greater load bearing is required. Indoor or outdoor applications. Offers same chemical resistance as Carlon nonmetallic conduit for a complete, corrosion resistant system. UV resistant for use in direct sunlight. Use in accordance with conduit spacing requirements per NEC. Each clamp requires 2 screws, 2 nuts, and 2 washers. Gray clamps for standard conduit. Indoor or outdoor use. Use to secure Rigid or IMC conduit to wood, masonry or similar surfaces where greater load bearing is required. UL Listed, CSA Approved.
Bell 5269-0 Closure Plug Bell 5270-5 Closure Plug STRAP CBL 1HOLE OVAL SRVC ENT
For use with weatherproof boxes, extension adapters, cluster covers and round splice boxes to seal off unused outlets. For use with weatherproof boxes, extension adapters, cluster covers and round splice boxes to seal off unused outlets. Indoors or outdoors. Steel, use to secure service entrance cable (SEU, SER) to wood, masonry or similar surface.
Gardner Bender GCC-310 2-Hole Conduit Strap Halex 26154 1-Hole Snap-On Conduit Strap Lutron Electronics RK-WH Replacement Knobs
Heavy-duty polyethylene, resists deterioration from UV rays and breakage from extreme cold. Enables secure fastening of plastic electrical conduit, schedule 40 PVC, copper tubing. Indoor or outdoor applications. To support EMT conduit. Replacement knob for Rotary dimmers.
Lutron RK-IV Standard Replacement Knob Halex 67860 Conduit Hanger Halex 26156 1-Hole Snap-On Conduit Strap
Replacement knob for Rotary dimmers. Use to secure and suspend conduit from overhead supports. Comes with a nut and bolt. Indoor or outdoor applications. To support EMT conduit.
Halex 26166 2-Hole Snap-On Conduit Strap Thomas & Betts E977GC-CTN 2-Hole Conduit Clamp Halex 61230 2-Hole Conduit Strap
To support EMT conduit where greater load bearing is required. Indoor or outdoor applications. Offers same chemical resistance as Carlon nonmetallic conduit for a complete, corrosion resistant system. UV resistant for use in direct sunlight. Use in accordance with conduit spacing requirements per NEC. Each clamp requires 2 screws, 2 nuts, and 2 washers. Gray clamps for standard conduit. Indoor or outdoor use. Use to secure Rigid or IMC conduit to wood, masonry or similar surfaces where greater load bearing is required. UL Listed, CSA Approved.
Halex 26164 2-Hole Snap-On Conduit Strap Gardner Bender GCC-410 2-Hole Conduit Strap Legrand NM7 Nonmetallic Raceway Inside Elbow
To support EMT conduit where greater load bearing is required. Indoor or outdoor applications. Heavy-duty polyethylene, resists deterioration from UV rays and breakage from extreme cold. Enables secure fastening of plastic electrical conduit, schedule 40 PVC, copper tubing. For making a 90 degree inside turn around a corner from wall-to-wall or wall-to-ceiling.
Legrand NM8 Nonmetallic Raceway Outside Elbow Wiremold NM910 Connection Cover CordMate Legrand NM Raceway Wireway Inside Elbow
For making a 90 degree outside turn around a corner. Mounting components for NMI wire channel, including screws and anchors, wire clips and joint cover. For making a 90 degree inside turn around a corner from wall-to-wall or wall-to-ceiling.
Legrand NMW910 Raceway Accessory Pack CordMate Legrand NM Raceway Wireway Outside Elbow Hubbell 5193-0 3-Hole Cluster Lampholder Cover
Mounting components for NMI wire channel, including screws and anchors, wire clips and joint cover. For making a 90 degree outside turn around a corner. For wet locations. Gasket, screws and plugs included. 4" cluster cover. Use 75-150 watt maximum, Die cast zinc. One 1/2" NPT hole. UL Listed.
Bell Raco 5193-1 Round Cluster Cover Thomas & Betts E977HC-CTN 2-Hole Conduit Clamp Gardner Bender GCC-120 2-Hole Conduit Strap
For wet locations. Gasket, screws and plugs included. 4" cluster cover. Use 75-150 watt maximum, Die cast zinc. One 1/2" NPT hole. UL Listed. Offers same chemical resistance as Carlon nonmetallic conduit for a complete, corrosion resistant system. UV resistant for use in direct sunlight. Use in accordance with conduit spacing requirements per NEC. Each clamp requires 2 screws, 2 nuts, and 2 washers. Gray clamps for standard conduit. Heavy-duty polyethylene, resists deterioration from UV rays and breakage from extreme cold. Enables secure fastening of plastic electrical conduit, schedule 40 PVC, copper tubing.
Gardner Bender GCC-510 2-Hole Conduit Strap Gardner Bender GCC-220 2-Hole Conduit Strap Hubbell 5186-0 1-Hole Cluster Lampholder Cover
Heavy-duty polyethylene, resists deterioration from UV rays and breakage from extreme cold. Enables secure fastening of plastic electrical conduit, schedule 40 PVC, copper tubing. Heavy-duty polyethylene, resists deterioration from UV rays and breakage from extreme cold. Enables secure fastening of plastic electrical conduit, schedule 40 PVC, copper tubing. For wet locations. Gasket, screws and plugs included. Use 75-150 watt maximum, Par-38 lamps. Die cast zinc, powder coat finish provides maximum weatherability and scratch resistance. Includes installation hardware, gasket, and multi-lingual instructions. One 1/2" NPT hole. Underwriters Recognized Component CSA C22.2 No. 18 NEMA 3R Rated.
Bell Raco 5186 Rectangular Cluster Cover Bell Raco 5186-6 1-Hole Cluster Rectangular Weatherproof Cover Thomas & Betts E977JCR-CTN 2-Hole Conduit Clamp
For wet locations. Gasket, screws and plugs included. Use 75-150 watt maximum, Par-38 lamps. Die cast zinc, powder coat finish provides maximum weatherability and scratch resistance. Includes installation hardware, gasket, and multi-lingual instructions. One 1/2" NPT hole. Underwriters Recognized Component CSA C22.2 No. 18 NEMA 3R Rated. For wet locations. Gasket, screws and plugs included. Use 75-150 watt maximum, Par-38 lamps. Die cast zinc, powder coat finish provides maximum weatherability and scratch resistance. Includes installation hardware, gasket, and multi-lingual instructions. One 1/2" NPT hole. Underwriters Recognized Component CSA C22.2 No. 18 NEMA 3R Rated. Offers same chemical resistance as Carlon nonmetallic conduit for a complete, corrosion resistant system. UV resistant for use in direct sunlight. Use in accordance with conduit spacing requirements per NEC. Each clamp requires 2 screws, 2 nuts, and 2 washers. Gray clamps for standard conduit.
WASHER REDUCING 2X1IN         WASHER REDUCING 2X1-1/4IN     Bell Raco 5193-7 3-Hole Cluster Lamp Holder Cover
WASHER REDUCING 2X1IN
Our Price: $3.60
Use to reduce the size of the conduit hole knockout opening in a steel outlet box or other metal enclosure. Must use one inside the enclosure opening and one on the outside. UL Listed, CSA Approved. Use to reduce the size of the conduit hole knockout opening in a steel outlet box or other metal enclosure. Must use one inside the enclosure opening and one on the outside. UL Listed, CSA Approved. For wet locations. Gasket, screws and plugs included. 4" cluster cover. Use 75-150 watt maximum, Die cast zinc. One 1/2" NPT hole. UL Listed.
Bell Raco 5193-5 Round Cluster Cover Bell Raco 5193-6 Round Cluster Cover Hubbell 5197-0 3-Hole Cluster Lampholder Cover
For wet locations. Gasket, screws and plugs included. 4" cluster cover. Use 75-150 watt maximum, Die cast zinc. One 1/2" NPT hole. UL Listed. For wet locations. Gasket, screws and plugs included. 4" cluster cover. Use 75-150 watt maximum, Die cast zinc. One 1/2" NPT hole. UL Listed. For wet locations. Gasket, screws and plugs included. 4" cluster cover. Die cast zinc. Three 1/2" NPT holes. UL Listed.
Bell Raco 5197-2 Round Cluster Cover Bell Raco 5189 Rectangular Cluster Cover Bell Raco 5189 Rectangular Cluster Cover
For wet locations. Gasket, screws and plugs included. 4" cluster cover. Die cast zinc. Three 1/2" NPT holes. UL Listed. Includes installation hardware, gasket, and multi-lingual instructions. 3 hole covers are supplied with two closure plugs. Die cast zinc construction. Three 1/2" NPT holes. UR - Underwrites recognized component CSA C22.2 No. 18 compliant. Includes installation hardware, gasket, and multi-lingual instructions. 3 hole covers are supplied with two closure plugs. Die cast zinc construction. Three 1/2" NPT holes. UR - Underwrites recognized component CSA C22.2 No. 18 compliant.
Hubbell 5189-0 3-Hole Cluster Lampholder Cover Bell Raco 5197-1 Round Cluster Cover RECEPTACLE SGL LT ALMOND 125V
Includes installation hardware, gasket, and multi-lingual instructions. 3 hole covers are supplied with two closure plugs. Die cast zinc construction. Three 1/2" NPT holes. UR - Underwrites recognized component CSA C22.2 No. 18 compliant. For wet locations. Gasket, screws and plugs included. 4" cluster cover. Die cast zinc. Three 1/2" NPT holes. UL Listed. Meets all UL 498 requirements. Triple wire line contacts provide excellent long-term plug retention. Arc-resistant thermostat face. Side wire terminals accept up to #10 solid or stranded wire. Terminal screws backed out. Tamper resistant receptacles have a UL Listed shutter system. 20 amp, 125 volt.
Arrow Hart 1877  Single Receptacle Arrow Hart 1877  Single Receptacle Arrow Hart 1877W  Single Receptacle
Meets all UL 498 requirements. Triple wire line contacts provide excellent long-term plug retention. Arc-resistant thermostat face. Side wire terminals accept up to #10 solid or stranded wire. Terminal screws backed out. Tamper resistant receptacles have a UL Listed shutter system. 20 amp, 125 volt. Meets all UL 498 requirements. Triple wire line contacts provide excellent long-term plug retention. Arc-resistant thermostat face. Side wire terminals accept up to #10 solid or stranded wire. Terminal screws backed out. Tamper resistant receptacles have a UL Listed shutter system. 20 amp, 125 volt. Meets all UL 498 requirements. Triple wire line contacts provide excellent long-term plug retention. Arc-resistant thermostat face. Side wire terminals accept up to #10 solid or stranded wire. Terminal screws backed out. Tamper resistant receptacles have a UL Listed shutter system. 20 amp, 125 volt.
Legrand NM11 T-Fitting CordMate Legrand NMW11 3-Way T-Fitting Bell Raco 5606 Lampholder
For branching wire channel in two directions at 90 degree angles. For branching wire channel in two directions at 90 degree angles. Die cast zinc with porcelain socket. For wet locations. Use 75-150 watt maximum, Par-38 lamps. Includes gaskets and locknuts. UL Listed.
Bell Raco 5606 Lampholder Hubbell 5606 Adjustable Weatherproof Lampholder Gardner Bender GCC-610 2-Hole Conduit Strap
Die cast zinc with porcelain socket. For wet locations. Use 75-150 watt maximum, Par-38 lamps. Includes gaskets and locknuts. UL Listed. Die cast zinc with porcelain socket. For wet locations. Use 75-150 watt maximum, Par-38 lamps. Includes gaskets and locknuts. UL Listed. Heavy-duty polyethylene, resists deterioration from UV rays and breakage from extreme cold. Enables secure fastening of plastic electrical conduit, schedule 40 PVC, copper tubing.
Legrand NM6 Nonmetallic Raceway Flat Elbow CordMate Legrand NM Raceway Wireway Flat Elbow Bell Raco 5189 Rectangular Cluster Cover
For making 90 degree right or left turns on a flat surface. For making 90 degree right or left turns on a flat surface. Includes installation hardware, gasket, and multi-lingual instructions. 3 hole covers are supplied with two closure plugs. Die cast zinc construction. Three 1/2" NPT holes. UR - Underwrites recognized component CSA C22.2 No. 18 compliant.
Bell Raco 5197-5 Round Cluster Cover Hubbell 5189-6 3-Hole Cluster Lampholder Cover Hubbell 5197-6 3-Hole Cluster Lampholder Cover
For wet locations. Gasket, screws and plugs included. 4" cluster cover. Die cast zinc. Three 1/2" NPT holes. UL Listed. Includes installation hardware, gasket, and multi-lingual instructions. 3 hole covers are supplied with two closure plugs. Die cast zinc construction. Three 1/2" NPT holes. UR - Underwrites recognized component CSA C22.2 No. 18 compliant. For wet locations. Gasket, screws and plugs included. 4" cluster cover. Die cast zinc. Three 1/2" NPT holes. UL Listed.
Bell Raco 5197-7 3-Hole Cluster Round Weatherproof Cover Cooper 7500-Box Decorative Standard Rocker Switch Cooper 7500-Box Decorative Standard Rocker Switch
For wet locations. Gasket, screws and plugs included. 4" cluster cover. Die cast zinc. Three 1/2" NPT holes. UL Listed. Ultrasonic welding and integrated construction of the strap and body. Backwire clamps on the side terminals for installation of #12 and #14 wire. Thermoplastic rocker, top and backbody are virtually unbreakable. Screws accept slotted, Phillips and Robertson head tools for installation in both the U.S. and Canada. Longer, wider strap provides 40 percent more contact area to wall board. Virtually eliminates floating installations. Built-in wire stripper for #12 and #14 wire. Stippled ground screw standard. 15 amp, 120/277 volt AC rating for fluorescent lighting fixtures typical in commercial applications. Push in terminals accept #14 solid wire only. Temperature rating of -20 to 60 degrees C. Meets flammability requirements per UL 94, 6504, V2 rated, VO rated. UL and cUL Listed, Meets all UL20 requirements. Ultrasonic welding and integrated construction of the strap and body. Backwire clamps on the side terminals for installation of #12 and #14 wire. Thermoplastic rocker, top and backbody are virtually unbreakable. Screws accept slotted, Phillips and Robertson head tools for installation in both the U.S. and Canada. Longer, wider strap provides 40 percent more contact area to wall board. Virtually eliminates floating installations. Built-in wire stripper for #12 and #14 wire. Stippled ground screw standard. 15 amp, 120/277 volt AC rating for fluorescent lighting fixtures typical in commercial applications. Push in terminals accept #14 solid wire only. Temperature rating of -20 to 60 degrees C. Meets flammability requirements per UL 94, 6504, V2 rated, VO rated. UL and cUL Listed, Meets all UL20 requirements.
Bell Raco 5606 Adjustable Lampholder Legrand B-8 Metal Raceway Outside Elbow Bell Raco 5606 Lampholder
Die cast zinc with porcelain socket. For wet locations. Use 75-150 watt maximum, Par-38 lamps. Includes gaskets and locknuts. UL Listed. Used to make a 90 degree outside turn around a corner. Die cast zinc with porcelain socket. For wet locations. Use 75-150 watt maximum, Par-38 lamps. Includes gaskets and locknuts. UL Listed.
Hubbell 5606 Adjustable Weatherproof Lampholder Jandorf 61014 Single Electrical Receptacle Jandorf 61015 Single Electrical Receptacle
Die cast zinc with porcelain socket. For wet locations. Use 75-150 watt maximum, Par-38 lamps. Includes gaskets and locknuts. UL Listed. Jandorf Electrical Receptacle, Single, 2 Poles, 2 Wires, 15 A, 125 V, Black, CSA Certified, For Indoor Use Jandorf Electrical Receptacle, Single, 2 Poles, 2 Wires, 15 A, 125 V, White, CSA Certified, For Indoor Use
Halex 26141 Flat Drive Strap Halex 26151 1-Hole Snap-On Conduit Strap Halex 61130 1-Hole Conduit Strap
Indoors or outdoors. To secure EMT conduit to a wood or masonry surface. Indoor or outdoor applications. To support EMT conduit. Steel, indoor or outdoor. Use to secure Rigid or IMC conduit to wood, masonry or similar surfaces where greater load bearing is required. Tray boxed.
Legrand B-6 Metal Raceway Flat Elbow Legrand B-7 Metal Raceway Inside Elbow Arrow Hart 817  Single Receptacle
Used to make a 90 degree right or left turn on a flat surface. Used to make a 90 degree inside turn around a corner, from wall-to-wall or wall-to-ceiling. Meets all UL 498 requirements. Triple wire line contacts provide excellent long-term plug retention. Arc-resistant thermostat face. Side wire terminals accept up to #10 solid or stranded wire. Terminal screws backed out. Tamper resistant receptacles have a UL Listed shutter system. cULus Listed. 15 amp, 125 volt.
Arrow Hart 817W  Single Receptacle Bell Raco 5611-0 Replacement Outer Gasket Arrow Hart 816  Single Receptacle
Meets all UL 498 requirements. Triple wire line contacts provide excellent long-term plug retention. Arc-resistant thermostat face. Side wire terminals accept up to #10 solid or stranded wire. Terminal screws backed out. Tamper resistant receptacles have a UL Listed shutter system. cULus Listed. 15 amp, 125 volt. Replacement gasket for Bell lampholders. UL Standard CSA Certified. Meets all UL 498 requirements. Triple wire line contacts provide excellent long-term plug retention. Arc-resistant thermostat face. Side wire terminals accept up to #10 solid or stranded wire. Terminal screws backed out. 15 amp, 250 volt.
Arrow Hart 816  Single Receptacle Halex 26152 1-Hole Snap-On Conduit Strap Cooper C1303-7V Framed Grounded Toggle Switch
Meets all UL 498 requirements. Triple wire line contacts provide excellent long-term plug retention. Arc-resistant thermostat face. Side wire terminals accept up to #10 solid or stranded wire. Terminal screws backed out. 15 amp, 250 volt. Indoor or outdoor applications. To support EMT conduit. Longer, wider strap provides 40 percent more contact area to wall board. Virtually eliminates floating installations. Unbreakable top and bottom housing. Industrial design cam action mechanism insures quiet switch action. Built-in wire stripper for number 14 and number 12 wire. Built-in wire looper for pre-looping. Double riveted switch. Three way switches feature additional push-in common termination for feed-through tapping. Push-in terminals accept number 14 solid wire only. Side wire terminals accept up to number 10 solid or stranded wire. Combination slot/Phillips and Robertson-head terminal screws. 15 amp, 120 volt. Meets all UL 20 requirements. UL Listed.
Cooper 1301-7 Framed Grounded Toggle Switch Halex 26161 2-Hole Snap-On Conduit Strap Halex 26162 2-Hole Snap-On Conduit Strap
Longer, wider strap provides 40 percent more contact area to wall board. Virtually eliminates floating installations. Unbreakable top and bottom housing. Industrial design cam action mechanism insures quiet switch action. Built-in wire stripper for number 14 and number 12 wire. Built-in wire looper for pre-looping. Double riveted switch. Three way switches feature additional push-in common termination for feed-through tapping. Push-in terminals accept number 14 solid wire only. Side wire terminals accept up to number 10 solid or stranded wire. Combination slot/Phillips and Robertson-head terminal screws. 15 amp, 120 volt. Meets all UL 20 requirements. UL Listed. To support EMT conduit where greater load bearing is required. Indoor or outdoor applications. To support EMT conduit where greater load bearing is required. Indoor or outdoor applications.
CordMate Legrand C10 Wire Channel Jandorf 61016 Single Electrical Receptacle Jandorf 61017 Single Electrical Receptacle
Hides and organizes low voltage loose cords and wires. UL Listed. 1/2" height x 3/8" width x 5' length. Jandorf Electrical Receptacle, Single, 3 Poles, 3 Wires, 15 A, 125 V, Black, CSA Certified, For Indoor Use Jandorf Electrical Receptacle, Single, 3 Poles, 3 Wires, 15 A, 125 V, White, CSA Certified, For Indoor Use
RECEPTACLE SGL LT ALMOND 250V Arrow Hart Eagle CS Lighted Toggle Switch Arrow Hart 1876  Single Receptacle
Straight blade receptacle. Meets all UL and CSA specifications. Triple wire line contacts provide excellent long-term plug retention. High impact and chemical-resistant nylon face. Side wire terminals accept up to #10 solid or stranded wire. Terminal screws backed out. 20 amp, 250 volt. Side wire terminals accept up to number 10 solid or stranded wire. Rated for fluorescent lighting fixtures typical in commercial applications. .050" thick steel mounting strap zinc-plated for corrosion resistance. Ground screw terminal standard. 20 amp, 120/277 volt. Meets all UL 20 requirements, Federal Specifications WS 896. Straight blade receptacle. Meets all UL and CSA specifications. Triple wire line contacts provide excellent long-term plug retention. High impact and chemical-resistant nylon face. Side wire terminals accept up to #10 solid or stranded wire. Terminal screws backed out. 20 amp, 250 volt.
Arrow Hart 1876  Single Receptacle Arrow Hart 1876W Grounded  Single Receptacle Halex 26142 Flat Drive Strap
Straight blade receptacle. Meets all UL and CSA specifications. Triple wire line contacts provide excellent long-term plug retention. High impact and chemical-resistant nylon face. Side wire terminals accept up to #10 solid or stranded wire. Terminal screws backed out. 20 amp, 250 volt. Straight blade receptacle. Meets all UL and CSA specifications. Triple wire line contacts provide excellent long-term plug retention. High impact and chemical-resistant nylon face. Side wire terminals accept up to #10 solid or stranded wire. Terminal screws backed out. 20 amp, 250 volt. Indoors or outdoors. To secure EMT conduit to a wood or masonry surface.
Diva D-600RH-DK Turn-To-On Rotary Dimmer Legrand NMW17 Raceway Conduit Connector Wiremold Raceway On-Wall Mount Conduit Connector
Includes 2 changeable control knobs, one ivory and one white to match either color wall plate, (wall plate sold separately). Rotate to select light level, rotary on/off. Rated at 120 volt, 60Hz, works with 120 volt incandescents and halogens. 600 watt maximum capacity. UL/CSA Listed. For transitioning from nonmetallic raceway to conduit. Hides and organizes loose cords and wires. For transitioning from nonmetallic raceway to conduit. Hides and organizes loose cords and wires.
Arrow Hart CSB GRD Pro Toggle Switch Arrow Hart CSB GRD Pro Toggle Switch Diva Traditional D-600PH-DK Push-On Rotary Dimmer
Small toggle switch blends with standard grade toggles. Larger contacts, backwire clamps on the side terminals. Side wire terminals accept up to number 10 solid wire. Back wire terminal accepts 12 or 14 gauge wire. Heavy duty cam action mechanism. Long, broad steel mounting strap, zinc-plated for corrosion resistance. Built-in wire stripper for number 12 and number 14 wire. Ground screw terminal, stippled line and ground contacts standard. Tri-Combo head mounting and terminal screws. 15 amp, 120/277 volt. cULus Listed, NOM certified. Small toggle switch blends with standard grade toggles. Larger contacts, backwire clamps on the side terminals. Side wire terminals accept up to number 10 solid wire. Back wire terminal accepts 12 or 14 gauge wire. Heavy duty cam action mechanism. Long, broad steel mounting strap, zinc-plated for corrosion resistance. Built-in wire stripper for number 12 and number 14 wire. Ground screw terminal, stippled line and ground contacts standard. Tri-Combo head mounting and terminal screws. 15 amp, 120/277 volt. cULus Listed, NOM certified. Includes 2 changeable control knobs, one ivory and one white to match either color wall plate, (wall plate sold separately). Rotate to select light level, push on/off. 3-way dimmers require 3-way switches. Rated at 120 volt AC, 60Hz, works with 120 volt incandescents and halogens. 600 watt maximum capacity. UL and CSA Listed.
Carlon E977DC25-UPC Conduit Clamp Thomas & Betts E977NDC-CTN 1-Piece Conduit Clamp Cooper TR817W-BOX Tamper Resistant Single Receptacle
Offers same chemical resistance as Carlon nonmetallic conduit for a complete, corrosion resistant system. UV resistant for use in direct sunlight. Use in accordance with conduit spacing requirements per NEC. Each clamp requires 2 screws, 2 nuts, and 2 washers. Gray clamps for standard conduit. Drill  5/16'' hole with masonry bit and tap in with hammer. Meets all UL 498 requirements. Triple wire line contacts provide excellent long-term plug retention. Arc-resistant thermostat face. Side wire terminals accept up to #10 solid or stranded wire. Terminal screws backed out. Tamper resistant receptacles have a UL Listed shutter system. cULus Listed. 15 amp, 125 volt.
Cooper TR817V-BOX Tamper Resistant Single Receptacle Thomas & Betts E977NEC-CTN 1-Piece Conduit Clamp Cooper TR1877W-BXSP Tamper Resistant Single Receptacle
Meets all UL 498 requirements. Triple wire line contacts provide excellent long-term plug retention. Arc-resistant thermostat face. Side wire terminals accept up to #10 solid or stranded wire. Terminal screws backed out. Tamper resistant receptacles have a UL Listed shutter system. cULus Listed. 15 amp, 125 volt. Drill  5/16'' hole with masonry bit and tap in with hammer. Meets all UL 498 requirements. Triple wire line contacts provide excellent long-term plug retention. Arc-resistant thermostat face. Side wire terminals accept up to #10 solid or stranded wire. Terminal screws backed out. Tamper resistant receptacles have a UL Listed shutter system. 20 amp, 125 volt.
Cooper TR1877V-BXSP Tamper Resistant Single Receptacle Legrand Despard ACD3I Special Purpose Toggle Switch Legrand B-1 Wire Channel
Meets all UL 498 requirements. Triple wire line contacts provide excellent long-term plug retention. Arc-resistant thermostat face. Side wire terminals accept up to #10 solid or stranded wire. Terminal screws backed out. Tamper resistant receptacles have a UL Listed shutter system. 20 amp, 125 volt. Older style device with a rounded shape that is slightly flattened top and bottom. Flexible, smaller than a standard device, fits in a smaller opening. Used in locations with limited space or restricted options. UL Listed, conforms to NEMA specifications. Metal surface mount, for wall or ceiling use. 5' length x 3/4" height x 17/32" width. Use to protect cords.
Arrow Hart CS Compact Toggle Switch Arrow Hart CS Grounded Compact Toggle Switch Arrow Hart CS Grounded Compact Toggle Switch
Side wire terminals accept up to number 10 solid or stranded wire. Rated for fluorescent lighting fixtures typical in commercial applications. 0.050" thick steel mounting strap zinc-plated for corrosion resistance. Ground screw terminal standard. Meets all UL 20 requirements, Federal specifications WS896. Side wire terminals accept up to number 10 solid or stranded wire. Rated for fluorescent lighting fixtures typical in commercial applications. 0.050" thick steel mounting strap zinc-plated for corrosion resistance. Ground screw terminal standard. Meets all UL 20 requirements, Federal specifications WS896. Side wire terminals accept up to number 10 solid or stranded wire. Rated for fluorescent lighting fixtures typical in commercial applications. 0.050" thick steel mounting strap zinc-plated for corrosion resistance. Ground screw terminal standard. Meets all UL 20 requirements, Federal specifications WS896.
Legrand NM Outlet Box Carlon E977EC20-UPC Conduit Clamp Wiremold NMW2 Starter Box
Fits over existing single gang outlet to feed power as the starting point for your system. 1" deep. Offers same chemical resistance as Carlon nonmetallic conduit for a complete, corrosion resistant system. UV resistant for use in direct sunlight. Use in accordance with conduit spacing requirements per NEC. Each clamp requires 2 screws, 2 nuts, and 2 washers. Gray clamps for standard conduit. Fits over existing single gang outlet to feed power as the starting point for your system. 1" deep.
Wiremold B81 Metal Raceway Box Connector Legrand B-16 T-Fitting AmerTac Zenith VT1006COMPOS Composite Audio Video Cable
For connecting raceway to conduit boxes with 1/2" knockout. Hides and organizes loose cords and wires. Reliable audio/video connection between components. Color coded connectors.
Core React RI061-VW-K2 Non-Preset Rotary Dimmer Legrand CordMate II C53 Datacom Box Legrand NM Deep Outlet Box
For both residential and commercial use. Stylized knob provides dimming, on/off control and indication of light level setting. 6" prestripped wire leads. Ground lead provided. Wraparound heat sink dissipates heat and does not require de-rating. 120 volt AC, 60 Hz. UL Listed. For mounting phone, fax, cable and audio connections (not for power). Paintable with a latex base paint. Simple to use, just peel off self-adhesive backing. For installing dimmer switches as well as standard size switches and outlets. 1-7/16" length x 1-3/8" depth.
Wiremold NMW3 Outlet Box AmerTac Zenith VV1006SVID Type S Video Cable Core Aspire 9503DS Rocker Switch
For installing dimmer switches as well as standard size switches and outlets. 1-7/16" length x 1-3/8" depth. S-video black cable. Transfers video signals between components. For use with satellite receivers, cable boxes, DVD players, and video recorders. Curved profile rocker, accented by the color and texture of its surrounding frame, with two-tone elegance. Virtually unbreakable, ultrasonically welded top and backbody; extra-long, extra-wide mounting straps; #14 push-in terminals; backwire clamps on side terminals; easy-access ground screws and built-in wire strippers. 15 amp, 120/277 volt.
Legrand NMW Extra Deep Outlet Box Legrand NM Extra Deep Outlet Box Halex 61212B 2-Hole Conduit Strap
For installing speed controls for ceiling fans dimmer switches, standard switches and outlets. 1-3/4" deep. For installing speed controls for ceiling fans dimmer switches, standard switches and outlets. 1-3/4" deep. Indoor or outdoor use. Use to secure Rigid or IMC conduit to wood, masonry or similar surfaces where greater load bearing is required. UL Listed, CSA Approved.
Core Aspire 9503SG Rocker Switch Core Aspire 9503WS Rocker Switch Legrand B5 Starter Box
Curved profile rocker, accented by the color and texture of its surrounding frame, with two-tone elegance. Virtually unbreakable, ultrasonically welded top and backbody; extra-long, extra-wide mounting straps; #14 push-in terminals; backwire clamps on side terminals; easy-access ground screws and built-in wire strippers. 15 amp, 120/277 volt. Curved profile rocker, accented by the color and texture of its surrounding frame, with two-tone elegance. Virtually unbreakable, ultrasonically welded top and backbody; extra-long, extra-wide mounting straps; #14 push-in terminals; backwire clamps on side terminals; easy-access ground screws and built-in wire strippers. 15 amp, 120/277 volt. For installing speed controls for ceiling fans dimmer switches, standard switches and outlets. 1" deep.
Wiremold B-17 Raceway Combination Connector Wiremold B-9-10-11 Wire Channel Accessories Bell Raco 5624 Combination Weatherproof Lampholder
Metal raceway. For transitioning from metal raceway to 1/2" conduit or from any steel box with 1/2" knockout. Use to provide easy access to connections. Die cast zinc round 4" cover and lampholder combination. Powder coat finish, scratch-resistant. For wet locations. Includes installation hardware, gasket, and multi-lingual instructions. Uses 75-150 watt maximum, Par-38 lamps, not included. UL Listed 1598 C/UL.
Bell Raco 5624-1 Combination Weatherproof Lampholder Legrand NMW2S Switch Kit Wiremold NMW2D Outlet Box Duplex Switch
Die cast zinc round 4" cover and lampholder combination. Powder coat finish, scratch-resistant. For wet locations. Includes installation hardware, gasket, and multi-lingual instructions. Uses 75-150 watt maximum, Par-38 lamps, not included. UL Listed 1598 C/UL. For most residential wiring. For most residential wiring.
Halex 61205B 2-Hole Conduit Strap Arrow Hart Eagle CS Toggle Switch Arrow Hart Eagle CS Lighted Toggle Switch
Indoor or outdoor use. Use to secure Rigid or IMC conduit to wood, masonry or similar surfaces where greater load bearing is required. UL Listed, CSA Approved. Side wire terminals accept up to number 10 solid or stranded wire. Rated for fluorescent lighting fixtures typical in commercial applications. .050" thick steel mounting strap zinc-plated for corrosion resistance. Ground screw terminal standard. 20 amp, 120/277 volt. Meets all UL 20 requirements, Federal Specifications WS 896. Side wire terminals accept up to number 10 solid or stranded wire. Rated for fluorescent lighting fixtures typical in commercial applications. .050" thick steel mounting strap zinc-plated for corrosion resistance. Ground screw terminal standard. 20 amp, 120/277 volt. Meets all UL 20 requirements, Federal Specifications WS 896.
Legrand B2 Deep Outlet Box Legrand NMW1 Raceway Wire Channel Bell Raco 5624-6 Combination Weatherproof Lampholder
For most residential wiring devices. For installing a shallow switch or outlet. 1" deep. Carries wire from starter box to downstream outlet boxes, switches and fixtures. 5' length x 1-5/16" width x 7/16" height. Die cast zinc round 4" cover and lampholder combination. Powder coat finish, scratch-resistant. For wet locations. Includes installation hardware, gasket, and multi-lingual instructions. Uses 75-150 watt maximum, Par-38 lamps, not included. UL Listed 1598 C/UL.
Hubbell 5624 Weatherproof Combination Lampholder Halex 61615B 2-Hole Snap-On Conduit Strap Legrand NM1 Nonmetallic Raceway Wire Channel
Die cast zinc round 4" cover and lampholder combination. Powder coat finish, scratch-resistant. For wet locations. Includes installation hardware, gasket, and multi-lingual instructions. Uses 75-150 watt maximum, Par-38 lamps, not included. UL Listed 1598 C/UL. To support EMT conduit where greater load bearing is required. Indoor or outdoor applications. Carries wire from starter box to downstream outlet boxes, switches and fixtures. 5' length x 1-5/16" width x 7/16" height.
Arrow Hart Eagle CS Toggle Switch Arrow Hart CS Compact Toggle Switch Arrow Hart CS Compact Toggle Switch
Side wire terminals accept up to number 10 solid or stranded wire. Rated for fluorescent lighting fixtures typical in commercial applications. .050" thick steel mounting strap zinc-plated for corrosion resistance. Ground screw terminal standard. 20 amp, 120/277 volt. Meets all UL 20 requirements, Federal Specifications WS 896. Side wire terminals accept up to number 10 solid or stranded wire. Rated for fluorescent lighting fixtures typical in commercial applications. .050" thick steel mounting strap zinc-plated for corrosion resistance. Ground screw terminal standard. 20 amp, 120/277 volt. Meets all UL 20 requirements, Federal Specifications WS 896. Side wire terminals accept up to number 10 solid or stranded wire. Rated for fluorescent lighting fixtures typical in commercial applications. .050" thick steel mounting strap zinc-plated for corrosion resistance. Ground screw terminal standard. 20 amp, 120/277 volt. Meets all UL 20 requirements, Federal Specifications WS 896.
Lutron D-603PH-DK Push-On/Off Rotary Dimmer Legrand B3 Deep Outlet Box Cooper 5223-7 Grounded Standard Toggle Switch
Includes 2 changeable control knobs, one ivory and one white to match either color wall plate, (wall plate sold separately). Rotate to select light level, push on/off. 3-way dimmers require 3-way switches. Rated at 120 volt AC, 60Hz, works with 120 volt incandescents and halogens. 600 watt maximum capacity. UL and CSA Listed. For installing a deep-dimensioned box for dimmers, speed control switches and other devices. 1-3/8" deep. Meets all UL 20 requirements. For direct connection to aluminum or copper wire. Longer, wider strap provides 40 percent more contact area to wall board. Virtually eliminates floating installations. Industrial design cam action mechanism insures quiet switch action. Side wire terminals accept up to #10 solid or stranded wire. Terminal screws are backed out-ready for wiring. Combination slot/Phillips head mounting and terminal screws. 15 amp, 120 volt. UL Listed.
Cooper 5223-7 Standard Toggle Switch Legrand B2S Switch Kit Wiremold B2D Outlet Box Duplex Switch
Meets all UL 20 requirements. For direct connection to aluminum or copper wire. Longer, wider strap provides 40 percent more contact area to wall board. Virtually eliminates floating installations. Industrial design cam action mechanism insures quiet switch action. Side wire terminals accept up to #10 solid or stranded wire. Terminal screws are backed out-ready for wiring. Combination slot/Phillips head mounting and terminal screws. 15 amp, 120 volt. UL Listed. For most residential wiring. For most residential wiring.
Cooper RI306P-VW-K2 Preset Rotary Dimmer