Home > ELECTRICAL > SPECIALTY ELECTRICAL > FIRE/HOME PROTECTION > FIRE/SMOKE ALARMS
Sort By:
1
Arrow Hart 2131 Standard Wall Plate Arrow Hart 2131V-BOX Round Wall Plate Hubbell 860 Raised Blank Utility Box Cover
Molded from non-flammable thermoset. Flush fitting, warp resistant design. Screw-catch feature holds mounting screws captive and simplifies installation. Matching screws provided. High gloss finish is soil resistant. Standard size - 2.75" x 4.50", boxed. Molded from non-flammable thermoset. Flush fitting, warp resistant design. Screw-catch feature holds mounting screws captive and simplifies installation. Matching screws provided. High gloss finish is soil resistant. Standard size - 2.75" x 4.50", boxed. Steel box cover, blank with no knockouts. 2-5/16" wide x 4-3/16" tall. UL Listed.
Hubbell 864 Utility Box Cover Hubbell 865 Utility Box Cover WALLPLATE BLANK 1G LA
WALLPLATE BLANK 1G LA
Our Price: $0.62
Steel box cover for duplex receptacle. Rugged construction. 2-5/16" wide x 4-3/16" tall. UL Listed. Steel box cover with single toggle switch opening in the center. 2-5/16" wide x 4-3/16" tall. UL Listed. Molded from non-flammable thermoset. Flush fitting, warp resistant design. Matching screws provided. High gloss finish is soil resistant. Boxed.
Hubbell 8752 Square Flat Blank Electrical Box Cover Hubbell 722 Octagon Flat Blank Electrical Box Cover Carlon HB1BL Blank Handy Box Cover
Rugged construction, used to close an outlet box. 4" square. Angled mounting slots allow for correction of box misalignment. UPC bar code. UL Listed. Rugged construction, used to close an outlet box. Key hole mounting feature allows for installation of cover without removing box screws. UL Listed. Made of a durable polycarbonate material that is virtually indestructible. 1/2" knockout. 4.3" length x 2.38" width. UL Listed.
Carlon HB1GF Handy Outlet Box Cover Carlon HB1SW Handy Box Cover Carlon HB1DP Handy Box Cover
Made of a durable polycarbonate material that is virtually indestructible. 4.3" x 2.38". UL Listed. Made of a durable polycarbonate material that is virtually indestructible. 4.3 length x 2.38 width. UL Listed. Made of a durable polycarbonate material that is virtually indestructible. 4.3" length x 2.38" width. UL Listed.
Halex 90440 Screw-In Connector Halex 91211 Concrete Tight Set Screw Connector Halex 90441 Screw-In Connector
Zinc die cast. Use to connect flexible metallic conduit (Greenfield) to steel outlet box, load center or other metal enclosure. Fits 1/2" knock outs. Zinc die cast. Use to connect EMT conduit to steel outlet box, load center or other metal enclosure. UL Approved. Zinc die cast. Use to connect flexible metallic conduit (Greenfield) to steel outlet box, load center or other metal enclosure. Fits 1/2" knock outs.
Halex 90701 Conduit Chase Nipple Hubbell 863 Utility Box Cover Halex 90451 Screw-In Coupling
Zinc die cast. Indoor or outdoor applications. Use to terminate threaded conduit to a knockout box or enclosure, where space within the box is limited. Used with a locknut to provide a short raceway between boxes or enclosures. UL and CSA approved. Steel box cover with single 1.406" receptacle opening in the center. Rugged construction. 2-5/16" wide x 4-3/16" tall. UL Listed. Zinc die cast. Use to join two pieces of flexible metallic conduit (Greenfield) together.
WALLPLATE RCPT LT ALMOND 1G   Halex 91221 Concrete Tight Set Screw Coupling Hubbell 861 Utility Box Cover
Virtually unbreakable, with high structural rigidity, long-term form retention and impact and abrasion resistance. Screw-catch feature holds mounting screws captive. Matching screws provided. High gloss finish is soil resistant. Mid-size - 3.125" x 4.875". Zinc die cast. Use to join two lengths of EMT conduit together. UL Approved. Steel box cover with 1/2" knockout in the center. 2-5/16" wide x 4-3/16" tall. UL Listed.
Hubbell 8753 Square Flat Electrical Box Cover Halex 91530 Combination Coupling Halex 90580 Cable Connector
Steel box cover with single 1/2" knockout in the center. 4" square. Angled mounting slots allow for correction of box misalignment. UL Listed. Zinc die cast. Use to join EMT conduit to non-metallic sheathed cable. #14/2, #12/3 or 2 #14/2. Indoor use only. With UPC. UL Approved. Zinc die cast. In a dry location, use to connect BX cable to a steel outlet box or other metal enclosure. 3/8" size fits 1/2" knock outs. UL Approved.
Halex 90510 Twin Screw Clamp Connector Hubbell 724 Octagon Flat Electrical Box Cover Halex 91321 Reducing Conduit Bushing
Fits 1/2" knockout, non-metallic cable numbers 14/2, 12/2, 12/3 AWG or 2 number 14/2 AWG or flex cord .300 to .560 inches diameter. In a dry location, use to connect nonmetallic sheathed cable to a steel outlet box or other metal enclosure. UL, Listed, meets CSA requirements. Steel box cover with single 1/2" knockout in the center. Key hole mounting feature allows for installation of cover without removing box screws. UL Listed. Zinc die cast. Indoor or outdoor applications. Use to reduce the entry size of a run of threaded conduit. UL Approved.
Hubbell 8772 Square Raised Device Box Cover Hubbell 703 Round Flat Ceiling Pan Cover Carlon E460R-CAR Blank Round Outlet Box Cover
Used to close outlet box. For mounting switch or receptacle. Size 4" x 4",steel, UL Listed. Steel box cover with 1/2" knockout in the center. Key hole mounting feature allows for installation of cover without removing box screws. UL Listed. High impact lightweight round blank PVC cover for 4" round boxes to make junctions. UL Listed.
Halex 90481 Concrete Tight Set Screw Connector Halex 91212 Concrete Tight Set Screw Connector WALLPLATE COMBO 2G LA
WALLPLATE COMBO 2G LA
Our Price: $1.14
Zinc die cast. In a dry location, use to connect flexible metallic conduit (Greenfield or BX) to a steel outlet box or other metal enclosure. UL Approved. Zinc die cast. Use to connect EMT conduit to steel outlet box, load center or other metal enclosure. UL Approved. Flush fitting, warp resistant design. Screw-catch feature holds mounting screws captive. Matching screws provided. High gloss finish is soil resistant. Standard size - 4.50" x 4.563".
Carlon A400R-CAR Square Blank Electrical Box Cover Raco 8768 Mud-Ring Raised Square Electrical Box Cover Carlon A420RR Raised Tubing Electrical Box Cover
Two gang blank rise. Carlon blue color. Used to close outlet box. For mounting switch or receptacle. Size 4" x 4",steel, UL Listed. Suitable for paneling masonry, plaster, sheetrock, tile and all wall coverings. Brilliant electric blue. UL Listed.
Halex 91641 Box Spacer Carlon A410R-CAR Square Electrical Box Cover Halex 91222 Concrete Tight Set Screw Coupling
Die cast of high strength corrosion resistant zinc alloy. Locknut is reversible. It is designed to cut through protective coatings on boxes and enclosures to assure ground continuity. Use as a raceway between two steel outlet boxes or other metal enclosures. UL and CSA Listed. Suitable for tile, plaster, sheetrock, paneling, masonry and all wall coverings. Brilliant electric blue. UL Listed. Zinc die cast. Use to join two lengths of EMT conduit together. UL Approved.
Halex 90570 Combination Clamp Connector Halex 96510 2-Piece Butterfly Clamp Connector Arrow Hart 2137 Blank Standard Wall Plate
Zinc die cast. In a dry location, use to connect flexible metallic conduit (Greenfield, BX, NM or Metal Clad) to a steel outlet box or other metal enclosure. 3/8" size fits 1/2" knock outs. UL Approved. Zinc die cast. In a dry location, use to secure #14 - #10 non-metallic sheathed cable to steel outlet box or other metal enclosure. No locknut required. Non-flammable, box mounted, flush fitting, warp resistant design. Matching screws provided. High gloss finish is soil resistant. Standard size - 4.50" x 4.563".
Arrow Hart 2137 Blank Standard Wall Plate WALLPLATE BLANK 2G LA         Arrow Hart 2153W-BOX Combination Wall Plate
WALLPLATE BLANK 2G LA
Our Price: $1.27
Non-flammable, box mounted, flush fitting, warp resistant design. Matching screws provided. High gloss finish is soil resistant. Standard size - 4.50" x 4.563". Non-flammable, box mounted, flush fitting, warp resistant design. Matching screws provided. High gloss finish is soil resistant. Standard size - 4.50" x 4.563". Arrow Hart Wall Plate, Combination, Standard, Arrow Hart, 4-1/2 in Length, 4.563 in Width, 0.08 in Thickness, 2 Gangs, Thermoset, White, Flush Mounting, -40 TO 90 deg C, Includes: Screws, cUL/UL Listed, 1-3/8 in First Gang to Edge, 1.813 in Gang to Gang, For Toggle/Rocker Switch
Arrow Hart 2153V-BOX Combination Wall Plate WALLPLATE ROCKER TOGGLE 2G    Halex 90442 Screw-In Connector
Arrow Hart Wall Plate, Combination, Standard, Arrow Hart, 4-1/2 in Length, 4.563 in Width, 0.08 in Thickness, 2 Gangs, Thermoset, Ivory, Flush Mounting, -40 TO 90 deg C, Includes: Screws, cUL/UL Listed, 1-3/8 in First Gang to Edge, 1.813 in Gang to Gang, For Toggle/Rocker Switch Zinc die cast. Use to connect flexible metallic conduit (Greenfield) to steel outlet box, load center or other metal enclosure. Fits 1/2" knock outs.
Raco 787 Mud-Ring Flat Square Electrical Box Cover Halex 91100 Conduit Elbow Raco 8756 Raised Square Open Electrical Box Cover
Steel box cover, used to mount switch or receptacle. UL Listed. Zinc die cast. In a dry location, use to connect flexible metallic conduit (Greenfield or BX) to a steel outlet box or other metal enclosure. Raised device cover. Used to hang light fixture from 4" square box. Not designed for ceiling fan support. Angled mounting slots allow for correction of box misalignment. Raised 5/8" - ears 2-3/4" - 4 cubic inches. UL Listed. UPC bar coded.
Raco 871 Wall Plate Halex 91331 Reducing Conduit Bushing Carlon A471RR Round Tubing Ceiling Box Extender with Round Cover
Two device switch box cover. Made from unpainted, pregalvanized steel. Used with  2 toggle 2 gang switch boxes. UL 514-A Listed, File E195978 / CSA Listed, File LR-1082. Zinc die cast. Indoor or outdoor applications. Use to reduce the entry size of a run of threaded conduit. UL Approved. Half inch raised round high impact lightweight PVC. Used with nonmetallic sheathed cable in octagon boxes. Supports 50 pounds. UL Listed.
Halex 90420 Squeeze Connector Halex 16405B Box Spacer Halex 65705B Snap-In Cable Connector
Zinc die cast. In a dry location, use to connect flexible metallic conduit (Greenfield or BX) to steel outlet box, load center or other metal enclosure. Fits 1/2" knock outs. UL Approved. Zinc die cast. Use as a raceway between two steel outlet boxes or other metal enclosures. UL Listed. Bulk packed. In a dry location, use to connect aluminum or steel AC, aluminum MC, and steel flexible metal conduit. Suitable for: aluminum and steel armored cable with 14/2 - 10/2 wire, steel flexible metal conduit, .45 diameter aluminum interlocked MC cable. Features snap-in installation, no locknut, insulating bushing included.
Halex 12110 Concrete Tight Set Screw Connector Halex 90512 Twin Screw Clamp Connector Halex 91332 Reducing Conduit Bushing
Zinc die cast. Use to connect EMT conduit to steel outlet box, load center or other metal enclosure. UL Approved. Fits non metallic cable, such as Romex, number 14/2 round, number 12/3-8/3 AWG or flex cord .460 to .720 inches diameter. In a dry location, use to connect nonmetallic sheathed cable to a steel outlet box or other metal enclosure. UL Listed, meets CSA requirements. Zinc die cast. Indoor or outdoor applications. Use to reduce the entry size of a run of threaded conduit. UL Approved.
Hubbell 731 Octagon Flat Electrical Box Cover WALLPLATE DPLX/DECO LT ALM 2G Raco 727 Raised Octagon Open Electrical Box Cover
Steel box cover for one duplex receptacle. Key hole mounting feature allows for installation of cover without removing box screws. UL Listed. Molded from non-flammable thermoset. Flush fitting, warp resistant design. Matching screws provided. High gloss finish is soil resistant. Standard size - 4.50" x 4.563", boxed. Used to hang light fixture from 4" octagon box or 4" round ceiling pan. Not designed for ceiling fan support. Key-hole mounting feature allows for installation of cover without removing box screws. Raised 5/8" - 3.8 cubic inch capacity. UL Listed.
Halex 64005 Conduit Coupling Arrow Hart 2157 Combination Decorative Standard Wall Plate Arrow Hart 2158 Combination Standard Wall Plate
Steel, indoor or out. Use to join threaded Rigid or IMC conduit together. UL Listed. Molded from non-flammable thermoset. Flush fitting, warp resistant design. Matching screws provided. High gloss finish is soil resistant. Standard size - 4.50" x 4.563", boxed. Molded from non-flammable thermoset. Flush fitting, warp resistant design. Screw-catch feature holds mounting screws captive and simplifies installation. Matching screws provided. High gloss finish is soil resistant. Standard size - 4.50" x 6.375", boxed.
Arrow Hart 2158 Combination Standard Wall Plate Raco 832 Blank Flat Square Electrical Box Cover Halex 27511 Hit Lock Cable Connectors
Molded from non-flammable thermoset. Flush fitting, warp resistant design. Screw-catch feature holds mounting screws captive and simplifies installation. Matching screws provided. High gloss finish is soil resistant. Standard size - 4.50" x 6.375", boxed. Rugged construction, used to close an outlet box. Key hole mounting feature allows for installation of cover without removing box screws. 4-11/16" square. UL Listed. Fits NM Cable: #14/2, #14/3, #12/2, #10/2, #10/3. Snap-In, no screws or locknuts required. In a dry location, use to connect non-metallic sheathed cable to a steel outlet box or other metal enclosure. Design allows for two-step installation. Push into box and insert cable. UL Approved, CSA certified.
Halex 90421 Squeeze Connector Raco 791 Mud-Ring Flat Square Electrical Box Cover Hubbell 8778 Square Raised Device Box Cover
Zinc die cast. In a dry location, use to connect flexible metallic conduit (Greenfield or BX) to steel outlet box, load center or other metal enclosure. Fits 1/2" knock outs. UL Approved. Steel box cover, 4", used to mount two switches or receptacles. UL Listed. Used to close outlet box. For mounting switches or receptacles. Size 4", UL Listed.
Halex 75403 Anti-Short Conduit Bushing Halex 12210B Concrete Tight Set Screw Coupling Despard K1I 1-Hole Standard Wall Plate
High dielectric plastic. Use to protect wire within flexible metallic conduit (Greenfield, BX). Insert one bushing at each end of conduit. UL Approved. No. 75400 - Fits cable range: 14/2, 14/3, 12/2 No. 75401 - Fits cable range: 14/4, 12/3, 6/1, 4/1. No. 75402 - Fits cable range: 12/4, 10/2, 10/3, 2/1. No. 75403 - Fits cable range: 10/4, 8/2, 8/3, 1/1. No. 75404 - Fits cable range: 8/4, 6/2, 6/3, 4/2, 4/3, 6/4. Zinc die cast. Use to join two lengths of EMT conduit together. UL Approved. Switch plate with horizontal one opening, two opening and three opening sizes. Older style device with a rounded shape that is slightly flattened top and bottom. Interchangeable, supplied with mounting straps. Flexible, smaller than a standard duplex receptacle device, fits in a smaller opening. Used in locations with limited space or restricted options. Openings are 11/16" high x 29/32" wide. UL Listed, CSA Certified.
Despard K3I 3-Hole Standard Wall Plate Despard K2I 2-Hole Standard Wall Plate MUD RING 4SQ SINGLE RAISED 3/4
Switch plate with horizontal one opening, two opening and three opening sizes. Older style device with a rounded shape that is slightly flattened top and bottom. Interchangeable, supplied with mounting straps. Flexible, smaller than a standard duplex receptacle device, fits in a smaller opening. Used in locations with limited space or restricted options. Openings are 11/16" high x 29/32" wide. UL Listed, CSA Certified. Switch plate with horizontal one opening, two opening and three opening sizes. Older style device with a rounded shape that is slightly flattened top and bottom. Interchangeable, supplied with mounting straps. Flexible, smaller than a standard duplex receptacle device, fits in a smaller opening. Used in locations with limited space or restricted options. Openings are 11/16" high x 29/32" wide. UL Listed, CSA Certified. Used to close outlet box. For mounting switch or receptacle. Size 4" x 4",steel, UL Listed.
Halex 90702 Conduit Chase Nipple CONNECTOR DPLX FLX N-MTL 3/8IN Halex 91531 Combination Coupling
Zinc die cast. Indoor or outdoor applications. Use to terminate threaded conduit to a knockout box or enclosure, where space within the box is limited. Used with a locknut to provide a short raceway between boxes or enclosures. UL and CSA approved. In a dry location, use to connect two pieces of flexible armored cable (Greenfield or BX) to a steel outlet box or other metal enclosure, when using only one knock-out opening. UL Approved. Zinc die cast. Use to join EMT conduit to flexible metal conduit. Indoor use only. With UPC. UL Approved.
Halex 90513 Twin Screw Clamp Connector Raco 8769 Mud-Ring Raised Square Electrical Box Cover Halex 90422 Squeeze Connector
Fits non metallic cable number 14/2 to number 6/3 AWG or number 3/10/3 AWG or flex cord .450 to .730 inches diameter. With a 1/2" knockout. In a dry location, use to connect nonmetallic sheathed cable to a steel outlet box or other metal enclosure. UL Listed, meets CSA requirements. Used to close outlet box. For mounting switches or receptacles. Size 4", UL Listed. Zinc die cast. In a dry location, use to connect flexible metallic conduit (Greenfield or BX) to steel outlet box, load center or other metal enclosure. Fits 1/2" knock outs. UL Approved.
WALLPLATE 2-TOG DECO LT ALM 3G Halex 20511 Twin Screw Clamp Connector Arrow Hart 2173 Combination Decorative Standard Wall Plate
Molded from non-flammable thermoset. Flush fitting, warp resistant design. Matching screws provided. High gloss finish is soil resistant. Standard size - 4.50" x 6.375", boxed. Fits 1/2" knockout, non-metallic cable numbers 14/2, 12/2, 12/3 AWG or 2 number 14/2 AWG or flex cord .300 to .560 inches diameter. In a dry location, use to connect nonmetallic sheathed cable to a steel outlet box or other metal enclosure. UL, Listed, meets CSA requirements. Molded from non-flammable thermoset. Flush fitting, warp resistant design. Matching screws provided. High gloss finish is soil resistant. Standard size - 4.50" x 6.375", boxed.
Halex 91101 Conduit Elbow Arrow Hart 2173 Combination Decorative Standard Wall Plate Hubbell 907C Square Exposed Work Cover
Zinc die cast. In a dry location, use to connect flexible metallic conduit (Greenfield or BX) to a steel outlet box or other metal enclosure. Molded from non-flammable thermoset. Flush fitting, warp resistant design. Matching screws provided. High gloss finish is soil resistant. Standard size - 4.50" x 6.375", boxed. Used to mount two duplex receptacles on a box in surface mount application. Raised 1/2". 6-1/2 cubic inch capacity. 4" square. UL Listed.
Halex 96401 Conduit Coupling Halex 03705B Concrete Tight Set Screw Conduit Offset Halex 90371 Concrete Tight Set Screw Conduit Offset
Steel, indoor or out. Use to join threaded Rigid or IMC conduit together. UL Listed. Zinc die cast. Use to connect EMT conduit to a metal outlet box or enclosure where an offset is desired. UL Approved. Zinc die cast. Use to connect EMT conduit to a metal outlet box or enclosure where an offset is desired. UL Approved.
Halex 16407B Box Spacer Raco 729 Flat Octagon Electrical Box Cover Hubbell 902C Square Raised Exposed Work Cover
Zinc die cast. Use as a raceway between two steel outlet boxes or other metal enclosures. UL Listed. Bulk packed. Steel box cover for single toggle switch. Key hole mounting feature allows for installation of cover without removing box screws. UL Listed. For one duplex receptacle. Raised 1/2". 6-1/2 cubic inch capacity. 4" square. UL Listed.
Raco 8779 Mud-Ring Raised Square Electrical Box Cover Halex 90514 Twin Screw Clamp Connector Cooper BP231B-SP Wall Plate Screw
Used to close outlet box. For mounting switches or receptacles. Size 4", UL Listed. Fits non metallic cable number 6/3 to number 2/3 AWG flex cord .800 to 1.350 inches diameter or SE cable 3 conductor or 3 number 1/0 minimum; 3 conductor or 3 number 2/0 maximum. With 1/2" knockout. In a dry location, use to connect nonmetallic sheathed cable to a steel outlet box or other metal enclosure. UL Listed, meets CSA requirements. Colors to match wall plates. 6/32" x 1/2". UL Listed.
Cooper BP231W-SP Wall Plate Screw Cooper BP231V-SP Wall Plate Screw Hubbell 833 Square Flat Electrical Box Cover
Colors to match wall plates. 6/32" x 1/2". UL Listed. Colors to match wall plates. 6/32" x 1/2". UL Listed. Steel box cover with single 1/2" knockout in the center. 4-11/16" square. UL Listed.
Hubbell 803C Square Exposed Work Cover Raco 800C Raised Square Exposed Work Cover Carlon E980CN-CAR Blank Weatherproof Cover
Raised 1/2". For two toggle switches. 6-1/2 cubic inch capacity. UL Listed. Used to mount one toggle switch on box in surface mount applications. Raised 1/2". 6-1/2 cubic inch capacity. UL Listed. Fits Carlon single gang FS boxes. Paintable surface with textured finish to hide scratches. Stainless steel mounting screws and gasket included. UL, CSA Listed.
Halex 75400 Anti-Short Conduit Bushing Raco 915C Raised Square Exposed Work Cover Raco 809C Raised Square Exposed Work Cover
High dielectric plastic. Use to protect wire within flexible metallic conduit (Greenfield, BX). Insert one bushing at each end of conduit. UL Approved. No. 75400 - Fits cable range: 14/2, 14/3, 12/2 No. 75401 - Fits cable range: 14/4, 12/3, 6/1, 4/1. No. 75402 - Fits cable range: 12/4, 10/2, 10/3, 2/1. No. 75403 - Fits cable range: 10/4, 8/2, 8/3, 1/1. No. 75404 - Fits cable range: 8/4, 6/2, 6/3, 4/2, 4/3, 6/4. For one GFCI receptacle and one duplex receptacle. 6.5 cubic inch capacity. UL Listed, CSA Listed. For two GFCI receptacles. 6.5 cubic inch capacity. UL Listed, CSA Listed.
Raco 906C Surface Mount Exposed Work Cover Arrow Hart STC1V Mid Size Wall Plate Arrow Hart STC1W Mid Size Wall Plate
For one each duplex receptacle and toggle switch. 4" square. Raised 1/2". 6.5 cubic inch capacity. UL Listed. Center Plate. Thermoplastic construction for durability and flexibility. Easy to snap together and lock. Mid-size design to fit over most existing wall openings. Screw-Catch feature holds already attached mounting screws captive for easy installation. Screws are slotted steel, baked enamel and painted. Meets current Federal specifications as tested to UL 514. Meets all CSA requirements C22.2, No. 42.1., CSA file #9294 (4413-02), UL and cUL Listed, UL File #E33216. NEMA WD-1, WD-6. Temperature rating -40 degrees C to 65 degrees C. Center Plate. Thermoplastic construction for durability and flexibility. Easy to snap together and lock. Mid-size design to fit over most existing wall openings. Screw-Catch feature holds already attached mounting screws captive for easy installation. Screws are slotted steel, baked enamel and painted. Meets current Federal specifications as tested to UL 514. Meets all CSA requirements C22.2, No. 42.1., CSA file #9294 (4413-02), UL and cUL Listed, UL File #E33216. NEMA WD-1, WD-6. Temperature rating -40 degrees C to 65 degrees C.
Arrow Hart STE14W Blank Mid Size Wall Plate Arrow Hart 93151-BOX Blank Standard Wall Plate Arrow Hart STE1W Mid Size Wall Plate
End plate, blank strap mount with metal yoke. High gloss finish. Thermoplastic construction for durability and flexibility. Easy to snap together and lock. Mid-size design to fit over most existing wall openings. Screw-Catch feature holds already attached mounting screws captive for easy installation. Screws are slotted steel, baked enamel and painted.  Meets current Federal specifications as tested to UL 514 (file no. E33216). Meets CSA standard C22.2, No. 42.1, (file no.9294). NEMA WD-1, WD-6. Meets flammability requirements per UL 94, V2 rated. Temperature rating -40 degrees C to 70 degrees C. Made of Type 302/304 stainless steel for superior non-magnetic corrosion-resistant properties. Horizontally satin-brushed surface finish resists fingerprints. Matching stainless steel mounting screws provided. Plates are 0.032" thick. Meets all UL and CSA requirements. End plate. Single toggle. Decorator style. High gloss finish. Thermoplastic construction for durability and flexibility. Easy to snap together and lock. Mid-size design to fit over most existing wall openings. Screw-catch feature holds already attached mounting screws captive for easy installation. Screws are slotted steel, baked enamel and painted. Meets current Federal specifications as tested to UL 514. Temperature rating -40 degrees C to 70 degrees C. UL Listed, meets CSA standard. NEMA WD-1, WD-6.
Arrow Hart STE1V Mid Size Wall Plate Arrow Hart STE14V Blank Mid Size Wall Plate Halex 96402 Conduit Coupling
End plate. Single toggle. Decorator style. High gloss finish. Thermoplastic construction for durability and flexibility. Easy to snap together and lock. Mid-size design to fit over most existing wall openings. Screw-catch feature holds already attached mounting screws captive for easy installation. Screws are slotted steel, baked enamel and painted. Meets current Federal specifications as tested to UL 514. Temperature rating -40 degrees C to 70 degrees C. UL Listed, meets CSA standard. NEMA WD-1, WD-6. End plate, blank strap mount with metal yoke. High gloss finish. Thermoplastic construction for durability and flexibility. Easy to snap together and lock. Mid-size design to fit over most existing wall openings. Screw-Catch feature holds already attached mounting screws captive for easy installation. Screws are slotted steel, baked enamel and painted.  Meets current Federal specifications as tested to UL 514 (file no. E33216). Meets CSA standard C22.2, No. 42.1, (file no.9294). NEMA WD-1, WD-6. Meets flammability requirements per UL 94, V2 rated. Temperature rating -40 degrees C to 70 degrees C. Steel, indoor or out. Use to join threaded Rigid or IMC conduit together. UL Listed.
Arrow Hart STC14V Blank Mid Size Wall Plate Arrow Hart STC14W Blank Mid Size Wall Plate Halex 90452 Screw-In Coupling
Center plate, blank strap mount with metal yoke. High gloss finish. Thermoplastic construction for durability and flexibility. Easy to snap together and lock. Mid-size design to fit over most existing wall openings. Screw-Catch feature holds already attached mounting screws captive for easy installation. Screws are slotted steel, baked enamel and painted. Meets current Federal specifications as tested to UL 514 (file no. E33216). Meets CSA standard C22.2, No. 42.1, (file no.9294). NEMA WD-1, WD-6. Meets flammability requirements per UL 94, V2 rated. Temperature rating -40 degrees C to 70 degrees C. Center plate, blank strap mount with metal yoke. High gloss finish. Thermoplastic construction for durability and flexibility. Easy to snap together and lock. Mid-size design to fit over most existing wall openings. Screw-Catch feature holds already attached mounting screws captive for easy installation. Screws are slotted steel, baked enamel and painted. Meets current Federal specifications as tested to UL 514 (file no. E33216). Meets CSA standard C22.2, No. 42.1, (file no.9294). NEMA WD-1, WD-6. Meets flammability requirements per UL 94, V2 rated. Temperature rating -40 degrees C to 70 degrees C. Zinc die cast. Use to join two pieces of flexible metallic conduit (Greenfield) together.
Halex 12112 Concrete Tight Set Screw Connector Halex 11005B Conduit Elbow Halex 21210 Concrete Tight Set Screw Connector
Zinc die cast. Use to connect EMT conduit to steel outlet box, load center or other metal enclosure. UL Approved. Zinc die cast. In a dry location, use to connect flexible metallic conduit (Greenfield or BX) to a steel outlet box or other metal enclosure. Zinc die cast. Use to connect EMT conduit to steel outlet box, load center or other metal enclosure. UL Approved.
Carlon CPC4WH Blank Round Flat Outlet Box Cover Raco 808C Raised Square Exposed Work Cover Halex 90703 Conduit Chase Nipple
Non-metallic white ceiling box cover, flat and blank. 4" diameter. UL Listed. Raised 1/2". Used to support switches or receptacles independent of the box (box must still be used). 6.5 cubic inches. UL Listed. Zinc die cast. Indoor or outdoor applications. Use to terminate threaded conduit to a knockout box or enclosure, where space within the box is limited. Used with a locknut to provide a short raceway between boxes or enclosures. UL and CSA approved.
Halex 03707B Concrete Tight Set Screw Conduit Offset Halex 12212 Concrete Tight Set Screw Coupling Halex 20581 Cable Connector
Zinc die cast. Use to connect EMT conduit to a metal outlet box or enclosure where an offset is desired. UL Approved. Zinc die cast. Use to join two lengths of EMT conduit together. UL Approved. In a dry location, use to connect AC (BX) cable to a steel outlet box or other metal enclosure. Suitable for #14-2 steel armored cable.
Raco 810C Raised Square Exposed Work Cover Halex 75401 Anti-Short Conduit Bushing Halex 64010 Conduit Coupling
Used to mount switches or receptacles on boxes in surface mount applications. Raised 1/2". For one 30-50 amp, single receptacle, 2.141" diameter. 6-1/2 cubic inch capacity. 4" square. UL Listed. High dielectric plastic. Use to protect wire within flexible metallic conduit (Greenfield, BX). Insert one bushing at each end of conduit. UL Approved. No. 75400 - Fits cable range: 14/2, 14/3, 12/2 No. 75401 - Fits cable range: 14/4, 12/3, 6/1, 4/1. No. 75402 - Fits cable range: 12/4, 10/2, 10/3, 2/1. No. 75403 - Fits cable range: 10/4, 8/2, 8/3, 1/1. No. 75404 - Fits cable range: 8/4, 6/2, 6/3, 4/2, 4/3, 6/4. Steel, indoor or out. Use to join threaded Rigid or IMC conduit together. UL Listed.
Halex 90372 Concrete Tight Set Screw Conduit Offset Halex 91102 Pull Conduit Elbow Carlon E365C-CAR Blank Round Weatherproof Cover
Zinc die cast. Use to connect EMT conduit to a metal outlet box or enclosure where an offset is desired. UL Approved. Zinc die cast. In a dry location, use to connect flexible metallic conduit (Greenfield or BX) to a steel outlet box or other metal enclosure. Round non-metallic gray weatherproof cover. Fits T boxes.
Arrow Hart 93111-BOX Standard Wall Plate Halex 27519 Hit Lock Cable Connectors Arrow Hart 93091-BOX Standard Wall Plate
Made of Type 304 stainless steel alloy for superior non-magnetic corrosion-resistant properties. Plates are 0.032" thick. Brushed satin finish resists fingerprints. Matching stainless steel mounting screws provided. Standard size - 2.75" x 4.50", with 1.594" hole. Fits NM Cable: #14/2, #14/3, #12/2, #10/2, #10/3. Snap-In, no screws or locknuts required. In a dry location, use to connect non-metallic sheathed cable to a steel outlet box or other metal enclosure. Design allows for two-step installation. Push into box and insert cable. UL Approved, CSA certified. Made of Type 304 stainless steel alloy for superior non-magnetic corrosion-resistant properties. Plates are 0.032" thick. Brushed satin finish resists fingerprints. Matching stainless steel mounting screws provided. Standard size - 2.75" x 4.50", with 1.406" hole, boxed.
Halex 75402 Anti-Short Conduit Bushing Carlon E9802CN-CAR Blank Square Weatherproof Cover Halex 07012 Conduit Chase Nipple
High dielectric plastic. Use to protect wire within flexible metallic conduit (Greenfield, BX). Insert one bushing at each end of conduit. UL Approved. No. 75400 - Fits cable range: 14/2, 14/3, 12/2 No. 75401 - Fits cable range: 14/4, 12/3, 6/1, 4/1. No. 75402 - Fits cable range: 12/4, 10/2, 10/3, 2/1. No. 75403 - Fits cable range: 10/4, 8/2, 8/3, 1/1. No. 75404 - Fits cable range: 8/4, 6/2, 6/3, 4/2, 4/3, 6/4. UV resistant, suitable for outdoor use. For use in wet or damp locations, UL Marine Listed. Non-metallic, non-corrosive, will not rust or fade. Fits two gang metallic and non metallic boxes. Includes stainless steel mounting screws and gasket. UL Listed. Zinc die cast. Indoor or outdoor applications. Use to terminate threaded conduit to a knockout box or enclosure, where space within the box is limited. Used with a locknut to provide a short raceway between boxes or enclosures. UL and CSA approved.
Halex 12215 Concrete Tight Set Screw Coupling Raco 780 Mud-Ring Raised Square Electrical Box Cover Halex 14405 Pull Conduit Elbow
Zinc die cast. Use to join two lengths of EMT conduit together. UL Approved. Used to close outlet box. For mounting switches or receptacles. Size 4", UL Listed. Zinc die cast. Removable steel cover facilitates wire pulling. Use to connect EMT conduit together at a 90 degree bend. Tray box.
Halex 05115 Twin Screw Clamp Connector Halex 12115 Concrete Tight Set Screw Connector AmerTac 935TAL Wall Plate
Fits non metallic cable, flex cords, multi flex cords; fitting range .834 - 1.520 inches diameter SE cables 2 conductor 4/0. With 1/2" knockout. In a dry location, use to connect nonmetallic sheathed cable to a steel outlet box or other metal enclosure. UL Listed, meets CSA requirements. Tray boxed. Zinc die cast. Use to connect EMT conduit to steel outlet box, load center or other metal enclosure. UL Approved. With screws. 5" height x 2-3/4" width x 1/4" depth.
AmerTac 935TW Rectangular Wall Plate Halex 64012 Conduit Coupling Arrow Hart PJS1 Mid Size Screw less Wall Plate
With screws. 5" height x 2-3/4" width x 1/4" depth. Steel, indoor or out. Use to join threaded Rigid or IMC conduit together. UL Listed. Screwless mid-size switch plate wall plates are virtually unbreakable and present a clean, minimalist look that can be changed in seconds. Easy installation, simply screw the mounting plate onto the wiring device and press into place.
Arrow Hart PJS1 Mid Size Screw less Wall Plate Halex 94105 Pull Conduit Elbow with Neoprene Gasket Halex 21212 Concrete Tight Set Screw Connector
Screwless mid-size switch plate wall plates are virtually unbreakable and present a clean, minimalist look that can be changed in seconds. Easy installation, simply screw the mounting plate onto the wiring device and press into place. Zinc die cast. Indoors or outdoors. Use as a wire pulling elbow to facilitate wire pulling through a sharp bend in a run of threaded Rigid or IMC conduit. Removable cover provides easy access to wiring. UL Approved. Bulk packed. Zinc die cast. Use to connect EMT conduit to steel outlet box, load center or other metal enclosure. UL Approved.
Halex 26512 2-Piece Butterfly Clamp Connector Halex 58305 Rigid Threaded Conduit Body with Cover and Gasket Halex 58405 Rigid Threaded Conduit Body with Cover and Gasket
Zinc die cast. In a dry location, use to secure #14 - #10 non-metallic sheathed cable to steel outlet box or other metal enclosure. No locknut required. Aluminum, indoors or outdoors. Use to gain access to the interior of a raceway for wire pulling, splicing (with limitations as specified by the NEC), and maintenance. With cover and gasket. UL Approved. Tray boxed. Copper-free die cast aluminum. Indoors or outdoors. Use to gain access to the interior of a raceway for wire pulling, splicing (with limitations as specified by the NEC), and maintenance. With cover and gasket. UL Approved. Tray boxed.
Halex 58605 Rigid Threaded Conduit Body with Cover and Gasket Arrow Hart 39CH-BOX Wall Plate Halex 12120 Concrete Tight Set Screw Connector
Aluminum, indoor or outdoor. Use to gain access to the interior of a raceway for wire pulling, splicing (with limitations as specified by the NEC), and maintenance. With cover and gasket. UL Approved. Full gauge and size beveled-edge; furnished with mounting screws. Fit 1253, 1254 and 1263 flush receptacles. Standard size - 2.75" x 4.50", boxed. Zinc die cast. Use to connect EMT conduit to steel outlet box, load center or other metal enclosure. UL Approved.
Halex 58905 Rigid Threaded Conduit Body with Cover and Gasket Arrow Hart Eagle 69-BOX Standard Wall Plate Halex 14407 Pull Conduit Elbow
Aluminum, indoor or outdoor. Use to gain access to the interior of a raceway for wire pulling, splicing (with limitations as specified by the NEC), and maintenance. With cover and gasket. UL Approved. Tray boxed. Fits 1257 and 1258 flush receptacles. Zinc die cast. Removable steel cover facilitates wire pulling. Use to connect EMT conduit together at a 90 degree bend. Tray box.
Arrow Hart Eagle 68-BOX Standard Wall Plate Halex 07015 Conduit Chase Nipple Halex 12220 Concrete Tight Set Screw Coupling
Standard size two gang metal wallplate for power devices using a 2.1563" single opening. Zinc die cast. Indoor or outdoor applications. Use to terminate threaded conduit to a knockout box or enclosure, where space within the box is limited. Used with a locknut to provide a short raceway between boxes or enclosures. UL and CSA approved. Zinc die cast. Use to join two lengths of EMT conduit together. UL Approved.
Halex 59505 Service Entrance Elbow Halex 20491 Combination Coupling Halex 05120 Twin Screw Clamp Connector
Copper-free die cast aluminum. Use to gain access to the interior of a raceway for wire pulling, inspection and maintenance. UL Approved. Tray boxed. Use to joint EMT conduit to flexible metal conduit. Die cast zinc. UL Approved, CSA Certified. Fits non metallic cable, flex cords, multi flex cords fitting range 1.085 - 1.520 inches diameter. With 1/2" knockout. In a dry location, use to connect nonmetallic sheathed cable to a steel outlet box or other metal enclosure. UL Listed, meets CSA requirements. Tray boxed.
Halex 04010 Offset Nipple Halex 20510 Twin Screw Clamp Connector Atron 163TBR Square Corner Traditional Wall Plate
Zinc die cast. Use as an offset connector between two enclosures. Offsets the axis of the raceway 3/4". UL Approved. Fits 1/2" knockout, non-metallic cable numbers 14/2, 12/2, 12/3 AWG or 2 number 14/2 AWG or flex cord .300 to .560 inches diameter. In a dry location, use to connect nonmetallic sheathed cable to a steel outlet box or other metal enclosure. UL, Listed, meets CSA requirements. Traditional square corner design. With screws.
AmerTac 161T Wall Plate Halex 64015 Conduit Coupling Halex 58805 Rigid Threaded Conduit Body with Cover and Gasket
Traditional square corner design. With screws. 5" height x 2-7/8" width x 1/4" depth. Steel, indoor or out. Use to join threaded Rigid or IMC conduit together. UL Listed. Copper-free die cast aluminum. Indoors or outdoors. Use to gain access to the interior of a raceway for wire pulling, splicing (with limitations as specified by the NEC), and maintenance. UL Approved. Tray boxed.
Halex 94107 Pull Conduit Elbow Halex 21642 Box Spacer Halex 21222 Concrete Tight Set Screw Coupling
Zinc die cast. Indoors or outdoors. Use as a wire pulling elbow to facilitate wire pulling through a sharp bend in a run of threaded Rigid or IMC conduit. Removable cover provides easy access to wiring. UL Approved. Bulk packed. Die cast of high strength corrosion resistant zinc alloy. Locknut is reversible. It is designed to cut through protective coatings on boxes and enclosures to assure ground continuity. Use as a raceway between two steel outlet boxes or other metal enclosures. UL and CSA Listed. Zinc die cast. Use to join two lengths of EMT conduit together. UL Approved.
Halex 20512 Twin Screw Clamp Connector Halex 64105 Conduit Elbow AmerTac 935TTW Wall Plate
Fits non metallic cable, such as Romex, number 14/2 round, number 12/3-8/3 AWG or flex cord .460 to .720 inches diameter. In a dry location, use to connect nonmetallic sheathed cable to a steel outlet box or other metal enclosure. UL Listed, meets CSA requirements. Use to allow a 90 degree change of direction in a run of Rigid or IMC conduit. UL Listed. With screws. 5" height x 4-5/8" width x 1/4" depth.
Arrow Hart PJ1EMRD Mid Size Wall Plate Arrow Hart Eagle 2168 Standard Wall Plate Halex 26571 Flexible MC Snap-In Connector
Molded from non-flammable Polycarbonate, pre-marked "EMERGENCY" with indelible printing guaranteed not to fade, bleed or rub off. High letters for easy identification. Virtually unbreakable, with high structural rigidity, long-term form retention and superior impact and abrasion resistance. Screw-catch feature holds mounting screws captive and simplifies installation. Matching screws provided. High gloss finish is soil resistant. Mid-size - 3.125" x 4.875". Screw-catch feature holds mounting screws captive and simplifies installation. Matching mounting screws provided. Halex MC Snap-In Connector, Flexible, 3/8 in Nominal, Steel, Includes: Insulating Bushing, CSA Certified, UL Listed, For use to connect aluminum or steel ac, aluminum mc, and steel flexible metal conduit, indoor use only
Halex 14605 Inside Corner Pull Conduit Elbow Halex 21211 Concrete Tight Set Screw Connector Halex 64320 Conduit Nipple
Zinc die-cast. Removable steel cover facilitates wire pulling. Use to connect EMT conduit together at an inside corner. UL listed, CSA Approved. Tray boxed. Zinc die cast. Use to connect EMT conduit to steel outlet box, load center or other metal enclosure. UL Approved. Made of steel, fully threaded. Indoor or outdoor. Use to connect two steel outlet boxes or other metal enclosures or to extend a length of threaded Rigid or IMC conduit. Bulk packed.
Amerelle Century 1-Toggle Wall Plate Arrow Hart PJS2 Mid Size Screw less Wall Plate Arrow Hart PJS2 Mid Size Screw less Wall Plate
Amerelle Wall Plate, 1-Toggle, Series: Century, 4-15/16 in Length, 4-9/16 in Width, 1 Gangs, Stamped Steel, Brushed Nickel, Screw Mounting, Includes: Matching Screws, UL Listed Screwless mid-size toggle wall plate, virtually unbreakable, clips easily into place with gentle pressure. Features clean appearance with no visible mounting hardware. Works with standard toggle switches. Molded from non-flammable Polycarbonate, with high structural rigidity, long-term form retention and superior impact and abrasion resistance. Screwless mid-size toggle wall plate, virtually unbreakable, clips easily into place with gentle pressure. Features clean appearance with no visible mounting hardware. Works with standard toggle switches. Molded from non-flammable Polycarbonate, with high structural rigidity, long-term form retention and superior impact and abrasion resistance.
Atron 163TTBR Traditional Wall Plate Halex 21221 Concrete Tight Set Screw Coupling Halex 04212 Squeeze Connector
Traditional square corner design. With screws. 5" height x 4-3/4" width x 1/4" depth. Zinc die cast. Use to join two lengths of EMT conduit together. UL Approved. Zinc die cast. In a dry location, use to connect flexible metallic conduit (Greenfield or BX) to steel outlet box, load center or other metal enclosure. Fits 1/2" knock outs. UL Approved.
Raco 878 Utility Exposed Work Cover Halex 58907 Rigid Threaded Conduit Body with Cover and Gasket Halex 04012 Offset Nipple
Used to mount switches or receptacles on boxes in surface mount applications. Raised 1/2". For one 30-50 amp, single receptacle 2.141" diameter. 10.3 cubic inch capacity. UL Listed. Aluminum, indoor or outdoor. Use to gain access to the interior of a raceway for wire pulling, splicing (with limitations as specified by the NEC), and maintenance. With cover and gasket. UL Approved. Tray boxed. Zinc die cast. Use as an offset connector between two enclosures. Offsets the axis of the raceway 3/4". UL Approved.
Halex 58607 Rigid Threaded Conduit Body with Cover and Gasket Halex 58307 Rigid Threaded Conduit Body with Cover and Gasket Halex 58407 Rigid Threaded Conduit Body with Cover and Gasket
Aluminum, indoor or outdoor. Use to gain access to the interior of a raceway for wire pulling, splicing (with limitations as specified by the NEC), and maintenance. With cover and gasket. UL Approved. Aluminum, indoors or outdoors. Use to gain access to the interior of a raceway for wire pulling, splicing (with limitations as specified by the NEC), and maintenance. With cover and gasket. UL Approved. Tray boxed. Copper-free die cast aluminum. Indoors or outdoors. Use to gain access to the interior of a raceway for wire pulling, splicing (with limitations as specified by the NEC), and maintenance. With cover and gasket. UL Approved. Tray boxed.
First Alert FG200 Battery Operated Smoke Alarm Halex 07020 Conduit Chase Nipple Halex 64107 Conduit Elbow
Battery operated ionization smoke alarm with test button, 9 volt battery included. Ionization smoke sensors are generally more sensitive at detecting small particles, which tend to be produced in greater amounts by flaming fires. Beeping signal warns when the battery needs replacing. Hinged cover for easy battery replacement. Meets ANSI/UL217 standard. 3-year limited warranty. Zinc die cast. Indoor or outdoor applications. Use to terminate threaded conduit to a knockout box or enclosure, where space within the box is limited. Used with a locknut to provide a short raceway between boxes or enclosures. UL and CSA approved. Use to allow a 90 degree change of direction in a run of Rigid or IMC conduit. UL Listed.
Halex 59507 Service Entrance Elbow Atron 161TT Traditional Wall Plate Raco 888 Raised Square Exposed Work Cover
Copper-free die cast aluminum. Use to gain access to the interior of a raceway for wire pulling, inspection and maintenance. UL Approved. Tray boxed. Traditional square corner design. With screws. 5" height x 4-3/4" width x 1/4" depth. Used to mount switch or receptacle on box in surface mount applications. Raised 1/2". For one 30-60 amp, single receptacle 2.625" diameter. 10.3 cubic inches. UL Listed.
First Alert FG250B Battery Operated Smoke Alarm Amerelle 1-Toggle Wall Plate Halex 58807 Rigid Threaded Conduit Body with Cover and Gasket
Battery operated, RV approved, ionization smoke alarm with lighted power and alarm indicator, 9 volt battery included. With silence feature. Ionization smoke sensors are generally more sensitive at detecting small particles, which tend to be produced in greater amounts by flaming fires. Tamper resistant locking pin. Hinged cover for easy battery replacement. Meets ANSI/UL217 standard. Amerelle Wall Plate, 1-Toggle, Series: Contemporary, 5-1/4 in Length, 3 in Width, 1 Gangs, Oak Wood, Light, Screw Mounting, Includes: Matching Screws, UL Listed Copper-free die cast aluminum. Indoors or outdoors. Use to gain access to the interior of a raceway for wire pulling, splicing (with limitations as specified by the NEC), and maintenance. UL Approved. Tray boxed.
Arrow Hart PJS3 Mid Size Screw less Wall Plate AmerTac 935TTAL Wall Plate Halex 14607 Inside Corner Pull Conduit Elbow
Screwless mid-size toggle wall plate, virtually unbreakable, clips easily into place with gentle pressure. Features clean appearance with no visible mounting hardware. Works with standard toggle switches. Molded from non-flammable Polycarbonate, with high structural rigidity, long-term form retention and superior impact and abrasion resistance. With screws. 5" height x 4-5/8" width x 1/4" depth. Zinc die-cast. Removable steel cover facilitates wire pulling. Use to connect EMT conduit together at an inside corner. UL listed, CSA Approved. Tray boxed.
Amerelle Century 2-Toggle Wall Plate AmerTac Continental 94TBB Rectangular Wall Plate Amerelle Metro Line 1-Toggle Wall Plate
Amerelle Wall Plate, 2-Toggle, Series: Century, 4-15/16 in Length, 4-9/16 in Width, 2 Gangs, Stamped Steel, Brushed Nickel, Screw Mounting, Includes: Matching Screws, UL Listed With screws. 5" height x 3" width x 1/4" depth. Amerelle Wall Plate, 1-Toggle, Series: Metro Line, 4-7/8 in Length, 3 in Width, 1 Gangs, Cast Metal, Brushed Nickel, Screw Mounting, Includes: Matching Screws, UL Listed
Halex 20492 Combination Coupling Halex 64020 Conduit Coupling Amerelle Chelsea 1-Toggle Wall Plate
Use to joint EMT conduit to flexible metal conduit. Die cast zinc. UL Approved, CSA Certified. Steel, indoor or out. Use to join threaded Rigid or IMC conduit together. UL Listed. Amerelle Wall Plate, 1-Toggle, Series: Chelsea, 4-7/8 in Length, 3-1/8 in Width, 1 Gangs, Stamped Steel, Brushed Nickel, Screw Mounting, Includes: Matching Screws, UL Listed
Amerelle 1-Toggle Wall Plate