Home > ELECTRICAL > SPECIALTY ELECTRICAL > FIRE/HOME PROTECTION > MISC ALARMS / DETECTORS
Choose a sub category:
EMT FITTINGS - COMPRESSION EMT FITTINGS - COMPRESSION NON METALLIC CABLE CONNECTORS
BX / FLEX CONDUIT FITTINGS EMT FITTINGS - SET SCREW EMT FITTINGS - SET SCREW
EMT FITTINGS - RAIN TIGHT EMT FITTINGS - RAIN TIGHT EMT METAL CONDUIT FITTINGS
RIGID CONDUIT FITTINGS LIQUID TIGHT CONDUIT FITTINGS METAL CONDUIT ACCESSORIES
PVC CONDUIT FITTINGS SERVICE ENTRANCE FITTINGS GROUNDING RODS/CLAMPS
PLASTIC FLEXIBLE FITTINGS CONDUIT STRAPS WASHERS / REDUCERS
METAL CONDUIT SUPPORT
Sort By:
1
Halex 97521 Insulated Conduit Bushing Arrow Hart 2131 Standard Wall Plate Arrow Hart 2131V-BOX Round Wall Plate
High impact thermoplastic. Flame retardant to 105 degrees C. Use with locknut to terminate threaded Rigid or IMC conduit to an outlet box. The rounded surface of the bushing prevents damage to wire insulation. Required by the NEC. UL Listed, CSA Approved. Molded from non-flammable thermoset. Flush fitting, warp resistant design. Screw-catch feature holds mounting screws captive and simplifies installation. Matching screws provided. High gloss finish is soil resistant. Standard size - 2.75" x 4.50", boxed. Molded from non-flammable thermoset. Flush fitting, warp resistant design. Screw-catch feature holds mounting screws captive and simplifies installation. Matching screws provided. High gloss finish is soil resistant. Standard size - 2.75" x 4.50", boxed.
Halex 97522 Insulated Conduit Bushing Arrow Hart 2151W-BOX Decorator Wall Plate Halex 97525 Insulated Conduit Bushing
High impact thermoplastic. Flame retardant to 105 degrees C. Use with locknut to terminate threaded Rigid or IMC conduit to an outlet box. The rounded surface of the bushing prevents damage to wire insulation. Required by the NEC. UL Listed, CSA Approved. Molded from non-flammable thermoset. Flush fitting, warp resistant design. Matching screws provided. High gloss finish is soil resistant. Standard size - 2.75" x 4.50", boxed. High impact thermoplastic. Flame retardant to 105 degrees C. Use with locknut to terminate threaded Rigid or IMC conduit to an outlet box. The rounded surface of the bushing prevents damage to wire insulation. Required by the NEC. UL Listed, CSA Approved.
Arrow Hart 2151V-BOX Decorator Wall Plate Arrow Hart 2151 Decorative Standard Wall Plate WALLPLATE DECO 1G
WALLPLATE DECO 1G
Our Price: $0.58
Molded from non-flammable thermoset. Flush fitting, warp resistant design. Matching screws provided. High gloss finish is soil resistant. Standard size - 2.75" x 4.50", boxed. Molded from non-flammable thermoset. Flush fitting, warp resistant design. Matching screws provided. High gloss finish is soil resistant. Standard size - 2.75" x 4.50", boxed. Molded from non-flammable thermoset. Flush fitting, warp resistant design. Matching screws provided. High gloss finish is soil resistant. Standard size - 2.75" x 4.50", boxed.
Halex 96191 Rigid IMC Conduit Locknut Halex 97523 Insulated Conduit Bushing Halex 96071 Knock Out Seals
Steel with zinc plating. Indoor or outdoor applications. Use to secure Rigid or IMC conduit or various threaded fittings to a steel outlet box or other metal enclosure. High impact thermoplastic. Flame retardant to 105 degrees C. Use with locknut to terminate threaded Rigid or IMC conduit to an outlet box. The rounded surface of the bushing prevents damage to wire insulation. Required by the NEC. UL Listed, CSA Approved. Use to cover exposed knock-out holes in steel outlet boxes and other metal enclosures.
Halex 96072 Knock Out Seals Halex 96192 Rigid IMC Conduit Locknut Halex 26190 Conduit Locknut
Use to cover exposed knock-out holes in steel outlet boxes and other metal enclosures. Steel with zinc plating. Indoor or outdoor applications. Use to secure Rigid or IMC conduit or various threaded fittings to a steel outlet box or other metal enclosure. Halex Conduit Locknut, 1/2 in Nominal, Steel, Zinc Plated, CSA Certified, UL Listed, For use to secure rigid, imc conduit or various threaded fittings to a steel outlet box or other metal enclosure, indoor/outdoor
Halex 97524 Insulated Conduit Bushing Halex 96193 Rigid Conduit Locknut Halex 90701 Conduit Chase Nipple
High impact thermoplastic. Flame retardant to 105 degrees C. Use with locknut to terminate threaded Rigid or IMC conduit to an outlet box. The rounded surface of the bushing prevents damage to wire insulation. Required by the NEC. UL Listed, CSA Approved. Steel with zinc plating. Indoor or outdoor applications. Use to secure Rigid or IMC conduit or various threaded fittings to a steel outlet box or other metal enclosure. Zinc die cast. Indoor or outdoor applications. Use to terminate threaded conduit to a knockout box or enclosure, where space within the box is limited. Used with a locknut to provide a short raceway between boxes or enclosures. UL and CSA approved.
WALLPLATE RCPT LT ALMOND 1G   Halex 91321 Reducing Conduit Bushing Halex 96194 Rigid IMC Conduit Locknut
Virtually unbreakable, with high structural rigidity, long-term form retention and impact and abrasion resistance. Screw-catch feature holds mounting screws captive. Matching screws provided. High gloss finish is soil resistant. Mid-size - 3.125" x 4.875". Zinc die cast. Indoor or outdoor applications. Use to reduce the entry size of a run of threaded conduit. UL Approved. Steel with zinc plating. Indoor or outdoor applications. Use to secure Rigid or IMC conduit or various threaded fittings to a steel outlet box or other metal enclosure.
WALLPLATE COMBO 2G LA         Halex 91641 Box Spacer Halex 90211 Compression Connector
WALLPLATE COMBO 2G LA
Our Price: $1.14
Flush fitting, warp resistant design. Screw-catch feature holds mounting screws captive. Matching screws provided. High gloss finish is soil resistant. Standard size - 4.50" x 4.563". Die cast of high strength corrosion resistant zinc alloy. Locknut is reversible. It is designed to cut through protective coatings on boxes and enclosures to assure ground continuity. Use as a raceway between two steel outlet boxes or other metal enclosures. UL and CSA Listed. Zinc die cast. Use to connect EMT conduit to steel outlet box, load center or other metal enclosure. UL Approved.
Arrow Hart 2152W-BOX Decorator Wall Plate Arrow Hart 2153W-BOX Combination Wall Plate Arrow Hart 2152V-BOX Decorator Wall Plate
Molded from non-flammable thermoset. Flush fitting, warp resistant design. Matching screws provided. High gloss finish is soil resistant. Standard size - 4.50" x 4.563", boxed. Arrow Hart Wall Plate, Combination, Standard, Arrow Hart, 4-1/2 in Length, 4.563 in Width, 0.08 in Thickness, 2 Gangs, Thermoset, White, Flush Mounting, -40 TO 90 deg C, Includes: Screws, cUL/UL Listed, 1-3/8 in First Gang to Edge, 1.813 in Gang to Gang, For Toggle/Rocker Switch Molded from non-flammable thermoset. Flush fitting, warp resistant design. Matching screws provided. High gloss finish is soil resistant. Standard size - 4.50" x 4.563", boxed.
Arrow Hart 2153V-BOX Combination Wall Plate WALLPLATE ROCKER 2G           WALLPLATE ROCKER TOGGLE 2G
WALLPLATE ROCKER 2G
Our Price: $1.30
Arrow Hart Wall Plate, Combination, Standard, Arrow Hart, 4-1/2 in Length, 4.563 in Width, 0.08 in Thickness, 2 Gangs, Thermoset, Ivory, Flush Mounting, -40 TO 90 deg C, Includes: Screws, cUL/UL Listed, 1-3/8 in First Gang to Edge, 1.813 in Gang to Gang, For Toggle/Rocker Switch Molded from non-flammable thermoset. Flush fitting, warp resistant design. Matching screws provided. High gloss finish is soil resistant. Standard size - 4.50" x 4.563", boxed.
Halex 96195 Rigid Conduit Locknut Halex 91331 Reducing Conduit Bushing Halex 16405B Box Spacer
Steel with zinc plating. Indoor or outdoor applications. Use to secure Rigid or IMC conduit or various threaded fittings to a steel outlet box or other metal enclosure. Zinc die cast. Indoor or outdoor applications. Use to reduce the entry size of a run of threaded conduit. UL Approved. Zinc die cast. Use as a raceway between two steel outlet boxes or other metal enclosures. UL Listed. Bulk packed.
Halex 91332 Reducing Conduit Bushing WALLPLATE DPLX/DECO LT ALM 2G Halex 64005 Conduit Coupling
Zinc die cast. Indoor or outdoor applications. Use to reduce the entry size of a run of threaded conduit. UL Approved. Molded from non-flammable thermoset. Flush fitting, warp resistant design. Matching screws provided. High gloss finish is soil resistant. Standard size - 4.50" x 4.563", boxed. Steel, indoor or out. Use to join threaded Rigid or IMC conduit together. UL Listed.
Arrow Hart 2157 Combination Decorative Standard Wall Plate Halex 26071 Knock Out Seals Arrow Hart 2158 Combination Standard Wall Plate
Molded from non-flammable thermoset. Flush fitting, warp resistant design. Matching screws provided. High gloss finish is soil resistant. Standard size - 4.50" x 4.563", boxed. Use to cover exposed knock-out holes in steel outlet boxes and other metal enclosures. Molded from non-flammable thermoset. Flush fitting, warp resistant design. Screw-catch feature holds mounting screws captive and simplifies installation. Matching screws provided. High gloss finish is soil resistant. Standard size - 4.50" x 6.375", boxed.
Arrow Hart 2158 Combination Standard Wall Plate Halex 97526 Insulated Conduit Bushing Halex 90221 Concrete Tight Compression Coupling
Molded from non-flammable thermoset. Flush fitting, warp resistant design. Screw-catch feature holds mounting screws captive and simplifies installation. Matching screws provided. High gloss finish is soil resistant. Standard size - 4.50" x 6.375", boxed. High impact thermoplastic. Flame retardant to 105 degrees C. Use with locknut to terminate threaded Rigid or IMC conduit to an outlet box. The rounded surface of the bushing prevents damage to wire insulation. Required by the NEC. UL Listed, CSA Approved. Use to join two lengths of EMT conduit together. Zinc. UL, CSA Approved.
Halex 90212 Concrete Tight Rain Tight Compression Connector Halex 90702 Conduit Chase Nipple Halex 90222 Concrete Tight Compression Coupling
Zinc die cast. Use to connect EMT conduit to steel outlet box, load center or other metal enclosure. UL Approved. Zinc die cast. Indoor or outdoor applications. Use to terminate threaded conduit to a knockout box or enclosure, where space within the box is limited. Used with a locknut to provide a short raceway between boxes or enclosures. UL and CSA approved. Use to join two lengths of EMT conduit together. Zinc. UL, CSA Approved.
WALLPLATE 2-TOG DECO LT ALM 3G Arrow Hart 2173 Combination Decorative Standard Wall Plate Arrow Hart 2173 Combination Decorative Standard Wall Plate
Molded from non-flammable thermoset. Flush fitting, warp resistant design. Matching screws provided. High gloss finish is soil resistant. Standard size - 4.50" x 6.375", boxed. Molded from non-flammable thermoset. Flush fitting, warp resistant design. Matching screws provided. High gloss finish is soil resistant. Standard size - 4.50" x 6.375", boxed. Molded from non-flammable thermoset. Flush fitting, warp resistant design. Matching screws provided. High gloss finish is soil resistant. Standard size - 4.50" x 6.375", boxed.
Arrow Hart 2163W-BOX Decorator Wall Plate Arrow Hart 2163V-BOX Decorator Wall Plate WALLPLATE ROCKER 3G
WALLPLATE ROCKER 3G
Our Price: $1.88
Molded from non-flammable thermoset. Flush fitting, warp resistant design. Screw-catch feature holds mounting screws captive and simplifies installation. Matching screws provided. High gloss finish is soil resistant. Standard size - 4.50" x 6.375", boxed. Molded from non-flammable thermoset. Flush fitting, warp resistant design. Screw-catch feature holds mounting screws captive and simplifies installation. Matching screws provided. High gloss finish is soil resistant. Standard size - 4.50" x 6.375", boxed. Molded from non-flammable thermoset. Flush fitting, warp resistant design. Screw-catch feature holds mounting screws captive and simplifies installation. Matching screws provided. High gloss finish is soil resistant. Standard size - 4.50" x 6.375", boxed.
Halex 96401 Conduit Coupling Halex 16407B Box Spacer Halex 96196 Rigid IMC Conduit Locknut
Steel, indoor or out. Use to join threaded Rigid or IMC conduit together. UL Listed. Zinc die cast. Use as a raceway between two steel outlet boxes or other metal enclosures. UL Listed. Bulk packed. Steel with zinc plating. Indoor or outdoor applications. Use to secure Rigid or IMC conduit or various threaded fittings to a steel outlet box or other metal enclosure.
Cooper BP231B-SP Wall Plate Screw Cooper BP231W-SP Wall Plate Screw Cooper BP231V-SP Wall Plate Screw
Colors to match wall plates. 6/32" x 1/2". UL Listed. Colors to match wall plates. 6/32" x 1/2". UL Listed. Colors to match wall plates. 6/32" x 1/2". UL Listed.
Halex 75225 Insulated Conduit Bushing Halex 02110 Compression Connector Halex 90401 Offset Nipple
High impact thermoplastic. Flame retardant to 105 degrees C. Use with locknut to terminate threaded Rigid or IMC conduit to an outlet box. The rounded surface of the bushing prevents damage to wire insulation. Required by the NEC. UL Listed, CSA Approved. Zinc die cast. Use to connect EMT conduit to steel outlet box, load center or other metal enclosure. UL Approved. Zinc die cast. Use as an offset connector between two enclosures. Offsets the axis of the raceway 3/4". UL Approved.
Halex 01925B IMC Conduit Locknut Arrow Hart STE14W Blank Mid Size Wall Plate Arrow Hart STE14V Blank Mid Size Wall Plate
Use to secure Rigid or IMC conduit or various threaded fittings to a steel outlet box or other metal enclosure. Bulk packed. End plate, blank strap mount with metal yoke. High gloss finish. Thermoplastic construction for durability and flexibility. Easy to snap together and lock. Mid-size design to fit over most existing wall openings. Screw-Catch feature holds already attached mounting screws captive for easy installation. Screws are slotted steel, baked enamel and painted.  Meets current Federal specifications as tested to UL 514 (file no. E33216). Meets CSA standard C22.2, No. 42.1, (file no.9294). NEMA WD-1, WD-6. Meets flammability requirements per UL 94, V2 rated. Temperature rating -40 degrees C to 70 degrees C. End plate, blank strap mount with metal yoke. High gloss finish. Thermoplastic construction for durability and flexibility. Easy to snap together and lock. Mid-size design to fit over most existing wall openings. Screw-Catch feature holds already attached mounting screws captive for easy installation. Screws are slotted steel, baked enamel and painted.  Meets current Federal specifications as tested to UL 514 (file no. E33216). Meets CSA standard C22.2, No. 42.1, (file no.9294). NEMA WD-1, WD-6. Meets flammability requirements per UL 94, V2 rated. Temperature rating -40 degrees C to 70 degrees C.
Halex 96402 Conduit Coupling Arrow Hart STC14V Blank Mid Size Wall Plate Arrow Hart STC14W Blank Mid Size Wall Plate
Steel, indoor or out. Use to join threaded Rigid or IMC conduit together. UL Listed. Center plate, blank strap mount with metal yoke. High gloss finish. Thermoplastic construction for durability and flexibility. Easy to snap together and lock. Mid-size design to fit over most existing wall openings. Screw-Catch feature holds already attached mounting screws captive for easy installation. Screws are slotted steel, baked enamel and painted. Meets current Federal specifications as tested to UL 514 (file no. E33216). Meets CSA standard C22.2, No. 42.1, (file no.9294). NEMA WD-1, WD-6. Meets flammability requirements per UL 94, V2 rated. Temperature rating -40 degrees C to 70 degrees C. Center plate, blank strap mount with metal yoke. High gloss finish. Thermoplastic construction for durability and flexibility. Easy to snap together and lock. Mid-size design to fit over most existing wall openings. Screw-Catch feature holds already attached mounting screws captive for easy installation. Screws are slotted steel, baked enamel and painted. Meets current Federal specifications as tested to UL 514 (file no. E33216). Meets CSA standard C22.2, No. 42.1, (file no.9294). NEMA WD-1, WD-6. Meets flammability requirements per UL 94, V2 rated. Temperature rating -40 degrees C to 70 degrees C.
Halex 90703 Conduit Chase Nipple Mediasync 3532-4W Standard Telephone Wall Jack Mediasync 3532-4V Standard Telephone Wall Jack
Zinc die cast. Indoor or outdoor applications. Use to terminate threaded conduit to a knockout box or enclosure, where space within the box is limited. Used with a locknut to provide a short raceway between boxes or enclosures. UL and CSA approved. Spring wire contacts, 0.018" diameter with gold plating over nickel to maximize contact life and reduce corrosion. High impact thermoplastic meets UL 94V-O Flame Retardency Rating as well as UL 1863 and FCC Part 68 requirements. Boxed. Spring wire contacts, 0.018" diameter with gold plating over nickel to maximize contact life and reduce corrosion. High impact thermoplastic meets UL 94V-O Flame Retardency Rating as well as UL 1863 and FCC Part 68 requirements. Boxed.
Halex 02210 Concrete Tight Compression Coupling Halex 75230 Insulated Conduit Bushing AmerTac 935RW Wall Plate
Use to join two lengths of EMT conduit together. Zinc. UL, CSA Approved. High impact thermoplastic. Flame retardant to 105 degrees C. Use with locknut to terminate threaded Rigid or IMC conduit to an outlet box. The rounded surface of the bushing prevents damage to wire insulation. Required by the NEC. UL Listed, CSA Approved. With screws. 5" height x 2-3/4" width x 1/4" depth.
AmerTac 935RAL Wall Plate Halex 64010 Conduit Coupling Halex 26073 Knock Out Seals
With screws. 5" height x 2-3/4" width x 1/4" depth. Steel, indoor or out. Use to join threaded Rigid or IMC conduit together. UL Listed. Use to cover exposed knock-out holes in steel outlet boxes and other metal enclosures.
AmerTac 935DAL Wall Plate Halex 02905B Compression Conduit Elbow Arrow Hart 93401-BOX Decorator Wall Plate
With screws. 5" height x 2-3/4" width x 1/4" depth. Zinc die cast. Concrete-tight. Indoor or outdoor applications. Use to connect EMT conduit to a metal outlet box or enclosure where a 90 degree bend is required and a pipe bending tool is not used. UL, CSA Listed. Made of Type 304 stainless steel alloy for superior non-magnetic corrosion-resistant properties. Plates are 0.032" thick. Brushed satin finish resists fingerprints. Matching stainless steel mounting screws provided. Standard size - 2.75" x 4.50", boxed.
Arrow Hart 93111-BOX Standard Wall Plate Arrow Hart 93091-BOX Standard Wall Plate Halex 90402 Offset Nipple
Made of Type 304 stainless steel alloy for superior non-magnetic corrosion-resistant properties. Plates are 0.032" thick. Brushed satin finish resists fingerprints. Matching stainless steel mounting screws provided. Standard size - 2.75" x 4.50", with 1.594" hole. Made of Type 304 stainless steel alloy for superior non-magnetic corrosion-resistant properties. Plates are 0.032" thick. Brushed satin finish resists fingerprints. Matching stainless steel mounting screws provided. Standard size - 2.75" x 4.50", with 1.406" hole, boxed. Zinc die cast. Use as an offset connector between two enclosures. Offsets the axis of the raceway 3/4". UL Approved.
Halex 07012 Conduit Chase Nipple Halex 64405 Conduit Elbow LOCK NUT SEALER 1/2IN
LOCK NUT SEALER 1/2IN
Our Price: $3.36
Zinc die cast. Indoor or outdoor applications. Use to terminate threaded conduit to a knockout box or enclosure, where space within the box is limited. Used with a locknut to provide a short raceway between boxes or enclosures. UL and CSA approved. To connect EMT conduit together to allow for 90 degree bends. UL Approved. Secures rigid or IMC conduit, or threaded fittings to steel outlet boxes or other steel boxes where moisture proofing is needed. Steel with zinc plating, pre-molded seal on one side.
Halex 26074 Knock Out Seals AmerTac 935DW Wall Plate Zenith TS1001CW In-Line Coupler
Use to cover exposed knock-out holes in steel outlet boxes and other metal enclosures. With screws. 5" height x 2-3/4" width x 1/4" depth. Connects two modular line cords. .87" height x 1.37" width x 0.5" depth.
Halex 64012 Conduit Coupling Halex 02112 Compression Connector Halex 90292 Concrete Tight Compression Short Radius Conduit Elbow
Steel, indoor or out. Use to join threaded Rigid or IMC conduit together. UL Listed. Zinc die cast. Use to connect EMT conduit to steel outlet box, load center or other metal enclosure. UL Approved. Zinc die cast. Concrete-tight. Indoor or outdoor applications. Use to connect EMT conduit to a metal outlet box or enclosure where a 90 degree bend is required and a pipe bending tool is not used. UL, CSA Listed.
Halex 90291 Concrete Tight Compression Short Radius Conduit Elbow Halex 94105 Pull Conduit Elbow with Neoprene Gasket Halex 26075 Knock Out Seals
Zinc die cast. Concrete-tight. Indoor or outdoor applications. Use to connect EMT conduit to a metal outlet box or enclosure where a 90 degree bend is required and a pipe bending tool is not used. UL, CSA Listed. Zinc die cast. Indoors or outdoors. Use as a wire pulling elbow to facilitate wire pulling through a sharp bend in a run of threaded Rigid or IMC conduit. Removable cover provides easy access to wiring. UL Approved. Bulk packed. Use to cover exposed knock-out holes in steel outlet boxes and other metal enclosures.
Zenith TS1001SPJ2W 2-Way Duplex Telephone Splitter Halex 02212 Concrete Tight Compression Coupling Halex 58305 Rigid Threaded Conduit Body with Cover and Gasket
Split one connection into two. Four conductor construction. Allows for up to three different phone lines. .75" height x 1" width x 1.5" depth. Use to join two lengths of EMT conduit together. Zinc. UL, CSA Approved. Aluminum, indoors or outdoors. Use to gain access to the interior of a raceway for wire pulling, splicing (with limitations as specified by the NEC), and maintenance. With cover and gasket. UL Approved. Tray boxed.
Halex 58405 Rigid Threaded Conduit Body with Cover and Gasket Halex 58605 Rigid Threaded Conduit Body with Cover and Gasket Arrow Hart 39CH-BOX Wall Plate
Copper-free die cast aluminum. Indoors or outdoors. Use to gain access to the interior of a raceway for wire pulling, splicing (with limitations as specified by the NEC), and maintenance. With cover and gasket. UL Approved. Tray boxed. Aluminum, indoor or outdoor. Use to gain access to the interior of a raceway for wire pulling, splicing (with limitations as specified by the NEC), and maintenance. With cover and gasket. UL Approved. Full gauge and size beveled-edge; furnished with mounting screws. Fit 1253, 1254 and 1263 flush receptacles. Standard size - 2.75" x 4.50", boxed.
Halex 58905 Rigid Threaded Conduit Body with Cover and Gasket Halex 64505 Conduit Elbow Arrow Hart Eagle 69-BOX Standard Wall Plate
Aluminum, indoor or outdoor. Use to gain access to the interior of a raceway for wire pulling, splicing (with limitations as specified by the NEC), and maintenance. With cover and gasket. UL Approved. Tray boxed. To connect EMT conduit together to allow for 45 degree bends. Fits 1257 and 1258 flush receptacles.
Halex 64507 Conduit Elbow Arrow Hart Eagle 68-BOX Standard Wall Plate Halex 07015 Conduit Chase Nipple
To connect EMT conduit together to allow for 45 degree bends. Standard size two gang metal wallplate for power devices using a 2.1563" single opening. Zinc die cast. Indoor or outdoor applications. Use to terminate threaded conduit to a knockout box or enclosure, where space within the box is limited. Used with a locknut to provide a short raceway between boxes or enclosures. UL and CSA approved.
Zenith TS1001SPJ3W Duplex Telephone Splitter Halex 61820B IMC Sealer Locknut Zenith TM1001SMSMW Small Wall Jack
Split one connection into three. Four conductor construction. Allows for up to three different phone lines. .75" height x 1.5" width x 1.5" depth. Secures rigid or IMC conduit, or threaded fittings to steel outlet boxes or other steel boxes where moisture proofing is needed. Steel with zinc plating, pre-molded seal on one side. Small surface mount wall jack, 4 wire. 2" height x 1.25" width x 0.75" depth.
Halex 59505 Service Entrance Elbow Halex 04010 Offset Nipple AmerTac 161D Square Corner Wall Plate
Copper-free die cast aluminum. Use to gain access to the interior of a raceway for wire pulling, inspection and maintenance. UL Approved. Tray boxed. Zinc die cast. Use as an offset connector between two enclosures. Offsets the axis of the raceway 3/4". UL Approved. Traditional square corner design. With screws. 5" height x 2-7/8" width x 1/4" depth.
AmerTac Amerelle Traditional 161RR Square Corner Wall Plate AmerTac Traditional 161R Decorative Square Corner Wall Plate AmerTac Traditional 163RBR Decorative Square Corner Wall Plate
Traditional square corner design. With screws. 5" height x 4-5/8" width x 1/4" depth. Traditional square corner design. With screws. 5" height x 2-7/8" width x 1/4" depth. Traditional square corner design. With screws.
AmerTac 163DBR Square Corner Wall Plate Halex 02115 Compression Connector Halex 64407 Conduit Elbow
Traditional square corner design. With screws. 5" height x 2-7/8" width x 1/4" depth. Zinc die cast. Use to connect EMT conduit to steel outlet box, load center or other metal enclosure. UL Approved. To connect EMT conduit together to allow for 90 degree bends. UL Approved.
Halex 20210 Concrete Tight Compression Connector Halex 64015 Conduit Coupling Halex 58805 Rigid Threaded Conduit Body with Cover and Gasket
Zinc die cast. Use to connect EMT conduit to steel outlet box, load center or other metal enclosure. UL Approved. Steel, indoor or out. Use to join threaded Rigid or IMC conduit together. UL Listed. Copper-free die cast aluminum. Indoors or outdoors. Use to gain access to the interior of a raceway for wire pulling, splicing (with limitations as specified by the NEC), and maintenance. UL Approved. Tray boxed.
Halex 94107 Pull Conduit Elbow Halex 21642 Box Spacer Zenith TW1001SW Single Wall Jack
Zinc die cast. Indoors or outdoors. Use as a wire pulling elbow to facilitate wire pulling through a sharp bend in a run of threaded Rigid or IMC conduit. Removable cover provides easy access to wiring. UL Approved. Bulk packed. Die cast of high strength corrosion resistant zinc alloy. Locknut is reversible. It is designed to cut through protective coatings on boxes and enclosures to assure ground continuity. Use as a raceway between two steel outlet boxes or other metal enclosures. UL and CSA Listed. Connects phone wire through a wall. 4.5" height x 2.75" width x .75" depth.
Halex 64105 Conduit Elbow AmerTac Zenith TL1007W Telephone Cord Arrow Hart Eagle 2168 Standard Wall Plate
Use to allow a 90 degree change of direction in a run of Rigid or IMC conduit. UL Listed. Connects phone or modem to phone outlet. Screw-catch feature holds mounting screws captive and simplifies installation. Matching mounting screws provided.
Halex 26076 Knock Out Seals AmerTac Zenith TL1012W Telephone Cord Halex 64320 Conduit Nipple
Use to cover exposed knock-out holes in steel outlet boxes and other metal enclosures. Connects phone or modem to phone outlet. Made of steel, fully threaded. Indoor or outdoor. Use to connect two steel outlet boxes or other metal enclosures or to extend a length of threaded Rigid or IMC conduit. Bulk packed.
Arrow Hart 2164 Decorative Standard Wall Plate Arrow Hart 2164 Decorative Standard Wall Plate Amerelle Traditional Duplex Wall Plate
Molded from non-flammable thermoset. Flush fitting, warp resistant design. Screw-catch feature holds mounting screws captive and simplifies installation. Matching screws provided. High gloss finish is soil resistant. Standard size. Molded from non-flammable thermoset. Flush fitting, warp resistant design. Screw-catch feature holds mounting screws captive and simplifies installation. Matching screws provided. High gloss finish is soil resistant. Standard size. Amerelle Wall Plate, Duplex, Series: Traditional, 1 Gangs, 2 Outlets, Stamped Steel, Brushed Nickel, Wall Mounting, Includes: Matching Screws, UL Listed
Amerelle Century 1-Rocker Wall Plate American Tack and Hdwe TW1002CPW Zenith Telephone Wall Jacks Zenith TM1001BS Butt Splice Connector
Amerelle Wall Plate, 1-Rocker, Series: Century, 4-15/16 in Length, 2-7/8 in Width, 1 Gangs, Stamped Steel, Brushed Nickel, Screw Mounting, Includes: Matching Screws, UL Listed Connects phone wire and coax cable through a wall. 4.5" height x 2.75" width x 1" depth. Splices 19-26 AWG line cord. Crimping tool required, sold separately.
Zenith TW1002DW Duplex Wall Jack Halex 02120 Compression Connector Halex 02215 Concrete Tight Compression Coupling
Connects two phone wires through a wall. 4.5" height x 2.75" width x .75" depth. Zinc die cast. Use to connect EMT conduit to steel outlet box, load center or other metal enclosure. UL Approved. Use to join two lengths of EMT conduit together. Zinc. UL, CSA Approved.
Halex 95212B Insulated Metallic Grounding Conduit Bushing with Lug Halex 58907 Rigid Threaded Conduit Body with Cover and Gasket Halex 04012 Offset Nipple
Zinc die cast. Rounded surface prevents damage to insulation. Thermoplastic liner rated at 150 degree F. Indoor or outdoor use. Use with locknut to terminate service conduit to a cabinet. Lug provided for bonding jumper to a neutral bus bar. UL Listed, CSA Approved. Aluminum, indoor or outdoor. Use to gain access to the interior of a raceway for wire pulling, splicing (with limitations as specified by the NEC), and maintenance. With cover and gasket. UL Approved. Tray boxed. Zinc die cast. Use as an offset connector between two enclosures. Offsets the axis of the raceway 3/4". UL Approved.
Halex 58607 Rigid Threaded Conduit Body with Cover and Gasket Halex 58307 Rigid Threaded Conduit Body with Cover and Gasket Halex 58407 Rigid Threaded Conduit Body with Cover and Gasket
Aluminum, indoor or outdoor. Use to gain access to the interior of a raceway for wire pulling, splicing (with limitations as specified by the NEC), and maintenance. With cover and gasket. UL Approved. Aluminum, indoors or outdoors. Use to gain access to the interior of a raceway for wire pulling, splicing (with limitations as specified by the NEC), and maintenance. With cover and gasket. UL Approved. Tray boxed. Copper-free die cast aluminum. Indoors or outdoors. Use to gain access to the interior of a raceway for wire pulling, splicing (with limitations as specified by the NEC), and maintenance. With cover and gasket. UL Approved. Tray boxed.
Zenith TW1001WPW Single Wall Phone Jack Halex 07020 Conduit Chase Nipple Halex 64107 Conduit Elbow
Standard outlet for wall mounted phones. 4.67" height x 3" width x 1" depth. Zinc die cast. Indoor or outdoor applications. Use to terminate threaded conduit to a knockout box or enclosure, where space within the box is limited. Used with a locknut to provide a short raceway between boxes or enclosures. UL and CSA approved. Use to allow a 90 degree change of direction in a run of Rigid or IMC conduit. UL Listed.
Halex 20221 Concrete Tight Compression Coupling Halex 59507 Service Entrance Elbow Amerelle Century 2-Rocker Wall Plate
Use to join two lengths of EMT conduit together. Zinc. UL, CSA Approved. Copper-free die cast aluminum. Use to gain access to the interior of a raceway for wire pulling, inspection and maintenance. UL Approved. Tray boxed. Amerelle Wall Plate, 2-Rocker, Series: Century, 4-15/16 in Length, 4-9/16 in Width, 2 Gangs, Stamped Steel, Brushed Nickel, Screw Mounting, Includes: Matching Screws, UL Listed
Halex 64410 Conduit Elbow Halex 58807 Rigid Threaded Conduit Body with Cover and Gasket BUSHING GRND MTL INSUL 1-1/4IN
To connect EMT conduit together to allow for 90 degree bends. UL Approved. Copper-free die cast aluminum. Indoors or outdoors. Use to gain access to the interior of a raceway for wire pulling, splicing (with limitations as specified by the NEC), and maintenance. UL Approved. Tray boxed. Zinc die cast. Rounded surface prevents damage to insulation. Thermoplastic liner rated at 150 degree F. Indoor or outdoor use. Use with locknut to terminate service conduit to a cabinet. Lug provided for bonding jumper to a neutral bus bar. UL Listed, CSA Approved.
Halex 20212 Concrete Tight Compression Connector Thomas & Betts E989NNJ-CAR Rigid Junction Box Halex 02220 Concrete Tight Compression Coupling
Zinc die cast. Use to connect EMT conduit to steel outlet box, load center or other metal enclosure. UL Approved. Manufactured from PVC  thermoplastic molding compound and featuring gasketed lids attached with stainless steel screws. Offers corrosion resistance and physical properties needed for direct burial applications. Intended for indoor or outdoor use, to provide a degree of protection against contact with enclosed equipment, falling dirt, hose directed water, entry of water during prolonged submersion at a limited depth, and external ice formation. UL Listed with a NEMA 6P rating per section 314.29. Use to join two lengths of EMT conduit together. Zinc. UL, CSA Approved.
Halex 99526 Insulated Metallic Grounding Conduit Bushing with Lug Amerelle Metro Line Duplex Wall Plate Amerelle Metro Line 1-Rocker Wall Plate
Zinc die cast. Rounded surface prevents damage to insulation. Thermoplastic liner rated at 150 degree F. Indoor or outdoor use. Use with locknut to terminate service conduit to a cabinet. Lug provided for bonding jumper to a neutral bus bar. UL Listed, CSA Approved. Amerelle Wall Plate, Duplex, Series: Metro Line, 1 Gangs, 2 Outlets, Cast Metal, Brushed Nickel, Wall Mounting, Includes: Matching Screws, UL Listed Amerelle Wall Plate, 1-Rocker, Series: Metro Line, 4-7/8 in Length, 3 in Width, 1 Gangs, Cast Metal, Brushed Nickel, Screw Mounting, Includes: Matching Screws, UL Listed
AmerTac Amerelle Studio 61RCH Decorative Rectangular Wall Plate Halex 64020 Conduit Coupling AmerTac Zenith TL1025W Telephone Cord
With screws. 5-1/8" height x 3-1/5" width x 3/8" depth. Steel, indoor or out. Use to join threaded Rigid or IMC conduit together. UL Listed. Connects phone or modem to phone outlet.
AmerTac Chelsea Duplex Wall Plate Amerelle Chelsea 1-Rocker Wall Plate Amerelle Duplex Wall Plate
AmerTac Wall Plate, Duplex, Series: Chelsea, 1 Gangs, 2 Outlets, Stamped Steel, Brushed Nickel, Wall Mounting, Includes: Matching Screws, UL Listed Amerelle Wall Plate, 1-Rocker, Series: Chelsea, 4-7/8 in Length, 3-1/8 in Width, 1 Gangs, Stamped Steel, Brushed Nickel, Screw Mounting, Includes: Matching Screws, UL Listed Amerelle Wall Plate, Duplex, Series: Contemporary, 1 Gangs, 2 Outlets, Wood, Unfinished Ash, Screw Mounting, Includes: Matching Screws, UL Listed
Amerelle 1-Rocker Wall Plate Halex 20222 Concrete Tight Compression Coupling AmerTac Zenith TH1025B Telephone Cord
Amerelle Wall Plate, 1-Rocker, Series: Contemporary, 5-1/4 in Length, 3 in Width, 1 Gangs, Ash Wood, Unfinished, Screw Mounting, Includes: Matching Screws, UL Listed Use to join two lengths of EMT conduit together. Zinc. UL, CSA Approved. Connects phone handset to base.
AmerTac Zenith TH1025W Telephone Cord Halex 04015 Offset Nipple Halex 58610 Rigid Threaded Conduit Body with Cover and Gasket
Connects phone handset to base. Zinc die cast. Use as an offset connector between two enclosures. Offsets the axis of the raceway 3/4". UL Approved. Aluminum, indoor or outdoor. Use to gain access to the interior of a raceway for wire pulling, splicing (with limitations as specified by the NEC), and maintenance. With cover and gasket. UL Approved.
Halex 95215B Insulated Metallic Grounding Conduit Bushing with Lug Halex 64412 Conduit Elbow Halex 95220B Insulated Metallic Grounding Conduit Bushing with Lug
Zinc die cast. Rounded surface prevents damage to insulation. Thermoplastic liner rated at 150 degree F. Indoor or outdoor use. Use with locknut to terminate service conduit to a cabinet. Lug provided for bonding jumper to a neutral bus bar. UL Listed, CSA Approved. To connect EMT conduit together to allow for 90 degree bends. UL Approved. Zinc die cast. Rounded surface prevents damage to insulation. Thermoplastic liner rated at 150 degree F. Indoor or outdoor use. Use with locknut to terminate service conduit to a cabinet. Lug provided for bonding jumper to a neutral bus bar. UL Listed, CSA Approved.
LOCK NUT SEALER 2IN           Amerelle 901DL Duplex Wall Plate Amerelle 1-Rocker Wall Plate
LOCK NUT SEALER 2IN
Our Price: $8.40
Secures rigid or IMC conduit, or threaded fittings to steel outlet boxes or other steel boxes where moisture proofing is needed. Steel with zinc plating, pre-molded seal on one side. Amerelle Wall Plate, Duplex, 1 Gangs, 2 Outlets, Wood, Light Oak, Screw Mounting, Includes: Matching Screws, UL Listed Amerelle Wall Plate, 1-Rocker, Series: Contemporary, 5-1/4 in Length, 3 in Width, 1 Gangs, Oak Wood, Light, Screw Mounting, Includes: Matching Screws, UL Listed
Halex 59510 Service Entrance Elbow Halex 64110 Conduit Elbow Halex 29523 Insulated Metallic Grounding Conduit Bushing with Lug
Copper-free die cast aluminum. Use to gain access to the interior of a raceway for wire pulling, inspection and maintenance. UL Approved. Tray boxed. Use to allow a 90 degree change of direction in a run of Rigid or IMC conduit. UL Listed. Zinc die cast. Rounded surface prevents damage to insulation. Thermoplastic liner rated at 150 degree F. Indoor or outdoor use. Use with locknut to terminate service conduit to a cabinet. Lug provided for bonding jumper to a neutral bus bar. UL Listed, CSA Approved.
Arrow Hart 2131W-BOX Round Wall Plate Halex 94110 Pull Conduit Elbow with Neoprene Gasket DETECTOR PUMP WTR LK WH REUSBL
Molded from non-flammable thermoset. Flush fitting, warp resistant design. Screw-catch feature holds mounting screws captive and simplifies installation. Matching screws provided. High gloss finish is soil resistant. Standard size - 2.75" x 4.50", boxed. Zinc die cast. Indoors or outdoors. Use as a wire pulling elbow to facilitate wire pulling through a sharp bend in a run of threaded Rigid or IMC conduit. Removable cover provides easy access to wiring. UL Approved. Bulk packed. Economical way to defend against water leaks in multiple locations throughout the home. Detects water 1/16" deep. Ideal for use in areas not usually observed: Water heaters - behind washing machines or dishwashers - under refrigerator for ice makers - under sinks - sump pumps of inside pits - toilets - behind or near media systems. Provides early warning of potentially costly water damage. Alarm sounds for up to 24 hours (dependent upon battery life). Low battery chirp. Requires 9V battery (sold separately).
Halex 58810 Rigid Threaded Conduit Body with Cover and Gasket Halex 64415 Conduit Elbow Halex 59512 Service Entrance Elbow
Copper-free die cast aluminum. Indoors or outdoors. Use to gain access to the interior of a raceway for wire pulling, splicing (with limitations as specified by the NEC), and maintenance. UL Approved. Tray boxed. To connect EMT conduit together to allow for 90 degree bends. UL Approved. Copper-free die cast aluminum. Use to gain access to the interior of a raceway for wire pulling, inspection and maintenance. UL Approved. Tray boxed.
Zenith AS110024C Speaker Wire Zenith TW1001WPS Single Wall Phone Jack Halex 04020 Offset Nipple
Used for stereos and hi-fi systems, home theater sound systems. Connects speaker to receiver, tuner/amplifier. Standard outlet for wall mounted phones. 4.67" height x 3" width x 1" depth. Zinc die cast. Use as an offset connector between two enclosures. Offsets the axis of the raceway 3/4". UL Approved.
Halex 64025 Conduit Coupling Arrow Hart 2138 Combination Standard Wall Plate Arrow Hart 2138 Combination Standard Wall Plate
Steel, indoor or out. Use to join threaded Rigid or IMC conduit together. UL Listed. Flush fitting, warp resistant design. Screw-catch feature holds mounting screws captive. Matching screws provided. High gloss finish is soil resistant. Standard size - 4.50" x 4.563". Flush fitting, warp resistant design. Screw-catch feature holds mounting screws captive. Matching screws provided. High gloss finish is soil resistant. Standard size - 4.50" x 4.563".
Arrow Hart 2138 Combination Standard Wall Plate Arrow Hart 5131B-BOX Wall Plate Arrow Hart 5131W-BOX Wall Plate
Flush fitting, warp resistant design. Screw-catch feature holds mounting screws captive. Matching screws provided. High gloss finish is soil resistant. Standard size - 4.50" x 4.563". Molded from non-flammable nylon. Flush fitting, warp resistant design. Screw-catch feature holds mounting screws captive and simplifies installation. Matching screws provided. High gloss finish is soil resistant. Standard size - 2.75" x 4.50", boxed. Molded from non-flammable nylon. Flush fitting, warp resistant design. Screw-catch feature holds mounting screws captive and simplifies installation. Matching screws provided. High gloss finish is soil resistant. Standard size - 2.75" x 4.50", boxed.
Arrow Hart 5131V-BOX Wall Plate Zenith AS105018C Speaker Wire Carlon E987NR Rigid Junction Box
Molded from non-flammable nylon. Flush fitting, warp resistant design. Screw-catch feature holds mounting screws captive and simplifies installation. Matching screws provided. High gloss finish is soil resistant. Standard size - 2.75" x 4.50", boxed. Used for stereos and hi-fi systems, home theater sound systems. Connects speaker to receiver, tuner/amplifier. Manufactured from PVC  thermoplastic molding compound and featuring gasketed lids attached with stainless steel screws. Offers corrosion resistance and physical properties needed for direct burial applications. Intended for indoor or outdoor use, to provide a degree of protection against contact with enclosed equipment, falling dirt, hose directed water, entry of water during prolonged submersion at a limited depth, and external ice formation. UL Listed with a NEMA 6P rating per section 314.29.
AmerTac Zenith TP1050ULA Round Telephone Wire Halex 64112 Conduit Elbow Carlon E987RR Rigid Junction Box
UL approved for behind the wall applications. Connects to junction boxes and wallplates. Allows for up to three different phone lines. Almond color. Use to allow a 90 degree change of direction in a run of Rigid or IMC conduit. UL Listed. Manufactured from PVC  thermoplastic molding compound and featuring gasketed lids attached with stainless steel screws. Offers corrosion resistance and physical properties needed for direct burial applications. Intended for indoor or outdoor use, to provide a degree of protection against contact with enclosed equipment, falling dirt, hose directed water, entry of water during prolonged submersion at a limited depth, and external ice formation. UL Listed with a NEMA 6P rating per section 314.29.
Halex 58612 Rigid Threaded Conduit Body with Cover and Gasket Zenith AS105016C Speaker Wire Zircon 64003 Leak Alert Water Leak Detectors
Aluminum, indoor or outdoor. Use to gain access to the interior of a raceway for wire pulling, splicing (with limitations as specified by the NEC), and maintenance. With cover and gasket. UL Approved. Used for stereos and hi-fi systems, home theater sound systems. Connects speaker to receiver, tuner/amplifier. Place anywhere a potential water leak may occur. Use near or beneath sump pumps, plumbing, dishwashers, washing machines, sinks, water heaters or toilets. Automatic, continuous operation. Loud audible alarm activates with direct water contact. Floats and signals continuously for up to 72 hours. Low battery warning signal alerts when battery needs to be changed. Uses 9 volt battery (not included).
Halex 29525 Insulated Metallic Grounding Conduit Bushing with Lug Halex 75212B Insulated Conduit Bushing Arrow Hart 2157 Combination Decorative Standard Wall Plate
Zinc die cast. Rounded surface prevents damage to insulation. Thermoplastic liner rated at 150 degree F. Indoor or outdoor use. Use with locknut to terminate service conduit to a cabinet. Lug provided for bonding jumper to a neutral bus bar. UL Listed, CSA Approved. High impact thermoplastic. Flame retardant to 105 degrees C. Use with locknut to terminate threaded Rigid or IMC conduit to an outlet box. The rounded surface of the bushing prevents damage to wire insulation. Required by the NEC. UL Listed, CSA Approved. Molded from non-flammable thermoset. Flush fitting, warp resistant design. Matching screws provided. High gloss finish is soil resistant. Standard size - 4.50" x 4.563", boxed.
Leviton R02-C0224-000 1-Gang Wall Plate Mounting Bracket Halex 64115 Conduit Elbow Zenith AS110018C Speaker Wire
For low-voltage wiring, holds wallplate to sheet rock. Use to allow a 90 degree change of direction in a run of Rigid or IMC conduit. UL Listed. Used for stereos and hi-fi systems, home theater sound systems. Connects speaker to receiver, tuner/amplifier.
Halex 58615 Rigid Threaded Conduit Body with Cover and Gasket Raco Wiegmann SC060604RC Pull Box Enclosure Halex 64420 Conduit Elbow
Aluminum, indoor or outdoor. Use to gain access to the interior of a raceway for wire pulling, splicing (with limitations as specified by the NEC), and maintenance. With cover and gasket. UL Approved. Made of 16 gauge steel. Junction boxes for terminating power or communication conductors. Boxes have flat, removal covers fastened with screws. Mounting holes in the back. Gray enamel finish. To connect EMT conduit together to allow for 90 degree bends. UL Approved.
Halex 16320 Conduit Hubs Reliance THP205 Sump Pump Alarm With Food Alert AmerTac Zenith TP1100ULA Round Telephone Wire