Home > ELECTRICAL > SPECIALTY ELECTRICAL > FIRE/HOME PROTECTION > CARBON MONOXIDE DETECTORS
Sort By:
1
Halex 97521 Insulated Conduit Bushing Arrow Hart 2131 Standard Wall Plate Arrow Hart 2131V-BOX Round Wall Plate
High impact thermoplastic. Flame retardant to 105 degrees C. Use with locknut to terminate threaded Rigid or IMC conduit to an outlet box. The rounded surface of the bushing prevents damage to wire insulation. Required by the NEC. UL Listed, CSA Approved. Molded from non-flammable thermoset. Flush fitting, warp resistant design. Screw-catch feature holds mounting screws captive and simplifies installation. Matching screws provided. High gloss finish is soil resistant. Standard size - 2.75" x 4.50", boxed. Molded from non-flammable thermoset. Flush fitting, warp resistant design. Screw-catch feature holds mounting screws captive and simplifies installation. Matching screws provided. High gloss finish is soil resistant. Standard size - 2.75" x 4.50", boxed.
Halex 97522 Insulated Conduit Bushing Arrow Hart 2151W-BOX Decorator Wall Plate Halex 97525 Insulated Conduit Bushing
High impact thermoplastic. Flame retardant to 105 degrees C. Use with locknut to terminate threaded Rigid or IMC conduit to an outlet box. The rounded surface of the bushing prevents damage to wire insulation. Required by the NEC. UL Listed, CSA Approved. Molded from non-flammable thermoset. Flush fitting, warp resistant design. Matching screws provided. High gloss finish is soil resistant. Standard size - 2.75" x 4.50", boxed. High impact thermoplastic. Flame retardant to 105 degrees C. Use with locknut to terminate threaded Rigid or IMC conduit to an outlet box. The rounded surface of the bushing prevents damage to wire insulation. Required by the NEC. UL Listed, CSA Approved.
Arrow Hart 2151V-BOX Decorator Wall Plate Arrow Hart 2151 Decorative Standard Wall Plate WALLPLATE DECO 1G
WALLPLATE DECO 1G
Our Price: $0.58
Molded from non-flammable thermoset. Flush fitting, warp resistant design. Matching screws provided. High gloss finish is soil resistant. Standard size - 2.75" x 4.50", boxed. Molded from non-flammable thermoset. Flush fitting, warp resistant design. Matching screws provided. High gloss finish is soil resistant. Standard size - 2.75" x 4.50", boxed. Molded from non-flammable thermoset. Flush fitting, warp resistant design. Matching screws provided. High gloss finish is soil resistant. Standard size - 2.75" x 4.50", boxed.
Halex 96191 Rigid IMC Conduit Locknut Halex 90440 Screw-In Connector Halex 97523 Insulated Conduit Bushing
Steel with zinc plating. Indoor or outdoor applications. Use to secure Rigid or IMC conduit or various threaded fittings to a steel outlet box or other metal enclosure. Zinc die cast. Use to connect flexible metallic conduit (Greenfield) to steel outlet box, load center or other metal enclosure. Fits 1/2" knock outs. High impact thermoplastic. Flame retardant to 105 degrees C. Use with locknut to terminate threaded Rigid or IMC conduit to an outlet box. The rounded surface of the bushing prevents damage to wire insulation. Required by the NEC. UL Listed, CSA Approved.
Halex 96071 Knock Out Seals Halex 96072 Knock Out Seals Halex 96192 Rigid IMC Conduit Locknut
Use to cover exposed knock-out holes in steel outlet boxes and other metal enclosures. Use to cover exposed knock-out holes in steel outlet boxes and other metal enclosures. Steel with zinc plating. Indoor or outdoor applications. Use to secure Rigid or IMC conduit or various threaded fittings to a steel outlet box or other metal enclosure.
Halex 26190 Conduit Locknut Halex 97524 Insulated Conduit Bushing Halex 96193 Rigid Conduit Locknut
Halex Conduit Locknut, 1/2 in Nominal, Steel, Zinc Plated, CSA Certified, UL Listed, For use to secure rigid, imc conduit or various threaded fittings to a steel outlet box or other metal enclosure, indoor/outdoor High impact thermoplastic. Flame retardant to 105 degrees C. Use with locknut to terminate threaded Rigid or IMC conduit to an outlet box. The rounded surface of the bushing prevents damage to wire insulation. Required by the NEC. UL Listed, CSA Approved. Steel with zinc plating. Indoor or outdoor applications. Use to secure Rigid or IMC conduit or various threaded fittings to a steel outlet box or other metal enclosure.
Halex 91211 Concrete Tight Set Screw Connector Halex 90441 Screw-In Connector Halex 90451 Screw-In Coupling
Zinc die cast. Use to connect EMT conduit to steel outlet box, load center or other metal enclosure. UL Approved. Zinc die cast. Use to connect flexible metallic conduit (Greenfield) to steel outlet box, load center or other metal enclosure. Fits 1/2" knock outs. Zinc die cast. Use to join two pieces of flexible metallic conduit (Greenfield) together.
WALLPLATE RCPT LT ALMOND 1G   Halex 91221 Concrete Tight Set Screw Coupling Halex 91530 Combination Coupling
Virtually unbreakable, with high structural rigidity, long-term form retention and impact and abrasion resistance. Screw-catch feature holds mounting screws captive. Matching screws provided. High gloss finish is soil resistant. Mid-size - 3.125" x 4.875". Zinc die cast. Use to join two lengths of EMT conduit together. UL Approved. Zinc die cast. Use to join EMT conduit to non-metallic sheathed cable. #14/2, #12/3 or 2 #14/2. Indoor use only. With UPC. UL Approved.
Halex 90580 Cable Connector Halex 90510 Twin Screw Clamp Connector Halex 96194 Rigid IMC Conduit Locknut
Zinc die cast. In a dry location, use to connect BX cable to a steel outlet box or other metal enclosure. 3/8" size fits 1/2" knock outs. UL Approved. Fits 1/2" knockout, non-metallic cable numbers 14/2, 12/2, 12/3 AWG or 2 number 14/2 AWG or flex cord .300 to .560 inches diameter. In a dry location, use to connect nonmetallic sheathed cable to a steel outlet box or other metal enclosure. UL, Listed, meets CSA requirements. Steel with zinc plating. Indoor or outdoor applications. Use to secure Rigid or IMC conduit or various threaded fittings to a steel outlet box or other metal enclosure.
Halex 90481 Concrete Tight Set Screw Connector Halex 91212 Concrete Tight Set Screw Connector Halex 91222 Concrete Tight Set Screw Coupling
Zinc die cast. In a dry location, use to connect flexible metallic conduit (Greenfield or BX) to a steel outlet box or other metal enclosure. UL Approved. Zinc die cast. Use to connect EMT conduit to steel outlet box, load center or other metal enclosure. UL Approved. Zinc die cast. Use to join two lengths of EMT conduit together. UL Approved.
Halex 90570 Combination Clamp Connector Halex 96510 2-Piece Butterfly Clamp Connector Arrow Hart 2152W-BOX Decorator Wall Plate
Zinc die cast. In a dry location, use to connect flexible metallic conduit (Greenfield, BX, NM or Metal Clad) to a steel outlet box or other metal enclosure. 3/8" size fits 1/2" knock outs. UL Approved. Zinc die cast. In a dry location, use to secure #14 - #10 non-metallic sheathed cable to steel outlet box or other metal enclosure. No locknut required. Molded from non-flammable thermoset. Flush fitting, warp resistant design. Matching screws provided. High gloss finish is soil resistant. Standard size - 4.50" x 4.563", boxed.
Arrow Hart 2152V-BOX Decorator Wall Plate WALLPLATE ROCKER 2G           Halex 90442 Screw-In Connector
WALLPLATE ROCKER 2G
Our Price: $1.30
Molded from non-flammable thermoset. Flush fitting, warp resistant design. Matching screws provided. High gloss finish is soil resistant. Standard size - 4.50" x 4.563", boxed. Molded from non-flammable thermoset. Flush fitting, warp resistant design. Matching screws provided. High gloss finish is soil resistant. Standard size - 4.50" x 4.563", boxed. Zinc die cast. Use to connect flexible metallic conduit (Greenfield) to steel outlet box, load center or other metal enclosure. Fits 1/2" knock outs.
Halex 91100 Conduit Elbow Halex 96195 Rigid Conduit Locknut Halex 90420 Squeeze Connector
Zinc die cast. In a dry location, use to connect flexible metallic conduit (Greenfield or BX) to a steel outlet box or other metal enclosure. Steel with zinc plating. Indoor or outdoor applications. Use to secure Rigid or IMC conduit or various threaded fittings to a steel outlet box or other metal enclosure. Zinc die cast. In a dry location, use to connect flexible metallic conduit (Greenfield or BX) to steel outlet box, load center or other metal enclosure. Fits 1/2" knock outs. UL Approved.
Halex 65705B Snap-In Cable Connector Halex 12110 Concrete Tight Set Screw Connector Halex 90512 Twin Screw Clamp Connector
In a dry location, use to connect aluminum or steel AC, aluminum MC, and steel flexible metal conduit. Suitable for: aluminum and steel armored cable with 14/2 - 10/2 wire, steel flexible metal conduit, .45 diameter aluminum interlocked MC cable. Features snap-in installation, no locknut, insulating bushing included. Zinc die cast. Use to connect EMT conduit to steel outlet box, load center or other metal enclosure. UL Approved. Fits non metallic cable, such as Romex, number 14/2 round, number 12/3-8/3 AWG or flex cord .460 to .720 inches diameter. In a dry location, use to connect nonmetallic sheathed cable to a steel outlet box or other metal enclosure. UL Listed, meets CSA requirements.
Halex 26071 Knock Out Seals Halex 27511 Hit Lock Cable Connectors Halex 90421 Squeeze Connector
Use to cover exposed knock-out holes in steel outlet boxes and other metal enclosures. Fits NM Cable: #14/2, #14/3, #12/2, #10/2, #10/3. Snap-In, no screws or locknuts required. In a dry location, use to connect non-metallic sheathed cable to a steel outlet box or other metal enclosure. Design allows for two-step installation. Push into box and insert cable. UL Approved, CSA certified. Zinc die cast. In a dry location, use to connect flexible metallic conduit (Greenfield or BX) to steel outlet box, load center or other metal enclosure. Fits 1/2" knock outs. UL Approved.
Halex 97526 Insulated Conduit Bushing Halex 75403 Anti-Short Conduit Bushing Halex 12210B Concrete Tight Set Screw Coupling
High impact thermoplastic. Flame retardant to 105 degrees C. Use with locknut to terminate threaded Rigid or IMC conduit to an outlet box. The rounded surface of the bushing prevents damage to wire insulation. Required by the NEC. UL Listed, CSA Approved. High dielectric plastic. Use to protect wire within flexible metallic conduit (Greenfield, BX). Insert one bushing at each end of conduit. UL Approved. No. 75400 - Fits cable range: 14/2, 14/3, 12/2 No. 75401 - Fits cable range: 14/4, 12/3, 6/1, 4/1. No. 75402 - Fits cable range: 12/4, 10/2, 10/3, 2/1. No. 75403 - Fits cable range: 10/4, 8/2, 8/3, 1/1. No. 75404 - Fits cable range: 8/4, 6/2, 6/3, 4/2, 4/3, 6/4. Zinc die cast. Use to join two lengths of EMT conduit together. UL Approved.
CONNECTOR DPLX FLX N-MTL 3/8IN Halex 91531 Combination Coupling Halex 90513 Twin Screw Clamp Connector
In a dry location, use to connect two pieces of flexible armored cable (Greenfield or BX) to a steel outlet box or other metal enclosure, when using only one knock-out opening. UL Approved. Zinc die cast. Use to join EMT conduit to flexible metal conduit. Indoor use only. With UPC. UL Approved. Fits non metallic cable number 14/2 to number 6/3 AWG or number 3/10/3 AWG or flex cord .450 to .730 inches diameter. With a 1/2" knockout. In a dry location, use to connect nonmetallic sheathed cable to a steel outlet box or other metal enclosure. UL Listed, meets CSA requirements.
Halex 90422 Squeeze Connector Halex 20511 Twin Screw Clamp Connector Halex 91101 Conduit Elbow
Zinc die cast. In a dry location, use to connect flexible metallic conduit (Greenfield or BX) to steel outlet box, load center or other metal enclosure. Fits 1/2" knock outs. UL Approved. Fits 1/2" knockout, non-metallic cable numbers 14/2, 12/2, 12/3 AWG or 2 number 14/2 AWG or flex cord .300 to .560 inches diameter. In a dry location, use to connect nonmetallic sheathed cable to a steel outlet box or other metal enclosure. UL, Listed, meets CSA requirements. Zinc die cast. In a dry location, use to connect flexible metallic conduit (Greenfield or BX) to a steel outlet box or other metal enclosure.
Arrow Hart 2163W-BOX Decorator Wall Plate Arrow Hart 2163V-BOX Decorator Wall Plate WALLPLATE ROCKER 3G
WALLPLATE ROCKER 3G
Our Price: $1.88
Molded from non-flammable thermoset. Flush fitting, warp resistant design. Screw-catch feature holds mounting screws captive and simplifies installation. Matching screws provided. High gloss finish is soil resistant. Standard size - 4.50" x 6.375", boxed. Molded from non-flammable thermoset. Flush fitting, warp resistant design. Screw-catch feature holds mounting screws captive and simplifies installation. Matching screws provided. High gloss finish is soil resistant. Standard size - 4.50" x 6.375", boxed. Molded from non-flammable thermoset. Flush fitting, warp resistant design. Screw-catch feature holds mounting screws captive and simplifies installation. Matching screws provided. High gloss finish is soil resistant. Standard size - 4.50" x 6.375", boxed.
Halex 03705B Concrete Tight Set Screw Conduit Offset Halex 90371 Concrete Tight Set Screw Conduit Offset Halex 96196 Rigid IMC Conduit Locknut
Zinc die cast. Use to connect EMT conduit to a metal outlet box or enclosure where an offset is desired. UL Approved. Zinc die cast. Use to connect EMT conduit to a metal outlet box or enclosure where an offset is desired. UL Approved. Steel with zinc plating. Indoor or outdoor applications. Use to secure Rigid or IMC conduit or various threaded fittings to a steel outlet box or other metal enclosure.
Halex 90514 Twin Screw Clamp Connector Cooper BP231B-SP Wall Plate Screw Cooper BP231W-SP Wall Plate Screw
Fits non metallic cable number 6/3 to number 2/3 AWG flex cord .800 to 1.350 inches diameter or SE cable 3 conductor or 3 number 1/0 minimum; 3 conductor or 3 number 2/0 maximum. With 1/2" knockout. In a dry location, use to connect nonmetallic sheathed cable to a steel outlet box or other metal enclosure. UL Listed, meets CSA requirements. Colors to match wall plates. 6/32" x 1/2". UL Listed. Colors to match wall plates. 6/32" x 1/2". UL Listed.
Cooper BP231V-SP Wall Plate Screw Halex 75400 Anti-Short Conduit Bushing Halex 75225 Insulated Conduit Bushing
Colors to match wall plates. 6/32" x 1/2". UL Listed. High dielectric plastic. Use to protect wire within flexible metallic conduit (Greenfield, BX). Insert one bushing at each end of conduit. UL Approved. No. 75400 - Fits cable range: 14/2, 14/3, 12/2 No. 75401 - Fits cable range: 14/4, 12/3, 6/1, 4/1. No. 75402 - Fits cable range: 12/4, 10/2, 10/3, 2/1. No. 75403 - Fits cable range: 10/4, 8/2, 8/3, 1/1. No. 75404 - Fits cable range: 8/4, 6/2, 6/3, 4/2, 4/3, 6/4. High impact thermoplastic. Flame retardant to 105 degrees C. Use with locknut to terminate threaded Rigid or IMC conduit to an outlet box. The rounded surface of the bushing prevents damage to wire insulation. Required by the NEC. UL Listed, CSA Approved.
Halex 01925B IMC Conduit Locknut Arrow Hart STC1V Mid Size Wall Plate Arrow Hart STC1W Mid Size Wall Plate
Use to secure Rigid or IMC conduit or various threaded fittings to a steel outlet box or other metal enclosure. Bulk packed. Center Plate. Thermoplastic construction for durability and flexibility. Easy to snap together and lock. Mid-size design to fit over most existing wall openings. Screw-Catch feature holds already attached mounting screws captive for easy installation. Screws are slotted steel, baked enamel and painted. Meets current Federal specifications as tested to UL 514. Meets all CSA requirements C22.2, No. 42.1., CSA file #9294 (4413-02), UL and cUL Listed, UL File #E33216. NEMA WD-1, WD-6. Temperature rating -40 degrees C to 65 degrees C. Center Plate. Thermoplastic construction for durability and flexibility. Easy to snap together and lock. Mid-size design to fit over most existing wall openings. Screw-Catch feature holds already attached mounting screws captive for easy installation. Screws are slotted steel, baked enamel and painted. Meets current Federal specifications as tested to UL 514. Meets all CSA requirements C22.2, No. 42.1., CSA file #9294 (4413-02), UL and cUL Listed, UL File #E33216. NEMA WD-1, WD-6. Temperature rating -40 degrees C to 65 degrees C.
Arrow Hart STE1W Mid Size Wall Plate Arrow Hart STE1V Mid Size Wall Plate Halex 90452 Screw-In Coupling
End plate. Single toggle. Decorator style. High gloss finish. Thermoplastic construction for durability and flexibility. Easy to snap together and lock. Mid-size design to fit over most existing wall openings. Screw-catch feature holds already attached mounting screws captive for easy installation. Screws are slotted steel, baked enamel and painted. Meets current Federal specifications as tested to UL 514. Temperature rating -40 degrees C to 70 degrees C. UL Listed, meets CSA standard. NEMA WD-1, WD-6. End plate. Single toggle. Decorator style. High gloss finish. Thermoplastic construction for durability and flexibility. Easy to snap together and lock. Mid-size design to fit over most existing wall openings. Screw-catch feature holds already attached mounting screws captive for easy installation. Screws are slotted steel, baked enamel and painted. Meets current Federal specifications as tested to UL 514. Temperature rating -40 degrees C to 70 degrees C. UL Listed, meets CSA standard. NEMA WD-1, WD-6. Zinc die cast. Use to join two pieces of flexible metallic conduit (Greenfield) together.
Halex 90661 Standard Water-Tight Connector Halex 12112 Concrete Tight Set Screw Connector Halex 11005B Conduit Elbow
Die cast of high strength zinc alloy. Use to secure SE/SEU cable to a metal enclosure. Use to connect UF cable to a waterproof box with a threaded hub. Zinc die cast. Use to connect EMT conduit to steel outlet box, load center or other metal enclosure. UL Approved. Zinc die cast. In a dry location, use to connect flexible metallic conduit (Greenfield or BX) to a steel outlet box or other metal enclosure.
Halex 21210 Concrete Tight Set Screw Connector Halex 03707B Concrete Tight Set Screw Conduit Offset Halex 12212 Concrete Tight Set Screw Coupling
Zinc die cast. Use to connect EMT conduit to steel outlet box, load center or other metal enclosure. UL Approved. Zinc die cast. Use to connect EMT conduit to a metal outlet box or enclosure where an offset is desired. UL Approved. Zinc die cast. Use to join two lengths of EMT conduit together. UL Approved.
Halex 20581 Cable Connector Halex 75230 Insulated Conduit Bushing Halex 90662 Standard Water-Tight Connector
In a dry location, use to connect AC (BX) cable to a steel outlet box or other metal enclosure. Suitable for #14-2 steel armored cable. High impact thermoplastic. Flame retardant to 105 degrees C. Use with locknut to terminate threaded Rigid or IMC conduit to an outlet box. The rounded surface of the bushing prevents damage to wire insulation. Required by the NEC. UL Listed, CSA Approved. Die cast of high strength zinc alloy. Use to secure SE/SEU cable to a metal enclosure. Use to connect UF cable to a waterproof box with a threaded hub.
Halex 75401 Anti-Short Conduit Bushing Halex 90372 Concrete Tight Set Screw Conduit Offset Halex 91102 Pull Conduit Elbow
High dielectric plastic. Use to protect wire within flexible metallic conduit (Greenfield, BX). Insert one bushing at each end of conduit. UL Approved. No. 75400 - Fits cable range: 14/2, 14/3, 12/2 No. 75401 - Fits cable range: 14/4, 12/3, 6/1, 4/1. No. 75402 - Fits cable range: 12/4, 10/2, 10/3, 2/1. No. 75403 - Fits cable range: 10/4, 8/2, 8/3, 1/1. No. 75404 - Fits cable range: 8/4, 6/2, 6/3, 4/2, 4/3, 6/4. Zinc die cast. Use to connect EMT conduit to a metal outlet box or enclosure where an offset is desired. UL Approved. Zinc die cast. In a dry location, use to connect flexible metallic conduit (Greenfield or BX) to a steel outlet box or other metal enclosure.
Halex 26073 Knock Out Seals AmerTac 935DAL Wall Plate Arrow Hart 93401-BOX Decorator Wall Plate
Use to cover exposed knock-out holes in steel outlet boxes and other metal enclosures. With screws. 5" height x 2-3/4" width x 1/4" depth. Made of Type 304 stainless steel alloy for superior non-magnetic corrosion-resistant properties. Plates are 0.032" thick. Brushed satin finish resists fingerprints. Matching stainless steel mounting screws provided. Standard size - 2.75" x 4.50", boxed.
Arrow Hart 93111-BOX Standard Wall Plate Halex 27519 Hit Lock Cable Connectors Arrow Hart 93091-BOX Standard Wall Plate
Made of Type 304 stainless steel alloy for superior non-magnetic corrosion-resistant properties. Plates are 0.032" thick. Brushed satin finish resists fingerprints. Matching stainless steel mounting screws provided. Standard size - 2.75" x 4.50", with 1.594" hole. Fits NM Cable: #14/2, #14/3, #12/2, #10/2, #10/3. Snap-In, no screws or locknuts required. In a dry location, use to connect non-metallic sheathed cable to a steel outlet box or other metal enclosure. Design allows for two-step installation. Push into box and insert cable. UL Approved, CSA certified. Made of Type 304 stainless steel alloy for superior non-magnetic corrosion-resistant properties. Plates are 0.032" thick. Brushed satin finish resists fingerprints. Matching stainless steel mounting screws provided. Standard size - 2.75" x 4.50", with 1.406" hole, boxed.
Halex 75402 Anti-Short Conduit Bushing CABLE AUXILIARY RETRACTABLE   Halex 64405 Conduit Elbow
High dielectric plastic. Use to protect wire within flexible metallic conduit (Greenfield, BX). Insert one bushing at each end of conduit. UL Approved. No. 75400 - Fits cable range: 14/2, 14/3, 12/2 No. 75401 - Fits cable range: 14/4, 12/3, 6/1, 4/1. No. 75402 - Fits cable range: 12/4, 10/2, 10/3, 2/1. No. 75403 - Fits cable range: 10/4, 8/2, 8/3, 1/1. No. 75404 - Fits cable range: 8/4, 6/2, 6/3, 4/2, 4/3, 6/4. Retractable 3.5mm male to 3.5mm male auxiliary audio cable. To connect EMT conduit together to allow for 90 degree bends. UL Approved.
Halex 12215 Concrete Tight Set Screw Coupling Halex 14405 Pull Conduit Elbow LOCK NUT SEALER 1/2IN
LOCK NUT SEALER 1/2IN
Our Price: $3.36
Zinc die cast. Use to join two lengths of EMT conduit together. UL Approved. Zinc die cast. Removable steel cover facilitates wire pulling. Use to connect EMT conduit together at a 90 degree bend. Tray box. Secures rigid or IMC conduit, or threaded fittings to steel outlet boxes or other steel boxes where moisture proofing is needed. Steel with zinc plating, pre-molded seal on one side.
Halex 26074 Knock Out Seals Halex 05115 Twin Screw Clamp Connector Halex 12115 Concrete Tight Set Screw Connector
Use to cover exposed knock-out holes in steel outlet boxes and other metal enclosures. Fits non metallic cable, flex cords, multi flex cords; fitting range .834 - 1.520 inches diameter SE cables 2 conductor 4/0. With 1/2" knockout. In a dry location, use to connect nonmetallic sheathed cable to a steel outlet box or other metal enclosure. UL Listed, meets CSA requirements. Tray boxed. Zinc die cast. Use to connect EMT conduit to steel outlet box, load center or other metal enclosure. UL Approved.
AmerTac 935DW Wall Plate Arrow Hart PJS1 Mid Size Screw less Wall Plate Arrow Hart PJS1 Mid Size Screw less Wall Plate
With screws. 5" height x 2-3/4" width x 1/4" depth. Screwless mid-size switch plate wall plates are virtually unbreakable and present a clean, minimalist look that can be changed in seconds. Easy installation, simply screw the mounting plate onto the wiring device and press into place. Screwless mid-size switch plate wall plates are virtually unbreakable and present a clean, minimalist look that can be changed in seconds. Easy installation, simply screw the mounting plate onto the wiring device and press into place.
Allied 101543 EMT Electrical Conduit Halex 07310 Compression Standard Water-Tight Connector Halex 21212 Concrete Tight Set Screw Connector
High grade mild strip steel, hot galvanized with a process that combines zinc, a conversion coating, and a clear organic polymer top-coat to form a triple layer of protection against corrosion and abrasion, has a low friction ID coating that improves the slip properties between conduit and wire. It provides easy bending, cutting and joining while resisting flattening, kinking and splitting. Reduces electromagnetic fields, effectively shielding computers and sensitive electronic equipment from the electromagnetic interference caused by power distribution systems. UL Listed, meets ANSI C80.3. Die cast of high strength zinc alloy. Use to secure SE/SEU cable to a metal enclosure. Use to connect UF cable to a waterproof box with a threaded hub. Zinc die cast. Use to connect EMT conduit to steel outlet box, load center or other metal enclosure. UL Approved.
Halex 26075 Knock Out Seals Halex 26512 2-Piece Butterfly Clamp Connector Amerelle Century 1-Rocker 1-Toggle Wall Plate
Use to cover exposed knock-out holes in steel outlet boxes and other metal enclosures. Zinc die cast. In a dry location, use to secure #14 - #10 non-metallic sheathed cable to steel outlet box or other metal enclosure. No locknut required. Amerelle Wall Plate, 1-Rocker, 1-Toggle, Series: Century, 4-15/16 in Length, 4-9/16 in Width, 2 Gangs, Stamped Steel, Brushed Nickel, Screw Mounting, Includes: Matching Screws, UL Listed
Arrow Hart 39CH-BOX Wall Plate Halex 12120 Concrete Tight Set Screw Connector Halex 64505 Conduit Elbow
Full gauge and size beveled-edge; furnished with mounting screws. Fit 1253, 1254 and 1263 flush receptacles. Standard size - 2.75" x 4.50", boxed. Zinc die cast. Use to connect EMT conduit to steel outlet box, load center or other metal enclosure. UL Approved. To connect EMT conduit together to allow for 45 degree bends.
Arrow Hart Eagle 69-BOX Standard Wall Plate Halex 64507 Conduit Elbow Halex 14407 Pull Conduit Elbow
Fits 1257 and 1258 flush receptacles. To connect EMT conduit together to allow for 45 degree bends. Zinc die cast. Removable steel cover facilitates wire pulling. Use to connect EMT conduit together at a 90 degree bend. Tray box.
Arrow Hart Eagle 68-BOX Standard Wall Plate Halex 58005 Standard Weatherhead Service Entrance Cap CABLE MICRO USB CHARGER 3FT
Standard size two gang metal wallplate for power devices using a 2.1563" single opening. Aluminum die cast. Indoor or outdoor applications. Use in an overhead service entrance. Mounts on top of EMT, Rigid or IMC conduit. Serves as a connecting point for the service entrance wires. UL Listed meets CSA requirements. Tray boxed. USB charge and sync data cord.
Halex 61820B IMC Sealer Locknut Halex 12220 Concrete Tight Set Screw Coupling Carlon E995GR Meter Offset
Secures rigid or IMC conduit, or threaded fittings to steel outlet boxes or other steel boxes where moisture proofing is needed. Steel with zinc plating, pre-molded seal on one side. Zinc die cast. Use to join two lengths of EMT conduit together. UL Approved. For installation from Schedule 40/80 non-metallic conduit runs into meter box. Will not rust or corrode.
Halex 20491 Combination Coupling Halex 58007 Clamp On Weatherhead Service Entrance Cap Halex 05120 Twin Screw Clamp Connector
Use to joint EMT conduit to flexible metal conduit. Die cast zinc. UL Approved, CSA Certified. Aluminum die cast. Indoor or outdoor applications. Use in an overhead service entrance. Mounts on top of EMT, Rigid or IMC conduit. Serves as a connecting point for the service entrance wires. UL Listed meets CSA requirements. Tray boxed. Fits non metallic cable, flex cords, multi flex cords fitting range 1.085 - 1.520 inches diameter. With 1/2" knockout. In a dry location, use to connect nonmetallic sheathed cable to a steel outlet box or other metal enclosure. UL Listed, meets CSA requirements. Tray boxed.
Carlon E998E-CAR Service Entrance Cap Carlon E995J-CTN Meter Offset Halex 20510 Twin Screw Clamp Connector
Safe, non-conductive. To bring overhead wiring from outside into conduit run. Will not rust or corrode. For use with Schedule 40/80 non-metallic solvent weld fittings. For installation from Schedule 40/80 non-metallic conduit runs into meter box. Will not rust or corrode. Fits 1/2" knockout, non-metallic cable numbers 14/2, 12/2, 12/3 AWG or 2 number 14/2 AWG or flex cord .300 to .560 inches diameter. In a dry location, use to connect nonmetallic sheathed cable to a steel outlet box or other metal enclosure. UL, Listed, meets CSA requirements.
AmerTac 161D Square Corner Wall Plate AmerTac 163DBR Square Corner Wall Plate Halex 64407 Conduit Elbow
Traditional square corner design. With screws. 5" height x 2-7/8" width x 1/4" depth. Traditional square corner design. With screws. 5" height x 2-7/8" width x 1/4" depth. To connect EMT conduit together to allow for 90 degree bends. UL Approved.
Halex 26250 Concrete Tight Rain Tight Compression Connector Halex 21222 Concrete Tight Set Screw Coupling Halex 60416 Light Duty Wire Holder
Concrete-tight and rain-tight. Use to connect EMT conduit to steel outlet box, load center, or other metal enclosure in a wet location. Zinc die cast. Use to join two lengths of EMT conduit together. UL Approved. Used indoors or outdoors to secure incoming service entrance wires. Reinforced. Porcelain and steel. Tray box.
Halex 20512 Twin Screw Clamp Connector Arrow Hart PJ1EMRD Mid Size Wall Plate AmerTac Zenith TL1007W Telephone Cord
Fits non metallic cable, such as Romex, number 14/2 round, number 12/3-8/3 AWG or flex cord .460 to .720 inches diameter. In a dry location, use to connect nonmetallic sheathed cable to a steel outlet box or other metal enclosure. UL Listed, meets CSA requirements. Molded from non-flammable Polycarbonate, pre-marked "EMERGENCY" with indelible printing guaranteed not to fade, bleed or rub off. High letters for easy identification. Virtually unbreakable, with high structural rigidity, long-term form retention and superior impact and abrasion resistance. Screw-catch feature holds mounting screws captive and simplifies installation. Matching screws provided. High gloss finish is soil resistant. Mid-size - 3.125" x 4.875". Connects phone or modem to phone outlet.
Arrow Hart Eagle 2168 Standard Wall Plate Halex 26571 Flexible MC Snap-In Connector Halex 14605 Inside Corner Pull Conduit Elbow
Screw-catch feature holds mounting screws captive and simplifies installation. Matching mounting screws provided. Halex MC Snap-In Connector, Flexible, 3/8 in Nominal, Steel, Includes: Insulating Bushing, CSA Certified, UL Listed, For use to connect aluminum or steel ac, aluminum mc, and steel flexible metal conduit, indoor use only Zinc die-cast. Removable steel cover facilitates wire pulling. Use to connect EMT conduit together at an inside corner. UL listed, CSA Approved. Tray boxed.
Halex 26076 Knock Out Seals Halex 21211 Concrete Tight Set Screw Connector Carlon E998F-CAR Standard Weatherhead Service Entrance Cap
Use to cover exposed knock-out holes in steel outlet boxes and other metal enclosures. Zinc die cast. Use to connect EMT conduit to steel outlet box, load center or other metal enclosure. UL Approved. Safe, non-conductive. To bring overhead wiring from outside into conduit run. Will not rust or corrode. For use with Schedule 40/80 non-metallic solvent weld fittings.
Halex 08212B Compression Standard Water-Tight Connector AmerTac Zenith TL1012W Telephone Cord Arrow Hart 2164 Decorative Standard Wall Plate
Die cast of high strength zinc alloy. Use to secure SE/SEU cable to a metal enclosure. Use to connect UF cable to a waterproof box with a threaded hub. Connects phone or modem to phone outlet. Molded from non-flammable thermoset. Flush fitting, warp resistant design. Screw-catch feature holds mounting screws captive and simplifies installation. Matching screws provided. High gloss finish is soil resistant. Standard size.
Arrow Hart 2164 Decorative Standard Wall Plate Amerelle Traditional Duplex Wall Plate Arrow Hart PJS2 Mid Size Screw less Wall Plate
Molded from non-flammable thermoset. Flush fitting, warp resistant design. Screw-catch feature holds mounting screws captive and simplifies installation. Matching screws provided. High gloss finish is soil resistant. Standard size. Amerelle Wall Plate, Duplex, Series: Traditional, 1 Gangs, 2 Outlets, Stamped Steel, Brushed Nickel, Wall Mounting, Includes: Matching Screws, UL Listed Screwless mid-size toggle wall plate, virtually unbreakable, clips easily into place with gentle pressure. Features clean appearance with no visible mounting hardware. Works with standard toggle switches. Molded from non-flammable Polycarbonate, with high structural rigidity, long-term form retention and superior impact and abrasion resistance.
Arrow Hart PJS2 Mid Size Screw less Wall Plate Halex 21221 Concrete Tight Set Screw Coupling Halex 04212 Squeeze Connector
Screwless mid-size toggle wall plate, virtually unbreakable, clips easily into place with gentle pressure. Features clean appearance with no visible mounting hardware. Works with standard toggle switches. Molded from non-flammable Polycarbonate, with high structural rigidity, long-term form retention and superior impact and abrasion resistance. Zinc die cast. Use to join two lengths of EMT conduit together. UL Approved. Zinc die cast. In a dry location, use to connect flexible metallic conduit (Greenfield or BX) to steel outlet box, load center or other metal enclosure. Fits 1/2" knock outs. UL Approved.
Carlon E998G-CAR Service Entrance Cap Halex 95212B Insulated Metallic Grounding Conduit Bushing with Lug CABLE USB A-MICRO/MINI 3FT
Safe, non-conductive. To bring overhead wiring from outside into conduit run. Will not rust or corrode. For use with Schedule 40/80 non-metallic solvent weld fittings. Zinc die cast. Rounded surface prevents damage to insulation. Thermoplastic liner rated at 150 degree F. Indoor or outdoor use. Use with locknut to terminate service conduit to a cabinet. Lug provided for bonding jumper to a neutral bus bar. UL Listed, CSA Approved. USB Cable for charging or syncing pictures, music and videos from computer USB port. Molded strain relief. Supports high speed charging and fast data transmission.
Halex 58010 Clamp On Weatherhead Service Entrance Cap Halex 64410 Conduit Elbow CABLE MICRO USB GET POWER 12FT
Aluminum die cast. Indoor or outdoor applications. Use in an overhead service entrance. Mounts on top of EMT, Rigid or IMC conduit. Serves as a connecting point for the service entrance wires. UL Listed meets CSA requirements. Tray boxed. To connect EMT conduit together to allow for 90 degree bends. UL Approved. USB charge and sync data cord.
BUSHING GRND MTL INSUL 1-1/4IN CABLE USB BRAIDED MICRO       Allied 101550 EMT Electrical Conduit
Zinc die cast. Rounded surface prevents damage to insulation. Thermoplastic liner rated at 150 degree F. Indoor or outdoor use. Use with locknut to terminate service conduit to a cabinet. Lug provided for bonding jumper to a neutral bus bar. UL Listed, CSA Approved. USB charge and sync data cord. High grade mild strip steel, hot galvanized with a process that combines zinc, a conversion coating, and a clear organic polymer top-coat to form a triple layer of protection against corrosion and abrasion, has a low friction ID coating that improves the slip properties between conduit and wire. It provides easy bending, cutting and joining while resisting flattening, kinking and splitting. Reduces electromagnetic fields, effectively shielding computers and sensitive electronic equipment from the electromagnetic interference caused by power distribution systems. UL Listed, meets ANSI C80.3.
Arrow Hart PJS3 Mid Size Screw less Wall Plate AmerTac 935TDW Wall Plate CORD CHARGE MICRO VEHICLE USB
Screwless mid-size toggle wall plate, virtually unbreakable, clips easily into place with gentle pressure. Features clean appearance with no visible mounting hardware. Works with standard toggle switches. Molded from non-flammable Polycarbonate, with high structural rigidity, long-term form retention and superior impact and abrasion resistance. With screws. 5" height x 4-5/8" width x 1/4" depth. USB car adapter. 12 volts, USB ports. Works with most portable devices.
Halex 14607 Inside Corner Pull Conduit Elbow Carlon E998H-CAR Standard Weatherhead Service Entrance Cap GE TC100P Rainproof Conduit Hub
Zinc die-cast. Removable steel cover facilitates wire pulling. Use to connect EMT conduit together at an inside corner. UL listed, CSA Approved. Tray boxed. Safe, non-conductive. To bring overhead wiring from outside into conduit run. Will not rust or corrode. For use with Schedule 40/80 non-metallic solvent weld fittings. For outdoor enclosures with removable closing caps.
GE TC125P Rainproof Conduit Hub GE TC150P Rainproof Conduit Hub GE TC200P Rainproof Conduit Hub
For outdoor enclosures with removable closing caps. For outdoor enclosures with removable closing caps. For outdoor enclosures with removable closing caps.
Siemens EC38599 Type RX Conduit Hub Siemens EC38597 Type RX Conduit Hub Siemens EC38598 Type RX Conduit Hub
For use on all Siemans and Murry single position meter sockets. For use on all Siemans and Murry single position meter sockets. For use on all Siemans and Murry single position meter sockets.
Halex 58012 Clamp On Weatherhead Service Entrance Cap Halex 99526 Insulated Metallic Grounding Conduit Bushing with Lug Amerelle Metro Line Duplex Wall Plate
Aluminum die cast. Indoor or outdoor applications. Use in an overhead service entrance. Mounts on top of EMT, Rigid or IMC conduit. Serves as a connecting point for the service entrance wires. UL Listed meets CSA requirements. Tray boxed. Zinc die cast. Rounded surface prevents damage to insulation. Thermoplastic liner rated at 150 degree F. Indoor or outdoor use. Use with locknut to terminate service conduit to a cabinet. Lug provided for bonding jumper to a neutral bus bar. UL Listed, CSA Approved. Amerelle Wall Plate, Duplex, Series: Metro Line, 1 Gangs, 2 Outlets, Cast Metal, Brushed Nickel, Wall Mounting, Includes: Matching Screws, UL Listed
Halex 57499 Oval Standard Service Cable Cap IMC Halex 20492 Combination Coupling ADAPTER DC DUAL USB 2.1AMP
Copper-free aluminum die cast. Indoor or outdoor applications. Use in overhead services that utilize SEU cable. Tray boxed. Use to joint EMT conduit to flexible metal conduit. Die cast zinc. UL Approved, CSA Certified. USB car adapter. 12 volts, USB ports. Works with most portable devices.
AmerTac Zenith TL1025W Telephone Cord AmerTac Chelsea Duplex Wall Plate Amerelle Duplex Wall Plate
Connects phone or modem to phone outlet. AmerTac Wall Plate, Duplex, Series: Chelsea, 1 Gangs, 2 Outlets, Stamped Steel, Brushed Nickel, Wall Mounting, Includes: Matching Screws, UL Listed Amerelle Wall Plate, Duplex, Series: Contemporary, 1 Gangs, 2 Outlets, Wood, Unfinished Ash, Screw Mounting, Includes: Matching Screws, UL Listed
AmerTac Zenith TH1025B Telephone Cord AmerTac Zenith TH1025W Telephone Cord Arrow Hart PJS3 Mid Size Screw less Wall Plate
Connects phone handset to base. Connects phone handset to base. Screwless mid-size toggle wall plate, virtually unbreakable, clips easily into place with gentle pressure. Features clean appearance with no visible mounting hardware. Works with standard toggle switches. Molded from non-flammable Polycarbonate, with high structural rigidity, long-term form retention and superior impact and abrasion resistance.
Halex 60222 Wire Holder Halex 58705 EMT Set Screw Conduit Body with Cover and Gasket Halex 95215B Insulated Metallic Grounding Conduit Bushing with Lug
Used indoors or outdoors to secure incoming service entrance wires. Reinforced. Porcelain and steel. Tray box. Use to gain access to the interior of a raceway for wire pulling, splicing (with limitations as specified by the NEC), and maintenance. With cover and gasket. UL Approved. Tray boxed. Zinc die cast. Rounded surface prevents damage to insulation. Thermoplastic liner rated at 150 degree F. Indoor or outdoor use. Use with locknut to terminate service conduit to a cabinet. Lug provided for bonding jumper to a neutral bus bar. UL Listed, CSA Approved.
Halex 64412 Conduit Elbow Halex 95220B Insulated Metallic Grounding Conduit Bushing with Lug Siemens ECHS125 Type HS Conduit Hub
To connect EMT conduit together to allow for 90 degree bends. UL Approved. Zinc die cast. Rounded surface prevents damage to insulation. Thermoplastic liner rated at 150 degree F. Indoor or outdoor use. Use with locknut to terminate service conduit to a cabinet. Lug provided for bonding jumper to a neutral bus bar. UL Listed, CSA Approved. For use on all Siemens loadcenters, main lug, main breaker and meter socket; plus enclosed circuit breakers Nos. WB2225, WB3225.
LOCK NUT SEALER 2IN           Siemens ECHS150 Type HS Conduit Hub Amerelle 901DL Duplex Wall Plate
LOCK NUT SEALER 2IN
Our Price: $8.40
Secures rigid or IMC conduit, or threaded fittings to steel outlet boxes or other steel boxes where moisture proofing is needed. Steel with zinc plating, pre-molded seal on one side. For use on all Siemens loadcenters, main lug, main breaker and meter socket; plus enclosed circuit breakers Nos. WB2225, WB3225. Amerelle Wall Plate, Duplex, 1 Gangs, 2 Outlets, Wood, Light Oak, Screw Mounting, Includes: Matching Screws, UL Listed
HUB METER SKT TYPE RX 2-1/2IN Eaton DS125H1P Rainproof Conduit Hub Eaton DS150H1P Rainproof Conduit Hub
For use on all Siemans and Murry single position meter sockets. For use with MLO and MCB loadcenters and circuit breaker enclosures. For use with MLO and MCB loadcenters and circuit breaker enclosures.
Eaton ARP00004CH12 Type A Hub Closure Plate Eaton ARP00005CH15 Type A Hub Closure Plate Halex 58015 Clamp On Weatherhead Service Entrance Cap
For use on Cutler Hammer meter sockets. For use on Cutler Hammer meter sockets. Aluminum die cast. Indoor or outdoor applications. Use in an overhead service entrance. Mounts on top of EMT, Rigid or IMC conduit. Serves as a connecting point for the service entrance wires. UL Listed meets CSA requirements. Tray boxed.
Halex 29523 Insulated Metallic Grounding Conduit Bushing with Lug Arrow Hart 2131W-BOX Round Wall Plate Eaton DS900AP Rainproof Type DS Hub Adapter Kit
Zinc die cast. Rounded surface prevents damage to insulation. Thermoplastic liner rated at 150 degree F. Indoor or outdoor use. Use with locknut to terminate service conduit to a cabinet. Lug provided for bonding jumper to a neutral bus bar. UL Listed, CSA Approved. Molded from non-flammable thermoset. Flush fitting, warp resistant design. Screw-catch feature holds mounting screws captive and simplifies installation. Matching screws provided. High gloss finish is soil resistant. Standard size - 2.75" x 4.50", boxed. Small hub to large opening. Permits installation of group 1 hubs on 200 Amp type general-duty, heavy-duty and double throw switches. NEMA 3R.
Carlon E998J-CAR Service Entrance Cap Halex 09215 Compression Standard Water-Tight Connector Halex 10220 Standard Water-Tight Connector
Safe, non-conductive. To bring overhead wiring from outside into conduit run. Will not rust or corrode. For use with Schedule 40/80 non-metallic solvent weld fittings. Die cast of high strength zinc alloy. Use to secure SE/SEU cable to a metal enclosure. Use to connect UF cable to a waterproof box with a threaded hub. Die cast of high strength zinc alloy. Use to secure SE/SEU cable to a metal enclosure. Use to connect UF cable to a waterproof box with a threaded hub.
Halex 77920 Service Entrance Cap Eaton ARP00006CH2 Type A Hub Closure Plate Eaton RH150P Rainproof Type H Conduit Hub
Indoor or outdoor applications. Use in an overhead service entrance. Cap mounts on top of PVC, Rigid or IMC conduit. Serves as a connecting point for the service entrance wires. Bulk packed. For use on Cutler Hammer meter sockets. For load centers No. PL0724R and Challenger No, S3100RN; commonly used on WNB breakers.
Arrow Hart 5134 Standard Wall Plate Halex 64415 Conduit Elbow Halex 60525 Adjustable Wire Holder
Molded from non-flammable nylon. Flush-fitting, warp resistant design. Screw-catch feature holds mounting screws captive and simplifies installation. Matching screws provided. High gloss finish is soil resistant. Plate size: 4.50" x 2.75" To connect EMT conduit together to allow for 90 degree bends. UL Approved. Porcelain and steel. Used to secure the incoming service entrance wires. Mounts below the overhead service entrance cap. Tray boxed.
Siemens ECHS200 Type HS Conduit Hub Allied 101568 EMT Conduit CLC 5124 Small Mini Cell Phone Holder
For use on all Siemens loadcenters, main lug, main breaker and meter socket; plus enclosed circuit breakers Nos. WB2225, WB3225. High grade mild strip steel, hot galvanized with a process that combines zinc, a conversion coating, and a clear organic polymer top-coat to form a triple layer of protection against corrosion and abrasion, has a low friction ID coating that improves the slip properties between conduit and wire. It provides easy bending, cutting and joining while resisting flattening, kinking and splitting. Reduces electromagnetic fields, effectively shielding computers and sensitive electronic equipment from the electromagnetic interference caused by power distribution systems. UL Listed, meets ANSI C80.3. Heavy-duty clip on back, elastic side panels and padded inside to protect cell phones. Versatile 2-way attachment for belt and pants. Small size for modern phones.
Arrow Hart 5131B-BOX Wall Plate Arrow Hart 5131W-BOX Wall Plate Arrow Hart 5131V-BOX Wall Plate
Molded from non-flammable nylon. Flush fitting, warp resistant design. Screw-catch feature holds mounting screws captive and simplifies installation. Matching screws provided. High gloss finish is soil resistant. Standard size - 2.75" x 4.50", boxed. Molded from non-flammable nylon. Flush fitting, warp resistant design. Screw-catch feature holds mounting screws captive and simplifies installation. Matching screws provided. High gloss finish is soil resistant. Standard size - 2.75" x 4.50", boxed. Molded from non-flammable nylon. Flush fitting, warp resistant design. Screw-catch feature holds mounting screws captive and simplifies installation. Matching screws provided. High gloss finish is soil resistant. Standard size - 2.75" x 4.50", boxed.
Nite Ize CCSL-03-22 Clip Case Sideways Phone Case Nite Ize CCSL-03-01 Clip Case Sideways Cell Phone Cases Eaton DS200H2P Rainproof Conduit Hub
Protects from impacts, and accented with weather-resistant, rugged hypalon material, this holster is designed to keep phones safe and at-hand in a fixed horizontal position. Rugged flex-clip ensures confident attachment to waistbands, belts, or straps up to 2-1/10". Hook and loop closure. Interior pocket provides a handy place to store ID, credit cards, or cash. Designed to fit nearly all mobile phone shapes and styles on the market. Protects from impacts, and accented with weather-resistant, rugged hypalon material, this holster is designed to keep phones safe and at-hand in a fixed horizontal position. Rugged flex-clip ensures confident attachment to waistbands, belts, or straps up to 2-1/10". Hook and loop closure. Interior pocket provides a handy place to store ID, credit cards, or cash. Designed to fit nearly all mobile phone shapes and styles on the market. For use with MLO and MCB loadcenters and circuit breaker enclosures.
CLC 5124M Small Camo Cell Phone Holder