Home > ELECTRICAL > SPECIALTY ELECTRICAL > FIRE/HOME PROTECTION > ALARMS / DETECTORS - SMART
Choose a sub category:
NON METALLIC CABLE CONNECTORS BX / FLEX CONDUIT FITTINGS EMT METAL CONDUIT FITTINGS
RIGID CONDUIT FITTINGS LIQUID TIGHT CONDUIT FITTINGS METAL CONDUIT ACCESSORIES
PVC CONDUIT FITTINGS SERVICE ENTRANCE FITTINGS GROUNDING RODS/CLAMPS
PLASTIC FLEXIBLE FITTINGS CONDUIT STRAPS WASHERS / REDUCERS
METAL CONDUIT SUPPORT
Sort By:
1
Carlon E940D-CTN Standard Conduit Coupling Carlon E943D-CTN Terminal Adapter Carlon E940E-CTN/CAR Standard Conduit Coupling
Safe, non-conductive. Schedule 40 non-metallic socket type coupling for joining Schedule 40 non-metallic conduit. Will not rust or corrode. RoHS Compliance, UL Listed. Safe, non-conductive. For adapting schedule 40 non-metallic conduit to boxes, threaded fittings, metallic systems. Male threads on one end, socket end on the other. Will not rust or corrode. UL Listed, RoHS Compliance. Safe, non-conductive. Schedule 40 non-metallic socket type coupling for joining Schedule 40 non-metallic conduit. Will not rust or corrode. RoHS Compliance, UL Listed.
Carlon E942DR-CTN Conduit Adapter Carlon E942ER-CTN Conduit Adapter WALLPLATE TEL/COAX LT ALM 1G
Safe, non-conductive. For adapting Schedule 40 non-metallic conduit to boxes, threaded fittings, metallic systems. Female threads one end, socket end on the other. Will not rust or corrode. Safe, non-conductive. For adapting Schedule 40 non-metallic conduit to boxes, threaded fittings, metallic systems. Female threads one end, socket end on the other. Will not rust or corrode. Molded from non-flammable thermoset. Flush fitting, warp resistant design. Matching screws provided. High gloss finish is soil resistant. Standard size - 2.75" x 4.50".
Arrow Hart 2128V-BOX Standard Wall Plate Carlon E940FR-CTN Standard Conduit Coupling Carlon E943E-CTN Terminal Adapter
Molded from non-flammable thermoset. Flush fitting, warp resistant design. Matching screws provided. High gloss finish is soil resistant. Standard size - 2.75" x 4.50". Safe, non-conductive. Schedule 40 non-metallic socket type coupling for joining Schedule 40 non-metallic conduit. Will not rust or corrode. RoHS Compliance, UL Listed. Safe, non-conductive. For adapting schedule 40 non-metallic conduit to boxes, threaded fittings, metallic systems. Male threads on one end, socket end on the other. Will not rust or corrode. UL Listed, RoHS Compliance.
Carlon E943FR-CTN Terminal Adapter Carlon E996DR-CTN Conduit Box Adapter Carlon E940GR-CTN Standard Conduit Coupling
Safe, non-conductive. For adapting schedule 40 non-metallic conduit to boxes, threaded fittings, metallic systems. Male threads on one end, socket end on the other. Will not rust or corrode. UL Listed, RoHS Compliance. For PVC enclosures. cULus Listed. Safe, non-conductive. Schedule 40 non-metallic socket type coupling for joining Schedule 40 non-metallic conduit. Will not rust or corrode. RoHS Compliance, UL Listed.
Carlon E942FR-CTN Conduit Adapter Carlon UA9ADB-CTN Standard Radius Rigid Conduit Elbow Carlon E996ER-CTN Conduit Box Adapter
Safe, non-conductive. For adapting Schedule 40 non-metallic conduit to boxes, threaded fittings, metallic systems. Female threads one end, socket end on the other. Will not rust or corrode. For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant. Schedule 40. UL 651 Listed to the NEC by the ETL, UL Listed. For PVC enclosures. cULus Listed.
Carlon UA9ADR-CTN Standard Radius Conduit Elbow Carlon E940HR-CTN Standard Conduit Coupling Carlon E943GR-CTN Terminal Adapter
For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant. Safe, non-conductive. Schedule 40 non-metallic socket type coupling for joining Schedule 40 non-metallic conduit. Will not rust or corrode. RoHS Compliance, UL Listed. Safe, non-conductive. For adapting schedule 40 non-metallic conduit to boxes, threaded fittings, metallic systems. Male threads on one end, socket end on the other. Will not rust or corrode. UL Listed, RoHS Compliance.
Carlon UA7ADB-CTN Standard Radius Conduit Elbow Carlon UA9AER-CTN Standard Radius Conduit Elbow Halex 91211 Concrete Tight Set Screw Connector
For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant. UL Listed E35297. For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant. Zinc die cast. Use to connect EMT conduit to steel outlet box, load center or other metal enclosure. UL Approved.
Carlon UA7ADR-CAR Standard Radius Conduit Elbow Carlon E943HR-CTN Terminal Adapter Carlon UA9AEB-CTN Standard Radius Rigid Conduit Elbow
For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant. UL Listed E35297. Safe, non-conductive. For adapting schedule 40 non-metallic conduit to boxes, threaded fittings, metallic systems. Male threads on one end, socket end on the other. Will not rust or corrode. UL Listed, RoHS Compliance. For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant. Schedule 40. UL 651 Listed to the NEC by the ETL, UL Listed.
Carlon E942GR-CTN Conduit Adapter Thomas & Betts E950ED-CTN Reducing Bushing WALLPLATE PHONE/COAX LT ALM 1G
Safe, non-conductive. For adapting Schedule 40 non-metallic conduit to boxes, threaded fittings, metallic systems. Female threads one end, socket end on the other. Will not rust or corrode. For connecting different sizes of conduit. Socket both ends, for reducing male Schedule 40/80 conduit runs or fittings to female. Non-conductive. Will not rust or corrode. Molded from non-flammable Polycarbonate. Virtually unbreakable, with high structural rigidity, long-term form retention and superior impact and abrasion resistance. Screw-catch feature holds mounting screws captive and simplifies installation. Matching screws provided. High gloss finish is soil resistant. Mid-size - 3.125" x 4.875". With .375" hole.
Halex 91221 Concrete Tight Set Screw Coupling Arrow Hart PJ11V Mid Size Wall Plate Arrow Hart PJ11W Mid Size Wall Plate
Zinc die cast. Use to join two lengths of EMT conduit together. UL Approved. Molded from non-flammable Polycarbonate. Virtually unbreakable, with high structural rigidity, long-term form retention and superior impact and abrasion resistance. Screw-catch feature holds mounting screws captive and simplifies installation. Matching screws provided. High gloss finish is soil resistant. Mid-size - 3.125" x 4.875". With .375" hole. Molded from non-flammable Polycarbonate. Virtually unbreakable, with high structural rigidity, long-term form retention and superior impact and abrasion resistance. Screw-catch feature holds mounting screws captive and simplifies installation. Matching screws provided. High gloss finish is soil resistant. Mid-size - 3.125" x 4.875". With .375" hole.
Carlon UA7AER-CAR Standard Radius Conduit Elbow Carlon E940JR-CTN Standard Conduit Coupling Carlon E942HR Conduit Adapter
For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant. UL Listed E35297. Safe, non-conductive. Schedule 40 non-metallic socket type coupling for joining Schedule 40 non-metallic conduit. Will not rust or corrode. RoHS Compliance, UL Listed. Safe, non-conductive. For adapting Schedule 40 non-metallic conduit to boxes, threaded fittings, metallic systems. Female threads one end, socket end on the other. Will not rust or corrode.
Halex 91530 Combination Coupling Halex 90510 Twin Screw Clamp Connector Carlon UA7AEB-CTN Standard Radius Conduit Elbow
Zinc die cast. Use to join EMT conduit to non-metallic sheathed cable. #14/2, #12/3 or 2 #14/2. Indoor use only. With UPC. UL Approved. Fits 1/2" knockout, non-metallic cable numbers 14/2, 12/2, 12/3 AWG or 2 number 14/2 AWG or flex cord .300 to .560 inches diameter. In a dry location, use to connect nonmetallic sheathed cable to a steel outlet box or other metal enclosure. UL, Listed, meets CSA requirements. For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant. UL Listed E35297.
Halex 91212 Concrete Tight Set Screw Connector Carlon UA9AFR-CTN Standard Radius Conduit Elbow Arrow Hart PJ26 Decorative Mid Size Unbreakable Wall Plate
Zinc die cast. Use to connect EMT conduit to steel outlet box, load center or other metal enclosure. UL Approved. For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant. Molded from non-flammable Polycarbonate. Virtually unbreakable, with high structural rigidity, long-term form retention and superior impact and abrasion resistance. Screw-catch feature holds mounting screws captive and simplifies installation. Matching screws provided. High gloss finish is soil resistant. Mid-size - 3.125" x 4.875".
Arrow Hart PJ26BK Decorator Screwless Unbreakable Wall Plate Carlon E943JRR Terminal Adapter Halex 90211 Compression Connector
Molded from non-flammable Polycarbonate. Virtually unbreakable, with high structural rigidity, long-term form retention and superior impact and abrasion resistance. Screw-catch feature holds mounting screws captive and simplifies installation. Matching screws provided. High gloss finish is soil resistant. Mid-size - 3.125" x 4.875". Safe, non-conductive. For adapting schedule 40 non-metallic conduit to boxes, threaded fittings, metallic systems. Male threads on one end, socket end on the other. Will not rust or corrode. UL Listed, RoHS Compliance. Zinc die cast. Use to connect EMT conduit to steel outlet box, load center or other metal enclosure. UL Approved.
Halex 91222 Concrete Tight Set Screw Coupling Halex 96510 2-Piece Butterfly Clamp Connector Carlon E942JR Conduit Adapter
Zinc die cast. Use to join two lengths of EMT conduit together. UL Approved. Zinc die cast. In a dry location, use to secure #14 - #10 non-metallic sheathed cable to steel outlet box or other metal enclosure. No locknut required. Safe, non-conductive. For adapting Schedule 40 non-metallic conduit to boxes, threaded fittings, metallic systems. Female threads one end, socket end on the other. Will not rust or corrode.
Carlon UA7AFR-CAR Standard Radius Conduit Elbow Carlon UA9AFB-CTN Standard Radius Conduit Elbow Halex 12110 Concrete Tight Set Screw Connector
For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant. UL Listed E35297. For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant. Schedule 40. UL 651 Listed to the NEC by the ETL, UL Listed. Zinc die cast. Use to connect EMT conduit to steel outlet box, load center or other metal enclosure. UL Approved.
Halex 90512 Twin Screw Clamp Connector Carlon UA7AFB-CTN Standard Radius Conduit Elbow Thomas & Betts E994DR-CTN Conduit Offset
Fits non metallic cable, such as Romex, number 14/2 round, number 12/3-8/3 AWG or flex cord .460 to .720 inches diameter. In a dry location, use to connect nonmetallic sheathed cable to a steel outlet box or other metal enclosure. UL Listed, meets CSA requirements. For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant. UL Listed E35297. Non-conductive. Will not rust or corrode.
Halex 27511 Hit Lock Cable Connectors Halex 90221 Concrete Tight Compression Coupling Carlon E950FD-CAR Reducing Conduit Bushing
Fits NM Cable: #14/2, #14/3, #12/2, #10/2, #10/3. Snap-In, no screws or locknuts required. In a dry location, use to connect non-metallic sheathed cable to a steel outlet box or other metal enclosure. Design allows for two-step installation. Push into box and insert cable. UL Approved, CSA certified. Use to join two lengths of EMT conduit together. Zinc. UL, CSA Approved. For connecting different sizes of conduit. Socket both ends, for reducing male Schedule 40/80 conduit runs or fittings to female. Non-conductive. Will not rust or corrode.
WALLPLATE DPLX/DECO LT ALM 2G Arrow Hart PJ18V Combination Wall Plate Arrow Hart PJ18W Combination Wall Plate
Molded from non-flammable Polycarbonate. Virtually unbreakable, with high structural rigidity, long-term form retention and superior impact and abrasion resistance. Screw-catch feature holds mounting screws captive and simplifies installation. Matching screws provided. High gloss finish is soil resistant. Mid-size - 4.875" x 4.938". Virtually unbreakable, with high structural rigidity, long-term form retention and impact and abrasion resistance. Screw-catch feature holds mounting screws captive. Matching screws provided. High gloss finish is soil resistant. Mid-size - 4.875" x 4.938". Virtually unbreakable, with high structural rigidity, long-term form retention and impact and abrasion resistance. Screw-catch feature holds mounting screws captive. Matching screws provided. High gloss finish is soil resistant. Mid-size - 4.875" x 4.938".
Arrow Hart PJ126 Combination Decorative Mid Size Wall Plate Arrow Hart PJ126 Combination Decorative Mid Size Wall Plate Halex 90212 Concrete Tight Rain Tight Compression Connector
Molded from non-flammable Polycarbonate. Virtually unbreakable, with high structural rigidity, long-term form retention and superior impact and abrasion resistance. Screw-catch feature holds mounting screws captive. Matching screws provided. High gloss finish is soil resistant. Mid-size - 4.875" x 4.938". Molded from non-flammable Polycarbonate. Virtually unbreakable, with high structural rigidity, long-term form retention and superior impact and abrasion resistance. Screw-catch feature holds mounting screws captive. Matching screws provided. High gloss finish is soil resistant. Mid-size - 4.875" x 4.938". Zinc die cast. Use to connect EMT conduit to steel outlet box, load center or other metal enclosure. UL Approved.
Carlon UA9AGR-CTN Standard Radius Conduit Elbow Halex 12210B Concrete Tight Set Screw Coupling Despard K1I 1-Hole Standard Wall Plate
For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant. Zinc die cast. Use to join two lengths of EMT conduit together. UL Approved. Switch plate with horizontal one opening, two opening and three opening sizes. Older style device with a rounded shape that is slightly flattened top and bottom. Interchangeable, supplied with mounting straps. Flexible, smaller than a standard duplex receptacle device, fits in a smaller opening. Used in locations with limited space or restricted options. Openings are 11/16" high x 29/32" wide. UL Listed, CSA Certified.
Despard K3I 3-Hole Standard Wall Plate Despard K2I 2-Hole Standard Wall Plate Carlon UA7AGR-CAR Standard Radius Conduit Elbow
Switch plate with horizontal one opening, two opening and three opening sizes. Older style device with a rounded shape that is slightly flattened top and bottom. Interchangeable, supplied with mounting straps. Flexible, smaller than a standard duplex receptacle device, fits in a smaller opening. Used in locations with limited space or restricted options. Openings are 11/16" high x 29/32" wide. UL Listed, CSA Certified. Switch plate with horizontal one opening, two opening and three opening sizes. Older style device with a rounded shape that is slightly flattened top and bottom. Interchangeable, supplied with mounting straps. Flexible, smaller than a standard duplex receptacle device, fits in a smaller opening. Used in locations with limited space or restricted options. Openings are 11/16" high x 29/32" wide. UL Listed, CSA Certified. For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant. UL Listed E35297.
Carlon E940K-CTN Conduit Coupling Halex 90513 Twin Screw Clamp Connector Halex 90222 Concrete Tight Compression Coupling
Safe, non-conductive. Schedule 40 non-metallic socket type coupling for joining Schedule 40 non-metallic conduit. Will not rust or corrode. RoHS Compliance, UL Listed. Fits non metallic cable number 14/2 to number 6/3 AWG or number 3/10/3 AWG or flex cord .450 to .730 inches diameter. With a 1/2" knockout. In a dry location, use to connect nonmetallic sheathed cable to a steel outlet box or other metal enclosure. UL Listed, meets CSA requirements. Use to join two lengths of EMT conduit together. Zinc. UL, CSA Approved.
Halex 20511 Twin Screw Clamp Connector Arrow Hart PJ262BK Decorator Wall Plate Arrow Hart PJ263 Decorative Mid Size Unbreakable Wall Plate
Fits 1/2" knockout, non-metallic cable numbers 14/2, 12/2, 12/3 AWG or 2 number 14/2 AWG or flex cord .300 to .560 inches diameter. In a dry location, use to connect nonmetallic sheathed cable to a steel outlet box or other metal enclosure. UL, Listed, meets CSA requirements. Molded from non-flammable Polycarbonate. Virtually unbreakable, with high structural rigidity, long-term form retention and superior impact and abrasion resistance. Screw-catch feature holds mounting screws captive. Matching screws provided. High gloss finish is soil resistant. Mid-size - 4.875" x 4.938". Molded from non-flammable Polycarbonate. Virtually unbreakable, with high structural rigidity, long-term form retention and impact and abrasion resistance. Screw-catch feature holds mounting screws captive. Matching screws provided. High gloss finish is soil resistant. Mid-size - 4.875" x 6.75".
Arrow Hart PJ262 Decorative Mid Size Unbreakable Wall Plate Arrow Hart PJ262 Decorative Mid Size Unbreakable Wall Plate Arrow Hart PJ263 Decorative Mid Size Unbreakable Wall Plate
Molded from non-flammable Polycarbonate. Virtually unbreakable, with high structural rigidity, long-term form retention and superior impact and abrasion resistance. Screw-catch feature holds mounting screws captive. Matching screws provided. High gloss finish is soil resistant. Mid-size - 4.875" x 4.938". Molded from non-flammable Polycarbonate. Virtually unbreakable, with high structural rigidity, long-term form retention and superior impact and abrasion resistance. Screw-catch feature holds mounting screws captive. Matching screws provided. High gloss finish is soil resistant. Mid-size - 4.875" x 4.938". Molded from non-flammable Polycarbonate. Virtually unbreakable, with high structural rigidity, long-term form retention and impact and abrasion resistance. Screw-catch feature holds mounting screws captive. Matching screws provided. High gloss finish is soil resistant. Mid-size - 4.875" x 6.75".
Thomas & Betts E950FE-CTN Reducing Bushing Halex 03705B Concrete Tight Set Screw Conduit Offset Halex 90371 Concrete Tight Set Screw Conduit Offset
For connecting different sizes of conduit. Socket both ends, for reducing male Schedule 40/80 conduit runs or fittings to female. Non-conductive. Will not rust or corrode. Zinc die cast. Use to connect EMT conduit to a metal outlet box or enclosure where an offset is desired. UL Approved. Zinc die cast. Use to connect EMT conduit to a metal outlet box or enclosure where an offset is desired. UL Approved.
Carlon E943K-CTN Terminal Adapter Carlon UA7AGB-CAR Standard Radius Conduit Elbow Carlon LN43DA-CTN Liquidtight Straight Angle Conduit Connector
Safe, non-conductive. For adapting schedule 40 non-metallic conduit to boxes, threaded fittings, metallic systems. Male threads on one end, socket end on the other. Will not rust or corrode. UL Listed, RoHS Compliance. For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant. UL Listed E35297. For flexible conduit. Non-metallic/non-conductive, corrosion resistant plastic.
Halex 90514 Twin Screw Clamp Connector Thomas & Betts E994ER-CTN Conduit Offset Carlon UA9AH-CAR Standard Radius Conduit Elbow
Fits non metallic cable number 6/3 to number 2/3 AWG flex cord .800 to 1.350 inches diameter or SE cable 3 conductor or 3 number 1/0 minimum; 3 conductor or 3 number 2/0 maximum. With 1/2" knockout. In a dry location, use to connect nonmetallic sheathed cable to a steel outlet box or other metal enclosure. UL Listed, meets CSA requirements. Non-conductive. Will not rust or corrode. For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant.
Carlon UA7AHR-CTN Standard Radius Conduit Elbow Carlon E985D-CTN Rigid Conduit Body Carlon E984D-CTN Rigid Conduit Body
For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant. UL Listed E35297. For easy access and pulling of wires through conduit run. Textured lid, foam-in-place gasket. For use with Schedule 40/80 non-metallic solvent weld fittings. Will not rust or corrode. For easy access and pulling of wires through conduit run. For use with Schedule 40/80 non-metallic solvent weld fittings. Will not rust or corrode.
Halex 02110 Compression Connector Halex 90401 Offset Nipple Arrow Hart STC26V Decorative Mid Size Wall Plate
Zinc die cast. Use to connect EMT conduit to steel outlet box, load center or other metal enclosure. UL Approved. Zinc die cast. Use as an offset connector between two enclosures. Offsets the axis of the raceway 3/4". UL Approved. Center plate. High gloss finish. Thermoplastic construction for durability and flexibility. Easy to snap together and lock. Mid-size design to fit over most existing wall openings. Screw-Catch feature holds already attached mounting screws captive for easy installation. Screws are slotted steel, baked enamel and painted. Meets current Federal specifications as tested to UL 514 (file no. E33216). Meets CSA standard C22.2, No. 42.1, (file no.9294). NEMA WD-1, WD-6. Meets flammability requirements per UL 94, V2 rated. Temperature rating -40 degrees C to 70 degrees C.
WALL PLT SECT END DECR MID WHT WALLPLATE SECT END DECR MID IV Arrow Hart STC26W Decorative Mid Size Wall Plate
End plate. High gloss finish. Thermoplastic construction for durability and flexibility. Easy to snap together and lock. Mid-size design to fit over most existing wall openings. Screw-Catch feature holds already attached mounting screws captive for easy installation. Screws are slotted steel, baked enamel and painted. Meets current Federal specifications as tested to UL 514 (file no. E33216). Meets CSA standard C22.2, No. 42.1, (file no.9294). NEMA WD-1, WD-6. Meets flammability requirements per UL 94, V2 rated. Temperature rating -40 degrees C to 70 degrees C. End plate. High gloss finish. Thermoplastic construction for durability and flexibility. Easy to snap together and lock. Mid-size design to fit over most existing wall openings. Screw-Catch feature holds already attached mounting screws captive for easy installation. Screws are slotted steel, baked enamel and painted. Meets current Federal specifications as tested to UL 514 (file no. E33216). Meets CSA standard C22.2, No. 42.1, (file no.9294). NEMA WD-1, WD-6. Meets flammability requirements per UL 94, V2 rated. Temperature rating -40 degrees C to 70 degrees C. Center plate. High gloss finish. Thermoplastic construction for durability and flexibility. Easy to snap together and lock. Mid-size design to fit over most existing wall openings. Screw-Catch feature holds already attached mounting screws captive for easy installation. Screws are slotted steel, baked enamel and painted. Meets current Federal specifications as tested to UL 514 (file no. E33216). Meets CSA standard C22.2, No. 42.1, (file no.9294). NEMA WD-1, WD-6. Meets flammability requirements per UL 94, V2 rated. Temperature rating -40 degrees C to 70 degrees C.
Carlon UB9AD-CAR Standard Radius Conduit Elbow Thomas & Betts E986D-CTN Type LB Rigid/IMC Conduit Body Carlon E940LR/CTN Conduit Coupling
For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant. Rigid non-metallic Type LB conduit body. For easy access and pulling of wires through conduit run. For use with Schedule 40 non-metallic solvent weld fittings. Will not rust or corrode. With textured lid and foam-in-place gasket. Hubs are not threaded. UL Listed, RoHS Compliance. Safe, non-conductive. Schedule 40 non-metallic socket type coupling for joining Schedule 40 non-metallic conduit. Will not rust or corrode. RoHS Compliance, UL Listed.
Halex 12112 Concrete Tight Set Screw Connector Halex 21210 Concrete Tight Set Screw Connector Carlon E950GE-CAR Reducing Conduit Bushing
Zinc die cast. Use to connect EMT conduit to steel outlet box, load center or other metal enclosure. UL Approved. Zinc die cast. Use to connect EMT conduit to steel outlet box, load center or other metal enclosure. UL Approved. For connecting different sizes of conduit. Socket both ends, for reducing male Schedule 40/80 conduit runs or fittings to female. Non-conductive. Will not rust or corrode.
Carlon LN43EA-CTN Liquidtight Straight Angle Conduit Connector Thomas & Betts E950GF-CTN Reducing Bushing Halex 03707B Concrete Tight Set Screw Conduit Offset
For flexible conduit. Non-metallic/non-conductive, corrosion resistant plastic. For connecting different sizes of conduit. Socket both ends, for reducing male Schedule 40/80 conduit runs or fittings to female. Non-conductive. Will not rust or corrode. Zinc die cast. Use to connect EMT conduit to a metal outlet box or enclosure where an offset is desired. UL Approved.
Carlon UA9AGB-CTN Standard Radius Conduit Elbow Halex 12212 Concrete Tight Set Screw Coupling Carlon E987D-CTN Rigid Conduit Body
For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant. Schedule 40. UL 651 Listed to the NEC by the ETL, UL Listed. Zinc die cast. Use to join two lengths of EMT conduit together. UL Approved. For easy access and pulling of wires through conduit run. For use with Schedule 40/80 non-metallic solvent weld fittings. Will not rust or corrode. UL Listed.
Mediasync 3532-4W Standard Telephone Wall Jack Mediasync 3532-4V Standard Telephone Wall Jack Halex 02210 Concrete Tight Compression Coupling
Spring wire contacts, 0.018" diameter with gold plating over nickel to maximize contact life and reduce corrosion. High impact thermoplastic meets UL 94V-O Flame Retardency Rating as well as UL 1863 and FCC Part 68 requirements. Boxed. Spring wire contacts, 0.018" diameter with gold plating over nickel to maximize contact life and reduce corrosion. High impact thermoplastic meets UL 94V-O Flame Retardency Rating as well as UL 1863 and FCC Part 68 requirements. Boxed. Use to join two lengths of EMT conduit together. Zinc. UL, CSA Approved.
Carlon UA7AHB-CAR Standard Radius Conduit Elbow Carlon E983D-CTN Rigid IMC Conduit Body AmerTac 935RW Wall Plate
For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant. UL Listed E35297. For easy access and pulling of wires through conduit run. For use with Schedule 40/80 non-metallic solvent weld fittings. Will not rust or corrode. With screws. 5" height x 2-3/4" width x 1/4" depth.
AmerTac 935RAL Wall Plate Thomas & Betts E950HGR Reducing Bushing WALLPLATE 2-TOG/DPLX LT ALM 3G
With screws. 5" height x 2-3/4" width x 1/4" depth. For connecting different sizes of conduit. Socket both ends, for reducing male Schedule 40/80 conduit runs or fittings to female. Non-conductive. Will not rust or corrode. Molded from non-flammable Polycarbonate. Virtually unbreakable, with high structural rigidity, long-term form retention and superior impact and abrasion resistance. Screw-catch feature holds mounting screws captive and simplifies installation. Matching screws provided. High gloss finish is soil resistant. Mid-size - 4.875" x 6.75".
Carlon Carflex LN20DA-CTN Liquidtight Conduit Elbow Arrow Hart PJ28 Combination Mid Size Wall Plate Halex 90372 Concrete Tight Set Screw Conduit Offset
For flexible conduit. Non-metallic, Non-conductive, corrosion resistant plastic. Molded from non-flammable Polycarbonate. Virtually unbreakable, with high structural rigidity, long-term form retention and superior impact and abrasion resistance. Screw-catch feature holds mounting screws captive and simplifies installation. Matching screws provided. High gloss finish is soil resistant. Mid-size - 4.875" x 6.75". Zinc die cast. Use to connect EMT conduit to a metal outlet box or enclosure where an offset is desired. UL Approved.
Carlon UA9AHB-CTN Standard Radius Rigid Conduit Elbow Halex Straight Liquid Tight Connector Carlon E942K-CAR Conduit Adapter
For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant. Schedule 40. UL 651 Listed to the NEC by the ETL, UL Listed. Fitting will not rust or corrode. No disassembly required. Reusable, hand tightened nut. Use to connect type B non-metallic liquid-tight conduit to a weatherproof outlet box, pool/spa equipment motor, central air conditioning unit or various other electrical enclosures or hubs. UL Approved. Safe, non-conductive. For adapting Schedule 40 non-metallic conduit to boxes, threaded fittings, metallic systems. Female threads one end, socket end on the other. Will not rust or corrode.
Carlon E943L-CAR Terminal Adapter Carlon UB9AE-CAR Standard Radius Conduit Elbow Carlon E950JHR Reducing Conduit Bushing
Safe, non-conductive. For adapting schedule 40 non-metallic conduit to boxes, threaded fittings, metallic systems. Male threads on one end, socket end on the other. Will not rust or corrode. UL Listed, RoHS Compliance. For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant. For connecting different sizes of conduit. Socket both ends, for reducing male Schedule 40/80 conduit runs or fittings to female. Non-conductive. Will not rust or corrode.
Halex 91625 Multi-Piece Liquid Tight Compression Connector Halex 02905B Compression Conduit Elbow Halex 27519 Hit Lock Cable Connectors
Zinc die cast. Use to connect liquid-tight conduit to a steel outlet box, metal enclosure or hub. UL Approved. Zinc die cast. Concrete-tight. Indoor or outdoor applications. Use to connect EMT conduit to a metal outlet box or enclosure where a 90 degree bend is required and a pipe bending tool is not used. UL, CSA Listed. Fits NM Cable: #14/2, #14/3, #12/2, #10/2, #10/3. Snap-In, no screws or locknuts required. In a dry location, use to connect non-metallic sheathed cable to a steel outlet box or other metal enclosure. Design allows for two-step installation. Push into box and insert cable. UL Approved, CSA certified.
Halex 16205B Multi-Piece Liquid Tight Conduit Connector Halex 27621 Multi-Piece Liquid Tight Straight Conduit Connector Halex 90402 Offset Nipple
Multi-piece. Zinc die cast. Use to connect liquid-tight conduit to a steel outlet box or other metal enclosure or hub. UL Listed. Bulk packed. Fitting will not rust or corrode. No disassembly required. Reusable, hand tightened nut. Use to connect type B non-metallic liquid-tight conduit to a weatherproof outlet box, pool/spa equipment motor, central air conditioning unit or various other electrical enclosures or hubs. UL Approved. Zinc die cast. Use as an offset connector between two enclosures. Offsets the axis of the raceway 3/4". UL Approved.
Carlon Carflex LN20EA-CTN Liquidtight Conduit Elbow Carlon E983E-CTN Rigid IMC Conduit Body Carlon UB9AF-CAR Standard Radius Conduit Elbow
For flexible conduit. Non-metallic, Non-conductive, corrosion resistant plastic. For easy access and pulling of wires through conduit run. For use with Schedule 40/80 non-metallic solvent weld fittings. Will not rust or corrode. For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant.
Thomas & Betts E986E-CTN Type LB Rigid/IMC Conduit Body Halex 12215 Concrete Tight Set Screw Coupling Aspire 9521 Decorative Mid Size Screwless Wall Plate
Rigid non-metallic Type LB conduit body. For easy access and pulling of wires through conduit run. For use with Schedule 40 non-metallic solvent weld fittings. Will not rust or corrode. With textured lid and foam-in-place gasket. Hubs are not threaded. UL Listed, RoHS Compliance. Zinc die cast. Use to join two lengths of EMT conduit together. UL Approved. Screwless mid-size wall plates are virtually unbreakable and present a clean, minimalist look that can be changed in seconds. Easy installation, simply screw the mounting plate onto the wiring device and press into place. Mid-size.
Aspire 9521 Decorative Mid Size Screwless Wall Plate Aspire 9521 Decorative Mid Size Screwless Wall Plate Carlon E985E-CTN Rigid Conduit Body
Screwless mid-size wall plates are virtually unbreakable and present a clean, minimalist look that can be changed in seconds. Easy installation, simply screw the mounting plate onto the wiring device and press into place. Mid-size. Screwless mid-size wall plates are virtually unbreakable and present a clean, minimalist look that can be changed in seconds. Easy installation, simply screw the mounting plate onto the wiring device and press into place. Mid-size. For easy access and pulling of wires through conduit run. Textured lid, foam-in-place gasket. For use with Schedule 40/80 non-metallic solvent weld fittings. Will not rust or corrode.
Carlon E984E-CTN Rigid Conduit Body Thomas & Betts E986F-CTN Type LB Rigid/IMC Conduit Body Halex 14405 Pull Conduit Elbow
For easy access and pulling of wires through conduit run. For use with Schedule 40/80 non-metallic solvent weld fittings. Will not rust or corrode. Rigid non-metallic Type LB conduit body. For easy access and pulling of wires through conduit run. For use with Schedule 40 non-metallic solvent weld fittings. Will not rust or corrode. With textured lid and foam-in-place gasket. Hubs are not threaded. UL Listed, RoHS Compliance. Zinc die cast. Removable steel cover facilitates wire pulling. Use to connect EMT conduit together at a 90 degree bend. Tray box.
Carlon UA7AJ-CAR Standard Radius Conduit Elbow Halex 05115 Twin Screw Clamp Connector Halex 12115 Concrete Tight Set Screw Connector
For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant. UL Listed E35297. Fits non metallic cable, flex cords, multi flex cords; fitting range .834 - 1.520 inches diameter SE cables 2 conductor 4/0. With 1/2" knockout. In a dry location, use to connect nonmetallic sheathed cable to a steel outlet box or other metal enclosure. UL Listed, meets CSA requirements. Tray boxed. Zinc die cast. Use to connect EMT conduit to steel outlet box, load center or other metal enclosure. UL Approved.
AmerTac 935TAL Wall Plate AmerTac 935TW Rectangular Wall Plate Zenith TS1001CW In-Line Coupler
With screws. 5" height x 2-3/4" width x 1/4" depth. With screws. 5" height x 2-3/4" width x 1/4" depth. Connects two modular line cords. .87" height x 1.37" width x 0.5" depth.
Halex 02112 Compression Connector Carlon E983FR-CTN Rigid IMC Conduit Body Carlon E987E-CTN Rigid Conduit Body
Zinc die cast. Use to connect EMT conduit to steel outlet box, load center or other metal enclosure. UL Approved. For easy access and pulling of wires through conduit run. For use with Schedule 40/80 non-metallic solvent weld fittings. Will not rust or corrode. For easy access and pulling of wires through conduit run. For use with Schedule 40/80 non-metallic solvent weld fittings. Will not rust or corrode. UL Listed.
Carlon UA7AJB-CAR Standard Radius Conduit Elbow Halex 90292 Concrete Tight Compression Short Radius Conduit Elbow Halex 90291 Concrete Tight Compression Short Radius Conduit Elbow
For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant. UL Listed E35297. Zinc die cast. Concrete-tight. Indoor or outdoor applications. Use to connect EMT conduit to a metal outlet box or enclosure where a 90 degree bend is required and a pipe bending tool is not used. UL, CSA Listed. Zinc die cast. Concrete-tight. Indoor or outdoor applications. Use to connect EMT conduit to a metal outlet box or enclosure where a 90 degree bend is required and a pipe bending tool is not used. UL, CSA Listed.
Carlon E942L-CAR Conduit Adapter Carlon E990DR-CAR Access Pull Standard Radius Conduit Elbow Halex 21212 Concrete Tight Set Screw Connector
Safe, non-conductive. For adapting Schedule 40 non-metallic conduit to boxes, threaded fittings, metallic systems. Female threads one end, socket end on the other. Will not rust or corrode. Access pull point for cable in tight radius. Allows conduit changes in direction. Won't rust or corrode. Gasket included. Zinc die cast. Use to connect EMT conduit to steel outlet box, load center or other metal enclosure. UL Approved.
Carlon UA9AJ-CAR Standard Radius Conduit Elbow Carlon UA9AJB-CAR Standard Radius Conduit Elbow Zenith TS1001SPJ2W 2-Way Duplex Telephone Splitter
For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant. For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant. Schedule 40. UL 651 Listed to the NEC by the ETL, UL Listed. Split one connection into two. Four conductor construction. Allows for up to three different phone lines. .75" height x 1" width x 1.5" depth.
Arrow Hart PJS26 Decorative Screwless Wall Plate Arrow Hart PJS26 Decorative Screwless Wall Plate Halex 02212 Concrete Tight Compression Coupling
Screwless mid-size wall plate, virtually unbreakable and present a clean, minimalist look that can be changed in seconds. Easy installation, simply screw the mounting plate onto the wiring device and press into place. 4.875" x 3.125". Screwless mid-size wall plate, virtually unbreakable and present a clean, minimalist look that can be changed in seconds. Easy installation, simply screw the mounting plate onto the wiring device and press into place. 4.875" x 3.125". Use to join two lengths of EMT conduit together. Zinc. UL, CSA Approved.
Halex 26512 2-Piece Butterfly Clamp Connector Carlon E987F-CAR Rigid Conduit Body Amerelle Century 1-Rocker 1-Toggle Wall Plate
Zinc die cast. In a dry location, use to secure #14 - #10 non-metallic sheathed cable to steel outlet box or other metal enclosure. No locknut required. For easy access and pulling of wires through conduit run. For use with Schedule 40/80 non-metallic solvent weld fittings. Will not rust or corrode. UL Listed. Amerelle Wall Plate, 1-Rocker, 1-Toggle, Series: Century, 4-15/16 in Length, 4-9/16 in Width, 2 Gangs, Stamped Steel, Brushed Nickel, Screw Mounting, Includes: Matching Screws, UL Listed
Halex 12120 Concrete Tight Set Screw Connector Halex 27622 Multi-Piece Liquid Tight Straight Conduit Connector Halex 14407 Pull Conduit Elbow
Zinc die cast. Use to connect EMT conduit to steel outlet box, load center or other metal enclosure. UL Approved. Fitting will not rust or corrode. No disassembly required. Reusable, hand tightened nut. Use to connect type B non-metallic liquid-tight conduit to a weatherproof outlet box, pool/spa equipment motor, central air conditioning unit or various other electrical enclosures or hubs. UL Approved. Zinc die cast. Removable steel cover facilitates wire pulling. Use to connect EMT conduit together at a 90 degree bend. Tray box.
Zenith TS1001SPJ3W Duplex Telephone Splitter Carlon E990ER-CAR Access Pull Standard Radius Conduit Elbow Halex 12220 Concrete Tight Set Screw Coupling
Split one connection into three. Four conductor construction. Allows for up to three different phone lines. .75" height x 1.5" width x 1.5" depth. Access pull point for cable in tight radius. Allows conduit changes in direction. Won't rust or corrode. Gasket included. Zinc die cast. Use to join two lengths of EMT conduit together. UL Approved.
Carlon UB9AG-CAR Standard Radius Conduit Elbow Zenith TM1001SMSMW Small Wall Jack Thomas & Betts E986GR Type LB Rigid/IMC Conduit Body
For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant. Small surface mount wall jack, 4 wire. 2" height x 1.25" width x 0.75" depth. Rigid non-metallic Type LB conduit body. For easy access and pulling of wires through conduit run. For use with Schedule 40 non-metallic solvent weld fittings. Will not rust or corrode. With textured lid and foam-in-place gasket. Hubs are not threaded. UL Listed, RoHS Compliance.
Halex Liquid Tight Connector WALLPLATE 2-TOG/DECO LT ALM 3G Halex 27691 Liquid Tight Conduit Elbow
Indoors or outdoors, fitting will not rust or corrode. No disassembly required, just hand-tighten nut. Reusable. Use to connect type B non-metallic liquid-tight conduit to a weatherproof outlet box, pool/spa equipment motor, central air conditioning unit or various other electrical enclosures or hubs. UL Approved. Virtually unbreakable polycarbonate construction, high structural rigidity, long-term form retention. 0.375" longer and wider on all sides than standard to cover large wallboard openings, assures NEC-required gap  coverage for most wallboard-to-box openings. Screw-catch feature holds color-matched plate mounting screws captive for ease of installation. Superior abrasion and impact resistance. Temperature rating of -40 to 65 degrees C. Meets flammability requirements per UL 94, V2 rated. UL 514D and cUL Listed. Meets all CSA requirements. Mid-size - 4.875" x 6.75". Indoors or outdoors, fitting will not rust or corrode. No disassembly required, just hand-tighten nut. Reusable. Use to connect type B non-metallic liquid-tight conduit to a weatherproof outlet box, pool/spa equipment motor, central air conditioning unit or various other electrical enclosures or hubs. UL Approved.
Arrow Hart PJ226 Combination Decorative Mid Size Wall Plate Arrow Hart PJ226 Combination Decorative Mid Size Wall Plate Halex 16207B Multi-Piece Liquid Tight Conduit Connector
Virtually unbreakable polycarbonate construction, high structural rigidity, long-term form retention. 0.375" longer and wider on all sides than standard to cover large wallboard openings, assures NEC-required gap  coverage for most wallboard-to-box openings. Screw-catch feature holds color-matched plate mounting screws captive for ease of installation. Superior abrasion and impact resistance. Temperature rating of -40 to 65 degrees C. Meets flammability requirements per UL 94, V2 rated. UL 514D and cUL Listed. Meets all CSA requirements. Mid-size - 4.875" x 6.75". Virtually unbreakable polycarbonate construction, high structural rigidity, long-term form retention. 0.375" longer and wider on all sides than standard to cover large wallboard openings, assures NEC-required gap  coverage for most wallboard-to-box openings. Screw-catch feature holds color-matched plate mounting screws captive for ease of installation. Superior abrasion and impact resistance. Temperature rating of -40 to 65 degrees C. Meets flammability requirements per UL 94, V2 rated. UL 514D and cUL Listed. Meets all CSA requirements. Mid-size - 4.875" x 6.75". Multi-piece. Zinc die cast. Use to connect liquid-tight conduit to a steel outlet box or other metal enclosure or hub. UL Listed. Bulk packed.
Halex 05120 Twin Screw Clamp Connector Halex 20510 Twin Screw Clamp Connector Atron 163TBR Square Corner Traditional Wall Plate
Fits non metallic cable, flex cords, multi flex cords fitting range 1.085 - 1.520 inches diameter. With 1/2" knockout. In a dry location, use to connect nonmetallic sheathed cable to a steel outlet box or other metal enclosure. UL Listed, meets CSA requirements. Tray boxed. Fits 1/2" knockout, non-metallic cable numbers 14/2, 12/2, 12/3 AWG or 2 number 14/2 AWG or flex cord .300 to .560 inches diameter. In a dry location, use to connect nonmetallic sheathed cable to a steel outlet box or other metal enclosure. UL, Listed, meets CSA requirements. Traditional square corner design. With screws.
AmerTac Amerelle Traditional 161RR Square Corner Wall Plate AmerTac 161T Wall Plate AmerTac Traditional 161R Decorative Square Corner Wall Plate
Traditional square corner design. With screws. 5" height x 4-5/8" width x 1/4" depth. Traditional square corner design. With screws. 5" height x 2-7/8" width x 1/4" depth. Traditional square corner design. With screws. 5" height x 2-7/8" width x 1/4" depth.
AmerTac Traditional 163RBR Decorative Square Corner Wall Plate Carlon E990DER-CAR Pull Elbow With Reducer Bushing Halex 02115 Compression Connector
Traditional square corner design. With screws. Access pull point for cable in tight radius. Allows conduit changes in direction. Won't rust or corrode. Gasket included. Zinc die cast. Use to connect EMT conduit to steel outlet box, load center or other metal enclosure. UL Approved.
Halex 91627 Multi-Piece Liquid Tight Conduit Connector Halex 20210 Concrete Tight Compression Connector Arrow Hart PJ264 Decorative Mid Size Unbreakable Wall Plate
Zinc die cast. Use to connect liquid-tight conduit to a steel outlet box, metal enclosure or hub. UL Approved. Zinc die cast. Use to connect EMT conduit to steel outlet box, load center or other metal enclosure. UL Approved. Molded from non-flammable Polycarbonate. Virtually unbreakable, with high structural rigidity, long-term form retention and superior impact and abrasion resistance. Screw-catch feature holds mounting screws captive and simplifies installation. Matching screws provided. High gloss finish is soil resistant. Mid-size - 4.875" x 8.563".
Claro Maestro CW Rectangular Screwless Seamless Wall Plate Zenith TW1001SW Single Wall Jack Halex 21222 Concrete Tight Set Screw Coupling
Designed to match designer opening dimmers, sensors, fan controls, switches and accessories. Clean appearance with no visible screws. Mounts flush to the wall. Oversized to hide gaps around wallboxes. Snap-on design attaches securely and snugly in place regardless of wall condition. Connects phone wire through a wall. 4.5" height x 2.75" width x .75" depth. Zinc die cast. Use to join two lengths of EMT conduit together. UL Approved.
Halex 20512 Twin Screw Clamp Connector AmerTac 935TTW Wall Plate AmerTac Zenith TL1007W Telephone Cord
Fits non metallic cable, such as Romex, number 14/2 round, number 12/3-8/3 AWG or flex cord .460 to .720 inches diameter. In a dry location, use to connect nonmetallic sheathed cable to a steel outlet box or other metal enclosure. UL Listed, meets CSA requirements. With screws. 5" height x 4-5/8" width x 1/4" depth. Connects phone or modem to phone outlet.
Halex 14605 Inside Corner Pull Conduit Elbow Halex 21211 Concrete Tight Set Screw Connector AmerTac Zenith TL1012W Telephone Cord
Zinc die-cast. Removable steel cover facilitates wire pulling. Use to connect EMT conduit together at an inside corner. UL listed, CSA Approved. Tray boxed. Zinc die cast. Use to connect EMT conduit to steel outlet box, load center or other metal enclosure. UL Approved. Connects phone or modem to phone outlet.
Carlon UAFAD Flexible Conduit Elbow Amerelle Century 1-Toggle Wall Plate Amerelle Century 1-Rocker Wall Plate
Made of a highly durable plastic (PVC) compound making the product nonmetallic and safe to install. Elbow is non-corrosive, rustproof, and easily pliable. Good for those applications that requires change of direction. UL listed. Amerelle Wall Plate, 1-Toggle, Series: Century, 4-15/16 in Length, 4-9/16 in Width, 1 Gangs, Stamped Steel, Brushed Nickel, Screw Mounting, Includes: Matching Screws, UL Listed Amerelle Wall Plate, 1-Rocker, Series: Century, 4-15/16 in Length, 2-7/8 in Width, 1 Gangs, Stamped Steel, Brushed Nickel, Screw Mounting, Includes: Matching Screws, UL Listed
American Tack and Hdwe TW1002CPW Zenith Telephone Wall Jacks Arrow Hart PJS262 Decorative Screwless Wall Plate Arrow Hart PJS262 Decorative Screwless Wall Plate
Connects phone wire and coax cable through a wall. 4.5" height x 2.75" width x 1" depth. Screwless mid-size wall plates are virtually unbreakable and present a clean, minimalist look that can be changed in seconds. Easy installation, simply screw the mounting plate onto the wiring device and press into place. Screwless mid-size wall plates are virtually unbreakable and present a clean, minimalist look that can be changed in seconds. Easy installation, simply screw the mounting plate onto the wiring device and press into place.
WALLPLATE SCREWLESS DECO 2G   Carlon Carflex LN43FA-CAR 1-Piece Straight Conduit Connector Halex 16905B Multi-Piece Liquid Tight Conduit Elbow
Screwless mid-size wall plates are virtually unbreakable and present a clean, minimalist look that can be changed in seconds. Easy installation, simply screw the mounting plate onto the wiring device and press into place. For flexible conduit. Non-metallic/non-conductive, corrosion resistant plastic. Multi-piece, zinc die cast. Use to connect liquid-tight conduit to a steel outlet box or other metal enclosure or hub. UL Listed.