Home > ELECTRICAL > SPECIALTY ELECTRICAL > FIRE/HOME PROTECTION > SECURITY SUVEILLANCE - SMART
Choose a sub category:
EMT FITTINGS - COMPRESSION EMT FITTINGS - SET SCREW EMT FITTINGS - RAIN TIGHT
Sort By:
1
Arrow Hart 2131 Standard Wall Plate Arrow Hart 2131V-BOX Round Wall Plate Cooper 270B Grounded  Duplex Receptacle
Molded from non-flammable thermoset. Flush fitting, warp resistant design. Screw-catch feature holds mounting screws captive and simplifies installation. Matching screws provided. High gloss finish is soil resistant. Standard size - 2.75" x 4.50", boxed. Molded from non-flammable thermoset. Flush fitting, warp resistant design. Screw-catch feature holds mounting screws captive and simplifies installation. Matching screws provided. High gloss finish is soil resistant. Standard size - 2.75" x 4.50", boxed. Built-in wire stripper for number 14 wire. Built-in wire looper for pre-looping conductors. Screw-catch feature eliminates need to hand-thread screw and possible cross-threading. Double wipe ground contacts. Split circuit break-off tab. Side wire terminals accept up to number 10 solid or stranded wire. Push-in terminals accept number 14 solid wire only. 15 amp/125 volt. UL Listed, NOM certified, meets CSA requirements.
Cooper 270V Grounded  Duplex Receptacle Cooper 270W Grounded  Duplex Receptacle RECEPTACLE DUPLEX 15A 125V LA
Built-in wire stripper for number 14 wire. Built-in wire looper for pre-looping conductors. Screw-catch feature eliminates need to hand-thread screw and possible cross-threading. Double wipe ground contacts. Split circuit break-off tab. Side wire terminals accept up to number 10 solid or stranded wire. Push-in terminals accept number 14 solid wire only. 15 amp/125 volt. UL Listed, NOM certified, meets CSA requirements. Built-in wire stripper for number 14 wire. Built-in wire looper for pre-looping conductors. Screw-catch feature eliminates need to hand-thread screw and possible cross-threading. Double wipe ground contacts. Split circuit break-off tab. Side wire terminals accept up to number 10 solid or stranded wire. Push-in terminals accept number 14 solid wire only. 15 amp/125 volt. UL Listed, NOM certified, meets CSA requirements. Built-in wire stripper for number 14 wire. Built-in wire looper for pre-looping conductors. Screw-catch feature eliminates need to hand-thread screw and possible cross-threading. Double wipe ground contacts. Split circuit break-off tab. Side wire terminals accept up to number 10 solid or stranded wire. Push-in terminals accept number 14 solid wire only. 15 amp/125 volt. UL Listed, NOM certified, meets CSA requirements.
Halex 90701 Conduit Chase Nipple WALLPLATE RCPT LT ALMOND 1G   Halex 91321 Reducing Conduit Bushing
Zinc die cast. Indoor or outdoor applications. Use to terminate threaded conduit to a knockout box or enclosure, where space within the box is limited. Used with a locknut to provide a short raceway between boxes or enclosures. UL and CSA approved. Virtually unbreakable, with high structural rigidity, long-term form retention and impact and abrasion resistance. Screw-catch feature holds mounting screws captive. Matching screws provided. High gloss finish is soil resistant. Mid-size - 3.125" x 4.875". Zinc die cast. Indoor or outdoor applications. Use to reduce the entry size of a run of threaded conduit. UL Approved.
Halex 91641 Box Spacer Halex 90211 Compression Connector Cooper TR270W  Tamper Resistant Duplex Receptacle
Die cast of high strength corrosion resistant zinc alloy. Locknut is reversible. It is designed to cut through protective coatings on boxes and enclosures to assure ground continuity. Use as a raceway between two steel outlet boxes or other metal enclosures. UL and CSA Listed. Zinc die cast. Use to connect EMT conduit to steel outlet box, load center or other metal enclosure. UL Approved. Receptacle is tamper resistant with a UL Listed shutter system and impact-resistant thermoplastic face and back body that is virtually unbreakable. The 2008 National Electrical Code (NEC) states that "Effective January 1, 2008, all receptacles installed in new dwelling units must be tamper-resistant." Features a wire stripper for #14 and #12 wire, extra long and wide mounting straps and tri-combo screws that accept slotted, Phillips and Robertson-head tools. Terminal screws are backed out and ready to wire. Side-wire terminals accept up to #10 solid or stranded wire. Push in terminals accept #14 solid wire. Screw-catch feature speeds wall plate installation. UL, cULus Listed.
Cooper TR270V  Tamper Resistant Duplex Receptacle Halex 91331 Reducing Conduit Bushing Halex 16405B Box Spacer
Receptacle is tamper resistant with a UL Listed shutter system and impact-resistant thermoplastic face and back body that is virtually unbreakable. The 2008 National Electrical Code (NEC) states that "Effective January 1, 2008, all receptacles installed in new dwelling units must be tamper-resistant." Features a wire stripper for #14 and #12 wire, extra long and wide mounting straps and tri-combo screws that accept slotted, Phillips and Robertson-head tools. Terminal screws are backed out and ready to wire. Side-wire terminals accept up to #10 solid or stranded wire. Push in terminals accept #14 solid wire. Screw-catch feature speeds wall plate installation. UL, cULus Listed. Zinc die cast. Indoor or outdoor applications. Use to reduce the entry size of a run of threaded conduit. UL Approved. Zinc die cast. Use as a raceway between two steel outlet boxes or other metal enclosures. UL Listed. Bulk packed.
Halex 91332 Reducing Conduit Bushing Cooper TR270V Tamper Resistant Duplex Receptacle Cooper TR270W Tamper Resistant Duplex Receptacle
Zinc die cast. Indoor or outdoor applications. Use to reduce the entry size of a run of threaded conduit. UL Approved. Receptacle is tamper resistant with a UL Listed shutter system and impact-resistant thermoplastic face and back body that is virtually unbreakable. The 2008 National Electrical Code (NEC) states that "Effective January 1, 2008, all receptacles installed in new dwelling units must be tamper-resistant." Features a wire stripper for #14 and #12 wire, extra long and wide mounting straps and tri-combo screws that accept slotted, Phillips and Robertson-head tools. Terminal screws are backed out and ready to wire. Side-wire terminals accept up to #10 solid or stranded wire. Push in terminals accept #14 solid wire. Screw-catch feature speeds wall plate installation. UL, cULus Listed. Receptacle is tamper resistant with a UL Listed shutter system and impact-resistant thermoplastic face and back body that is virtually unbreakable. The 2008 National Electrical Code (NEC) states that "Effective January 1, 2008, all receptacles installed in new dwelling units must be tamper-resistant." Features a wire stripper for #14 and #12 wire, extra long and wide mounting straps and tri-combo screws that accept slotted, Phillips and Robertson-head tools. Terminal screws are backed out and ready to wire. Side-wire terminals accept up to #10 solid or stranded wire. Push in terminals accept #14 solid wire. Screw-catch feature speeds wall plate installation. UL, cULus Listed.
RECEPTACLE DUPLEX LIGHT ALMOND Halex 64005 Conduit Coupling Halex 90221 Concrete Tight Compression Coupling
Receptacle is tamper resistant with a UL Listed shutter system and impact-resistant thermoplastic face and back body that is virtually unbreakable. The 2008 National Electrical Code (NEC) states that "Effective January 1, 2008, all receptacles installed in new dwelling units must be tamper-resistant." Features a wire stripper for #14 and #12 wire, extra long and wide mounting straps and tri-combo screws that accept slotted, Phillips and Robertson-head tools. Terminal screws are backed out and ready to wire. Side-wire terminals accept up to #10 solid or stranded wire. Push in terminals accept #14 solid wire. Screw-catch feature speeds wall plate installation. UL, cULus Listed. Steel, indoor or out. Use to join threaded Rigid or IMC conduit together. UL Listed. Use to join two lengths of EMT conduit together. Zinc. UL, CSA Approved.
Halex 90212 Concrete Tight Rain Tight Compression Connector Halex 90702 Conduit Chase Nipple Halex 90222 Concrete Tight Compression Coupling
Zinc die cast. Use to connect EMT conduit to steel outlet box, load center or other metal enclosure. UL Approved. Zinc die cast. Indoor or outdoor applications. Use to terminate threaded conduit to a knockout box or enclosure, where space within the box is limited. Used with a locknut to provide a short raceway between boxes or enclosures. UL and CSA approved. Use to join two lengths of EMT conduit together. Zinc. UL, CSA Approved.
Arrow Hart CR15W  Duplex Receptacle Halex 96401 Conduit Coupling Cooper 736B-BOX  Duplex Receptacle
Triple wipe line contacts provide long-term plug retention. Double wipe ground contacts. 0.050" thick steel wrap-around mounting strap zinc-plated for corrosion resistance. Split circuit break-off tab. Automatic grounding system eliminates need for bonding jumper in grounded metal enclosure. Side wire terminals accept up to #10 solid or stranded wire. Meets all UL 498 requirements UL Listed. Steel, indoor or out. Use to join threaded Rigid or IMC conduit together. UL Listed. Standard contacts. Side wire terminals accept up to #12 wire. Terminal screws backed out, ready for wiring. 15 amp/125 volt. UL Listed.
Cooper 736V-BOX  Duplex Receptacle Cooper 736W-BOX  Duplex Receptacle Halex 16407B Box Spacer
Standard contacts. Side wire terminals accept up to #12 wire. Terminal screws backed out, ready for wiring. 15 amp/125 volt. UL Listed. Standard contacts. Side wire terminals accept up to #12 wire. Terminal screws backed out, ready for wiring. 15 amp/125 volt. UL Listed. Zinc die cast. Use as a raceway between two steel outlet boxes or other metal enclosures. UL Listed. Bulk packed.
Arrow Hart CR15B  Duplex Receptacle Arrow Hart CR15V  Duplex Receptacle Halex 02110 Compression Connector
Triple wipe line contacts provide long-term plug retention. Double wipe ground contacts. 0.050" thick steel wrap-around mounting strap zinc-plated for corrosion resistance. Split circuit break-off tab. Automatic grounding system eliminates need for bonding jumper in grounded metal enclosure. Side wire terminals accept up to #10 solid or stranded wire. Meets all UL 498 requirements UL Listed. Triple wipe line contacts provide long-term plug retention. Double wipe ground contacts. 0.050" thick steel wrap-around mounting strap zinc-plated for corrosion resistance. Split circuit break-off tab. Automatic grounding system eliminates need for bonding jumper in grounded metal enclosure. Side wire terminals accept up to #10 solid or stranded wire. Meets all UL 498 requirements UL Listed. Zinc die cast. Use to connect EMT conduit to steel outlet box, load center or other metal enclosure. UL Approved.
Halex 90401 Offset Nipple Arrow Hart STC1V Mid Size Wall Plate Arrow Hart STC1W Mid Size Wall Plate
Zinc die cast. Use as an offset connector between two enclosures. Offsets the axis of the raceway 3/4". UL Approved. Center Plate. Thermoplastic construction for durability and flexibility. Easy to snap together and lock. Mid-size design to fit over most existing wall openings. Screw-Catch feature holds already attached mounting screws captive for easy installation. Screws are slotted steel, baked enamel and painted. Meets current Federal specifications as tested to UL 514. Meets all CSA requirements C22.2, No. 42.1., CSA file #9294 (4413-02), UL and cUL Listed, UL File #E33216. NEMA WD-1, WD-6. Temperature rating -40 degrees C to 65 degrees C. Center Plate. Thermoplastic construction for durability and flexibility. Easy to snap together and lock. Mid-size design to fit over most existing wall openings. Screw-Catch feature holds already attached mounting screws captive for easy installation. Screws are slotted steel, baked enamel and painted. Meets current Federal specifications as tested to UL 514. Meets all CSA requirements C22.2, No. 42.1., CSA file #9294 (4413-02), UL and cUL Listed, UL File #E33216. NEMA WD-1, WD-6. Temperature rating -40 degrees C to 65 degrees C.
Arrow Hart STE14W Blank Mid Size Wall Plate Arrow Hart STE1W Mid Size Wall Plate Arrow Hart STE1V Mid Size Wall Plate
End plate, blank strap mount with metal yoke. High gloss finish. Thermoplastic construction for durability and flexibility. Easy to snap together and lock. Mid-size design to fit over most existing wall openings. Screw-Catch feature holds already attached mounting screws captive for easy installation. Screws are slotted steel, baked enamel and painted.  Meets current Federal specifications as tested to UL 514 (file no. E33216). Meets CSA standard C22.2, No. 42.1, (file no.9294). NEMA WD-1, WD-6. Meets flammability requirements per UL 94, V2 rated. Temperature rating -40 degrees C to 70 degrees C. End plate. Single toggle. Decorator style. High gloss finish. Thermoplastic construction for durability and flexibility. Easy to snap together and lock. Mid-size design to fit over most existing wall openings. Screw-catch feature holds already attached mounting screws captive for easy installation. Screws are slotted steel, baked enamel and painted. Meets current Federal specifications as tested to UL 514. Temperature rating -40 degrees C to 70 degrees C. UL Listed, meets CSA standard. NEMA WD-1, WD-6. End plate. Single toggle. Decorator style. High gloss finish. Thermoplastic construction for durability and flexibility. Easy to snap together and lock. Mid-size design to fit over most existing wall openings. Screw-catch feature holds already attached mounting screws captive for easy installation. Screws are slotted steel, baked enamel and painted. Meets current Federal specifications as tested to UL 514. Temperature rating -40 degrees C to 70 degrees C. UL Listed, meets CSA standard. NEMA WD-1, WD-6.
Arrow Hart STE14V Blank Mid Size Wall Plate Halex 96402 Conduit Coupling Arrow Hart STC14V Blank Mid Size Wall Plate
End plate, blank strap mount with metal yoke. High gloss finish. Thermoplastic construction for durability and flexibility. Easy to snap together and lock. Mid-size design to fit over most existing wall openings. Screw-Catch feature holds already attached mounting screws captive for easy installation. Screws are slotted steel, baked enamel and painted.  Meets current Federal specifications as tested to UL 514 (file no. E33216). Meets CSA standard C22.2, No. 42.1, (file no.9294). NEMA WD-1, WD-6. Meets flammability requirements per UL 94, V2 rated. Temperature rating -40 degrees C to 70 degrees C. Steel, indoor or out. Use to join threaded Rigid or IMC conduit together. UL Listed. Center plate, blank strap mount with metal yoke. High gloss finish. Thermoplastic construction for durability and flexibility. Easy to snap together and lock. Mid-size design to fit over most existing wall openings. Screw-Catch feature holds already attached mounting screws captive for easy installation. Screws are slotted steel, baked enamel and painted. Meets current Federal specifications as tested to UL 514 (file no. E33216). Meets CSA standard C22.2, No. 42.1, (file no.9294). NEMA WD-1, WD-6. Meets flammability requirements per UL 94, V2 rated. Temperature rating -40 degrees C to 70 degrees C.
Arrow Hart STC14W Blank Mid Size Wall Plate Cooper 1107V Decorator  Duplex Receptacle Cooper 1107W Grounded  Duplex Receptacle
Center plate, blank strap mount with metal yoke. High gloss finish. Thermoplastic construction for durability and flexibility. Easy to snap together and lock. Mid-size design to fit over most existing wall openings. Screw-Catch feature holds already attached mounting screws captive for easy installation. Screws are slotted steel, baked enamel and painted. Meets current Federal specifications as tested to UL 514 (file no. E33216). Meets CSA standard C22.2, No. 42.1, (file no.9294). NEMA WD-1, WD-6. Meets flammability requirements per UL 94, V2 rated. Temperature rating -40 degrees C to 70 degrees C. Longer, wider strap provides 40 percent more contact area to wall board. Virtually eliminates floating installations. Built-in wire stripper for number 14 and number 12 wire and wire looper for pre-looping. Combination slot/Phillips head mounting and terminal screws for installation with power screwdrivers. Terminal screws backed out - ready for wiring. Side wire terminals accept up to number 10 solid or stranded wire. Push-in terminals accept number 14 solid wire. Temperature range of -40 to 65 degrees C. Meets all UL 498 requirements, (file no. E15058), Fed. Specs. WC-596G, NOM Certified, CSA Certified, C22.2 no.42. Standard Grade: (file no.6914) (6233-01). Meets flammability requirements per UL94, V2 rated. 15 amp, 125 volt. Longer, wider strap provides 40 percent more contact area to wall board. Virtually eliminates floating installations. Built-in wire stripper for number 14 and number 12 wire and wire looper for pre-looping. Combination slot/Phillips head mounting and terminal screws for installation with power screwdrivers. Terminal screws backed out - ready for wiring. Side wire terminals accept up to number 10 solid or stranded wire. Push-in terminals accept number 14 solid wire. Temperature range of -40 to 65 degrees C. Meets all UL 498 requirements, (file no. E15058), Fed. Specs. WC-596G, NOM Certified, CSA Certified, C22.2 no.42. Standard Grade: (file no.6914) (6233-01). Meets flammability requirements per UL94, V2 rated. 15 amp, 125 volt.
RECEPTACLE DECOR 2P 3W 15A LA Halex 90703 Conduit Chase Nipple Halex 02210 Concrete Tight Compression Coupling
Receptacle is tamper resistant with a UL Listed shutter system and impact-resistant thermoplastic face and back body that is virtually unbreakable. The 2008 National Electrical Code (NEC) states that "Effective January 1, 2008, all receptacles installed in new dwelling units must be tamper-resistant." Features a wire stripper for number 14 and number 12 wire, extra long and wide mounting straps and tri-combo screws that accept slotted, Phillips and Robertson-head tools. Terminal screws are backed out and ready to wire. Side-wire terminals accept up to number 10 solid or stranded wire. Push in terminals accept number 14 solid wire. Screw-catch feature speeds wall plate installation. 15 amp, 125 volt. NEMA 5-15R. UL, cULus Listed. Zinc die cast. Indoor or outdoor applications. Use to terminate threaded conduit to a knockout box or enclosure, where space within the box is limited. Used with a locknut to provide a short raceway between boxes or enclosures. UL and CSA approved. Use to join two lengths of EMT conduit together. Zinc. UL, CSA Approved.
RECEPTACLE BULK LT ALMOND 20A Arrow Hart CR20W Grounded Duplex Receptacle Arrow Hart CR20V Grounded Duplex Receptacle
Triple wipe line contacts provide long-term plug retention. Double wipe ground contacts. 0.050" thick steel wrap-around mounting strap zinc-plated for corrosion resistance. Split circuit break-off tab. Automatic grounding system eliminates need for bonding jumper in grounded metal enclosure. Side wire terminals accept up to #10 solid or stranded wire. Meets all UL 498 requirements UL Listed. Triple wipe line contacts provide long-term plug retention. Double wipe ground contacts. 0.050" thick steel wrap-around mounting strap zinc-plated for corrosion resistance. Split circuit break-off tab. Automatic grounding system eliminates need for bonding jumper in grounded metal enclosure. Side wire terminals accept up to #10 solid or stranded wire. Meets all UL 498 requirements UL Listed. Triple wipe line contacts provide long-term plug retention. Double wipe ground contacts. 0.050" thick steel wrap-around mounting strap zinc-plated for corrosion resistance. Split circuit break-off tab. Automatic grounding system eliminates need for bonding jumper in grounded metal enclosure. Side wire terminals accept up to #10 solid or stranded wire. Meets all UL 498 requirements UL Listed.
Arrow Hart CR20B Grounded Duplex Receptacle Spot-Gro C270V Duplex  Electrical Receptacle Cooper C270W  Duplex Receptacle
Triple wipe line contacts provide long-term plug retention. Double wipe ground contacts. 0.050" thick steel wrap-around mounting strap zinc-plated for corrosion resistance. Split circuit break-off tab. Automatic grounding system eliminates need for bonding jumper in grounded metal enclosure. Side wire terminals accept up to #10 solid or stranded wire. Meets all UL 498 requirements UL Listed. Built-in wire stripper for number 14 wire. Built-in wire looper for pre-looping conductors. Screw-catch feature eliminates need to hand-thread screw and possible cross-threading. Double wipe ground contacts. Split circuit break-off tab. Side wire terminals accept up to number 10 solid or stranded wire. Push-in terminals accept number 14 solid wire only. 15 amp/125 volt. UL Listed, NOM certified, meets CSA requirements. Built-in wire stripper for number 14 wire. Built-in wire looper for pre-looping conductors. Screw-catch feature eliminates need to hand-thread screw and possible cross-threading. Double wipe ground contacts. Split circuit break-off tab. Side wire terminals accept up to number 10 solid or stranded wire. Push-in terminals accept number 14 solid wire only. 15 amp/125 volt. UL Listed, NOM certified, meets CSA requirements.
Halex 64010 Conduit Coupling RECEPTACLE DECO AG LT ALMOND  Cooper 1107-9BK Decorator  Duplex Receptacle
Steel, indoor or out. Use to join threaded Rigid or IMC conduit together. UL Listed. Terminal screws backed out-ready for wiring. Push-in terminals accept number 14 solid wire. Side wire terminals accept up to number 10 solid or stranded wire. Longer, wider strap provides 40 percent more contact area to wall board. Combination slot/Phillips head mounting and terminal screws ease installation with power screwdrivers. Virtually eliminates floating installations. Built-in wire stripper for number 14 and number 12 wire to speed installation. Built-in wire looper for pre-looping. Temperature range of -40 to 65 degrees C. Meets all UL 498 requirements, (file no.E15058), Fed.Specs.WC-596G, NOM Certified, CSA Certified, C22.2 no.42. Standard Grade: (file no.6914) (6233-01). Meets flammability requirements per UL94, V2 rated. 15 amp, 125 volt. Terminal screws backed out-ready for wiring. Push-in terminals accept number 14 solid wire. Side wire terminals accept up to number 10 solid or stranded wire. Longer, wider strap provides 40 percent more contact area to wall board. Combination slot/Phillips head mounting and terminal screws ease installation with power screwdrivers. Virtually eliminates floating installations. Built-in wire stripper for number 14 and number 12 wire to speed installation. Built-in wire looper for pre-looping. Temperature range of -40 to 65 degrees C. Meets all UL 498 requirements, (file no.E15058), Fed.Specs.WC-596G, NOM Certified, CSA Certified, C22.2 no.42. Standard Grade: (file no.6914) (6233-01). Meets flammability requirements per UL94, V2 rated. 15 amp, 125 volt.
Arrow Hart BR15V  Duplex Receptacle Arrow Hart BR15W  Duplex Receptacle AmerTac 935DAL Wall Plate
High impact-resistant thermoplastic face. Triple wipe line contacts for long-term plug retention. Double wipe ground contacts for ground retention. .050" thick steel wrap-around mounting strap zinc-plated for corrosion resistance. Easy access split circuit break-off tab. Automatic grounding system eliminates need for bonding jumper in grounded metal enclosure. Back and side wire terminals accept #14, #12 and #10 solid or stranded wire. Terminal screws backed out. Combination slot/Phillips head mounting and terminal screws. Meets all UL 498 requirements. Federal specifications WC-596. Bulk Pak. UL Listed. High impact-resistant thermoplastic face. Triple wipe line contacts for long-term plug retention. Double wipe ground contacts for ground retention. .050" thick steel wrap-around mounting strap zinc-plated for corrosion resistance. Easy access split circuit break-off tab. Automatic grounding system eliminates need for bonding jumper in grounded metal enclosure. Back and side wire terminals accept #14, #12 and #10 solid or stranded wire. Terminal screws backed out. Combination slot/Phillips head mounting and terminal screws. Meets all UL 498 requirements. Federal specifications WC-596. Bulk Pak. UL Listed. With screws. 5" height x 2-3/4" width x 1/4" depth.
Halex 02905B Compression Conduit Elbow Arrow Hart 93111-BOX Standard Wall Plate Arrow Hart 93091-BOX Standard Wall Plate
Zinc die cast. Concrete-tight. Indoor or outdoor applications. Use to connect EMT conduit to a metal outlet box or enclosure where a 90 degree bend is required and a pipe bending tool is not used. UL, CSA Listed. Made of Type 304 stainless steel alloy for superior non-magnetic corrosion-resistant properties. Plates are 0.032" thick. Brushed satin finish resists fingerprints. Matching stainless steel mounting screws provided. Standard size - 2.75" x 4.50", with 1.594" hole. Made of Type 304 stainless steel alloy for superior non-magnetic corrosion-resistant properties. Plates are 0.032" thick. Brushed satin finish resists fingerprints. Matching stainless steel mounting screws provided. Standard size - 2.75" x 4.50", with 1.406" hole, boxed.
Cooper TR1107W Decorative Tamper Resistant Duplex Receptacle Cooper TR1107V Decorative Tamper Resistant Duplex Receptacle CABLE AUXILIARY RETRACTABLE
Receptacle is tamper resistant with a UL Listed shutter system and impact-resistant thermoplastic face and back body that is virtually unbreakable. The 2008 National Electrical Code (NEC) states that "Effective January 1, 2008, all receptacles installed in new dwelling units must be tamper-resistant." Features a wire stripper for number 14 and number 12 wire, extra long and wide mounting straps and tri-combo screws that accept slotted, Phillips and Robertson-head tools. Terminal screws are backed out and ready to wire. Side-wire terminals accept up to number 10 solid or stranded wire. Push in terminals accept number 14 solid wire. Screw-catch feature speeds wall plate installation. 15 amp, 125 volt. NEMA 5-15R. UL, cULus Listed. Receptacle is tamper resistant with a UL Listed shutter system and impact-resistant thermoplastic face and back body that is virtually unbreakable. The 2008 National Electrical Code (NEC) states that "Effective January 1, 2008, all receptacles installed in new dwelling units must be tamper-resistant." Features a wire stripper for number 14 and number 12 wire, extra long and wide mounting straps and tri-combo screws that accept slotted, Phillips and Robertson-head tools. Terminal screws are backed out and ready to wire. Side-wire terminals accept up to number 10 solid or stranded wire. Push in terminals accept number 14 solid wire. Screw-catch feature speeds wall plate installation. 15 amp, 125 volt. NEMA 5-15R. UL, cULus Listed. Retractable 3.5mm male to 3.5mm male auxiliary audio cable.
Halex 90402 Offset Nipple Halex 07012 Conduit Chase Nipple Cooper TR1107V Decorator Tamper Resistant Duplex Receptacle
Zinc die cast. Use as an offset connector between two enclosures. Offsets the axis of the raceway 3/4". UL Approved. Zinc die cast. Indoor or outdoor applications. Use to terminate threaded conduit to a knockout box or enclosure, where space within the box is limited. Used with a locknut to provide a short raceway between boxes or enclosures. UL and CSA approved. Receptacle is tamper resistant with a UL Listed shutter system and impact-resistant thermoplastic face and back body that is virtually unbreakable. The 2008 National Electrical Code (NEC) states that "Effective January 1, 2008, all receptacles installed in new dwelling units must be tamper-resistant." Features a wire stripper for number 14 and number 12 wire, extra long and wide mounting straps and tri-combo screws that accept slotted, Phillips and Robertson-head tools. Terminal screws are backed out and ready to wire. Side-wire terminals accept up to number 10 solid or stranded wire. Push in terminals accept number 14 solid wire. Screw-catch feature speeds wall plate installation. 15 amp, 125 volt. NEMA 5-15R. UL, cULus Listed.
Cooper TR1107W Decorator Tamper Resistant Duplex Receptacle AmerTac 935DW Wall Plate Halex 64012 Conduit Coupling
Receptacle is tamper resistant with a UL Listed shutter system and impact-resistant thermoplastic face and back body that is virtually unbreakable. The 2008 National Electrical Code (NEC) states that "Effective January 1, 2008, all receptacles installed in new dwelling units must be tamper-resistant." Features a wire stripper for number 14 and number 12 wire, extra long and wide mounting straps and tri-combo screws that accept slotted, Phillips and Robertson-head tools. Terminal screws are backed out and ready to wire. Side-wire terminals accept up to number 10 solid or stranded wire. Push in terminals accept number 14 solid wire. Screw-catch feature speeds wall plate installation. 15 amp, 125 volt. NEMA 5-15R. UL, cULus Listed. With screws. 5" height x 2-3/4" width x 1/4" depth. Steel, indoor or out. Use to join threaded Rigid or IMC conduit together. UL Listed.
Halex 02112 Compression Connector Arrow Hart PJS1 Mid Size Screw less Wall Plate Arrow Hart PJS1 Mid Size Screw less Wall Plate
Zinc die cast. Use to connect EMT conduit to steel outlet box, load center or other metal enclosure. UL Approved. Screwless mid-size switch plate wall plates are virtually unbreakable and present a clean, minimalist look that can be changed in seconds. Easy installation, simply screw the mounting plate onto the wiring device and press into place. Screwless mid-size switch plate wall plates are virtually unbreakable and present a clean, minimalist look that can be changed in seconds. Easy installation, simply screw the mounting plate onto the wiring device and press into place.
Arrow Hart BR20V  Duplex Receptacle Arrow Hart BR20W  Duplex Receptacle Arrow Hart BR20A  Duplex Receptacle
High impact-resistant thermoplastic face. Triple wipe line contacts for long-term plug retention. Double wipe ground contacts for ground retention. .050" thick steel wrap-around mounting strap zinc-plated for corrosion resistance. Easy access split circuit break-off tab. Automatic grounding system eliminates need for bonding jumper in grounded metal enclosure. Back and side wire terminals accept #14, #12 and #10 solid or stranded wire. Terminal screws backed out. Combination slot/Phillips head mounting and terminal screws. Meets all UL 498 requirements. Federal specifications WC-596. Bulk Pak. UL Listed. High impact-resistant thermoplastic face. Triple wipe line contacts for long-term plug retention. Double wipe ground contacts for ground retention. .050" thick steel wrap-around mounting strap zinc-plated for corrosion resistance. Easy access split circuit break-off tab. Automatic grounding system eliminates need for bonding jumper in grounded metal enclosure. Back and side wire terminals accept #14, #12 and #10 solid or stranded wire. Terminal screws backed out. Combination slot/Phillips head mounting and terminal screws. Meets all UL 498 requirements. Federal specifications WC-596. Bulk Pak. UL Listed. High impact-resistant thermoplastic face. Triple wipe line contacts for long-term plug retention. Double wipe ground contacts for ground retention. .050" thick steel wrap-around mounting strap zinc-plated for corrosion resistance. Easy access split circuit break-off tab. Automatic grounding system eliminates need for bonding jumper in grounded metal enclosure. Back and side wire terminals accept #14, #12 and #10 solid or stranded wire. Terminal screws backed out. Combination slot/Phillips head mounting and terminal screws. Meets all UL 498 requirements. Federal specifications WC-596. Bulk Pak. UL Listed.
Halex 90292 Concrete Tight Compression Short Radius Conduit Elbow Halex 90291 Concrete Tight Compression Short Radius Conduit Elbow RECEPTACLE SGL LT ALMOND 125V
Zinc die cast. Concrete-tight. Indoor or outdoor applications. Use to connect EMT conduit to a metal outlet box or enclosure where a 90 degree bend is required and a pipe bending tool is not used. UL, CSA Listed. Zinc die cast. Concrete-tight. Indoor or outdoor applications. Use to connect EMT conduit to a metal outlet box or enclosure where a 90 degree bend is required and a pipe bending tool is not used. UL, CSA Listed. Meets all UL 498 requirements. Triple wire line contacts provide excellent long-term plug retention. Arc-resistant thermostat face. Side wire terminals accept up to #10 solid or stranded wire. Terminal screws backed out. Tamper resistant receptacles have a UL Listed shutter system. 20 amp, 125 volt.
Arrow Hart 1877  Single Receptacle Arrow Hart 1877  Single Receptacle Arrow Hart 1877W  Single Receptacle
Meets all UL 498 requirements. Triple wire line contacts provide excellent long-term plug retention. Arc-resistant thermostat face. Side wire terminals accept up to #10 solid or stranded wire. Terminal screws backed out. Tamper resistant receptacles have a UL Listed shutter system. 20 amp, 125 volt. Meets all UL 498 requirements. Triple wire line contacts provide excellent long-term plug retention. Arc-resistant thermostat face. Side wire terminals accept up to #10 solid or stranded wire. Terminal screws backed out. Tamper resistant receptacles have a UL Listed shutter system. 20 amp, 125 volt. Meets all UL 498 requirements. Triple wire line contacts provide excellent long-term plug retention. Arc-resistant thermostat face. Side wire terminals accept up to #10 solid or stranded wire. Terminal screws backed out. Tamper resistant receptacles have a UL Listed shutter system. 20 amp, 125 volt.
Halex 94105 Pull Conduit Elbow with Neoprene Gasket Halex 02212 Concrete Tight Compression Coupling Amerelle Century 1-Rocker 1-Toggle Wall Plate
Zinc die cast. Indoors or outdoors. Use as a wire pulling elbow to facilitate wire pulling through a sharp bend in a run of threaded Rigid or IMC conduit. Removable cover provides easy access to wiring. UL Approved. Bulk packed. Use to join two lengths of EMT conduit together. Zinc. UL, CSA Approved. Amerelle Wall Plate, 1-Rocker, 1-Toggle, Series: Century, 4-15/16 in Length, 4-9/16 in Width, 2 Gangs, Stamped Steel, Brushed Nickel, Screw Mounting, Includes: Matching Screws, UL Listed
Halex 58305 Rigid Threaded Conduit Body with Cover and Gasket Halex 58405 Rigid Threaded Conduit Body with Cover and Gasket Halex 58605 Rigid Threaded Conduit Body with Cover and Gasket
Aluminum, indoors or outdoors. Use to gain access to the interior of a raceway for wire pulling, splicing (with limitations as specified by the NEC), and maintenance. With cover and gasket. UL Approved. Tray boxed. Copper-free die cast aluminum. Indoors or outdoors. Use to gain access to the interior of a raceway for wire pulling, splicing (with limitations as specified by the NEC), and maintenance. With cover and gasket. UL Approved. Tray boxed. Aluminum, indoor or outdoor. Use to gain access to the interior of a raceway for wire pulling, splicing (with limitations as specified by the NEC), and maintenance. With cover and gasket. UL Approved.
Arrow Hart 39CH-BOX Wall Plate Halex 58905 Rigid Threaded Conduit Body with Cover and Gasket Arrow Hart Eagle 69-BOX Standard Wall Plate
Full gauge and size beveled-edge; furnished with mounting screws. Fit 1253, 1254 and 1263 flush receptacles. Standard size - 2.75" x 4.50", boxed. Aluminum, indoor or outdoor. Use to gain access to the interior of a raceway for wire pulling, splicing (with limitations as specified by the NEC), and maintenance. With cover and gasket. UL Approved. Tray boxed. Fits 1257 and 1258 flush receptacles.
RECEPTACLE COMM LT ALMOND 20A Cooper 5270  Standard Duplex Receptacle Cooper 5270  Standard Duplex Receptacle
High impact-resistant thermoplastic face. Triple wipe line contacts for long-term plug retention. Double wipe ground contacts for ground retention. .050" thick steel wrap-around mounting strap zinc-plated for corrosion resistance. Easy access split circuit break-off tab. Automatic grounding system eliminates need for bonding jumper in grounded metal enclosure. Back and side wire terminals accept #14, #12 and #10 solid or stranded wire. Terminal screws backed out. Combination slot/Phillips head mounting and terminal screws. Meets all UL 498 requirements. Federal specifications WC-596. Bulk Pak. UL Listed. Meets all UL 498 and 1567 requirements. Longer, wider strap provides 40 percent more contact area. Side wire terminals accept up to #10 solid or standard copper or aluminum wire. Terminal screws backed out. Combination slot/Phillips head mounting and terminal screws ease installation with power screwdrivers. 15 amp, 125 volt. Bulk pack. Meets all UL 498 and 1567 requirements. Longer, wider strap provides 40 percent more contact area. Side wire terminals accept up to #10 solid or standard copper or aluminum wire. Terminal screws backed out. Combination slot/Phillips head mounting and terminal screws ease installation with power screwdrivers. 15 amp, 125 volt. Bulk pack.
Arrow Hart Eagle 68-BOX Standard Wall Plate Halex 07015 Conduit Chase Nipple CABLE MICRO USB CHARGER 3FT
Standard size two gang metal wallplate for power devices using a 2.1563" single opening. Zinc die cast. Indoor or outdoor applications. Use to terminate threaded conduit to a knockout box or enclosure, where space within the box is limited. Used with a locknut to provide a short raceway between boxes or enclosures. UL and CSA approved. USB charge and sync data cord.
Jandorf 61014 Single Electrical Receptacle Jandorf 61015 Single Electrical Receptacle Halex 59505 Service Entrance Elbow
Jandorf Electrical Receptacle, Single, 2 Poles, 2 Wires, 15 A, 125 V, Black, CSA Certified, For Indoor Use Jandorf Electrical Receptacle, Single, 2 Poles, 2 Wires, 15 A, 125 V, White, CSA Certified, For Indoor Use Copper-free die cast aluminum. Use to gain access to the interior of a raceway for wire pulling, inspection and maintenance. UL Approved. Tray boxed.
Arrow Hart 817  Single Receptacle Cooper 827 Duplex Receptacle Cooper 827 Duplex Receptacle
Meets all UL 498 requirements. Triple wire line contacts provide excellent long-term plug retention. Arc-resistant thermostat face. Side wire terminals accept up to #10 solid or stranded wire. Terminal screws backed out. Tamper resistant receptacles have a UL Listed shutter system. cULus Listed. 15 amp, 125 volt. Meets all UL 498 requirements. Triple wipe line contacts for long-term plug retention. Double wipe ground contacts for ground retention. 0.50" thick steel wrap-around mounting strap galvanized for corrosion resistance. Easy access split circuit break-off tab (except dual voltage). Side wire terminals accept up to #10 solid or stranded wire. Terminal screws backed out; ready for wiring. Combination slot/Phillips head mounting and terminal screws. Meets all UL 498 requirements. Triple wipe line contacts for long-term plug retention. Double wipe ground contacts for ground retention. 0.50" thick steel wrap-around mounting strap galvanized for corrosion resistance. Easy access split circuit break-off tab (except dual voltage). Side wire terminals accept up to #10 solid or stranded wire. Terminal screws backed out; ready for wiring. Combination slot/Phillips head mounting and terminal screws.
Arrow Hart 817W  Single Receptacle Cooper 827 Duplex Receptacle Cooper TWR270W Tamper Resistant Weatherproof Duplex Receptacle
Meets all UL 498 requirements. Triple wire line contacts provide excellent long-term plug retention. Arc-resistant thermostat face. Side wire terminals accept up to #10 solid or stranded wire. Terminal screws backed out. Tamper resistant receptacles have a UL Listed shutter system. cULus Listed. 15 amp, 125 volt. Meets all UL 498 requirements. Triple wipe line contacts for long-term plug retention. Double wipe ground contacts for ground retention. 0.50" thick steel wrap-around mounting strap galvanized for corrosion resistance. Easy access split circuit break-off tab (except dual voltage). Side wire terminals accept up to #10 solid or stranded wire. Terminal screws backed out; ready for wiring. Combination slot/Phillips head mounting and terminal screws. Receptacle is residential grade, duplex, tamper resistant with a UL Listed shutter system and impact-resistant thermoplastic face and back body that is virtually unbreakable. The 2008 National Electrical Code (NEC) states that "Effective January 1, 2008, all receptacles installed in new dwelling units must be tamper-resistant." Features a wire stripper for #14 and #12 wire, extra long and wide mounting straps and tri-combo screws that accept slotted, Phillips and Robertson-head tools. Terminal screws are backed out and ready to wire. Side-wire terminals accept up to #10 solid or stranded wire. Push in terminals accept #14 solid wire. Screw-catch feature speeds wall plate installation. TR and WR designations provide visual identification. UL, cULus listed. 15 amp, 125 volt.
Cooper TWR270V Tamper Resistant Weatherproof Duplex Receptacle Arrow Hart 816  Single Receptacle Arrow Hart 816  Single Receptacle
Receptacle is residential grade, duplex, tamper resistant with a UL Listed shutter system and impact-resistant thermoplastic face and back body that is virtually unbreakable. The 2008 National Electrical Code (NEC) states that "Effective January 1, 2008, all receptacles installed in new dwelling units must be tamper-resistant." Features a wire stripper for #14 and #12 wire, extra long and wide mounting straps and tri-combo screws that accept slotted, Phillips and Robertson-head tools. Terminal screws are backed out and ready to wire. Side-wire terminals accept up to #10 solid or stranded wire. Push in terminals accept #14 solid wire. Screw-catch feature speeds wall plate installation. TR and WR designations provide visual identification. UL, cULus listed. 15 amp, 125 volt. Meets all UL 498 requirements. Triple wire line contacts provide excellent long-term plug retention. Arc-resistant thermostat face. Side wire terminals accept up to #10 solid or stranded wire. Terminal screws backed out. 15 amp, 250 volt. Meets all UL 498 requirements. Triple wire line contacts provide excellent long-term plug retention. Arc-resistant thermostat face. Side wire terminals accept up to #10 solid or stranded wire. Terminal screws backed out. 15 amp, 250 volt.
Halex 04010 Offset Nipple AmerTac 161D Square Corner Wall Plate AmerTac 163DBR Square Corner Wall Plate
Zinc die cast. Use as an offset connector between two enclosures. Offsets the axis of the raceway 3/4". UL Approved. Traditional square corner design. With screws. 5" height x 2-7/8" width x 1/4" depth. Traditional square corner design. With screws. 5" height x 2-7/8" width x 1/4" depth.
Halex 02115 Compression Connector Halex 20210 Concrete Tight Compression Connector Halex 64015 Conduit Coupling
Zinc die cast. Use to connect EMT conduit to steel outlet box, load center or other metal enclosure. UL Approved. Zinc die cast. Use to connect EMT conduit to steel outlet box, load center or other metal enclosure. UL Approved. Steel, indoor or out. Use to join threaded Rigid or IMC conduit together. UL Listed.
Halex 58805 Rigid Threaded Conduit Body with Cover and Gasket Halex 94107 Pull Conduit Elbow Halex 21642 Box Spacer
Copper-free die cast aluminum. Indoors or outdoors. Use to gain access to the interior of a raceway for wire pulling, splicing (with limitations as specified by the NEC), and maintenance. UL Approved. Tray boxed. Zinc die cast. Indoors or outdoors. Use as a wire pulling elbow to facilitate wire pulling through a sharp bend in a run of threaded Rigid or IMC conduit. Removable cover provides easy access to wiring. UL Approved. Bulk packed. Die cast of high strength corrosion resistant zinc alloy. Locknut is reversible. It is designed to cut through protective coatings on boxes and enclosures to assure ground continuity. Use as a raceway between two steel outlet boxes or other metal enclosures. UL and CSA Listed.
Cooper 877 Grounded Duplex Receptacle Cooper 877 Grounded Duplex Receptacle Cooper 877 Grounded Duplex Receptacle
Meets all UL 498 requirements. Triple wipe line contacts for long-term plug retention. Double wipe ground contacts for ground retention. 0.50" thick steel wrap-around mounting strap galvanized for corrosion resistance. Easy access split circuit break-off tab (except dual voltage). Side wire terminals accept up to #10 solid or stranded wire. Terminal screws backed out; ready for wiring. Combination slot/Phillips head mounting and terminal screws. Meets all UL 498 requirements. Triple wipe line contacts for long-term plug retention. Double wipe ground contacts for ground retention. 0.50" thick steel wrap-around mounting strap galvanized for corrosion resistance. Easy access split circuit break-off tab (except dual voltage). Side wire terminals accept up to #10 solid or stranded wire. Terminal screws backed out; ready for wiring. Combination slot/Phillips head mounting and terminal screws. Meets all UL 498 requirements. Triple wipe line contacts for long-term plug retention. Double wipe ground contacts for ground retention. 0.50" thick steel wrap-around mounting strap galvanized for corrosion resistance. Easy access split circuit break-off tab (except dual voltage). Side wire terminals accept up to #10 solid or stranded wire. Terminal screws backed out; ready for wiring. Combination slot/Phillips head mounting and terminal screws.
Halex 64105 Conduit Elbow Cooper A12 869-BOX  Duplex Receptacle Arrow Hart PJ1EMRD Mid Size Wall Plate
Use to allow a 90 degree change of direction in a run of Rigid or IMC conduit. UL Listed. Commercial specification grade straight blade receptacle on 4" galvanized steel cover. Back and side wire. 15 amp 125 volt. 5-15R NEMA. Temperature rating of -20 to 60 degrees C. UL Listed, meets all CSA requirements, NOM Certified. Molded from non-flammable Polycarbonate, pre-marked "EMERGENCY" with indelible printing guaranteed not to fade, bleed or rub off. High letters for easy identification. Virtually unbreakable, with high structural rigidity, long-term form retention and superior impact and abrasion resistance. Screw-catch feature holds mounting screws captive and simplifies installation. Matching screws provided. High gloss finish is soil resistant. Mid-size - 3.125" x 4.875".
Aspire 9505 Duplex Recessed Tamper Resistant Electrical Receptacle Aspire 9505 Duplex Recessed Tamper Resistant Electrical Receptacle RECEPT DUPLEX RB 15A 125V 2P3W
Receptacle is residential grade, duplex, tamper resistant with a UL Listed shutter system and impact-resistant thermoplastic face and back body that is virtually unbreakable. An oversized strap provides a solid base for mounting and virtually eliminates "floating" installations. Thermoplastic construction ultrasonically welded top and backbody; extra-long, extra-wide mounting straps; number 12 and number 14 push-in terminals; backwire clamps on side terminals; easy-access ground screws; built-in wire strippers. Meets all UL 498 requirements, (file no. E15058); CSA Certified, C22.2 no. 42 (file no. 6914 (6233-01); NOM Certified. Flammability rating: V2 per UL 94. temperature rating: -40 degrees C to 65 degrees C. TR designations provides visual identification. UL, cULus Listed. 15 amp, 125 volt. Receptacle is residential grade, duplex, tamper resistant with a UL Listed shutter system and impact-resistant thermoplastic face and back body that is virtually unbreakable. An oversized strap provides a solid base for mounting and virtually eliminates "floating" installations. Thermoplastic construction ultrasonically welded top and backbody; extra-long, extra-wide mounting straps; number 12 and number 14 push-in terminals; backwire clamps on side terminals; easy-access ground screws; built-in wire strippers. Meets all UL 498 requirements, (file no. E15058); CSA Certified, C22.2 no. 42 (file no. 6914 (6233-01); NOM Certified. Flammability rating: V2 per UL 94. temperature rating: -40 degrees C to 65 degrees C. TR designations provides visual identification. UL, cULus Listed. 15 amp, 125 volt. Receptacle is tamper resistant with a UL Listed shutter system and impact-resistant thermoplastic face and back body that is virtually unbreakable. The 2008 National Electrical Code (NEC) states that "Effective January 1, 2008, all receptacles installed in new dwelling units must be tamper-resistant." Features a wire stripper for number 14 and number 12 wire, extra long and wide mounting straps and tri-combo screws that accept slotted, Phillips and Robertson-head tools. Terminal screws are backed out and ready to wire. Side-wire terminals accept up to number 10 solid or stranded wire. Push in terminals accept number 14 solid wire. Screw-catch feature speeds wall plate installation. 15 amp, 125 volt. NEMA 5-15R. UL, cULus Listed.
Arrow Hart Eagle 2168 Standard Wall Plate Cooper C1507V Grounded Standard Duplex Receptacle Cooper C1507W Grounded Standard Duplex Receptacle
Screw-catch feature holds mounting screws captive and simplifies installation. Matching mounting screws provided. With No. 1107 wall plate. UL Listed. 15 amp, 125 volt, grounded. Carded. With No. 1107 wall plate. UL Listed. 15 amp, 125 volt, grounded. Carded.
Halex 64320 Conduit Nipple Jandorf 61016 Single Electrical Receptacle Jandorf 61017 Single Electrical Receptacle
Made of steel, fully threaded. Indoor or outdoor. Use to connect two steel outlet boxes or other metal enclosures or to extend a length of threaded Rigid or IMC conduit. Bulk packed. Jandorf Electrical Receptacle, Single, 3 Poles, 3 Wires, 15 A, 125 V, Black, CSA Certified, For Indoor Use Jandorf Electrical Receptacle, Single, 3 Poles, 3 Wires, 15 A, 125 V, White, CSA Certified, For Indoor Use
Arrow Hart TR Duplex Receptacle Arrow Hart TR Duplex Receptacle RECEPTACLE SGL LT ALMOND 250V
High impact-resistant thermoplastic face. Triple wipe line contacts for long-term plug retention. Double wipe ground contacts for ground retention. .050" thick steel wrap-around mounting strap zinc-plated for corrosion resistance. Easy access split circuit break-off tab. Automatic grounding system eliminates need for bonding jumper in grounded metal enclosure. Back and side wire terminals accept #14, #12 and #10 solid or stranded wire. Terminal screws backed out. Combination slot/Phillips head mounting and terminal screws. Meets all UL 498 requirements. Federal Specifications WC-596. UL Listed. Tamper resistant receptacles have a UL Listed shutter system. High impact-resistant thermoplastic face. Triple wipe line contacts for long-term plug retention. Double wipe ground contacts for ground retention. .050" thick steel wrap-around mounting strap zinc-plated for corrosion resistance. Easy access split circuit break-off tab. Automatic grounding system eliminates need for bonding jumper in grounded metal enclosure. Back and side wire terminals accept #14, #12 and #10 solid or stranded wire. Terminal screws backed out. Combination slot/Phillips head mounting and terminal screws. Meets all UL 498 requirements. Federal Specifications WC-596. UL Listed. Tamper resistant receptacles have a UL Listed shutter system. Straight blade receptacle. Meets all UL and CSA specifications. Triple wire line contacts provide excellent long-term plug retention. High impact and chemical-resistant nylon face. Side wire terminals accept up to #10 solid or stranded wire. Terminal screws backed out. 20 amp, 250 volt.
Amerelle Traditional Duplex Wall Plate Arrow Hart 1876  Single Receptacle Arrow Hart 1876  Single Receptacle
Amerelle Wall Plate, Duplex, Series: Traditional, 1 Gangs, 2 Outlets, Stamped Steel, Brushed Nickel, Wall Mounting, Includes: Matching Screws, UL Listed Straight blade receptacle. Meets all UL and CSA specifications. Triple wire line contacts provide excellent long-term plug retention. High impact and chemical-resistant nylon face. Side wire terminals accept up to #10 solid or stranded wire. Terminal screws backed out. 20 amp, 250 volt. Straight blade receptacle. Meets all UL and CSA specifications. Triple wire line contacts provide excellent long-term plug retention. High impact and chemical-resistant nylon face. Side wire terminals accept up to #10 solid or stranded wire. Terminal screws backed out. 20 amp, 250 volt.
Arrow Hart 1876W Grounded  Single Receptacle Arrow Hart PJS2 Mid Size Screw less Wall Plate Arrow Hart PJS2 Mid Size Screw less Wall Plate
Straight blade receptacle. Meets all UL and CSA specifications. Triple wire line contacts provide excellent long-term plug retention. High impact and chemical-resistant nylon face. Side wire terminals accept up to #10 solid or stranded wire. Terminal screws backed out. 20 amp, 250 volt. Screwless mid-size toggle wall plate, virtually unbreakable, clips easily into place with gentle pressure. Features clean appearance with no visible mounting hardware. Works with standard toggle switches. Molded from non-flammable Polycarbonate, with high structural rigidity, long-term form retention and superior impact and abrasion resistance. Screwless mid-size toggle wall plate, virtually unbreakable, clips easily into place with gentle pressure. Features clean appearance with no visible mounting hardware. Works with standard toggle switches. Molded from non-flammable Polycarbonate, with high structural rigidity, long-term form retention and superior impact and abrasion resistance.
AmerTac Zenith VG100606B RG6 Coaxial Cable AmerTac Zenith VG100606W RG6 Coaxial Cable Cooper 270V10 Grounded  Duplex Receptacle
Connects video components. Flexible PVC jacket. Connects video components. Flexible PVC jacket. Built-in wire stripper for number 14 wire. Built-in wire looper for pre-looping conductors. Screw-catch feature eliminates need to hand-thread screw and possible cross-threading. Double wipe ground contacts. Split circuit break-off tab. Side wire terminals accept up to number 10 solid or stranded wire. Push-in terminals accept number 14 solid wire only. 15 amp/125 volt. UL Listed, NOM certified, meets CSA requirements.
Cooper 270W Grounded  Duplex Receptacle Halex 02120 Compression Connector Halex 02215 Concrete Tight Compression Coupling
Built-in wire stripper for number 14 wire. Built-in wire looper for pre-looping conductors. Screw-catch feature eliminates need to hand-thread screw and possible cross-threading. Double wipe ground contacts. Split circuit break-off tab. Side wire terminals accept up to number 10 solid or stranded wire. Push-in terminals accept number 14 solid wire only. 15 amp/125 volt. UL Listed, NOM certified, meets CSA requirements. Zinc die cast. Use to connect EMT conduit to steel outlet box, load center or other metal enclosure. UL Approved. Use to join two lengths of EMT conduit together. Zinc. UL, CSA Approved.
Halex 58907 Rigid Threaded Conduit Body with Cover and Gasket Halex 04012 Offset Nipple Cooper TR817W-BOX Tamper Resistant Single Receptacle
Aluminum, indoor or outdoor. Use to gain access to the interior of a raceway for wire pulling, splicing (with limitations as specified by the NEC), and maintenance. With cover and gasket. UL Approved. Tray boxed. Zinc die cast. Use as an offset connector between two enclosures. Offsets the axis of the raceway 3/4". UL Approved. Meets all UL 498 requirements. Triple wire line contacts provide excellent long-term plug retention. Arc-resistant thermostat face. Side wire terminals accept up to #10 solid or stranded wire. Terminal screws backed out. Tamper resistant receptacles have a UL Listed shutter system. cULus Listed. 15 amp, 125 volt.
Cooper TR817V-BOX Tamper Resistant Single Receptacle Halex 58607 Rigid Threaded Conduit Body with Cover and Gasket Cooper TR1877W-BXSP Tamper Resistant Single Receptacle
Meets all UL 498 requirements. Triple wire line contacts provide excellent long-term plug retention. Arc-resistant thermostat face. Side wire terminals accept up to #10 solid or stranded wire. Terminal screws backed out. Tamper resistant receptacles have a UL Listed shutter system. cULus Listed. 15 amp, 125 volt. Aluminum, indoor or outdoor. Use to gain access to the interior of a raceway for wire pulling, splicing (with limitations as specified by the NEC), and maintenance. With cover and gasket. UL Approved. Meets all UL 498 requirements. Triple wire line contacts provide excellent long-term plug retention. Arc-resistant thermostat face. Side wire terminals accept up to #10 solid or stranded wire. Terminal screws backed out. Tamper resistant receptacles have a UL Listed shutter system. 20 amp, 125 volt.
Cooper TR1877V-BXSP Tamper Resistant Single Receptacle Halex 58307 Rigid Threaded Conduit Body with Cover and Gasket Halex 58407 Rigid Threaded Conduit Body with Cover and Gasket
Meets all UL 498 requirements. Triple wire line contacts provide excellent long-term plug retention. Arc-resistant thermostat face. Side wire terminals accept up to #10 solid or stranded wire. Terminal screws backed out. Tamper resistant receptacles have a UL Listed shutter system. 20 amp, 125 volt. Aluminum, indoors or outdoors. Use to gain access to the interior of a raceway for wire pulling, splicing (with limitations as specified by the NEC), and maintenance. With cover and gasket. UL Approved. Tray boxed. Copper-free die cast aluminum. Indoors or outdoors. Use to gain access to the interior of a raceway for wire pulling, splicing (with limitations as specified by the NEC), and maintenance. With cover and gasket. UL Approved. Tray boxed.
Arrow Hart TRBR20W-BXSP Tamper Resistant Duplex Receptacle Arrow Hart TRBR20V-BXSP Tamper Resistant Duplex Receptacle Arrow Hart Arrow Link 5252  Duplex Receptacle
High impact-resistant thermoplastic face. Triple wipe line contacts for long-term plug retention. Double wipe ground contacts for ground retention. .050" thick steel wrap-around mounting strap zinc-plated for corrosion resistance. Easy access split circuit break-off tab. Automatic grounding system eliminates need for bonding jumper in grounded metal enclosure. Back and side wire terminals accept #14, #12 and #10 solid or stranded wire. Terminal screws backed out. Combination slot/Phillips head mounting and terminal screws. Meets all UL 498 requirements. Federal Specifications WC-596. UL Listed. Tamper resistant receptacles have a UL Listed shutter system. High impact-resistant thermoplastic face. Triple wipe line contacts for long-term plug retention. Double wipe ground contacts for ground retention. .050" thick steel wrap-around mounting strap zinc-plated for corrosion resistance. Easy access split circuit break-off tab. Automatic grounding system eliminates need for bonding jumper in grounded metal enclosure. Back and side wire terminals accept #14, #12 and #10 solid or stranded wire. Terminal screws backed out. Combination slot/Phillips head mounting and terminal screws. Meets all UL 498 requirements. Federal Specifications WC-596. UL Listed. Tamper resistant receptacles have a UL Listed shutter system. High impact and chemical-resistant nylon face. Rigid glass reinforced nylon base. Automatic grounding system eliminates need for bonding jumper in grounded metal enclosure. Long, broad mounting strap. Meets all UL 498 requirements UL Listed. Screw-catch feature speeds mounting of wall plates. Combination slot/Phillips/Robertson terminal and mounting screws. 5-leaf solid brass line contacts for lowest heat rise, smooth plug blade insertion and long term retention.
Halex 07020 Conduit Chase Nipple Halex 64107 Conduit Elbow Halex 20221 Concrete Tight Compression Coupling
Zinc die cast. Indoor or outdoor applications. Use to terminate threaded conduit to a knockout box or enclosure, where space within the box is limited. Used with a locknut to provide a short raceway between boxes or enclosures. UL and CSA approved. Use to allow a 90 degree change of direction in a run of Rigid or IMC conduit. UL Listed. Use to join two lengths of EMT conduit together. Zinc. UL, CSA Approved.
Halex 59507 Service Entrance Elbow CABLE MICRO USB GET POWER 12FT Halex 58807 Rigid Threaded Conduit Body with Cover and Gasket
Copper-free die cast aluminum. Use to gain access to the interior of a raceway for wire pulling, inspection and maintenance. UL Approved. Tray boxed. USB charge and sync data cord. Copper-free die cast aluminum. Indoors or outdoors. Use to gain access to the interior of a raceway for wire pulling, splicing (with limitations as specified by the NEC), and maintenance. UL Approved. Tray boxed.
Halex 20212 Concrete Tight Compression Connector Cooper TWRBR15V Tamper Resistant Weatherproof Duplex Receptacle Cooper TWRBR15W-BXSP Tamper Resistant Weatherproof Duplex Receptacle
Zinc die cast. Use to connect EMT conduit to steel outlet box, load center or other metal enclosure. UL Approved. Tamper and weather resistant commercial grade duplex receptacle with a UL Listed shutter system, back and side wiring. -4 to 158 degrees F temperature rating. Withstands 2000 volts per UL498. Body is thermoplastic nylon, the strap and terminal clamps are nickel plated steel. The contacts are a brass alloy. UL Listed to UL498, UL Certified to CSA C22.2, no. 42, UL verified to Fed. Spec. WC-596G, and NOM/ANSI Certified. Meets UL 94 flammability requirements; V2 rated. TR and WR designations provide visual identification. UL, cULus Listed. Tamper and weather resistant commercial grade duplex receptacle with a UL Listed shutter system, back and side wiring. -4 to 158 degrees F temperature rating. Withstands 2000 volts per UL498. Body is thermoplastic nylon, the strap and terminal clamps are nickel plated steel. The contacts are a brass alloy. UL Listed to UL498, UL Certified to CSA C22.2, no. 42, UL verified to Fed. Spec. WC-596G, and NOM/ANSI Certified. Meets UL 94 flammability requirements; V2 rated. TR and WR designations provide visual identification. UL, cULus Listed.
CABLE USB BRAIDED MICRO       Halex 02220 Concrete Tight Compression Coupling Arrow Hart PJS3 Mid Size Screw less Wall Plate
USB charge and sync data cord. Use to join two lengths of EMT conduit together. Zinc. UL, CSA Approved. Screwless mid-size toggle wall plate, virtually unbreakable, clips easily into place with gentle pressure. Features clean appearance with no visible mounting hardware. Works with standard toggle switches. Molded from non-flammable Polycarbonate, with high structural rigidity, long-term form retention and superior impact and abrasion resistance.
AmerTac 935TDW Wall Plate CORD CHARGE MICRO VEHICLE USB Amerelle Metro Line Duplex Wall Plate
With screws. 5" height x 4-5/8" width x 1/4" depth. USB car adapter. 12 volts, USB ports. Works with most portable devices. Amerelle Wall Plate, Duplex, Series: Metro Line, 1 Gangs, 2 Outlets, Cast Metal, Brushed Nickel, Wall Mounting, Includes: Matching Screws, UL Listed
Cooper 542B-BOX Duplex Receptacle ADAPTER DC DUAL USB 2.1AMP    Halex 64020 Conduit Coupling
NEMA 5-15R. For pole barns. 15 amp, 125 volt. USB car adapter. 12 volts, USB ports. Works with most portable devices. Steel, indoor or out. Use to join threaded Rigid or IMC conduit together. UL Listed.
AmerTac Zenith VG101206B RG6 Coaxial Cable AmerTac Zenith VG101206W RG6 Coaxial Cable AmerTac Chelsea Duplex Wall Plate
Connects video components. Flexible PVC jacket. Connects video components. Flexible PVC jacket. AmerTac Wall Plate, Duplex, Series: Chelsea, 1 Gangs, 2 Outlets, Stamped Steel, Brushed Nickel, Wall Mounting, Includes: Matching Screws, UL Listed
Amerelle Duplex Wall Plate Cooper TWRBR20V Tamper Resistant Weatherproof Duplex Receptacle Cooper TWRBR20W-BXSP Tamper Resistant Weatherproof Duplex Receptacle
Amerelle Wall Plate, Duplex, Series: Contemporary, 1 Gangs, 2 Outlets, Wood, Unfinished Ash, Screw Mounting, Includes: Matching Screws, UL Listed Tamper and weather resistant commercial grade duplex receptacle with a UL Listed shutter system, back and side wiring. -4 to 158 degrees F temperature rating. Withstands 2000 volts per UL498. Body is thermoplastic nylon, the strap and terminal clamps are nickel plated steel. The contacts are a brass alloy. UL Listed to UL498, UL Certified to CSA C22.2, no. 42, UL verified to Fed. Spec. WC-596G, and NOM/ANSI Certified. Meets UL 94 flammability requirements; V2 rated. TR and WR designations provide visual identification. UL, cULus Listed. Tamper and weather resistant commercial grade duplex receptacle with a UL Listed shutter system, back and side wiring. -4 to 158 degrees F temperature rating. Withstands 2000 volts per UL498. Body is thermoplastic nylon, the strap and terminal clamps are nickel plated steel. The contacts are a brass alloy. UL Listed to UL498, UL Certified to CSA C22.2, no. 42, UL verified to Fed. Spec. WC-596G, and NOM/ANSI Certified. Meets UL 94 flammability requirements; V2 rated. TR and WR designations provide visual identification. UL, cULus Listed.
Halex 20222 Concrete Tight Compression Coupling AmerTac Zenith VG102506B RG6 Coaxial Cable AmerTac Zenith VG102506W RG6 Coaxial Cable
Use to join two lengths of EMT conduit together. Zinc. UL, CSA Approved. Connects video components. Flexible PVC jacket. Connects video components. Flexible PVC jacket.
Arrow Hart PJS3 Mid Size Screw less Wall Plate Halex 04015 Offset Nipple Halex 58610 Rigid Threaded Conduit Body with Cover and Gasket
Screwless mid-size toggle wall plate, virtually unbreakable, clips easily into place with gentle pressure. Features clean appearance with no visible mounting hardware. Works with standard toggle switches. Molded from non-flammable Polycarbonate, with high structural rigidity, long-term form retention and superior impact and abrasion resistance. Zinc die cast. Use as an offset connector between two enclosures. Offsets the axis of the raceway 3/4". UL Approved. Aluminum, indoor or outdoor. Use to gain access to the interior of a raceway for wire pulling, splicing (with limitations as specified by the NEC), and maintenance. With cover and gasket. UL Approved.
AmerTac Zenith VQ300306B RG6 Coaxial Cable Amerelle 901DL Duplex Wall Plate Halex 59510 Service Entrance Elbow
Designed to optimize performance from digital sources such as HDTV. 75 ohm, corrosion resistant brass "F" compression connectors. 24 K gold electroplated connectors. Aluminum braided shield prevents signal loss, aluminum foil shield minimizes interference. Heavy duty outer jacket for long life protection. RG6 quad shield cable transfers signals 3 times faster and prevents signal loss up to 8 times better than standard RG6 cable. Amerelle Wall Plate, Duplex, 1 Gangs, 2 Outlets, Wood, Light Oak, Screw Mounting, Includes: Matching Screws, UL Listed Copper-free die cast aluminum. Use to gain access to the interior of a raceway for wire pulling, inspection and maintenance. UL Approved. Tray boxed.
Halex 64110 Conduit Elbow AmerTac Zenith VQ300606B RG6 Coaxial Cable Arrow Hart 2131W-BOX Round Wall Plate
Use to allow a 90 degree change of direction in a run of Rigid or IMC conduit. UL Listed. Designed to optimize performance from digital sources such as HDTV. 75 ohm, corrosion resistant brass "F" compression connectors. 24 K gold electroplated connectors. Aluminum braided shield prevents signal loss, aluminum foil shield minimizes interference. Heavy duty outer jacket for long life protection. RG6 quad shield cable transfers signals 3 times faster and prevents signal loss up to 8 times better than standard RG6 cable. Molded from non-flammable thermoset. Flush fitting, warp resistant design. Screw-catch feature holds mounting screws captive and simplifies installation. Matching screws provided. High gloss finish is soil resistant. Standard size - 2.75" x 4.50", boxed.
Halex 94110 Pull Conduit Elbow with Neoprene Gasket Halex 58810 Rigid Threaded Conduit Body with Cover and Gasket Arrow Hart CRL530R  Locking Twist Electrical Receptacle
Zinc die cast. Indoors or outdoors. Use as a wire pulling elbow to facilitate wire pulling through a sharp bend in a run of threaded Rigid or IMC conduit. Removable cover provides easy access to wiring. UL Approved. Bulk packed. Copper-free die cast aluminum. Indoors or outdoors. Use to gain access to the interior of a raceway for wire pulling, splicing (with limitations as specified by the NEC), and maintenance. UL Approved. Tray boxed. Rugged nylon face and body. Clearly marked rating, NEMA configuration and approval listings on receptacle face. One piece brass contacts for performance and minimum heat rise. Back wire terminal clamps for secure wiring. Combination head screws standard - slot/Phillips.
Arrow Hart AH8300W  Duplex Receptacle Arrow Hart AH8300RD  Duplex Receptacle Arrow Hart AH8300V  Duplex Receptacle
Heavy gauge brass line contacts. High impact and chemical-resistant nylon face. Automatic grounding system. Terminal sizes number 14 - 10 AWG. Voltage ratings permanently marked on device. Materials face and base are nylon, strap is 0.05" thick steel, zinc plated, auto ground clip is bronze wire. Line contacts are 0.037" triple-wipe brass, terminal screws  are number 8-32 steel, ground screw is  number 8-32 steel (green). Screw terminal guards are PVC. Listed to UL 498, UL verified to Federal Spec. WC-596G, CSA Certified to C22.2, no. 42. Flammability meets UL 94 requirements; V2.temperature rating: -4 to 158 degrees F. Dielectric voltage: withstands 2000 volts per UL 498. Heavy gauge brass line contacts. High impact and chemical-resistant nylon face. Automatic grounding system. Terminal sizes number 14 - 10 AWG. Voltage ratings permanently marked on device. Materials face and base are nylon, strap is 0.05" thick steel, zinc plated, auto ground clip is bronze wire. Line contacts are 0.037" triple-wipe br