Home > ELECTRICAL > SPECIALTY ELECTRICAL > BATTERIES > AAA BATTERY/BATTERIES
Sort By:
1
Thomas & Betts B118A Switch Box Thomas & Betts B120A-UPC Switch Box Thomas & Betts B122A-UPC Wall Box
With captive nails. Four integral clamps, two each end. Meets NEMA OS-2, UL Listed, classified for fire wall assemblies. With captive nails. Four integral clamps, two each end. Meets NEMA OS-2, UL Listed, classified for fire wall assemblies. With captive nails. Four integral clamps, two each end. Meets NEMA OS-2, UL Listed, classified for fire wall assemblies.
Thomas & Betts BH122A-UPC Outlet Box Raco 8977 Electrical Box Supports Thomas & Betts B114R-UPC Switch Box
Lightweight design and durable plastic. Listed for masonry walls. Safe to install and will never rust or corrode. Includes nails for quick, easy installation. 22 cubic inch rigid wall. 3-7/8" x 2-3/8" x 3-3/4". UL Listed. Use two to mount switch box with plaster ears to hollow wall. Slips between box and wall, tabs bend inside box. Old work wall case. Safe, non-conductive. Two Zip-Mount retainers. Four integral clamps, two each end; mounting ears. 14 cubic inch,  2-3/4" x 2-1/4" x 4-1/8". UL Listed.
Thomas & Betts B232A-UPC Outlet Box Thomas & Betts B520A-UPC Ceiling Box Duracell PX76A675PK Non-Rechargeable Cylindrical Alkaline Battery
New work safe, non-conductive. With captive nails. Eight integral clamps, four each side. 32 cubic inches. Meets NEMA OS-2, UL Listed, classified for fire wall assemblies. 3" depth x 4" x 3-3/4". With captive nails. 3/0 - 4/0 combination. Fixture spacing for 2-3/4" - 3", 6 integral clamps. 4" diameter non-metallic ceiling box, 20 cubic inch volume. Listed for fixture support up to 50 lb. 4" diameter x 2-1/4" depth. Meets NEMA OS-2, UL Listed. RoHS Compliance. Lasts longer in electronic devices.
Halex 26279 Switch Box Support Thomas & Betts B108B-UPC Outlet Box Thomas & Betts B108R-UPC Outlet Box
Use to suport attachment of an outlet box in drywall, paneling, etc., in the absence of a structure member. Installed in pairs. New work applications, shallow PVC switch box. Integral brackets. 1-1/4" depth x 2-3/8" x 3-5/8". UL Listed. Designed and listed for use with non-metallic sheathed cable. With mounting ears. Permissible for use with 90 degree C connectors. 8 cubic inch capacity. 1-1/4" depth x 2-3/8" x 3-5/8". UL Listed.
Carlon B118B-UPC Switch Box Allied Moulded 1098-N Switch Box Carlon B1EXT-CRD Electrical Box
Safe, non-conductive. With bracket for 3/8" to 5/8" wallboard. Steel and wood studs, 4 knockouts. 2-15/16" depth x 3-3/4" x 2-1/4". Thermoset-fiberglass, with angled mid-nails. Nails are installed as fastening devices. 2 hour wall and ceiling fire rating. Lightweight, non-corrosive, non-conductive, no ground required, will not melt or distort in high heat. Shatter resistant in cold temperatures. UL Listed. Extends an existing box by 1-1/8". Used to correct problems from remodeling where the wall surface is extended. Fits between the wiring device and the wall surface. Extends the switch or outlet box to flush with the wall. Works with all standard wiring devices. 2-1/4" x 3-1/4". UL Listed.
Thomas & Betts SC100RR Low Voltage Box Raco 7887RAC Old Work Cable Box Allied Moulded 1099-N Switch Box
For telecommunications and other low voltage wiring. Suitable for old work applications. 1.18" depth x 2.18" x 3.05". Plaster ears, old work swing style clips secure box in wall. Integral clamps. Two hour fire rated. Mounting clips. 3" depth. 14.0 cubic inch capacity. UL Listed. Thermoset-fiberglass, with angled mid-nails. Nails are installed as fastening devices. 2 hour wall and ceiling fire rating. Lightweight, non-corrosive, non-conductive, no ground required, will not melt or distort in high heat. Shatter resistant in cold temperatures. UL Listed.
Carlon Flex-Plus A58381D-CAR ENT Flexible Raceway Switch Box Carlon Flex-Plus A58381E-CAR ENT Flexible Raceway Switch Box Carlon B518A-UPC Ceiling Box
Non-metallic, non-conductive. Punch type knockout. Quickly connects. Square, fits commercial and residential requirements. For 600 volt use in ceilings, floors, and walls in commercial, industrial and residential buildings not more than three floors above grade. Colored in brilliant electric blue. 3" x 2-1/4" x 1-7/8". UL Listed. Non-metallic, non-conductive. Punch type knockout. Quickly connects. Square, fits commercial and residential requirements. For 600 volt use in ceilings, floors, and walls in commercial, industrial and residential buildings not more than three floors above grade. Colored in brilliant electric blue. 3" x 2-1/4" x 1-7/8". UL Listed. With captive nails. 18 cubic inch volume. Listed for fixture support up to 50 lb. 3" diameter x 2-3/4" depth. Meets NEMA OS-2, UL Listed.
Raco 8196 Electrical Box Carlon A615DE-CAR Flexible Raceway Ceiling Box Thomas & Betts B120R Outlet Box
Six 1/2" and 3 TKO conduit knockouts (sides). Three 1/2" and 2 TKO conduit knockouts (bottom). Combination cover screw heads provide for faster mudring/cover installation. FM bracket mounts flat on side of stud and provides a rigid, secure box installation. Square boxes are installed in ceiling or walls for lighting fixture or receptacles. 4" square x 1-1/2" deep - 21.0 cubic inches. UPC bar code. UL Listed. Safe, non-conductive. Quick connect. 20.5 cubic inch capacity. Knockouts 1/2" x 3/4". 4" diameter x 2-1/8" depth. With mounting ears and swing bracket. 4 integral clamps, 2 each end. UL Listed, meets NEMA OS-2. Suitable for masonry walls, not UL Classified for Fire Resistance. PVC construction. 20 cubic inch capacity. 3-5/8" depth x 2-5/16" x 4-1/8".
Coleman 95504 Low Voltage Light Bulb Coleman 95503 Low Voltage Light Bulb Thomas & Betts B618RR Ceiling Box
Clear replacement bulb. Clear replacement bulb. Round old work box with 4 integral swing clamps. Three zip mount retainers. High temperature resistant. 4-1/4" diameter x 2-3/4" depth. UL Listed.
Raco 8197 Welded Electrical Box Duracell MN27BPK Alkaline Battery Thomas & Betts BH235A Outlet Box
Square 4" steel box for lighting fixtures, switches or receptacles where multiple conductor runs are split into two or more directions to bring power to a number of electrical devices. 1-1/2" deep. 21.0 cubic inch capacity. Welded, with six 1/2" and three TKO  side knockouts, three 1/2" and two TKO  bottom knockouts. Flush FH bracket type for side mount of stud and features hooks that drive into face of wood stud for hands-free installation. UL Listed. Used mainly for security applications such as car remotes. PVC handy box used for many wiring applications. Weather-resistant and nonconductive. Will accept metal handy box covers or nonmetallic covers. 35 cubic inch rigid wall.
Carlon B520P-UPC Ceiling Box Carlon A521DE ENT Flexible Raceway Outlet Box Carlon Super Blue BH525A-UPC Ceiling Box
Ceiling box with captive nails, ground lug and screw attached. Fixture spacing for 2-3/4" and 3-1/2". 6 integral clamps. Listed for fixture support up to 50 lb. 4" diameter x 2-1/4" depth. UL Listed. Meets NEMA OS-2. Non-metallic. Non-conductive. Suitable for masonry walls. 4" x 4" x 1-1/2". 1/2" and 3/4" knockouts. UL Listed. Rigid polycarbonate box used for decorative light fixtures or low voltage devices. Made of a heat resistant thermoplastic material that is lightweight, noncorrosive and nonconductive. Captive nails, 25 cubic inch, 3" deep, large capacity boxes for specialty lighting, track lighting, or smoke/security devices. Listed for fixture support up to 50 lbs. Includes mounting hardware. UL Listed.
Carlon SC100A 1-Gang Low Voltage Mounting Bracket Raco 473 Gangable Switch Box Carlon Super Blue BH614R Old Work Ceiling Fan Box
Backless bracket with nail on mounting and screw in bracket. Non-metallic. Non-conductive. 3.73" x 2.32". Gangable 3" x 2" switch box, offers the option of constructing a box to hold two or more devices. Beveled corners prevent the clamp screws from protruding into the back wall. With nonmetallic sheathed cable clamps. Acceptable for use in 2-hour fire rated walls. Four cable knockouts (end). Two 1/2" conduit knockouts (end). 1/2" conduit knockouts (bottom). With leveling bumps. No plaster ears, not suitable for old work.  2-1/4" deep - 10.5 cubic inches. UL Listed. Spring metal mounting brackets. Fixture rating limit of 10 pounds. Heat resistant. 3-1/2" diameter round old/new work box base, ears and snap-in bracket. UL Listed.
Carlon SC200RR Low Voltage Old Work Bracket Raco 8292 Ceiling Pan Box Raco 528 Gangable Switch Box
For installation of low-voltage devices in an existing wall. Thinner rectangular flange for faster, easier installation, less protrusion on the wall. Shallow bracket means less material, easier to work with. Can be installed vertically or horizontally. UL listed. Non-metallic sheathed cable wiring system. Clamps in bottom. Four cable knockouts, one 1/2" conduit. 3-1/2" diameter x 1/2" depth. UL Listed. Four cable knockouts (end). Two 1/2" conduit knockouts (end). One 1/2" conduit knockout (bottom). With non-metallic sheathed cable clamps. Leveling bumps. Less ears. 3" x 2" x 2-1/2" deep. 12.5 cubic inches. Acceptable for use in 2-hour rated fire walls. UL Listed.
Raco 161 Drawn Electrical Box Hubbell 8500 Gangable Switch Box Carlon B418A-UPC Shallow Outlet Box
Drawn metal 4" octagon box used in the installation of ceiling or wall lighting fixtures or as a junction box. Not designed for ceiling fan support. Maximum recommended support load for a  static fixture is 50 lb. TS bracket for wood or metal studs features gauging tabs and recessed nailing spurs. 1-1/2" depth, 1/2" bracket setback, three 1/2" side knockouts, five 1/2" bottom knockouts. 15.5 cubic inch capacity. Combination screw heads allow for fast cover or fixture installation. Acceptable for use in 2-hour rated walls and ceilings. UL Listed. Conduit wiring system. Four 1/2" conduit knockouts (sides). Two 1/2" conduit knockouts (end). Two 1/2" conduit knockouts (bottom). Less clamps. 3" x 2" x 2-1/2" deep. 12.5 cubic inches. Acceptable for use in 2-hour rated fire walls. UL Listed. With captive nails and ten integral clamps, three top and bottom, two each side. Suitable for masonry walls. 4" x 4" square. UL Listed.
Thomas & Betts B225R-UPC Outlet Box Carlon Super Blue BH525P Ceiling Box Raco 400 Gangable Switch Box
With mounting ears and 2 swing clamps. Suitable for masonry walls, UL Listed, not UL Classified for fire resistance. 2-3/4" depth x 3-1/8" x 3-15/16" Combination ceiling box, hard shell with captive nails and grounding lug. 3" depth. Listed for fixture support up to 50 lb. 4.062" diameter x 3" depth. UL Listed. Gangable 3" x 2" switch box, offers the option of constructing a box to hold two or more devices. Two 1/2" conduit knockouts (end). One 1/2" conduit knockout (bottom). Plaster ears allow the box to be used in old work applications. Acceptable for use in 2-hour rated fire walls. 1-1/2" deep - 7.5 cubic inches. UL Listed.
Thomas & Betts B121ADJ Wall Box Hubbell 8293 Ceiling Pan Box Thomas & Betts B344AB-UPC Outlet Box
Provides simple installation and allows adjustment from 0 to 1-3/4" with the turn of a screw. Clip the included bracket onto any stud, mounts square and secure every time. Securing the bracket to the stud ensures that the box will not move. Comes preset at 1/2". 3-3/8" depth x 3-7/8" x 3-3/4". Permissible for use with 90 degree C connectors. Satisfies NEC 370-20. UL Listed 5Z74 and classified 2 Hr W/C. Five 1/2" bottom conduit knockouts, 6 cubic inch capacity. Acceptable for use in 2-hour rated walls and ceilings. 4" diameter x 1/2" depth. UL Listed. With captive nails and bracket support, twelve integral clamps, six each side. 44 cubic inch capacity,  2-11/16" depth x 3-3/4" x 5-5/8". Meets NEMA OS-2, UL Listed, classified for fire wall assemblies.
Hubbell 519 Gangable Switch Box Hubbell 8531 Gangable Switch Box Raco 404 Non-Gangable Shallow Switch Box
Four cable knockouts (end). One 1/2" conduit knockout (bottom). With clamps for non-metallic sheathed cable. 3" x 2" x 2-1/2" deep - 12.5 cubic inches. Adjustable plaster ears allow box to be used in old work applications. Acceptable for use in 2-hour rated fire walls. Four cable knockouts (end). Two 1/2" conduit knockouts (end). One 1/2" conduit knockout (bottom). With non-metallic sheathed cable clamps. "TS" brackets for wood or metal studs. Gauging tabs and recessed nailing spur. Side mount. 3" x 2" x 2-1/2" deep. 12.5 cubic inches. UL Listed. Shallow switch box, made for use with furring strips and 1/4" paneling. Welded, with nonmetallic sheathed cable clamps. Two cable knockouts (end). One 1/2"' conduit knockout (end). D bracket for wood or metal studs. 1/4" bracket setback. 1" deep - 6.5 cubic inches. UL Listed.
Hubbell 471 Gangable Switch Box Hubbell 410 Non- Gangable Switch Box Carlon B117RSW Old Work Shallow Outlet Box
Beveled corner box, designed to prevent the clamp screws from protruding into back wall. Non-metallic sheathed cable clamps. Acceptable for use in 2-hour rated walls. Four cable knockouts (end). One 1/2" conduit knockout (bottom). No bracket, clamp screws through beveled corners. With ears. 3" x 2" x 2-1/4" deep. 10.5 cubic inches. UL Listed. Four cable knockouts on the end. 3" x 2" x 1-1/2" deep. 7.5 cubic inches. With clamps for non-metallic sheathed cable. Plaster ears allow the box to be used in old work applications. Acceptable for use in 2-hour fire rated walls. UL Listed. Shallow box, flanged, non-metallic and non-conductive. 2" depth x 4-1/4" width x 4" length.
Zero-Mercury A76 Miniature Alkaline Battery Raco 420 Gangable Switch Box Raco 560 Gangable Switch Box
Designed for electronic applications which may require high rate pulses. Replaces AG13, LR1154, EPX76, A76, LR44, SR44SW/W; Duracell LR44, Energizer A76, Panasonic L44, Panasonic LR44, Rayovac 867, Rayovac RW51, and Varta V13GA. 11.6mm diameter x 5.4mm height. 150 MAH to .9 volt. 1.5 volt, carded. Gangable 3" x 2" switch box, offers the option of constructing a box to hold two or more devices. Plaster ears allow the box to be used in old work applications. Acceptable for use in 2-hour fire rated walls. Four 1/2" conduit knockout (sides). Two 1/2" conduit knockout (end). Two 1/2" conduit knockouts (bottom). 2" deep - 10.0 cubic inches. UL Listed. For conduit. 3" x 2" switch box. No bracket, adjustable plaster ears allow box to be used in old work applications. 14.0  cubic inch capacity, 2-3/4" deep, four 1/2" side knockouts, two 1/2" bottom knockouts and two 1/2" end knockouts. Acceptable for use in 2-hour rated fire walls. UL Listed.
Raco 8355 Non-Gangable Switch Box Energizer E92BP-2 Non-Rechargeable Alkaline Battery Raco 7488RAC Old Work Cable Box
Four cable knockouts (ends). One 1/2" conduit knockout (bottom). With clamps for non-metallic sheathed cable. "S" backset. Mounting guides set 3/8", with bumps. Angle nail type. 3" x 2" x 2-27/32" deep, 15.8 cubic inch capacity. Prepositioned mounting nails included. Acceptable for use in 2-hour rated walls. UL Listed. Formulated to provide dependable, long-lasting power. Use in toys, audio devices, flashlights, electronic devices, remote control communication devices, smoke detectors and security systems. Plastic label jacket. Up to 80 percent capacity remaining after 7 years of storage. 1.5 volt, 25 mA continuous drain at rated capacity. Operating temperature 0 to 130 degrees F. Carded. Old work PVC box. With swing clips and integral clamps to hold securely. 3-5/32" depth. 25.0 cubic inch capacity.
Allied Moulded 9363-EWK Old Work Switch Box Raco 920 Steel Bar Hangers Thomas & Betts B620KR-UPC Ceiling Box
Thermoset-fiberglass with ears, wing brackets, speed clamps. 2 hour wall and ceiling fire rating. Lightweight, non-corrosive, non-conductive, no ground required, will not melt or distort in high heat. Shatter resistant in cold temperatures. 2-7/8" x 2-3/8" x 3-1/4". UL Listed. Holding prong, box clip holds box in place for nailing. Design resists bending and twisting. With stud. Length 14-1/4" thru 22-1/2". With locking tabs to hold bar in position. UL Listed. Ceiling box with 14.38"-22.5" adjustable bar hanger. 4" diameter x 2-1/4" depth. Fixture spacing for 2-3/4" and 3-1/2". Integral clamps. Listed for fixture support up to 50 pounds. UL Listed.
Raco 567 Gangable Switch Box Thomas & Betts B432A-UPC Outlet Box Raco 976 Extension Ring Switch Box
Four 1/2" conduit knockouts (sides). Four cable knockouts (end). Two 1/2" conduit knockouts (end). One 1/2" conduit knockout (bottom). With non-metallic sheathed cable clamps. 3" x 2" x 2-3/4" deep. 14.0 cubic inches. Acceptable for use in 2-hour rated fire walls. UL Listed. With captive nails and ten integral clamps, three top and bottom, two each side. Suitable for masonry walls. 4" x 4" square. UL Listed. Add-A-Depth ring used to correct for a 3" x 2" switch box or 4" square box (2 needed) set too deep in a wall. Adjustment range 1/4" to 1", two 1-1/8" long screws included. UPC bar code.
Duracell DL2450BPK Coin Cell Battery Allied Moulded 9351-NK Outlet Box Thomas & Betts BH353A Lightweight Outlet Box
Primary usage is for keyless entry. Lasts longer than alkaline. Ceiling box with nails, speed clamps. 50 lb. fixture rated. 2 hour wall and ceiling fire rating classification. 4" diameter x 2-3/8" depth. UL Listed. Lightweight design and durable plastic. Safe to install and will never rust or corrode. Includes hardware for easy installation. Rigid wall box.
Quantum 66248 Alkaline Battery Thomas & Betts SC200DV Dual Voltage Outlet Box Allied Moulded 9361-ESK Old Work Switch Box
Lasts longer in high-drain and frequently used devices that require high battery output like video game controllers and high-powered flashlights. Duralock technology. With power check. Enables line voltage and low-voltage to run to the same location. Uses standard 2 gang faceplate. Backless design accommodates large/deep low voltage devices. 3.69" x 4.04". 20.5 cubic inch capacity. UL approved. Thermoset-fiberglass with ears, snap bracket, speed clamps. Lightweight, non-corrosive, non-conductive, no ground required, will not melt or distort in high heat. Shatter resistant in cold temperatures. 2 hour wall fire rating. 2-7/8" x 2-3/8" x 3-1/4". UL Listed.
Eveready 1212 Non-Rechargeable Super Battery Raco 164 Electrical Box Hubbell 518 Gangable Switch Box
Metal jacket, 1.5 volt, 25 mA continuous drain at rated capacity. Operating temperature 0 to 130 degrees F. Carded. Four cable pryouts and one 1/2" KO side, one - 1/2" KO bottom. Octagon boxes are used in the installation of ceiling or wall light fixtures. TS bracket features gauging tabs and recessed nailing spurs, for wood or metal studs. Acceptable for use in 2-hour fire rated walls and ceilings. 1-1/2" deep - 15.5 cubic inches. UL Listed. UPC bar code. One 1/2" bottom conduit knockout, four bottom cable knockouts. With armored cable/metal clad/flex clamps. Adjustable plaster ears allow box to be used in old work applications. Acceptable for use in 2-hour rated walls. 2-1/2" deep - 12.5 cubic inches. UL Listed. UPC bar coded.
Thomas & Betts B232B-UPC Outlet Box Raco 223 Electrical Box Coleman 95529 Low Voltage Light Bulb
With bracket for 3/8" to 5/8" wallboard steel or wood stud mounting and 8 integral clamps, 4 each side. 3-3/4" x 4" x 3". Four cable knockouts (sides). Two 1/2" and one TKO conduit knockouts (sides). One 1/2" conduit knockout (bottom). With non-metallic sheathed cable clamps. FM flush side-mount bracket for wood or metal studs. Square boxes are installed in ceilings or walls for lighting fixtures or receptacles. Acceptable for use in 2-hour fire rated walls. 4" square x 1-1/2" deep - 21.0 cubic inches. UPC bar code. UL Listed. Clear replacement bulb.
Carlon Super Blue BH118R Old Work Outlet Box Cutler Hammer BRFPP Filler Plate Raco 529 Gangable Switch Box
Lightweight, noncorrosive, and nonconductive, rigid, nonmetallic wiring box combines features of hard shell thermoset box and thermoplastic PVC style box. Molded of specially formulated, strong thermoplastic material, will not crack or break, even in extreme environments. Resists flexing and holds shape even under the worst conditions. Provides large wirefill capacity, and comes with molded-in nailing flanges and molded-in swing clamps to make installation faster. Designed to nest inside one another to take up less shelf space and are easier to transport to job sites. 3.85" x 2.41". UL Listed. Plastic (snap-in) for type BR 1" space. May also be used with 400 amp and 600 amp load centers. Four cable knockouts (end). Two 1/2" conduit knockouts, (end). One 1/2" conduit knockout (bottom). "LB" bracket for wood studs, 5/8" offset to clear narrow door molding. Face mounts on front edge of wood stud. Use when space between studs is limited. With clamps for non-metallic sheathed cable. 3" x 2" x 2-1/2" deep. 12.5 cubic inches. UL Listed.
Carlon A122 ENT Flexible Raceway Outlet Box Raco 545 Non-Gangable Old Work Switch Box Coleman 95527 Low Voltage Light Bulb
Eccentric knockouts, non-metallic and non-conductive. Can be mounted to wood or steel studs. 3.53" height x 2.10" width x 3.25" depth. Four cable knockouts (end). Two 1/2" knockouts (end). With NMSC, non-metallic sheathed cable clamps. Old work clip. 3" x 2" x 2-1/2" deep - 12.5 cubic inches. Acceptable for use in 2-hour rated fire walls. UL Listed. Clear replacement bulb.
Allied Moulded 2300-NK Switch Box GROUND BAR 7 HOLE CONSUMER PK Raco 508 Non-Gangable Switch Box
Thermoset-fiberglass, with angled mid-nails, speed clamps. Lightweight, non-corrosive, non-conductive, no ground required, will not melt or distort in high heat. Shatter resistant in cold temperatures. 2 hour wall fire rating. 3" depth x 4" x 3-3/4". UL Listed. For grounding copper or aluminum terminals in a GE load center. Offers 4 small holes for 14 - 8 AWG copper or 12 - 8 AWG aluminum terminals and 3 large holes for 14 - 4 AWG copper or 12 - 4 AWG aluminum terminals. UL Listed and ANSI Certified. 6.875" height x 2.875" width x 0.5" depth, .105 lb. Two 1/2" conduit knockouts (end). Old work clips. Provided U box support eliminates the need for additional box supports to secure box in wall opening. For 3/4" sheetrock maximum thickness. Acceptable for use in 2-hour fire rated walls. 12.5 cubic inches. 3" x 2" x 2-1/2" deep. UL Listed.
Raco 487 Gangable Old Work Switch Box Raco 8601 Gangable Switch Box Thomas & Betts B708-SHK Ceiling Pan Box
Four cable knockouts (end). One 1/2" conduit knockout (bottom). Clamp screws through beveled corners. With clamps for non-metallic sheathed cable. Adjustable plaster ears allow box to be used in old work applications. Old work clips on side of box eliminates the need for additional box supports to secure box in wall opening. 3" x 2" x 2-1/4" deep. 10.5 cubic inches. Four 1/2" conduit knockouts (sides). Four cable knockouts (end). Two 1/2" conduit knockouts (end). One 1/2" conduit knockout (bottom). With non-metallic cable clamps in each end. 3" x 2" x 3-1/2" deep. 18.0 cubic inches. Adjustable plaster ears allow box to be used in old work applications. Acceptable for use in 2-hour rated walls. UL Listed. Shallow ceiling fan outlet box with mounting screws. 1 integral clamp. Non-conductive high impact lightweight PVC. 5 knock outs, 8 cubic inch capacity. For new work or renovations. Mounts ceiling fan securely to the ceiling joist. Rated for fans up to 35 pounds and fixture up to 50 pounds. 4" diameter x 5/8" depth. UL Listed.
Raco TigerGrip 523 Gangable Old Work Switch Box Carlon B620HG-UPC Ceiling Box Carlon Super Blue BH234R Old Work Outlet Box
One 1/2" bottom knockout. Four cable knockouts. 2-1/2" deep x 12.5 cubic inches. Armored cable/metal clad/flex clamps. Old work clips on side of box eliminates the need for additional box supports to secure box in wall opening. Acceptable for use in 2-hour rated walls. UL Listed. UPC bar coded. Non-metallic sheathed cable clamps. Ceiling box with 14 -1/4" - 23-1/2" adjustable bar hanger. Fixture spacing for 2-3/4" and 3-1/2". 4" diameter x 2-1/4" depth. Ground lug and screw. 6 integral clamps. Listed for fixture support up to 50 lb. UL Listed, meets NEMA OS-2. Lightweight, noncorrosive, and nonconductive, rigid, nonmetallic wiring box combines features of hard shell thermoset box and thermoplastic PVC style box. Molded of specially formulated, strong thermoplastic material, will not crack or break, even in extreme environments. Resists flexing and holds shape even under the worst conditions. Provides large wirefill capacity, and comes with molded-in nailing flanges and molded-in swing clamps to make installation faster. Designed to nest inside one another to take up less shelf space and are easier to transport to job sites. 3.85" x 4.17". UL Listed.
Energizer ECR1616BP Coin Cell Battery Thomas & Betts B355R Outlet Box Raco 2011FBAR Vapor Barrier Box
Replaces all 1616 batteries. 16.0mm diameter x 1.6mm height. Lithium / Manganese Dioxide (Li/MnO2). 55 mAh (to 2.0 volts). Carded. UL Listed: MH12454. Extra large box. 6 clamps to hold cable, swing out clamps to hold to the wall. Engraved with NEC approved conductor fill. 13" x 6.25" x 8". UL Listed. Made from rugged polycarbonate material, yellow color, gasket seals all openings to prevent air or vapor penetration. Front-mounted ground screw, 1/2" setback, flush bracket. Self-clamping, nonmetallic sheathed cable entry tabs.
Coleman 95518 Low Voltage Halogen Lamp Coleman 95517 Low Voltage Halogen Lamp Coleman 95507 Low Voltage Halogen Lamp
Landscape lighting clear replacement bulb. Landscape lighting T3 clear replacement bulb. Landscape lighting clear replacement bulb.
Coleman 95508 Low Voltage Halogen Lamp Sliderbox SB Adjustable Switch/Receptacle Outlet Box Raco 8235 Electrical Box
Landscape lighting clear replacement bulb. Molded of engineering grade non-metallic thermoplastic. Adjustable, no need to remove or relocate mounting screws to re-position the box. Slots retain slider plate and guide it in a straight motion. Internal rails guide slider plate for smooth mounting adjustability in wall substrates from 1/2" to 1-3/8" thick and ceiling substrates from 1/2" to 1-5/32". Square corner design allows easy wall cut-in (Old work applications). Molded spline device holes for quick device screw installation. 23 cubic inch volume, 1/2" knockout. Internal steel, stud/wood screws. 3-9/16" depth x 2-1/4" width x 3-3/4" height. UL Listed for 2 hour fire resistive walls and ceilings. Installed flush in ceilings or walls for lighting fixtures, switches or receptacles, used where multiple conductor runs are split into two or more directions to bring power to a number of electrical devices. Combination cover screw heads for faster mud ring/cover installation. TS bracket for wood or metal studs, features gauging tabs and recessed nailing spurs. Fixture support of 6 lb. maximum. 30.3 cubic inch capacity 4" square x 2-1/8" depth with 6 eccentric 1/2" and 3 TKO side knockouts and 3 eccentric 1/2" and 2 TKO bottom knockouts. Acceptable for use in 2-hour fire rated walls. UL Listed.
Raco 295 Ceiling Fan Box Coppertop MN2400B4Z AAA Alkaline Battery Eveready Gold A92 Alkaline Battery
Ceiling fan 4" round pan, 1/2" deep, 6 cubic inches, 5 bottom 1/2" knockouts. Used for new work and renovations. Ceiling fan rated, used in the installation of heavy light fixtures or ceiling fans. Maximum 70 pound fan or 150 pound fixture. Includes nonmetallic sheathed cable connector, mounting hardware, and instructions. Acceptable for use in 2-hour rated walls and ceilings. UL Listed. High energy density, capable of performance at high discharge rates. Typical temperature range: -4 to 130 degrees F. Up to 85 percent capacity remaining after 4 years of storage at 70 degrees F. Plastic label jacket. Up to 80 percent capacity remaining after 7 years of storage. 1.5 volt, 25 mA continuous drain at rated capacity. Operating temperature 0 to 130 degrees F. Carded.
Raco 605 Gangable Switch Box Energizer A23 Miniature Alkaline Battery Carlon B455A-UPC Outlet Box
Four 1/2" conduit knockouts (sides). Four cable knockouts (end). Two 1/2" conduit knockouts (end). One 1/2" conduit knockout (bottom). 3" x 2" x 3-1/2" deep. 18.0 cubic inches. With clamps for non-metallic sheathed cable. "TS" brackets for wood or metal studs. Gauging tabs and recessed nailing spur. Side mount. UL Listed. Designed for electronic applications which may require high rate pulses such as remotes and cameras. Cell is eight No. LR932 batteries in series in a battery stack. 65 mAH. Carded. Safe, non-metallic, non-conductive. Molded instructions. 12 integral clamps, 6 each side. Bracket and captive nails included. 2-1/2" depth x 3-7/10" x 7-3/5".
Carlon Super Blue BH525H Ceiling Box GE THFILLER Rectangle Filler Plate Energizer E92BP-4 Non-Rechargeable Alkaline Battery
Lightweight, noncorrosive, and nonconductive, rigid, nonmetallic wiring box combines features of hard shell thermoset box and thermoplastic PVC style box. 4" diameter x 2.95" depth. Molded of specially formulated, strong thermoplastic material, will not crack or break, even in extreme environments. Resists flexing and holds shape even under the worst conditions. Provides large wirefill capacity, and comes with molded-in nailing flanges and clamps to make installation faster. Listed for fixture support up to 50 lb. Hanger bar adjusts from 11-1/2" to 18-1/2". UL Listed. Covers circuit breaker knock outs that have been removed in error.  Two 1" and two 1/2" plates. Formulated to provide dependable, long-lasting power. Use in toys, audio devices, flashlights, electronic devices, remote control communication devices, smoke detectors and security systems. Plastic label jacket. Up to 80 percent capacity remaining after 7 years of storage. 1.5 volt, 25 mA continuous drain at rated capacity. Operating temperature 0 to 130 degrees F. Carded.
Energizer L91BP-2 Non-Rechargeable Cylindrical Lithium Battery Energizer L92 Cylindrical Electronic Ultimate Lithium Battery Duracell DL1/3NBBPK Lithium Battery
Shelf life of 15 years at 21 degrees C (90 percent of rated capacity). UL Listed: MH29980. Typical capacity: 3000 mAh (to 1.0 volt). Carded. Shelf life of 15 years at 21 degrees C (90 percent of rated capacity). UL Listed: MH29980. Typical capacity: 3000 mAh (to 1.0 volt). Carded. Lasts longer than alkaline in electronic devices.
LUG KIT NO6-2/0 NEUTRAL/GROUND Raco Romex 176 Electrical Box Carlon Adjust-A-Box MB120ADJ Adjustable Switch Box
For use with wire range 6-2/0. Can be mounted on any neutral or ground position by simply removing the termination screw. UL Listed. 2.875" height x .75" width x  6.875" depth, .07 lb. With non-metallic sheathed cable clamps. Two 1/2" conduit knockouts and four cable knockouts, (sides). One 1/2" conduit knockout, (bottom). Can be used in the installation of ceiling or wall lighting fixtures or as a junction box. Not designed for ceiling fan support. 50 pound maximum recommended static load. J side-mount bracket with spurs and holes for toe-nailing, for wood studs or joists. UPC bar code. UL Listed. Bracket clips on any stud. Securing the bracket to the stud ensures that the box will not move. The box snaps into place on the bracket, square and secure every time. Then turning the screw clockwise or counterclockwise adjusts the box in or out to make it flush with any wall covering. Easily removable to allow inner wall access, or to switch between single gang and double gang boxes. Accommodates high and low voltage applications. Pre-installed ground lug. Flat bottom cable priouts. UL Listed.
Thomas & Betts E981DFN-CTN Rigid Type FSC FS Switch Box Thomas & Betts E980EFN-CTN Rigid Type FSC FS Switch Box Thomas & Betts E980DFN-CTN Rigid Type FSC FS Switch Box
Safe, non-conductive, takes standard covers and accessories. For through terminations. With detachable mounting feet. 19 cubic inch capacity. Safe, non-conductive. For dead-end terminations. With integral mounting feet. Will not rust or corrode. 18 cubic inch capacity. UL Listed. Safe, non-conductive. For dead-end terminations. With integral mounting feet. Will not rust or corrode. 18 cubic inch capacity. UL Listed.
Thomas & Betts B234ADJ Wall Box Square D QO70AN Auxiliary Neutral Lug Kit Schneider PK3GTA-1CP Ground Bar Kit
Patented design provides simple, goof-proof installation and allows the installer to adjust the box to any thickness with the turn of a screw. Clip the included bracket onto any stud, mounts square and secure every time. Securing the bracket to the stud ensures that the box will not move. Comes preset at 1/2". 3" depth x 5-5/8" x 3-5/8". Satisfies NEC 370-20. UL Listed 5Z74 and classified 2 Hr W/C. Made for QO load centers. Field installed for number 12 - 2 Al or number 14 - 4 Cu wire. QO accessories can only be used with QO load centers. Used in load centers, CSED devices and NQOD and NF panel boards. Each terminal accepts (1) #14 - #4 copper wire or (1) #12 - #4 aluminum wire, (2) #14 - #12 copper wire or (2) #12 - #10 aluminum wire. NOTE - Consult local code for correct application of ground bar kit for service entrance equipment. ANSI Certified and UL Listed.
Thomas & Betts E981EFN-CTN Rigid Type FSC FS Switch Box Thomas & Betts B720R-SHK Ceiling Fan Box Thomas & Betts BH464A Rigid Outlet Box
Safe, non-conductive, takes standard covers and accessories. For through terminations. With detachable mounting feet. 19 cubic inch capacity. Non-conductive high impact lightweight PVC. Full 20 cubic inch capacity. 6 integral clamps. 4" diameter x 2-1/4" depth. Used for new work or renovations. Rated for fans up to 35 pounds and fixture up to 50 pounds. Mounts fan to a cross member secured between ceiling joist. Mounting screws included. UL Listed. Rigid wall box. Lightweight design and durable plastic. Safe to install and will never rust or corrode. Allows for large wiring devices (GFIs and dimmers). Includes hardware for easy installation.
Energizer E90 Specialty Alkaline Battery Allied Moulded 9312-EWK Old Work Outlet Box Energizer 1209 Super Lantern Battery
Plastic label jacket. 1.5 volt, 25 mA continuous drain at rated capacity. Operating temperature 0 to 130 degrees F. 1,000 mAH. Carded. Thermoset-fiberglass, with ears, wing brackets and speed clamps. Lightweight, non-corrosive, non-conductive, no ground required, will not melt or distort in high heat. Shatter resistant in cold temperatures. 2-3/4" depth x 4-1/8" x 3-1/4". 2 hour wall fire rating. UL Listed. Carbon-Zinc battery. Plastic jacket. Coil spring terminal. 6 volt, 25 mA continuous drain at rated capacity. Operating temperature 0 degrees F to 130 degrees F. Lower unit weight than alkaline. 11 AH to 0.8 volt.
Square D QOFPCP Filler Plate Carlon Super Blue BH525HP Ceiling Box Allied Moulded 3300-NK Outlet Box
Fills opening in covers if twistout is removed in error. QOFPCP are used only in QO load centers, filling the spaces where no circuit is attached. CHOMFPCP are for use only in Homeline load centers. UL Listed and ANSI Certified. Ceiling box with hanger bar, adjusts from 11-1/2" to 18-1/2". Lightweight, noncorrosive, and nonconductive, rigid, nonmetallic wiring box combines features of hard shell thermoset box and thermoplastic PVC style box. Molded of specially formulated, strong thermoplastic material, will not crack or break, even in extreme environments. Resists flexing and holds shape even under the worst conditions. Listed for fixture support up to 50 lb. 4" diameter x 3" depth. UL Listed. Ground lug included. Thermoset-fiberglass with angled mid-nails, speed clamps. Lightweight, non-corrosive, non-conductive, no ground required, will not melt or distort in high heat. Shatter resistant in cold temperatures. 2 hour wall fire rating. 3" depth x 5-11/16" x 3-3/4". UL Listed.
Carlon E982DFN-CTN Type FS Rigid Switch Box Energizer E96 Non-Rechargeable E2 Alkaline Battery Zero-Mercury A544BPZ Miniature Alkaline Battery
For multiple dead-end circuit terminations or where additional support is required in stub-up applications. Takes standard covers and accessories or devices. 18 cubic inch capacity. Plastic label jacket. Delivers longer-lasting, more powerful performance for demanding, high-tech devices such as MP3 players, portable CD players, digital cameras, hand-held electronic games, and other digital devices. Up to 80 percent capacity remaining after 7 years of storage. 1.5 volt, 25 mA continuous drain at rated capacity. Operating temperature 0 to 130 degrees F. 625 MAH. Carded. Size replaces 544, PX28A, 4LR44 and V4034PX. 6 volt,  150 mAh. Cell is four No. A76 batteries in series with a metal jacket. 150 mAH. Carded.
Energizer ECR1632BP Coin Cell Battery Square D PK4GTACP Ground Bar Kits Quantum 66249 Alkaline Battery
For electronics around the house, like keyless entry, electronic books and glucose monitors. Performs in extreme temperatures from -22 to 140 degrees F. Holds power for 8 years when not in use. Replacement for: BR1632, DL1632, ECR1632, KCR1632, KECR1632, KL1632, L1632. UL Listed. Used in load centers, CSED devices and NQOD and NF panel boards. Each terminal accepts (1) #14 - #4 copper wire or (1) #12 - #4 aluminum wire, (2) #14 - #12 copper wire or (2) #12 - #10 aluminum wire. NOTE - Consult local code for correct application of ground bar kit for service entrance equipment. ANSI Certified and UL Listed. Lasts longer in high-drain and frequently used devices that require high battery output like video game controllers and high-powered flashlights. Duralock technology. With power check.
Raco 8325 Ceiling Outlet Box Square D PK7GTACP Ground Bar Kits Tiger Grip 517 Gangable Switch Box
With non-metallic sheathed cable clamps. Two 1/2" conduit knockouts and four cable knockouts (sides). Used to hang light fixtures between joists or structural members. Includes 4" octagon box. Not designed for ceiling fan support. 10 pound maximum recommended support load. Furnished with 3/8"-18 NPS trade size fixture stud. Bar hanger is adjustable from 14-1/4" to 22-1/2". Box is adjustable along entire length of bar. Acceptable for use in 2-hour fire rated walls. UL Listed. UPC bar code. 1-1/2" deep - 15.5 cubic inches. Used in load centers, CSED devices and NQOD and NF panel boards. Each terminal accepts (1) #14 - #4 copper wire or (1) #12 - #4 aluminum wire, (2) #14 - #12 copper wire or (2) #12 - #10 aluminum wire. NOTE - Consult local code for correct application of ground bar kit for service entrance equipment. ANSI Certified and UL Listed. Four cable knockouts (end). One 1/2" conduit knockout (bottom). With clamps for non-metallic sheathed cable. 3" x 2" x 2-1/2" deep. 12.5 cubic inches. Adjustable plaster ears allow box to be used in old work applications. Acceptable for use in 2-hour rated fire walls. UL Listed.
Carlon E982EFN-CTN Type FSS Rigid Switch Box Energizer 2032BP-2 Coin Cell Battery Energizer 2016BP-2 Button Cell Battery
For multiple dead-end circuit terminations or where additional support is required in stub-up applications. Takes standard covers and accessories or devices. 18 cubic inch capacity. Replaces Duracell DL2032, Energizer ECR2032, Panasonic CR2032, and Rayovac CR2032. 20.0mm diameter x 3.2mm height. Lithium / Manganese Dioxide (Li/MnO2). 240 mAh (to 2.0 volts). Carded. UL Listed: MH12454. Replaces Energizer ECR2016. .08" diameter x .008" height. Lithium / Manganese Dioxide (Li/MnO2), 90 mAh (to 2.0 volts) typical capacity, 1.9 grams (0.07 oz.) typical weight. Carded. UL Listed: MH12454.
Square D HOMFPCP Filler Plate Coleman 95499 Low Voltage Halogen Lamp Coleman 11604 Low Voltage Connector
Fills opening in covers if twistout is removed in error. QOFPCP are used only in QO load centers, filling the spaces where no circuit is attached. CHOMFPCP are for use only in Homeline load centers. UL Listed and ANSI Certified. Landscape lighting T3 clear replacement bulb. For connection of  low voltage cable for landscape lights.
Saf-T-Cap 0105000 Outlet Ceiling Fan Box GROUND BAR 24 HOLE PM-GOLD PK Raco 681 Switch Box
For new construction or applications where attic is accessible. Fits all ceiling fans. Maximum load rating for ceiling fans is 70 pounds. 100 pounds for fixtures. 8-32 threads for lightweight fixtures, 10-24 threads for ceiling fans. 3 knockouts for conduit or Romex. 2 Romex clamps. 1-1/2" deep, 15.5 cubic inch capacity. Includes SAF-T-CAP and mounting screws. UL Listed. Used for additional grounding as required by local code. Compatible with most load center enclosures. Fits solid or stranded 4 - 14 copper wire and 10 - 12 aluminum wire. Includes mounting screws. UL Listed and ANSI Certified. 11" height x 3.5" width x 0.5" depth, .304 lb. Drawn construction for surface mount applications. Conduit wiring system. Nine 1/2" conduit knockouts (sides). Five 1/2" conduit knockouts (bottom). TS brackets, for wood or metal studs. Gauging tabs and recessed nailing spur. 4" square. 2-1/8" deep - 30.3 cubic inches. Acceptable for use in 2-hour rated fire walls. UL Listed.
Zero-Mercury 357BPZ-3 Non-Rechargeable Electronic Coin Cell Battery Carlon B468R Old Work Outlet Box Raco 8326 Ceiling Outlet Box
Replaces AG13, LR1154, EPX76, A76, LR44, SR44SW/W; Duracell D357/303, Goldpeak 357, Kodak L1154, Maxell SR44W, Panasonic SP357, Rayovac 357, Renata 357, Sony SR44W, Toshiba SR44W, and Varta V357. 11.6mm diameter x 5.4mm height. 150 MAH to 1.3 volt. Workbox can accommodate three and four large wiring devices. Installs easily for existing construction remodeling work. 8 clamps securely hold cable. Swing out clamps lock box securely to wall. Lightweight and durable and engraved with NEC approved conductor fill. Suitable for masonry walls. 68 cubic inch capacity, 3.41" depth x 7.57" x 2.89". With non-metallic sheathed cable clamps. Two 1/2" conduit knockouts and four cable knockouts (sides). Used to hang light fixtures between joists or structural members. Includes 4" octagon box. Not designed for ceiling fan support. 10 lb. maximum recommended support load. Furnished with 3/8"-18 NPS fixture stud. Bar hanger is adjustable from 14-1/4" to 22-1/2". Box is adjustable along entire length of bar. Acceptable for use in 2-hour fire rated walls. UL Listed. UPC bar code.
Square D HOM100AN Neutral Lug Kit Energizer 2025BP-2 Coin Cell Battery Thomas & Betts BH525L Ceiling Fan Box
Breaker box neutral lug is designed for Homeline load centers. It works with number 1 - 1/0 copper and aluminum wire. UL Listed, ANSI Certified. Replaces Duracell DL2025 and Rayovac CR2025. 20.0mm diameter x 2.5mm height. Lithium / Manganese Dioxide (Li/MnO2). 170 mAh to 2.0 volt. Carded. UL Listed: MH12454. New work ceiling fan box with nails and metal brace for stud finishing. Rated for fans up to 35 pounds and fixtures up to 50 pounds. 4.062" diameter x 3.06" depth. Lightweight, noncorrosive, and nonconductive, rigid, nonmetallic wiring box combines features of hard shell thermoset box and thermoplastic PVC style box. Molded of strong thermoplastic material, will not crack or break, even in extreme environments. Resists flexing and holds shape even under the worst conditions. Provides large wire capacity, and comes with molded-in nailing flanges. UL Listed.
Carlon E9802DR Type FSE Rigid Switch Box Raco 8240 Electrical Box Carlon E9802E-CTN Type FS Rigid Switch Box
For dead-end terminations where two devices or additional wiring capacity is required. Safe, non-conductive, will not rust or corrode. Integral mounting feet provide easy mounting. Type 2FSE. 32 cubic inch capacity. UL Listed. Four cable knockouts (sides). Two 1/2" and one eccentric TKO conduit knockout (sides). One 1/2" conduit knockout (bottom). 2-1/8" deep. 30.3 cubic inches. With clamps for non-metallic sheathed cable. TS, flush side-mount bracket for wood or metal studs. Fixture support of 6 pounds maximum. Acceptable for use in 2-hour rated fire walls. UL Listed. For dead-end terminations where two devices or additional wiring capacity is required. Integral mounting feet. 32 cubic inch capacity. Type 2FSE UL Listed.
Raco 685 Switch Box Raco 2027-FBAR Round Vapor Barrier Box Raco 2002FBAR Vapor Barrier Box
Drawn construction for surface mount applications. Six 3/4" side knockouts, three 1/2" and two 3/4" bottom knockouts. TS bracket for wood or metal studs. 1/2" bracket setback eliminating the need for a plaster ring. 4" square. Acceptable for use in 2-hour rated walls and ceilings. 2-1/8" deep - 30.3 cubic inches. UL Listed. Made from rugged polycarbonate material, yellow color, gasket seals all openings to prevent air or vapor penetration. Front-mounted ground screw, 1/2" setback, 4" round flush bracket. Self-clamping, nonmetallic sheathed cable entry tabs. Used independently of vapor barrier hats. Made from rugged polycarbonate material, yellow color, gasket seals all openings to prevent air or vapor penetration. Front-mounted ground screw, 1/2" setback, flush bracket. Self-clamping, nonmetallic sheathed cable entry tabs.
Carlon E981FFN-CTN Type FSC Rigid Switch Box Carlon Adjust-A-Box MB238ADJ Adjustable Switch Box Raco 7120 Ceiling Fan Box
Safe, non-conductive, takes standard covers and accessories. For through terminations. With detachable mounting feet. 19 cubic inch capacity. Bracket clips on any stud. Securing the bracket to the stud ensures that the box will not move. The box snaps into place on the bracket, square and secure every time. Then turning the screw clockwise or counterclockwise adjusts the box in or out to make it flush with any wall covering. Easily removable to allow inner wall access, or to switch between single gang and double gang boxes. Accommodates high and low voltage applications. Pre-installed ground lug. Flat bottom cable priouts. UL Listed. Round polycarbonate, 4" diameter, 12.5 cubic inch black non-metallic ceiling fan support saddle box, used in new work to mount a ceiling fan or heavy light fixture. Supports a 70  pound fan, or 210 pound fixture. Saddle design straddles standard joist. Hands free installation. 1/2" setback. Two 1/2" knock outs on the side. 4 cable clamps, mounting hardware, instructions, and high strength, hardened screws included. 2-hour fire rating, UL Orange Book. UL Listed.
Sliderbox SB Adjustable Switch/Receptacle Outlet Box Raco 296 Ceiling Fan Box Allied Moulded 9313-EWK Old Work Switch Box
Molded of engineering grade non-metallic thermoplastic. Adjustable, no need to remove or relocate mounting screws to re-position the box. Slots retain slider plate and guide it in a straight motion. Internal rails guide slider plate for smooth mounting adjustability in wall substrates from 1/2" to 1-3/8" thick and ceiling substrates from 1/2" to 1-5/32". Square corner design allows easy wall cut-in (Old work applications). Molded spline device holes for quick device screw installation. 42 cubic inch volume, two 1/2" knockouts. Internal steel, stud/wood screws. 3-9/16" depth x 4" width x 3-3/4" height. UL listed for 2 hour fire resistive walls. Ceiling fan box, 4" octagon, 1-1/2" deep. 3 bottom 1/2" knockouts. Used in new work and renovations. Ceiling fan rated octagon boxes can be used in the installation of heavy light fixtures or ceiling fans. Recommended support load for ceiling fan is 70 pounds, for fixtures is 150 pounds. Includes non-metallic sheathed cable connector, mounting hardware, high strength hardened screws, and instructions. Acceptable for use in 2-hour rated walls and ceilings. UL Listed. Thermoset-fiberglass with ears, wing brackets, speed clamps. Lightweight, non-corrosive, non-conductive, no ground required, will not melt or distort in high heat. Shatter resistant in cold temperatures. 2 hour wall fire rating. 2-7/8" depth x 5-15/16" x 3-1/4". UL Listed.
Schneider PK9GTACP Ground Bar Kit Square D ACPCP Closing Plate Allied Moulded 9350-BHK Ceiling Box
Used in load centers, CSED devices and NQOD and NF panel boards. Each terminal accepts (1) #14 - #4 copper wire or (1) #12 - #4 aluminum wire, (2) #14 - #12 copper wire or (2) #12 - #10 aluminum wire. NOTE - Consult local code for correct application of ground bar kit for service entrance equipment. ANSI Certified and UL Listed. Used for sealing off a hub opening when a service feed originates underground. The plate is compatible with A-type openings and can be used on outdoor devices that utilize a 4-hole mounting pattern. Use for A-size hub opening for Square D metering equipment. UL and CSA Listed. Four inch round ceiling box with universal bar hanger, adjustable bar assembly from 16" to 24". 4" diameter x 2-7/16" depth. Speed clamps, 50 lb. fixture rated. 2 hour wall and ceiling fire rated,  UL Listed.
Powerzone LR03-16P Alkaline Battery Siemens EC2GB152 Ground Bar Kit With Terminal 2/0 Lug Cutler-Hammer GBK10P Ground Bar Kits
Mercury and cadmium free. For equipment grounding provision. #14 to 4 AWG, 60/75 degree Celsius, Cu/A1. Bar wire holes are suitable for (1) #14-4 or up to (3) #14-10 aluminum or copper wire. Multiple wires in a single hole must be of the same size and material. Distance between mounting holes is 1-3/4". NOTE: Consult local code for correct application of ground bar kit for service entrance equipment. Kit contains one ground bar and two #10-32 x 5/8" self-threading screws. UL Listed.
Raco 294 Ceiling Fan Box Square D PK12GTACP Ground Bar Kits Sliderbox SB Adjustable Switch/Receptacle Outlet Box
Ceiling fan box, 4" octagon, 1 bottom 1/2" TKO knockout. 2-1/8" depth, 22.3 cubic inches. Used in new work and renovations. Features FA bracket for wood studs or joists, which allows box to be securely mounted flush. Ceiling fan rated, can be used in the installation of heavy light fixtures or ceiling fans. Recommended support load for ceiling fan is 70 pounds, for fixtures is 150 pounds. Includes non-metallic sheathed cable connector, mounting hardware, high strength hardened screws, and instructions. Acceptable for use in 2-hour rated walls and ceilings. UL Listed. Used in load centers, CSED devices and NQOD and NF panel boards. Each terminal accepts (1) #14 - #4 copper wire or (1) #12 - #4 aluminum wire, (2) #14 - #12 copper wire or (2) #12 - #10 aluminum wire. NOTE - Consult local code for correct application of ground bar kit for service entrance equipment. ANSI Certified and UL Listed. Molded of engineering grade non-metallic thermoplastic. Adjustable, no need to remove or relocate mounting screws to re-position the box. Slots retain slider plate and guide it in a straight motion. Internal rails guide slider plate for smooth mounting adjustability. 4" diameter x 2-3/4" width, 25 cubic inch volume, two 1/2" knockouts. Internal steel, stud/wood screws. Fixture rating 50 pounds. UL Listed for 2 hour fire resistive walls and ceilings.
Energizer EL123AP Lithium Battery Moonrays 97125 Rechargeable Replacement Solar Battery Coppertop MN2400B8Z High Capacity Alkaline Battery
Operating temperature -40 to 140 degrees F. Contains a Positive Temperature Coefficient (PTC) safety device to limit current during short circuit conditions. Replaces DL123A. Typical capacity: 1500 mAh (to 2.0 volt). NiCd 4 pack, batteries for solar lights. High energy density, capable of performance at high discharge rates. Typical temperature range: -4 to 130 degrees F. Up to 85 percent capacity remaining after 4 years of storage at 70 degrees F.
Energizer EL1CR2 E2 Lithium Battery Y-ADAPTER ACCESSORY           Siemens EC38595 Closure Plate
Y-ADAPTER ACCESSORY
Our Price: $7.92
Temperature range from -40 to 140 degrees F. Contains a Positive Temperature Coefficient (PTC) safety device to limit current during short circuit conditions. 800 mAH to 2.0 volt. Y-Adaptor accessory allows 2 low voltage heads to be connected at 1 quick connect location. Fits any meter socket application where a closure plate is needed.
Square D PK15GTACP Ground Bar Kits Moonrays 97126 Rechargeable Replacement Solar Battery Duracell PX28LBPK Lithium Battery
Used in load centers, CSED devices and NQOD and NF panel boards. Each terminal accepts (1) #14 - #4 copper wire or (1) #12 - #4 aluminum wire, (2) #14 - #12 copper wire or (2) #12 - #10 aluminum wire. NOTE - Consult local code for correct application of ground bar kit for service entrance equipment. ANSI Certified and UL Listed. NiCd 4 pack, batteries for solar lights. Lasts longer than alkaline in electronic devices.
Raco 926 Ceiling Fan Box Ultra DLCR2BPK Lithium Battery Cutler-Hammer GBK14P Ground Bar Kits
Ceiling fan box with brace, 1-1/2" deep, 15.8 cubic inch box, for new work, to hang ceiling fans and light fixtures between joists or structural members safely and securely. Drawn construction. Maximum 70 pound fan or 90 pound fixture. Brace is adjustable form 16" to 24". Includes 2 end 1/2" knock outs. Acceptable for use in 2-hour fire rated walls and ceilings. UL Listed. Lasts longer than alkaline in electronic devices. Light in weight and compact, high energy density, excellent shelf life, long-term reliability, and high rate capability over a broad temperature range. Bar wire holes are suitable for (1) #14-4 or up to (3) #14-10 aluminum or copper wire. Multiple wires in a single hole must be of the same size and material. Distance between mounting holes is 1-3/4". NOTE: Consult local code for correct application of ground bar kit for service entrance equipment. Kit contains one ground bar and two #10-32 x 5/8" self-threading screws. UL Listed.
Energizer E92MP-8 Non-Rechargeable Alkaline Battery Eveready Gold A92 Alkaline Battery Philips Comp-Covered LC1420CI Magnetic Ballast
Formulated to provide dependable, long-lasting power. Use in toys, audio devices, flashlights, electronic devices, remote control communication devices, smoke detectors and security systems. Plastic label jacket. Up to 80 percent capacity remaining after 7 years of storage. 1.5 volt, 25 mA continuous drain at rated capacity. Operating temperature 0 to 130 degrees F. Carded. Plastic label jacket. Up to 80 percent capacity remaining after 7 years of storage. 1.5 volt, 25 mA continuous drain at rated capacity. Operating temperature 0 to 130 degrees F. Carded. For use with one F14T8, F15T8, F18T8, F19T8, F14T12, F15T12, or F20T12 bulb. Minimum start temperature 50 degrees. 120 volt. UL and CSA listed.
Schneider PK18GTACP Ground Bar Kit EXTENSION CORD ACCESSORY 10FT Siemens Energy ECGB10 Ground Bar Kits
Used in load centers, CSED devices and NQOD and NF panel boards. Each terminal accepts (1) #14 - #4 copper wire or (1) #12 - #4 aluminum wire, (2) #14 - #12 copper wire or (2) #12 - #10 aluminum wire. NOTE - Consult local code for correct application of ground bar kit for service entrance equipment. ANSI Certified and UL Listed. Extension cord accessory for system lead. 10 Ft. Increases the gap between the transformer and the low voltage heads. For equipment grounding provision. #14 to 4 AWG, 60/75 degree Celsius, Cu/A1.
BATTERIES RCHARGBL AA NIMH 4PK Energizer L92 Cylindrical Ultimate Lithium Battery Square D PK23GTACP Ground Bar Kits
Rechargeable batteries, 800 Mah AA battery, NI-Mh, 1.2 volt. Shelf life of 15 years at 21 degrees C (90 percent of rated capacity). UL Listed: MH29980. Typical capacity: 3000 mAh (to 1.0 volt). Carded. Used in load centers, CSED devices and NQOD and NF panel boards. Each terminal accepts (1) #14 - #4 copper wire or (1) #12 - #4 aluminum wire, (2) #14 - #12 copper wire or (2) #12 - #10 aluminum wire. NOTE - Consult local code for correct application of ground bar kit for service entrance equipment. ANSI Certified and UL Listed.
Siemens EC3GB302 Ground Bar Kit With Terminal 2/0 Lug Powerzone LR03-24P Alkaline Battery Quantum 66253 Alkaline Battery
For equipment grounding provision. #14 to 4 AWG, 60/75 degree Celsius, Cu/A1. Mercury and cadmium free. Lasts longer in high-drain and frequently used devices that require high battery output like video game controllers and high-powered flashlights. Duralock technology. With power check.
Coppertop MN24RT12Z Reclosable Alkaline Battery Duracell MN908 Non-Rechargeable Lantern Alkaline Battery Ultra DL123AB2PK Lithium Battery
High energy density, capable of performance at high discharge rates. Typical temperature range: -4 to 130 degrees F. Up to 85 percent capacity remaining after 4 years of storage at 70 degrees F. Provides power and long life. Designed for photo use, such as in digital cameras. Light in weight and compact, high energy density, excellent shelf life, long-term reliability, and high rate capability over a broad temperature range.
Raco 686 Switch Box Cutler Hammer GBK21P Ground Bar Kit Energizer 529 Lantern Battery
Welded construction. Conduit wiring system. Two 1/2" and two 3/4" knockouts (sides). Three 1/2" and three 3/4" knockouts (bottom). Six 1/2" and six 3/4" knockouts (end). FM type bracket for wood or metal studs. 2-1/2" deep - 47.8 cubic inches. UL Listed. Bar wire holes are suitable for (1) #14-4 or up to (3) #14-10 aluminum or copper wire. Multiple wires in a single hole must be of the same size and material. Distance between mounting holes is 1-3/4". NOTE: Consult local code for correct application of ground bar kit for service entrance equipment. Kit contains one ground bar and two #10-32 x 5/8" self-threading screws. UL Listed. Metal jacket, operating temperature of 0 to 130 degrees F. 26,000 mAH to 0.8 volt.
Energizer EL123AP Cylindrical Lithium Battery Energizer EN92 Non-Rechargeable Industrial Alkaline Battery Energizer EL223 Lithium Battery
Operating temperature -40 to 140 degrees F. Contains a Positive Temperature Coefficient (PTC) safety device to limit current during short circuit conditions. Replaces DL123A. Typical capacity: 1500 mAh (to 2.0 volt). Plastic label jacket. Up to 80 percent capacity remaining after 7 years of storage. 1.5 volt, 25 mA continuous drain at rated capacity. Operating temperature 0 to 130 degrees F. Not intended for retail sale. Carded. Size replaces DL233A and BR-P2. Operating temperature -40 to 140 degrees F. Contains a Positive Temperature Coefficient (PTC) safety device to limit current during short circuit conditions. Typical capacity: 1500 mAh (to 4.0 volt).
Energizer EL2CR5 Lithium Battery