Home > ELECTRICAL > SPECIALTY ELECTRICAL > BATTERIES > RECHARGEABLE BATTERY/BATTERIES
Choose a sub category:
LANDSCAPE LIGHTING - LOW VOLT LOW VOLTAGE ACCESSORIES & PAR OUTDOOR SOLAR LIGHTING
PATIO/DECK LIGHTING
Sort By:
1
Romex CR-100 Cable Ripper/Stripper Gardner Bender GET-3100 Voltage Tester Cooper BP914 Circuit Tester
Tool slits romex and other non-metallic cable, checks wire gauge 6 to 14. Test for presence of voltage in live circuits. Tests AC/DC voltage from 80-250 volts. The neon indicator glows when voltage is present and brightens as voltage increases. Insulated housing and 2 inch test leads. Built in pocket clip. Tests DC motors, switches and outlets. With detailed user instructions. For testing electric circuits from 90 to 600 volt. Detects presence of power on either AC or DC circuits. Identifies circuit conductors.
Gardner Bender GET-3202 Low Voltage Voltage Tester Toolbasix JL-SST-401183L Cable Crimper Coleman Cable 95028 Outdoor Solar Lights
Tests AC/DC voltage from 5-50 volt. Glows when voltage is present and brightens as voltage increases. Insulated alligator clip tests leads. UL Listed. Carded. Cuts and strip wires, crimps ignition terminals. Easy-to-read wire size markings. Powered by the sun, no wiring required. Durable plastic construction. White LED provides downlighting effect. Installs with included screws. Rechargeable NiCd battery included.
Milwaukee Clipper GS-40 Adjustable Wire Cutter/Stripper Gardner Bender GTPS-3100 Cable Stripper Gardner Bender GRT-3500 Outlet Tester
Includes spring return and lock. Adjustable, hardened spring steel. Strips 10-24 gauge wire. Strips UTP and STP cable up to .24" (6.2mm) OD. Tension release lever, compact design. For use on CAT 3 and CAT 5 cable. Carded. Tests standard receptacles and extension cords to ensure proper wiring. Neon indicators give positive indication of circuit status. Compact unit simply plugs into any standard 3-wire/grounded receptacle or extension cord (110 /125 volt circuits). Tests for six circuit conditions: open ground, open neutral, open hot, hot/ground reverse, hot/neutral reverse and correct wiring. Yellow and red lights provides indication of circuit status or specifies wiring errors.
GB CR-1000 Cable Ripper Gardner Bender GET-213HV High Visibility Dual Indicator Voltage Tester Gardner Bender GET-3213 3-Range Voltage Tester
GB Cable Ripper, Premium, 14 - 6 AWG Cable/Wire, 4 in Overall Length, cULus Listed, For Use to Cut Off Cable Jacket Large, dual, neon indicators acknowledge presence of voltage. Individual indicators for each voltage range assures reliability of testing. Probes snap on bottom of housing for single hand testing of outlets. Insulated leads and housing. Tests from 100 to 300 volt AC/DC. UL Listed. Three-way live circuit tester indicates 120, 240 and 277 volt AC. UL Listed.
GB-Gardner Bender CT6101 Continuity Testers Gardner Bender ET6204 4-Range High Visibility Voltage Tester Energizer NH15BP-2 Rechargeable Battery
Tests for breaks in non-energized wires or cords. 360 degree visual indication. Durable, heavy-duty tip. Flexible lead with insulated alligator clip. Pocket clip. Operates from 2 AAA batteries (included). Compact ergonomic design. Hi-impact ABS housing. Visual voltage indication. Snap-in leads are spaced to fit a standard outlet for easy, hands-free testing. Tests for voltage at 120 volt, 240 volt, 277 volt and 480 volt. With pocket clip. cULus Listed. Plastic label jacket, 1.2 volt. For high drain devices such as digital cameras, CD players, toys and games. High energy, comes charged from the factory, ready to use. Recharges up to 700 times. Carded.
Energizer NH12BP-2 Rechargeable Battery Gardner Bender GFI-3501 Manual Outlet Tester Gardner Bender GS-386 Diagonal Cutting Plier
Plastic label jacket, 1.2 volt. For high drain devices such as digital cameras, CD players, toys and games. High energy, comes charged from the factory, ready to use. Recharges up to 700 times. Carded. Tests ground fault breakers by overloading circuit and tripping GFCI. Plug tester into any ground fault receptacle (110-125 volt AC) and press black button to overload circuit. Tests for seven conditions; ground fault interruption, open ground, open neutral, open hot, hot/ground reverse, hot/neutral reverse and correct wiring. Yellow and red lights provide indication of circuit status or specify which wire is defective. Carded. Tapered nose allows cutting in tight locations. Dual cutting edge and high-leverage comfort grip handle design for optimal cutting performance. Precision-machined and induction-hardened knives strengthen cutters and provide consistent performance when cutting aluminum, copper and medium-hard steel wire.
Gardner Bender GS-366 Cable Crimper/Stripper Gardner Bender GCT-3304 Low Voltage Twin Probe  Continuity Tester Gardner Bender GCV-3206 Low Voltage Twin Probe Continuity Tester
Strips cable, 10-22 AWG wire, crimps terminals and cuts bolts. Easy-to-read wire size markings. Economy continuity tester, tests continuity in nonenergized circuits. Features 36" insulated lead with alligator clip end. Fully shielded indicator bulb lights to indicate continuity, Uses 2 AA batteries, not included. Test continuity without wire probes on non-energized circuits. Tests AC/DC voltage from 12 to 250 volts on energized circuits. Glows when voltage or continuity exists. Uses 2 button batteries, included. UL Listed. Carded.
Duracell 66158 Rechargeable Battery Duracell 66153 Rechargeable Battery Bussmann Fuses BP/FP-2 Fuse Pullers
Precharged, staycharged, rechargeable batteries. Rechargeable up to 400 times. Precharged, staycharged, rechargeable batteries. Rechargeable up to 400 times. Heavy-duty tool for safely removing cartridge fuses from their blocks.
Gardner Bender GS-385 Multi-Function Long Nose Plier Mintcraft CP-C8153L Multi Function Wire Stripper Gardner Bender GAT-3400 Automotive Circuit Tester
Multi-function long nose pliers cut, strip and crimp. Use needle nose to form wire or grip small parts. Strips number 14 - number 16 AWG solid or stranded wire. Crimps insulated terminals up to number 10 AWG. Cuts solid or stranded wire. Serrated jaw and cushioned grips. Rust-resistant steel with cushioned vinyl grip. Easy-to-read wire size markings. Used to test DC voltage in automotive applications. Features 3' test lead with alligator clamp and 360 degree bright visual indicator. Durable ABS housing with pocket clip. Checks fuses in junction block, automotive circuits for voltage. Back probe connectors and sockets. No batteries required.
POST CAP FENCE SLR W/ADPTR WHT POST CAP FENCE SLR W/ADPTR BRZ POST CAP FENCE SLR W/ADPT BLK
Solar Fence Post Cap, with Adapter Solar Fence Post Cap, with Adapter Solar Fence Post Cap, with Adapter
Gardner Bender GS-45 Adjustable Wire Cutter/Stripper Gardner Bender GS-388 Light Duty Crimping Plier Gardner Bender GBT-3502 Battery Tester
Strips solid or stranded wire. Compact, adjusts to eight wire sizes. Hardened spring steel. Looping hole bends, loops wire for termination on screws. Also includes spring return for easy handling. Crimp insulated or non-insulated terminals. Tapered nose for cutting in tight locations. Cuts copper and aluminum wire. Cushioned grips. Carded. LOW/GOOD indicator. Movable contact arm to fit AA, AAA, C, D, 9 Volt and 1.5 volt button cells.
Gardner Bender TT-10B Electrician 3-In-1 Tapping and Rethreading Tool Energizer NH50 Rechargeable Battery Energizer NH22 Rechargeable Battery
Top grade Rockwell 60 steel. Fits tap sizes 6-32, 8-32 and 10-24. Unclogs screw holes, retaps stripped holes. NiMH round cell batteries' leading-edge technology makes them ideal for the most advanced, high-drain devices - digital cameras, personal digital assistant (PDAs), hand-held games, portable CD players and palmtop computers. Recharges up to 1,000 times. Batteries use universal charger CHM4FC/CHFCV, Orgill SKU 603.5752. Carded. NiMH leading-edge technology for high-drain devices - digital cameras, personal digital assistant (PDAs), hand-held games, portable CD players and palmtop computers. Recharges up to 1,000 times. Carded.
Energizer NH35 Rechargeable Battery Gardner Bender GK-4 Electrical Tool/Tester Set Gardner Bender GBT-500A Full Function Battery Tester
NiMH round cell batteries' leading-edge technology makes them ideal for the most advanced, high-drain devices - digital cameras, personal digital assistant (PDAs), hand-held games, portable CD players and palmtop computers. Recharges up to 1,000 times. Batteries use universal charger CHM4FC/CHFCV, Orgill SKU 603.5752. Carded. Contains the most common wiring tools and a voltage tester. Includes one No.GS-67 multi-function crimper/stripper, one No.CR-100 cable ripper and one GET-102  90-300 volt AC/DC circuit tester. Checks if battery is charged or needs replacing. Tests from 1.5 volt button cells to 22.5 volt photo and lantern cells. Tests condition of nickel-cadmium rechargeable batteries.
Gardner Bender GS-389 Cable Cutter/Crimper Gardner Bender GS-89 Cable Cutter/Crimper Coleman 95757 Low Voltage Recessed Deck Light
For high-leverage. Cuts up to 3/8" diameter cable. Crimps RG-58, RG-59 and RG-6 F-style connecters. Cushioned grips. For high-leverage. Cuts up to 3/8" diameter cable. Crimps RG-58, RG-59 and RG-6 F-style connecters. Cushioned grips. Accent light for use on decks and stairways. 10 watt bulb included. Uses replacement bulb # 95527.
Calterm 66212 Streamline Wire Stripper Gardner Bender GVD-3504 Non Contact Voltage Tester Amertac VM1001RG6ST Cable Stripper
Cushion grip wire handles. Strips and cuts. Plier nose for pulling and looping wire. Spring return and safety lock. Tests from 50-600 volt AC. Visual (flashing) and audible (beeping) indicators signal presence of voltage. Built-in "safe test" feature to assure batteries are operating properly. Compact design with pocket clip to fit in shirt pocket. UL Listed. Strips insulation from coax cable. 3.87" height x 1.25" width x .75" depth.
Gardner Bender GS-355 Wire Stripper GB-Gardner Bender CAM-10 Circuit Alert Voltage Testers Gardner Bender GS-360 Wire Stripper with Lock
Strips solid or stranded wire 10 - 20 AWG. Precision stripping stations. Laser-etched markings. Pliers nose and curved cutting blade aid in pulling and cutting wire. Spring-loaded action returns handles to open position. Curved high-leverage handles for added comfort. Looping hole forms wire to fit on screw terminal. Detects AC voltage without contacting live wires. For indoor use. Tri-directional momentary On/Off switch. Uses 2 LR44 button cell batteries, included. 50-600 volts AC, 50-60 Hz operating range. Audible and visual alert. Includes snap-on pocket clip. UL Listed. Strips solid or stranded wire. Laser-etched markings. Pliers nose and curved cutting blade aid in pulling and cutting wire. Power spring return reduces hand fatigue. Looping hole forms wire to fit on screw terminal.  Wire gauge #10 - #20 AWG.
Klein Tools 11045 Wire Cutter/Stripper Gardner Bender PDTL-3110 Non-Impact Punch Down Tool Klein 74007 Adjustable Wire Stripper
Wire gauge markings on both sides, cuts, strips, and loops wire. Wide handles with cushion ridges designed for comfort. Spring-loaded action returns handles to open position. Narrow nose fits into tight places. Made of hardened steel with precision-ground stripping holes. Black oxide finish. No. 11045 strips solid wire AWG. No. 11046 strips stranded wire. Non-impact punch-down, non-cut 110-style blade used in CAT 3 and CAT 5 terminations. Adjusts from 12 - 24 AWG (2.5 - .25 mm?). Gets into tight areas. Wire gauge dial sets stripping dies to proper size, helps prevent nicked wire. Spring-loaded design opens automatically after each action. Yellow handle, 5-1/2" length.
GB-Gardner Bender GK-3 Electrical Tester Kits Gardner Bender CS61200AS Adapter Set Gardner Bender GMT-312 12-Range Analog Multimeter
Contains the most common circuit testers for convenient electrical troubleshooting. One each No. GCT-204 continuity tester, No. GRT-500 receptacle tester and No.GET-102 90-300 volt AC/DC circuit tester. Use with CS61200 Sperry breaker finder to trace switches, light fixtures, and other energized wiring. Insulated leads, bulb socket adapter. Compact, tests AC/DC voltage to 300 volt, DC current to 250mA, resistance to 1 M ohm, decibels from -20 to +56dB. Diode protected. With fuse overload protection circuitry. 250 mA fuse. Includes safety test leads and instruction manual. CAT Rating: II 300 volt. cETLus Approved.
Klein Tools 11046 Wire Cutter/Stripper Gardner Bender GS-359 Cable Stripper Duracell 66160 Rechargeable Battery
Wire gauge markings on both sides, cuts, strips, and loops wire. Wide handles with cushion ridges designed for comfort. Spring-loaded action returns handles to open position. Narrow nose fits into tight places. Made of hardened steel with precision-ground stripping holes. Black oxide finish. No. 11045 strips solid wire AWG. No. 11046 strips stranded wire. Cuts and strips RG-59 and RG-6 coaxial cable, multiple size stripping stations strip both the outer jacket and inner conductor. Can be used with both standard and quad shield cable. Hex shaped slot helps push "F" connectors on to cable. Curved cutting blade, spring return. Precharged, staycharged, rechargeable batteries. Rechargeable up to 400 times.
Duracell 66155 Rechargeable Battery Energizer NH15BP-4 Rechargeable Battery Energizer NH12BP-4 Rechargeable Battery
Precharged, staycharged, rechargeable batteries. Rechargeable up to 400 times. Plastic label jacket, 1.2 volt. For high drain devices such as digital cameras, CD players, toys and games. High energy, comes charged from the factory, ready to use. Recharges up to 700 times. Carded. Plastic label jacket, 1.2 volt. For high drain devices such as digital cameras, CD players, toys and games. High energy, comes charged from the factory, ready to use. Recharges up to 700 times. Carded.
Gardner Bender GS-370 Multi Tool Wire Stripper Gardner Bender GS-359D Cable Cutter/Stripper Sperry VD6504 Adjustable Voltage Tester
Curved cutting blade, strips and cuts copper and aluminum wire, solid or stranded, 10-22 AWG. Precision ground-stripping stations prevent nicking conductor while stripping. Cuts and rethreads bolt sizes 4-40, 5-40, 6-32, 8-32, 10-24 and 10-32. Pliers nose for pulling and looping wire. Crimps insulated and non-insulated terminals. Crimps coaxial F connectors. Curved blade cuts and strips RG-59 and RG-6 coaxial cable. Can be used with both standard and quad shield cable. Multiple size stripping stations strip both the outer jacket and inner conductor. Hex-shaped slot helps push "F" connectors onto cable. Sperry Voltage Tester, Adjustable, 50 - 1000 VAC, No, 32 - 104 deg F, ABS, Includes: (1) AAA Battery, cULus, CE Certified, Cat III 1000V, Cat IV 600V Safety Rating, For Indoor Applications
Gardner Bender GS-394 Wire Crimper/Stripper TESTERS SAFETY N/CONT-GFCI 2PC Channellock 958 Wire Cutter/Stripper
Automatic action jaw-loaded stripper grips insulation, strips and cuts solid or stranded 10 to 24 AWG wire cleanly, with one squeeze. Crimps insulated, non-insulated terminals and auto 7-8 mm ignition terminals. Metric and AWG. Strips 10-26 gauge wire. Includes a non-contact voltage tester and an outlet/GFCI tester. Voltage tester indicates the presence of AC voltage from 50 - 600 volts. Outlet/GFCI tester checks ground fault receptacles by overloading circuit and tripping GFCI. Compact design for use where space is limited. Internationally rated/listed for safety. Strips insulation, with no damage to wire. Cuts copper wire cleanly. Scissor type blades are precision ground. Lean plier nose pulls, loops wire ends. Highly visible AWG and mm wire gauge sizes embossed in the metal. Comfort grips.
King Safety 46515 Wire Stripper with Handle Lock Vise Grip 2078309 Multi-Tool Cable Stripper/Crimper/Cutter Gardner Bender GS-361 Wire Stripper
Plier nose for pulling and looping wire. Scissor-type cutting blade. Ergonomic-shaped handles. Cuts and strips both solid and stranded wire. Spring automatically spreads handles. Slide lock. Wire sizes embossed in metal. Dimensions 6"/152 mm, minimum/maximum strip AWG 20-10, 0.8-2.6 mm. Multi-tool strips and cuts wire from 10-22 AWG. Pliers style nose allows pulling and looping wire. Bolt cutter leaves perfect lead thread. Induction hardened cutting edge. Wire crimper for insulated and non-insulated terminals. Meets or exceeds all ANSI standards. Strips solid or stranded wire. Laser-etched markings. Pliers nose and curved cutting blade for pulling and cutting wire. Power spring return reduces hand fatigue. Deluxe cushion grip. Looping hole forms wire to fit on screw terminal. Wire gauge number 16 - 30 AWG. 6-1/4" total length.
Gardner Bender GDT-311 3-Function Digital Multimeter Gardner Bender GK-15N Crimper/Stripper Kit Gardner Bender GCP-3400 High Leverage Linemans Crimping Tool
For testing AC/DC voltage and current resistance. Low battery indicator. DC voltage 600. AC voltage - 500 volts AC. Resistance - 2 meg Ohms. Input impedance of  10 meg Ohms. Rated CAT 111 600 volts, cETLus and CE. Uses one 9 volt battery, not included. Kit includes sleek multi-use stripper-crimper, 100 assorted insulated terminals in a convenient 11 compartment reclosable storage and carrying case. High-leverage tool with comfort grip handles, crimping die and side cutters. UL approved when used with GB #310, 410, and 411 crimp connectors for permanent connections.
King Safety 46522 UP Front Wire Crimper/Stripper Klein-Kurve Romex GRX-3224 Dual Cable Stripper Gardner Bender GPS-3228 Diagonal Cutting Plier
Wire sizes embossed in metal. Anvil-type wire cutter. Bolt cutting capabilities. Air pocket cushioned grip. Weight 8 oz/227g, dimensions 7.5"/190mm, minimum/maximum AWG 22-10, crimps AWG insulated/non-insulated 22-10/12-10, bolt cutter insulated 4-40/6-32/8-32/10-32/10-24. Strips outer sheath of 12/2 or 14/2 cable, strips single conductor 12 or 14 AWG. Cuts and rethreads bolt sizes 6-32 and 8-32. Curved cutting blade, pliers nose, wire looping hole. Locking handle and power spring return. Angled head allows cutting in tight locations. Dual cutting edge and high-leverage flared handle design for optimum gripping and cutting performance. Precision machined and induction hardened knives strengthen cutters and provide consistent performance when cutting aluminum, copper and medium-hard steel wire.
Mintcraft SE-923L Wire Stripper Klein Tools 2100-7 Electrician Scissor TESTER MULTI HOLIDAY BULB/FUSE
Automatic action stripper grips wire, cuts insulation cleanly, and strips solid or stranded wire with one squeeze. AWG size clearly marked at each cutting station. Adjustable guide provides consistent, uniform strip length. For telecom and electrical applications. Strong, tough tempered steel with nickel-plated finish. Upper blade has notches for stripping 19 AWG and 23 AWG wire. Scraper and file on outside of both blades. Serrated lower blade reduces slippage. 5-1/4'' length, .20 pounds. Holiday lights tester. Multi-purpose 12-600 VAC adjustable non-contact voltage tester with bulb and fuse tester, bulb puller. Bulb tester on the back tests both LED and incandescent light-string bulbs. Adjustable sensitivity non-contact voltage tester. 360 degree bright red light and an audible beeping indicate the presence of voltage. Requires 2 LR44 button cell batteries for operation (included). 7" height x 1.25" width x 1.2" length/depth.
Sperry VD6505 Adjustable Voltage Tester Coleman Cable 91241 Inglenook Outdoor Solar Lights Mintcraft KY-665T3L Wire Stripper
Sperry Voltage Tester, Adjustable, 12 - 1000 VAC, No, 32 - 104 deg F, ABS, Includes: (1) AAA Battery, cULus, CE Certified, Cat III 1000V, Cat IV 600V Safety Rating, For Indoor Applications Powered by the sun, no wiring required. Plastic frame construction, stained glass lens. Warm white LED never needs replacing. Wide angle beam. Installs in minutes with included screws. Will fit standard size 4" x 4" wooden fence posts. Rechargeable batteries included. Strips 10-24 AWG copper or aluminum wire, solid or stranded, cuts wire (HRC 40-50), crimps 10-22 AWG insulated, 4-22 AWG non-insulated and 7-8mm ignition terminals. Micro adjustable knob allows wire smaller than 24 AWG to be stripped. Easy-to-read wire size markings.
Gardner Bender GVT-392 Solenoid Activated Voltage Tester Channellock 957 Wire Stripper Gardner Bender GRX-122 Cable Stripper
Test AC/DC voltage from 120 - 480 volts, 50-60 Hz and DC polarity. Dual voltage indication: solenoid vibration and neon bulb. Neon bulb indicates DC polarity.  Probes lock together for one handed testing of standard outlets, separate for up to 4' reach. Tests outlets, panels, switches, circuit breakers and light fixtures. UL Listed. Designed to cut copper wire. Precision holes for wire stripping. Lean plier nose pulls and loops wire. Scissor-type blades are precision ground and heat treated to hold their edge. Highly visible AWG solid and AWG stranded wire gauge sizes embossed in the metal. Comfort grips. Strips AWG solid wire sizes: 10, 12, 14, 16, and 18 and strips AWG strainded wire sizes: 12, 14, 16, 18, and 20. Strips outer sheathing of NM cable. Pliers nose, curved cutting blade, curved spring action handles with air pocket cushion grips, wire looping holes. Laser etched markings for high visibility. Handles 12/2 NM cable and 12 AWG single conductor wire.
Channellock 908 Wire Stripper Gardner Bender GDT-3190 4-Function Digital Multimeter Strip-Easy SE SE-92 Adjustable Wire Stripper
Strips wire without damage to conductor. Cuts AWG 10-22 wire, bolts 10-24, 6-32, 8-32, 10-32 and 4-40. Crimps coax cable and 7-8 mm ignition cables. Channellock blue comfort grips.Easy-to-read wire size markings. Crimps both insulated and non-insulated wire. With protective rubber boot. For testing AC/DC voltage and current resistance. Tests 1.5 and 9 volt batteries. Low battery indicator, auto off. DC voltage 250. AC voltage - 500 volts AC. Resistance - 2 Meg Ohms. Input impedance of  10 meg Ohms. Rated CAT 111 600 volts, cETLus and CE. Uses one 9 volt battery, included. Automatic action, grips wire, cuts insulation cleanly, and strips solid or stranded wire with one squeeze. 8 to 22 AWG.
GB GMT-318 Analog Multimeter TESTER ELEC STOP SHOCK II     Gardner Bender PDB-66110 Combination Punch Down Blade
GB Analog Multimeter, 500 V, 250 mA, 50 k, -20 TO 56 dB Decibels, +/- 4 % Accuracy, Includes: Spare Fuse, ETL Listed, CE Certified, 6-Function, 14-Range Test GFCI receptacles and determine the appropriate wiring correction needed. Provides a clear and easy-to understand single LED readout indication for correct wiring or bad ground, open neutral, hot/gnd reverse, hot/neu reverse and open hot wiring errors. Includes a GFCI test function to test outlets wired in parallel to GFCI circuits (bathroom, kitchen and outdoor receptacles require GFCI protection). Hi-impact ABS housing with a 250 pound crush rating and the ability to withstand drops of up to 10 feet. Bright 360 degree viewable LED indicator light. Beeping audible indicator confirms test completion. 4" height x 2" width x 1.25" length/depth. Cut Style blade, 110-style used in CAT 3 and CAT 5 terminations (Cut), 66-style used to terminate phone wiring (Cut).
Klein-Kurve 11055 Wire Cutter/Stripper Gardner Bender SE SE-398 Cable Cutter/Stripper Klein-Kurve 11057 Wire Cutter/Stripper
Precision shear-type blades for clean cuts on solid and stranded copper wire. Easy-to-read markings on both sides. Curved handles help reach into confined areas. Wire looping and bending holes. Coil spring provides fast self-opening action. Precision-ground stripping holes. Serrated nose for easy bending, shaping, and pulling of wire. Screw-shearing holes. Closure lock for convenient storage. Double-dipped comfort grips. Strips and cuts 10 - 18 AWG solid and 12 - 20 AWG stranded. Cuts and strips RG-58, RG-59, RG-6, and RG-6 quad coaxial cable. Adjusts to various cable thickness. Precision shear-type blades for clean cuts on solid and stranded copper wire. Easy-to-read markings on both sides. Curved handles help reach into confined areas. Wire looping and bending holes. Coil spring provides fast self-opening action. Precision-ground stripping holes. Strong-gripping serrated nose for easy bending, shaping, and pulling of wire. Screw-shearing holes. Handy closure lock for convenient storage. Double-dipped comfort grips. Blue and red handles. Strips and cuts 20 - 30 AWG solid and 22 - 32 AWG stranded.
Gardner Bender SE SE-98 Adjustable Cable Cutter/Stripper Gardner Bender GMC-2000D Cable Crimper Circuit Alert GST-55M Voltage Sensing Wire Stripper
Adjusts to various cable thicknesses of RG-58, RG-59 and RG-6 coaxial cables. Rotary stripping, one-squeeze cutting action completely prepares coaxial cable ends for crimp fittings. Includes 1/4" replacement blades No. SERB-25. Used to produce patch cable and handset cables, cut, strip, and crimp. RJ-11 and RJ-45 plugs, 2, 4 and 8 pins. Carded. Strips and loops cable, crimps terminals and cuts and rethreads bolts. With ArmorEdge stainless steel construction for nick-resistant blades, overall durability and maximum corrosion resistance. Strips solid or stranded wire. Bolt cutting station, knurled pliers nose, wire looping stations and dual grip positions for traditional or forward hand positions. With CAM-10 snap-in removable sensor in the handle to detect AC voltage without contacting live wires. UL Listed. Carded.
Circuit Alert GPT-80 Voltage Sensing Long Nose Plier ArmorEdge GESP-55 Wire Stripper Channellock 909 Crimping Plier
Voltage-sensing long nose pliers cut wire and cable, crimp terminals and strip wires. Features over-molded, comfort grip, kurled plier nose and multi-purpose gripper, terminal crimping station and wire stripper for number 18 stranded and number 12 and 14 solid wire. With Cam-10 snap-in sensor to detect AC voltage without contacting live wires. Stainless steel blades, nick resistant wire cutter and rubber comfort grips. Has bolt cutting stations sizes 6-32 and 8-32, strips solid wire size 10-18, and stranded wire size 12-20. Clamshell. Precision crimping dies and cutters for both insulated and non-insulated solderless connections and terminals on 10 to 22 AWG wire. Slim nose shape for tight places. Made of heat treated polished high carbon forged steel. CHANNELLOCK BLUE comfort grips. 9-3/4" length, 15.04 oz.
Circuit Alert GST-224M Voltage Sensing Wire Stripper Klein Tools 11048 Wire Cutter/Stripper Klein-Kurve Romex K1412 Dual NM Cable Cutter/Stripper
Voltage sensing wire strippers warn of live wire (50-600 volt AC) by means of a sound and red LED lights. For use with solid number 14-12, and NM 14/2 and 12/2. Double bevel cutting blades. Spring action return, pliers nose, loop hole, and cushion grip. Stainless steel body, drop resistant construction. Cuts and rethreads bolt sizes 6-32, 8-32 and 10-32. cULus listed. Strips two wires in a single motion. Paired stripping holes for 14 and 12 AWG solid wire. One stripping hole for 10 AWG solid wire. Shear-type cutting blades for square, clean cuts. Narrow nose fits into tight places. Hardened steel with precision ground stripping holes. Spring-loaded action for self-opening. Precision-ground stripping holes for easy removal of insulation. Easy-to-read wire gauge markings on both sides for stripping in either direction. Black-oxide finish resists corrosion. Color-coded handles: red indicates stranded wire, yellow indicates solid wire. Textured handles provide a firm, comfortable grip. Wire looping and bending holes. Strips and cuts 10, 12, 14 AWG solid. With 12/2 and 14/2 stripping slots to quickly remove outer jacket of Type NM-B non-metallic-sheathed cable. Stripping holes remove insulation on 12 and 14 AWG lead wire. Narrow nose fits into tight places. Precision staggered shear-type blades for square, clean cuts on solid copper wire. Curved handles help reach into confined areas. Strong-gripping serrated nose; for easy bending, shaping and pulling of wire. Wire looping and bending holes. Screw-shearing holes. Coil spring provides fast self-opening action. Closure lock for storage. Double-dipped comfort grips. Yellow and white handle. Used for 12 & 14 AWG solid wire.
Apex 2162 Cable Crimper Circuit Alert GPT-90 Voltage Sensing Linemans Plier Gardner Bender GMT-319 19-Range Analog Multimeter
Cushion grip handles. Pliers nose has serrated jaw to pull, loop and twist wire. Crimper works on 7mm and 8mm non-insulated terminals and electrical 22-20 to 20-10 insulated terminals. Wire cutters and strippers at front of tool strip wire sizes 22-20 to 22-10. Bolt cutter cuts bolt sizes 4-40, 5-40, 6-32, 8-32, 10-32 and 10-24. Cuts wire and cable, crimps terminals and hammers staples. Over-molded, comfort grip, forged steel construction, features cross knurled jaws, built-in hammer head surface, terminal crimping station and precision hardened cutting blades. With Cam-10 snap-in sensor to detect AC voltage without contacting live wires. Compact, for testing AC/DC voltage to 1000 volt, DC current to 10 amp, resistance to 10 meg. and decibels from -8 to +62dB. Audible continuity, battery testing of 1.5 and 9 volt, manual range selection of 500 mA and 10 amp fuses. Includes batteries, test leads, spare fuse and operating instructions. UL Listed, CAT II 1000 volt rated.
Gardner Bender GTPS-3200 Cable Stripper Gardner Bender COM-310 Compression Cable Crimper ArmorEdge GESP-224 Cable Stripper
Compact design, strips UTP and STP CAT 3 and CAT 5, flat and round cable from 1/8" to 3/8" in diameter and silver satin and other flat cables. Tension release lever for positioning and release of cable. Compact size. Permanent connection, adds a water tight seal. For F-type RG-6, RG-6 Quad and RG-59. Symmetric handle style with stainless steel blades, nick resistant wire cutter and rubber comfort grips. Has bolt cutting stations sizes 6-32 and 8-32, and NM cable stripper for 14/2-12/2. Clamshell.
Gardner Bender ES-360 Electrician Scissor/Cutter Klein Tools 1010 All-Purpose Long Nose Plier TESTER ELEC 2N1 GFCI/NON CONT
Stainless steel precision hollow-ground and hardened for a long-lasting edge. Right and left handed users. For shearing soft cable, up to 22 mm diameter, insulation materials and electrical tape and stripping insulation. 5-1/2" full length, 1-5/8" cutting length. Cuts and strips wire; narrow, serrated pliers nose to pull, loop, and bend wire; long, curved cutting blade. Cutters and strippers are in front of the pivot for maximum ease of use in reaching into tight places. Crimps insulated and non-insulated terminals and 7 to 8 mm ignition terminals, cleanly shears bolts. Use on bolt sizes 4-40, 5-40, 6-32, 8-32, 10-32, 10-24, strips and cuts 10-22 AWG, connectors 10-22 gauge. Cushioned handles for comfort. DualCheck non-contact voltage tester and GCFI outlet tester. GFCI outlet tester on one end and a 50-1000V AC non-contact voltage tester on the other. Features a bright 360 degree LED visual indicator along with an audible beeping indicator of the presence of voltage. Single LED readout indicating correct wiring or bad ground, open neutral, hot/ground reverse, hot/neutral reverse, and open hot wiring errors. 250 pound crush rating and the ability to withstand drops of up to 10 feet. 7" height x 1.38" width x 1.2" length/depth.
Vise Grip 2078300 Self Adjusting Wire Stripper Circuit Alert GST-70M Voltage Sensing Wire Stripper ArmorEdge GESP-70 Wire Crimper/Stripper
Self-adjusting, strips wire from 10-24 AWG. Adjustable stopper controls the length of the core strip. Swivel knob micro-adjusts for gauges smaller than 20 AWG. Wire crimper crimps 10-22 AWG insulated, 10-22 AWG non-insulated and 7-9mm ignition terminals. Strips and loops cable, crimps terminals and cuts and rethreads bolts. With ArmorEdge stainless steel construction for nick-resistant blades, overall durability and maximum corrosion resistance. Strips solid or stranded wire. Bolt cutting station, knurled pliers nose, wire looping stations and dual grip positions for traditional or forward hand positions. With CAM-10 snap-in removable sensor in the handle to detect AC voltage without contacting live wires. UL Listed. Carded. Symmetric handle style with stainless steel blades, nick resistant wire cutter and rubber comfort grips. Has bolt cutting stations sizes 6-32, 8-32, 10-32, 4-40, 5-40 and 10-24, solid wire sizes 10-18 and 8-22, and stranded wire sizes 12-20, 10-24, and crimps coax cable and terminals. Clamshell.
GB-Gardner Bender CS550A Sperry Circuit Locators GB-Gardner Bender DM2A Sperry Pocket-Pro Digital Multimeters Klein 1001 Electricians Tool
Self-calibrating receiver with audible and visual indicators. Self-powered transmitter with audible and visual indicators. Working voltage range of 80-140 volts AC maximum to ground at 50-60 Hz. Operating temperature 32 to 122 degrees F. Storage temperature -4 to 158 degrees F. Power supply for the receiver is one 9 volt transistor type battery, not included. Transmitter is 3.3" height x 2.6" width x 1.1" depth, 2.5 oz. Receiver is 6.3" height x 3.4" width x 1.3" depth, 5.1 oz. UL Listed to both US and Canadian standards. With overload protection on all ranges, 3.75 digital liquid crystal display (LCD), maximum reading 3999. Maximum 450 volts. Range hold, continuity, diode test. Built-in test leads, 2 times per second sampling rate. Auto power off after approximately 10 minutes. Operating environment: 32 degrees to 104 degrees F. Storage temperature: -4 to 140 degrees F. 300 hours typical life with carbon zinc batteries. Operates from (2) LR44 batteries, included. C-77 booklet style carrying case and operating instructions included. cULus Listed to both US and Canadian standards. Meets CE requirements. 4-1/4" height x 2-1/4" width x 1/2" depth. Two wire cutters. Crimps 7-8 mm insulated and non-insulated terminals, lugs and splices. Cuts and strips stranded wire, shears bolts. Pivot nut adjusts tension. Full-sized, plastic-covered cushioned handles. Cuts bolt sizes 4-40, 6-32, 8-32, 10-24 and 10-32. Strips and cuts wire sizes 10 - 26 AWG stranded (4.0 - .14 mm) and 8 - 22 AWG solid (6.0 - .34 mm). Red handle, 8-1/2" length, .47 pounds.
Klein 626 6-in-1 Tapping Tool STRING LIGHT 30FT INCANDESCENT Reliance Controls THP103 Amwatt Appliance Load Testers
Forms new threads, re-forms burred or damaged threads, and cleans out obstructions. Automatically rethreads to the next larger size if threads are stripped. Cushion-Grip handle for greater torque and comfort. Accommodates tap sizes: 6-32, 8-32, 10-32, 10-24, 12-24 and 1/4-20. 7-3/4" length, .25 pounds. Incandescent bulbs. 30 feet long, 10 sockets, outdoor ? weatherproof. Includes 15 bulbs (5 extra). Bulbs spaced 3 feet apart. Heavy-duty 16/3 SJTW cord. Connect up to 13 strings of lights. 130 volts, E26 medium base. 11 watts S14 Incandescent bulbs. Wet location UL listed. Gives instant, accurate digital readout of 0-15.0 amp or 0-1875 watts used by common cord-connected household appliances and lights. Slide-switch instantly converts between amp and watts. 26" cord plugs in to 15 amp electrical outlet, appliance plugs into tester. Rugged, high-impact construction. UL listed.
GB-Gardner Bender TT64202 Cable Testers Klein 1005 Non-Insulated/Insulated Crimping Tool Maglite ARXX235 Rechargeable Alkaline Battery Pack
Tests all coax and Cat 3-6 patch cords and installed cables for opens, shorts, miswires, reversals and shield continuity. Hardened wire cutter in nose. Tapered nose design for working in confined spaces. Accommodates wire from No. 10 to 22 AWG. Crimps 10-22 AWG. Crimping die marked for insulated and non-insulated solderless terminals and connectors. Plastic-dipped, cushioned handles. Red handle, 9-3/4" length, .80 pounds. Replacement 6 volt battery for Mag Charger LED rechargeable flashlight.
Gardner Bender GBX-300 Flexible Cable Cutter Gardner Bender GMC-1145D Cable Crimper Sperry DM6250 Digital Multimeter
Cuts BX, MC, AC, and liquid tight 3/8". Durable blade provides 2 times normal wear characteristics. Pivot shaft is reinforced with a high strength steel sleeve. Passed 25 foot drop test. Quick-clamp feature automatically adjusts to cable size and secures it for splitting. Automatic release ejects cable. Cutting depth adjustment ensures clean cuts without nicking cable. Thumbwheel for easy blade change, no tooling required. Includes storage space for replacement blades. Used to produce patch cable and handset cables, cut, strip, and crimp. Works with RJ-11 and RJ-45 plugs, 2, 4 and 8 pins. Comfort grip handles, heat-treated steel frame. Standard batteries with auto shutoff to save battery life. Includes auto range, diode test, audible continuity, 7 function, 7 ranges (off included), 3999 display count. AC volts range positions: auto range (maximum 500 volt AC), 200 mV 2 volt, 20 volt, 200 volt, 500 volt. DC volts range positions: auto range (maximum 600 volt DC) 200 mV 2 volt, 20 volt, 200 volt, 600 volt. Resistance (Ohms) auto range (maximum 20 M) 200, 2k, 20k, 200k, 2M, 20M. Rated CAT III 600 volt. Uses 2 AAA batteries, included.
Gardner Bender GDT-3200 7-Function Digital Multimeter MULTI METER DIGITAL BLUETOOTH Gardner Bender TK-5HCN Household Tester Kit
With protective rubber boot. For testing AC/DC voltage, current resistance, diodes, temperature. Tests 1.5 volt batteries. Easy to read backlit display. Low battery indicator, auto off. Audible continuity. DC voltage 250. AC voltage - 500 volts AC maximum. Resistance - 20 Meg Ohms. Input impedance of  10 meg Ohms. Temperature test with probe -40 to 1832 degrees Fahrenheit. Magnetic strap included. Rated CAT 111 600 volts, cETLus and CE. Uses two AAA batteries, included. Reads voltage, current, resistance, temperature, and more with turn of the dial. It also allows a smartphone to serve as a second viewing screen. All data goes directly from the meter to the free ToolSmart smartphone app. Integrated non-contact voltage (NCV) detector. ETL certified safe for CAT III 600V use. Use a 9V battery (included). 5.8" x 2.9" x 2". Includes one pair of double-insulated test leads, Bead thermocouple probe and plug adapter, 9V battery and user's manual. Test all wiring applications in the home or office. Includes 4 high quality test products, the GVD-3504A non-contact circuit alert to test AC voltage presence, GFI-3501A ground fault receptacle tester to test correct wiring of outlets, GTT-3200 dual telephone line tester to check for proper wiring of telephone jacks and the GDT-311 5-function, 11-range digital multimeter with test leads to test AC and DC voltage, DC current, resistance, and continuity. Comes with a durable plastic case with a foam insert to protect and hold products in place.
SHOPLIGHT 2FT LED 18W LINKABLE LIGHT SHOP LED 5000L 48IN N/L SHOPLIGHT LED 4FT WHITE
SHOPLIGHT LED 4FT WHITE
Our Price: $44.34
Linkable 2' shoplight comes with a 5' power cord, 5' linking cable, end to end connector and chain packet to suspend. For workshops, hobby rooms, basements, sheds, garages and more. 18 watts, 120 volt, 1600 lumens, 4000K. Instant start down to -4 degreesF. 50,000 hours rated life. Energy Star and cUL Certified. LED shoplight, 40,000 hrs life, 45 in on/off pull cord, mounted with two 12-inch chains, powered by 5 ft. 18/3 SJT cord. LED shop light, 50,000 hour rated life. 28 watts,120 volts, 3100 lumens, 4000K. White housing with white ends and 5 foot white cord and plug. On/off pull chain. With 9-1/2" mounting chains and S hooks. Provides general illumination in residential and light commercial applications. Ideal for use in workshops, utility rooms, and garages. UL listed to US and Canadian safety standards. 46-5/8"L x 3-3/4"W x 2-3/8"H. 2 pounds.
LIGHT SHOP LED 4500 LUMEN 4FT LIGHT SHOP LED 3200LUMEN      SHOP LIGHT 3FT LED 42W 3200LMN
Shop light, LED, 4500L, White. 120V 40W LED with lens cover. 5' cord with 3-prong grounded plug. Mounting chains and "S" hooks included. Link up to 8 units. On/Off pull chain. Designed to be used anywhere a traditional fluorescent fixture is used. 3200 lumens, powered by 5? AWG cord 18/2, 40,000 hours of LED life. (2) 12 inch mounting chains and (2) hooks, on/off pull chain. 40 watts, 80 CRI, 4000K, 120 degree beam width. Non-Linkable, Long LED life, Lightweight and Powerful Replaces most applications using 2-light T8 fluorescent lamps. 4000K. UL/cUL Damp Locations, UV, IR and Mercury-free. Energy Star Certified.
Gardner Bender COM-320 Compression Cable Crimper FINDER CIRC BRKR UNIV YEL-BLK Sperry DM6450 Digital Multimeter
Compact size. Universal, works with most brands. Permanent connection, adds a water tight seal. Identify correct circuit breaker or fuse protecting a specific electrical circuit. Audible alert and bright LED visual indication. The signal is generated by a plug style tool that also verifies the correct wiring of outlets and includes GFCI test functionality. Magnetic back attaches to electrical panels for hands-free operation. 120 volt AC. Receiver operates from one 9 volt battery. UL Listed. Large display, includes test lead input icons for accurate lead placement. Includes auto range, diode test, audible continuity, 9 function, 10 ranges (off included), 3999 display count. AC volts range positions: auto range (maximum 750 volt AC) 4 volt, 40 volt, 400 volt, 750 volt. DC volts range positions: auto range (maximum 1000 volt DC) 400 M volt, 4 volt, 40 volt, 400 volt and 1000 volt. AC amps: auto range (maximum 10 amp AC) 400  uA, 4000 uA, 40 mA, 400 mA, 4 amp, 10 amp. DC amps: auto range (maximum 10 amp DC) 400 uA, 4000 uA, 40 mA, 400 mA, 4 amp, 10 amp. Resistance (Ohms) auto range (maximum 40 M) 400, 4k, 40k, 400k, 4M, 40M. Capacitance auto range 40 nF, 400 nF, 4 uF, 40 uF, 100 uF. Frequency auto range 10Hz to 100MHz. Rated CAT III 600 volt, CAT II 1000 volt. Uses one 9 volt battery, included.
PENDANT STAR MORVN MTL W/T-LHT LIGHT SHOP LINK 4000K 4FT 35W GB-Gardner Bender GCM-500 Lockjaw Volt/Ohm/Am Meters
Movarian Star, hanging, metal, Pendant light  with tea lights. Replaces most applications using 2-light T8 fluorescent lamps. 4000K. UL/cUL Damp Locations, UV, IR and Mercury-free. Energy Star Certified. Measures AC current and voltage, DC voltage and resistance. LockJaw feature enables jaw to open only when positioned in correct setting. Data hold feature retains values. Spare fuse included. SPECIFICATIONS: AC voltage-600, DC voltage-60, AC amp-600, Ohms 1M, Fuse-500mA, Total Ranges-8.
LIGHT STRING LED 24BULB 1920 L LIGHT LED VAPRTIGHT4FT 3600LMS Gardner Bender GCM-221 Clamp-On Multimeter
LED String Lights. 24 Bulbs Multi-volt LED fixture, has a high impact poly-carbonate diffuser. 43 watts, 120-277 volts, 3600 lumens, 4000K, 86CRI. 50,000 hours rated lifetime. UL/cUL Wet Locations, IP65 Rated. Energy Star. 47.7" Length x 4.57" Width x 2.91" Height. Measures AC current and voltage, resistance and continuity. Auto ranging feature selects proper range for function. Accommodates conductors up to 1" in diameter. Data hold feature retains values. 2 AAA batteries included. SPECIFICATIONS; AC voltage-600 volt, AC current-600 amp, Resistance-200 Omega. Accuracy: AC voltage +1.5 percent, AC current +2.0 percent, Resistance +1.0 percent. Total ranges - 3.
LIGHT SHP LNKBL LD 4FT 10000 L LIGHT SET STRING D/C MTL 10PC
LED Shop Light, Linkable, 10,000 Lumens, 80 CRI, 120? Beam Angle, -4122?F Operating Temp, Connect Up To 3 Lights. Includes: 2) 12" Hanging Chains, (1) 10' Link Cord And (1) Link Cord Connector. 4000 K, Average Life/Hours: 50,000. Lamp Wattage: 80~
   
 
1