Home > ELECTRICAL > SPECIALTY ELECTRICAL > TELEPHONE & ACCESSORIES
Choose a sub category:
TELEPHONE ACCESSORIES TELEPHONE CORDS/WIRE TELEPHONES & ANSWERING MACHIN
Sort By:
1
Halex 97521 Insulated Conduit Bushing Halex 71205B 2-Hole Conduit Strap Halex 61612B 2-Hole Snap-On Conduit Strap
High impact thermoplastic. Flame retardant to 105 degrees C. Use with locknut to terminate threaded Rigid or IMC conduit to an outlet box. The rounded surface of the bushing prevents damage to wire insulation. Required by the NEC. UL Listed, CSA Approved. Indoor or outdoor applications. Use to secure PVC conduit to wood, masonry or similar surface. Bulk packed. To support EMT conduit where greater load bearing is required. Indoor or outdoor applications.
Halex 97522 Insulated Conduit Bushing Halex 71210B 2-Hole Conduit Strap Halex 97525 Insulated Conduit Bushing
High impact thermoplastic. Flame retardant to 105 degrees C. Use with locknut to terminate threaded Rigid or IMC conduit to an outlet box. The rounded surface of the bushing prevents damage to wire insulation. Required by the NEC. UL Listed, CSA Approved. Indoor or outdoor applications. Use to secure PVC conduit to wood, masonry or similar surface. Bulk packed. High impact thermoplastic. Flame retardant to 105 degrees C. Use with locknut to terminate threaded Rigid or IMC conduit to an outlet box. The rounded surface of the bushing prevents damage to wire insulation. Required by the NEC. UL Listed, CSA Approved.
Halex 71212B 2-Hole Conduit Strap Halex 96163 2-Hole Snap-On Conduit Strap Carlon Snap Strap E978DC-CAR 1-Hole Single Conduit Strap
Indoor or outdoor applications. Use to secure PVC conduit to wood, masonry or similar surface. Bulk packed. To support EMT conduit where greater load bearing is required. Indoor or outdoor applications. Safe, non-conductive. To be used in accordance with NEC, Article 347.8 conduit spacing requirements. For use with Schedule 40/80 non-metallic solvent weld fittings.
Halex 71215B 2-Hole Conduit Strap Halex 96191 Rigid IMC Conduit Locknut Carlon Snap Strap E978EC-CAR 1-Hole Single Conduit Strap
Indoor or outdoor applications. Use to secure PVC conduit to wood, masonry or similar surface. Bulk packed. Steel with zinc plating. Indoor or outdoor applications. Use to secure Rigid or IMC conduit or various threaded fittings to a steel outlet box or other metal enclosure. Safe, non-conductive. To be used in accordance with NEC, Article 347.8 conduit spacing requirements. For use with Schedule 40/80 non-metallic solvent weld fittings.
Halex 97523 Insulated Conduit Bushing Halex 96071 Knock Out Seals Halex 96072 Knock Out Seals
High impact thermoplastic. Flame retardant to 105 degrees C. Use with locknut to terminate threaded Rigid or IMC conduit to an outlet box. The rounded surface of the bushing prevents damage to wire insulation. Required by the NEC. UL Listed, CSA Approved. Use to cover exposed knock-out holes in steel outlet boxes and other metal enclosures. Use to cover exposed knock-out holes in steel outlet boxes and other metal enclosures.
Halex 96111 1-Hole Conduit Strap Halex 96192 Rigid IMC Conduit Locknut Halex 26190 Conduit Locknut
Indoor or outdoor applications. Use to secure Rigid or I.M.C. conduit to wood, masonry or similar surfaces. Steel with zinc plating. Indoor or outdoor applications. Use to secure Rigid or IMC conduit or various threaded fittings to a steel outlet box or other metal enclosure. Halex Conduit Locknut, 1/2 in Nominal, Steel, Zinc Plated, CSA Certified, UL Listed, For use to secure rigid, imc conduit or various threaded fittings to a steel outlet box or other metal enclosure, indoor/outdoor
Halex 61220B 2-Hole Conduit Strap Halex 97524 Insulated Conduit Bushing Halex 96193 Rigid Conduit Locknut
Indoor or outdoor use. Use to secure Rigid or IMC conduit to wood, masonry or similar surfaces where greater load bearing is required. UL Listed, CSA Approved. High impact thermoplastic. Flame retardant to 105 degrees C. Use with locknut to terminate threaded Rigid or IMC conduit to an outlet box. The rounded surface of the bushing prevents damage to wire insulation. Required by the NEC. UL Listed, CSA Approved. Steel with zinc plating. Indoor or outdoor applications. Use to secure Rigid or IMC conduit or various threaded fittings to a steel outlet box or other metal enclosure.
Halex 91211 Concrete Tight Set Screw Connector Halex 71220B 2-Hole Conduit Strap Halex 91221 Concrete Tight Set Screw Coupling
Zinc die cast. Use to connect EMT conduit to steel outlet box, load center or other metal enclosure. UL Approved. Indoor or outdoor applications. Use to secure PVC conduit to wood, masonry or similar surface. Bulk packed. Zinc die cast. Use to join two lengths of EMT conduit together. UL Approved.
Carlon Snap Strap E978FC-CAR 1-Hole Single Conduit Strap Halex 96121 2-Hole Conduit Strap Thomas & Betts E977DC-CTN 2-Hole Conduit Clamp
Safe, non-conductive. To be used in accordance with NEC, Article 347.8 conduit spacing requirements. For use with Schedule 40/80 non-metallic solvent weld fittings. Indoor or outdoor use. Use to secure Rigid or IMC conduit to wood, masonry or similar surfaces where greater load bearing is required. UL Listed, CSA Approved. Offers same chemical resistance as Carlon nonmetallic conduit for a complete, corrosion resistant system. UV resistant for use in direct sunlight. Use in accordance with conduit spacing requirements per NEC. Each clamp requires 2 screws, 2 nuts, and 2 washers. Gray clamps for standard conduit.
Halex 96151 1-Hole Snap-On Conduit Strap Halex 96780 Conduit Hanger Halex 96161 2-Hole Snap-On Conduit Strap
Indoor or outdoor applications. To support EMT conduit. Use to secure and suspend conduit from overhead supports. Comes with a nut and bolt. To support EMT conduit where greater load bearing is required. Indoor or outdoor applications.
Halex 96112 1-Hole Conduit Strap Halex 96194 Rigid IMC Conduit Locknut Halex 96213 1-Hole Cable Strap
Indoor or outdoor applications. Use to secure Rigid or I.M.C. conduit to wood, masonry or similar surfaces. Steel with zinc plating. Indoor or outdoor applications. Use to secure Rigid or IMC conduit or various threaded fittings to a steel outlet box or other metal enclosure. Steel, use to secure BX cable to wood, masonry or similar surface.
Halex 96781 Conduit Hanger Halex 91212 Concrete Tight Set Screw Connector Thomas & Betts E977EC-CTN 2-Hole Conduit Clamp
Use to secure and suspend conduit from overhead supports. Comes with a nut and bolt. Zinc die cast. Use to connect EMT conduit to steel outlet box, load center or other metal enclosure. UL Approved. Offers same chemical resistance as Carlon nonmetallic conduit for a complete, corrosion resistant system. UV resistant for use in direct sunlight. Use in accordance with conduit spacing requirements per NEC. Each clamp requires 2 screws, 2 nuts, and 2 washers. Gray clamps for standard conduit.
Halex 96122 2-Hole Conduit Strap Halex 90211 Compression Connector Halex 91222 Concrete Tight Set Screw Coupling
Indoor or outdoor use. Use to secure Rigid or IMC conduit to wood, masonry or similar surfaces where greater load bearing is required. UL Listed, CSA Approved. Zinc die cast. Use to connect EMT conduit to steel outlet box, load center or other metal enclosure. UL Approved. Zinc die cast. Use to join two lengths of EMT conduit together. UL Approved.
Halex 96162 2-Hole Snap-On Conduit Strap Halex 96195 Rigid Conduit Locknut STRAP CBL 1HOLE SRVC ENT
To support EMT conduit where greater load bearing is required. Indoor or outdoor applications. Steel with zinc plating. Indoor or outdoor applications. Use to secure Rigid or IMC conduit or various threaded fittings to a steel outlet box or other metal enclosure. Indoors or outdoors. Steel, use to secure service entrance cable (SEU, SER) to wood, masonry or similar surface.
Halex 12110 Concrete Tight Set Screw Connector Halex 96152 1-Hole Snap-On Conduit Strap Halex 26155 1-Hole Snap-On Conduit Strap
Zinc die cast. Use to connect EMT conduit to steel outlet box, load center or other metal enclosure. UL Approved. Indoor or outdoor applications. To support EMT conduit. Indoor or outdoor applications. To support EMT conduit.
Halex 26071 Knock Out Seals Halex 97526 Insulated Conduit Bushing Halex 90221 Concrete Tight Compression Coupling
Use to cover exposed knock-out holes in steel outlet boxes and other metal enclosures. High impact thermoplastic. Flame retardant to 105 degrees C. Use with locknut to terminate threaded Rigid or IMC conduit to an outlet box. The rounded surface of the bushing prevents damage to wire insulation. Required by the NEC. UL Listed, CSA Approved. Use to join two lengths of EMT conduit together. Zinc. UL, CSA Approved.
Halex 26211 1-Hole Conduit Strap Halex 90212 Concrete Tight Rain Tight Compression Connector Halex 12210B Concrete Tight Set Screw Coupling
Steel, use to secure BX cable to wood, masonry or similar surface. Zinc die cast. Use to connect EMT conduit to steel outlet box, load center or other metal enclosure. UL Approved. Zinc die cast. Use to join two lengths of EMT conduit together. UL Approved.
Despard K1I 1-Hole Standard Wall Plate Despard K3I 3-Hole Standard Wall Plate Despard K2I 2-Hole Standard Wall Plate
Switch plate with horizontal one opening, two opening and three opening sizes. Older style device with a rounded shape that is slightly flattened top and bottom. Interchangeable, supplied with mounting straps. Flexible, smaller than a standard duplex receptacle device, fits in a smaller opening. Used in locations with limited space or restricted options. Openings are 11/16" high x 29/32" wide. UL Listed, CSA Certified. Switch plate with horizontal one opening, two opening and three opening sizes. Older style device with a rounded shape that is slightly flattened top and bottom. Interchangeable, supplied with mounting straps. Flexible, smaller than a standard duplex receptacle device, fits in a smaller opening. Used in locations with limited space or restricted options. Openings are 11/16" high x 29/32" wide. UL Listed, CSA Certified. Switch plate with horizontal one opening, two opening and three opening sizes. Older style device with a rounded shape that is slightly flattened top and bottom. Interchangeable, supplied with mounting straps. Flexible, smaller than a standard duplex receptacle device, fits in a smaller opening. Used in locations with limited space or restricted options. Openings are 11/16" high x 29/32" wide. UL Listed, CSA Certified.
Halex 61225 2-Hole Conduit Strap Halex 26210 1-Hole Service Entrance Strap Halex 16010B Ground Clamp
To support EMT conduit where greater load bearing is required. Indoor or outdoor applications. Indoors or outdoors. Steel, use to secure service entrance cable (SEU, SER) to wood, masonry or similar surface. Indoor or outdoor applications. Use to secure the grounding wire to a 1/2" through 1" pipe. UL Listed. Wire size fits #10 - #2 AWG.
Halex 26165 2-Hole Snap-On Conduit Strap Cooper 1172V Type F Wall Jack Cooper 1172W Type F Wall Jack
To support EMT conduit where greater load bearing is required. Indoor or outdoor applications. For use with cable ready TV's, VCR's and outdoor antennas. For use with 75 ohm cable. Self-extinguishing, high impact thermoplastic meets UL 94V-O flame retardancy rating. Mounting and assembly hardware included. For use with cable ready TV's, VCR's and outdoor antennas. For use with 75 ohm cable. Self-extinguishing, high impact thermoplastic meets UL 94V-O flame retardancy rating. Mounting and assembly hardware included.
Halex 90222 Concrete Tight Compression Coupling Halex 26153 1-Hole Snap-On Conduit Strap Halex 26125 2-Hole Conduit Strap
Use to join two lengths of EMT conduit together. Zinc. UL, CSA Approved. Indoor or outdoor applications. To support EMT conduit. Indoor or outdoor use. Use to secure Rigid or IMC conduit to wood, masonry or similar surfaces where greater load bearing is required. UL Listed, CSA Approved.
Halex 03705B Concrete Tight Set Screw Conduit Offset Halex 90371 Concrete Tight Set Screw Conduit Offset Gardner Bender GGS-1512R Ground Screw
Zinc die cast. Use to connect EMT conduit to a metal outlet box or enclosure where an offset is desired. UL Approved. Zinc die cast. Use to connect EMT conduit to a metal outlet box or enclosure where an offset is desired. UL Approved. Green round washer head screw for switch and outlet boxes.
Carlon LN43DA-CTN Liquidtight Straight Angle Conduit Connector Halex 96196 Rigid IMC Conduit Locknut Carlon E977LC-CAR Conduit Clamp
For flexible conduit. Non-metallic/non-conductive, corrosion resistant plastic. Steel with zinc plating. Indoor or outdoor applications. Use to secure Rigid or IMC conduit or various threaded fittings to a steel outlet box or other metal enclosure. Offers same chemical resistance as Carlon nonmetallic conduit for a complete, corrosion resistant system. UV resistant for use in direct sunlight. Use in accordance with conduit spacing requirements per NEC. Each clamp requires 2 screws, 2 nuts, and 2 washers. Gray clamps for standard conduit.
Halex 26163 2-Hole Snap-On Conduit Strap Thomas & Betts E977FC-CTN 2-Hole Conduit Clamp Halex 26126 2-Hole Conduit Strap
To support EMT conduit where greater load bearing is required. Indoor or outdoor applications. Offers same chemical resistance as Carlon nonmetallic conduit for a complete, corrosion resistant system. UV resistant for use in direct sunlight. Use in accordance with conduit spacing requirements per NEC. Each clamp requires 2 screws, 2 nuts, and 2 washers. Gray clamps for standard conduit. Indoor or outdoor use. Use to secure Rigid or IMC conduit to wood, masonry or similar surfaces where greater load bearing is required. UL Listed, CSA Approved.
Halex 75225 Insulated Conduit Bushing Halex 02110 Compression Connector STRAP CBL 1HOLE OVAL SRVC ENT
High impact thermoplastic. Flame retardant to 105 degrees C. Use with locknut to terminate threaded Rigid or IMC conduit to an outlet box. The rounded surface of the bushing prevents damage to wire insulation. Required by the NEC. UL Listed, CSA Approved. Zinc die cast. Use to connect EMT conduit to steel outlet box, load center or other metal enclosure. UL Approved. Indoors or outdoors. Steel, use to secure service entrance cable (SEU, SER) to wood, masonry or similar surface.
Halex 90401 Offset Nipple Halex 01925B IMC Conduit Locknut Arrow Hart STE8V Mid Size Wall Plate
Zinc die cast. Use as an offset connector between two enclosures. Offsets the axis of the raceway 3/4". UL Approved. Use to secure Rigid or IMC conduit or various threaded fittings to a steel outlet box or other metal enclosure. Bulk packed. End plate. Thermoplastic construction for durability and flexibility. Easy to snap together and lock. Mid-size design to fit over most existing wall openings. Screw-Catch feature holds already attached mounting screws captive for easy installation. Screws are slotted steel, baked enamel and painted. Meets current Federal specifications as tested to UL 514. Meets all CSA requirements C22.2, No. 42.1., CSA file #9294 (4413-02), UL and cUL Listed, UL File #E33216. NEMA WD-1, WD-6. Temperature rating -40 degrees C to 65 degrees C.
Arrow Hart STE7V Mid Size Wall Plate Arrow Hart STC26V Decorative Mid Size Wall Plate WALL PLT SECT END DECR MID WHT
End plate. Thermoplastic construction for durability and flexibility. Easy to snap together and lock. Mid-size design to fit over most existing wall openings. Screw-Catch feature holds already attached mounting screws captive for easy installation. Screws are slotted steel, baked enamel and painted. Meets current Federal specifications as tested to UL 514. Meets all CSA requirements C22.2, No. 42.1., CSA file #9294 (4413-02), UL and cUL Listed, UL File #E33216. NEMA WD-1, WD-6. Temperature rating -40 degrees C to 65 degrees C. Center plate. High gloss finish. Thermoplastic construction for durability and flexibility. Easy to snap together and lock. Mid-size design to fit over most existing wall openings. Screw-Catch feature holds already attached mounting screws captive for easy installation. Screws are slotted steel, baked enamel and painted. Meets current Federal specifications as tested to UL 514 (file no. E33216). Meets CSA standard C22.2, No. 42.1, (file no.9294). NEMA WD-1, WD-6. Meets flammability requirements per UL 94, V2 rated. Temperature rating -40 degrees C to 70 degrees C. End plate. High gloss finish. Thermoplastic construction for durability and flexibility. Easy to snap together and lock. Mid-size design to fit over most existing wall openings. Screw-Catch feature holds already attached mounting screws captive for easy installation. Screws are slotted steel, baked enamel and painted. Meets current Federal specifications as tested to UL 514 (file no. E33216). Meets CSA standard C22.2, No. 42.1, (file no.9294). NEMA WD-1, WD-6. Meets flammability requirements per UL 94, V2 rated. Temperature rating -40 degrees C to 70 degrees C.
WALLPLATE SECT END DECR MID IV Arrow Hart STC26W Decorative Mid Size Wall Plate Arrow Hart STC7W Mid Size Wall Plate
End plate. High gloss finish. Thermoplastic construction for durability and flexibility. Easy to snap together and lock. Mid-size design to fit over most existing wall openings. Screw-Catch feature holds already attached mounting screws captive for easy installation. Screws are slotted steel, baked enamel and painted. Meets current Federal specifications as tested to UL 514 (file no. E33216). Meets CSA standard C22.2, No. 42.1, (file no.9294). NEMA WD-1, WD-6. Meets flammability requirements per UL 94, V2 rated. Temperature rating -40 degrees C to 70 degrees C. Center plate. High gloss finish. Thermoplastic construction for durability and flexibility. Easy to snap together and lock. Mid-size design to fit over most existing wall openings. Screw-Catch feature holds already attached mounting screws captive for easy installation. Screws are slotted steel, baked enamel and painted. Meets current Federal specifications as tested to UL 514 (file no. E33216). Meets CSA standard C22.2, No. 42.1, (file no.9294). NEMA WD-1, WD-6. Meets flammability requirements per UL 94, V2 rated. Temperature rating -40 degrees C to 70 degrees C. Center Plate. Thermoplastic construction for durability and flexibility. Easy to snap together and lock. Mid-size design to fit over most existing wall openings. Screw-Catch feature holds already attached mounting screws captive for easy installation. Screws are slotted steel, baked enamel and painted.  Meets current Federal specifications as tested to UL 514. Meets all CSA requirements C22.2, No. 42.1., CSA file #9294 (4413-02), UL and cUL Listed, UL File #E33216. NEMA WD-1, WD-6. Temperature rating -40 degrees C to 65 degrees C.
Eritech CP58 Acorn Standard Duty Ground Clamp Arrow Hart STE7W Mid Size Wall Plate Arrow Hart STC8W Mid Size Wall Plate
Connects grounding wire to the grounding rod. UL and CSA Listed for 1/2" and 5/8" ground rods and number 4 rebar and accept a conductor range from number 10 solid to number 2 stranded. End plate. Thermoplastic construction for durability and flexibility. Easy to snap together and lock. Mid-size design to fit over most existing wall openings. Screw-Catch feature holds already attached mounting screws captive for easy installation. Screws are slotted steel, baked enamel and painted. Meets current Federal specifications as tested to UL 514. Meets all CSA requirements C22.2, No. 42.1., CSA file #9294 (4413-02), UL and cUL Listed, UL File #E33216. NEMA WD-1, WD-6. Temperature rating -40 degrees C to 65 degrees C. Center Plate. Thermoplastic construction for durability and flexibility. Easy to snap together and lock. Mid-size design to fit over most existing wall openings. Screw-Catch feature holds already attached mounting screws captive for easy installation. Screws are slotted steel, baked enamel and painted. Meets current Federal specifications as tested to UL 514. Meets all CSA requirements C22.2, No. 42.1., CSA file #9294 (4413-02), UL and cUL Listed, UL File #E33216. NEMA WD-1, WD-6. Temperature rating -40 degrees C to 65 degrees C.
Arrow Hart STC8V Mid Size Wall Plate Arrow Hart STE8W Mid Size Wall Plate Arrow Hart STC7V Mid Size Wall Plate
Center Plate. Thermoplastic construction for durability and flexibility. Easy to snap together and lock. Mid-size design to fit over most existing wall openings. Screw-Catch feature holds already attached mounting screws captive for easy installation. Screws are slotted steel, baked enamel and painted. Meets current Federal specifications as tested to UL 514. Meets all CSA requirements C22.2, No. 42.1., CSA file #9294 (4413-02), UL and cUL Listed, UL File #E33216. NEMA WD-1, WD-6. Temperature rating -40 degrees C to 65 degrees C. End plate. Thermoplastic construction for durability and flexibility. Easy to snap together and lock. Mid-size design to fit over most existing wall openings. Screw-Catch feature holds already attached mounting screws captive for easy installation. Screws are slotted steel, baked enamel and painted. Meets current Federal specifications as tested to UL 514. Meets all CSA requirements C22.2, No. 42.1., CSA file #9294 (4413-02), UL and cUL Listed, UL File #E33216. NEMA WD-1, WD-6. Temperature rating -40 degrees C to 65 degrees C. Center Plate. Thermoplastic construction for durability and flexibility. Easy to snap together and lock. Mid-size design to fit over most existing wall openings. Screw-Catch feature holds already attached mounting screws captive for easy installation. Screws are slotted steel, baked enamel and painted.  Meets current Federal specifications as tested to UL 514. Meets all CSA requirements C22.2, No. 42.1., CSA file #9294 (4413-02), UL and cUL Listed, UL File #E33216. NEMA WD-1, WD-6. Temperature rating -40 degrees C to 65 degrees C.
Gardner Bender GCC-310 2-Hole Conduit Strap Halex 26154 1-Hole Snap-On Conduit Strap Halex 12112 Concrete Tight Set Screw Connector
Heavy-duty polyethylene, resists deterioration from UV rays and breakage from extreme cold. Enables secure fastening of plastic electrical conduit, schedule 40 PVC, copper tubing. Indoor or outdoor applications. To support EMT conduit. Zinc die cast. Use to connect EMT conduit to steel outlet box, load center or other metal enclosure. UL Approved.
Halex 93591 Ground Clamp Halex 67860 Conduit Hanger Halex 21210 Concrete Tight Set Screw Connector
Connects grounding wire to the grounding rod. Use to secure and suspend conduit from overhead supports. Comes with a nut and bolt. Zinc die cast. Use to connect EMT conduit to steel outlet box, load center or other metal enclosure. UL Approved.
Halex 26156 1-Hole Snap-On Conduit Strap Gardner Bender GGC-1508 Ground Clip Halex 26166 2-Hole Snap-On Conduit Strap
Indoor or outdoor applications. To support EMT conduit. For aluminum or copper grounding wire zinc plated. To support EMT conduit where greater load bearing is required. Indoor or outdoor applications.
Eritech ZWP1J Grounding Pipe Clamp Carlon LN43EA-CTN Liquidtight Straight Angle Conduit Connector Halex 03707B Concrete Tight Set Screw Conduit Offset
Bolted water pipe clamps made of zinc die-cast. Wire range 8 sol. - 2 str. UL Listed. Connects grounding wire to the grounding rod. For flexible conduit. Non-metallic/non-conductive, corrosion resistant plastic. Zinc die cast. Use to connect EMT conduit to a metal outlet box or enclosure where an offset is desired. UL Approved.
Halex 12212 Concrete Tight Set Screw Coupling Mediasync 3532-4W Standard Telephone Wall Jack Thomas & Betts E977GC-CTN 2-Hole Conduit Clamp
Zinc die cast. Use to join two lengths of EMT conduit together. UL Approved. Spring wire contacts, 0.018" diameter with gold plating over nickel to maximize contact life and reduce corrosion. High impact thermoplastic meets UL 94V-O Flame Retardency Rating as well as UL 1863 and FCC Part 68 requirements. Boxed. Offers same chemical resistance as Carlon nonmetallic conduit for a complete, corrosion resistant system. UV resistant for use in direct sunlight. Use in accordance with conduit spacing requirements per NEC. Each clamp requires 2 screws, 2 nuts, and 2 washers. Gray clamps for standard conduit.
Mediasync 3532-4V Standard Telephone Wall Jack Halex 02210 Concrete Tight Compression Coupling Halex 75230 Insulated Conduit Bushing
Spring wire contacts, 0.018" diameter with gold plating over nickel to maximize contact life and reduce corrosion. High impact thermoplastic meets UL 94V-O Flame Retardency Rating as well as UL 1863 and FCC Part 68 requirements. Boxed. Use to join two lengths of EMT conduit together. Zinc. UL, CSA Approved. High impact thermoplastic. Flame retardant to 105 degrees C. Use with locknut to terminate threaded Rigid or IMC conduit to an outlet box. The rounded surface of the bushing prevents damage to wire insulation. Required by the NEC. UL Listed, CSA Approved.
Halex 61230 2-Hole Conduit Strap AmerTac 935RW Wall Plate AmerTac 935RAL Wall Plate
Indoor or outdoor use. Use to secure Rigid or IMC conduit to wood, masonry or similar surfaces where greater load bearing is required. UL Listed, CSA Approved. With screws. 5" height x 2-3/4" width x 1/4" depth. With screws. 5" height x 2-3/4" width x 1/4" depth.
Gardner Bender GGP-1502 Grounding Pigtail Halex 26164 2-Hole Snap-On Conduit Strap Carlon Carflex LN20DA-CTN Liquidtight Conduit Elbow
AWG solid number 12 wire. 8" long with captured screw, other end bare fork terminal. To support EMT conduit where greater load bearing is required. Indoor or outdoor applications. For flexible conduit. Non-metallic, Non-conductive, corrosion resistant plastic.
Gardner Bender GCC-410 2-Hole Conduit Strap Halex 90372 Concrete Tight Set Screw Conduit Offset Halex 26073 Knock Out Seals
Heavy-duty polyethylene, resists deterioration from UV rays and breakage from extreme cold. Enables secure fastening of plastic electrical conduit, schedule 40 PVC, copper tubing. Zinc die cast. Use to connect EMT conduit to a metal outlet box or enclosure where an offset is desired. UL Approved. Use to cover exposed knock-out holes in steel outlet boxes and other metal enclosures.
Halex Straight Liquid Tight Connector Halex 91625 Multi-Piece Liquid Tight Compression Connector Halex 02905B Compression Conduit Elbow
Fitting will not rust or corrode. No disassembly required. Reusable, hand tightened nut. Use to connect type B non-metallic liquid-tight conduit to a weatherproof outlet box, pool/spa equipment motor, central air conditioning unit or various other electrical enclosures or hubs. UL Approved. Zinc die cast. Use to connect liquid-tight conduit to a steel outlet box, metal enclosure or hub. UL Approved. Zinc die cast. Concrete-tight. Indoor or outdoor applications. Use to connect EMT conduit to a metal outlet box or enclosure where a 90 degree bend is required and a pipe bending tool is not used. UL, CSA Listed.
Gardner Bender 14-GRC Ground Clamp Thomas & Betts E977HC-CTN 2-Hole Conduit Clamp Fishock GRC-FS Ground Clamp
Connects grounding wire to the grounding rod. Offers same chemical resistance as Carlon nonmetallic conduit for a complete, corrosion resistant system. UV resistant for use in direct sunlight. Use in accordance with conduit spacing requirements per NEC. Each clamp requires 2 screws, 2 nuts, and 2 washers. Gray clamps for standard conduit. Helps to make a superior connection of ground wire to ground rod. Heavy duty construction for long usage.
Gardner Bender GCC-120 2-Hole Conduit Strap CABLE AUXILIARY RETRACTABLE   Halex 16205B Multi-Piece Liquid Tight Conduit Connector
Heavy-duty polyethylene, resists deterioration from UV rays and breakage from extreme cold. Enables secure fastening of plastic electrical conduit, schedule 40 PVC, copper tubing. Retractable 3.5mm male to 3.5mm male auxiliary audio cable. Multi-piece. Zinc die cast. Use to connect liquid-tight conduit to a steel outlet box or other metal enclosure or hub. UL Listed. Bulk packed.
Gardner Bender GCC-510 2-Hole Conduit Strap Gardner Bender GCC-220 2-Hole Conduit Strap Halex 27621 Multi-Piece Liquid Tight Straight Conduit Connector
Heavy-duty polyethylene, resists deterioration from UV rays and breakage from extreme cold. Enables secure fastening of plastic electrical conduit, schedule 40 PVC, copper tubing. Heavy-duty polyethylene, resists deterioration from UV rays and breakage from extreme cold. Enables secure fastening of plastic electrical conduit, schedule 40 PVC, copper tubing. Fitting will not rust or corrode. No disassembly required. Reusable, hand tightened nut. Use to connect type B non-metallic liquid-tight conduit to a weatherproof outlet box, pool/spa equipment motor, central air conditioning unit or various other electrical enclosures or hubs. UL Approved.
Halex 90402 Offset Nipple Halex 36010 Ground Clamp Carlon Carflex LN20EA-CTN Liquidtight Conduit Elbow
Zinc die cast. Use as an offset connector between two enclosures. Offsets the axis of the raceway 3/4". UL Approved. Indoor or outdoor applications. Use to secure the grounding wire to a 1/2" through 1" pipe. UL Listed. Wire size fits #10 - #2 AWG. For flexible conduit. Non-metallic, Non-conductive, corrosion resistant plastic.
Halex 64405 Conduit Elbow Halex 12215 Concrete Tight Set Screw Coupling Aspire 9521 Decorative Mid Size Screwless Wall Plate
To connect EMT conduit together to allow for 90 degree bends. UL Approved. Zinc die cast. Use to join two lengths of EMT conduit together. UL Approved. Screwless mid-size wall plates are virtually unbreakable and present a clean, minimalist look that can be changed in seconds. Easy installation, simply screw the mounting plate onto the wiring device and press into place. Mid-size.
Aspire 9521 Decorative Mid Size Screwless Wall Plate Aspire 9521 Decorative Mid Size Screwless Wall Plate Halex 14405 Pull Conduit Elbow
Screwless mid-size wall plates are virtually unbreakable and present a clean, minimalist look that can be changed in seconds. Easy installation, simply screw the mounting plate onto the wiring device and press into place. Mid-size. Screwless mid-size wall plates are virtually unbreakable and present a clean, minimalist look that can be changed in seconds. Easy installation, simply screw the mounting plate onto the wiring device and press into place. Mid-size. Zinc die cast. Removable steel cover facilitates wire pulling. Use to connect EMT conduit together at a 90 degree bend. Tray box.
Thomas & Betts E977JCR-CTN 2-Hole Conduit Clamp LOCK NUT SEALER 1/2IN         Halex 26074 Knock Out Seals
LOCK NUT SEALER 1/2IN
Our Price: $3.36
Offers same chemical resistance as Carlon nonmetallic conduit for a complete, corrosion resistant system. UV resistant for use in direct sunlight. Use in accordance with conduit spacing requirements per NEC. Each clamp requires 2 screws, 2 nuts, and 2 washers. Gray clamps for standard conduit. Secures rigid or IMC conduit, or threaded fittings to steel outlet boxes or other steel boxes where moisture proofing is needed. Steel with zinc plating, pre-molded seal on one side. Use to cover exposed knock-out holes in steel outlet boxes and other metal enclosures.
Zenith VA1002RG6CR Type F Coaxial Connector Zenith VA1002RG6FT Type F Coaxial Connector Halex 12115 Concrete Tight Set Screw Connector
Connects to RG6 coax cable. Crimping tool required. .87" height x .5" width x .5" depth. Connects two coaxial cables. .75" height x .5" width x .5" depth. Zinc die cast. Use to connect EMT conduit to steel outlet box, load center or other metal enclosure. UL Approved.
AmerTac 935TAL Wall Plate AmerTac 935TW Rectangular Wall Plate Zenith TS1001CW In-Line Coupler
With screws. 5" height x 2-3/4" width x 1/4" depth. With screws. 5" height x 2-3/4" width x 1/4" depth. Connects two modular line cords. .87" height x 1.37" width x 0.5" depth.
Halex 02112 Compression Connector Arrow Hart PJS8 Mid Size Screwless Wall Plate Arrow Hart PJS8 Mid Size Screwless Wall Plate
Zinc die cast. Use to connect EMT conduit to steel outlet box, load center or other metal enclosure. UL Approved. Molded from non-flammable Polycarbonate. Virtually unbreakable, with high structural rigidity, long-term form retention and superior impact and abrasion resistance. Screwless mid-size duplex receptacle plate, clearly marked top edges, clip easily into place with gentle pressure. Mid-sized to cover wall imperfections and large wallboard openings. Mid-size - 4.875" x 3.125". Molded from non-flammable Polycarbonate. Virtually unbreakable, with high structural rigidity, long-term form retention and superior impact and abrasion resistance. Screwless mid-size duplex receptacle plate, clearly marked top edges, clip easily into place with gentle pressure. Mid-sized to cover wall imperfections and large wallboard openings. Mid-size - 4.875" x 3.125".
Zenith VA1002RG6TW Type F Coaxial Connector Carlon 12005-UPC Flexible Raceway Halex 90292 Concrete Tight Compression Short Radius Conduit Elbow
Connects to coax cable without tools. .75" height x .5" width x .5" depth. Designed for use with 90 degree Celsius conductors, the hand bendable conduit offers the safety of assured grounding. For 600 volt use in walls, floors and ceilings in residential, commercial and industrial buildings not more than three floors above grade. Colored in brilliant electric blue. For indoor use. UL Listed. Zinc die cast. Concrete-tight. Indoor or outdoor applications. Use to connect EMT conduit to a metal outlet box or enclosure where a 90 degree bend is required and a pipe bending tool is not used. UL, CSA Listed.
Halex 90291 Concrete Tight Compression Short Radius Conduit Elbow RECEPTACLE SGL LT ALMOND 125V Arrow Hart 1877  Single Receptacle
Zinc die cast. Concrete-tight. Indoor or outdoor applications. Use to connect EMT conduit to a metal outlet box or enclosure where a 90 degree bend is required and a pipe bending tool is not used. UL, CSA Listed. Meets all UL 498 requirements. Triple wire line contacts provide excellent long-term plug retention. Arc-resistant thermostat face. Side wire terminals accept up to #10 solid or stranded wire. Terminal screws backed out. Tamper resistant receptacles have a UL Listed shutter system. 20 amp, 125 volt. Meets all UL 498 requirements. Triple wire line contacts provide excellent long-term plug retention. Arc-resistant thermostat face. Side wire terminals accept up to #10 solid or stranded wire. Terminal screws backed out. Tamper resistant receptacles have a UL Listed shutter system. 20 amp, 125 volt.
Arrow Hart 1877  Single Receptacle Arrow Hart 1877W  Single Receptacle Eritech CWP1J Grounding Pipe Clamp
Meets all UL 498 requirements. Triple wire line contacts provide excellent long-term plug retention. Arc-resistant thermostat face. Side wire terminals accept up to #10 solid or stranded wire. Terminal screws backed out. Tamper resistant receptacles have a UL Listed shutter system. 20 amp, 125 volt. Meets all UL 498 requirements. Triple wire line contacts provide excellent long-term plug retention. Arc-resistant thermostat face. Side wire terminals accept up to #10 solid or stranded wire. Terminal screws backed out. Tamper resistant receptacles have a UL Listed shutter system. 20 amp, 125 volt. Bolted water pipe grounding clamp. UL listed. Made of corrosion-resistant copper alloy.
Halex 21212 Concrete Tight Set Screw Connector Gardner Bender GCC-610 2-Hole Conduit Strap Halex 26075 Knock Out Seals
Zinc die cast. Use to connect EMT conduit to steel outlet box, load center or other metal enclosure. UL Approved. Heavy-duty polyethylene, resists deterioration from UV rays and breakage from extreme cold. Enables secure fastening of plastic electrical conduit, schedule 40 PVC, copper tubing. Use to cover exposed knock-out holes in steel outlet boxes and other metal enclosures.
Zenith TS1001SPJ2W 2-Way Duplex Telephone Splitter American Tack and Hdwe VM1002RG6BU Zenith Coaxial Bushings Arrow Hart PJS26 Decorative Screwless Wall Plate
Split one connection into two. Four conductor construction. Allows for up to three different phone lines. .75" height x 1" width x 1.5" depth. Allows coax cable to feed through wall an internal or external wall. 1.17" height x 1.17" width x 1.17" depth. Screwless mid-size wall plate, virtually unbreakable and present a clean, minimalist look that can be changed in seconds. Easy installation, simply screw the mounting plate onto the wiring device and press into place. 4.875" x 3.125".
Arrow Hart PJS26 Decorative Screwless Wall Plate Halex 02212 Concrete Tight Compression Coupling Halex 12120 Concrete Tight Set Screw Connector
Screwless mid-size wall plate, virtually unbreakable and present a clean, minimalist look that can be changed in seconds. Easy installation, simply screw the mounting plate onto the wiring device and press into place. 4.875" x 3.125". Use to join two lengths of EMT conduit together. Zinc. UL, CSA Approved. Zinc die cast. Use to connect EMT conduit to steel outlet box, load center or other metal enclosure. UL Approved.
Halex 64505 Conduit Elbow Halex 27622 Multi-Piece Liquid Tight Straight Conduit Connector Halex 64507 Conduit Elbow
To connect EMT conduit together to allow for 45 degree bends. Fitting will not rust or corrode. No disassembly required. Reusable, hand tightened nut. Use to connect type B non-metallic liquid-tight conduit to a weatherproof outlet box, pool/spa equipment motor, central air conditioning unit or various other electrical enclosures or hubs. UL Approved. To connect EMT conduit together to allow for 45 degree bends.
Halex 14407 Pull Conduit Elbow CABLE MICRO USB CHARGER 3FT   Zenith TS1001SPJ3W Duplex Telephone Splitter
Zinc die cast. Removable steel cover facilitates wire pulling. Use to connect EMT conduit together at a 90 degree bend. Tray box. USB charge and sync data cord. Split one connection into three. Four conductor construction. Allows for up to three different phone lines. .75" height x 1.5" width x 1.5" depth.
Halex 61820B IMC Sealer Locknut Jandorf 61014 Single Electrical Receptacle Jandorf 61015 Single Electrical Receptacle
Secures rigid or IMC conduit, or threaded fittings to steel outlet boxes or other steel boxes where moisture proofing is needed. Steel with zinc plating, pre-molded seal on one side. Jandorf Electrical Receptacle, Single, 2 Poles, 2 Wires, 15 A, 125 V, Black, CSA Certified, For Indoor Use Jandorf Electrical Receptacle, Single, 2 Poles, 2 Wires, 15 A, 125 V, White, CSA Certified, For Indoor Use
Halex 93592 Ground Clamp Halex 12220 Concrete Tight Set Screw Coupling Halex 26141 Flat Drive Strap
Connects grounding wire to the grounding rod. Zinc die cast. Use to join two lengths of EMT conduit together. UL Approved. Indoors or outdoors. To secure EMT conduit to a wood or masonry surface.
Halex 26151 1-Hole Snap-On Conduit Strap Halex 61130 1-Hole Conduit Strap Zenith TM1001SMSMW Small Wall Jack
Indoor or outdoor applications. To support EMT conduit. Steel, indoor or outdoor. Use to secure Rigid or IMC conduit to wood, masonry or similar surfaces where greater load bearing is required. Tray boxed. Small surface mount wall jack, 4 wire. 2" height x 1.25" width x 0.75" depth.
Zenith VA1001RG6QP Type F Coaxial Adapter Zenith VA1001RG6RA Type F Coaxial Connector Arrow Hart 817  Single Receptacle
Allows quick connect and disconnect of coax cable. .87" height x .5" width x .5" depth. For use in hard to reach spaces. Repositions cable jack for easy access. Plug and play. .87" height x .67" width x .37" depth. Meets all UL 498 requirements. Triple wire line contacts provide excellent long-term plug retention. Arc-resistant thermostat face. Side wire terminals accept up to #10 solid or stranded wire. Terminal screws backed out. Tamper resistant receptacles have a UL Listed shutter system. cULus Listed. 15 amp, 125 volt.
Arrow Hart 817W  Single Receptacle Halex Liquid Tight Connector Halex 27691 Liquid Tight Conduit Elbow
Meets all UL 498 requirements. Triple wire line contacts provide excellent long-term plug retention. Arc-resistant thermostat face. Side wire terminals accept up to #10 solid or stranded wire. Terminal screws backed out. Tamper resistant receptacles have a UL Listed shutter system. cULus Listed. 15 amp, 125 volt. Indoors or outdoors, fitting will not rust or corrode. No disassembly required, just hand-tighten nut. Reusable. Use to connect type B non-metallic liquid-tight conduit to a weatherproof outlet box, pool/spa equipment motor, central air conditioning unit or various other electrical enclosures or hubs. UL Approved. Indoors or outdoors, fitting will not rust or corrode. No disassembly required, just hand-tighten nut. Reusable. Use to connect type B non-metallic liquid-tight conduit to a weatherproof outlet box, pool/spa equipment motor, central air conditioning unit or various other electrical enclosures or hubs. UL Approved.
Arrow Hart 816  Single Receptacle Arrow Hart 816  Single Receptacle Halex 16207B Multi-Piece Liquid Tight Conduit Connector
Meets all UL 498 requirements. Triple wire line contacts provide excellent long-term plug retention. Arc-resistant thermostat face. Side wire terminals accept up to #10 solid or stranded wire. Terminal screws backed out. 15 amp, 250 volt. Meets all UL 498 requirements. Triple wire line contacts provide excellent long-term plug retention. Arc-resistant thermostat face. Side wire terminals accept up to #10 solid or stranded wire. Terminal screws backed out. 15 amp, 250 volt. Multi-piece. Zinc die cast. Use to connect liquid-tight conduit to a steel outlet box or other metal enclosure or hub. UL Listed. Bulk packed.
Halex 26152 1-Hole Snap-On Conduit Strap Halex 26161 2-Hole Snap-On Conduit Strap Atron 163TBR Square Corner Traditional Wall Plate
Indoor or outdoor applications. To support EMT conduit. To support EMT conduit where greater load bearing is required. Indoor or outdoor applications. Traditional square corner design. With screws.
AmerTac Amerelle Traditional 161RR Square Corner Wall Plate AmerTac 161T Wall Plate AmerTac Traditional 161R Decorative Square Corner Wall Plate
Traditional square corner design. With screws. 5" height x 4-5/8" width x 1/4" depth. Traditional square corner design. With screws. 5" height x 2-7/8" width x 1/4" depth. Traditional square corner design. With screws. 5" height x 2-7/8" width x 1/4" depth.
AmerTac Traditional 163RBR Decorative Square Corner Wall Plate Halex 02115 Compression Connector Halex 91627 Multi-Piece Liquid Tight Conduit Connector
Traditional square corner design. With screws. Zinc die cast. Use to connect EMT conduit to steel outlet box, load center or other metal enclosure. UL Approved. Zinc die cast. Use to connect liquid-tight conduit to a steel outlet box, metal enclosure or hub. UL Approved.
Halex 64407 Conduit Elbow Halex 20210 Concrete Tight Compression Connector Claro Maestro CW Rectangular Screwless Seamless Wall Plate
To connect EMT conduit together to allow for 90 degree bends. UL Approved. Zinc die cast. Use to connect EMT conduit to steel outlet box, load center or other metal enclosure. UL Approved. Designed to match designer opening dimmers, sensors, fan controls, switches and accessories. Clean appearance with no visible screws. Mounts flush to the wall. Oversized to hide gaps around wallboxes. Snap-on design attaches securely and snugly in place regardless of wall condition.
Zenith TW1001SW Single Wall Jack Halex 21222 Concrete Tight Set Screw Coupling Halex 26162 2-Hole Snap-On Conduit Strap
Connects phone wire through a wall. 4.5" height x 2.75" width x .75" depth. Zinc die cast. Use to join two lengths of EMT conduit together. UL Approved. To support EMT conduit where greater load bearing is required. Indoor or outdoor applications.
AmerTac 935TTW Wall Plate AmerTac Zenith TL1007W Telephone Cord Arrow Hart PJ8EMRD Mid Size Wall Plate
With screws. 5" height x 4-5/8" width x 1/4" depth. Connects phone or modem to phone outlet. Molded from non-flammable Polycarbonate, pre-marked "EMERGENCY" with indelible printing guaranteed not to fade, bleed or rub off. High letters for easy identification. Virtually unbreakable, with high structural rigidity, long-term form retention and superior impact and abrasion resistance. Screw-catch feature holds mounting screws captive and simplifies installation. Matching screws provided. High gloss finish is soil resistant. Mid-size - 3.125" x 4.875".
Halex 14605 Inside Corner Pull Conduit Elbow Halex 26076 Knock Out Seals Halex 21211 Concrete Tight Set Screw Connector
Zinc die-cast. Removable steel cover facilitates wire pulling. Use to connect EMT conduit together at an inside corner. UL listed, CSA Approved. Tray boxed. Use to cover exposed knock-out holes in steel outlet boxes and other metal enclosures. Zinc die cast. Use to connect EMT conduit to steel outlet box, load center or other metal enclosure. UL Approved.
Zenith VS1001SP2W 2-Way Coaxial Splitter Halex 36019 Ground Clamp Gardner Bender PEC-31525 Coaxial Cable Clamp
Gold plated, 75 ohm, 1000Hz. Splits one coax cable signal into two. 1.25" height x 2" width x 0.5" depth. Indoor or outdoor applications. Use to secure the grounding wire to a 1/2" through 1" pipe. UL Listed. Wire size fits #10 - #2 AWG. Secures RG-59, RG-6 coaxial. Combo screw for safer installs. Screw-in depth of 1/2".
AmerTac Zenith TL1012W Telephone Cord Jandorf 61016 Single Electrical Receptacle Jandorf 61017 Single Electrical Receptacle