Home > ELECTRICAL > HOUSEHOLD ELECTRICAL > EXTENSION CORDS > GENERATOR CORDS
Sort By:
1
Cooper 270B Grounded  Duplex Receptacle Cooper 270V Grounded  Duplex Receptacle Cooper 270W Grounded  Duplex Receptacle
Built-in wire stripper for number 14 wire. Built-in wire looper for pre-looping conductors. Screw-catch feature eliminates need to hand-thread screw and possible cross-threading. Double wipe ground contacts. Split circuit break-off tab. Side wire terminals accept up to number 10 solid or stranded wire. Push-in terminals accept number 14 solid wire only. 15 amp/125 volt. UL Listed, NOM certified, meets CSA requirements. Built-in wire stripper for number 14 wire. Built-in wire looper for pre-looping conductors. Screw-catch feature eliminates need to hand-thread screw and possible cross-threading. Double wipe ground contacts. Split circuit break-off tab. Side wire terminals accept up to number 10 solid or stranded wire. Push-in terminals accept number 14 solid wire only. 15 amp/125 volt. UL Listed, NOM certified, meets CSA requirements. Built-in wire stripper for number 14 wire. Built-in wire looper for pre-looping conductors. Screw-catch feature eliminates need to hand-thread screw and possible cross-threading. Double wipe ground contacts. Split circuit break-off tab. Side wire terminals accept up to number 10 solid or stranded wire. Push-in terminals accept number 14 solid wire only. 15 amp/125 volt. UL Listed, NOM certified, meets CSA requirements.
RECEPTACLE DUPLEX 15A 125V LA Orrco 60170 Hex Nut Jandorf 60204 Flat Crossbar
Built-in wire stripper for number 14 wire. Built-in wire looper for pre-looping conductors. Screw-catch feature eliminates need to hand-thread screw and possible cross-threading. Double wipe ground contacts. Split circuit break-off tab. Side wire terminals accept up to number 10 solid or stranded wire. Push-in terminals accept number 14 solid wire only. 15 amp/125 volt. UL Listed, NOM certified, meets CSA requirements. Holds connecting parts in place. Crossbar for mounting light fixtures.
Cooper TR270W  Tamper Resistant Duplex Receptacle Cooper TR270V  Tamper Resistant Duplex Receptacle Cooper TR270V Tamper Resistant Duplex Receptacle
Receptacle is tamper resistant with a UL Listed shutter system and impact-resistant thermoplastic face and back body that is virtually unbreakable. The 2008 National Electrical Code (NEC) states that "Effective January 1, 2008, all receptacles installed in new dwelling units must be tamper-resistant." Features a wire stripper for #14 and #12 wire, extra long and wide mounting straps and tri-combo screws that accept slotted, Phillips and Robertson-head tools. Terminal screws are backed out and ready to wire. Side-wire terminals accept up to #10 solid or stranded wire. Push in terminals accept #14 solid wire. Screw-catch feature speeds wall plate installation. UL, cULus Listed. Receptacle is tamper resistant with a UL Listed shutter system and impact-resistant thermoplastic face and back body that is virtually unbreakable. The 2008 National Electrical Code (NEC) states that "Effective January 1, 2008, all receptacles installed in new dwelling units must be tamper-resistant." Features a wire stripper for #14 and #12 wire, extra long and wide mounting straps and tri-combo screws that accept slotted, Phillips and Robertson-head tools. Terminal screws are backed out and ready to wire. Side-wire terminals accept up to #10 solid or stranded wire. Push in terminals accept #14 solid wire. Screw-catch feature speeds wall plate installation. UL, cULus Listed. Receptacle is tamper resistant with a UL Listed shutter system and impact-resistant thermoplastic face and back body that is virtually unbreakable. The 2008 National Electrical Code (NEC) states that "Effective January 1, 2008, all receptacles installed in new dwelling units must be tamper-resistant." Features a wire stripper for #14 and #12 wire, extra long and wide mounting straps and tri-combo screws that accept slotted, Phillips and Robertson-head tools. Terminal screws are backed out and ready to wire. Side-wire terminals accept up to #10 solid or stranded wire. Push in terminals accept #14 solid wire. Screw-catch feature speeds wall plate installation. UL, cULus Listed.
Cooper TR270W Tamper Resistant Duplex Receptacle RECEPTACLE DUPLEX LIGHT ALMOND Jandorf 60230 Lamp Lock-Up Cap
Receptacle is tamper resistant with a UL Listed shutter system and impact-resistant thermoplastic face and back body that is virtually unbreakable. The 2008 National Electrical Code (NEC) states that "Effective January 1, 2008, all receptacles installed in new dwelling units must be tamper-resistant." Features a wire stripper for #14 and #12 wire, extra long and wide mounting straps and tri-combo screws that accept slotted, Phillips and Robertson-head tools. Terminal screws are backed out and ready to wire. Side-wire terminals accept up to #10 solid or stranded wire. Push in terminals accept #14 solid wire. Screw-catch feature speeds wall plate installation. UL, cULus Listed. Receptacle is tamper resistant with a UL Listed shutter system and impact-resistant thermoplastic face and back body that is virtually unbreakable. The 2008 National Electrical Code (NEC) states that "Effective January 1, 2008, all receptacles installed in new dwelling units must be tamper-resistant." Features a wire stripper for #14 and #12 wire, extra long and wide mounting straps and tri-combo screws that accept slotted, Phillips and Robertson-head tools. Terminal screws are backed out and ready to wire. Side-wire terminals accept up to #10 solid or stranded wire. Push in terminals accept #14 solid wire. Screw-catch feature speeds wall plate installation. UL, cULus Listed. Tapped 1/8" IP.
Jandorf 60203 Offset Crossbar Kit Arrow Hart CR15W  Duplex Receptacle Cooper 736B-BOX  Duplex Receptacle
Crossbar for mounting light fixtures. Triple wipe line contacts provide long-term plug retention. Double wipe ground contacts. 0.050" thick steel wrap-around mounting strap zinc-plated for corrosion resistance. Split circuit break-off tab. Automatic grounding system eliminates need for bonding jumper in grounded metal enclosure. Side wire terminals accept up to #10 solid or stranded wire. Meets all UL 498 requirements UL Listed. Standard contacts. Side wire terminals accept up to #12 wire. Terminal screws backed out, ready for wiring. 15 amp/125 volt. UL Listed.
Cooper 736V-BOX  Duplex Receptacle Cooper 736W-BOX  Duplex Receptacle Jandorf 60144 Lamp Coupling
Standard contacts. Side wire terminals accept up to #12 wire. Terminal screws backed out, ready for wiring. 15 amp/125 volt. UL Listed. Standard contacts. Side wire terminals accept up to #12 wire. Terminal screws backed out, ready for wiring. 15 amp/125 volt. UL Listed. Decorative piece that connects nipples of different sizes together.
Jandorf 60232 Lamp Lock-Up Cap Jandorf 60162 Lamp Nipple Jandorf 60234 Lamp Lockup Kit
Tapped 1/8" IP. For repairing or making lighting fixtures and lamps. Secures center mount glass shade to ceiling fixture. Kit contains 1 - 1-1/8" check ring, 1 - lock-up cap 1/8 IP, 1 - 1/8 IP x 1" OD rubber washer white.
Jandorf 60235 Lamp Lockup Kit Jandorf 60109 Tapped Top Hat Lamp Finial Arrow Hart CR15B  Duplex Receptacle
Secures center mount glass shade to ceiling fixture. Kit contains 1 - 1-1/8" check ring, 1 - lock-up cap 1/8 IP, 1 - 1/8 IP x 1" OD rubber washer white. Secures lamp shade to harp. Triple wipe line contacts provide long-term plug retention. Double wipe ground contacts. 0.050" thick steel wrap-around mounting strap zinc-plated for corrosion resistance. Split circuit break-off tab. Automatic grounding system eliminates need for bonding jumper in grounded metal enclosure. Side wire terminals accept up to #10 solid or stranded wire. Meets all UL 498 requirements UL Listed.
Arrow Hart CR15V  Duplex Receptacle Jandorf 60163 Lamp Nipple Jandorf 60231 Lamp Lock-Up Cap
Triple wipe line contacts provide long-term plug retention. Double wipe ground contacts. 0.050" thick steel wrap-around mounting strap zinc-plated for corrosion resistance. Split circuit break-off tab. Automatic grounding system eliminates need for bonding jumper in grounded metal enclosure. Side wire terminals accept up to #10 solid or stranded wire. Meets all UL 498 requirements UL Listed. For repairing or making lighting fixtures and lamps. Tapped 1/8" IP.
Jandorf 60145 Reducer Jandorf 60141 Assorted Lamp Screw Jandorf 94991 Beaded Chain With NO 6 Connector
Connects nipples of different sizes. Used for holding lamp parts in place. Contains 3 each 8/32" x 1/2" knurled head screws - brass plated, 8/32" x 1/2" knurled head screws - nickel plated, and 8/32" x 3/4" knurled head screws - brass plated, and two each of 8/32" x 1" slotted machine screws - brass plated and 8/32" x 2" slotted machine screws - brass plated. With connector.
Jandorf 94992 Beaded Chain With NO 6 Connector Jandorf 94993 Beaded Chain With NO 6 Connector Jandorf 60146 Reducer
With connector. With connector. Connects nipples of different sizes.
Jandorf 60354 Chain Connector Jandorf 60358 Chain Connector Cooper 1107V Decorator  Duplex Receptacle
Links together two beaded chains. Links together two beaded chains. Longer, wider strap provides 40 percent more contact area to wall board. Virtually eliminates floating installations. Built-in wire stripper for number 14 and number 12 wire and wire looper for pre-looping. Combination slot/Phillips head mounting and terminal screws for installation with power screwdrivers. Terminal screws backed out - ready for wiring. Side wire terminals accept up to number 10 solid or stranded wire. Push-in terminals accept number 14 solid wire. Temperature range of -40 to 65 degrees C. Meets all UL 498 requirements, (file no. E15058), Fed. Specs. WC-596G, NOM Certified, CSA Certified, C22.2 no.42. Standard Grade: (file no.6914) (6233-01). Meets flammability requirements per UL94, V2 rated. 15 amp, 125 volt.
Cooper 1107W Grounded  Duplex Receptacle RECEPTACLE DECOR 2P 3W 15A LA Jandorf 60226 Candelabra Base Socket Cover
Longer, wider strap provides 40 percent more contact area to wall board. Virtually eliminates floating installations. Built-in wire stripper for number 14 and number 12 wire and wire looper for pre-looping. Combination slot/Phillips head mounting and terminal screws for installation with power screwdrivers. Terminal screws backed out - ready for wiring. Side wire terminals accept up to number 10 solid or stranded wire. Push-in terminals accept number 14 solid wire. Temperature range of -40 to 65 degrees C. Meets all UL 498 requirements, (file no. E15058), Fed. Specs. WC-596G, NOM Certified, CSA Certified, C22.2 no.42. Standard Grade: (file no.6914) (6233-01). Meets flammability requirements per UL94, V2 rated. 15 amp, 125 volt. Receptacle is tamper resistant with a UL Listed shutter system and impact-resistant thermoplastic face and back body that is virtually unbreakable. The 2008 National Electrical Code (NEC) states that "Effective January 1, 2008, all receptacles installed in new dwelling units must be tamper-resistant." Features a wire stripper for number 14 and number 12 wire, extra long and wide mounting straps and tri-combo screws that accept slotted, Phillips and Robertson-head tools. Terminal screws are backed out and ready to wire. Side-wire terminals accept up to number 10 solid or stranded wire. Push in terminals accept number 14 solid wire. Screw-catch feature speeds wall plate installation. 15 amp, 125 volt. NEMA 5-15R. UL, cULus Listed. Covers base socket. For use with a maximum 25W bulb.
Jandorf 94995 Beaded Chain With NO 10 Connector Jandorf 60148 Reducer Jandorf 60351 Chain Connector
With connector. Connects nipples of different sizes. Links together two beaded chains.
Jandorf 60353 Chain Connector Jandorf 60355 Pull Chain Bell Jandorf 60370 Chain Connector
Links together two beaded chains. Decorative attachment for end of beaded chain. Links together two beaded chains.
Jandorf 60372 Chain Connector Jandorf 60374 Chain Connector Jandorf 60375 Pull Chain Bell
Links together two beaded chains. Links together two beaded chains. Decorative attachment for end of beaded chain.
Jandorf 60376 Chain Connector Jandorf 60233 Lamp Lock-Up Cap Jandorf 60160 Lamp Nipple
Links together two beaded chains. Tapped 1/8" IP. For repairing or making lighting fixtures and lamps.
Jandorf 60208 Flat Crossbar Jandorf 60227 Standard Base Socket Cover Orrco 60142 Socket Key With 1/2 in Extension
Crossbar for mounting light fixtures. Covers base socket. For use with a maximum 25W bulb. Turns lamp on and off. Socket keys and 1/2" extensions, 4/36F x 4/36M.
Jandorf 60243 Lamp Loop RECEPTACLE BULK LT ALMOND 20A Arrow Hart CR20W Grounded Duplex Receptacle
Decorative piece used for hanging fixtures. 1/8 IP brass finish. Triple wipe line contacts provide long-term plug retention. Double wipe ground contacts. 0.050" thick steel wrap-around mounting strap zinc-plated for corrosion resistance. Split circuit break-off tab. Automatic grounding system eliminates need for bonding jumper in grounded metal enclosure. Side wire terminals accept up to #10 solid or stranded wire. Meets all UL 498 requirements UL Listed. Triple wipe line contacts provide long-term plug retention. Double wipe ground contacts. 0.050" thick steel wrap-around mounting strap zinc-plated for corrosion resistance. Split circuit break-off tab. Automatic grounding system eliminates need for bonding jumper in grounded metal enclosure. Side wire terminals accept up to #10 solid or stranded wire. Meets all UL 498 requirements UL Listed.
Arrow Hart CR20V Grounded Duplex Receptacle Arrow Hart CR20B Grounded Duplex Receptacle Jandorf 60149 Lamp Coupling
Triple wipe line contacts provide long-term plug retention. Double wipe ground contacts. 0.050" thick steel wrap-around mounting strap zinc-plated for corrosion resistance. Split circuit break-off tab. Automatic grounding system eliminates need for bonding jumper in grounded metal enclosure. Side wire terminals accept up to #10 solid or stranded wire. Meets all UL 498 requirements UL Listed. Triple wipe line contacts provide long-term plug retention. Double wipe ground contacts. 0.050" thick steel wrap-around mounting strap zinc-plated for corrosion resistance. Split circuit break-off tab. Automatic grounding system eliminates need for bonding jumper in grounded metal enclosure. Side wire terminals accept up to #10 solid or stranded wire. Meets all UL 498 requirements UL Listed. Decorative piece that connects nipples of different sizes together.
Jandorf 60250 Lamp Canopy Ball Spot-Gro C270V Duplex  Electrical Receptacle Cooper C270W  Duplex Receptacle
Secures canopy or blank up to crossbar. 8/32 thread, 3/8" diameter solid brass. Built-in wire stripper for number 14 wire. Built-in wire looper for pre-looping conductors. Screw-catch feature eliminates need to hand-thread screw and possible cross-threading. Double wipe ground contacts. Split circuit break-off tab. Side wire terminals accept up to number 10 solid or stranded wire. Push-in terminals accept number 14 solid wire only. 15 amp/125 volt. UL Listed, NOM certified, meets CSA requirements. Built-in wire stripper for number 14 wire. Built-in wire looper for pre-looping conductors. Screw-catch feature eliminates need to hand-thread screw and possible cross-threading. Double wipe ground contacts. Split circuit break-off tab. Side wire terminals accept up to number 10 solid or stranded wire. Push-in terminals accept number 14 solid wire only. 15 amp/125 volt. UL Listed, NOM certified, meets CSA requirements.
Jandorf 60171 Lamp Nipple Jandorf 60173 Lamp Nipple Jandorf 60100 Spindle Finial
For repairing or making lighting fixtures and lamps. For repairing or making lighting fixtures and lamps. Secures lamp shade to harp.
Jandorf 60147 Reducer Jandorf 60360 Pull Chain Bell Jandorf 60237 Ceiling Hickey
Connects nipples of different sizes. Decorative attachment for end of beaded chain. Used for mounting drop fixtures.
Jandorf 60238 Ceiling Hickey Jandorf 60205 Offset Swivel Crossbar Orrco 60167 Hex Nut
Used for mounting drop fixtures. Crossbar for mounting light fixtures. Holds connecting parts in place.
RECEPTACLE DECO AG LT ALMOND  Cooper 1107-9BK Decorator  Duplex Receptacle Arrow Hart BR15V  Duplex Receptacle
Terminal screws backed out-ready for wiring. Push-in terminals accept number 14 solid wire. Side wire terminals accept up to number 10 solid or stranded wire. Longer, wider strap provides 40 percent more contact area to wall board. Combination slot/Phillips head mounting and terminal screws ease installation with power screwdrivers. Virtually eliminates floating installations. Built-in wire stripper for number 14 and number 12 wire to speed installation. Built-in wire looper for pre-looping. Temperature range of -40 to 65 degrees C. Meets all UL 498 requirements, (file no.E15058), Fed.Specs.WC-596G, NOM Certified, CSA Certified, C22.2 no.42. Standard Grade: (file no.6914) (6233-01). Meets flammability requirements per UL94, V2 rated. 15 amp, 125 volt. Terminal screws backed out-ready for wiring. Push-in terminals accept number 14 solid wire. Side wire terminals accept up to number 10 solid or stranded wire. Longer, wider strap provides 40 percent more contact area to wall board. Combination slot/Phillips head mounting and terminal screws ease installation with power screwdrivers. Virtually eliminates floating installations. Built-in wire stripper for number 14 and number 12 wire to speed installation. Built-in wire looper for pre-looping. Temperature range of -40 to 65 degrees C. Meets all UL 498 requirements, (file no.E15058), Fed.Specs.WC-596G, NOM Certified, CSA Certified, C22.2 no.42. Standard Grade: (file no.6914) (6233-01). Meets flammability requirements per UL94, V2 rated. 15 amp, 125 volt. High impact-resistant thermoplastic face. Triple wipe line contacts for long-term plug retention. Double wipe ground contacts for ground retention. .050" thick steel wrap-around mounting strap zinc-plated for corrosion resistance. Easy access split circuit break-off tab. Automatic grounding system eliminates need for bonding jumper in grounded metal enclosure. Back and side wire terminals accept #14, #12 and #10 solid or stranded wire. Terminal screws backed out. Combination slot/Phillips head mounting and terminal screws. Meets all UL 498 requirements. Federal specifications WC-596. Bulk Pak. UL Listed.
Arrow Hart BR15W  Duplex Receptacle Jandorf 60150 Lamp Coupling Jandorf 60164 Lamp Nipple
High impact-resistant thermoplastic face. Triple wipe line contacts for long-term plug retention. Double wipe ground contacts for ground retention. .050" thick steel wrap-around mounting strap zinc-plated for corrosion resistance. Easy access split circuit break-off tab. Automatic grounding system eliminates need for bonding jumper in grounded metal enclosure. Back and side wire terminals accept #14, #12 and #10 solid or stranded wire. Terminal screws backed out. Combination slot/Phillips head mounting and terminal screws. Meets all UL 498 requirements. Federal specifications WC-596. Bulk Pak. UL Listed. Decorative piece that connects nipples of different sizes together. For repairing or making lighting fixtures and lamps.
Orrco 60143 Socket Knob With 1/2 in Extension Jandorf 60151 Reducer Jandorf 60161 Lamp Nipple
Turns lamp on and off. Includes 2 socket knobs - black, 2 - 1/2" extensions, 4/36F x 4/36M with brass finish. Connects nipples of different sizes. For repairing or making lighting fixtures and lamps.
Cooper TR1107W Decorative Tamper Resistant Duplex Receptacle Cooper TR1107V Decorative Tamper Resistant Duplex Receptacle Jandorf 60240 Ceiling Hickey
Receptacle is tamper resistant with a UL Listed shutter system and impact-resistant thermoplastic face and back body that is virtually unbreakable. The 2008 National Electrical Code (NEC) states that "Effective January 1, 2008, all receptacles installed in new dwelling units must be tamper-resistant." Features a wire stripper for number 14 and number 12 wire, extra long and wide mounting straps and tri-combo screws that accept slotted, Phillips and Robertson-head tools. Terminal screws are backed out and ready to wire. Side-wire terminals accept up to number 10 solid or stranded wire. Push in terminals accept number 14 solid wire. Screw-catch feature speeds wall plate installation. 15 amp, 125 volt. NEMA 5-15R. UL, cULus Listed. Receptacle is tamper resistant with a UL Listed shutter system and impact-resistant thermoplastic face and back body that is virtually unbreakable. The 2008 National Electrical Code (NEC) states that "Effective January 1, 2008, all receptacles installed in new dwelling units must be tamper-resistant." Features a wire stripper for number 14 and number 12 wire, extra long and wide mounting straps and tri-combo screws that accept slotted, Phillips and Robertson-head tools. Terminal screws are backed out and ready to wire. Side-wire terminals accept up to number 10 solid or stranded wire. Push in terminals accept number 14 solid wire. Screw-catch feature speeds wall plate installation. 15 amp, 125 volt. NEMA 5-15R. UL, cULus Listed. Used for mounting drop fixtures.
Jandorf 60241 Ceiling Hickey Orrco 60201 Ceiling Crossbar Kit Jandorf 60174 Lamp Nipple
Used for mounting drop fixtures. Crossbar for mounting light fixtures. For repairing or making lighting fixtures and lamps.
Orrco 60169 Hex Nut Cooper BP850V Night Light Cooper BP850W Night Light
Holds connecting parts in place. Meets all UL 1786 requirements. Soft action rocker switch. 3,000 hour lamp life. Shade can rotate 360 degrees. Molded of heat resistant plastic. 15 amp, 125 volt. UL Listed.  Carded. Meets all UL 1786 requirements. Soft action rocker switch. 3,000 hour lamp life. Shade can rotate 360 degrees. Molded of heat resistant plastic. 15 amp, 125 volt. UL Listed.  Carded.
NTLT TIPI LED MNUL FROST LENS Cooper TR1107V Decorator Tamper Resistant Duplex Receptacle Cooper TR1107W Decorator Tamper Resistant Duplex Receptacle
Turns on with a switch and gives off 1 lumen of illumination through a frosted lens, enough to see by without being obtrusive. Great for bedrooms, hallways, entryways, basements, bathrooms and more. Designed with a modern style that works with any decor. Receptacle is tamper resistant with a UL Listed shutter system and impact-resistant thermoplastic face and back body that is virtually unbreakable. The 2008 National Electrical Code (NEC) states that "Effective January 1, 2008, all receptacles installed in new dwelling units must be tamper-resistant." Features a wire stripper for number 14 and number 12 wire, extra long and wide mounting straps and tri-combo screws that accept slotted, Phillips and Robertson-head tools. Terminal screws are backed out and ready to wire. Side-wire terminals accept up to number 10 solid or stranded wire. Push in terminals accept number 14 solid wire. Screw-catch feature speeds wall plate installation. 15 amp, 125 volt. NEMA 5-15R. UL, cULus Listed. Receptacle is tamper resistant with a UL Listed shutter system and impact-resistant thermoplastic face and back body that is virtually unbreakable. The 2008 National Electrical Code (NEC) states that "Effective January 1, 2008, all receptacles installed in new dwelling units must be tamper-resistant." Features a wire stripper for number 14 and number 12 wire, extra long and wide mounting straps and tri-combo screws that accept slotted, Phillips and Robertson-head tools. Terminal screws are backed out and ready to wire. Side-wire terminals accept up to number 10 solid or stranded wire. Push in terminals accept number 14 solid wire. Screw-catch feature speeds wall plate installation. 15 amp, 125 volt. NEMA 5-15R. UL, cULus Listed.
Jandorf 60239 Ceiling Hickey Jandorf 60361 Beaded Chain With NO 6 Connector Jandorf 60110 Tapped Top Hat Lamp Finial
Used for mounting drop fixtures. With connector. Secures lamp shade to harp.
Jandorf 60209 Flat Crossbar With Nipple Jandorf 60172 Lamp Nipple Jandorf 60102 Tapped Pyramid Finial
Crossbar for mounting light fixtures. For repairing or making lighting fixtures and lamps. Secures lamp shade to harp.
Arrow Hart BR20V  Duplex Receptacle Arrow Hart BR20W  Duplex Receptacle Arrow Hart BR20A  Duplex Receptacle
High impact-resistant thermoplastic face. Triple wipe line contacts for long-term plug retention. Double wipe ground contacts for ground retention. .050" thick steel wrap-around mounting strap zinc-plated for corrosion resistance. Easy access split circuit break-off tab. Automatic grounding system eliminates need for bonding jumper in grounded metal enclosure. Back and side wire terminals accept #14, #12 and #10 solid or stranded wire. Terminal screws backed out. Combination slot/Phillips head mounting and terminal screws. Meets all UL 498 requirements. Federal specifications WC-596. Bulk Pak. UL Listed. High impact-resistant thermoplastic face. Triple wipe line contacts for long-term plug retention. Double wipe ground contacts for ground retention. .050" thick steel wrap-around mounting strap zinc-plated for corrosion resistance. Easy access split circuit break-off tab. Automatic grounding system eliminates need for bonding jumper in grounded metal enclosure. Back and side wire terminals accept #14, #12 and #10 solid or stranded wire. Terminal screws backed out. Combination slot/Phillips head mounting and terminal screws. Meets all UL 498 requirements. Federal specifications WC-596. Bulk Pak. UL Listed. High impact-resistant thermoplastic face. Triple wipe line contacts for long-term plug retention. Double wipe ground contacts for ground retention. .050" thick steel wrap-around mounting strap zinc-plated for corrosion resistance. Easy access split circuit break-off tab. Automatic grounding system eliminates need for bonding jumper in grounded metal enclosure. Back and side wire terminals accept #14, #12 and #10 solid or stranded wire. Terminal screws backed out. Combination slot/Phillips head mounting and terminal screws. Meets all UL 498 requirements. Federal specifications WC-596. Bulk Pak. UL Listed.
Jandorf 60175 Lamp Nipple Jandorf 60101 Spindle Finial Jandorf 60357 Pull Chain Coupling
For repairing or making lighting fixtures and lamps. Secures lamp shade to harp. Used to secure beaded chain with a fastener.
Jandorf 60359 Pull Chain Coupling Jandorf 60103 Tapped Pyramid Finial Orrco 60168 Locknut Assortment
Used to secure beaded chain with a fastener. Secures lamp shade to harp. Holds connecting parts in place. Contains two each 1/4-27 knurled locknuts, 1/8 IP knurled locknuts, 1/4 IP knurled locknuts, 8/32 battery nuts and four 1/8 IP hex nuts.
NTLT ARIA LED A/O FROST LENS  Jandorf 60356 Pull Chain Coupling Jandorf 60242 Lamp Loop
Night time lighting solution. Automatically turns on in low light with enough light to see by without being obtrusive. 3000K warm illumination. Used to secure beaded chain with a fastener. Decorative piece used for hanging fixtures. 1/8 IP brass finish.
Jandorf 60106 Tapped Bullet Finial Jandorf 60120 Clip-On Lamp Shade Adapter RECEPTACLE COMM LT ALMOND 20A
Secures lamp shade to harp. Brass finish. High impact-resistant thermoplastic face. Triple wipe line contacts for long-term plug retention. Double wipe ground contacts for ground retention. .050" thick steel wrap-around mounting strap zinc-plated for corrosion resistance. Easy access split circuit break-off tab. Automatic grounding system eliminates need for bonding jumper in grounded metal enclosure. Back and side wire terminals accept #14, #12 and #10 solid or stranded wire. Terminal screws backed out. Combination slot/Phillips head mounting and terminal screws. Meets all UL 498 requirements. Federal specifications WC-596. Bulk Pak. UL Listed.
Cooper 5270  Standard Duplex Receptacle Cooper 5270  Standard Duplex Receptacle Cooper BP458NP-SP Canopy Switch With Bell End
Meets all UL 498 and 1567 requirements. Longer, wider strap provides 40 percent more contact area. Side wire terminals accept up to #10 solid or standard copper or aluminum wire. Terminal screws backed out. Combination slot/Phillips head mounting and terminal screws ease installation with power screwdrivers. 15 amp, 125 volt. Bulk pack. Meets all UL 498 and 1567 requirements. Longer, wider strap provides 40 percent more contact area. Side wire terminals accept up to #10 solid or standard copper or aluminum wire. Terminal screws backed out. Combination slot/Phillips head mounting and terminal screws ease installation with power screwdrivers. 15 amp, 125 volt. Bulk pack. UL Listed, (file no.E18704). Meets all CSA requirements, C22.2 no.111. For use in fixtures, appliances, and equipment. Shank is threaded 15/32" - 32 x 15/32" long. Keyed shank, hex nut and finishing nut furnished. 6 wire lead terminals, number 18, stripped 3/4". With end bell.
Jandorf 60202 All Purpose Adjustable Crossbar Kit Jandorf 60121 Detachable Lamp Harp Jandorf 60107 Tapped Bullet Finial
Crossbar for mounting light fixtures. Protects bulb from lamp shade and holds lamp shade in place. Secures lamp shade to harp.
NYLT NEON ORBS                Powerzone OR801124 Power Outlet Strip Cooper 827 Duplex Receptacle
NYLT NEON ORBS
Our Price: $4.33
Night time lighting solution. Automatically turns on in low light with enough light to see by without being obtrusive. 3000K warm illumination. Straight plug, converts one outlet into six with built-in circuit breaker switches to prevent overloads. Rated 15 amp, 125 volt, 1875 watts. UL listed. Carded. Meets all UL 498 requirements. Triple wipe line contacts for long-term plug retention. Double wipe ground contacts for ground retention. 0.50" thick steel wrap-around mounting strap galvanized for corrosion resistance. Easy access split circuit break-off tab (except dual voltage). Side wire terminals accept up to #10 solid or stranded wire. Terminal screws backed out; ready for wiring. Combination slot/Phillips head mounting and terminal screws.
Cooper 827 Duplex Receptacle Cooper 827 Duplex Receptacle GB-Gardner Bender GSW-24 Canopy Switches
Meets all UL 498 requirements. Triple wipe line contacts for long-term plug retention. Double wipe ground contacts for ground retention. 0.50" thick steel wrap-around mounting strap galvanized for corrosion resistance. Easy access split circuit break-off tab (except dual voltage). Side wire terminals accept up to #10 solid or stranded wire. Terminal screws backed out; ready for wiring. Combination slot/Phillips head mounting and terminal screws. Meets all UL 498 requirements. Triple wipe line contacts for long-term plug retention. Double wipe ground contacts for ground retention. 0.50" thick steel wrap-around mounting strap galvanized for corrosion resistance. Easy access split circuit break-off tab (except dual voltage). Side wire terminals accept up to #10 solid or stranded wire. Terminal screws backed out; ready for wiring. Combination slot/Phillips head mounting and terminal screws. Maintained contact switch family utilized in applications requiring continuous continuity contacts. Number 18 AWG, 6" stripped wire leads. Mounting nut included.
Cooper TWR270W Tamper Resistant Weatherproof Duplex Receptacle Cooper TWR270V Tamper Resistant Weatherproof Duplex Receptacle Jandorf 60122 Detachable Lamp Harp
Receptacle is residential grade, duplex, tamper resistant with a UL Listed shutter system and impact-resistant thermoplastic face and back body that is virtually unbreakable. The 2008 National Electrical Code (NEC) states that "Effective January 1, 2008, all receptacles installed in new dwelling units must be tamper-resistant." Features a wire stripper for #14 and #12 wire, extra long and wide mounting straps and tri-combo screws that accept slotted, Phillips and Robertson-head tools. Terminal screws are backed out and ready to wire. Side-wire terminals accept up to #10 solid or stranded wire. Push in terminals accept #14 solid wire. Screw-catch feature speeds wall plate installation. TR and WR designations provide visual identification. UL, cULus listed. 15 amp, 125 volt. Receptacle is residential grade, duplex, tamper resistant with a UL Listed shutter system and impact-resistant thermoplastic face and back body that is virtually unbreakable. The 2008 National Electrical Code (NEC) states that "Effective January 1, 2008, all receptacles installed in new dwelling units must be tamper-resistant." Features a wire stripper for #14 and #12 wire, extra long and wide mounting straps and tri-combo screws that accept slotted, Phillips and Robertson-head tools. Terminal screws are backed out and ready to wire. Side-wire terminals accept up to #10 solid or stranded wire. Push in terminals accept #14 solid wire. Screw-catch feature speeds wall plate installation. TR and WR designations provide visual identification. UL, cULus listed. 15 amp, 125 volt. Protects bulb from lamp shade and holds lamp shade in place.
Jandorf Acorn Finial Reducer With 1/8 M to 1/4-27 F Reducer NTLT MADISON LED A/O          Jandorf 60140 Lamp Check Ring
NTLT MADISON LED A/O
Our Price: $4.49
Secures lamp shade to harp. Contains one 1-1/2" acorn finial with a 1/8" M to 1/4-27 F reducer. Night time lighting solution. Automatically turns on in low light with enough light to see by without being obtrusive. 3000K warm illumination. Decorative highlight to cover opening. Contains 12 assorted check rings for 1/8" IP lamp nipples.
Powerzone OR801118 Power Outlet Strip NTLT ARCH LED CLR CHNG        Gardner Bender GSW-31 Pull Chain Switch
NTLT ARCH LED CLR CHNG
Our Price: $4.60
Straight plug, converts one outlet into six with built-in circuit breaker switches to prevent overloads. Rated 15 amp, 125 volt, 1875 watts. UL listed. Carded. Always on, 1 lumen of light as it cycles through all of the colors in the rainbow. Adds lively color to any room. 3.9" H x 1.7" W x 1.1" (w/o plug). 120V 60Hz, 0.5W. Mounts in 13/32" diameter hole. Two position, 2 wire. (GSW-35 mounts in 1/2" diameter hole). number 18 AWG, 6" stripped wire leads.
Jandorf 60123 Detachable Lamp Harp GB-Gardner Bender GSW-25 Canopy Switches Cooper 877 Grounded Duplex Receptacle
Protects bulb from lamp shade and holds lamp shade in place. Maintained contact switch family utilized in applications requiring continuous continuity contacts. Number 18 AWG, 6" stripped wire leads. Mounting nut included. Meets all UL 498 requirements. Triple wipe line contacts for long-term plug retention. Double wipe ground contacts for ground retention. 0.50" thick steel wrap-around mounting strap galvanized for corrosion resistance. Easy access split circuit break-off tab (except dual voltage). Side wire terminals accept up to #10 solid or stranded wire. Terminal screws backed out; ready for wiring. Combination slot/Phillips head mounting and terminal screws.
Cooper 877 Grounded Duplex Receptacle Cooper 877 Grounded Duplex Receptacle Jandorf 60124 Detachable Lamp Harp
Meets all UL 498 requirements. Triple wipe line contacts for long-term plug retention. Double wipe ground contacts for ground retention. 0.50" thick steel wrap-around mounting strap galvanized for corrosion resistance. Easy access split circuit break-off tab (except dual voltage). Side wire terminals accept up to #10 solid or stranded wire. Terminal screws backed out; ready for wiring. Combination slot/Phillips head mounting and terminal screws. Meets all UL 498 requirements. Triple wipe line contacts for long-term plug retention. Double wipe ground contacts for ground retention. 0.50" thick steel wrap-around mounting strap galvanized for corrosion resistance. Easy access split circuit break-off tab (except dual voltage). Side wire terminals accept up to #10 solid or stranded wire. Terminal screws backed out; ready for wiring. Combination slot/Phillips head mounting and terminal screws. Protects bulb from lamp shade and holds lamp shade in place.
Cooper A12 869-BOX  Duplex Receptacle Aspire 9505 Duplex Recessed Tamper Resistant Electrical Receptacle Aspire 9505 Duplex Recessed Tamper Resistant Electrical Receptacle
Commercial specification grade straight blade receptacle on 4" galvanized steel cover. Back and side wire. 15 amp 125 volt. 5-15R NEMA. Temperature rating of -20 to 60 degrees C. UL Listed, meets all CSA requirements, NOM Certified. Receptacle is residential grade, duplex, tamper resistant with a UL Listed shutter system and impact-resistant thermoplastic face and back body that is virtually unbreakable. An oversized strap provides a solid base for mounting and virtually eliminates "floating" installations. Thermoplastic construction ultrasonically welded top and backbody; extra-long, extra-wide mounting straps; number 12 and number 14 push-in terminals; backwire clamps on side terminals; easy-access ground screws; built-in wire strippers. Meets all UL 498 requirements, (file no. E15058); CSA Certified, C22.2 no. 42 (file no. 6914 (6233-01); NOM Certified. Flammability rating: V2 per UL 94. temperature rating: -40 degrees C to 65 degrees C. TR designations provides visual identification. UL, cULus Listed. 15 amp, 125 volt. Receptacle is residential grade, duplex, tamper resistant with a UL Listed shutter system and impact-resistant thermoplastic face and back body that is virtually unbreakable. An oversized strap provides a solid base for mounting and virtually eliminates "floating" installations. Thermoplastic construction ultrasonically welded top and backbody; extra-long, extra-wide mounting straps; number 12 and number 14 push-in terminals; backwire clamps on side terminals; easy-access ground screws; built-in wire strippers. Meets all UL 498 requirements, (file no. E15058); CSA Certified, C22.2 no. 42 (file no. 6914 (6233-01); NOM Certified. Flammability rating: V2 per UL 94. temperature rating: -40 degrees C to 65 degrees C. TR designations provides visual identification. UL, cULus Listed. 15 amp, 125 volt.
RECEPT DUPLEX RB 15A 125V 2P3W Jandorf 60125 Detachable Lamp Harp Jandorf 60236 Screw Collar Loop
Receptacle is tamper resistant with a UL Listed shutter system and impact-resistant thermoplastic face and back body that is virtually unbreakable. The 2008 National Electrical Code (NEC) states that "Effective January 1, 2008, all receptacles installed in new dwelling units must be tamper-resistant." Features a wire stripper for number 14 and number 12 wire, extra long and wide mounting straps and tri-combo screws that accept slotted, Phillips and Robertson-head tools. Terminal screws are backed out and ready to wire. Side-wire terminals accept up to number 10 solid or stranded wire. Push in terminals accept number 14 solid wire. Screw-catch feature speeds wall plate installation. 15 amp, 125 volt. NEMA 5-15R. UL, cULus Listed. Protects bulb from lamp shade and holds lamp shade in place. Decorative loop that secures 1 1/16" center hole canopy. 1/4 IP.
Jandorf 60112 Tapped Ball Finial Jandorf 60324 Beaded Chain With NO 6 Connector Jandorf 60352 Beaded Chain With NO 6 Connector
Secures lamp shade to harp. With connector. With connector.
Jandorf 60206 Loop Crossbar Kit Jandorf 60220 Ceiling Blank-Up Kit Jandorf 60371 Beaded Chain With NO 6 Connector
Crossbar for mounting light fixtures. Decorative piece used to cover the outlet box after removal of an existing fixture. With connector.
Jandorf 60373 Beaded Chain With NO 6 Connector Jandorf 60377 Beaded Chain With NO 6 Connector Jandorf 60136 Lamp Cord
With connector. With connector. With polarized plug. 18 gauge.
Jandorf 61224 Single Circuit Push Button Switch Cooper C1507V Grounded Standard Duplex Receptacle Cooper C1507W Grounded Standard Duplex Receptacle
Jandorf Push Button Switch, Single Circuit, Series: 61224, 125 V, 1 A, 1 Poles, Contact Configuration: SPST, On/Off, 2-Wire Terminal, Brass, UL Listed, Brass Canopy With No. 1107 wall plate. UL Listed. 15 amp, 125 volt, grounded. Carded. With No. 1107 wall plate. UL Listed. 15 amp, 125 volt, grounded. Carded.
NTLT TRANSLCNT SCREEN LED A/O Jandorf Acorn Finial Reducer With 1/8 M to 1/4-27 F Reducer Jandorf 60211 Ceiling Canopy Kit
Night time lighting solution. Automatically turns on in low light with enough light to see by without being obtrusive. 3000K warm illumination. Secures lamp shade to harp. Contains one 1-1/2" acorn finial with a 1/8" M to 1/4-27 F reducer. Used to cover the outlet box and hang ceiling fixture. 5".
GB-Gardner Bender GSW-22 Momentary Switches Arrow Hart TR Duplex Receptacle Arrow Hart TR Duplex Receptacle
Basic pushbutton screw type terminal switch family utilized in applications requiring intermittent continuity contacts. Mounts in standard 1/2" diameter hole. Mounting nut included. () Indicates momentary action. High impact-resistant thermoplastic face. Triple wipe line contacts for long-term plug retention. Double wipe ground contacts for ground retention. .050" thick steel wrap-around mounting strap zinc-plated for corrosion resistance. Easy access split circuit break-off tab. Automatic grounding system eliminates need for bonding jumper in grounded metal enclosure. Back and side wire terminals accept #14, #12 and #10 solid or stranded wire. Terminal screws backed out. Combination slot/Phillips head mounting and terminal screws. Meets all UL 498 requirements. Federal Specifications WC-596. UL Listed. Tamper resistant receptacles have a UL Listed shutter system. High impact-resistant thermoplastic face. Triple wipe line contacts for long-term plug retention. Double wipe ground contacts for ground retention. .050" thick steel wrap-around mounting strap zinc-plated for corrosion resistance. Easy access split circuit break-off tab. Automatic grounding system eliminates need for bonding jumper in grounded metal enclosure. Back and side wire terminals accept #14, #12 and #10 solid or stranded wire. Terminal screws backed out. Combination slot/Phillips head mounting and terminal screws. Meets all UL 498 requirements. Federal Specifications WC-596. UL Listed. Tamper resistant receptacles have a UL Listed shutter system.
Cooper 270V10 Grounded  Duplex Receptacle Cooper 270W Grounded  Duplex Receptacle Jandorf 60118 Lamp Shade Riser
Built-in wire stripper for number 14 wire. Built-in wire looper for pre-looping conductors. Screw-catch feature eliminates need to hand-thread screw and possible cross-threading. Double wipe ground contacts. Split circuit break-off tab. Side wire terminals accept up to number 10 solid or stranded wire. Push-in terminals accept number 14 solid wire only. 15 amp/125 volt. UL Listed, NOM certified, meets CSA requirements. Built-in wire stripper for number 14 wire. Built-in wire looper for pre-looping conductors. Screw-catch feature eliminates need to hand-thread screw and possible cross-threading. Double wipe ground contacts. Split circuit break-off tab. Side wire terminals accept up to number 10 solid or stranded wire. Push-in terminals accept number 14 solid wire only. 15 amp/125 volt. UL Listed, NOM certified, meets CSA requirements. Raises lamp shade. 1/4-27 thread.
GB-Gardner Bender GSW-21 Canopy Switches Jandorf 60119 Lamp Shade Riser NTLT TIPI LED MNUL FROST LENS
Maintained pushbutton switch. Push On-Push Off. #18 AWG, 6' stripped wire leads. Mounting nut included. Raises lamp shade. 1/4-27 thread. Turns on with a switch and gives off 1 lumen of illumination through a frosted lens, enough to see by without being obtrusive. Great for bedrooms, hallways, entryways, basements, bathrooms and more. Designed with a modern style that works with any decor.
Gardner Bender GSW-23 Push Button Switch NTLT COSMOPOLITAN LED A/O NKL Jandorf 60165 Lamp Pipe
Basic pushbutton screw type terminal switch family utilized in applications requiring intermittent continuity contacts. Mounts in standard 1/2" diameter hole. Mounting nut included. () Indicates momentary action. Night time lighting solution. Automatically turns on in low light with enough light to see by without being obtrusive. 3000K warm illumination. For repairing or making lighting fixtures and lamps.
Arrow Hart TRBR20W-BXSP Tamper Resistant Duplex Receptacle Arrow Hart TRBR20V-BXSP Tamper Resistant Duplex Receptacle Arrow Hart Arrow Link 5252  Duplex Receptacle
High impact-resistant thermoplastic face. Triple wipe line contacts for long-term plug retention. Double wipe ground contacts for ground retention. .050" thick steel wrap-around mounting strap zinc-plated for corrosion resistance. Easy access split circuit break-off tab. Automatic grounding system eliminates need for bonding jumper in grounded metal enclosure. Back and side wire terminals accept #14, #12 and #10 solid or stranded wire. Terminal screws backed out. Combination slot/Phillips head mounting and terminal screws. Meets all UL 498 requirements. Federal Specifications WC-596. UL Listed. Tamper resistant receptacles have a UL Listed shutter system. High impact-resistant thermoplastic face. Triple wipe line contacts for long-term plug retention. Double wipe ground contacts for ground retention. .050" thick steel wrap-around mounting strap zinc-plated for corrosion resistance. Easy access split circuit break-off tab. Automatic grounding system eliminates need for bonding jumper in grounded metal enclosure. Back and side wire terminals accept #14, #12 and #10 solid or stranded wire. Terminal screws backed out. Combination slot/Phillips head mounting and terminal screws. Meets all UL 498 requirements. Federal Specifications WC-596. UL Listed. Tamper resistant receptacles have a UL Listed shutter system. High impact and chemical-resistant nylon face. Rigid glass reinforced nylon base. Automatic grounding system eliminates need for bonding jumper in grounded metal enclosure. Long, broad mounting strap. Meets all UL 498 requirements UL Listed. Screw-catch feature speeds mounting of wall plates. Combination slot/Phillips/Robertson terminal and mounting screws. 5-leaf solid brass line contacts for lowest heat rise, smooth plug blade insertion and long term retention.
Jandorf 60134 Lamp Cord Jandorf 60135 Lamp Cord NTLT ARIA LED A/O FROST LENS
With polarized plug. 18 gauge. With polarized plug. 18 gauge. Night time lighting solution. Automatically turns on in low light with enough light to see by without being obtrusive. 3000K warm illumination.
Mintcraft OR922009 Multiple Outlet Strip Jandorf 60127 Detachable Lamp Harp Mr Heater 20381 Burner Head
Right angle plug. 3 ft power cord. 15A/125V/1875W. Protects bulb from lamp shade and holds lamp shade in place. For use with indoor gaslights. Replaces broken burner head or can be used with soft mantle F220353 and gasket 20339 to convert light from pre-formed mantle to soft mantle.
Powerzone OR802013 Surge Protector Strip Cooper TWRBR15V Tamper Resistant Weatherproof Duplex Receptacle Cooper TWRBR15W-BXSP Tamper Resistant Weatherproof Duplex Receptacle
Household use surge protector. Straight plug. Full, 3-line protection against surges through hot, neutral or ground lines, built-in circuit breaker switches to protect against overloads. Superior joule ratings and clamping voltage ratings. Rated 400 joule, 15 amp, 125 volt, 1875 watts. UL listed. Carded. Tamper and weather resistant commercial grade duplex receptacle with a UL Listed shutter system, back and side wiring. -4 to 158 degrees F temperature rating. Withstands 2000 volts per UL498. Body is thermoplastic nylon, the strap and terminal clamps are nickel plated steel. The contacts are a brass alloy. UL Listed to UL498, UL Certified to CSA C22.2, no. 42, UL verified to Fed. Spec. WC-596G, and NOM/ANSI Certified. Meets UL 94 flammability requirements; V2 rated. TR and WR designations provide visual identification. UL, cULus Listed. Tamper and weather resistant commercial grade duplex receptacle with a UL Listed shutter system, back and side wiring. -4 to 158 degrees F temperature rating. Withstands 2000 volts per UL498. Body is thermoplastic nylon, the strap and terminal clamps are nickel plated steel. The contacts are a brass alloy. UL Listed to UL498, UL Certified to CSA C22.2, no. 42, UL verified to Fed. Spec. WC-596G, and NOM/ANSI Certified. Meets UL 94 flammability requirements; V2 rated. TR and WR designations provide visual identification. UL, cULus Listed.
NTLT OLAA LED A/O NKL         Jandorf 60138 Lamp Socket/Switch Jandorf 60218 Ceiling Blank-Up Kit
NTLT OLAA LED A/O NKL
Our Price: $6.80
Night time lighting solution. Automatically turns on in low light with enough light to see by without being obtrusive. 3000K warm illumination. Lights up crafts and ceramic houses. 6' SPT-1 lamp cord, 18 gauge with on/off switch, candelabra base, clip-in socket and polarized plug. 75 watts maximum. Decorative piece used to cover the outlet box after removal of an existing fixture.
Jandorf 60128 Detachable Lamp Harp Jandorf 61028 Plunger Single Circuit Push Button Switch NTLT MODO LED A/O NKL
NTLT MODO LED A/O NKL
Our Price: $7.05
Protects bulb from lamp shade and holds lamp shade in place. Jandorf Push Button Switch, Plunger Single Circuit, Series: 61028, 125 V, 2 A, 1 Poles, Contact Configuration: SPST, Normally OFF, Momentary Snap Operation, Round Shape, 2-Tab Terminal, UL Listed Night time lighting solution. Automatically turns on in low light with enough light to see by without being obtrusive. 3000K warm illumination.
Jandorf 60214 Ceiling Canopy Kit Jandorf 60215 Ceiling Canopy Kit Jandorf 60216 Ceiling Canopy Kit
Used to cover the outlet box and hang ceiling fixture. 5". Used to cover the outlet box and hang ceiling fixture. 5". Used to cover the outlet box and hang ceiling fixture. 5".
Jandorf 60133 Lamp Cord Jandorf 61212 Single Circuit Push Button Switch Cooper 542B-BOX Duplex Receptacle
With polarized plug. 18 gauge. Jandorf Push Button Switch, Single Circuit, Series: 61212, 125 V, 3 A, 1 Poles, Contact Configuration: SPST, On/Off, NIC Operation, 2-Wire Terminal, Nickel Plated, UL Listed NEMA 5-15R. For pole barns. 15 amp, 125 volt.
Jandorf 60212 Ceiling Canopy Kit American Tack 6009B Incandescent Dimm Cooper TWRBR20V Tamper Resistant Weatherproof Duplex Receptacle
Used to cover the outlet box and hang ceiling fixture. 5". Converts any lamp to full range dimming. Range from night light to full brightness. Eliminates the need for expensive 3-way bulbs. Compact size fits most lighting fixtures. Screws in, no wiring required. Works with incandescent bulbs and many dimmable LED bulbs. Manual dimmer. 100 watts maximum. Plastic housing. 2.5" x 2.08" x 1.96". Tamper and weather resistant commercial grade duplex receptacle with a UL Listed shutter system, back and side wiring. -4 to 158 degrees F temperature rating. Withstands 2000 volts per UL498. Body is thermoplastic nylon, the strap and terminal clamps are nickel plated steel. The contacts are a brass alloy. UL Listed to UL498, UL Certified to CSA C22.2, no. 42, UL verified to Fed. Spec. WC-596G, and NOM/ANSI Certified. Meets UL 94 flammability requirements; V2 rated. TR and WR designations provide visual identification. UL, cULus Listed.
Cooper TWRBR20W-BXSP Tamper Resistant Weatherproof Duplex Receptacle TAP SURGE 5-OUT 900J WHT/GRAY Jandorf 61306 Double Circuit Push Button Switch
Tamper and weather resistant commercial grade duplex receptacle with a UL Listed shutter system, back and side wiring. -4 to 158 degrees F temperature rating. Withstands 2000 volts per UL498. Body is thermoplastic nylon, the strap and terminal clamps are nickel plated steel. The contacts are a brass alloy. UL Listed to UL498, UL Certified to CSA C22.2, no. 42, UL verified to Fed. Spec. WC-596G, and NOM/ANSI Certified. Meets UL 94 flammability requirements; V2 rated. TR and WR designations provide visual identification. UL, cULus Listed. Tap surge 5-outlets, protected and grounded indicator lights, 2 wide-spaced outlets for transformer plug. Jandorf Push Button Switch, Double Circuit, Series: 61306, 120 V, 3 A, 1 Poles, Contact Configuration: SPST, Normally Off, Momentary Operation, 2-Screw Terminal, UL Listed, Black Canopy
SURGE APPL 1080J 1-OUTLET GRY Powerzone OR802105 Surge Protector Tap Jandorf 60219 Ceiling Blank-Up Kit
Protects appliances from power surges. When the unit is no longer protecting, it will sound an alarm. 1080 Joules, 15 Amp/120 VAC. 60 Hz, 1800 watts. Max surge: 6000V, max spike: 45000A, response: <1ns. LED indicator, overload protection. Indoor use only. Tri-lingual package, (English/French/Spanish). cULus Listed. Single outlet, 900 joule surge tap, white. Rated 15 amp, 125 volt and 1875 watts. Built-in circuit breaker to protect against overloads. Protected and grounded indicator lights. Decorative piece used to cover the outlet box after removal of an existing fixture.
Jandorf 61029 Plunger Single Circuit Push Button Switch Jandorf 60217 Ceiling Canopy Kit NTLT GLOW PANEL 2CLR
NTLT GLOW PANEL 2CLR
Our Price: $8.32
Jandorf Push Button Switch, Plunger Single Circuit, Series: 61029, 125 V, 0.75 A, 1 Poles, Contact Configuration: SPST, Normally On, Momentary Operation, Round Shape, 2-Tab Terminal, UL Listed Used to cover the outlet box and hang ceiling fixture. 5". Two color modes, blue and magenta, which can be controlled by a switch on its side. Small, compact housing. Always on, 1 lumen of light. 3.35" H x 2.75" W x 0.5" (w/o plug). 120V, 60Hz, 1W.
Jandorf 61221 Single Circuit Push Button Switch Jandorf 60213 Ceiling Canopy Kit Mintcraft OR802124 Surge Protector
Jandorf Push Button Switch, Single Circuit, Series: 61221, 125 V, 1.5 A, 1 Poles, Contact Configuration: SPST, Normally Off, Momentary Operation, 2-Wire Terminal, UL Listed, For Industrial Controlling Circuits Used to cover the outlet box and hang ceiling fixture. 5". Straight plug. Outlet safety covers. 3 foot power cord. 15A/125V/1875W.
Powerzone OR7000X2 Power Outlet Strip Cooper BP851BGE Night Light American Tack 6603BC Incand Dimmers
Power strip. 6 outlets 15 amp, 125 volt, 1875 watts. cULus Listed. Meets all UL 1786 requirements. Automatically turns on when it is dark and off when light. Molded of heat resistant plastic. Includes one 3,000 hour bulb. Lamp socket 3-Level dimmer. Converts any lamp with metal socket to a touch dimmer. Use regular bulb instead of 3-way bulb. Works with incandescent bulbs and many dimmable LED bulbs. 150 watts maximum. Plastic housing. 3.4" x 2.4" x 2.4".
NTLT LED DIRECTIONAL A/O      Jandorf 61213 Double Circuit Push Button Switch Jandorf 61036 Single Circuit Push Button Switch
Night time lighting solution. Automatically turns on in low light with enough light to see by without being obtrusive. 3000K warm illumination. Jandorf Push Button Switch, Double Circuit, Series: 61213, 125 V, 3 A, 1 Poles, 4 Positions, Contact Configuration: 3-Way, Off/On/On/On, 3-Wire Terminal, Brass, UL Listed, L1/L2/L1-2/Off, For Commercial and Industrial Jandorf Push Button Switch, Single Circuit, Series: 61036, 125 V, 5 A, 1 Poles, Contact Configuration: SPST, On/Off, 2-Wire Terminal, Nickel Plated, UL Listed