Home > ELECTRICAL > HOUSEHOLD ELECTRICAL > EXTENSION CORDS > EXTENSION CORDS WITH GFCI
Sort By:
1
Arrow Hart 2131 Standard Wall Plate Arrow Hart 2131V-BOX Round Wall Plate WALLPLATE RCPT LT ALMOND 1G
Molded from non-flammable thermoset. Flush fitting, warp resistant design. Screw-catch feature holds mounting screws captive and simplifies installation. Matching screws provided. High gloss finish is soil resistant. Standard size - 2.75" x 4.50", boxed. Molded from non-flammable thermoset. Flush fitting, warp resistant design. Screw-catch feature holds mounting screws captive and simplifies installation. Matching screws provided. High gloss finish is soil resistant. Standard size - 2.75" x 4.50", boxed. Virtually unbreakable, with high structural rigidity, long-term form retention and impact and abrasion resistance. Screw-catch feature holds mounting screws captive. Matching screws provided. High gloss finish is soil resistant. Mid-size - 3.125" x 4.875".
Orrco 60170 Hex Nut Jandorf 60204 Flat Crossbar Jandorf 60230 Lamp Lock-Up Cap
Holds connecting parts in place. Crossbar for mounting light fixtures. Tapped 1/8" IP.
Cooper S1174W-SP Ceiling Receptacle Lampholder Jandorf 60203 Offset Crossbar Kit Eagle 604-SP Ceiling Receptacle Lampholder
Molded of high-temperature, thermoset plastic. Mounts on 4" outlet boxes with breakout for 3.25"  box mounting. 4 top wire screws. Terminal screws backed out. Meets all UL 496 requirements. 250 volt, 660 watts. Crossbar for mounting light fixtures. Porcelain. Mounts on 4" outlet boxes with breakout for 3-1/4" box mounting. One piece with feed through. Terminal screws backed out for wiring without removing the interior. UL 496 Listed, NOM Certified, meets CSA requirements. 250 volt, 660 watts.
Jandorf 60144 Lamp Coupling Jandorf 60232 Lamp Lock-Up Cap Jandorf 60162 Lamp Nipple
Decorative piece that connects nipples of different sizes together. Tapped 1/8" IP. For repairing or making lighting fixtures and lamps.
Jandorf 60234 Lamp Lockup Kit Jandorf 60235 Lamp Lockup Kit Jandorf 60109 Tapped Top Hat Lamp Finial
Secures center mount glass shade to ceiling fixture. Kit contains 1 - 1-1/8" check ring, 1 - lock-up cap 1/8 IP, 1 - 1/8 IP x 1" OD rubber washer white. Secures center mount glass shade to ceiling fixture. Kit contains 1 - 1-1/8" check ring, 1 - lock-up cap 1/8 IP, 1 - 1/8 IP x 1" OD rubber washer white. Secures lamp shade to harp.
Jandorf 60163 Lamp Nipple Jandorf 60231 Lamp Lock-Up Cap Jandorf 60145 Reducer
For repairing or making lighting fixtures and lamps. Tapped 1/8" IP. Connects nipples of different sizes.
Jandorf 60141 Assorted Lamp Screw Jandorf 94991 Beaded Chain With NO 6 Connector Jandorf 94992 Beaded Chain With NO 6 Connector
Used for holding lamp parts in place. Contains 3 each 8/32" x 1/2" knurled head screws - brass plated, 8/32" x 1/2" knurled head screws - nickel plated, and 8/32" x 3/4" knurled head screws - brass plated, and two each of 8/32" x 1" slotted machine screws - brass plated and 8/32" x 2" slotted machine screws - brass plated. With connector. With connector.
Jandorf 94993 Beaded Chain With NO 6 Connector Jandorf 60146 Reducer Jandorf 60354 Chain Connector
With connector. Connects nipples of different sizes. Links together two beaded chains.
Allied Moulded LH Keyless Lamp Holder With Terminal Screw Jandorf 60358 Chain Connector Jandorf 60226 Candelabra Base Socket Cover
Made of UV and heat resistant thermoset material (Urea). Nickel-plated brass screw shell. 250 volts/660 watts maximum. Includes corrosion resistant steel hardware. cULus Listed. Links together two beaded chains. Covers base socket. For use with a maximum 25W bulb.
Jandorf 94995 Beaded Chain With NO 10 Connector Jandorf 60148 Reducer Jandorf 60351 Chain Connector
With connector. Connects nipples of different sizes. Links together two beaded chains.
Jandorf 60353 Chain Connector Jandorf 60355 Pull Chain Bell Jandorf 60370 Chain Connector
Links together two beaded chains. Decorative attachment for end of beaded chain. Links together two beaded chains.
Jandorf 60372 Chain Connector Jandorf 60374 Chain Connector Jandorf 60375 Pull Chain Bell
Links together two beaded chains. Links together two beaded chains. Decorative attachment for end of beaded chain.
Jandorf 60376 Chain Connector Jandorf 60233 Lamp Lock-Up Cap Jandorf 60160 Lamp Nipple
Links together two beaded chains. Tapped 1/8" IP. For repairing or making lighting fixtures and lamps.
Jandorf 60208 Flat Crossbar Jandorf 60227 Standard Base Socket Cover Orrco 60142 Socket Key With 1/2 in Extension
Crossbar for mounting light fixtures. Covers base socket. For use with a maximum 25W bulb. Turns lamp on and off. Socket keys and 1/2" extensions, 4/36F x 4/36M.
Jandorf 60243 Lamp Loop Jandorf 60149 Lamp Coupling Jandorf 60250 Lamp Canopy Ball
Decorative piece used for hanging fixtures. 1/8 IP brass finish. Decorative piece that connects nipples of different sizes together. Secures canopy or blank up to crossbar. 8/32 thread, 3/8" diameter solid brass.
Jandorf 60171 Lamp Nipple Jandorf 60173 Lamp Nipple Jandorf 60100 Spindle Finial
For repairing or making lighting fixtures and lamps. For repairing or making lighting fixtures and lamps. Secures lamp shade to harp.
Jandorf 60147 Reducer Jandorf 60360 Pull Chain Bell Jandorf 60237 Ceiling Hickey
Connects nipples of different sizes. Decorative attachment for end of beaded chain. Used for mounting drop fixtures.
Jandorf 60238 Ceiling Hickey Jandorf 60205 Offset Swivel Crossbar Orrco 60167 Hex Nut
Used for mounting drop fixtures. Crossbar for mounting light fixtures. Holds connecting parts in place.
Jandorf 60150 Lamp Coupling Jandorf 60164 Lamp Nipple Orrco 60143 Socket Knob With 1/2 in Extension
Decorative piece that connects nipples of different sizes together. For repairing or making lighting fixtures and lamps. Turns lamp on and off. Includes 2 socket knobs - black, 2 - 1/2" extensions, 4/36F x 4/36M with brass finish.
Jandorf 60151 Reducer Jandorf 60161 Lamp Nipple Arrow Hart 93111-BOX Standard Wall Plate
Connects nipples of different sizes. For repairing or making lighting fixtures and lamps. Made of Type 304 stainless steel alloy for superior non-magnetic corrosion-resistant properties. Plates are 0.032" thick. Brushed satin finish resists fingerprints. Matching stainless steel mounting screws provided. Standard size - 2.75" x 4.50", with 1.594" hole.
Arrow Hart 93091-BOX Standard Wall Plate Jandorf 60240 Ceiling Hickey Jandorf 60241 Ceiling Hickey
Made of Type 304 stainless steel alloy for superior non-magnetic corrosion-resistant properties. Plates are 0.032" thick. Brushed satin finish resists fingerprints. Matching stainless steel mounting screws provided. Standard size - 2.75" x 4.50", with 1.406" hole, boxed. Used for mounting drop fixtures. Used for mounting drop fixtures.
Orrco 60201 Ceiling Crossbar Kit Powerzone 30000-3L Recessed Light Bar Hanger Jandorf 60174 Lamp Nipple
Crossbar for mounting light fixtures. Two piece hanger bar for 24" maximum joist spacing. Made of steel with a galvanized finish. For repairing or making lighting fixtures and lamps.
Orrco 60169 Hex Nut Cooper BP850V Night Light Cooper BP850W Night Light
Holds connecting parts in place. Meets all UL 1786 requirements. Soft action rocker switch. 3,000 hour lamp life. Shade can rotate 360 degrees. Molded of heat resistant plastic. 15 amp, 125 volt. UL Listed.  Carded. Meets all UL 1786 requirements. Soft action rocker switch. 3,000 hour lamp life. Shade can rotate 360 degrees. Molded of heat resistant plastic. 15 amp, 125 volt. UL Listed.  Carded.
NTLT TIPI LED MNUL FROST LENS Jandorf 60239 Ceiling Hickey Jandorf 60361 Beaded Chain With NO 6 Connector
Turns on with a switch and gives off 1 lumen of illumination through a frosted lens, enough to see by without being obtrusive. Great for bedrooms, hallways, entryways, basements, bathrooms and more. Designed with a modern style that works with any decor. Used for mounting drop fixtures. With connector.
Jandorf 60110 Tapped Top Hat Lamp Finial Jandorf 60209 Flat Crossbar With Nipple Jandorf 60172 Lamp Nipple
Secures lamp shade to harp. Crossbar for mounting light fixtures. For repairing or making lighting fixtures and lamps.
Jandorf 60102 Tapped Pyramid Finial Jandorf 60175 Lamp Nipple Jandorf 60101 Spindle Finial
Secures lamp shade to harp. For repairing or making lighting fixtures and lamps. Secures lamp shade to harp.
Jandorf 60357 Pull Chain Coupling Jandorf 60359 Pull Chain Coupling Jandorf 60103 Tapped Pyramid Finial
Used to secure beaded chain with a fastener. Used to secure beaded chain with a fastener. Secures lamp shade to harp.
Orrco 60168 Locknut Assortment NTLT ARIA LED A/O FROST LENS  Jandorf 60356 Pull Chain Coupling
Holds connecting parts in place. Contains two each 1/4-27 knurled locknuts, 1/8 IP knurled locknuts, 1/4 IP knurled locknuts, 8/32 battery nuts and four 1/8 IP hex nuts. Night time lighting solution. Automatically turns on in low light with enough light to see by without being obtrusive. 3000K warm illumination. Used to secure beaded chain with a fastener.
Jandorf 60242 Lamp Loop Jandorf 60106 Tapped Bullet Finial Jandorf 60120 Clip-On Lamp Shade Adapter
Decorative piece used for hanging fixtures. 1/8 IP brass finish. Secures lamp shade to harp. Brass finish.
Arrow Hart 39CH-BOX Wall Plate Arrow Hart Eagle 69-BOX Standard Wall Plate Arrow Hart Eagle 68-BOX Standard Wall Plate
Full gauge and size beveled-edge; furnished with mounting screws. Fit 1253, 1254 and 1263 flush receptacles. Standard size - 2.75" x 4.50", boxed. Fits 1257 and 1258 flush receptacles. Standard size two gang metal wallplate for power devices using a 2.1563" single opening.
Jandorf 60202 All Purpose Adjustable Crossbar Kit Jandorf 60121 Detachable Lamp Harp Eagle 659-SP Ceiling Receptacle Lampholder
Crossbar for mounting light fixtures. Protects bulb from lamp shade and holds lamp shade in place. Porcelain, mounts on 4" outlet box with breakout for 3-1/4" box mounting. Interior is removable. Includes ball chain, 3' of cord, connector and end ball. UL Listed, meets CSA requirements, NOM certified. 250 volt, 660 watts.
Jandorf 60107 Tapped Bullet Finial NYLT NEON ORBS                Jandorf 60122 Detachable Lamp Harp
NYLT NEON ORBS
Our Price: $4.33
Secures lamp shade to harp. Night time lighting solution. Automatically turns on in low light with enough light to see by without being obtrusive. 3000K warm illumination. Protects bulb from lamp shade and holds lamp shade in place.
Jandorf Acorn Finial Reducer With 1/8 M to 1/4-27 F Reducer NTLT MADISON LED A/O          Arrow Hart 669-SP Lampholder with 2 Wire Outlet
NTLT MADISON LED A/O
Our Price: $4.49
Secures lamp shade to harp. Contains one 1-1/2" acorn finial with a 1/8" M to 1/4-27 F reducer. Night time lighting solution. Automatically turns on in low light with enough light to see by without being obtrusive. 3000K warm illumination. With 15 amp 125 volt AC outlet. High-strength insulator porcelain. Mounts on 4" outlet boxes with breakout for 3-1/4" box mounting. Pull chain socket interior is removable. Includes ball chain, 3' of cord, connector and end bell. Terminal screws are backed out ready for wiring without removing the interior. Dust ring protects against plaster and dirt. UL 496 Listed, NOM Certified, meets CSA requirements. 15 amps, 125 volt, 660 watts.
Arrow Hart S865W-SP Lampholder with 2 Wire Outlet Jandorf 60140 Lamp Check Ring NTLT ARCH LED CLR CHNG
NTLT ARCH LED CLR CHNG
Our Price: $4.60
Meets all UL 496 requirements. Molded of high-temperature, thermoset plastic to prevent discoloration and reduce breakage. Mounts on 4" outlet boxes with breakout for 3-1/4" box mounting. Pull chain, includes ball chain, 3' of cord, connector and end bell. Terminal screws backed out, ready for wiring without removing interior. Push wire terminals are top wired with two push-in terminals and two screw terminals for continuous wiring. Two piece version with 15 amp 125 volt, 250 watts AC 2P3W outlet, plastic. Decorative highlight to cover opening. Contains 12 assorted check rings for 1/8" IP lamp nipples. Always on, 1 lumen of light as it cycles through all of the colors in the rainbow. Adds lively color to any room. 3.9" H x 1.7" W x 1.1" (w/o plug). 120V 60Hz, 0.5W.
Allied Moulded LH Lamp Holder Jandorf 60123 Detachable Lamp Harp Cooper 667-SP Ceiling Receptacle Lampholder
Made of UV and heat resistant thermoset material (Urea). Nickel-plated brass screw shell. 250 volts/660 watts maximum. Includes corrosion resistant steel hardware. cULus Listed. Protects bulb from lamp shade and holds lamp shade in place. With 15 amp 125 volt AC outlet. High-strength insulator porcelain. Mounts on 4" outlet boxes with breakout for 3-1/4" box mounting. Pull chain socket interior is removable. Includes ball chain, 3' of cord, connector and end bell. Terminal screws are backed out ready for wiring without removing the interior. Dust ring protects against plaster and dirt. UL 496 Listed, NOM Certified, meets CSA requirements. 15 amps, 125 volt, 660 watts.
Jandorf 60124 Detachable Lamp Harp Arrow Hart Eagle 2168 Standard Wall Plate Jandorf 60125 Detachable Lamp Harp
Protects bulb from lamp shade and holds lamp shade in place. Screw-catch feature holds mounting screws captive and simplifies installation. Matching mounting screws provided. Protects bulb from lamp shade and holds lamp shade in place.
Jandorf 60236 Screw Collar Loop Jandorf 60112 Tapped Ball Finial Arrow Hart S759W-CD-SP Lampholder
Decorative loop that secures 1 1/16" center hole canopy. 1/4 IP. Secures lamp shade to harp. Molded of heat and impact resistant plastic to prevent discoloring and reduce breakage. Mount on 4" outlet and have breakouts for 3-1/4" boxes. Mounting screws included. Terminal screws, staked and backed out for wiring without removing interior. Socket permit interior replacement. Dust ring protects against plaster and dirt. Include short length of ball chain, connector, 3' of cord and end bell. With shade groove. 250 volt, 250 watts.
Jandorf 60324 Beaded Chain With NO 6 Connector Jandorf 60352 Beaded Chain With NO 6 Connector Jandorf 60206 Loop Crossbar Kit
With connector. With connector. Crossbar for mounting light fixtures.
Jandorf 60220 Ceiling Blank-Up Kit Jandorf 60371 Beaded Chain With NO 6 Connector Jandorf 60373 Beaded Chain With NO 6 Connector
Decorative piece used to cover the outlet box after removal of an existing fixture. With connector. With connector.
Jandorf 60377 Beaded Chain With NO 6 Connector Jandorf 60136 Lamp Cord NTLT TRANSLCNT SCREEN LED A/O
With connector. With polarized plug. 18 gauge. Night time lighting solution. Automatically turns on in low light with enough light to see by without being obtrusive. 3000K warm illumination.
Jandorf Acorn Finial Reducer With 1/8 M to 1/4-27 F Reducer Jandorf 60211 Ceiling Canopy Kit Powerzone TM5 Open Recessed Light Fixture Trim
Secures lamp shade to harp. Contains one 1-1/2" acorn finial with a 1/8" M to 1/4-27 F reducer. Used to cover the outlet box and hang ceiling fixture. 5". Diameter of 7", white trim with baffle for use with 6" Non-IC/IC housings. Easy to install. Takes 1 medium base bulb, (not included). cULus Listed.
Powerzone TM12 Open Recessed Light Trim BAFFLE W/2 WH/TRIM BLK MTL 6IN Powerzone TM9 Open Recessed Light Trim
Easy to install. Takes one medium base bulb, (not included). 8" diameter open trim for use with 6" Non-IC housings. Halo E-series tapered metal baffle w/white trim, 2 included, wide and narrow. For use with E7RICAT and E7ICAT as well as Halo H7 series. UL Listed. Easy to install. Takes one medium base bulb, (not included). 8" diameter open trim for use with 6" Non-IC housings.
Cooper GU24W-SP Keyless Lampholder Powerzone TM3 Open Baffle Trim Powerzone TM2 Open Baffle Trim
Molded of high-temperature, thermoset plastic. Mounts on 4" (101.6mm) outlet box with knockouts for 3.25" (82.5mm) box mounting.  Comes with 6" pigtail leads that are 221 degrees F (105 degrees C) insulated standard number 18 AWG wire, stripped 0.75" (19.0mm). 660 watts, 250 volts AC. ROHS compliant. File E7182, cULus, Evaluated to UL496. Diameter of 7", white trim with baffle for use with 6" Non-IC/IC housings. Easy to install. Takes 1 medium base bulb, (not included). cULus Listed. Diameter of 7", white trim with baffle for use with 6" Non-IC/IC housings. Easy to install. Takes 1 medium base bulb, (not included). cULus Listed.
Powerzone TM6 Open Baffle Trim Jandorf 60118 Lamp Shade Riser Coleman 3570 SPT-3 Replacement Power Cord
Diameter of 7", white trim with baffle for use with 6" Non-IC/IC housings. Easy to install. Takes 1 medium base bulb, (not included). cULus Listed. Raises lamp shade. 1/4-27 thread. Right angle male cap, 1-1/4" appliance end slit and 3/8" insulation stripped. Includes instructions for replacing worn or damaged cords. 13 amp/125 volt.
BAFFLE W/2 WH/TRIM WHT MTL 6IN Jandorf 60119 Lamp Shade Riser NTLT TIPI LED MNUL FROST LENS
Halo E-series tapered metal baffle w/white trim, 2 included, wide and narrow. For use with E7RICAT and E7ICAT as well as Halo H7 series. UL Listed. Raises lamp shade. 1/4-27 thread. Turns on with a switch and gives off 1 lumen of illumination through a frosted lens, enough to see by without being obtrusive. Great for bedrooms, hallways, entryways, basements, bathrooms and more. Designed with a modern style that works with any decor.
NTLT COSMOPOLITAN LED A/O NKL Jandorf 60165 Lamp Pipe Halo 301P Open Recessed Light Trim
Night time lighting solution. Automatically turns on in low light with enough light to see by without being obtrusive. 3000K warm illumination. For repairing or making lighting fixtures and lamps. Open recessed  trim ring, 7-1/4" OD, for use with 6" housings: Halo model numbers (Orgill SKU numbers): H7T (284.2474), H7RT (942.0381) and SHALLOW H27T (989.1672). Sleeved.
Westinghouse 8133300 Honey Swirl Light Accessory Shade Allied Moulded LH Lamp Holder With Grounded Outlet Jandorf 60134 Lamp Cord
Honey swirl scavo shade with wide bell shape. Fitter - 2-1/4", height - 4-3/ 8", diameter - 6-7/ 8". Made of UV and heat resistant thermoset material (Urea). Nickel-plated brass screw shell. 250 volts/660 watts maximum. Includes corrosion resistant steel hardware. cULus Listed. With polarized plug. 18 gauge.
Jandorf 60135 Lamp Cord NTLT ARIA LED A/O FROST LENS  Coleman 0293 HPN Mini Replacement Extension Cord
With polarized plug. 18 gauge. Night time lighting solution. Automatically turns on in low light with enough light to see by without being obtrusive. 3000K warm illumination. Slotted miniature plug fits electric coffee makers, frypans and other small kitchen appliances with 1/2" spacing between contacts. 10 amp/125 volt. Sleeved.
Jandorf 60127 Detachable Lamp Harp Mr Heater 20381 Burner Head Coleman 0288 HPN Replacement Extension Cord
Protects bulb from lamp shade and holds lamp shade in place. For use with indoor gaslights. Replaces broken burner head or can be used with soft mantle F220353 and gasket 20339 to convert light from pre-formed mantle to soft mantle. Replacement cord for non-polarized irons and appliances. 15 amp/125 volt. Sleeved.
Halo 401P Open Recessed Light Trim NTLT OLAA LED A/O NKL         Jandorf 60138 Lamp Socket/Switch
NTLT OLAA LED A/O NKL
Our Price: $6.80
Open recessed  trim ring, 7-1/4" OD, for use with 6" housings: Halo model numbers (Orgill SKU numbers), H7T (540.1815), and SHALLOW H27T (989.1672). H7RT (942.0381). Sleeved. Night time lighting solution. Automatically turns on in low light with enough light to see by without being obtrusive. 3000K warm illumination. Lights up crafts and ceramic houses. 6' SPT-1 lamp cord, 18 gauge with on/off switch, candelabra base, clip-in socket and polarized plug. 75 watts maximum.
Jandorf 60218 Ceiling Blank-Up Kit Jandorf 60128 Detachable Lamp Harp CCI Mag-Lite Replacement SJTW Power Tool Cord
Decorative piece used to cover the outlet box after removal of an existing fixture. Protects bulb from lamp shade and holds lamp shade in place. Designed for easy use on appliances, power tools, lamps, water coolers, air conditioners, dryers, ranges and garbage disposals. Includes instructions for replacing worn or damaged cords. 2-conductor, 1-1/4" tool end slit, insulation stripped 3/8". 16/2 SJTW, 13 amp/125 volt. Sleeved.
NTLT MODO LED A/O NKL         Jandorf 60214 Ceiling Canopy Kit Jandorf 60215 Ceiling Canopy Kit
NTLT MODO LED A/O NKL
Our Price: $7.05
Night time lighting solution. Automatically turns on in low light with enough light to see by without being obtrusive. 3000K warm illumination. Used to cover the outlet box and hang ceiling fixture. 5". Used to cover the outlet box and hang ceiling fixture. 5".
Jandorf 60216 Ceiling Canopy Kit Jandorf 60133 Lamp Cord Jandorf 60212 Ceiling Canopy Kit
Used to cover the outlet box and hang ceiling fixture. 5". With polarized plug. 18 gauge. Used to cover the outlet box and hang ceiling fixture. 5".
Coleman 0290 HPN Extension Cord Coleman 0291 HPN Extension Cord Cooper 545B-BOX Lampholder
Fits all standard brand roasters, broilers and deep fryers using pin spacing of 1-1/16". 15 amp/125 volt. Sleeved. Fits all kitchen appliances using 11/16" spacing between contacts such as waffle irons, grills, and bottle warmers. 10 amp/125 volt. UL Listed. Sleeved. For pole barns.
Halo 300P Open Recessed Light Trim Westinghouse 8186900 Light Shade Powerzone OR210606 SPT Power Cord
Open recessed  trim ring, 7-1/4" OD, 3-7/8" ID, for use with 6" housings: Halo model numbers (Orgill SKU numbers), H7ICT (552 4277), H71CAT (854 3951), H7RIC (025 9697). Sleeved. Fitter - 3-1/4", diameter - 6" Low profile, right angle, molded-on plug, 1/2" insulation strip with twisted and tip-tinned ends. cULus Listed. Sleeved.
Jandorf 60219 Ceiling Blank-Up Kit Powerzone TRIM201-BK (MTM2) Baffle Trim Jandorf 60217 Ceiling Canopy Kit
Decorative piece used to cover the outlet box after removal of an existing fixture. For use with 4" recessed lights. E27 socket. Use R20/PAR20 maximum 50 watt bulb (not included). Used to cover the outlet box and hang ceiling fixture. 5".
NTLT GLOW PANEL 2CLR          Jandorf 60213 Ceiling Canopy Kit Coleman 0863 SPT Power Tap Extension Cord
NTLT GLOW PANEL 2CLR
Our Price: $8.32
Two color modes, blue and magenta, which can be controlled by a switch on its side. Small, compact housing. Always on, 1 lumen of light. 3.35" H x 2.75" W x 0.5" (w/o plug). 120V, 60Hz, 1W. Used to cover the outlet box and hang ceiling fixture. 5". Solid molded power taps and three outlets in a compact design. Features solid molded plugs and stranded all-copper conductors. Made with tough vinyl insulation that won't mark walls or floors and resists deterioration from moisture and abrasion. 15 amp/125 volt. Sleeved.
Halo H7ICT Recessed Housing Powerzone OR890708 3-Outlet Extension Cord Cooper BP851W Night Light
For use with 120 volt Incandescent lamps. Aluminum construction for greater heat dissipation. For installations where housing will be in direct contact with ceiling insulation. Integral thermal protector guards against misuse of insulation materials and improper lamping. Adjustable socket bracket assures proper and consistent lamp positing. Junction box is listed for through branch circuit wiring and has seven 1/2" knockouts. Slide-N-Slide connectors allow non-metallic sheathed cable to be installed without removing knockouts. Pre-installed captive bar hangers allow housing to be positioned at any point within a 24" joist span. Can be field shortened for 12" joist.  Installation: 7-1/2" height allows use in 2 x 8 joist construction. Housing accommodates ceilings up to 2" thick. Requires 6-1/2" ceiling opening. Listings: UL Damp Locations. UL Feed Through. UL Listed for direct contact with insulation. CSA Certified. IP Rated. Three weather resistant outlets. Meets all UL 1786 requirements. Automatically turns on when it is dark and off when light. Molded of heat resistant plastic. Includes one 3,000 hour bulb.
Cooper BP851BGE Night Light Coleman 0292 HPN Extension Cord NTLT LED DIRECTIONAL A/O
Meets all UL 1786 requirements. Automatically turns on when it is dark and off when light. Molded of heat resistant plastic. Includes one 3,000 hour bulb. Polarized for heat-producing appliances. 15 amp/125 volt. Sleeved. Night time lighting solution. Automatically turns on in low light with enough light to see by without being obtrusive. 3000K warm illumination.
Arrow Hart TR274 Duplex Combination Switch/Receptacle Coleman 0295 HPN Extension Cord Halo 5000P Open Splay Trim
Shutter designed to prevent the insertion of foreign objects. Neon pilot light which is on when switch is on. Switch is horsepower rated for motor loads per UL 20. Thermoplastic toggle, top and backbody. Ultrasonic welding and integrated construction of the strap and body. Tri-combo screw heads. Backwire clamps on side terminals for installation of #12 and #14 AWG wire. Single pole - 15 amp switch, 2-pole, 3-wire tamper resistant receptacle. UL listed, NEMA 5-15. For use with pin-type construction such as mixers, electric knives, warming trays and calculators using 5/16" spacing between contacts. 6 amp/125 volt. cUL Listed. Sleeved. Diameter of 6-1/2", white trim for use with 5" incandescent rounds. Non-insulated or insulated housings. 75 watt maximum. Bulb sold separately. For use with 5" housings: Halo model numbers (Orgill SKU numbers), H5T (424.1535), H5ICAT (651.3956) and H5RT (635.6182).
Arrow Hart 2131W-BOX Round Wall Plate Halo 70PS Recessed Light Shower Trim Halo H7ICAT Recessed Housing
Molded from non-flammable thermoset. Flush fitting, warp resistant design. Screw-catch feature holds mounting screws captive and simplifies installation. Matching screws provided. High gloss finish is soil resistant. Standard size - 2.75" x 4.50", boxed. Wet location and AIR-TITE listed white trim with frosted Albalite Lens. 8" OD, for use with 6" housings: Halo model numbers (Orgill SKU numbers): H7T (284.2474), H7RT (942.0381), and SHALLOW H27T (989.1672). Sleeved. Air-tite fixture sealed and gasketed to prevent airflow between attic and living areas. For installations where housing will be in direct contact with ceiling insulation. Integral thermal protector guards against misuse of insulation materials and improper lamping. Adjustable socket bracket assures proper and consistent lamp positing. Junction box is listed for through branch circuit wiring and has seven 1/2" knockouts. Slide-N-Slide connectors allow non-metallic sheathed cable to be installed without removing knockouts. Pre-installed captive bar hangers allow housing to be positioned at any point within a 24" joist span. Can be field shortened for 12" joist.  Installation: 7-1/2" height allows use in 2 x 8 joist construction. Housing accommodates ceilings up to 1" thick. Requires 6-1/2" ceiling opening. Listings: UL Damp Locations. UL Feed Through. UL Listed for direct contact with insulation. CSA Certified. IP Rated.
Jandorf Make A Lamp Lamp Kit Westinghouse 8149400 Clip-On Shade Cooper TR274V Duplex
Create a lamp or repair an existing one. 8' SPT-1 lamp cord (18 gauge) with polarized plug, push-through socket rated: 660W-250V. Lock nut and lamp nipple. White plastic dome. 4-1/4" height, 7-3/4" diameter. Shutter designed to prevent the insertion of foreign objects. Neon pilot light which is on when switch is on. Switch is horsepower rated for motor loads per UL 20. Thermoplastic toggle, top and backbody. Ultrasonic welding and integrated construction of the strap and body. Tri-combo screw heads. Backwire clamps on side terminals for installation of #12 and #14 AWG wire. Single pole - 15 amp switch, 2-pole, 3-wire tamper resistant receptacle. UL listed, NEMA 5-15.
Cooper TR274W Duplex RECEPTACLE/SWITCH COMBO LA    Powerzone ORADL611802 SJTOW Pro Triple Tap Extension Cord
Shutter designed to prevent the insertion of foreign objects. Neon pilot light which is on when switch is on. Switch is horsepower rated for motor loads per UL 20. Thermoplastic toggle, top and backbody. Ultrasonic welding and integrated construction of the strap and body. Tri-combo screw heads. Backwire clamps on side terminals for installation of #12 and #14 AWG wire. Single pole - 15 amp switch, 2-pole, 3-wire tamper resistant receptacle. UL listed, NEMA 5-15. Shutter designed to prevent the insertion of foreign objects. Neon pilot light which is on when switch is on. Switch is horsepower rated for motor loads per UL 20. Thermoplastic toggle, top and backbody. Ultrasonic welding and integrated construction of the strap and body. Tri-combo screw heads. Backwire clamps on side terminals for installation of #12 and #14 AWG wire. Single pole - 15 amp switch, 2-pole, 3-wire tamper resistant receptacle. UL listed, NEMA 5-15. Contractor cord with lighted end. 15 amp/125 volt/1875 watts. Oil resistant, water resistant, flame retardant. Stays flexible down to -58 degrees Fahrenheit, stands up to 221 degrees Fahrenheit. UL, cULus Listed and CSA Certified. Meets OSHA requirements for outdoor use. Sleeved.
Coilex Halo 310P Baffle Trim Cooper Wiring 277W-BOX Combination Devices Cooper Wiring 277V-BOX Combination Devices
Trim ring with phenolic baffle, 7-1/4" OD, for use with 6" housings: Halo model numbers (Orgill SKU numbers), H7T (540.1815), H71CT (552.4277), H71CAT (854.3951), H7RT (942.0381), H7RIC (025.9697) and SHALLOW H27T (989.1672). Sleeved. Single pole side wire switch. Grounding terminal screw standard. 15 amp, 120/277 volt rating. 0.050" thick steel mounting strap zinc-plated for corrosion resistance. Terminal screws backed out ready for wiring. Side wire terminals accept up to #10 solid or stranded wire. Pilot light rating of 1/25 watt - 120 volt, may be wired to indicate power "on" or power "off". Combination slot/Phillips head mounting and terminal screws. Single pole side wire switch. Grounding terminal screw standard. 15 amp, 120/277 volt rating. 0.050" thick steel mounting strap zinc-plated for corrosion resistance. Terminal screws backed out ready for wiring. Side wire terminals accept up to #10 solid or stranded wire. Pilot light rating of 1/25 watt - 120 volt, may be wired to indicate power "on" or power "off". Combination slot/Phillips head mounting and terminal screws.
Arrow Hart 271 Duplex Grounded Toggle Switch Arrow Hart 271V Duplex Grounding Toggle Switch Arrow Hart 271W Duplex Grounding Toggle Switch
Grounding terminal screw standard. Combination switch with additional switch has 120/277 volt rating, ideal for fluorescent lighting fixtures typical in commercial applications. 0.050" thick steel mounting strap zinc-plated for corrosion resistance. Break-off provision for wiring both devices on same circuit or on separate circuits. Terminal screws backed out and ready for wiring. Side wire terminals accept up to #10 solid or stranded wire. Combination slot/Phillips head mounting and terminal screws. Switches meet all UL 20 requirements. UL Listed. Grounding terminal screw standard. Combination switch with additional switch has 120/277 volt rating, ideal for fluorescent lighting fixtures typical in commercial applications. 0.050" thick steel mounting strap zinc-plated for corrosion resistance. Break-off provision for wiring both devices on same circuit or on separate circuits. Terminal screws backed out and ready for wiring. Side wire terminals accept up to #10 solid or stranded wire. Combination slot/Phillips head mounting and terminal screws. Switches meet all UL 20 requirements. UL Listed. Grounding terminal screw standard. Combination switch with additional switch has 120/277 volt rating, ideal for fluorescent lighting fixtures typical in commercial applications. 0.050" thick steel mounting strap zinc-plated for corrosion resistance. Break-off provision for wiring both devices on same circuit or on separate circuits. Terminal screws backed out and ready for wiring. Side wire terminals accept up to #10 solid or stranded wire. Combination slot/Phillips head mounting and terminal screws. Switches meet all UL 20 requirements. UL Listed.
Powerzone TRIM201-WH (MTM1) Baffle Trim Jandorf 60221 Glass Shade Holder Jandorf 60222 Glass Shade Holder
For use with 4" recessed lights. E27 socket. Use R20/PAR20 maximum 50 watt bulb (not included). Provides overhead lighting and supports glass shade. Includes: 1 glass shade holder with 18AWG pre-wired 6" insulated leads, ground wire and insulation - brass finish, 1 - 4" offset crossbar, 2 - 8-32 x 1/2" mounting screws, 2 - 8-32 x 2" mounting screws, 1 grounding screw and 3 knurled screws - brass finish. Rated 250V for use with 60W lamp maximum. Provides overhead lighting and supports glass shade. Includes: 1 glass shade holder with 18AWG pre-wired 6" insulated leads, ground wire and insulation - brass finish, 1 - 4" offset crossbar, 2 - 8-32 x 1/2" mounting screws, 2 - 8-32 x 2" mounting screws, 1 grounding screw and 3 knurled screws - brass finish. Rated 250V for use with 60W lamp maximum.
FIXTURE LT EYEBALL MTL WHT 6IN Powerzone TRIM205-WH (MTM4 Eyeball Recessed Light Trim Waste King 1024 Power Cord
Halo E-series 6" white trim with white eyeball. 35 degree tilt. Uses PAR30 lamp. UL Listed. For use with E7RICAT and E7ICAT as well as Halo H7 series. For 4" recess light. E27 socket. Use R20/PAR20, maximum 50 watt bulb, ( not included). Use with Waste King Garbage disposers. Supplies power to disposal from outlet. UL approved. Use for installations where the home is not hard wired, or in replacements where previously used power cord is damaged. 32" long, 16-gauge wire. 3 wire (green wire is ground).
Halo H750ICAT Recessed Housing Halo H750RICAT Remodel Recessed Housing NTLT SENTI LED MOTION ACTIVATD
For use with Halo H7 LED 600 Series and 900 Series LED modules. Rated for direct contact with air-permeable insulation in insulated ceilings, may also be used in non insulated ceilings. Air-tite fixture sealed and gasketed to prevent airflow between unconditioned areas and living areas. Rated for 15 watts maximum. 10-1/2" length x 7-1/2" width x 7-1/2" height with 1/2" plaster lip. Ceiling cutout: 6-1/2". For use with Halo H7 Collection 600 900 Series LED modules, designed for remodel into insulated ceilings and can be in direct contact with ceiling insulation. AIR-TITE housing design prevents airflow between attic and living areas. Single wall aluminum housing. Installs from below the ceiling in 1/2" or 5/8" ceiling material (may also be used in non insulated ceilings). Quick Connect wiring connectors included in junction box. Rated for 15 watts maximum. 13-1/4" length x 6-7/8" width x 7-1/2" height. Ceiling cutout: Match template supplied with housing - 6-1/4" typical. Two available modes, 2 lumen night light, 10 lumen motion detect. Great for hallways, entryways, basements, bathrooms, kitchens and more. 2.15" H x 2.5" W x 0.85" D (w/o plug). Front-facing frosted lens to diffuse the light evenly into the room. In night light mode, its energy-efficient LED bulbs cast a relaxing, warm and soft glow. In motion detect mode, the higher-intensity brightness shines for 60 seconds. Automatic dusk to dawn control saves money and energy by operating the light only in the dark. Warm (3000K) white light. 120V 60Hz, 1W.
NTLT POWER FAILURE LED        Jandorf 60132 SPT-1 Lamp Kit With Harp Coilex Halo 310W Baffle Trim
NTLT POWER FAILURE LED
Our Price: $10.44
Automatically turns on in low light with a 20 lumen LED that gives off warm light, enough to see by without being obtrusive. During power failures it turns on automatically and can be unplugged to use as a 40 lumen LED flashlight. Fold down plug and integrated rechargeable battery. Create a lamp or repair an existing one. 8' SPT-1 lamp cord (18 gauge) with polarized plug, push-through socket rated: 660W-250V. Lock nut and lamp nipple. Trim ring with phenolic baffle, 7-1/4" OD, for use with 6" housings: Halo model numbers (Orgill SKU numbers), H7T (540.1815), H71CT (552.4277), H71CAT (854.3951), H7RT (942.0381), H7RIC (025.9697) and SHALLOW H27T (989.1672). Sleeved.
Powerzone TRIM205-BN (MTM5) Eyeball Recessed Light Trim Powerzone OR010608 SJTW Power Cord CORD EXTEN 3-TAP 8FT 16/3 GRN
For 4" recess light. E27 socket. Use R20/PAR20, maximum 50 watt bulb, ( not included). Designed for use on appliances and power tools that use up to 13 amp/125 volt/1625 watts. Includes instructions on replacing worn or broken cords. 16/3 SJTW. UL, cULus Listed. Three weather resistant outlets.
Coleman 90218802 Plug Adapter Coleman 90208802 Plug Adapter Coilex Halo 410W Baffle Trim
Converts a standard 15 amp grounded receptacle to a locking 20 amp. receptacle. Stranded copper conductors, bright yellow jacket and solid molded plugs for longer life. Not Yellow Jacket compound. Double-thick 600 volt insulation. UL Listed, meets OSHA specifications. Converts a Twist-To-Lock 20 amp receptacle to an outlet that accepts 15 amp male plugs. Stranded copper conductors, bright yellow jacket and solid molded plugs for longer life. Not Yellow Jacket compound. Double-thick 600 volt insulation. UL Listed, Meets OSHA Specifications. White trim ring with phenolic baffle, 7-1/4" OD, for use with 6" housings: Halo model numbers (Orgill SKU numbers), H7T (540.1815) and H7RT (942.0381).
Powerzone TM4 Open Baffle Trim Coleman 3573 SPT-3 Replacement Power Cord Westinghouse 8116700 Swirl Light Shade
Diameter of 7-1/4", white trim with reflector for use with 6" Non-IC/IC housings. Easy to install. Takes 1 medium base bulb, R-30, 75 watt maximum, (not included). Right angle male cap, 1-1/4" appliance end slit and 3/8" insulation stripped. Includes instructions for replacing worn or damaged cords. 13 amp/125 volt. Fitter - 2 1/4", height - 5", diameter - 6".
Halo H5ICAT Recessed Housing Mr. Heater F220351 Preformed Mantle Yellow Jacket 2882 STW Power Block Adapter Cord
For installations where housing will be in direct contact with ceiling insulation. Air-tite fixture sealed and gasketed to prevent airflow between attic and living areas. Integral thermal protector guards against misuse of insulation materials and improper lamping. Junction box is listed for through branch circuit wiring and has seven 1/2" knockouts and four Romex knockouts with integral strain relief. Pre-installed captive bar hangers allow housing to be positioned at any point within a 24" joist span. Can be field shortened for 12" joist. Installation: 7-1/2" height allows use in 2 x 8 joist construction.  Housing accommodates ceilings up to 1-3/8" thick. Requires 5-3/4" ceiling opening. Listings: UL Damp Locations. UL Feed Through. UL Listed for direct contact with insulation. CSA Certified. IP Rated. Replaces broken preformed mantles, or can be used with ceramic burner head 20338 and gasket 20339 to convert light from soft mantle to preformed mantle. Fits Paulin gas lights. Three outlet adapters with high gloss, extra durable, super flexible wire. Solid molded power block head stands up to heat, cold and rough use. 15 amp/125 volt insulated wire. Meets OSHA standards, UL Listed.  Yellow. Sleeved.
Powerzone TRIM201-BN (MTM3) Baffle Trim Westinghouse 8190000 Light Globe NTLT DECOPLG LOUVER LED A/O WH
For use with 4" recessed lights. E27 socket. Use R20/PAR20 maximum 50 watt bulb (not included). White acrylic. 4" fitter, 8" diameter. Night time lighting solution. Automatically turns on in low light with enough light to see by without being obtrusive. 3000K warm illumination.
NTLT DCOPLG LOUVER LED A/O NKL NTLT DCOPLG LOUVER LED A/O BRZ Halo 5001P Splay Baffle Trim
Night time lighting solution. Automatically turns on in low light with enough light to see by without being obtrusive. 3000K warm illumination. Night time lighting solution. Automatically turns on in low light with enough light to see by without being obtrusive. 3000K warm illumination. Baffle, white trim. Diameter of 6-1/4" for use with 5" incandescent rounds. Non-insulated or insulated housings. 75 watt maximum. Bulb sold separately. For use with 5" housings: Halo model numbers (Orgill SKU numbers), H5T (424.1535), H5ICAT (651.3956) and H5RT (635.6182).
REFLECTOR SPECULR WHT TRIM 4IN Arrow Hart 5131B-BOX Wall Plate Arrow Hart 5131W-BOX Wall Plate
Reflector trim in the 4" trim family for use in recessed downlighting. Specular clear, white trim. Molded from non-flammable nylon. Flush fitting, warp resistant design. Screw-catch feature holds mounting screws captive and simplifies installation. Matching screws provided. High gloss finish is soil resistant. Standard size - 2.75" x 4.50", boxed. Molded from non-flammable nylon. Flush fitting, warp resistant design. Screw-catch feature holds mounting screws captive and simplifies installation. Matching screws provided. High gloss finish is soil resistant. Standard size - 2.75" x 4.50", boxed.
Arrow Hart 5131V-BOX Wall Plate BAFFLE W/TRIM WHITE 4IN       BAFFLE PLST STP WH RNG BLK 4IN