Home > ELECTRICAL > HOUSEHOLD ELECTRICAL > EXTENSION CORDS > HOUSEHOLD EXTENSION CORDS
Sort By:
1
WALLPLATE TEL/COAX LT ALM 1G  Arrow Hart 2128V-BOX Standard Wall Plate WALLPLATE PHONE/COAX LT ALM 1G
Molded from non-flammable thermoset. Flush fitting, warp resistant design. Matching screws provided. High gloss finish is soil resistant. Standard size - 2.75" x 4.50". Molded from non-flammable thermoset. Flush fitting, warp resistant design. Matching screws provided. High gloss finish is soil resistant. Standard size - 2.75" x 4.50". Molded from non-flammable Polycarbonate. Virtually unbreakable, with high structural rigidity, long-term form retention and superior impact and abrasion resistance. Screw-catch feature holds mounting screws captive and simplifies installation. Matching screws provided. High gloss finish is soil resistant. Mid-size - 3.125" x 4.875". With .375" hole.
Arrow Hart PJ11V Mid Size Wall Plate Arrow Hart PJ11W Mid Size Wall Plate Powerzone OR660606 SPT-2 Extension Cord
Molded from non-flammable Polycarbonate. Virtually unbreakable, with high structural rigidity, long-term form retention and superior impact and abrasion resistance. Screw-catch feature holds mounting screws captive and simplifies installation. Matching screws provided. High gloss finish is soil resistant. Mid-size - 3.125" x 4.875". With .375" hole. Molded from non-flammable Polycarbonate. Virtually unbreakable, with high structural rigidity, long-term form retention and superior impact and abrasion resistance. Screw-catch feature holds mounting screws captive and simplifies installation. Matching screws provided. High gloss finish is soil resistant. Mid-size - 3.125" x 4.875". With .375" hole. Three polarized outlets in a solid molded plug for convenient use indoors. Includes an attached safety cover for unused outlets. 13 amp/125 volt/1625 watts. UL, cULus Listed for indoor use only.
Powerzone OR670606 SPT-2 Extension Cord Powerzone OR670609 SPT-2 Extension Cord Powerzone OR660609 SPT-2 Extension Cord
Three polarized outlets in a solid molded plug for convenient use indoors. Includes an attached safety cover for unused outlets. 13 amp/125 volt/1625 watts. UL, cULus Listed for indoor use only. Three polarized outlets in a solid molded plug for convenient use indoors. Includes an attached safety cover for unused outlets. 13 amp/125 volt/1625 watts. UL, cULus Listed for indoor use only. Three polarized outlets in a solid molded plug for convenient use indoors. Includes an attached safety cover for unused outlets. 13 amp/125 volt/1625 watts. UL, cULus Listed for indoor use only.
Powerzone OR780609 SPT-2 Extension Cord Powerzone OR670612 SPT-2 Extension Cord Powerzone OR660612 SPT-2 Extension Cord
Household cord, indoor only. 16/2 SPT-2. One outlet to three. Three polarized outlets in a solid molded plug for convenient use indoors. Includes an attached safety cover for unused outlets. 13 amp/125 volt/1625 watts. UL, cULus Listed for indoor use only. Three polarized outlets in a solid molded plug for convenient use indoors. Includes an attached safety cover for unused outlets. 13 amp/125 volt/1625 watts. UL, cULus Listed for indoor use only.
Powerzone OR670615 SPT-2 Extension Cord Powerzone OR780615 SPT-2 Extension Cord Powerzone OR660615 SPT-2 Extension Cord
Three polarized outlets in a solid molded plug for convenient use indoors. Includes an attached safety cover for unused outlets. 13 amp/125 volt/1625 watts. UL, cULus Listed for indoor use only. Three polarized outlets in a solid molded plug for convenient use indoors. Includes an attached safety cover for unused outlets. 13 amp/125 volt/1625 watts. UL, cULus Listed for indoor use only. Three polarized outlets in a solid molded plug for convenient use indoors. Includes an attached safety cover for unused outlets. 13 amp/125 volt/1625 watts. UL, cULus Listed for indoor use only.
Gardner Bender GSW-61 Rotary Switch Coleman 2235 SPT-2 Extension Cord Westinghouse 7045200 Swag Hook
Brass terminals, #18 AWG, 6" stripped wire leads. Indoor only, household cord. Thin male plug keeps cord close to wall. Plug does not block other outlets. 13 amp/125 volt. UL Listed. Sleeved. Includes two each: 1-1/2" hooks, spring toggle wings, running thread studs, and wood screw bolts. Supports up to 30 pounds.
Westinghouse 7045000 Swag Hook Kit Westinghouse 7045100 Swag Hook Kit Westinghouse 7077000 Swag Hook Kit
Includes two each: 1-1/2" hooks, spring toggle wings, running thread studs, and wood screw bolts. Supports up to 30 pounds. Includes two each: 1-1/2" hooks, spring toggle wings, running thread studs, and wood screw bolts. Supports up to 30 pounds. Includes two each: 1-1/2" hooks, spring toggle wings, running thread studs, and wood screw bolts. Supports up to 30 pounds.
GB-Gardner Bender GSW-24 Canopy Switches GB-Gardner Bender GSW-25 Canopy Switches Powerzone OR920607 SPT-2 Extension Cord
Maintained contact switch family utilized in applications requiring continuous continuity contacts. Number 18 AWG, 6" stripped wire leads. Mounting nut included. Maintained contact switch family utilized in applications requiring continuous continuity contacts. Number 18 AWG, 6" stripped wire leads. Mounting nut included. Ultra thin 1/2" thick plug converts one outlet into three. Includes safety covers for unused outlets. UL, cULus Listed for indoor use only.
Gardner Bender GSW-69 Rotary Switch Jandorf 61224 Single Circuit Push Button Switch Jandorf 61216 Single Circuit Rotary Switch
Black plastic, .516",  brass terminals, #18 AWG, 6" stripped wire leads. Jandorf Push Button Switch, Single Circuit, Series: 61224, 125 V, 1 A, 1 Poles, Contact Configuration: SPST, On/Off, 2-Wire Terminal, Brass, UL Listed, Brass Canopy Jandorf Rotary Switch, Single Circuit, Series: 61216, 125 V, 1 A, Contact Configuration: SPST, On/Off, 1 Poles, 2-Wire Terminal, Black Hat Canopy, UL Listed
Jandorf 61217 Single Circuit Rotary Switch Gardner Bender GSW-62 Rotary Switch Westinghouse 7067000 Oval Fixture Chain 3 ft
Jandorf Rotary Switch, Single Circuit, Series: 61217, 125 V, 1 A, Contact Configuration: SPST, On/Off, 1 Poles, 2-Wire Terminal, White Hat Canopy, UL Listed Brass terminals, #18 AWG, 6" stripped wire leads. .406" mounting hole. CSA Listed. Used to hang lighting fixtures, planters, shelving and wind chimes or as drapery tie backs.
GB-Gardner Bender GSW-22 Momentary Switches Cooper LZR000212P Mini Track Light Connector Arrow Hart Eagle CS Lighted Toggle Switch
Basic pushbutton screw type terminal switch family utilized in applications requiring intermittent continuity contacts. Mounts in standard 1/2" diameter hole. Mounting nut included. () Indicates momentary action. For joining two sections end-to-end. Side wire terminals accept up to number 10 solid or stranded wire. Rated for fluorescent lighting fixtures typical in commercial applications. .050" thick steel mounting strap zinc-plated for corrosion resistance. Ground screw terminal standard. 20 amp, 120/277 volt. Meets all UL 20 requirements, Federal Specifications WS 896.
Coleman 0814 SPT-2 3-Outlet Power Tap Extension Cord Jandorf 61220 Single Circuit Rotary Switch Coleman 3570 SPT-3 Replacement Power Cord
Solid molded power taps, the convenience of 3 outlets in a compact design. Sleeved. Jandorf Rotary Switch, Single Circuit, Series: 61220, 125 V, 1 A, Contact Configuration: SPST, On/Off, 1 Poles, 2-Wire Terminal, Brass Knob, UL Listed Right angle male cap, 1-1/4" appliance end slit and 3/8" insulation stripped. Includes instructions for replacing worn or damaged cords. 13 amp/125 volt.
GB-Gardner Bender GSW-21 Canopy Switches Gardner Bender GSW-23 Push Button Switch Jandorf 61215 3-Way Double Circuit Rotary Switch
Maintained pushbutton switch. Push On-Push Off. #18 AWG, 6' stripped wire leads. Mounting nut included. Basic pushbutton screw type terminal switch family utilized in applications requiring intermittent continuity contacts. Mounts in standard 1/2" diameter hole. Mounting nut included. () Indicates momentary action. Jandorf Rotary Switch, 3-Way Double Circuit, Series: 61215, 125 V, 3 A, Off/On/On/On, 2 Poles, 4 Positions, 3-Wire Terminal, Brass Knob, UL Listed
Coleman 2236 SPT-2 Extension Cord Coleman 2239 SPT-2 Extension Cord Coleman 0293 HPN Mini Replacement Extension Cord
Indoor only, household cord. Thin male plug keeps cord close to wall. Plug does not block other outlets. 13 amp/125 volt. UL Listed. Sleeved. Indoor only, household cord. Thin male plug keeps cord close to wall. Plug does not block other outlets. 13 amp/125 volt. UL Listed. Sleeved. Slotted miniature plug fits electric coffee makers, frypans and other small kitchen appliances with 1/2" spacing between contacts. 10 amp/125 volt. Sleeved.
Coleman 0288 HPN Replacement Extension Cord CCI Mag-Lite Replacement SJTW Power Tool Cord Jandorf 61028 Plunger Single Circuit Push Button Switch
Replacement cord for non-polarized irons and appliances. 15 amp/125 volt. Sleeved. Designed for easy use on appliances, power tools, lamps, water coolers, air conditioners, dryers, ranges and garbage disposals. Includes instructions for replacing worn or damaged cords. 2-conductor, 1-1/4" tool end slit, insulation stripped 3/8". 16/2 SJTW, 13 amp/125 volt. Sleeved. Jandorf Push Button Switch, Plunger Single Circuit, Series: 61028, 125 V, 2 A, 1 Poles, Contact Configuration: SPST, Normally OFF, Momentary Snap Operation, Round Shape, 2-Tab Terminal, UL Listed
Jandorf 61212 Single Circuit Push Button Switch Coleman 2237 SPT-2 Extension Cord Coleman 0290 HPN Extension Cord
Jandorf Push Button Switch, Single Circuit, Series: 61212, 125 V, 3 A, 1 Poles, Contact Configuration: SPST, On/Off, NIC Operation, 2-Wire Terminal, Nickel Plated, UL Listed Indoor only, household cord. Thin male plug keeps cord close to wall. Plug does not block other outlets. 13 amp/125 volt. UL Listed. Sleeved. Fits all standard brand roasters, broilers and deep fryers using pin spacing of 1-1/16". 15 amp/125 volt. Sleeved.
Coleman 2241 SPT-2 Extension Cord Coleman 0291 HPN Extension Cord Arrow Hart Eagle CS Toggle Switch
Indoor only, household cord. Thin male plug keeps cord close to wall. Plug does not block other outlets. White, 13 amp/125 volt. UL Listed. Sleeved. Fits all kitchen appliances using 11/16" spacing between contacts such as waffle irons, grills, and bottle warmers. 10 amp/125 volt. UL Listed. Sleeved. Side wire terminals accept up to number 10 solid or stranded wire. Rated for fluorescent lighting fixtures typical in commercial applications. .050" thick steel mounting strap zinc-plated for corrosion resistance. Ground screw terminal standard. 20 amp, 120/277 volt. Meets all UL 20 requirements, Federal Specifications WS 896.
Arrow Hart Eagle CS Lighted Toggle Switch Jandorf 61306 Double Circuit Push Button Switch Powerzone OR210606 SPT Power Cord
Side wire terminals accept up to number 10 solid or stranded wire. Rated for fluorescent lighting fixtures typical in commercial applications. .050" thick steel mounting strap zinc-plated for corrosion resistance. Ground screw terminal standard. 20 amp, 120/277 volt. Meets all UL 20 requirements, Federal Specifications WS 896. Jandorf Push Button Switch, Double Circuit, Series: 61306, 120 V, 3 A, 1 Poles, Contact Configuration: SPST, Normally Off, Momentary Operation, 2-Screw Terminal, UL Listed, Black Canopy Low profile, right angle, molded-on plug, 1/2" insulation strip with twisted and tip-tinned ends. cULus Listed. Sleeved.
Jandorf 61029 Plunger Single Circuit Push Button Switch Jandorf 61221 Single Circuit Push Button Switch Jandorf 61214 3-Way Double Circuit Rotary Switch
Jandorf Push Button Switch, Plunger Single Circuit, Series: 61029, 125 V, 0.75 A, 1 Poles, Contact Configuration: SPST, Normally On, Momentary Operation, Round Shape, 2-Tab Terminal, UL Listed Jandorf Push Button Switch, Single Circuit, Series: 61221, 125 V, 1.5 A, 1 Poles, Contact Configuration: SPST, Normally Off, Momentary Operation, 2-Wire Terminal, UL Listed, For Industrial Controlling Circuits Jandorf Rotary Switch, 3-Way Double Circuit, Series: 61214, 125 V, 3 A, Off/On/On/On, 2 Poles, 4 Positions, 3-Wire Terminal, Brass Knob, UL Listed
Jandorf 61005 Single Circuit Rotary Switch Coleman 608 SPT-2 Cube Tap Extension Cord Coleman 609 SPT-2 Cube Tap Extension Cord
Jandorf Rotary Switch, Single Circuit, Series: 61005, 125 V, 6.5 A, Contact Configuration: TPST, Off/On/On/On, 1 Poles, 5-Tab Terminal, Black, UL Listed Three polarized outlets in a molded plug for convenient use indoors. Includes an attached safety cover for unused outlets. 13 amp/125 volt. UL Listed. Three polarized outlets in a molded plug for convenient use indoors. Includes an attached safety cover for unused outlets. 13 amp/125 volt. UL Listed.
Coleman 0292 HPN Extension Cord Jandorf 61004 Rotary Switch Coleman 0295 HPN Extension Cord
Polarized for heat-producing appliances. 15 amp/125 volt. Sleeved. Jandorf Rotary Switch, Series: 61004, 125 V, 3 A, Contact Configuration: TPST, Off/L1/L2/L3, 3 Poles, 4-Push-In Terminal, Black, UL Listed, 3-Speed For use with pin-type construction such as mixers, electric knives, warming trays and calculators using 5/16" spacing between contacts. 6 amp/125 volt. cUL Listed. Sleeved.
Jandorf 61213 Double Circuit Push Button Switch Jandorf 61204 Rotary Switch Jandorf 61036 Single Circuit Push Button Switch
Jandorf Push Button Switch, Double Circuit, Series: 61213, 125 V, 3 A, 1 Poles, 4 Positions, Contact Configuration: 3-Way, Off/On/On/On, 3-Wire Terminal, Brass, UL Listed, L1/L2/L1-2/Off, For Commercial and Industrial Jandorf Rotary Switch, Series: 61204, 125 V, 6.5 A, Contact Configuration: TPST, Off/L1/L2/L3, 3 Poles, 4-Wire Terminal, Black, UL Listed, 3-Speed Jandorf Push Button Switch, Single Circuit, Series: 61036, 125 V, 5 A, 1 Poles, Contact Configuration: SPST, On/Off, 2-Wire Terminal, Nickel Plated, UL Listed
Jandorf 61123 Single Circuit Push Button Switch Cooper Wiring 277W-BOX Combination Devices Cooper Wiring 277V-BOX Combination Devices
Jandorf Push Button Switch, Single Circuit, Series: 61123, 125 V, 10 A, 1 Poles, Contact Configuration: SPST, Normally Off, Momentary Operation, 2-Screw Terminal, UL Listed Single pole side wire switch. Grounding terminal screw standard. 15 amp, 120/277 volt rating. 0.050" thick steel mounting strap zinc-plated for corrosion resistance. Terminal screws backed out ready for wiring. Side wire terminals accept up to #10 solid or stranded wire. Pilot light rating of 1/25 watt - 120 volt, may be wired to indicate power "on" or power "off". Combination slot/Phillips head mounting and terminal screws. Single pole side wire switch. Grounding terminal screw standard. 15 amp, 120/277 volt rating. 0.050" thick steel mounting strap zinc-plated for corrosion resistance. Terminal screws backed out ready for wiring. Side wire terminals accept up to #10 solid or stranded wire. Pilot light rating of 1/25 watt - 120 volt, may be wired to indicate power "on" or power "off". Combination slot/Phillips head mounting and terminal screws.
Arrow Hart 271 Duplex Grounded Toggle Switch Arrow Hart 271V Duplex Grounding Toggle Switch Arrow Hart 271W Duplex Grounding Toggle Switch
Grounding terminal screw standard. Combination switch with additional switch has 120/277 volt rating, ideal for fluorescent lighting fixtures typical in commercial applications. 0.050" thick steel mounting strap zinc-plated for corrosion resistance. Break-off provision for wiring both devices on same circuit or on separate circuits. Terminal screws backed out and ready for wiring. Side wire terminals accept up to #10 solid or stranded wire. Combination slot/Phillips head mounting and terminal screws. Switches meet all UL 20 requirements. UL Listed. Grounding terminal screw standard. Combination switch with additional switch has 120/277 volt rating, ideal for fluorescent lighting fixtures typical in commercial applications. 0.050" thick steel mounting strap zinc-plated for corrosion resistance. Break-off provision for wiring both devices on same circuit or on separate circuits. Terminal screws backed out and ready for wiring. Side wire terminals accept up to #10 solid or stranded wire. Combination slot/Phillips head mounting and terminal screws. Switches meet all UL 20 requirements. UL Listed. Grounding terminal screw standard. Combination switch with additional switch has 120/277 volt rating, ideal for fluorescent lighting fixtures typical in commercial applications. 0.050" thick steel mounting strap zinc-plated for corrosion resistance. Break-off provision for wiring both devices on same circuit or on separate circuits. Terminal screws backed out and ready for wiring. Side wire terminals accept up to #10 solid or stranded wire. Combination slot/Phillips head mounting and terminal screws. Switches meet all UL 20 requirements. UL Listed.
Jandorf 61001 Plunger Single Circuit Push Button Switch Cooper LZR000200P Track Live-End Feed Jandorf 61120 Single Circuit Push Button Switch
Jandorf Push Button Switch, Plunger Single Circuit, Series: 61001, 125 V, 0.25 A, 1 Poles, Contact Configuration: SPST, Normally Off, Momentary Operation, 2-Screw Terminal, UL Listed With junction box cover. For starting a run at the beginning of track mounted to a junction box. For use with Lazer track only. Jandorf Push Button Switch, Single Circuit, Series: 61120, 125 V, 10 A, 1 Poles, Contact Configuration: SPST, Normally Off, Momentary Operation, 2-Tab Terminal, UL Listed
Jandorf 61121 Single Circuit Push Button Switch Jandorf 61206 3-Way Double Circuit Rotary Switch Jandorf 61011 Plunger Single Circuit Push Button Switch
Jandorf Push Button Switch, Single Circuit, Series: 61121, 125 V, 10 A, 1 Poles, Contact Configuration: SPST, Normally On, Momentary Operation, 2-Tab Terminal, UL Listed Jandorf Rotary Switch, 3-Way Double Circuit, Series: 61206, 125 V, 3 A, Off/L1/L2/L1-2, 2 Poles, 4 Positions, 3-Wire Terminal, Brass Knob, UL Listed, 2-Speed Jandorf Push Button Switch, Plunger Single Circuit, Series: 61011, 125 V, 5 A, 1 Poles, Contact Configuration: SPST, Normally On, Momentary Operation, 5/8 in, Round Shape, 2-Tab Terminal, UL Listed
Jandorf 61037 Plunger Single Circuit Push Button Switch Jandorf 61010 Long Plunger Single Circuit Push Button Switch Jandorf 61203 Double Circuit Push Button Switch
Jandorf Push Button Switch, Plunger Single Circuit, Series: 61037, 125 V, 0.25 A, 1 Poles, Contact Configuration: SPST, Normally On, Momentary Operation, 2-Screw Terminal, UL Listed Jandorf Push Button Switch, Long Plunger Single Circuit, Series: 61010, 250 V, 10 A, 1 Poles, Contact Configuration: SPST, Normally On/Off, Momentary Operation, Rectangle Shape, 3-Tab Terminal, UL Listed Jandorf Push Button Switch, Double Circuit, Series: 61203, 125 V, 1 A, 2 Poles, 4 Positions, Contact Configuration: 3-Way, Off/On/On/On, 3-Wire Terminal, Nickel Plated, UL Listed, 2-Speed, For Commercial and Industrial
Jandorf 61031 Long Plunger Single Circuit Push Button Switch Jandorf 61122 Single Circuit Push Button Switch Cooper LZR000202P Laser Track Floating Canopy Feed
Jandorf Push Button Switch, Long Plunger Single Circuit, Series: 61031, 125 V, 21 A, 1 Poles, Contact Configuration: SPDT, Normally On/Off, Momentary Snap Operation, 3-Tab Terminal, UL Listed Jandorf Push Button Switch, Single Circuit, Series: 61122, 125 V, 10 A, 1 Poles, Contact Configuration: SPST, Normally On, Momentary Operation, 2-Screw Terminal, UL Listed Connect to an existing electrical box located anywhere along the track. Comes with canopy cover, connector, dead end and mounting hardware.
Powerzone OR930606 SPT-2 Extension Cord Jandorf 61027 Plunger Short Push Button Switch Jandorf 61030 Plunger Single Circuit Short Push Button Switch
Ultra thin 1/2" thick plug converts one outlet into three. Includes safety covers for unused outlets. UL, cULus Listed for indoor use only. Jandorf Push Button Switch, Plunger Short, Series: 61027, 125 V, 2 A, 1 Poles, Contact Configuration: SPST, Normally On/Off, Momentary Operation, Rectangle Shape, 3-Tab Terminal, UL Listed Jandorf Push Button Switch, Plunger Single Circuit Short, Series: 61030, 125 V, 15 A, 1 Poles, Contact Configuration: SPST, Normally On/Off, Momentary Snap Operation, 3-Tab Terminal, UL Listed
Jandorf 61033 Single Circuit Rotary Switch Jandorf 61034 Single Circuit Rotary Switch Waste King 1024 Power Cord
Jandorf Rotary Switch, Single Circuit, Series: 61033, 125 V, 1 A, Contact Configuration: SPDT, Off/On/On, 1 Poles, 3-Tab Terminal, Plastic Knob, Black, UL Listed Jandorf Rotary Switch, Single Circuit, Series: 61034, 125 V, 1 A, Contact Configuration: SPTT, Off/On/On/On, 1 Poles, 4-Tab Terminal, Plastic Knob, Black, UL Listed Use with Waste King Garbage disposers. Supplies power to disposal from outlet. UL approved. Use for installations where the home is not hard wired, or in replacements where previously used power cord is damaged. 32" long, 16-gauge wire. 3 wire (green wire is ground).
CORD EXTEN FLAT PLUG 10FT WHT Mintcraft OR932610 Extension Cords Jandorf 61012 Plunger Single Circuit Push Button Switch
Ultra thin 1/2" thick plug converts one outlet into three. Includes safety covers for unused outlets. UL, cULus Listed for indoor use only. Jandorf Push Button Switch, Plunger Single Circuit, Series: 61012, 250 V, 2 A, 1 Poles, Contact Configuration: SPST, Normally On, Momentary Operation, 3/8 in, Round Shape, 2-Tab Terminal, UL Listed
Powerzone OR932606 Flat Extension Cord Powerzone OR010608 SJTW Power Cord Mintcraft OR890609 Office Cord
Powerzone Extension Cord, Flat, 6 ft Conductor, 3, Black Jacket, 1/2 in Thick, 3-Prong, For Use with Indoor Household Fixtures Designed for use on appliances and power tools that use up to 13 amp/125 volt/1625 watts. Includes instructions on replacing worn or broken cords. 16/3 SJTW. UL, cULus Listed. Medium duty, 16/3 SJT.
Lutron FS-5FH-DK Rotary Control Switch Coleman 3573 SPT-3 Replacement Power Cord Cooper LZR000203P Track Light L-Connector
Includes 2 changeable control knobs, one ivory and one white to match either color wall plate, (wall plate sold separately). 3-speed control is for use with one ceiling paddle fan. Rotate to select one of three fan speeds: low, medium, or high, or rotary on/off. Variable speed control can be used with 1 or more ceiling paddle fans or exhaust fans (do not mix fan types on control). Rotate to select fan speed, rotary on/off. Right angle male cap, 1-1/4" appliance end slit and 3/8" insulation stripped. Includes instructions for replacing worn or damaged cords. 13 amp/125 volt. To connect track sections at right angles or straight end-to-end. Includes straight and right angle covers.
CORD EXTEN FOOT SWITCH WHT 9FT Arrow Hart 2128B-BOX Standard Wall Plate Arrow Hart 2128W-BOX Standard Wall Plate
Holiday 9' 3-outlet cord with footswitch. Molded from non-flammable thermoset. Flush fitting, warp resistant design. Matching screws provided. High gloss finish is soil resistant. Standard size - 2.75" x 4.50". Molded from non-flammable thermoset. Flush fitting, warp resistant design. Matching screws provided. High gloss finish is soil resistant. Standard size - 2.75" x 4.50".
Coleman 0864 SJTW 3-Outlet Power Tap Extension Cord Powerzone ORD100304 SRDT Dryer Cord Arrow Hart 7700 Decorator Duplex Combination Switch
Solid molded power taps, the convenience of 3 outlets in a compact design. Sleeved. Power supply replacement cord with strain relief. Includes instructions for replacing worn or damaged cords. 30 amp/250 volt. UL, cULus Listed. Sleeved. High-impact resistant thermoplastic rocker, top and backbody. Injection molded housings and PVC resin, comply with UL94 V0 flammability ratings. Tri-combo screw heads, built-in wire stripper. Backwire clamps on side terminals for installation of #12 and #14 wire. Terminal screws are backed out for easier and faster wiring. Thick (0.045"/1.14mm) steel mounting strap is zinc-plated. Automatic grounding system eliminates the need for bonding jumper in grounded metal enclosure and provides redundant measure of ground continuity where a jumper is used. 120/277 volt AC, 15 amp rocker switches with break-off provision for wiring both devices on the same circuit or on separate circuits. UL, cUL Listed and NOM 426 rated.
Arrow Hart 7700 Decorator Duplex Combination Switch SWITCH DPLX DECO LT ALMOND    Coleman 2865 SJT 3-Outlet Power Tap Extension Cord
High-impact resistant thermoplastic rocker, top and backbody. Injection molded housings and PVC resin, comply with UL94 V0 flammability ratings. Tri-combo screw heads, built-in wire stripper. Backwire clamps on side terminals for installation of #12 and #14 wire. Terminal screws are backed out for easier and faster wiring. Thick (0.045"/1.14mm) steel mounting strap is zinc-plated. Automatic grounding system eliminates the need for bonding jumper in grounded metal enclosure and provides redundant measure of ground continuity where a jumper is used. 120/277 volt AC, 15 amp rocker switches with break-off provision for wiring both devices on the same circuit or on separate circuits. UL, cUL Listed and NOM 426 rated. High-impact resistant thermoplastic rocker, top and backbody. Injection molded housings and PVC resin, comply with UL94 V0 flammability ratings. Tri-combo screw heads, built-in wire stripper. Backwire clamps on side terminals for installation of #12 and #14 wire. Terminal screws are backed out for easier and faster wiring. Thick (0.045"/1.14mm) steel mounting strap is zinc-plated. Automatic grounding system eliminates the need for bonding jumper in grounded metal enclosure and provides redundant measure of ground continuity where a jumper is used. 120/277 volt AC, 15 amp rocker switches with break-off provision for wiring both devices on the same circuit or on separate circuits. UL, cUL Listed and NOM 426 rated. Solid molded power taps, the convenience of 3 outlets in a compact design. Sleeved.
EXTENSION CORD SAFETY WHT 6FT EXTENSION CORD SAFETY GRN 6FT Halo LZR102P Miniature Linear Laser Track Light System
Safety cord monitors and senses excessive heat in outlets and plugs. When excessive heat is detected an audible alarm is sounded and a warning light is illuminated alerting about a possible issue before it becomes dangerous. Self-test button is on each end of the cord to test alerts. Safety shutters stop access to unused outlets. Safety cord monitors and senses excessive heat in outlets and plugs. When excessive heat is detected an audible alarm is sounded and a warning light is illuminated alerting about a possible issue before it becomes dangerous. Self-test button is on each end of the cord to test alerts. Safety shutters stop access to unused outlets. Overall height is 9/16" and the track has a decorative reveal at the ceiling line. It accepts both Lazer Track lampholders and Halo Power-Trac lampholders. Connectors push into the ends of the track.
React RFS5-W-K Fully Variable Non-Preset Rotary Control Switch React RFS5-V-K Fully Variable Non-Preset Rotary Control Switch Cooper Wiring 275V-BOX Combination Devices
Use to moderate air flow and room temperature anywhere. Replaces any standard wall switch. Rated at 5 amp to allow several fans to operate simultaneously. Designed to operate ceiling fans using shaded pole or split capacitor motors only. UL Listed. Use to moderate air flow and room temperature anywhere. Replaces any standard wall switch. Rated at 5 amp to allow several fans to operate simultaneously. Designed to operate ceiling fans using shaded pole or split capacitor motors only. UL Listed. Grounding terminal screw standard. Combination switch with additional switch has 120/277 volt rating, ideal for fluorescent lighting fixtures typical in commercial applications. 0.050" thick steel mounting strap zinc-plated for corrosion resistance. Break-off provision for wiring both devices on same circuit or on separate circuits. Terminal screws backed out and ready for wiring. Side wire terminals accept up to #10 solid or stranded wire. Combination slot/Phillips head mounting and terminal screws. Switches meet all UL 20 requirements. UL Listed.
Cooper Wiring 275W-BOX Combination Devices Coleman 2864 SJTW 3-Outlet Power Tap Extension Cord Lutron FSQ-2FH-DK Rotary Control Switch
Grounding terminal screw standard. Combination switch with additional switch has 120/277 volt rating, ideal for fluorescent lighting fixtures typical in commercial applications. 0.050" thick steel mounting strap zinc-plated for corrosion resistance. Break-off provision for wiring both devices on same circuit or on separate circuits. Terminal screws backed out and ready for wiring. Side wire terminals accept up to #10 solid or stranded wire. Combination slot/Phillips head mounting and terminal screws. Switches meet all UL 20 requirements. UL Listed. Solid molded power taps, the convenience of 3 outlets in a compact design. Sleeved. Includes 2 changeable control knobs, one ivory and one white to match either color wall plate, (wall plate sold separately). 3-speed control is for use with one ceiling paddle fan. Rotate to select one of three fan speeds: low, medium, or high, or rotary on/off. Variable speed control can be used with 1 or more ceiling paddle fans or exhaust fans (do not mix fan types on control). Rotate to select fan speed, rotary on/off.
Patrol 7737V-BOX Night Light NIGHTLIGHT LED LA             EXTENSION CORD SAFETY WHT 12FT
NIGHTLIGHT LED LA
Our Price: $13.82
Dimmable 3 LED nightlight for bathrooms, hallways, stairs and landings. Flush-mounted, features low wattage LED lamps that consume a maximum of 1 watt of energy, rated for 50,000 hours lamp life. Full dimming as well as 3 preset levels. Sensor turns the nightlight on when ambient light is low, and off when ambient light is high. Built-in wire stripper speeds installation. 1 watt, 120 volt AC. Dimmable 3 LED nightlight for bathrooms, hallways, stairs and landings. Flush-mounted, features low wattage LED lamps that consume a maximum of 1 watt of energy, rated for 50,000 hours lamp life. Full dimming as well as 3 preset levels. Sensor turns the nightlight on when ambient light is low, and off when ambient light is high. Built-in wire stripper speeds installation. 1 watt, 120 volt AC. Safety cord monitors and senses excessive heat in outlets and plugs. When excessive heat is detected an audible alarm is sounded and a warning light is illuminated alerting about a possible issue before it becomes dangerous. Self-test button is on each end of the cord to test alerts. Safety shutters stop access to unused outlets.
Coleman 872 SJTW 3-Outlet Power Tap Extension Cord Patrol 7737W-K-L Night Light Cooper Wiring 276V-BOX Combination Devices
Solid molded power taps, the convenience of 3 outlets in a compact design. Sleeved. Dimmable 3 LED nightlight for bathrooms, hallways, stairs and landings. Flush-mounted, features low wattage LED lamps that consume a maximum of 1 watt of energy, rated for 50,000 hours lamp life. Full dimming as well as 3 preset levels. Sensor turns the nightlight on when ambient light is low, and off when ambient light is high. Built-in wire stripper speeds installation. 1 watt, 120 volt AC. Grounding terminal screw standard. Combination switch with additional switch has 120/277 volt rating, ideal for fluorescent lighting fixtures typical in commercial applications. 0.050" thick steel mounting strap zinc-plated for corrosion resistance. Break-off provision for wiring both devices on same circuit or on separate circuits. Terminal screws backed out and ready for wiring. Side wire terminals accept up to #10 solid or stranded wire. Combination slot/Phillips head mounting and terminal screws. Switches meet all UL 20 requirements. UL Listed.
Cooper Wiring 276W-BOX Combination Devices Powerzone ORD100305 SRDT Dryer Cord Coleman 0359W SPT-2 Extension Cord
Grounding terminal screw standard. Combination switch with additional switch has 120/277 volt rating, ideal for fluorescent lighting fixtures typical in commercial applications. 0.050" thick steel mounting strap zinc-plated for corrosion resistance. Break-off provision for wiring both devices on same circuit or on separate circuits. Terminal screws backed out and ready for wiring. Side wire terminals accept up to #10 solid or stranded wire. Combination slot/Phillips head mounting and terminal screws. Switches meet all UL 20 requirements. UL Listed. Power supply replacement cord with strain relief. Includes instructions for replacing worn or damaged cords. 30 amp/250 volt. UL, cULus Listed. Sleeved. Manufactured with a polarized outlet in a molded plug for convenient use indoors. Remote on/off switch for easy power control. 13 amp/125 volt. Sleeved.
Cooper LZR000208P Laser Track Light Cord/Plug Arrow Hart 3032 Lighted Toggle Switch Powerzone ORD100404 SRDT Dryer Cord
Three wire 10' cord with grounded plug. Maximum capacity of 5 amps. Industrial design cam action mechanism insures quiet switch action. Color-coded faces identify amperage: blue-15 amp, red-20 amp, green-30 amp. Automatic grounding system eliminates need for bonding jumper in grounded metal enclosure. Back and side wire terminals accept up to number 10 solid or stranded wire. Ground screw terminal standard. 0.050" thick steel mounting strap zinc-plated for corrosion resistance. 30 amp, 120/277 volt rating for fluorescent lighting fixtures. Combination slot/Phillips head mounting and terminal screws. Meets all UL 20 requirements, Federal specifications WS 896. Power supply replacement cord with strain relief. Includes instructions for replacing worn or damaged cords. 30 amp/250 volt. UL, cULus Listed. Sleeved.
Jandorf 60260 Swag Kit Mintcraft OR890715 Shop Cords Cooper 35MRW Wall Plate
Used for hanging a light fixture when there is no overhead electrical source. Contains one each 15' chain, 20' SPT-1 cord with polarized plug (18 gauge) and feed-through cord switch (3A 125V), and two each swag hooks, hanger bolts, threaded studs and spring toggle wings. Heavy duty, 14/3. Shallow design provides ample room behind the drywall and between the studs, and accommodates cable bend requirements. Enclosure has three side openings which provide for the installation of two connectivity points for power, audio, and video and another for cable entry. Includes cover plate with flex rubber pass-through for gripping and positioning of cables and cords; can also be used as template for outlining cover cutout on wall. Swing-out clamps lock the plate securely to wall. Allows for single receptacle at point of installation, perfect for wall-mounted flat screen TVs.
Jandorf 60262 Swag Kit Cooper Lighting LZR000104P Lazer Lighting Tracks Cooper 7521W-K-L Decorator Switch
Used for hanging a light fixture when there is no overhead electrical source. Contains one each 15' chain, 20' SPT-1 cord with polarized plug (18 gauge) and feed-through cord switch (3A 125V), and two each swag hooks, hanger bolts, threaded studs and spring toggle wings. Overall height is 9/16" and the track has a decorative reveal at the ceiling line. It accepts both Lazer Track lampholders and Halo Power-Trac lampholders. Connectors push into the ends of the track. Switch only operates when finger pressure is applied. Thermoplastic rocker, top and backbody are virtually unbreakable. Industrial design cam action mechanism for quiet operation. Longer, wider strap provides more contact area to wall board, virtually eliminates floating installations. Built in wire stripper for number 12 and number 14 wire.
Cooper Lighting LZR000301P Halo Track Lights Cooper Wiring 7738V-BOX Arrow Hart Switch/Nightlights Cooper Wiring 7738W-K-L Arrow Hart Switch/Nightlights
White lampholder with baffle, compatible with all Halo Power-Trac systems for accent and display lighting applications where high coloring rendering and precise beam control are required. PAR20/30/38, MR16, BR30, R20/30, A19 lamp options. Matching arm allows lamp holder to rotate and adjust. Dimmable 3 LED nightlight combination with switch for bathrooms, hallways, stairs and landings. Flush-mounted, features low wattage LED lamps that consume a maximum of 1 watt of energy, rated for 50,000 hours lamp life. Full dimming as well as 3 preset levels. Sensor turns the nightlight on when ambient light is low, and off when ambient light is high. Built-in wire stripper speeds installation. 15 amp, 120 volt AC switch, 1watt, 120 volt AC nightlight. Temperature rating: 0 to 40 degreesC (32 to 104 degreesF). cULus Listed to UL20, file no. E18704. Dimmable 3 LED nightlight combination with switch for bathrooms, hallways, stairs and landings. Flush-mounted, features low wattage LED lamps that consume a maximum of 1 watt of energy, rated for 50,000 hours lamp life. Full dimming as well as 3 preset levels. Sensor turns the nightlight on when ambient light is low, and off when ambient light is high. Built-in wire stripper speeds installation. 15 amp, 120 volt AC switch, 1watt, 120 volt AC nightlight. Temperature rating: 0 to 40 degreesC (32 to 104 degreesF). cULus Listed to UL20, file no. E18704.
SWITCH/NIGHTLIGHT LED LA      Powerzone ORR628104 SRDT Range Cord Powerzone ORD100306 SRDT Dryer Cord
SWITCH/NIGHTLIGHT LED LA
Our Price: $17.45
Dimmable 3 LED nightlight combination with switch for bathrooms, hallways, stairs and landings. Flush-mounted, features low wattage LED lamps that consume a maximum of 1 watt of energy, rated for 50,000 hours lamp life. Full dimming as well as 3 preset levels. Sensor turns the nightlight on when ambient light is low, and off when ambient light is high. Built-in wire stripper speeds installation. 15 amp, 120 volt AC switch, 1watt, 120 volt AC nightlight. Temperature rating: 0 to 40 degreesC (32 to 104 degreesF). cULus Listed to UL20, file no. E18704. Power supply replacement cord with strain relief. Includes instructions for replacing worn or damaged cords. 6/2 & 8/1 SRDTUL, 50 amp/250 volt. cULus Listed. Sleeved. Power supply replacement cord with strain relief. Includes instructions for replacing worn or damaged cords. 30 amp/250 volt. UL, cULus Listed. Sleeved.
Jandorf 60261 Swag Kit Cooper Wiring RDC15-V-K Fan/Light Controls Cooper RDC15-W-K Combination Switch
Used for hanging a light fixture when there is no overhead electrical source. Contains one each 15' chain, 20' SPT-1 cord with polarized plug (18 gauge) and feed-through cord switch (3A 125V), and two each swag hooks, hanger bolts, threaded studs and spring toggle wings. Adjust lights and fans together. For overhead light/fan combination fixtures. Rated for 300 watt light. Designed to operate ceiling fans using shaded pole or split capacitor motors only. 4 speed with wire leads. UL Listed. Adjust lights and fans together. For overhead light/fan combination fixtures. Rated for 300 watt light. Designed to operate ceiling fans using shaded pole or split capacitor motors only. 4 speed with wire leads. UL Listed.
Lutron Electronics SFSQ-LFH-WH Fan/Light Controls Cooper Lighting LZR000301P/W Halo Track Lights Cooper Lighting LZR000304P/W Halo Track Lights
Rocker switch turns light on/off. Single pole, 1.5 amp 3 speed fan control with light switch. Wallplate not included. White lampholder with baffle, compatible with all Halo Power-Trac systems for accent and display lighting applications where high coloring rendering and precise beam control are required. PAR20/30/38, MR16, BR30, R20/30, A19 lamp options. Matching arm allows lamp holder to rotate and adjust. For use with Halo, Power-Trac and Lazer-by-Halo track systems. Lamps supported include R, PAR, A and BR types. 4" width x 5-3/8 depth, maximum extension 8-1/4".
Cooper Lighting LZR000330P Halo Track Lights Arrow Hart 7700 Decorator Single Combination Switch Arrow Hart 7700 Decorator Single Combination Switch
Designed for use with Halo Power-Track and Lazer-by-Halo track systems. Lamp: 75W PAR30 (Short neck lamp only). 4" width x 4-1/4" depth, maximum extension 7-15/16". High-impact resistant thermoplastic rocker, top and backbody. Injection molded housings and PVC resin, comply with UL94 V0 flammability ratings. Tri-combo screw heads, built-in wire stripper. Backwire clamps on side terminals for installation of #12 and #14 wire. Terminal screws are backed out for easier and faster wiring. Thick (0.045"/1.14mm) steel mounting strap is zinc-plated. Automatic grounding system eliminates the need for bonding jumper in grounded metal enclosure and provides redundant measure of ground continuity where a jumper is used. 120/277 volt AC, 15 amp rocker switches with break-off provision for wiring devices on the same circuit or on separate circuits. UL, cUL Listed and NOM 426 rated. High-impact resistant thermoplastic rocker, top and backbody. Injection molded housings and PVC resin, comply with UL94 V0 flammability ratings. Tri-combo screw heads, built-in wire stripper. Backwire clamps on side terminals for installation of #12 and #14 wire. Terminal screws are backed out for easier and faster wiring. Thick (0.045"/1.14mm) steel mounting strap is zinc-plated. Automatic grounding system eliminates the need for bonding jumper in grounded metal enclosure and provides redundant measure of ground continuity where a jumper is used. 120/277 volt AC, 15 amp rocker switches with break-off provision for wiring devices on the same circuit or on separate circuits. UL, cUL Listed and NOM 426 rated.
SWITCH DECO COMBO 3SP 15A LA  LAMP LED SILVER WIRELESS      LAMP LED BRONZE WIRELESS
High-impact resistant thermoplastic rocker, top and backbody. Injection molded housings and PVC resin, comply with UL94 V0 flammability ratings. Tri-combo screw heads, built-in wire stripper. Backwire clamps on side terminals for installation of #12 and #14 wire. Terminal screws are backed out for easier and faster wiring. Thick (0.045"/1.14mm) steel mounting strap is zinc-plated. Automatic grounding system eliminates the need for bonding jumper in grounded metal enclosure and provides redundant measure of ground continuity where a jumper is used. 120/277 volt AC, 15 amp rocker switches with break-off provision for wiring devices on the same circuit or on separate circuits. UL, cUL Listed and NOM 426 rated. Plastic, 60 lumens. Lightweight, durable and portable. Touching a finger to the top of the light turns it on and off. 3 "C" batteries (not included). Plastic, 60 lumens. Lightweight, durable and portable. Touching a finger to the top of the light turns it on and off. 3 "C" batteries (not included).
LAMP LED WHITE WIRELESS       Powerzone ORD100406 SRDT Dryer Cord Lutron Electronics SFSQ-FH-WH Skylark Fan Controls
Plastic, 60 lumens. Lightweight, durable and portable. Touching a finger to the top of the light turns it on and off. 3 "C" batteries (not included). Power supply replacement cord with strain relief. Includes instructions for replacing worn or damaged cords. 30 amp/250 volt. UL, cULus Listed. Sleeved. Controls one ceiling paddle fan. Fan capacity 1.5 amp maximum. Quiet, will not cause fan motor hum. High/Medium/Low/Off. Wallplate not included. 120 volt, 60 Hz. UL Listed.
Powerzone ORR628106 SRDT Range Cord Powerzone ORR628204 SRDT Range Cord LAMP LED LUX WIRELESS
Power supply replacement cord with strain relief. Includes instructions for replacing worn or damaged cords. 6/2 & 8/1 SRDTUL, 50 amp/250 volt. cULus Listed. Sleeved. Power supply replacement cord with strain relief. 4 wire, two 6/2 and two 8/2. Includes instructions for replacing worn or damaged cords. 6/2 & 8/1 SRDT, 50 amp/250 volt. UL, cULus Listed. Sleeved. Touch top operation. 100 lumens, 3 AA batteries (not included). Operates on a touch-activated, three-stage dimmer for varying levels of brightness.
REMOTE DIMMER DGTL MATCH WH/LA Powerzone ORR628206 SRDT Range Cord LIGHT CEILING LED 750 LUMEN
Decora Digital/Decora Smart Matching Dimmer remote is designed specifically to be used in 3-way or up to 4 location applications with Leviton?s Decora Digital or Decora Smart dimmers. It integrates digital circuitry that provides soft fade on/fade off, intuitive operation and a stylish form factor that is compatible with Leviton?s legendary Decora devices and wallplates. Slide bar preserves desired lighting level. The dimming remote turns the lights on/off and dim from multiple locations. Power supply replacement cord with strain relief. 4 wire, two 6/2 and two 8/2. Includes instructions for replacing worn or damaged cords. 6/2 & 8/1 SRDT, 50 amp/250 volt. UL, cULus Listed. Sleeved. Ceiling light fixture, dimmable, LED, white, installs through use of direct wire.
Lutron Electronics S2-LFSQH-WH Skylark Fan/Light Controls LIGHT LED LOW PRO 7IN 4000K   Maestro Eco-Timer MA-T530GH-WH Countdown Timer
Dual dimmer and fan controls. For use with one ceiling paddle fan with full range light dimmer. Rated for 1.5 amp fan and up to 300 watt incandescent/halogen light. 120 volt, 60 Hz. UL Listed. Round LED lamp is used in commercial office, retail, restaurant, school, hospital, multi family, and hotel/motel locations in interior hallways, bedrooms, utility/laundry rooms, living rooms, or recreational rooms. 4000K, 50,000 hours average life. UV, IR and mercury free. UL/cUL Listed for damp locations. Use with exhaust fans to reduce moisture, mold, and mildew. Use with lighting to ensure lights are never left on for a long period of time. Tap on to start timer; touch rocker to adjust countdown timer in five minute increments, up to 30 minutes. Softly lit orange LEDs indicate the time remaining before a one-minute warning signals when the fan or lights are about to turn off. Controls a 3 amp fan or up to 600 W/VA (5 amps) of incandescent/halogen or magnetic low-voltage lighting. No neutral wire required. UL listed.
CONTROL FAN/LIGHT F/LED WHITE LIGHT PUFF SQ LED 11.5IN 1100L LIGHT PUFF RND LED 13IN 1500 L
Single pole fan/light control. For adding a wall control to switch any light kit and change fan speed without pull chains. Switch for all bulb types including LED, CFL, incandescent and halogen. 120W, 1A LED / CFL, 240W, 2A Incandescent / halogen. 1.5A, 3-speed with off fan speed. For indoor use only. Ceiling light fixture, dimmable, LED, white, installs through use of direct wire. Ceiling light fixture, dimmable, LED, white, installs through use of direct wire.
FLSH MNT CEIL LED GLS BN 12IN LED DISK LIGHT 800L WHITE 5IN Cooper Lighting LZR000401P Halo Track Lights
Ceiling Light Fixture. Flush Mounted. LED universal surface mount downlight. Over 600 lumens, 90 CRI, 3000K, 120V, 50,000 hours. Flexible mounting with junction box bracket (included). Compatible with most recessed housings. Slot-N-Lock quick installation system. Ceiling and wall mount capability. Wet location listed - ceiling and IC (Insulated Ceiling) rated. With integral 12 volt electronic transformer. Designed for use with Halo Power-Track and Lazer-by-Halo track systems. Front loading lamp design. 12 volt MR16, 50 watts maximum. For accent and display lighting applications. 2-1/8" width x 2" depth, maximum extension of 4-7/8".
LIGHT SPIN LED4000K 11IN      Coleman L1755 Security Floodlight LED DISK LIGHT 800L WHITE 4IN
Spin light, used in residential, office, retail, restaurant, school, hospital, and hotel/motel locations in bathrooms, closets, utility rooms, interior hallways or interior stairwells. Can be wall or ceiling mounted. Mounts to all lamp holders. Round, 4,000K, white. UV, IR and mercury free. UL/cUL Listed for damp locations. Dusk to dawn 300 watt equivalent with button photocell. 10" acrylic reflector, provides 4,300 lumen output at 6,500 degrees K color temperature. Electronic ballast, 8,000 hour lamp life. E39 lamp base. Includes 65 watt mogul base fluorescent bulb. USA ONLY replacement bulb Feit Electric PLF65/65 - Orgill, Inc. SKU 0387977. CA compliant replacement bulb is SKU 1110907. UL & CUL Listed. LED universal surface mount downlight. Over 600 lumens, 90 CRI, 3000K, 120V, 50,000 hours. Flexible mounting with junction box bracket (included). Compatible with most recessed housings. Slot-N-Lock quick installation system. Ceiling and wall mount capability. Wet location listed - ceiling and IC (Insulated Ceiling) rated.
Cooper AL6501FL Area Light Heathco SL5651-AL Security Light LIGHT PUFF RND LED 15IN 1800 L
Fluorescent safety and security light. Weather resistant die cast aluminum housing. Operates on standard 120 volt 60 Hz household current. Intended to be conduit connected to a properly installed and properly grounded metal weatherproof junction box (not provided). Easy installation, mounting pattern included. Truer white light color compared to yellow high pressure sodium, use where energy efficiency and light color are important. Nighttime on/daytime off controlled by a non-replaceable button type photo control, cULus Listed for wet location use. 65 watt fluorescent bulb included. Replacement bulb is a 4U 65 watt Mogul base fluorescent, like Orgill SKU 038.7977. Dusk-to-dawn operation. Up to 10,400 square foot light coverage. Uses 1 CFL, E39 mogul base bulb (70W) included. Up to 10,000 hour bulb life. Operating temperature: -13 to 120 degrees F. 9.5" width x 12.375" depth x 14.5" height. Ceiling light fixture, dimmable, LED, white, installs through use of direct wire.
CEILING LIGHT FIX LED BN 11IN CEILING LIGHT FIX LED BZ 11IN CEILING LIGHT FIX LED WH 11IN
Flush Mount Ceiling Light Fixture Flush Mount Ceiling Light Fixture Flush Mount Ceiling Light Fixture
ETI Lighting 54074143 Ceiling Light Fixture ETI Lighting 54616142 Ceiling Light Fixture Cooper Lighting LZR000406P Halo Track Lights
Used in residential, office, retail, restaurant, school, hospital, and hotel/motel locations in bathrooms, closets, utility rooms, interior hallways or interior stairwells. Can be wall or ceiling mounted. Round, white. 50,000 hours average rated life. UV, IR and mercury-free. UL/Cul Listed for damp locations. Used in residential, office, retail, restaurant, school, hospital, and hotel/motel locations in bathrooms, closets, utility rooms, interior hallways or interior stairwells. Can be wall or ceiling mounted. White. 4,000K, UV, IR and mercury-free. UL/Cul Listed for damp locations. Polycarbonate casing and matching polycarbonate arm. Attaches electrically and mechanically anywhere along track. Deep drawn steel lamp housing with vents in rear. Die cast aluminum black baffle with lamp retention spring pulls out for relamping. Uses 12 volt MR16 lamps, 50 watt maximum. UL/CSA listed for use with Halo and Lazer-by-Halo track and track systems. 2-1/2" width x 3-7/8" depth, 6-3/4" maximum extension.
CEIL LT FXT LED GLS/BNKL 14IN CEIL LT FXT ACRY/SHD BN 12IN  Cooper Wiring 449NP-BOX Canopy Switches
Ceiling Light Fixture. Flush Mounted. Ceiling light fixture with acrylic shade UL Listed, (file no.E18704). Meets all CSA requirements, C22.2 no.111. Wide variety of sizes for use in fixtures, appliances, and equipment. Shank is threaded 15/32"-32 x 15/32" long. Keyed shank, hex nut and finishing nut furnished. 6 wire lead terminals, #18 stripped 3/4". Temperature rating from -40 to 65 degrees Celsius.
LIGHT LED RD DIM 4000K 11IN14W LIGHT LED 11IN SQ 14W BRS NIC CEIL LT FXT LD ACRYSHD BN 12IN
Round LED lamp is used in commercial office, retail, restaurant, school, hospital, multi family, and hotel/motel locations in interior hallways, bedrooms, utility/laundry rooms, living rooms, or recreational rooms. 4000K, 50,000 hours average life. UV, IR and mercury free. UL/cUL Listed for damp locations. Used in residential, office, retail, restaurant, school, hospital, and hotel/motel locations in bathrooms, closets, utility rooms, interior hallways or interior stairwells. Can be wall or ceiling mounted. White. 4,000K, UV, IR and mercury-free. UL/Cul Listed for damp locations. Ceiling light fixture with acrylic shade
CEIL LT FX ACR/SHD LED BN 12IN DIMMER PLUG-IN RETAIL KIT     SWITCH NEUTRAL 5A
DIMMER PLUG-IN RETAIL KIT
Our Price: $52.79
SWITCH NEUTRAL 5A
Our Price: $52.89
Ceiling light fixture with acrylic shade For plug-in lamps. Offers smart lighting control without the Smart Bridge. Plug the dimmer into a standard outlet. The dimmer can control up to two lamps. Includes plug-in lamp dimmer, Pico remote and installation information. Provides switching of multiple load types. Turns lights or fan on and off. Control with a 2-button pico remote (sold separately). Works with incandescent, halogen, ELV and MLV, LED, fluorescent and fans. Neutral wire required. Coordinating wall plate sold separately. Works with voice assistant or smart phone via the free Lutron app for IOS and Android (Smart Bridge required) Connects with more leading smart home brands (including Amazon Alexa, Apple HomeKit, the Google Assistant, Nest, Serena shades and Sonos) than any other leading smart lighting control brand (Smart Bridge required).
DIMMER IN-WALL                CONTROL FAN/LIGHT F/DMMR WHITE DIMMER INWL EXPNSN RETAIL KIT
DIMMER IN-WALL
Our Price: $54.29
For wall and ceiling lights. Replaces an existing switch and does not require a neutral wire. Can control up to 17 bulbs (based on 8.5W LED bulb, 60 W incandescent equivalent). Works with up to 150 W dimmable LED/CFL OR 600 W incandescent/ halogen bulbs. (Wallplate sold separately). Use Pico remote for multi-location (2 or more switches controlling a set of lights. (Wall mount kit sold separately). Works with your voice assistant or smart phone via the free Lutron app. (Smart Bridge sold separately). Single pole, dual dimmer and fan controller. Tap on to preset light level / fan speed; tap off. Tap twice for full on. Touch rocker to adjust light level / fan speed. Four fan speeds plus off. Indicator lights display light level and fan speed. No canopy module required. Requires separate wires for fan and light. No neutral wire required. Front accessible service switch for fixture bulb replacement. Prevents tripping of AFCI breakers. Fault detection / indication. Light pull chain off detection. Lamp failure detection. Short circuit detection / protection. Capable of controlling up to 75W dimmable CFL / LED or 250W incandescent / halogen lighting loads. Capable of controlling up to 1.5A paddle-type ceiling fan loads. UL Listed to US and Canadian safety requirements. For indoor use only. For hardwired wall and ceiling lights. Offers smart lighting control without the Smart Bridge. Replaces one wired switchl. The kit can control up to 17 bulbs. Includes in-wall light dimmer, Lutron Claro wallplate, Pico remote and installation information.
LIGHT LED UTIL 2500L D2D GREY DIMMER INWALL WIRELESS WH     DIMMER INWALL ALL-LD ACCS
DIMMER INWALL WIRELESS WH
Our Price: $58.82
DIMMER INWALL ALL-LD ACCS
Our Price: $58.82
Energy saving, 4000K, CRI 80, 40,000 hours average life. Beam width 120 degrees. Operating voltage 110-240 volts, Operating temperature -40 to +122 degrees F. Turns standard lights into smart lights. Designed to connect to the Halo Home Bluetooth Mesh network with no hub or internet connection required. Can occupy any position in a multi-gang junction box, while the other positions of the junction box can be occupied by switches or other dimmers. Can be configured to work with the HALO Home In-wall Accessory dimmer to enable three-way lighting control within a space. Controls your HALO Home lighting devices from a central location. Designed to connect to the HALO Home Bluetooth Mesh network with no hub or internet connection required. Can occupy any position in a multi-gang junction box, while the other positions of the junction box can be occupied by switches or other dimmers. Can operate HALO Home lighting fixtures with single, 3-way or multi-switch controls. For standard lights, the Accessory Dimmer can be used for multi-switch control when paired with HALO Home In-wall Smart Dimmer.
ETI Lighting 54075142 Ceiling Light Fixture CCI Modern Security Farm Light CEIL LT FXT ACR/SHD LD BN 16IN
Used in residential, office, retail, restaurant, school, hospital, and hotel/motel locations in bathrooms, closets, utility rooms, interior hallways or interior stairwells. Can be wall or ceiling mounted. Round, white. 50,000 hours average rated life. UV, IR and mercury-free. UL/Cul Listed for damp locations. CCI Security Farm Light, High Pressure Sodium, Series: Modern, 120 V, ED17 Lamp, Medium E26 Lamp Base, 75 W Lamp, 1 Lamps, 24000 hr Average Life, 2100 K Color Temperature, Magnetic, R-NPF Ballast, Acrylic Housing, Powder Coated Housing, Includes: HPS Lamp, UL, cUL Listed, 6400 lumen Output, For Outdoor Applications Ceiling light fixture with acrylic shade
LIGHT SECURITY METAL HALID100W Powerzone 5990692 Electrical Cord LIGHT LED UTIL 4000L D2D GREY
Non-motion security light. Metal - plastic construction. Metal Halide bulb (included). Photocell ensures night only operation. 12.25"w x 13.75"d x 17.4375"h. 8.8 pounds. UL/cUL Listed. Twist-to-lock connector. 30 amp, 4 prong. Ultra heavy duty 10/4 STOW wire. Flame retardant. Double jacketed, super abrasion resistant. Used with 30 amp transfer system to store power from generator when AC power to main electrical is lost. Energy saving, 4000K, CRI 80, 40,000 hours average life. Beam width 120 degrees. Operating voltage 110-240 volts, Operating temperature -40 to +122 degrees F.
LIGHT LED RD DIM 4000K 15IN22W LIGHT LED 14IN SQ 22W BRS NIC ETI Lighting 54613142 Ceiling Light Fixture
Round LED lamp is used in commercial office, retail, restaurant, school, hospital, multi family, and hotel/motel locations in interior hallways, bedrooms, utility/laundry rooms, living rooms, or recreational rooms. 4000K, 50,000 hours average life. UV, IR and mercury free. UL/cUL Listed for damp locations. Used in residential, office, retail, restaurant, school, hospital, and hotel/motel locations in bathrooms, closets, utility rooms, interior hallways or interior stairwells. Can be wall or ceiling mounted. White. 4,000K, UV, IR and mercury-free. UL/Cul Listed for damp locations. Used in residential, office, retail, restaurant, school, hospital, and hotel/motel locations in bathrooms, closets, utility rooms, interior hallways or interior stairwells. Can be wall or ceiling mounted. White. 4,000K, UV, IR and mercury-free. UL/Cul Listed for damp locations.
ETI Lighting 54614142 Ceiling Light Fixture SWITCH 2TOGGLE COMBO 1P       SWITCH DIMMER SMART KIT
SWITCH 2TOGGLE COMBO 1P
Our Price: $97.72
SWITCH DIMMER SMART KIT
Our Price: $98.74
Used in residential, office, retail, restaurant, school, hospital, and hotel/motel locations in bathrooms, closets, utility rooms, interior hallways or interior stairwells. Can be wall or ceiling mounted. White. 4,000K, UV, IR and mercury-free. UL/Cul Listed for damp locations. Grounding terminal screw standard. Combination switch with additional switch has 120/277 volt rating, ideal for fluorescent lighting fixtures typical in commercial applications. 0.050" thick steel mounting strap zinc-plated for corrosion resistance. Break-off provision for wiring both devices on same circuit or on separate circuits. Terminal screws backed out and ready for wiring. Side wire terminals accept up to #10 solid or stranded wire. Combination slot/Phillips head mounting and terminal screws. Switches meet all UL 20 requirements. UL Listed. For hardwired lights. Provides smart lighting control in one room. Creates a smart system that can expand as needed. Replaces one wired switch. Includes Smart bridge, dimmer, Pico remote and wallplate.
CCI L1701 Weather-Tight Security Farm Light 13IN LED CEILING LIGHT BRZ    2PK 13IN CEILING LIGHT NICKEL
CCI Security Farm Light, Weather-Tight, ED17 Lamp, Medium E26 Lamp Base, 100 W Lamp, 1 Lamps, 10000 hr Average Life, 4000 K Color Temperature, Magnetic, HX-NPF Ballast, Tempered Glass Lens, Ceiling Mounting, Acrylic Housing, Powder Coated Bronze Housing, Includes: 10 in Acrylic Reflector, UL, cUL Listed, 10500 lumen Output. It uses a 100W Metal Halide ED17 bulb.
Cooper Lighting ALL-PRO AL3050LPC Area and Wall Light