Home > ELECTRICAL > SPECIALTY ELECTRICAL > DOORBELLS & CHIMES > DOORBELLS, CHIMES - SMART/WIFI
Sort By:
1
WALLPLATE RECEPTACLE DUPLEX 1G WALLPLATE TEL/COAX LT ALM 1G  Arrow Hart 2128V-BOX Standard Wall Plate
Flush fitting, warp resistant design. Screw-catch feature holds mounting screws captive. Matching screws provided. High gloss finish is soil resistant. Standard size - 2.75" x 4.50". Molded from non-flammable thermoset. Flush fitting, warp resistant design. Matching screws provided. High gloss finish is soil resistant. Standard size - 2.75" x 4.50". Molded from non-flammable thermoset. Flush fitting, warp resistant design. Matching screws provided. High gloss finish is soil resistant. Standard size - 2.75" x 4.50".
Arrow Hart 2151W-BOX Decorator Wall Plate Arrow Hart 2151V-BOX Decorator Wall Plate Arrow Hart 2151 Decorative Standard Wall Plate
Molded from non-flammable thermoset. Flush fitting, warp resistant design. Matching screws provided. High gloss finish is soil resistant. Standard size - 2.75" x 4.50", boxed. Molded from non-flammable thermoset. Flush fitting, warp resistant design. Matching screws provided. High gloss finish is soil resistant. Standard size - 2.75" x 4.50", boxed. Molded from non-flammable thermoset. Flush fitting, warp resistant design. Matching screws provided. High gloss finish is soil resistant. Standard size - 2.75" x 4.50", boxed.
WALLPLATE DECO 1G             WALLPLATE BLANK 1G LA         WALLPLATE PHONE/COAX LT ALM 1G
WALLPLATE DECO 1G
Our Price: $0.58
WALLPLATE BLANK 1G LA
Our Price: $0.62
Molded from non-flammable thermoset. Flush fitting, warp resistant design. Matching screws provided. High gloss finish is soil resistant. Standard size - 2.75" x 4.50", boxed. Molded from non-flammable thermoset. Flush fitting, warp resistant design. Matching screws provided. High gloss finish is soil resistant. Boxed. Molded from non-flammable Polycarbonate. Virtually unbreakable, with high structural rigidity, long-term form retention and superior impact and abrasion resistance. Screw-catch feature holds mounting screws captive and simplifies installation. Matching screws provided. High gloss finish is soil resistant. Mid-size - 3.125" x 4.875". With .375" hole.
Arrow Hart PJ11V Mid Size Wall Plate Arrow Hart PJ11W Mid Size Wall Plate WALLPLATE DUPLEX 2G
WALLPLATE DUPLEX 2G
Our Price: $1.14
Molded from non-flammable Polycarbonate. Virtually unbreakable, with high structural rigidity, long-term form retention and superior impact and abrasion resistance. Screw-catch feature holds mounting screws captive and simplifies installation. Matching screws provided. High gloss finish is soil resistant. Mid-size - 3.125" x 4.875". With .375" hole. Molded from non-flammable Polycarbonate. Virtually unbreakable, with high structural rigidity, long-term form retention and superior impact and abrasion resistance. Screw-catch feature holds mounting screws captive and simplifies installation. Matching screws provided. High gloss finish is soil resistant. Mid-size - 3.125" x 4.875". With .375" hole. Molded from non-flammable thermoset. Flush fitting, warp resistant design. Screw-catch feature holds mounting screws captive and simplifies installation. Matching screws provided. High gloss finish is soil resistant. Standard size - 4.50" x 4.563", boxed.
Arrow Hart 2137 Blank Standard Wall Plate Arrow Hart 2137 Blank Standard Wall Plate WALLPLATE BLANK 2G LA
WALLPLATE BLANK 2G LA
Our Price: $1.27
Non-flammable, box mounted, flush fitting, warp resistant design. Matching screws provided. High gloss finish is soil resistant. Standard size - 4.50" x 4.563". Non-flammable, box mounted, flush fitting, warp resistant design. Matching screws provided. High gloss finish is soil resistant. Standard size - 4.50" x 4.563". Non-flammable, box mounted, flush fitting, warp resistant design. Matching screws provided. High gloss finish is soil resistant. Standard size - 4.50" x 4.563".
Arrow Hart 2152W-BOX Decorator Wall Plate Arrow Hart 2152V-BOX Decorator Wall Plate WALLPLATE ROCKER 2G
WALLPLATE ROCKER 2G
Our Price: $1.30
Molded from non-flammable thermoset. Flush fitting, warp resistant design. Matching screws provided. High gloss finish is soil resistant. Standard size - 4.50" x 4.563", boxed. Molded from non-flammable thermoset. Flush fitting, warp resistant design. Matching screws provided. High gloss finish is soil resistant. Standard size - 4.50" x 4.563", boxed. Molded from non-flammable thermoset. Flush fitting, warp resistant design. Matching screws provided. High gloss finish is soil resistant. Standard size - 4.50" x 4.563", boxed.
Hubbell 127 Octagon Box BOX OCTAGON 4IN 1-1/2IN DEEP  WALLPLATE RCPT LT ALMOND 2G
Two 1/2" and two 3/4" conduit knockouts (sides). Two 1/2" and two 3/4" conduit knockouts (bottom). No bracket. Can be used in the installation of ceiling or wall lighting fixtures or as a junction box. Not designed for ceiling fan support. 50 pound maximum recommended static load. Acceptable for use in 2-hour fire rated walls. UL Listed. UPC bar code. Four 1/2" conduit knockouts (sides). Four 1/2" conduit knockouts (bottom). No bracket. Used in the installation of ceiling or wall lighting fixtures or as a junction box. 1-1/2" deep, 15.5 cubic inch capacity. Not designed for ceiling fan support. 50 pound maximum recommended static load. Acceptable for use in 2-hour fire rated walls. UL Listed. UPC bar code. Molded from non-flammable nylon. Flush fitting, warp resistant design. Screw-catch feature holds mounting screws captive and simplifies installation. Matching screws provided. High gloss finish is soil resistant. 4.50" x 4.563".
Arrow Hart 2163W-BOX Decorator Wall Plate Arrow Hart 2163V-BOX Decorator Wall Plate WALLPLATE ROCKER 3G
WALLPLATE ROCKER 3G
Our Price: $1.88
Molded from non-flammable thermoset. Flush fitting, warp resistant design. Screw-catch feature holds mounting screws captive and simplifies installation. Matching screws provided. High gloss finish is soil resistant. Standard size - 4.50" x 6.375", boxed. Molded from non-flammable thermoset. Flush fitting, warp resistant design. Screw-catch feature holds mounting screws captive and simplifies installation. Matching screws provided. High gloss finish is soil resistant. Standard size - 4.50" x 6.375", boxed. Molded from non-flammable thermoset. Flush fitting, warp resistant design. Screw-catch feature holds mounting screws captive and simplifies installation. Matching screws provided. High gloss finish is soil resistant. Standard size - 4.50" x 6.375", boxed.
Hubbell 146 Octagon Box Cooper BP231B-SP Wall Plate Screw Cooper BP231W-SP Wall Plate Screw
With non-metallic sheathed cable clamps. Two 1/2" conduit knockouts and four cable knockouts, (sides). One 1/2" conduit knockout, (bottom). Used in the installation of ceiling or wall lighting fixtures or as a junction box. 1-1/2" deep, 15.5 cubic inch capacity. 50 pound maximum recommended static load. Not designed for ceiling fan support. Acceptable for use in 2-hour fire rated walls. UL Listed. UPC bar code. Colors to match wall plates. 6/32" x 1/2". UL Listed. Colors to match wall plates. 6/32" x 1/2". UL Listed.
Cooper BP231V-SP Wall Plate Screw Raco 110 Electrical Box Hubbell 130 Octagon Box Extension Ring
Colors to match wall plates. 6/32" x 1/2". UL Listed. Octagon box, 3-1/2" with four 1/2" side conduit knockouts and one 1/2" bottom conduit knockout. Drawn construction, can be used in the installation of ceiling or wall lighting fixtures or as a junction box. Not designed for ceiling fan support. 50 pound maximum recommended static load. 1-1/2" deep, 11.8 cubic inch capacity. UL Listed, acceptable for use in 2-hour fire rated walls. UPC bar code. Two 1/2" and two 3/4" conduit knockouts (sides). Extension rings provide a means for adding additional cubic capacity or as and outlet box for surface conduit.
Arrow Hart STC1V Mid Size Wall Plate Arrow Hart STC1W Mid Size Wall Plate Arrow Hart STE14W Blank Mid Size Wall Plate
Center Plate. Thermoplastic construction for durability and flexibility. Easy to snap together and lock. Mid-size design to fit over most existing wall openings. Screw-Catch feature holds already attached mounting screws captive for easy installation. Screws are slotted steel, baked enamel and painted. Meets current Federal specifications as tested to UL 514. Meets all CSA requirements C22.2, No. 42.1., CSA file #9294 (4413-02), UL and cUL Listed, UL File #E33216. NEMA WD-1, WD-6. Temperature rating -40 degrees C to 65 degrees C. Center Plate. Thermoplastic construction for durability and flexibility. Easy to snap together and lock. Mid-size design to fit over most existing wall openings. Screw-Catch feature holds already attached mounting screws captive for easy installation. Screws are slotted steel, baked enamel and painted. Meets current Federal specifications as tested to UL 514. Meets all CSA requirements C22.2, No. 42.1., CSA file #9294 (4413-02), UL and cUL Listed, UL File #E33216. NEMA WD-1, WD-6. Temperature rating -40 degrees C to 65 degrees C. End plate, blank strap mount with metal yoke. High gloss finish. Thermoplastic construction for durability and flexibility. Easy to snap together and lock. Mid-size design to fit over most existing wall openings. Screw-Catch feature holds already attached mounting screws captive for easy installation. Screws are slotted steel, baked enamel and painted.  Meets current Federal specifications as tested to UL 514 (file no. E33216). Meets CSA standard C22.2, No. 42.1, (file no.9294). NEMA WD-1, WD-6. Meets flammability requirements per UL 94, V2 rated. Temperature rating -40 degrees C to 70 degrees C.
Arrow Hart 93151-BOX Blank Standard Wall Plate Arrow Hart 93101-BOX Blank Standard Wall Plate Arrow Hart STE1W Mid Size Wall Plate
Made of Type 302/304 stainless steel for superior non-magnetic corrosion-resistant properties. Horizontally satin-brushed surface finish resists fingerprints. Matching stainless steel mounting screws provided. Plates are 0.032" thick. Meets all UL and CSA requirements. One gang duplex receptacle plate is made of type 304 stainless steel alloy to be non-magnetic and corrosion resistant. Matching screws are provided. Brushed satin finish to resist fingerprints. Standard size - 2.75" x 4.50", boxed. End plate. Single toggle. Decorator style. High gloss finish. Thermoplastic construction for durability and flexibility. Easy to snap together and lock. Mid-size design to fit over most existing wall openings. Screw-catch feature holds already attached mounting screws captive for easy installation. Screws are slotted steel, baked enamel and painted. Meets current Federal specifications as tested to UL 514. Temperature rating -40 degrees C to 70 degrees C. UL Listed, meets CSA standard. NEMA WD-1, WD-6.
Arrow Hart STE1V Mid Size Wall Plate Arrow Hart STE14V Blank Mid Size Wall Plate Arrow Hart STC14V Blank Mid Size Wall Plate
End plate. Single toggle. Decorator style. High gloss finish. Thermoplastic construction for durability and flexibility. Easy to snap together and lock. Mid-size design to fit over most existing wall openings. Screw-catch feature holds already attached mounting screws captive for easy installation. Screws are slotted steel, baked enamel and painted. Meets current Federal specifications as tested to UL 514. Temperature rating -40 degrees C to 70 degrees C. UL Listed, meets CSA standard. NEMA WD-1, WD-6. End plate, blank strap mount with metal yoke. High gloss finish. Thermoplastic construction for durability and flexibility. Easy to snap together and lock. Mid-size design to fit over most existing wall openings. Screw-Catch feature holds already attached mounting screws captive for easy installation. Screws are slotted steel, baked enamel and painted.  Meets current Federal specifications as tested to UL 514 (file no. E33216). Meets CSA standard C22.2, No. 42.1, (file no.9294). NEMA WD-1, WD-6. Meets flammability requirements per UL 94, V2 rated. Temperature rating -40 degrees C to 70 degrees C. Center plate, blank strap mount with metal yoke. High gloss finish. Thermoplastic construction for durability and flexibility. Easy to snap together and lock. Mid-size design to fit over most existing wall openings. Screw-Catch feature holds already attached mounting screws captive for easy installation. Screws are slotted steel, baked enamel and painted. Meets current Federal specifications as tested to UL 514 (file no. E33216). Meets CSA standard C22.2, No. 42.1, (file no.9294). NEMA WD-1, WD-6. Meets flammability requirements per UL 94, V2 rated. Temperature rating -40 degrees C to 70 degrees C.
Arrow Hart STC14W Blank Mid Size Wall Plate Hubbell 167 Octagon Box Arrow Hart 2132 Standard Wall Plate
Center plate, blank strap mount with metal yoke. High gloss finish. Thermoplastic construction for durability and flexibility. Easy to snap together and lock. Mid-size design to fit over most existing wall openings. Screw-Catch feature holds already attached mounting screws captive for easy installation. Screws are slotted steel, baked enamel and painted. Meets current Federal specifications as tested to UL 514 (file no. E33216). Meets CSA standard C22.2, No. 42.1, (file no.9294). NEMA WD-1, WD-6. Meets flammability requirements per UL 94, V2 rated. Temperature rating -40 degrees C to 70 degrees C. Two 1/2" and two 3/4" conduit knockouts (sides). Three 3/4" and two 1/2" conduit knockouts (bottom). No bracket. Can be used in the installation of ceiling or wall lighting fixtures or as a junction box. Not designed for ceiling fan support. 50 pound maximum recommended static load. Acceptable for use in 2-hour fire rated walls. UL Listed. UPC bar code. Flush fitting, warp resistant design. Screw-catch feature holds mounting screws captive. Matching screws provided. High gloss finish is soil resistant. Standard size - 2.75" x 4.50".
Arrow Hart 2132W Wall Plate Arrow Hart 93401-BOX Decorator Wall Plate Raco 111 Extension Ring Ceiling Outlet Box
Flush fitting, warp resistant design. Screw-catch feature holds mounting screws captive. Matching screws provided. High gloss finish is soil resistant. Standard size - 2.75" x 4.50". Made of Type 304 stainless steel alloy for superior non-magnetic corrosion-resistant properties. Plates are 0.032" thick. Brushed satin finish resists fingerprints. Matching stainless steel mounting screws provided. Standard size - 2.75" x 4.50", boxed. Extension rings provide a means for adding 11.8 additional cubic capacity to a box or as an outlet box for surface conduit. Not designed for ceiling fan support. Four 1/2" conduit knockouts on the sides. 50 pound maximum recommended static load. Acceptable for use in 2-hour rated walls and ceilings. 1-1/2" deep x 11.8 cubic inches. UL Listed.
Raco 175 Ceiling Outlet Box Hubbell 160 Octagon Box Raco 112 Electrical Box
With non-metallic sheathed cable clamps. Two 1/2" conduit knockouts and four cable knockouts, (sides). One 1/2" conduit knockout, (bottom). Can be used in the installation of ceiling or wall lighting fixtures or as a junction box. Not designed for ceiling fan support. 50 pound maximum recommended static load. 2-1/8" deep, 21.5 cubic inch capacity. UL Listed. With non-metallic sheathed cable clamps. Two 1/2" conduit knockouts and four cable knockouts, (sides). One 1/2" conduit knockout, (bottom). Can be used in the installation of ceiling or wall lighting fixtures or as a junction box. Not designed for ceiling fan support. 50 pound maximum recommended static load. J side-mount bracket with spurs and holes for toe-nailing, for wood studs or joists. UPC bar code. UL Listed. With non-metallic sheathed cable clamps. Two 1/2" conduit knockouts and four cable knockouts, (sides). One 1/2" conduit knockout, (bottom). Octagon boxes can be used in the installation of ceiling or wall lighting fixtures or as a junction box. Not designed for ceiling fan support. 1-1/2" deep, 11.8 cubic inch capacity. UL Listed, acceptable for use in 2-hour fire rated walls.
BOX OCT 4IN 1-1/2DP NM CLAMP  Arrow Hart PJS1 Mid Size Screw less Wall Plate Arrow Hart PJS1 Mid Size Screw less Wall Plate
With non-metallic sheathed cable clamps. With ear brackets. Two 1/2" conduit knockouts and four cable knockouts, (sides). One 1/2" conduit knockout, (bottom). Can be used in the installation of ceiling or wall lighting fixtures or as a junction box. Not designed for ceiling fan support. 50 pound maximum recommended static load. 1-1/2" deep, 15.5 cubic inch capacity. Acceptable for use in 2-hour fire rated walls. UL Listed. Screwless mid-size switch plate wall plates are virtually unbreakable and present a clean, minimalist look that can be changed in seconds. Easy installation, simply screw the mounting plate onto the wiring device and press into place. Screwless mid-size switch plate wall plates are virtually unbreakable and present a clean, minimalist look that can be changed in seconds. Easy installation, simply screw the mounting plate onto the wiring device and press into place.
Arrow Hart 5132W Wall Plate Arrow Hart 5132V Wall Plate Arrow Hart PJ1EMRD Mid Size Wall Plate
Molded from non-flammable nylon. Flush fitting, warp resistant design. Screw-catch feature holds mounting screws captive and simplifies installation. Matching screws provided. High gloss finish is soil resistant. Standard size - 2.75" x 4.50". Molded from non-flammable nylon. Flush fitting, warp resistant design. Screw-catch feature holds mounting screws captive and simplifies installation. Matching screws provided. High gloss finish is soil resistant. Standard size - 2.75" x 4.50". Molded from non-flammable Polycarbonate, pre-marked "EMERGENCY" with indelible printing guaranteed not to fade, bleed or rub off. High letters for easy identification. Virtually unbreakable, with high structural rigidity, long-term form retention and superior impact and abrasion resistance. Screw-catch feature holds mounting screws captive and simplifies installation. Matching screws provided. High gloss finish is soil resistant. Mid-size - 3.125" x 4.875".
Arrow Hart 2164 Decorative Standard Wall Plate Arrow Hart 2164 Decorative Standard Wall Plate Arrow Hart PJS2 Mid Size Screw less Wall Plate
Molded from non-flammable thermoset. Flush fitting, warp resistant design. Screw-catch feature holds mounting screws captive and simplifies installation. Matching screws provided. High gloss finish is soil resistant. Standard size. Molded from non-flammable thermoset. Flush fitting, warp resistant design. Screw-catch feature holds mounting screws captive and simplifies installation. Matching screws provided. High gloss finish is soil resistant. Standard size. Screwless mid-size toggle wall plate, virtually unbreakable, clips easily into place with gentle pressure. Features clean appearance with no visible mounting hardware. Works with standard toggle switches. Molded from non-flammable Polycarbonate, with high structural rigidity, long-term form retention and superior impact and abrasion resistance.
Arrow Hart PJS2 Mid Size Screw less Wall Plate Arrow Hart 5132 Standard Wall Plate Arrow Hart 5132 Standard Wall Plate
Screwless mid-size toggle wall plate, virtually unbreakable, clips easily into place with gentle pressure. Features clean appearance with no visible mounting hardware. Works with standard toggle switches. Molded from non-flammable Polycarbonate, with high structural rigidity, long-term form retention and superior impact and abrasion resistance. Molded from non-flammable nylon. Flush fitting, warp resistant design. Screw-catch feature holds mounting screws captive and simplifies installation. Matching screws provided. High gloss finish is soil resistant. Standard size - 2.75" x 4.50". Molded from non-flammable nylon. Flush fitting, warp resistant design. Screw-catch feature holds mounting screws captive and simplifies installation. Matching screws provided. High gloss finish is soil resistant. Standard size - 2.75" x 4.50".
Arrow Hart PJS3 Mid Size Screw less Wall Plate Arrow Hart PJS3 Mid Size Screw less Wall Plate Arrow Hart 5132 Standard Wall Plate
Screwless mid-size toggle wall plate, virtually unbreakable, clips easily into place with gentle pressure. Features clean appearance with no visible mounting hardware. Works with standard toggle switches. Molded from non-flammable Polycarbonate, with high structural rigidity, long-term form retention and superior impact and abrasion resistance. Screwless mid-size toggle wall plate, virtually unbreakable, clips easily into place with gentle pressure. Features clean appearance with no visible mounting hardware. Works with standard toggle switches. Molded from non-flammable Polycarbonate, with high structural rigidity, long-term form retention and superior impact and abrasion resistance. Molded from non-flammable nylon. Flush fitting, warp resistant design. Screw-catch feature holds mounting screws captive and simplifies installation. Matching screws provided. High gloss finish is soil resistant. Standard size - 2.75" x 4.50".
WALLPLATE DUPLEX 1G LA        Arrow Hart 2132W-BOX Standard Wall Plate Arrow Hart 2132B-BOX Standard Wall Plate
WALLPLATE DUPLEX 1G LA
Our Price: $7.88
Molded from non-flammable nylon. Flush fitting, warp resistant design. Screw-catch feature holds mounting screws captive and simplifies installation. Matching screws provided. High gloss finish is soil resistant. Standard size - 2.75" x 4.50". Flush fitting, warp resistant design. Screw-catch feature holds mounting screws captive. Matching screws provided. High gloss finish is soil resistant. Standard size - 2.75" x 4.50". Flush fitting, warp resistant design. Screw-catch feature holds mounting screws captive. Matching screws provided. High gloss finish is soil resistant. Standard size - 2.75" x 4.50".
Arrow Hart 2132V-BOX Standard Wall Plate Southwire 55082415 Armored Cable Arrow Hart 5134 Standard Wall Plate
Flush fitting, warp resistant design. Screw-catch feature holds mounting screws captive. Matching screws provided. High gloss finish is soil resistant. Standard size - 2.75" x 4.50". Wire whip, 14/3 AWG. Molded from non-flammable nylon. Flush-fitting, warp resistant design. Screw-catch feature holds mounting screws captive and simplifies installation. Matching screws provided. High gloss finish is soil resistant. Plate size: 4.50" x 2.75"
Arrow Hart 2128B-BOX Standard Wall Plate Arrow Hart 2128W-BOX Standard Wall Plate Arrow Hart Eagle 2150 Standard Wall Plate
Molded from non-flammable thermoset. Flush fitting, warp resistant design. Matching screws provided. High gloss finish is soil resistant. Standard size - 2.75" x 4.50". Molded from non-flammable thermoset. Flush fitting, warp resistant design. Matching screws provided. High gloss finish is soil resistant. Standard size - 2.75" x 4.50". Molded from non-flammable thermoset. Flush fitting, warp resistant design. Screw-catch feature holds mounting screws captive and simplifies installation. Matching screws provided. High gloss finish is soil resistant. Standard size - 4.50" x 4.563", boxed.
Arrow Hart 2150V-BOX Standard Wall Plate Arrow Hart 2150W-BOX Standard Wall Plate Arrow Hart 2137 Blank Standard Wall Plate
Molded from non-flammable thermoset. Flush fitting, warp resistant design. Screw-catch feature holds mounting screws captive and simplifies installation. Matching screws provided. High gloss finish is soil resistant. Standard size - 4.50" x 4.563", boxed. Molded from non-flammable thermoset. Flush fitting, warp resistant design. Screw-catch feature holds mounting screws captive and simplifies installation. Matching screws provided. High gloss finish is soil resistant. Standard size - 4.50" x 4.563", boxed. Non-flammable, box mounted, flush fitting, warp resistant design. Matching screws provided. High gloss finish is soil resistant. Standard size - 4.50" x 4.563".
Arrow Hart 2129 Blank Standard Wall Plate Arrow Hart 2129V-BOX Blank Standard Wall Plate Arrow Hart 2129W-BOX Standard Wall Plate
Molded from non-flammable thermoset. Flush fitting, warp resistant design. Matching screws provided. High gloss finish is soil resistant. Boxed. Molded from non-flammable thermoset. Flush fitting, warp resistant design. Matching screws provided. High gloss finish is soil resistant. Boxed. Molded from non-flammable thermoset. Flush fitting, warp resistant design. Matching screws provided. High gloss finish is soil resistant. Boxed.
Cooper 35MRW Wall Plate Armorlite 68580021 Type MC Armored Cable Armorlite 68579221 Type MC Armored Cable
Shallow design provides ample room behind the drywall and between the studs, and accommodates cable bend requirements. Enclosure has three side openings which provide for the installation of two connectivity points for power, audio, and video and another for cable entry. Includes cover plate with flex rubber pass-through for gripping and positioning of cables and cords; can also be used as template for outlining cover cutout on wall. Swing-out clamps lock the plate securely to wall. Allows for single receptacle at point of installation, perfect for wall-mounted flat screen TVs. Pre-installed conductors within an overall protective metallic interlocked armor. 45 percent lighter than steel MC cable. Cable reverse wound for ease of pulling and installation. Conductors - solid bare annealed copper per ASTM B-3, stranded copper stranding per ASTM B-8 for conductor. Conductor insulation rated 90 degree Celsius dry, 75 degrees Celsius wet at 600 volt. Conductor insulation is flame retardant, heat resistant PVC with flame, oil and gasoline resistant nylon jacket. General applications: branch, feeder, and service power distribution in commercial, industrial, institutional, and multi-residential construction/facilities, power, lighting, control, and signal circuits, concealed or exposed installations, installed in raceway/conduit, fished or embedded in plaster, installed in cable tray, and as aerial cable on a messenger. UL Classified 1, 2 and 3 hour through penetration firestop systems: W-L-3110, W-L-3113, W-L-31120, W-L-3121, C-A-J-3115, C-A-J-3140, C-A-J-3142, C-A-J-3202, C-A-J-4065, and C-A-J-4066. UL Listed. Pre-installed conductors within an overall protective metallic interlocked armor. 45 percent lighter than steel MC cable. Cable reverse wound for ease of pulling and installation. Conductors - solid bare annealed copper per ASTM B-3, stranded copper stranding per ASTM B-8 for conductor. Conductor insulation rated 90 degree Celsius dry, 75 degrees Celsius wet at 600 volt. Conductor insulation is flame retardant, heat resistant PVC with flame, oil and gasoline resistant nylon jacket. General applications: branch, feeder, and service power distribution in commercial, industrial, institutional, and multi-residential construction/facilities, power, lighting, control, and signal circuits, concealed or exposed installations, installed in raceway/conduit, fished or embedded in plaster, installed in cable tray, and as aerial cable on a messenger. UL Classified 1, 2 and 3 hour through penetration firestop systems: W-L-3110, W-L-3113, W-L-31120, W-L-3121, C-A-J-3115, C-A-J-3140, C-A-J-3142, C-A-J-3202, C-A-J-4065, and C-A-J-4066. UL Listed.
Duraclad 55278321 Type MC Armored Cable Duraclad 55274921 Type MC Armored Cable First Alert CO250B Single Gas Detector
Constructed with soft-drawn copper, type THHN insulated conductors which are individually wrapped with a moisture-resistant, flame-retardant paper covering. Interlocking steel armor is applied over the assembly. A 16 AWG aluminum bond wire is placed inside the armor, runs longitudinally and is in intimate contact with the armor for its entire length. General applications: Dry locations only, branch, feeder, and service power distribution in commercial, industrial, institutional, and multi-residential buildings, power, lighting, control and signal circuits, concealed or exposed installations, installed in cable tray and approved raceways, environmental air-handling spaces per NEC and under raised floors for information technology equipment conductors and cables per NEC 645.5(D) & 645.5(D)(2). 300.22(C), fished or embedded in plaster. Meets or exceeds the requirements of UL Standard 4 for Armored Cable, UL Standard 83, Federal Specification A-A59544 (formerly J-C-30B), and the National Electrical Code. Listed for use in UL 1, 2, and 3 hour through-penetration firestop systems. Constructed with soft-drawn copper, type THHN insulated conductors which are individually wrapped with a moisture-resistant, flame-retardant paper covering. Interlocking steel armor is applied over the assembly. A 16 AWG aluminum bond wire is placed inside the armor, runs longitudinally and is in intimate contact with the armor for its entire length. General applications: Dry locations only, branch, feeder, and service power distribution in commercial, industrial, institutional, and multi-residential buildings, power, lighting, control and signal circuits, concealed or exposed installations, installed in cable tray and approved raceways, environmental air-handling spaces per NEC and under raised floors for information technology equipment conductors and cables per NEC 645.5(D) & 645.5(D)(2). 300.22(C), fished or embedded in plaster. Meets or exceeds the requirements of UL Standard 4 for Armored Cable, UL Standard 83, Federal Specification A-A59544 (formerly J-C-30B), and the National Electrical Code. Listed for use in UL 1, 2, and 3 hour through-penetration firestop systems. Single station carbon monoxide alarm specifically designed for residential and institutional applications including sleeping rooms of hospitals, hotels, motels, dormitories, and other multifamily dwellings. Provides early warning of the presence of carbon monoxide. It features an electrochemical carbon monoxide sensor, an 85dB horn, a 9 volt battery power supply, a full function test switch, a silence feature to silence unwanted nuisance alarms and a red LED light that indicates DC power or alarm. It also features a tamper resistant locking pin that locks alarm cover to prevent removal of battery. Operates between 40F (4C) and 100 degreesF (38 degreesC) and relative humidity between 10 and 95 percent. Designed for wall or ceiling mounting. Includes battery, mounting anchors and screws. Alarm dimensions: 4.25" diameter  x 1.6" height, weight: 5.1 ounces. 7-year limited warranty. UL Listed.
First Alert CO400B Single Gas Detector First Alert CO400 Single Gas Detector First Alert CO600 Plug-In Carbon Monoxide Detector
Works during power outages. No installation required. Place or mount almost anywhere. Mute/test button to quiet unnecessary alarms, test alarm function. 85-decibel alarm, low battery warning. Low battery mute quiets low battery signal for up to 8 hours. Front-open compartment allows battery change without taking alarm down. Electrochemical sensor is the most accurate technology available for detecting carbon monoxide. End of life timer alarm chirps when it is time to replace the alarm. Meets UL2034 standard. Uses 9 volt battery, included. Works during power outages. No installation required. Place or mount almost anywhere. Mute/test button to quiet unnecessary alarms, test alarm function. 85-decibel alarm, low battery warning. Low battery mute quiets low battery signal for up to 8 hours. Front-open compartment allows battery change without taking alarm down. Electrochemical sensor is the most accurate technology available for detecting carbon monoxide. End of life timer alarm chirps when it is time to replace the alarm. Meets UL2034 standard. Uses 9 volt battery, included. No batteries required. 120 volt plug-in. With silence feature, samples the air and performs self-diagnostic tests approximately every second. A microchip inside the unit stores each reading, and remembers the levels of CO it has been exposed to over time. Controls are: test/silence button, green power light, yellow service light, red alarm light. Loud 85-decibel alarm, UL listed. 5 year limited warranty. 3.3" height x 4.75" width x 2" depth, 0.24 pounds.
Armorlite 68579222 Type MC Armored Cable First Alert SCO2B Ionization Single Gas Detector Armorlite 68583421 Type MC Armored Cable
Pre-installed conductors within an overall protective metallic interlocked armor. 45 percent lighter than steel MC cable. Cable reverse wound for ease of pulling and installation. Conductors - solid bare annealed copper per ASTM B-3, stranded copper stranding per ASTM B-8 for conductor. Conductor insulation rated 90 degree Celsius dry, 75 degrees Celsius wet at 600 volt. Conductor insulation is flame retardant, heat resistant PVC with flame, oil and gasoline resistant nylon jacket. General applications: branch, feeder, and service power distribution in commercial, industrial, institutional, and multi-residential construction/facilities, power, lighting, control, and signal circuits, concealed or exposed installations, installed in raceway/conduit, fished or embedded in plaster, installed in cable tray, and as aerial cable on a messenger. UL Classified 1, 2 and 3 hour through penetration firestop systems: W-L-3110, W-L-3113, W-L-31120, W-L-3121, C-A-J-3115, C-A-J-3140, C-A-J-3142, C-A-J-3202, C-A-J-4065, and C-A-J-4066. UL Listed. State of the art smoke and CO combination alarm designed to provide early warning of a fire or carbon monoxide danger. Has a dual chamber ionization smoke sensor and an electrochemical CO sensor. Loud 85-decibel alarm, low battery warning. End of life alarm chirps when it is time to replace detector. Operates between 40F (4C) and 100 degreesF (38 degreesC) and relative humidity between 10 and 95 percent. Two latching features: alarm latch to easily identify initiating alarm after alarm condition has subsided and low battery latch: to visually identify which unit is in low battery condition. Intelligent Sensing Technology helps reduce the number of nuisance alarms. Includes dust cover, mounting anchors and screws. 9 volt alkaline battery included. 7 year warranty. Pre-installed conductors within an overall protective metallic interlocked armor. 45 percent lighter than steel MC cable. Cable reverse wound for ease of pulling and installation. Conductors - solid bare annealed copper per ASTM B-3, stranded copper stranding per ASTM B-8 for conductor. Conductor insulation rated 90 degree Celsius dry, 75 degrees Celsius wet at 600 volt. Conductor insulation is flame retardant, heat resistant PVC with flame, oil and gasoline resistant nylon jacket. General applications: branch, feeder, and service power distribution in commercial, industrial, institutional, and multi-residential construction/facilities, power, lighting, control, and signal circuits, concealed or exposed installations, installed in raceway/conduit, fished or embedded in plaster, installed in cable tray, and as aerial cable on a messenger. UL Classified 1, 2 and 3 hour through penetration firestop systems: W-L-3110, W-L-3113, W-L-31120, W-L-3121, C-A-J-3115, C-A-J-3140, C-A-J-3142, C-A-J-3202, C-A-J-4065, and C-A-J-4066. UL Listed.
First Alert CO605 Plug-In Carbon Monoxide Detector Duraclad 55274922 Type MC Armored Cable CHIME BASIC RING
CHIME BASIC RING
Our Price: $30.57
Plug-in with battery back-up, works during power outages. Covers only one wall outlet. One button to silence or test alarm functions. Silence quiets low battery alert without affecting alarm operation. Loud 85-decibel alarm. Low battery warning. End of life timer alarm chirps when it is time to replace. Should be replaced every 5 years for maximum protection. 3.3" height x 4.75" width x 2" depth, 0.43 pounds. UL Listed. 5 year limited warranty. Uses 2 AA batteries, included. Constructed with soft-drawn copper, type THHN insulated conductors which are individually wrapped with a moisture-resistant, flame-retardant paper covering. Interlocking steel armor is applied over the assembly. A 16 AWG aluminum bond wire is placed inside the armor, runs longitudinally and is in intimate contact with the armor for its entire length. General applications: Dry locations only, branch, feeder, and service power distribution in commercial, industrial, institutional, and multi-residential buildings, power, lighting, control and signal circuits, concealed or exposed installations, installed in cable tray and approved raceways, environmental air-handling spaces per NEC and under raised floors for information technology equipment conductors and cables per NEC 645.5(D) & 645.5(D)(2). 300.22(C), fished or embedded in plaster. Meets or exceeds the requirements of UL Standard 4 for Armored Cable, UL Standard 83, Federal Specification A-A59544 (formerly J-C-30B), and the National Electrical Code. Listed for use in UL 1, 2, and 3 hour through-penetration firestop systems. Connect Chime to all Ring devices, and get Ring notifications anywhere at home. Plugs into any standard power outlet. Multiple alert tones, volume control and do not disturb mode.
Duraclad 55278521 Type MC Armored Cable Duraclad 55275021 Type MC Armored Cable Armolite 68580022 Solid Metal Clad Cable
Constructed with soft-drawn copper, type THHN insulated conductors which are individually wrapped with a moisture-resistant, flame-retardant paper covering. Interlocking steel armor is applied over the assembly. A 16 AWG aluminum bond wire is placed inside the armor, runs longitudinally and is in intimate contact with the armor for its entire length. General applications: Dry locations only, branch, feeder, and service power distribution in commercial, industrial, institutional, and multi-residential buildings, power, lighting, control and signal circuits, concealed or exposed installations, installed in cable tray and approved raceways, environmental air-handling spaces per NEC and under raised floors for information technology equipment conductors and cables per NEC 645.5(D) & 645.5(D)(2). 300.22(C), fished or embedded in plaster. Meets or exceeds the requirements of UL Standard 4 for Armored Cable, UL Standard 83, Federal Specification A-A59544 (formerly J-C-30B), and the National Electrical Code. Listed for use in UL 1, 2, and 3 hour through-penetration firestop systems. Constructed with soft-drawn copper, type THHN insulated conductors which are individually wrapped with a moisture-resistant, flame-retardant paper covering. Interlocking steel armor is applied over the assembly. A 16 AWG aluminum bond wire is placed inside the armor, runs longitudinally and is in intimate contact with the armor for its entire length. General applications: Dry locations only, branch, feeder, and service power distribution in commercial, industrial, institutional, and multi-residential buildings, power, lighting, control and signal circuits, concealed or exposed installations, installed in cable tray and approved raceways, environmental air-handling spaces per NEC and under raised floors for information technology equipment conductors and cables per NEC 645.5(D) & 645.5(D)(2). 300.22(C), fished or embedded in plaster. Meets or exceeds the requirements of UL Standard 4 for Armored Cable, UL Standard 83, Federal Specification A-A59544 (formerly J-C-30B), and the National Electrical Code. Listed for use in UL 1, 2, and 3 hour through-penetration firestop systems. Pre-installed conductors within an overall protective metallic interlocked armor. 45 percent lighter than steel MC cable. Cable reverse wound for ease of pulling and installation. Conductors - solid bare annealed copper per ASTM B-3, stranded copper stranding per ASTM B-8 for conductor. Conductor insulation rated 90 degree Celsius dry, 75 degrees Celsius wet at 600 volt. Conductor insulation is flame retardant, heat resistant PVC with flame, oil and gasoline resistant nylon jacket. General applications: branch, feeder, and service power distribution in commercial, industrial, institutional, and multi-residential construction/facilities, power, lighting, control, and signal circuits, concealed or exposed installations, installed in raceway/conduit, fished or embedded in plaster, installed in cable tray, and as aerial cable on a messenger. UL Classified 1, 2 and 3 hour through penetration firestop systems: W-L-3110, W-L-3113, W-L-31120, W-L-3121, C-A-J-3115, C-A-J-3140, C-A-J-3142, C-A-J-3202, C-A-J-4065, and C-A-J-4066. UL Listed.
Duraclad 55278322 Type MC Armored Cable First Alert CO410 Single Gas Detector First Alert CO615 Plug-In Single Gas Detector
Constructed with soft-drawn copper, type THHN insulated conductors which are individually wrapped with a moisture-resistant, flame-retardant paper covering. Interlocking steel armor is applied over the assembly. A 16 AWG aluminum bond wire is placed inside the armor, runs longitudinally and is in intimate contact with the armor for its entire length. General applications: Dry locations only, branch, feeder, and service power distribution in commercial, industrial, institutional, and multi-residential buildings, power, lighting, control and signal circuits, concealed or exposed installations, installed in cable tray and approved raceways, environmental air-handling spaces per NEC and under raised floors for information technology equipment conductors and cables per NEC 645.5(D) & 645.5(D)(2). 300.22(C), fished or embedded in plaster. Meets or exceeds the requirements of UL Standard 4 for Armored Cable, UL Standard 83, Federal Specification A-A59544 (formerly J-C-30B), and the National Electrical Code. Listed for use in UL 1, 2, and 3 hour through-penetration firestop systems. Electrochemical carbon monoxide sensor, the most accurate sensor available. Battery powered, no installation required. Backlit electronic display identifies hazards. Front access battery door. Button to silence or test alarm functions. 85-decibel alarm, low battery warning with silence feature. Action chart gives instructions on what to do if an alarm sounds. 3.3" height x 4.75" width x 1.5" depth, 0.39 pounds. UL Listed. 5 year limited warranty. Uses 2 AA batteries, included. Electrochemical carbon monoxide sensor. Covers only one wall outlet. Plug the alarm into a regular outlet, test, and it's ready. Battery back-up keeps alarm working if electricity fails. Point and click any remote control unit to quiet unwanted alarms (remote not included). EZ view backlit digital carbon monoxide level display to view danger levels, current, and peak CO levels. Memory stores, recalls, and displays highest levels of CO detected. Low battery warning, low battery silence quiets low battery alert without affecting alarm operation. End of life timer alarm chirps when it is time to replace, should be replaced every 5 years for maximum protection. Loud 85-decibel alarm. 3.3" height x 4.75" width x 2.8" depth, 0.54 pounds. UL Listed. 5 year limited warranty. Uses 2 AA batteries, included.
SMOKE/CO ALARM BATT ONLY ROUND First Alert CO5120BN Single Gas Detector Armolite 68583422 Solid Metal Clad Cable
Low profile compact round battery powered photoelectric smoke and CO combo alarm with silence feature. Tamper resistant, alarm locks to mounting bracket to prevent removal of battery and/or alarm. Photoelectric smoke sensing technology. Electrochemical CO sensing technology. 10 year CO sensor and 10 year end of life. Provides audible notice when alarm needs to be replaced. Uses 2 AA batteries, included. Hardwired carbon monoxide alarm with 9 volt alkaline battery back-up. Electrochemical carbon monoxide sensor. Latching alarm indicator. Single button test/silence. Silences the low-battery chirp for up to eight hours or temporarily silences a nuisance alarm. Intelligent Sensing technology helps reduce the number of nuisance alarms. Dust cover. 5 year limited warranty. Pre-installed conductors within an overall protective metallic interlocked armor. 45 percent lighter than steel MC cable. Cable reverse wound for ease of pulling and installation. Conductors - solid bare annealed copper per ASTM B-3, stranded copper stranding per ASTM B-8 for conductor. Conductor insulation rated 90 degree Celsius dry, 75 degrees Celsius wet at 600 volt. Conductor insulation is flame retardant, heat resistant PVC with flame, oil and gasoline resistant nylon jacket. General applications: branch, feeder, and service power distribution in commercial, industrial, institutional, and multi-residential construction/facilities, power, lighting, control, and signal circuits, concealed or exposed installations, installed in raceway/conduit, fished or embedded in plaster, installed in cable tray, and as aerial cable on a messenger. UL Classified 1, 2 and 3 hour through penetration firestop systems: W-L-3110, W-L-3113, W-L-31120, W-L-3121, C-A-J-3115, C-A-J-3140, C-A-J-3142, C-A-J-3202, C-A-J-4065, and C-A-J-4066. UL Listed.
ALARM CO DIGITAL 10YR BATTERY SMOKE/CO ALARM 10YR SLIM ROUND CHIMR PRO RING
CHIME PRO RING
Our Price: $51.55
Multi-function, backlit digital display, view CO levels or ambient room temperature. Peak level feature retrieves the highest concentration of carbon monoxide measured. Powered by sealed, ten year lithium battery to provide continuous protection for ten years without battery replacement. Modern, compact design allows easy tabletop or wall mount placement. Meets UL2034 standards. Low profile compact round battery powered photoelectric smoke and CO combo alarm with silence feature. Tamper resistant, alarm locks to mounting bracket to prevent removal of battery and/or alarm. Powered by sealed, ten year lithium batteries to provide continuous protection for ten years without battery replacement. Photoelectric smoke sensing technology. Electrochemical CO sensing technology. 10 year CO sensor and 10 year end of life. Provides audible notice when alarm needs to be replaced. Extends Wi-Fi signal and amplifies Ring alerts. Plug into any standard power outlet, link it to all Ring devices, and get Ring alerts anywhere at home. Multiple alert tones, volume control.
First Alert SC9120B Hardwired Smoke/Carbon Monoxide Alarm Armolite 68580023 Solid Metal Clad Cable ALARM SMOKE/CO W/VOICE 10YR
Combination 120 volt AC smoke and carbon monoxide alarm with 9-volt battery backup, interconnectable with BRK smoke and CO alarms. It eliminates the need for two separate electrical boxes, saving installation time and materials. Separate visual and audible smoke and CO indicators eliminate confusion. Controls can silence the low-battery chirp for up to eight hours or temporarily silence an unwanted nuisance alarm. Latching alarm indicator, mounting bracket and battery drawer locks. The alarm meets building codes where AC/DC smoke and carbon monoxide alarms are required, either separately or in combination. 5 year limited warranty. Pre-installed conductors within an overall protective metallic interlocked armor. 45 percent lighter than steel MC cable. Cable reverse wound for ease of pulling and installation. Conductors - solid bare annealed copper per ASTM B-3, stranded copper stranding per ASTM B-8 for conductor. Conductor insulation rated 90 degree Celsius dry, 75 degrees Celsius wet at 600 volt. Conductor insulation is flame retardant, heat resistant PVC with flame, oil and gasoline resistant nylon jacket. General applications: branch, feeder, and service power distribution in commercial, industrial, institutional, and multi-residential construction/facilities, power, lighting, control, and signal circuits, concealed or exposed installations, installed in raceway/conduit, fished or embedded in plaster, installed in cable tray, and as aerial cable on a messenger. UL Classified 1, 2 and 3 hour through penetration firestop systems: W-L-3110, W-L-3113, W-L-31120, W-L-3121, C-A-J-3115, C-A-J-3140, C-A-J-3142, C-A-J-3202, C-A-J-4065, and C-A-J-4066. UL Listed. Low profile compact round battery powered photoelectric smoke and CO combo alarm with silence feature. Tamper resistant, alarm locks to mounting bracket to prevent removal of battery and/or alarm. Powered by sealed, ten year lithium batteries to provide continuous protection for ten years without battery replacement. Photoelectric smoke sensing technology. Electrochemical CO sensing technology. 10 year CO sensor and 10 year end of life. Provides audible notice when alarm needs to be replaced.
Duraclad 55278323 Type MC Armored Cable Duraclad 55274923 Type MC Armored Cable First Alert GCO1CN Plug-In Combination Gas Detector
Constructed with soft-drawn copper, type THHN insulated conductors which are individually wrapped with a moisture-resistant, flame-retardant paper covering. Interlocking steel armor is applied over the assembly. A 16 AWG aluminum bond wire is placed inside the armor, runs longitudinally and is in intimate contact with the armor for its entire length. General applications: Dry locations only, branch, feeder, and service power distribution in commercial, industrial, institutional, and multi-residential buildings, power, lighting, control and signal circuits, concealed or exposed installations, installed in cable tray and approved raceways, environmental air-handling spaces per NEC and under raised floors for information technology equipment conductors and cables per NEC 645.5(D) & 645.5(D)(2). 300.22(C), fished or embedded in plaster. Meets or exceeds the requirements of UL Standard 4 for Armored Cable, UL Standard 83, Federal Specification A-A59544 (formerly J-C-30B), and the National Electrical Code. Listed for use in UL 1, 2, and 3 hour through-penetration firestop systems. Constructed with soft-drawn copper, type THHN insulated conductors which are individually wrapped with a moisture-resistant, flame-retardant paper covering. Interlocking steel armor is applied over the assembly. A 16 AWG aluminum bond wire is placed inside the armor, runs longitudinally and is in intimate contact with the armor for its entire length. General applications: Dry locations only, branch, feeder, and service power distribution in commercial, industrial, institutional, and multi-residential buildings, power, lighting, control and signal circuits, concealed or exposed installations, installed in cable tray and approved raceways, environmental air-handling spaces per NEC and under raised floors for information technology equipment conductors and cables per NEC 645.5(D) & 645.5(D)(2). 300.22(C), fished or embedded in plaster. Meets or exceeds the requirements of UL Standard 4 for Armored Cable, UL Standard 83, Federal Specification A-A59544 (formerly J-C-30B), and the National Electrical Code. Listed for use in UL 1, 2, and 3 hour through-penetration firestop systems. Multi hazard combo detects carbon monoxide, propane gas and natural/methane gas. Backlit digital display with test and silence. Covers only one wall outlet. Plug the alarm into a regular outlet, test, and it's ready. Battery back-up keeps alarm working if electricity fails. Point and click any remote control unit to quiet unwanted alarms (remote not included). With a line cord for high mounting to sense methane, low mounting for propane. End of life timer alarm chirps when it is time to replace, should be replaced every 5 years for maximum protection. 85-decibel alarm. 3.1" height x 5.6" width x 2.1" depth, 0.62 pounds. Meets UL1484 and UL2034 gas detector standards. Battery back-up, 9 volt battery included.
First Alert SCO501CN-3ST Wireless Single Gas Detector First Alert SC7010BV Single Gas Detector LEAK WATER DETECTOR WI-FI
LEAK WATER DETECTOR WI-FI
Our Price: $83.70
First Alert ONELINK-enabled voice alarm with up to 11 programmable locations. Add additional battery-operated First Alert ONELINK-enabled alarms to create a wireless safety network. Photoelectric smoke alarm reduces nuisance alarms. Alarm and low battery silence feature. Hardwired photoelectric smoke/CO combination alarm with voice, programmable with up to eleven locations. Single button test/silence, can silence the low-battery chirp for up to eight hours or temporarily silence a nuisance alarm. 360 degrees direct access to the smoke sensor. Spread spectrum horn tone - lower and varying frequency. Alarm latch, dust cover. 2 AA alkaline battery backup. Sends alerts by text and email. Also has an audible alarm. Detector is reusable. Sound intensity of 100 dB. Uses 3 AA batteries.
Armolite 68583423 Solid Metal Clad Cable Duraclad 55278301 Type MC Armored Cable Duraclad 55274901 Type MC Armored Cable
Pre-installed conductors within an overall protective metallic interlocked armor. 45 percent lighter than steel MC cable. Cable reverse wound for ease of pulling and installation. Conductors - solid bare annealed copper per ASTM B-3, stranded copper stranding per ASTM B-8 for conductor. Conductor insulation rated 90 degree Celsius dry, 75 degrees Celsius wet at 600 volt. Conductor insulation is flame retardant, heat resistant PVC with flame, oil and gasoline resistant nylon jacket. General applications: branch, feeder, and service power distribution in commercial, industrial, institutional, and multi-residential construction/facilities, power, lighting, control, and signal circuits, concealed or exposed installations, installed in raceway/conduit, fished or embedded in plaster, installed in cable tray, and as aerial cable on a messenger. UL Classified 1, 2 and 3 hour through penetration firestop systems: W-L-3110, W-L-3113, W-L-31120, W-L-3121, C-A-J-3115, C-A-J-3140, C-A-J-3142, C-A-J-3202, C-A-J-4065, and C-A-J-4066. UL Listed. Constructed with soft-drawn copper, type THHN insulated conductors which are individually wrapped with a moisture-resistant, flame-retardant paper covering. Interlocking steel armor is applied over the assembly. A 16 AWG aluminum bond wire is placed inside the armor, runs longitudinally and is in intimate contact with the armor for its entire length. General applications: Dry locations only, branch, feeder, and service power distribution in commercial, industrial, institutional, and multi-residential buildings, power, lighting, control and signal circuits, concealed or exposed installations, installed in cable tray and approved raceways, environmental air-handling spaces per NEC and under raised floors for information technology equipment conductors and cables per NEC 645.5(D) & 645.5(D)(2). 300.22(C), fished or embedded in plaster. Meets or exceeds the requirements of UL Standard 4 for Armored Cable, UL Standard 83, Federal Specification A-A59544 (formerly J-C-30B), and the National Electrical Code. Listed for use in UL 1, 2, and 3 hour through-penetration firestop systems. Constructed with soft-drawn copper, type THHN insulated conductors which are individually wrapped with a moisture-resistant, flame-retardant paper covering. Interlocking steel armor is applied over the assembly. A 16 AWG aluminum bond wire is placed inside the armor, runs longitudinally and is in intimate contact with the armor for its entire length. General applications: Dry locations only, branch, feeder, and service power distribution in commercial, industrial, institutional, and multi-residential buildings, power, lighting, control and signal circuits, concealed or exposed installations, installed in cable tray and approved raceways, environmental air-handling spaces per NEC and under raised floors for information technology equipment conductors and cables per NEC 645.5(D) & 645.5(D)(2). 300.22(C), fished or embedded in plaster. Meets or exceeds the requirements of UL Standard 4 for Armored Cable, UL Standard 83, Federal Specification A-A59544 (formerly J-C-30B), and the National Electrical Code. Listed for use in UL 1, 2, and 3 hour through-penetration firestop systems.
Armorlite 68580001 Type MC Armored Cable Armorlite 68583401 Type MC Armored Cable Southwire 6SOLX315BARE Solid Electrical Wire
Constructed with soft-drawn copper, type THHN insulated conductors which are individually wrapped with a moisture-resistant, flame-retardant paper covering. Interlocking steel armor is applied over the assembly. A 16 AWG aluminum bond wire is placed inside the armor, runs longitudinally and is in intimate contact with the armor for its entire length. General applications: Dry locations only, branch, feeder, and service power distribution in commercial, industrial, institutional, and multi-residential buildings, power, lighting, control and signal circuits, concealed or exposed installations, installed in cable tray and approved raceways, environmental air-handling spaces per NEC and under raised floors for information technology equipment conductors and cables per NEC 645.5(D) & 645.5(D)(2). 300.22(C), fished or embedded in plaster. Meets or exceeds the requirements of UL Standard 4 for Armored Cable, UL Standard 83, Federal Specification A-A59544 (formerly J-C-30B), and the National Electrical Code. Listed for use in UL 1, 2, and 3 hour through-penetration firestop systems. Pre-installed conductors within an overall protective metallic interlocked armor. 45 percent lighter than steel MC cable. Cable reverse wound for ease of pulling and installation. Conductors - solid bare annealed copper per ASTM B-3, stranded copper stranding per ASTM B-8 for conductor. Conductor insulation rated 90 degree Celsius dry, 75 degrees Celsius wet at 600 volt. Conductor insulation is flame retardant, heat resistant PVC with flame, oil and gasoline resistant nylon jacket. General applications: branch, feeder, and service power distribution in commercial, industrial, institutional, and multi-residential construction/facilities, power, lighting, control, and signal circuits, concealed or exposed installations, installed in raceway/conduit, fished or embedded in plaster, installed in cable tray, and as aerial cable on a messenger. UL Classified 1, 2 and 3 hour through penetration firestop systems: W-L-3110, W-L-3113, W-L-31120, W-L-3121, C-A-J-3115, C-A-J-3140, C-A-J-3142, C-A-J-3202, C-A-J-4065, and C-A-J-4066. UL Listed. Equipment and circuit grounding.
Southwire 8SOLX500BARE Solid Electrical Wire Southwire 6STRDX315BARE Stranded Electrical Wire Southwire 4STRDX200BARE Stranded Electrical Wire
Equipment and circuit grounding. Flexible and easily shaped, formed, welded and soldered into place. Use in overhead transmission and distribution systems and for grounding grid systems. Flexible and easily shaped, formed, welded and soldered into place. Use in overhead transmission and distribution systems and for grounding grid systems.
Southwire 4SOLX200BARE Solid Electrical Wire DOORBELL W/VIDEO NO2          Southwire 2SOLX125BARE Solid Electrical Wire
DOORBELL W/VIDEO NO2
Our Price: $198.81
Equipment and circuit grounding. Includes two faceplates, satin nickel and venetian bronze. Rechargeable battery pack. Can also be hardwired to existing doorbell, 8-24 VAC. Uses home wireless internet (802.11 b/g/n Wi-Fi connection at 2.4GHz). 1080HD video. See, hear and speak to visitors from anywhere. Built-in microphone and speakers. Adjustable motion sensors. Instant alerts when motion is detected. Infrared night vision. iOS, Android, Mac and Windows 10 compatible. 160 degree field of view. RVD2 is weather-resistant, operating between -5 to 120 degreesF (-20 to 48 degreesC). Free 30-day trial of ring video recording. Equipment and circuit grounding.
Southwire 10SOLX800BARE Linear Electrical Wire DOORBELL PRO RING VIDEO
DOORBELL PRO RING VIDEO
Our Price: $245.27
Equipment and circuit grounding. Ultra-slim design with advanced security features. 1080HD video, two-way audio and customizable motion sensors. Includes 4 interchangeable faceplates. Do not disturb mode. 802.11 b/g/n Wi-Fi connection at 2.4GHz only. 110-240 volts, 0.6 watts. Requires existing doorbell wiring and a 16-24 VAC transformer. 160 degree field of view.
   
 
1