Home > ELECTRICAL > HOUSEHOLD ELECTRICAL > EXTENSION CORDS > OUTDOOR EXTENSION CORDS
Sort By:
1
Despard K1I 1-Hole Standard Wall Plate Despard K3I 3-Hole Standard Wall Plate Despard K2I 2-Hole Standard Wall Plate
Switch plate with horizontal one opening, two opening and three opening sizes. Older style device with a rounded shape that is slightly flattened top and bottom. Interchangeable, supplied with mounting straps. Flexible, smaller than a standard duplex receptacle device, fits in a smaller opening. Used in locations with limited space or restricted options. Openings are 11/16" high x 29/32" wide. UL Listed, CSA Certified. Switch plate with horizontal one opening, two opening and three opening sizes. Older style device with a rounded shape that is slightly flattened top and bottom. Interchangeable, supplied with mounting straps. Flexible, smaller than a standard duplex receptacle device, fits in a smaller opening. Used in locations with limited space or restricted options. Openings are 11/16" high x 29/32" wide. UL Listed, CSA Certified. Switch plate with horizontal one opening, two opening and three opening sizes. Older style device with a rounded shape that is slightly flattened top and bottom. Interchangeable, supplied with mounting straps. Flexible, smaller than a standard duplex receptacle device, fits in a smaller opening. Used in locations with limited space or restricted options. Openings are 11/16" high x 29/32" wide. UL Listed, CSA Certified.
Cooper RKRD-W-BP Replacement Knob Cooper RKRD-V-BP Replacement Knob Lutron Preset/Slide-to-Off Standard Replacement Knob
CULus Listed, NOM certified. CULus Listed, NOM certified. Replacement knob for Skylark dimmers.
Lutron Replacement Knob Arrow Hart 732-BOX Weatherproof Lampholder LOCK CORD S TYPE PLASTIC YEL
Replacement knob for Skylark dimmers. Insulation displacement terminals for standard wire. Lay-in wire channel, 1/4" turn twist top speeds installation. One piece terminals and contacts.  Wire range 18 to 12. Sockets are made of heat-resistant phenolic. Hook mounting. 660 watts. 250 volt. Meets all UL 496 requirements. Locking system for keeping extension cord plug connections in place. S shape, constructed of heavy-duty plastic.
Lutron Electronics RK-WH Replacement Knobs Lutron RK-IV Standard Replacement Knob Westinghouse 7077000 Swag Hook Kit
Replacement knob for Rotary dimmers. Replacement knob for Rotary dimmers. Includes two each: 1-1/2" hooks, spring toggle wings, running thread studs, and wood screw bolts. Supports up to 30 pounds.
WINDER CORD PLASTIC BLACK     Westinghouse 7045200 Swag Hook Westinghouse 7045000 Swag Hook Kit
H-frame styled winder, with a leverage grip for easy winding. Holds up to 150 feet of 16/AWG cord. Includes two each: 1-1/2" hooks, spring toggle wings, running thread studs, and wood screw bolts. Supports up to 30 pounds. Includes two each: 1-1/2" hooks, spring toggle wings, running thread studs, and wood screw bolts. Supports up to 30 pounds.
Westinghouse 7045100 Swag Hook Kit Cooper BP942 Push Thru Interior Lampholder Jandorf 60470 Lamp Socket With 1-11/16 in Hickey
Includes two each: 1-1/2" hooks, spring toggle wings, running thread studs, and wood screw bolts. Supports up to 30 pounds. Molded of heat and impact resistant urea. 660 watts, 250 volts. Fits catalog numbers 940, 941 and 485. Interiors UL component recognized. Molded of thermoset plastic. 75 watts, 125 volts.
Jandorf 60471 Lamp Socket With 3-13/16 in Double Leg Hickey Jandorf 60472 Lamp Socket With 2-15/16 in Double Leg Hickey AmerTac 935TAL Wall Plate
Molded of thermoset plastic. 75 watts, 125 volts. Molded of thermoset plastic. 75 watts, 125 volts. With screws. 5" height x 2-3/4" width x 1/4" depth.
AmerTac 935TW Rectangular Wall Plate Cooper 3925-BOX Interior Lampholder Arrow Hart 968-BOX Keyless Fixture Socket
With screws. 5" height x 2-3/4" width x 1/4" depth. Molded of heat and impact resistant urea. 250 watt, 250 volt. Interiors UL component recognized. Fits catalog number 925. Screw terminals are backed out. Hickeys and nipples are threaded for mounting on standard fixture, 1 amp stems or brackets. 7/16" bracket height. 1-7/8" overall height. 660 watts, 250 volts. Meets all UL 496 requirements.
Cooper 2982-BOX Interior Lampholder Eagle 926-BOX 3-Way Turn Knob Lampholder Coleman 2803 H-Frame Extension Cord Caddy with Handle
Molded of heat and impact-resistant urea. 250 watts, 250 volts.  Aluminum, brass dipped finish. Fits catalog number 980. Interiors are UL component recognized. Medium base 250 watt 250 volt. Screw terminals are backed out ready for wiring. Interiors have removable turn knobs. 1/2" bracket height. 2-1/4" overall height. Temperature rating: -40 to 65 degrees C. UL Listed, CSA and NOM certified. Stores extension cords, trouble lights, coaxial cable, TV antenna wire, speaker wire, rope, holiday lights and much more. Heavier duty than most H-frame cord storage devices.  Built-in carry handle, one-piece construction, hole on side for wall mounting. Clip secures tail end of cord.
Jandorf 60537 Snap-In Lamp Socket With L Hickey Arrow Hart 145-BOX Weatherproof Pigtail Lampholder Arrow Hart S752WSP Keyless Cleat Socket
With 6", 18 awg wire leads. 660 watts, 250 volts. For use in electrical equipment, harnesses, light strings. Wire leads are 5", 14 gauge, color-coded and stranded wire, stripped 1". Rubber sockets have an extended lip to seal against bulb. Metal shell interiors are aluminum, nickel-plated copper. 660 watt. UL listed. For use with stage lighting and similar applications. One piece with front wire screw terminals. 660 watt 250 volt. Meets all UL 496 requirements.
Jandorf 60474 Lamp Socket With Double Leg Hickey Westinghouse 7067000 Oval Fixture Chain 3 ft Cooper BP940ABD Push Thru Metal Lampholder
Socket for candelabra base bulbs, with 1/8 IP hickey. Rated 75 watt-125 volt. Use only with #16 or #18 AWG stranded copper wire. Used to hang lighting fixtures, planters, shelving and wind chimes or as drapery tie backs. Caps threaded 1/8"-27 I.P.S. Fit standard lamp stems. Set screw prevents rotation of socket. Aluminum brass dipped finish. 660 watts, 250 volts. Temperature rating: -40 degrees C to 65 degrees C. UL Listed, file E7430, UL 496 requirements. NOM Certified.
Jandorf 60540 Snap-In Single Spring Lamp Socket Jandorf 60543 Snap-In Single Spring Lamp Socket With 3/4 in Wire Leads Atron 163TBR Square Corner Traditional Wall Plate
With 6", 18 awg wire leads. 660 watts, 250 volts. With 6", 18 awg wire leads. 660 watts, 250 volts. Traditional square corner design. With screws.
AmerTac 161T Wall Plate Powerzone OR501608 SJTW Round Extension Cord Jandorf 60538 Snap-In Lamp Socket
Traditional square corner design. With screws. 5" height x 2-7/8" width x 1/4" depth. Rated for 300 volt, grounded. Manufactured with copper conductors and solid molded plugs and two layers of insulation, one around each conductor and a second outer jacket that won't mark floors or walls and resists deterioration from moisture and abrasion. UL, cULus  Listed, meets OSHA specifications. Sleeved. With 6", 18 awg wire leads. 660 watts, 250 volts.
Jandorf 60539 Lamp Socket Gardner Bender GSW-32 Pull Chain Switch Jandorf 60541 Double Spring Clip Snap-In Lamp Socket
With 6", 18 awg wire leads. 660 watts, 250 volts. Mounts in 13/32" diameter hole. Two position, 2 wire. (GSW-35 mounts in 1/2" diameter hole). number 18 AWG, 6" stripped wire leads. With 6", 18 awg wire leads. 660 watts, 250 volts.
AmerTac 935TTW Wall Plate Jandorf 60473 Lamp Socket With 1-7/32 in Ring Arrow Hart BP968 Keyless Fixture Socket
With screws. 5" height x 4-5/8" width x 1/4" depth. Molded of thermoset plastic. 75 watts, 125 volts. Screw terminals are backed out. Hickeys and nipples are threaded for mounting on standard fixture, 1 amp stems or brackets. 7/16" bracket height. 1-7/8" overall height. 660 watts, 250 volts. Meets all UL 496 requirements.
Jandorf 60406 Keyless Lamp Socket Jandorf 60407 On/Off Push Through Lamp Socket Cooper 917ABD-BOX Turn Knob Lampholder
Fit standard lamp stems. Fit standard lamp stems. Caps threaded 1/8"-27 I.P.S. Fit standard lamp stems. Set screw prevents rotation of socket. 250 watts, 250 volts. Temperature rating: -40 to 149 degrees F. UL Listed, file E7430, UL 496 requirements. NOM Certified.
Cooper 925ABD-BOX 3-Way Turn Knob Lampholder GB-Gardner Bender GSW-39 Canopy Switches Cooper 1198-BOX Bottom Turn Knob Lampholder with Removable Knob
Caps threaded 1/8"-27 I.P.S. Fit standard lamp stems. Set screw prevents rotation of socket. 3-Way sockets operate dual filament lamps on sequence of low, medium high and off. Aluminum brass dipped finish. 250 watts, 250 volts. Temperature rating: -40 to 149 degrees F. UL Listed, file E7430, UL 496 requirements. NOM Certified. Momentary action. Variable speed and two-circuit brass plated pull chain switches for multifunction applications. Push-in connections for #18 AWG wire. Recommended mounting hole .406 diameter. 4 position 3 wire. Wire lead terminal type. Molded of thermoset plastic. Screw terminals are backed out. 1/8"-27 nipple. 11/16" bracket length, nickel finish.  660 watts, 250 volts. Meets all UL 496 requirements.
Cooper 940ABD-BOX 3-Way Push Thru Socket Jandorf 61202 Canopy Switch Jandorf 60475 Lamp Socket With Spring Clip
Caps threaded 1/8"-27 I.P.S. Fit standard lamp stems. Set screw prevents rotation of socket. Aluminum brass dipped finish. 660 watts, 250 volts. Temperature rating: -40 degrees C to 65 degrees C. UL Listed, file E7430, UL 496 requirements. NOM Certified. Jandorf Pull Chain Switch, 2-Speed, 125 V, 3 A, 1 Poles, 2 Circuits, Off/On/On, 3-Push Terminal, Brass, Standards: UL Listed Molded of thermoset plastic. 75 watts, 125 volts.
Cooper LZR000212P Mini Track Light Connector Amerelle Century 1-Toggle Wall Plate Arrow Hart 609-BOX Keyless Lampholder
For joining two sections end-to-end. Amerelle Wall Plate, 1-Toggle, Series: Century, 4-15/16 in Length, 4-9/16 in Width, 1 Gangs, Stamped Steel, Brushed Nickel, Screw Mounting, Includes: Matching Screws, UL Listed High-strength insulator porcelain. Thermoset ring. 2 piece with 9" wire leads, medium base, keyless switch.
Cooper BP925ABD Lampholder Cooper 980ABD-BOX 3-Way Pull Chain Socket Westinghouse 7040700 Keyless Socket
Caps threaded 1/8"-27 I.P.S. Fit standard lamp stems. Set screw prevents rotation of socket. 3-Way sockets operate dual filament lamps on sequence of low, medium high and off. Aluminum brass dipped finish. 250 watts, 250 volts. Temperature rating: -40 to 149 degrees F. UL Listed, file E7430, UL 496 requirements. NOM Certified. Caps threaded 1/8"-27 I.P.S. Fit standard lamp stems. Set screw prevents rotation of socket. 660 watts, 250 volts. Temperature rating: -40 degrees C to 65 degrees C. UL Listed, file E7430, UL 496 requirements. NOM Certified. Medium base. Threaded 1/8 hickey IP. 250 volts, 660 watts maximum. UL Listed.
Atron 163TTBR Traditional Wall Plate Diva D-600RH-DK Turn-To-On Rotary Dimmer Jandorf 60563 Lamp Socket
Traditional square corner design. With screws. 5" height x 4-3/4" width x 1/4" depth. Includes 2 changeable control knobs, one ivory and one white to match either color wall plate, (wall plate sold separately). Rotate to select light level, rotary on/off. Rated at 120 volt, 60Hz, works with 120 volt incandescents and halogens. 600 watt maximum capacity. UL/CSA Listed. Wire leads, 75 watts, 125 volts.
Jandorf 60535 On/Off Push Through Lamp Socket Jandorf 60530 On/Off Turn Knob Lamp Socket Diva Traditional D-600PH-DK Push-On Rotary Dimmer
Molded of thermoset plastic. Molded of thermoset plastic. Includes 2 changeable control knobs, one ivory and one white to match either color wall plate, (wall plate sold separately). Rotate to select light level, push on/off. 3-way dimmers require 3-way switches. Rated at 120 volt AC, 60Hz, works with 120 volt incandescents and halogens. 600 watt maximum capacity. UL and CSA Listed.
Jandorf 60400 Keyless Lamp Socket Jandorf 60401 On/Off Push Through Lamp Socket Jandorf 60408 On/Off Turn Knob Lamp Socket
Fit standard lamp stems. Fit standard lamp stems. Fit standard lamp stems.
Cooper BP145 Lampholder Arrow Hart 969-BOX Keyless Fixture Socket Cooper BP980ABD Push Thru Metal Lampholder
For use in electrical equipment, harnesses, light strings. Wire leads are 5", 14 gauge, color-coded and stranded wire, stripped 1". Rubber sockets have an extended lip to seal against bulb. Metal shell interiors are aluminum, nickel-plated copper. 660 watt. UL listed. Screw terminals are backed out. Hickeys and nipples are threaded for mounting on standard fixture, 0.44" bracket height, 1.88" overall height. 660 watt, 250 volt. Temperature rating of -40 to 65 degrees C. Interiors have removable turn knobs. Caps threaded 1/8"-27 I.P.S. Fit standard lamp stems. Set screw prevents rotation of socket. 660 watts, 250 volts. Temperature rating: -40 degrees C to 65 degrees C. UL Listed, file E7430, UL 496 requirements. NOM Certified.
Jandorf 60402 On/Off Turn Knob Lamp Socket Jandorf 60409 3-Way Turn Knob Lamp Socket Jandorf 61200 Canopy Switch
Fit standard lamp stems. Fit standard lamp stems. Jandorf Pull Chain Switch, 125 V, 3 A, 2 Poles, 4 Positions, 2 Circuits, Off/L1/L2/L1-2, 3-Wire Terminal, Brass, Standards: UL Listed
Jandorf 61208 Canopy Switch Cooper BP917ABD Lampholder Gardner Bender GSW-34 3-Speed Pull Chain Switch
Jandorf Pull Chain Switch, 125 V, 3 A, 1 Poles, 1 Circuits, On-Off, 2-Wire Terminal, Nickel, Standards: UL Listed Caps threaded 1/8"-27 I.P.S. Fit standard lamp stems. Set screw prevents rotation of socket. 250 watts, 250 volts. Temperature rating: -40 to 149 degrees F. UL Listed, file E7430, UL 496 requirements. NOM Certified. Variable speed and two-circuit brass plated pull chain switches for multifunction applications. Push-in connections for #18 AWG wire. Mounts in 13/32" diameter hole.
Jandorf 60410 On/Off Pull Chain Lamp Socket Atron 161TT Traditional Wall Plate Jandorf 60545 On/Off Turn Knob Lamp Socket
Fit standard lamp stems. Traditional square corner design. With screws. 5" height x 4-3/4" width x 1/4" depth. Molded of thermoset plastic.
Jandorf 60403 3-Way Turn Knob Lamp Socket Cooper BP1198 Bottom Turn Knob Lampholder Amerelle 1-Toggle Wall Plate
Fit standard lamp stems. Molded of thermoset plastic. Screw terminals are backed out. 1/8"-27 nipple. 11/16" bracket length, nickel finish.  660 watts, 250 volts. Meets all UL 496 requirements. Amerelle Wall Plate, 1-Toggle, Series: Contemporary, 5-1/4 in Length, 3 in Width, 1 Gangs, Oak Wood, Light, Screw Mounting, Includes: Matching Screws, UL Listed
Core React RI061-VW-K2 Non-Preset Rotary Dimmer Jandorf 60582 3-Way Keyless Lamp Socket AmerTac 935TTAL Wall Plate
For both residential and commercial use. Stylized knob provides dimming, on/off control and indication of light level setting. 6" prestripped wire leads. Ground lead provided. Wraparound heat sink dissipates heat and does not require de-rating. 120 volt AC, 60 Hz. UL Listed. Jandorf Lamp Socket, Keyless, Series: 60582, 660 W Lamp, 250 V, Medium Base, Porcelain, Ivory, Matte, UL Listed, For Light Commercial and Residential Applications? With screws. 5" height x 4-5/8" width x 1/4" depth.
Jandorf 60518 Lampholder Fixture Socket Jandorf 60229 Keyless Replacement Lamp Socket With 1/8 in IPT Hickey Jandorf 60533 3-Way Turn Knob Lamp Socket
Wire leads, 6" long. Socket for candelabra base bulbs, with 1/8 IP hickey. Rated 75 watt-125 volt. Use only with #16 or #18 AWG stranded copper wire. Molded of thermoset plastic.
Amerelle Century 2-Toggle Wall Plate Woods 0260 SJTW Extension Cord Jandorf 60565 Lamp Socket With 6 in Wire Leads
Amerelle Wall Plate, 2-Toggle, Series: Century, 4-15/16 in Length, 4-9/16 in Width, 2 Gangs, Stamped Steel, Brushed Nickel, Screw Mounting, Includes: Matching Screws, UL Listed Manufactured with stranded and cabled copper conductors and solid molded plugs for longer life. Outer jacket wont mark floors or walls. SJTW cords resist deterioration from moisture and abrasion. 300 volt wire rating. Sleeved. Wire leads, 75 watts, 125 volts.
Jandorf 60576 2-Piece Ring Keyless Fixture Socket Area Lighting CPGI-ALR-LC-120 Photocontrol Jandorf 60404 On/Off Pull Chain Lamp Socket
Jandorf Fixture Socket, 2-Piece Ring Keyless, Series: 60576, 660 W Lamp, 250 V, Medium Base, Screw Terminal, Porcelain, White, Matte, UL Listed, For Signs, Fixtures and Decorative Lighting Residential grade electrical component. Clear polycarbonate housing. Replacement photocontrol for Mercury Vapor and/or High-Pressure Sodium luminaires. 1,000 watts. Heavy-duty thermal bimetal switch. 30 - 45 second time delay. Fail mode is on. UL and CSA listed, ANSI C136.10 compliant. Fit standard lamp stems.
Jandorf 60536 On/Off Bottom Turn Knob Lamp Socket AmerTac Continental 94TBB Rectangular Wall Plate Amerelle Metro Line 1-Toggle Wall Plate
Molded of thermoset plastic. With screws. 5" height x 3" width x 1/4" depth. Amerelle Wall Plate, 1-Toggle, Series: Metro Line, 4-7/8 in Length, 3 in Width, 1 Gangs, Cast Metal, Brushed Nickel, Screw Mounting, Includes: Matching Screws, UL Listed
Powerzone OR501615 SJTW Round Extension Cord Amerelle Chelsea 1-Toggle Wall Plate Amerelle 1-Toggle Wall Plate
Rated for 300 volt, grounded. Manufactured with copper conductors and solid molded plugs and two layers of insulation, one around each conductor and a second outer jacket that won't mark floors or walls and resists deterioration from moisture and abrasion. UL, cULus  Listed, meets OSHA specifications. Sleeved. Amerelle Wall Plate, 1-Toggle, Series: Chelsea, 4-7/8 in Length, 3-1/8 in Width, 1 Gangs, Stamped Steel, Brushed Nickel, Screw Mounting, Includes: Matching Screws, UL Listed Amerelle Wall Plate, 1-Toggle, Series: Contemporary, 5-1/4 in Length, 3 in Width, 1 Gangs, Ash Wood, Unfinished, Screw Mounting, Includes: Matching Screws, UL Listed
Jandorf 60577 Lamp Socket With 8 in Wire Leads Amerelle 2-Toggle Wall Plate GB-Gardner Bender GSW-33 Canopy Switches
Jandorf Lamp Socket, Series: 60577, 660 W Lamp, 250 V, Medium Base, Porcelain, White, Matte, UL Listed, CSA Certified Amerelle Wall Plate, 2-Toggle, Series: Contemporary, 5-3/8 in Length, 5-7/8 in Width, 2 Gangs, Oak Wood, Light, Screw Mounting, Includes: Matching Screws, UL Listed Variable speed and two-circuit brass plated pull chain switches for multifunction applications. Push-in connections for #18 AWG wire. Mounts in 13/32" diameter hole.
Jandorf 60534 On/Off Pull Chain Lamp Socket Lutron D-603PH-DK Push-On/Off Rotary Dimmer Amerelle Chelsea 2-Toggle Wall Plate
Molded of thermoset plastic. Includes 2 changeable control knobs, one ivory and one white to match either color wall plate, (wall plate sold separately). Rotate to select light level, push on/off. 3-way dimmers require 3-way switches. Rated at 120 volt AC, 60Hz, works with 120 volt incandescents and halogens. 600 watt maximum capacity. UL and CSA Listed. Amerelle Wall Plate, 2-Toggle, Series: Chelsea, 4-7/8 in Length, 4-15/16 in Width, 2 Gangs, Stamped Steel, Brushed Nickel, Screw Mounting, Includes: Matching Screws, UL Listed
Amerelle 2-Toggle Wall Plate Area Lighting CPGI-ALR-AA-305 Post Security Photocontrol Jandorf 60228 Keyless Lamp Socket With 1/8 in IPT Hickey
Amerelle Wall Plate, 2-Toggle, Series: Contemporary, 5-3/8 in Length, 4-7/8 in Width, 2 Gangs, Ash Wood, Unfinished, Screw Mounting, Includes: Matching Screws, UL Listed Electrical components ultraviolet stabilized polycarbonate. For control of porch lights or outdoor floodlights. 300 watts, direct-wire. UL and CSA Listed. Socket for candelabra base bulbs, with 1/8 IP hickey. Rated 75 watt-125 volt. Use only with #16 or #18 AWG stranded copper wire.
Jandorf 60411 3-Way Pull Chain Lamp Socket Jandorf 60575 2-Piece Ring Fixture Socket Woods 0720 SJTW Outdoor Extension Cord
Fit standard lamp stems. Jandorf Fixture Socket, 2-Piece Ring, Series: 60575, 660 W Lamp, 250 V, Medium Base, Screw Terminal, Porcelain, Ivory, Matte, UL Listed, For Signs, Fixtures and Decorative Lighting Made of stranded and cabled copper conductors and solid molded plugs for longer life. Orange outer jacket won't mark floors or walls. Resists deterioration from moisture and abrasion and has a 300 volt rating. UL Listed. Sleeved.
AmerTac 758CTC-4 Dusk to Dawn Post Eye Light Control Jandorf 60579 Lamp Socket With Side Outlet Jandorf 60580 Lamp Socket With Single Bushing Strap
Hardwired photocell control, post eye control. Turns light on at dusk and off at dawn. Plastic housing. For incandescent, fluorescent, mercury vapor and sodium bulbs. Includes: 6" leads, 5/8" diameter. Maximum load tungsten: 15A, 1800 watts. Maximum load ballasted: 1100 VA, 9.1A. 2.95" x 2" x 1.7". Jandorf Lamp Socket, Series: 60579, 660 W Lamp, 600 V, Medium Base, Porcelain, White, Matte, UL Listed, CSA Certified Jandorf Lamp Socket, Series: 60580, 660 W Lamp, 600 V, Medium Base, Porcelain, White, Matte, UL Listed
Jandorf 60223 Twin Cluster Ceiling Fixture Kit Coleman 0863 SPT Power Tap Extension Cord Cooper RI306P-VW-K2 Preset Rotary Dimmer
Provides overhead lighting and supports reflector glass. Includes the canopy, two-bulb cluster socket with 18AWG pre-wired 8" insulated leads, rated 250 volts for use with 2 light bulbs, 50 watt maximum, 4" offset crossbar, two 8-32 x 1/2" mounting screws, two 1/8 IP rubber washers and a lock-up cap with brass finish. Solid molded power taps and three outlets in a compact design. Features solid molded plugs and stranded all-copper conductors. Made with tough vinyl insulation that won't mark walls or floors and resists deterioration from moisture and abrasion. 15 amp/125 volt. Sleeved. For both residential and commercial use. Stylized knob provides dimming, on/off control and indication of light level setting. 6" prestripped wire leads. Ground lead provided. Wraparound heat sink dissipates heat and does not require de-rating. 120 volt AC, 60 Hz. UL Listed.
Core React RI06P-VW-K2 Preset Rotary Dimmer Powerzone OR890708 3-Outlet Extension Cord Area Lighting CPGI-ALR-AA-105 Post Collar Photocontrol
For both residential and commercial use. Stylized knob provides dimming, on/off control and indication of light level setting. 6" prestripped wire leads. Ground lead provided. Wraparound heat sink dissipates heat and does not require de-rating. 120 volt AC, 60 Hz. UL Listed. Three weather resistant outlets. Electrical components and ultraviolet stabilized polycarbonate. For control of porch lights or outdoor floodlights. 1,800 watts, direct-wire. UL and CSA Listed.
GB-Gardner Bender GSW-35 Canopy Switches Area Lighting CPGI-ALR-LC-208-2 Thermal Bimetal Photocontrol Core React RI06PL-W-K Preset Rotary Dimmer
Mounts in 13/32" diameter hole. Two position, all angle, 2 wire, mounts in 1/2" diameter hole. #18 AWG, 6" stripped wire leads. Electrical components. Noryl housing. Replacement photocontrol for Mercury Vapor and/or High-Pressure Sodium luminaires. 1,000 watts. Heavy-duty thermal bimetal switch. 30 - 45 second time delay. Fail mode is on. 240 volt with a range of 185 - 305 volts. UL and CSA listed, ANSI C136.10 compliant. For both residential and commercial use. Stylized knob provides dimming, on/off control and indication of light level setting. 6" prestripped wire leads. Ground lead provided. Wraparound heat sink dissipates heat and does not require de-rating. 120 volt AC, 60 Hz. UL Listed.
Core Skye SI061-V-K Non-Preset Decorator Full Slide Dimmer Core Skye SI061-W-K Non-Preset Decorator Full Slide Dimmer Core React RI06PL-V-K Preset Rotary Dimmer
Full-slide dimmer 600 watt incandescent. Single pole, with no preset. 120/277 volt. UL and cUL Listed. Full-slide dimmer 600 watt incandescent. Single pole, with no preset. 120/277 volt. UL and cUL Listed. For both residential and commercial use. Stylized knob provides dimming, on/off control and indication of light level setting. 6" prestripped wire leads. Ground lead provided. Wraparound heat sink dissipates heat and does not require de-rating. 120 volt AC, 60 Hz. UL Listed.
Arrow Hart TR274 Duplex Combination Switch/Receptacle AmerTac 758M Post Eye Light Control Cord Wiz 3202 Extension Cord Holder 150 ft L Reel
Shutter designed to prevent the insertion of foreign objects. Neon pilot light which is on when switch is on. Switch is horsepower rated for motor loads per UL 20. Thermoplastic toggle, top and backbody. Ultrasonic welding and integrated construction of the strap and body. Tri-combo screw heads. Backwire clamps on side terminals for installation of #12 and #14 AWG wire. Single pole - 15 amp switch, 2-pole, 3-wire tamper resistant receptacle. UL listed, NEMA 5-15. Hardwired photocell control, post eye control. Turns light on at dusk and off at dawn. Plastic housing. For incandescent, fluorescent, LED, mercury vapor and sodium bulbs. 500 watt. Unit stores 150' of 16/3 extension cord neatly and conveniently, has a comfortable handle and ergonomic features for ease of handling.
Cooper TR274V Duplex Cooper TR274W Duplex RECEPTACLE/SWITCH COMBO LA
Shutter designed to prevent the insertion of foreign objects. Neon pilot light which is on when switch is on. Switch is horsepower rated for motor loads per UL 20. Thermoplastic toggle, top and backbody. Ultrasonic welding and integrated construction of the strap and body. Tri-combo screw heads. Backwire clamps on side terminals for installation of #12 and #14 AWG wire. Single pole - 15 amp switch, 2-pole, 3-wire tamper resistant receptacle. UL listed, NEMA 5-15. Shutter designed to prevent the insertion of foreign objects. Neon pilot light which is on when switch is on. Switch is horsepower rated for motor loads per UL 20. Thermoplastic toggle, top and backbody. Ultrasonic welding and integrated construction of the strap and body. Tri-combo screw heads. Backwire clamps on side terminals for installation of #12 and #14 AWG wire. Single pole - 15 amp switch, 2-pole, 3-wire tamper resistant receptacle. UL listed, NEMA 5-15. Shutter designed to prevent the insertion of foreign objects. Neon pilot light which is on when switch is on. Switch is horsepower rated for motor loads per UL 20. Thermoplastic toggle, top and backbody. Ultrasonic welding and integrated construction of the strap and body. Tri-combo screw heads. Backwire clamps on side terminals for installation of #12 and #14 AWG wire. Single pole - 15 amp switch, 2-pole, 3-wire tamper resistant receptacle. UL listed, NEMA 5-15.
Powerzone ORADL611802 SJTOW Pro Triple Tap Extension Cord Jandorf 60405 3-Way Pull Chain Lamp Socket AmerTac LC120BC-4 Dusk to Dawn Twist Lock Light Control
Contractor cord with lighted end. 15 amp/125 volt/1875 watts. Oil resistant, water resistant, flame retardant. Stays flexible down to -58 degrees Fahrenheit, stands up to 221 degrees Fahrenheit. UL, cULus Listed and CSA Certified. Meets OSHA requirements for outdoor use. Sleeved. Fit standard lamp stems. For mercury vapor, sodium and LED bulbs. Bi-metal switch with 3-prong twist lock plug. Plastic housing. Maximum load tungsten 8.3A, 1000 watts. Maximum load ballasted: 1800 VA, 15.0A. Outdoor, wire-in connection. 2.55" x 3.65" x 3.65".
Cooper LZR000200P Track Live-End Feed Lutron DNG600PH-DK Dim-N-Glo Rotary Dimmer Jandorf 60520 Lampholder Fixture Socket
With junction box cover. For starting a run at the beginning of track mounted to a junction box. For use with Lazer track only. Includes 2 changeable control knobs, one ivory and one white to match either color wall plate, (wall plate sold separately). Rotate to select light level, push on/off. Built-in soft glow night light visible in the dark for easy knob finding. 3 way dimmers require 3 way switches. Rated at 120 volt AC, 60Hz, works with 120 volt incandescents and halogens. 600 watt maximum capacity. UL and CSA Listed. Wire leads, 6" long.
Jandorf 60517 Lampholder Fixture Socket Amerelle Metro Line 2-Toggle Wall Plate AmerTac 758FPCTCC-4 Dawn Light Control
Wire leads, 6" long. Amerelle Wall Plate, 2-Toggle, Series: Metro Line, 4-3/4 in Length, 4-3/4 in Width, 2 Gangs, Cast Metal, Brushed Nickel, Screw Mounting, Includes: Matching Screws, UL Listed AmerTac Dawn Light Control, 1800 W, 15 A, Dusk On - Dawn OFF Timing Range, 1100 VA Ballast, Lighting Control Control, Wire-In Connection, 5.4 in Overall Height, 3.6 in Overall Width, 2.1 in Overall Depth, Plastic, Includes: Bi-Metal Switch, 3-Wire, Infrared Technology, For Outdoor, Incandescent, Fluorescent, mercury vapor and Sodium Bulbs
Cooper LZR000202P Laser Track Floating Canopy Feed Westek AT15BC-4 Dusk to Dawn Stem Mount Light Control Lutron DNG603PH-DK Push-On/Off Rotary Dimmer
Connect to an existing electrical box located anywhere along the track. Comes with canopy cover, connector, dead end and mounting hardware. Hardwired photocell control. Turns light on at dusk and off at dawn. Plastic housing. For incandescent, fluorescent, LED, mercury vapor and sodium bulbs. Includes: 6" leads, bi-metal switch and hardware for 1/2" pipe; 3-wire. Maximum load tungsten: 16.6A, 2000 watts. Maximum load ballasted: 1900 VA, 15.8A. 4.5" x 2.8" x 2.35". Includes 2 changeable control knobs, one ivory and one white to match either color wall plate, (wall plate sold separately). Rotate to select light level, push on/off. Built-in soft glow night light visible in the dark for easy knob finding. 3 way dimmers require 3 way switches. Rated at 120 volt AC, 60Hz, works with 120 volt incandescents and halogens. 600 watt maximum capacity. UL and CSA Listed.
Skylark S-600H-WH Preset Slide Dimmer Skylark S-600H-IV Preset Slide Dimmer Skylark S-600H-LA Preset Slide Dimmer
Select light level with slider. Lights turn off once slider reaches bottom. Power failure memory. RFI suppression. Wallplate not included. 120 volt, 60Hz. UL Listed. Carded. Select light level with slider. Lights turn off once slider reaches bottom. Power failure memory. RFI suppression. Wallplate not included. 120 volt, 60Hz. UL Listed. Carded. Select light level with slider. Lights turn off once slider reaches bottom. Power failure memory. RFI suppression. Wallplate not included. 120 volt, 60Hz. UL Listed. Carded.
Eco-Dim D-603PGH-DK Preset Rotary Dimmer with Pilot Light Area Lighting CPGI-ALR-SPT-15 Thermal Bimetal Photocontrol CORD EXTEN 3-TAP 8FT 16/3 GRN
Single pole/3-way dimmer with on/off switch. Provides energy savings. Push to turn lights on/off and rotate to adjust light level. Wallplate not included. 600 watt maximum. Carded. Polycarbonate housing, provides a 30-45 second time delay that virtually eliminates unwanted lamp cycling caused by lightning, car headlights, or other sudden changes in the ambient light level. The turn on level is pre-set at the factory, but an adjustable slide bar allows field adjustment to satisfy specific needs. Equipped with a swivel base to provide maximum installation flexibility. 120 volt, with a range of 105-130 volts, 2000 watts load rating tungsten, 1900 watts load rating ballast. Fail mode is on. UL and CSA Listed. Three weather resistant outlets.
Coleman 90218802 Plug Adapter Coleman 90208802 Plug Adapter Jandorf 60578 Bottom Turn Knob Lamp Socket
Converts a standard 15 amp grounded receptacle to a locking 20 amp. receptacle. Stranded copper conductors, bright yellow jacket and solid molded plugs for longer life. Not Yellow Jacket compound. Double-thick 600 volt insulation. UL Listed, meets OSHA specifications. Converts a Twist-To-Lock 20 amp receptacle to an outlet that accepts 15 amp male plugs. Stranded copper conductors, bright yellow jacket and solid molded plugs for longer life. Not Yellow Jacket compound. Double-thick 600 volt insulation. UL Listed, Meets OSHA Specifications. Jandorf Lamp Socket, Bottom Turn Knob, Series: 60578, 250 W Lamp, 250 V, Medium Base, Porcelain, White, Matte, UL Listed, CSA Certified
Area Lighting CPGI-ALR-TL-115 Swivel Mount Photocontrol Cooper LZR000203P Track Light L-Connector Glacier ORCW511615 Round Extension Cord
Electrical components ultraviolet stabilized polycarbonate. Thin-line outdoor control with swivel base. 1,800 watts. Fits between dual floodlights. UL and CSA Listed. To connect track sections at right angles or straight end-to-end. Includes straight and right angle covers. Indicator light in the female end connector shows when the power is on. Cord stays flexible down to -58 degrees, stands up to 140 degrees Fahrenheit. Water, flame and abrasion resistant. Molded-on plug and connector with heavy-duty strain relief. cULus listed. Blue. Sleeved.
Area Lighting CPGI-ALR-PT-15 Direct Wire Switch Photocell AmerTac SW103CTC-4 Dusk to Dawn Swivel Eye Light Control REEL CORD STORAGE PLASTIC BLK
For high wattage light fixtures up to 2,000 watts. Moveable control bar provides on-site adjustment for turn-on/off times. 120 volt, 50/60 Hz. UL and CSA Listed. For incandescent, fluorescent, LED, mercury vapor and sodium bulbs. Includes: 6" leads, 1/2" diameter neck and hardware, 3-wire. Plastic housing. 15 amp, 1800 watts maximum load tungsten. 1100 VA, 9.1 amp maximum load ballasted. Wire-in connection. 4.25" x 2.1" x 2.1". UL Listed. Plastic cord storage reel. ABS knob to reel in cord. Holds up to 100 feet of 16/AWG cord.
Powerzone OR501625 SJTW Round Extension Cord Yellow Jacket 2882 STW Power Block Adapter Cord Area Lighting CPGI-ALR-AA-105W Post Collar Photocontrol
Rated for 300 volt, grounded. Manufactured with copper conductors and solid molded plugs and two layers of insulation, one around each conductor and a second outer jacket that won't mark floors or walls and resists deterioration from moisture and abrasion. UL, cULus  Listed, meets OSHA specifications. Sleeved. Three outlet adapters with high gloss, extra durable, super flexible wire. Solid molded power block head stands up to heat, cold and rough use. 15 amp/125 volt insulated wire. Meets OSHA standards, UL Listed.  Yellow. Sleeved. Electrical components ultraviolet stabilized polycarbonate. For control of porch lights or outdoor floodlights. 1,800 watts. Black photo cell, brushed aluminum plate. UL and CSA Listed.
Core Trace TI061-V-K Non-Preset Toggle Dimmer REEL CORD STOR W/STND PLAS BLK Arrow Hart TR7730V Decorator Combination Switch/Receptacle
Provides smooth, positive motion for dimming and on/off control. CULus Listed, NOM Certified. 600 watt maximum. Carded. Handle driven plastic cord storage reel. Easy carry handle. With stand. Holds up to 100 feet of cord. Shutter designed to prevent the insertion of foreign objects. Switch is horsepower rated for motor loads per UL 20. Thermoplastic toggle, top and backbody. Ultrasonic welding and integrated construction of the strap and body. Tri-combo screw heads. Backwire clamps on side terminals for installation of #12 and #14 AWG wire. 15 amp 120V/AC switch, 15 amp 125V/AC TR receptacle. UL listed.
Arrow Hart TR7730W Decorator Combination Switch/Receptacle Woods 0261 SJTW Extension Cord Cooper RI306PL-W-K Preset Rotary Dimmer
Shutter designed to prevent the insertion of foreign objects. Switch is horsepower rated for motor loads per UL 20. Thermoplastic toggle, top and backbody. Ultrasonic welding and integrated construction of the strap and body. Tri-combo screw heads. Backwire clamps on side terminals for installation of #12 and #14 AWG wire. 15 amp 120V/AC switch, 15 amp 125V/AC TR receptacle. UL listed. Manufactured with stranded and cabled copper conductors and solid molded plugs for longer life. Outer jacket wont mark floors or walls. SJTW cords resist deterioration from moisture and abrasion. 300 volt wire rating. Sleeved. Provides smooth, positive motion for dimming and on/off control. Non-preset incandescent. UL Listed, NOM Certified. 600 watt maximum. Carded.
Cooper RI306PL-V-K Preset Rotary Dimmer Halo LZR102P Miniature Linear Laser Track Light System Powerzone ORAD50802 STW Extension Cord
Provides smooth, positive motion for dimming and on/off control. Non-preset incandescent. UL Listed, NOM Certified. 600 watt maximum. Carded. Overall height is 9/16" and the track has a decorative reveal at the ceiling line. It accepts both Lazer Track lampholders and Halo Power-Trac lampholders. Connectors push into the ends of the track. Solid molded 3 outlet plug. AWG 12/3 STW. For tools that use up to 15 amp/125 volt/1875 watts. Meets OSHA standards. UL, cULus Listed. Sleeved.
Cooper TI306-V-K Toggle Dimmer Cooper TI306-W-K Toggle Dimmer Lutron TG-600PH-WH Preset Toggle Dimmer
Easy to install. Toggle element provides smooth, positive motion for dimming and on/off control.  6" prestripped wire leads for fast, easy wiring. Ground lead provided. Wrap around heat sink dissipates heat and does not require de-rating. 600 watt maximum. UL Listed. Easy to install. Toggle element provides smooth, positive motion for dimming and on/off control.  6" prestripped wire leads for fast, easy wiring. Ground lead provided. Wrap around heat sink dissipates heat and does not require de-rating. 600 watt maximum. UL Listed. Select light level with toggle. Switch on/off at selected lighting level. Wallplate not included. 120 volt, 60 Hz. 600 watt maximum.
Lutron TG-600PH-IV Preset Toggle Dimmer Jandorf 60532 3-Way Pull Chain Lamp Socket Glacier ORCW511625 Round Extension Cord
Select light level with toggle. Switch on/off at selected lighting level. Wallplate not included. 120 volt, 60 Hz. 600 watt maximum. Molded of thermoset plastic. Indicator light in the female end connector shows when the power is on. Cord stays flexible down to -58 degrees, stands up to 140 degrees Fahrenheit. Water, flame and abrasion resistant. Molded-on plug and connector with heavy-duty strain relief. cULus listed. Blue. Sleeved.
Cooper LZR000208P Laser Track Light Cord/Plug WPLT DEVON BLACK STL 2TOGGLE  Woods 0722 SJTW Outdoor Extension Cord
Three wire 10' cord with grounded plug. Maximum capacity of 5 amps. With screws. 5" height x 4-5/8" width x 1/4" depth. Made of stranded and cabled copper conductors and solid molded plugs for longer life. Orange outer jacket won't mark floors or walls. Resists deterioration from moisture and abrasion and has a 300 volt rating. UL Listed. Sleeved.
WHEEL CORD W/METAL STAND BLACK Coleman 90848802 Twist Lock Cord Adapter Core Trace TI061-W-K Non-Preset Toggle Dimmer
Handle driven cord storage reel with metal stand. Holds up to 100 feet of 16/AWG cord. Indoor and outdoor locking 20 amp plug, NEMA L5-20P with lighted 15 amp NEMA 5-15R triple-tap receptacle. 12 gauge wire. Stranded conductors, bright yellow jacket and solid molded plugs. UL Listed. Provides smooth, positive motion for dimming and on/off control. CULus Listed, NOM Certified. 600 watt maximum. Carded.
Cooper EA24 Mounting Arm and Hardware Powerzone OR501630 SJTW Round Extension Cord CCI Tri-Source STW Extension Cord
Extends light fixtures 24". Works with Cooper Lighting's NH Series mercury vapor lights, G Series and No.E70H high pressure sodium light fixtures. Includes mounting arm and hardware. Rated for 300 volt, grounded. Manufactured with copper conductors and solid molded plugs and two layers of insulation, one around each conductor and a second outer jacket that won't mark floors or walls and resists deterioration from moisture and abrasion. UL, cULus  Listed, meets OSHA specifications. Sleeved. Solid molded 3 outlet plugs. For tools that use up to 15 amp. Meets OSHA standards. UL Listed.
Powerzone OR883628 SJTW Extension Cord Powerzone OR605627 SJTW Triple Tap Extension Cord Heathco HZ-5690-AL Light Fixture Arm Extension
Water resistant and flame retardant. Ultra flexible in temperatures down to -40 degrees F and stands up to +140 degrees F. Oversized plugs. Strain relief prevents wire from separating from the plugs. cULus Listed. Sleeved. Water resistant and flame retardant. Ultra flexible in temperatures down to -40 degrees F and stands up to +140 degrees F. Strain relief prevents wire from separating from the plug. 13 amp/125 volt/1625 watts. cULus Listed. Sleeved. Aluminum, for use with models 5650, 5653, 5656, 5660, and 5666. 1.625" depth x 24" length.
Jandorf 60260 Swag Kit Cooper Lighting LZR000301P Halo Track Lights Cooper TI306L-K Non-Preset Lighted Toggle Dimmer
Used for hanging a light fixture when there is no overhead electrical source. Contains one each 15' chain, 20' SPT-1 cord with polarized plug (18 gauge) and feed-through cord switch (3A 125V), and two each swag hooks, hanger bolts, threaded studs and spring toggle wings. White lampholder with baffle, compatible with all Halo Power-Trac systems for accent and display lighting applications where high coloring rendering and precise beam control are required. PAR20/30/38, MR16, BR30, R20/30, A19 lamp options. Matching arm allows lamp holder to rotate and adjust. Easy to install. Toggle element provides smooth, positive motion for dimming and on/off control. 6" prestripped wire leads for fast, easy wiring. Ground lead provided. Aluminum strap dissipates heat and does not require de-rating. Easily located in the dark. 600 watt maximum. UL Listed.
Jandorf 60262 Swag Kit Cooper Lighting LZR000104P Lazer Lighting Tracks Powerzone OR880628 SJTW Extension Cord
Used for hanging a light fixture when there is no overhead electrical source. Contains one each 15' chain, 20' SPT-1 cord with polarized plug (18 gauge) and feed-through cord switch (3A 125V), and two each swag hooks, hanger bolts, threaded studs and spring toggle wings. Overall height is 9/16" and the track has a decorative reveal at the ceiling line. It accepts both Lazer Track lampholders and Halo Power-Trac lampholders. Connectors push into the ends of the track. Meets OSHA specifications. UL, cULus Listed for outdoor use. 125 volts.
Powerzone OR884628 SJTW Extension Cord Heath Zenith HZ-5697 Dusk to Dawn Replacement Photo Control Twist Lock Cooper Lighting LZR000330P Halo Track Lights
Meets OSHA specifications. UL, cULus Listed for outdoor use. Beige, sleeved. For use with models 9270, 9272, 9274, 5650, 5653, 5656, 5660, and 5666. 3" diameter x 1.5" height. Designed for use with Halo Power-Track and Lazer-by-Halo track systems. Lamp: 75W PAR30 (Short neck lamp only). 4" width x 4-1/4" depth, maximum extension 7-15/16".
Cooper Lighting LZR000301P/W Halo Track Lights Cooper Lighting LZR000304P/W Halo Track Lights WPLT DEVON BLACK STEEL 1TOGGLE
White lampholder with baffle, compatible with all Halo Power-Trac systems for accent and display lighting applications where high coloring rendering and precise beam control are required. PAR20/30/38, MR16, BR30, R20/30, A19 lamp options. Matching arm allows lamp holder to rotate and adjust. For use with Halo, Power-Trac and Lazer-by-Halo track systems. Lamps supported include R, PAR, A and BR types. 4" width x 5-3/8 depth, maximum extension 8-1/4". With screws. 5" height x 2-3/4" width x 1/4" depth.
Jandorf 60261 Swag Kit Skylark S-600PH-LA Preset Slide Dimmer Skylark S-600PH-WH Preset Slide Dimmer
Used for hanging a light fixture when there is no overhead electrical source. Contains one each 15' chain, 20' SPT-1 cord with polarized plug (18 gauge) and feed-through cord switch (3A 125V), and two each swag hooks, hanger bolts, threaded studs and spring toggle wings. Select light level with slider. Switch on/off at selected light level. Uses standard 3-way wiring for easy, economical installation. Wallplate not included. 120 volt, 60Hz. 600 watt maximum. Carded. UL Listed. Select light level with slider. Switch on/off at selected light level. Uses standard 3-way wiring for easy, economical installation. Wallplate not included. 120 volt, 60Hz. 600 watt maximum. Carded. UL Listed.
Skylark S-600PH-IV Preset Slide Dimmer Skylark S-600PH-BL Preset Slide Dimmer Yellow Jacket 2886 SJTW Extension Cord With Powerlite Indicator Plug
Select light level with slider. Switch on/off at selected light level. Uses standard 3-way wiring for easy, economical installation. Wallplate not included. 120 volt, 60Hz. 600 watt maximum. Carded. UL Listed. Select light level with slider. Switch on/off at selected light level. Uses standard 3-way wiring for easy, economical installation. Wallplate not included. 120 volt, 60Hz. UL Listed. 600 watt maximum. Carded. Extra heavy, clear molded plugs are rugged, durable and oversized. Super flexible and abrasion resistant at any temperature. Made to meet OSHA specifications and UL Listed. 'PowerLite' indicator plug glows when the cord has power. 125 volts. Yellow. Sleeved.
Glacier ORCW511725 Tungsten Quartz Single Ended Extension Cord Bell 5638-5 Swivel Mount Photocontrol WPLT CENTURY ANT NKL STEEL 1T
Indicator light in the female end connector shows when the power is on. Cord stays flexible down to -58 degrees, stands up to 140 degrees Fahrenheit. Water, flame and abrasion resistant. Molded-on plug and connector with heavy-duty strain relief. cULus listed. Blue. Sleeved. Used for sunset activated automatic control of night lighting. Swivel switch, 1/2" NPT, 120 volt 50-60 HZ. Durable weatherproof construction. Built-in time delay to ignore auto headlamps or other temporary light flashes. Swivel switch, locknut. Fits with single lamp. 2000 watts. UL Listed. Traditional square corner design. With screws.
Powerzone ORK506725 SJTW Extension Cord Woods Cold Flex SJTW Outdoor Extension Cord With Powerlite Lightened End Cooper Wiring TAL06P-C1-K Trace Al Series LED/CFL/INCD/ HAL Dimmers
Rated for 300 volt, grounded. Manufactured with copper conductors and solid molded plugs and two layers of insulation, one around each conductor and a second outer jacket that won't mark floors or walls and resists deterioration from moisture and abrasion. UL, cULus  Listed, meets OSHA specifications. Sleeved. Designed for use in extreme cold weather environments. Cord will stay flexible down to -58 degrees Fahrenheit. Manufactured with Powerlite plug, female end lights when power is on. UL Listed, meets OSHA specifications. Blue. Sleeved. Replaces a standard switch and offers dimming capabilities. Integrated full-slide control. Use with dimmable LED/CFL, Incandescent, Halogen, Magentic Low-Voltage and Electronic Low-Voltage. 300W dimmable LED/CFL, 600W Incandescent/Halogen/Magnetic Low-Voltage/Electronic Low-Voltage. Preset feature allows user to return to previous light level when turning lights ON. Face plate is removable to allow for color changes. Each package includes 3 colors. Radio Frequency Interface filtering and Electrostatic discharge protection. Compatible with traditional toggle wallplate. Designed for both single-pole (one location) and 3-way (multi-location) applications, and features an adjustable Rapid-Start setting which provides additional power for a brief time period to ensure lamp start-up at low dim settings. Almond, white and ivory faceplates included.
WPLT DEVON WHITE STEEL 3T     WPLT CENTURY STN BRASS STL 1T WPLT CENTURY AGED BRZ STEEL 2T
WPLT DEVON WHITE STEEL 3T
Our Price: $20.39
With screws. 5" height x 4-5/8" width x 1/4" depth. Traditional square corner design. With screws. Traditional square corner design. With screws.
WPLT CENTURY AGED BRZ STEEL 3T Glacier ORCW511630 Round Extension Cord