Home > ELECTRICAL > SPECIALTY ELECTRICAL > FLASHLIGHTS > HEADLIGHTS
Sort By:
1
Eveready 1250 Non-Rechargeable Electronic Battery Eveready 1235 Non-Rechargeable Super Battery Eveready 1222 Non-Rechargeable Super Battery
Carbon-Zinc. Metal jacket, 1.5 volt, 25 mA continuous drain at rated capacity. Operating temperature 0 to 130 degrees F. Carbon-Zinc. Metal jacket, 1.5 volt, 25 mA continuous drain at rated capacity. Operating temperature 0 to 130 degrees F. Carbon Zinc, metal jacket, 25 mA continuous drain at rated capacity. Operating temperature 20 to 130 degrees F. Carded.
Cooper BP45FS2 All Purpose Fluorescent Starter Cooper BP45-FS4 All Purpose Fluorescent Starter Cutler Hammer BRFPP Filler Plate
All purpose, two terminal, standard. Accurately timed to combine starts with long bulb life. For use where lights are turned on more than five times daily. Also, in devices where bulb life expectancy is two years or less. No.BP45FS2: is used for 18" long 15 watt bulbs or 24" long 20 watt bulbs. No.BP45-FS4 is used for 36" long 30 watt bulbs and 48" long 40 watt bulbs. All purpose, two terminal, standard. Accurately timed to combine starts with long bulb life. For use where lights are turned on more than five times daily. Also, in devices where bulb life expectancy is two years or less. No.BP45FS2: is used for 18" long 15 watt bulbs or 24" long 20 watt bulbs. No.BP45-FS4 is used for 36" long 30 watt bulbs and 48" long 40 watt bulbs. Plastic (snap-in) for type BR 1" space. May also be used with 400 amp and 600 amp load centers.
Cooper 410W Feed-Through Cord Switch Cooper 410B Feed-Through Cord Switch Cooper 410 Feed-Through General Duty Cord Switch
In-line ON/OFF switch. Insulation displacement terminals eliminate need for stripping insulation from cord conductors. Meets all UL 20 requirements. 6 amp/125 volt AC; 3 amp/250 volt AC; 3 amp/125  volt AC "T". For #18 SPT-1. In-line ON/OFF switch. Insulation displacement terminals eliminate need for stripping insulation from cord conductors. Meets all UL 20 requirements. 6 amp/125 volt AC; 3 amp/250 volt AC; 3 amp/125  volt AC "T". For #18 SPT-1. In-line ON/OFF switch. Insulation displacement terminals eliminate need for stripping insulation from cord conductors. Meets all UL 20 requirements. 6 amp/125 volt AC; 3 amp/250 volt AC; 3 amp/125  volt AC "T". For #18 SPT-1.
GROUND BAR 7 HOLE CONSUMER PK Cooper 735B-BOX Toggle Switch Jandorf 88920 In-Line Switch
For grounding copper or aluminum terminals in a GE load center. Offers 4 small holes for 14 - 8 AWG copper or 12 - 8 AWG aluminum terminals and 3 large holes for 14 - 4 AWG copper or 12 - 4 AWG aluminum terminals. UL Listed and ANSI Certified. 6.875" height x 2.875" width x 0.5" depth, .105 lb. Surface mount, side wire, feed-through heavy duty plastic construction switch for SPT cord, 10 Amp-125 Volt,  5 Amp-250 Volt. ON/OFF switch. CSA Listed.
Jandorf 60180 In-Line Switch Energizer E93 Alkaline Battery Energizer E95 Alkaline Battery
ON/OFF switch. CSA Listed. Tester on every battery. Plastic label jacket. Up to 80 percent capacity remaining after 7 years of storage. 1.5 volt, 25 mA continuous drain at rated capacity. Operating temperature 0 to 130 degrees F. Carded. Tester on every battery. Plastic label jacket. Up to 80 percent capacity remaining after 7 years of storage. 1.5 volt, 25 mA continuous drain at rated capacity. Operating temperature 0 to 130 degrees F. Carded.
GE THFILLER Rectangle Filler Plate Coppertop MN1300B2Z Non-Rechargeable Alkaline Battery Coppertop MN1400B2Z High Capacity Alkaline Battery
Covers circuit breaker knock outs that have been removed in error.  Two 1" and two 1/2" plates. Lasts longer in high-tech devices. High energy density, capable of performance at high discharge rates. Lasts longer in high-tech devices. High energy density, capable of performance at high discharge rates.
Coppertop MN1604B1Z Alkaline Battery Eveready Gold A522 Alkaline Battery Eveready Gold A93BP-2 Alkaline Battery
High energy density, capable of performance at high discharge rates. Rated capacity at 25 mA continuous drain. 0 to 130 degrees F operating temperature. Up to 80 percent capacity remaining after 5 years of storage. 565 MAH. Long lasting. 1.5 volt, 25 mA continuous drain at rated capacity. Operating temperature 0 to 130 degrees F. Carded.
LUG KIT NO6-2/0 NEUTRAL/GROUND Cooper 933V Feed-Through Carded Cord Switch Cooper 933B Feed-Through Carded Cord Switch
For use with wire range 6-2/0. Can be mounted on any neutral or ground position by simply removing the termination screw. UL Listed. 2.875" height x .75" width x  6.875" depth, .07 lb. Feed-through In-line on/off cord switch, single pole, screw terminals. 3 Amp, 120 volt AC. For flat or round cords, 18/2 spt-1, spt-2, hpn, 16/2 spt-1, spt-2, hpn, round cords, type svt, maximum diameter 9/32". Temperature rating of -40 to 65 degrees C. UL Listed, Meets all CSA requirements. Feed-through In-line on/off cord switch, single pole, screw terminals. 3 Amp, 120 volt AC. For flat or round cords, 18/2 spt-1, spt-2, hpn, 16/2 spt-1, spt-2, hpn, round cords, type svt, maximum diameter 9/32". Temperature rating of -40 to 65 degrees C. UL Listed, Meets all CSA requirements.
Energizer 522 Alkaline Battery Square D QO70AN Auxiliary Neutral Lug Kit Schneider PK3GTA-1CP Ground Bar Kit
Metal jacket. Up to 80 percent capacity remaining after 5 years of storage. 9 volt, 25 mA continuous drain at rated capacity. Operating temperature 0 to 130 degrees F. 625 MAH. Carded. Made for QO load centers. Field installed for number 12 - 2 Al or number 14 - 4 Cu wire. QO accessories can only be used with QO load centers. Used in load centers, CSED devices and NQOD and NF panel boards. Each terminal accepts (1) #14 - #4 copper wire or (1) #12 - #4 aluminum wire, (2) #14 - #12 copper wire or (2) #12 - #10 aluminum wire. NOTE - Consult local code for correct application of ground bar kit for service entrance equipment. ANSI Certified and UL Listed.
Cooper 933 Feed-Through Cord Switch HEADLIGHT 10 LED WHT/RED 3AAA Eveready Gold A95BP-2 Alkaline Battery
Feed-through In-line on/off cord switch, single pole, screw terminals. 3 Amp, 120 volt AC. For flat or round cords, 18/2 spt-1, spt-2, hpn, 16/2 spt-1, spt-2, hpn, round cords, type svt, maximum diameter 9/32". Temperature rating of -40 to 65 degrees C. UL Listed, Meets all CSA requirements. LED headlight, 17 lumens, 13 hour run time, 15 meter beam distance, 8 LED white, 2 red blinking LED. Push button switch. Uses 3 AAA batteries, included. 2.3" L x 2.7" W, .28lb. Long lasting. 1.5 volt, 25 mA continuous drain at rated capacity. Operating temperature 0 to 130 degrees F. Carded.
Square D QOFPCP Filler Plate Coast 20186 Flashlight Filter Kit Square D PK4GTACP Ground Bar Kits
Fills opening in covers if twistout is removed in error. QOFPCP are used only in QO load centers, filling the spaces where no circuit is attached. CHOMFPCP are for use only in Homeline load centers. UL Listed and ANSI Certified. Includes 4 colored filters, red, green, blue and yellow, plus clear. Rubber bezel cover holds filter in place. Fits HP7R, HP7, HP7TAC, PX46, PX45, TX44, TX40, G40, G35 and HL8 flashlights. Used in load centers, CSED devices and NQOD and NF panel boards. Each terminal accepts (1) #14 - #4 copper wire or (1) #12 - #4 aluminum wire, (2) #14 - #12 copper wire or (2) #12 - #10 aluminum wire. NOTE - Consult local code for correct application of ground bar kit for service entrance equipment. ANSI Certified and UL Listed.
Square D PK7GTACP Ground Bar Kits Cooper Wiring 735V-BOX Toggle Switch Square D HOMFPCP Filler Plate
Used in load centers, CSED devices and NQOD and NF panel boards. Each terminal accepts (1) #14 - #4 copper wire or (1) #12 - #4 aluminum wire, (2) #14 - #12 copper wire or (2) #12 - #10 aluminum wire. NOTE - Consult local code for correct application of ground bar kit for service entrance equipment. ANSI Certified and UL Listed. Cooper Wiring Toggle Switch, 125/250 V, 10 A, 1 Poles, Side Wired Terminal, Wall Mounting, 2.03 in Overall Length, 1.39 in Overall Width, Plastic, Ivory, UL Listed, CSA Certified, For Commercial/Industrial and Residential Applications Fills opening in covers if twistout is removed in error. QOFPCP are used only in QO load centers, filling the spaces where no circuit is attached. CHOMFPCP are for use only in Homeline load centers. UL Listed and ANSI Certified.
GROUND BAR 24 HOLE PM-GOLD PK Cooper 933 Feed-Through Cord Switch CORD SWITCH HVDY BROWN 250V
Used for additional grounding as required by local code. Compatible with most load center enclosures. Fits solid or stranded 4 - 14 copper wire and 10 - 12 aluminum wire. Includes mounting screws. UL Listed and ANSI Certified. 11" height x 3.5" width x 0.5" depth, .304 lb. Feed-through In-line on/off cord switch, single pole, screw terminals. 3 Amp, 120 volt AC. For flat or round cords, 18/2 spt-1, spt-2, hpn, 16/2 spt-1, spt-2, hpn, round cords, type svt, maximum diameter 9/32". Temperature rating of -40 to 65 degrees C. UL Listed, Meets all CSA requirements. Insulation displacement (2). Rating: 3A/125 VT, 3A/250 VAC, 6A/125 VAC.
Square D HOM100AN Neutral Lug Kit TAP CUBE 1-OUTLET W/ON-OFF SW Dorcy 412099 3 LED Headlight
Breaker box neutral lug is designed for Homeline load centers. It works with number 1 - 1/0 copper and aluminum wire. UL Listed, ANSI Certified. Energy saver power tap kills all residual energy. Illuminated on/off switch indicates when power is on. Green indicator light. Size: 2.5" D X 4.6" W X 4.6" H. Adjustable light head and elastic head strap for hands-free use. Top mounted On/Off slide switch. Panel swivels 50 degrees. Three 5MM LEDs give 70 hours run time and 28 lumens for a 15 meter beam with included 3 AAA batteries.
Schneider PK9GTACP Ground Bar Kit Square D ACPCP Closing Plate Siemens EC2GB152 Ground Bar Kit With Terminal 2/0 Lug
Used in load centers, CSED devices and NQOD and NF panel boards. Each terminal accepts (1) #14 - #4 copper wire or (1) #12 - #4 aluminum wire, (2) #14 - #12 copper wire or (2) #12 - #10 aluminum wire. NOTE - Consult local code for correct application of ground bar kit for service entrance equipment. ANSI Certified and UL Listed. Used for sealing off a hub opening when a service feed originates underground. The plate is compatible with A-type openings and can be used on outdoor devices that utilize a 4-hole mounting pattern. Use for A-size hub opening for Square D metering equipment. UL and CSA Listed. For equipment grounding provision. #14 to 4 AWG, 60/75 degree Celsius, Cu/A1.
Cooper BP4404V Polarized Plug-In Switch Cooper BP4404W Polarized Plug-In Switch Cutler-Hammer GBK10P Ground Bar Kits
Polarized indoor plug-in switch for lamps, appliances, Christmas lights and other hard to reach applications. 120 volt AC, 15 amp, 1800 watts maximum. On-off - carded. UL Listed. Polarized indoor plug-in switch for lamps, appliances, Christmas lights and other hard to reach applications. 120 volt AC, 15 amp, 1800 watts maximum. On-off - carded. UL Listed. Bar wire holes are suitable for (1) #14-4 or up to (3) #14-10 aluminum or copper wire. Multiple wires in a single hole must be of the same size and material. Distance between mounting holes is 1-3/4". NOTE: Consult local code for correct application of ground bar kit for service entrance equipment. Kit contains one ground bar and two #10-32 x 5/8" self-threading screws. UL Listed.
Square D PK12GTACP Ground Bar Kits Siemens EC38595 Closure Plate Energizer E95BP-4 Non-Rechargeable Alkaline Battery
Used in load centers, CSED devices and NQOD and NF panel boards. Each terminal accepts (1) #14 - #4 copper wire or (1) #12 - #4 aluminum wire, (2) #14 - #12 copper wire or (2) #12 - #10 aluminum wire. NOTE - Consult local code for correct application of ground bar kit for service entrance equipment. ANSI Certified and UL Listed. Fits any meter socket application where a closure plate is needed. Tester on every battery. Plastic label jacket. Up to 80 percent capacity remaining after 7 years of storage. 1.5 volt, 25 mA continuous drain at rated capacity. Operating temperature 0 to 130 degrees F. Carded.
Energizer E93BP-4 Alkaline Battery Square D PK15GTACP Ground Bar Kits Cutler-Hammer GBK14P Ground Bar Kits
Tester on every battery. Plastic label jacket. Up to 80 percent capacity remaining after 7 years of storage. 1.5 volt, 25 mA continuous drain at rated capacity. Operating temperature 0 to 130 degrees F. Carded. Used in load centers, CSED devices and NQOD and NF panel boards. Each terminal accepts (1) #14 - #4 copper wire or (1) #12 - #4 aluminum wire, (2) #14 - #12 copper wire or (2) #12 - #10 aluminum wire. NOTE - Consult local code for correct application of ground bar kit for service entrance equipment. ANSI Certified and UL Listed. Bar wire holes are suitable for (1) #14-4 or up to (3) #14-10 aluminum or copper wire. Multiple wires in a single hole must be of the same size and material. Distance between mounting holes is 1-3/4". NOTE: Consult local code for correct application of ground bar kit for service entrance equipment. Kit contains one ground bar and two #10-32 x 5/8" self-threading screws. UL Listed.
Coppertop MN1300R4Z Alkaline Battery Coppertop MN1400R4ZX Alkaline Battery Coppertop MN1604B2Z Alkaline Battery
Lasts longer in high-tech devices. High energy density, capable of performance at high discharge rates. Lasts longer in high-tech devices. High energy density, capable of performance at high discharge rates. High energy density, capable of performance at high discharge rates.
Eveready Gold A522BP Alkaline Battery Schneider PK18GTACP Ground Bar Kit Eveready Gold A93BP-4 Alkaline Battery
Rated capacity at 25 mA continuous drain. 0 to 130 degrees F operating temperature. Up to 80 percent capacity remaining after 5 years of storage. 565 MAH. Used in load centers, CSED devices and NQOD and NF panel boards. Each terminal accepts (1) #14 - #4 copper wire or (1) #12 - #4 aluminum wire, (2) #14 - #12 copper wire or (2) #12 - #10 aluminum wire. NOTE - Consult local code for correct application of ground bar kit for service entrance equipment. ANSI Certified and UL Listed. Long lasting. 1.5 volt, 25 mA continuous drain at rated capacity. Operating temperature 0 to 130 degrees F. Carded.
Siemens Energy ECGB10 Ground Bar Kits Energizer 522BP-2 Alkaline Battery Square D PK23GTACP Ground Bar Kits
For equipment grounding provision. #14 to 4 AWG, 60/75 degree Celsius, Cu/A1. Metal jacket. Up to 80 percent capacity remaining after 5 years of storage. 9 volt, 25 mA continuous drain at rated capacity. Operating temperature 0 to 130 degrees F. 625 MAH. Carded. Used in load centers, CSED devices and NQOD and NF panel boards. Each terminal accepts (1) #14 - #4 copper wire or (1) #12 - #4 aluminum wire, (2) #14 - #12 copper wire or (2) #12 - #10 aluminum wire. NOTE - Consult local code for correct application of ground bar kit for service entrance equipment. ANSI Certified and UL Listed.
Jandorf 61210 In-Line Switch Dorcy 41-2105 3 LED Cap Light Headlight Siemens EC3GB302 Ground Bar Kit With Terminal 2/0 Lug
ON/OFF switch. CSA Listed. Lightweight construction, 13.5 lumens, 13 hour run time. 3 super bright white 5MM LEDs. Clip attachment to wear on the brim of a hat for hands-free use. Bottom mounted slide switch. 2.68" length x 1.89" width x 1.04" height. White LED. One CR2016, 3 volt, 75mAh, 1.6mm battery included. For equipment grounding provision. #14 to 4 AWG, 60/75 degree Celsius, Cu/A1.
HEADLIGHT 8 LED WHT/RED 3AAA  Energizer LA522 Advanced Lithium Battery Eveready Gold A95BP-4 Alkaline Battery
LED Headlight, 42 lumens, 12 hour run time, 20 foot beam distance, 8 LED white, 1 LED red ,1 LED green. Push button top switch. Panel swivels 50 degrees. 2 brightness modes, 8 LED high, 4 LED low. Uses 3 AAA batteries, Included. 2-3/4" L x 1-3/4" W. Red, blue colors. Longer service and lighter, especially in moderate to heavy drain applications. Higher operating voltage and flatter discharge curve with good leakage resistance. No added mercury, cadmium, or lead. Plastic label, miniature snap terminal. 10 year shelf life. 49 mm height x 26.5 mm length x 17.5 mm width. Long lasting. 1.5 volt, 25 mA continuous drain at rated capacity. Operating temperature 0 to 130 degrees F. Carded.
LIGHT CAP 2AAA 85 LUMEN       HEADLIGHT 2 LED 100LUMEN      Cutler Hammer GBK21P Ground Bar Kit
LIGHT CAP 2AAA 85 LUMEN
Our Price: $10.30
HEADLIGHT 2 LED 100LUMEN
Our Price: $11.39
Compact, lightweight cap light clips to cap above the brim. Three light modes, white high & low and red for night vision. Electronic switch works with gloved hands. Impact and water resistant. 85 lumens, 4 hours run time. Includes four AAA Energizer MAX batteries. Powerful LED headlamp beam. Up to 4X brighter than standard LED technology. Impact resistant. Slide switch. Includes adjustable elastic headband and 3 AAA Energizer MAX batteries. Bar wire holes are suitable for (1) #14-4 or up to (3) #14-10 aluminum or copper wire. Multiple wires in a single hole must be of the same size and material. Distance between mounting holes is 1-3/4". NOTE: Consult local code for correct application of ground bar kit for service entrance equipment. Kit contains one ground bar and two #10-32 x 5/8" self-threading screws. UL Listed.
Feit FS5/10 Fluorescent Starter with Condenser Feit FS2/10 Fluorescent Starter with Condenser Feit FS4/10 Fluorescent Starter with Condenser
Long life fluorescent starter with condenser. Long life fluorescent starter with condenser. Long life fluorescent starter with condenser.
Feit FS22/10 Fluorescent Starter with Condenser Energizer EN93 Non-Rechargeable Industrial Alkaline Battery Square D S106 Replacement Screw
Long life fluorescent starter with condenser. Long lasting. 1.5 volt, 25 mA continuous drain at rated capacity. Plastic label jacket. Up to 80 percent capacity remaining after 7 years of storage. 8,350 MAH to 0.8 volt. Operating temperature 0 to 130 degrees F. Not intended for retail sale. Fit many types of service entrance devices and load center covers. Use them to replace lost or damaged screws.
Coppertop MN14R8DWZ17 Double Wide Alkaline Battery Coppertop MN13R8DWZ17 Double Wide Alkaline Battery Coppertop MN16B4DW Double Wide Alkaline Battery
Lasts longer in high-tech devices. High energy density, capable of performance at high discharge rates. Lasts longer in high-tech devices. High energy density, capable of performance at high discharge rates. High energy density, capable of performance at high discharge rates.
Energizer E95BP-8H Non-Rechargeable Alkaline Battery Energizer E93BP-8H Alkaline Battery Siemens ECLK2125 Sub-Feed Lug Kit
Tester on every battery. Plastic label jacket. Up to 80 percent capacity remaining after 7 years of storage. 1.5 volt, 25 mA continuous drain at rated capacity. Operating temperature 0 to 130 degrees F. Carded. Tester on every battery. Plastic label jacket. Up to 80 percent capacity remaining after 7 years of storage. 1.5 volt, 25 mA continuous drain at rated capacity. Operating temperature 0 to 130 degrees F. Carded. Sub feed lug kit. 125 amp. 2 pole. Lugs to sub feed to another panel.
Energizer EN95 Non-Rechargeable Industrial Alkaline Battery Square D L211N Safety Switches HEADLIGHT HD 3 LED 200LUMEN
Long lasting. 1.5 volt, 25 mA continuous drain at rated capacity. Plastic label jacket. Up to 80 percent capacity remaining after 7 years of storage. 8,350 MAH to 0.8 volt. Operating temperature 0 to 130 degrees F. Not intended for retail sale. Single phase, 2 pole, 3 wire, solid neutral, 120/240 volt AC. Rated 3 HP at 240 volt AC, with metallic enclosure. Typical uses include workshop or hobby room, water heater, furnace, garage or well pump disconnect. 10,000 AIC (short circuit rating) with plug fuses. Padlock attachment for lock off. 5.00" x 7.63" x 4.00". UL Listed, meets NEMA standard KS1. Powerful LED headlamp beam. Up to 4X brighter than standard LED technology. Impact resistant. Slide switch. Includes adjustable elastic headband and 3 AAA Energizer MAX batteries.
Energizer 522BP-4H Alkaline Battery Pro-Cell PC1400 Alkaline Battery Square D L111N Fusible Light Duty Safety Switch
For use in electronic applications requiring heavy currents for long periods of time such as cd players, radios, etc. Delivers 50-100 percent more total energy than conventional Carbon Zinc batteries of the same size. Replaces E522. Long lasting power. Single phase, 1 pole, 2 wire, solid neutral, 120/240 volt AC. Rated 2 HP at 120 volt AC, with metallic enclosure. Typical loads include workshop or hobby room, water heater, furnace, garage or well pump disconnect. 10,000 AIC (short circuit rating) with plug fuses. Padlock attachment for lock off. UL Listed, meets NEMA standard KS1. 5.00" x 7.63" x 4.00".
Pro-Cell PC1300 Non-Rechargeable Alkaline Battery HEADLIGHT SPOTBEAM LED 3AAA   Coast HL5 Adjustable Head Lamp
Long lasting power. LED spot beam headlight, 134 lumen, 12 hours of run time and 3 brightness modes, full power, half power and strobe mode. 118 meters beam distance. Push button top switch. Uses 3 AAA batteries, included. Plastic. 2.75" Width x 1.5" Depth x 1.5 Height, .25lb. Broad even beam, lights up a large area, indoor or out. 175 lumen output, 3 hour 45 min runtime. 56 meter (183 ft) beam distance. Front switch. Hinged attachment to position beam. Impact and water resistant. 4.4 oz. / 125 g (including batteries). Uses 3 AAA batteries, included.
HEADLIGHT HD 3 LED 250LUMEN   Dorcy 41-2091 LED Headlight Coast HL4 Head Lamp
Powerful LED headlamp beam. Up to 4X brighter than standard LED technology. Impact resistant. Slide switch. Includes adjustable elastic headband and 3 AAA Energizer MAX batteries. Adjustable elastic head strap for hands-free use. Top mounted push button switch. 80 lumen white LED and a red LED. Gives 63 meters beam distance and 7 hours run time with included 3 AAA batteries. Five white, one red LEDs. Broad even beam, lights up a large area, indoor or out. 145 lumen output, 6 hour 57 min runtime. 57 meter (186 ft) beam distance. Front dual switch, each color controlled independently. Hinged attachment to position beam. Impact and water resistant. 4.4 oz. / 125 g (including batteries). Uses 3 AAA batteries, included.
Zero-Mercury EN22 Non-Rechargeable Industrial Alkaline Battery Cutler-Hammer DP221NGB Safety Switches Dorcy 41-2098 LED Headlight
Metal jacket. Up to 80 percent capacity remaining after 5 years of storage. 1.5 volt, 25 mA continuous drain at rated capacity. Operating temperature 0 to 130 degrees F. 625 MAH to 0.8 volt. Steel enclosure. 2 pole, 3 wire, general duty safety switch, plug fuse type, (Type S, T, OR W) fusible with neutral NEMA 1. 120/240 volt rating. 1/2 HP at 120 volt, 1-1/2 HP at 240 volt. Does not have an interlock to prevent opening when switch is in the on position. UL Listed. Aluminum construction, adjustable elastic head strap. Reflector focuses the beam to project over 100 meters. Push button switch on the side, ratcheting device for angle adjustment. Full power and half power settings. 115 lumens, 2 hour run-time with included 3 AAA batteries.
Powerzone LR20-2P-DB Alkaline Battery Square D D211NCP Safety Switches Square D L221N Safety Switches
Mercury and cadmium free. Single phase, 2 pole, 3 wire, 2 blades and fuseholders, factory installed solid neutral, 120/240 volt AC. With metallic enclosure for indoor use. Designed to open or close an electrical circuit in general duty applications. Rated 1-1/2 HP. For residential or commercial applications. For PK3GTA-1 field installable service ground bar kit. With plug type fuse protection. Lugs suitable for aluminum or copper conductors. Spring reinforced plated copper fuse clips. ANSI Certified and UL Listed. Single phase, 2 pole, 3 wire (2 blades, fuseholders and 1 neutral), 120/240 volt AC. Rated 3 HP at 240 volt AC, with metallic enclosure. 10,000 AIC (short circuit rating) with class H cartridge fuses. NEMA type 1 enclosure. Terminal lug data: (1) #12 - 6 Al or #14 - 6 Cu. wire. Service ground bar kit PKGTA1 sold separately. Padlock attachment for lock off. UL Listed, meets NEMA standard KS1.
Coast HL7 Adjustable Head Lamp Siemens Energy LF211NU Safety Switches Powerzone LR14-2P-DB Alkaline Battery
Focusing headlamp with adjustable focus and light dimming functions. From spot to flood. Larger power switch and easier-to-grip focusing bezel. Dimming function adjusts light output to just the right level. Expandable Z-cord provides power to the LED from the battery pack and is built in to the headband to reduce the possibility of snagging. Unbreakable LED, impact and water resistant. Twist focus. 305 lumens high/4 lumens low, 1 hour 30 min. high/70 hours low run time, 119 meters high beam distance. Adjustable elastic straps. Hinged beam adjustment to position light where needed. 4.4 ounces (including batteries). Tested and rated to ANSI/FL1 standards. Uses 3 AAA batteries, included. Single phase, 2 pole, 3 wire, solid neutral, 120/240 volt. 10,000 AIC with plug fuses (not included). Metallic enclosure. Rated 1-1/2 HP standard/3 HP maximum. Compact size, quick-make, quick-break mechanism. Suitable for use as service entrance equipment. Cover interlock. Bottom cable entry and exit only, no hub provision supplied. Padlocking provision to lock cover closed or to lock in off position. Lugs suitable for copper or aluminum. Silver plated copper conductors. #14-6 AWG line, #14-8 load lug wire ranges. 5-1/2" x 8-1/4" x 5-13/16". UL Listed file No.E4776, NEMA type GD, meets federal specifications WS865C. Mercury and cadmium free.
Pro-Cell PC1604BKD Non-Rechargeable Alkaline Battery Powerzone 6LR61-1P-DB Alkaline Battery Cutler-Hammer DG221NGB Safety Switches
Long lasting power. Mercury and cadmium free. Steel enclosure. 2 pole, 3 wire, 2 blades, 2 class H cartridge fuses (not included), solid neutral, 120/240 volt AC. Rated 1-1/2 to 3 HP single phase, 3 to 7-1/2 HP 3-phase at 240 volt only when dual element fuses are used. For residential and commercial applications. Suitable for light duty motor circuits and service entrance. For use on systems capable of delivering up to 10,000 RMS, symmetrical fault current. Bolt on hub provided. DS100GK ground kit sold separately. 6-1/6" x 7-1/2" x 6-3/4". UL Listed file No.E5239; meets UL98 for enclosed switches and NEMA standard KS1.
LIGHT WRAP NARROW 2FT         FIXTURE CIRC FLUSH 22/32W WHT HEADLIGHT LED CREE 180 LUMEN
LIGHT WRAP NARROW 2FT
Our Price: $38.19
Linear flush mount. For surface-mount ceiling applications. Metal housing with decorative plastic end caps. White acrylic diffuser. 50,000 hours, 4,000K. UL certified to US and Canadian standards. Listed for damp locations. ENERGY STAR certified. Retro design with exposed circline lamp. Bare lamp provides maximum light output and easy access for cleaning and maintenance. Uses circline T9 lamp for energy efficiency, color rendering and long life (not included). Standard with electronic ballast, 120 volt. No flickering and quiet operation without interfering with other home electronics. For use with non-dimmable switches only. CUL listed to US and Canadian safety standards and suitable for damp locations. Classified for use in hazardous and/or explosive atmospheres. 180 high, 75 low lumens. 2 hour 30 minutes high, 4 hour 30 minutes low run time, 100 meters high, 75 meters low beam distance. Push button switch. Hi/lo mode, flash mode and flood reflector. Uses 3 AA batteries, not included. 2.46"H x 1.89"L x 3.19" W.
Powerzone LR20-4P-DB Alkaline Battery LIGHT WRAP LED 4FT 40W 3600LMS Coast HL7R Adjustable Rechargeble Head Lamp
Mercury and cadmium free. Wrap light, 4000K, 50,000 hours rated lifetime. UL/cUL- Damp Locations. UV, IR and Mercury-free. Energy Star. Rechargeable headlamp with adjustable focus and light dimming functions. Adjustable from spot to flood. Larger power switch and easy to grip focusing bezel. Dimming function adjusts light output. Expandable Z-cord provides power to the LED from the battery pack and is built in to the headband to reduce the possibility of snagging. Unbreakable LED, impact and water resistant. Twist focus. 240 lumens high/4 lumens low light output, 1 hour 30 min. high/26 hours low runtime. 106 meters high/21 hours low beam distance. Adjustable elastic straps. Hinged beam adjustment to position light. 4.4 ounces (including batteries). Tested and rated to ANSI/FL1 standards. Uses three AAA rechargeable NiMH batteries (included).
Acuity 256439 Narrow Wrap Fluorescent Fixture Powerzone LR14-4P-DB Alkaline Battery LIGHT WRAP LED 2FT 25W 1800LMS
Low profile, narrow wrap light fixture, 2 light, 32 watt. White steel housing and clear prismatic diffuser with white metal ends. Diffuser hinges from either side for easy mounting. Uses 2 each F32  T8 lamps (not included). Energy star qualified, meets new energy legislation requirements. 48-1/4" x 7-9/16" x 3". Mercury and cadmium free. Wrap light, 4000K, 50,000 hours rated lifetime. UL/cUL- Damp Locations. UV, IR and Mercury-free. Energy Star.
Murray LNF222RU Non-Fusible Lever Safety Switch Reliance PB30 Manual Outdoor Power Inlet Box GE Electrical TG3221R Spec-Setter Safety Switches
Single phase, 2 pole, 3 wire, 240 volt, 10,000 AIC maximum, rated 10 HP maximum. Compact size, quick-make, quick-break mechanism, galvanized steel enclosure. Bottom cable entry and exit only, no hub provision supplied. Padlocking provisions to lock cover or lock in off position. Lugs suitable for copper or aluminum. Silver plated copper conductors. GSGK60 equipment ground kit sold separately. Number 14-3 AWG line and load wire range. 5-9/16" x 8-1/4" x 3-1/8". UL Listed file No.E4776, NEMA Type GD, meets federal specifications WS865C. Outdoor NEMA 3R power inlet box. May be installed outdoors up to 100 feet from a home's load center so your generator can be plugged in outside, away from open doors or windows. Designed to be hard-wired directly to Reliance transfer switches with building wire. Has four combination 1/2" and 3/4" knockouts (one on each side, bottom and back). 6" height x 4" width x 2.63" depth. UL listed. Designed for residential or light commercial applications where duty is not severe. Meets or exceeds NEMA Enclosed Switch Standard KS1-1983 for type GD, CSA certified; 60 degrees C/75 degrees C conductor rating. Two pole, 120/240 volt AC; 250 volt DC. Removable closing cap. Accepts Class H fuses (not included). Feature quick make, quick break mechanism. Suitable for use as service entrance equipment when installed in accordance with National Electrical Code. 6-7/8" x 9-7/8" x 3-5/16".UL Listed (Enclosed Switches No. 98).
Powerzone 6LR61-2P-DB Alkaline Battery Square D D221NRBCP Fusible General Duty Safety Switch LIGHT TROFFER 2X2 120V NON-DIM
Mercury and cadmium free. Single phase, 2 pole, 3 wire, 2 blades and fuseholders, factory installed solid neutral, 120/240 volt AC, with metallic enclosure. Bolt on hubs. Rated 1-1/2 HP. For residential or commercial applications. Typical loads include lighting, air conditioning, appliances and branch circuit disconnects. 7.25" x 9.63" x 3.75". UL Listed, meets NEMA 3R standard. GTL LED lensed troffers. Patterned number 12 acrylic lens. Smooth hemmed sides and smooth inward formed end flanges. 4000K, 60,000 hours. Damp location listed. CSA certified to US and Canadian standards.
FIXTURE WRP4LT 32W 4FT OAK END Cutler-Hammer DG321NRB Safety Switches LIGHT LED DIM FLUSH 2X1FT 20W
Uses a residential electronic ballast (120 volt, 60Hz) for instant on, ensures no flickering and quiet operation without interfering with other home electronics. For use with non-dimmable switches only. Steel enclosure. 3 pole, 4 wire, 3 blades, 3 class H cartridge fuses (not included), solid neutral, 120/240 volt AC, Rated 1-1/2 to 3 HP single phase, to 7-1/2 HP 3-phase at 240 volt only when dual element fuses are used. For residential or light commercial applications. Suitable for light duty motor circuits and service entrance. For use on systems capable of delivering up to 10,000 RMS, symmetrical fault current. Ample wire bending space for easier installation. DS100GK ground lug kit sold separately. 6-3/4" x 9-1/8" x 6-3/4". UL Listed file No.E5239; meets UL98 for enclosed switches and NEMA standard KS1. LED lamp is designed to be used anywhere a standard fluorescent fixture is used. 50,000 hour rated lifetime, 4000K. UV, IR and mercury free. UL/cUL Listed for damp locations.
SHOPLIGHT 40IN LED50W BLUTOOTH Reliance PB50 Outdoor Power Inlet Box LIGHT WRAP WATERPRF LED 6600 L
Bluetooth speaker enhanced LED shoplight comes with 2 speakers and chain packet to suspend. For workshops, hobby rooms, basements, sheds, garages or anywhere additional light is needed. Bluetooth speakers pair with IPhone and Android smart phones. Speakers have a 30 foot range. 35 watts, 120 volt, 3200 lumens, 4000K, 50,000 hours rated life. Instant start down to -4 degreesF. Energy Star and cUL certified. Outdoor NEMA 3R power inlet box. May be installed outdoors up to 100 feet from a home's load center so your generator can be plugged in outside, away from open doors or windows. Designed to be hard-wired directly to Reliance transfer switches with building wire. Has four combination 1/2" and 3/4" knockouts (one on each side, bottom and back). 6" height x 4" width x 2.63" depth. UL listed. Waterproof Wrap Light. 6600 Lumen. LED
FIXTURE FLUO OVAL CIRC 2-32WT9 LITEPUFF FLUSHMNT 2LT 32W1X4FT TROFFER LED SLIM 2X2 43W 5000K
Residential and light commercial applications. White glass diffuser for a widespread uniform illumination. Center finial provides easy access for cleaning and maintenance. Includes (1) 55W 2C T6 2700K fluorescent lamp. Standard with 120V residential electronic ballast, 60HZ. No flickering and quiet operation without interfering with other home electronics. CUL listed to US and Canadian safety standards and suitable for damp locations. Low-profile, linear fixture with durable white acrylic diffuser. Thermal formed diffuser. One piece contemporary design wraps around the diffuser to soften the appearance. Surface-mount residential and light commercial applications. All mounting hardware included. CUL Listed. One-for-one replacement of conventional linear fluorescent lay-in troffers. Dimmable flat panel LED. 42.5 watts, 100-277 VAC, 4250 lumens, 5000K, rated lifetime 80,000 hours. UV, IR and Mercury-free. UL/cUL-damp locations.
WRAP LED 4FT HIGH OUTPUT 58W  SPEAKER SHPLT BLUETOOTH LED   LIGHT LED DIM FLUSH 4X1FT 40W
Perfect where traditionally a fluorescent fixture would be used such as kitchens, laundry, basements, garages, utility rooms, workshops and closets. 58 watts, 120 volt, 5200 lumens, 4000K bright white light. 50,000 hour rated life. Instant start down to -4 degrees F. Energy Star and cUL certified. LED lamp is designed to be used anywhere a standard fluorescent fixture is used. 50,000 hour rated lifetime, 4000K. UV, IR and mercury free. UL/cUL Listed for damp locations.
LIGHT LED 4X1FT 40W FLUSH MNT TROFFER LED SLIM 2X4 47W 5000K LIGHT LED DIM FLSH 4X1.5FT 75W
LED lamp is designed to be used anywhere a standard fluorescent fixture is used. 50,000 hour rated lifetime, 4000K. UV, IR and mercury free. UL/cUL Listed for damp locations. One-for-one replacement of conventional linear fluorescent lay-in troffers. Dimmable flat panel LED. 42.5 watts, 100-277 VAC, 4250 lumens, 5000K, rated lifetime 80,000 hours. UV, IR and Mercury-free. UL/cUL-damp locations. LED lamp is designed to be used anywhere a standard fluorescent fixture is used. 50,000 hour rated lifetime, 4000K. UV, IR and mercury free. UL/cUL Listed for damp locations.
Reliance 30216A Manual Transfer Switch Coghlan'S 31406CRK Manual Transfer Switch Kit Reliance Generator Transfer Switch
Built for generators up to 7500 watts. Features 6 large toggle switches that provide control of circuits, backup pushbutton breakers for each circuit and a wattage meter to monitor the appliance load on the generator. Features a built-in NEMA L14-30, 30 watt power cord inlet, 3/4" pre-wired conduit that attaches to load center. NEMA Indoor cabinet. 30 amp maximum combined load at 125 vac, 30 amp maximum combined load at 250 vac. 6 single-pole circuits: 4 single pole 15 amp circuit breakers, 2 single pole 20 amp circuit breakers. One double-pole circuit. 10 gauge cord recommended. 7.5" height x 7" width x 4.5" depth, 9 pounds shipping weight. Full color packaging. UL1008 Listed. All inclusive, fits generators up to 7500 watts with 20 or 30 amp L1420 or L1430 power outlets. Includes 6-circuit transfer switch with watt meter, 30 amp outdoor power inlet box, 10 Ft. 10 gauge 30 amp power cord, spare 20 amp power cord plug end for smaller generators, easy-to-follow installation and operating instructions, and wire connectors. Full-color packaging. Maximum of 6 single-pole circuits or 1 double-pole circuit. 60 amp maximum combined load at 125 volt, 30 amp at 250 volt. Four 15 amp single pole circuit breakers, two 20 amp single pole circuit breakers. UL1008 Listed. Suitable for hardwire connection to PB50 power inlet box. Switch has 10 toggle switches to control the circuit breakers under generator power. It is set up at the factory to be connected to a double pole 30 amp breaker (to control a central air conditioner or electric water heater), a double pole 20 amp breaker (to control a well pump) and six 15 amp 120 volt circuit breakers. Integrated, interchangeable one-inch circuit breakers in the switch make multiple connection options possible. 12,500 maximum generator wattage. Analog watt meter. 13" height x 11.75" width x 4.5" depth. UL 100B Listed.
   
 
1