Home > ELECTRICAL > SPECIALTY ELECTRICAL > AUDIO & VIDEO SUPPLIES > ANTENNAS
Sort By:
1
Carlon A240D-CAR 1-Piece Conduit Coupling Halex 96560 Beam Clamp Carlon A243D-CAR 1-Piece Snap-In Conduit Adapter
Quick connect, fold and snap together. No cement, set screws or lock nuts. For 600 volt use in ceilings, floors and walls in residential, commercial and industrial buildings not more than three floors above grade. Colored in brilliant electric blue. For indoor use. Concrete tight when used with Carlon ENT. UL Listed. Use to secure conduit to a metal beam. Clamps on beam, girder or similar structure to provide a mounting base for attachment of a conduit hanger, either directly or by means of a threaded rod. Eliminates need to drill hole through beam. Innovative one piece quick connect design for fast and easy installation. Suitable for damp locations. No glue or cement needed. Carlon Standard Blue. Concrete tight when used with appropriate ENT.
Carlon A253E-CAR 1-Piece Snap-In Terminal Adapter Carlon A253D-CAR 1-Piece Snap-In Terminal Adapter Carlon A240E-CAR 1-Piece Conduit Coupling
Fold and snap together. No cement, set screws or lock nuts. For 600 volt use in ceilings, floors and walls in residential, commercial and industrial buildings not more than three floors above grade. Colored in brilliant electric blue. For indoor use. Concrete tight when used with Carlon ENT. UL Listed. Fold and snap together. No cement, set screws or lock nuts. For 600 volt use in ceilings, floors and walls in residential, commercial and industrial buildings not more than three floors above grade. Colored in brilliant electric blue. For indoor use. Concrete tight when used with Carlon ENT. UL Listed. Quick connect, fold and snap together. No cement, set screws or lock nuts. For 600 volt use in ceilings, floors and walls in residential, commercial and industrial buildings not more than three floors above grade. Colored in brilliant electric blue. For indoor use. Concrete tight when used with Carlon ENT. UL Listed.
Carlon A243E-CAR 1-Piece Snap-In Conduit Adapter Thomas And Betts Z703 1/2-25 Superstrut Halex 16010B Ground Clamp
Innovative one piece quick connect design for fast and easy installation. Suitable for damp locations. No glue or cement needed. Carlon Standard Blue. Concrete tight when used with appropriate ENT. Pipe straps hold conduit and pipes in channel. They are inserted along the slot side of the channel and twisted into place. Pre-assembled with locking slot / hex head bolt. Gold-galvanized corrosion free finish. Indoor or outdoor applications. Use to secure the grounding wire to a 1/2" through 1" pipe. UL Listed. Wire size fits #10 - #2 AWG.
Superstrut 200 Series Angle Bracket Fitting Thomas And Betts Z703 3/4-25 Superstrut Thomas And Betts Z703 1 1/4-10 Superstrut
For use in metal framing applications. Manufactured from hot rolled carbon steel. Pipe straps hold conduit and pipes in channel. They are inserted along the slot side of the channel and twisted into place. Pre-assembled with locking slot / hex head bolt. Gold-galvanized corrosion free finish. Pipe straps hold conduit and pipes in channel. They are inserted along the slot side of the channel and twisted into place. Pre-assembled with locking slot / hex head bolt. Gold-galvanized corrosion free finish.
Superstrut 200 Flat Straight Bracket Splice Plate 7-1/4 in L Gardner Bender GGS-1512R Ground Screw Thomas And Betts Z703 1-25
Splices and supports conduit. Green round washer head screw for switch and outlet boxes. Pipe straps hold conduit and pipes in channel. They are inserted along the slot side of the channel and twisted into place. Pre-assembled with locking slot / hex head bolt. Gold-galvanized corrosion free finish.
Thomas And Betts Z702 21/2EG-10 Superstrut Pipe Clamp Thomas And Betts Z500-25 Superstrut Beam Clamp Superstrut 200 Series Angle Bracket Fitting
Pipe straps hold conduit and pipes in channel. They are inserted along the slot side of the channel and twisted into place. Pre-assembled with locking slot / hex head bolt. For hanging rod, silver electroplated finish. For use in metal framing applications. Manufactured from hot rolled carbon steel.
Thomas And Betts Z703 1 1/2-10 Superstrut Eritech CP58 Acorn Standard Duty Ground Clamp Thomas And Betts Z702 3EG-10 Superstrut
Pipe straps hold conduit and pipes in channel. They are inserted along the slot side of the channel and twisted into place. Pre-assembled with locking slot / hex head bolt. Gold-galvanized corrosion free finish. Connects grounding wire to the grounding rod. UL and CSA Listed for 1/2" and 5/8" ground rods and number 4 rebar and accept a conductor range from number 10 solid to number 2 stranded. Pipe straps hold conduit and pipes in channel. They are inserted along the slot side of the channel and twisted into place. Pre-assembled with locking slot / hex head bolt.
Halex 93591 Ground Clamp Gardner Bender GGC-1508 Ground Clip Eritech ZWP1J Grounding Pipe Clamp
Connects grounding wire to the grounding rod. For aluminum or copper grounding wire zinc plated. Bolted water pipe clamps made of zinc die-cast. Wire range 8 sol. - 2 str. UL Listed. Connects grounding wire to the grounding rod.
Gardner Bender GMC-88M5 Modular Electrical Plug AmerTac 935RW Wall Plate AmerTac 935RAL Wall Plate
Use with network/twisted pair cable CAT-5E, 8-position, 8-contact, rounded cable, solid wire. With screws. 5" height x 2-3/4" width x 1/4" depth. With screws. 5" height x 2-3/4" width x 1/4" depth.
Gardner Bender GGP-1502 Grounding Pigtail Superstrut 200 Flat Right Angle Bracket Corner Plate Superstrut 200 Series Flat Straight Bracket
AWG solid number 12 wire. 8" long with captured screw, other end bare fork terminal. Splices and supports conduit. Splices and supports conduit.
Gardner Bender 14-GRC Ground Clamp Fishock GRC-FS Ground Clamp Halex 36010 Ground Clamp
Connects grounding wire to the grounding rod. Helps to make a superior connection of ground wire to ground rod. Heavy duty construction for long usage. Indoor or outdoor applications. Use to secure the grounding wire to a 1/2" through 1" pipe. UL Listed. Wire size fits #10 - #2 AWG.
Superstrut ZCM1001/4-10 Cone Nut Carlon Z703 2 Pipe Clamp Eritech CWP1J Grounding Pipe Clamp
Superstrut Cone Nut, 1/4 in Nominal, Nylon Cone, Steel Nut, Galvanized, Gold, For Superstrut Metal Framing and Hanger System Pipe straps hold conduit and pipes in channel. They are inserted along the slot side of the channel and twisted into place. Pre-assembled with locking slot / hex head bolt. Gold-galvanized corrosion free finish. Bolted water pipe grounding clamp. UL listed. Made of corrosion-resistant copper alloy.
Cooper 7500-Box Decorative Standard Rocker Switch Cooper 7500-Box Decorative Standard Rocker Switch Thomas And Betts ZA1001/4EG-10 Superstrut
Ultrasonic welding and integrated construction of the strap and body. Backwire clamps on the side terminals for installation of #12 and #14 wire. Thermoplastic rocker, top and backbody are virtually unbreakable. Screws accept slotted, Phillips and Robertson head tools for installation in both the U.S. and Canada. Longer, wider strap provides 40 percent more contact area to wall board. Virtually eliminates floating installations. Built-in wire stripper for #12 and #14 wire. Stippled ground screw standard. 15 amp, 120/277 volt AC rating for fluorescent lighting fixtures typical in commercial applications. Push in terminals accept #14 solid wire only. Temperature rating of -20 to 60 degrees C. Meets flammability requirements per UL 94, 6504, V2 rated, VO rated. UL and cUL Listed, Meets all UL20 requirements. Ultrasonic welding and integrated construction of the strap and body. Backwire clamps on the side terminals for installation of #12 and #14 wire. Thermoplastic rocker, top and backbody are virtually unbreakable. Screws accept slotted, Phillips and Robertson head tools for installation in both the U.S. and Canada. Longer, wider strap provides 40 percent more contact area to wall board. Virtually eliminates floating installations. Built-in wire stripper for #12 and #14 wire. Stippled ground screw standard. 15 amp, 120/277 volt AC rating for fluorescent lighting fixtures typical in commercial applications. Push in terminals accept #14 solid wire only. Temperature rating of -20 to 60 degrees C. Meets flammability requirements per UL 94, 6504, V2 rated, VO rated. UL and cUL Listed, Meets all UL20 requirements. For use with 'A' and 'C' series channel and inserts.
Thomas And Betts Z502-10 Superstrut Beam Clamp Gardner Bender GMC-88C6 Modular Electrical Plug Halex 93592 Ground Clamp
For hanging rod, silver electroplated finish. Use with network/twisted pair cable CAT-6, 8-position, 8-contact, rounded cable, solid wire. Connects grounding wire to the grounding rod.
Thomas And Betts ZA1003/8EG-10 Superstrut Thomas And Betts ZU501-10 Superstrut Beam Clamp Cooper C1303-7V Framed Grounded Toggle Switch
For use with 'A' and 'C' series channel and inserts. For channel. 3-1/16". Longer, wider strap provides 40 percent more contact area to wall board. Virtually eliminates floating installations. Unbreakable top and bottom housing. Industrial design cam action mechanism insures quiet switch action. Built-in wire stripper for number 14 and number 12 wire. Built-in wire looper for pre-looping. Double riveted switch. Three way switches feature additional push-in common termination for feed-through tapping. Push-in terminals accept number 14 solid wire only. Side wire terminals accept up to number 10 solid or stranded wire. Combination slot/Phillips and Robertson-head terminal screws. 15 amp, 120 volt. Meets all UL 20 requirements. UL Listed.
Cooper 1301-7 Framed Grounded Toggle Switch AmerTac Amerelle Traditional 161RR Square Corner Wall Plate AmerTac Traditional 161R Decorative Square Corner Wall Plate
Longer, wider strap provides 40 percent more contact area to wall board. Virtually eliminates floating installations. Unbreakable top and bottom housing. Industrial design cam action mechanism insures quiet switch action. Built-in wire stripper for number 14 and number 12 wire. Built-in wire looper for pre-looping. Double riveted switch. Three way switches feature additional push-in common termination for feed-through tapping. Push-in terminals accept number 14 solid wire only. Side wire terminals accept up to number 10 solid or stranded wire. Combination slot/Phillips and Robertson-head terminal screws. 15 amp, 120 volt. Meets all UL 20 requirements. UL Listed. Traditional square corner design. With screws. 5" height x 4-5/8" width x 1/4" depth. Traditional square corner design. With screws. 5" height x 2-7/8" width x 1/4" depth.
AmerTac Traditional 163RBR Decorative Square Corner Wall Plate Thomas And Betts ZA1001/2EG-10 Superstrut Steel City ZCK535-10 Armored Cable Hanger Clip
Traditional square corner design. With screws. For use with 'A' and 'C' series channel and inserts. Flexible conduit hanger from drop wire, #8-#12 wire, .433-.535 O.D. cable.
Superstrut 200 Series Square Conduit Washer Halex 36019 Ground Clamp Superstrut 200 Series Square Conduit Washer
GoldGalv finish. Indoor or outdoor applications. Use to secure the grounding wire to a 1/2" through 1" pipe. UL Listed. Wire size fits #10 - #2 AWG. GoldGalv finish.
AmerTac Zenith PN10075EB CAT5E Network Cable Arrow Hart Eagle CS Lighted Toggle Switch Amerelle Century 1-Rocker Wall Plate
Connects computer to hub or RJ45 wall jack. Black cable. Side wire terminals accept up to number 10 solid or stranded wire. Rated for fluorescent lighting fixtures typical in commercial applications. .050" thick steel mounting strap zinc-plated for corrosion resistance. Ground screw terminal standard. 20 amp, 120/277 volt. Meets all UL 20 requirements, Federal Specifications WS 896. Amerelle Wall Plate, 1-Rocker, Series: Century, 4-15/16 in Length, 2-7/8 in Width, 1 Gangs, Stamped Steel, Brushed Nickel, Screw Mounting, Includes: Matching Screws, UL Listed
Steel City R Threaded Rod Eritech CWP1JU Grounding Pipe Clamp Arrow Hart CSB GRD Pro Toggle Switch
Framing and hanging applications. Free-running, corrosion resistant, burr-free. Bolted water pipe clamps made from high-strength corrosion-resistant copper alloy. Connects grounding wire to the grounding rod. Range 10 solid - 2 stranded. UL Listed. Small toggle switch blends with standard grade toggles. Larger contacts, backwire clamps on the side terminals. Side wire terminals accept up to number 10 solid wire. Back wire terminal accepts 12 or 14 gauge wire. Heavy duty cam action mechanism. Long, broad steel mounting strap, zinc-plated for corrosion resistance. Built-in wire stripper for number 12 and number 14 wire. Ground screw terminal, stippled line and ground contacts standard. Tri-Combo head mounting and terminal screws. 15 amp, 120/277 volt. cULus Listed, NOM certified.
Arrow Hart CSB GRD Pro Toggle Switch Superstrut ZCM1003/8-10 Cone Nut Arrow Hart 32B Non-Grounded  Electrical Receptacle
Small toggle switch blends with standard grade toggles. Larger contacts, backwire clamps on the side terminals. Side wire terminals accept up to number 10 solid wire. Back wire terminal accepts 12 or 14 gauge wire. Heavy duty cam action mechanism. Long, broad steel mounting strap, zinc-plated for corrosion resistance. Built-in wire stripper for number 12 and number 14 wire. Ground screw terminal, stippled line and ground contacts standard. Tri-Combo head mounting and terminal screws. 15 amp, 120/277 volt. cULus Listed, NOM certified. Superstrut Cone Nut, 3/8 in Nominal, Nylon Cone, Steel Nut, Galvanized, Gold, For Superstrut Metal Framing and Hanger System Flush mount, range and dryer. Meets all UL 498 requirements. Heavy gauge steel mounting strap, zinc plated for corrosion resistance. For use with copper or aluminum wire, 75 degrees Celsius rated terminals. Fits one or two gang enclosures. NEMA 10-50.
Arrow Hart 38B Non-Grounded  Electrical Receptacle Thomas And Betts Z503-5 Superstrut Beam Clamp Legrand Despard ACD3I Special Purpose Toggle Switch
Flush mount, range and dryer. Meets all UL 498 requirements. Heavy gauge steel mounting strap, zinc plated for corrosion resistance. For use with copper or aluminum wire, 75 degrees Celsius rated terminals. Fits one or two gang enclosures. NEMA 10-30. For hanging rod, silver electroplated finish. Older style device with a rounded shape that is slightly flattened top and bottom. Flexible, smaller than a standard device, fits in a smaller opening. Used in locations with limited space or restricted options. UL Listed, conforms to NEMA specifications.
Superstrut ZCM1001/2-10 Cone Nut Arrow Hart CS Compact Toggle Switch Arrow Hart CS Grounded Compact Toggle Switch
Superstrut Cone Nut, 1/2 in Nominal, Nylon Cone, Steel Nut, Galvanized, Gold, For Superstrut Metal Framing and Hanger System Side wire terminals accept up to number 10 solid or stranded wire. Rated for fluorescent lighting fixtures typical in commercial applications. 0.050" thick steel mounting strap zinc-plated for corrosion resistance. Ground screw terminal standard. Meets all UL 20 requirements, Federal specifications WS896. Side wire terminals accept up to number 10 solid or stranded wire. Rated for fluorescent lighting fixtures typical in commercial applications. 0.050" thick steel mounting strap zinc-plated for corrosion resistance. Ground screw terminal standard. Meets all UL 20 requirements, Federal specifications WS896.
Arrow Hart CS Grounded Compact Toggle Switch Amerelle Century 2-Rocker Wall Plate Halex 63299 Ground Screw
Side wire terminals accept up to number 10 solid or stranded wire. Rated for fluorescent lighting fixtures typical in commercial applications. 0.050" thick steel mounting strap zinc-plated for corrosion resistance. Ground screw terminal standard. Meets all UL 20 requirements, Federal specifications WS896. Amerelle Wall Plate, 2-Rocker, Series: Century, 4-15/16 in Length, 4-9/16 in Width, 2 Gangs, Stamped Steel, Brushed Nickel, Screw Mounting, Includes: Matching Screws, UL Listed Indoor or outdoor applications. Use to ground a wiring device to a steel outlet box. Green color.
AmerTac Zenith PN10145EB CAT5E Network Cable Steel City R Threaded Rod Core Aspire 9503DS Rocker Switch
Connects computer to hub or RJ45 wall jack. Black cable. Framing and hanging applications. Free-running, corrosion resistant, burr-free. Curved profile rocker, accented by the color and texture of its surrounding frame, with two-tone elegance. Virtually unbreakable, ultrasonically welded top and backbody; extra-long, extra-wide mounting straps; #14 push-in terminals; backwire clamps on side terminals; easy-access ground screws and built-in wire strippers. 15 amp, 120/277 volt.
Core Aspire 9503SG Rocker Switch Core Aspire 9503WS Rocker Switch Amerelle Metro Line 1-Rocker Wall Plate
Curved profile rocker, accented by the color and texture of its surrounding frame, with two-tone elegance. Virtually unbreakable, ultrasonically welded top and backbody; extra-long, extra-wide mounting straps; #14 push-in terminals; backwire clamps on side terminals; easy-access ground screws and built-in wire strippers. 15 amp, 120/277 volt. Curved profile rocker, accented by the color and texture of its surrounding frame, with two-tone elegance. Virtually unbreakable, ultrasonically welded top and backbody; extra-long, extra-wide mounting straps; #14 push-in terminals; backwire clamps on side terminals; easy-access ground screws and built-in wire strippers. 15 amp, 120/277 volt. Amerelle Wall Plate, 1-Rocker, Series: Metro Line, 4-7/8 in Length, 3 in Width, 1 Gangs, Cast Metal, Brushed Nickel, Screw Mounting, Includes: Matching Screws, UL Listed
AmerTac Amerelle Studio 61RCH Decorative Rectangular Wall Plate Eritech 811260UPC Grounding Rod Eritech EK17 Direct Burial Perpendicular Ground Clamp
With screws. 5-1/8" height x 3-1/5" width x 3/8" depth. Zinc-coated exteriors are hot-dip galvanized for solid protection against corrosion in accordance with ASTM specification A153-78. Surfaces are rigidly inspected to eliminate seams, slivers and other defects. Meet EEI-NEMA TDJ-30 and are REA listed. 15 year service life in most soils. Galvanized plated steel. Bronze alloy grounding clamp with bronze screws. Used for rebar, ground rods, water pipes and direct-burial water pipe. Lay-in feature cuts installation time. Approved for direct burial in earth and concrete. Pipe range from 1/2" (12.7 mm) to 1" (25.4 mm). Rebar range from #4 (10 mm) to #8 (25 mm). Ground rod range from 1/2" (12.7 mm) to 1" (25.4 mm). Conductor range from #10 (5.5 mm sq) to #2 (25 mm sq). UL listed.
Eritech EK16 Direct Burial Ground Clamp Amerelle Chelsea 1-Rocker Wall Plate Amerelle 1-Rocker Wall Plate
Bronze alloy grounding clamp with bronze screws. Used for rebar, ground rods, water pipes and direct-burial water pipe. Lay-in feature cuts installation time. Approved for direct burial in earth and concrete. Pipe range from 1/2" (12.7 mm) to 1" (25.4 mm). Rebar range from #4 (10 mm) to #8 (25 mm). Ground rod range from 1/2" (12.7 mm) to 1" (25.4 mm). Conductor range from #10 (5.5 mm sq) to #2 (25 mm sq). UL listed. Amerelle Wall Plate, 1-Rocker, Series: Chelsea, 4-7/8 in Length, 3-1/8 in Width, 1 Gangs, Stamped Steel, Brushed Nickel, Screw Mounting, Includes: Matching Screws, UL Listed Amerelle Wall Plate, 1-Rocker, Series: Contemporary, 5-1/4 in Length, 3 in Width, 1 Gangs, Ash Wood, Unfinished, Screw Mounting, Includes: Matching Screws, UL Listed
Halex 36020 Ground Clamp Arrow Hart Eagle CS Toggle Switch Arrow Hart Eagle CS Lighted Toggle Switch
Wire size fits #10 - #2 AWG. Use to secure the grounding wire to a 1-1/4" - 2" or 2-1/2" - 4" pipe. Bronze. UL Listed. Side wire terminals accept up to number 10 solid or stranded wire. Rated for fluorescent lighting fixtures typical in commercial applications. .050" thick steel mounting strap zinc-plated for corrosion resistance. Ground screw terminal standard. 20 amp, 120/277 volt. Meets all UL 20 requirements, Federal Specifications WS 896. Side wire terminals accept up to number 10 solid or stranded wire. Rated for fluorescent lighting fixtures typical in commercial applications. .050" thick steel mounting strap zinc-plated for corrosion resistance. Ground screw terminal standard. 20 amp, 120/277 volt. Meets all UL 20 requirements, Federal Specifications WS 896.
Arrow Hart Eagle CS Toggle Switch Arrow Hart CS Compact Toggle Switch Arrow Hart CS Compact Toggle Switch
Side wire terminals accept up to number 10 solid or stranded wire. Rated for fluorescent lighting fixtures typical in commercial applications. .050" thick steel mounting strap zinc-plated for corrosion resistance. Ground screw terminal standard. 20 amp, 120/277 volt. Meets all UL 20 requirements, Federal Specifications WS 896. Side wire terminals accept up to number 10 solid or stranded wire. Rated for fluorescent lighting fixtures typical in commercial applications. .050" thick steel mounting strap zinc-plated for corrosion resistance. Ground screw terminal standard. 20 amp, 120/277 volt. Meets all UL 20 requirements, Federal Specifications WS 896. Side wire terminals accept up to number 10 solid or stranded wire. Rated for fluorescent lighting fixtures typical in commercial applications. .050" thick steel mounting strap zinc-plated for corrosion resistance. Ground screw terminal standard. 20 amp, 120/277 volt. Meets all UL 20 requirements, Federal Specifications WS 896.
Cooper 125 Dryer Electrical Receptacle Cooper 112 Range Electrical Receptacle Cooper 5223-7 Grounded Standard Toggle Switch
Surface mount, range and dryer. Meets all UL 498 requirements. For use with copper or aluminum wire, 75 degrees Celsius rated terminals. Lay-in terminals accept up to number 4 wire. 3/4" and 1" knockouts and adjustable cord clamp allow for wiring from bottom or back. Size: 2-1/32" x 2-1/2" x 4-3/4". NEMA 10-30. Surface mount, range and dryer. Meets all UL 498 requirements. For use with copper or aluminum wire, 75 degrees Celsius rated terminals. Lay-in terminals accept up to number 4 wire. 3/4" and 1" knockouts and adjustable cord clamp allow for wiring from bottom or back. Size: 2-1/32" x 2-1/2" x 4-3/4". NEMA 10-50. Meets all UL 20 requirements. For direct connection to aluminum or copper wire. Longer, wider strap provides 40 percent more contact area to wall board. Virtually eliminates floating installations. Industrial design cam action mechanism insures quiet switch action. Side wire terminals accept up to #10 solid or stranded wire. Terminal screws are backed out-ready for wiring. Combination slot/Phillips head mounting and terminal screws. 15 amp, 120 volt. UL Listed.
Cooper 5223-7 Standard Toggle Switch Erico 815860UPC Grounding Rods Amerelle 1-Rocker Wall Plate
Meets all UL 20 requirements. For direct connection to aluminum or copper wire. Longer, wider strap provides 40 percent more contact area to wall board. Virtually eliminates floating installations. Industrial design cam action mechanism insures quiet switch action. Side wire terminals accept up to #10 solid or stranded wire. Terminal screws are backed out-ready for wiring. Combination slot/Phillips head mounting and terminal screws. 15 amp, 120 volt. UL Listed. Zinc-coated exteriors are hot-dip galvanized for solid protection against corrosion in accordance with ASTM specification A153-78. Surfaces are rigidly inspected to eliminate seams, slivers and other defects. Meet EEI-NEMA TDJ-30 and are REA listed. 15 year service life in most soils. Galvanized plated steel. Amerelle Wall Plate, 1-Rocker, Series: Contemporary, 5-1/4 in Length, 3 in Width, 1 Gangs, Oak Wood, Light, Screw Mounting, Includes: Matching Screws, UL Listed
Eritech 615840UPC Grounding Rod Cooper 1303-7LT Lighted Grounded Toggle Switch Gardner Bender GMC-88C5 Modular Electrical Plug
Copperbonded, resists corrosion better than galvanized rods, allowing for a 30-year service life in most soils. Uniform plating thickness, average tensile strength of 80,000 psi and straightness tolerance of .010" per linear foot. Exceeds the requirements of ANSI/UL 467-1984, CSA, and ANSI/NEMA GR-1. Meets all UL 20 requirements. Longer, wider strap provides 40 percent more contact area to wall board. Virtually eliminates floating installations. Industrial design cam action mechanism insures quiet switch action. Built-in wire stripper for number 14  wire. Built-in wire looper for pre-looping. Double riveted switch. Three way switches feature additional push-in common termination for feed-through tapping. Push-in terminals accept number 14 solid wire only. Side wire terminals accept up to number 10 solid or stranded wire. Combination slot/Phillips head mounting and terminal screws. Use with network/twisted pair cable CAT-5E, 8-position, 8-contact, rounded cable, solid wire.
Cooper C1303-7LTV-L Lighted Grounding Toggle Switch Cooper C1303-7LTW-L Lighted Grounding Toggle Switch AmerTac Zenith PN10255EB CAT5E Network Cable
Meets all UL 20 requirements. Longer, wider strap provides 40 percent more contact area to wall board. Virtually eliminates floating installations. Industrial design cam action mechanism insures quiet switch action. Built-in wire stripper for number 14  wire. Built-in wire looper for pre-looping. Double riveted switch. Three way switches feature additional push-in common termination for feed-through tapping. Push-in terminals accept number 14 solid wire only. Side wire terminals accept up to number 10 solid or stranded wire. Combination slot/Phillips head mounting and terminal screws. Meets all UL 20 requirements. Longer, wider strap provides 40 percent more contact area to wall board. Virtually eliminates floating installations. Industrial design cam action mechanism insures quiet switch action. Built-in wire stripper for number 14  wire. Built-in wire looper for pre-looping. Double riveted switch. Three way switches feature additional push-in common termination for feed-through tapping. Push-in terminals accept number 14 solid wire only. Side wire terminals accept up to number 10 solid or stranded wire. Combination slot/Phillips head mounting and terminal screws. Connects computer to hub or RJ45 wall jack. Black cable.
Cooper C7503W-SP-L Decorative Standard Rocker Switch Cooper C7503V-SP Decorative Standard Rocker Switch Cooper Wiring 277W-BOX Combination Devices
Ultrasonic welding and integrated construction of the strap and body. Backwire clamps on the side terminals for installation of #12 and #14 wire. Redesigned paddle. Built-in wire stripper for #12 and #14 wire. Stippled ground screw standard. 120/277 volt AC rating for fluorescent lighting fixtures typical in commercial applications. Push in terminals accept #14 solid wire only. Temperature rating of -20 to 60 degrees C. Meets flammability requirements per UL 94, 6504, V2 rated, VO rated. UL and cUL Listed, Meets all UL20 requirements, file # E18704. Carded. Ultrasonic welding and integrated construction of the strap and body. Backwire clamps on the side terminals for installation of #12 and #14 wire. Redesigned paddle. Built-in wire stripper for #12 and #14 wire. Stippled ground screw standard. 120/277 volt AC rating for fluorescent lighting fixtures typical in commercial applications. Push in terminals accept #14 solid wire only. Temperature rating of -20 to 60 degrees C. Meets flammability requirements per UL 94, 6504, V2 rated, VO rated. UL and cUL Listed, Meets all UL20 requirements, file # E18704. Carded. Single pole side wire switch. Grounding terminal screw standard. 15 amp, 120/277 volt rating. 0.050" thick steel mounting strap zinc-plated for corrosion resistance. Terminal screws backed out ready for wiring. Side wire terminals accept up to #10 solid or stranded wire. Pilot light rating of 1/25 watt - 120 volt, may be wired to indicate power "on" or power "off". Combination slot/Phillips head mounting and terminal screws.
Cooper Wiring 277V-BOX Combination Devices Arrow Hart 271 Duplex Grounded Toggle Switch Arrow Hart 271V Duplex Grounding Toggle Switch
Single pole side wire switch. Grounding terminal screw standard. 15 amp, 120/277 volt rating. 0.050" thick steel mounting strap zinc-plated for corrosion resistance. Terminal screws backed out ready for wiring. Side wire terminals accept up to #10 solid or stranded wire. Pilot light rating of 1/25 watt - 120 volt, may be wired to indicate power "on" or power "off". Combination slot/Phillips head mounting and terminal screws. Grounding terminal screw standard. Combination switch with additional switch has 120/277 volt rating, ideal for fluorescent lighting fixtures typical in commercial applications. 0.050" thick steel mounting strap zinc-plated for corrosion resistance. Break-off provision for wiring both devices on same circuit or on separate circuits. Terminal screws backed out and ready for wiring. Side wire terminals accept up to #10 solid or stranded wire. Combination slot/Phillips head mounting and terminal screws. Switches meet all UL 20 requirements. UL Listed. Grounding terminal screw standard. Combination switch with additional switch has 120/277 volt rating, ideal for fluorescent lighting fixtures typical in commercial applications. 0.050" thick steel mounting strap zinc-plated for corrosion resistance. Break-off provision for wiring both devices on same circuit or on separate circuits. Terminal screws backed out and ready for wiring. Side wire terminals accept up to #10 solid or stranded wire. Combination slot/Phillips head mounting and terminal screws. Switches meet all UL 20 requirements. UL Listed.
Arrow Hart 271W Duplex Grounding Toggle Switch AmerTac Zenith PU1010ABB Type A/B 2.0 USB Cable Eritech CWP2J Grounding Pipe Clamp
Grounding terminal screw standard. Combination switch with additional switch has 120/277 volt rating, ideal for fluorescent lighting fixtures typical in commercial applications. 0.050" thick steel mounting strap zinc-plated for corrosion resistance. Break-off provision for wiring both devices on same circuit or on separate circuits. Terminal screws backed out and ready for wiring. Side wire terminals accept up to #10 solid or stranded wire. Combination slot/Phillips head mounting and terminal screws. Switches meet all UL 20 requirements. UL Listed. Type A to type B USB 2.0 cable. Connects USB compliant devices. Transfer speeds up to 480 Mbps. Bolted water pipe clamps made from high-strength corrosion-resistant copper alloy. Connects grounding wire to the grounding rod. Range 10 solid - 2 stranded. UL Listed.
Arrow Hart 1234-BOX  Grounded Power Receptacle Steel City R Threaded Rod Arrow Hart 1263-BOX  Power Receptacle
Flush mount, range and dryer. Meets all UL 498 requirements. For use with copper or aluminum wire. 75 degrees Celsius rated terminals. Fits one or two gang enclosures, not included. NEMA 6-30. Framing and hanging applications. Free-running, corrosion resistant, burr-free. Flush receptacle, travel trailer. Heavy gauge galvanized steel mounting strap for corrosion resistance. For use with copper or aluminum wire. Meets all UL 498 requirements. Used with 83-box travel trailer 3 wire plug, SKU 698.2383. NEMA TT-30.
Arrow Hart 1257-SP Grounded  Electrical Receptacle Arrow Hart 1258-SP Grounded  Electrical Receptacle AmerTac Zenith VH1003HD High Speed HDMI Cable
Flush mount, range and dryer. Meets all UL 498 requirements. Heavy gauge steel mounting strap, zinc plated for corrosion resistance. For use with copper or aluminum wire, 75 degrees Celsius rated terminals. Fits one or two gang enclosures. NEMA 14-30. Flush mount, range and dryer. Meets all UL 498 requirements. Heavy gauge steel mounting strap, zinc plated for corrosion resistance. For use with copper or aluminum wire, 75 degrees Celsius rated terminals. Fits one or two gang enclosures. NEMA 14-50. Transfers audio/video signals between components with resolutions up to 1080p. Connects HD component to HDTV.
Eritech 815880UPC Grounding Rod AmerTac Zenith PU1005KTB USB Cable Kit Eritech 611380UPC Grounding Rod
Zinc-coated exteriors are hot-dip galvanized for solid protection against corrosion in accordance with ASTM specification A153-78. Surfaces are rigidly inspected to eliminate seams, slivers and other defects. Meet EEI-NEMA TDJ-30 and are REA listed. 15 year service life in most soils. Galvanized plated steel. Includes Mini 4 and 5, B, Micro and A. Connects any USB compliant device. Transfer speeds up to 480Mbps. Copperbonded, resists corrosion better than galvanized rods, allowing for a 30-year service life in most soils. Uniform plating thickness, average tensile strength of 80,000 psi and straightness tolerance of .010" per linear foot. Exceeds the requirements of ANSI/UL 467-1984, CSA, and ANSI/NEMA GR-1.
Arrow Hart 805  Non-Grounded Single Receptacle Cooper C7513W-SP Decorative Lighted Standard Rocker Switch Arrow Hart 7700 Decorator Duplex Combination Switch
Flush mount. Meets all UL 498 requirements. Heavy gauge steel mounting strap, zinc plated for corrosion resistance. For use with copper or aluminum wire, 75 degrees Celsius rated terminals. Flush receptacles fit one or two gang enclosures. 10-20R NEMA configuration. Ultrasonic welding and integrated construction of the strap and body. Backwire clamps on the side terminals for installation of #12 and #14 wire. Redesigned paddle. Built-in wire stripper for #12 and #14 wire. Stippled ground screw standard. 120/277 volt AC rating for fluorescent lighting fixtures typical in commercial applications. Push in terminals accept #14 solid wire only. Temperature rating of -20 to 60 degrees C. Meets flammability requirements per UL 94, 6504, V2 rated, VO rated. UL and cUL Listed, Meets all UL20 requirements, file # E18704. Carded. High-impact resistant thermoplastic rocker, top and backbody. Injection molded housings and PVC resin, comply with UL94 V0 flammability ratings. Tri-combo screw heads, built-in wire stripper. Backwire clamps on side terminals for installation of #12 and #14 wire. Terminal screws are backed out for easier and faster wiring. Thick (0.045"/1.14mm) steel mounting strap is zinc-plated. Automatic grounding system eliminates the need for bonding jumper in grounded metal enclosure and provides redundant measure of ground continuity where a jumper is used. 120/277 volt AC, 15 amp rocker switches with break-off provision for wiring both devices on the same circuit or on separate circuits. UL, cUL Listed and NOM 426 rated.
Arrow Hart 7700 Decorator Duplex Combination Switch SWITCH DPLX DECO LT ALMOND    Arrow Hart 1254-BOX  Grounded Power Receptacle
High-impact resistant thermoplastic rocker, top and backbody. Injection molded housings and PVC resin, comply with UL94 V0 flammability ratings. Tri-combo screw heads, built-in wire stripper. Backwire clamps on side terminals for installation of #12 and #14 wire. Terminal screws are backed out for easier and faster wiring. Thick (0.045"/1.14mm) steel mounting strap is zinc-plated. Automatic grounding system eliminates the need for bonding jumper in grounded metal enclosure and provides redundant measure of ground continuity where a jumper is used. 120/277 volt AC, 15 amp rocker switches with break-off provision for wiring both devices on the same circuit or on separate circuits. UL, cUL Listed and NOM 426 rated. High-impact resistant thermoplastic rocker, top and backbody. Injection molded housings and PVC resin, comply with UL94 V0 flammability ratings. Tri-combo screw heads, built-in wire stripper. Backwire clamps on side terminals for installation of #12 and #14 wire. Terminal screws are backed out for easier and faster wiring. Thick (0.045"/1.14mm) steel mounting strap is zinc-plated. Automatic grounding system eliminates the need for bonding jumper in grounded metal enclosure and provides redundant measure of ground continuity where a jumper is used. 120/277 volt AC, 15 amp rocker switches with break-off provision for wiring both devices on the same circuit or on separate circuits. UL, cUL Listed and NOM 426 rated. Flush mount, range and dryer. Heavy gauge steel mounting strap, zinc-plated for corrosion resistance. Meets all UL 498 requirements. For use with copper or aluminum wire, 75 degrees Celsius rated terminals. Fits one or two gang enclosures. NEMA 6-50.
Gardner Bender GGP-1261 Grounding Pigtail Cooper Wiring 275V-BOX Combination Devices Cooper Wiring 275W-BOX Combination Devices
AWG number 12 solid wire. 6-1/2" long with captured screw, other end stripped. Grounding terminal screw standard. Combination switch with additional switch has 120/277 volt rating, ideal for fluorescent lighting fixtures typical in commercial applications. 0.050" thick steel mounting strap zinc-plated for corrosion resistance. Break-off provision for wiring both devices on same circuit or on separate circuits. Terminal screws backed out and ready for wiring. Side wire terminals accept up to #10 solid or stranded wire. Combination slot/Phillips head mounting and terminal screws. Switches meet all UL 20 requirements. UL Listed. Grounding terminal screw standard. Combination switch with additional switch has 120/277 volt rating, ideal for fluorescent lighting fixtures typical in commercial applications. 0.050" thick steel mounting strap zinc-plated for corrosion resistance. Break-off provision for wiring both devices on same circuit or on separate circuits. Terminal screws backed out and ready for wiring. Side wire terminals accept up to #10 solid or stranded wire. Combination slot/Phillips head mounting and terminal screws. Switches meet all UL 20 requirements. UL Listed.
Cooper 7513W-BOX Decorative Lighted Standard Rocker Switch Cooper 7513V-BOX Decorative Lighted Standard Rocker Switch Eritech 615880UPC Grounding Rod
Ultrasonic welding and integrated construction of the strap and body. Backwire clamps on the side terminals for installation of #12 and #14 wire. Thermoplastic rocker, top and backbody are virtually unbreakable. Screws accept slotted, Phillips and Robertson head tools for installation in both the U.S. and Canada. Longer, wider strap provides 40 percent more contact area to wall board. Virtually eliminates floating installations. Built-in wire stripper for #12 and #14 wire. Stippled ground screw standard. 15 amp, 120/277 volt AC rating for fluorescent lighting fixtures typical in commercial applications. Push in terminals accept #14 solid wire only. Temperature rating of -20 to 60 degrees C. Meets flammability requirements per UL 94, 6504, V2 rated, VO rated. UL and cUL Listed, Meets all UL20 requirements. Ultrasonic welding and integrated construction of the strap and body. Backwire clamps on the side terminals for installation of #12 and #14 wire. Thermoplastic rocker, top and backbody are virtually unbreakable. Screws accept slotted, Phillips and Robertson head tools for installation in both the U.S. and Canada. Longer, wider strap provides 40 percent more contact area to wall board. Virtually eliminates floating installations. Built-in wire stripper for #12 and #14 wire. Stippled ground screw standard. 15 amp, 120/277 volt AC rating for fluorescent lighting fixtures typical in commercial applications. Push in terminals accept #14 solid wire only. Temperature rating of -20 to 60 degrees C. Meets flammability requirements per UL 94, 6504, V2 rated, VO rated. UL and cUL Listed, Meets all UL20 requirements. Copperbonded, resists corrosion better than galvanized rods, allowing for a 30-year service life in most soils. Uniform plating thickness, average tensile strength of 80,000 psi and straightness tolerance of .010" per linear foot. Exceeds the requirements of ANSI/UL 467-1984, CSA, and ANSI/NEMA GR-1.
Erico IBTB Intersystem Bonding Termination Cooper 1303-7 Framed Grounded Toggle Switch Cooper 1303-7 Framed Grounded Toggle Switch
Intersystem bonding termination for residential and small commercial facilities. Meets the requirements of 2008 NEC Article 250.94.  Accommodates (5) 14 - 2 AWG bonding conductors and (1) 6 - 2 AWG grounding electrode conductor. Integral mounting base for easy installation. The polymeric base and housing is impact-resistant, UV-stabilized and meets UL requirements for weatherability performance. Includes corrosion-resistant, stainless steel mounting hardware. Connects to grounding electrode conductor - does not rely on meter base enclosure bonding connection. 1.41" depth x 2.01" width x 4.5" length. cULus Listed. Longer, wider strap provides 40 percent more contact area to wall board. Virtually eliminates floating installations. Unbreakable top and bottom housing. Industrial design cam action mechanism insures quiet switch action. Built-in wire stripper for number 14 and number 12 wire. Built-in wire looper for pre-looping. Double riveted switch. Three way switches feature additional push-in common termination for feed-through tapping. Push-in terminals accept number 14 solid wire only. Side wire terminals accept up to number 10 solid or stranded wire. Combination slot/Phillips and Robertson-head terminal screws. 15 amp, 120 volt. Meets all UL 20 requirements. UL Listed. Longer, wider strap provides 40 percent more contact area to wall board. Virtually eliminates floating installations. Unbreakable top and bottom housing. Industrial design cam action mechanism insures quiet switch action. Built-in wire stripper for number 14 and number 12 wire. Built-in wire looper for pre-looping. Double riveted switch. Three way switches feature additional push-in common termination for feed-through tapping. Push-in terminals accept number 14 solid wire only. Side wire terminals accept up to number 10 solid or stranded wire. Combination slot/Phillips and Robertson-head terminal screws. 15 amp, 120 volt. Meets all UL 20 requirements. UL Listed.
Cooper 1303-7 Framed Grounded Toggle Switch Patrol 7737V-BOX Night Light Arrow Hart 1212 Grounded Electrical Receptacle
Longer, wider strap provides 40 percent more contact area to wall board. Virtually eliminates floating installations. Unbreakable top and bottom housing. Industrial design cam action mechanism insures quiet switch action. Built-in wire stripper for number 14 and number 12 wire. Built-in wire looper for pre-looping. Double riveted switch. Three way switches feature additional push-in common termination for feed-through tapping. Push-in terminals accept number 14 solid wire only. Side wire terminals accept up to number 10 solid or stranded wire. Combination slot/Phillips and Robertson-head terminal screws. 15 amp, 120 volt. Meets all UL 20 requirements. UL Listed. Dimmable 3 LED nightlight for bathrooms, hallways, stairs and landings. Flush-mounted, features low wattage LED lamps that consume a maximum of 1 watt of energy, rated for 50,000 hours lamp life. Full dimming as well as 3 preset levels. Sensor turns the nightlight on when ambient light is low, and off when ambient light is high. Built-in wire stripper speeds installation. 1 watt, 120 volt AC. Surface mount, range and dryer. Meets all UL 498 requirements. For use with copper or aluminum wire, 75 degrees Celsius rated terminals. Lay-in terminals accept up to #4 wire. 3/4" and 1" knockouts and adjustable cord clamp allow for wiring from bottom or back. Size: 2-3/32" x 2-1/2" x 4-3/4". NEMA 14-50.
Arrow Hart 1225 Grounded Electrical Receptacle NIGHTLIGHT LED LA             Eritech EDS58 Drive Sleeve
NIGHTLIGHT LED LA
Our Price: $13.82
Surface mount, range and dryer. Meets all UL 498 requirements. For use with copper or aluminum wire, 75 degrees Celsius rated terminals. Lay-in terminals accept up to number 4 wire. 3/4" and 1" knockouts and adjustable cord clamp allow for wiring from bottom or back. Size: 2-3/32" x 2-1/2" x 4-3/4". NEMA 14-30. Dimmable 3 LED nightlight for bathrooms, hallways, stairs and landings. Flush-mounted, features low wattage LED lamps that consume a maximum of 1 watt of energy, rated for 50,000 hours lamp life. Full dimming as well as 3 preset levels. Sensor turns the nightlight on when ambient light is low, and off when ambient light is high. Built-in wire stripper speeds installation. 1 watt, 120 volt AC. The driving head fits over the ground rod to protect the rod end from "mushrooming" as the ground rod is driven into earth.
AmerTac Zenith VH1006HD High Speed HDMI Cable Cooper 1303V Framed Non-Grounded Toggle Switch Arrow Hart 1252  Commercial Power Receptacle
Transfers audio/video signals between components with resolutions up to 1080p. Connects HD component to HDTV. Longer, wider strap provides 40 percent more contact area to wall board. Virtually eliminates floating installations. Industrial design cam action mechanism. Built-in wire stripper for number 14 and number 12 wire. Built-in wire looper. Double riveted switch. Push-in terminals accept number 12 or number 14 solid wire only. Side wire terminals accept up to number 10 solid or stranded wire. Combination slot/Phillips head mounting and terminal screws. 15 amp, 120 volt. Meets all UL 20 requirements. Surface mount, range and dryer. Meets all UL 498 requirements. For use with copper or aluminum wire, 75 degrees Celsius rated terminals. Lay-in terminals accept up to  number 4 wire. 3/4" and 1" concentric knockouts and adjustable cord clamp allow for wiring from bottom or back. Size: 2-1/2" x 4-3/4" x 2-3/32". NEMA 6-50. Plug for this receptacle - Orgill sku (640.9478).
Eagle 1303 Non-Grounded Toggle Switch Patrol 7737W-K-L Night Light Cooper Wiring 276V-BOX Combination Devices
Longer, wider strap provides 40 percent more contact area to wall board. Virtually eliminates floating installations. Industrial design cam action mechanism. Built-in wire stripper for number 14 and number 12 wire. Built-in wire looper. Double riveted switch. Push-in terminals accept number 12 or number 14 solid wire only. Side wire terminals accept up to number 10 solid or stranded wire. Combination slot/Phillips head mounting and terminal screws. 15 amp, 120 volt. Meets all UL 20 requirements. Dimmable 3 LED nightlight for bathrooms, hallways, stairs and landings. Flush-mounted, features low wattage LED lamps that consume a maximum of 1 watt of energy, rated for 50,000 hours lamp life. Full dimming as well as 3 preset levels. Sensor turns the nightlight on when ambient light is low, and off when ambient light is high. Built-in wire stripper speeds installation. 1 watt, 120 volt AC. Grounding terminal screw standard. Combination switch with additional switch has 120/277 volt rating, ideal for fluorescent lighting fixtures typical in commercial applications. 0.050" thick steel mounting strap zinc-plated for corrosion resistance. Break-off provision for wiring both devices on same circuit or on separate circuits. Terminal screws backed out and ready for wiring. Side wire terminals accept up to #10 solid or stranded wire. Combination slot/Phillips head mounting and terminal screws. Switches meet all UL 20 requirements. UL Listed.
Cooper Wiring 276W-BOX Combination Devices Cooper 1303B Framed Non-Grounded Toggle Switch AmerTac Zenith PN10505EB CAT5E Network Cable
Grounding terminal screw standard. Combination switch with additional switch has 120/277 volt rating, ideal for fluorescent lighting fixtures typical in commercial applications. 0.050" thick steel mounting strap zinc-plated for corrosion resistance. Break-off provision for wiring both devices on same circuit or on separate circuits. Terminal screws backed out and ready for wiring. Side wire terminals accept up to #10 solid or stranded wire. Combination slot/Phillips head mounting and terminal screws. Switches meet all UL 20 requirements. UL Listed. Longer, wider strap provides 40 percent more contact area to wall board. Virtually eliminates floating installations. Industrial design cam action mechanism. Built-in wire stripper for number 14 and number 12 wire. Built-in wire looper. Double riveted switch. Push-in terminals accept number 12 or number 14 solid wire only. Side wire terminals accept up to number 10 solid or stranded wire. Combination slot/Phillips head mounting and terminal screws. 15 amp, 120 volt. Meets all UL 20 requirements. Connects computer to hub or RJ45 wall jack. Black cable.
Arrow Hart WD1232-BOX  Commercial Power Receptacle Arrow Hart 3032 Lighted Toggle Switch Cooper Wiring 7738V-BOX Arrow Hart Switch/Nightlights
Surface mount, range and dryer. Meets all UL 498 requirements. For use with copper or aluminum wire, 75 degrees Celsius rated terminals. Lay-in terminals accept up to number 4 wire. 3/4" and 1" concentric knockouts and adjustable cord clamp allow for wiring from bottom or back. Size: 2-1/2" x 4-3/4" x 2- 3/32". NEMA 6-30. Industrial design cam action mechanism insures quiet switch action. Color-coded faces identify amperage: blue-15 amp, red-20 amp, green-30 amp. Automatic grounding system eliminates need for bonding jumper in grounded metal enclosure. Back and side wire terminals accept up to number 10 solid or stranded wire. Ground screw terminal standard. 0.050" thick steel mounting strap zinc-plated for corrosion resistance. 30 amp, 120/277 volt rating for fluorescent lighting fixtures. Combination slot/Phillips head mounting and terminal screws. Meets all UL 20 requirements, Federal specifications WS 896. Dimmable 3 LED nightlight combination with switch for bathrooms, hallways, stairs and landings. Flush-mounted, features low wattage LED lamps that consume a maximum of 1 watt of energy, rated for 50,000 hours lamp life. Full dimming as well as 3 preset levels. Sensor turns the nightlight on when ambient light is low, and off when ambient light is high. Built-in wire stripper speeds installation. 15 amp, 120 volt AC switch, 1watt, 120 volt AC nightlight. Temperature rating: 0 to 40 degreesC (32 to 104 degreesF). cULus Listed to UL20, file no. E18704.
Cooper Wiring 7738W-K-L Arrow Hart Switch/Nightlights SWITCH/NIGHTLIGHT LED LA      Zenith VN1ANTP2 Active Passive 2 Di-Pole TV Antenna
SWITCH/NIGHTLIGHT LED LA
Our Price: $17.45
Dimmable 3 LED nightlight combination with switch for bathrooms, hallways, stairs and landings. Flush-mounted, features low wattage LED lamps that consume a maximum of 1 watt of energy, rated for 50,000 hours lamp life. Full dimming as well as 3 preset levels. Sensor turns the nightlight on when ambient light is low, and off when ambient light is high. Built-in wire stripper speeds installation. 15 amp, 120 volt AC switch, 1watt, 120 volt AC nightlight. Temperature rating: 0 to 40 degreesC (32 to 104 degreesF). cULus Listed to UL20, file no. E18704. Dimmable 3 LED nightlight combination with switch for bathrooms, hallways, stairs and landings. Flush-mounted, features low wattage LED lamps that consume a maximum of 1 watt of energy, rated for 50,000 hours lamp life. Full dimming as well as 3 preset levels. Sensor turns the nightlight on when ambient light is low, and off when ambient light is high. Built-in wire stripper speeds installation. 15 amp, 120 volt AC switch, 1watt, 120 volt AC nightlight. Temperature rating: 0 to 40 degreesC (32 to 104 degreesF). cULus Listed to UL20, file no. E18704. Passive antenna with VHF and UHF capability. Flexible UHF loop for channels 14 through 69, Full 39" dipole captures VHF broadcast signals on channels 2 through 13. Receives local HDTV broadcast signals for free. Heavy weighted base with 5' coaxial cable and protective bottom. 8.5" height x 5.17" width x 3" depth.
Cooper 1303-7W Framed Grounding Toggle Switch Zenith VA3001HDEX Foldable HDMI Cable Extender American Tack and Hdwe VA3001HDFA HDMI Cable Adapter/Connectors
Longer, wider strap provides 40 percent more contact area to wall board. Virtually eliminates floating installations. Unbreakable top and bottom housing. Industrial design cam action mechanism insures quiet switch action. Built-in wire stripper for number 14 and number 12 wire. Built-in wire looper for pre-looping. Double riveted switch. Three way switches feature additional push-in common termination for feed-through tapping. Push-in terminals accept number 14 solid wire only. Side wire terminals accept up to number 10 solid or stranded wire. Combination slot/Phillips and Robertson-head terminal screws. 15 amp, 120 volt. Meets all UL 20 requirements. UL Listed. Combines two HDMI cables to extend new or existing hookup. Adjusts up to a 90 degree angle to connect in hard to reach places. 2.25" height x .87" width x .5" depth. Adjusts up to a 90 degree angle to connect a HDMI cable to a wall mounted HDTV or other device  in tight, hard to reach places. Meets current HDMI specifications and can support HDTV resolution. 2.25" height x .87" width x .5" depth.
WPLT DEVON BLACK STL 1R       Thomas And Betts ZB1400HS 10 Superstrut Conduit Channel Strut Cooper 1303-7B Framed Grounding Toggle Switch
WPLT DEVON BLACK STL 1R
Our Price: $18.17
With screws. 5" height x 2-3/4" width x 1/4" depth. Steel half slot strut, gold galvanized. For support and framing applications. Longer, wider strap provides 40 percent more contact area to wall board. Virtually eliminates floating installations. Unbreakable top and bottom housing. Industrial design cam action mechanism insures quiet switch action. Built-in wire stripper for number 14 and number 12 wire. Built-in wire looper for pre-looping. Double riveted switch. Three way switches feature additional push-in common termination for feed-through tapping. Push-in terminals accept number 14 solid wire only. Side wire terminals accept up to number 10 solid or stranded wire. Combination slot/Phillips and Robertson-head terminal screws. 15 amp, 120 volt. Meets all UL 20 requirements. UL Listed.
Cooper 1303-7V Framed Grounding Toggle Switch Maestro MS-OPS2H-IV Occupancy Sensor Switch Maestro MS-OPS2H-WH Occupancy Sensor Switch
Longer, wider strap provides 40 percent more contact area to wall board. Virtually eliminates floating installations. Unbreakable top and bottom housing. Industrial design cam action mechanism insures quiet switch action. Built-in wire stripper for number 14 and number 12 wire. Built-in wire looper for pre-looping. Double riveted switch. Three way switches feature additional push-in common termination for feed-through tapping. Push-in terminals accept number 14 solid wire only. Side wire terminals accept up to number 10 solid or stranded wire. Combination slot/Phillips and Robertson-head terminal screws. 15 amp, 120 volt. Meets all UL 20 requirements. UL Listed. Automatically turn lights on and off with this wall-mounted switch. Turns lights on when anyone enters the room and turns them off when room is vacant. Uses Advanced XCT sensing technology. Up to 900 sq ft of coverage. Also features "Ambient Light Detect" mode: lights won't turn on if there is enough natural light present; user may still manually turn lights on. Works with all bulb types. Requires ground wire. Maximum capacity 150 watts CFL/LED. UL listed. Automatically turn lights on and off with this wall-mounted switch. Turns lights on when anyone enters the room and turns them off when room is vacant. Uses Advanced XCT sensing technology. Up to 900 sq ft of coverage. Also features "Ambient Light Detect" mode: lights won't turn on if there is enough natural light present; user may still manually turn lights on. Works with all bulb types. Requires ground wire. Maximum capacity 150 watts CFL/LED. UL listed.
Maestro MS-VPS2H-WH Vacancy Sensor Switch WPLT CENTURY ANT NKL STEEL 1R Thomas And Betts ZA1200HS 4 Superstrut Conduit Channel Strut
Requires lights to be manually turned on and will automatically turn lights off when the room is vacant. Works with all bulb types and meets California Title 24 and other sensor code requirements. Requires ground wire. UL Listed. Traditional square corner design. With screws. Steel half slot strut, gold galvanized. For support and framing applications.
Erico 615800UPC Grounding Rods Arrow Hart 7700 Decorator Single Combination Switch Arrow Hart 7700 Decorator Single Combination Switch
Copperbonded, resists corrosion better than galvanized rods, allowing for a 30-year service life in most soils. Uniform plating thickness, average tensile strength of 80,000 psi and straightness tolerance of .010" per linear foot. Exceeds the requirements of ANSI/UL 467-1984, CSA, and ANSI/NEMA GR-1. High-impact resistant thermoplastic rocker, top and backbody. Injection molded housings and PVC resin, comply with UL94 V0 flammability ratings. Tri-combo screw heads, built-in wire stripper. Backwire clamps on side terminals for installation of #12 and #14 wire. Terminal screws are backed out for easier and faster wiring. Thick (0.045"/1.14mm) steel mounting strap is zinc-plated. Automatic grounding system eliminates the need for bonding jumper in grounded metal enclosure and provides redundant measure of ground continuity where a jumper is used. 120/277 volt AC, 15 amp rocker switches with break-off provision for wiring devices on the same circuit or on separate circuits. UL, cUL Listed and NOM 426 rated. High-impact resistant thermoplastic rocker, top and backbody. Injection molded housings and PVC resin, comply with UL94 V0 flammability ratings. Tri-combo screw heads, built-in wire stripper. Backwire clamps on side terminals for installation of #12 and #14 wire. Terminal screws are backed out for easier and faster wiring. Thick (0.045"/1.14mm) steel mounting strap is zinc-plated. Automatic grounding system eliminates the need for bonding jumper in grounded metal enclosure and provides redundant measure of ground continuity where a jumper is used. 120/277 volt AC, 15 amp rocker switches with break-off provision for wiring devices on the same circuit or on separate circuits. UL, cUL Listed and NOM 426 rated.
SWITCH DECO COMBO 3SP 15A LA  SWITCH TGLE 3W GRD LA 15A 120V WPLT CENTURY STN BRSS STEEL 1R
High-impact resistant thermoplastic rocker, top and backbody. Injection molded housings and PVC resin, comply with UL94 V0 flammability ratings. Tri-combo screw heads, built-in wire stripper. Backwire clamps on side terminals for installation of #12 and #14 wire. Terminal screws are backed out for easier and faster wiring. Thick (0.045"/1.14mm) steel mounting strap is zinc-plated. Automatic grounding system eliminates the need for bonding jumper in grounded metal enclosure and provides redundant measure of ground continuity where a jumper is used. 120/277 volt AC, 15 amp rocker switches with break-off provision for wiring devices on the same circuit or on separate circuits. UL, cUL Listed and NOM 426 rated. Longer, wider strap provides 40 percent more contact area to wall board. Virtually eliminates floating installations. Unbreakable top and bottom housing. Industrial design cam action mechanism insures quiet switch action. Built-in wire stripper for number 14 and number 12 wire. Built-in wire looper for pre-looping. Double riveted switch. Three way switches feature additional push-in common termination for feed-through tapping. Push-in terminals accept number 14 solid wire only. Side wire terminals accept up to number 10 solid or stranded wire. Combination slot/Phillips and Robertson-head terminal screws. 15 amp, 120 volt. Meets all UL 20 requirements. UL Listed. Traditional square corner design. With screws.
Gardner Bender GMC-88M6 Modular Electrical Plug Cooper 1303B-BOX Framed Non-Grounded Toggle Switch Cooper 1303V-BOX Framed Non-Grounded Toggle Switch
Use with network/twisted pair cable CAT-6, 8-position, 8-contact, rounded cable, solid wire. Longer, wider strap provides 40 percent more contact area to wall board. Virtually eliminates floating installations. Industrial design cam action mechanism. Built-in wire stripper for number 14 and number 12 wire. Built-in wire looper. Double riveted switch. Push-in terminals accept number 12 or number 14 solid wire only. Side wire terminals accept up to number 10 solid or stranded wire. Combination slot/Phillips head mounting and terminal screws. 15 amp, 120 volt. Meets all UL 20 requirements. Longer, wider strap provides 40 percent more contact area to wall board. Virtually eliminates floating installations. Industrial design cam action mechanism. Built-in wire stripper for number 14 and number 12 wire. Built-in wire looper. Double riveted switch. Push-in terminals accept number 12 or number 14 solid wire only. Side wire terminals accept up to number 10 solid or stranded wire. Combination slot/Phillips head mounting and terminal screws. 15 amp, 120 volt. Meets all UL 20 requirements.
Cooper 1303 Framed Non-Grounded Toggle Switch AmerTac Zenith VH3003HDMN High Speed Mini HDMI Cable Thomas And Betts ZA1200HS 10 Superstrut Conduit Channel Strut
Longer, wider strap provides 40 percent more contact area to wall board. Virtually eliminates floating installations. Industrial design cam action mechanism. Built-in wire stripper for number 14 and number 12 wire. Built-in wire looper. Double riveted switch. Push-in terminals accept number 12 or number 14 solid wire only. Side wire terminals accept up to number 10 solid or stranded wire. Combination slot/Phillips head mounting and terminal screws. 15 amp, 120 volt. Meets all UL 20 requirements. Male 19 pin HDMI type A connector to male 19 pin mini HDMI type C connector. Gold plated connectors. Steel half slot strut, gold galvanized. For support and framing applications.
American Tack and Hdwe VH1006HDKIT HDMI Cable Kits Thomas And Betts ZA1200HS 6 Superstrut Conduit Channel Strut WPLT CENTURY AGED BRZ STEEL 1R
Transfers audio/video signals between components with resolutions up to 1080p. Connects HD component to HDTV. Contains two 6' cables and a connector to make a 12' cable if needed. Steel half slot strut, gold galvanized. For support and framing applications. Traditional square corner design. With screws.
SENSOR OCCUPANCY              Cooper OS306U-V-K Standard Occupancy/Vacancy Sensor Switch Cooper OS306U-W-K Standard Occupancy/Vacancy Sensor Switch
SENSOR OCCUPANCY
Our Price: $26.89
Replaces a standard light or fan switch. Works with Incandescent, Halogen, Fluorescent, LED, CFL, MLV and ELV lights. Status LED indicator. Sensors provide up to 180 degree field of view and 450 square feet of major motion coverage. Selectable time delay of 5 seconds to 30 minutes for lights to remain on after room is vacated. No neutral required for installation. Can be wired as a single-pole or 3-way. Electrostatic discharge protection. Suitable for multi-gang installations. Compatible with decorator-style wallplates and designer screwless wallplates. 120 volts AC, 60Hz, 1/6 HP. Replaces a standard light or fan switch. Works with Incandescent, Halogen, Fluorescent, LED, CFL, MLV and ELV lights. Status LED indicator. Sensors provide up to 180 degree field of view and 450 square feet of major motion coverage. Selectable time delay of 5 seconds to 30 minutes for lights to remain on after room is vacated. No neutral required for installation. Can be wired as a single-pole or 3-way. Electrostatic discharge protection. Suitable for multi-gang installations. Compatible with decorator-style wallplates and designer screwless wallplates. 120 volts AC, 60Hz, 1/6 HP. Replaces a standard light or fan switch. Works with Incandescent, Halogen, Fluorescent, LED, CFL, MLV and ELV lights. Status LED indicator. Sensors provide up to 180 degree field of view and 450 square feet of major motion coverage. Selectable time delay of 5 seconds to 30 minutes for lights to remain on after room is vacated. No neutral required for installation. Can be wired as a single-pole or 3-way. Electrostatic discharge protection. Suitable for multi-gang installations. Compatible with decorator-style wallplates and designer screwless wallplates. 120 volts AC, 60Hz, 1/6 HP.
WPLT FILIGREE AGED BRZ CAST 1R SWITCH DEC 3W 15A 120/277V ORB SWITCH DEC 3WY 15A 120/277V SG
Traditional square corner design. With screws. Ultrasonic welding and integrated construction of the strap and body. Backwire clamps on the side terminals for installation of #12 and #14 wire. Thermoplastic rocker, top and backbody are virtually unbreakable. Screws accept slotted, Phillips and Robertson head tools for installation in both the U.S. and Canada. Longer, wider strap provides 40 percent more contact area to wall board. Virtually eliminates floating installations. Built-in wire stripper for #12 and #14 wire. Stippled ground screw standard. 15 amp, 120/277 volt AC rating for fluorescent lighting fixtures typical in commercial applications. Push in terminals accept #14 solid wire only. Temperature rating of -20 to 60 degrees C. Meets flammability requirements per UL 94, 6504, V2 rated, VO rated. UL and cUL Listed, Meets all UL20 requirements. Ultrasonic welding and integrated construction of the strap and body. Backwire clamps on the side terminals for installation of #12 and #14 wire. Thermoplastic rocker, top and backbody are virtually unbreakable. Screws accept slotted, Phillips and Robertson head tools for installation in both the U.S. and Canada. Longer, wider strap provides 40 percent more contact area to wall board. Virtually eliminates floating installations. Built-in wire stripper for #12 and #14 wire. Stippled ground screw standard. 15 amp, 120/277 volt AC rating for fluorescent lighting fixtures typical in commercial applications. Push in terminals accept #14 solid wire only. Temperature rating of -20 to 60 degrees C. Meets flammability requirements per UL 94, 6504, V2 rated, VO rated. UL and cUL Listed, Meets all UL20 requirements.
WPLT DEERFIELD WHITE WOOD 1R  WPLT CHELSEA WHITE STL 1R     Maestro MS-OPS5M-IV 3-Way Occupancy Sensor Switch
WPLT CHELSEA WHITE STL 1R
Our Price: $29.79
Made from real wood. Traditional square corner design. With screws. Automatically turn lights on and off with this wall-mounted switch. turns lights on when anyone enters the room and turns them off when vacant. Detects motions of room occupants. Uses Advanced XCT sensing technology. up to 900 sq ft of coverage. Also features "Ambient Light Detect" mode: lights won't turn on if there is enough natural light present; user may still manually turn lights on. Works with all bulb types. Requires ground wire.
Maestro MS-OPS5M-WH 3-Way Occupancy Sensor Switch Maestro MS-VPS5MH-WH 3-Way Vacancy Sensor Switch American Tack and Hdwe VN1ANTA15 Zenith Indoor Tv Antennas
Automatically turn lights on and off with this wall-mounted switch. turns lights on when anyone enters the room and turns them off when vacant. Detects motions of room occupants. Uses Advanced XCT sensing technology. up to 900 sq ft of coverage. Also features "Ambient Light Detect" mode: lights won't turn on if there is enough natural light present; user may still manually turn lights on. Works with all bulb types. Requires ground wire. Requires lights to be manually turned on and will automatically turn lights off when the room is vacant. Works with all bulb types and meets California Title 24 and other sensor code requirements. Requires ground wire. UL Listed. High gain low noise wide band amplifier. Flat design offers 2-way positioning for best reception. Amplifier boosts signal strength for increased picture quality. Receives local HD and Digital TV broadcast signals.  Blue power indicator light. 6.75" height x 7" width x 1.17" depth. Includes power adapter and 58" coax cable.
Core Savant OS310U-W-K Motion Sensor Switch Core Savant OS310U-V-K Motion Sensor Switch SENSOR SWITCH OCCUPANCY
SENSOR SWITCH OCCUPANCY
Our Price: $36.22
For incandescent, Magnetic Low Voltage (MLV), Electronic Low Voltage (ELV), fluorescent, compact fluorescent, LED and motors up to 1/6 HP. Includes selectable and dimmable nightlight. Turns on automatically when a person enters the room, automatically turn off lights after a selectable time delay of 5 seconds (Test Mode), 5 minutes (factory default), 15 minutes and 30 minutes. Detects when the room is occupied very briefly and shortens the time delay in order to save energy,  includes a light level adjustment for daylight to prevent motion from turning on the lights.  Provides 180 degree field of view and 1000 square feet of major motion coverage. Includes a decorator mid-size wallplate. A green LED indicates load status, provides locator light in dark and blinks to indicate motion detection. 8.3 amp, 1000 watts, 120 volts AC, 60 Hz. 6" pre-stripped wire leads, #14 AWG. cULus Listed, NOM Certified, California Title 24 Compliant. Temperature rating 32 to 104 degrees F. For incandescent, Magnetic Low Voltage (MLV), Electronic Low Voltage (ELV), fluorescent, compact fluorescent, LED and motors up to 1/6 HP. Includes selectable and dimmable nightlight. Turns on automatically when a person enters the room, automatically turn off lights after a selectable time delay of 5 seconds (Test Mode), 5 minutes (factory default), 15 minutes and 30 minutes. Detects when the room is occupied very briefly and shortens the time delay in order to save energy,  includes a light level adjustment for daylight to prevent motion from turning on the lights.  Provides 180 degree field of view and 1000 square feet of major motion coverage. Includes a decorator mid-size wallplate. A green LED indicates load status, provides locator light in dark and blinks to indicate motion detection. 8.3 amp, 1000 watts, 120 volts AC, 60 Hz. 6" pre-stripped wire leads, #14 AWG. cULus Listed, NOM Certified, California Title 24 Compliant. Temperature rating 32 to 104 degrees F. For incandescent, Magnetic Low Voltage (MLV), Electronic Low Voltage (ELV), fluorescent, compact fluorescent, LED and motors up to 1/6 HP. Includes selectable and dimmable nightlight. Turns on automatically when a person enters the room, automatically turn off lights after a selectable time delay of 5 seconds (Test Mode), 5 minutes (factory default), 15 minutes and 30 minutes. Detects when the room is occupied very briefly and shortens the time delay in order to save energy,  includes a light level adjustment for daylight to prevent motion from turning on the lights.  Provides 180 degree field of view and 1000 square feet of major motion coverage. Includes a decorator mid-size wallplate. A green LED indicates load status, provides locator light in dark and blinks to indicate motion detection. 8.3 amp, 1000 watts, 120 volts AC, 60 Hz. 6" pre-stripped wire leads, #14 AWG. cULus Listed, NOM Certified, California Title 24 Compliant. Temperature rating 32 to 104 degrees F.
La Crosse 810-106 Emergency Weather Radios Core VS310U-W-K Occupancy/Vacancy Sensor Switch Core VS310U-V-K Occupancy/Vacancy Sensor Switch
AM/FM/WB NOAA weather radio with LED flashlight. Receives 7 weather band channels.  Automatically activates when severe weather or other emergencies threaten your local area.  Bright blue LED backlight changes to bright red during an alert with loud alarm tones and voice output at full volume.  Standard AM/FM radio reception with telescoping antenna & 3.5mm earphone jack. Low battery indicator. Powered by 6.0 V AC Adapter (included) or 3 AAA alkaline batteries (not included). For incandescent, Magnetic Low Voltage (MLV), Electronic Low Voltage (ELV), fluorescent, compact fluorescent, LED and motors up to 1/6 HP. Includes selectable and dimmable nightlight. Turned on manually with the ON/OFF button. Automatically turn off lights after a selectable time delay of 5 seconds (Test Mode), 5 minutes, 15 minutes and 30 minutes (factory default). When the lights have turned off due to a lack of motion, the lights will turn ON automatically if motion is detected within 10 seconds. Green LED indicates load status, provides locator light in dark and blinks to indicate motion detection. Provides 180 degree field of view and 1000 square feet of major motion coverage. Includes a decorator mid-size wallplate. 8.3 amp, 1000 watts, 120 volts AC, 60 Hz.  6" pre-stripped wire leads, #14 AWG. cULus Listed, NOM Certified, California Title 24 Compliant. Temperature rating 32 to 104 degrees F. For incandescent, Magnetic Low Voltage (MLV), Electronic Low Voltage (ELV), fluorescent, compact fluorescent, LED and motors up to 1/6 HP. Includes selectable and dimmable nightlight. Turned on manually with the ON/OFF button. Automatically turn off lights after a selectable time delay of 5 seconds (Test Mode), 5 minutes, 15 minutes and 30 minutes (factory default). When the lights have turned off due to a lack of motion, the lights will turn ON automatically if motion is detected within 10 seconds. Green LED indicates load status, provides locator light in dark and blinks to indicate motion detection. Provides 180 degree field of view and 1000 square feet of major motion coverage. Includes a decorator mid-size wallplate. 8.3 amp, 1000 watts, 120 volts AC, 60 Hz.  6" pre-stripped wire leads, #14 AWG. cULus Listed, NOM Certified, California Title 24 Compliant. Temperature rating 32 to 104 degrees F.
Raco 975 Ground Clip SWITCH/ROCKER 3W LA           Zenith VN1ANTADIG Active Digital Flat Omni-Directional TV Antenna
SWITCH/ROCKER 3W LA
Our Price: $40.40
For grounding switch and outlet boxes using non-metallic sheathed cables from No. 14 to No. 10. Ultrasonic welding and integrated construction of the strap and body. Backwire clamps on the side terminals for installation of #12 and #14 wire. Thermoplastic rocker, top and backbody are virtually unbreakable. Screws accept slotted, Phillips and Robertson head tools for installation in both the U.S. and Canada. Longer, wider strap provides 40 percent more contact area to wall board. Virtually eliminates floating installations. Built-in wire stripper for #12 and #14 wire. Stippled ground screw standard. 15 amp, 120/277 volt AC rating for fluorescent lighting fixtures typical in commercial applications. Push in terminals accept #14 solid wire only. Temperature rating of -20 to 60 degrees C. Meets flammability requirements per UL 94, 6504, V2 rated, VO rated. UL and cUL Listed, Meets all UL20 requirements. High gain, low noise, wide band. Signal Clear Technology performs through extremely low noise circuitry for fewer artifacts affecting picture quality. Digitally optimized, receives full HD television signals, horizontal or vertical polarizations, 360 degree omnidirectional. Provides reception with minimal position adjustment. Wall mountable. Blue power indicator light. Powered by AC adapter or USB cable (both included). 9.25" height x 9" width x 3" depth.